Rev 4470 | Rev 4582 | Go to most recent revision | Show entire file | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed
Rev 4470 | Rev 4581 | ||
---|---|---|---|
Line 19... | Line 19... | ||
19 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
19 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
Line 20... | Line 20... | ||
20 | 20 | ||
Line 21... | Line 21... | ||
21 | ; TODO: use separate descriptors in memory instead of placing them in front of packets! |
21 | ; TODO: use separate descriptors in memory instead of placing them in front of packets! |
- | 22 | ||
Line 22... | Line 23... | ||
22 | 23 | ||
23 | 24 | format PE DLL native |
|
- | 25 | entry START |
|
Line 24... | Line 26... | ||
24 | format MS COFF |
26 | |
Line 25... | Line 27... | ||
25 | 27 | CURRENT_API = 0x0200 |
|
26 | API_VERSION = 0x01000100 |
28 | COMPATIBLE_API = 0x0100 |
27 | DRIVER_VERSION = 5 |
29 | API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
Line -... | Line 30... | ||
- | 30 | ||
- | 31 | MAX_DEVICES = 16 |
|
- | 32 | ||
28 | 33 | DEBUG = 1 |
|
29 | MAX_DEVICES = 16 |
34 | __DEBUG__ = 1 |
30 | - | ||
31 | DEBUG = 1 |
- | |
32 | __DEBUG__ = 1 |
35 | __DEBUG_LEVEL__ = 1 ; 1 = verbose, 2 = errors only |
33 | __DEBUG_LEVEL__ = 2 ; 1 = verbose, 2 = errors only |
36 | |
34 | - | ||
35 | include '../struct.inc' |
- | |
36 | include '../macros.inc' |
- | |
37 | include '../proc32.inc' |
- | |
38 | include '../imports.inc' |
- | |
39 | include '../fdo.inc' |
- | |
40 | include '../netdrv.inc' |
- | |
41 | - | ||
42 | public START |
- | |
43 | public service_proc |
- | |
44 | public version |
- | |
45 | - | ||
46 | virtual at ebx |
- | |
47 | - | ||
48 | device: |
- | |
49 | - | ||
50 | ETH_DEVICE |
- | |
51 | - | ||
52 | .io_addr dd ? |
- | |
53 | .pci_bus dd ? |
- | |
54 | .pci_dev dd ? |
- | |
55 | .irq_line db ? |
- | |
56 | - | ||
57 | .rx_desc dd ? |
- | |
58 | - | ||
59 | .ee_bus_width db ? |
- | |
60 | - | ||
61 | rb 0x100 - (($ - device) and 0xff) |
- | |
62 | - | ||
63 | txfd: |
- | |
64 | .status dw ? |
- | |
65 | .command dw ? |
- | |
66 | .link dd ? |
- | |
67 | .tx_desc_addr dd ? |
- | |
68 | .count dd ? |
- | |
69 | - | ||
70 | .tx_buf_addr0 dd ? |
- | |
71 | .tx_buf_size0 dd ? |
- | |
72 | - | ||
73 | rb 0x100 - (($ - device) and 0xff) |
- | |
74 | - | ||
75 | confcmd: |
- | |
76 | .status dw ? |
- | |
77 | .command dw ? |
- | |
78 | .link dd ? |
- | |
79 | .data rb 64 |
- | |
80 | - | ||
81 | rb 0x100 - (($ - device) and 0xff) |
- | |
82 | - | ||
83 | lstats: |
- | |
84 | tx_good_frames dd ? |
- | |
85 | tx_coll16_errs dd ? |
- | |
86 | tx_late_colls dd ? |
- | |
87 | tx_underruns dd ? |
- | |
88 | tx_lost_carrier dd ? |
- | |
89 | tx_deferred dd ? |
- | |
90 | tx_one_colls dd ? |
- | |
91 | tx_multi_colls dd ? |
- | |
92 | tx_total_colls dd ? |
- | |
93 | - | ||
94 | rx_good_frames dd ? |
- | |
95 | rx_crc_errs dd ? |
- | |
96 | rx_align_errs dd ? |
- | |
97 | rx_resource_errs dd ? |
- | |
98 | rx_overrun_errs dd ? |
- | |
99 | rx_colls_errs dd ? |
- | |
100 | rx_runt_errs dd ? |
- | |
101 | - | ||
102 | last_tx_buffer dd ? ;;; fixme |
- | |
103 | - | ||
104 | sizeof.device_struct = $ - device |
- | |
105 | - | ||
106 | end virtual |
- | |
107 | - | ||
108 | - | ||
109 | virtual at 0 |
- | |
110 | - | ||
111 | rxfd: |
- | |
112 | .status dw ? |
- | |
113 | .command dw ? |
- | |
114 | .link dd ? |
- | |
Line 115... | Line 37... | ||
115 | .rx_buf_addr dd ? |
37 | section '.flat' readable writable executable |
Line 116... | Line 38... | ||
116 | .count dw ? |
38 | |
117 | .size dw ? |
39 | include '../proc32.inc' |
Line 154... | Line 76... | ||
154 | CmdConfigure = 0x0002 |
76 | CmdConfigure = 0x0002 |
155 | CmdTx = 0x0004 |
77 | CmdTx = 0x0004 |
156 | CmdTxFlex = 0x0008 |
78 | CmdTxFlex = 0x0008 |
157 | Cmdsuspend = 0x4000 |
79 | Cmdsuspend = 0x4000 |
Line 158... | Line -... | ||
158 | - | ||
159 | 80 | ||
160 | reg_scb_status = 0 |
81 | reg_scb_status = 0 |
161 | reg_scb_cmd = 2 |
82 | reg_scb_cmd = 2 |
162 | reg_scb_ptr = 4 |
83 | reg_scb_ptr = 4 |
163 | reg_port = 8 |
84 | reg_port = 8 |
164 | reg_eeprom = 14 |
85 | reg_eeprom = 14 |
Line -... | Line 86... | ||
- | 86 | reg_mdi_ctrl = 16 |
|
- | 87 | ||
- | 88 | phy_100a = 0x000003E0 |
|
- | 89 | phy_100c = 0x035002A8 |
|
- | 90 | phy_82555_tx = 0x015002A8 |
|
- | 91 | phy_nsc_tx = 0x5C002000 |
|
- | 92 | phy_82562_et = 0x033002A8 |
|
- | 93 | phy_82562_em = 0x032002A8 |
|
- | 94 | phy_82562_ek = 0x031002A8 |
|
- | 95 | phy_82562_eh = 0x017002A8 |
|
- | 96 | phy_82552_v = 0xd061004d |
|
- | 97 | phy_unknown = 0xFFFFFFFF |
|
- | 98 | ||
- | 99 | mac_82557_D100_A = 0 |
|
- | 100 | mac_82557_D100_B = 1 |
|
- | 101 | mac_82557_D100_C = 2 |
|
- | 102 | mac_82558_D101_A4 = 4 |
|
- | 103 | mac_82558_D101_B0 = 5 |
|
- | 104 | mac_82559_D101M = 8 |
|
- | 105 | mac_82559_D101S = 9 |
|
- | 106 | mac_82550_D102 = 12 |
|
- | 107 | mac_82550_D102_C = 13 |
