BlueGreycalmElegant

Català-Valencià – Catalan中文 – Chinese (Simplified)中文 – Chinese (Traditional)Česky – CzechDansk – DanishNederlands – DutchEnglish – EnglishSuomi – FinnishFrançais – FrenchDeutsch – Germanעברית – Hebrewहिंदी – HindiMagyar – HungarianBahasa Indonesia – IndonesianItaliano – Italian日本語 – Japanese한국어 – KoreanМакедонски – Macedonianमराठी – MarathiNorsk – NorwegianPolski – PolishPortuguês – PortuguesePortuguês – Portuguese (Brazil)Русский – RussianSlovenčina – SlovakSlovenščina – SlovenianEspañol – SpanishSvenska – SwedishTürkçe – TurkishУкраїнська – UkrainianOëzbekcha – Uzbek

Compare Revisions

• This comparison shows the changes necessary to convert path

  → /programs/develop/ @ 3925

  → /programs/develop/ @ 3926

  ↔ Reverse comparison

• Compare Path:	Rev

  With Path:	Rev

Regard whitespace Rev 3925 → Rev 3926

/programs/develop/libraries/newlib/sdk/fasm/include/libfreetype.inc
345,4 → 345,4
tt_cmap8_class_rec,'tt_cmap8_class_rec',\
tt_default_graphics_state,'tt_default_graphics_state',\
tt_driver_class,'tt_driver_class',\
winfnt_driver_class,'winfnt_driver_class',\
winfnt_driver_class,'winfnt_driver_class'

/programs/develop/libraries/zlib/FAQ
44,8 → 44,8
6. Where's the zlib documentation (man pages, etc.)?
It's in zlib.h . Examples of zlib usage are in the files example.c and
minigzip.c, with more in examples/ .
It's in zlib.h . Examples of zlib usage are in the files test/example.c
and test/minigzip.c, with more in examples/ .
7. Why don't you use GNU autoconf or libtool or ...?
84,8 → 84,10
13. How can I make a Unix shared library?
make clean
./configure -s
By default a shared (and a static) library is built for Unix. So:
make distclean
./configure
make
14. How do I install a shared zlib library on Unix?
325,7 → 327,7
correctly points to the zlib specification in RFC 1950 for the "deflate"
transfer encoding, there have been reports of servers and browsers that
incorrectly produce or expect raw deflate data per the deflate
specficiation in RFC 1951, most notably Microsoft. So even though the
specification in RFC 1951, most notably Microsoft. So even though the
"deflate" transfer encoding using the zlib format would be the more
efficient approach (and in fact exactly what the zlib format was designed
for), using the "gzip" transfer encoding is probably more reliable due to

/programs/develop/libraries/zlib/Makefile
1,46 → 1,80
# Makefile for zlib
# Copyright (C) 1995-2010 Jean-loup Gailly.
# Makefile for zlib, derived from Makefile.dj2.
# Modified for mingw32 by C. Spieler, 6/16/98.
# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003.
# Last updated: Mar 2012.
# Tested under Cygwin and MinGW.
# Copyright (C) 1995-2003 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
CC=gcc
CPP=gcc -E
STATICLIB = libz.a
SHAREDLIB = zlib.dll
IMPLIB = libz.dll.a
CFLAGS= -O3 -c -fomit-frame-pointer
PREFIX =
CC = $(PREFIX)gcc
CFLAGS = $(LOC) -U_Win32 -U_WIN32 -U__MINGW32__ -O3 -Wall -fomit-frame-pointer
AS = $(CC)
ASFLAGS = $(LOC) -Wall
LD = ld
LDFLAGS = $(LOC)
AR = $(PREFIX)ar
ARFLAGS = rcs
STRIP = $(PREFIX)strip
LDIMPORT:= -nostdlib --out-implib libzimp.a
LDFLAGS:= -shared -s -T ../newlib/dll.lds --image-base 0
LDFLAGS:= -shared -s -nostdlib -T ../newlib/dll.lds --entry _DllStartup --image-base=0 --out-implib $(IMPLIB)
INCLUDES= -I../newlib/include
LIBPATH:= -L../newlib
LIBS:= -lamz -lgcc -lcimp
LIBS:= -ldll -lc.dll
AR=ar rc
OBJC = adler32.o compress.o crc32.o deflate.o \
gzclose.o gzlib.o gzread.o gzwrite.o \
infback.o inffast.o inflate.o inftrees.o \
trees.o uncompr.o zutil.o
OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
OBJA =
all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB)
# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
OBJA =
OBJS = $(OBJC) $(OBJA)
.c.o:
$(CC) $(CFLAGS) $(INCLUDES) -c -o $@ $<
all: libz.a zlib.dll
.S.o:
$(AS) $(ASFLAGS) -c -o $@ $<
libz.a: $(OBJS)
$(AR) $@ $(OBJS)
$(STATICLIB): $(OBJS) $(OBJA)
$(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA)
zlib.dll: $(OBJECTS) Makefile
# dlltool -d zlib.def -Dlibz.dll -e exports.o -l libzimp.a
ld $(LDFLAGS) $(LDIMPORT) $(LIBPATH) -o $@ $(OBJS) $(LIBS) zlib.def
$(IMPLIB): $(SHAREDLIB)
$(SHAREDLIB): zlib.def $(OBJS) $(OBJA)
$(LD) $(LDFLAGS) $(LIBPATH) -o $@ zlib.def $(OBJS) $(OBJA) $(LIBS)
$(STRIP) $@
sed -f ../newlib/cmd1.sed zlib.def > mem
sed -f ../newlib/cmd2.sed mem >zlib.inc
%.o: %.c Makefile
$(CC) $(CFLAGS) $(INCLUDES) -o $@ $<
adler32.o: zlib.h zconf.h
compress.o: zlib.h zconf.h
crc32.o: crc32.h zlib.h zconf.h
deflate.o: deflate.h zutil.h zlib.h zconf.h
gzclose.o: zlib.h zconf.h gzguts.h
gzlib.o: zlib.h zconf.h gzguts.h
gzread.o: zlib.h zconf.h gzguts.h
gzwrite.o: zlib.h zconf.h gzguts.h
inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inftrees.o: zutil.h zlib.h zconf.h inftrees.h
trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
uncompr.o: zlib.h zconf.h
zutil.o: zutil.h zlib.h zconf.h

/programs/develop/libraries/zlib/README
1,22 → 1,22
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.5 is a general purpose data compression library. All the code is
zlib 1.2.8 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
and rfc1952.txt (gzip format).
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
rfc1952 (gzip format).
All functions of the compression library are documented in the file zlib.h
(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
of the library is given in the file example.c which also tests that the library
is working correctly. Another example is given in the file minigzip.c. The
compression library itself is composed of all source files except example.c and
minigzip.c.
of the library is given in the file test/example.c which also tests that
the library is working correctly. Another example is given in the file
test/minigzip.c. The compression library itself is composed of all source
files in the root directory.
To compile all files and run the test program, follow the instructions given at
the top of Makefile.in. In short "./configure; make test", and if that goes
well, "make install" should work for most flavors of Unix. For Windows, use one
of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use
well, "make install" should work for most flavors of Unix. For Windows, use
one of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use
make_vms.com.
Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
31,7 → 31,7
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
The changes made in version 1.2.5 are documented in the file ChangeLog.
The changes made in version 1.2.8 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
44,7 → 44,7
A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
available in Python 1.5 and later versions, see
http://www.python.org/doc/lib/module-zlib.html .
http://docs.python.org/library/zlib.html .
zlib is built into tcl: http://wiki.tcl.tk/4610 .
84,7 → 84,7
Copyright notice:
(C) 1995-2010 Jean-loup Gailly and Mark Adler
(C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages

/programs/develop/libraries/zlib/adler32.c
1,5 → 1,5
/* adler32.c -- compute the Adler-32 checksum of a data stream
* Copyright (C) 1995-2007 Mark Adler
* Copyright (C) 1995-2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
9,9 → 9,9
#define local static
local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
#define BASE 65521UL /* largest prime smaller than 65536 */
#define BASE 65521 /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
21,39 → 21,44
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
/* use NO_DIVIDE if your processor does not do division in hardware */
/* use NO_DIVIDE if your processor does not do division in hardware --
try it both ways to see which is faster */
#ifdef NO_DIVIDE
# define MOD(a) \
/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
(thank you to John Reiser for pointing this out) */
# define CHOP(a) \
do { \
if (a >= (BASE << 16)) a -= (BASE << 16); \
if (a >= (BASE << 15)) a -= (BASE << 15); \
if (a >= (BASE << 14)) a -= (BASE << 14); \
if (a >= (BASE << 13)) a -= (BASE << 13); \
if (a >= (BASE << 12)) a -= (BASE << 12); \
if (a >= (BASE << 11)) a -= (BASE << 11); \
if (a >= (BASE << 10)) a -= (BASE << 10); \
if (a >= (BASE << 9)) a -= (BASE << 9); \
if (a >= (BASE << 8)) a -= (BASE << 8); \
if (a >= (BASE << 7)) a -= (BASE << 7); \
if (a >= (BASE << 6)) a -= (BASE << 6); \
if (a >= (BASE << 5)) a -= (BASE << 5); \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
unsigned long tmp = a >> 16; \
a &= 0xffffUL; \
a += (tmp << 4) - tmp; \
} while (0)
# define MOD28(a) \
do { \
CHOP(a); \
if (a >= BASE) a -= BASE; \
} while (0)
# define MOD4(a) \
# define MOD(a) \
do { \
if (a >= (BASE << 4)) a -= (BASE << 4); \
if (a >= (BASE << 3)) a -= (BASE << 3); \
if (a >= (BASE << 2)) a -= (BASE << 2); \
if (a >= (BASE << 1)) a -= (BASE << 1); \
CHOP(a); \
MOD28(a); \
} while (0)
# define MOD63(a) \
do { /* this assumes a is not negative */ \
z_off64_t tmp = a >> 32; \
a &= 0xffffffffL; \
a += (tmp << 8) - (tmp << 5) + tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
tmp = a >> 16; \
a &= 0xffffL; \
a += (tmp << 4) - tmp; \
if (a >= BASE) a -= BASE; \
} while (0)
#else
# define MOD(a) a %= BASE
# define MOD4(a) a %= BASE
# define MOD28(a) a %= BASE
# define MOD63(a) a %= BASE
#endif
/* ========================================================================= */
92,7 → 97,7
}
if (adler >= BASE)
adler -= BASE;
MOD4(sum2); /* only added so many BASE's */
MOD28(sum2); /* only added so many BASE's */
return adler | (sum2 << 16);
}
137,8 → 142,13
unsigned long sum2;
unsigned rem;
/* for negative len, return invalid adler32 as a clue for debugging */
if (len2 < 0)
return 0xffffffffUL;
/* the derivation of this formula is left as an exercise for the reader */
rem = (unsigned)(len2 % BASE);
MOD63(len2); /* assumes len2 >= 0 */
rem = (unsigned)len2;
sum1 = adler1 & 0xffff;
sum2 = rem * sum1;
MOD(sum2);

/programs/develop/libraries/zlib/compress.c
29,7 → 29,7
z_stream stream;
int err;
stream.next_in = (Bytef*)source;
stream.next_in = (z_const Bytef *)source;
stream.avail_in = (uInt)sourceLen;
#ifdef MAXSEG_64K
/* Check for source > 64K on 16-bit machine: */

/programs/develop/libraries/zlib/crc32.c
1,5 → 1,5
/* crc32.c -- compute the CRC-32 of a data stream
* Copyright (C) 1995-2006, 2010 Mark Adler
* Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
17,6 → 17,8
of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
first call get_crc_table() to initialize the tables before allowing more than
one thread to use crc32().
DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
*/
#ifdef MAKECRCH
30,31 → 32,11
#define local static
/* Find a four-byte integer type for crc32_little() and crc32_big(). */
#ifndef NOBYFOUR
# ifdef STDC /* need ANSI C limits.h to determine sizes */
# include <limits.h>
/* Definitions for doing the crc four data bytes at a time. */
#if !defined(NOBYFOUR) && defined(Z_U4)
# define BYFOUR
# if (UINT_MAX == 0xffffffffUL)
typedef unsigned int u4;
# else
# if (ULONG_MAX == 0xffffffffUL)
typedef unsigned long u4;
# else
# if (USHRT_MAX == 0xffffffffUL)
typedef unsigned short u4;
# else
# undef BYFOUR /* can't find a four-byte integer type! */
# endif
# endif
# endif
# endif /* STDC */
#endif /* !NOBYFOUR */
/* Definitions for doing the crc four data bytes at a time. */
#ifdef BYFOUR
# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
(((w)&0xff00)<<8)+(((w)&0xff)<<24))
local unsigned long crc32_little OF((unsigned long,
const unsigned char FAR *, unsigned));
local unsigned long crc32_big OF((unsigned long,
68,16 → 50,16
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
local unsigned long FAR crc_table[TBLS][256];
local z_crc_t FAR crc_table[TBLS][256];
local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
local void write_table OF((FILE *, const z_crc_t FAR *));
#endif /* MAKECRCH */
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
107,9 → 89,9
*/
local void make_crc_table()
{
unsigned long c;
z_crc_t c;
int n, k;
unsigned long poly; /* polynomial exclusive-or pattern */
z_crc_t poly; /* polynomial exclusive-or pattern */
/* terms of polynomial defining this crc (except x^32): */
static volatile int first = 1; /* flag to limit concurrent making */
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
121,13 → 103,13
first = 0;
/* make exclusive-or pattern from polynomial (0xedb88320UL) */
poly = 0UL;
for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
poly |= 1UL << (31 - p[n]);
poly = 0;
for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
poly |= (z_crc_t)1 << (31 - p[n]);
/* generate a crc for every 8-bit value */
for (n = 0; n < 256; n++) {
c = (unsigned long)n;
c = (z_crc_t)n;
for (k = 0; k < 8; k++)
c = c & 1 ? poly ^ (c >> 1) : c >> 1;
crc_table[0][n] = c;
138,11 → 120,11
and then the byte reversal of those as well as the first table */
for (n = 0; n < 256; n++) {
c = crc_table[0][n];
crc_table[4][n] = REV(c);
crc_table[4][n] = ZSWAP32(c);
for (k = 1; k < 4; k++) {
c = crc_table[0][c & 0xff] ^ (c >> 8);
crc_table[k][n] = c;
crc_table[k + 4][n] = REV(c);
crc_table[k + 4][n] = ZSWAP32(c);
}
}
#endif /* BYFOUR */
164,7 → 146,7
if (out == NULL) return;
fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
fprintf(out, "local const unsigned long FAR ");
fprintf(out, "local const z_crc_t FAR ");
fprintf(out, "crc_table[TBLS][256] =\n{\n {\n");
write_table(out, crc_table[0]);
# ifdef BYFOUR
184,12 → 166,13
#ifdef MAKECRCH
local void write_table(out, table)
FILE *out;
const unsigned long FAR *table;
const z_crc_t FAR *table;
{
int n;
for (n = 0; n < 256; n++)
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n],
fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ",
(unsigned long)(table[n]),
n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
}
#endif /* MAKECRCH */
204,13 → 187,13
/* =========================================================================
* This function can be used by asm versions of crc32()
*/
const unsigned long FAR * ZEXPORT get_crc_table()
const z_crc_t FAR * ZEXPORT get_crc_table()
{
#ifdef DYNAMIC_CRC_TABLE
if (crc_table_empty)
make_crc_table();
#endif /* DYNAMIC_CRC_TABLE */
return (const unsigned long FAR *)crc_table;
return (const z_crc_t FAR *)crc_table;
}
/* ========================================================================= */
232,7 → 215,7
#ifdef BYFOUR
if (sizeof(void *) == sizeof(ptrdiff_t)) {
u4 endian;
z_crc_t endian;
endian = 1;
if (*((unsigned char *)(&endian)))
266,10 → 249,10
const unsigned char FAR *buf;
unsigned len;
{
register u4 c;
register const u4 FAR *buf4;
register z_crc_t c;
register const z_crc_t FAR *buf4;
c = (u4)crc;
c = (z_crc_t)crc;
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
276,7 → 259,7
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
while (len >= 32) {
DOLIT32;
len -= 32;
306,10 → 289,10
const unsigned char FAR *buf;
unsigned len;
{
register u4 c;
register const u4 FAR *buf4;
register z_crc_t c;
register const z_crc_t FAR *buf4;
c = REV((u4)crc);
c = ZSWAP32((z_crc_t)crc);
c = ~c;
while (len && ((ptrdiff_t)buf & 3)) {
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
316,7 → 299,7
len--;
}
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
buf4--;
while (len >= 32) {
DOBIG32;
333,7 → 316,7
c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
} while (--len);
c = ~c;
return (unsigned long)(REV(c));
return (unsigned long)(ZSWAP32(c));
}
#endif /* BYFOUR */

