;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2013. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; HTTP library for KolibriOS ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; references:
; "HTTP made really easy", http://www.jmarshall.com/easy/http/
; "Hypertext Transfer Protocol -- HTTP/1.1", http://tools.ietf.org/html/rfc2616
URLMAXLEN = 65535
BUFFERSIZE = 4096
__DEBUG__ = 1
__DEBUG_LEVEL__ = 1
format MS COFF
public @EXPORT as 'EXPORTS'
include '../../../struct.inc'
include '../../../proc32.inc'
include '../../../macros.inc'
purge section,mov,add,sub
include '../../../debug-fdo.inc'
include '../../../network.inc'
include 'http.inc'
virtual at 0
http_msg http_msg
end virtual
macro copy_till_zero {
@@:
lodsb
test al, al
jz @f
stosb
jmp @r
@@:
}
macro HTTP_init_buffer buffer, socketnum {
mov eax, buffer
push socketnum
popd [eax + http_msg.socket]
lea esi, [eax + http_msg.data]
mov [eax + http_msg.flags], 0
mov [eax + http_msg.write_ptr], esi
mov [eax + http_msg.buffer_length], BUFFERSIZE - http_msg.data
mov [eax + http_msg.chunk_ptr], 0
mov [eax + http_msg.status], 0
mov [eax + http_msg.header_length], 0
mov [eax + http_msg.content_length], 0
mov [eax + http_msg.content_received], 0
}
section '.flat' code readable align 16
;;===========================================================================;;
lib_init: ;//////////////////////////////////////////////////////////////////;;
;;---------------------------------------------------------------------------;;
;? Library entry point (called after library load) ;;
;;---------------------------------------------------------------------------;;
;> eax = pointer to memory allocation routine ;;
;> ebx = pointer to memory freeing routine ;;
;> ecx = pointer to memory reallocation routine ;;
;> edx = pointer to library loading routine ;;
;;---------------------------------------------------------------------------;;
;< eax = 1 (fail) / 0 (ok) (library initialization result) ;;
;;===========================================================================;;
mov [mem.alloc], eax
mov [mem.free], ebx
mov [mem.realloc], ecx
mov [dll.load], edx
invoke dll.load, @IMPORT
or eax, eax
jz .ok
; load proxy settings
invoke ini.get_str, inifile, sec_proxy, key_proxy, proxyAddr, 256, proxyAddr
invoke ini.get_int, inifile, sec_proxy, key_proxyport, 80
mov [proxyPort], eax
invoke ini.get_str, inifile, sec_proxy, key_user, proxyUser, 256, proxyUser
invoke ini.get_str, inifile, sec_proxy, key_password, proxyPassword, 256, proxyPassword
xor eax, eax
inc eax
ret
.ok:
xor eax, eax
ret
;;================================================================================================;;
proc HTTP_get URL ;///////////////////////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Initiates a HTTP connection, using 'GET' method. ;;
;;------------------------------------------------------------------------------------------------;;
;> URL = pointer to ASCIIZ URL ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / buffer ptr ;;
;;================================================================================================;;
locals
hostname dd ?
pageaddr dd ?
sockaddr dd ?
socketnum dd ?
buffer dd ?
port dd ?
endl
; split the URL into hostname and pageaddr
stdcall parse_url, [URL]
test eax, eax
jz .error
mov [hostname], eax
mov [pageaddr], ebx
; Do we need to use a proxy?
cmp [proxyAddr], 0
jne .proxy_done
.proxy_done:
;;;;
mov [port], 80 ;;;; FIXME
; Connect to the other side.
stdcall open_connection, [hostname], [port]
test eax, eax
jz .error
mov [socketnum], eax
; Create the HTTP request.
