BlueGreycalmElegant

Català-Valencià – Catalan中文 – Chinese (Simplified)中文 – Chinese (Traditional)Česky – CzechDansk – DanishNederlands – DutchEnglish – EnglishSuomi – FinnishFrançais – FrenchDeutsch – Germanעברית – Hebrewहिंदी – HindiMagyar – HungarianBahasa Indonesia – IndonesianItaliano – Italian日本語 – Japanese한국어 – KoreanМакедонски – Macedonianमराठी – MarathiNorsk – NorwegianPolski – PolishPortuguês – PortuguesePortuguês – Portuguese (Brazil)Русский – RussianSlovenčina – SlovakSlovenščina – SlovenianEspañol – SpanishSvenska – SwedishTürkçe – TurkishУкраїнська – UkrainianOëzbekcha – Uzbek

Compare Revisions

• This comparison shows the changes necessary to convert path

  → /kernel/tags/kolibri0.6.0.0/fs @ 147

  → /kernel/tags/kolibri0.6.0.0/fs @ 148

  ↔ Reverse comparison

• Compare Path:	Rev

  With Path:	Rev

Regard whitespace Rev 147 → Rev 148

/kernel/tags/kolibri0.6.0.0/fs/fs.inc
0,0 → 1,939
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; System service for filesystem call ;;
;; (C) 2004 Ville Turjanmaa, License: GPL ;;
;; 29.04.2006 Elimination of hangup after the ;;
;; expiration hd_wait_timeout (for LBA) - Mario79 ;;
;; xx.04.2006 LFN support - diamond ;;
;; 15.01.2005 get file size/attr/date, file_append (only for hd) - ATV ;;
;; 23.11.2004 test if hd/partition is set - ATV ;;
;; 18.11.2004 get_disk_info and more error codes - ATV ;;
;; 08.11.2004 expand_pathz and rename (only for hd) - ATV ;;
;; 20.10.2004 Makedir/Removedir (only for hd) - ATV ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
iglobal
dir0: db 'HARDDISK '
db 'RAMDISK '
db 'FLOPPYDISK '
db 0
dir1: db 'FIRST '
db 'SECOND '
db 'THIRD '
db 'FOURTH '
db 0
not_select_IDE db 0
hd_address_table: dd 0x1f0,0x00,0x1f0,0x10
dd 0x170,0x00,0x170,0x10
endg
file_system:
; IN:
;
; eax = 0 ; read file /RamDisk/First 6
; eax = 1 ; write file /RamDisk/First 33 /HardDisk/First 56
; eax = 2 ; delete file /RamDisk/First 32
; eax = 4 ; makedir
; eax = 5 ; rename file/directory
; eax = 8 ; lba read
; eax = 15 ; get_disk_info
;
; OUT:
;
; eax = 0 : read ok
; eax = 1 : no hd base and/or partition defined
; eax = 2 : function is unsupported for this FS
; eax = 3 : unknown FS
; eax = 4 : partition not defined at hd
; eax = 5 : file not found
; eax = 6 : end of file
; eax = 7 : memory pointer not in application area
; eax = 8 : disk full
; eax = 9 : fat table corrupted
; eax = 10 : access denied
; eax = 11 : disk error
;
; ebx = size
; \begin{diamond}[18.03.2006]
; for subfunction 16 (start application) error codes must be negative
; because positive values are valid PIDs
; so possible return values are:
; eax > 0 : process created, eax=PID
; -0x10 <= eax < 0 : -eax is filesystem error code:
; eax = -1 = 0xFFFFFFFF : no hd base and/or partition defined
; eax = -3 = 0xFFFFFFFD : unknown FS
; eax = -5 = 0xFFFFFFFB : file not found
; eax = -6 = 0xFFFFFFFA : unexpected end of file (probably not executable file)
; eax = -9 = 0xFFFFFFF7 : fat table corrupted
; eax = -10 = 0xFFFFFFF6 : access denied
; -0x20 <= eax < -0x10: eax is process creation error code:
; eax = -0x20 = 0xFFFFFFE0 : too many processes
; eax = -0x1F = 0xFFFFFFE1 : not Menuet/Kolibri executable
; eax = -0x1E = 0xFFFFFFE2 : no memory
; ebx is not changed
; \end{diamond}[18.03.2006]
; Extract parameters
add eax, std_application_base_address ; abs start of info block
cmp dword [eax+0],15 ; GET_DISK_INFO
je fs_info
cmp dword [eax+0],5 ; RENAME - dont care about read&write blocks
je fs_read
cmp dword [eax+0],4 ; MAKEDIR - dont care about read&write blocks
je fs_read
cmp dword [eax+0],2 ; DELETE - dont care about read&write blocks
je fs_read
cmp dword [0x3000],1 ; no memory checks for kernel requests
jz no_checks_for_kernel
mov edx,eax
cmp dword [eax+0],1
jnz .usual_check
mov ebx,[eax+12]
add ebx,std_application_base_address
mov ecx,[eax+8]
call check_region
test eax,eax
jnz area_in_app_mem
.error_output:
mov esi,buffer_failed
call sys_msg_board_str
; mov eax,7
mov dword [esp+36],7
ret
iglobal
buffer_failed db 'K : Buffer check failed',13,10,0
endg
.usual_check:
cmp dword [eax+0],0
mov ecx,512
jnz .small_size
mov ecx,[eax+8]
shl ecx,9
.small_size:
mov ebx,[eax+12]
add ebx,std_application_base_address
call check_region
test eax,eax
jz .error_output
area_in_app_mem:
mov eax,edx
no_checks_for_kernel:
fs_read:
mov ebx,[eax+20] ; program wants root directory ?
test bl,bl
je fs_getroot
test bh,bh
jne fs_noroot
fs_getroot:
; \begin{diamond}[18.03.2006]
; root - only read is allowed
; other operations return "access denied", eax=10
; (execute operation returns eax=-10)
cmp dword [eax], 0
jz .read_root
mov dword [esp+36], 10
ret
.read_root:
; \end{diamond}[18.03.2006]
mov esi,dir0
mov edi,[eax+12]
add edi,std_application_base_address
mov ecx,11
push ecx
; cld ; already is
rep movsb
mov al,0x10
stosb
add edi,32-11-1
pop ecx
rep movsb
stosb
and dword [esp+36],0 ; ok read
mov dword [esp+24],32*2 ; size of root
ret
fs_info: ;start of code - Mihasik
push eax
cmp [eax+21],byte 'h'
je fs_info_h
cmp [eax+21],byte 'H'
je fs_info_h
cmp [eax+21],byte 'r'
je fs_info_r
cmp [eax+21],byte 'R'
je fs_info_r
mov eax,3 ;if unknown disk
xor ebx,ebx
xor ecx,ecx
xor edx,edx
jmp fs_info1
fs_info_r:
call ramdisk_free_space ;if ramdisk
mov ecx,edi ;free space in ecx
shr ecx,9 ;free clusters
mov ebx,2847 ;total clusters
mov edx,512 ;cluster size
xor eax,eax ;always 0
jmp fs_info1
fs_info_h: ;if harddisk
call get_hd_info
fs_info1:
pop edi
mov [esp+36],eax
mov [esp+24],ebx ; total clusters on disk
mov [esp+32],ecx ; free clusters on disk
mov [edi],edx ; cluster size in bytes
ret ;end of code - Mihasik
fs_noroot:
push dword [eax+0] ; read/write/delete/.../makedir/rename/lba/run
push dword [eax+4] ; 512 block number to read
push dword [eax+8] ; bytes to write/append or 512 blocks to read
mov ebx,[eax+12]
add ebx,std_application_base_address
push ebx ; abs start of return/save area
lea esi,[eax+20] ; abs start of dir + filename
mov edi,[eax+16]
add edi,std_application_base_address ; abs start of work area
call expand_pathz
push edi ; dir start
push ebx ; name of file start
mov eax,[edi+1]
cmp eax,'RD '
je fs_yesramdisk
cmp eax,'RAMD'
jne fs_noramdisk
fs_yesramdisk:
cmp byte [edi+1+11],0
je fs_give_dir1
mov eax,[edi+1+12]
cmp eax,'1 '
je fs_yesramdisk_first
cmp eax,'FIRS'
jne fs_noramdisk
fs_yesramdisk_first:
cmp dword [esp+20],8 ; LBA read ramdisk
jne fs_no_LBA_read_ramdisk
mov eax,[esp+16] ; LBA block to read
mov ecx,[esp+8] ; abs pointer to return area
call LBA_read_ramdisk
jmp file_system_return
fs_no_LBA_read_ramdisk:
cmp dword [esp+20],0 ; READ
jne fs_noramdisk_read
mov eax,[esp+4] ; fname
add eax,2*12+1
mov ebx,[esp+16] ; block start
inc ebx
mov ecx,[esp+12] ; block count
mov edx,[esp+8] ; return
mov esi,[esp+0]
sub esi,eax
add esi,12+1 ; file name length
call fileread
jmp file_system_return
fs_noramdisk_read:
cmp dword [esp+20],1 ; WRITE
jne fs_noramdisk_write
mov eax,[esp+4] ; fname
add eax,2*12+1
mov ebx,[esp+8] ; buffer
mov ecx,[esp+12] ; count to write
mov edx,0 ; create new
call filesave
; eax=0 ok - eax=1 not enough free space
jmp file_system_return
fs_noramdisk_write:
cmp dword [esp+20],2 ;DELETE
jne fs_noramdisk_delete
mov eax,[esp+4] ; fname
add eax,2*12+1
call filedelete
jmp file_system_return
fs_noramdisk_delete:
fs_noramdisk:
;********************************************************************
mov eax,[edi+1]
cmp eax,'FD '
je fs_yesflpdisk
cmp eax,'FLOP'
jne fs_noflpdisk
fs_yesflpdisk:
call reserve_flp
cmp byte [edi+1+11],0
je fs_give_dir1
mov eax,[edi+1+12]
cmp eax,'1 '
je fs_yesflpdisk_first
cmp eax,'FIRS'
je fs_yesflpdisk_first
cmp eax,'2 '
je fs_yesflpdisk_second
cmp eax,'SECO'
jne fs_noflpdisk
jmp fs_yesflpdisk_second
fs_yesflpdisk_first:
mov [flp_number],1
jmp fs_yesflpdisk_start
fs_yesflpdisk_second:
mov [flp_number],2
fs_yesflpdisk_start:
cmp dword [esp+20],0 ; READ
jne fs_noflpdisk_read
mov eax,[esp+4] ; fname
add eax,2*12+1
mov ebx,[esp+16] ; block start
inc ebx
mov ecx,[esp+12] ; block count
mov edx,[esp+8] ; return
mov esi,[esp+0]
sub esi,eax
add esi,12+1 ; file name length
call floppy_fileread
jmp file_system_return
fs_noflpdisk_read:
cmp dword [esp+20],1 ; WRITE
jne fs_noflpdisk_write
mov eax,[esp+4] ; fname
add eax,2*12+1
mov ebx,[esp+8] ; buffer
mov ecx,[esp+12] ; count to write
mov edx,0 ; create new
call floppy_filesave
; eax=0 ok - eax=1 not enough free space
jmp file_system_return
fs_noflpdisk_write:
cmp dword [esp+20],2 ; DELETE
jne fs_noflpdisk_delete
mov eax,[esp+4] ; fname
add eax,2*12+1
call floppy_filedelete
mov [flp_status],0
jmp file_system_return
fs_noflpdisk_delete:
fs_noflpdisk:
;*****************************************************************
mov eax,[edi+1]
cmp eax,'HD0 '
je fs_yesharddisk_IDE0
cmp eax,'HD1 '
je fs_yesharddisk_IDE1
cmp eax,'HD2 '
je fs_yesharddisk_IDE2
cmp eax,'HD3 '
je fs_yesharddisk_IDE3
jmp old_path_harddisk
fs_yesharddisk_IDE0:
call reserve_hd1
mov [hdbase],0x1f0
mov [hdid],0x0
mov [hdpos],1
jmp fs_yesharddisk_partition
fs_yesharddisk_IDE1:
call reserve_hd1
mov [hdbase],0x1f0
mov [hdid],0x10
mov [hdpos],2
jmp fs_yesharddisk_partition
fs_yesharddisk_IDE2:
call reserve_hd1
mov [hdbase],0x170
mov [hdid],0x0
mov [hdpos],3
jmp fs_yesharddisk_partition
fs_yesharddisk_IDE3:
call reserve_hd1
mov [hdbase],0x170
mov [hdid],0x10
mov [hdpos],4
fs_yesharddisk_partition:
; call choice_necessity_partition
; jmp fs_yesharddisk_all
jmp fs_for_new_semantic
choice_necessity_partition:
mov eax,[edi+1+12]
call StringToNumber
mov [fat32part],eax
choice_necessity_partition_1:
mov ecx,[hdpos]
xor eax,eax
mov [0xfe10], eax ; entries in hd cache
mov edx,0x40002
search_partition_array:
mov bl,[edx]
movzx ebx,bl
add eax,ebx
inc edx
loop search_partition_array
sub eax,ebx
add eax,[fat32part]
dec eax
xor edx,edx
imul eax,100
add eax,0x4000a
mov [transfer_adress],eax
call partition_data_transfer_1
ret
old_path_harddisk:
mov eax,[edi+1]
cmp eax,'HD '
je fs_yesharddisk
cmp eax,'HARD'
jne fs_noharddisk
fs_yesharddisk:
cmp dword [esp+20],8 ; LBA read
jne fs_no_LBA_read
mov eax,[esp+16] ; LBA block to read
lea ebx,[edi+1+12] ; pointer to FIRST/SECOND/THIRD/FOURTH
mov ecx,[esp+8] ; abs pointer to return area
call LBA_read
jmp file_system_return
fs_no_LBA_read:
cmp byte [edi+1+11],0 ; directory read
je fs_give_dir1
call reserve_hd1
fs_for_new_semantic:
call choice_necessity_partition
fs_yesharddisk_all:
mov eax,1
mov ebx, [esp+24+24]
cmp [hdpos],0 ; is hd base set?
