Subversion Repositories Kolibri OS

Rev

Rev 5271 | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright 2013 Advanced Micro Devices, Inc.
  3.  *
  4.  * Permission is hereby granted, free of charge, to any person obtaining a
  5.  * copy of this software and associated documentation files (the "Software"),
  6.  * to deal in the Software without restriction, including without limitation
  7.  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  8.  * and/or sell copies of the Software, and to permit persons to whom the
  9.  * Software is furnished to do so, subject to the following conditions:
  10.  *
  11.  * The above copyright notice and this permission notice shall be included in
  12.  * all copies or substantial portions of the Software.
  13.  *
  14.  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  15.  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  16.  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  17.  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
  18.  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  19.  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  20.  * OTHER DEALINGS IN THE SOFTWARE.
  21.  *
  22.  * Authors: Christian König <christian.koenig@amd.com>
  23.  */
  24.  
  25. #include <linux/firmware.h>
  26. #include <drm/drmP.h>
  27. #include "radeon.h"
  28. #include "radeon_asic.h"
  29. #include "r600d.h"
  30.  
  31. /**
  32.  * uvd_v1_0_get_rptr - get read pointer
  33.  *
  34.  * @rdev: radeon_device pointer
  35.  * @ring: radeon_ring pointer
  36.  *
  37.  * Returns the current hardware read pointer
  38.  */
  39. uint32_t uvd_v1_0_get_rptr(struct radeon_device *rdev,
  40.                            struct radeon_ring *ring)
  41. {
  42.         return RREG32(UVD_RBC_RB_RPTR);
  43. }
  44.  
  45. /**
  46.  * uvd_v1_0_get_wptr - get write pointer
  47.  *
  48.  * @rdev: radeon_device pointer
  49.  * @ring: radeon_ring pointer
  50.  *
  51.  * Returns the current hardware write pointer
  52.  */
  53. uint32_t uvd_v1_0_get_wptr(struct radeon_device *rdev,
  54.                            struct radeon_ring *ring)
  55. {
  56.         return RREG32(UVD_RBC_RB_WPTR);
  57. }
  58.  
  59. /**
  60.  * uvd_v1_0_set_wptr - set write pointer
  61.  *
  62.  * @rdev: radeon_device pointer
  63.  * @ring: radeon_ring pointer
  64.  *
  65.  * Commits the write pointer to the hardware
  66.  */
  67. void uvd_v1_0_set_wptr(struct radeon_device *rdev,
  68.                        struct radeon_ring *ring)
  69. {
  70.         WREG32(UVD_RBC_RB_WPTR, ring->wptr);
  71. }
  72.  
  73. /**
  74.  * uvd_v1_0_fence_emit - emit an fence & trap command
  75.  *
  76.  * @rdev: radeon_device pointer
  77.  * @fence: fence to emit
  78.  *
  79.  * Write a fence and a trap command to the ring.
  80.  */
  81. void uvd_v1_0_fence_emit(struct radeon_device *rdev,
  82.                          struct radeon_fence *fence)
  83. {
  84.         struct radeon_ring *ring = &rdev->ring[fence->ring];
  85.         uint64_t addr = rdev->fence_drv[fence->ring].gpu_addr;
  86.  
  87.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_DATA0, 0));
  88.         radeon_ring_write(ring, addr & 0xffffffff);
  89.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_DATA1, 0));
  90.         radeon_ring_write(ring, fence->seq);
  91.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_CMD, 0));
  92.         radeon_ring_write(ring, 0);
  93.  
  94.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_DATA0, 0));
  95.         radeon_ring_write(ring, 0);
  96.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_DATA1, 0));
  97.         radeon_ring_write(ring, 0);
  98.         radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_CMD, 0));
  99.         radeon_ring_write(ring, 2);
  100.         return;
  101. }
  102.  
  103. /**
  104.  * uvd_v1_0_resume - memory controller programming
  105.  *
  106.  * @rdev: radeon_device pointer
  107.  *
  108.  * Let the UVD memory controller know it's offsets
  109.  */
  110. int uvd_v1_0_resume(struct radeon_device *rdev)
  111. {
  112.         uint64_t addr;
  113.         uint32_t size;
  114.         int r;
  115.  
  116.         r = radeon_uvd_resume(rdev);
  117.         if (r)
  118.                 return r;
  119.  
