BlueGreycalmElegant

Català-Valencià – Catalan中文 – Chinese (Simplified)中文 – Chinese (Traditional)Česky – CzechDansk – DanishNederlands – DutchEnglish – EnglishSuomi – FinnishFrançais – FrenchDeutsch – Germanעברית – Hebrewहिंदी – HindiMagyar – HungarianBahasa Indonesia – IndonesianItaliano – Italian日本語 – Japanese한국어 – KoreanМакедонски – Macedonianमराठी – MarathiNorsk – NorwegianPolski – PolishPortuguês – PortuguesePortuguês – Portuguese (Brazil)Русский – RussianSlovenčina – SlovakSlovenščina – SlovenianEspañol – SpanishSvenska – SwedishTürkçe – TurkishУкраїнська – UkrainianOëzbekcha – Uzbek

Compare Revisions

• This comparison shows the changes necessary to convert path

  → /kernel/trunk/network/socket.inc @ 5975

  → /kernel/trunk/network/socket.inc @ 5976

  ↔ Reverse comparison

• Compare Path:	Rev

  With Path:	Rev

Regard whitespace Rev 5975 → Rev 5976

/kernel/trunk/network/socket.inc
31,11 → 31,11
Type dd ? ; RAW/STREAM/DGRAM
Protocol dd ? ; UDP/TCP/ARP/ICMP
errorcode dd ?
device dd ? ; driver pointer, socket pointer if it's an LOCAL socket
device dd ? ; device pointer, paired socket pointer if it's a local socket
options dd ?
state dd ?
backlog dw ? ; how many incoming connections that can be queued
backlog dw ? ; number of incoming connections that can be queued
snd_proc dd ?
rcv_proc dd ?
147,8 → 147,8
struct UDP_SOCKET IP_SOCKET
LocalPort dw ? ; network byte order
RemotePort dw ? ; network byte order
LocalPort dw ? ; in network byte order
RemotePort dw ? ; in network byte order
ends
178,7 → 178,15
ends
struct socket_options
level dd ?
optname dd ?
optlen dd ?
optval dd ?
ends
SOCKETBUFFSIZE = 4096 ; in bytes
SOCKET_QUEUE_SIZE = 10 ; maximum number of incoming packets queued for 1 socket
190,7 → 198,7
net_sockets rd 4
last_socket_num dd ?
last_UDP_port dw ? ; These values give the number of the last used ephemeral port
last_UDP_port dw ? ; last used ephemeral port
last_TCP_port dw ? ;
socket_mutex MUTEX
197,11 → 205,11
endg
;-----------------------------------------------------------------
;
; SOCKET_init
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_init ;
; ;
;-----------------------------------------------------------------;
macro SOCKET_init {
xor eax, eax
232,11 → 240,11
}
;-----------------------------------------------------------------
;
; Socket API (function 74)
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; Sockets API (system function 75) ;
; ;
;-----------------------------------------------------------------;
align 4
sys_socket:
269,16 → 277,19
ret
;-----------------------------------------------------------------
;
; SOCKET_open
;
; IN: domain in ecx
; type in edx
; protocol in esi
; OUT: eax is socket num, -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_open: Create a new socket. ;
; ;
; IN: ecx = domain ;
; edx = type ;
; esi = protocol ;
; ;
; OUT: eax = socket number ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_open:
405,16 → 416,19
ret
;-----------------------------------------------------------------
;
; SOCKET_bind
;
; IN: socket number in ecx
; pointer to sockaddr struct in edx
; length of that struct in esi
; OUT: 0 on success
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_bind: Bind to a local port. ;
; ;
; IN: ecx = socket number ;
; edx = pointer to sockaddr struct ;
; esi = length of sockaddr struct ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_bind:
495,16 → 509,19
;-----------------------------------------------------------------
;
; SOCKET_connect
;
; IN: socket number in ecx
; pointer to sockaddr struct in edx
; length of that struct in esi
; OUT: 0 on success
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_connect: Connect to the remote host. ;
; ;
; IN: ecx = socket number ;
; edx = pointer to sockaddr struct ;
; esi = length of sockaddr struct ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_connect:
553,15 → 570,18
ret
;-----------------------------------------------------------------
;
; SOCKET_listen
;
; IN: socket number in ecx
; backlog in edx
; OUT: eax is socket num, -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_listen: Listen for incoming connections. ;
; ;
; IN: ecx = socket number ;
; edx = backlog in edx ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_listen:
619,16 → 639,19
ret
;-----------------------------------------------------------------
;
; SOCKET_accept
;
; IN: socket number in ecx
; addr in edx
; addrlen in esi
; OUT: eax is socket num, -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_accept: Accept an incoming connection. ;
; ;
; IN: ecx = socket number (of listening socket) ;
; edx = ptr to sockaddr struct ;
; esi = length of sockaddr struct ;
