Subversion Repositories Kolibri OS

Rev

Rev 8874 | Rev 9692 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  2. ;;                                                              ;;
  3. ;; Copyright (C) KolibriOS team 2004-2021. All rights reserved. ;;
  4. ;;  Distributed under terms of the GNU General Public License.  ;;
  5. ;;                                                              ;;
  6. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  7.  
  8. $Revision: 8876 $
  9.  
  10. align 4 ;3A08
  11. build_interrupt_table:
  12.         mov     edi, idts
  13.         mov     esi, sys_int
  14.         mov     ecx, 0x40
  15.         mov     eax, (10001110b shl 24) + os_code
  16.   @@:
  17.         movsw   ; low word of code-entry
  18.         stosd   ; interrupt gate type : os_code selector
  19.         movsw   ; high word of code-entry
  20.         loop    @b
  21.         movsd   ; copy low  dword of trap gate for int 0x40
  22.         movsd   ; copy high dword of trap gate for int 0x40
  23.         mov     ecx, 23
  24.         mov     eax, (10001110b shl 24) + os_code
  25.   @@:
  26.         movsw   ; low word of code-entry
  27.         stosd   ; interrupt gate type : os_code selector
  28.         movsw   ; high word of code-entry
  29.         loop    @b
  30.         lidt    [esi]
  31.         ret
  32.  
  33. iglobal
  34.   align 4
  35.   sys_int:
  36.     ; exception handlers addresses (for interrupt gate construction)
  37.         dd      e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
  38.         dd      e8,e9,e10,e11,e12,e13,page_fault_exc,e15
  39.         dd      e16, e17,e18, e19
  40.         times   12 dd unknown_interrupt ;int_20..int_31
  41.  
  42.     ; interrupt handlers addresses (for interrupt gate construction)
  43.         ; 0x20+ are IRQ handlers
  44.         dd irq0
  45.         rept 12 irqn:1  \{dd irq_serv.irq_\#irqn\}
  46.         dd irqD
  47.         rept 18 irqn:14 \{dd irq_serv.irq_\#irqn\}
  48.  
  49.         ; int_0x40 gate trap (for directly copied)
  50.         dw i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
  51.  
  52.         rept 23 irqn:33 \{dd irq_serv.irq_\#irqn\}
  53.  
  54.   idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
  55.         dw      2*($-sys_int-4)-1
  56.         dd      idts ; 0x8000B100
  57.         dw      0    ; alignment
  58.  
  59.   msg_fault_sel dd  msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
  60.                 dd  msg_exc_c,msg_exc_d,msg_exc_e,msg_exc_u
  61.                 dd  msg_exc_u,msg_exc_11
  62.  
  63.   msg_exc_8     db "Double fault", 0
  64.   msg_exc_u     db "Undefined Exception", 0
  65.   msg_exc_a     db "Invalid TSS", 0
  66.   msg_exc_b     db "Segment not present", 0
  67.   msg_exc_c     db "Stack fault", 0
  68.   msg_exc_d     db "General protection fault", 0
  69.   msg_exc_e     db "Page fault", 0
  70.   msg_exc_11    db "Alignment Check", 0
  71.  
  72.   if lang eq sp
  73.     include 'core/sys32-sp.inc'
  74.   else
  75.     msg_sel_ker   db "kernel", 0
  76.     msg_sel_app   db "application", 0
  77.   end if
  78.  
  79. endg
  80.  
  81. macro save_ring3_context {
  82.         pushad
  83. }
  84. macro restore_ring3_context {
  85.         popad
  86. }
  87. macro exc_wo_code [num] {
  88.   e#num :
  89.         save_ring3_context
  90.         mov     bl, num
  91.         jmp     exc_c
  92. } exc_wo_code   0,1,2,3,4,5,6,15,16,19
  93.  
  94. macro exc_w_code [num] {
  95.   e#num :
  96.         add     esp, 4
  97.         save_ring3_context
  98.         mov     bl, num
  99.         jmp     exc_c
  100. } exc_w_code    8,9,10,11,12,13,17,18
  101.  
