Subversion Repositories Kolibri OS

Rev

Blame | Last modification | View Log | RSS feed

  1. # Makefile.in generated by automake 1.14.1 from Makefile.am.
  2. # @configure_input@
  3.  
  4. # Copyright (C) 1994-2013 Free Software Foundation, Inc.
  5.  
  6. # This Makefile.in is free software; the Free Software Foundation
  7. # gives unlimited permission to copy and/or distribute it,
  8. # with or without modifications, as long as this notice is preserved.
  9.  
  10. # This program is distributed in the hope that it will be useful,
  11. # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12. # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13. # PARTICULAR PURPOSE.
  14.  
  15. @SET_MAKE@
  16.  
  17. # Copyright (C) 2012 Intel Corporation. All Rights Reserved.
  18. #
  19. # Permission is hereby granted, free of charge, to any person obtaining a
  20. # copy of this software and associated documentation files (the
  21. # "Software"), to deal in the Software without restriction, including
  22. # without limitation the rights to use, copy, modify, merge, publish,
  23. # distribute, sub license, and/or sell copies of the Software, and to
  24. # permit persons to whom the Software is furnished to do so, subject to
  25. # the following conditions:
  26. #
  27. # The above copyright notice and this permission notice (including the
  28. # next paragraph) shall be included in all copies or substantial portions
  29. # of the Software.
  30. #
  31. # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  32. # OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  33. # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
  34. # IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
  35. # ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
  36. # TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
  37. # SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  38.  
  39.  
  40. VPATH = @srcdir@
  41. am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  42. am__make_running_with_option = \
  43.   case $${target_option-} in \
  44.       ?) ;; \
  45.       *) echo "am__make_running_with_option: internal error: invalid" \
  46.               "target option '$${target_option-}' specified" >&2; \
  47.          exit 1;; \
  48.   esac; \
  49.   has_opt=no; \
  50.   sane_makeflags=$$MAKEFLAGS; \
  51.   if $(am__is_gnu_make); then \
  52.     sane_makeflags=$$MFLAGS; \
  53.   else \
  54.     case $$MAKEFLAGS in \
  55.       *\\[\ \   ]*) \
  56.         bs=\\; \
  57.         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  58.           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  59.     esac; \
  60.   fi; \
  61.   skip_next=no; \
  62.   strip_trailopt () \
  63.   { \
  64.     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  65.   }; \
  66.   for flg in $$sane_makeflags; do \
  67.     test $$skip_next = yes && { skip_next=no; continue; }; \
  68.     case $$flg in \
  69.       *=*|--*) continue;; \
  70.         -*I) strip_trailopt 'I'; skip_next=yes;; \
  71.       -*I?*) strip_trailopt 'I';; \
  72.         -*O) strip_trailopt 'O'; skip_next=yes;; \
  73.       -*O?*) strip_trailopt 'O';; \
  74.         -*l) strip_trailopt 'l'; skip_next=yes;; \
  75.       -*l?*) strip_trailopt 'l';; \
  76.       -[dEDm]) skip_next=yes;; \
  77.       -[JT]) skip_next=yes;; \
  78.     esac; \
  79.     case $$flg in \
  80.       *$$target_option*) has_opt=yes; break;; \
  81.     esac; \
  82.   done; \
  83.   test $$has_opt = yes
  84. am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  85. am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  86. pkgdatadir = $(datadir)/@PACKAGE@
  87. pkgincludedir = $(includedir)/@PACKAGE@
  88. pkglibdir = $(libdir)/@PACKAGE@
  89. pkglibexecdir = $(libexecdir)/@PACKAGE@
  90. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  91. install_sh_DATA = $(install_sh) -c -m 644
  92. install_sh_PROGRAM = $(install_sh) -c
  93. install_sh_SCRIPT = $(install_sh) -c
  94. INSTALL_HEADER = $(INSTALL_DATA)
  95. transform = $(program_transform_name)
  96. NORMAL_INSTALL = :
  97. PRE_INSTALL = :
  98. POST_INSTALL = :
  99. NORMAL_UNINSTALL = :
  100. PRE_UNINSTALL = :
  101. POST_UNINSTALL = :
  102. build_triplet = @build@
  103. host_triplet = @host@
  104. subdir = va/wayland
  105. DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  106.         $(top_srcdir)/depcomp $(libva_waylandinclude_HEADERS) \
  107.         $(noinst_HEADERS)
  108. ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  109. am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  110. am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  111.         $(ACLOCAL_M4)
  112. mkinstalldirs = $(install_sh) -d
  113. CONFIG_HEADER = $(top_builddir)/config.h
  114. CONFIG_CLEAN_FILES =
