;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
;; Distributed under terms of the GNU General Public License ;;
;; ;;
;; IP.INC ;;
;; ;;
;; Part of the tcp/ip network stack for KolibriOS ;;
;; ;;
;; Based on the work of [Johnny_B] and [smb] ;;
;; ;;
;; Written by hidnplayr@kolibrios.org ;;
;; ;;
;; GNU GENERAL PUBLIC LICENSE ;;
;; Version 2, June 1991 ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
$Revision: 922 $
; IP underlying protocols numbers
ETHER_IPv4 equ 0x0008 ; Reversed from 0800 for intel
MAX_FRAGMENTS equ 16
MAX_IP equ MAX_NET_DEVICES
struct IPv4_Packet
.VersionAndIHL db ? ; Version[0-3 bits] and IHL(header length)[4-7 bits]
.TypeOfService db ?
.TotalLength dw ?
.Identification dw ?
.FlagsAndFragmentOffset dw ? ; Flags[0-2] and FragmentOffset[3-15]
.TimeToLive db ? ;
.Protocol db ?
.HeaderChecksum dw ?
.SourceAddress dd ?
.DestinationAddress dd ?
.DataOrOptional:
ends
struct FRAGMENT_slot
.ttl dw ? ; Time to live for this entry, 0 for empty slot's
.id dw ? ; Identification field from IP header
.SrcIP dd ? ; .. from IP header
.DstIP dd ? ; .. from IP header
.ptr dd ? ; Pointer to first packet
.size:
ends
struct FRAGMENT_entry ; This structure will replace the ethernet header in fragmented ip packets
.PrevPtr dd ? ; Pointer to previous fragment entry (-1 for first packet)
.NextPtr dd ? ; Pointer to next fragment entry (-1 for last packet)
.Owner dd ? ; Pointer to structure of driver
rb 2 ; to match ethernet header size
.Data: ; Ip header begins here (we will need the IP header to re-construct the complete packet)
ends
align 4
uglobal
BROADCAST dd ?
IP_LIST rd MAX_IP
SUBNET_LIST rd MAX_IP
DNS_LIST rd MAX_IP
GATEWAY_LIST rd MAX_IP
IP_PACKETS_TX rd MAX_IP
IP_PACKETS_RX rd MAX_IP
FRAGMENT_LIST rb MAX_FRAGMENTS*FRAGMENT_slot.size
endg
;-----------------------------------------------------------------
;
; IPv4_init
;
; This function resets all IP variables
;
; IN: /
; OUT: /
;
;-----------------------------------------------------------------
align 4
IPv4_init:
or eax, -1
mov edi, BROADCAST
mov ecx, 1+4*MAX_IP
rep stosd
xor eax, eax
mov edi, FRAGMENT_LIST
mov ecx, FRAGMENT_slot.size*MAX_FRAGMENTS/4 + 2*MAX_IP
rep stosd
ret
;-----------------------------------------------------------------
;
; IP_Handler:
;
; Called by eth_handler,
; will check if IP Packet isnt damaged
; and call appropriate handler. (TCP/UDP/ICMP/..)
;
; It will also re-construct fragmented packets
;
; IN: Pointer to buffer in [esp]
; size of buffer in [esp+4]
; pointer to device struct in ebx
; pointer to IP Packet data in edx
; OUT: /
;
;-----------------------------------------------------------------
align 4
IPv4_Handler:
DEBUGF 1,"IP_Handler - start\n"
mov cx , [edx + IPv4_Packet.HeaderChecksum]
xchg ch , cl ; Get the checksum in intel format
mov word [edx + IPv4_Packet.HeaderChecksum], 0 ; Clear checksum field to recalculating checksum
movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field
and eax, 0x0000000F ;
shl eax, 2 ;
push edx
stdcall checksum_jb, edx, eax ; buf_ptr, buf_size
pop edx
cmp cx , ax
jnz .dump ; if CHECKSUM isn't valid then dump Packet
mov eax, [edx + IPv4_Packet.DestinationAddress]
mov edi, BROADCAST
mov ecx, MAX_IP+1
repnz scasd
jz .ip_ok
not eax
test eax, 127 shl 24 ; 127.x.x.x
jz .ip_ok
; TODO: we need to check for broadcasts (other then 255.255.255.255)
jmp .dump
.ip_ok:
DEBUGF 1,"IP_Handler - packet from %u.%u.%u.%u\n",\
[edx + IPv4_Packet.SourceAddress]:1,[edx + IPv4_Packet.SourceAddress + 1]:1,[edx + IPv4_Packet.SourceAddress + 2]:1,[edx + IPv4_Packet.SourceAddress + 3]:1
mov al , [edx + IPv4_Packet.VersionAndIHL]
and al , 0x0f ; get IHL(header length)
cmp al , 0x05 ; IHL!= 5*4(20 bytes)
jnz .dump ; TODO: dont dump packets wich have optional fiels !!! /!\
cmp byte [edx + IPv4_Packet.TimeToLive], 0
je .dump
movzx eax, word [edx + IPv4_Packet.FlagsAndFragmentOffset]
xchg al , ah
test ax , 1 shl 13 ; Is 'more fragments' flag set ?