  102.  
  103. uglobal
  104.   pf_err_code   dd ?
  105. endg
  106.  
  107. page_fault_exc:                   ; foolproof: selectors are clobbered ...
  108.         pop     [ss:pf_err_code]  ; actually, until the next #PF
  109.         save_ring3_context
  110.         mov     bl, 14
  111.  
  112. exc_c:                            ; exceptions (all but 7th - #NM)
  113.  ; stack frame when exception/interrupt from ring3 + pushad (i.e right here)
  114.   reg_ss        equ esp+0x30
  115.   reg_esp3      equ esp+0x2C
  116.   reg_eflags    equ esp+0x28
  117.   reg_cs3       equ esp+0x24
  118.   reg_eip       equ esp+0x20
  119.  ; this if frame from pushad
  120.   reg_eax       equ esp+0x1C
  121.   reg_ecx       equ esp+0x18
  122.   reg_edx       equ esp+0x14
  123.   reg_ebx       equ esp+0x10
  124.   reg_esp0      equ esp+0x0C
  125.   reg_ebp       equ esp+0x08
  126.   reg_esi       equ esp+0x04
  127.   reg_edi       equ esp+0x00
  128.  
  129.         mov     ax, app_data       ; exception
  130.         mov     ds, ax             ; load proper values
  131.         mov     es, ax             ; to registers
  132.         cld                        ; clear the direction flag
  133.         movzx   ebx, bl
  134. ; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
  135.         test    byte[reg_eflags+2], 2
  136.         jnz     v86_exc_c
  137.         cmp     bl, 14             ; #PF
  138.         jne     @f
  139.         call    page_fault_handler ; SEE: core/memory.inc
  140.   @@:
  141.         mov     esi, [current_slot]
  142.         btr     [esi+APPDATA.except_mask], ebx
  143.         jnc     @f
  144.         mov     eax, [esi+APPDATA.exc_handler]
  145.         test    eax, eax
  146.         jnz     IRetToUserHook
  147.   @@:
  148.         cli
  149.         mov     eax, [esi+APPDATA.debugger_slot]
  150.         test    eax, eax
  151.         jnz     .debug
  152. ; not debuggee => say error and terminate
  153.         call    show_error_parameters
  154.         sti
  155.         mov     [edx + TASKDATA.state], TSTATE_TERMINATING
  156.         call    wakeup_osloop
  157.         call    change_task
  158. ; If we're here, then the main OS thread has crashed before initializing IDLE thread.
  159. ; Or they both have crashed. Anyway, things are hopelessly broken.
  160.         hlt
  161.         jmp     $-1
  162. .debug:
  163. ; we are debugged process, notify debugger and suspend ourself
  164. ; eax=debugger PID
  165.         mov     ecx, 1          ; debug_message code=other_exception
  166.         cmp     bl, 1           ; #DB
  167.         jne     .notify         ; notify debugger and suspend ourself
  168.         mov     ebx, dr6        ; debug_message data=DR6_image
  169.         xor     edx, edx
  170.         mov     dr6, edx
  171.         mov     edx, dr7
  172.         mov     cl, not 8
  173.   .l1:
  174.         shl     dl, 2
  175.         jc      @f
  176.         and     bl, cl
  177.   @@:
  178.         sar     cl, 1
  179.         jc      .l1
  180.         mov     cl, 3           ; debug_message code=debug_exception
  181. .notify:
  182.         push    ebx             ; debug_message data
  183.         mov     ebx, [TASK_BASE]
  184.         push    [ebx+TASKDATA.pid] ; PID
  185.         push    ecx             ; debug_message code ((here: ecx==1/3))
  186.         mov     cl, 12          ; debug_message size
  187.         call    debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
  188.         add     esp, 12
  189.         mov     edx, [TASK_BASE]
  190.         mov     [edx+TASKDATA.state], TSTATE_RUN_SUSPENDED
  191.         call    change_task     ; SEE: core/shed.inc
  192.         restore_ring3_context
  193.         iretd
  194.  
