include 'macros.inc'
MEOS_APP_START
type_ethernet equ 1
CODE
call draw_window
still: mcall 10 ; wait here for event
dec eax ; redraw request ?
jz red
dec eax ; key in buffer ?
jz key
dec eax ; button in buffer ?
jz button
jmp still
red: ; redraw
mcall 9, Proc_Info, -1 ; window redraw requested so get new window coordinates and size
mov eax, [Proc_Info.box.left]; store the window coordinates into the Form Structure
mov [Form + 2], ax ; x start position
mov eax, [Proc_Info.box.top];
mov [Form + 6], ax ; ystart position
mov eax, [Proc_Info.box.width] ;
mov [Form], ax ; window width
mov eax, [Proc_Info.box.height] ;
mov [Form + 4] ,ax ; window height
call draw_window ; go redraw window now
jmp still
key: ; key
mcall 2 ; just read it and ignore
jmp still
button: ; button
mcall 17 ; get id
cmp ah, 1 ; button id = 1 ?
jne @f
mcall -1 ; close this program
@@:
cmp eax,0x0000fe00
jg @f
cmp ah, 4
je hook
jmp still
@@:
shr eax, 16
mov dword[MAC],0
mov word [MAC+4],0
mov word [selected], ax
call load_drv
call draw_window
jmp still
load_drv:
; mov ax , [selected]
test ax , ax
jz still
mov bl , 6 ; get a dword
mov bh , ah ; bus
mov ch , al ; dev
mov cl , 0 ; offset to device/vendor id
mcall 62 ; get ID's
mov word [PCI_Vendor], ax
shr eax, 16
mov word [PCI_Device], ax
call get_drv_ptr
mov ecx, eax
mcall 68, 16
mov [IOCTL.handle], eax
ret
hook:
mov ax , [selected]
test ax , ax
jz still
mov [hardwareinfo.pci_dev], al
mov [hardwareinfo.pci_bus], ah
mov [IOCTL.io_code], 1 ; SRV_HOOK
mov [IOCTL.inp_size], 3
mov [IOCTL.input], hardwareinfo
mov [IOCTL.out_size], 0
mov [IOCTL.output], 0
mcall 68, 17, IOCTL
mov byte[drivernumber], al
printhdwaddr:
call draw_window
jmp still
draw_window:
mcall 12, 1 ; start of draw
mcall 0, dword [Form], dword [Form + 4], 0x13ffffff, 0x805080d0, title
mcall 73, 0
mov ecx, eax
mcall 47, 1 shl 18, , 50 shl 16 + 10, 0x00000000
call Get_PCI_Info ; get pci version and last bus, scan for and draw each pci device
cmp edx, 20 shl 16 + 110
je .nonefound
mcall 4, 20 shl 16 + 100, 1 shl 31 + 0x00000000 , caption
mcall 8, 122 shl 16 + 100, 50 shl 16 + 18, 0x00000004, 0x00007f00
mcall ,, 70 shl 16 + 18, 0x00000005, 0x007f0000
mcall 4, 137 shl 16 + 57, 1 shl 31 + 0x00ffffff , btn_start
mcall , 140 shl 16 + 77, , btn_stop
mcall , 240 shl 16 + 77, 1 shl 31 + 0x00000000 , lbl_hdw_addr
mcall , 312 shl 16 + 57, , lbl_type
add ebx, 38 shl 16
cmp byte [type],type_ethernet
jne @f
mcall , , 1 shl 31 + 0x00000000, lbl_ethernet
mcall 8,345 shl 16 + 17, 73 shl 16 + 14, 0x00000006, 0x00aaaa00
mcall ,365 shl 16 + 17, , 0x00000007
mcall ,385 shl 16 + 17, , 0x00000008
mcall ,405 shl 16 + 17, , 0x00000009
mcall ,425 shl 16 + 17, , 0x0000000a