  120.         /* programm the VCPU memory controller bits 0-27 */
  121.         addr = (rdev->uvd.gpu_addr >> 3) + 16;
  122.         size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size) >> 3;
  123.         WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
  124.         WREG32(UVD_VCPU_CACHE_SIZE0, size);
  125.  
  126.         addr += size;
  127.         size = RADEON_UVD_STACK_SIZE >> 3;
  128.         WREG32(UVD_VCPU_CACHE_OFFSET1, addr);
  129.         WREG32(UVD_VCPU_CACHE_SIZE1, size);
  130.  
  131.         addr += size;
  132.         size = RADEON_UVD_HEAP_SIZE >> 3;
  133.         WREG32(UVD_VCPU_CACHE_OFFSET2, addr);
  134.         WREG32(UVD_VCPU_CACHE_SIZE2, size);
  135.  
  136.         /* bits 28-31 */
  137.         addr = (rdev->uvd.gpu_addr >> 28) & 0xF;
  138.         WREG32(UVD_LMI_ADDR_EXT, (addr << 12) | (addr << 0));
  139.  
  140.         /* bits 32-39 */
  141.         addr = (rdev->uvd.gpu_addr >> 32) & 0xFF;
  142.         WREG32(UVD_LMI_EXT40_ADDR, addr | (0x9 << 16) | (0x1 << 31));
  143.  
  144.         WREG32(UVD_FW_START, *((uint32_t*)rdev->uvd.cpu_addr));
  145.  
  146.         return 0;
  147. }
  148.  
  149. /**
  150.  * uvd_v1_0_init - start and test UVD block
  151.  *
  152.  * @rdev: radeon_device pointer
  153.  *
  154.  * Initialize the hardware, boot up the VCPU and do some testing
  155.  */
  156. int uvd_v1_0_init(struct radeon_device *rdev)
  157. {
  158.         struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
  159.         uint32_t tmp;
  160.         int r;
  161.  
  162.         /* raise clocks while booting up the VCPU */
  163.         if (rdev->family < CHIP_RV740)
  164.                 radeon_set_uvd_clocks(rdev, 10000, 10000);
  165.         else
  166.                 radeon_set_uvd_clocks(rdev, 53300, 40000);
  167.  
  168.         r = uvd_v1_0_start(rdev);
  169.         if (r)
  170.                 goto done;
  171.  
  172.         ring->ready = true;
  173.         r = radeon_ring_test(rdev, R600_RING_TYPE_UVD_INDEX, ring);
  174.         if (r) {
  175.                 ring->ready = false;
  176.                 goto done;
  177.         }
  178.  
  179.         r = radeon_ring_lock(rdev, ring, 10);
  180.         if (r) {
  181.                 DRM_ERROR("radeon: ring failed to lock UVD ring (%d).\n", r);
  182.                 goto done;
  183.         }
  184.  
  185.         tmp = PACKET0(UVD_SEMA_WAIT_FAULT_TIMEOUT_CNTL, 0);
  186.         radeon_ring_write(ring, tmp);
  187.         radeon_ring_write(ring, 0xFFFFF);
  188.  
  189.         tmp = PACKET0(UVD_SEMA_WAIT_INCOMPLETE_TIMEOUT_CNTL, 0);
  190.         radeon_ring_write(ring, tmp);
  191.         radeon_ring_write(ring, 0xFFFFF);
  192.  
  193.         tmp = PACKET0(UVD_SEMA_SIGNAL_INCOMPLETE_TIMEOUT_CNTL, 0);
  194.         radeon_ring_write(ring, tmp);
  195.         radeon_ring_write(ring, 0xFFFFF);
  196.  
  197.         /* Clear timeout status bits */
  198.         radeon_ring_write(ring, PACKET0(UVD_SEMA_TIMEOUT_STATUS, 0));
  199.         radeon_ring_write(ring, 0x8);
  200.  
  201.         radeon_ring_write(ring, PACKET0(UVD_SEMA_CNTL, 0));
  202.         radeon_ring_write(ring, 3);
  203.  
  204.         radeon_ring_unlock_commit(rdev, ring, false);
  205.  
  206. done:
  207.         /* lower clocks again */
  208.         radeon_set_uvd_clocks(rdev, 0, 0);
  209.  
  210.         if (!r) {
  211.                 switch (rdev->family) {
  212.                 case CHIP_RV610:
  213.                 case CHIP_RV630:
  214.                 case CHIP_RV620:
  215.                         /* 64byte granularity workaround */
  216.                         WREG32(MC_CONFIG, 0);
  217.                         WREG32(MC_CONFIG, 1 << 4);
  218.                         WREG32(RS_DQ_RD_RET_CONF, 0x3f);
  219.                         WREG32(MC_CONFIG, 0x1f);
  220.  
