Subversion Repositories Kolibri OS

Rev

Rev 4104 | Rev 4560 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright 2006 Dave Airlie <airlied@linux.ie>
  3.  * Copyright © 2006-2007 Intel Corporation
  4.  *
  5.  * Permission is hereby granted, free of charge, to any person obtaining a
  6.  * copy of this software and associated documentation files (the "Software"),
  7.  * to deal in the Software without restriction, including without limitation
  8.  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  9.  * and/or sell copies of the Software, and to permit persons to whom the
  10.  * Software is furnished to do so, subject to the following conditions:
  11.  *
  12.  * The above copyright notice and this permission notice (including the next
  13.  * paragraph) shall be included in all copies or substantial portions of the
  14.  * Software.
  15.  *
  16.  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17.  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18.  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19.  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20.  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21.  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22.  * DEALINGS IN THE SOFTWARE.
  23.  *
  24.  * Authors:
  25.  *      Eric Anholt <eric@anholt.net>
  26.  */
  27. #include <linux/i2c.h>
  28. #include <linux/slab.h>
  29. #include <drm/drmP.h>
  30. #include <drm/drm_crtc.h>
  31. #include "intel_drv.h"
  32. #include <drm/i915_drm.h>
  33. #include "i915_drv.h"
  34. #include "dvo.h"
  35.  
  36. #define SIL164_ADDR     0x38
  37. #define CH7xxx_ADDR     0x76
  38. #define TFP410_ADDR     0x38
  39. #define NS2501_ADDR     0x38
  40.  
  41. static const struct intel_dvo_device intel_dvo_devices[] = {
  42.         {
  43.                 .type = INTEL_DVO_CHIP_TMDS,
  44.                 .name = "sil164",
  45.                 .dvo_reg = DVOC,
  46.                 .slave_addr = SIL164_ADDR,
  47.                 .dev_ops = &sil164_ops,
  48.         },
  49.         {
  50.                 .type = INTEL_DVO_CHIP_TMDS,
  51.                 .name = "ch7xxx",
  52.                 .dvo_reg = DVOC,
  53.                 .slave_addr = CH7xxx_ADDR,
  54.                 .dev_ops = &ch7xxx_ops,
  55.         },
  56.         {
  57.                 .type = INTEL_DVO_CHIP_TMDS,
  58.                 .name = "ch7xxx",
  59.                 .dvo_reg = DVOC,
  60.                 .slave_addr = 0x75, /* For some ch7010 */
  61.                 .dev_ops = &ch7xxx_ops,
  62.         },
  63.         {
  64.                 .type = INTEL_DVO_CHIP_LVDS,
  65.                 .name = "ivch",
  66.                 .dvo_reg = DVOA,
  67.                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  68.                 .dev_ops = &ivch_ops,
  69.         },
  70.         {
  71.                 .type = INTEL_DVO_CHIP_TMDS,
  72.                 .name = "tfp410",
  73.                 .dvo_reg = DVOC,
  74.                 .slave_addr = TFP410_ADDR,
  75.                 .dev_ops = &tfp410_ops,
  76.         },
  77.         {
  78.                 .type = INTEL_DVO_CHIP_LVDS,
  79.                 .name = "ch7017",
  80.                 .dvo_reg = DVOC,
  81.                 .slave_addr = 0x75,
  82.                 .gpio = GMBUS_PORT_DPB,
  83.                 .dev_ops = &ch7017_ops,
  84.         },
  85.         {
  86.                 .type = INTEL_DVO_CHIP_TMDS,
  87.                 .name = "ns2501",
  88.                 .dvo_reg = DVOC,
  89.                 .slave_addr = NS2501_ADDR,
  90.                 .dev_ops = &ns2501_ops,
  91.         }
  92. };
  93.  
  94. struct intel_dvo {
  95.         struct intel_encoder base;
  96.  
  97.         struct intel_dvo_device dev;
  98.  
  99.         struct drm_display_mode *panel_fixed_mode;
  100.         bool panel_wants_dither;
  101. };
  102.  
  103. static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
  104. {
  105.         return container_of(encoder, struct intel_dvo, base);
  106. }
  107.  
  108. static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)
  109. {
  110.         return enc_to_dvo(intel_attached_encoder(connector));
  111. }
  112.  