/programs/develop/libraries/zlib/crc32.h
2,7 → 2,7
* Generated automatically by crc32.c
*/
local const unsigned long FAR crc_table[TBLS][256] =
local const z_crc_t FAR crc_table[TBLS][256] =
{
{
0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

/programs/develop/libraries/zlib/deflate.c
1,5 → 1,5
/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
* Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
37,7 → 37,7
* REFERENCES
*
* Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
* Available in http://www.ietf.org/rfc/rfc1951.txt
* Available in http://tools.ietf.org/html/rfc1951
*
* A description of the Rabin and Karp algorithm is given in the book
* "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
52,7 → 52,7
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
" deflate 1.2.8 Copyright 1995-2013 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
155,6 → 155,9
struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
#endif
/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
/* ===========================================================================
* Update a hash value with the given input byte
* IN assertion: all calls to to UPDATE_HASH are made with consecutive
235,10 → 238,19
strm->msg = Z_NULL;
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
#ifdef FASTEST
if (level != 0) level = 1;
293,7 → 305,7
if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
s->pending_buf == Z_NULL) {
s->status = FINISH_STATE;
strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
strm->msg = ERR_MSG(Z_MEM_ERROR);
deflateEnd (strm);
return Z_MEM_ERROR;
}
314,43 → 326,70
uInt dictLength;
{
deflate_state *s;
uInt length = dictLength;
uInt n;
IPos hash_head = 0;
uInt str, n;
int wrap;
unsigned avail;
z_const unsigned char *next;
if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
strm->state->wrap == 2 ||
(strm->state->wrap == 1 && strm->state->status != INIT_STATE))
if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
return Z_STREAM_ERROR;
s = strm->state;
wrap = s->wrap;
if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
return Z_STREAM_ERROR;
s = strm->state;
if (s->wrap)
/* when using zlib wrappers, compute Adler-32 for provided dictionary */
if (wrap == 1)
strm->adler = adler32(strm->adler, dictionary, dictLength);
s->wrap = 0; /* avoid computing Adler-32 in read_buf */
if (length < MIN_MATCH) return Z_OK;
if (length > s->w_size) {
length = s->w_size;
dictionary += dictLength - length; /* use the tail of the dictionary */
/* if dictionary would fill window, just replace the history */
if (dictLength >= s->w_size) {
if (wrap == 0) { /* already empty otherwise */
CLEAR_HASH(s);
s->strstart = 0;
s->block_start = 0L;
s->insert = 0;
}
zmemcpy(s->window, dictionary, length);
s->strstart = length;
s->block_start = (long)length;
dictionary += dictLength - s->w_size; /* use the tail */
dictLength = s->w_size;
}
/* Insert all strings in the hash table (except for the last two bytes).
* s->lookahead stays null, so s->ins_h will be recomputed at the next
* call of fill_window.
*/
s->ins_h = s->window[0];
UPDATE_HASH(s, s->ins_h, s->window[1]);
for (n = 0; n <= length - MIN_MATCH; n++) {
INSERT_STRING(s, n, hash_head);
/* insert dictionary into window and hash */
avail = strm->avail_in;
next = strm->next_in;
strm->avail_in = dictLength;
strm->next_in = (z_const Bytef *)dictionary;
fill_window(s);
while (s->lookahead >= MIN_MATCH) {
str = s->strstart;
n = s->lookahead - (MIN_MATCH-1);
do {
UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
#ifndef FASTEST
s->prev[str & s->w_mask] = s->head[s->ins_h];
#endif
s->head[s->ins_h] = (Pos)str;
str++;
} while (--n);
s->strstart = str;
s->lookahead = MIN_MATCH-1;
fill_window(s);
}
if (hash_head) hash_head = 0; /* to make compiler happy */
s->strstart += s->lookahead;
s->block_start = (long)s->strstart;
s->insert = s->lookahead;
s->lookahead = 0;
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
strm->next_in = next;
strm->avail_in = avail;
s->wrap = wrap;
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflateReset (strm)
int ZEXPORT deflateResetKeep (strm)
z_streamp strm;
{
deflate_state *s;
380,12 → 419,23
s->last_flush = Z_NO_FLUSH;
_tr_init(s);
lm_init(s);
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflateReset (strm)
z_streamp strm;
{
int ret;
ret = deflateResetKeep(strm);
if (ret == Z_OK)
lm_init(strm->state);
return ret;
}
/* ========================================================================= */
int ZEXPORT deflateSetHeader (strm, head)
z_streamp strm;
gz_headerp head;
397,14 → 447,42
}
/* ========================================================================= */
int ZEXPORT deflatePending (strm, pending, bits)
unsigned *pending;
int *bits;
z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
if (pending != Z_NULL)
*pending = strm->state->pending;
if (bits != Z_NULL)
*bits = strm->state->bi_valid;
return Z_OK;
}
/* ========================================================================= */
int ZEXPORT deflatePrime (strm, bits, value)
z_streamp strm;
int bits;
int value;
{
deflate_state *s;
int put;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
strm->state->bi_valid = bits;
strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
s = strm->state;
if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
return Z_BUF_ERROR;
do {
put = Buf_size - s->bi_valid;
if (put > bits)
put = bits;
s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
s->bi_valid += put;
_tr_flush_bits(s);
value >>= put;
bits -= put;
} while (bits);
return Z_OK;
}
435,6 → 513,8
strm->total_in != 0) {
/* Flush the last buffer: */
err = deflate(strm, Z_BLOCK);
if (err == Z_BUF_ERROR && s->pending == 0)
err = Z_OK;
}
if (s->level != level) {
s->level = level;
562,19 → 642,22
local void flush_pending(strm)
z_streamp strm;
{
unsigned len = strm->state->pending;
unsigned len;
deflate_state *s = strm->state;
_tr_flush_bits(s);
len = s->pending;
if (len > strm->avail_out) len = strm->avail_out;
if (len == 0) return;
zmemcpy(strm->next_out, strm->state->pending_out, len);
zmemcpy(strm->next_out, s->pending_out, len);
strm->next_out += len;
strm->state->pending_out += len;
s->pending_out += len;
strm->total_out += len;
strm->avail_out -= len;
strm->state->pending -= len;
if (strm->state->pending == 0) {
strm->state->pending_out = strm->state->pending_buf;
s->pending -= len;
if (s->pending == 0) {
s->pending_out = s->pending_buf;
}
}
801,7 → 884,7
* flushes. For repeated and useless calls with Z_FINISH, we keep
* returning Z_STREAM_END instead of Z_BUF_ERROR.
*/
} else if (strm->avail_in == 0 && flush <= old_flush &&
} else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
flush != Z_FINISH) {
ERR_RETURN(strm, Z_BUF_ERROR);
}
850,6 → 933,7
if (s->lookahead == 0) {
s->strstart = 0;
s->block_start = 0L;
s->insert = 0;
}
}
}
945,12 → 1029,12
ss = source->state;
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
if (ds == Z_NULL) return Z_MEM_ERROR;
dest->state = (struct internal_state FAR *) ds;
zmemcpy(ds, ss, sizeof(deflate_state));
zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
ds->strm = dest;
ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
966,8 → 1050,8
}
/* following zmemcpy do not work for 16-bit MSDOS */
zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
1001,15 → 1085,15
strm->avail_in -= len;
zmemcpy(buf, strm->next_in, len);
if (strm->state->wrap == 1) {
strm->adler = adler32(strm->adler, strm->next_in, len);
strm->adler = adler32(strm->adler, buf, len);
}
#ifdef GZIP
else if (strm->state->wrap == 2) {
strm->adler = crc32(strm->adler, strm->next_in, len);
strm->adler = crc32(strm->adler, buf, len);
}
#endif
zmemcpy(buf, strm->next_in, len);
strm->next_in += len;
strm->total_in += len;
1036,6 → 1120,7
s->strstart = 0;
s->block_start = 0L;
s->lookahead = 0;
s->insert = 0;
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
s->ins_h = 0;
1310,6 → 1395,8
unsigned more; /* Amount of free space at the end of the window. */
uInt wsize = s->w_size;
Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
do {
more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
1362,7 → 1449,7
#endif
more += wsize;
}
if (s->strm->avail_in == 0) return;
if (s->strm->avail_in == 0) break;
/* If there was no sliding:
* strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
1381,13 → 1468,25
s->lookahead += n;
/* Initialize the hash value now that we have some input: */
if (s->lookahead >= MIN_MATCH) {
s->ins_h = s->window[s->strstart];
UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
if (s->lookahead + s->insert >= MIN_MATCH) {
uInt str = s->strstart - s->insert;
s->ins_h = s->window[str];
UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
#if MIN_MATCH != 3
Call UPDATE_HASH() MIN_MATCH-3 more times
#endif
while (s->insert) {
UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
#ifndef FASTEST
s->prev[str & s->w_mask] = s->head[s->ins_h];
#endif
s->head[s->ins_h] = (Pos)str;
str++;
s->insert--;
if (s->lookahead + s->insert < MIN_MATCH)
break;
}
}
/* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
* but this is not important since only literal bytes will be emitted.
*/
1427,6 → 1526,9
s->high_water += init;
}
}
Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
"not enough room for search");
}
/* ===========================================================================
1506,9 → 1608,15
FLUSH_BLOCK(s, 0);
}
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if ((long)s->strstart > s->block_start)
FLUSH_BLOCK(s, 0);
return block_done;
}
/* ===========================================================================
* Compress as much as possible from the input stream, return the current
1603,9 → 1711,15
}
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
#ifndef FASTEST
/* ===========================================================================
1728,9 → 1842,15
_tr_tally_lit(s, s->window[s->strstart-1], bflush);
s->match_available = 0;
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
#endif /* FASTEST */
/* ===========================================================================
1749,11 → 1869,11
for (;;) {
/* Make sure that we always have enough lookahead, except
* at the end of the input file. We need MAX_MATCH bytes
* for the longest encodable run.
* for the longest run, plus one for the unrolled loop.
*/
if (s->lookahead < MAX_MATCH) {
if (s->lookahead <= MAX_MATCH) {
fill_window(s);
if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
return need_more;
}
if (s->lookahead == 0) break; /* flush the current block */
1776,6 → 1896,7
if (s->match_length > s->lookahead)
s->match_length = s->lookahead;
}
Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
}
/* Emit match if have run of MIN_MATCH or longer, else emit literal */
1796,9 → 1917,15
}
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}
/* ===========================================================================
* For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table.
1829,6 → 1956,12
s->strstart++;
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
s->insert = 0;
if (flush == Z_FINISH) {
FLUSH_BLOCK(s, 1);
return finish_done;
}
if (s->last_lit)
FLUSH_BLOCK(s, 0);
return block_done;
}

/programs/develop/libraries/zlib/deflate.h
1,5 → 1,5
/* deflate.h -- internal compression state
* Copyright (C) 1995-2010 Jean-loup Gailly
* Copyright (C) 1995-2012 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
48,6 → 48,9
#define MAX_BITS 15
/* All codes must not exceed MAX_BITS bits */
#define Buf_size 16
/* size of bit buffer in bi_buf */
#define INIT_STATE 42
#define EXTRA_STATE 69
#define NAME_STATE 73
101,7 → 104,7
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
gz_headerp gzhead; /* gzip header information to write */
uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
Byte method; /* can only be DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
/* used by deflate.c: */
188,7 → 191,7
int nice_match; /* Stop searching when current match exceeds this */
/* used by trees.c: */
/* Didn't use ct_data typedef below to supress compiler warning */
/* Didn't use ct_data typedef below to suppress compiler warning */
struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
244,7 → 247,7
ulg opt_len; /* bit length of current block with optimal trees */
ulg static_len; /* bit length of current block with static trees */
uInt matches; /* number of string matches in current block */
int last_eob_len; /* bit length of EOB code for last block */
uInt insert; /* bytes at end of window left to insert */
#ifdef DEBUG
ulg compressed_len; /* total bit length of compressed file mod 2^32 */
294,6 → 297,7
int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));
void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
ulg stored_len, int last));