  115. CONFIG_CLEAN_VPATH_FILES =
  116. LTLIBRARIES = $(noinst_LTLIBRARIES)
  117. libva_wayland_la_LIBADD =
  118. am__objects_1 = va_wayland.lo va_wayland_drm.lo va_wayland_emgd.lo \
  119.         va_drm_utils.lo
  120. am__objects_2 =
  121. am_libva_wayland_la_OBJECTS = $(am__objects_1) $(am__objects_2)
  122. libva_wayland_la_OBJECTS = $(am_libva_wayland_la_OBJECTS)
  123. AM_V_lt = $(am__v_lt_@AM_V@)
  124. am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
  125. am__v_lt_0 = --silent
  126. am__v_lt_1 =
  127. AM_V_P = $(am__v_P_@AM_V@)
  128. am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  129. am__v_P_0 = false
  130. am__v_P_1 = :
  131. AM_V_GEN = $(am__v_GEN_@AM_V@)
  132. am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  133. am__v_GEN_0 = @echo "  GEN     " $@;
  134. am__v_GEN_1 =
  135. AM_V_at = $(am__v_at_@AM_V@)
  136. am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
  137. am__v_at_0 = @
  138. am__v_at_1 =
  139. DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
  140. depcomp = $(SHELL) $(top_srcdir)/depcomp
  141. am__depfiles_maybe = depfiles
  142. am__mv = mv -f
  143. COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
  144.         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
  145. LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
  146.         $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
  147.         $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
  148.         $(AM_CFLAGS) $(CFLAGS)
  149. AM_V_CC = $(am__v_CC_@AM_V@)
  150. am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
  151. am__v_CC_0 = @echo "  CC      " $@;
  152. am__v_CC_1 =
  153. CCLD = $(CC)
  154. LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
  155.         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
  156.         $(AM_LDFLAGS) $(LDFLAGS) -o $@
  157. AM_V_CCLD = $(am__v_CCLD_@AM_V@)
  158. am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
  159. am__v_CCLD_0 = @echo "  CCLD    " $@;
  160. am__v_CCLD_1 =
  161. SOURCES = $(libva_wayland_la_SOURCES)
  162. DIST_SOURCES = $(libva_wayland_la_SOURCES)
  163. RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
  164.         ctags-recursive dvi-recursive html-recursive info-recursive \
  165.         install-data-recursive install-dvi-recursive \
  166.         install-exec-recursive install-html-recursive \
  167.         install-info-recursive install-pdf-recursive \
  168.         install-ps-recursive install-recursive installcheck-recursive \
  169.         installdirs-recursive pdf-recursive ps-recursive \
  170.         tags-recursive uninstall-recursive
  171. am__can_run_installinfo = \
  172.   case $$AM_UPDATE_INFO_DIR in \
  173.     n|no|NO) false;; \
  174.     *) (install-info --version) >/dev/null 2>&1;; \
  175.   esac
  176. am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  177. am__vpath_adj = case $$p in \
  178.     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  179.     *) f=$$p;; \
  180.   esac;
  181. am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  182. am__install_max = 40
  183. am__nobase_strip_setup = \
  184.   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  185. am__nobase_strip = \
  186.   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  187. am__nobase_list = $(am__nobase_strip_setup); \
  188.   for p in $$list; do echo "$$p $$p"; done | \
  189.   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  190.   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  191.     if (++n[$$2] == $(am__install_max)) \
  192.       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  193.     END { for (dir in files) print dir, files[dir] }'
  194. am__base_list = \
  195.   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  196.   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  197. am__uninstall_files_from_dir = { \
  198.   test -z "$$files" \
  199.     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  200.     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
  201.          $(am__cd) "$$dir" && rm -f $$files; }; \
  202.   }
  203. am__installdirs = "$(DESTDIR)$(libva_waylandincludedir)"
  204. HEADERS = $(libva_waylandinclude_HEADERS) $(noinst_HEADERS)
  205. RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  206.   distclean-recursive maintainer-clean-recursive
  207. am__recursive_targets = \
  208.   $(RECURSIVE_TARGETS) \
  209.   $(RECURSIVE_CLEAN_TARGETS) \
  210.   $(am__extra_recursive_targets)
  211. AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
  212.         distdir
  213. am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
  214. # Read a list of newline-separated strings from the standard input,
  215. # and print each of them once, without duplicates.  Input order is
  216. # *not* preserved.