  113. static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
  114. {
  115.         struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);
  116.  
  117.         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
  118. }
  119.  
  120. static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
  121.                                    enum pipe *pipe)
  122. {
  123.         struct drm_device *dev = encoder->base.dev;
  124.         struct drm_i915_private *dev_priv = dev->dev_private;
  125.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  126.         u32 tmp;
  127.  
  128.         tmp = I915_READ(intel_dvo->dev.dvo_reg);
  129.  
  130.         if (!(tmp & DVO_ENABLE))
  131.                 return false;
  132.  
  133.         *pipe = PORT_TO_PIPE(tmp);
  134.  
  135.         return true;
  136. }
  137.  
  138. static void intel_dvo_get_config(struct intel_encoder *encoder,
  139.                                  struct intel_crtc_config *pipe_config)
  140. {
  141.         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
  142.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  143.         u32 tmp, flags = 0;
  144.  
  145.         tmp = I915_READ(intel_dvo->dev.dvo_reg);
  146.         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
  147.                 flags |= DRM_MODE_FLAG_PHSYNC;
  148.         else
  149.                 flags |= DRM_MODE_FLAG_NHSYNC;
  150.         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
  151.                 flags |= DRM_MODE_FLAG_PVSYNC;
  152.         else
  153.                 flags |= DRM_MODE_FLAG_NVSYNC;
  154.  
  155.         pipe_config->adjusted_mode.flags |= flags;
  156. }
  157.  
  158. static void intel_disable_dvo(struct intel_encoder *encoder)
  159. {
  160.         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
  161.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  162.         u32 dvo_reg = intel_dvo->dev.dvo_reg;
  163.         u32 temp = I915_READ(dvo_reg);
  164.  
  165.         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
  166.         I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
  167.         I915_READ(dvo_reg);
  168. }
  169.  
  170. static void intel_enable_dvo(struct intel_encoder *encoder)
  171. {
  172.         struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
  173.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  174.         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
  175.         u32 dvo_reg = intel_dvo->dev.dvo_reg;
  176.         u32 temp = I915_READ(dvo_reg);
  177.  
  178.                 I915_WRITE(dvo_reg, temp | DVO_ENABLE);
  179.                 I915_READ(dvo_reg);
  180.         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
  181.                                          &crtc->config.requested_mode,
  182.                                          &crtc->config.adjusted_mode);
  183.  
  184.         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
  185. }
  186.  
  187. /* Special dpms function to support cloning between dvo/sdvo/crt. */
  188. static void intel_dvo_dpms(struct drm_connector *connector, int mode)
  189. {
  190.         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
  191.         struct drm_crtc *crtc;
  192.         struct intel_crtc_config *config;
  193.  
  194.         /* dvo supports only 2 dpms states. */
  195.         if (mode != DRM_MODE_DPMS_ON)
  196.                 mode = DRM_MODE_DPMS_OFF;
  197.  
  198.         if (mode == connector->dpms)
  199.                 return;
  200.  
  201.         connector->dpms = mode;
  202.  
  203.         /* Only need to change hw state when actually enabled */
  204.         crtc = intel_dvo->base.base.crtc;
  205.         if (!crtc) {
  206.                 intel_dvo->base.connectors_active = false;
  207.                 return;
  208.         }
  209.  
  210.         /* We call connector dpms manually below in case pipe dpms doesn't
  211.          * change due to cloning. */
  212.         if (mode == DRM_MODE_DPMS_ON) {
  213.                 config = &to_intel_crtc(crtc)->config;
  214.  
  215.                 intel_dvo->base.connectors_active = true;
  216.  
  217.                 intel_crtc_update_dpms(crtc);
  218.  
  219.                 intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
  220.                                                  &config->requested_mode,
  221.                                                  &config->adjusted_mode);
  222.  
  223.                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
  224.         } else {
  225.                 intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
  226.  
  227.                 intel_dvo->base.connectors_active = false;
  228.  
  229.                 intel_crtc_update_dpms(crtc);
  230.         }
  231.  
  232.         intel_modeset_check_state(connector->dev);
  233. }
  234.  
  235. static int intel_dvo_mode_valid(struct drm_connector *connector,
  236.                                 struct drm_display_mode *mode)
  237. {
  238.         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
  239.  