; ;
; OUT: eax = newly created socket num ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_accept:
689,14 → 712,17
mov dword[esp+32], -1
ret
;-----------------------------------------------------------------
;
; SOCKET_close
;
; IN: socket number in ecx
; OUT: eax is socket num, -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_close: Close the socket (and connection). ;
; ;
; IN: ecx = socket number ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_close:
726,7 → 752,6
ret
.tcp:
call TCP_usrclosed
test eax, eax
733,7 → 758,6
jz @f
call TCP_output ; If connection is not closed yet, send the FIN
@@:
ret
743,17 → 767,21
ret
;-----------------------------------------------------------------
;
; SOCKET_receive
;
; IN: socket number in ecx
; addr to buffer in edx
; length of buffer in esi
; flags in edi
; OUT: eax is number of bytes copied, -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_receive: Receive some data from the remote end. ;
; ;
; IN: ecx = socket number ;
; edx = addr to application buffer ;
; edx = length of application buffer ;
; edi = flags ;
; ;
; OUT: eax = number of bytes copied ;
; eax = -1 on error ;
; eax = 0 when socket has been closed by the remote end ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_receive:
777,8 → 805,8
test edi, MSG_DONTWAIT
jnz .return_err
; test [eax + SOCKET.options], SO_NONBLOCK
; jnz .return_err
test [eax + SOCKET.options], SO_NONBLOCK
jnz .return_err
call SOCKET_block
jmp .loop
797,7 → 825,7
.last_data:
test ecx, ecx
jz .return
call SOCKET_notify
call SOCKET_notify ; Call me again!
jmp .return
808,6 → 836,9
DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_receive: DGRAM\n"
test edi, MSG_PEEK
jnz .peek
mov ebx, esi ; bufferlength
get_from_queue (eax + SOCKET_QUEUE_LOCATION), SOCKET_QUEUE_SIZE, sizeof.socket_queue_entry, .wouldblock ; sets esi only on success.
839,7 → 870,11
call NET_BUFF_free
pop ecx eax ; return number of bytes copied to application
xor ebx, ebx
cmp [eax + SOCKET_QUEUE_LOCATION + queue.size], 0
je @f
call SOCKET_notify ; Queue another network event
@@:
xor ebx, ebx ; errorcode = 0 (no error)
ret
.too_small:
853,6 → 888,15
pop ebx
ret
.peek:
xor ebx, ebx
xor ecx, ecx
cmp [eax + SOCKET_QUEUE_LOCATION + queue.size], 0
je @f
mov esi, [eax + SOCKET_QUEUE_LOCATION + queue.r_ptr]
mov ecx, [esi + socket_queue_entry.data_size]
@@:
ret
align 4
916,18 → 960,20
ret
;-----------------------------------------------------------------
;
; SOCKET_send
;
;
; IN: socket number in ecx
; pointer to data in edx
; datalength in esi
; flags in edi
; OUT: -1 on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_send: Send some data to the remote end. ;
; ;
; IN: ecx = socket number ;
; edx = pointer to data ;
; esi = data length ;
; edi = flags ;
; ;
; OUT: eax = number of bytes sent ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_send:
1084,22 → 1130,25
ret
;-----------------------------------------------------------------
;
; SOCKET_get_options
;
; IN: ecx = socket number
; edx = pointer to the options:
; dd level, optname, optval, optlen
; OUT: -1 on error
;
;-----------------------------------------------------------------;
; ;
; SOCKET_get_options: Read a socket option ;
; ;
; IN: ecx = socket number ;
; edx = pointer to socket options struct ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_get_opt:
; FIXME:
; At moment, uses only pseudo-optname -2 for get last_ack_number for TCP.
; TODO: find best way to notify that send()'ed data were acknowledged
; Also pseudo-optname -3 is valid and returns socket state, one of TCPS_*.
;
;-----------------------------------------------------------------
align 4
SOCKET_get_opt:
DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_get_opt\n"
1143,23 → 1192,18
ret
;-----------------------------------------------------------------
;
; SOCKET_set_options
;
; IN: ecx = socket number
; edx = pointer to socket_options
; OUT: -1 on error
;
;-----------------------------------------------------------------
struct socket_options
level dd ?
optname dd ?
optlen dd ?
optval dd ?
ends
;-----------------------------------------------------------------;
; ;
; SOCKET_set_options: Set a socket option. ;
; ;
; IN: ecx = socket number ;
; edx = pointer to socket options struct ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_set_opt:
1226,17 → 1270,18
;-----------------------------------------------------------------
;
; SOCKET_pair
;
; Allocates a pair of linked LOCAL domain sockets
;
; IN: /
; OUT: eax is socket1 num, -1 on error
; ebx is socket2 num
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_pair: Allocate a pair of linked local sockets. ;
; ;
; IN: / ;
; ;
