Subversion Repositories Kolibri OS

Rev

Rev 2112 | Rev 2231 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  2. ;;                                                              ;;
  3. ;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
  4. ;; Distributed under terms of the GNU General Public License    ;;
  5. ;;                                                              ;;
  6. ;;                                                              ;;
  7. ;;  MenuetOS process management, protected ring3                ;;
  8. ;;                                                              ;;
  9. ;;  Distributed under GPL. See file COPYING for details.        ;;
  10. ;;  Copyright 2003 Ville Turjanmaa                              ;;
  11. ;;                                                              ;;
  12. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  13.  
  14. $Revision: 2118 $
  15.  
  16.  
  17. align 4 ;3A08
  18. build_interrupt_table:
  19.         mov     edi, idts
  20.         mov     esi, sys_int
  21.         mov     ecx, 0x40
  22.         mov     eax, (10001110b shl 24) + os_code
  23.   @@:   movsw   ;low word of code-entry
  24.         stosd   ;interrupt gate type : os_code selector
  25.         movsw   ;high word of code-entry
  26.         loop    @b
  27.         movsd   ;copy low  dword of trap gate for int 0x40
  28.         movsd   ;copy high dword of trap gate for int 0x40
  29.         lidt    [esi]
  30.         ret
  31.  
  32. iglobal
  33.   align 4
  34.   sys_int:
  35.     ;exception handlers addresses (for interrupt gate construction)
  36.         dd      e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
  37.         dd      e8,e9,e10,e11,e12,e13,page_fault_exc,e15
  38.         dd      e16, e17,e18, e19
  39.         times   12 dd unknown_interrupt ;int_20..int_31
  40.  
  41.     ;interrupt handlers addresses (for interrupt gate construction)
  42.         ; 0x20 .. 0x2F - IRQ handlers
  43.         dd      irq0, irq_serv.irq_1, irq_serv.irq_2
  44.         dd      irq_serv.irq_3, irq_serv.irq_4
  45.         dd      irq_serv.irq_5,  irq_serv.irq_6,  irq_serv.irq_7
  46.         dd      irq_serv.irq_8,  irq_serv.irq_9,  irq_serv.irq_10
  47.         dd      irq_serv.irq_11, irq_serv.irq_12, irqD, irq_serv.irq_14, irq_serv.irq_15
  48.  
  49.  
  50.     times 32 - IRQ_RESERVED dd unknown_interrupt
  51.     ;int_0x40 gate trap (for directly copied)
  52.         dw      i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
  53.  
  54.   idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
  55.         dw      2*($-sys_int-4)-1
  56.         dd      idts ;0x8000B100
  57.         dw      0    ;ïðîñòî âûðàâíèâàíèå
  58.  
  59.   msg_fault_sel dd  msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
  60.                 dd  msg_exc_c,msg_exc_d,msg_exc_e
  61.  
  62.   msg_exc_8     db "Double fault", 0
  63.   msg_exc_u     db "Undefined Exception", 0
  64.   msg_exc_a     db "Invalid TSS", 0
  65.   msg_exc_b     db "Segment not present", 0
  66.   msg_exc_c     db "Stack fault", 0
  67.   msg_exc_d     db "General protection fault", 0
  68.   msg_exc_e     db "Page fault", 0
  69.  
  70.   msg_sel_ker   db "kernel", 0
  71.   msg_sel_app   db "application", 0
  72.  
  73. endg
  74.  
  75. macro save_ring3_context {
  76.         pushad
  77. }
  78. macro restore_ring3_context {
  79.         popad
  80. }
  81. macro exc_wo_code [num] {
  82.   e#num :
  83.         save_ring3_context
  84.         mov     bl, num
  85.         jmp     exc_c
  86. } exc_wo_code   0,1,2,3,4,5,6,15,16,19
  87.  
  88. macro exc_w_code [num] {
  89.   e#num :
  90.         add     esp, 4
  91.         save_ring3_context
  92.         mov     bl, num
  93.         jmp     exc_c
  94. } exc_w_code    8,9,10,11,12,13,17,18
  95.  
  96.  
  97. uglobal
  98.   pf_err_code   dd ?
  99. endg
  100.  
  101. page_fault_exc:                 ; äóðàêîóñòî÷èâîñòü: ñåëåêòîðû èñïîð÷åíû...
