Subversion Repositories Kolibri OS

Compare Revisions

Problem with comparison.

Regard whitespace Rev HEAD → Rev 1

/trunk/core/newproce.inc
0,0 → 1,1321
if ~defined newprocess_inc
newprocess_inc_fix:
newprocess_inc fix newprocess_inc_fix
include "mem.inc"
include "memmanag.inc"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;Working with new types of processes.
;;Author: Khalyavin Andrey halyavin@land.ru
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
iglobal
new_process_loading db 'K : New Process - loading',13,10,0
new_process_running db 'K : New Process - done',13,10,0
start_not_enough_memory db 'K : New Process - not enough memory',13,10,0
endg
;-----------------------------------------------------------------------------
find_new_process_place:
;input:
; none
;result:
; eax=[new_process_place]<>0 - ok
; 0 - failed.
;This function find least empty slot.
;It doesn't increase [0x3004]!
mov eax,0x3000+second_base_address
push ebx
mov ebx,[0x3004]
inc ebx
shl ebx,5
add ebx,eax ;ebx - address of process information for (last+1) slot
.newprocessplace:
;eax = address of process information for current slot
cmp eax,ebx
jz .endnewprocessplace ;empty slot after high boundary
add eax,0x20
cmp word [eax+0xa],9 ;check process state, 9 means that process slot is empty
jnz .newprocessplace
.endnewprocessplace:
mov ebx,eax
sub eax,0x3000+second_base_address
shr eax,5 ;calculate slot index
cmp eax,256
jge .failed ;it should be <256
mov word [ebx+0xa],9 ;set process state to 9 (for slot after hight boundary)
mov [new_process_place],eax ;save process slot
pop ebx
ret
.failed:
xor eax,eax
pop ebx
ret
;-----------------------------------------------------------------------------
 
new_start_application_floppy:
;input:
; eax - pointer to filename
; ebx - parameters to pass
;result:
; eax - pid of new process
; or 0 if call fails.
pushad
mov esi,new_process_loading
call sys_msg_board_str ;write to debug board
;wait application_table_status mutex
.table_status:
cli
cmp [application_table_status],0
jz .stf
sti
call change_task
jmp .table_status
.stf:
call set_application_table_status
;we can change system tables now
push edi
push ebx
push eax
call find_new_process_place ;find empty process slot
sti
test eax,eax
jz .failed
 
mov edi,eax
shl edi,8
add edi,0x80000
mov ecx,256/4
xor eax,eax
cld
rep stosd ;clean extended information about process
;set new process name
mov eax,[esp+8]
.find_last_byte:
cmp byte [eax],0
jz .find_last_byte_end
inc eax
jmp .find_last_byte
.find_last_byte_end:
sub eax,11 ;last 11 bytes = application name
; mov eax,[esp] ;eax - pointer to file name
mov ebx,[new_process_place]
shl ebx,8
add ebx,0x80000
mov ecx,11
call memmove
;read header of file
mov eax,[esp]
mov ebx,1 ;index of first block
mov ecx,2 ;number of blocks
mov edx,0x90000 ;temp area
mov esi,12 ;file name length
mov edi,[esp+8]
; cli
call floppy_fileread ;read file from FD
; sti
cmp eax,0
jne .cleanfailed
;check MENUET signature
cmp [0x90000],dword 'MENU'
jnz .cleanfailed
cmp [0x90004],word 'ET'
jnz .cleanfailed
call get_app_params ;parse header fields
cmp esi,0
jz .cleanfailed
mov eax,[new_process_place]
call create_app_cr3_table ;create page directory for new process
test eax,eax
jz .cleanfailed_mem
call MEM_Get_Linear_Address ;calculate linear address of it
mov ebx,std_application_base_address
mov ecx,[app_mem]
add ecx,4095
shr ecx,12
mov edx,eax
call mem_alloc_specified_region ;allocate memory for application
test eax,eax
jz .cleanfailed_mem
mov eax,[edx+(std_application_base_address shr 20)]
and eax,not (4096-1) ;eax - physical address of first (for application memory) page table
call MEM_Get_Linear_Address
mov edx,eax
;read file
mov ebx,1
mov esi,12 ;length of file name
.loop1:
;edx = linear address of current page table entry
;ebx = index of current block in file
push edx
mov eax,[edx]
and eax,not (4096-1)
call MEM_Get_Linear_Address
mov edx,eax ;read file block to current page
mov eax,[esp+4] ;restore pointer to file name
mov ecx,8 ;number of blocks read
push ebx
mov edi,[esp+16]
; cli
call floppy_fileread
;ebx=file size
; sti
pop ecx
shr ebx,9
cmp ecx,ebx
jg .endloop1 ;if end of file?
mov ebx,ecx
test eax,eax
jnz .endloop1 ;check io errors
pop edx
add ebx,8 ;go to next page
add edx,4
jmp .loop1
.endloop1:
add esp,8+4 ;pop linear address of page table entry and pointer to file name
call new_start_application_fl.add_app_parameters
mov [esp+28],eax
popad
ret
.cleanfailed_mem:
mov esi,start_not_enough_memory
call sys_msg_board_str
.cleanfailed: ;clean process name
mov edi,[new_process_place]
shl edi,8
add edi,0x80000
mov ecx,11
mov eax,' '
cld
rep stosb
.failed:
add esp,8+4
mov [application_table_status],0
popad
sti
mov eax,-1
ret
 