jnz .yes_fragments ; If so, we definately have a fragmented packet
test ax , 0x1fff ; If flag is not set, but there is a fragment offset, the packet is last in series of fragmented packets
jnz .last_fragment
.handle_it: ; We reach here if packet hasnt been fragmented, or when it already has been re-constructed
movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field
and eax, 0x0000000F ;
shl eax, 2 ;
movzx ecx, word [edx + IPv4_Packet.TotalLength] ; Calculate length of encapsulated Packet
xchg cl , ch ;
sub ecx, eax ;
add eax, edx
push eax
mov al , [edx + IPv4_Packet.Protocol]
pop edx ; Offset to data (tcp/udp/icmp/.. Packet)
cmp al , IP_PROTO_TCP
; je TCP_Handler
cmp al , IP_PROTO_UDP
je UDP_Handler
cmp al , IP_PROTO_ICMP
je ICMP_Handler
DEBUGF 1,"IP_Handler - unknown protocol:%u\n",al
.dump:
DEBUGF 1,"IP_Handler - done\n"
; inc [dumped_rx_count]
call kernel_free
add esp, 4 ; pop (balance stack)
ret
.yes_fragments:
shl ax , 3
DEBUGF 1,"Fragmented packet, offset:%u, id:%x\n", ax, [edx + IPv4_Packet.Identification]:4
test ax , ax ; Is this the first packet of the fragment?
jnz .not_first_fragment
DEBUGF 1,"First fragmented packet received!\n"
; try to locate a free slot..
mov ecx, MAX_FRAGMENTS
mov esi, FRAGMENT_LIST
.find_free_slot:
cmp word [esi + FRAGMENT_slot.ttl], 0
je .found_free_slot
add esi, FRAGMENT_slot.size
loop .find_free_slot
jmp .dump ; If no free slot was found, dump the packet
.found_free_slot: ; We found a free slot, let's fill in the FRAGMENT_slot structure
mov word [esi + FRAGMENT_slot.ttl], 15 ; RFC recommends 15 secs as ttl
mov ax , word [edx + IPv4_Packet.Identification]
mov word [esi + FRAGMENT_slot.id], ax
mov eax, dword [edx + IPv4_Packet.SourceAddress]
mov dword [esi + FRAGMENT_slot.SrcIP], eax
mov eax, dword [edx + IPv4_Packet.DestinationAddress]
mov dword [esi + FRAGMENT_slot.DstIP], eax
pop eax
mov dword [esi + FRAGMENT_slot.ptr], eax
; Now, replace ethernet header in original buffer with a FRAGMENT_entry structure
mov [eax + FRAGMENT_entry.NextPtr], -1
mov [eax + FRAGMENT_entry.PrevPtr], -1
mov [eax + FRAGMENT_entry.Owner], ebx
add esp, 4 ; balance stack and exit
ret
.not_first_fragment:
DEBUGF 1,"Middle fragmented packet received!\n"
call .find_fragment_slot
cmp esi, -1
je .dump
mov word [esi + FRAGMENT_slot.ttl], 15 ; Reset the ttl
mov esi, [esi + FRAGMENT_slot.ptr]
or edi, -1
.find_last_entry: ; The following routine will try to find the last entry
cmp edi, [esi + FRAGMENT_entry.PrevPtr]
jne .destroy_slot ; Damn, something screwed up, remove the whole slot (and free buffers too if possible!)