  217. am__uniquify_input = $(AWK) '\
  218.   BEGIN { nonempty = 0; } \
  219.   { items[$$0] = 1; nonempty = 1; } \
  220.   END { if (nonempty) { for (i in items) print i; }; } \
  221. '
  222. # Make sure the list of sources is unique.  This is necessary because,
  223. # e.g., the same source file might be shared among _SOURCES variables
  224. # for different programs/libraries.
  225. am__define_uniq_tagged_files = \
  226.   list='$(am__tagged_files)'; \
  227.   unique=`for i in $$list; do \
  228.     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  229.   done | $(am__uniquify_input)`
  230. ETAGS = etags
  231. CTAGS = ctags
  232. DIST_SUBDIRS = $(SUBDIRS)
  233. DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  234. am__relativize = \
  235.   dir0=`pwd`; \
  236.   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  237.   sed_rest='s,^[^/]*/*,,'; \
  238.   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  239.   sed_butlast='s,/*[^/]*$$,,'; \
  240.   while test -n "$$dir1"; do \
  241.     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
  242.     if test "$$first" != "."; then \
  243.       if test "$$first" = ".."; then \
  244.         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
  245.         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
  246.       else \
  247.         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
  248.         if test "$$first2" = "$$first"; then \
  249.           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
  250.         else \
  251.           dir2="../$$dir2"; \
  252.         fi; \
  253.         dir0="$$dir0"/"$$first"; \
  254.       fi; \
  255.     fi; \
  256.     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  257.   done; \
  258.   reldir="$$dir2"
  259. ACLOCAL = @ACLOCAL@
  260. AMTAR = @AMTAR@
  261. AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
  262. AR = @AR@
  263. AUTOCONF = @AUTOCONF@
  264. AUTOHEADER = @AUTOHEADER@
  265. AUTOMAKE = @AUTOMAKE@
  266. AWK = @AWK@
  267. CC = @CC@
  268. CCDEPMODE = @CCDEPMODE@
  269. CFLAGS = @CFLAGS@
  270. CPP = @CPP@
  271. CPPFLAGS = @CPPFLAGS@
  272. CXX = @CXX@
  273. CXXCPP = @CXXCPP@
  274. CXXDEPMODE = @CXXDEPMODE@
  275. CXXFLAGS = @CXXFLAGS@
  276. CYGPATH_W = @CYGPATH_W@
  277. DEFS = @DEFS@
  278. DEPDIR = @DEPDIR@
  279. DLLTOOL = @DLLTOOL@
  280. DOXYGEN = @DOXYGEN@
  281. DRM_CFLAGS = @DRM_CFLAGS@
  282. DRM_LIBS = @DRM_LIBS@
  283. DSYMUTIL = @DSYMUTIL@
  284. DUMPBIN = @DUMPBIN@
  285. ECHO_C = @ECHO_C@
  286. ECHO_N = @ECHO_N@
  287. ECHO_T = @ECHO_T@
  288. EGL_CFLAGS = @EGL_CFLAGS@
  289. EGL_LIBS = @EGL_LIBS@
  290. EGREP = @EGREP@
  291. EXEEXT = @EXEEXT@
  292. FGREP = @FGREP@
  293. GLX_CFLAGS = @GLX_CFLAGS@
  294. GLX_LIBS = @GLX_LIBS@
  295. GREP = @GREP@
  296. INSTALL = @INSTALL@
  297. INSTALL_DATA = @INSTALL_DATA@
  298. INSTALL_PROGRAM = @INSTALL_PROGRAM@
  299. INSTALL_SCRIPT = @INSTALL_SCRIPT@
  300. INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  301. LD = @LD@
  302. LDFLAGS = @LDFLAGS@
  303. LIBDRM_VERSION = @LIBDRM_VERSION@
  304. LIBOBJS = @LIBOBJS@
  305. LIBS = @LIBS@
  306. LIBTOOL = @LIBTOOL@
  307. LIBVA_DRIVERS_PATH = @LIBVA_DRIVERS_PATH@
  308. LIBVA_LT_LDFLAGS = @LIBVA_LT_LDFLAGS@
  309. LIBVA_LT_VERSION = @LIBVA_LT_VERSION@
  310. LIBVA_MAJOR_VERSION = @LIBVA_MAJOR_VERSION@
  311. LIBVA_MICRO_VERSION = @LIBVA_MICRO_VERSION@
  312. LIBVA_MINOR_VERSION = @LIBVA_MINOR_VERSION@
  313. LIBVA_VERSION = @LIBVA_VERSION@