;-----------------------------------------------------------------------------
new_start_application_fl:
;input:
; eax - pointer to filename
; ebx - parameters to pass
;result:
; eax - pid of new process
; or 0 if call fails.
pushad
mov esi,new_process_loading
call sys_msg_board_str ;write to debug board
;wait application_table_status mutex
.table_status:
cli
cmp [application_table_status],0
jz .stf
sti
call change_task
jmp .table_status
.stf:
call set_application_table_status
;we can change system tables now
push ebx
push eax
call find_new_process_place ;find empty process slot
sti
test eax,eax
jz .failed
 
mov edi,eax
shl edi,8
add edi,0x80000
mov ecx,256/4
xor eax,eax
cld
rep stosd ;clean extended information about process
;set new process name
mov eax,[esp] ;eax - pointer to file name
mov ebx,[new_process_place]
shl ebx,8
add ebx,0x80000
mov ecx,11
call memmove
;read header of file
mov ebx,1 ;index of first block
mov ecx,2 ;number of blocks
mov edx,0x90000 ;temp area
mov esi,12 ;file name length
cli
call fileread ;read file from RD
sti
cmp eax,0
jne .cleanfailed
;check MENUET signature
cmp [0x90000],dword 'MENU'
jnz .cleanfailed
cmp [0x90004],word 'ET'
jnz .cleanfailed
call get_app_params ;parse header fields
cmp esi,0
jz .failed
mov eax,[new_process_place]
call create_app_cr3_table ;create page directory for new process
test eax,eax
jz .cleanfailed_mem
call MEM_Get_Linear_Address ;calculate linear address of it
mov ebx,std_application_base_address
mov ecx,[app_mem]
add ecx,4095
shr ecx,12
mov edx,eax
call mem_alloc_specified_region ;allocate memory for application
test eax,eax
jz .cleanfailed_mem
mov eax,[edx+(std_application_base_address shr 20)]
and eax,not (4096-1) ;eax - physical address of first (for application memory) page table
call MEM_Get_Linear_Address
mov edx,eax
;read file
mov ebx,1
mov esi,12 ;length of file name
.loop1:
;edx = linear address of current page table entry
;ebx = index of current block in file
push edx
mov eax,[edx]
and eax,not (4096-1)
call MEM_Get_Linear_Address
mov edx,eax ;read file block to current page
mov eax,[esp+4] ;restore pointer to file name
mov ecx,8 ;number of blocks read
push ebx
cli
call fileread
;ebx=file size
sti
pop ecx
shr ebx,9
cmp ecx,ebx
jg .endloop1 ;if end of file?
mov ebx,ecx
test eax,eax
jnz .endloop1 ;check io errors
pop edx
add ebx,8 ;go to next page
add edx,4
jmp .loop1
.endloop1:
add esp,8 ;pop linear address of page table entry and pointer to file name
call .add_app_parameters
mov [esp+28],eax
popad
ret
.cleanfailed_mem:
mov esi,start_not_enough_memory
call sys_msg_board_str
.cleanfailed: ;clean process name
mov edi,[new_process_place]
shl edi,8
add edi,0x80000
mov ecx,11
mov eax,' '
cld
rep stosb
.failed:
add esp,8
mov [application_table_status],0
popad
sti
mov eax,-1
ret
.add_app_parameters:
;input:
; [esp] - pointer to parameters
; [esp+4]-[esp+36] pushad registers.
;result
; eax - pid of new process
; or zero if failed
cli
mov ebx,[new_process_place]
cmp ebx,[0x3004]
jle .noinc
inc dword [0x3004] ;update number of processes
.noinc:
 