  195. IRetToUserHook:
  196.         xchg    eax, [reg_eip]
  197.         sub     dword[reg_esp3], 8
  198.         mov     edi, [reg_esp3]
  199.         stosd
  200.         mov     [edi], ebx
  201.         restore_ring3_context
  202. ; simply return control to interrupted process
  203. unknown_interrupt:
  204.         iretd
  205.  
  206. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  207. ; bl - error vector
  208. show_error_parameters:
  209.         cmp     bl, 0x06
  210.         jnz     .no_ud
  211.         push    ebx
  212.         mov     ebx, ud_user_message
  213.         mov     ebp, notifyapp
  214.         call    fs_execute_from_sysdir_param
  215.         pop     ebx
  216. .no_ud:
  217.         mov     edx, [TASK_BASE];not scratched below
  218.         if lang eq sp
  219.         DEBUGF  1, "K : Proceso - terminado forzado PID: %x [%s]\n", [edx+TASKDATA.pid], [current_slot]
  220.         else
  221.         DEBUGF  1, "K : Process - forced terminate PID: %x [%s]\n", [edx+TASKDATA.pid], [current_slot]
  222.         end if
  223.         cmp     bl, 0x08
  224.         jb      .l0
  225.         cmp     bl, 0x11
  226.         jbe     .l1
  227.   .l0:
  228.         mov     bl, 0x09
  229.   .l1:
  230.         mov     eax, [msg_fault_sel+ebx*4 - 0x08*4]
  231.         DEBUGF  1, "K : %s\n", eax
  232.         mov     eax, [reg_cs3+4]
  233.         mov     edi, msg_sel_app
  234.         mov     ebx, [reg_esp3+4]
  235.         cmp     eax, app_code
  236.         je      @f
  237.         mov     edi, msg_sel_ker
  238.         mov     ebx, [reg_esp0+4]
  239.     @@:
  240.         DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
  241.         DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
  242.         DEBUGF  1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
  243.         DEBUGF  1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
  244.  
  245.         DEBUGF  1, "K : Stack dump:\n"
  246.         push    eax ebx ecx edx
  247.         call    .check_ESP
  248.         test    eax, eax
  249.         jnz     .error_ESP
  250.         DEBUGF  1, "K : [ESP+00]: %x",[ebx]
  251.         add     ebx, 4
  252.         call    .check_ESP
  253.         test    eax, eax
  254.         jnz     .error_ESP
  255.         DEBUGF  1, " [ESP+04]: %x",[ebx]
  256.         add     ebx, 4
  257.         call    .check_ESP
  258.         test    eax, eax
  259.         jnz     .error_ESP
  260.         DEBUGF  1, " [ESP+08]: %x\n",[ebx]
  261.         add     ebx, 4
  262.         call    .check_ESP
  263.         test    eax, eax
  264.         jnz     .error_ESP
  265.         DEBUGF  1, "K : [ESP+12]: %x",[ebx]
  266.         add     ebx, 4
  267.         call    .check_ESP
  268.         test    eax, eax
  269.         jnz     .error_ESP
  270.         DEBUGF  1, " [ESP+16]: %x",[ebx]
  271.         add     ebx, 4
  272.         call    .check_ESP
  273.         test    eax, eax
  274.         jnz     .error_ESP
  275.         DEBUGF  1, " [ESP+20]: %x\n",[ebx]
  276.         add     ebx, 4
  277.         call    .check_ESP
  278.         test    eax, eax
  279.         jnz     .error_ESP
  280.         DEBUGF  1, "K : [ESP+24]: %x",[ebx]
  281.         add     ebx, 4
  282.         call    .check_ESP
  283.         test    eax, eax
  284.         jnz     .error_ESP
  285.         DEBUGF  1, " [ESP+28]: %x",[ebx]
  286.         add     ebx, 4
  287.         call    .check_ESP
  288.         test    eax, eax
  289.         jnz     .error_ESP
  290.         DEBUGF  1, " [ESP+32]: %x\n",[ebx]
  291.         pop     edx ecx ebx eax
  292.         ret
  293. .error_ESP:
  294.         pop     edx ecx ebx eax
  295.         DEBUGF  1, "\n"
  296.         DEBUGF  1, "K : Unexpected end of the stack\n"
  297.         ret
  298. ;--------------------------------------
  299. .check_ESP:
  300.         push    ebx
  301.         shr     ebx, 12
  302.         mov     ecx, ebx
  303.         shr     ecx, 10
  304.         mov     edx, [master_tab+ecx*4]
  305.         test    edx, PG_READ
  306.         jz      .fail             ; page table is not created
  307.                                   ; incorrect address in the program
  308.  