/programs/develop/libraries/zlib/gzguts.h
1,5 → 1,5
/* gzguts.h -- zlib internal header definitions for gz* operations
* Copyright (C) 2004, 2005, 2010 Mark Adler
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
12,7 → 12,7
# endif
#endif
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
#ifdef HAVE_HIDDEN
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
31,11 → 31,14
# define NO_GZCOMPRESS
#endif
#ifdef _MSC_VER
# include <io.h>
# define vsnprintf _vsnprintf
#endif
#define NO_vsnprintf
/* unlike snprintf (which is required in C99, yet still not supported by
Microsoft more than a decade later!), _snprintf does not guarantee null
termination of the result -- however this is only used in gzlib.c where
the result is assured to fit in the space provided */
#ifndef local
# define local static
#endif
52,7 → 55,7
# include <windows.h>
# define zstrerror() gz_strwinerror((DWORD)GetLastError())
#else
# ifdef STDC
# ifndef NO_STRERROR
# include <errno.h>
# define zstrerror() strerror(errno)
# else
68,7 → 71,15
ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
#endif
/* default i/o buffer size -- double this for output when reading */
/* default memLevel */
#if MAX_MEM_LEVEL >= 8
# define DEF_MEM_LEVEL 8
#else
# define DEF_MEM_LEVEL MAX_MEM_LEVEL
#endif
/* default i/o buffer size -- double this for output when reading (this and
twice this must be able to fit in an unsigned type) */
#define GZBUFSIZE 8192
/* gzip modes, also provide a little integrity check on the passed structure */
84,23 → 95,25
/* internal gzip file state data structure */
typedef struct {
/* exposed contents for gzgetc() macro */
struct gzFile_s x; /* "x" for exposed */
/* x.have: number of bytes available at x.next */
/* x.next: next output data to deliver or write */
/* x.pos: current position in uncompressed data */
/* used for both reading and writing */
int mode; /* see gzip modes above */
int fd; /* file descriptor */
char *path; /* path or fd for error messages */
z_off64_t pos; /* current position in uncompressed data */
unsigned size; /* buffer size, zero if not allocated yet */
unsigned want; /* requested buffer size, default is GZBUFSIZE */
unsigned char *in; /* input buffer */
unsigned char *out; /* output buffer (double-sized when reading) */
unsigned char *next; /* next output data to deliver or write */
int direct; /* 0 if processing gzip, 1 if transparent */
/* just for reading */
unsigned have; /* amount of output data unused at next */
int how; /* 0: get header, 1: copy, 2: decompress */
z_off64_t start; /* where the gzip data started, for rewinding */
int eof; /* true if end of input file reached */
z_off64_t start; /* where the gzip data started, for rewinding */
z_off64_t raw; /* where the raw data started, for seeking */
int how; /* 0: get header, 1: copy, 2: decompress */
int direct; /* true if last read direct, false if gzip */
int past; /* true if read requested past end */
/* just for writing */
int level; /* compression level */
int strategy; /* compression strategy */

/programs/develop/libraries/zlib/gzlib.c
1,19 → 1,23
/* gzlib.c -- zlib functions common to reading and writing gzip files
* Copyright (C) 2004, 2010 Mark Adler
* Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#include "gzguts.h"
#if defined(_WIN32) && !defined(__BORLANDC__)
# define LSEEK _lseeki64
#else
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
# define LSEEK lseek64
#else
# define LSEEK lseek
#endif
#endif
/* Local functions */
local void gz_reset OF((gz_statep));
local gzFile gz_open OF((const char *, int, const char *));
local gzFile gz_open OF((const void *, int, const char *));
#if defined UNDER_CE
71,28 → 75,40
local void gz_reset(state)
gz_statep state;
{
state->x.have = 0; /* no output data available */
if (state->mode == GZ_READ) { /* for reading ... */
state->have = 0; /* no output data available */
state->eof = 0; /* not at end of file */
state->past = 0; /* have not read past end yet */
state->how = LOOK; /* look for gzip header */
state->direct = 1; /* default for empty file */
}
state->seek = 0; /* no seek request pending */
gz_error(state, Z_OK, NULL); /* clear error */
state->pos = 0; /* no uncompressed data yet */
state->x.pos = 0; /* no uncompressed data yet */
state->strm.avail_in = 0; /* no input data yet */
}
/* Open a gzip file either by name or file descriptor. */
local gzFile gz_open(path, fd, mode)
const char *path;
const void *path;
int fd;
const char *mode;
{
gz_statep state;
size_t len;
int oflag;
#ifdef O_CLOEXEC
int cloexec = 0;
#endif
#ifdef O_EXCL
int exclusive = 0;
#endif
/* check input */
if (path == NULL)
return NULL;
/* allocate gzFile structure to return */
state = malloc(sizeof(gz_state));
state = (gz_statep)malloc(sizeof(gz_state));
if (state == NULL)
return NULL;
state->size = 0; /* no buffers allocated yet */
103,6 → 119,7
state->mode = GZ_NONE;
state->level = Z_DEFAULT_COMPRESSION;
state->strategy = Z_DEFAULT_STRATEGY;
state->direct = 0;
while (*mode) {
if (*mode >= '0' && *mode <= '9')
state->level = *mode - '0';
124,6 → 141,16
return NULL;
case 'b': /* ignore -- will request binary anyway */
break;
#ifdef O_CLOEXEC
case 'e':
cloexec = 1;
break;
#endif
#ifdef O_EXCL
case 'x':
exclusive = 1;
break;
#endif
case 'f':
state->strategy = Z_FILTERED;
break;
135,6 → 162,10
break;
case 'F':
state->strategy = Z_FIXED;
break;
case 'T':
state->direct = 1;
break;
default: /* could consider as an error, but just ignore */
;
}
147,17 → 178,46
return NULL;
}
/* can't force transparent read */
if (state->mode == GZ_READ) {
if (state->direct) {
free(state);
return NULL;
}
state->direct = 1; /* for empty file */
}
/* save the path name for error messages */
state->path = malloc(strlen(path) + 1);
#ifdef _WIN32
if (fd == -2) {
len = wcstombs(NULL, path, 0);
if (len == (size_t)-1)
len = 0;
}
else
#endif
len = strlen((const char *)path);
state->path = (char *)malloc(len + 1);
if (state->path == NULL) {
free(state);
return NULL;
}
#ifdef _WIN32
if (fd == -2)
if (len)
wcstombs(state->path, path, len + 1);
else
*(state->path) = 0;
else
#endif
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(state->path, len + 1, "%s", (const char *)path);
#else
strcpy(state->path, path);
#endif
/* open the file with the appropriate mode (or just use fd) */
state->fd = fd != -1 ? fd :
open(path,
/* compute the flags for open() */
oflag =
#ifdef O_LARGEFILE
O_LARGEFILE |
#endif
164,13 → 224,25
#ifdef O_BINARY
O_BINARY |
#endif
#ifdef O_CLOEXEC
(cloexec ? O_CLOEXEC : 0) |
#endif
(state->mode == GZ_READ ?
O_RDONLY :
(O_WRONLY | O_CREAT | (
state->mode == GZ_WRITE ?
(O_WRONLY | O_CREAT |
#ifdef O_EXCL
(exclusive ? O_EXCL : 0) |
#endif
(state->mode == GZ_WRITE ?
O_TRUNC :
O_APPEND))),
0666);
O_APPEND)));
/* open the file with the appropriate flags (or just use fd) */
state->fd = fd > -1 ? fd : (
#ifdef _WIN32
fd == -2 ? _wopen(path, oflag, 0666) :
#endif
open((const char *)path, oflag, 0666));
if (state->fd == -1) {
free(state->path);
free(state);
216,9 → 288,13
char *path; /* identifier for error messages */
gzFile gz;
if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
return NULL;
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
#else
sprintf(path, "<fd:%d>", fd); /* for debugging */
#endif
gz = gz_open(path, fd, mode);
free(path);
return gz;
225,6 → 301,16
}
/* -- see zlib.h -- */
#ifdef _WIN32
gzFile ZEXPORT gzopen_w(path, mode)
const wchar_t *path;
const char *mode;
{
return gz_open(path, -2, mode);
}
#endif
/* -- see zlib.h -- */
int ZEXPORT gzbuffer(file, size)
gzFile file;
unsigned size;
243,8 → 329,8
return -1;
/* check and set requested size */
if (size == 0)
return -1;
if (size < 2)
size = 2; /* need two bytes to check magic header */
state->want = size;
return 0;
}
261,7 → 347,8
state = (gz_statep)file;
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ || state->err != Z_OK)
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* back up and start over */
289,7 → 376,7
return -1;
/* check that there's no error */
if (state->err != Z_OK)
if (state->err != Z_OK && state->err != Z_BUF_ERROR)
return -1;
/* can only seek from start or relative to current position */
298,7 → 385,7
/* normalize offset to a SEEK_CUR specification */
if (whence == SEEK_SET)
offset -= state->pos;
offset -= state->x.pos;
else if (state->seek)
offset += state->skip;
state->seek = 0;
305,17 → 392,18
/* if within raw area while reading, just go there */
if (state->mode == GZ_READ && state->how == COPY &&
state->pos + offset >= state->raw) {
ret = LSEEK(state->fd, offset - state->have, SEEK_CUR);
state->x.pos + offset >= 0) {
ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
if (ret == -1)
return -1;
state->have = 0;
state->x.have = 0;
state->eof = 0;
state->past = 0;
state->seek = 0;
gz_error(state, Z_OK, NULL);
state->strm.avail_in = 0;
state->pos += offset;
return state->pos;
state->x.pos += offset;
return state->x.pos;
}
/* calculate skip amount, rewinding if needed for back seek when reading */
322,7 → 410,7
if (offset < 0) {
if (state->mode != GZ_READ) /* writing -- can't go backwards */
return -1;
offset += state->pos;
offset += state->x.pos;
if (offset < 0) /* before start of file! */
return -1;
if (gzrewind(file) == -1) /* rewind, then skip to offset */
331,11 → 419,11
/* if reading, skip what's in output buffer (one less gzgetc() check) */
if (state->mode == GZ_READ) {
n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
(unsigned)offset : state->have;
state->have -= n;
state->next += n;
state->pos += n;
n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
(unsigned)offset : state->x.have;
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
offset -= n;
}
344,7 → 432,7
state->seek = 1;
state->skip = offset;
}
return state->pos + offset;
return state->x.pos + offset;
}
/* -- see zlib.h -- */
373,7 → 461,7
return -1;
/* return position */
return state->pos + (state->seek ? state->skip : 0);
return state->x.pos + (state->seek ? state->skip : 0);
}
/* -- see zlib.h -- */
433,8 → 521,7
return 0;
/* return end-of-file state */
return state->mode == GZ_READ ?
(state->eof && state->strm.avail_in == 0 && state->have == 0) : 0;
return state->mode == GZ_READ ? state->past : 0;
}
/* -- see zlib.h -- */
454,7 → 541,8
/* return error information */
if (errnum != NULL)
*errnum = state->err;
return state->msg == NULL ? "" : state->msg;
return state->err == Z_MEM_ERROR ? "out of memory" :
(state->msg == NULL ? "" : state->msg);
}
/* -- see zlib.h -- */
471,8 → 559,10
return;
/* clear error and end-of-file */
if (state->mode == GZ_READ)
if (state->mode == GZ_READ) {
state->eof = 0;
state->past = 0;
}
gz_error(state, Z_OK, NULL);
}
494,26 → 584,33
state->msg = NULL;
}
/* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
if (err != Z_OK && err != Z_BUF_ERROR)
state->x.have = 0;
/* set error code, and if no message, then done */
state->err = err;
if (msg == NULL)
return;
/* for an out of memory error, save as static string */
if (err == Z_MEM_ERROR) {
state->msg = (char *)msg;
/* for an out of memory error, return literal string when requested */
if (err == Z_MEM_ERROR)
return;
}
/* construct error message with path */
if ((state->msg = malloc(strlen(state->path) + strlen(msg) + 3)) == NULL) {
if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
NULL) {
state->err = Z_MEM_ERROR;
state->msg = (char *)"out of memory";
return;
}
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
"%s%s%s", state->path, ": ", msg);
#else
strcpy(state->msg, state->path);
strcat(state->msg, ": ");
strcat(state->msg, msg);
#endif
return;
}