; mov ebx,[new_process_place]
;set 0x8c field of extended information about process
;(size of application memory)
shl ebx,8
mov eax,[app_mem]
mov [second_base_address+0x80000+0x8c+ebx],eax
;set 0x10 field of information about process
;(application base address)
; mov ebx,[new_process_place]
; shl ebx,5
shr ebx,3
mov dword [second_base_address+0x3000+ebx+0x10],std_application_base_address
 
;add command line parameters
.add_command_line:
mov edx,[app_i_param]
test edx,edx
jz .no_command_line ;application don't need parameters
mov eax,[esp+4]
test eax,eax
jz .no_command_line ;no parameters specified
;calculate parameter length
mov esi,eax
xor ecx,ecx
.command_line_len:
cmp byte [esi],0
jz .command_line_len_end
inc esi
inc ecx
cmp ecx,256
jl .command_line_len
.command_line_len_end:
;ecx - parameter length
;edx - address of parameters in new process address space
mov ebx,eax ;ebx - address of parameters in our address space
mov eax,[new_process_place]
call write_process_memory ;copy parameters to new process address space
.no_command_line:
mov ebx,[new_process_place]
mov eax,ebx
shl ebx,5
add ebx,0x3000 ;ebx - pointer to information about process
mov [ebx+0xe],al ;set window number on screen = process slot
mov [ebx],dword 1+2+4 ;set default event flags (see 40 function)
inc dword [process_number]
mov eax,[process_number]
mov [ebx+4],eax ;set PID
mov ecx,ebx
add ecx,draw_data-0x3000 ;ecx - pointer to draw data
;set draw data to full screen
mov [ecx+0],dword 0
mov [ecx+4],dword 0
mov eax,[0xfe00]
mov [ecx+8],eax
mov eax,[0xfe04]
mov [ecx+12],eax
;set cr3 register in TSS of application
mov ecx,[new_process_place]
shl ecx,8
mov eax,[0x800B8+ecx]
add eax,8+16 ;add flags
mov [l.cr3],eax
;write cr3 in TSS of System Call Handler
mov ecx,[new_process_place]
shl ecx,7
mov [0x298000+ecx+l.cr3-tss_sceleton],eax ;write directy to TSS
mov eax,[app_start]
mov [l.eip],eax ;set eip in TSS
mov eax,[app_esp]
mov [l.esp],eax ;set stack in TSS
;gdt
mov ebx,[new_process_place]
shl ebx,3
mov ax,app_code ;ax - selector of code segment
add ax,bx
mov [l.cs],ax
mov ax,app_data
add ax,bx ;ax - selector of data segment
mov [l.ss],ax
mov [l.ds],ax
mov [l.es],ax
mov [l.fs],ax
mov ax,graph_data ;ax - selector of graphic segment
mov [l.gs],ax
mov [l.io],word 128
mov [l.eflags],dword 0x11202
mov [l.ss0],os_data
mov [l.esp0],0x55000
; mov [l.esp1],0x56000
; mov [l.esp2],0x57000
 