  240.         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
  241.                 return MODE_NO_DBLESCAN;
  242.  
  243.         /* XXX: Validate clock range */
  244.  
  245.         if (intel_dvo->panel_fixed_mode) {
  246.                 if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)
  247.                         return MODE_PANEL;
  248.                 if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)
  249.                         return MODE_PANEL;
  250.         }
  251.  
  252.         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
  253. }
  254.  
  255. static bool intel_dvo_compute_config(struct intel_encoder *encoder,
  256.                                      struct intel_crtc_config *pipe_config)
  257. {
  258.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  259.         struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
  260.  
  261.         /* If we have timings from the BIOS for the panel, put them in
  262.          * to the adjusted mode.  The CRTC will be set up for this mode,
  263.          * with the panel scaling set up to source from the H/VDisplay
  264.          * of the original mode.
  265.          */
  266.         if (intel_dvo->panel_fixed_mode != NULL) {
  267. #define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x
  268.                 C(hdisplay);
  269.                 C(hsync_start);
  270.                 C(hsync_end);
  271.                 C(htotal);
  272.                 C(vdisplay);
  273.                 C(vsync_start);
  274.                 C(vsync_end);
  275.                 C(vtotal);
  276.                 C(clock);
  277. #undef C
  278.  
  279.                 drm_mode_set_crtcinfo(adjusted_mode, 0);
  280.         }
  281.  
  282.         if (intel_dvo->dev.dev_ops->mode_fixup)
  283.                 return intel_dvo->dev.dev_ops->mode_fixup(&intel_dvo->dev,
  284.                                                           &pipe_config->requested_mode,
  285.                                                           adjusted_mode);
  286.  
  287.         return true;
  288. }
  289.  
  290. static void intel_dvo_mode_set(struct intel_encoder *encoder)
  291. {
  292.         struct drm_device *dev = encoder->base.dev;
  293.         struct drm_i915_private *dev_priv = dev->dev_private;
  294.         struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
  295.         struct drm_display_mode *adjusted_mode = &crtc->config.adjusted_mode;
  296.         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
  297.         int pipe = crtc->pipe;
  298.         u32 dvo_val;
  299.         u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
  300.  
  301.         switch (dvo_reg) {
  302.         case DVOA:
  303.         default:
  304.                 dvo_srcdim_reg = DVOA_SRCDIM;
  305.                 break;
  306.         case DVOB:
  307.                 dvo_srcdim_reg = DVOB_SRCDIM;
  308.                 break;
  309.         case DVOC:
  310.                 dvo_srcdim_reg = DVOC_SRCDIM;
  311.                 break;
  312.         }
  313.  
  314.         /* Save the data order, since I don't know what it should be set to. */
  315.         dvo_val = I915_READ(dvo_reg) &
  316.                   (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
  317.         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
  318.                    DVO_BLANK_ACTIVE_HIGH;
  319.  
  320.         if (pipe == 1)
  321.                 dvo_val |= DVO_PIPE_B_SELECT;
  322.         dvo_val |= DVO_PIPE_STALL;
  323.         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
  324.                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
  325.         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
  326.                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
  327.  
  328.         /*I915_WRITE(DVOB_SRCDIM,
  329.           (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
  330.           (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
  331.         I915_WRITE(dvo_srcdim_reg,
  332.                    (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
  333.                    (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
  334.         /*I915_WRITE(DVOB, dvo_val);*/
  335.         I915_WRITE(dvo_reg, dvo_val);
  336. }
  337.  
  338. /**
  339.  * Detect the output connection on our DVO device.
  340.  *
  341.  * Unimplemented.
  342.  */
  343. static enum drm_connector_status
  344. intel_dvo_detect(struct drm_connector *connector, bool force)
  345. {
  346.         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
  347.         DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
  348.                       connector->base.id, drm_get_connector_name(connector));
  349.         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
  350. }
  351.  
  352. static int intel_dvo_get_modes(struct drm_connector *connector)
  353. {
  354.         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
  355.         struct drm_i915_private *dev_priv = connector->dev->dev_private;
  356.  
  357.         /* We should probably have an i2c driver get_modes function for those
  358.          * devices which will have a fixed set of modes determined by the chip
  359.          * (TV-out, for example), but for now with just TMDS and LVDS,
  360.          * that's not the case.
