$! BUILD_UNZIP.COM
$!
$! Build procedure for VMS versions of UnZip/ZipInfo and UnZipSFX.
$!
$! Last revised: 2009-03-01 SMS.
$!
$! Command arguments:
$! - suppress help file processing: "NOHELP"
$! - suppress message file processing: "NOMSG"
$! - select link-only: "LINK"
$! - select compiler environment: "VAXC", "DECC", "GNUC"
$! - select BZIP2 support: "USEBZ2"
$! This option is a shortcut for "IZ_BZIP2=SYS$DISK:[.bzip2]", and
$! runs the DCL build procedure there,
$! - select BZIP2 support: "IZ_BZIP2=dev:[dir]", where "dev:[dir]"
$! (or a suitable logical name) tells where to find "bzlib.h".
$! The BZIP2 object library (LIBBZ2_NS.OLB) is expected to be in
$! a "[.dest]" directory under that one ("dev:[dir.ALPHAL]", for
$! example), or in that directory itself.
$! By default, the SFX programs are built without BZIP2 support.
$! Add "BZIP2_SFX=1" to the LOCAL_UNZIP C macros to enable it.
$! (See LOCAL_UNZIP, below.)
$! - use ZLIB compression library: "IZ_ZLIB=dev:[dir]", where
$! "dev:[dir]" (or a suitable logical name) tells where to find
$! "zlib.h". The ZLIB object library (LIBZ.OLB) is expected to be
$! in a "[.dest]" directory under that one ("dev:[dir.ALPHAL]",
$! for example), or in that directory itself.
$! - select large-file support: "LARGE"
$! - select compiler listings: "LIST" Note that the whole argument
$! is added to the compiler command, so more elaborate options
$! like "LIST/SHOW=ALL" (quoted or space-free) may be specified.
$! - supply additional compiler options: "CCOPTS=xxx" Allows the
$! user to add compiler command options like /ARCHITECTURE or
$! /[NO]OPTIMIZE. For example, CCOPTS=/ARCH=HOST/OPTI=TUNE=HOST
$! or CCOPTS=/DEBUG/NOOPTI. These options must be quoted or
$! space-free.
$! - supply additional linker options: "LINKOPTS=xxx" Allows the
$! user to add linker command options like /DEBUG or /MAP. For
$! example: LINKOPTS=/DEBUG or LINKOPTS=/MAP/CROSS. These options
$! must be quoted or space-free. Default is
$! LINKOPTS=/NOTRACEBACK, but if the user specifies a LINKOPTS
$! string, /NOTRACEBACK will not be included unless specified by
$! the user.
$! - select installation of CLI interface version of UnZip:
$! "VMSCLI" or "CLI"
$! - force installation of UNIX interface version of UnZip
$! (override LOCAL_UNZIP environment): "NOVMSCLI" or "NOCLI"
$!
$! To specify additional options, define the symbol LOCAL_UNZIP
$! as a comma-separated list of the C macros to be defined, and
$! then run BUILD_UNZIP.COM. For example:
$!
$! $ LOCAL_UNZIP = "RETURN_CODES"
$! $ @ [.VMS]BUILD_UNZIP.COM
$!
$! VMS-specific options include VMSWILD and RETURN_CODES. See the
$! INSTALL file for other options (for example, CHECK_VERSIONS).
$!
$! If you edit this procedure to set LOCAL_UNZIP here, be sure to
$! use only one "=", to avoid affecting other procedures.
$!
$! Note: This command procedure always generates both the "default"
$! UnZip having the UNIX style command interface and the "VMSCLI"
$! UnZip having the CLI compatible command interface. There is no
$! need to add "VMSCLI" to the LOCAL_UNZIP symbol. (The only effect
$! of "VMSCLI" now is the selection of the CLI style UnZip
$! executable in the foreign command definition.)
$!
$!
$ on error then goto error
$ on control_y then goto error
$ OLD_VERIFY = f$verify( 0)
$!
$ edit := edit ! override customized edit commands
$ say := write sys$output
$!