;copy tss to it place
mov eax,tss_sceleton
mov ebx,[new_process_place]
imul ebx,tss_step
add ebx,tss_data ;ebx - address of application TSS
mov ecx,120
call memmove
;Add IO access table - bit array of permitted ports
or eax,-1
mov edi,[new_process_place]
imul edi,tss_step
add edi,tss_data+128
mov ecx,2048
cld
rep stosd ;full access to 2048*8=16384 ports
mov ecx,ebx ;ecx - address of application TSS
mov edi,[new_process_place]
shl edi,3
;set TSS descriptor
mov [edi+gdts+tss0+0],word tss_step ;limit (size)
mov [edi+gdts+tss0+2],cx ;part of offset
mov eax,ecx
shr eax,16
mov [edi+gdts+tss0+4],al ;part of offset
mov [edi+gdts+tss0+7],ah ;part of offset
mov [edi+gdts+tss0+5],word 01010000b*256+11101001b ;system flags
;set code and data segments
mov eax,[new_process_place]
shl eax,3
;set base address of code segment
mov word [eax+gdts+app_code-3+2],0
mov byte [eax+gdts+app_code-3+4],0
mov byte [eax+gdts+app_code-3+7],std_application_base_address shr 24
;set limit of code segment
; mov ebx,[app_mem]
; add ebx,4095
; shr ebx,12
mov ebx,(0x80000000-std_application_base_address) shr 12
mov [eax+gdts+app_code-3+0],bx
mov [eax+gdts+app_code-3+5],word 11010000b*256+11111010b+256*((0x80000000-std_application_base_address) shr 28)
;set base address of data segment
mov word [eax+gdts+app_data-3+2],0
mov byte [eax+gdts+app_data-3+4],0
mov byte [eax+gdts+app_data-3+7],std_application_base_address shr 24
;set limit of data segment
mov [eax+gdts+app_data-3+0],bx
mov [eax+gdts+app_data-3+5],word 11010000b*256+11110010b+256*((0x80000000-std_application_base_address) shr 28)
 
;flush keyboard and buttons queue
mov [0xf400],byte 0
mov [0xf500],byte 0
 
mov edi,[new_process_place]
shl edi,5
add edi,window_data
mov ebx,[new_process_place]
movzx esi,word [0xC000+ebx*2]
lea esi,[0xC400+esi*2]
call windowactivate ;gui initialization
 
mov ebx,[new_process_place]
shl ebx,5
mov [0x3000+ebx+0xa],byte 0 ;set process state - running
mov esi,new_process_running
call sys_msg_board_str ;output information about succefull startup
; add esp,4 ;pop pointer to parameters
; popad
mov eax,[process_number] ;set result
mov [application_table_status],0 ;unlock application_table_status mutex
sti
ret 4
;-----------------------------------------------------------------------------
new_sys_threads:
;eax=1 - create thread
; ebx=thread start
; ecx=thread stack value
;result:
; eax=pid
pushad
cmp eax,1
jnz .ret ;other subfunctions
mov esi,new_process_loading
call sys_msg_board_str
;lock application_table_status mutex
.table_status:
cli
cmp [application_table_status],0
je .stf
sti
call change_task
jmp .table_status
.stf:
call set_application_table_status
;find free process slot
 
call find_new_process_place
test eax,eax
jz .failed
;set parameters for thread
xor eax,eax
mov [app_i_param],eax
mov [app_i_icon],eax
mov [app_start],ebx
mov [app_esp],ecx
 
mov esi,[0x3000]
shl esi,8
add esi,0x80000
mov ebx,esi ;ebx=esi - pointer to extended information about current thread
mov edi,[new_process_place]
shl edi,8
add edi,0x80000
mov edx,edi ;edx=edi - pointer to extended infomation about new thread
mov ecx,256/4
rep stosd ;clean extended information about new thread
mov edi,edx
mov ecx,11
rep movsb ;copy process name
mov eax,[ebx+0x8c]
mov [app_mem],eax ;set memory size
mov eax,[ebx+0xb8]
mov [edx+0xb8],eax ;copy page directory
; mov eax,[new_process_place]
; mov ebx,[0x3000]
; call addreference_app_cr3_table
 
push 0 ;no parameters
call new_start_application_fl.add_app_parameters ;start thread
mov [esp+28],eax
popad
ret
.failed:
sti
popad
mov eax,-1
ret
.ret:
popad
ret
;-----------------------------------------------------------------------------
new_mem_resize:
;input:
; ebx - new size
;result:
; [esp+36]:=0 - normal
; [esp+36]:=1 - error
;This function set new application memory size.
mov esi,ebx ;save new size
add ebx,4095
and ebx,not (4096-1) ;round up size
mov ecx,[0x3000]
shl ecx,8
mov edx,[0x8008C+ecx]
add edx,4095
and edx,not (4096-1) ;old size
mov eax,[0x800B8+ecx]
call MEM_Get_Linear_Address
;eax - linear address of page directory
call MEM_Heap_Lock ;guarantee that two threads willn't
;change memory size simultaneously
cmp ebx,edx
; mov esi,ebx ;save new size
jg .expand
.free:
sub edx,ebx
jz .unlock ;do nothing
mov ecx,edx
shr ecx,12
add ebx,std_application_base_address
call mem_free_specified_region ;free unnecessary pages
jmp .unlock
 