mov edi, esi
mov esi, [esi + FRAGMENT_entry.NextPtr]
cmp esi, -1
jne .find_last_entry
; We found the last entry (pointer is noww in edi)
; We are going to overwrite the ethernet header in received packet with a FRAGMENT_entry structure
pop eax ; pointer to packet
mov [edi + FRAGMENT_entry.NextPtr], eax ; update pointer of previous entry to the new entry
mov [eax + FRAGMENT_entry.NextPtr], -1
mov [eax + FRAGMENT_entry.PrevPtr], edi
mov [eax + FRAGMENT_entry.Owner], ebx
add esp, 4
ret
.last_fragment:
DEBUGF 1,"Last fragmented packet received!\n"
call .find_fragment_slot
cmp esi, -1
je .dump
mov esi, [esi + FRAGMENT_slot.ptr] ; We found the first entry, let's calculate total size of the packet in eax, so we can allocate a buffer
push esi
xor eax, eax ;
or edi, -1
.count_bytes:
cmp [esi + FRAGMENT_entry.PrevPtr], edi
jne .destroy_slot_pop ; Damn, something screwed up, remove the whole slot (and free buffers too if possible!)
mov cx, word [esi + FRAGMENT_entry.Data + IPv4_Packet.TotalLength] ; Add total length
xchg cl, ch
DEBUGF 1,"Packet size: %u\n", cx
add ax, cx
movzx cx, byte [esi + FRAGMENT_entry.Data + IPv4_Packet.VersionAndIHL] ; Sub Header length
and cx, 0x000F
shl cx, 2
DEBUGF 1,"Header size: %u\n", cx
sub ax, cx
mov edi, esi
mov esi, [esi + FRAGMENT_entry.NextPtr]
cmp esi, -1
jne .count_bytes
mov esi, [esp+4] ;;;
mov [edi + FRAGMENT_entry.NextPtr], esi ; Add this packet to the chain, this simplifies the following code
mov [esi + FRAGMENT_entry.NextPtr], -1
mov [esi + FRAGMENT_entry.PrevPtr], edi
mov [esi + FRAGMENT_entry.Owner], ebx
mov cx, [edx + IPv4_Packet.TotalLength] ; Note: This time we dont substract Header length
xchg cl , ch
DEBUGF 1,"Packet size: %u\n", cx
add ax , cx
DEBUGF 1,"Total Received data size: %u\n", eax
push eax
mov ax , [edx + IPv4_Packet.FlagsAndFragmentOffset]
xchg al , ah
shl ax , 3
add cx , ax
pop eax
DEBUGF 1,"Total Fragment size: %u\n", ecx
cmp ax, cx
jne .destroy_slot_pop
push eax
push eax
call kernel_alloc
test eax, eax
je .destroy_slot_pop ; If we dont have enough space to allocate the buffer, discard all packets in slot
mov edx, [esp+4] ; Get pointer to first fragment entry back in edx
.rebuild_packet_loop:
movzx ecx, word [edx + FRAGMENT_entry.Data + IPv4_Packet.FlagsAndFragmentOffset] ; Calculate the fragment offset
xchg cl , ch ; intel byte order
shl cx , 3 ; multiply by 8 and clear first 3 bits
DEBUGF 1,"Fragment offset: %u\n", cx
lea edi, [eax + ecx] ; Notice that edi will be equal to eax for first fragment
movzx ebx, byte [edx + FRAGMENT_entry.Data + IPv4_Packet.VersionAndIHL] ; Find header size (in ebx) of fragment
and bx , 0x000F ;
shl bx , 2 ;
lea esi, [edx + FRAGMENT_entry.Data] ; Set esi to the correct begin of fragment
movzx ecx, word [edx + FRAGMENT_entry.Data + IPv4_Packet.TotalLength] ; Calculate total length of fragment
xchg cl, ch ; intel byte order
cmp edi, eax ; Is this packet the first fragment ?
je .first_fragment
sub cx, bx ; If not, dont copy the header
add esi, ebx ;
.first_fragment:
push cx ; First copy dword-wise, then byte-wise
shr cx, 2 ;
rep movsd ;
pop cx ;
and cx, 3 ;
rep movsb ;
push eax
push edx ; Push pointer to fragment onto stack
mov edx, [edx + FRAGMENT_entry.NextPtr] ; Set edx to the next pointer
call kernel_free ; free the previous fragment buffer (this uses the value from stack)
pop eax
cmp edx, -1 ; Check if it is last fragment in chain
jne .rebuild_packet_loop
pop ecx ;
xchg cl, ch
mov edx, eax
mov word [edx + IPv4_Packet.TotalLength], cx
add esp, 8
xchg cl, ch ; This prints the IP packet to the debug board (usefull when using serial output debug..)