$!##################### Read settings from environment ########################
$!
$ if (f$type( LOCAL_UNZIP) .eqs. "")
$ then
$ LOCAL_UNZIP = ""
$ else ! Trim blanks and append comma if missing
$ LOCAL_UNZIP = f$edit( LOCAL_UNZIP, "TRIM")
$ if (f$extract( (f$length( LOCAL_UNZIP)- 1), 1, LOCAL_UNZIP) .nes. ",")
$ then
$ LOCAL_UNZIP = LOCAL_UNZIP + ", "
$ endif
$ endif
$!
$! Check for the presence of "VMSCLI" in LOCAL_UNZIP. If yes, we will
$! define the foreign command for "unzip" to use the executable
$! containing the CLI interface.
$!
$ pos_cli = f$locate( "VMSCLI", LOCAL_UNZIP)
$ len_local_unzip = f$length( LOCAL_UNZIP)
$ if (pos_cli .ne. len_local_unzip)
$ then
$ CLI_IS_DEFAULT = 1
$ ! Remove "VMSCLI" macro from LOCAL_UNZIP. The UnZip executable
$ ! including the CLI interface is now created unconditionally.
$ LOCAL_UNZIP = f$extract( 0, pos_cli, LOCAL_UNZIP)+ -
f$extract( pos_cli+7, len_local_unzip- (pos_cli+ 7), LOCAL_UNZIP)
$ else
$ CLI_IS_DEFAULT = 0
$ endif
$ delete /symbol /local pos_cli
$ delete /symbol /local len_local_unzip
$!
$!##################### Customizing section #############################
$!
$ unzx_unx = "UNZIP"
$ unzx_cli = "UNZIP_CLI"
$ unzsfx_unx = "UNZIPSFX"
$ unzsfx_cli = "UNZIPSFX_CLI"
$!
$ CCOPTS = ""
$ IZ_BZIP2 = ""
$ BUILD_BZIP2 = 0
$ IZ_ZLIB = ""
$ LINKOPTS = "/notraceback"
$ LINK_ONLY = 0
$ LISTING = " /nolist"
$ LARGE_FILE = 0
$ MAKE_HELP = 1
$ MAKE_MSG = 1
$ MAY_USE_DECC = 1
$ MAY_USE_GNUC = 0
$!
$! Process command line parameters requesting optional features.
$!
$ arg_cnt = 1
$ argloop:
$ current_arg_name = "P''arg_cnt'"
$ curr_arg = f$edit( 'current_arg_name', "UPCASE")
$ if (curr_arg .eqs. "") then goto argloop_out
$!
$ if (f$extract( 0, 5, curr_arg) .eqs. "CCOPT")
$ then
$ opts = f$edit( curr_arg, "COLLAPSE")
$ eq = f$locate( "=", opts)
$ CCOPTS = f$extract( (eq+ 1), 1000, opts)
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 7, curr_arg) .eqs. "IZ_BZIP")
$ then
$ opts = f$edit( curr_arg, "COLLAPSE")
$ eq = f$locate( "=", opts)
$ IZ_BZIP2 = f$extract( (eq+ 1), 1000, opts)
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 6, curr_arg) .eqs. "USEBZ2")
$ then
$ if (IZ_BZIP2 .eqs. "")
$ then
$ IZ_BZIP2 = "SYS$DISK:[.BZIP2]"
$ BUILD_BZIP2 = 1
$ endif
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 7, curr_arg) .eqs. "IZ_ZLIB")
$ then
$ opts = f$edit( curr_arg, "COLLAPSE")
$ eq = f$locate( "=", opts)
$ IZ_ZLIB = f$extract( (eq+ 1), 1000, opts)
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 5, curr_arg) .eqs. "LARGE")
$ then
$ LARGE_FILE = 1
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 7, curr_arg) .eqs. "LINKOPT")
$ then
$ opts = f$edit( curr_arg, "COLLAPSE")
$ eq = f$locate( "=", opts)
$ LINKOPTS = f$extract( (eq+ 1), 1000, opts)
$ goto argloop_end
$ endif
$!