  314. LIPO = @LIPO@
  315. LN_S = @LN_S@
  316. LTLIBOBJS = @LTLIBOBJS@
  317. MAKEINFO = @MAKEINFO@
  318. MANIFEST_TOOL = @MANIFEST_TOOL@
  319. MKDIR_P = @MKDIR_P@
  320. NM = @NM@
  321. NMEDIT = @NMEDIT@
  322. OBJDUMP = @OBJDUMP@
  323. OBJEXT = @OBJEXT@
  324. OTOOL = @OTOOL@
  325. OTOOL64 = @OTOOL64@
  326. PACKAGE = @PACKAGE@
  327. PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
  328. PACKAGE_NAME = @PACKAGE_NAME@
  329. PACKAGE_STRING = @PACKAGE_STRING@
  330. PACKAGE_TARNAME = @PACKAGE_TARNAME@
  331. PACKAGE_URL = @PACKAGE_URL@
  332. PACKAGE_VERSION = @PACKAGE_VERSION@
  333. PATH_SEPARATOR = @PATH_SEPARATOR@
  334. PKG_CONFIG = @PKG_CONFIG@
  335. PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
  336. PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
  337. RANLIB = @RANLIB@
  338. SED = @SED@
  339. SET_MAKE = @SET_MAKE@
  340. SHELL = @SHELL@
  341. STRIP = @STRIP@
  342. TODAY = @TODAY@
  343. VA_API_MAJOR_VERSION = @VA_API_MAJOR_VERSION@
  344. VA_API_MICRO_VERSION = @VA_API_MICRO_VERSION@
  345. VA_API_MINOR_VERSION = @VA_API_MINOR_VERSION@
  346. VA_API_VERSION = @VA_API_VERSION@
  347. VERSION = @VERSION@
  348. WAYLAND_API_VERSION = @WAYLAND_API_VERSION@
  349. WAYLAND_CFLAGS = @WAYLAND_CFLAGS@
  350. WAYLAND_LIBS = @WAYLAND_LIBS@
  351. WAYLAND_SCANNER_CFLAGS = @WAYLAND_SCANNER_CFLAGS@
  352. WAYLAND_SCANNER_LIBS = @WAYLAND_SCANNER_LIBS@
  353. X11_CFLAGS = @X11_CFLAGS@
  354. X11_LIBS = @X11_LIBS@
  355. XEXT_CFLAGS = @XEXT_CFLAGS@
  356. XEXT_LIBS = @XEXT_LIBS@
  357. XFIXES_CFLAGS = @XFIXES_CFLAGS@
  358. XFIXES_LIBS = @XFIXES_LIBS@
  359. abs_builddir = @abs_builddir@
  360. abs_srcdir = @abs_srcdir@
  361. abs_top_builddir = @abs_top_builddir@
  362. abs_top_srcdir = @abs_top_srcdir@
  363. ac_ct_AR = @ac_ct_AR@
  364. ac_ct_CC = @ac_ct_CC@
  365. ac_ct_CXX = @ac_ct_CXX@
  366. ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
  367. am__include = @am__include@
  368. am__leading_dot = @am__leading_dot@
  369. am__quote = @am__quote@
  370. am__tar = @am__tar@
  371. am__untar = @am__untar@
  372. bindir = @bindir@
  373. build = @build@
  374. build_alias = @build_alias@
  375. build_cpu = @build_cpu@
  376. build_os = @build_os@
  377. build_vendor = @build_vendor@
  378. builddir = @builddir@
  379. datadir = @datadir@
  380. datarootdir = @datarootdir@
  381. docdir = @docdir@
  382. dvidir = @dvidir@
  383. exec_prefix = @exec_prefix@
  384. host = @host@
  385. host_alias = @host_alias@
  386. host_cpu = @host_cpu@
  387. host_os = @host_os@
  388. host_vendor = @host_vendor@
  389. htmldir = @htmldir@
  390. includedir = @includedir@
  391. infodir = @infodir@
  392. install_sh = @install_sh@
  393. libdir = @libdir@
  394. libexecdir = @libexecdir@
  395. localedir = @localedir@
  396. localstatedir = @localstatedir@
  397. mandir = @mandir@
  398. mkdir_p = @mkdir_p@
  399. oldincludedir = @oldincludedir@
  400. pdfdir = @pdfdir@
  401. pkgconfigdir = @pkgconfigdir@
  402. prefix = @prefix@
  403. program_transform_name = @program_transform_name@
  404. psdir = @psdir@
  405. sbindir = @sbindir@
  406. sharedstatedir = @sharedstatedir@
  407. srcdir = @srcdir@
  408. sysconfdir = @sysconfdir@
  409. target_alias = @target_alias@
  410. top_build_prefix = @top_build_prefix@
  411. top_builddir = @top_builddir@
  412. top_srcdir = @top_srcdir@
  413. wayland_protocoldir = @wayland_protocoldir@
  414. wayland_scanner = @wayland_scanner@
  415. SUBDIRS = protocol
  416. AM_CPPFLAGS = \