  309.         mov     eax, [page_tabs+ebx*4]
  310.         test    eax, 2
  311.         jz      .fail             ; address not reserved for use. error
  312.  
  313.         pop     ebx
  314.         xor     eax, eax
  315.         ret
  316.  
  317. .fail:
  318.         pop     ebx
  319.         xor     eax, eax
  320.         dec     eax
  321.         ret
  322. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  323.  
  324.   restore  reg_ss
  325.   restore  reg_esp3
  326.   restore  reg_eflags
  327.   restore  reg_cs
  328.   restore  reg_eip
  329.   restore  reg_eax
  330.   restore  reg_ecx
  331.   restore  reg_edx
  332.   restore  reg_ebx
  333.   restore  reg_esp0
  334.   restore  reg_ebp
  335.   restore  reg_esi
  336.   restore  reg_edi
  337.  
  338.  
  339. align 4
  340. lock_application_table:
  341.         push    eax ecx edx
  342.         mov     ecx, application_table_mutex
  343.         call    mutex_lock
  344.  
  345.         mov     eax, [current_slot_idx]
  346.         shl     eax, BSF sizeof.TASKDATA
  347.         add     eax, TASK_TABLE+TASKDATA.pid
  348.         mov     eax, [eax]
  349.  
  350.         mov     [application_table_owner], eax
  351.  
  352.         pop     edx ecx eax
  353.  
  354.         ret
  355.  
  356. align 4
  357. unlock_application_table:
  358.         push    eax ecx edx
  359.  
  360.         mov     [application_table_owner], 0
  361.         mov     ecx, application_table_mutex
  362.         call    mutex_unlock
  363.  
  364.         pop     edx ecx eax
  365.  
  366.         ret
  367.  
  368. ; sysfn 64 implementation
  369. align 4
  370. sys_resize_app_memory:
  371. ; in:   eax = 64 - function number
  372. ;       ebx = 1 - number of its only subfunction
  373. ;       ecx = new amount of memory
  374. ; out:
  375. ;       eax = 0 - success
  376. ;       eax = 1 - out of memory
  377.  
  378. ;        cmp    eax,1
  379.         dec     ebx
  380.         jnz     .no_application_mem_resize
  381.  
  382.         mov     eax, [pg_data.pages_free]
  383.         shl     eax, 12
  384.         cmp     eax, ecx
  385.         jae     @f
  386.  
  387.         xor     eax, eax
  388.         inc     eax
  389.         jmp     .store_result
  390. @@:
  391.         stdcall new_mem_resize, ecx
  392. .store_result:
  393.         mov     [esp+32], eax
  394. .no_application_mem_resize:
  395.         ret
  396.  
  397. iglobal
  398. ;  process_terminating  db 'K : Process - terminating',13,10,0
  399. ;  process_terminated   db 'K : Process - done',13,10,0
  400.   msg_obj_destroy       db 'K : destroy app object',13,10,0
  401. endg
  402.  
  403. ; param
  404. ;  esi= slot
  405.  
  406. align 4
  407. terminate: ; terminate application
  408. destroy_thread:
  409.  
  410.         .slot     equ esp+4             ;locals
  411.         .process  equ esp               ;ptr to parent process
  412.  
  413.  
  414.         push    esi        ;save .slot
  415.  