jz hd_err_return
cmp [fat32part],0 ; is partition set?
jnz @f
hd_err_return:
and [hd1_status], 0
jmp file_system_return
@@:
cmp dword [esp+20],0 ; READ
jne fs_noharddisk_read
mov eax,[esp+0] ; /fname
lea edi,[eax+12]
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov ebx,[esp+12] ; count to read
mov ecx,[esp+8] ; buffer
mov edx,[esp+4]
add edx,12*2 ; dir start
sub edi,edx ; path length
mov esi,[esp+16] ; blocks to read
call file_read
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_noharddisk_read:
cmp dword [esp+20],1 ; WRITE
jne fs_noharddisk_write
mov eax,[esp+0] ; /fname
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov ebx,[esp+12] ; count to write
mov ecx,[esp+8] ; buffer
mov edx,[esp+4]
add edx,12*2 ; path start
call file_write
mov edi,[esp+0]
mov byte [edi],'/'
; eax=0 ok - eax=1 not enough free space
jmp file_system_return
fs_noharddisk_write:
cmp dword [esp+20],2 ; DELETE
jne fs_noharddisk_delete
mov eax,[esp+0] ; /dirname or /filename
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov edx,[esp+4]
add edx,12*2 ; path start
call removedir
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_noharddisk_delete:
cmp dword [esp+20],4 ; MAKEDIR
jne fs_noharddisk_makedir
mov eax,[esp+0] ; /dirname
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov edx,[esp+4]
add edx,12*2 ; path start
call makedir
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_noharddisk_makedir:
cmp dword [esp+20],5 ; RENAME
jne fs_noharddisk_rename
mov edi,[esp+0] ; start of source file name
add edi,12+1 ; continue after name
call expand_pathz ; convert destination name
mov eax,[edi+1]
cmp eax,'HD '
je fs_rename_test1
cmp eax,'HARD'
jne fs_rename_error
fs_rename_test1:
mov eax,[edi+1+12]
cmp eax,'1 '
je fs_rename_start
cmp eax,'FIRS'
jne fs_rename_error
fs_rename_start:
mov byte [ebx],0 ; path to asciiz
inc ebx ; filename start
add edi,12*2 ; path start
cmp byte [ebx],0
je fs_rename_error
cmp byte [ebx],32
je fs_rename_error
mov eax,[esp+0] ; /filename
mov byte [eax],0 ; path to asciiz
inc eax ; filename start
mov edx,[esp+4]
add edx,12*2 ; path start
call rename
mov edi,[esp+0]
mov byte [edi],'/'
jmp file_system_return
fs_rename_error:
mov eax,4 ; partition not defined at hd
jmp file_system_return
fs_noharddisk_rename:
fs_noharddisk:
; \begin{diamond}[18.03.2006]
mov eax, 5 ; file not found
; à ìîæåò áûòü, âîçâðàùàòü äðóãîé êîä îøèáêè?
mov ebx, [esp+24+24] ; do not change ebx in application
; \end{diamond}[18.03.2006]
file_system_return:
add esp,24
mov [esp+36],eax
mov [esp+24],ebx
ret
fs_give_dir1:
; \begin{diamond}[18.03.2006]
; /RD,/FD,/HD - only read is allowed
; other operations return "access denied", eax=10
; (execute operation returns eax=-10)
cmp dword [esp+20], 0
jz .read
add esp, 20
pop ecx
mov dword [esp+36], 10
ret
.read:
; \end{diamond}[18.03.2006]
mov al,0x10
mov ebx,1
mov edi,[esp+8]
mov esi,dir1
fs_d1_new:
mov ecx,11
; cld
rep movsb
stosb
add edi,32-11-1
dec ebx
jne fs_d1_new
add esp,24
and dword [esp+36],0 ; ok read
mov dword [esp+24],32*1 ; dir/data size
ret
LBA_read_ramdisk:
cmp [lba_read_enabled],1
je lbarrl1
xor ebx,ebx
mov eax,2
ret
lbarrl1:
cmp eax,18*2*80
jb lbarrl2
xor ebx,ebx
mov eax,3
ret
lbarrl2:
pushad
call restorefatchain
mov edi,ecx
mov esi,eax
shl esi,9
add esi,0x100000
mov ecx,512/4
; cld
rep movsd
popad
xor ebx,ebx
xor eax,eax
ret
LBA_read:
; IN:
;
; eax = LBA block to read
; ebx = pointer to FIRST/SECOND/THIRD/FOURTH
; ecx = abs pointer to return area
cmp [lba_read_enabled],1
je lbarl1
mov eax,2
ret
lbarl1:
call reserve_hd1
push eax
push ecx
mov edi,hd_address_table
mov esi,dir1
mov eax,[ebx]
mov edx,'1 '
mov ecx,4
blar0:
cmp eax,[esi]
je blar2
cmp eax,edx
je blar2
inc edx
add edi,8
add esi,11
dec ecx
jnz blar0
mov eax,1
mov ebx,1
jmp LBA_read_ret
blar2:
mov eax,[edi+0]
mov ebx,[edi+4]
mov [hdbase],eax
mov [hdid],ebx
call wait_for_hd_idle
cmp [hd_error],0
jne hd_lba_error
; eax = hd port
; ebx = set for primary (0x00) or slave (0x10)
cli
mov edx,eax
inc edx
xor eax,eax
out dx,al
inc edx
inc eax
out dx,al
inc edx
mov eax,[esp+4]
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
and al,1+2+4+8
add al,bl
add al,128+64+32
out dx,al
inc edx
mov al,20h
out dx,al
sti
call wait_for_sector_buffer
cmp [hd_error],0
jne hd_lba_error
cli
mov edi,[esp+0]
mov ecx,256
sub edx,7
cld
rep insw
sti
xor eax,eax
xor ebx,ebx
LBA_read_ret:
mov [hd_error],0
mov [hd1_status],0
add esp,2*4
ret
expand_pathz:
; IN:
; esi = asciiz path & file
; edi = buffer for path & file name
; OUT:
; edi = directory & file : / 11 + / 11 + / 11 - zero terminated
; ebx = /file name - zero terminated
; esi = pointer after source
push eax
push ecx
push edi ;[esp+0]
pathz_start:
mov byte [edi],'/'
inc edi
mov al,32
mov ecx,11
cld
rep stosb ; clear filename area
sub edi,11
mov ebx,edi ; start of dir/file name
pathz_new_char:
mov al,[esi]
inc esi
cmp al,0
je pathz_end
cmp al,'/'
jne pathz_not_path
cmp edi,ebx ; skip first '/'
jz pathz_new_char
lea edi,[ebx+11] ; start of next directory
jmp pathz_start
pathz_not_path:
cmp al,'.'
jne pathz_not_ext
lea edi,[ebx+8] ; start of extension
jmp pathz_new_char
pathz_not_ext:
cmp al,'a'
jb pathz_not_low
cmp al,'z'
ja pathz_not_low
sub al,0x20 ; char to uppercase
pathz_not_low:
mov [edi],al
inc edi
mov eax,[esp+0] ; start_of_dest_path
add eax,512 ; keep maximum path under 512 bytes
cmp edi,eax
jb pathz_new_char
pathz_end:
cmp ebx,edi ; if path end with '/'
jnz pathz_put_zero ; go back 1 level
sub ebx,12
pathz_put_zero:
mov byte [ebx+11],0
dec ebx ; include '/' char into file name
pop edi
pop ecx
pop eax
ret
;*******************************************
;* string to number
;* input eax - 4 byte string
;* output eax - number
;*******************************************
StringToNumber:
; ÏÅÐÅÂÎÄ ÑÒÐÎÊÎÂÎÃÎ ×ÈÑËÀ  ×ÈÑËÎÂÎÉ ÂÈÄ
; Âõîä:
; EDI - àäðåñ ñòðîêè ñ ÷èñëîì. Êîíåö ÷èñëà îòìå÷åí êîäîì 0Dh
; Âûõîä:
; CF - èíäèêàòîð îøèáîê:
; 0 - îøèáîê íåò;
; 1 - îøèáêà
; Åñëè CF=0, òî AX - ÷èñëî.