  221.                         /* fall through */
  222.                 case CHIP_RV670:
  223.                 case CHIP_RV635:
  224.  
  225.                         /* write clean workaround */
  226.                         WREG32_P(UVD_VCPU_CNTL, 0x10, ~0x10);
  227.                         break;
  228.  
  229.                 default:
  230.                         /* TODO: Do we need more? */
  231.                         break;
  232.                 }
  233.  
  234.                 DRM_INFO("UVD initialized successfully.\n");
  235.         }
  236.  
  237.         return r;
  238. }
  239.  
  240. /**
  241.  * uvd_v1_0_fini - stop the hardware block
  242.  *
  243.  * @rdev: radeon_device pointer
  244.  *
  245.  * Stop the UVD block, mark ring as not ready any more
  246.  */
  247. void uvd_v1_0_fini(struct radeon_device *rdev)
  248. {
  249.         struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
  250.  
  251.         uvd_v1_0_stop(rdev);
  252.         ring->ready = false;
  253. }
  254.  
  255. /**
  256.  * uvd_v1_0_start - start UVD block
  257.  *
  258.  * @rdev: radeon_device pointer
  259.  *
  260.  * Setup and start the UVD block
  261.  */
  262. int uvd_v1_0_start(struct radeon_device *rdev)
  263. {
  264.         struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
  265.         uint32_t rb_bufsz;
  266.         int i, j, r;
  267.  
  268.         /* disable byte swapping */
  269.         u32 lmi_swap_cntl = 0;
  270.         u32 mp_swap_cntl = 0;
  271.  
  272.         /* disable clock gating */
  273.         WREG32(UVD_CGC_GATE, 0);
  274.  
  275.         /* disable interupt */
  276.         WREG32_P(UVD_MASTINT_EN, 0, ~(1 << 1));
  277.  
  278.         /* Stall UMC and register bus before resetting VCPU */
  279.         WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
  280.         WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
  281.         mdelay(1);
  282.  
  283.         /* put LMI, VCPU, RBC etc... into reset */
  284.         WREG32(UVD_SOFT_RESET, LMI_SOFT_RESET | VCPU_SOFT_RESET |
  285.                LBSI_SOFT_RESET | RBC_SOFT_RESET | CSM_SOFT_RESET |
  286.                CXW_SOFT_RESET | TAP_SOFT_RESET | LMI_UMC_SOFT_RESET);
  287.         mdelay(5);
  288.  
  289.         /* take UVD block out of reset */
  290.         WREG32_P(SRBM_SOFT_RESET, 0, ~SOFT_RESET_UVD);
  291.         mdelay(5);
  292.  
  293.         /* initialize UVD memory controller */
  294.         WREG32(UVD_LMI_CTRL, 0x40 | (1 << 8) | (1 << 13) |
  295.                              (1 << 21) | (1 << 9) | (1 << 20));
  296.  
  297. #ifdef __BIG_ENDIAN
  298.         /* swap (8 in 32) RB and IB */
  299.         lmi_swap_cntl = 0xa;
  300.         mp_swap_cntl = 0;
  301. #endif
  302.         WREG32(UVD_LMI_SWAP_CNTL, lmi_swap_cntl);
  303.         WREG32(UVD_MP_SWAP_CNTL, mp_swap_cntl);
  304.  
  305.         WREG32(UVD_MPC_SET_MUXA0, 0x40c2040);
  306.         WREG32(UVD_MPC_SET_MUXA1, 0x0);
  307.         WREG32(UVD_MPC_SET_MUXB0, 0x40c2040);
  308.         WREG32(UVD_MPC_SET_MUXB1, 0x0);
  309.         WREG32(UVD_MPC_SET_ALU, 0);
  310.         WREG32(UVD_MPC_SET_MUX, 0x88);
  311.  
  312.         /* take all subblocks out of reset, except VCPU */
  313.         WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
  314.         mdelay(5);
  315.  
  316.         /* enable VCPU clock */
  317.         WREG32(UVD_VCPU_CNTL,  1 << 9);
  318.  
  319.         /* enable UMC */
  320.         WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8));
  321.  
  322.         WREG32_P(UVD_RB_ARB_CTRL, 0, ~(1 << 3));
  323.  