|
- | 108 | mac_82551_E = 14 |
|
- | 109 | mac_82551_F = 15 |
|
- | 110 | mac_82551_10 = 16 |
|
- | 111 | mac_unknown = 0xFF |
|
- | 112 | ||
- | 113 | struct rxfd |
|
- | 114 | ||
- | 115 | status dw ? |
|
- | 116 | command dw ? |
|
- | 117 | link dd ? |
|
- | 118 | rx_buf_addr dd ? |
|
- | 119 | count dw ? |
|
- | 120 | size dw ? |
|
- | 121 | packet rb 1500 |
|
- | 122 | ||
- | 123 | ends |
|
- | 124 | ||
- | 125 | struc txfd { |
|
- | 126 | ||
- | 127 | .status dw ? |
|
- | 128 | .command dw ? |
|
- | 129 | .link dd ? |
|
- | 130 | .desc_addr dd ? |
|
- | 131 | .count dd ? |
|
- | 132 | ||
- | 133 | .buf_addr0 dd ? |
|
- | 134 | .buf_size0 dd ? |
|
- | 135 | ||
- | 136 | } |
|
- | 137 | ||
- | 138 | struc confcmd { |
|
- | 139 | ||
- | 140 | .status dw ? |
|
- | 141 | .command dw ? |
|
- | 142 | .link dd ? |
|
- | 143 | .data rb 64 |
|
- | 144 | ||
- | 145 | } |
|
- | 146 | ||
- | 147 | struc lstats { |
|
- | 148 | ||
- | 149 | .tx_good_frames dd ? |
|
- | 150 | .tx_coll16_errs dd ? |
|
- | 151 | .tx_late_colls dd ? |
|
- | 152 | .tx_underruns dd ? |
|
- | 153 | .tx_lost_carrier dd ? |
|
- | 154 | .tx_deferred dd ? |
|
- | 155 | .tx_one_colls dd ? |
|
- | 156 | .tx_multi_colls dd ? |
|
- | 157 | .tx_total_colls dd ? |
|
- | 158 | ||
- | 159 | .rx_good_frames dd ? |
|
- | 160 | .rx_crc_errs dd ? |
|
- | 161 | .rx_align_errs dd ? |
|
- | 162 | .rx_resource_errs dd ? |
|
- | 163 | .rx_overrun_errs dd ? |
|
- | 164 | .rx_colls_errs dd ? |
|
- | 165 | .rx_runt_errs dd ? |
|
- | 166 | ||
- | 167 | } |
|
- | 168 | ||
- | 169 | struct device ETH_DEVICE |
|
- | 170 | ||
- | 171 | io_addr dd ? |
|
- | 172 | pci_bus dd ? |
|
- | 173 | pci_dev dd ? |
|
- | 174 | rx_desc dd ? |
|
- | 175 | last_tx_buffer dd ? |
|
- | 176 | ee_bus_width db ? |
|
- | 177 | irq_line db ? |
|
- | 178 | ||
- | 179 | rb 0x100 - ($ and 0xff) ; align 256 |
|
- | 180 | txfd txfd |
|
- | 181 | ||
- | 182 | rb 0x100 - ($ and 0xff) ; align 256 |
|
- | 183 | confcmd confcmd |
|
- | 184 | ||
- | 185 | rb 0x100 - ($ and 0xff) ; align 256 |
|
- | 186 | lstats lstats |
|
Line 165... | Line 187... | ||
165 | reg_mdi_ctrl = 16 |
187 | |
166 | 188 | ends |
|
167 | 189 | ||
168 | macro delay { |
190 | macro delay { |
Line 178... | Line 200... | ||
178 | in ax, dx |
200 | in ax, dx |
179 | in ax, dx |
201 | in ax, dx |
180 | pop eax |
202 | pop eax |
181 | } |
203 | } |
Line 182... | Line -... | ||
182 | - | ||
183 | section '.flat' code readable align 16 |
- | |
184 | 204 | ||
185 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
205 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
186 | ;; ;; |
206 | ;; ;; |
187 | ;; proc START ;; |
207 | ;; proc START ;; |
188 | ;; ;; |
208 | ;; ;; |
189 | ;; (standard driver proc) ;; |
209 | ;; (standard driver proc) ;; |
Line 190... | Line 210... | ||
190 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
210 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
Line 191... | Line 211... | ||
191 | 211 | ||
192 | proc START stdcall, state:dword |
212 | proc START c, state:dword |
Line 193... | Line 213... | ||
193 | 213 | ||
Line 194... | Line 214... | ||
194 | cmp [state], 1 |
214 | cmp [state], 1 |
195 | jne .exit |
215 | jne .exit |
196 | 216 | ||
Line 197... | Line 217... | ||
197 | .entry: |
217 | .entry: |
198 | 218 | ||
199 | DEBUGF 1,"Loading driver\n" |
219 | DEBUGF 1,"Loading driver\n" |
Line 255... | Line 275... | ||
255 | 275 | ||
256 | ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers |
276 | ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers |
257 | mov ax , [eax+1] ; |
277 | mov ax , [eax+1] ; |
258 | .nextdevice: |
278 | .nextdevice: |
259 | mov ebx, [esi] |
279 | mov ebx, [esi] |
260 | cmp al, byte[device.pci_bus] |
280 | cmp al, byte[ebx + device.pci_bus] |
261 | jne @f |
281 | jne @f |
262 | cmp ah, byte[device.pci_dev] |
282 | cmp ah, byte[ebx + device.pci_dev] |
263 | je .find_devicenum ; Device is already loaded, let's find it's device number |
283 | je .find_devicenum ; Device is already loaded, let's find it's device number |
264 | @@: |
284 | @@: |
265 | add esi, 4 |
285 | add esi, 4 |
Line 269... | Line 289... | ||
269 | ; This device doesnt have its own eth_device structure yet, lets create one |
289 | ; This device doesnt have its own eth_device structure yet, lets create one |
270 | .firstdevice: |
290 | .firstdevice: |
271 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
291 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
272 | jae .fail |
292 | jae .fail |
Line 273... | Line 293... | ||
273 | 293 | ||
Line 274... | Line 294... | ||
274 | allocate_and_clear ebx, sizeof.device_struct, .fail ; Allocate the buffer for device structure |
294 | allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure |
Line 275... | Line 295... | ||
275 | 295 | ||
276 | ; Fill in the direct call addresses into the struct |
