Subversion Repositories Kolibri OS

Rev

Blame | Last modification | View Log | RSS feed

  1. /*
  2.   SDL_mixer:  An audio mixer library based on the SDL library
  3.   Copyright (C) 1997-2012 Sam Lantinga <slouken@libsdl.org>
  4.  
  5.   This software is provided 'as-is', without any express or implied
  6.   warranty.  In no event will the authors be held liable for any damages
  7.   arising from the use of this software.
  8.  
  9.   Permission is granted to anyone to use this software for any purpose,
  10.   including commercial applications, and to alter it and redistribute it
  11.   freely, subject to the following restrictions:
  12.  
  13.   1. The origin of this software must not be misrepresented; you must not
  14.      claim that you wrote the original software. If you use this software
  15.      in a product, an acknowledgment in the product documentation would be
  16.      appreciated but is not required.
  17.   2. Altered source versions must be plainly marked as such, and must not be
  18.      misrepresented as being the original software.
  19.   3. This notice may not be removed or altered from any source distribution.
  20.  
  21.   This is the source needed to decode an AIFF file into a waveform.
  22.   It's pretty straightforward once you get going. The only
  23.   externally-callable function is Mix_LoadAIFF_RW(), which is meant to
  24.   act as identically to SDL_LoadWAV_RW() as possible.
  25.  
  26.   This file by Torbjörn Andersson (torbjorn.andersson@eurotime.se)
  27.   8SVX file support added by Marc Le Douarain (mavati@club-internet.fr)
  28.   in december 2002.
  29. */
  30.  
  31. /* $Id$ */
  32.  
  33. #include <stdlib.h>
  34. #include <string.h>
  35.  
  36. #include "SDL_endian.h"
  37. #include "SDL_mixer.h"
  38. #include "load_aiff.h"
  39.  
  40. /*********************************************/
  41. /* Define values for AIFF (IFF audio) format */
  42. /*********************************************/
  43. #define FORM            0x4d524f46              /* "FORM" */
  44.  
  45. #define AIFF            0x46464941              /* "AIFF" */
  46. #define SSND            0x444e5353              /* "SSND" */
  47. #define COMM            0x4d4d4f43              /* "COMM" */
  48.  
  49. #define _8SVX           0x58565338              /* "8SVX" */
  50. #define VHDR            0x52444856              /* "VHDR" */
  51. #define BODY            0x59444F42              /* "BODY" */
  52.  
  53. /* This function was taken from libsndfile. I don't pretend to fully
  54.  * understand it.
  55.  */
  56.  
  57. static Uint32 SANE_to_Uint32 (Uint8 *sanebuf)
  58. {
  59.         /* Is the frequency outside of what we can represent with Uint32? */
  60.         if ( (sanebuf[0] & 0x80) || (sanebuf[0] <= 0x3F) || (sanebuf[0] > 0x40)
  61.                 || (sanebuf[0] == 0x40 && sanebuf[1] > 0x1C) )
  62.                 return 0;
  63.  
  64.         return ((sanebuf[2] << 23) | (sanebuf[3] << 15) | (sanebuf[4] << 7)
  65.                 | (sanebuf[5] >> 1)) >> (29 - sanebuf[1]);
  66. }
  67.  
  68. /* This function is based on SDL_LoadWAV_RW(). */
  69.  
  70. SDL_AudioSpec *Mix_LoadAIFF_RW (SDL_RWops *src, int freesrc,
  71.         SDL_AudioSpec *spec, Uint8 **audio_buf, Uint32 *audio_len)
  72. {
  73.         int was_error;
  74.         int found_SSND;
  75.         int found_COMM;
  76.         int found_VHDR;
  77.         int found_BODY;
  78.         long start = 0;
  79.  
  80.         Uint32 chunk_type;
  81.         Uint32 chunk_length;
  82.         long next_chunk;
  83.  
  84.         /* AIFF magic header */
  85.         Uint32 FORMchunk;
  86.         Uint32 AIFFmagic;
  87.  
  88.         /* SSND chunk */
  89.         Uint32 offset;
  90.         Uint32 blocksize;
  91.  
  92.         /* COMM format chunk */
  93.         Uint16 channels = 0;
  94.         Uint32 numsamples = 0;
  95.         Uint16 samplesize = 0;
  96.         Uint8 sane_freq[10];
  97.         Uint32 frequency = 0;
  98.  
  99.         /* Make sure we are passed a valid data source */
  100.         was_error = 0;
  101.         if ( src == NULL ) {
  102.                 was_error = 1;
  103.                 goto done;
  104.         }
  105.  
  106.         FORMchunk       = SDL_ReadLE32(src);
  107.         chunk_length    = SDL_ReadBE32(src);
  108.         if ( chunk_length == AIFF ) { /* The FORMchunk has already been read */
  109.                 AIFFmagic    = chunk_length;
  110.                 chunk_length = FORMchunk;
  111.                 FORMchunk    = FORM;
  112.         } else {
  113.                 AIFFmagic    = SDL_ReadLE32(src);
  114.         }
  115.         if ( (FORMchunk != FORM) || ( (AIFFmagic != AIFF) && (AIFFmagic != _8SVX) ) ) {
  116.                 SDL_SetError("Unrecognized file type (not AIFF nor 8SVX)");
  117.                 was_error = 1;
  118.                 goto done;
  119.         }
  120.  
  121.         /* TODO: Better santity-checking. */
  122.  
  123.         found_SSND = 0;
  124.         found_COMM = 0;
  125.         found_VHDR = 0;
  126.         found_BODY = 0;
  127.  
  128.         do {
  129.                 chunk_type      = SDL_ReadLE32(src);
  130.                 chunk_length    = SDL_ReadBE32(src);
  131.                 next_chunk      = SDL_RWtell(src) + chunk_length;