push bx
push cx
push dx
push edi
mov [partition_string],eax
mov edi,partition_string
xor cx,cx
i1:
mov al,[edi]
cmp al,32 ;13
je i_exit
; cmp al,'0'
; jb err
; cmp al,'9'
; ja err
sub al,48
shl cx,1
jc err
mov bx,cx
shl cx,1
jc err
shl cx,1
jc err
add cx,bx
jc err
cbw
add cx,ax
jc err
i3:
inc edi
jmp i1
i_exit:
mov ax,cx
clc
i4:
movzx eax,ax
pop edi
pop dx
pop cx
pop bx
ret
err:
stc
jmp i4
partition_string: dd 0
db 32

/kernel/tags/kolibri0.6.0.0/fs/fat32.inc
0,0 → 1,4184
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; FAT32.INC ;;
;; ;;
;; FAT16/32 functions for KolibriOS ;;
;; ;;
;; Copyright 2002 Paolo Minazzi, paolo.minazzi@inwind.it ;;
;; ;;
;; See file COPYING for details ;;
;; 20.08.2006 LFN set file size (truncate/extend) - diamond ;;
;; 17.08.2006 LFN write/append to file - diamond ;;
;; 23.06.2006 LFN start application - diamond ;;
;; 15.06.2006 LFN get/set file/folder info - diamond ;;
;; 27.05.2006 LFN create/rewrite file - diamond ;;
;; 04.05.2006 LFN read folder - diamond ;;
;; 29.04.2006 Elimination of hangup after the ;;
;; expiration hd_wait_timeout - Mario79 ;;
;; 23.04.2006 LFN read file - diamond ;;
;; 28.01.2006 find all Fat16/32 partition in all input point ;;
;; to MBR, see file part_set.inc - Mario79 ;;
;; 15.01.2005 get file size/attr/date, file_append - ATV ;;
;; 04.12.2004 skip volume label, file delete bug fixed - ATV ;;
;; 29.11.2004 get_free_FAT changed, append dir bug fixed - ATV ;;
;; 23.11.2004 don't allow overwrite dir with file - ATV ;;
;; 18.11.2004 get_disk_info and more error codes - ATV ;;
;; 17.11.2004 set_FAT/get_FAT and disk cache rewritten - ATV ;;
;; 10.11.2004 removedir clear whole directory structure - ATV ;;
;; 08.11.2004 rename - ATV ;;
;; 30.10.2004 file_read return also dirsize in bytes - ATV ;;
;; 20.10.2004 Makedir/Removedir - ATV ;;
;; 14.10.2004 Partition chain/Fat16 - ATV (thanks drh3xx) ;;
;; 06.9.2004 Fix free space by Mario79 added - MH ;;
;; 24.5.2004 Write back buffer for File_write -VT ;;
;; 20.5.2004 File_read function to work with syscall 58 - VT ;;
;; 30.3.2004 Error parameters at function return - VT ;;
;; 01.5.2002 Bugfix in device write - VT ;;
;; 20.5.2002 Hd status check - VT ;;
;; 29.6.2002 Improved fat32 verification - VT ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
cache_max equ 1919 ; max. is 1919*512+0x610000=0x6ffe00
ERROR_SUCCESS = 0
ERROR_DISK_BASE = 1
ERROR_UNSUPPORTED_FS = 2
ERROR_UNKNOWN_FS = 3
ERROR_PARTITION = 4
ERROR_FILE_NOT_FOUND = 5
ERROR_END_OF_FILE = 6
ERROR_MEMORY_POINTER = 7
ERROR_DISK_FULL = 8
ERROR_FAT_TABLE = 9
ERROR_ACCESS_DENIED = 10
PUSHAD_EAX equ [esp+28]
PUSHAD_ECX equ [esp+24]
PUSHAD_EDX equ [esp+20]
PUSHAD_EBX equ [esp+16]
PUSHAD_EBP equ [esp+8]
PUSHAD_ESI equ [esp+4]
PUSHAD_EDI equ [esp+0]
cluster dd 0 ; used by file_write,makedir,append
partition_count dd 0 ; partitions found by set_FAT32_variables
longname_sec1 dd 0 ; used by analyze_directory to save 2 previous
longname_sec2 dd 0 ; directory sectors for delete long filename
hd_error dd 0 ; set by wait_for_sector_buffer
hd_setup dd 0
hd_wait_timeout dd 0
cluster_tmp dd 0 ; used by analyze_directory
; and analyze_directory_to_write
file_size dd 0 ; used by file_read
sector_tmp dd 0 ; used by rename,append,file_write
entry_pos dd 0 ; used by rename,append,file_write
old_filesize dd 0 ; used by append
new_filepos dd 0 ; used by append
bytes2write dd 0 ; used by append
cache_search_start dd 0 ; used by find_empty_slot
fat_in_cache dd -1
fat_cache: times 512 db 0
uglobal
Sector512: ; label for dev_hdcd.inc
buffer: times 512 db 0
deltree_buffer: times 512 db 0
fsinfo_buffer: times 512 db 0
endg
iglobal
NewDirEntry1 db ". ",0x10
times 20 db 0
NewDirEntry2 db ".. ",0x10
times 20 db 0
endg
uglobal
dir_entry: times 32 db 0
startpath: times 255 db 0
fat16_root db 0 ; flag for fat16 rootdir
fat_change db 0 ; 1=fat has changed
endg
reserve_hd1:
cli
cmp [hd1_status],0
je reserve_ok1
sti
call change_task
jmp reserve_hd1
reserve_ok1:
push eax
mov eax,[0x3000]
shl eax,5
mov eax,[eax+0x3000+TASKDATA.pid]
mov [hd1_status],eax
pop eax
sti
ret
;********************************************
reserve_hd_channel:
cmp [hdbase], 0x1F0
jne .IDE_Channel_2
.IDE_Channel_1:
cli
cmp [IDE_Channel_1],0
je .reserve_ok_1
sti
call change_task
jmp .IDE_Channel_1
.IDE_Channel_2:
cli
cmp [IDE_Channel_2],0
je .reserve_ok_2
sti
call change_task
jmp .IDE_Channel_1
.reserve_ok_1:
mov [IDE_Channel_1],1
ret
.reserve_ok_2:
mov [IDE_Channel_2],1
ret
free_hd_channel:
cmp [hdbase], 0x1F0
jne .IDE_Channel_2
.IDE_Channel_1:
mov [IDE_Channel_1],0
ret
.IDE_Channel_2:
mov [IDE_Channel_2],0
ret
;********************************************
clear_hd_cache:
push eax ecx edi
mov edi,0x600000
mov ecx,16384
xor eax,eax
cld
rep stosd ; clear hd cache with 0
mov [cache_search_start],eax
mov [fat_in_cache],-1
mov [fat_change],0
pop edi ecx eax
ret
problem_partition db 0 ; used for partitions search
include 'part_set.inc'
set_FAT:
;--------------------------------
; input : EAX = cluster
; EDX = value to save
; output : EDX = old value
;--------------------------------
push eax ebx esi
cmp eax,2
jb sfc_error
cmp eax,[LAST_CLUSTER]
ja sfc_error
cmp [fat_type],16
je sfc_1
add eax,eax
sfc_1:
add eax,eax
mov esi,511
and esi,eax ; esi = position in fat sector
shr eax,9 ; eax = fat sector
add eax,[FAT_START]
mov ebx,fat_cache
cmp eax,[fat_in_cache] ; is fat sector already in memory?
je sfc_in_cache ; yes
cmp [fat_change],0 ; is fat changed?
je sfc_no_change ; no
call write_fat_sector ; yes. write it into disk
cmp [hd_error],0
jne sfc_error
sfc_no_change:
mov [fat_in_cache],eax ; save fat sector
call hd_read
cmp [hd_error],0
jne sfc_error
sfc_in_cache:
cmp [fat_type],16
jne sfc_test32
sfc_set16:
xchg [ebx+esi],dx ; save new value and get old value
jmp sfc_write
sfc_test32:
mov eax,[fatMASK]
sfc_set32:
and edx,eax
xor eax,-1 ; mask for high bits
and eax,[ebx+esi] ; get high 4 bits
or eax,edx
mov edx,[ebx+esi] ; get old value
mov [ebx+esi],eax ; save new value
sfc_write:
mov [fat_change],1 ; fat has changed
sfc_nonzero:
and edx,[fatMASK]
sfc_error:
pop esi ebx eax
ret
get_FAT:
;--------------------------------
; input : EAX = cluster
; output : EAX = next cluster
;--------------------------------
push ebx esi
cmp [fat_type],16
je gfc_1
add eax,eax
gfc_1:
add eax,eax
mov esi,511
and esi,eax ; esi = position in fat sector
shr eax,9 ; eax = fat sector
add eax,[FAT_START]
mov ebx,fat_cache
cmp eax,[fat_in_cache] ; is fat sector already in memory?
je gfc_in_cache
cmp [fat_change],0 ; is fat changed?
je gfc_no_change ; no
call write_fat_sector ; yes. write it into disk
cmp [hd_error],0
jne hd_error_01
gfc_no_change:
mov [fat_in_cache],eax
call hd_read
cmp [hd_error],0
jne hd_error_01
gfc_in_cache:
mov eax,[ebx+esi]
and eax,[fatMASK]
hd_error_01:
pop esi ebx
ret
get_free_FAT:
;-----------------------------------------------------------
; input : EAX = # cluster for start the searching
; output : if CARRY=0 EAX = # first cluster found free
; if CARRY=1 disk full
; Note : for more speed need to use fat_cache directly
;-----------------------------------------------------------
push ecx
mov ecx,[LAST_CLUSTER] ; counter for full disk
sub ecx,2
gff_test:
cmp eax,[LAST_CLUSTER] ; if above last cluster start at cluster 2
jbe gff_in_range
mov eax,2
gff_in_range:
push eax
call get_FAT ; get cluster state
cmp [hd_error],0
jne gff_not_found_1
test eax,eax ; is it free?
pop eax
je gff_found ; yes
inc eax ; next cluster
dec ecx ; is all checked?