invoke mem.alloc, BUFFERSIZE
test eax, eax
jz .error
mov [buffer], eax
mov edi, eax
DEBUGF 1, "Buffer has been allocated.\n"
mov esi, str_get
copy_till_zero
mov esi, [pageaddr]
copy_till_zero
mov esi, str_http11
mov ecx, str_http11.length
rep movsb
mov esi, [hostname]
copy_till_zero
mov esi, str_close
mov ecx, str_close.length
rep movsb
mov byte[edi], 0
DEBUGF 1, "Request:\n%s", [buffer]
; Send the request
mov esi, edi
sub esi, [buffer] ; length
xor edi, edi ; flags
mcall send, [socketnum], [buffer]
test eax, eax
jz .error
DEBUGF 1, "Request has been sent to server.\n"
HTTP_init_buffer [buffer], [socketnum]
ret ; return buffer ptr
.error:
DEBUGF 1, "Error!\n"
xor eax, eax ; return 0 = error
ret
endp
;;================================================================================================;;
proc HTTP_head URL ;//////////////////////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Initiates a HTTP connection, using 'HEAD' method. ;;
;;------------------------------------------------------------------------------------------------;;
;> URL = pointer to ASCIIZ URL ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / buffer ptr ;;
;;================================================================================================;;
locals
hostname dd ?
pageaddr dd ?
sockaddr dd ?
socketnum dd ?
buffer dd ?
port dd ?
endl
; split the URL into hostname and pageaddr
stdcall parse_url, [URL]
test eax, eax
jz .error
mov [hostname], eax
mov [pageaddr], ebx
; Do we need to use a proxy?
cmp [proxyAddr], 0
jne .proxy_done
; TODO: set hostname to that of the
.proxy_done:
;;;;
mov [port], 80 ;;;; FIXME
; Connect to the other side.
stdcall open_connection, [hostname], [port]
test eax, eax
jz .error
mov [socketnum], eax
; Create the HTTP request.
invoke mem.alloc, BUFFERSIZE
test eax, eax
jz .error
mov [buffer], eax
mov edi, eax
DEBUGF 1, "Buffer has been allocated.\n"
mov esi, str_head
copy_till_zero
mov esi, [pageaddr]
copy_till_zero
mov esi, str_http11
mov ecx, str_http11.length
rep movsb
mov esi, [hostname]
copy_till_zero
mov esi, str_close
mov ecx, str_close.length
rep movsb
mov byte[edi], 0
DEBUGF 1, "Request:\n%s", [buffer]
; Send the request
mov esi, edi
sub esi, [buffer] ; length
xor edi, edi ; flags
mcall send, [socketnum], [buffer]
test eax, eax
jz .error
DEBUGF 1, "Request has been sent to server.\n"
HTTP_init_buffer [buffer], [socketnum]
ret ; return buffer ptr
.error:
DEBUGF 1, "Error!\n"
xor eax, eax ; return 0 = error
ret
endp
;;================================================================================================;;
proc HTTP_post URL, content_type, content_length ;////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Initiates a HTTP connection, using 'GET' method. ;;
;;------------------------------------------------------------------------------------------------;;
;> URL = pointer to ASCIIZ URL ;;
;> content_type = pointer to ASCIIZ string containing content type ;;
;> content_length = length of content (in bytes) ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / buffer ptr ;;
;;================================================================================================;;
locals
hostname dd ?
pageaddr dd ?
sockaddr dd ?
socketnum dd ?
buffer dd ?
port dd ?
endl
; split the URL into hostname and pageaddr
stdcall parse_url, [URL]
test eax, eax
jz .error
mov [hostname], eax
mov [pageaddr], ebx
; Do we need to use a proxy?
cmp [proxyAddr], 0
jne .proxy_done
; TODO: set hostname to that of the
.proxy_done:
;;;;
mov [port], 80 ;;;; FIXME
; Connect to the other side.
stdcall open_connection, [hostname], [port]
test eax, eax
jz .error
mov [socketnum], eax
; Create the HTTP request.