/programs/develop/libraries/zlib/gzread.c
1,5 → 1,5
/* gzread.c -- zlib functions for reading gzip files
* Copyright (C) 2004, 2005, 2010 Mark Adler
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
8,10 → 8,9
/* Local functions */
local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
local int gz_avail OF((gz_statep));
local int gz_next4 OF((gz_statep, unsigned long *));
local int gz_head OF((gz_statep));
local int gz_look OF((gz_statep));
local int gz_decomp OF((gz_statep));
local int gz_make OF((gz_statep));
local int gz_fetch OF((gz_statep));
local int gz_skip OF((gz_statep, z_off64_t));
/* Use read() to load a buffer -- return -1 on error, otherwise 0. Read from
46,73 → 45,54
error, 0 otherwise. Note that the eof flag is set when the end of the input
file is reached, even though there may be unused data in the buffer. Once
that data has been used, no more attempts will be made to read the file.
gz_avail() assumes that strm->avail_in == 0. */
If strm->avail_in != 0, then the current data is moved to the beginning of
the input buffer, and then the remainder of the buffer is loaded with the
available data from the input file. */
local int gz_avail(state)
gz_statep state;
{
unsigned got;
z_streamp strm = &(state->strm);
if (state->err != Z_OK)
if (state->err != Z_OK && state->err != Z_BUF_ERROR)
return -1;
if (state->eof == 0) {
if (gz_load(state, state->in, state->size,
(unsigned *)&(strm->avail_in)) == -1)
if (strm->avail_in) { /* copy what's there to the start */
unsigned char *p = state->in;
unsigned const char *q = strm->next_in;
unsigned n = strm->avail_in;
do {
*p++ = *q++;
} while (--n);
}
if (gz_load(state, state->in + strm->avail_in,
state->size - strm->avail_in, &got) == -1)
return -1;
strm->avail_in += got;
strm->next_in = state->in;
}
return 0;
}
/* Get next byte from input, or -1 if end or error. */
#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
(strm->avail_in == 0 ? -1 : \
(strm->avail_in--, *(strm->next_in)++)))
/* Get a four-byte little-endian integer and return 0 on success and the value
in *ret. Otherwise -1 is returned and *ret is not modified. */
local int gz_next4(state, ret)
gz_statep state;
unsigned long *ret;
{
int ch;
unsigned long val;
z_streamp strm = &(state->strm);
val = NEXT();
val += (unsigned)NEXT() << 8;
val += (unsigned long)NEXT() << 16;
ch = NEXT();
if (ch == -1)
return -1;
val += (unsigned long)ch << 24;
*ret = val;
return 0;
}
/* Look for gzip header, set up for inflate or copy. state->have must be zero.
/* Look for gzip header, set up for inflate or copy. state->x.have must be 0.
If this is the first time in, allocate required memory. state->how will be
left unchanged if there is no more input data available, will be set to COPY
if there is no gzip header and direct copying will be performed, or it will
be set to GZIP for decompression, and the gzip header will be skipped so
that the next available input data is the raw deflate stream. If direct
copying, then leftover input data from the input buffer will be copied to
the output buffer. In that case, all further file reads will be directly to
either the output buffer or a user buffer. If decompressing, the inflate
state and the check value will be initialized. gz_head() will return 0 on
success or -1 on failure. Failures may include read errors or gzip header
errors. */
local int gz_head(state)
be set to GZIP for decompression. If direct copying, then leftover input
data from the input buffer will be copied to the output buffer. In that
case, all further file reads will be directly to either the output buffer or
a user buffer. If decompressing, the inflate state will be initialized.
gz_look() will return 0 on success or -1 on failure. */
local int gz_look(state)
gz_statep state;
{
z_streamp strm = &(state->strm);
int flags;
unsigned len;
/* allocate read buffers and inflate memory */
if (state->size == 0) {
/* allocate buffers */
state->in = malloc(state->want);
state->out = malloc(state->want << 1);
state->in = (unsigned char *)malloc(state->want);
state->out = (unsigned char *)malloc(state->want << 1);
if (state->in == NULL || state->out == NULL) {
if (state->out != NULL)
free(state->out);
129,7 → 109,7
state->strm.opaque = Z_NULL;
state->strm.avail_in = 0;
state->strm.next_in = Z_NULL;
if (inflateInit2(&(state->strm), -15) != Z_OK) { /* raw inflate */
if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) { /* gunzip */
free(state->out);
free(state->in);
state->size = 0;
138,8 → 118,8
}
}
/* get some data in the input buffer */
if (strm->avail_in == 0) {
/* get at least the magic bytes in the input buffer */
if (strm->avail_in < 2) {
if (gz_avail(state) == -1)
return -1;
if (strm->avail_in == 0)
146,75 → 126,37
return 0;
}
/* look for the gzip magic header bytes 31 and 139 */
if (strm->next_in[0] == 31) {
strm->avail_in--;
strm->next_in++;
if (strm->avail_in == 0 && gz_avail(state) == -1)
return -1;
if (strm->avail_in && strm->next_in[0] == 139) {
/* we have a gzip header, woo hoo! */
strm->avail_in--;
strm->next_in++;
/* skip rest of header */
if (NEXT() != 8) { /* compression method */
gz_error(state, Z_DATA_ERROR, "unknown compression method");
return -1;
}
flags = NEXT();
if (flags & 0xe0) { /* reserved flag bits */
gz_error(state, Z_DATA_ERROR, "unknown header flags set");
return -1;
}
NEXT(); /* modification time */
NEXT();
NEXT();
NEXT();
NEXT(); /* extra flags */
NEXT(); /* operating system */
if (flags & 4) { /* extra field */
len = (unsigned)NEXT();
len += (unsigned)NEXT() << 8;
while (len--)
if (NEXT() < 0)
break;
}
if (flags & 8) /* file name */
while (NEXT() > 0)
;
if (flags & 16) /* comment */
while (NEXT() > 0)
;
if (flags & 2) { /* header crc */
NEXT();
NEXT();
}
/* an unexpected end of file is not checked for here -- it will be
noticed on the first request for uncompressed data */
/* set up for decompression */
/* look for gzip magic bytes -- if there, do gzip decoding (note: there is
a logical dilemma here when considering the case of a partially written
gzip file, to wit, if a single 31 byte is written, then we cannot tell
whether this is a single-byte file, or just a partially written gzip
file -- for here we assume that if a gzip file is being written, then
the header will be written in a single operation, so that reading a
single byte is sufficient indication that it is not a gzip file) */
if (strm->avail_in > 1 &&
strm->next_in[0] == 31 && strm->next_in[1] == 139) {
inflateReset(strm);
strm->adler = crc32(0L, Z_NULL, 0);
state->how = GZIP;
state->direct = 0;
return 0;
}
else {
/* not a gzip file -- save first byte (31) and fall to raw i/o */
state->out[0] = 31;
state->have = 1;
/* no gzip header -- if we were decoding gzip before, then this is trailing
garbage. Ignore the trailing garbage and finish. */
if (state->direct == 0) {
strm->avail_in = 0;
state->eof = 1;
state->x.have = 0;
return 0;
}
}
/* doing raw i/o, save start of raw data for seeking, copy any leftover
input to output -- this assumes that the output buffer is larger than
the input buffer, which also assures space for gzungetc() */
state->raw = state->pos;
state->next = state->out;
/* doing raw i/o, copy any leftover input to output -- this assumes that
the output buffer is larger than the input buffer, which also assures
space for gzungetc() */
state->x.next = state->out;
if (strm->avail_in) {
memcpy(state->next + state->have, strm->next_in, strm->avail_in);
state->have += strm->avail_in;
memcpy(state->x.next, strm->next_in, strm->avail_in);
state->x.have = strm->avail_in;
strm->avail_in = 0;
}
state->how = COPY;
223,19 → 165,15
}
/* Decompress from input to the provided next_out and avail_out in the state.
If the end of the compressed data is reached, then verify the gzip trailer
check value and length (modulo 2^32). state->have and state->next are set
to point to the just decompressed data, and the crc is updated. If the
trailer is verified, state->how is reset to LOOK to look for the next gzip
stream or raw data, once state->have is depleted. Returns 0 on success, -1
on failure. Failures may include invalid compressed data or a failed gzip
trailer verification. */
On return, state->x.have and state->x.next point to the just decompressed
data. If the gzip stream completes, state->how is reset to LOOK to look for
the next gzip stream or raw data, once state->x.have is depleted. Returns 0
on success, -1 on failure. */
local int gz_decomp(state)
gz_statep state;
{
int ret;
int ret = Z_OK;
unsigned had;
unsigned long crc, len;
z_streamp strm = &(state->strm);
/* fill output buffer up to end of deflate stream */
245,8 → 183,8
if (strm->avail_in == 0 && gz_avail(state) == -1)
return -1;
if (strm->avail_in == 0) {
gz_error(state, Z_DATA_ERROR, "unexpected end of file");
return -1;
gz_error(state, Z_BUF_ERROR, "unexpected end of file");
break;
}
/* decompress and handle errors */
267,62 → 205,50
}
} while (strm->avail_out && ret != Z_STREAM_END);
/* update available output and crc check value */
state->have = had - strm->avail_out;
state->next = strm->next_out - state->have;
strm->adler = crc32(strm->adler, state->next, state->have);
/* update available output */
state->x.have = had - strm->avail_out;
state->x.next = strm->next_out - state->x.have;
/* check gzip trailer if at end of deflate stream */
if (ret == Z_STREAM_END) {
if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
gz_error(state, Z_DATA_ERROR, "unexpected end of file");
return -1;
}
if (crc != strm->adler) {
gz_error(state, Z_DATA_ERROR, "incorrect data check");
return -1;
}
if (len != (strm->total_out & 0xffffffffL)) {
gz_error(state, Z_DATA_ERROR, "incorrect length check");
return -1;
}
state->how = LOOK; /* ready for next stream, once have is 0 (leave
state->direct unchanged to remember how) */
}
/* if the gzip stream completed successfully, look for another */
if (ret == Z_STREAM_END)
state->how = LOOK;
/* good decompression */
return 0;
}
/* Make data and put in the output buffer. Assumes that state->have == 0.
/* Fetch data and put it in the output buffer. Assumes state->x.have is 0.
Data is either copied from the input file or decompressed from the input
file depending on state->how. If state->how is LOOK, then a gzip header is
looked for (and skipped if found) to determine wither to copy or decompress.
Returns -1 on error, otherwise 0. gz_make() will leave state->have as COPY
or GZIP unless the end of the input file has been reached and all data has
been processed. */
local int gz_make(state)
looked for to determine whether to copy or decompress. Returns -1 on error,
otherwise 0. gz_fetch() will leave state->how as COPY or GZIP unless the
end of the input file has been reached and all data has been processed. */
local int gz_fetch(state)
gz_statep state;
{
z_streamp strm = &(state->strm);
if (state->how == LOOK) { /* look for gzip header */
if (gz_head(state) == -1)
do {
switch(state->how) {
case LOOK: /* -> LOOK, COPY (only if never GZIP), or GZIP */
if (gz_look(state) == -1)
return -1;
if (state->have) /* got some data from gz_head() */
if (state->how == LOOK)
return 0;
}
if (state->how == COPY) { /* straight copy */
if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
break;
case COPY: /* -> COPY */
if (gz_load(state, state->out, state->size << 1, &(state->x.have))
== -1)
return -1;
state->next = state->out;
}
else if (state->how == GZIP) { /* decompress */
state->x.next = state->out;
return 0;
case GZIP: /* -> GZIP or LOOK (if end of gzip stream) */
strm->avail_out = state->size << 1;
strm->next_out = state->out;
if (gz_decomp(state) == -1)
return -1;
}
} while (state->x.have == 0 && (!state->eof || strm->avail_in));
return 0;
}
336,12 → 262,12
/* skip over len bytes or reach end-of-file, whichever comes first */
while (len)
/* skip over whatever is in output buffer */
if (state->have) {
n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
(unsigned)len : state->have;
state->have -= n;
state->next += n;
state->pos += n;
if (state->x.have) {
n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
(unsigned)len : state->x.have;
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
len -= n;
}
352,7 → 278,7
/* need more data to skip -- load up output buffer */
else {
/* get more output, looking for header if required */
if (gz_make(state) == -1)
if (gz_fetch(state) == -1)
return -1;
}
return 0;
374,14 → 300,15
state = (gz_statep)file;
strm = &(state->strm);
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ || state->err != Z_OK)
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* since an int is returned, make sure len fits in one, otherwise return
with an error (this avoids the flaw in the interface) */
if ((int)len < 0) {
gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
return -1;
}
400,24 → 327,26
got = 0;
do {
/* first just try copying data from the output buffer */
if (state->have) {
n = state->have > len ? len : state->have;
memcpy(buf, state->next, n);
state->next += n;
state->have -= n;
if (state->x.have) {
n = state->x.have > len ? len : state->x.have;
memcpy(buf, state->x.next, n);
state->x.next += n;
state->x.have -= n;
}
/* output buffer empty -- return if we're at the end of the input */
else if (state->eof && strm->avail_in == 0)
else if (state->eof && strm->avail_in == 0) {
state->past = 1; /* tried to read past end */
break;
}
/* need output data -- for small len or new stream load up our output
buffer */
else if (state->how == LOOK || len < (state->size << 1)) {
/* get more output, looking for header if required */
if (gz_make(state) == -1)
if (gz_fetch(state) == -1)
return -1;
continue; /* no progress yet -- go back to memcpy() above */
continue; /* no progress yet -- go back to copy above */
/* the copy above assures that we will leave with space in the
output buffer, allowing at least one gzungetc() to succeed */
}
424,7 → 353,7
/* large len -- read directly into user buffer */
else if (state->how == COPY) { /* read directly */
if (gz_load(state, buf, len, &n) == -1)
if (gz_load(state, (unsigned char *)buf, len, &n) == -1)
return -1;
}
431,11 → 360,11
/* large len -- decompress directly into user buffer */
else { /* state->how == GZIP */
strm->avail_out = len;
strm->next_out = buf;
strm->next_out = (unsigned char *)buf;
if (gz_decomp(state) == -1)
return -1;
n = state->have;
state->have = 0;
n = state->x.have;
state->x.have = 0;
}
/* update progress */
442,7 → 371,7
len -= n;
buf = (char *)buf + n;
got += n;
state->pos += n;
state->x.pos += n;
} while (len);
/* return number of bytes read into user buffer (will fit in int) */
450,6 → 379,11
}
/* -- see zlib.h -- */
#ifdef Z_PREFIX_SET
# undef z_gzgetc
#else
# undef gzgetc
#endif
int ZEXPORT gzgetc(file)
gzFile file;
{
462,15 → 396,16
return -1;
state = (gz_statep)file;
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ || state->err != Z_OK)
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* try output buffer (no need to check for skip request) */
if (state->have) {
state->have--;
state->pos++;
return *(state->next)++;
if (state->x.have) {
state->x.have--;
state->x.pos++;
return *(state->x.next)++;
}
/* nothing there -- try gzread() */
478,6 → 413,12
return ret < 1 ? -1 : buf[0];
}
int ZEXPORT gzgetc_(file)
gzFile file;
{
return gzgetc(file);
}
/* -- see zlib.h -- */
int ZEXPORT gzungetc(c, file)
int c;
490,8 → 431,9
return -1;
state = (gz_statep)file;
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ || state->err != Z_OK)
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return -1;
/* process a skip request */
506,32 → 448,34
return -1;
/* if output buffer empty, put byte at end (allows more pushing) */
if (state->have == 0) {
state->have = 1;
state->next = state->out + (state->size << 1) - 1;
state->next[0] = c;
state->pos--;
if (state->x.have == 0) {
state->x.have = 1;
state->x.next = state->out + (state->size << 1) - 1;
state->x.next[0] = c;
state->x.pos--;
state->past = 0;
return c;
}
/* if no room, give up (must have already done a gzungetc()) */
if (state->have == (state->size << 1)) {
gz_error(state, Z_BUF_ERROR, "out of room to push characters");
if (state->x.have == (state->size << 1)) {
gz_error(state, Z_DATA_ERROR, "out of room to push characters");
return -1;
}
/* slide output data if needed and insert byte before existing data */
if (state->next == state->out) {
unsigned char *src = state->out + state->have;
if (state->x.next == state->out) {
unsigned char *src = state->out + state->x.have;
unsigned char *dest = state->out + (state->size << 1);
while (src > state->out)
*--dest = *--src;
state->next = dest;
state->x.next = dest;
}
state->have++;
state->next--;
state->next[0] = c;
state->pos--;
state->x.have++;
state->x.next--;
state->x.next[0] = c;
state->x.pos--;
state->past = 0;
return c;
}
551,8 → 495,9
return NULL;
state = (gz_statep)file;
/* check that we're reading and that there's no error */
if (state->mode != GZ_READ || state->err != Z_OK)
/* check that we're reading and that there's no (serious) error */
if (state->mode != GZ_READ ||
(state->err != Z_OK && state->err != Z_BUF_ERROR))
return NULL;
/* process a skip request */
569,32 → 514,31
left = (unsigned)len - 1;
if (left) do {
/* assure that something is in the output buffer */
if (state->have == 0) {
if (gz_make(state) == -1)
if (state->x.have == 0 && gz_fetch(state) == -1)
return NULL; /* error */
if (state->have == 0) { /* end of file */
if (buf == str) /* got bupkus */
return NULL;
break; /* got something -- return it */
if (state->x.have == 0) { /* end of file */
state->past = 1; /* read past end */
break; /* return what we have */
}
}
/* look for end-of-line in current output buffer */
n = state->have > left ? left : state->have;
eol = memchr(state->next, '\n', n);
n = state->x.have > left ? left : state->x.have;
eol = (unsigned char *)memchr(state->x.next, '\n', n);
if (eol != NULL)
n = (unsigned)(eol - state->next) + 1;
n = (unsigned)(eol - state->x.next) + 1;
/* copy through end-of-line, or remainder if not found */
memcpy(buf, state->next, n);
state->have -= n;
state->next += n;
state->pos += n;
memcpy(buf, state->x.next, n);
state->x.have -= n;
state->x.next += n;
state->x.pos += n;
left -= n;
buf += n;
} while (left && eol == NULL);
/* found end-of-line or out of space -- terminate string and return it */
/* return terminated string, or if nothing, end of file */
if (buf == str)
return NULL;
buf[0] = 0;
return str;
}
610,16 → 554,12
return 0;
state = (gz_statep)file;
/* check that we're reading */
if (state->mode != GZ_READ)
return 0;
/* if the state is not known, but we can find out, then do so (this is
mainly for right after a gzopen() or gzdopen()) */
if (state->how == LOOK && state->have == 0)
(void)gz_head(state);
if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
(void)gz_look(state);
/* return 1 if reading direct, 0 if decompressing a gzip stream */
/* return 1 if transparent, 0 if processing a gzip stream */
return state->direct;
}
627,7 → 567,7
int ZEXPORT gzclose_r(file)
gzFile file;
{
int ret;
int ret, err;
gz_statep state;
/* get internal structure */
645,9 → 585,10
free(state->out);
free(state->in);
}
err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
gz_error(state, Z_OK, NULL);
free(state->path);
ret = close(state->fd);
free(state);
return ret ? Z_ERRNO : Z_OK;
return ret ? Z_ERRNO : err;
}