jns gff_test ; no
gff_not_found_1:
add esp,4
gff_not_found:
pop ecx ; yes. disk is full
stc
ret
gff_found:
pop ecx
clc
ret
write_fat_sector:
;-----------------------------------------------------------
; write changed fat to disk
;-----------------------------------------------------------
push eax ebx ecx
mov [fat_change],0
mov eax,[fat_in_cache]
cmp eax,-1
jz write_fat_not_used
mov ebx,fat_cache
mov ecx,[NUMBER_OF_FATS]
write_next_fat:
call hd_write
cmp [hd_error],0
jne write_fat_not_used
add eax,[SECTORS_PER_FAT]
dec ecx
jnz write_next_fat
write_fat_not_used:
pop ecx ebx eax
ret
analyze_directory:
;-----------------------------------------------------------
; input : EAX = first cluster of the directory
; EBX = pointer to filename
; output : IF CARRY=0 EAX = sector where th file is found
; EBX = pointer in buffer
; [buffer .. buffer+511]
; ECX,EDX,ESI,EDI not changed
; IF CARRY=1 filename not found
; Note : if cluster=0 it's changed to read rootdir
; save 2 previous directory sectors in longname_sec
;-----------------------------------------------------------
push ecx edx esi edi ebx ; ebx = [esp+0]
mov [longname_sec1],0
mov [longname_sec2],0
adr_new_cluster:
mov [cluster_tmp],eax
mov [fat16_root],0
cmp eax,[LAST_CLUSTER]
ja adr_not_found ; too big cluster number, something is wrong
cmp eax,2
jnb adr_data_cluster
mov eax,[ROOT_CLUSTER] ; if cluster < 2 then read rootdir
cmp [fat_type],16
jne adr_data_cluster
mov eax,[ROOT_START]
mov edx,[ROOT_SECTORS]
mov [fat16_root],1 ; flag for fat16 rootdir
jmp adr_new_sector
adr_data_cluster:
sub eax,2
mov edx,[SECTORS_PER_CLUSTER]
imul eax,edx
add eax,[DATA_START]
adr_new_sector:
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne adr_not_found
mov ecx,512/32 ; count of dir entrys per sector = 16
adr_analyze:
mov edi,[ebx+11] ; file attribute
and edi,0xf
cmp edi,0xf
je adr_long_filename
test edi,0x8 ; skip over volume label
jne adr_long_filename ; Note: label can be same name as file/dir
mov esi,[esp+0] ; filename need to be uppercase
mov edi,ebx
push ecx
mov ecx,11
cld
rep cmpsb ; compare 8+3 filename
pop ecx
je adr_found
adr_long_filename:
add ebx,32 ; position of next dir entry
dec ecx
jnz adr_analyze
mov ecx,[longname_sec1] ; save 2 previous directory sectors
mov [longname_sec1],eax ; for delete long filename
mov [longname_sec2],ecx
inc eax ; next sector
dec edx
jne adr_new_sector
cmp [fat16_root],1 ; end of fat16 rootdir
je adr_not_found
adr_next_cluster:
mov eax,[cluster_tmp]
call get_FAT ; get next cluster
cmp [hd_error],0
jne adr_not_found
cmp eax,2 ; incorrect fat chain?
jb adr_not_found ; yes
cmp eax,[fatRESERVED] ; is it end of directory?
jb adr_new_cluster ; no. analyse it
adr_not_found:
pop edi edi esi edx ecx ; first edi will remove ebx
stc ; file not found
ret
adr_found:
pop edi edi esi edx ecx ; first edi will remove ebx
clc ; file found
ret
analyze_directory_to_write:
;-----------------------------------------------------------
; input : EAX = first cluster of the directory
; output : IF CARRY=0 EAX = sector where the empty pos is found
; EBX = pointer in buffer
; [buffer .. buffer+511]
; ECX,EDX,ESI,EDI not changed
; IF CARRY=1 disk full or fat corrupted
; Note : if cluster=0 it's changed to read rootdir
;-----------------------------------------------------------
push ecx edx edi
adw_new_cluster:
mov [cluster_tmp],eax
mov [fat16_root],0
cmp eax,[LAST_CLUSTER]
ja adw_not_found ; too big cluster number, something is wrong
cmp eax,2
jnb adw_data_cluster
mov eax,[ROOT_CLUSTER] ; if cluster < 2 then read rootdir
cmp [fat_type],16
jne adw_data_cluster
mov eax,[ROOT_START]
mov edx,[ROOT_SECTORS]
mov [fat16_root],1 ; flag for fat16 rootdir
jmp adw_new_sector
adw_data_cluster:
sub eax,2
mov edx,[SECTORS_PER_CLUSTER]
imul eax,edx
add eax,[DATA_START]
adw_new_sector:
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne adw_not_found
mov ecx,512/32 ; count of dir entrys per sector = 16
adw_analyze:
cmp byte [ebx],0x00 ; is free entry?
je adw_found ; yes
cmp byte [ebx],0xe5 ; is deleted entry?
je adw_found ; yes
add ebx,32 ; position of next dir entry
dec ecx
jnz adw_analyze
inc eax ; next sector
dec edx
jne adw_new_sector
cmp [fat16_root],1 ; end of fat16 rootdir
je adw_not_found
mov eax,[cluster_tmp]
call get_FAT ; get next cluster
cmp [hd_error],0
jne adw_not_found
cmp eax,2 ; incorrect fat chain?
jb adw_not_found ; yes
cmp eax,[fatRESERVED] ; is it end of directory?
jb adw_new_cluster ; no. analyse it
mov eax,2 ; this block of code add a new cluster
call get_free_FAT ; for the directory because the directory
jc adw_not_found ; is full
mov edx,[fatEND] ; new end for directory
call set_FAT
cmp [hd_error],0
jne adw_not_found
push eax ; save new cluster
mov edx,eax
mov eax,[cluster_tmp] ; change last cluster to point new cluster
call set_FAT
cmp [hd_error],0
jne adw_not_found_1
mov ecx,-1 ; remove 1 cluster from free disk space
call add_disk_free_space
cmp [hd_error],0
jne adw_not_found_1
mov ecx,512/4
xor eax,eax
mov edi,buffer
cld
rep stosd ; clear new directory cluster
pop eax
sub eax,2
mov ecx,[SECTORS_PER_CLUSTER]
imul eax,ecx
add eax,[DATA_START]
mov ebx,buffer
push eax ; save sector number
adw_set_empty_directory:
call hd_write
cmp [hd_error],0
jne adw_not_found_1
inc eax ; next sector
dec ecx
jnz adw_set_empty_directory
pop eax
adw_found:
pop edi edx ecx
clc ; free space found
ret
adw_not_found_1:
add esp,4
adw_not_found:
pop edi edx ecx
stc ; free space not found
ret
get_data_cluster:
;-----------------------------------------------------------
; input : EAX = cluster
; EBX = pointer to buffer
; EDX = # blocks to read in buffer
; ESI = # blocks to skip over
; output : if CARRY=0 ok EBX/EDX/ESI updated
; if CARRY=1 cluster out of range
; Note : if cluster=0 it's changed to read rootdir
;-----------------------------------------------------------
push eax ecx
mov [fat16_root],0
cmp eax,[LAST_CLUSTER]
ja gdc_error ; too big cluster number, something is wrong
cmp eax,2
jnb gdc_cluster
mov eax,[ROOT_CLUSTER] ; if cluster < 2 then read rootdir
cmp [fat_type],16
jne gdc_cluster
mov eax,[ROOT_START]
mov ecx,[ROOT_SECTORS] ; Note: not cluster size
mov [fat16_root],1 ; flag for fat16 rootdir
jmp gdc_read
gdc_cluster:
sub eax,2
mov ecx,[SECTORS_PER_CLUSTER]
imul eax,ecx
add eax,[DATA_START]
gdc_read:
test esi,esi ; first wanted block
je gdcl1 ; yes, skip count is 0
dec esi
jmp gdcl2
gdcl1:
call hd_read
cmp [hd_error],0
jne gdc_error
add ebx,512 ; update pointer
dec edx
gdcl2:
test edx,edx ; is all read?
je out_of_read
inc eax ; next sector
dec ecx
jnz gdc_read
out_of_read:
pop ecx eax
clc
ret
gdc_error:
pop ecx eax
stc
ret
set_data_cluster:
;-----------------------------------------------------------
; input : EAX = cluster
; EBX = pointer to buffer
; output : if CARRY=0 ok
; if CARRY=1 cluster out of range
;-----------------------------------------------------------
push eax ebx edx
cmp eax,[LAST_CLUSTER]
ja sdc_error ; too big cluster number, something is wrong
sub eax,2
jb sdc_error ; don't allow rootdir write
mov edx,[SECTORS_PER_CLUSTER]
imul eax,edx
add eax,[DATA_START]
sdc_write:
call hd_write
cmp [hd_error],0
jne sdc_error
add ebx,512 ; update pointer
inc eax
dec edx
jnz sdc_write
pop edx ebx eax
clc
ret
sdc_error:
pop edx ebx eax
stc
ret
get_cluster_of_a_path:
;---------------------------------------------------------
; input : EBX = pointer to a path string
; (example: the path "/files/data/document" become
; "files......data.......document...0"
; '.' = space char
; '0' = char(0) (ASCII=0) !!! )
; output : if (CARRY=1) -> ERROR in the PATH
; if (CARRY=0) -> EAX=cluster
;---------------------------------------------------------
push ebx edx
mov eax,[ROOT_CLUSTER]
mov edx,ebx
search_end_of_path:
cmp byte [edx],0
je found_end_of_path
inc edx ; '/'
mov ebx,edx
call analyze_directory
jc directory_not_found
mov eax,[ebx+20-2] ; read the HIGH 16bit cluster field
mov ax,[ebx+26] ; read the LOW 16bit cluster field
and eax,[fatMASK]
add edx,11 ; 8+3 (name+extension)
jmp search_end_of_path
found_end_of_path:
pop edx ebx
clc ; no errors
ret
directory_not_found:
pop edx ebx
stc ; errors occour
ret
bcd2bin:
;----------------------------------
; input : AL=BCD number (eg. 0x11)
; output : AH=0
; AL=decimal number (eg. 11)
;----------------------------------
xor ah,ah
shl ax,4
shr al,4
aad
ret
get_date_for_file:
;-----------------------------------------------------
; Get date from CMOS and pack day,month,year in AX
; DATE bits 0..4 : day of month 0..31
; 5..8 : month of year 1..12
; 9..15 : count of years from 1980
;-----------------------------------------------------
mov al,0x7 ;day
out 0x70,al
in al,0x71
call bcd2bin
ror eax,5
mov al,0x8 ;month
out 0x70,al
in al,0x71
call bcd2bin
ror eax,4
mov al,0x9 ;year
out 0x70,al
in al,0x71
call bcd2bin
add ax,20 ;because CMOS return only the two last
;digit (eg. 2000 -> 00 , 2001 -> 01) and we
rol eax,9 ;need the difference with 1980 (eg. 2001-1980)
ret
get_time_for_file:
;-----------------------------------------------------
; Get time from CMOS and pack hour,minute,second in AX
; TIME bits 0..4 : second (the low bit is lost)
; 5..10 : minute 0..59
; 11..15 : hour 0..23
;-----------------------------------------------------
mov al,0x0 ;second
out 0x70,al
in al,0x71
call bcd2bin
ror eax,6
mov al,0x2 ;minute
out 0x70,al
in al,0x71
call bcd2bin
ror eax,6
mov al,0x4 ;hour
out 0x70,al
in al,0x71
call bcd2bin
rol eax,11
ret
set_current_time_for_entry:
;-----------------------------------------------------
; Set current time/date for file entry
; input : ebx = file entry pointer
;-----------------------------------------------------
push eax
call get_time_for_file ; update files date/time
mov [ebx+22],ax
call get_date_for_file
mov [ebx+24],ax
pop eax
ret
makedir:
;-----------------------------------------------------
; input : eax = directory name
; edx = path
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 8 - disk full
; 10 - access denied
; Note : can only make one directory at time
;-----------------------------------------------------
cmp [fat_type],0
jnz make_dir_fat_ok
mov eax,ERROR_UNKNOWN_FS
ret
make_dir_fat_ok:
; call reserve_hd1
pushad
mov ebx,edx
call get_cluster_of_a_path
jnc make_dir_found_path
cmp [hd_error],0
jne make_dir_error_1
make_dir_path_not_found:
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne make_dir_error_2
mov [hd1_status],0
mov eax,ERROR_FILE_NOT_FOUND
ret
make_dir_disk_full:
cmp [hd_error],0
jne make_dir_error_1
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne make_dir_error_2
mov [hd1_status],0
mov eax,ERROR_DISK_FULL
ret
make_dir_already_exist:
cmp [hd_error],0
jne make_dir_error_1
mov eax,[cluster] ; directory cluster
xor edx,edx ; free
call set_FAT
cmp [hd_error],0
jne make_dir_error_1
popad
call update_disk ; write all of cache and fat to hd
make_dir_error_2:
mov [hd1_status],0
mov eax,ERROR_ACCESS_DENIED
ret
make_dir_error_1:
popad
jmp make_dir_error_2
make_dir_error_3:
add esp,4
jmp make_dir_error_1
make_dir_found_path:
cmp eax,[ROOT_CLUSTER]
jnz make_dir_not_root
xor eax,eax
make_dir_not_root:
mov ecx,eax ; directorys start cluster
mov word [NewDirEntry2+26],cx ; 16 bits low of cluster
shr ecx,16
mov word [NewDirEntry2+20],cx ; 16 bits high of cluster (=0 fat16)
push eax ; save parent directory cluster
mov eax,2
call get_free_FAT
mov [cluster],eax ; first free cluster
pop eax
jc make_dir_disk_full
push eax
mov eax,[cluster] ; directory cluster
mov edx,[fatEND] ; end for directory
call set_FAT
cmp [hd_error],0
jne make_dir_error_3
pop eax
mov ebx,PUSHAD_EAX ; dir name
push eax
call analyze_directory ; check if directory already exist
cmp [hd_error],0
jne make_dir_error_1
pop eax
jnc make_dir_already_exist ; need to free allocated cluster!