invoke mem.alloc, BUFFERSIZE
test eax, eax
jz .error
mov [buffer], eax
mov edi, eax
DEBUGF 1, "Buffer has been allocated.\n"
mov esi, str_post
copy_till_zero
mov esi, [pageaddr]
copy_till_zero
mov esi, str_http11
mov ecx, str_http11.length
rep movsb
mov esi, [hostname]
copy_till_zero
mov esi, str_post_cl
mov ecx, str_post_cl.length
rep movsb
mov eax, [content_length]
call ascii_dec
mov esi, str_post_ct
mov ecx, str_post_ct.length
rep movsb
mov esi, [content_type]
rep movsb
mov esi, str_close
mov ecx, str_close.length
rep movsb
mov byte[edi], 0
DEBUGF 1, "Request:\n%s", [buffer]
; Send the request
mov esi, edi
sub esi, [buffer] ; length
xor edi, edi ; flags
mcall send, [socketnum], [buffer]
test eax, eax
jz .error
DEBUGF 1, "Request has been sent to server.\n"
HTTP_init_buffer [buffer], [socketnum]
; mov eax, [buffer]
ret ; return buffer ptr
.error:
DEBUGF 1, "Error!\n"
xor eax, eax ; return 0 = error
ret
endp
;;================================================================================================;;
proc HTTP_process identifier ;////////////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Receive data from the server, parse headers and put data in receive buffer. ;;
;? To complete a transfer, this procedure must be called over and over again untill it returns 0. ;;
;;------------------------------------------------------------------------------------------------;;
;> identifier = pointer to buffer containing http_msg struct. ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = -1 (not finished) / 0 finished ;;
;;================================================================================================;;
pusha
mov ebp, [identifier]
; Receive some data
mcall recv, [ebp + http_msg.socket], [ebp + http_msg.write_ptr], \
[ebp + http_msg.buffer_length], MSG_DONTWAIT
cmp eax, 0xffffffff
je .check_socket
DEBUGF 1, "Received %u bytes\n", eax
; Update pointers
mov edi, [ebp + http_msg.write_ptr]
add [ebp + http_msg.write_ptr], eax
sub [ebp + http_msg.buffer_length], eax
jz .got_all_data
; If data is chunked, combine chunks into contiguous data.
test [ebp + http_msg.flags], FLAG_CHUNKED
jnz .chunk_loop
; Did we detect the header yet?
test [ebp + http_msg.flags], FLAG_GOT_HEADER
jnz .header_parsed
push eax
; We havent found the header yet, search for it..
sub eax, 4
jl .need_more_data_pop
.scan:
; scan for end of header (empty line)
cmp dword[edi], 0x0a0d0a0d ; end of header
je .end_of_header
cmp word[edi+2], 0x0a0a
je .end_of_header
inc edi
dec eax
jnz .scan
jmp .need_more_data_pop
.end_of_header:
add edi, 4 - http_msg.data
sub edi, ebp
mov [ebp + http_msg.header_length], edi
or [ebp + http_msg.flags], FLAG_GOT_HEADER
DEBUGF 1, "Header length: %u\n", edi
; Ok, we have found header:
cmp dword[ebp + http_msg.data], 'HTTP'
jne .invalid_header
cmp dword[ebp + http_msg.data+4], '/1.0'
je .http_1.0
cmp dword[ebp + http_msg.data+4], '/1.1'
jne .invalid_header
or [ebp + http_msg.flags], FLAG_HTTP11
.http_1.0:
cmp byte[ebp + http_msg.data+8], ' '
jne .invalid_header
DEBUGF 1, "Header seems valid.\n"
lea esi, [ebp + http_msg.data+9]
xor eax, eax
xor ebx, ebx
mov ecx, 3
.statusloop:
lodsb
sub al, '0'
jb .invalid_header
cmp al, 9
ja .invalid_header
lea ebx, [ebx + 4*ebx]
shl ebx, 1
add ebx, eax
dec ecx
jnz .statusloop
mov [ebp + http_msg.status], ebx
DEBUGF 1, "Status: %u\n", ebx
; Now, convert all header names to lowercase.