  324.         /* boot up the VCPU */
  325.         WREG32(UVD_SOFT_RESET, 0);
  326.         mdelay(10);
  327.  
  328.         for (i = 0; i < 10; ++i) {
  329.                 uint32_t status;
  330.                 for (j = 0; j < 100; ++j) {
  331.                         status = RREG32(UVD_STATUS);
  332.                         if (status & 2)
  333.                                 break;
  334.                         mdelay(10);
  335.                 }
  336.                 r = 0;
  337.                 if (status & 2)
  338.                         break;
  339.  
  340.                 DRM_ERROR("UVD not responding, trying to reset the VCPU!!!\n");
  341.                 WREG32_P(UVD_SOFT_RESET, VCPU_SOFT_RESET, ~VCPU_SOFT_RESET);
  342.                 mdelay(10);
  343.                 WREG32_P(UVD_SOFT_RESET, 0, ~VCPU_SOFT_RESET);
  344.                 mdelay(10);
  345.                 r = -1;
  346.         }
  347.  
  348.         if (r) {
  349.                 DRM_ERROR("UVD not responding, giving up!!!\n");
  350.                 return r;
  351.         }
  352.  
  353.         /* enable interupt */
  354.         WREG32_P(UVD_MASTINT_EN, 3<<1, ~(3 << 1));
  355.  
  356.         /* force RBC into idle state */
  357.         WREG32(UVD_RBC_RB_CNTL, 0x11010101);
  358.  
  359.         /* Set the write pointer delay */
  360.         WREG32(UVD_RBC_RB_WPTR_CNTL, 0);
  361.  
  362.         /* programm the 4GB memory segment for rptr and ring buffer */
  363.         WREG32(UVD_LMI_EXT40_ADDR, upper_32_bits(ring->gpu_addr) |
  364.                                    (0x7 << 16) | (0x1 << 31));
  365.  
  366.         /* Initialize the ring buffer's read and write pointers */
  367.         WREG32(UVD_RBC_RB_RPTR, 0x0);
  368.  
  369.         ring->wptr = RREG32(UVD_RBC_RB_RPTR);
  370.         WREG32(UVD_RBC_RB_WPTR, ring->wptr);
  371.  
  372.         /* set the ring address */
  373.         WREG32(UVD_RBC_RB_BASE, ring->gpu_addr);
  374.  
  375.         /* Set ring buffer size */
  376.         rb_bufsz = order_base_2(ring->ring_size);
  377.         rb_bufsz = (0x1 << 8) | rb_bufsz;
  378.         WREG32_P(UVD_RBC_RB_CNTL, rb_bufsz, ~0x11f1f);
  379.  
  380.         return 0;
  381. }
  382.  
  383. /**
  384.  * uvd_v1_0_stop - stop UVD block
  385.  *
  386.  * @rdev: radeon_device pointer
  387.  *
  388.  * stop the UVD block
  389.  */
  390. void uvd_v1_0_stop(struct radeon_device *rdev)
  391. {
  392.         /* force RBC into idle state */
  393.         WREG32(UVD_RBC_RB_CNTL, 0x11010101);
  394.  
  395.         /* Stall UMC and register bus before resetting VCPU */
  396.         WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
  397.         WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
  398.         mdelay(1);
  399.  
  400.         /* put VCPU into reset */
  401.         WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
  402.         mdelay(5);
  403.  
  404.         /* disable VCPU clock */
  405.         WREG32(UVD_VCPU_CNTL, 0x0);
  406.  
  407.         /* Unstall UMC and register bus */
  408.         WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8));
  409.         WREG32_P(UVD_RB_ARB_CTRL, 0, ~(1 << 3));
  410. }
  411.  
  412. /**
  413.  * uvd_v1_0_ring_test - register write test
  414.  *
  415.  * @rdev: radeon_device pointer
  416.  * @ring: radeon_ring pointer
  417.  *
  418.  * Test if we can successfully write to the context register
  419.  */
  420. int uvd_v1_0_ring_test(struct radeon_device *rdev, struct radeon_ring *ring)
  421. {
  422.         uint32_t tmp = 0;
  423.         unsigned i;
  424.         int r;
  425.  