; OUT: eax = socket1 num on success ;
; eax = -1 on error ;
; ebx = socket2 num on success ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_pair:
1297,17 → 1342,18
;-----------------------------------------------------------------
;
; SOCKET_debug
;
; Copies socket variables to application buffer
;
; IN: ecx = socket number
; edx = pointer to buffer
;
; OUT: -1 on error
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_debug: Copy socket variables to application buffer. ;
; ;
; IN: ecx = socket number ;
; edx = pointer to application buffer ;
; ;
; OUT: eax = 0 on success ;
; eax = -1 on error ;
; ebx = errorcode on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_debug:
1350,18 → 1396,27
ret
;-----------------------------------------------------------------
;
; SOCKET_find_port
;
; Fills in the local port number for TCP and UDP sockets
; This procedure always works because the number of sockets is
; limited to a smaller number then the number of possible ports
;
; IN: eax = socket pointer
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ____ ____ ;
; \ / End of sockets API \ / ;
; \/ \/ ;
; () Internally used functions follow () ;
; ;
;-----------------------------------------------------------------;
;-----------------------------------------------------------------;
; ;
; SOCKET_find_port: ;
; Fill in the local port number for TCP and UDP sockets ;
; This procedure always works because the number of sockets is ;
; limited to a smaller number then the number of possible ports ;
; ;
; IN: eax = socket pointer ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_find_port:
1410,19 → 1465,20
;-----------------------------------------------------------------
;
; SOCKET_check_port (to be used with AF_INET only!)
;
; Checks if a local port number is unused
; If the proposed port number is unused, it is filled in in the socket structure
;
; IN: eax = socket ptr (to find out if its a TCP/UDP socket)
; bx = proposed socket number (network byte order)
;
; OUT: ZF = set on error
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_check_port (to be used with AF_INET only!) ;
; ;
; Checks if a local port number is unused ;
; If the proposed port number is unused, it is filled in in the ;
; socket structure ;
; ;
; IN: eax = socket ptr ;
; bx = proposed socket number (network byte order) ;
; ;
; OUT: ZF = set on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_check_port:
1472,22 → 1528,20
;-----------------------------------------------------------------
;
; SOCKET_input
;
; Updates a (stateless) socket with received data
;
; Note: the mutex should already be set !
;
; IN: eax = socket ptr
; ecx = data size
; esi = ptr to data
; [esp] = ptr to buf
;
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_input: Update a (stateless) socket with received data. ;
; ;
; Note: The socket's mutex should already be set ! ;
; ;
; IN: eax = socket ptr ;
; ecx = data size ;
; esi = ptr to data ;
; [esp] = ptr to buf ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_input:
1522,10 → 1576,16
ret
;--------------------------
;
; eax = ptr to ring struct (just a buffer of the right size)
;
;-----------------------------------------------------------------;
; ;
; SOCKET_ring_create: Create a ringbuffer for sockets. ;
; ;
; IN: eax = ptr to ring struct ;
; ;
; OUT: eax = 0 on error ;
; eax = start ptr ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_ring_create:
1561,19 → 1621,17
pop esi
ret
;-----------------------------------------------------------------
;
; SOCKET_ring_write
;
; Adds data to a stream socket, and updates write pointer and size
;
; IN: eax = ptr to ring struct
; ecx = data size
; esi = ptr to data
;
; OUT: ecx = number of bytes stored
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_ring_write: Write data to ring buffer. ;
; ;
; IN: eax = ptr to ring struct ;
; ecx = data size ;
; esi = ptr to data ;
; ;
; OUT: ecx = number of bytes stored ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_ring_write:
1633,22 → 1691,22
ret
;-----------------------------------------------------------------
;
; SOCKET_ring_read
;
; IN: eax = ring struct ptr
; ecx = bytes to read
; edx = offset
; edi = ptr to buffer start
;
; OUT: eax = unchanged
; ecx = number of bytes read (0 on error)
; edx = destroyed
; esi = destroyed
; edi = ptr to buffer end
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_ring_read: Read from ring buffer ;
; ;
; IN: eax = ring struct ptr ;
; ecx = bytes to read ;
; edx = offset ;
; edi = ptr to buffer start ;
; ;
; OUT: eax = unchanged ;
; ecx = number of bytes read (0 on error) ;
; edx = destroyed ;
; esi = destroyed ;