.expand:
sub ebx,edx
mov ecx,ebx
shr ecx,12
mov ebx,edx
add ebx,std_application_base_address
call mem_alloc_specified_region ;alloc necessary pages
test eax,eax
jz .failed ;not enough memory
.unlock:
mov ebx,esi
mov eax,[0x3000]
shl eax,8
mov [eax+0x8008c],ebx ;write new memory size
;search threads and update
;application memory size infomation
mov ecx,[eax+0x800b8]
mov eax,2
.search_threads:
;eax = current slot
;ebx = new memory size
;ecx = page directory
cmp eax,[0x3004]
jg .search_threads_end
mov edx,eax
shl edx,5
cmp word [0x3000+edx+0xa],9 ;if slot empty?
jz .search_threads_next
shl edx,3
cmp [edx+0x800b8],ecx ;if it is our thread?
jnz .search_threads_next
mov [edx+0x8008c],ebx ;update memory size
.search_threads_next:
inc eax
jmp .search_threads
.search_threads_end:
 
call MEM_Heap_UnLock
mov dword [esp+36],0
ret
.failed:
call MEM_Heap_UnLock
mov dword [esp+36],1
ret
;-----------------------------------------------------------------------------
pid_to_slot:
;Input:
; eax - pid of process
;Output:
; eax - slot of process or 0 if process don't exists
;Search process by PID.
push ebx
push ecx
mov ebx,[0x3004]
shl ebx,5
mov ecx,2*32
.loop:
;ecx=offset of current process info entry
;ebx=maximum permitted offset
cmp byte [second_base_address+0x3000+ecx+0xa],9
jz .endloop ;skip empty slots
cmp [second_base_address+0x3000+ecx+0x4],eax ;check PID
jz .pid_found
.endloop:
add ecx,32
cmp ecx,ebx
jle .loop
pop ecx
pop ebx
xor eax,eax
ret
.pid_found:
shr ecx,5
mov eax,ecx ;convert offset to index of slot
pop ecx
pop ebx
ret
;-----------------------------------------------------------------------------
is_new_process:
;Input:
; eax - process slot
;Output:
; eax=1 - it is new process
; eax=0 - it is old process
; shl eax,5
; mov eax,[second_base_address+0x3000+eax+0x10]
; cmp eax,std_application_base_address ;check base address of application
; jz .new_process
; xor eax,eax
; ret
;.new_process:
mov eax,1
ret
;-----------------------------------------------------------------------------
write_process_memory:
;Input:
; eax - process slot
; ebx - buffer address
; ecx - buffer size
; edx - start address in other process
;Output:
; eax - number of bytes written
pushad
shl eax,8
mov eax,[0x80000+eax+0xB8]
call MEM_Get_Linear_Address
mov ebp,eax
;ebp=linear address of page directory of other process.
add edx,std_application_base_address ;convert to linear address
test ecx,ecx
jle .ret
.write_loop:
;ebx = current buffer address
;ecx>0 = current size
;edx = current address in other process
;ebp = linear address of page directory
 
call MEM_Heap_Lock ;cli
mov esi,edx
shr esi,22
mov eax,[ebp+4*esi] ;find page directory entry
and eax,not (4096-1) ;clear flags
test eax,eax
jz .page_not_found
call MEM_Get_Linear_Address ;calculate linear address of page table
test eax,eax
jz .page_not_found
mov esi,edx
shr esi,12
and esi,1023
mov eax,[eax+4*esi] ;find page table entry
and eax,not (4096-1)
test eax,eax
jz .page_not_found
call MEM_Get_Linear_Address ;calculate linear address of page
test eax,eax
jz .page_not_found
mov edi,eax
call MEM_Add_Reference_Linear;guarantee that page willn't disappear
call MEM_Heap_UnLock ;sti
mov esi,edx
and esi,4095
add edi,esi ;add offset in page
;edi = linear address corresponding edx in other process
sub esi,4096
neg esi ;esi - number of remaining bytes in page
cmp esi,ecx
jl .min_ecx
mov esi,ecx
.min_ecx: ;esi=min(ecx,esi) - number of bytes to write
sub ecx,esi
push ecx
mov ecx,esi ;ecx - number of bytes to write
mov esi,ebx ;esi - source, edi - destination
add edx,ecx ;move pointer in address space of other process
push edi
;move ecx bytes
test ecx,3
jnz .not_aligned
shr ecx,2
rep movsd
jmp .next_iter
.not_aligned:
rep movsb
.next_iter:
 