296 | ; Fill in the direct call addresses into the struct |
277 | 297 | ||
278 | mov [device.reset], reset |
298 | mov [ebx + device.reset], reset |
Line 279... | Line 299... | ||
279 | mov [device.transmit], transmit |
299 | mov [ebx + device.transmit], transmit |
Line 280... | Line 300... | ||
280 | mov [device.unload], unload |
300 | mov [ebx + device.unload], unload |
281 | mov [device.name], my_service |
301 | mov [ebx + device.name], my_service |
282 | 302 | ||
283 | ; save the pci bus and device numbers |
303 | ; save the pci bus and device numbers |
284 | 304 | ||
Line 285... | Line 305... | ||
285 | mov eax, [edx + IOCTL.input] |
305 | mov eax, [edx + IOCTL.input] |
Line -... | Line 306... | ||
- | 306 | movzx ecx, byte[eax+1] |
|
286 | movzx ecx, byte[eax+1] |
307 | mov [ebx + device.pci_bus], ecx |
Line 287... | Line 308... | ||
287 | mov [device.pci_bus], ecx |
308 | movzx ecx, byte[eax+2] |
Line -... | Line 309... | ||
- | 309 | mov [ebx + device.pci_dev], ecx |
|
288 | movzx ecx, byte[eax+2] |
310 | |
Line 289... | Line 311... | ||
289 | mov [device.pci_dev], ecx |
311 | ; Now, it's time to find the base io addres of the PCI device |
290 | 312 | ||
Line 291... | Line 313... | ||
291 | ; Now, it's time to find the base io addres of the PCI device |
313 | stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] |
Line 292... | Line 314... | ||
292 | 314 | mov [ebx + device.io_addr], eax |
|
293 | PCI_find_io |
315 | |
Line 294... | Line 316... | ||
294 | 316 | ; We've found the io address, find IRQ now |
|
295 | ; We've found the io address, find IRQ now |
317 | |
296 | 318 | invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
|
Line 312... | Line 334... | ||
312 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
334 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
313 | inc [devices] ; |
335 | inc [devices] ; |
Line 314... | Line 336... | ||
314 | 336 | ||
Line 315... | Line 337... | ||
315 | popf |
337 | popf |
316 | 338 | ||
Line 317... | Line 339... | ||
317 | mov [device.type], NET_TYPE_ETH |
339 | mov [ebx + device.type], NET_TYPE_ETH |
318 | call NetRegDev |
340 | invoke NetRegDev |
Line 319... | Line 341... | ||
319 | 341 | ||
Line 320... | Line 342... | ||
320 | cmp eax, -1 |
342 | cmp eax, -1 |
Line 321... | Line 343... | ||
321 | je .err |
343 | je .err |
322 | 344 | ||
323 | ret |
345 | ret |
324 | 346 | ||
325 | ; If the device was already loaded, find the device number and return it in eax |
347 | ; If the device was already loaded, find the device number and return it in eax |
326 | 348 | ||
327 | .find_devicenum: |
349 | .find_devicenum: |
Line 328... | Line 350... | ||
328 | DEBUGF 2,"Trying to find device number of already registered device\n" |
350 | DEBUGF 2,"Trying to find device number of already registered device\n" |
Line 329... | Line 351... | ||
329 | call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
351 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
330 | ; into a device number in edi |
352 | ; into a device number in edi |
Line 331... | Line 353... | ||
331 | mov eax, edi ; Application wants it in eax instead |
353 | mov eax, edi ; Application wants it in eax instead |
332 | DEBUGF 2,"Kernel says: %u\n", eax |
354 | DEBUGF 2,"Kernel says: %u\n", eax |
333 | ret |
355 | ret |
Line 378... | Line 400... | ||
378 | align 4 |
400 | align 4 |
379 | probe: |
401 | probe: |
Line 380... | Line 402... | ||
380 | 402 | ||
Line 381... | Line 403... | ||
381 | DEBUGF 1,"Probing\n" |
403 | DEBUGF 1,"Probing\n" |
- | 404 | ||
- | 405 | ; Make the device a bus master |
|
- | 406 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command |
|
Line 382... | Line 407... | ||
382 | 407 | or al, PCI_CMD_MASTER |
|
383 | PCI_make_bus_master |
408 | invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax |
Line 384... | Line 409... | ||
384 | 409 | ||
Line 385... | Line 410... | ||
385 | ;--------------------------- |
410 | ;--------------------------- |
Line 386... | Line 411... | ||
386 | ; First, identify the device |
411 | ; First, identify the device |
387 | 412 | ||
Line 422... | Line 447... | ||
422 | ;---------- |
447 | ;---------- |
Line 423... | Line 448... | ||
423 | 448 | ||
424 | align 4 |
449 | align 4 |
Line 425... | Line 450... | ||
425 | reset: |
450 | reset: |
426 | 451 | ||
427 | movzx eax, [device.irq_line] |
452 | movzx eax, [ebx + device.irq_line] |
428 | DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
453 | DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
429 | stdcall AttachIntHandler, eax, int_handler, dword 0 |
454 | invoke AttachIntHandler, eax, int_handler, ebx |
430 | test eax, eax |
455 | test eax, eax |
431 | jnz @f |
456 | jnz @f |
432 | DEBUGF 2,"Could not attach int handler!\n" |
457 | DEBUGF 2,"Could not attach int handler!\n" |
433 | ; or eax, -1 |
458 | or eax, -1 |
Line 434... | Line 459... | ||
434 | ; ret |