$! Note: LINK test must follow LINKOPTS test.
$!
$ if (f$extract( 0, 4, curr_arg) .eqs. "LINK")
$ then
$ LINK_ONLY = 1
$ goto argloop_end
$ endif
$!
$ if (f$extract( 0, 4, curr_arg) .eqs. "LIST")
$ then
$ LISTING = "/''curr_arg'" ! But see below for mods.
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "NOHELP")
$ then
$ MAKE_HELP = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "NOMSG")
$ then
$ MAKE_MSG = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "VAXC")
$ then
$ MAY_USE_DECC = 0
$ MAY_USE_GNUC = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "DECC")
$ then
$ MAY_USE_DECC = 1
$ MAY_USE_GNUC = 0
$ goto argloop_end
$ endif
$!
$ if (curr_arg .eqs. "GNUC")
$ then
$ MAY_USE_DECC = 0
$ MAY_USE_GNUC = 1
$ goto argloop_end
$ endif
$!
$ if ((curr_arg .eqs. "VMSCLI") .or. (curr_arg .eqs. "CLI"))
$ then
$ CLI_IS_DEFAULT = 1
$ goto argloop_end
$ endif
$!
$ if ((curr_arg .eqs. "NOVMSCLI") .or. (curr_arg .eqs. "NOCLI"))
$ then
$ CLI_IS_DEFAULT = 0
$ goto argloop_end
$ endif
$!
$ say "Unrecognized command-line option: ''curr_arg'"
$ goto error
$!
$ argloop_end:
$ arg_cnt = arg_cnt + 1
$ goto argloop
$ argloop_out:
$!
$ if (CLI_IS_DEFAULT)
$ then
$ UNZEXEC = unzx_cli
$ else
$ UNZEXEC = unzx_unx
$ endif
$!
$!#######################################################################
$!
$! Find out current disk, directory, compiler and options
$!
$ workdir = f$environment( "default")
$ here = f$parse( workdir, , , "device")+ f$parse( workdir, , , "directory")
$!
$! Sense the host architecture (Alpha, Itanium, or VAX).
$!
$ if (f$getsyi( "HW_MODEL") .lt. 1024)
$ then
$ arch = "VAX"
$ else
$ if (f$getsyi( "ARCH_TYPE") .eq. 2)
$ then
$ arch = "ALPHA"
$ else
$ if (f$getsyi( "ARCH_TYPE") .eq. 3)
$ then
$ arch = "IA64"
$ else
$ arch = "unknown_arch"
$ endif
$ endif
$ endif
$!
$ dest = arch
$ cmpl = "DEC/Compaq/HP C"
$ opts = ""
$ if (arch .nes. "VAX")
$ then
$ HAVE_DECC_VAX = 0
$ USE_DECC_VAX = 0
$!
$ if (MAY_USE_GNUC)
$ then
$ say "GNU C is not supported for ''arch'."
$ say "You must use DEC/Compaq/HP C to build UnZip."
$ goto error
$ endif
$!
$ if (.not. MAY_USE_DECC)
$ then
$ say "VAX C is not supported for ''arch'."
$ say "You must use DEC/Compaq/HP C to build UnZip."
$ goto error
$ endif
$!
$ cc = "cc /standard = relax /prefix = all /ansi"
$ defs = "''LOCAL_UNZIP'MODERN"
$ if (LARGE_FILE .ne. 0)
$ then
$ defs = "LARGE_FILE_SUPPORT, ''defs'"
$ endif
$ else
$ if (LARGE_FILE .ne. 0)
$ then
$ say "LARGE_FILE_SUPPORT is not available on VAX."