  416.         shl     esi, 8
  417.         mov     edx, [SLOT_BASE+esi+APPDATA.process]
  418.         test    edx, edx
  419.         jnz     @F
  420.         pop     esi
  421.         shl     esi, BSF sizeof.TASKDATA
  422.         mov     [TASK_TABLE+esi+TASKDATA.state], TSTATE_FREE
  423.         ret
  424. @@:
  425.         push    edx                     ;save .process
  426.         lea     edx, [SLOT_BASE+esi]
  427.         call    scheduler_remove_thread
  428.         call    lock_application_table
  429.  
  430. ; if the process is in V86 mode...
  431.         mov     eax, [.slot]
  432.         shl     eax, 8
  433.         mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
  434.         add     esi, RING0_STACK_SIZE
  435.         cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
  436.         jz      .nov86
  437. ; ...it has page directory for V86 mode
  438.         mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
  439.         mov     ecx, [esi+4]
  440.         mov     [eax+SLOT_BASE+APPDATA.process], ecx
  441. ; ...and I/O permission map for V86 mode
  442.         mov     ecx, [esi+12]
  443.         mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
  444.         mov     ecx, [esi+8]
  445.         mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
  446. .nov86:
  447. ; destroy per-thread kernel objects
  448.         mov     esi, [.slot]
  449.         shl     esi, 8
  450.         add     esi, SLOT_BASE+APP_OBJ_OFFSET
  451. @@:
  452.         mov     eax, [esi+APPOBJ.fd]
  453.         test    eax, eax
  454.         jz      @F
  455.  
  456.         cmp     eax, esi
  457.         je      @F
  458.  
  459.         push    esi
  460.         call    [eax+APPOBJ.destroy]
  461.            DEBUGF 1,"%s",msg_obj_destroy
  462.         pop     esi
  463.         jmp     @B
  464. @@:
  465.         mov     esi, [.slot]
  466.         cmp     [fpu_owner], esi ; if user fpu last -> fpu user = 2
  467.         jne     @F
  468.  
  469.         mov     [fpu_owner], 2
  470.         mov     eax, [sizeof.APPDATA*2+SLOT_BASE+APPDATA.fpu_state]
  471.         clts
  472.         bt      [cpu_caps], CAPS_SSE
  473.         jnc     .no_SSE
  474.         fxrstor [eax]
  475.         jmp     @F
  476. .no_SSE:
  477.         fnclex
  478.         frstor  [eax]
  479. @@:
  480.  
  481.         mov     [KEY_COUNT], byte 0    ; empty keyboard buffer
  482.         mov     [BTN_COUNT], byte 0    ; empty button buffer
  483.  
  484.  
  485. ; remove defined hotkeys
  486.         mov     eax, hotkey_list
  487. .loop:
  488.         cmp     [eax+8], esi
  489.         jnz     .cont
  490.         mov     ecx, [eax]
  491.         jecxz   @f
  492.         push    dword [eax+12]
  493.         pop     dword [ecx+12]
  494. @@:
  495.         mov     ecx, [eax+12]
  496.         push    dword [eax]
  497.         pop     dword [ecx]
  498.         xor     ecx, ecx
  499.         mov     [eax], ecx
  500.         mov     [eax+4], ecx
  501.         mov     [eax+8], ecx
  502.         mov     [eax+12], ecx
  503. .cont:
  504.         add     eax, 16
  505.         cmp     eax, hotkey_list+256*16
  506.         jb      .loop
  507. ; get process PID
  508.         mov     eax, esi
  509.         shl     eax, BSF sizeof.TASKDATA
  510.         mov     eax, [eax+TASK_TABLE+TASKDATA.pid]
  511. ; compare current lock input with process PID
  512.         cmp     eax, [PID_lock_input]
  513.         jne     @f
  514.  