  361.          */
  362.         intel_ddc_get_modes(connector,
  363.                             intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
  364.         if (!list_empty(&connector->probed_modes))
  365.                 return 1;
  366.  
  367.         if (intel_dvo->panel_fixed_mode != NULL) {
  368.                 struct drm_display_mode *mode;
  369.                 mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);
  370.                 if (mode) {
  371.                         drm_mode_probed_add(connector, mode);
  372.                         return 1;
  373.                 }
  374.         }
  375.  
  376.         return 0;
  377. }
  378.  
  379. static void intel_dvo_destroy(struct drm_connector *connector)
  380. {
  381.         drm_sysfs_connector_remove(connector);
  382.         drm_connector_cleanup(connector);
  383.         kfree(connector);
  384. }
  385.  
  386. static const struct drm_connector_funcs intel_dvo_connector_funcs = {
  387.         .dpms = intel_dvo_dpms,
  388.         .detect = intel_dvo_detect,
  389.         .destroy = intel_dvo_destroy,
  390.         .fill_modes = drm_helper_probe_single_connector_modes,
  391. };
  392.  
  393. static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
  394.         .mode_valid = intel_dvo_mode_valid,
  395.         .get_modes = intel_dvo_get_modes,
  396.         .best_encoder = intel_best_encoder,
  397. };
  398.  
  399. static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
  400. {
  401.         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
  402.  
  403.         if (intel_dvo->dev.dev_ops->destroy)
  404.                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
  405.  
  406.         kfree(intel_dvo->panel_fixed_mode);
  407.  
  408.         intel_encoder_destroy(encoder);
  409. }
  410.  
  411. static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
  412.         .destroy = intel_dvo_enc_destroy,
  413. };
  414.  
  415. /**
  416.  * Attempts to get a fixed panel timing for LVDS (currently only the i830).
  417.  *
  418.  * Other chips with DVO LVDS will need to extend this to deal with the LVDS
  419.  * chip being on DVOB/C and having multiple pipes.
  420.  */
  421. static struct drm_display_mode *
  422. intel_dvo_get_current_mode(struct drm_connector *connector)
  423. {
  424.         struct drm_device *dev = connector->dev;
  425.         struct drm_i915_private *dev_priv = dev->dev_private;
  426.         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
  427.         uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);
  428.         struct drm_display_mode *mode = NULL;
  429.  
  430.         /* If the DVO port is active, that'll be the LVDS, so we can pull out
  431.          * its timings to get how the BIOS set up the panel.
  432.          */
  433.         if (dvo_val & DVO_ENABLE) {
  434.                 struct drm_crtc *crtc;
  435.                 int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
  436.  
  437.                 crtc = intel_get_crtc_for_pipe(dev, pipe);
  438.                 if (crtc) {
  439.                         mode = intel_crtc_mode_get(dev, crtc);
  440.                         if (mode) {
  441.                                 mode->type |= DRM_MODE_TYPE_PREFERRED;
  442.                                 if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
  443.                                         mode->flags |= DRM_MODE_FLAG_PHSYNC;
  444.                                 if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
  445.                                         mode->flags |= DRM_MODE_FLAG_PVSYNC;
  446.                         }
  447.                 }
  448.         }
  449.  
  450.         return mode;
  451. }
  452.  
  453. void intel_dvo_init(struct drm_device *dev)
  454. {
  455.         struct drm_i915_private *dev_priv = dev->dev_private;
  456.         struct intel_encoder *intel_encoder;
  457.         struct intel_dvo *intel_dvo;
  458.         struct intel_connector *intel_connector;
  459.         int i;
  460.         int encoder_type = DRM_MODE_ENCODER_NONE;
  461.  
  462.         intel_dvo = kzalloc(sizeof(struct intel_dvo), GFP_KERNEL);
  463.         if (!intel_dvo)
  464.                 return;
  465.  
  466.         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
  467.         if (!intel_connector) {
  468.                 kfree(intel_dvo);
  469.                 return;
  470.         }
  471.  
  472.         intel_encoder = &intel_dvo->base;
  473.         drm_encoder_init(dev, &intel_encoder->base,
  474.                          &intel_dvo_enc_funcs, encoder_type);
  475.  