; This way, it will be much easier to find certain header fields, later on.
lea esi, [ebp + http_msg.data]
mov ecx, [ebp + http_msg.header_length]
.need_newline:
inc esi
dec ecx
jz .convert_done
cmp byte[esi], 10
jne .need_newline
; Ok, we have a newline, a line beginning with space or tabs has no header fields.
inc esi
dec ecx
jz .convert_done
cmp byte[esi], ' '
je .need_newline
cmp byte[esi], 9 ; horizontal tab
je .need_newline
jmp .convert_loop
.next_char:
inc esi
dec ecx
jz .convert_done
.convert_loop:
cmp byte[esi], ':'
je .need_newline
cmp byte[esi], 'A'
jb .next_char
cmp byte[esi], 'Z'
ja .next_char
or byte[esi], 0x20 ; convert to lowercase
jmp .next_char
.convert_done:
mov byte[esi-1], 0
lea esi, [ebp + http_msg.data]
DEBUGF 1, "Header names converted to lowercase:\n%s\n", esi
; Check for content-length header field.
stdcall find_header_field, ebp, str_cl
test eax, eax
jz .no_content
or [ebp + http_msg.flags], FLAG_CONTENT_LENGTH
xor edx, edx
.cl_loop:
movzx ebx, byte[eax]
inc eax
cmp bl, 10
je .cl_ok
cmp bl, 13
je .cl_ok
cmp bl, ' '
je .cl_ok
sub bl, '0'
jb .invalid_header
cmp bl, 9
ja .invalid_header
lea edx, [edx + edx*4] ; edx = edx*10
shl edx, 1 ;
add edx, ebx
jmp .cl_loop
.cl_ok:
mov [ebp + http_msg.content_length], edx
DEBUGF 1, "Content-length: %u\n", edx
; Resize buffer according to content-length.
add edx, [ebp + http_msg.header_length]
add edx, http_msg.data
mov ecx, edx
sub ecx, [ebp + http_msg.write_ptr]
mov [ebp + http_msg.buffer_length], ecx
invoke mem.realloc, ebp, edx
or eax, eax
jz .no_ram_pop
pop eax
sub eax, [ebp + http_msg.header_length]
jmp .header_parsed ; hooray!
.no_content:
DEBUGF 1, "Content-length not found.\n"
; We didnt find 'content-length', maybe server is using chunked transfer encoding?
; Try to find 'transfer-encoding' header.
stdcall find_header_field, ebp, str_te
test eax, eax
jz .invalid_header
mov ebx, dword[eax]
or ebx, 0x20202020
cmp ebx, 'chun'
jne .invalid_header
mov ebx, dword[eax+4]
or ebx, 0x00202020
and ebx, 0x00ffffff
cmp ebx, 'ked'
jne .invalid_header
or [ebp + http_msg.flags], FLAG_CHUNKED
DEBUGF 1, "Transfer type is: chunked\n"
pop eax
; Set chunk pointer where first chunk should begin.
lea eax, [ebp + http_msg.data]
add eax, [ebp + http_msg.header_length]
mov [ebp + http_msg.chunk_ptr], eax
.chunk_loop:
mov ecx, [ebp + http_msg.write_ptr]
sub ecx, [ebp + http_msg.chunk_ptr]
jb .need_more_data_chunked ; TODO: use this ecx !!!
; Chunkline starts here, convert the ASCII hex number into ebx
mov esi, [ebp + http_msg.chunk_ptr]
xor ebx, ebx
.chunk_hexloop:
lodsb
sub al, '0'
jb .chunk_
cmp al, 9
jbe .chunk_hex
sub al, 'A' - '0' - 10
jb .chunk_
cmp al, 15
jbe .chunk_hex
sub al, 'a' - 'A'
cmp al, 15
ja .chunk_
.chunk_hex:
shl ebx, 4
add bl, al
jmp .chunk_hexloop
.chunk_:
DEBUGF 1, "got chunk of %u bytes\n", ebx
;; cmp esi, [ebp + http_msg.chunk_ptr]
;; je
; If chunk size is 0, all chunks have been received.
test ebx, ebx
jz .got_all_data_chunked ; last chunk, hooray! FIXME: what if it wasnt a valid hex number???