/programs/develop/libraries/zlib/gzwrite.c
1,5 → 1,5
/* gzwrite.c -- zlib functions for writing gzip files
* Copyright (C) 2004, 2005, 2010 Mark Adler
* Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
18,13 → 18,18
int ret;
z_streamp strm = &(state->strm);
/* allocate input and output buffers */
state->in = malloc(state->want);
state->out = malloc(state->want);
if (state->in == NULL || state->out == NULL) {
if (state->out != NULL)
free(state->out);
if (state->in != NULL)
/* allocate input buffer */
state->in = (unsigned char *)malloc(state->want);
if (state->in == NULL) {
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
/* only need output buffer and deflate state if compressing */
if (!state->direct) {
/* allocate output buffer */
state->out = (unsigned char *)malloc(state->want);
if (state->out == NULL) {
free(state->in);
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
35,20 → 40,24
strm->zfree = Z_NULL;
strm->opaque = Z_NULL;
ret = deflateInit2(strm, state->level, Z_DEFLATED,
15 + 16, 8, state->strategy);
MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
if (ret != Z_OK) {
free(state->out);
free(state->in);
gz_error(state, Z_MEM_ERROR, "out of memory");
return -1;
}
}
/* mark state as initialized */
state->size = state->want;
/* initialize write buffer */
/* initialize write buffer if compressing */
if (!state->direct) {
strm->avail_out = state->size;
strm->next_out = state->out;
state->next = strm->next_out;
state->x.next = strm->next_out;
}
return 0;
}
55,7 → 64,9
/* Compress whatever is at avail_in and next_in and write to the output file.
Return -1 if there is an error writing to the output file, otherwise 0.
flush is assumed to be a valid deflate() flush value. If flush is Z_FINISH,
then the deflate() state is reset to start a new gzip stream. */
then the deflate() state is reset to start a new gzip stream. If gz->direct
is true, then simply write to the output file without compressing, and
ignore flush. */
local int gz_comp(state, flush)
gz_statep state;
int flush;
68,6 → 79,17
if (state->size == 0 && gz_init(state) == -1)
return -1;
/* write directly if requested */
if (state->direct) {
got = write(state->fd, strm->next_in, strm->avail_in);
if (got < 0 || (unsigned)got != strm->avail_in) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
}
strm->avail_in = 0;
return 0;
}
/* run deflate() on provided input until it produces no more output */
ret = Z_OK;
do {
75,8 → 97,8
doing Z_FINISH then don't write until we get to Z_STREAM_END */
if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
(flush != Z_FINISH || ret == Z_STREAM_END))) {
have = (unsigned)(strm->next_out - state->next);
if (have && ((got = write(state->fd, state->next, have)) < 0 ||
have = (unsigned)(strm->next_out - state->x.next);
if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
(unsigned)got != have)) {
gz_error(state, Z_ERRNO, zstrerror());
return -1;
85,7 → 107,7
strm->avail_out = state->size;
strm->next_out = state->out;
}
state->next = strm->next_out;
state->x.next = strm->next_out;
}
/* compress */
131,7 → 153,7
}
strm->avail_in = n;
strm->next_in = state->in;
state->pos += n;
state->x.pos += n;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return -1;
len -= n;
146,7 → 168,6
unsigned len;
{
unsigned put = len;
unsigned n;
gz_statep state;
z_streamp strm;
163,7 → 184,7
/* since an int is returned, make sure len fits in one, otherwise return
with an error (this avoids the flaw in the interface) */
if ((int)len < 0) {
gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
return 0;
}
186,16 → 207,19
if (len < state->size) {
/* copy to input buffer, compress when full */
do {
unsigned have, copy;
if (strm->avail_in == 0)
strm->next_in = state->in;
n = state->size - strm->avail_in;
if (n > len)
n = len;
memcpy(strm->next_in + strm->avail_in, buf, n);
strm->avail_in += n;
state->pos += n;
buf = (char *)buf + n;
len -= n;
have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
copy = state->size - have;
if (copy > len)
copy = len;
memcpy(state->in + have, buf, copy);
strm->avail_in += copy;
state->x.pos += copy;
buf = (const char *)buf + copy;
len -= copy;
if (len && gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
} while (len);
207,8 → 231,8
/* directly compress user buffer to file */
strm->avail_in = len;
strm->next_in = (voidp)buf;
state->pos += len;
strm->next_in = (z_const Bytef *)buf;
state->x.pos += len;
if (gz_comp(state, Z_NO_FLUSH) == -1)
return 0;
}
222,6 → 246,7
gzFile file;
int c;
{
unsigned have;
unsigned char buf[1];
gz_statep state;
z_streamp strm;
245,19 → 270,23
/* try writing to input buffer for speed (state->size == 0 if buffer not
initialized) */
if (strm->avail_in < state->size) {
if (state->size) {
if (strm->avail_in == 0)
strm->next_in = state->in;
strm->next_in[strm->avail_in++] = c;
state->pos++;
return c;
have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
if (have < state->size) {
state->in[have] = c;
strm->avail_in++;
state->x.pos++;
return c & 0xff;
}
}
/* no room in buffer or not initialized, use gz_write() */
buf[0] = c;
if (gzwrite(file, buf, 1) != 1)
return -1;
return c;
return c & 0xff;
}
/* -- see zlib.h -- */
274,16 → 303,15
return ret == 0 && len != 0 ? -1 : ret;
}
#ifdef STDC
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
#include <stdarg.h>
/* -- see zlib.h -- */
int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
{
int size, len;
gz_statep state;
z_streamp strm;
va_list va;
/* get internal structure */
if (file == NULL)
313,25 → 341,20
/* do the printf() into the input buffer, put length in len */
size = (int)(state->size);
state->in[size - 1] = 0;
va_start(va, format);
#ifdef NO_vsnprintf
# ifdef HAS_vsprintf_void
(void)vsprintf(state->in, format, va);
va_end(va);
(void)vsprintf((char *)(state->in), format, va);
for (len = 0; len < size; len++)
if (state->in[len] == 0) break;
# else
len = vsprintf(state->in, format, va);
va_end(va);
len = vsprintf((char *)(state->in), format, va);
# endif
#else
# ifdef HAS_vsnprintf_void
(void)vsnprintf(state->in, size, format, va);
va_end(va);
len = strlen(state->in);
(void)vsnprintf((char *)(state->in), size, format, va);
len = strlen((char *)(state->in));
# else
len = vsnprintf((char *)(state->in), size, format, va);
va_end(va);
# endif
#endif
342,12 → 365,23
/* update buffer and position, defer compression until needed */
strm->avail_in = (unsigned)len;
strm->next_in = state->in;
state->pos += len;
state->x.pos += len;
return len;
}
#else /* !STDC */
int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
{
va_list va;
int ret;
va_start(va, format);
ret = gzvprintf(file, format, va);
va_end(va);
return ret;
}
#else /* !STDC && !Z_HAVE_STDARG_H */
/* -- see zlib.h -- */
int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
366,6 → 400,10
state = (gz_statep)file;
strm = &(state->strm);
/* check that can really pass pointer in ints */
if (sizeof(int) != sizeof(void *))
return 0;
/* check that we're writing and that there's no error */
if (state->mode != GZ_WRITE || state->err != Z_OK)
return 0;
390,22 → 428,23
state->in[size - 1] = 0;
#ifdef NO_snprintf
# ifdef HAS_sprintf_void
sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
for (len = 0; len < size; len++)
if (state->in[len] == 0) break;
# else
len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
# endif
#else
# ifdef HAS_snprintf_void
snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
len = strlen(state->in);
len = strlen((char *)(state->in));
# else
len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
a19, a20);
# endif
#endif
416,7 → 455,7
/* update buffer and position, defer compression until needed */
strm->avail_in = (unsigned)len;
strm->next_in = state->in;
state->pos += len;
state->x.pos += len;
return len;
}
500,7 → 539,7
int ZEXPORT gzclose_w(file)
gzFile file;
{
int ret = 0;
int ret = Z_OK;
gz_statep state;
/* get internal structure */
515,17 → 554,24
/* check for seek request */
if (state->seek) {
state->seek = 0;
ret += gz_zero(state, state->skip);
if (gz_zero(state, state->skip) == -1)
ret = state->err;
}
/* flush, free memory, and close file */
ret += gz_comp(state, Z_FINISH);
if (gz_comp(state, Z_FINISH) == -1)
ret = state->err;
if (state->size) {
if (!state->direct) {
(void)deflateEnd(&(state->strm));
free(state->out);
}
free(state->in);
}
gz_error(state, Z_OK, NULL);
free(state->path);
ret += close(state->fd);
if (close(state->fd) == -1)
ret = Z_ERRNO;
free(state);
return ret ? Z_ERRNO : Z_OK;
return ret;
}

/programs/develop/libraries/zlib/infback.c
1,5 → 1,5
/* infback.c -- inflate using a call-back interface
* Copyright (C) 1995-2009 Mark Adler
* Copyright (C) 1995-2011 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
42,10 → 42,19
return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
state = (struct inflate_state FAR *)ZALLOC(strm, 1,
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
246,7 → 255,7
void FAR *out_desc;
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
z_const unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
394,7 → 403,6
PULLBYTE();
}
if (here.val < 16) {
NEEDBITS(here.bits);
DROPBITS(here.bits);
state->lens[state->have++] = here.val;
}

/programs/develop/libraries/zlib/inffast.c
1,5 → 1,5
/* inffast.c -- fast decoding
* Copyright (C) 1995-2008, 2010 Mark Adler
* Copyright (C) 1995-2008, 2010, 2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
69,8 → 69,8
unsigned start; /* inflate()'s starting value for strm->avail_out */
{
struct inflate_state FAR *state;
unsigned char FAR *in; /* local strm->next_in */
unsigned char FAR *last; /* while in < last, enough input available */
z_const unsigned char FAR *in; /* local strm->next_in */
z_const unsigned char FAR *last; /* have enough input while in < last */
unsigned char FAR *out; /* local strm->next_out */
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
unsigned char FAR *end; /* while out < end, enough space available */

/programs/develop/libraries/zlib/inffixed.h
2,9 → 2,9
* Generated automatically by makefixed().
*/
/* WARNING: this file should *not* be used by applications. It
is part of the implementation of the compression library and
is subject to change. Applications should only use zlib.h.
/* WARNING: this file should *not* be used by applications.
It is part of the implementation of this library and is
subject to change. Applications should only use zlib.h.
*/
static const code lenfix[512] = {