call analyze_directory_to_write
jc make_dir_already_exist ; need to free allocated cluster!
mov esi,PUSHAD_EAX ; dir name
mov edi,ebx ; pointer in buffer
mov ecx,11
cld
rep movsb
mov dword [ebx+28],0 ; dir size is always 0
mov ecx,[cluster]
mov [ebx+26],cx ; 16 bits low of cluster
mov word [NewDirEntry1+26],cx
shr ecx,16
mov [ebx+20],cx ; 16 bits high of cluster (=0 fat16)
mov word [NewDirEntry1+20],cx
mov byte [ebx+11],0x10 ; attribute = directory
call set_current_time_for_entry
mov ecx,[ebx+22]
mov dword [NewDirEntry1+22],ecx
mov dword [NewDirEntry2+22],ecx
mov ebx,buffer ; save the directory name,length,cluster
call hd_write
cmp [hd_error],0
jne make_dir_error_1
mov ecx,512/4
xor eax,eax
mov edi,buffer
cld
rep stosd ; clear new directory cluster
mov eax,[cluster] ; new directory cluster
sub eax,2
mov edx,[SECTORS_PER_CLUSTER]
imul eax,edx
add eax,[DATA_START]
mov ebx,buffer
add eax,edx ; start from last sector
dir_set_empty_directory:
dec eax ; next sector
cmp edx,1 ; is first directory sector?
jnz not_first_sector ; no. write empty sector
mov esi,NewDirEntry1
mov edi,buffer
mov ecx,64/4
cld
rep movsd ; copy 2 first directory entrys "." and ".."
not_first_sector:
call hd_write
cmp [hd_error],0
jne make_dir_error_1
dec edx
jnz dir_set_empty_directory
mov ecx,-1 ; remove 1 cluster from free disk space
call add_disk_free_space
cmp [hd_error],0
jne make_dir_error_1
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne make_dir_error_2
mov [hd1_status],0
xor eax,eax
ret
removedir:
;-----------------------------------------------------
; input : eax = file/directory name
; edx = path
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 10 - access denied
;-----------------------------------------------------
cmp [fat_type],0
jnz remove_dir_fat_ok
mov eax,ERROR_UNKNOWN_FS
ret
remove_dir_fat_ok:
; call reserve_hd1
push edi
mov edi,1 ; allow directory remove
call file_delete
cmp [hd_error],0
jne @f
pop edi
call update_disk ; write all of cache and fat to hd
@@:
mov [hd1_status],0
ret
add_disk_free_space:
;-----------------------------------------------------
; input : ecx = cluster count
; Note : negative = remove clusters from free space
; positive = add clusters to free space
;-----------------------------------------------------
test ecx,ecx ; no change
je add_dfs_no
cmp [fat_type],32 ; free disk space only used by fat32
jne add_dfs_no
push eax ebx
mov eax,[ADR_FSINFO]
mov ebx,fsinfo_buffer
call hd_read
cmp [hd_error],0
jne add_not_fs
cmp dword [ebx+0x1fc],0xaa550000 ; check sector id
jne add_not_fs
add [ebx+0x1e8],ecx
call hd_write
; cmp [hd_error],0
; jne add_not_fs
add_not_fs:
pop ebx eax
add_dfs_no:
ret
file_write:
;--------------------------------------------------------------------------
; INPUT : user-reg register-in-this meaning symbol-in-this-routine
;
; EAX EDI system call to write /
; EBX EAX (PAR0) pointer to file-name PAR0
; EDX ECX (PAR1) pointer to buffer PAR1
; ECX EBX (PAR2) file size PAR2
; ESI EDX (PAR3) pointer to path PAR3
;
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 8 - disk full
; 10 - access denied
;--------------------------------------------------------------------------
cmp [fat_type],0
jnz fat_ok_for_writing
mov eax,ERROR_UNKNOWN_FS
ret
fat_ok_for_writing:
; call reserve_hd1
pushad
xor edi,edi ; don't allow directory remove
call file_delete ; try to delete the file first
cmp [hd_error],0
jne exit_write_access_1
test eax,eax
jz old_deleted ; deleted ok
cmp eax,ERROR_FILE_NOT_FOUND
jnz exit_write_access ; it exist but can't delete
old_deleted:
mov ebx,PUSHAD_EDX
call get_cluster_of_a_path
jnc found_directory_for_writing
cmp [hd_error],0
jne exit_write_access
exit_writing_with_error:
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne exit_write_access_2
mov [hd1_status],0
mov eax,ERROR_FILE_NOT_FOUND
ret
exit_writing_disk_full_clear:
cmp [hd_error],0
jne exit_write_access_1
mov eax,[sector_tmp]
mov ebx,buffer
call hd_read ; read directory sector
cmp [hd_error],0
jne exit_write_access_1
mov edx,[entry_pos]
mov byte [edx],0xe5 ; mark as deleted
call hd_write
cmp [hd_error],0
jne exit_write_access_1
mov eax,[edx+20-2] ; FAT entry
mov ax,[edx+26]
and eax,[fatMASK]
call clear_cluster_chain
exit_writing_disk_full:
cmp [hd_error],0
jne exit_write_access_1
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne exit_write_access_2
mov [hd1_status],0
mov eax,ERROR_DISK_FULL
ret
exit_write_access:
popad
call update_disk ; write all of cache and fat to hd
mov [hd1_status],0
mov eax,ERROR_ACCESS_DENIED
ret
exit_write_access_1:
popad
exit_write_access_2:
mov [hd1_status],0
mov eax,ERROR_ACCESS_DENIED
ret
found_directory_for_writing:
call analyze_directory_to_write
jc exit_writing_disk_full
mov [sector_tmp],eax
mov [entry_pos],ebx
push eax ; save directory sector
mov eax,2
call get_free_FAT
mov [cluster],eax ; first free cluster
pop eax
jc exit_writing_disk_full
mov esi,PUSHAD_EAX ; file name
mov edi,ebx ; pointer in buffer
mov ecx,11
cld
rep movsb
mov esi,PUSHAD_EBX ; file size (bytes left)
mov [ebx+28],esi ; file size
mov ecx,[cluster]
mov [ebx+26],cx ; 16 bits low of cluster
shr ecx,16
mov [ebx+20],cx ; 16 bits high of cluster (=0 fat16)
mov byte [ebx+11],0x20 ; attribute = archive
call set_current_time_for_entry
mov ebx,buffer ; save the directory name,length,cluster
call hd_write
cmp [hd_error],0
jne exit_write_access_1
imul edi,[SECTORS_PER_CLUSTER],512 ; edi = cluster size in bytes
xor ecx,ecx ; cluster count
mov ebx,PUSHAD_ECX ; ebx = buffer
hd_new_block_write:
mov eax,[cluster] ; eax = block
call set_data_cluster
cmp [hd_error],0
jne exit_write_access_1
sub esi,edi ; sub wrote bytes
jbe file_saved_OK ; end if all done
add ebx,edi ; update buffer position
inc eax
call get_free_FAT ; next free in FAT
jc exit_writing_disk_full_clear
mov edx,eax
xchg eax,[cluster] ; get old cluster and save new cluster
call set_FAT ; add it in cluster chain
cmp [hd_error],0
jne exit_write_access_1
dec ecx ; update cluster count
jmp hd_new_block_write
file_saved_OK:
mov edx,[fatEND] ; new end for cluster chain
call set_FAT
cmp [hd_error],0
jne exit_write_access_1
dec ecx ; update cluster count
call add_disk_free_space ; remove clusters from free disk space
cmp [hd_error],0
jne exit_write_access_1
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne exit_write_access_2
mov [hd1_status],0
xor eax,eax
ret
file_read:
;--------------------------------------------------------------------------
; INPUT : user-register register-in-this meaning symbol-in-this
;
; EAX EDI system call to write /
; EBX EAX (PAR0) pointer to file-name PAR0
; EDX ECX (PAR1) pointer to buffer PAR1
; ECX EBX (PAR2) vt file blocks to read PAR2
; ESI EDX (PAR3) pointer to path PAR3
; EDI ESI vt first 512 block to read
; EDI if 0 - read root
;
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 6 - end of file
; 9 - fat table corrupted
; 10 - access denied
; ebx = size of file/directory
;--------------------------------------------------------------------------
cmp [fat_type],0
jnz fat_ok_for_reading
xor ebx,ebx
mov eax,ERROR_UNKNOWN_FS
mov [hd1_status], ebx
ret
fat_ok_for_reading:
; call reserve_hd1
pushad
mov ebx,edx
call get_cluster_of_a_path
jc file_to_read_not_found
test edi,edi ; read rootdir
jne no_read_root
xor eax,eax
call get_dir_size ; return rootdir size
cmp [hd_error],0
jne file_access_denied
mov [file_size],eax
mov eax,[ROOT_CLUSTER]
jmp file_read_start
no_read_root:
mov ebx,PUSHAD_EAX ; file name
call analyze_directory
jc file_to_read_not_found
mov eax,[ebx+28] ; file size
test byte [ebx+11],0x10 ; is it directory?