  476.         intel_encoder->disable = intel_disable_dvo;
  477.         intel_encoder->enable = intel_enable_dvo;
  478.         intel_encoder->get_hw_state = intel_dvo_get_hw_state;
  479.         intel_encoder->get_config = intel_dvo_get_config;
  480.         intel_encoder->compute_config = intel_dvo_compute_config;
  481.         intel_encoder->mode_set = intel_dvo_mode_set;
  482.         intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
  483.  
  484.         /* Now, try to find a controller */
  485.         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
  486.                 struct drm_connector *connector = &intel_connector->base;
  487.                 const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
  488.                 struct i2c_adapter *i2c;
  489.                 int gpio;
  490.                 bool dvoinit;
  491.  
  492.                 /* Allow the I2C driver info to specify the GPIO to be used in
  493.                  * special cases, but otherwise default to what's defined
  494.                  * in the spec.
  495.                  */
  496.                 if (intel_gmbus_is_port_valid(dvo->gpio))
  497.                         gpio = dvo->gpio;
  498.                 else if (dvo->type == INTEL_DVO_CHIP_LVDS)
  499.                         gpio = GMBUS_PORT_SSC;
  500.                 else
  501.                         gpio = GMBUS_PORT_DPB;
  502.  
  503.                 /* Set up the I2C bus necessary for the chip we're probing.
  504.                  * It appears that everything is on GPIOE except for panels
  505.                  * on i830 laptops, which are on GPIOB (DVOA).
  506.                  */
  507.                 i2c = intel_gmbus_get_adapter(dev_priv, gpio);
  508.  
  509.                 intel_dvo->dev = *dvo;
  510.  
  511.                 /* GMBUS NAK handling seems to be unstable, hence let the
  512.                  * transmitter detection run in bit banging mode for now.
  513.                  */
  514.                 intel_gmbus_force_bit(i2c, true);
  515.  
  516.                 dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
  517.  
  518.                 intel_gmbus_force_bit(i2c, false);
  519.  
  520.                 if (!dvoinit)
  521.                         continue;
  522.  
  523.                 intel_encoder->type = INTEL_OUTPUT_DVO;
  524.                 intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
  525.                 switch (dvo->type) {
  526.                 case INTEL_DVO_CHIP_TMDS:
  527.                         intel_encoder->cloneable = true;
  528.                         drm_connector_init(dev, connector,
  529.                                            &intel_dvo_connector_funcs,
  530.                                            DRM_MODE_CONNECTOR_DVII);
  531.                         encoder_type = DRM_MODE_ENCODER_TMDS;
  532.                         break;
  533.                 case INTEL_DVO_CHIP_LVDS:
  534.                         intel_encoder->cloneable = false;
  535.                         drm_connector_init(dev, connector,
  536.                                            &intel_dvo_connector_funcs,
  537.                                            DRM_MODE_CONNECTOR_LVDS);
  538.                         encoder_type = DRM_MODE_ENCODER_LVDS;
  539.                         break;
  540.                 }
  541.  
  542.                 drm_connector_helper_add(connector,
  543.                                          &intel_dvo_connector_helper_funcs);
  544.                 connector->display_info.subpixel_order = SubPixelHorizontalRGB;
  545.                 connector->interlace_allowed = false;
  546.                 connector->doublescan_allowed = false;
  547.  
  548.                 intel_connector_attach_encoder(intel_connector, intel_encoder);
  549.                 if (dvo->type == INTEL_DVO_CHIP_LVDS) {
  550.                         /* For our LVDS chipsets, we should hopefully be able
  551.                          * to dig the fixed panel mode out of the BIOS data.
  552.                          * However, it's in a different format from the BIOS
  553.                          * data on chipsets with integrated LVDS (stored in AIM
  554.                          * headers, likely), so for now, just get the current
  555.                          * mode being output through DVO.
  556.                          */
  557.                         intel_dvo->panel_fixed_mode =
  558.                                 intel_dvo_get_current_mode(connector);
  559.                         intel_dvo->panel_wants_dither = true;
  560.                 }
  561.  
  562.                 drm_sysfs_connector_add(connector);
  563.                 return;
  564.         }
  565.  
  566.         drm_encoder_cleanup(&intel_encoder->base);
  567.         kfree(intel_dvo);
  568.         kfree(intel_connector);
  569. }
  570.