  102.         pop     [ss:pf_err_code]; äåéñòâèòåëüíî äî ñëåäóþùåãî #PF
  103.         save_ring3_context
  104.         mov     bl,14
  105.  
  106. exc_c:                          ; èñêëþ÷åíèÿ (âñå, êðîìå 7-ãî - #NM)
  107. ; Ôðýéì ñòåêà ïðè èñêëþ÷åíèè/ïðåðûâàíèè èç 3-ãî êîëüöà + pushad (ò.å., èìåííî çäåñü)
  108.   reg_ss        equ esp+0x30
  109.   reg_esp3      equ esp+0x2C
  110.   reg_eflags    equ esp+0x28
  111.   reg_cs3       equ esp+0x24
  112.   reg_eip       equ esp+0x20
  113.  ; ýòî ôðýéì îò pushad
  114.   reg_eax       equ esp+0x1C
  115.   reg_ecx       equ esp+0x18
  116.   reg_edx       equ esp+0x14
  117.   reg_ebx       equ esp+0x10
  118.   reg_esp0      equ esp+0x0C
  119.   reg_ebp       equ esp+0x08
  120.   reg_esi       equ esp+0x04
  121.   reg_edi       equ esp+0x00
  122.  
  123.         Mov     ds,ax,app_data  ; çàãðóçèì ïðàâèëüíûå çíà÷åíè
  124.         mov     es,ax           ; â ñåãìåíòíûå ðåãèñòðû
  125.         cld                     ; è ïðèâîäèì DF ê ñòàíäàðòó
  126.         movzx   ebx,bl
  127. ; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
  128.         test    byte[reg_eflags+2],2
  129.         jnz     v86_exc_c
  130.         cmp     bl,14           ; #PF
  131.         jne     @f
  132.         call    page_fault_handler ; SEE: core/memory.inc
  133.   @@:   mov     esi, [current_slot]
  134.         btr     [esi+APPDATA.except_mask], ebx
  135.         jnc     @f
  136.         mov     eax,[esi+APPDATA.exc_handler]
  137.         test    eax, eax
  138.         jnz     IRetToUserHook
  139.   @@:   cli
  140.         mov     eax, [esi+APPDATA.debugger_slot]
  141.         test    eax, eax
  142.         jnz     .debug
  143.         sti
  144. ; not debuggee => say error and terminate
  145.         call    show_error_parameters ;; only ONE using, inline ???
  146.        ;mov     edx, [TASK_BASE]
  147.         mov     [edx + TASKDATA.state], byte 4 ; terminate
  148.         jmp     change_task     ; stack - here it does not matter at all, SEE: core/shed.inc
  149. .debug:
  150. ; we are debugged process, notify debugger and suspend ourself
  151. ; eax=debugger PID
  152.         mov     ecx,1           ; debug_message code=other_exception
  153.         cmp     bl,1            ; #DB
  154.         jne     .notify         ; notify debugger and suspend ourself
  155.         mov     ebx, dr6        ; debug_message data=DR6_image
  156.         xor     edx, edx
  157.         mov     dr6, edx
  158.         mov     edx, dr7
  159.         mov     cl, not 8
  160.   .l1:  shl     dl,2
  161.         jc      @f
  162.         and     bl, cl
  163.   @@:   sar     cl,1
  164.         jc      .l1
  165.         mov     cl, 3           ; debug_message code=debug_exception
  166. .notify:
  167.         push    ebx             ; debug_message data
  168.         mov     ebx, [TASK_BASE]
  169.         push    [ebx+TASKDATA.pid] ; PID
  170.         push    ecx             ; debug_message code ((here: ecx==1/3))
  171.         mov     cl, 12          ; debug_message size
  172.         call    debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
  173.         add     esp,12
  174.         mov     edx, [TASK_BASE]
  175.         mov     byte [edx+TASKDATA.state], 1 ; suspended
  176.         call    change_task     ; SEE: core/shed.inc
  177.         restore_ring3_context
  178.         iretd
  179.  
  180. IRetToUserHook:
  181.         xchg    eax, [reg_eip]
  182.         sub     dword[reg_esp3], 8
  183.         mov     edi, [reg_esp3]
  184.         stosd
  185.         mov     [edi], ebx
  186.         restore_ring3_context
  187. ; simply return control to interrupted process
  188. unknown_interrupt:
  189.         iretd
  190.  