pop eax
and eax,not (4096-1) ;eax - linear address of current page
call MEM_Free_Page_Linear ;free reference
mov ebx,esi ;new pointer to buffer - movsb automaticaly advance it.
pop ecx ;restore number of remaining bytes
test ecx,ecx
jnz .write_loop
.ret:
popad
mov eax,ecx
ret
.page_not_found:
call MEM_Heap_UnLock ;error has appeared in critical region
sub ecx,[esp+24] ;[esp+24]<-->ecx
neg ecx ;ecx=number_of_written_bytes
mov [esp+28],ecx ;[esp+28]<-->eax
popad
ret
;-----------------------------------------------------------------------------
syscall_test:
;for testing memory manager from applications.
mov edx,ecx
mov ecx,ebx
call trans_address
mov ebx,eax
mov eax,[0x3000]
call read_process_memory
ret
;-----------------------------------------------------------------------------
read_process_memory:
;Input:
; eax - process slot
; ebx - buffer address
; ecx - buffer size
; edx - start address in other process
;Output:
; eax - number of bytes read.
pushad
shl eax,8
mov eax,[0x80000+eax+0xB8]
call MEM_Get_Linear_Address
mov ebp,eax
add edx,std_application_base_address
.read_loop:
;ebx = current buffer address
;ecx>0 = current size
;edx = current address in other process
;ebp = linear address of page directory
 
call MEM_Heap_Lock ;cli
mov esi,edx
shr esi,22
mov eax,[ebp+4*esi] ;find page directory entry
and eax,not (4096-1)
test eax,eax
jz .page_not_found
call MEM_Get_Linear_Address
test eax,eax
jz .page_not_found
mov esi,edx
shr esi,12
and esi,1023
mov eax,[eax+4*esi] ;find page table entry
and eax,not (4096-1)
test eax,eax
jz .page_not_found
call MEM_Get_Linear_Address ;calculate linear address of page
test eax,eax
jz .page_not_found
mov esi,eax
call MEM_Add_Reference_Linear;guarantee that page willn't disappear
call MEM_Heap_UnLock ;sti
mov edi,edx
and edi,4095
add esi,edi ;add offset in page
;esi = linear address corresponding edx in other process
sub edi,4096
neg edi
;edi=min(edi,ecx) - number of bytes to copy
cmp edi,ecx
jl .min_ecx
mov edi,ecx
.min_ecx:
 