459 | ret |
Line 435... | Line 460... | ||
435 | @@: |
460 | @@: |
436 | 461 | ||
Line 437... | Line 462... | ||
437 | DEBUGF 1,"Resetting\n" |
462 | DEBUGF 1,"Resetting\n" |
438 | 463 | ||
439 | ;--------------- |
464 | ;--------------- |
440 | ; reset the card |
465 | ; reset the card |
Line 441... | Line 466... | ||
441 | 466 | ||
442 | set_io 0 |
467 | set_io [ebx + device.io_addr], 0 |
Line 443... | Line 468... | ||
443 | set_io reg_port |
468 | set_io [ebx + device.io_addr], reg_port |
444 | xor eax, eax ; Software Reset |
469 | xor eax, eax ; Software Reset |
Line 445... | Line 470... | ||
445 | out dx, eax |
470 | out dx, eax |
446 | 471 | ||
447 | mov esi, 10 |
472 | mov esi, 10 |
448 | call Sleep ; Give the card time to warm up. |
473 | invoke Sleep ; Give the card time to warm up. |
449 | 474 | ||
Line 450... | Line 475... | ||
450 | ;--------------------------------- |
475 | ;--------------------------------- |
451 | ; Tell device where to store stats |
476 | ; Tell device where to store stats |
452 | 477 | ||
453 | lea eax, [lstats] |
478 | lea eax, [ebx + device.lstats.tx_good_frames] ; lstats |
Line 454... | Line 479... | ||
454 | GetRealAddr |
479 | invoke GetPhysAddr |
455 | set_io 0 |
480 | set_io [ebx + device.io_addr], 0 |
Line 456... | Line 481... | ||
456 | set_io reg_scb_ptr |
481 | set_io [ebx + device.io_addr], reg_scb_ptr |
457 | out dx, eax |
482 | out dx, eax |
458 | 483 | ||
Line 459... | Line 484... | ||
459 | mov ax, INT_MASK + CU_STATSADDR |
484 | mov ax, INT_MASK + CU_STATSADDR |
460 | set_io reg_scb_cmd |
485 | set_io [ebx + device.io_addr], reg_scb_cmd |
461 | out dx, ax |
486 | out dx, ax |
462 | call cmd_wait |
487 | call cmd_wait |
Line 463... | Line 488... | ||
463 | 488 | ||
Line 478... | Line 503... | ||
478 | 503 | ||
Line 479... | Line 504... | ||
479 | call create_ring |
504 | call create_ring |
Line 480... | Line 505... | ||
480 | 505 | ||
481 | ; RX start |
506 | ; RX start |
482 | 507 | ||
483 | set_io 0 |
508 | set_io [ebx + device.io_addr], 0 |
484 | set_io reg_scb_ptr |
509 | set_io [ebx + device.io_addr], reg_scb_ptr |
Line 485... | Line 510... | ||
485 | mov eax, [device.rx_desc] |
510 | mov eax, [ebx + device.rx_desc] |
486 | GetRealAddr |
511 | invoke GetPhysAddr |
487 | out dx, eax |
512 | out dx, eax |
488 | 513 | ||
Line 489... | Line 514... | ||
489 | mov ax, INT_MASK + RX_START |
514 | mov ax, INT_MASK + RX_START |
Line 490... | Line 515... | ||
490 | set_io reg_scb_cmd |
515 | set_io [ebx + device.io_addr], reg_scb_cmd |
491 | out dx, ax |
516 | out dx, ax |
492 | call cmd_wait |
517 | call cmd_wait |
Line 493... | Line 518... | ||
493 | 518 | ||
494 | ; Set-up TX |
519 | ; Set-up TX |
495 | 520 | ||
496 | set_io reg_scb_ptr |
521 | set_io [ebx + device.io_addr], reg_scb_ptr |
Line 497... | Line 522... | ||
497 | xor eax, eax |
522 | xor eax, eax |
Line 498... | Line 523... | ||
498 | out dx, eax |
523 | out dx, eax |
499 | 524 | ||
500 | set_io reg_scb_cmd |
525 | set_io [ebx + device.io_addr], reg_scb_cmd |
501 | mov ax, INT_MASK + CU_CMD_BASE |
526 | mov ax, INT_MASK + CU_CMD_BASE |
502 | out dx, ax |
527 | out dx, ax |
Line 503... | Line 528... | ||
503 | call cmd_wait |
528 | call cmd_wait |
504 | 529 | ||
505 | ; -------------------- |
530 | ; -------------------- |
506 | 531 | ||
Line 507... | Line 532... | ||
507 | mov [confcmd.command], CmdConfigure + Cmdsuspend |
532 | mov [ebx + device.confcmd.command], CmdConfigure + Cmdsuspend |
508 | mov [confcmd.status], 0 |
533 | mov [ebx + device.confcmd.status], 0 |
509 | lea eax, [txfd] |
534 | lea eax, [ebx + device.txfd.status] |
510 | GetRealAddr |
535 | invoke GetPhysAddr |
511 | mov [confcmd.link], eax |
536 | mov [ebx + device.confcmd.link], eax |
512 | 537 | ||
513 | mov esi, confcmd_data |
538 | mov esi, confcmd_data |
514 | lea edi, [confcmd.data] |
539 | lea edi, [ebx + device.confcmd.data] |
515 | mov ecx, 22 |
540 | mov ecx, 22 |
516 | rep movsb |
541 | rep movsb |
517 | 542 | ||
518 | mov byte[confcmd.data + 1], 0x88 ; fifo of 8 each |
543 | mov byte[ebx + device.confcmd.data + 1], 0x88 ; fifo of 8 each |
Line 519... | Line 544... | ||
519 | mov byte[confcmd.data + 4], 0 |
544 | mov byte[ebx + device.confcmd.data + 4], 0 |
Line 520... | Line 545... | ||
520 | mov byte[confcmd.data + 5], 0x80 |
545 | mov byte[ebx + device.confcmd.data + 5], 0x80 |
521 | mov byte[confcmd.data + 15], 0x48 |
546 | mov byte[ebx + device.confcmd.data + 15], 0x48 |
522 | mov byte[confcmd.data + 19], 0x80 |
547 | mov byte[ebx + device.confcmd.data + 19], 0x80 |
523 | mov byte[confcmd.data + 21], 0x05 |
548 | mov byte[ebx + device.confcmd.data + 21], 0x05 |
Line 524... | Line 549... | ||
524 | 549 | ||
525 | mov [txfd.command], CmdIASetup |
550 | mov [ebx + device.txfd.command], CmdIASetup |
526 | mov [txfd.status], 0 |
551 | mov [ebx + device.txfd.status], 0 |
527 | lea eax, [confcmd] |