$ LARGE_FILE = 0
$ endif
$ HAVE_DECC_VAX = (f$search( "SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
$ HAVE_VAXC_VAX = (f$search( "SYS$SYSTEM:VAXC.EXE") .nes. "")
$ MAY_HAVE_GNUC = (f$trnlnm( "GNU_CC") .nes. "")
$ if (HAVE_DECC_VAX .and. MAY_USE_DECC)
$ then
$ ! We use DECC:
$ USE_DECC_VAX = 1
$ cc = "cc /decc /prefix = all"
$ defs = "''LOCAL_UNZIP'MODERN"
$ else
$ ! We use VAXC (or GNU C):
$ USE_DECC_VAX = 0
$ defs = "''LOCAL_UNZIP'VMS"
$ if ((.not. HAVE_VAXC_VAX .and. MAY_HAVE_GNUC) .or. MAY_USE_GNUC)
$ then
$ cc = "gcc"
$ dest = "''dest'G"
$ cmpl = "GNU C"
$ opts = "GNU_CC:[000000]GCCLIB.OLB /LIBRARY,"
$ else
$ if (HAVE_DECC_VAX)
$ then
$ cc = "cc /vaxc"
$ else
$ cc = "cc"
$ endif
$ dest = "''dest'V"
$ cmpl = "VAX C"
$ endif
$ opts = "''opts' SYS$DISK:[.''dest']VAXCSHR.OPT /OPTIONS,"
$ endif
$ endif
$!
$ if (IZ_BZIP2 .nes. "")
$ then
$ defs = "USE_BZIP2, ''defs'"
$ endif
$!
$! Reveal the plan. If compiling, set some compiler options.
$!
$ if (LINK_ONLY)
$ then
$ say "Linking on ''arch' for ''cmpl'."
$ else
$ say "Compiling on ''arch' using ''cmpl'."
$!
$ DEF_UNX = "/define = (''defs')"
$ DEF_CLI = "/define = (''defs', VMSCLI)"
$ DEF_SXUNX = "/define = (''defs', SFX)"
$ DEF_SXCLI = "/define = (''defs', VMSCLI, SFX)"
$ endif
$!
$! Search directory for BZIP2.
$!
$ if (BUILD_BZIP2)
$ then
$! Our own BZIP2 directory.
$ seek_bz = dest
$ else
$! User-specified BZIP2 directory.
$ seek_bz = arch
$ endif
$!
$! Search directory for ZLIB.
$!
$ seek_zl = arch
$!
$! Change the destination directory, if the large-file option is enabled.
$!
$ if (LARGE_FILE .ne. 0)
$ then
$ dest = "''dest'L"
$ endif
$!
$! If BZIP2 support was selected, find the header file and object
$! library. Complain if things fail.
$!
$ cc_incl = "[]"
$ lib_bzip2_opts = ""
$ if (IZ_BZIP2 .nes. "")
$ then
$ bz2_olb = "LIBBZ2_NS.OLB"
$ if (.not. LINK_ONLY)
$ then
$ define incl_bzip2 'IZ_BZIP2'
$ if (BUILD_BZIP2 .and. (IZ_BZIP2 .eqs. "SYS$DISK:[.BZIP2]"))
$ then
$ set def [.BZIP2]
$ @buildbz2.com
$ set def [-]
$ endif
$ endif
$!
$ @ [.VMS]FIND_BZIP2_LIB.COM 'IZ_BZIP2' 'seek_bz' 'bz2_olb' lib_bzip2
$ if (f$trnlnm( "lib_bzip2") .eqs. "")
$ then
$ say "Can't find BZIP2 object library. Can't link."
$ goto error
$ else
$ lib_bzip2_opts = "lib_bzip2:''bz2_olb' /library,"
$ cc_incl = cc_incl+ ", [.VMS]"
$ endif
$ endif
$!
$! If ZLIB use was selected, find the object library.
$! Complain if things fail.
$!
$ lib_zlib_opts = ""
$ if (IZ_ZLIB .nes. "")
$ then
$ zlib_olb = "LIBZ.OLB"
$ define incl_zlib 'IZ_ZLIB'
$ defs = "''defs', USE_ZLIB"
$ @ [.VMS]FIND_BZIP2_LIB.COM 'IZ_ZLIB' 'seek_zl' 'zlib_olb' lib_zlib
$ if (f$trnlnm( "lib_zlib") .eqs. "")
$ then
$ say "Can't find ZLIB object library. Can't link."