push ecx ;;;;
push eax ;;;;
; mov esi, edx ;
; ;
; @@: ;
; lodsb ;
; DEBUGF 1,"%x ", eax:2 ;
; loop @r ;
movzx eax, byte [edx + IPv4_Packet.VersionAndIHL] ; Calculate Header length by using IHL field
and ax, 0x000F ;
shl ax, 2 ;
sub ecx, eax ;
add eax, edx
push eax
mov al , [edx + IPv4_Packet.Protocol]
pop edx ; Offset to data (tcp/udp/icmp/.. Packet)
; cmp al , PROTOCOL_TCP
; je TCP_Handler
; cmp al , PROTOCOL_UDP
; je UDP_Handler
cmp al , IP_PROTO_ICMP
je ICMP_Handler_fragments
DEBUGF 1,"IP_Handler - unknown protocol:%u\n",al
jmp .dump
.destroy_slot_pop:
add esp, 4
.destroy_slot:
DEBUGF 1,"Destroy fragment slot! MUaHaHAhAHA!\n"
; TODO!
jmp .dump
;-----------------------------------------------------------------
;
; find fragment slot
;
; IN: pointer to fragmented packet in edx ; TODO: the RFC says we should check protocol too
; OUT: pointer to slot in edi, -1 on error
;
;-----------------------------------------------------------------
.find_fragment_slot:
push eax ebx ecx edx
mov ax , word [edx + IPv4_Packet.Identification]
mov ecx, MAX_FRAGMENTS
mov esi, FRAGMENT_LIST
mov ebx, dword [edx + IPv4_Packet.SourceAddress]
mov edx, dword [edx + IPv4_Packet.DestinationAddress]
.find_slot:
cmp word [esi + FRAGMENT_slot.id], ax
jne .try_next
cmp dword [esi + FRAGMENT_slot.SrcIP], ebx
jne .try_next
cmp dword [esi + FRAGMENT_slot.DstIP], edx
je .found_slot
.try_next:
add esi, FRAGMENT_slot.size
loop .find_slot
; pop edx ebx
or esi, -1
; ret
.found_slot:
pop edx ecx ebx eax
ret
;-----------------------------------------------------------------
;
; Decrease TimeToLive of all fragment slots
;
; IN: /
; OUT: /
;
;-----------------------------------------------------------------
align 4
IPv4_decrease_fragment_ttls:
mov esi, FRAGMENT_LIST
mov ecx, MAX_FRAGMENTS
.loop:
cmp [esi + FRAGMENT_slot.ttl], 0
je .try_next
dec [esi + FRAGMENT_slot.ttl]
jnz .try_next
DEBUGF 1,"Fragment slot timed-out!\n"
; TODO: clear all entry's of timed-out slot
.try_next:
add esi, 4
loop .loop
ret
;-----------------------------------------------------------------
;
; Create_IPv4_Packet
;
; IN: eax = dest ip
; ebx = source ip
; ecx = data length
; dx = fragment id
; di = protocol
;
; OUT: eax points to buffer start
; ebx is size of complete buffer
; edi = pointer to start of data (-1 on error)
; ecx = unchanged (packet size of embedded data)
; edx = pointer to device struct (needed for sending procedure)
; esi = pointer to sending procedure
;
;-----------------------------------------------------------------
;;; TODO: create fragmented packets
align 4
IPv4_create_Packet:
DEBUGF 1,"Create IPv4 Packet\n"
cmp ecx, 1514
jg .exit_
cmp eax, -1
je .broadcast ; If it is broadcast, just send
push eax
stdcall arp_table_manager, ARP_TABLE_IP_TO_MAC, eax, temp_dstmac ;opcode,IP,MAC_ptr - Get the MAC address.
cmp eax, ARP_NO_ENTRY
pop eax
jne .send
DEBUGF 1,"Create IPv4 Packet - ARP entry not found!\n"
; TODO: QUEUE!
