| 19,14 → 19,14 |
|---|
| |
| format MS COFF |
| |
| API_VERSION equ 0x01000100 |
| DRIVER_VERSION equ 5 |
| API_VERSION = 0x01000100 |
| DRIVER_VERSION = 5 |
| |
| MAX_DEVICES equ 16 |
| MAX_DEVICES = 16 |
| |
| DEBUG equ 1 |
| __DEBUG__ equ 1 |
| __DEBUG_LEVEL__ equ 1 |
| DEBUG = 1 |
| __DEBUG__ = 1 |
| __DEBUG_LEVEL__ = 1 |
| |
| include 'proc32.inc' |
| include 'imports.inc' |
| 109,46 → 109,46 |
|---|
| |
| ; Serial EEPROM |
| |
| EE_SK equ 1 shl 16 ; serial clock |
| EE_CS equ 1 shl 17 ; chip select |
| EE_DI equ 1 shl 18 ; data in |
| EE_DO equ 1 shl 19 ; data out |
| EE_SK = 1 shl 16 ; serial clock |
| EE_CS = 1 shl 17 ; chip select |
| EE_DI = 1 shl 18 ; data in |
| EE_DO = 1 shl 19 ; data out |
| |
| EE_READ equ 110b |
| EE_WRITE equ 101b |
| EE_ERASE equ 111b |
| EE_READ = 110b |
| EE_WRITE = 101b |
| EE_ERASE = 111b |
| |
| ; The SCB accepts the following controls for the Tx and Rx units: |
| |
| CU_START equ 0x0010 |
| CU_RESUME equ 0x0020 |
| CU_STATSADDR equ 0x0040 |
| CU_SHOWSTATS equ 0x0050 ; Dump statistics counters. |
| CU_CMD_BASE equ 0x0060 ; Base address to add to add CU commands. |
| CU_DUMPSTATS equ 0x0070 ; Dump then reset stats counters. |
| CU_START = 0x0010 |
| CU_RESUME = 0x0020 |
| CU_STATSADDR = 0x0040 |
| CU_SHOWSTATS = 0x0050 ; Dump statistics counters. |
| CU_CMD_BASE = 0x0060 ; Base address to add to add CU commands. |
| CU_DUMPSTATS = 0x0070 ; Dump then reset stats counters. |
| |
| RX_START equ 0x0001 |
| RX_RESUME equ 0x0002 |
| RX_ABORT equ 0x0004 |
| RX_ADDR_LOAD equ 0x0006 |
| RX_RESUMENR equ 0x0007 |
| INT_MASK equ 0x0100 |
| DRVR_INT equ 0x0200 ; Driver generated interrupt |
| RX_START = 0x0001 |
| RX_RESUME = 0x0002 |
| RX_ABORT = 0x0004 |
| RX_ADDR_LOAD = 0x0006 |
| RX_RESUMENR = 0x0007 |
| INT_MASK = 0x0100 |
| DRVR_INT = 0x0200 ; Driver generated interrupt |
| |
| CmdIASetup equ 0x0001 |
| CmdConfigure equ 0x0002 |
| CmdTx equ 0x0004 ;;;; |
| CmdTxFlex equ 0x0008 ;;; |
| Cmdsuspend equ 0x4000 |
| CmdIASetup = 0x0001 |
| CmdConfigure = 0x0002 |
| CmdTx = 0x0004 ;;;; |
| CmdTxFlex = 0x0008 ;;; |
| Cmdsuspend = 0x4000 |
| |
| |
| reg_scb_status equ 0 |
| reg_scb_cmd equ 2 |
| reg_scb_ptr equ 4 |
| reg_port equ 8 |
| reg_eeprom_ctrl equ 12 |
| reg_eeprom equ 14 |
| reg_mdi_ctrl equ 16 |
| reg_scb_status = 0 |
| reg_scb_cmd = 2 |
| reg_scb_ptr = 4 |
| reg_port = 8 |
| reg_eeprom_ctrl = 12 |
| reg_eeprom = 14 |
| reg_mdi_ctrl = 16 |
| |
| |
| macro delay { |