$ goto error
$ else
$ lib_zlib_opts = "lib_zlib:''zlib_olb' /library, "
$ if (f$locate( "[.VMS]", cc_incl) .ge. f$length( cc_incl))
$ then
$ cc_incl = cc_incl+ ", [.VMS]"
$ endif
$ @ [.VMS]FIND_BZIP2_LIB.COM 'IZ_ZLIB' -
contrib.infback9 infback9.h'zlib_olb' incl_zlib_contrib_infback9
$ endif
$ endif
$!
$! If [.'dest'] does not exist, either complain (link-only) or make it.
$!
$ if (f$search( "''dest'.dir;1") .eqs. "")
$ then
$ if (LINK_ONLY)
$ then
$ say "Can't find directory ""[.''dest']"". Can't link."
$ goto error
$ else
$ create /directory [.'dest']
$ endif
$ endif
$!
$ if (.not. LINK_ONLY)
$ then
$!
$! Arrange to get arch-specific list file placement, if listing, and if
$! the user didn't specify a particular "/LIST =" destination.
$!
$ L = f$edit( LISTING, "COLLAPSE")
$ if ((f$extract( 0, 5, L) .eqs. "/LIST") .and. -
(f$extract( 4, 1, L) .nes. "="))
$ then
$ LISTING = " /LIST = [.''dest']"+ f$extract( 5, 1000, LISTING)
$ endif
$!
$! Define compiler command.
$!
$ cc = cc+ " /include = (''cc_incl')"+ LISTING+ CCOPTS
$!
$ endif
$!
$! Define linker command.
$!
$ link = "link ''LINKOPTS'"
$!
$! Make a VAXCRTL options file for GNU C or VAC C, if needed.
$!
$ if ((opts .nes. "") .and. -
(f$locate( "VAXCSHR", f$edit( opts, "UPCASE")) .lt. f$length( opts)) .and. -
(f$search( "[.''dest']VAXCSHR.OPT") .eqs. ""))
$ then
$ open /write opt_file_ln [.'dest']VAXCSHR.OPT
$ write opt_file_ln "SYS$SHARE:VAXCRTL.EXE /SHARE"
$ close opt_file_ln
$ endif
$!
$! Show interesting facts.
$!
$ say " architecture = ''arch' (destination = [.''dest'])"
$ if (IZ_BZIP2 .nes. "")
$ then
$ if (.not. LINK_ONLY)
$ then
$ say " BZIP2 include dir: ''f$trnlnm( "incl_bzip2")'"
$ endif
$ say " BZIP2 library dir: ''f$trnlnm( "lib_bzip2")'"
$ endif
$ if (IZ_ZLIB .nes. "")
$ then
$ if (.not. LINK_ONLY)
$ then
$ say " ZLIB include dir: ''f$trnlnm( "incl_zlib")'"
$ endif
$ say " ZLIB library dir: ''f$trnlnm( "lib_zlib")'"
$ endif
$ if (.not. LINK_ONLY)
$ then
$ say " cc = ''cc'"
$ endif
$ say " link = ''link'"
$ if (.not. MAKE_HELP)
$ then
$ say " Not making new help files."
$ endif
$ if (.not. MAKE_MSG)
$ then
$ say " Not making new message files."
$ endif
$ say ""
$!
$ tmp = f$verify( 1) ! Turn echo on to see what's happening.
$!
$!------------------------------- UnZip section ------------------------------
$!
$ if (.not. LINK_ONLY)
$ then
$!
$! Process the help file, if desired.
$!
$ if (MAKE_HELP)
$ then
$ runoff /out = UNZIP.HLP [.VMS]UNZIP_DEF.RNH
$ endif
$!
$! Process the message file, if desired.
$!