or edi, -1
ret
.broadcast:
mov dword [temp_dstmac], -1
mov word [temp_dstmac+4], -1
.send:
push ecx eax ebx dx di
call IPv4_dest_to_dev
mov edi, [ETH_DRV_LIST + 4*edi]
lea eax, [edi + ETH_DEVICE.mac]
mov ebx, temp_dstmac
mov ecx, [esp+12]
add ecx, IPv4_Packet.DataOrOptional
mov di , ETHER_IPv4
call ETH_create_Packet ; TODO: figure out a way to make this work with other protocols too
cmp edi, -1
je .exit
mov [edi + IPv4_Packet.VersionAndIHL], 0x45 ; IPv4, normal length (no Optional header)
mov [edi + IPv4_Packet.TypeOfService], 0
xchg ch, cl
mov [edi + IPv4_Packet.TotalLength], cx
mov [edi + IPv4_Packet.FlagsAndFragmentOffset], 0x0000
mov [edi + IPv4_Packet.TimeToLive], 128
mov [edi + IPv4_Packet.HeaderChecksum], 0
pop cx
mov [edi + IPv4_Packet.Protocol], cl
pop cx
mov [edi + IPv4_Packet.Identification], cx
pop ecx
mov [edi + IPv4_Packet.SourceAddress], ecx
pop ecx
mov [edi + IPv4_Packet.DestinationAddress], ecx
push eax
stdcall checksum_jb, edi, IPv4_Packet.DataOrOptional ; buf_ptr, buf_size
xchg al, ah
mov [edi + IPv4_Packet.HeaderChecksum], ax
pop eax ecx
add edi, IPv4_Packet.DataOrOptional
DEBUGF 1,"IPv4 Packet for device %x created successfully\n", edx
ret
.exit:
add esp, 16
.exit_:
or edi, -1
ret
uglobal
temp_dstmac dp ?
endg
;---------------------------------------------------------------------------
;
; IPv4_dest_to_dev
;
; IN: Destination IP in eax
; OUT: device id in edi
;
;---------------------------------------------------------------------------
align 4
IPv4_dest_to_dev:
DEBUGF 1,"IPv4 destination to device: "
xor edi, edi
mov ecx, MAX_IP
.loop:
mov ebx, [IP_LIST+edi] ; we dont need to worry about non exisiting ip interfaces
and ebx, [SUBNET_LIST+edi] ; they have IP and SUBNET set to all one's, so they will have no match except 255.255.255.255
; (only a moron would insert that ip into this function..)
mov edx, eax
and edx, [SUBNET_LIST+edi]
cmp ebx, edx
je .found_it
add edi, 4
loop .loop
xor edi, edi ; if none found, use device 0 as default device
.found_it:
shr edi, 2
DEBUGF 1,"%u\n",edi
ret
;---------------------------------------------------------------------------
;
; IPv4_get_frgmnt_num
;
; IN: /
; OUT: fragment number in ax
;
;---------------------------------------------------------------------------
align 4
IPv4_get_frgmnt_num:
xor ax, ax ;;; TODO: replace this with real code
ret
;---------------------------------------------------------------------------
;
; IPv4_API
;
; This function is called by system function 75
;
; IN: subfunction number in bl
; device number in bh
; ecx, edx, .. depends on subfunction
;
; OUT:
;
;---------------------------------------------------------------------------
align 4
IPv4_API:
movzx eax, bh
shl eax, 2
test bl, bl
jz .packets_tx ; 0
dec bl
jz .packets_rx ; 1
dec bl
jz .read_ip ; 2
dec bl
jz .write_ip ; 3
dec bl
jz .read_dns ; 4
dec bl
jz .write_dns ; 5
dec bl
jz .read_subnet ; 6
dec bl
jz .write_subnet ; 7
dec bl
jz .read_gateway ; 8
dec bl
jz .write_gateway ; 9
.error:
mov eax, -1
ret
.packets_tx:
add eax, IP_PACKETS_TX
mov eax, [eax]
ret
.packets_rx:
add eax, IP_PACKETS_RX
mov eax, [eax]
ret
.read_ip:
add eax, IP_LIST
mov eax, [eax]
ret
.write_ip:
add eax, IP_LIST
mov [eax], ecx
xor eax, eax
ret
.read_dns:
add eax, DNS_LIST
mov eax, [eax]
ret
.write_dns:
add eax, DNS_LIST
mov [eax], ecx
xor eax, eax
ret
.read_subnet:
add eax, SUBNET_LIST
mov eax, [eax]
ret
.write_subnet:
add eax, SUBNET_LIST
mov [eax], ecx
xor eax, eax
ret
.read_gateway:
add eax, GATEWAY_LIST
mov eax, [eax]
ret
.write_gateway:
add eax, GATEWAY_LIST
mov [eax], ecx
xor eax, eax
ret