Rev 713 | Go to most recent revision | Only display areas with differences | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed
Rev 713 | Rev 715 | ||
---|---|---|---|
1 | ;====================================================================== |
1 | ;====================================================================== |
2 | ; |
2 | ; |
3 | ; BOOT DATA |
3 | ; BOOT DATA |
4 | ; |
4 | ; |
5 | ;====================================================================== |
5 | ;====================================================================== |
6 | 6 | ||
7 | $Revision: 713 $ |
7 | $Revision: 715 $ |
8 | 8 | ||
9 | 9 | ||
10 | d80x25_bottom: |
10 | d80x25_bottom: |
11 | db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
11 | db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
12 | db 'NO WARRANTY ',186 |
12 | db 'NO WARRANTY ',186 |
13 | db 186,' See file COPYING for details ' |
13 | db 186,' See file COPYING for details ' |
14 | db ' ',186 |
14 | db ' ',186 |
15 | line_full_bottom |
15 | line_full_bottom |
16 | d80x25_bottom_num = 3 |
16 | d80x25_bottom_num = 3 |
17 | - | ||
18 | novesa db "Display: EGA/CGA",13,10,0 |
- | |
19 | vervesa db "Version of Vesa: Vesa x.x",13,10,0 |
- | |
20 | vervesa_off=22 |
17 | |
21 | msg_apm db " APM x.x ", 0 |
18 | msg_apm db " APM x.x ", 0 |
22 | gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
19 | vervesa db "Version of Vesa: Vesa x.x",13,10,0 |
23 | db "[3] 1024x768, [4] 1280x1024",13,10 |
20 | novesa db "Display: EGA/CGA",13,10,0 |
24 | db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
21 | s_vesa db "Version of VESA: " |
- | 22 | .ver db "?.?",13,10,0 |
|
25 | db "[7] 1024x768, [8] 1280x1024",13,10 |
23 | |
26 | db 186," EGA/CGA 256 Colors: [9] 320x200, " |
24 | gr_mode db "You will choose a video of mode: ",13,10,0 |
27 | db "VGA 16 Colors: [0] 640x480",13,10 |
25 | ;s_bpp db 13,10,186," «ã¡¨ 梥â : " |
28 | db 186," Select mode: ",0 |
- | |
29 | bt24 db "Bits Per Pixel: 24",13,10,0 |
26 | ; .bpp dw "??" |
- | 27 | ; db 13,10,0 |
|
30 | bt32 db "Bits Per Pixel: 32",13,10,0 |
28 | |
31 | vrrmprint db "Apply VRR? (picture frequency greater than 60Hz" |
29 | vrrmprint db "Apply VRR? (picture frequency greater than 60Hz" |
32 | db " only for transfers:",13,10 |
30 | db " only for transfers:",13,10 |
33 | db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0 |
31 | db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0 |
34 | ;askmouse db " Mouse at:" |
- | |
35 | ; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
- | |
36 | ; db " Select port [1-3]: ",0 |
- | |
37 | ;no_com1 db 13,10,186, " No COM1 mouse",0 |
- | |
38 | ;no_com2 db 13,10,186, " No COM2 mouse",0 |
- | |
39 | ;ask_dma db "Use DMA for HDD access? [1-yes, 2-only for reading, 3-no]: ",0 |
- | |
- | 32 | ||
- | 33 | ||
40 | ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0 |
34 | ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0 |
41 | ;gr_direct db 186," Use direct LFB writing? " |
- | |
42 | ; db "[1-yes/2-no] ? ",0 |
- | |
43 | ;mem_model db 13,10,186," Motherboard memory [1-16 Mb / 2-32 Mb / " |
- | |
44 | ; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
- | |
45 | ;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
- | |
- | 35 | ||
46 | bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);" |
36 | bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);" |
47 | db 13,10,186," " |
37 | db 13,10,186," " |
48 | db "3-use preloaded ram-image from kernel restart;" |
38 | db "3-use preloaded ram-image from kernel restart;" |
49 | db 13,10,186," " |
39 | db 13,10,186," " |
50 | db "4-create blank image]: ",0 |
40 | db "4-create blank image]: ",0 |
51 | probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, " |
41 | probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, " |
52 | db "2-probe bios (Vesa 3.0)]: ",0 |
42 | db "2-probe bios (Vesa 3.0)]: ",0 |
53 | ;memokz256 db 13,10,186," RAM 256 Mb",0 |
43 | ;memokz256 db 13,10,186," RAM 256 Mb",0 |
54 | ;memokz128 db 13,10,186," RAM 128 Mb",0 |
44 | ;memokz128 db 13,10,186," RAM 128 Mb",0 |
55 | ;memokz64 db 13,10,186," RAM 64 Mb",0 |
45 | ;memokz64 db 13,10,186," RAM 64 Mb",0 |
56 | ;memokz32 db 13,10,186," RAM 32 Mb",0 |
46 | ;memokz32 db 13,10,186," RAM 32 Mb",0 |
57 | ;memokz16 db 13,10,186," RAM 16 Mb",0 |
47 | ;memokz16 db 13,10,186," RAM 16 Mb",0 |
58 | prnotfnd db "Fatal - Videomode not found.",0 |
48 | prnotfnd db "Fatal - Videomode not found.",0 |
59 | ;modena db "Fatal - VBE 0x112+ required.",0 |
49 | ;modena db "Fatal - VBE 0x112+ required.",0 |
60 | not386 db "Fatal - CPU 386+ required.",0 |