  417.         -DLINUX                 \
  418.         -I$(top_srcdir)         \
  419.         -I$(top_srcdir)/va      \
  420.         $(WAYLAND_CFLAGS)       \
  421.         $(DRM_CFLAGS)           \
  422.         $(NULL)
  423.  
  424. source_c = \
  425.         va_wayland.c            \
  426.         va_wayland_drm.c        \
  427.         va_wayland_emgd.c       \
  428.         $(top_srcdir)/va/drm/va_drm_utils.c \
  429.         $(NULL)
  430.  
  431. source_h = \
  432.         va_backend_wayland.h    \
  433.         va_wayland.h            \
  434.         $(NULL)
  435.  
  436. source_h_priv = \
  437.         va_wayland_drm.h        \
  438.         va_wayland_emgd.h       \
  439.         va_wayland_private.h    \
  440.         $(NULL)
  441.  
  442. protocol_source_h = \
  443.         wayland-drm-client-protocol.h   \
  444.         $(NULL)
  445.  
  446. noinst_LTLIBRARIES = libva_wayland.la
  447. libva_waylandincludedir = ${includedir}/va
  448. libva_waylandinclude_HEADERS = $(source_h)
  449. libva_wayland_la_SOURCES = $(source_c) $(protocol_source_h)
  450. noinst_HEADERS = $(source_h_priv)
  451.  
  452. # Extra clean files so that maintainer-clean removes *everything*
  453. MAINTAINERCLEANFILES = Makefile.in
  454. all: all-recursive
  455.  
  456. .SUFFIXES:
  457. .SUFFIXES: .c .lo .o .obj
  458. $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
  459.         @for dep in $?; do \
  460.           case '$(am__configure_deps)' in \
  461.             *$$dep*) \
  462.               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
  463.                 && { if test -f $@; then exit 0; else break; fi; }; \
  464.               exit 1;; \
  465.           esac; \
  466.         done; \
  467.         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu va/wayland/Makefile'; \
  468.         $(am__cd) $(top_srcdir) && \
  469.           $(AUTOMAKE) --gnu va/wayland/Makefile
  470. .PRECIOUS: Makefile
  471. Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
  472.         @case '$?' in \
  473.           *config.status*) \
  474.             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
  475.           *) \
  476.             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
  477.             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
  478.         esac;
  479.  
  480. $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
  481.         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
  482.  
  483. $(top_srcdir)/configure:  $(am__configure_deps)
  484.         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
  485. $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
  486.         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
  487. $(am__aclocal_m4_deps):
  488.  
  489. clean-noinstLTLIBRARIES:
  490.         -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
  491.         @list='$(noinst_LTLIBRARIES)'; \
  492.         locs=`for p in $$list; do echo $$p; done | \
  493.               sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
  494.               sort -u`; \
  495.         test -z "$$locs" || { \
  496.           echo rm -f $${locs}; \
  497.           rm -f $${locs}; \
  498.         }
  499.  
  500. libva_wayland.la: $(libva_wayland_la_OBJECTS) $(libva_wayland_la_DEPENDENCIES) $(EXTRA_libva_wayland_la_DEPENDENCIES)
  501.         $(AM_V_CCLD)$(LINK)  $(libva_wayland_la_OBJECTS) $(libva_wayland_la_LIBADD) $(LIBS)
  502.  