/programs/develop/libraries/zlib/inflate.c
1,5 → 1,5
/* inflate.c -- zlib decompression
* Copyright (C) 1995-2010 Mark Adler
* Copyright (C) 1995-2012 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
93,14 → 93,15
/* function prototypes */
local void fixedtables OF((struct inflate_state FAR *state));
local int updatewindow OF((z_streamp strm, unsigned out));
local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
unsigned copy));
#ifdef BUILDFIXED
void makefixed OF((void));
#endif
local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
unsigned len));
int ZEXPORT inflateReset(strm)
int ZEXPORT inflateResetKeep(strm)
z_streamp strm;
{
struct inflate_state FAR *state;
109,15 → 110,13
state = (struct inflate_state FAR *)strm->state;
strm->total_in = strm->total_out = state->total = 0;
strm->msg = Z_NULL;
strm->adler = 1; /* to support ill-conceived Java test suite */
if (state->wrap) /* to support ill-conceived Java test suite */
strm->adler = state->wrap & 1;
state->mode = HEAD;
state->last = 0;
state->havedict = 0;
state->dmax = 32768U;
state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
state->wnext = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
127,6 → 126,19
return Z_OK;
}
int ZEXPORT inflateReset(strm)
z_streamp strm;
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
state->wsize = 0;
state->whave = 0;
state->wnext = 0;
return inflateResetKeep(strm);
}
int ZEXPORT inflateReset2(strm, windowBits)
z_streamp strm;
int windowBits;
180,10 → 192,19
if (strm == Z_NULL) return Z_STREAM_ERROR;
strm->msg = Z_NULL; /* in case we return an error */
if (strm->zalloc == (alloc_func)0) {
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zalloc = zcalloc;
strm->opaque = (voidpf)0;
#endif
}
if (strm->zfree == (free_func)0) strm->zfree = zcfree;
if (strm->zfree == (free_func)0)
#ifdef Z_SOLO
return Z_STREAM_ERROR;
#else
strm->zfree = zcfree;
#endif
state = (struct inflate_state FAR *)
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
321,8 → 342,8
low = 0;
for (;;) {
if ((low % 7) == 0) printf("\n ");
printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
state.lencode[low].val);
printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
state.lencode[low].bits, state.lencode[low].val);
if (++low == size) break;
putchar(',');
}
355,12 → 376,13
output will fall in the output data, making match copies simpler and faster.
The advantage may be dependent on the size of the processor's data caches.
*/
local int updatewindow(strm, out)
local int updatewindow(strm, end, copy)
z_streamp strm;
unsigned out;
const Bytef *end;
unsigned copy;
{
struct inflate_state FAR *state;
unsigned copy, dist;
unsigned dist;
state = (struct inflate_state FAR *)strm->state;
380,9 → 402,8
}
/* copy state->wsize or less output bytes into the circular window */
copy = out - strm->avail_out;
if (copy >= state->wsize) {
zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
zmemcpy(state->window, end - state->wsize, state->wsize);
state->wnext = 0;
state->whave = state->wsize;
}
389,10 → 410,10
else {
dist = state->wsize - state->wnext;
if (dist > copy) dist = copy;
zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
zmemcpy(state->window + state->wnext, end - copy, dist);
copy -= dist;
if (copy) {
zmemcpy(state->window, strm->next_out - copy, copy);
zmemcpy(state->window, end - copy, copy);
state->wnext = copy;
state->whave = state->wsize;
}
499,11 → 520,6
bits -= bits & 7; \
} while (0)
/* Reverse the bytes in a 32-bit value */
#define REVERSE(q) \
((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
/*
inflate() uses a state machine to process as much input data and generate as
much output data as possible before returning. The state machine is
591,7 → 607,7
int flush;
{
struct inflate_state FAR *state;
unsigned char FAR *next; /* next input */
z_const unsigned char FAR *next; /* next input */
unsigned char FAR *put; /* next output */
unsigned have, left; /* available input and output */
unsigned long hold; /* bit buffer */
797,7 → 813,7
#endif
case DICTID:
NEEDBITS(32);
strm->adler = state->check = REVERSE(hold);
strm->adler = state->check = ZSWAP32(hold);
INITBITS();
state->mode = DICT;
case DICT:
905,7 → 921,7
while (state->have < 19)
state->lens[order[state->have++]] = 0;
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lencode = (const code FAR *)(state->next);
state->lenbits = 7;
ret = inflate_table(CODES, state->lens, 19, &(state->next),
&(state->lenbits), state->work);
925,7 → 941,6
PULLBYTE();
}
if (here.val < 16) {
NEEDBITS(here.bits);
DROPBITS(here.bits);
state->lens[state->have++] = here.val;
}
980,7 → 995,7
values here (9 and 6) without reading the comments in inftrees.h
concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lencode = (const code FAR *)(state->next);
state->lenbits = 9;
ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
&(state->lenbits), state->work);
989,7 → 1004,7
state->mode = BAD;
break;
}
state->distcode = (code const FAR *)(state->next);
state->distcode = (const code FAR *)(state->next);
state->distbits = 6;
ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
&(state->next), &(state->distbits), state->work);
1170,7 → 1185,7
#ifdef GUNZIP
state->flags ? hold :
#endif
REVERSE(hold)) != state->check) {
ZSWAP32(hold)) != state->check) {
strm->msg = (char *)"incorrect data check";
state->mode = BAD;
break;
1214,8 → 1229,9
*/
inf_leave:
RESTORE();
if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
if (updatewindow(strm, out)) {
if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
(state->mode < CHECK || flush != Z_FINISH)))
if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
state->mode = MEM;
return Z_MEM_ERROR;
}
1249,6 → 1265,29
return Z_OK;
}
int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
z_streamp strm;
Bytef *dictionary;
uInt *dictLength;
{
struct inflate_state FAR *state;
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
/* copy dictionary */
if (state->whave && dictionary != Z_NULL) {
zmemcpy(dictionary, state->window + state->wnext,
state->whave - state->wnext);
zmemcpy(dictionary + state->whave - state->wnext,
state->window, state->wnext);
}
if (dictLength != Z_NULL)
*dictLength = state->whave;
return Z_OK;
}
int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength)
z_streamp strm;
const Bytef *dictionary;
1255,7 → 1294,8
uInt dictLength;
{
struct inflate_state FAR *state;
unsigned long id;
unsigned long dictid;
int ret;
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
1263,29 → 1303,21
if (state->wrap != 0 && state->mode != DICT)
return Z_STREAM_ERROR;
/* check for correct dictionary id */
/* check for correct dictionary identifier */
if (state->mode == DICT) {
id = adler32(0L, Z_NULL, 0);
id = adler32(id, dictionary, dictLength);
if (id != state->check)
dictid = adler32(0L, Z_NULL, 0);
dictid = adler32(dictid, dictionary, dictLength);
if (dictid != state->check)
return Z_DATA_ERROR;
}
/* copy dictionary to window */
if (updatewindow(strm, strm->avail_out)) {
/* copy dictionary to window using updatewindow(), which will amend the
existing dictionary if appropriate */
ret = updatewindow(strm, dictionary + dictLength, dictLength);
if (ret) {
state->mode = MEM;
return Z_MEM_ERROR;
}
if (dictLength > state->wsize) {
zmemcpy(state->window, dictionary + dictLength - state->wsize,
state->wsize);
state->whave = state->wsize;
}
else {
zmemcpy(state->window + state->wsize - dictLength, dictionary,
dictLength);
state->whave = dictLength;
}
state->havedict = 1;
Tracev((stderr, "inflate: dictionary set\n"));
return Z_OK;
1321,7 → 1353,7
*/
local unsigned syncsearch(have, buf, len)
unsigned FAR *have;
unsigned char FAR *buf;
const unsigned char FAR *buf;
unsigned len;
{
unsigned got;
1433,8 → 1465,8
}
/* copy state */
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy(copy, state, sizeof(struct inflate_state));
zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
if (state->lencode >= state->codes &&
state->lencode <= state->codes + ENOUGH - 1) {
copy->lencode = copy->codes + (state->lencode - state->codes);

/programs/develop/libraries/zlib/inftrees.c
1,5 → 1,5
/* inftrees.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2010 Mark Adler
* Copyright (C) 1995-2013 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
9,7 → 9,7
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
" inflate 1.2.8 Copyright 1995-2013 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
62,7 → 62,7
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 78};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
208,8 → 208,8
mask = used - 1; /* mask for comparing low */
/* check available table space */
if ((type == LENS && used >= ENOUGH_LENS) ||
(type == DISTS && used >= ENOUGH_DISTS))
if ((type == LENS && used > ENOUGH_LENS) ||
(type == DISTS && used > ENOUGH_DISTS))
return 1;
/* process all codes and make table entries */
277,8 → 277,8
/* check for enough space */
used += 1U << curr;
if ((type == LENS && used >= ENOUGH_LENS) ||
(type == DISTS && used >= ENOUGH_DISTS))
if ((type == LENS && used > ENOUGH_LENS) ||
(type == DISTS && used > ENOUGH_DISTS))
return 1;
/* point entry in root table to sub-table */
289,40 → 289,16
}
}
/*
Fill in rest of table for incomplete codes. This loop is similar to the
loop above in incrementing huff for table indices. It is assumed that
len is equal to curr + drop, so there is no loop needed to increment
through high index bits. When the current sub-table is filled, the loop
drops back to the root table to fill in any remaining entries there.
*/
/* fill in remaining table entry if code is incomplete (guaranteed to have
at most one remaining entry, since if the code is incomplete, the
maximum code length that was allowed to get this far is one bit) */
if (huff != 0) {
here.op = (unsigned char)64; /* invalid code marker */
here.bits = (unsigned char)(len - drop);
here.val = (unsigned short)0;
while (huff != 0) {
/* when done with sub-table, drop back to root table */
if (drop != 0 && (huff & mask) != low) {
drop = 0;
len = root;
next = *table;
here.bits = (unsigned char)len;
next[huff] = here;
}
/* put invalid code marker in table */
next[huff >> drop] = here;
/* backwards increment the len-bit code huff */
incr = 1U << (len - 1);
while (huff & incr)
incr >>= 1;
if (incr != 0) {
huff &= incr - 1;
huff += incr;
}
else
huff = 0;
}
/* set return parameters */
*table += used;
*bits = root;

/programs/develop/libraries/zlib/trees.c
1,5 → 1,5
/* trees.c -- output deflated data using Huffman coding
* Copyright (C) 1995-2010 Jean-loup Gailly
* Copyright (C) 1995-2012 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
74,11 → 74,6
* probability, to avoid transmitting the lengths for unused bit length codes.
*/
#define Buf_size (8 * 2*sizeof(char))
/* Number of bits used within bi_buf. (bi_buf might be implemented on
* more than 16 bits on some systems.)
*/
/* ===========================================================================
* Local data. These are initialized only once.
*/
151,8 → 146,8
local int build_bl_tree OF((deflate_state *s));
local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
int blcodes));
local void compress_block OF((deflate_state *s, ct_data *ltree,
ct_data *dtree));
local void compress_block OF((deflate_state *s, const ct_data *ltree,
const ct_data *dtree));
local int detect_data_type OF((deflate_state *s));
local unsigned bi_reverse OF((unsigned value, int length));
local void bi_windup OF((deflate_state *s));
399,7 → 394,6
s->bi_buf = 0;
s->bi_valid = 0;
s->last_eob_len = 8; /* enough lookahead for inflate */
#ifdef DEBUG
s->compressed_len = 0L;
s->bits_sent = 0L;
883,15 → 877,17
}
/* ===========================================================================
* Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
*/
void ZLIB_INTERNAL _tr_flush_bits(s)
deflate_state *s;
{
bi_flush(s);
}
/* ===========================================================================
* Send one empty static block to give enough lookahead for inflate.
* This takes 10 bits, of which 7 may remain in the bit buffer.
* The current inflate code requires 9 bits of lookahead. If the
* last two codes for the previous block (real code plus EOB) were coded
* on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
* the last real code. In this case we send two empty static blocks instead
* of one. (There are no problems if the previous block is stored or fixed.)
* To simplify the code, we assume the worst case of last real code encoded
* on one bit only.
*/
void ZLIB_INTERNAL _tr_align(s)
deflate_state *s;
902,21 → 898,7
s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
#endif
bi_flush(s);
/* Of the 10 bits for the empty block, we have already sent
* (10 - bi_valid) bits. The lookahead for the last real code (before
* the EOB of the previous block) was thus at least one plus the length
* of the EOB plus what we have just sent of the empty static block.
*/
if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
send_bits(s, STATIC_TREES<<1, 3);
send_code(s, END_BLOCK, static_ltree);
#ifdef DEBUG
s->compressed_len += 10L;
#endif
bi_flush(s);
}
s->last_eob_len = 7;
}
/* ===========================================================================
* Determine the best encoding for the current block: dynamic trees, static
990,7 → 972,8
} else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
#endif
send_bits(s, (STATIC_TREES<<1)+last, 3);
compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
compress_block(s, (const ct_data *)static_ltree,
(const ct_data *)static_dtree);
#ifdef DEBUG
s->compressed_len += 3 + s->static_len;
#endif
998,7 → 981,8
send_bits(s, (DYN_TREES<<1)+last, 3);
send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
max_blindex+1);
compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
compress_block(s, (const ct_data *)s->dyn_ltree,
(const ct_data *)s->dyn_dtree);
#ifdef DEBUG
s->compressed_len += 3 + s->opt_len;
#endif
1075,8 → 1059,8
*/
local void compress_block(s, ltree, dtree)
deflate_state *s;
ct_data *ltree; /* literal tree */
ct_data *dtree; /* distance tree */
const ct_data *ltree; /* literal tree */
const ct_data *dtree; /* distance tree */
{
unsigned dist; /* distance of matched string */
int lc; /* match length or unmatched char (if dist == 0) */
1118,7 → 1102,6
} while (lx < s->last_lit);
send_code(s, END_BLOCK, ltree);
s->last_eob_len = ltree[END_BLOCK].Len;
}
/* ===========================================================================
1226,7 → 1209,6
int header; /* true if block header must be written */
{
bi_windup(s); /* align on byte boundary */
s->last_eob_len = 8; /* enough lookahead for inflate */
if (header) {
put_short(s, (ush)len);

/programs/develop/libraries/zlib/uncompr.c
30,7 → 30,7
z_stream stream;
int err;
stream.next_in = (Bytef*)source;
stream.next_in = (z_const Bytef *)source;
stream.avail_in = (uInt)sourceLen;
/* Check for source > 64K on 16-bit machine: */
if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;