$ if (MAKE_MSG)
$ then
$ message /object = [.'dest']UNZIP_MSG.OBJ /nosymbols -
[.VMS]UNZIP_MSG.MSG
$ link /shareable = [.'dest']UNZIP_MSG.EXE [.'dest']UNZIP_MSG.OBJ
$ endif
$!
$! Compile the sources.
$!
$ cc 'DEF_UNX' /object = [.'dest']UNZIP.OBJ UNZIP.C
$ cc 'DEF_UNX' /object = [.'dest']CRC32.OBJ CRC32.C
$ cc 'DEF_UNX' /object = [.'dest']CRYPT.OBJ CRYPT.C
$ cc 'DEF_UNX' /object = [.'dest']ENVARGS.OBJ ENVARGS.C
$ cc 'DEF_UNX' /object = [.'dest']EXPLODE.OBJ EXPLODE.C
$ cc 'DEF_UNX' /object = [.'dest']EXTRACT.OBJ EXTRACT.C
$ cc 'DEF_UNX' /object = [.'dest']FILEIO.OBJ FILEIO.C
$ cc 'DEF_UNX' /object = [.'dest']GLOBALS.OBJ GLOBALS.C
$ cc 'DEF_UNX' /object = [.'dest']INFLATE.OBJ INFLATE.C
$ cc 'DEF_UNX' /object = [.'dest']LIST.OBJ LIST.C
$ cc 'DEF_UNX' /object = [.'dest']MATCH.OBJ MATCH.C
$ cc 'DEF_UNX' /object = [.'dest']PROCESS.OBJ PROCESS.C
$ cc 'DEF_UNX' /object = [.'dest']TTYIO.OBJ TTYIO.C
$ cc 'DEF_UNX' /object = [.'dest']UBZ2ERR.OBJ UBZ2ERR.C
$ cc 'DEF_UNX' /object = [.'dest']UNREDUCE.OBJ UNREDUCE.C
$ cc 'DEF_UNX' /object = [.'dest']UNSHRINK.OBJ UNSHRINK.C
$ cc 'DEF_UNX' /object = [.'dest']ZIPINFO.OBJ ZIPINFO.C
$ cc 'DEF_UNX' /object = [.'dest']VMS.OBJ [.VMS]VMS.C
$!
$! Create the object library.
$!
$ if (f$search( "[.''dest']UNZIP.OLB") .eqs. "") then -
libr /object /create [.'dest']UNZIP.OLB
$!
$ libr /object /replace [.'dest']UNZIP.OLB -
[.'dest']CRC32.OBJ, -
[.'dest']CRYPT.OBJ, -
[.'dest']ENVARGS.OBJ, -
[.'dest']EXPLODE.OBJ, -
[.'dest']EXTRACT.OBJ, -
[.'dest']FILEIO.OBJ, -
[.'dest']GLOBALS.OBJ, -
[.'dest']INFLATE.OBJ, -
[.'dest']LIST.OBJ, -
[.'dest']MATCH.OBJ, -
[.'dest']PROCESS.OBJ, -
[.'dest']TTYIO.OBJ, -
[.'dest']UBZ2ERR.OBJ, -
[.'dest']UNREDUCE.OBJ, -
[.'dest']UNSHRINK.OBJ, -
[.'dest']ZIPINFO.OBJ, -
[.'dest']VMS.OBJ
$!
$ endif
$!
$! Link the executable.
$!
$ link /executable = [.'dest']'unzx_unx'.EXE -
SYS$DISK:[.'dest']UNZIP.OBJ, -
SYS$DISK:[.'dest']UNZIP.OLB /library, -
'lib_bzip2_opts' -
SYS$DISK:[.'dest']UNZIP.OLB /library, -
'lib_zlib_opts' -
'opts' -
SYS$DISK:[.VMS]UNZIP.OPT /options
$!
$!----------------------- UnZip (CLI interface) section ----------------------
$!
$ if (.not. LINK_ONLY)
$ then
$!
$! Process the CLI help file, if desired.
$!