; Chunkline ends with a CR, LF or simply LF
.end_of_chunkline?:
cmp al, 10
je .end_of_chunkline
lodsb
cmp edi, [ebp + http_msg.write_ptr]
jb .end_of_chunkline?
jmp .need_more_data
.end_of_chunkline:
; Update chunk ptr, and remember old one
mov edi, [ebp + http_msg.chunk_ptr]
add [ebp + http_msg.chunk_ptr], ebx
; Realloc buffer, make it 'chunksize' bigger.
mov eax, [ebp + http_msg.buffer_length]
add eax, ebx
invoke mem.realloc, ebp, eax
or eax, eax
jz .no_ram
add [ebp + http_msg.buffer_length], ebx
; Update write ptr
mov eax, esi
sub eax, edi
sub [ebp + http_msg.write_ptr], eax
; Now move all received data to the left (remove chunk header).
; Update content_length accordingly.
mov ecx, [ebp + http_msg.write_ptr]
sub ecx, esi
add [ebp + http_msg.content_received], ecx
rep movsb
jmp .chunk_loop
; Check if we got all the data.
.header_parsed:
add [ebp + http_msg.content_received], eax
mov eax, [ebp + http_msg.content_length]
cmp eax, [ebp + http_msg.content_received]
jae .got_all_data
jmp .need_more_data
.need_more_data_pop:
pop eax
.need_more_data:
popa
xor eax, eax
dec eax
ret
.need_more_data_chunked:
add [ebp + http_msg.content_received], eax
popa
xor eax, eax
dec eax
ret
.got_all_data_chunked:
mov eax, [ebp + http_msg.chunk_ptr]
sub eax, [ebp + http_msg.header_length]
sub eax, http_msg.data
sub eax, ebp
mov [ebp + http_msg.content_length], eax
mov [ebp + http_msg.content_received], eax
.got_all_data:
DEBUGF 1, "We got all the data! (%u bytes)\n", [ebp + http_msg.content_length]
or [ebp + http_msg.flags], FLAG_GOT_DATA
mcall close, [ebp + http_msg.socket]
popa
xor eax, eax
ret
.check_socket:
cmp ebx, EWOULDBLOCK
je .need_more_data
DEBUGF 1, "ERROR: socket error %u\n", ebx
or [ebp + http_msg.flags], FLAG_SOCKET_ERROR
popa
xor eax, eax
ret
.invalid_header:
pop eax
DEBUGF 1, "ERROR: invalid header\n"
or [ebp + http_msg.flags], FLAG_INVALID_HEADER
popa
xor eax, eax
ret
.no_ram_pop:
pop eax
.no_ram:
DEBUGF 1, "ERROR: out of RAM\n"
or [ebp + http_msg.flags], FLAG_NO_RAM
popa
xor eax, eax
ret
endp
;;================================================================================================;;
proc find_header_field identifier, headername ;///////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Find a header field in the received HTTP header ;;
;;------------------------------------------------------------------------------------------------;;
;> identifier = ptr to http_msg struct ;;
;> headername = ptr to ASCIIZ string containg field you want to find (must be in lowercase) ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / ptr to content of the HTTP header field ;;
;;================================================================================================;;
push ebx ecx edx esi edi
DEBUGF 1, "Find header field: %s\n", [headername]
mov ebx, [identifier]
test [ebx + http_msg.flags], FLAG_GOT_HEADER
jz .fail
lea edx, [ebx + http_msg.data]
mov ecx, edx
add ecx, [ebx + http_msg.header_length]
.restart:
mov esi, [headername]
mov edi, edx
.loop:
cmp edi, ecx
jae .fail
lodsb
scasb
je .loop
test al, al
jz .done?
.next:
inc edx
jmp .restart
.not_done:
inc edi
.done?:
cmp byte[edi-1], ':'
je .almost_done
cmp byte[edi-1], ' '
je .not_done
cmp byte[edi-1], 9 ; tab
je .not_done
jmp .next
.almost_done: ; FIXME: buffer overflow?