  191. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  192. ; bl - error vector
  193. show_error_parameters:
  194.         cmp     bl, 0x06
  195.         jnz     .no_ud
  196.         push    ebx
  197.         mov     ebx, ud_user_message
  198.         mov     ebp, notifyapp
  199.         call    fs_execute_from_sysdir_param
  200.         pop     ebx
  201. .no_ud:
  202.         mov     edx,[TASK_BASE] ;not scratched below
  203.         DEBUGF  1, "K : Process - forced terminate PID: %x\n", [edx+TASKDATA.pid]
  204.         cmp     bl, 0x08
  205.         jb      .l0
  206.         cmp     bl, 0x0e
  207.         jbe     .l1
  208.   .l0:  mov     bl, 0x09
  209.   .l1:  mov     eax,[msg_fault_sel+ebx*4 - 0x08*4]
  210.         DEBUGF  1, "K : %s\n", eax
  211.         mov     eax, [reg_cs3+4]
  212.         mov     edi, msg_sel_app
  213.         mov     ebx, [reg_esp3+4]
  214.         cmp     eax, app_code
  215.         je      @f
  216.         mov     edi, msg_sel_ker
  217.         mov     ebx, [reg_esp0+4]
  218.     @@: DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
  219.         DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
  220.         DEBUGF  1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
  221.         DEBUGF  1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
  222.         ret
  223. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  224.  
  225.   restore  reg_ss
  226.   restore  reg_esp3
  227.   restore  reg_eflags
  228.   restore  reg_cs
  229.   restore  reg_eip
  230.   restore  reg_eax
  231.   restore  reg_ecx
  232.   restore  reg_edx
  233.   restore  reg_ebx
  234.   restore  reg_esp0
  235.   restore  reg_ebp
  236.   restore  reg_esi
  237.   restore  reg_edi
  238.  
  239.  
  240. align 4
  241. set_application_table_status:
  242.         push eax
  243.  
  244.         mov  eax,[CURRENT_TASK]
  245.         shl  eax, 5
  246.         add  eax,CURRENT_TASK+TASKDATA.pid
  247.         mov  eax,[eax]
  248.  
  249.         mov  [application_table_status],eax
  250.  
  251.         pop  eax
  252.  
  253.         ret
  254.  
  255. align 4
  256. clear_application_table_status:
  257.         push eax
  258.  
  259.         mov  eax,[CURRENT_TASK]
  260.         shl  eax, 5
  261.         add  eax,CURRENT_TASK+TASKDATA.pid
  262.         mov  eax,[eax]
  263.  
  264.         cmp  eax,[application_table_status]
  265.         jne  apptsl1
  266.         xor  eax,eax
  267.         mov  [application_table_status],eax
  268.       apptsl1:
  269.  
  270.         pop  eax
  271.  
  272.         ret
  273.  
  274. ;  * eax = 64 - íîìåð ôóíêöèè
  275. ;  * ebx = 1 - åäèíñòâåííàÿ ïîäôóíêöèÿ
  276. ;  * ecx = íîâûé ðàçìåð ïàìÿòè
  277. ;Âîçâðàùàåìîå çíà÷åíèå:
  278. ;  * eax = 0 - óñïåøíî
  279. ;  * eax = 1 - íåäîñòàòî÷íî ïàìÿòè
  280.  
  281. align 4
  282. sys_resize_app_memory:
  283.         ; ebx = 1 - resize
  284.         ; ecx = new amount of memory
  285.  
  286. ;        cmp    eax,1
  287.         dec     ebx
  288.         jnz    .no_application_mem_resize
  289.         stdcall new_mem_resize, ecx
  290.         mov [esp+32], eax
  291. .no_application_mem_resize:
  292.         ret
  293.  
  294. iglobal
  295. ;  process_terminating  db 'K : Process - terminating',13,10,0
  296. ;  process_terminated   db 'K : Process - done',13,10,0
  297.   msg_obj_destroy       db 'K : destroy app object',13,10,0
  298. endg
  299.  
  300. ; param
  301. ;  esi= slot
  302.  
  303. align 4
  304. terminate: ; terminate application
  305.  
  306.            .slot equ esp   ;locals
  307.  
  308.            push   esi      ;save .slot
  309.  