jz read_set_size ; no
mov eax,[ebx+20-2] ; FAT entry
mov ax,[ebx+26]
and eax,[fatMASK]
call get_dir_size
cmp [hd_error],0
jne file_access_denied
read_set_size:
mov [file_size],eax
mov eax,[ebx+20-2] ; FAT entry
mov ax,[ebx+26]
and eax,[fatMASK]
file_read_start:
mov ebx,PUSHAD_ECX ; pointer to buffer
mov edx,PUSHAD_EBX ; file blocks to read
mov esi,PUSHAD_ESI ; first 512 block to read
file_read_new_cluster:
call get_data_cluster
jc file_read_eof ; end of file or cluster out of range
test edx,edx ; is all read?
je file_read_OK ; yes
call get_FAT ; get next cluster
cmp [hd_error],0
jne file_access_denied
cmp eax,[fatRESERVED] ; end of file
jnb file_read_eof
cmp eax,2 ; incorrect fat chain
jnb file_read_new_cluster
popad
mov [hd1_status],0
mov ebx,[file_size]
mov eax,ERROR_FAT_TABLE
ret
file_read_eof:
cmp [hd_error],0
jne file_access_denied
popad
mov [hd1_status],0
mov ebx,[file_size]
mov eax,ERROR_END_OF_FILE
ret
file_read_OK:
popad
mov [hd1_status],0
mov ebx,[file_size]
xor eax,eax
ret
file_to_read_not_found:
cmp [hd_error],0
jne file_access_denied
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_FILE_NOT_FOUND
ret
file_access_denied:
popad
mov [hd1_status],0
xor ebx,ebx
mov eax,ERROR_ACCESS_DENIED
ret
get_dir_size:
;-----------------------------------------------------
; input : eax = first cluster (0=rootdir)
; output : eax = directory size in bytes
;-----------------------------------------------------
push edx
xor edx,edx ; count of directory clusters
test eax,eax
jnz dir_size_next
mov eax,[ROOT_SECTORS]
shl eax,9 ; fat16 rootdir size in bytes
cmp [fat_type],16
je dir_size_ret
mov eax,[ROOT_CLUSTER]
dir_size_next:
cmp eax,2 ; incorrect fat chain
jb dir_size_end
cmp eax,[fatRESERVED] ; end of directory
ja dir_size_end
call get_FAT ; get next cluster
cmp [hd_error],0
jne dir_size_ret
inc edx
jmp dir_size_next
dir_size_end:
imul eax,[SECTORS_PER_CLUSTER],512 ; cluster size in bytes
imul eax,edx
dir_size_ret:
pop edx
ret
file_delete:
;-----------------------------------------------------
; input : eax = file/directory name
; edx = path
; edi = 1 - allow directory remove else don't remove directory
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 10 - access denied
;-----------------------------------------------------
cmp [fat_type],0
jnz file_del_fat_ok
mov eax,ERROR_UNKNOWN_FS
ret
file_del_fat_ok:
pushad
mov ebx,edx
call get_cluster_of_a_path
jc file_to_delete_not_found
mov ebx,PUSHAD_EAX ; file/directory name
call analyze_directory
jc file_to_delete_not_found
test byte [ebx+11],0x10 ; is it directory?
jz delete_notdir ; no. it's file
cmp edi,1 ; allow directory remove
jnz delete_no_access ; no
push eax ; save directory sector
mov eax,[ebx+20-2] ; first cluster of file
mov ax,[ebx+26] ; 0 length files start cluster = 0
and eax,[fatMASK]
xor ebp,ebp ; counter for directory deepnes
call clear_directory
pop eax
jc delete_no_access
push ebx ; save directory pointer in buffer
mov ebx,buffer
call hd_read ; read directory sector
cmp [hd_error],0
jne delete_no_access_1
pop ebx
delete_notdir:
call delete_entry_name
cmp [hd_error],0
jne delete_no_access
mov eax,ecx ; first cluster of file
call clear_cluster_chain
cmp [hd_error],0
jne delete_no_access
popad
xor eax,eax
ret
delete_no_access_1:
add esp,4
delete_no_access:
popad
mov eax,ERROR_ACCESS_DENIED
ret
file_to_delete_not_found:
cmp [hd_error],0
jne delete_no_access
popad
mov eax,ERROR_FILE_NOT_FOUND
ret
clear_cluster_chain:
;-----------------------------------------------------
; input : eax = first cluster
;-----------------------------------------------------
push eax ecx edx
xor ecx,ecx ; cluster count
clean_new_chain:
cmp eax,[LAST_CLUSTER] ; end of file
ja delete_OK
cmp eax,2 ; unfinished fat chain or zero length file
jb delete_OK
cmp eax,[ROOT_CLUSTER] ; don't remove root cluster
jz delete_OK
xor edx,edx
call set_FAT ; clear fat entry
cmp [hd_error],0
jne access_denied_01
inc ecx ; update cluster count
mov eax,edx ; old cluster
jmp clean_new_chain
delete_OK:
call add_disk_free_space ; add clusters to free disk space
access_denied_01:
pop edx ecx eax
ret
clear_directory:
;-----------------------------------------------------
; input : eax = directory cluster
; ebp = directory deepnes
; Note : use recursive call
;-----------------------------------------------------
pushad
inc ebp
cmp ebp,64 ; if over 63 directory deep
jnb clear_error ; something must be wrong
clear_new_cluster:
cmp eax,[LAST_CLUSTER]
ja clear_end
cmp eax,[ROOT_CLUSTER] ; don't remove root cluster
jz clear_end
mov esi,eax ; esi = current directory cluster
sub eax,2
jb clear_end
mov ecx,[SECTORS_PER_CLUSTER]
imul eax,ecx
add eax,[DATA_START]
clear_new_sector:
mov edi,eax ; edi = current directory sector
mov ebx,deltree_buffer
call hd_read
cmp [hd_error],0
jne clear_error
mov edx,512/32 ; count of dir entrys per sector = 16
clear_analyze:
mov al,[ebx+11] ; file attribute
and al,0xf
cmp al,0xf
je clear_long_filename
cmp byte [ebx],'.' ; parent or current directory
je clear_next_entry
cmp byte [ebx],0xe5 ; deleted
je clear_next_entry
cmp byte [ebx],0 ; empty
je clear_write_last
;je clear_next_entry
mov eax,[ebx+20-2] ; first cluster of entry
mov ax,[ebx+26]
and eax,[fatMASK]
test byte [ebx+11],0x10 ; is it directory?
jz clear_file ; no
push eax ebx
mov eax,edi
mov ebx,deltree_buffer ; save buffer over recursive call
call hd_write ; write directory sector to disk
cmp [hd_error],0
jne clear_error
pop ebx eax
call clear_directory ; recursive call !!!
jc clear_error ; exit if error found
push eax ebx
mov eax,edi
mov ebx,deltree_buffer
call hd_read ; read directory sector again
cmp [hd_error],0
jne clear_error_1
pop ebx eax
clear_file:
call clear_cluster_chain
cmp [hd_error],0
jne clear_error
clear_long_filename:
mov byte [ebx],0xe5
clear_next_entry:
add ebx,32 ; position of next dir entry
dec edx
jnz clear_analyze
mov eax,edi
mov ebx,deltree_buffer
call hd_write ; write directory sector to disk
cmp [hd_error],0
jne clear_error
inc eax ; next sector
dec ecx
jnz clear_new_sector
mov eax,esi
call get_FAT ; get next cluster
cmp [hd_error],0
jne clear_error
jmp clear_new_cluster ; clear it
clear_write_last:
mov eax,edi
mov ebx,deltree_buffer
call hd_write ; write directory sector to disk
cmp [hd_error],0
jne clear_error
clear_end:
popad
clc
ret
clear_error_1:
add esp,8
clear_error:
popad
stc
ret
delete_entry_name:
;-----------------------------------------------------
; input : eax = directory sector
; ebx = directory pointer in buffer
; longname_sec = 2 previous directory sectors
; output : ecx = first cluster
; change : eax,ebx,edx
;-----------------------------------------------------
mov byte [ebx],0xe5
mov ecx,[ebx+20-2] ; first cluster of file
mov cx,[ebx+26] ; 0 length files start cluster = 0
and ecx,[fatMASK]
delete_empty:
sub ebx,32
cmp ebx,buffer
jnb delete_test_long
mov ebx,buffer
call hd_write ; write directory sector back
cmp [hd_error],0
jne delete_name_end
xor eax,eax
xchg eax,[longname_sec2]
xchg eax,[longname_sec1]
test eax,eax ; is there previous directory sector?
jz delete_name_end ; no
mov ebx,buffer
call hd_read ; read previous sector
cmp [hd_error],0
jne delete_name_end
mov ebx,buffer+0x1e0 ; start from last entry
delete_test_long:
mov dh,[ebx+11] ; file attribute
and dh,0xf
cmp dh,0xf
jne delete_write_buffer
cmp byte [ebx],0x40 ; end of long dir entry?
mov byte [ebx],0xe5
jb delete_empty
delete_write_buffer:
mov ebx,buffer
call hd_write ; write directory sector back
delete_name_end:
ret
rename:
;-----------------------------------------------------------
; input : eax = source directory name
; edx = source path
; ebx = dest directory name
; edi = dest path
; output : eax = 0 - ok
; 3 - unknown FS
; 5 - file not found
; 8 - disk full
; 10 - access denied
;-----------------------------------------------------------
cmp [fat_type],0
jnz fat_ok_for_rename
mov eax,ERROR_UNKNOWN_FS
ret
fat_ok_for_rename:
; call reserve_hd1
pushad
mov ebx,edx ; source path
call get_cluster_of_a_path
jc rename_entry_not_found
mov ebx,PUSHAD_EAX ; source directory name
call analyze_directory
jc rename_entry_not_found
mov [sector_tmp],eax ; save source sector
mov [entry_pos],ebx
mov esi,ebx
mov edi,dir_entry
mov ecx,32/4
cld
rep movsd ; save entry
mov ebx,PUSHAD_EDI ; dest path
call get_cluster_of_a_path
jc rename_entry_not_found
mov edx,eax ; save dest directory cluster
mov ebx,PUSHAD_EBX ; dest directory name
push [longname_sec1]
push [longname_sec2]
call analyze_directory ; check if entry already exist
cmp [hd_error],0
jne rename_entry_already_exist_1
pop [longname_sec2]
pop [longname_sec1]
jnc rename_entry_already_exist
mov eax,edx
call analyze_directory_to_write
jc rename_disk_full
mov esi,dir_entry
mov edi,ebx
mov ecx,32/4
cld
rep movsd ; copy entry
mov esi,PUSHAD_EBX ; dest directory name
mov edi,ebx
mov ecx,11
rep movsb ; copy name
mov ebx,buffer ; save the directory name,length,cluster
call hd_write
test byte [dir_entry+11],0x10 ; is it directory?