  426.         WREG32(UVD_CONTEXT_ID, 0xCAFEDEAD);
  427.         r = radeon_ring_lock(rdev, ring, 3);
  428.         if (r) {
  429.                 DRM_ERROR("radeon: cp failed to lock ring %d (%d).\n",
  430.                           ring->idx, r);
  431.                 return r;
  432.         }
  433.         radeon_ring_write(ring, PACKET0(UVD_CONTEXT_ID, 0));
  434.         radeon_ring_write(ring, 0xDEADBEEF);
  435.         radeon_ring_unlock_commit(rdev, ring, false);
  436.         for (i = 0; i < rdev->usec_timeout; i++) {
  437.                 tmp = RREG32(UVD_CONTEXT_ID);
  438.                 if (tmp == 0xDEADBEEF)
  439.                         break;
  440.                 DRM_UDELAY(1);
  441.         }
  442.  
  443.         if (i < rdev->usec_timeout) {
  444.                 DRM_INFO("ring test on %d succeeded in %d usecs\n",
  445.                          ring->idx, i);
  446.         } else {
  447.                 DRM_ERROR("radeon: ring %d test failed (0x%08X)\n",
  448.                           ring->idx, tmp);
  449.                 r = -EINVAL;
  450.         }
  451.         return r;
  452. }
  453.  
  454. /**
  455.  * uvd_v1_0_semaphore_emit - emit semaphore command
  456.  *
  457.  * @rdev: radeon_device pointer
  458.  * @ring: radeon_ring pointer
  459.  * @semaphore: semaphore to emit commands for
  460.  * @emit_wait: true if we should emit a wait command
  461.  *
  462.  * Emit a semaphore command (either wait or signal) to the UVD ring.
  463.  */
  464. bool uvd_v1_0_semaphore_emit(struct radeon_device *rdev,
  465.                              struct radeon_ring *ring,
  466.                              struct radeon_semaphore *semaphore,
  467.                              bool emit_wait)
  468. {
  469.         /* disable semaphores for UVD V1 hardware */
  470.         return false;
  471. }
  472.  
  473. /**
  474.  * uvd_v1_0_ib_execute - execute indirect buffer
  475.  *
  476.  * @rdev: radeon_device pointer
  477.  * @ib: indirect buffer to execute
  478.  *
  479.  * Write ring commands to execute the indirect buffer
  480.  */
  481. void uvd_v1_0_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib)
  482. {
  483.         struct radeon_ring *ring = &rdev->ring[ib->ring];
  484.  
  485.         radeon_ring_write(ring, PACKET0(UVD_RBC_IB_BASE, 0));
  486.         radeon_ring_write(ring, ib->gpu_addr);
  487.         radeon_ring_write(ring, PACKET0(UVD_RBC_IB_SIZE, 0));
  488.         radeon_ring_write(ring, ib->length_dw);
  489. }
  490.  
  491. /**
  492.  * uvd_v1_0_ib_test - test ib execution
  493.  *
  494.  * @rdev: radeon_device pointer
  495.  * @ring: radeon_ring pointer
  496.  *
  497.  * Test if we can successfully execute an IB
  498.  */
  499. int uvd_v1_0_ib_test(struct radeon_device *rdev, struct radeon_ring *ring)
  500. {
  501.         struct radeon_fence *fence = NULL;
  502.         int r;
  503.  
  504.         if (rdev->family < CHIP_RV740)
  505.                 r = radeon_set_uvd_clocks(rdev, 10000, 10000);
  506.         else
  507.                 r = radeon_set_uvd_clocks(rdev, 53300, 40000);
  508.         if (r) {
  509.                 DRM_ERROR("radeon: failed to raise UVD clocks (%d).\n", r);
  510.                 return r;
  511.         }
  512.  
  513.         r = radeon_uvd_get_create_msg(rdev, ring->idx, 1, NULL);
  514.         if (r) {
  515.                 DRM_ERROR("radeon: failed to get create msg (%d).\n", r);
  516.                 goto error;
  517.         }
  518.  
  519.         r = radeon_uvd_get_destroy_msg(rdev, ring->idx, 1, &fence);
  520.         if (r) {
  521.                 DRM_ERROR("radeon: failed to get destroy ib (%d).\n", r);
  522.                 goto error;
  523.         }
  524.  
  525.         r = radeon_fence_wait(fence, false);
  526.         if (r) {
  527.                 DRM_ERROR("radeon: fence wait failed (%d).\n", r);
  528.                 goto error;
  529.         }
  530.         DRM_INFO("ib test on ring %d succeeded\n",  ring->idx);
  531. error:
  532.         radeon_fence_unref(&fence);
  533.         radeon_set_uvd_clocks(rdev, 0, 0);
  534.         return r;
  535. }
  536.