  310.            shl esi, 8
  311.            cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
  312.            jne @F
  313.            pop    esi
  314.            shl    esi, 5
  315.            mov    [CURRENT_TASK+esi+TASKDATA.state], 9
  316.            ret
  317. @@:
  318.            ;mov    esi,process_terminating
  319.            ;call   sys_msg_board_str
  320. @@:
  321.            cli
  322.            cmp   [application_table_status],0
  323.            je    term9
  324.            sti
  325.            call  change_task
  326.            jmp   @b
  327. term9:
  328.            call  set_application_table_status
  329.  
  330. ; if the process is in V86 mode...
  331.         mov     eax, [.slot]
  332.         shl     eax, 8
  333.         mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
  334.         add     esi, RING0_STACK_SIZE
  335.         cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
  336.         jz      .nov86
  337. ; ...it has page directory for V86 mode
  338.         mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
  339.         mov     ecx, [esi+4]
  340.         mov     [eax+SLOT_BASE+APPDATA.dir_table], ecx
  341. ; ...and I/O permission map for V86 mode
  342.         mov     ecx, [esi+12]
  343.         mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
  344.         mov     ecx, [esi+8]
  345.         mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
  346. .nov86:
  347.  
  348.            mov esi, [.slot]
  349.            shl esi,8
  350.            add esi, SLOT_BASE+APP_OBJ_OFFSET
  351. @@:
  352.            mov eax, [esi+APPOBJ.fd]
  353.            test eax, eax
  354.            jz @F
  355.  
  356.            cmp eax, esi
  357.            je @F
  358.  
  359.            push esi
  360.            call [eax+APPOBJ.destroy]
  361.            DEBUGF 1,"%s",msg_obj_destroy
  362.            pop esi
  363.            jmp @B
  364. @@:
  365.  
  366.            mov eax, [.slot]
  367.            shl eax, 8
  368.            stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]
  369.  
  370.            mov esi, [.slot]
  371.            cmp [fpu_owner],esi   ; if user fpu last -> fpu user = 1
  372.            jne @F
  373.  
  374.            mov [fpu_owner],1
  375.            mov eax, [256+SLOT_BASE+APPDATA.fpu_state]
  376.            clts
  377.            bt [cpu_caps], CAPS_SSE
  378.            jnc .no_SSE
  379.            fxrstor [eax]
  380.            jmp @F
  381. .no_SSE:
  382.            fnclex
  383.            frstor [eax]
  384. @@:
  385.  
  386.     mov   [KEY_COUNT],byte 0           ; empty keyboard buffer
  387.     mov   [BTN_COUNT],byte 0           ; empty button buffer
  388.  
  389.  
  390. ; remove defined hotkeys
  391.         mov     eax, hotkey_list
  392. .loop:
  393.         cmp     [eax+8], esi
  394.         jnz     .cont
  395.         mov     ecx, [eax]
  396.         jecxz   @f
  397.         push    dword [eax+12]
  398.         pop     dword [ecx+12]
  399. @@:
  400.         mov     ecx, [eax+12]
  401.         push    dword [eax]
  402.         pop     dword [ecx]
  403.         xor     ecx, ecx
  404.         mov     [eax], ecx
  405.         mov     [eax+4], ecx
  406.         mov     [eax+8], ecx
  407.         mov     [eax+12], ecx
  408. .cont:
  409.         add     eax, 16
  410.         cmp     eax, hotkey_list+256*16
  411.         jb      .loop
  412. ; remove hotkeys in buffer
  413.         mov     eax, hotkey_buffer
  414. .loop2:
  415.         cmp     [eax], esi
  416.         jnz     .cont2
  417.         and     dword [eax+4], 0
  418.         and     dword [eax], 0
  419. .cont2:
  420.         add     eax, 8
  421.         cmp     eax, hotkey_buffer+120*8
  422.         jb      .loop2
  423.  
  424.     mov   ecx,esi                 ; remove buttons
  425.   bnewba2:
  426.     mov   edi,[BTN_ADDR]
  427.     mov   eax,edi
  428.     cld
  429.     movzx ebx,word [edi]
  430.     inc   bx
  431.   bnewba:
  432.     dec   bx
  433.     jz    bnmba
  434.     add   eax,0x10
  435.     cmp   cx,[eax]
  436.     jnz   bnewba
  437.     pusha
  438.     mov   ecx,ebx
  439.     inc   ecx
  440.     shl   ecx,4
  441.     mov   ebx,eax
  442.     add   eax,0x10
  443.     call  memmove
  444.     dec   dword [edi]
  445.     popa
  446.     jmp   bnewba2
  447.   bnmba:
  448.  