jz rename_not_dir ; no
mov eax,[dir_entry+20-2] ; FAT entry
mov ax,[dir_entry+26]
and eax,[fatMASK]
call change_2dot_cluster
cmp [hd_error],0
jne rename_entry_already_exist
rename_not_dir:
cmp [hd_error],0
jne rename_entry_already_exist
mov eax,[sector_tmp]
mov ebx,buffer
call hd_read ; read source directory sector
cmp [hd_error],0
jne rename_entry_already_exist
mov ebx,[entry_pos]
call delete_entry_name
cmp [hd_error],0
jne rename_entry_already_exist
popad
call update_disk ; write all of cache and fat to hd
cmp [hd_error],0
jne rename_entry_already_exist_2
mov [hd1_status],0
xor eax,eax
ret
rename_entry_not_found:
cmp [hd_error],0
jne rename_entry_already_exist
popad
mov [hd1_status],0
mov eax,ERROR_FILE_NOT_FOUND
ret
rename_entry_already_exist_1:
add esp,8
rename_entry_already_exist:
popad
rename_entry_already_exist_2:
mov [hd1_status],0
mov eax,ERROR_ACCESS_DENIED
ret
rename_disk_full:
cmp [hd_error],0
jne rename_entry_already_exist
popad
mov [hd1_status],0
mov eax,ERROR_DISK_FULL
ret
change_2dot_cluster:
;-----------------------------------------------------------
; input : eax = directory cluster
; edx = value to save
; change : eax,ebx,edx
;-----------------------------------------------------------
cmp eax,[LAST_CLUSTER]
ja not_2dot ; too big cluster number, something is wrong
sub eax,2
jb not_2dot
imul eax,[SECTORS_PER_CLUSTER]
add eax,[DATA_START]
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne not_2dot
cmp dword [ebx+32],'.. '
jnz not_2dot
cmp edx,[ROOT_CLUSTER] ; is rootdir cluster?
jne not_2dot_root
xor edx,edx ; yes. set it zero
not_2dot_root:
mov [ebx+32+26],dx ; 16 bits low of cluster
shr edx,16
mov [ebx+32+20],dx ; 16 bits high of cluster (=0 fat16)
call hd_write
not_2dot:
ret
get_hd_info:
;-----------------------------------------------------------
; output : eax = 0 - ok
; 3 - unknown FS
; 10 - access denied
; edx = cluster size in bytes
; ebx = total clusters on disk
; ecx = free clusters on disk
;-----------------------------------------------------------
cmp [fat_type],0
jnz info_fat_ok
xor edx,edx
xor ebx,ebx
xor ecx,ecx
mov eax,ERROR_UNKNOWN_FS
ret
info_fat_ok:
; call reserve_hd1
xor ecx,ecx ; count of free clusters
mov eax,2
mov ebx,[LAST_CLUSTER]
info_cluster:
push eax
call get_FAT ; get cluster info
cmp [hd_error],0
jne info_access_denied
test eax,eax ; is it free?
jnz info_used ; no
inc ecx
info_used:
pop eax
inc eax
cmp eax,ebx ; is above last cluster?
jbe info_cluster ; no. test next cluster
dec ebx ; cluster count
imul edx,[SECTORS_PER_CLUSTER],512 ; cluster size in bytes
mov [hd1_status],0
xor eax,eax
ret
info_access_denied:
add esp,4
xor edx,edx
xor ebx,ebx
xor ecx,ecx
mov eax,ERROR_ACCESS_DENIED
ret
update_disk:
;-----------------------------------------------------------
; write changed fat and cache to disk
;-----------------------------------------------------------
cmp [fat_change],0 ; is fat changed?
je upd_no_change
call write_fat_sector
cmp [hd_error],0
jne update_disk_acces_denied
upd_no_change:
call write_cache
update_disk_acces_denied:
ret
;**************************************************************************
;
; 0x600008 - first entry in cache list
;
; +0 - lba sector
; +4 - state of cache sector
; 0 = empty
; 1 = used for read ( same as in hd )
; 2 = used for write ( differs from hd )
;
; +65536 - cache entries
;
;**************************************************************************
hd_read:
;-----------------------------------------------------------
; input : eax = block to read
; ebx = destination
;-----------------------------------------------------------
push ecx esi edi ; scan cache
mov ecx,cache_max ; entries in cache
mov esi,0x600000+8
mov edi,1
hdreadcache:
cmp dword [esi+4],0 ; empty
je nohdcache
cmp [esi],eax ; correct sector
je yeshdcache
nohdcache:
add esi,8
inc edi
dec ecx
jnz hdreadcache
call find_empty_slot ; ret in edi
cmp [hd_error],0
jne return_01
push eax edx
call disable_ide_int
call wait_for_hd_idle
cmp [hd_error],0
jne hd_read_error
; cli
xor eax,eax
mov edx,[hdbase]
inc edx
out dx,al ; ATAFeatures ॣ¨áâà "®á®¡¥­­®á⥩"
inc edx
inc eax
out dx,al ; ATASectorCount áç¥â稪 ᥪâ®à®¢
inc edx
mov eax,[esp+4]
out dx,al ; ATASectorNumber ॣ¨áâà ­®¬¥à  ᥪâ®à
shr eax,8
inc edx
out dx,al ; ATACylinder ­®¬¥à 樫¨­¤à  (¬« ¤è¨© ¡ ©â)
shr eax,8
inc edx
out dx,al ; ­®¬¥à 樫¨­¤à  (áâ à訩 ¡ ©â)
shr eax,8
inc edx
and al,1+2+4+8
add al,byte [hdid]
add al,128+64+32
out dx,al ; ­®¬¥à £®«®¢ª¨/­®¬¥à ¤¨áª
inc edx
mov al,20h
out dx,al ; ATACommand ॣ¨áâà ª®¬ ­¤
; sti
call wait_for_sector_buffer
cmp [hd_error],0
jne hd_read_error
; cli
push edi
shl edi,9
add edi,0x600000+65536
mov ecx,256
mov edx,[hdbase]
cld
rep insw
pop edi
; sti
call enable_ide_int
pop edx eax
blok_read_2:
lea esi,[edi*8+0x600000]
mov [esi],eax ; sector number
mov dword [esi+4],1 ; hd read - mark as same as in hd
yeshdcache:
mov esi,edi
shl esi,9
add esi,0x600000+65536
mov edi,ebx
mov ecx,512/4
cld
rep movsd ; move data
return_01:
pop edi esi ecx
ret
disable_ide_int:
mov edx,[hdbase]
add edx,0x206
mov al,2
out dx,al
ret
enable_ide_int:
mov edx,[hdbase]
add edx,0x206
mov al,0
out dx,al
ret
hd_write:
;-----------------------------------------------------------
; input : eax = block
; ebx = pointer to memory
;-----------------------------------------------------------
push ecx esi edi
; check if the cache already has the sector and overwrite it
mov ecx,cache_max
mov esi,0x600000+8
mov edi,1
hdwritecache:
cmp dword [esi+4],0 ; if cache slot is empty
je not_in_cache_write
cmp [esi],eax ; if the slot has the sector
je yes_in_cache_write
not_in_cache_write:
add esi,8
inc edi
dec ecx
jnz hdwritecache
; sector not found in cache
; write the block to a new location
call find_empty_slot ; ret in edi
cmp [hd_error],0
jne hd_write_access_denied
lea esi,[edi*8+0x600000]
mov [esi],eax ; sector number
yes_in_cache_write:
mov dword [esi+4],2 ; write - differs from hd
shl edi,9
add edi,0x600000+65536
mov esi,ebx
mov ecx,512/4
cld
rep movsd ; move data
hd_write_access_denied:
pop edi esi ecx
ret
write_cache:
;-----------------------------------------------------------
; write all changed sectors to disk
;-----------------------------------------------------------
push eax ecx edx esi edi
; write difference ( 2 ) from cache to hd
mov ecx,cache_max
mov esi,0x600000+8
mov edi,1
write_cache_more:
cmp dword [esi+4],2 ; if cache slot is not different
jne does_not_need_writing
mov dword [esi+4],1 ; same as in hd
mov eax,[esi] ; eax = sector to write
cmp eax,[PARTITION_START]
jb danger
cmp eax,[PARTITION_END]
ja danger
call disable_ide_int
call wait_for_hd_idle
cmp [hd_error],0
jne hd_write_error
; cli
xor eax,eax
mov edx,[hdbase]
inc edx
out dx,al
inc edx
inc eax
out dx,al
inc edx
mov eax,[esi] ; eax = sector to write
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
and al,1+2+4+8
add al,byte [hdid]
add al,128+64+32
out dx,al
inc edx
mov al,30h
out dx,al
; sti
call wait_for_sector_buffer
cmp [hd_error],0
jne hd_write_error
push ecx esi
; cli
mov esi,edi
shl esi,9
add esi,0x600000+65536 ; esi = from memory position
mov ecx,256
mov edx,[hdbase]
cld
rep outsw
; sti
pop esi ecx
call enable_ide_int
danger:
does_not_need_writing:
add esi,8
inc edi
dec ecx
jnz write_cache_more
return_02:
pop edi esi edx ecx eax
ret
find_empty_slot:
;-----------------------------------------------------------
; find empty or read slot, flush cache if next 10% is used by write
; output : edi = cache slot
;-----------------------------------------------------------
push ecx esi
search_again:
mov ecx,cache_max*10/100
mov edi,[cache_search_start]
search_for_empty:
inc edi
cmp edi,cache_max
jbe inside_cache
mov edi,1
inside_cache:
cmp dword [edi*8+0x600000+4],2 ; get cache slot info
jb found_slot ; it's empty or read
dec ecx
jnz search_for_empty
call write_cache ; no empty slots found, write all
cmp [hd_error],0
jne found_slot_access_denied
jmp search_again ; and start again
found_slot:
mov [cache_search_start],edi
found_slot_access_denied:
pop esi ecx
ret
save_hd_wait_timeout:
push eax
mov eax,[timer_ticks];[0xfdf0]
add eax,300 ; 3 sec timeout
mov [hd_wait_timeout],eax
pop eax
ret
check_hd_wait_timeout:
push eax
mov eax,[hd_wait_timeout]
cmp [timer_ticks], eax ;[0xfdf0],eax
jg hd_timeout_error
pop eax
mov [hd_error],0
ret
iglobal
hd_timeout_str db 'K : FS - HD timeout',13,10,0
hd_read_str db 'K : FS - HD read error',13,10,0
hd_write_str db 'K : FS - HD write error',13,10,0
hd_lba_str db 'K : FS - HD LBA error',13,10,0
endg
hd_timeout_error:
call clear_hd_cache
call clear_application_table_status
mov esi,hd_timeout_str
call sys_msg_board_str
; jmp $
mov [hd_error],1
pop eax
ret
hd_read_error:
call clear_hd_cache
call clear_application_table_status
mov esi,hd_read_str
call sys_msg_board_str
pop edx eax
jmp return_01
; jmp $
hd_write_error:
call clear_hd_cache
call clear_application_table_status
mov esi,hd_write_str
call sys_msg_board_str
jmp return_02
; jmp $
hd_lba_error:
call clear_hd_cache
call clear_application_table_status
mov esi,hd_lba_str
call sys_msg_board_str
jmp LBA_read_ret
wait_for_hd_idle:
push eax edx
call save_hd_wait_timeout
mov edx,[hdbase]
add edx,0x7
wfhil1:
call check_hd_wait_timeout
cmp [hd_error],0
jne @f
in al,dx
test al,128
jnz wfhil1
@@:
pop edx eax
ret
wait_for_sector_buffer:
push eax edx
mov edx,[hdbase]
add edx,0x7
call save_hd_wait_timeout
hdwait_sbuf: ; wait for sector buffer to be ready
call check_hd_wait_timeout
cmp [hd_error],0
jne @f
in al,dx
test al,8
jz hdwait_sbuf
mov [hd_error],0
cmp [hd_setup],1 ; do not mark error for setup request
je buf_wait_ok
test al,1 ; previous command ended up with an error
jz buf_wait_ok
@@:
mov [hd_error],1
buf_wait_ok:
pop edx eax
ret
read_hd_file:
;-----------------------------------------------------------------
;
; Converting old reading function for hd-application start.