  515.         xor     eax, eax
  516.         mov     [PID_lock_input], eax
  517. @@:
  518. ; remove hotkeys in buffer
  519.         mov     eax, hotkey_buffer
  520. .loop2:
  521.         cmp     [eax], esi
  522.         jnz     .cont2
  523.         and     dword [eax+4], 0
  524.         and     dword [eax], 0
  525. .cont2:
  526.         add     eax, 8
  527.         cmp     eax, hotkey_buffer+120*8
  528.         jb      .loop2
  529.  
  530.         mov     ecx, esi          ; remove buttons
  531.   bnewba2:
  532.         mov     edi, [BTN_ADDR]
  533.         mov     eax, edi
  534.         cld
  535.         movzx   ebx, word [edi]
  536.         inc     bx
  537.   bnewba:
  538.         dec     bx
  539.         jz      bnmba
  540.         add     eax, 0x10
  541.         cmp     cx, [eax]
  542.         jnz     bnewba
  543.         pusha
  544.         mov     ecx, ebx
  545.         inc     ecx
  546.         shl     ecx, 4
  547.         mov     ebx, eax
  548.         add     eax, 0x10
  549.         call    memmove
  550.         dec     dword [edi]
  551.         popa
  552.         jmp     bnewba2
  553.   bnmba:
  554.  
  555.         pusha   ; save window coordinates for window restoring
  556.         cld
  557.         shl     esi, BSF sizeof.WDATA
  558.         add     esi, window_data
  559.         mov     eax, [esi+WDATA.box.left]
  560.         mov     [draw_limits.left], eax
  561.         add     eax, [esi+WDATA.box.width]
  562.         mov     [draw_limits.right], eax
  563.         mov     eax, [esi+WDATA.box.top]
  564.         mov     [draw_limits.top], eax
  565.         add     eax, [esi+WDATA.box.height]
  566.         mov     [draw_limits.bottom], eax
  567.  
  568.         xor     eax, eax
  569.         mov     edi, esi
  570.         mov     ecx, sizeof.WDATA/4
  571.         rep stosd
  572.  
  573.         lea     edi, [esi-window_data+draw_data]
  574.         mov     ecx, sizeof.WDATA/4
  575.         rep stosd
  576.         popa
  577.  
  578. ; debuggee test
  579.         pushad
  580.         mov     edi, esi
  581.         shl     edi, BSF sizeof.TASKDATA
  582.         mov     eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
  583.         test    eax, eax
  584.         jz      .nodebug
  585.         movi    ecx, 8
  586.         push    dword [TASK_TABLE+edi+TASKDATA.pid]; PID
  587.         push    2
  588.         call    debugger_notify
  589.         pop     ecx
  590.         pop     ecx
  591. .nodebug:
  592.         popad
  593.  
  594.         mov     ebx, [.slot]
  595.         shl     ebx, 8
  596.         push    ebx
  597.         mov     ebx, [SLOT_BASE+ebx+APPDATA.pl0_stack]
  598.  
  599.         stdcall kernel_free, ebx
  600.  
  601.         pop     ebx
  602.         mov     ebx, [SLOT_BASE+ebx+APPDATA.cur_dir]
  603.         stdcall kernel_free, ebx
  604.  
  605.         mov     edi, [.slot]
  606.         shl     edi, 8
  607.         add     edi, SLOT_BASE
  608.  
  609.         mov     eax, [edi+APPDATA.io_map]
  610.         cmp     eax, [SLOT_BASE+sizeof.APPDATA+APPDATA.io_map]
  611.         je      @F
  612.         call    free_page
  613. @@:
  614.         mov     eax, [edi+APPDATA.io_map+4]
  615.         cmp     eax, [SLOT_BASE+sizeof.APPDATA+APPDATA.io_map+4]
  616.         je      @F
  617.         call    free_page
  618. @@:
  619.         lea     ebx, [edi+APPDATA.list]
  620.         list_del ebx                    ;destroys edx, ecx
  621.  
  622.         mov     eax, 0x20202020
  623.         stosd
  624.         stosd
  625.         stosd
  626.         mov     ecx, 244/4
  627.         xor     eax, eax
  628.         rep stosd
  629.  