; edi = ptr to buffer end ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_ring_read:
1707,18 → 1765,16
jmp .copy
;-----------------------------------------------------------------
;
; SOCKET_ring_free
;
; Free's some bytes from the ringbuffer
;
; IN: eax = ptr to ring struct
; ecx = data size
;
; OUT: ecx = number of bytes free-ed
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_ring_free: Free data from a ringbuffer ;
; ;
; IN: eax = ptr to ring struct ;
; ecx = data size ;
; ;
; OUT: ecx = number of freed bytes ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_ring_free:
1759,16 → 1815,15
ret
;-----------------------------------------------------------------
;
; SOCKET_block
;
; Suspends the thread attached to a socket
;
; IN: eax = socket ptr
; OUT: eax = unchanged
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_block: Suspend the thread attached to a socket. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: eax = unchanged ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_block:
1802,16 → 1857,15
ret
;-----------------------------------------------------------------
;
; SOCKET_notify
;
; notify's the owner of a socket that something happened
;
; IN: eax = socket ptr
; OUT: eax = unchanged
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_notify: Wake up socket owner thread. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: eax = unchanged ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_notify:
1850,7 → 1904,7
test [eax + SOCKET.state], SS_BLOCKED
jnz .un_block
; socket and thread exists and socket is of non blocking type.
; Socket and thread exists and socket is of non blocking type.
; We'll try to flag an event to the thread.
shl ecx, 8
or [ecx + SLOT_BASE + APPDATA.event_mask], EVENT_NETWORK
1861,7 → 1915,7
.un_block:
; socket and thread exists and socket is of blocking type
; Socket and thread exists and socket is of blocking type
; We'll try to unblock it.
and [eax + SOCKET.state], not SS_BLOCKED ; Clear the 'socket is blocked' flag
mov [esi + TASKDATA.state], 0 ; Run the thread
1871,19 → 1925,20
ret
;--------------------------------------------------------------------
;
; SOCKET_alloc
;
; Allocate memory for socket data and put new socket into the list
; Newly created socket is initialized with calling PID and number and
; put into beginning of list (which is the fastest way).
;
; IN: /
; OUT: eax = 0 on error, socket ptr otherwise
; edi = socket number
;
;--------------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_alloc: ;
; Allocate memory for socket and put new socket into the list. ;
; Newly created socket is initialized with calling PID and socket ;
; number. ;
; ;
; IN: / ;
; ;
; OUT: eax = socket ptr on success ;
; eax = 0 on error ;
; edi = socket number on success ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_alloc:
1988,17 → 2043,17
ret
;----------------------------------------------------
;
; SOCKET_free
;
; Free socket data memory and remove socket from the list
; Caller should lock and unlock socket_mutex
;
; IN: eax = socket ptr
; OUT: /
;
;----------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_free: ;
; Free socket data memory and remove socket from the list. ;
; Caller should lock and unlock socket_mutex. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_free:
2056,20 → 2111,20
.error1:
pop ebx
DEBUGF DEBUG_NETWORK_ERROR, "Error in socket free!\n"
DEBUGF DEBUG_NETWORK_ERROR, "SOCKET_free: error!\n"
DEBUGF DEBUG_NETWORK_ERROR, "socket ptr=0x%x caller=0x%x\n", eax, [esp]
ret
;------------------------------------
;
; SOCKET_fork
;
; Create a child socket
;
; IN: socket nr in ebx
; OUT: child socket nr in eax
;
;-----------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_fork: Create a child socket. ;
; ;
; IN: ebx = socket number ;
; ;
; OUT: eax = child socket number on success ;
; eax = 0 on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_fork:
2118,16 → 2173,16
ret
;---------------------------------------------------
;
; SOCKET_num_to_ptr
;
; Get socket structure address by its number
;
; IN: ecx = socket number
; OUT: eax = 0 on error, socket ptr otherwise
;
;---------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_num_to_ptr: Get socket structure address by its number. ;
; ;
; IN: ecx = socket number ;
; ;
; OUT: eax = socket ptr ;
; eax = 0 on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_num_to_ptr:
2165,17 → 2220,17
ret
;---------------------------------------------------
;
; SOCKET_ptr_to_num
;
; Get socket number by its address
;
; IN: eax = socket ptr
; OUT: eax = 0 on error, socket num otherwise
; ZF = set on error
;