  449.     pusha     ; save window coordinates for window restoring
  450.     cld
  451.     shl   esi,5
  452.     add   esi,window_data
  453.     mov   eax,[esi+WDATA.box.left]
  454.     mov   [draw_limits.left],eax
  455.     add   eax,[esi+WDATA.box.width]
  456.     mov   [draw_limits.right],eax
  457.     mov   eax,[esi+WDATA.box.top]
  458.     mov   [draw_limits.top],eax
  459.     add   eax,[esi+WDATA.box.height]
  460.     mov   [draw_limits.bottom],eax
  461.  
  462.     xor   eax, eax
  463.     mov   [esi+WDATA.box.left],eax
  464.     mov   [esi+WDATA.box.width],eax
  465.     mov   [esi+WDATA.box.top],eax
  466.     mov   [esi+WDATA.box.height],eax
  467.     mov   [esi+WDATA.cl_workarea],eax
  468.     mov   [esi+WDATA.cl_titlebar],eax
  469.     mov   [esi+WDATA.cl_frames],eax
  470.     mov   dword [esi+WDATA.reserved],eax ; clear all flags: wstate, redraw, wdrawn
  471.     lea   edi, [esi-window_data+draw_data]
  472.     mov   ecx,32/4
  473.     rep   stosd
  474.     popa
  475.  
  476. ; debuggee test
  477.     pushad
  478.     mov  edi, esi
  479.     shl  edi, 5
  480.     mov  eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
  481.     test eax, eax
  482.     jz   .nodebug
  483.     push 8
  484.     pop  ecx
  485.     push dword [CURRENT_TASK+edi+TASKDATA.pid]   ; PID
  486.     push 2
  487.     call debugger_notify
  488.     pop  ecx
  489.     pop  ecx
  490. .nodebug:
  491.     popad
  492.  
  493.            mov ebx, [.slot]
  494.            shl ebx, 8
  495.            push ebx
  496.            mov ebx,[SLOT_BASE+ebx+APPDATA.pl0_stack]
  497.  
  498.            stdcall kernel_free, ebx
  499.  
  500.            pop ebx
  501.            mov ebx,[SLOT_BASE+ebx+APPDATA.cur_dir]
  502.            stdcall kernel_free, ebx
  503.  
  504.            mov edi, [.slot]
  505.            shl edi,8
  506.            add edi,SLOT_BASE
  507.  
  508.            mov eax, [edi+APPDATA.io_map]
  509.            cmp eax, [SLOT_BASE+256+APPDATA.io_map]
  510.            je @F
  511.            call free_page
  512. @@:
  513.            mov eax, [edi+APPDATA.io_map+4]
  514.            cmp eax, [SLOT_BASE+256+APPDATA.io_map+4]
  515.            je @F
  516.            call free_page
  517. @@:
  518.            mov eax, 0x20202020
  519.            stosd
  520.            stosd
  521.            stosd
  522.            mov ecx,244/4
  523.            xor eax, eax
  524.            rep stosd
  525.  
  526.   ; activate window
  527.         movzx  eax, word [WIN_STACK + esi*2]
  528.         cmp    eax, [TASK_COUNT]
  529.         jne    .dont_activate
  530.         pushad
  531.  .check_next_window:
  532.         dec    eax
  533.         cmp    eax, 1
  534.         jbe    .nothing_to_activate
  535.         lea    esi, [WIN_POS+eax*2]
  536.         movzx  edi, word [esi]               ; edi = process
  537.         shl    edi, 5
  538.         cmp    [CURRENT_TASK + edi + TASKDATA.state], byte 9  ; skip dead slots
  539.         je     .check_next_window
  540.         add    edi, window_data
  541. ; \begin{diamond}[19.09.2006]
  542. ; skip minimized windows
  543.         test   [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
  544.         jnz    .check_next_window
  545. ; \end{diamond}
  546.         call   waredraw
  547.  .nothing_to_activate:
  548.         popad
  549.  .dont_activate:
  550.  