sub ecx,edi ;update size of remaining bytes
add edx,edi ;update current pointer in other address space.
push ecx
mov ecx,edi ;ecx - number of bytes to read
mov edi,ebx ;esi - source, edi - destination
push esi
;move ecx bytes
test ecx,3
jnz .not_aligned
shr ecx,2
rep movsd
jmp .next_iter
.not_aligned:
rep movsb
.next_iter:
pop eax
and eax,not (4096-1) ;eax - linear address of current page
call MEM_Free_Page_Linear ;free reference
mov ebx,edi ;new pointer to buffer - movsb automaticaly advance it.
pop ecx ;restore number of remaining bytes
test ecx,ecx
jnz .read_loop
popad
mov eax,ecx
ret
.page_not_found:
call MEM_Heap_UnLock ;error has appeared in critical region
sub ecx,[esp+24] ;[esp+24]<-->ecx
neg ecx ;ecx=number_of_read_bytes
mov [esp+28],ecx ;[esp+28]<-->eax
popad
ret
;-----------------------------------------------------------------------------
check_region:
;input:
; ebx - start of buffer
; ecx - size of buffer
;result:
; eax = 1 region lays in app memory
; eax = 0 region don't lays in app memory
mov eax,[0x3000]
jmp check_process_region
;-----------------------------------------------------------------------------
check_process_region:
;input:
; eax - slot
; ebx - start of buffer
; ecx - size of buffer
;result:
; eax = 1 region lays in app memory
; eax = 0 region don't lays in app memory
test ecx,ecx
jle .ok
shl eax,5
cmp word [0x3000+eax+0xa],0
jnz .failed
shl eax,3
mov eax,[0x80000+eax+0xb8]
test eax,eax
jz .failed
call MEM_Get_Linear_Address
push ebx
push ecx
push edx
mov edx,ebx
and edx,not (4096-1)
sub ebx,edx
add ecx,ebx
mov ebx,edx
add ecx,(4096-1)
and ecx,not (4096-1)
.loop:
;eax - linear address of page directory
;ebx - current page
;ecx - current size
mov edx,ebx
shr edx,22
mov edx,[eax+4*edx]
and edx,not (4096-1)
test edx,edx
jz .failed1
push eax
mov eax,edx
call MEM_Get_Linear_Address
mov edx,ebx
shr edx,12
and edx,(1024-1)
mov eax,[eax+4*edx]
and eax,not (4096-1)
test eax,eax
pop eax
jz .failed1
add ebx,4096
sub ecx,4096
jg .loop
pop edx
pop ecx
pop ebx
.ok:
mov eax,1
ret
.failed1:
pop edx
pop ecx
pop ebx
.failed:
xor eax,eax
ret
;-----------------------------------------------------------------------------
new_sys_ipc:
;input:
; eax=1 - set ipc buffer area
; ebx=address of buffer
; ecx=size of buffer
; eax=2 - send message
; ebx=PID
; ecx=address of message
; edx=size of message
cmp eax,1
jnz .no_ipc_def
;set ipc buffer area
mov edi,[0x3000]
shl edi,8
add edi,0x80000
cli
mov [edi+0xA0],ebx ;set fields in extended information area
mov [edi+0xA4],ecx
sti
mov [esp+36],dword 0 ;success
ret
.no_ipc_def:
cmp eax,2
jnz .no_ipc_send
;send message
cli
;obtain slot from PID
mov eax,ebx
call pid_to_slot
test eax,eax
jz .no_pid
mov ebp,eax
;ebp = slot of other process
shl eax,8
mov edi,[eax+0x80000+0xa0] ;is ipc area defined?
test edi,edi
jz .no_ipc_area
mov esi,[eax+0x80000+0xa4] ;esi - size of buffer
push dword -1 ;temp variable for read_process_memory
mov ebx,esp
push ecx
push edx
mov ecx,4 ;read 4 bytes
mov eax,ebp
mov edx,edi ;from beginning of buffer.
call read_process_memory
mov eax,[esp+8]
test eax,eax
jnz .ipc_blocked ;if dword [buffer]<>0 - ipc blocked now
add edx,4 ;move to next 4 bytes
mov eax,ebp
call read_process_memory ;read size of occupied space in buffer
sub esi,8
sub esi,[esp]
sub esi,[esp+8] ;esi=(buffer size)-(occupied size)-(message size)-(header of message size)
js .buffer_overflow ;esi<0 - not enough memory in buffer
mov esi,[esp+8] ;previous offset
add dword [esp+8],8
mov edi,[esp]
add [esp+8],edi ;add (size of message)+(size of header of message) to [buffer+4]
mov eax,ebp
call write_process_memory
add edx,esi
sub edx,4 ;move to beginning of place for our message
mov eax,[second_base_address+0x3010]
mov eax,[eax+0x4] ;eax - our PID
mov [esp+8],eax
mov eax,ebp
call write_process_memory ;write PID
mov ebx,esp ;address of size of message
mov eax,ebp
add edx,4
call write_process_memory ;write size of message
add edx,4
pop ecx ;ecx - size of message
pop eax
call trans_address
mov ebx,eax ;ebx - linear address of message
add esp,4 ;pop temporary variable
mov eax,ebp
call write_process_memory ;write message
sti
;awake other process
shl ebp,8
mov eax,ebp
or [eax+0x800A8],dword 0x40
cmp dword [check_idle_semaphore],20
jge .ipc_no_cis
mov dword [check_idle_semaphore],5
.ipc_no_cis:
mov dword [esp+36],0
ret
.no_ipc_send:
mov dword [esp+36],-1
ret
.no_pid:
sti
mov dword [esp+36],4
ret
.no_ipc_area:
sti
mov dword [esp+36],1
ret
.ipc_blocked:
sti
add esp,12
mov dword [esp+36],2
ret
.buffer_overflow:
sti
add esp,12
mov dword [esp+36],3
ret
;-----------------------------------------------------------------------------
trans_address:
;Input
; eax - application address
;Output
; eax - linear address for kernel
add eax,std_application_base_address
ret
;-----------------------------------------------------------------------------
new_start_application_hd:
;eax - file name (kernel address)
;ebx - file name length
;ecx - work area (kernel address)
;ebp - parameters
pushad
mov esi,new_process_loading
call sys_msg_board_str ;write message to message board
;lock application_table_status mutex
.table_status:
cli
cmp [application_table_status],0
jz .stf
sti
call change_task
jmp .table_status
.stf:
call set_application_table_status
push ebp
push ebx
push eax
push ecx
call find_new_process_place ;find new process slot
sti
test eax,eax
jz .failed
;write application name
mov eax,[esp+4]
.find_last_byte:
cmp byte [eax],0
jz .find_last_byte_end
inc eax
jmp .find_last_byte
.find_last_byte_end:
lea esi,[eax-11] ;last 11 bytes = application name
mov edi,[new_process_place]
shl edi,8
add edi,0x80000
mov ecx,11
cld
rep movsb ;copy name to extended information about process
;read header
mov eax,[esp+4] ;file name
mov esi,[esp] ;work area
mov ecx,1 ;read from first block
mov edx,1 ;read 1 block
call read_hd_file
test eax,eax
jnz .cleanfailed
 