  503. mostlyclean-compile:
  504.         -rm -f *.$(OBJEXT)
  505.  
  506. distclean-compile:
  507.         -rm -f *.tab.c
  508.  
  509. @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/va_drm_utils.Plo@am__quote@
  510. @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/va_wayland.Plo@am__quote@
  511. @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/va_wayland_drm.Plo@am__quote@
  512. @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/va_wayland_emgd.Plo@am__quote@
  513.  
  514. .c.o:
  515. @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
  516. @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
  517. @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
  518. @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
  519. @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
  520.  
  521. .c.obj:
  522. @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
  523. @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
  524. @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
  525. @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
  526. @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
  527.  
  528. .c.lo:
  529. @am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
  530. @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
  531. @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
  532. @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
  533. @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
  534.  
  535. va_drm_utils.lo: $(top_srcdir)/va/drm/va_drm_utils.c
  536. @am__fastdepCC_TRUE@    $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT va_drm_utils.lo -MD -MP -MF $(DEPDIR)/va_drm_utils.Tpo -c -o va_drm_utils.lo `test -f '$(top_srcdir)/va/drm/va_drm_utils.c' || echo '$(srcdir)/'`$(top_srcdir)/va/drm/va_drm_utils.c
  537. @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/va_drm_utils.Tpo $(DEPDIR)/va_drm_utils.Plo
  538. @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$(top_srcdir)/va/drm/va_drm_utils.c' object='va_drm_utils.lo' libtool=yes @AMDEPBACKSLASH@
  539. @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
  540. @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o va_drm_utils.lo `test -f '$(top_srcdir)/va/drm/va_drm_utils.c' || echo '$(srcdir)/'`$(top_srcdir)/va/drm/va_drm_utils.c
  541.  
  542. mostlyclean-libtool:
  543.         -rm -f *.lo
  544.  
  545. clean-libtool:
  546.         -rm -rf .libs _libs
  547. install-libva_waylandincludeHEADERS: $(libva_waylandinclude_HEADERS)
  548.         @$(NORMAL_INSTALL)
  549.         @list='$(libva_waylandinclude_HEADERS)'; test -n "$(libva_waylandincludedir)" || list=; \
  550.         if test -n "$$list"; then \
  551.           echo " $(MKDIR_P) '$(DESTDIR)$(libva_waylandincludedir)'"; \
  552.           $(MKDIR_P) "$(DESTDIR)$(libva_waylandincludedir)" || exit 1; \
  553.         fi; \
  554.         for p in $$list; do \
  555.           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
  556.           echo "$$d$$p"; \
  557.         done | $(am__base_list) | \
  558.         while read files; do \
  559.           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libva_waylandincludedir)'"; \
  560.           $(INSTALL_HEADER) $$files "$(DESTDIR)$(libva_waylandincludedir)" || exit $$?; \
  561.         done
  562.  
  563. uninstall-libva_waylandincludeHEADERS:
  564.         @$(NORMAL_UNINSTALL)
  565.         @list='$(libva_waylandinclude_HEADERS)'; test -n "$(libva_waylandincludedir)" || list=; \
  566.         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
  567.         dir='$(DESTDIR)$(libva_waylandincludedir)'; $(am__uninstall_files_from_dir)
  568.  
  569. # This directory's subdirectories are mostly independent; you can cd
  570. # into them and run 'make' without going through this Makefile.
  571. # To change the values of 'make' variables: instead of editing Makefiles,
  572. # (1) if the variable is set in 'config.status', edit 'config.status'
  573. #     (which will cause the Makefiles to be regenerated when you run 'make');
  574. # (2) otherwise, pass the desired values on the 'make' command line.
  575. $(am__recursive_targets):
  576.         @fail=; \
  577.         if $(am__make_keepgoing); then \
  578.           failcom='fail=yes'; \
  579.         else \
  580.           failcom='exit 1'; \
  581.         fi; \
  582.         dot_seen=no; \
  583.         target=`echo $@ | sed s/-recursive//`; \
  584.         case "$@" in \
  585.           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
  586.           *) list='$(SUBDIRS)' ;; \
  587.         esac; \
  588.         for subdir in $$list; do \
  589.           echo "Making $$target in $$subdir"; \
  590.           if test "$$subdir" = "."; then \
  591.             dot_seen=yes; \
  592.             local_target="$$target-am"; \
  593.           else \
  594.             local_target="$$target"; \
  595.           fi; \
  596.           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
  597.           || eval $$failcom; \
  598.         done; \
  599.         if test "$$dot_seen" = "no"; then \
  600.           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
  601.         fi; test -z "$$fail"
  602.  