50 | not386 db "Fatal - CPU 386+ required.",0 |
61 | btns db "Fatal - Can't determine color depth.",0 |
51 | btns db "Fatal - Can't determine color depth.",0 |
62 | fatalsel db "Fatal - Graphics mode not supported by hardware.",0 |
52 | fatalsel db "Fatal - Graphics mode not supported by hardware.",0 |
- | 53 | pres_key db "Press any key to choose a new video of mode.",0 |
|
63 | badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0 |
54 | badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0 |
64 | memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0 |
55 | memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0 |
65 | okt db " ... OK" |
56 | okt db " ... OK" |
66 | linef db 13,10,0 |
57 | linef db 13,10,0 |
67 | diskload db "Loading diskette: 00 %",8,8,8,8,0 |
58 | diskload db "Loading diskette: 00 %",8,8,8,8,0 |
68 | pros db "00" |
59 | pros db "00" |
69 | backspace2 db 8,8,0 |
60 | backspace2 db 8,8,0 |
70 | boot_dev db 0 ; 0=floppy, 1=hd |
61 | boot_dev db 0 ; 0=floppy, 1=hd |
71 | start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0 |
62 | start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0 |
72 | time_msg db " or wait " |
63 | time_msg db " or wait " |
73 | time_str db " 5 seconds" |
64 | time_str db " 5 seconds" |
74 | db " before automatical continuation",13,10,0 |
65 | db " before automatical continuation",13,10,0 |
75 | current_cfg_msg db "Current settings:",13,10,0 |
66 | current_cfg_msg db "Current settings:",13,10,0 |
76 | curvideo_msg db " [a] Videomode: ",0 |
67 | curvideo_msg db " [a] Videomode: ",0 |
77 | mode1 db "640x480",0 |
- | |
78 | mode2 db "800x600",0 |
- | |
79 | mode3 db "1024x768",0 |
- | |
80 | mode4 db "1280x1024",0 |
- | |
- | 68 | ||
81 | modes_msg dw mode4,mode1,mode2,mode3 |
69 | ;modes_msg dw mode4,mode1,mode2,mode3 |
82 | modevesa20 db " with LFB",0 |
70 | ;modevesa20 db " with LFB",0 |
83 | modevesa12 db ", VESA 1.2 Bnk",0 |
71 | ;modevesa12 db ", VESA 1.2 Bnk",0 |
84 | mode9 db "320x200, EGA/CGA 256 colors",0 |
72 | mode0 db "320x200, EGA/CGA 256 colors",13,10,0 |
85 | mode10 db "640x480, VGA 16 colors",0 |
73 | mode9 db "640x480, VGA 16 colors",13,10,0 |
- | 74 | ||
86 | probeno_msg db " (standard mode)",0 |
75 | ;probeno_msg db " (standard mode)",0 |
87 | probeok_msg db " (check nonstandard modes)",0 |
76 | ;probeok_msg db " (check nonstandard modes)",0 |
88 | ;dma_msg db " [b] Use DMA for HDD access:",0 |
77 | ;dma_msg db " [b] Use DMA for HDD access:",0 |
89 | usebd_msg db " [b] Add disks visible by BIOS:",0 |
78 | usebd_msg db " [b] Add disks visible by BIOS:",0 |
90 | on_msg db " on",13,10,0 |
79 | on_msg db " on",13,10,0 |
91 | off_msg db " off",13,10,0 |
80 | off_msg db " off",13,10,0 |
92 | ;readonly_msg db " only for reading",13,10,0 |
81 | ;readonly_msg db " only for reading",13,10,0 |
93 | vrrm_msg db " [c] Use VRR:",0 |
82 | vrrm_msg db " [c] Use VRR:",0 |
94 | preboot_device_msg db " [d] Floppy image: ",0 |
83 | preboot_device_msg db " [d] Floppy image: ",0 |
95 | preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
84 | preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
96 | pdm1 db "real floppy",13,10,0 |
85 | pdm1 db "real floppy",13,10,0 |
97 | pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
86 | pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
98 | pdm3 db "use already loaded image",13,10,0 |
87 | pdm3 db "use already loaded image",13,10,0 |
99 | pdm4 db "create blank image",13,10,0 |
88 | pdm4 db "create blank image",13,10,0 |
100 | loading_msg db "Loading KolibriOS...",0 |
89 | loading_msg db "Loading KolibriOS...",0 |
101 | save_quest db "Remember current settings? [y/n]: ",0 |
90 | save_quest db "Remember current settings? [y/n]: ",0 |
102 | loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0 |
91 | loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0 |
103 | 92 | ||
104 | _st db 186,' ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ¿',13,10,0 |
93 | _st db 186,' ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ¿',13,10,0 |
105 | _r1 db 186,' ³ 320x200 EGA/CGA 256 colors ³Û³',13,10,0 |
94 | _r1 db 186,' ³ 320x200 EGA/CGA 256 colors ³Û³',13,10,0 |
106 | _r2 db 186,' ³ 640x480 VGA 16 colors ³Û³',13,10,0 |
95 | _r2 db 186,' ³ 640x480 VGA 16 colors ³Û³',13,10,0 |
107 | _rs db 186,' ³ ????x????@?? SVGA VESA ³Û³',13,10,0 |
96 | _rs db 186,' ³ ????x????@?? SVGA VESA ³Û³',13,10,0 |
108 | _bt db 186,' ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÙ',13,10,0 |
97 | _bt db 186,' ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÙ',13,10,0 |