mov esi,[esp]
;check menuet signature
cmp [esi+1024+0],dword 'MENU' ;read_hd_file function write file to +1024 offset
jnz .cleanfailed
cmp [esi+1024+4],word 'ET'
jnz .cleanfailed
add esi,1024
mov edi,0x90000
mov ecx,512/4
cld
rep movsd ;copy first block to 0x90000 address for get_app_params function
call get_app_params
test esi,esi
jz .cleanfailed
mov eax,[new_process_place]
call create_app_cr3_table ;create page directory
test eax,eax
jz .cleanfailed_mem
call MEM_Get_Linear_Address
mov ebx,std_application_base_address
mov ecx,[app_mem]
add ecx,4096-1
shr ecx,12
mov edx,eax ;edx - linear address of page directory
call mem_alloc_specified_region ;allocate memory for application
test eax,eax
jz .cleanfailed_mem
add edx,(std_application_base_address shr 20)
mov eax,[edx]
and eax,not (4096-1)
call MEM_Get_Linear_Address
push edx ;save pointer to first page table
mov edx,eax
;read file
mov ecx,1
xor ebp,ebp
.loop1:
;[esp] - pointer to current page directory entry
;edx - pointer to current page table
;ebp - offset in page
;ecx - current cluster
push edx
mov eax,[esp+12] ;file name
mov ebx,[esp+16] ;file name length
mov esi,[esp+8] ;work area
mov edx,1 ;number of blocks to read
push ecx
push ebp
cli
call read_hd_file
sti
pop ebp
test eax,eax
jnz .endloop1 ;check io errors
mov esi,[esp+8+4] ;work area
add esi,1024
mov eax,[esp+4] ;current page table
mov eax,[eax]
and eax,not (4096-1)
call MEM_Get_Linear_Address;calculate linear page address
lea edi,[eax+ebp] ;add page offset
mov ecx,512/4
cld
rep movsd ;copy data
pop ecx
inc ecx ;next block
mov eax,[app_i_end] ;todo: precalculate ([app_i_end]+4095)/4096
add eax,512-1
shr eax,9 ;calculate application image size
cmp ecx,eax
jg .endloop11
pop edx
add ebp,512 ;new offset
test ebp,4096
jz .loop1
xor ebp,ebp
add edx,4 ;go to next page
test edx,(4096-1)
jnz .loop1
add dword [esp],4 ;go to next directory entry
mov eax,[esp]
mov eax,[eax]
and eax,not (4096-1)
call MEM_Get_Linear_Address
mov edx,eax
jmp .loop1
.endloop1:
add esp,4 ;pop ecx
.endloop11:
add esp,4+4 ;pop edx, pop edx
;add_app_parameters
add esp,12 ;now pointer to parameters is on the top of the stack
call new_start_application_fl.add_app_parameters ;start process
mov [esp+28],eax
popad
ret
.cleanfailed_mem:
mov esi,start_not_enough_memory
call sys_msg_board_str
.cleanfailed: ;clean process name
mov edi,[new_process_place]
shl edi,8
add edi,0x80000
mov ecx,11
mov eax,' '
cld
rep stosb
.failed:
add esp,16
popad
mov eax,-1
mov [application_table_status],0
sti
ret
end if