  630.   ; activate window
  631.         movzx   eax, word [WIN_STACK + esi*2]
  632.         cmp     eax, [thread_count]
  633.         jne     .dont_activate
  634.         pushad
  635.  .check_next_window:
  636.         dec     eax
  637.         cmp     eax, 1
  638.         jbe     .nothing_to_activate
  639.         lea     esi, [WIN_POS+eax*2]
  640.         movzx   edi, word [esi]              ; edi = process
  641.         shl     edi, BSF sizeof.TASKDATA
  642.         cmp     [TASK_TABLE + edi + TASKDATA.state], TSTATE_FREE ; skip free slots
  643.         je      .check_next_window
  644.         add     edi, window_data
  645. ; \begin{diamond}[19.09.2006]
  646. ; skip minimized windows
  647.         test    [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
  648.         jnz     .check_next_window
  649. ; \end{diamond}
  650.         call    waredraw
  651.  .nothing_to_activate:
  652.         popad
  653.  .dont_activate:
  654.  
  655.         push    esi     ; remove hd1 & cd & flp reservation
  656.         shl     esi, BSF sizeof.TASKDATA
  657.         mov     esi, [esi+TASK_TABLE+TASKDATA.pid]
  658.         cmp     [cd_status], esi
  659.         jnz     @f
  660.         call    free_cd_channel
  661.         and     [cd_status], 0
  662. @@:
  663.         pop     esi
  664.         cmp     [bgrlockpid], esi
  665.         jnz     @f
  666.         and     [bgrlockpid], 0
  667.         and     [bgrlock], 0
  668. @@:
  669.  
  670.         pusha                 ; remove all port reservations
  671.         mov     edx, esi
  672.         shl     edx, BSF sizeof.TASKDATA
  673.         add     edx, TASK_TABLE
  674.         mov     edx, [edx+TASKDATA.pid]
  675.  
  676.   rmpr0:
  677.  
  678.         mov     esi, [RESERVED_PORTS]
  679.  
  680.         test    esi, esi
  681.         jz      rmpr9
  682.  
  683.   rmpr3:
  684.  
  685.         mov     edi, esi
  686.         shl     edi, 4
  687.         add     edi, RESERVED_PORTS
  688.  
  689.         cmp     edx, [edi]
  690.         je      rmpr4
  691.  
  692.         dec     esi
  693.         jnz     rmpr3
  694.  
  695.         jmp     rmpr9
  696.  
  697.   rmpr4:
  698.  
  699.         mov     ecx, 256
  700.         sub     ecx, esi
  701.         shl     ecx, 4
  702.  
  703.         mov     esi, edi
  704.         add     esi, 16
  705.         cld
  706.         rep movsb
  707.  
  708.         dec     dword [RESERVED_PORTS]
  709.  
  710.         jmp     rmpr0
  711.  
  712.   rmpr9:
  713.  
  714.         popa
  715.         mov     edi, esi ; do not run this process slot
  716.         shl     edi, BSF sizeof.TASKDATA
  717.         mov     [edi+TASK_TABLE + TASKDATA.state], TSTATE_FREE
  718. ; debugger test - terminate all debuggees
  719.         mov     eax, 2
  720.         mov     ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
  721. .xd0:
  722.         cmp     eax, [thread_count]
  723.         ja      .xd1
  724.         cmp     dword [ecx], esi
  725.         jnz     @f
  726.         and     dword [ecx], 0
  727.         pushad
  728.         xchg    eax, ecx
  729.         mov     ebx, 2
  730.         call    sys_system
  731.         popad
  732. @@:
  733.         inc     eax
  734.         add     ecx, 0x100
  735.         jmp     .xd0
  736. .xd1:
  737. ;release slot
  738.  
  739.         bts     [thr_slot_map], esi
  740.  
  741.         mov     ecx, [.process]
  742.         lea     eax, [ecx+PROC.thr_list]
  743.         cmp     eax, [eax+LHEAD.next]
  744.         jne     @F
  745.  
  746.         call    destroy_process.internal
  747. @@:
  748.         sti     ; .. and life goes on
  749.  