  603. ID: $(am__tagged_files)
  604.         $(am__define_uniq_tagged_files); mkid -fID $$unique
  605. tags: tags-recursive
  606. TAGS: tags
  607.  
  608. tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  609.         set x; \
  610.         here=`pwd`; \
  611.         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
  612.           include_option=--etags-include; \
  613.           empty_fix=.; \
  614.         else \
  615.           include_option=--include; \
  616.           empty_fix=; \
  617.         fi; \
  618.         list='$(SUBDIRS)'; for subdir in $$list; do \
  619.           if test "$$subdir" = .; then :; else \
  620.             test ! -f $$subdir/TAGS || \
  621.               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
  622.           fi; \
  623.         done; \
  624.         $(am__define_uniq_tagged_files); \
  625.         shift; \
  626.         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
  627.           test -n "$$unique" || unique=$$empty_fix; \
  628.           if test $$# -gt 0; then \
  629.             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  630.               "$$@" $$unique; \
  631.           else \
  632.             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
  633.               $$unique; \
  634.           fi; \
  635.         fi
  636. ctags: ctags-recursive
  637.  
  638. CTAGS: ctags
  639. ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
  640.         $(am__define_uniq_tagged_files); \
  641.         test -z "$(CTAGS_ARGS)$$unique" \
  642.           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
  643.              $$unique
  644.  
  645. GTAGS:
  646.         here=`$(am__cd) $(top_builddir) && pwd` \
  647.           && $(am__cd) $(top_srcdir) \
  648.           && gtags -i $(GTAGS_ARGS) "$$here"
  649. cscopelist: cscopelist-recursive
  650.  
  651. cscopelist-am: $(am__tagged_files)
  652.         list='$(am__tagged_files)'; \
  653.         case "$(srcdir)" in \
  654.           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
  655.           *) sdir=$(subdir)/$(srcdir) ;; \
  656.         esac; \
  657.         for i in $$list; do \
  658.           if test -f "$$i"; then \
  659.             echo "$(subdir)/$$i"; \
  660.           else \
  661.             echo "$$sdir/$$i"; \
  662.           fi; \
  663.         done >> $(top_builddir)/cscope.files
  664.  
  665. distclean-tags:
  666.         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
  667.  
  668. distdir: $(DISTFILES)
  669.         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  670.         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
  671.         list='$(DISTFILES)'; \
  672.           dist_files=`for file in $$list; do echo $$file; done | \
  673.           sed -e "s|^$$srcdirstrip/||;t" \
  674.               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
  675.         case $$dist_files in \
  676.           */*) $(MKDIR_P) `echo "$$dist_files" | \
  677.                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
  678.                            sort -u` ;; \
  679.         esac; \
  680.         for file in $$dist_files; do \
  681.           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
  682.           if test -d $$d/$$file; then \
  683.             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
  684.             if test -d "$(distdir)/$$file"; then \
  685.               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  686.             fi; \
  687.             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
  688.               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
  689.               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
  690.             fi; \
  691.             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
  692.           else \
  693.             test -f "$(distdir)/$$file" \
  694.             || cp -p $$d/$$file "$(distdir)/$$file" \
  695.             || exit 1; \
  696.           fi; \
  697.         done
  698.         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
  699.           if test "$$subdir" = .; then :; else \
  700.             $(am__make_dryrun) \
  701.               || test -d "$(distdir)/$$subdir" \
  702.               || $(MKDIR_P) "$(distdir)/$$subdir" \
  703.               || exit 1; \
  704.             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
  705.             $(am__relativize); \
  706.             new_distdir=$$reldir; \
  707.             dir1=$$subdir; dir2="$(top_distdir)"; \
  708.             $(am__relativize); \
  709.             new_top_distdir=$$reldir; \
  710.             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
  711.             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
  712.             ($(am__cd) $$subdir && \
  713.               $(MAKE) $(AM_MAKEFLAGS) \
  714.                 top_distdir="$$new_top_distdir" \
  715.                 distdir="$$new_distdir" \
  716.                 am__remove_distdir=: \
  717.                 am__skip_length_check=: \
  718.                 am__skip_mode_fix=: \
  719.                 distdir) \
  720.               || exit 1; \
  721.           fi; \
  722.         done
  723. check-am: all-am
  724. check: check-recursive
  725. all-am: Makefile $(LTLIBRARIES) $(HEADERS)
  726. installdirs: installdirs-recursive
  727. installdirs-am:
  728.         for dir in "$(DESTDIR)$(libva_waylandincludedir)"; do \
  729.           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
  730.         done
  731. install: install-recursive
  732. install-exec: install-exec-recursive
  733. install-data: install-data-recursive
  734. uninstall: uninstall-recursive
  735.  