552 | lea eax, [ebx + device.confcmd.status] |
Line 528... | Line 553... | ||
528 | GetRealAddr |
553 | invoke GetPhysAddr |
Line 529... | Line 554... | ||
529 | mov [txfd.link], eax |
554 | mov [ebx + device.txfd.link], eax |
530 | 555 | ||
531 | ;;; copy in our MAC |
556 | ;;; copy in our MAC |
532 | 557 | ||
Line 533... | Line 558... | ||
533 | lea edi, [txfd.tx_desc_addr] |
558 | lea edi, [ebx + device.txfd.desc_addr] |
534 | lea esi, [device.mac] |
559 | lea esi, [ebx + device.mac] |
Line 535... | Line 560... | ||
535 | movsd |
560 | movsd |
536 | movsw |
561 | movsw |
537 | 562 | ||
538 | set_io reg_scb_ptr |
563 | set_io [ebx + device.io_addr], reg_scb_ptr |
539 | lea eax, [txfd] |
564 | lea eax, [ebx + device.txfd.status] |
540 | GetRealAddr |
565 | invoke GetPhysAddr |
541 | out dx, eax |
566 | out dx, eax |
Line 542... | Line 567... | ||
542 | 567 | ||
Line 543... | Line 568... | ||
543 | ; Start CU & enable ints |
568 | ; Start CU & enable ints |
Line 544... | Line 569... | ||
544 | 569 | ||
Line 545... | Line 570... | ||
545 | set_io reg_scb_cmd |
570 | set_io [ebx + device.io_addr], reg_scb_cmd |
546 | mov ax, CU_START |
571 | mov ax, CU_START |
Line 547... | Line 572... | ||
547 | out dx, ax |
572 | out dx, ax |
548 | call cmd_wait |
573 | call cmd_wait |
Line 577... | Line 602... | ||
577 | DEBUGF 1,"Creating ring\n" |
602 | DEBUGF 1,"Creating ring\n" |
Line 578... | Line 603... | ||
578 | 603 | ||
579 | ;--------------------- |
604 | ;--------------------- |
Line 580... | Line 605... | ||
580 | ; build rxfd structure |
605 | ; build rxfd structure |
581 | 606 | ||
582 | stdcall KernelAlloc, 2000 |
607 | invoke KernelAlloc, 2000 |
583 | mov [device.rx_desc], eax |
608 | mov [ebx + device.rx_desc], eax |
584 | mov esi, eax |
609 | mov esi, eax |
585 | GetRealAddr |
610 | invoke GetPhysAddr |
586 | mov [esi + rxfd.status], 0x0000 |
611 | mov [esi + rxfd.status], 0x0000 |
587 | mov [esi + rxfd.command], 0x0000 |
612 | mov [esi + rxfd.command], 0x0000 |
588 | mov [esi + rxfd.link], eax |
613 | mov [esi + rxfd.link], eax |
Line 589... | Line 614... | ||
589 | mov [esi + rxfd.count], 0 |
614 | mov [esi + rxfd.count], 0 |
590 | mov [esi + rxfd.size], 1528 |
615 | mov [esi + rxfd.size], 1528 |
Line 591... | Line 616... | ||
591 | 616 | ||
592 | ;----------------------- |
617 | ;----------------------- |
593 | ; build txfd structure |
618 | ; build txfd structure |
594 | 619 | ||
595 | lea eax, [txfd] |
620 | lea eax, [ebx + device.txfd.status] |
596 | GetRealAddr |
621 | invoke GetPhysAddr |
597 | mov [txfd.link], eax |
622 | mov [ebx + device.txfd.link], eax |
Line 598... | Line 623... | ||
598 | mov [txfd.count], 0x02208000 |
623 | mov [ebx + device.txfd.count], 0x02208000 |
Line 599... | Line -... | ||
599 | lea eax, [txfd.tx_buf_addr0] |
- | |
600 | GetRealAddr |
- | |
601 | mov [txfd.tx_desc_addr], eax |
624 | lea eax, [ebx + device.txfd.buf_addr0] |
602 | 625 | invoke GetPhysAddr |
|
603 | ret |
626 | mov [ebx + device.txfd.desc_addr], eax |
604 | 627 | ||
605 | - | ||
606 | - | ||
607 | 628 | ret |
|
608 | 629 | ||
609 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
630 | |
Line 610... | Line -... | ||
610 | ;; ;; |
- | |
611 | ;; Transmit ;; |
631 | |
Line -... | Line 632... | ||
- | 632 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
|
- | 633 | ;; ;; |
|
- | 634 | ;; Transmit ;; |
|
612 | ;; ;; |
635 | ;; ;; |
613 | ;; In: buffer pointer in [esp+4] ;; |
636 | ;; In: pointer to device structure in ebx ;; |
614 | ;; size of buffer in [esp+8] ;; |
637 | ;; ;; |
615 | ;; pointer to device structure in ebx ;; |
638 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
616 | ;; ;; |
639 | |
617 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
640 | proc transmit stdcall bufferptr, buffersize |
Line 618... | Line 641... | ||
618 | 641 | ||
619 | align 4 |
642 | pushf |
620 | transmit: |
643 | cli |
621 | 644 | ||
Line 622... | Line 645... | ||
622 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8] |
645 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] |
623 | mov eax, [esp+4] |
646 | mov eax, [bufferptr] |
624 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
- | |
625 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
647 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
626 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
648 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
627 | [eax+13]:2,[eax+12]:2 |
649 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
628 | 650 | [eax+13]:2,[eax+12]:2 |
|
629 | cmp dword [esp+8], 1514 |
651 | |
630 | ja .error ; packet is too long |
- | |
631 | cmp dword [esp+8], 60 |
- | |
632 | jb .error ; packet is too short |
- | |
Line -... | Line 652... | ||
- | 652 | cmp [buffersize], 1514 |
|
- | 653 | ja .fail |
|
633 | 654 | cmp [buffersize], 60 |
|
Line 634... | Line 655... | ||