mcall ,445 shl 16 + 17, , 0x0000000b
movzx ecx,byte[MAC]
mcall 47, 1 shl 17 + 1 shl 8,,349 shl 16 + 77, 0x000022cc
movzx ecx,byte[MAC+1]
add edx, 20 shl 16
mcall
movzx ecx,byte[MAC+2]
add edx, 20 shl 16
mcall
movzx ecx,byte[MAC+3]
add edx, 20 shl 16
mcall
movzx ecx,byte[MAC+4]
add edx, 20 shl 16
mcall
movzx ecx,byte[MAC+5]
add edx, 20 shl 16
mcall
jmp .done
@@:
mcall 4, , 1 shl 31 + 0x00ff0000, lbl_unknown
jmp .done
.nonefound :
mcall 4, 20 shl 16 + 30, 1 shl 31 + 0x00ff0000 , nonefound
.done:
mcall 12, 2 ; end of draw
ret
;------------------------------------------------------------------
;* Gets the PCI Version and Last Bus
Get_PCI_Info:
mcall 62, 0
mov word [PCI_Version], ax
mcall 62, 1
mov byte [PCI_LastBus], al
;----------------------------------------------------------
;* Get all devices on PCI Bus
mov edx, 20 shl 16 + 110 ; set start write position
cmp al , 0xff ; 0xFF means no pci bus found
jne Pci_Exists ;
ret ; if no bus then leave
Pci_Exists:
mov byte [V_Bus], 0 ; reset varibles
mov byte [V_Dev], 0 ;
Start_Enum:
mov bl , 6 ; get a dword
mov bh , byte [V_Bus] ; bus of pci device
mov ch , byte [V_Dev] ; device number/function
mov cl , 0 ; offset to device/vendor id
mcall 62 ; get ID's
cmp ax, 0 ; Vendor ID should not be 0 or 0xFFFF
je nextDev ; check next device if nothing exists here
cmp ax, 0xffff ;
je nextDev ;
mov word [PCI_Vendor], ax ; There is a device here, save the ID's
shr eax, 16 ;
mov word [PCI_Device], ax ;
mov bl , 4 ; Read config byte
mov bh , byte [V_Bus] ; Bus #
mov ch , byte [V_Dev] ; Device # on bus
mov cl , 0x08 ; Register to read (Get Revision)
mcall 62 ; Read it
mov byte [PCI_Rev], al ; Save it
mov cl , 0x0b ; Register to read (Get class)
mcall 62 ; Read it
mov byte [PCI_Class], al ; Save it
mov cl , 0x0a ; Register to read (Get Subclass)
mcall 62 ; Read it
mov byte [PCI_SubClass], al ; Save it
mov cl , 0x09 ; Register to read (Get Interface)
mcall 62 ; Read it
mov [PCI_Interface], al ; Save it
mov cl , 0x3c ; Register to read (Get IRQ)
@@: mcall 62 ; Read it
mov [PCI_IRQ], al ; Save it
;
; inc byte [total] ; one more device found
cmp byte [PCI_Class],2
jne nextDev
call Print_New_Device ; print device info to screen
nextDev:
add byte [V_Dev], 8 ; lower 3 bits are the function number
jnz Start_Enum ; jump until we reach zero
mov byte [V_Dev], 0 ; reset device number
inc byte [V_Bus] ; next bus
mov al , byte [PCI_LastBus] ; get last bus
cmp byte [V_Bus], al ; was it last bus
jbe Start_Enum ; if not jump to keep searching
ret
;------------------------------------------------------------------
;* Print device info to screen
Print_New_Device:
push edx ; Magic ! (to print a button...)