$ if (MAKE_HELP)
$ then
$ set default [.VMS]
$ edit /tpu /nosection /nodisplay /command = CVTHELP.TPU -
UNZIP_CLI.HELP
$ set default [-]
$ runoff /output = UNZIP_CLI.HLP [.VMS]UNZIP_CLI.RNH
$ endif
$!
$! Compile the CLI sources.
$!
$ cc 'DEF_CLI' /object = [.'dest']UNZIPCLI.OBJ UNZIP.C
$ cc 'DEF_CLI' /object = [.'dest']CMDLINE.OBJ -
[.VMS]CMDLINE.C
$!
$! Create the command definition object file.
$!
$ set command /object = [.'dest']UNZ_CLI.OBJ [.VMS]UNZ_CLI.CLD
$!
$! Create the CLI object library.
$!
$ if (f$search( "[.''dest']UNZIPCLI.OLB") .eqs. "") then -
libr /object /create [.'dest']UNZIPCLI.OLB
$!
$ libr /object /replace [.'dest']UNZIPCLI.OLB -
[.'dest']CMDLINE.OBJ, -
[.'dest']UNZ_CLI.OBJ
$!
$ endif
$!
$! Link the CLI executable.
$!
$ link /executable = [.'dest']'unzx_cli'.EXE -
SYS$DISK:[.'dest']UNZIPCLI.OBJ, -
SYS$DISK:[.'dest']UNZIPCLI.OLB /library, -
SYS$DISK:[.'dest']UNZIP.OLB /library, -
'lib_bzip2_opts' -
SYS$DISK:[.'dest']UNZIP.OLB /library, -
'lib_zlib_opts' -
'opts' -
SYS$DISK:[.VMS]UNZIP.OPT /options
$!
$!-------------------------- UnZipSFX section --------------------------------
$!
$ if (.not. LINK_ONLY)
$ then
$!
$! Compile the variant SFX sources.
$!
$ cc 'DEF_SXUNX' /object = [.'dest']UNZIPSFX.OBJ UNZIP.C
$ cc 'DEF_SXUNX' /object = [.'dest']CRC32_.OBJ CRC32.C
$ cc 'DEF_SXUNX' /object = [.'dest']CRYPT_.OBJ CRYPT.C
$ cc 'DEF_SXUNX' /object = [.'dest']EXTRACT_.OBJ EXTRACT.C
$ cc 'DEF_SXUNX' /object = [.'dest']FILEIO_.OBJ FILEIO.C
$ cc 'DEF_SXUNX' /object = [.'dest']GLOBALS_.OBJ GLOBALS.C
$ cc 'DEF_SXUNX' /object = [.'dest']INFLATE_.OBJ INFLATE.C
$ cc 'DEF_SXUNX' /object = [.'dest']MATCH_.OBJ MATCH.C
$ cc 'DEF_SXUNX' /object = [.'dest']PROCESS_.OBJ PROCESS.C
$ cc 'DEF_SXUNX' /object = [.'dest']TTYIO_.OBJ TTYIO.C
$ cc 'DEF_SXUNX' /object = [.'dest']UBZ2ERR_.OBJ UBZ2ERR.C
$ cc 'DEF_SXUNX' /object = [.'dest']VMS_.OBJ [.VMS]VMS.C
$!
$! Create the SFX object library.
$!
$ if (f$search( "[.''dest']UNZIPSFX.OLB") .eqs. "") then -
libr /object /create [.'dest']UNZIPSFX.OLB
$!
$ libr /object /replace [.'dest']UNZIPSFX.OLB -
[.'dest']CRC32_.OBJ, -
[.'dest']CRYPT_.OBJ, -
[.'dest']EXTRACT_.OBJ, -
[.'dest']FILEIO_.OBJ, -
[.'dest']GLOBALS_.OBJ, -
[.'dest']INFLATE_.OBJ, -
[.'dest']MATCH_.OBJ, -
[.'dest']PROCESS_.OBJ, -
[.'dest']TTYIO_.OBJ, -
[.'dest']UBZ2ERR_.OBJ, -
[.'dest']VMS_.OBJ
$!