  132.                 /* Paranoia to avoid infinite loops */
  133.                 if (chunk_length == 0)
  134.                         break;
  135.  
  136.                 switch (chunk_type) {
  137.                         case SSND:
  138.                                 found_SSND      = 1;
  139.                                 offset          = SDL_ReadBE32(src);
  140.                                 blocksize       = SDL_ReadBE32(src);
  141.                                 start           = SDL_RWtell(src) + offset;
  142.                                 break;
  143.  
  144.                         case COMM:
  145.                                 found_COMM      = 1;
  146.                                 channels        = SDL_ReadBE16(src);
  147.                                 numsamples      = SDL_ReadBE32(src);
  148.                                 samplesize      = SDL_ReadBE16(src);
  149.                                 SDL_RWread(src, sane_freq, sizeof(sane_freq), 1);
  150.                                 frequency       = SANE_to_Uint32(sane_freq);
  151.                                 if (frequency == 0) {
  152.                                         SDL_SetError("Bad AIFF sample frequency");
  153.                                         was_error = 1;
  154.                                         goto done;
  155.                                 }
  156.                                 break;
  157.  
  158.                         case VHDR:
  159.                                 found_VHDR      = 1;
  160.                                 SDL_ReadBE32(src);
  161.                                 SDL_ReadBE32(src);
  162.                                 SDL_ReadBE32(src);
  163.                                 frequency = SDL_ReadBE16(src);
  164.                                 channels = 1;
  165.                                 samplesize = 8;
  166.                                 break;
  167.  
  168.                         case BODY:
  169.                                 found_BODY      = 1;
  170.                                 numsamples      = chunk_length;
  171.                                 start           = SDL_RWtell(src);
  172.                                 break;
  173.  
  174.                         default:
  175.                                 break;
  176.                 }
  177.                 /* a 0 pad byte can be stored for any odd-length chunk */
  178.                 if (chunk_length&1)
  179.                         next_chunk++;
  180.         } while ( ( ( (AIFFmagic == AIFF) && ( !found_SSND || !found_COMM ) )
  181.                   || ( (AIFFmagic == _8SVX ) && ( !found_VHDR || !found_BODY ) ) )
  182.                   && SDL_RWseek(src, next_chunk, RW_SEEK_SET) != 1 );
  183.  
  184.         if ( (AIFFmagic == AIFF) && !found_SSND ) {
  185.                 SDL_SetError("Bad AIFF (no SSND chunk)");
  186.                 was_error = 1;
  187.                 goto done;
  188.         }
  189.  
  190.         if ( (AIFFmagic == AIFF) && !found_COMM ) {
  191.                 SDL_SetError("Bad AIFF (no COMM chunk)");
  192.                 was_error = 1;
  193.                 goto done;
  194.         }
  195.  
  196.         if ( (AIFFmagic == _8SVX) && !found_VHDR ) {
  197.                 SDL_SetError("Bad 8SVX (no VHDR chunk)");
  198.                 was_error = 1;
  199.                 goto done;
  200.         }
  201.  
  202.         if ( (AIFFmagic == _8SVX) && !found_BODY ) {
  203.                 SDL_SetError("Bad 8SVX (no BODY chunk)");
  204.                 was_error = 1;
  205.                 goto done;
  206.         }
  207.  
  208.         /* Decode the audio data format */
  209.         memset(spec, 0, sizeof(*spec));
  210.         spec->freq = frequency;
  211.         switch (samplesize) {
  212.                 case 8:
  213.                         spec->format = AUDIO_S8;
  214.                         break;
  215.                 case 16:
  216.                         spec->format = AUDIO_S16MSB;
  217.                         break;
  218.                 default:
  219.                         SDL_SetError("Unsupported AIFF samplesize");
  220.                         was_error = 1;
  221.                         goto done;
  222.         }
  223.         spec->channels = (Uint8) channels;
  224.         spec->samples = 4096;           /* Good default buffer size */
  225.  
  226.         *audio_len = channels * numsamples * (samplesize / 8);
  227.         *audio_buf = (Uint8 *)SDL_malloc(*audio_len);
  228.         if ( *audio_buf == NULL ) {
  229.                 SDL_SetError("Out of memory");
  230.                 return(NULL);
  231.         }
  232.         SDL_RWseek(src, start, RW_SEEK_SET);
  233.         if ( SDL_RWread(src, *audio_buf, *audio_len, 1) != 1 ) {
  234.                 SDL_SetError("Unable to read audio data");
  235.                 return(NULL);
  236.         }
  237.  
  238.         /* Don't return a buffer that isn't a multiple of samplesize */
  239.         *audio_len &= ~((samplesize / 8) - 1);
  240.  
  241. done:
  242.         if ( freesrc && src ) {
  243.                 SDL_RWclose(src);
  244.         }
  245.         if ( was_error ) {
  246.                 spec = NULL;
  247.         }
  248.         return(spec);
  249. }
  250.  
  251.