634 | ;;; TODO: check if current descriptor is in use |
655 | jb .fail |
635 | ; fill in buffer address and size |
656 | |
636 | mov eax, [esp+4] |
657 | ;;; TODO: check if current descriptor is in use |
637 | mov [last_tx_buffer], eax ;;; FIXME |
658 | ; fill in buffer address and size |
638 | GetRealAddr |
659 | mov [ebx + device.last_tx_buffer], eax |
639 | mov [txfd.tx_buf_addr0], eax |
660 | invoke GetPhysAddr |
Line 640... | Line 661... | ||
640 | mov eax, [esp+8] |
661 | mov [ebx + device.txfd.buf_addr0], eax |
641 | mov [txfd.tx_buf_size0], eax |
662 | mov ecx, [buffersize] |
642 | 663 | mov [ebx + device.txfd.buf_size0], ecx |
|
643 | mov [txfd.status], 0 |
664 | |
644 | mov [txfd.command], Cmdsuspend + CmdTx + CmdTxFlex + 1 shl 15 ;;; EL bit |
665 | mov [ebx + device.txfd.status], 0 |
Line 645... | Line -... | ||
645 | - | ||
646 | ; mov [txfd.count], 0x02208000 ;;;;;;;;;;; |
- | |
647 | - | ||
648 | ; Inform device of the new/updated transmit descriptor |
- | |
649 | lea eax, [txfd] |
- | |
650 | GetRealAddr |
- | |
651 | set_io 0 |
- | |
652 | set_io reg_scb_ptr |
- | |
653 | out dx, eax |
- | |
654 | - | ||
655 | ; Start the transmit |
666 | mov [ebx + device.txfd.command], Cmdsuspend + CmdTx + CmdTxFlex + 1 shl 15 ;;; EL bit |
656 | mov ax, CU_START |
667 | ; mov [txfd.count], 0x02208000 ;;;;;;;;;;; |
657 | set_io reg_scb_cmd |
668 | |
658 | out dx, ax |
669 | ; Inform device of the new/updated transmit descriptor |
659 | call cmd_wait |
670 | lea eax, [ebx + device.txfd.status] |
Line 660... | Line 671... | ||
660 | 671 | invoke GetPhysAddr |
|
661 | ; set_io 0 ;; why? |
672 | set_io [ebx + device.io_addr], 0 |
662 | ; in ax, dx ;; |
673 | set_io [ebx + device.io_addr], reg_scb_ptr |
663 | ; |
674 | out dx, eax |
Line 664... | Line 675... | ||
664 | ; @@: |
675 | |
665 | ; cmp [txfd.status], 0 ; wait for completion? dont seems a good idea to me.. |
676 | ; Start the transmit |
- | 677 | mov ax, CU_START |
|
666 | ; je @r |
678 | set_io [ebx + device.io_addr], reg_scb_cmd |
667 | ; |
679 | out dx, ax |
- | 680 | call cmd_wait |
|
- | 681 | ||
- | 682 | ; Update stats |
|
Line 668... | Line 683... | ||
668 | ; set_io 0 ;; why? |
683 | inc [ebx + device.packets_tx] |
669 | ; in ax, dx ;; |
684 | mov ecx, [buffersize] |
670 | 685 | add dword[ebx + device.bytes_tx], ecx |
|
671 | ; Update stats |
686 | adc dword[ebx + device.bytes_tx + 4], 0 |
Line 704... | Line 719... | ||
704 | jz .nothing |
719 | jz .nothing |
705 | mov esi, device_list |
720 | mov esi, device_list |
706 | .nextdevice: |
721 | .nextdevice: |
707 | mov ebx, [esi] |
722 | mov ebx, [esi] |
Line 708... | Line 723... | ||
708 | 723 | ||
709 | ; set_io 0 ; reg_scb_status = 0 |
724 | ; set_io [ebx + device.io_addr], 0 ; reg_scb_status = 0 |
710 | set_io reg_scb_status |
725 | set_io [ebx + device.io_addr], reg_scb_status |
711 | in ax, dx |
726 | in ax, dx |
712 | out dx, ax ; send it back to ACK |
727 | out dx, ax ; send it back to ACK |
713 | test ax, ax |
728 | test ax, ax |
714 | jnz .got_it |
729 | jnz .got_it |
Line 735... | Line 750... | ||
735 | 750 | ||
736 | push ebx |
751 | push ebx |
737 | .rx_loop: |
752 | .rx_loop: |
Line 738... | Line 753... | ||
738 | pop ebx |
753 | pop ebx |
739 | 754 | ||
740 | mov esi, [device.rx_desc] |
755 | mov esi, [ebx + device.rx_desc] |
Line 741... | Line 756... | ||
741 | cmp [esi + rxfd.status], 0 ; we could also check bits C and OK (bit 15 and 13) |
756 | cmp [esi + rxfd.status], 0 ; we could also check bits C and OK (bit 15 and 13) |
Line 751... | Line 766... | ||
751 | push ecx |
766 | push ecx |
752 | add esi, rxfd.packet |
767 | add esi, rxfd.packet |
753 | push esi |
768 | push esi |
Line 754... | Line 769... | ||
754 | 769 | ||
755 | ; Update stats |
770 | ; Update stats |
756 | add dword [device.bytes_rx], ecx |
771 | add dword [ebx + device.bytes_rx], ecx |
757 | adc dword [device.bytes_rx + 4], 0 |
772 | adc dword [ebx + device.bytes_rx + 4], 0 |
Line 758... | Line 773... | ||
758 | inc dword [device.packets_rx] |
773 | inc dword [ebx + device.packets_rx] |
Line 759... | Line 774... | ||
759 | 774 | ||
760 | ; allocate new descriptor |
775 | ; allocate new descriptor |
761 | 776 | ||
762 | stdcall KernelAlloc, 2000 |
777 | invoke KernelAlloc, 2000 |
763 | mov [device.rx_desc], eax |
778 | mov [ebx + device.rx_desc], eax |
764 | mov esi, eax |
779 | mov esi, eax |
765 | GetRealAddr |
780 | invoke GetPhysAddr |
766 | mov [esi + rxfd.status], 0x0000 |
781 | mov [esi + rxfd.status], 0x0000 |
767 | mov [esi + rxfd.command], 0xc000 ; End of list + Suspend |
782 | mov [esi + rxfd.command], 0xc000 ; End of list + Suspend |
Line 768... | Line 783... | ||
768 | mov [esi + rxfd.link], eax |
783 | mov [esi + rxfd.link], eax |
Line 769... | Line 784... | ||
769 | mov [esi + rxfd.count], 0 |
784 | mov [esi + rxfd.count], 0 |
770 | mov [esi + rxfd.size], 1528 |
785 | mov [esi + rxfd.size], 1528 |