dec edi
DEBUGF 1, "Found header field\n"
.spaceloop:
inc edi
cmp byte[edi], ' '
je .spaceloop
cmp byte[edi], 9 ; tab
je .spaceloop
mov eax, edi
pop edi esi edx ecx ebx
ret
.fail:
pop edi esi edx ecx ebx
xor eax, eax
ret
endp
;;================================================================================================;;
;;////////////////////////////////////////////////////////////////////////////////////////////////;;
;;================================================================================================;;
;! Internal procedures section ;;
;;================================================================================================;;
;;////////////////////////////////////////////////////////////////////////////////////////////////;;
;;================================================================================================;;
;;================================================================================================;;
proc open_connection hostname, port ;/////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Connects to a HTTP server ;;
;;------------------------------------------------------------------------------------------------;;
;> hostname = ptr to ASCIIZ hostname ;;
;> port = port (x86 byte order) ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / socketnum ;;
;;================================================================================================;;
locals
sockaddr dd ?
socketnum dd ?
endl
; Resolve the hostname
DEBUGF 1, "Resolving hostname\n"
push esp ; reserve stack place
push esp ; fourth parameter
push 0 ; third parameter
push 0 ; second parameter
push [hostname]
call [getaddrinfo]
pop esi
test eax, eax
jnz .error1
; getaddrinfo returns addrinfo struct, make the pointer to sockaddr struct
mov esi, [esi + addrinfo.ai_addr]
mov [sockaddr], esi
mov eax, [esi + sockaddr_in.sin_addr]
test eax, eax
jz .error2
DEBUGF 1, "Server ip=%u.%u.%u.%u\n", \
[esi + sockaddr_in.sin_addr]:1, [esi + sockaddr_in.sin_addr + 1]:1, \
[esi + sockaddr_in.sin_addr + 2]:1, [esi + sockaddr_in.sin_addr + 3]:1
mov [esi + sockaddr_in.sin_family], AF_INET4
mov eax, [port]
xchg al, ah
mov [esi + sockaddr_in.sin_port], ax
; Connect to the server.
mcall socket, AF_INET4, SOCK_STREAM, 0
test eax, eax
jz .error2
mov [socketnum], eax
DEBUGF 1, "Socket: 0x%x\n", eax
mcall connect, [socketnum], [sockaddr], 18
test eax, eax
jnz .error2
DEBUGF 1, "Socket is now connected.\n"
; free allocated memory
push [sockaddr]
call [freeaddrinfo]
mov eax, [socketnum]
ret
.error2:
; free allocated memory
push [sockaddr]
call [freeaddrinfo]
.error1:
xor eax, eax
ret
endp
;;================================================================================================;;
proc parse_url URL ;//////////////////////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Split a given URL into hostname and pageaddr ;;
;;------------------------------------------------------------------------------------------------;;
;> URL = ptr to ASCIIZ URL ;;
;;------------------------------------------------------------------------------------------------;;
;< eax = 0 (error) / ptr to ASCIIZ hostname ;;
;< ebx = ptr to ASCIIZ pageaddr ;;
;;================================================================================================;;
locals
urlsize dd ?
hostname dd ?
pageaddr dd ?
endl
DEBUGF 1, "parsing URL: %s\n", [URL]
; remove any leading protocol text
mov esi, [URL]
mov ecx, URLMAXLEN
mov ax, '//'
.loop1:
cmp byte[esi], 0 ; end of URL?