$ endif
$!
$! Link the SFX executable.
$!
$ link /executable = [.'dest']'unzsfx_unx'.EXE -
SYS$DISK:[.'dest']UNZIPSFX.OBJ, -
SYS$DISK:[.'dest']UNZIPSFX.OLB /library, -
'lib_bzip2_opts' -
SYS$DISK:[.'dest']UNZIPSFX.OLB /library, -
'lib_zlib_opts' -
'opts' -
SYS$DISK:[.VMS]UNZIPSFX.OPT /options
$!
$!--------------------- UnZipSFX (CLI interface) section ---------------------
$!
$ if (.not. LINK_ONLY)
$ then
$!
$! Compile the SFX CLI sources.
$!
$ cc 'DEF_SXCLI' /object = [.'dest']UNZSXCLI.OBJ UNZIP.C
$ cc 'DEF_SXCLI' /object = [.'dest']CMDLINE_.OBJ -
[.VMS]CMDLINE.C
$!
$! Create the SFX CLI object library.
$!
$ if (f$search( "[.''dest']UNZSXCLI.OLB") .eqs. "") then -
libr /object /create [.'dest']UNZSXCLI.OLB
$!
$ libr /object /replace [.'dest']UNZSXCLI.OLB -
[.'dest']CMDLINE_.OBJ, -
[.'dest']UNZ_CLI.OBJ
$!
$ endif
$!
$! Link the SFX CLI executable.
$!
$ link /executable = [.'dest']'unzsfx_cli'.EXE -
SYS$DISK:[.'dest']UNZSXCLI.OBJ, -
SYS$DISK:[.'dest']UNZSXCLI.OLB /library, -
SYS$DISK:[.'dest']UNZIPSFX.OLB /library, -
'lib_bzip2_opts' -
SYS$DISK:[.'dest']UNZIPSFX.OLB /library, -
'lib_zlib_opts' -
'opts' -
SYS$DISK:[.VMS]UNZIPSFX.OPT /options
$!
$!----------------------------- Symbols section ------------------------------
$!
$ there = here- "]"+ ".''dest']"
$!
$! Define the foreign command symbols. Similar commands may be useful
$! in SYS$MANAGER:SYLOGIN.COM and/or users' LOGIN.COM.
$!
$ unzip == "$''there'''unzexec'.EXE"
$ zipinfo == "$''there'''unzexec'.EXE ""-Z"""
$!
$! Deassign the temporary process logical names, restore the original
$! default directory, and restore the DCL verify status.
$!
$ error:
$!
$ if (IZ_BZIP2 .nes. "")
$ then
$ if (f$trnlnm( "incl_bzip2", "LNM$PROCESS_TABLE") .nes. "")
$ then
$ deassign incl_bzip2
$ endif
$ if (f$trnlnm( "lib_bzip2", "LNM$PROCESS_TABLE") .nes. "")
$ then
$ deassign lib_bzip2
$ endif
$ endif
$!
$ if (IZ_ZLIB .nes. "")
$ then
$ if (f$trnlnm( "incl_zlib", "LNM$PROCESS_TABLE") .nes. "")
$ then
$ deassign incl_zlib
$ endif
$ if (f$trnlnm( "incl_zlib_contrib_infback9", -
"LNM$PROCESS_TABLE") .nes. "")
$ then
$ deassign incl_zlib_contrib_infback9
$ endif
$ if (f$trnlnm( "lib_zlib", "LNM$PROCESS_TABLE") .nes. "")
$ then
$ deassign lib_zlib
$ endif
$ endif
$!
$ if (f$type( here) .nes. "")
$ then
$ if (here .nes. "")
$ then
$ set default 'here'
$ endif
$ endif
$!
$ if (f$type( OLD_VERIFY) .nes. "")
$ then
$ tmp = f$verify( OLD_VERIFY)
$ endif
$!
$ exit
$!