771 | 786 | ||
772 | ; restart RX |
787 | ; restart RX |
773 | 788 | ||
Line 774... | Line 789... | ||
774 | set_io 0 |
789 | set_io [ebx + device.io_addr], 0 |
775 | set_io reg_scb_ptr |
790 | set_io [ebx + device.io_addr], reg_scb_ptr |
776 | ; lea eax, [device.rx_desc] |
791 | ; lea eax, [ebx + device.rx_desc] |
777 | ; GetRealAddr |
792 | ; invoke GetPhysAddr |
Line 778... | Line 793... | ||
778 | out dx, eax |
793 | out dx, eax |
779 | - | ||
780 | set_io reg_scb_cmd |
794 | |
Line 781... | Line 795... | ||
781 | mov ax, RX_START |
795 | set_io [ebx + device.io_addr], reg_scb_cmd |
782 | out dx, ax |
796 | mov ax, RX_START |
783 | call cmd_wait |
797 | out dx, ax |
Line 784... | Line 798... | ||
784 | 798 | call cmd_wait |
|
Line 785... | Line 799... | ||
785 | ; And give packet to kernel |
799 | |
786 | 800 | ; And give packet to kernel |
|
787 | jmp Eth_input |
801 | jmp [Eth_input] |
788 | 802 | ||
789 | .nodata: |
803 | .nodata: |
790 | DEBUGF 1, "no more data\n" |
804 | DEBUGF 1, "no more data\n" |
791 | pop ax |
805 | pop ax |
792 | 806 | ||
793 | .no_rx: |
807 | .no_rx: |
794 | 808 | ||
Line 795... | Line 809... | ||
795 | ; Cleanup after TX |
809 | ; Cleanup after TX |
796 | cmp [txfd.status], 0 |
810 | cmp [ebx + device.txfd.status], 0 |
797 | je .done |
811 | je .done |
Line 811... | Line 825... | ||
811 | DEBUGF 1, "out of resources!\n" |
825 | DEBUGF 1, "out of resources!\n" |
812 | ; Restart the RX |
826 | ; Restart the RX |
Line 813... | Line 827... | ||
813 | 827 | ||
Line 814... | Line 828... | ||
814 | ; allocate new descriptor |
828 | ; allocate new descriptor |
815 | 829 | ||
816 | stdcall KernelAlloc, 2000 |
830 | invoke KernelAlloc, 2000 |
817 | mov [device.rx_desc], eax |
831 | mov [ebx + device.rx_desc], eax |
818 | mov esi, eax |
832 | mov esi, eax |
819 | GetRealAddr |
833 | invoke GetPhysAddr |
820 | mov [esi + rxfd.status], 0x0000 |
834 | mov [esi + rxfd.status], 0x0000 |
821 | mov [esi + rxfd.command], 0xc000 ; End of list + Suspend |
835 | mov [esi + rxfd.command], 0xc000 ; End of list + Suspend |
822 | mov [esi + rxfd.link], eax |
836 | mov [esi + rxfd.link], eax |
Line 823... | Line 837... | ||
823 | mov [esi + rxfd.count], 0 |
837 | mov [esi + rxfd.count], 0 |
Line 824... | Line 838... | ||
824 | mov [esi + rxfd.size], 1528 |
838 | mov [esi + rxfd.size], 1528 |
825 | 839 | ||
826 | ; restart RX |
840 | ; restart RX |
827 | 841 | ||
828 | set_io 0 |
842 | set_io [ebx + device.io_addr], 0 |
Line 829... | Line 843... | ||
829 | set_io reg_scb_ptr |
843 | set_io [ebx + device.io_addr], reg_scb_ptr |
830 | ; lea eax, [device.rx_desc] |
844 | ; lea eax, [ebx + device.rx_desc] |
831 | ; GetRealAddr |
845 | ; invoke GetPhysAddr |
832 | out dx, eax |
846 | out dx, eax |
Line 833... | Line 847... | ||
833 | 847 | ||
Line 863... | Line 877... | ||
863 | align 4 |
877 | align 4 |
864 | ee_read: ; esi = address to read |
878 | ee_read: ; esi = address to read |
Line 865... | Line 879... | ||
865 | 879 | ||
Line 866... | Line 880... | ||
866 | DEBUGF 1,"Eeprom read from 0x%x\n", esi |
880 | DEBUGF 1,"Eeprom read from 0x%x\n", esi |
867 | 881 | ||
Line 868... | Line 882... | ||
868 | set_io 0 |
882 | set_io [ebx + device.io_addr], 0 |
869 | set_io reg_eeprom |
883 | set_io [ebx + device.io_addr], reg_eeprom |
870 | 884 | ||
Line 871... | Line 885... | ||
871 | ;----------------------------------------------------- |
885 | ;----------------------------------------------------- |
872 | ; Prepend start bit + read opcode to the address field |
886 | ; Prepend start bit + read opcode to the address field |
873 | ; and shift it to the very left bits of esi |
887 | ; and shift it to the very left bits of esi |
874 | 888 | ||
Line 875... | Line 889... | ||
875 | mov cl, 29 |
889 | mov cl, 29 |
876 | sub cl, [device.ee_bus_width] |
890 | sub cl, [ebx + device.ee_bus_width] |
Line 877... | Line 891... | ||
877 | shl esi, cl |
891 | shl esi, cl |
878 | or esi, EE_READ shl 29 |
892 | or esi, EE_READ shl 29 |
879 | 893 | ||
Line 941... | Line 955... | ||
941 | align 4 |
955 | align 4 |
942 | ee_write: ; esi = address to write to, di = data |
956 | ee_write: ; esi = address to write to, di = data |
Line 943... | Line 957... | ||
943 | 957 | ||
Line 944... | Line 958... | ||
944 | DEBUGF 1,"Eeprom write 0x%x to 0x%x\n", di, esi |
958 | DEBUGF 1,"Eeprom write 0x%x to 0x%x\n", di, esi |
945 | 959 | ||
Line 946... | Line 960... | ||
946 | set_io 0 |
960 | set_io [ebx + device.io_addr], 0 |
947 | set_io reg_eeprom |
961 | set_io [ebx + device.io_addr], reg_eeprom |
948 | 962 | ||
Line 949... | Line 963... | ||
949 | ;----------------------------------------------------- |
963 | ;----------------------------------------------------- |
950 | ; Prepend start bit + write opcode to the address field |
964 | ; Prepend start bit + write opcode to the address field |