;---------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_ptr_to_num: Get socket number by its address. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: eax = socket number ;
; eax = 0 on error ;
; ZF = set on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_ptr_to_num:
2194,17 → 2249,16
ret
;---------------------------------------------------
;
; SOCKET_check
;
; checks if the given value is really a socket ptr
;
; IN: eax = socket ptr
; OUT: eax = 0 on error, unchanged otherwise
; ZF = set on error
;
;---------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_check: Checks if the given ptr is really a socket ptr. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: eax = 0 on error ;
; ZF = set on error ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_check:
2229,22 → 2283,21
ret
.error:
DEBUGF DEBUG_NETWORK_ERROR, "Socket_check called with argument 0\n"
DEBUGF DEBUG_NETWORK_ERROR, "SOCKET_check: called with argument 0\n"
DEBUGF DEBUG_NETWORK_ERROR, "stack: 0x%x, 0x%x, 0x%x\n", [esp], [esp+4], [esp+8]
ret
;---------------------------------------------------
;
; SOCKET_check_owner
;
; checks if the caller application owns the socket
;
; IN: eax = socket ptr
; OUT: ZF = true/false
;
;---------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_check_owner: Check if the caller app owns the socket. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: ZF = true/false ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_check_owner:
2261,18 → 2314,18
;------------------------------------------------------
;
; SOCKET_process_end
;
; Kernel calls this function when a certain process ends
; This function will check if the process had any open sockets
; And update them accordingly (clean up)
;
; IN: edx = pid
; OUT: /
;
;------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_process_end: ;
; Kernel calls this function when a certain process ends. ;
; This function will check if the process had any open sockets, ;
; and update them accordingly (clean up). ;
; ;
; IN: edx = pid ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_process_end:
2339,15 → 2392,15
;-----------------------------------------------------------------
;
; SOCKET_is_connecting
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_is_connecting: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_is_connecting:
2355,20 → 2408,19
and [eax + SOCKET.state], not (SS_ISCONNECTED + SS_ISDISCONNECTING + SS_ISCONFIRMING)
or [eax + SOCKET.state], SS_ISCONNECTING
ret
;-----------------------------------------------------------------
;
; SOCKET_is_connected
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_is_connected: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_is_connected:
2376,21 → 2428,20
and [eax + SOCKET.state], not (SS_ISCONNECTING + SS_ISDISCONNECTING + SS_ISCONFIRMING)
or [eax + SOCKET.state], SS_ISCONNECTED
jmp SOCKET_notify
;-----------------------------------------------------------------
;
; SOCKET_is_disconnecting
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_is_disconnecting: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_is_disconnecting:
2398,20 → 2449,19
and [eax + SOCKET.state], not (SS_ISCONNECTING)
or [eax + SOCKET.state], SS_ISDISCONNECTING + SS_CANTRCVMORE + SS_CANTSENDMORE
jmp SOCKET_notify
;-----------------------------------------------------------------
;
; SOCKET_is_disconnected
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_is_disconnected: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_is_disconnected:
2419,21 → 2469,19
and [eax + SOCKET.state], not (SS_ISCONNECTING + SS_ISCONNECTED + SS_ISDISCONNECTING)
or [eax + SOCKET.state], SS_CANTRCVMORE + SS_CANTSENDMORE
jmp SOCKET_notify
;-----------------------------------------------------------------
;
; SOCKET_cant_recv_more
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_cant_recv_more: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_cant_recv_more:
2440,22 → 2488,19
DEBUGF DEBUG_NETWORK_VERBOSE, "SOCKET_cant_recv_more: %x\n", eax
or [eax + SOCKET.state], SS_CANTRCVMORE
jmp SOCKET_notify
call SOCKET_notify
ret
;-----------------------------------------------------------------
;
; SOCKET_cant_send_more
;
; IN: eax = socket ptr
; OUT: /
;
;-----------------------------------------------------------------
;-----------------------------------------------------------------;
; ;
; SOCKET_cant_send_more: Update socket state. ;
; ;
; IN: eax = socket ptr ;
; ;
; OUT: / ;
; ;
;-----------------------------------------------------------------;
align 4
SOCKET_cant_send_more:
2463,11 → 2508,8
or [eax + SOCKET.state], SS_CANTSENDMORE
mov [eax + SOCKET.snd_proc], .notconn
jmp SOCKET_notify
call SOCKET_notify
ret
.notconn:
mov dword[esp+20], ENOTCONN
mov dword[esp+32], -1