  750.         mov     eax, [draw_limits.left]
  751.         mov     ebx, [draw_limits.top]
  752.         mov     ecx, [draw_limits.right]
  753.         mov     edx, [draw_limits.bottom]
  754.         call    calculatescreen
  755.         xor     eax, eax
  756.         xor     esi, esi
  757.         call    redrawscreen
  758.  
  759.         call    unlock_application_table
  760.     ;mov   esi,process_terminated
  761.     ;call  sys_msg_board_str
  762.         add     esp, 8
  763.         ret
  764. restore .slot
  765. restore .process
  766.  
  767. ; Three following procedures are used to guarantee that
  768. ; some part of kernel code will not be terminated from outside
  769. ; while it is running.
  770. ; Note: they do not protect a thread from terminating due to errors inside
  771. ; the thread; accessing a nonexisting memory would still terminate it.
  772.  
  773. ; First two procedures must be used in pair by thread-to-be-protected
  774. ; to signal the beginning and the end of an important part.
  775. ; It is OK to have nested areas.
  776.  
  777. ; The last procedure must be used by outside wanna-be-terminators;
  778. ; if it is safe to terminate the given thread immediately, it returns eax=1;
  779. ; otherwise, it returns eax=0 and notifies the target thread that it should
  780. ; terminate itself when leaving a critical area (the last critical area if
  781. ; they are nested).
  782.  
  783. ; Implementation. Those procedures use one dword in APPDATA for the thread,
  784. ; APPDATA.terminate_protection.
  785. ; * The upper bit is 1 during normal operations and 0 when terminate is requested.
  786. ; * Other bits form a number = depth of critical regions,
  787. ;   plus 1 if the upper bit is 1.
  788. ; * When this dword goes to zero, the thread should be destructed,
  789. ;   and the procedure in which it happened becomes responsible for destruction.
  790.  
  791. ; Enter critical area. Called by thread which wants to be protected.
  792. proc protect_from_terminate
  793.         mov     edx, [current_slot]
  794. ; Atomically increment depth of critical areas and get the old value.
  795.         mov     eax, 1
  796.         lock xadd [edx+APPDATA.terminate_protection], eax
  797. ; If the old value was zero, somebody has started to terminate us,
  798. ; so we are destructing and cannot do anything protected.
  799. ; Otherwise, return to the caller.
  800.         test    eax, eax
  801.         jz      @f
  802.         ret
  803. @@:
  804. ; Wait for somebody to finish us.
  805.         call    change_task
  806.         jmp     @b
  807. endp
  808.  
  809. ; Leave critical area. Called by thread which wants to be protected.
  810. proc unprotect_from_terminate
  811.         mov     edx, [current_slot]
  812. ; Atomically decrement depth of critical areas.
  813.         lock dec [edx+APPDATA.terminate_protection]
  814. ; If the result of decrement is zero, somebody has requested termination,
  815. ; but at that moment we were inside a critical area; terminate now.
  816.         jz      sys_end
  817. ; Otherwise, return to the caller.
  818.         ret
  819. endp
  820.  
  821. ; Request termination of thread identified by edx = SLOT_BASE + slot*sizeof.APPDATA.
  822. ; Called by anyone.
  823. proc request_terminate
  824.         xor     eax, eax        ; set return value
  825. ; Atomically clear the upper bit. If it was already zero, then
  826. ; somebody has requested termination before us, so just exit.
  827.         lock btr [edx+APPDATA.terminate_protection], 31
  828.         jnc     .unsafe
  829. ; Atomically decrement depth of critical areas.
  830.         lock dec [edx+APPDATA.terminate_protection]
  831. ; If the result of decrement is nonzero, the target thread is inside a
  832. ; critical area; leave termination to leaving that area.
  833.         jnz     .unsafe
  834. ; Otherwise, it is safe to kill the target now and the caller is responsible
  835. ; for this. Return eax=1.
  836.         inc     eax
  837. .unsafe:
  838.         ret
  839. endp
  840.  
  841.