951 | ; and shift it to the very left bits of esi |
965 | ; and shift it to the very left bits of esi |
952 | 966 | ||
Line 953... | Line 967... | ||
953 | mov cl, 29 |
967 | mov cl, 29 |
954 | sub cl, [device.ee_bus_width] |
968 | sub cl, [ebx + device.ee_bus_width] |
Line 955... | Line 969... | ||
955 | shl esi, cl |
969 | shl esi, cl |
956 | or esi, EE_WRITE shl 29 |
970 | or esi, EE_WRITE shl 29 |
Line 1011... | Line 1025... | ||
1011 | 1025 | ||
1012 | 1026 | ||
Line 1013... | Line 1027... | ||
1013 | align 4 |
1027 | align 4 |
1014 | ee_get_width: |
1028 | ee_get_width: |
Line 1015... | Line 1029... | ||
1015 | 1029 | ||
1016 | set_io 0 |
1030 | set_io [ebx + device.io_addr], 0 |
1017 | set_io reg_eeprom |
1031 | set_io [ebx + device.io_addr], reg_eeprom |
Line 1046... | Line 1060... | ||
1046 | 1060 | ||
1047 | xor al, al |
1061 | xor al, al |
Line 1048... | Line 1062... | ||
1048 | out dx, al ; de-activate eeprom |
1062 | out dx, al ; de-activate eeprom |
1049 | 1063 | ||
1050 | sub cl, 3 ; dont count the opcode bits |
1064 | sub cl, 3 ; dont count the opcode bits |
Line 1051... | Line 1065... | ||
1051 | mov [device.ee_bus_width], cl |
1065 | mov [ebx + device.ee_bus_width], cl |
Line 1052... | Line 1066... | ||
1052 | DEBUGF 1, "Eeprom width=%u bit\n", ecx |
1066 | DEBUGF 1, "Eeprom width=%u bit\n", ecx |
Line 1078... | Line 1092... | ||
1078 | 1092 | ||
1079 | mov eax, ecx |
1093 | mov eax, ecx |
1080 | or eax, edx |
1094 | or eax, edx |
Line 1081... | Line 1095... | ||
1081 | or eax, 10b shl 26 ; read opcode |
1095 | or eax, 10b shl 26 ; read opcode |
1082 | 1096 | ||
1083 | set_io 0 |
1097 | set_io [ebx + device.io_addr], 0 |
Line 1084... | Line 1098... | ||
1084 | set_io reg_mdi_ctrl |
1098 | set_io [ebx + device.io_addr], reg_mdi_ctrl |
1085 | out dx, eax |
1099 | out dx, eax |
1086 | 1100 | ||
Line 1110... | Line 1124... | ||
1110 | 1124 | ||
1111 | or eax, ecx |
1125 | or eax, ecx |
1112 | or eax, edx |
1126 | or eax, edx |
Line 1113... | Line 1127... | ||
1113 | or eax, 01b shl 26 ; write opcode |
1127 | or eax, 01b shl 26 ; write opcode |
1114 | 1128 | ||
1115 | set_io 0 |
1129 | set_io [ebx + device.io_addr], 0 |
Line 1116... | Line 1130... | ||
1116 | set_io reg_mdi_ctrl |
1130 | set_io [ebx + device.io_addr], reg_mdi_ctrl |
1117 | out dx, eax |
1131 | out dx, eax |
1118 | 1132 | ||
Line 1133... | Line 1147... | ||
1133 | align 4 |
1147 | align 4 |
1134 | MAC_read_eeprom: |
1148 | MAC_read_eeprom: |
Line 1135... | Line 1149... | ||
1135 | 1149 | ||
1136 | mov esi, 0 |
1150 | mov esi, 0 |
1137 | call ee_read |
1151 | call ee_read |
Line 1138... | Line 1152... | ||
1138 | mov word[device.mac], si |
1152 | mov word[ebx + device.mac], si |
1139 | 1153 | ||
1140 | mov esi, 1 |
1154 | mov esi, 1 |
Line 1141... | Line 1155... | ||
1141 | call ee_read |
1155 | call ee_read |
1142 | mov word[device.mac+2], si |
1156 | mov word[ebx + device.mac+2], si |
1143 | 1157 | ||
Line 1144... | Line 1158... | ||
1144 | mov esi, 2 |
1158 | mov esi, 2 |
Line 1159... | Line 1173... | ||
1159 | 1173 | ||
Line 1160... | Line -... | ||
1160 | - | ||
Line 1161... | Line -... | ||
1161 | - | ||
- | 1174 | ||
- | 1175 | ||
- | 1176 | ; End of code |
|
1162 | ; End of code |
1177 | |
- | 1178 | ||
1163 | 1179 | data fixups |
|
1164 | align 4 ; Place all initialised data here |
1180 | end data |
Line 1165... | Line 1181... | ||
1165 | 1181 | ||
1166 | devices dd 0 ; number of currently running devices |
1182 | include '../peimport.inc' |
Line 1218... | Line 1234... | ||
1218 | dw 0x245D |
1234 | dw 0x245D |
1219 | dw 0x27DC |
1235 | dw 0x27DC |
Line 1220... | Line 1236... | ||
1220 | 1236 | ||
Line 1221... | Line -... | ||
1221 | DEVICE_IDs = ($ - device_id_list) / 2 |
- | |
1222 | - | ||
1223 | mac_82557_D100_A = 0 |
- | |
1224 | mac_82557_D100_B = 1 |
- | |
1225 | mac_82557_D100_C = 2 |
- | |
1226 | mac_82558_D101_A4 = 4 |
- | |
1227 | mac_82558_D101_B0 = 5 |
- | |
1228 | mac_82559_D101M = 8 |
- | |
1229 | mac_82559_D101S = 9 |
- | |
1230 | mac_82550_D102 = 12 |
- | |
1231 | mac_82550_D102_C = 13 |
- | |
1232 | mac_82551_E = 14 |
- | |
1233 | mac_82551_F = 15 |
- | |
1234 | mac_82551_10 = 16 |
- | |
1235 | mac_unknown = 0xFF |
- | |
1236 | - | ||
1237 | phy_100a = 0x000003E0 |
- | |
1238 | phy_100c = 0x035002A8 |
- | |
1239 | phy_82555_tx = 0x015002A8 |
- | |
1240 | phy_nsc_tx = 0x5C002000 |
- | |
1241 | phy_82562_et = 0x033002A8 |
- | |
1242 | phy_82562_em = 0x032002A8 |
- | |
1243 | phy_82562_ek = 0x031002A8 |
- | |
1244 | phy_82562_eh = 0x017002A8 |
- | |
1245 | phy_82552_v = 0xd061004d |
- | |
1246 | phy_unknown = 0xFFFFFFFF |
- | |
1247 | 1237 | DEVICE_IDs = ($ - device_id_list) / 2 |
|
Line -... | Line 1238... | ||
- | 1238 | ||
1248 | 1239 | include_debug_strings ; All data wich FDO uses will be included here |
|
1249 | include_debug_strings ; All data wich FDO uses will be included here |
- | |
1250 | 1240 |