mov ebx, 18 shl 16
mov bx , [Form]
sub bx , 36
mov cx , dx
dec cx
shl ecx, 16
add ecx, 9
movzx edx, byte [V_Bus]
shl dx , 8
mov dl , byte [V_Dev]
mov esi, 0x0000c0ff ; color: yellow if selected, blue otherwise
cmp word [selected], dx
jne @f
mov esi, 0x00c0c000
@@:
shl edx, 8
or dl , 0xff
mcall 8
pop edx
xor esi, esi ; Color of text
movzx ecx, word [PCI_Vendor] ; number to be written
mcall 47, 0x00040100 ; Write Vendor ID
add edx, (4*6+18) shl 16
movzx ecx, word [PCI_Device] ; get Vendor ID
mcall ; Draw Vendor ID to Window
add edx, (4*6+18) shl 16
movzx ecx, byte [V_Bus] ; get bus number
mcall ,0x00020100 ; draw bus number to screen
add edx, (2*6+18) shl 16
movzx ecx, byte [V_Dev] ; get device number
shr ecx, 3 ; device number is bits 3-7
mcall ; Draw device Number To Window
add edx, (2*6+18) shl 16
movzx ecx, byte [PCI_Rev] ; get revision number
mcall ; Draw Revision to screen
add edx, (2*6+18) shl 16
movzx ecx, [PCI_IRQ]
cmp cl , 0x0f ; IRQ must be between 0 and 15
ja @f
mcall
@@:
;
;Write Names
movzx ebx, dx ; Set y position
or ebx, 230 shl 16 ; set Xposition
;------------------------------------------------------------------
; Prints the Vendor's Name based on Vendor ID
;------------------------------------------------------------------
mov edx, VendorsTab
mov cx , word[PCI_Vendor]
.fn: mov ax , [edx]
add edx, 6
test ax , ax
jz .find
cmp ax , cx
jne .fn
.find: mov edx, [edx - 4]
mcall 4,, 0x80000000 ; lets print the vendor Name
;------------------------------------------------------------------
; Get description based on Class/Subclass
;------------------------------------------------------------------
mov eax, dword [PCI_Class]
and eax, 0xffffff
xor edx, edx
xor esi, esi
.fnc: inc esi
mov ecx, [Classes + esi * 8 - 8]
cmp cx , 0xffff
je .endfc
cmp cx , ax
jne .fnc
test ecx, 0xff000000
jz @f
mov edx, [Classes + esi * 8 - 4]
jmp .fnc
@@: cmp eax, ecx
jne .fnc
xor edx, edx
.endfc: test edx, edx
jnz @f
mov edx, [Classes + esi * 8 - 4]
@@:
add ebx, 288 shl 16
mcall 4,, 0x80000000,, 32 ; draw the text
movzx edx, bx ; get y coordinate
add edx, 0x0014000A ; add 10 to y coordinate and set x coordinate to 20
;------------------------------------------------------------------
; Print Driver Name
;------------------------------------------------------------------
push edx
add ebx, 120 shl 16
push ebx
call get_drv_ptr
mov edx, eax
pop ebx
mcall 4,,0x80000000 ; lets print the vendor Name
pop edx
ret
get_drv_ptr:
mov eax, driverlist ; eax will be the pointer to latest driver title
mov ebx, driverlist ; ebx is the current pointer
mov ecx, dword[PCI_Vendor] ; the device/vendor id of we want to find
driverloop:
inc ebx
cmp byte[ebx],0
jne driverloop
inc ebx ; the device/vendor id list for the driver eax is pointing to starts here.
deviceloop:
cmp dword[ebx],0
je nextdriver
cmp dword[ebx],ecx
je driverfound
add ebx,4
jmp deviceloop
nextdriver:
add ebx,4
cmp dword[ebx],0
je nodriver
mov eax,ebx
jmp driverloop
nodriver:
mov eax, lbl_none ; lets print the vendor Name
ret
driverfound:
ret
include 'VENDORS.INC'
include 'DRIVERS.INC'
;------------------------------------------------------------------
; DATA AREA
DATA
Form: dw 800 ; window width (no more, special for 800x600)
dw 100 ; window x start
dw 220 ; window height
dw 100 ; window y start
title db 'Network Driver Control Center', 0
caption db 'Vendor Device Bus Dev Rev IRQ Company Description DRIVER',0
lbl_1 db 'Hardware control',0
nonefound db 'No compatible devices were found!',0
btn_start db 'Start driver',0
btn_stop db 'Stop driver',0
lbl_hdw_addr db 'hardware address:',0
lbl_type db 'type:',0
lbl_none db 'none',0
lbl_unknown db 'unknown',0
lbl_ethernet db 'ethernet',0
IOCTL:
.handle dd ?
.io_code dd ?
.input dd ?
.inp_size dd ?
.output dd ?
.out_size dd ?
drivernumber db ?
MAC dp ?
hardwareinfo:
.type db 1 ; pci
.pci_bus db ?
.pci_dev db ?
;------------------------------------------------------------------
; UNINITIALIZED DATA AREA
UDATA
type db ?
selected dw ?
V_Bus db ?
V_Dev db ?
PCI_Version dw ?
PCI_LastBus db ?
PCI_Vendor dw ?
PCI_Device dw ?
PCI_Bus db ?
PCI_Dev db ?
PCI_Rev db ?
; don`t change order!!!
PCI_Class db ?
PCI_SubClass db ?
PCI_Interface db ?
PCI_IRQ db ?
Proc_Info process_information
MEOS_APP_END