/programs/develop/libraries/zlib/zconf.h
1,5 → 1,5
/* zconf.h -- configuration of the zlib compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2013 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
15,11 → 15,13
* this permanently in zconf.h using "./configure --zprefix".
*/
#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
# define Z_PREFIX_SET
/* all linked symbols */
# define _dist_code z__dist_code
# define _length_code z__length_code
# define _tr_align z__tr_align
# define _tr_flush_bits z__tr_flush_bits
# define _tr_flush_block z__tr_flush_block
# define _tr_init z__tr_init
# define _tr_stored_block z__tr_stored_block
27,9 → 29,11
# define adler32 z_adler32
# define adler32_combine z_adler32_combine
# define adler32_combine64 z_adler32_combine64
# ifndef Z_SOLO
# define compress z_compress
# define compress2 z_compress2
# define compressBound z_compressBound
# endif
# define crc32 z_crc32
# define crc32_combine z_crc32_combine
# define crc32_combine64 z_crc32_combine64
40,13 → 44,16
# define deflateInit2_ z_deflateInit2_
# define deflateInit_ z_deflateInit_
# define deflateParams z_deflateParams
# define deflatePending z_deflatePending
# define deflatePrime z_deflatePrime
# define deflateReset z_deflateReset
# define deflateResetKeep z_deflateResetKeep
# define deflateSetDictionary z_deflateSetDictionary
# define deflateSetHeader z_deflateSetHeader
# define deflateTune z_deflateTune
# define deflate_copyright z_deflate_copyright
# define get_crc_table z_get_crc_table
# ifndef Z_SOLO
# define gz_error z_gz_error
# define gz_intmax z_gz_intmax
# define gz_strwinerror z_gz_strwinerror
61,12 → 68,17
# define gzerror z_gzerror
# define gzflush z_gzflush
# define gzgetc z_gzgetc
# define gzgetc_ z_gzgetc_
# define gzgets z_gzgets
# define gzoffset z_gzoffset
# define gzoffset64 z_gzoffset64
# define gzopen z_gzopen
# define gzopen64 z_gzopen64
# ifdef _WIN32
# define gzopen_w z_gzopen_w
# endif
# define gzprintf z_gzprintf
# define gzvprintf z_gzvprintf
# define gzputc z_gzputc
# define gzputs z_gzputs
# define gzread z_gzread
78,6 → 90,7
# define gztell64 z_gztell64
# define gzungetc z_gzungetc
# define gzwrite z_gzwrite
# endif
# define inflate z_inflate
# define inflateBack z_inflateBack
# define inflateBackEnd z_inflateBackEnd
92,16 → 105,22
# define inflateReset z_inflateReset
# define inflateReset2 z_inflateReset2
# define inflateSetDictionary z_inflateSetDictionary
# define inflateGetDictionary z_inflateGetDictionary
# define inflateSync z_inflateSync
# define inflateSyncPoint z_inflateSyncPoint
# define inflateUndermine z_inflateUndermine
# define inflateResetKeep z_inflateResetKeep
# define inflate_copyright z_inflate_copyright
# define inflate_fast z_inflate_fast
# define inflate_table z_inflate_table
# ifndef Z_SOLO
# define uncompress z_uncompress
# endif
# define zError z_zError
# ifndef Z_SOLO
# define zcalloc z_zcalloc
# define zcfree z_zcfree
# endif
# define zlibCompileFlags z_zlibCompileFlags
# define zlibVersion z_zlibVersion
111,7 → 130,9
# define alloc_func z_alloc_func
# define charf z_charf
# define free_func z_free_func
# ifndef Z_SOLO
# define gzFile z_gzFile
# endif
# define gz_header z_gz_header
# define gz_headerp z_gz_headerp
# define in_func z_in_func
197,6 → 218,12
# endif
#endif
#if defined(ZLIB_CONST) && !defined(z_const)
# define z_const const
#else
# define z_const
#endif
/* Some Mac compilers merge all .h files incorrectly: */
#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
# define NO_DUMMY_DECL
243,6 → 270,14
# endif
#endif
#ifndef Z_ARG /* function prototypes for stdarg */
# if defined(STDC) || defined(Z_HAVE_STDARG_H)
# define Z_ARG(args) args
# else
# define Z_ARG(args) ()
# endif
#endif
/* The following definitions for FAR are needed only for MSDOS mixed
* model programming (small or medium model with some far allocations).
* This was tested only with MSC; for other MSDOS compilers you may have
356,14 → 391,49
typedef Byte *voidp;
#endif
#if 1 /* was set to #if 1 by ./configure */
#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
# include <limits.h>
# if (UINT_MAX == 0xffffffffUL)
# define Z_U4 unsigned
# elif (ULONG_MAX == 0xffffffffUL)
# define Z_U4 unsigned long
# elif (USHRT_MAX == 0xffffffffUL)
# define Z_U4 unsigned short
# endif
#endif
#ifdef Z_U4
typedef Z_U4 z_crc_t;
#else
typedef unsigned long z_crc_t;
#endif
#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_UNISTD_H
#endif
#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */
# define Z_HAVE_STDARG_H
#endif
#ifdef STDC
# ifndef Z_SOLO
# include <sys/types.h> /* for off_t */
#endif
#endif
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifndef Z_SOLO
# include <stdarg.h> /* for va_list */
# endif
#endif
#ifdef _WIN32
# ifndef Z_SOLO
# include <stddef.h> /* for wchar_t */
# endif
#endif
/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
* "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
* though the former does not conform to the LFS document), but considering
370,12 → 440,16
* both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
* equivalently requesting no 64-bit operations
*/
#if -_LARGEFILE64_SOURCE - -1 == 1
#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
# undef _LARGEFILE64_SOURCE
#endif
#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
# define Z_HAVE_UNISTD_H
#endif
#ifndef Z_SOLO
#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
# include <unistd.h> /* for SEEK_* and off_t */
# include <unistd.h> /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
# ifdef VMS
# include <unixio.h> /* for off_t */
# endif
383,8 → 457,21
# define z_off_t off_t
# endif
#endif
#endif
#ifndef SEEK_SET
#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
# define Z_LFS64
#endif
#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
# define Z_LARGE64
#endif
#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
# define Z_WANT64
#endif
#if !defined(SEEK_SET) && !defined(Z_SOLO)
# define SEEK_SET 0 /* Seek from beginning of file. */
# define SEEK_CUR 1 /* Seek from current position. */
# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
394,20 → 481,16
# define z_off_t long
#endif
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
#if !defined(_WIN32) && defined(Z_LARGE64)
# define z_off64_t off64_t
#else
# if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
# define z_off64_t __int64
# else
# define z_off64_t z_off_t
#endif
#if defined(__OS400__)
# define NO_vsnprintf
#endif
#if defined(__MVS__)
# define NO_vsnprintf
#endif
/* MVS linker does not support external names larger than 8 bytes */
#if defined(__MVS__)
#pragma map(deflateInit_,"DEIN")