  736. install-am: all-am
  737.         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
  738.  
  739. installcheck: installcheck-recursive
  740. install-strip:
  741.         if test -z '$(STRIP)'; then \
  742.           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  743.             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  744.               install; \
  745.         else \
  746.           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
  747.             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
  748.             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
  749.         fi
  750. mostlyclean-generic:
  751.  
  752. clean-generic:
  753.  
  754. distclean-generic:
  755.         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
  756.         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
  757.  
  758. maintainer-clean-generic:
  759.         @echo "This command is intended for maintainers to use"
  760.         @echo "it deletes files that may require special tools to rebuild."
  761.         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
  762. clean: clean-recursive
  763.  
  764. clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
  765.         mostlyclean-am
  766.  
  767. distclean: distclean-recursive
  768.         -rm -rf ./$(DEPDIR)
  769.         -rm -f Makefile
  770. distclean-am: clean-am distclean-compile distclean-generic \
  771.         distclean-tags
  772.  
  773. dvi: dvi-recursive
  774.  
  775. dvi-am:
  776.  
  777. html: html-recursive
  778.  
  779. html-am:
  780.  
  781. info: info-recursive
  782.  
  783. info-am:
  784.  
  785. install-data-am: install-libva_waylandincludeHEADERS
  786.  
  787. install-dvi: install-dvi-recursive
  788.  
  789. install-dvi-am:
  790.  
  791. install-exec-am:
  792.  
  793. install-html: install-html-recursive
  794.  
  795. install-html-am:
  796.  
  797. install-info: install-info-recursive
  798.  
  799. install-info-am:
  800.  
  801. install-man:
  802.  
  803. install-pdf: install-pdf-recursive
  804.  
  805. install-pdf-am:
  806.  
  807. install-ps: install-ps-recursive
  808.  
  809. install-ps-am:
  810.  
  811. installcheck-am:
  812.  
  813. maintainer-clean: maintainer-clean-recursive
  814.         -rm -rf ./$(DEPDIR)
  815.         -rm -f Makefile
  816. maintainer-clean-am: distclean-am maintainer-clean-generic
  817.  
  818. mostlyclean: mostlyclean-recursive
  819.  
  820. mostlyclean-am: mostlyclean-compile mostlyclean-generic \
  821.         mostlyclean-libtool
  822.  
  823. pdf: pdf-recursive
  824.  
  825. pdf-am:
  826.  
  827. ps: ps-recursive
  828.  
  829. ps-am:
  830.  
  831. uninstall-am: uninstall-libva_waylandincludeHEADERS
  832.  
  833. .MAKE: $(am__recursive_targets) install-am install-strip
  834.  
  835. .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
  836.         check-am clean clean-generic clean-libtool \
  837.         clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
  838.         distclean-compile distclean-generic distclean-libtool \
  839.         distclean-tags distdir dvi dvi-am html html-am info info-am \
  840.         install install-am install-data install-data-am install-dvi \
  841.         install-dvi-am install-exec install-exec-am install-html \
  842.         install-html-am install-info install-info-am \
  843.         install-libva_waylandincludeHEADERS install-man install-pdf \
  844.         install-pdf-am install-ps install-ps-am install-strip \
  845.         installcheck installcheck-am installdirs installdirs-am \
  846.         maintainer-clean maintainer-clean-generic mostlyclean \
  847.         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
  848.         pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
  849.         uninstall-libva_waylandincludeHEADERS
  850.  
  851.  
  852. # Wayland protocol
  853. va_wayland_drm.c: $(protocol_source_h)
  854. @wayland_scanner_rules@
  855.  
  856. # Tell versions [3.59,3.63) of GNU make to not export all variables.
  857. # Otherwise a system limit (for SysV at least) may be exceeded.
  858. .NOEXPORT:
  859.