  551.         push    esi     ; remove hd1 & cd & flp reservation
  552.         shl     esi, 5
  553.         mov     esi, [esi+CURRENT_TASK+TASKDATA.pid]
  554.         cmp     [hd1_status], esi
  555.         jnz     @f
  556.         call    free_hd_channel
  557.         and     [hd1_status], 0
  558. @@:
  559.         cmp     [cd_status], esi
  560.         jnz     @f
  561.         call    free_cd_channel
  562.         and     [cd_status], 0
  563. @@:
  564.         cmp     [flp_status], esi
  565.         jnz     @f
  566.         and     [flp_status], 0
  567. @@:
  568.         pop     esi
  569.         cmp     [bgrlockpid], esi
  570.         jnz     @f
  571.         and     [bgrlockpid], 0
  572.         and     [bgrlock], 0
  573. @@:
  574.  
  575.     pusha                     ; remove all port reservations
  576.     mov   edx,esi
  577.     shl   edx, 5
  578.     add   edx,CURRENT_TASK
  579.     mov   edx,[edx+TASKDATA.pid]
  580.  
  581.   rmpr0:
  582.  
  583.     mov   esi,[RESERVED_PORTS]
  584.  
  585.     test  esi,esi
  586.     jz    rmpr9
  587.  
  588.   rmpr3:
  589.  
  590.     mov   edi,esi
  591.     shl   edi,4
  592.     add   edi,RESERVED_PORTS
  593.  
  594.     cmp   edx,[edi]
  595.     je    rmpr4
  596.  
  597.     dec   esi
  598.     jnz   rmpr3
  599.  
  600.     jmp   rmpr9
  601.  
  602.   rmpr4:
  603.  
  604.     mov   ecx,256
  605.     sub   ecx,esi
  606.     shl   ecx,4
  607.  
  608.     mov   esi,edi
  609.     add   esi,16
  610.     cld
  611.     rep   movsb
  612.  
  613.     dec   dword [RESERVED_PORTS]
  614.  
  615.     jmp   rmpr0
  616.  
  617.   rmpr9:
  618.  
  619.     popa
  620.     mov  edi,esi         ; do not run this process slot
  621.     shl  edi, 5
  622.     mov  [edi+CURRENT_TASK + TASKDATA.state],byte 9
  623. ; debugger test - terminate all debuggees
  624.     mov  eax, 2
  625.     mov  ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
  626. .xd0:
  627.     cmp  eax, [TASK_COUNT]
  628.     ja   .xd1
  629.     cmp  dword [ecx], esi
  630.     jnz  @f
  631.     and  dword [ecx], 0
  632.     pushad
  633.     xchg eax, ecx
  634.     mov  ebx, 2
  635.     call sys_system
  636.     popad
  637. @@:
  638.     inc  eax
  639.     add  ecx, 0x100
  640.     jmp  .xd0
  641. .xd1:
  642. ;    call  systest
  643.     sti  ; .. and life goes on
  644.  
  645.     mov   eax, [draw_limits.left]
  646.     mov   ebx, [draw_limits.top]
  647.     mov   ecx, [draw_limits.right]
  648.     mov   edx, [draw_limits.bottom]
  649.     call  calculatescreen
  650.     xor   eax, eax
  651.     xor   esi, esi
  652.     call  redrawscreen
  653.  
  654.     mov   [MOUSE_BACKGROUND],byte 0  ; no mouse background
  655.     mov   [DONT_DRAW_MOUSE],byte 0  ; draw mouse
  656.  
  657.     and   [application_table_status],0
  658.     ;mov   esi,process_terminated
  659.     ;call  sys_msg_board_str
  660.     add esp, 4
  661.     ret
  662. restore .slot
  663.  
  664. iglobal
  665. if lang eq ru
  666.   boot_sched_1    db   '‘®§¤ ­¨¥ GDT TSS 㪠§ â¥«ï',0
  667.   boot_sched_2    db   '‘®§¤ ­¨¥ IDT â ¡«¨æë',0
  668. else
  669.   boot_sched_1    db   'Building gdt tss pointer',0
  670.   boot_sched_2    db   'Building IDT table',0
  671. end if
  672. endg
  673.  
  674.  
  675. build_scheduler:
  676.  
  677.         mov    esi,boot_sched_1
  678.         call   boot_log
  679.   ;      call   build_process_gdt_tss_pointer
  680.  
  681.   ;      mov    esi,boot_sched_2
  682.   ;      call   boot_log
  683.  
  684.         ret
  685.