/programs/develop/libraries/zlib/zlib.h
1,7 → 1,7
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.5, April 19th, 2010
version 1.2.8, April 28th, 2013
Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
24,8 → 24,8
The data format used by the zlib library is described by RFCs (Request for
Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
(zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
*/
#ifndef ZLIB_H
37,11 → 37,11
extern "C" {
#endif
#define ZLIB_VERSION "1.2.5"
#define ZLIB_VERNUM 0x1250
#define ZLIB_VERSION "1.2.8"
#define ZLIB_VERNUM 0x1280
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
#define ZLIB_VER_REVISION 5
#define ZLIB_VER_REVISION 8
#define ZLIB_VER_SUBREVISION 0
/*
83,15 → 83,15
struct internal_state;
typedef struct z_stream_s {
Bytef *next_in; /* next input byte */
z_const Bytef *next_in; /* next input byte */
uInt avail_in; /* number of bytes available at next_in */
uLong total_in; /* total nb of input bytes read so far */
uLong total_in; /* total number of input bytes read so far */
Bytef *next_out; /* next output byte should be put there */
uInt avail_out; /* remaining free space at next_out */
uLong total_out; /* total nb of bytes output so far */
uLong total_out; /* total number of bytes output so far */
char *msg; /* last error message, NULL if no error */
z_const char *msg; /* last error message, NULL if no error */
struct internal_state FAR *state; /* not visible by applications */
alloc_func zalloc; /* used to allocate the internal state */
327,8 → 327,9
Z_FINISH can be used immediately after deflateInit if all the compression
is to be done in a single step. In this case, avail_out must be at least the
value returned by deflateBound (see below). If deflate does not return
Z_STREAM_END, then it must be called again as described above.
value returned by deflateBound (see below). Then deflate is guaranteed to
return Z_STREAM_END. If not enough output space is provided, deflate will
not return Z_STREAM_END, and it must be called again as described above.
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
451,23 → 452,29
error. However if all decompression is to be performed in a single step (a
single call of inflate), the parameter flush should be set to Z_FINISH. In
this case all pending input is processed and all pending output is flushed;
avail_out must be large enough to hold all the uncompressed data. (The size
of the uncompressed data may have been saved by the compressor for this
purpose.) The next operation on this stream must be inflateEnd to deallocate
the decompression state. The use of Z_FINISH is never required, but can be
used to inform inflate that a faster approach may be used for the single
inflate() call.
avail_out must be large enough to hold all of the uncompressed data for the
operation to complete. (The size of the uncompressed data may have been
saved by the compressor for this purpose.) The use of Z_FINISH is not
required to perform an inflation in one step. However it may be used to
inform inflate that a faster approach can be used for the single inflate()
call. Z_FINISH also informs inflate to not maintain a sliding window if the
stream completes, which reduces inflate's memory footprint. If the stream
does not complete, either because not all of the stream is provided or not
enough output space is provided, then a sliding window will be allocated and
inflate() can be called again to continue the operation as if Z_NO_FLUSH had
been used.
In this implementation, inflate() always flushes as much output as
possible to the output buffer, and always uses the faster approach on the
first call. So the only effect of the flush parameter in this implementation
is on the return value of inflate(), as noted below, or when it returns early
because Z_BLOCK or Z_TREES is used.
first call. So the effects of the flush parameter in this implementation are
on the return value of inflate() as noted below, when inflate() returns early
when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
memory for a sliding window when Z_FINISH is used.
If a preset dictionary is needed after this call (see inflateSetDictionary
below), inflate sets strm->adler to the adler32 checksum of the dictionary
below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
strm->adler to the adler32 checksum of all output produced so far (that is,
strm->adler to the Adler-32 checksum of all output produced so far (that is,
total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
below. At the end of the stream, inflate() checks that its computed adler32
checksum is equal to that saved by the compressor and returns Z_STREAM_END
478,7 → 485,9
initializing with inflateInit2(). Any information contained in the gzip
header is not retained, so applications that need that information should
instead use raw inflate, see inflateInit2() below, or inflateBack() and
perform their own processing of the gzip header and trailer.
perform their own processing of the gzip header and trailer. When processing
gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
producted so far. The CRC-32 is checked against the gzip trailer.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
580,10 → 589,15
uInt dictLength));
/*
Initializes the compression dictionary from the given byte sequence
without producing any compressed output. This function must be called
immediately after deflateInit, deflateInit2 or deflateReset, before any call
of deflate. The compressor and decompressor must use exactly the same
dictionary (see inflateSetDictionary).
without producing any compressed output. When using the zlib format, this
function must be called immediately after deflateInit, deflateInit2 or
deflateReset, and before any call of deflate. When doing raw deflate, this
function must be called either before any call of deflate, or immediately
after the completion of a deflate block, i.e. after all input has been
consumed and all output has been delivered when using any of the flush
options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The
compressor and decompressor must use exactly the same dictionary (see
inflateSetDictionary).
The dictionary should consist of strings (byte sequences) that are likely
to be encountered later in the data to be compressed, with the most commonly
610,8 → 624,8
deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent (for example if deflate has already been called for this stream
or if the compression method is bsort). deflateSetDictionary does not
perform any compression: this will be done by deflate().
or if not at a block boundary for raw deflate). deflateSetDictionary does
not perform any compression: this will be done by deflate().
*/
ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
688,9 → 702,29
deflation of sourceLen bytes. It must be called after deflateInit() or
deflateInit2(), and after deflateSetHeader(), if used. This would be used
to allocate an output buffer for deflation in a single pass, and so would be
called before deflate().
called before deflate(). If that first deflate() call is provided the
sourceLen input bytes, an output buffer allocated to the size returned by
deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
to return Z_STREAM_END. Note that it is possible for the compressed size to
be larger than the value returned by deflateBound() if flush options other
than Z_FINISH or Z_NO_FLUSH are used.
*/
ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
unsigned *pending,
int *bits));
/*
deflatePending() returns the number of bytes and bits of output that have
been generated, but not yet provided in the available output. The bytes not
provided would be due to the available output space having being consumed.
The number of bits of output not provided are between 0 and 7, where they
await more bits to join them in order to fill out a full byte. If pending
or bits are Z_NULL, then those values are not set.
deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
int bits,
int value));
703,8 → 737,9
than or equal to 16, and that many of the least significant bits of value
will be inserted in the output.
deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
source stream state was inconsistent.
*/
ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
790,10 → 825,11
if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
can be determined from the adler32 value returned by that call of inflate.
The compressor and decompressor must use exactly the same dictionary (see
deflateSetDictionary). For raw inflate, this function can be called
immediately after inflateInit2() or inflateReset() and before any call of
inflate() to set the dictionary. The application must insure that the
dictionary that was used for compression is provided.
deflateSetDictionary). For raw inflate, this function can be called at any
time to set the dictionary. If the provided dictionary is smaller than the
window and there is already data in the window, then the provided dictionary
will amend what's there. The application must insure that the dictionary
that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
803,19 → 839,38
inflate().
*/
ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
Bytef *dictionary,
uInt *dictLength));
/*
Returns the sliding dictionary being maintained by inflate. dictLength is
set to the number of bytes in the dictionary, and that many bytes are copied
to dictionary. dictionary must have enough space, where 32768 bytes is
always enough. If inflateGetDictionary() is called with dictionary equal to
Z_NULL, then only the dictionary length is returned, and nothing is copied.
Similary, if dictLength is Z_NULL, then it is not set.
inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
stream state is inconsistent.
*/
ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
/*
Skips invalid compressed data until a full flush point (see above the
description of deflate with Z_FULL_FLUSH) can be found, or until all
Skips invalid compressed data until a possible full flush point (see above
for the description of deflate with Z_FULL_FLUSH) can be found, or until all
available input is skipped. No output is provided.
inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
if no more input was provided, Z_DATA_ERROR if no flush point has been
found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
success case, the application may save the current current value of total_in
which indicates where valid compressed data was found. In the error case,
the application may repeatedly call inflateSync, providing more input each
time, until success or end of the input data.
inflateSync searches for a 00 00 FF FF pattern in the compressed data.
All full flush points have this pattern, but not all occurrences of this
pattern are full flush points.
inflateSync returns Z_OK if a possible full flush point has been found,
Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
In the success case, the application may save the current current value of
total_in which indicates where valid compressed data was found. In the
error case, the application may repeatedly call inflateSync, providing more
input each time, until success or end of the input data.
*/
ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
962,12 → 1017,13
See inflateBack() for the usage of these routines.
inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
the parameters are invalid, Z_MEM_ERROR if the internal state could not be
allocated, or Z_VERSION_ERROR if the version of the library does not match
the version of the header file.
*/
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef unsigned (*in_func) OF((void FAR *,
z_const unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
975,11 → 1031,12
out_func out, void FAR *out_desc));
/*
inflateBack() does a raw inflate with a single call using a call-back
interface for input and output. This is more efficient than inflate() for
file i/o applications in that it avoids copying between the output and the
sliding window by simply making the window itself the output buffer. This
function trusts the application to not change the output buffer passed by
the output function, at least until inflateBack() returns.
interface for input and output. This is potentially more efficient than
inflate() for file i/o applications, in that it avoids copying between the
output and the sliding window by simply making the window itself the output
buffer. inflate() can be faster on modern CPUs when used with large
buffers. inflateBack() trusts the application to not change the output
buffer passed by the output function, at least until inflateBack() returns.
inflateBackInit() must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
1088,6 → 1145,7
27-31: 0 (reserved)
*/
#ifndef Z_SOLO
/* utility functions */
1149,10 → 1207,11
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In
the case where there is not enough room, uncompress() will fill the output
buffer with the uncompressed data up to that point.
*/
/* gzip file access functions */
/*
1162,7 → 1221,7
wrapper, documented in RFC 1952, wrapped around a deflate stream.
*/
typedef voidp gzFile; /* opaque gzip file descriptor */
typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */
/*
ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
1172,13 → 1231,28
a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
for fixed code compression as in "wb9F". (See the description of
deflateInit2 for more information about the strategy parameter.) Also "a"
can be used instead of "w" to request that the gzip stream that will be
written be appended to the file. "+" will result in an error, since reading
and writing to the same gzip file is not supported.
deflateInit2 for more information about the strategy parameter.) 'T' will
request transparent writing or appending with no compression and not using
the gzip format.
"a" can be used instead of "w" to request that the gzip stream that will
be written be appended to the file. "+" will result in an error, since
reading and writing to the same gzip file is not supported. The addition of
"x" when writing will create the file exclusively, which fails if the file
already exists. On systems that support it, the addition of "e" when
reading or writing will set the flag to close the file on an execve() call.
These functions, as well as gzip, will read and decode a sequence of gzip
streams in a file. The append function of gzopen() can be used to create
such a file. (Also see gzflush() for another way to do this.) When
appending, gzopen does not test whether the file begins with a gzip stream,
nor does it look for the end of the gzip streams to begin appending. gzopen
will simply append a gzip stream to the existing file.
gzopen can be used to read a file which is not in gzip format; in this
case gzread will directly read from the file without decompression.
case gzread will directly read from the file without decompression. When
reading, this will be detected automatically by looking for the magic two-
byte gzip header.
gzopen returns NULL if the file could not be opened, if there was
insufficient memory to allocate the gzFile state, or if an invalid mode was
1197,7 → 1271,11
descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
mode);. The duplicated descriptor should be saved to avoid a leak, since
gzdopen does not close fd if it fails.
gzdopen does not close fd if it fails. If you are using fileno() to get the
file descriptor from a FILE *, then you will have to use dup() to avoid
double-close()ing the file descriptor. Both gzclose() and fclose() will
close the associated file descriptor, so they need to have different file
descriptors.
gzdopen returns NULL if there was insufficient memory to allocate the
gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
1235,15 → 1313,27
ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
/*
Reads the given number of uncompressed bytes from the compressed file. If
the input file was not in gzip format, gzread copies the given number of
bytes into the buffer.
the input file is not in gzip format, gzread copies the given number of
bytes into the buffer directly from the file.
After reaching the end of a gzip stream in the input, gzread will continue
to read, looking for another gzip stream, or failing that, reading the rest
of the input file directly without decompression. The entire input file
will be read if gzread is called until it returns less than the requested
len.
to read, looking for another gzip stream. Any number of gzip streams may be
concatenated in the input file, and will all be decompressed by gzread().
If something other than a gzip stream is encountered after a gzip stream,
that remaining trailing garbage is ignored (and no error is returned).
gzread can be used to read a gzip file that is being concurrently written.
Upon reaching the end of the input, gzread will return with the available
data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
gzclearerr can be used to clear the end of file indicator in order to permit
gzread to be tried again. Z_OK indicates that a gzip stream was completed
on the last gzread. Z_BUF_ERROR indicates that the input file ended in the
middle of a gzip stream. Note that gzread does not return -1 in the event
of an incomplete gzip stream. This error is deferred until gzclose(), which
will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
stream. Alternatively, gzerror can be used before gzclose to detect this
case.
gzread returns the number of uncompressed bytes actually read, less than
len for end of file, or -1 for error.
*/
1256,7 → 1346,7
error.
*/
ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
/*
Converts, formats, and writes the arguments to the compressed file under
control of the format string, as in fprintf. gzprintf returns the number of
1301,7 → 1391,10
ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
/*
Reads one byte from the compressed file. gzgetc returns this byte or -1
in case of end of file or error.
in case of end of file or error. This is implemented as a macro for speed.
As such, it does not do all of the checking the other functions do. I.e.
it does not check to see if file is NULL, nor whether the structure file
points to has been clobbered or not.
*/
ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
1397,9 → 1490,7
ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
/*
Returns true (1) if file is being copied directly while reading, or false
(0) if file is a gzip stream being decompressed. This state can change from
false to true while reading the input file if the end of a gzip stream is
reached, but is followed by data that is not another gzip stream.
(0) if file is a gzip stream being decompressed.
If the input file is empty, gzdirect() will return true, since the input
does not contain a gzip stream.
1408,6 → 1499,13
cause buffers to be allocated to allow reading the file to determine if it
is a gzip file. Therefore if gzbuffer() is used, it should be called before
gzdirect().
When writing, gzdirect() returns true (1) if transparent writing was
requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note:
gzdirect() is not needed when writing. Transparent writing must be
explicitly requested, so the application already knows the answer. When
linking statically, using gzdirect() will include all of the zlib code for
gzip file reading and decompression, which may not be desired.)
*/
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
1419,7 → 1517,8
must not be called more than once on the same allocation.
gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
file operation error, or Z_OK on success.
file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
last read ended in the middle of a gzip stream, or Z_OK on success.
*/
ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
1457,6 → 1556,7
file that is being written concurrently.
*/
#endif /* !Z_SOLO */
/* checksum functions */
1492,7 → 1592,9
Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note
that the z_off_t type (like off_t) is a signed integer. If len2 is
negative, the result has no meaning or utility.
*/
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
1499,9 → 1601,8
/*
Update a running CRC-32 with the bytes buf[0..len-1] and return the
updated CRC-32. If buf is Z_NULL, this function returns the required
initial value for the for the crc. Pre- and post-conditioning (one's
complement) is performed within this function so it shouldn't be done by the
application.
initial value for the crc. Pre- and post-conditioning (one's complement) is
performed within this function so it shouldn't be done by the application.
Usage example:
1544,18 → 1645,43
const char *version,
int stream_size));
#define deflateInit(strm, level) \
deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit(strm) \
inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
(strategy), ZLIB_VERSION, sizeof(z_stream))
(strategy), ZLIB_VERSION, (int)sizeof(z_stream))
#define inflateInit2(strm, windowBits) \
inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
(int)sizeof(z_stream))
#define inflateBackInit(strm, windowBits, window) \
inflateBackInit_((strm), (windowBits), (window), \
ZLIB_VERSION, sizeof(z_stream))
ZLIB_VERSION, (int)sizeof(z_stream))
#ifndef Z_SOLO
/* gzgetc() macro and its supporting function and exposed data structure. Note
* that the real internal state is much larger than the exposed structure.
* This abbreviated structure exposes just enough for the gzgetc() macro. The
* user should not mess with these exposed elements, since their names or
* behavior could change in the future, perhaps even capriciously. They can
* only be used by the gzgetc() macro. You have been warned.
*/
struct gzFile_s {
unsigned have;
unsigned char *next;
z_off64_t pos;
};
ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file)); /* backward compatibility */
#ifdef Z_PREFIX_SET
# undef z_gzgetc
# define z_gzgetc(g) \
((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
#else
# define gzgetc(g) \
((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
#endif
/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
* change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
* both are true, the application gets the *64 functions, and the regular
1562,7 → 1688,7
* functions are changed to 64 bits) -- in case these are set on systems
* without large file support, _LFS64_LARGEFILE must also be true
*/
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
#ifdef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
1571,7 → 1697,15
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
#endif
#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
# ifdef Z_PREFIX_SET
# define z_gzopen z_gzopen64
# define z_gzseek z_gzseek64
# define z_gztell z_gztell64
# define z_gzoffset z_gzoffset64
# define z_adler32_combine z_adler32_combine64
# define z_crc32_combine z_crc32_combine64
# else
# define gzopen gzopen64
# define gzseek gzseek64
# define gztell gztell64
1578,7 → 1712,8
# define gzoffset gzoffset64
# define adler32_combine adler32_combine64
# define crc32_combine crc32_combine64
# ifdef _LARGEFILE64_SOURCE
# endif
# ifndef Z_LARGE64
ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
1595,6 → 1730,13
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif
#else /* Z_SOLO */
ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
#endif /* !Z_SOLO */
/* hack for buggy compilers */
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
struct internal_state {int dummy;};
1603,8 → 1745,21
/* undocumented functions */
ZEXTERN const char * ZEXPORT zError OF((int));
ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table OF((void));
ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
ZEXTERN int ZEXPORT inflateResetKeep OF((z_streamp));
ZEXTERN int ZEXPORT deflateResetKeep OF((z_streamp));
#if defined(_WIN32) && !defined(Z_SOLO)
ZEXTERN gzFile ZEXPORT gzopen_w OF((const wchar_t *path,
const char *mode));
#endif
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifndef Z_SOLO
ZEXTERN int ZEXPORTVA gzvprintf Z_ARG((gzFile file,
const char *format,
va_list va));
# endif
#endif
#ifdef __cplusplus
}

/programs/develop/libraries/zlib/zutil.c
1,5 → 1,5
/* zutil.c -- target dependent utility functions for the compression library
* Copyright (C) 1995-2005, 2010 Jean-loup Gailly.
* Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
6,12 → 6,15
/* @(#) $Id$ */
#include "zutil.h"
#ifndef Z_SOLO
# include "gzguts.h"
#endif
#ifndef NO_DUMMY_DECL
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
const char * const z_errmsg[10] = {
z_const char * const z_errmsg[10] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
"", /* Z_OK 0 */
85,7 → 88,7
#ifdef FASTEST
flags += 1L << 21;
#endif
#ifdef STDC
#if defined(STDC) || defined(Z_HAVE_STDARG_H)
# ifdef NO_vsnprintf
flags += 1L << 25;
# ifdef HAS_vsprintf_void
181,6 → 184,7
}
#endif
#ifndef Z_SOLO
#ifdef SYS16BIT
316,3 → 320,5
}
#endif /* MY_ZCALLOC */
#endif /* !Z_SOLO */

/programs/develop/libraries/zlib/zutil.h
1,5 → 1,5
/* zutil.h -- internal interface and configuration of the compression library
* Copyright (C) 1995-2010 Jean-loup Gailly.
* Copyright (C) 1995-2013 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
13,7 → 13,7
#ifndef ZUTIL_H
#define ZUTIL_H
#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
#ifdef HAVE_HIDDEN
# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
#else
# define ZLIB_INTERNAL
21,7 → 21,7
#include "zlib.h"
#ifdef STDC
#if defined(STDC) && !defined(Z_SOLO)
# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
# include <stddef.h>
# endif
29,6 → 29,10
# include <stdlib.h>
#endif
#ifdef Z_SOLO
typedef long ptrdiff_t; /* guess -- will be caught if guess is wrong */
#endif
#ifndef local
# define local static
#endif
40,13 → 44,13
typedef ush FAR ushf;
typedef unsigned long ulg;
extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
/* (size given to avoid silly warnings with Visual C++) */
#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
#define ERR_RETURN(strm,err) \
return (strm->msg = (char*)ERR_MSG(err), (err))
return (strm->msg = ERR_MSG(err), (err))
/* To be used only when the state is known to be valid */
/* common constants */
78,6 → 82,7
#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
# define OS_CODE 0x00
# ifndef Z_SOLO
# if defined(__TURBOC__) || defined(__BORLANDC__)
# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
/* Allow compilation with ANSI keywords only enabled */
90,6 → 95,7
# include <malloc.h>
# endif
#endif
#endif
#ifdef AMIGA
# define OS_CODE 0x01
107,7 → 113,7
#ifdef OS2
# define OS_CODE 0x06
# ifdef M_I86
# if defined(M_I86) && !defined(Z_SOLO)
# include <malloc.h>
# endif
#endif
114,6 → 120,7
#if defined(MACOS) || defined(TARGET_OS_MAC)
# define OS_CODE 0x07
# ifndef Z_SOLO
# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
# include <unix.h> /* for fdopen */
# else
122,6 → 129,7
# endif
# endif
#endif
#endif
#ifdef TOPS20
# define OS_CODE 0x0a
153,7 → 161,7
# endif
#endif
#if defined(__BORLANDC__)
#if defined(__BORLANDC__) && !defined(MSDOS)
#pragma warn -8004
#pragma warn -8008
#pragma warn -8066
160,7 → 168,8
#endif
/* provide prototypes for these when building zlib without LFS */
#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
#if !defined(_WIN32) && \
(!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
#endif
177,42 → 186,7
/* functions */
#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#if defined(__CYGWIN__)
# ifndef HAVE_VSNPRINTF
# define HAVE_VSNPRINTF
# endif
#endif
#ifndef HAVE_VSNPRINTF
# ifdef MSDOS
/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
but for now we just assume it doesn't. */
# define NO_vsnprintf
# endif
# ifdef __TURBOC__
# define NO_vsnprintf
# endif
# ifdef WIN32
/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
# if !defined(vsnprintf) && !defined(NO_vsnprintf)
# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
# define vsnprintf _vsnprintf
# endif
# endif
# endif
# ifdef __SASC
# define NO_vsnprintf
# endif
#endif
#ifdef VMS
# define NO_vsnprintf
#endif
#if defined(pyr)
#if defined(pyr) || defined(Z_SOLO)
# define NO_MEMCPY
#endif
#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
261,10 → 235,11
# define Tracecv(c,x)
#endif
#ifndef Z_SOLO
voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
unsigned size));
void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
#endif
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))
271,4 → 246,8
#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
/* Reverse the bytes in a 32-bit value */
#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
(((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
#endif /* ZUTIL_H */