je .url_ok ; yep, so not found
cmp [esi], ax
je .skip_proto
inc esi
dec ecx
jnz .loop1
DEBUGF 1, "Invalid URL\n"
xor eax, eax
ret
.skip_proto:
inc esi ; skip the two '/'
inc esi
mov [URL], esi ; update pointer so it skips protocol
jmp .loop1 ; we still need to find the length of the URL
.url_ok:
sub esi, [URL] ; calculate total length of URL
mov [urlsize], esi
; now look for page delimiter - it's a '/' character
mov ecx, esi ; URL length
mov edi, [URL]
mov al, '/'
repne scasb
jne @f
dec edi ; return one char, '/' must be part of the pageaddr
inc ecx ;
@@:
push ecx edi ; remember the pointer and length of pageaddr
mov ecx, edi
sub ecx, [URL]
inc ecx ; we will add a 0 byte at the end
invoke mem.alloc, ecx
or eax, eax
jz .no_mem
mov [hostname], eax ; copy hostname to buffer
mov edi, eax
mov esi, [URL]
dec ecx
rep movsb
xor al, al
stosb
mov [pageaddr], str_slash ; assume there is no pageaddr
pop esi ecx
test ecx, ecx
jz .no_page
inc ecx ; we will add a 0 byte at the end
invoke mem.alloc, ecx
or eax, eax
jz .no_mem
mov [pageaddr], eax ; copy pageaddr to buffer
mov edi, eax
dec ecx
rep movsb
xor al, al
stosb
.no_page:
mov eax, [hostname]
mov ebx, [pageaddr]
DEBUGF 1, "hostname: %s\n", eax
DEBUGF 1, "pageaddr: %s\n", ebx
ret
.no_mem:
xor eax, eax
ret
endp
;;================================================================================================;;
proc ascii_dec ;//////////////////////////////////////////////////////////////////////////////////;;
;;------------------------------------------------------------------------------------------------;;
;? Convert eax to ASCII decimal number ;;
;;------------------------------------------------------------------------------------------------;;
;> eax = number ;;
;> edi = ptr where to write ASCII decimal number ;;
;;------------------------------------------------------------------------------------------------;;
;< / ;;
;;================================================================================================;;
push -'0'
mov ecx, 10
.loop:
xor edx, edx
div ecx
add dl, '0'
push edx
test eax, eax
jnz .loop
.loop2:
pop eax
add al, '0'
jz .done
stosb
jmp .loop2
.done:
ret
endp
;;================================================================================================;;
;;////////////////////////////////////////////////////////////////////////////////////////////////;;
;;================================================================================================;;
;! Imported functions section ;;
;;================================================================================================;;
;;////////////////////////////////////////////////////////////////////////////////////////////////;;
;;================================================================================================;;
align 16
@IMPORT:
library \
libini, 'libini.obj', \
network, 'network.obj'
import libini, \
ini.get_str, 'ini_get_str', \
ini.get_int, 'ini_get_int'
import network,\
getaddrinfo, 'getaddrinfo',\
freeaddrinfo, 'freeaddrinfo',\
inet_ntoa, 'inet_ntoa'
;;===========================================================================;;
;;///////////////////////////////////////////////////////////////////////////;;
;;===========================================================================;;
;! Exported functions section ;;
;;===========================================================================;;
;;///////////////////////////////////////////////////////////////////////////;;
;;===========================================================================;;
align 4
@EXPORT:
export \
lib_init , 'lib_init' , \
0x00010001 , 'version' , \
HTTP_get , 'get' , \
HTTP_head , 'head' , \
HTTP_post , 'post' , \
find_header_field , 'find_header_field' , \
HTTP_process , 'process'
; HTTP_put , 'put' , \
; HTTP_delete , 'delete' , \
; HTTP_trace , 'trace' , \
; HTTP_connect , 'connect' , \
section '.data' data readable writable align 16
inifile db '/sys/settings/network.ini', 0
sec_proxy:
key_proxy db 'proxy', 0
key_proxyport db 'port', 0
key_user db 'user', 0
key_password db 'password', 0
str_http11 db ' HTTP/1.1', 13, 10, 'Host: '
.length = $ - str_http11
str_post_cl db 13, 10, 'Content-Length: '
.length = $ - str_post_cl
str_post_ct db 13, 10, 'Content-Type: '
.length = $ - str_post_ct
str_close db 13, 10, 'User-Agent: KolibriOS libHTTP/1.0', 13, 10, 'Connection: Close', 13, 10, 13, 10
.length = $ - str_close
str_proxy_auth db 13, 10, 'Proxy-Authorization: Basic '
.length = $ - str_proxy_auth
base64_table db 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz'
db '0123456789+/'
str_cl db 'content-length', 0
str_slash db '/', 0
str_te db 'transfer-encoding', 0
str_get db 'GET ', 0
str_head db 'HEAD ', 0
str_post db 'POST ', 0
include_debug_strings
; uninitialized data
mem.alloc dd ?
mem.free dd ?
mem.realloc dd ?
dll.load dd ?
proxyAddr rb 256
proxyUser rb 256
proxyPassword rb 256
proxyPort dd ?