;
; IN:
;
; eax - pointer to file (0 = read only first sector of drive: eg 'label')
; ebx - file lenght
; ecx - start 512 byte block number
; edx - number of blocks to read
; esi - pointer to return/work area (atleast 20 000 bytes)
;
; For new read function
;
; EAX (PAR0) pointer to file-name
; ECX (PAR1) pointer to buffer
; EBX (PAR2) vt file blocks to read
; EDX (PAR3) pointer to path
; ESI vt first 512 block to read
; EDI if 0 - return root
;--------------------------------------------------------------------------
push ecx esi edi
mov esi,eax
mov edi,startpath
mov ecx,250
cld
rep movsb
pop edi esi ecx
mov eax,startpath
mov [eax+ebx-12],byte 0
push eax ebx ecx edx esi
pop ecx ; pointer to buffer
add ecx,1024
pop ebx ; number of blocks to read
pop esi ; first block to read
dec esi
pop eax ; file length
pop edx ; pointer to path
mov edi,12
lea eax,[eax+edx-12+1]
call file_read
ret
; \begin{diamond}
hd_find_lfn:
; in: esi->name
; out: CF=1 - file not found
; else CF=0 and edi->direntry, eax=sector
; destroys eax
push esi edi
push 0
push 0
push fat16_root_first
push fat16_root_next
mov eax, [ROOT_CLUSTER]
cmp [fat_type], 32
jz .fat32
.loop:
call fat_find_lfn
jc .notfound
cmp byte [esi], 0
jz .found
test byte [edi+11], 10h
jz .notfound
and dword [esp+12], 0
mov eax, [edi+20-2]
mov ax, [edi+26] ; cluster
.fat32:
mov [esp+8], eax
mov dword [esp+4], fat_notroot_first
mov dword [esp], fat_notroot_next
jmp .loop
.notfound:
add esp, 16
pop edi esi
stc
ret
.found:
lea eax, [esp+8]
cmp dword [eax], 0
jz .root
call fat_get_sector
jmp .cmn
.root:
mov eax, [eax+4]
add eax, [ROOT_START]
.cmn:
add esp, 20 ; CF=0
pop esi
ret
;----------------------------------------------------------------
;
; fs_HdRead - LFN variant for reading hard disk
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to read, 0+
; edx mem location to return data
;
; ret ebx = bytes read or 0xffffffff file not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_HdRead:
cmp [fat_type], 0
jnz @f
or ebx, -1
mov eax, ERROR_UNKNOWN_FS
ret
@@:
push edi
cmp byte [esi], 0
jnz @f
.noaccess:
pop edi
.noaccess_2:
or ebx, -1
mov eax, ERROR_ACCESS_DENIED
ret
.noaccess_3:
add esp,4
.noaccess_1:
add esp,4
.noaccess_4:
add esp,4*5
jmp .noaccess_2
@@:
call hd_find_lfn
jnc .found
pop edi
cmp [hd_error],0
jne .noaccess_2
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.found:
test byte [edi+11], 0x10 ; do not allow read directories
jnz .noaccess
test ebx, ebx
jz .l1
cmp dword [ebx+4], 0
jz @f
xor ebx, ebx
.reteof:
mov eax, 6
pop edi
ret
@@:
mov ebx, [ebx]
.l1:
push ecx edx
push 0
mov eax, [edi+28]
sub eax, ebx
jb .eof
cmp eax, ecx
jae @f
mov ecx, eax
mov byte [esp], 6
@@:
mov eax, [edi+20-2]
mov ax, [edi+26]
; now eax=cluster, ebx=position, ecx=count, edx=buffer for data
.new_cluster:
jecxz .new_sector
test eax, eax
jz .eof
cmp eax, [fatRESERVED]
jae .eof
mov [cluster_tmp], eax
dec eax
dec eax
mov edi, [SECTORS_PER_CLUSTER]
imul eax, edi
add eax, [DATA_START]
.new_sector:
test ecx, ecx
jz .done
sub ebx, 512
jae .skip
add ebx, 512
jnz .force_buf
cmp ecx, 512
jb .force_buf
; we may read directly to given buffer
push ebx
mov ebx, edx
call hd_read
cmp [hd_error],0
jne .noaccess_1
pop ebx
add edx, 512
sub ecx, 512
jmp .skip
.force_buf:
; we must read sector to temporary buffer and then copy it to destination
push eax ebx
mov ebx, buffer
call hd_read
cmp [hd_error],0
jne .noaccess_3
mov eax, ebx
pop ebx
add eax, ebx
push ecx
add ecx, ebx
cmp ecx, 512
jbe @f
mov ecx, 512
@@:
sub ecx, ebx
mov ebx, edx
call memmove
add edx, ecx
sub [esp], ecx
pop ecx
pop eax
xor ebx, ebx
.skip:
inc eax
dec edi
jnz .new_sector
mov eax, [cluster_tmp]
call get_FAT
cmp [hd_error],0
jne .noaccess_4
jmp .new_cluster
.done:
mov ebx, edx
pop eax edx ecx edi
sub ebx, edx
ret
.eof:
mov ebx, edx
pop eax edx ecx
sub ebx, edx
jmp .reteof
;----------------------------------------------------------------
;
; fs_HdReadFolder - LFN variant for reading hard disk folder
;
; esi points to filename
; ebx pointer to structure 32-bit number = first wanted block, 0+
; & flags (bitfields)
; flags: bit 0: 0=ANSI names, 1=UNICODE names
; ecx number of blocks to read, 0+
; edx mem location to return data
;
; ret ebx = blocks read or 0xffffffff folder not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_HdReadFolder:
mov eax, [ROOT_CLUSTER]
push edi
cmp byte [esi], 0
jz .doit
call hd_find_lfn
jnc .found
pop edi
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.found:
test byte [edi+11], 0x10 ; do not allow read files
jnz .found_dir
pop edi
or ebx, -1
mov eax, ERROR_ACCESS_DENIED
ret
.found_dir:
mov eax, [edi+20-2]
mov ax, [edi+26] ; eax=cluster
.doit:
push esi ecx
push ebp
sub esp, 262*2 ; reserve space for LFN
mov ebp, esp
push dword [ebx+4] ; for fat_get_name: read ANSI/UNICODE name
mov ebx, [ebx]
; init header
push eax ecx
mov edi, edx
mov ecx, 32/4
xor eax, eax
rep stosd
pop ecx eax
mov byte [edx], 1 ; version
mov esi, edi ; esi points to BDFE
.new_cluster:
mov [cluster_tmp], eax
test eax, eax
jnz @f
cmp [fat_type], 32
jz .notfound
mov eax, [ROOT_START]
push [ROOT_SECTORS]
push ebx
jmp .new_sector
@@:
dec eax
dec eax
imul eax, [SECTORS_PER_CLUSTER]
push [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
push ebx
.new_sector:
mov ebx, buffer
mov edi, ebx
call hd_read
cmp [hd_error], 0
jnz .notfound2
add ebx, 512
push eax
.l1:
call fat_get_name
jc .l2
cmp byte [edi+11], 0xF
jnz .do_bdfe
add edi, 0x20
cmp edi, ebx
jb .do_bdfe
pop eax
inc eax
dec dword [esp+4]
jnz @f
mov eax, [cluster_tmp]
test eax, eax
jz .done
call get_FAT
cmp [hd_error], 0
jnz .notfound2
cmp eax, 2
jb .done
cmp eax, [fatRESERVED]
jae .done
push eax
mov eax, [SECTORS_PER_CLUSTER]
mov [esp+8], eax
pop eax
mov [cluster_tmp], eax
dec eax
dec eax
imul eax, [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
@@:
mov ebx, buffer
mov edi, ebx
call hd_read
cmp [hd_error], 0
jnz .notfound2
add ebx, 512
push eax
.do_bdfe:
inc dword [edx+8] ; new file found
dec dword [esp+4]
jns .l2
dec ecx
js .l2
inc dword [edx+4] ; new file block copied
call fat_entry_to_bdfe
.l2:
add edi, 0x20
cmp edi, ebx
jb .l1
pop eax
inc eax
dec dword [esp+4]
jnz .new_sector
mov eax, [cluster_tmp]
test eax, eax
jz .done
call get_FAT
cmp [hd_error], 0
jnz .notfound2
cmp eax, 2
jb .done
cmp eax, [fatRESERVED]
jae .done
push eax
mov eax, [SECTORS_PER_CLUSTER]
mov [esp+8], eax
pop eax
pop ebx
add esp, 4
jmp .new_cluster
.notfound2:
add esp, 8
.notfound:
add esp, 262*2+4
pop ebp ecx esi edi
mov eax, ERROR_FILE_NOT_FOUND
or ebx, -1
ret
.done:
add esp, 262*2+4+8
pop ebp
mov ebx, [edx+4]
xor eax, eax
dec ecx
js @f
mov al, ERROR_END_OF_FILE
@@:
pop ecx esi edi
ret
fat16_root_next:
cmp edi, buffer+0x200-0x20
jae fat16_root_next_sector
add edi, 0x20
ret ; CF=0
fat16_root_next_sector:
; read next sector
push ecx
mov ecx, [eax+4]
inc ecx
mov [eax+4], ecx
cmp ecx, [ROOT_SECTORS]
pop ecx
jae fat16_root_first.readerr
fat16_root_first:
mov eax, [eax+4]
add eax, [ROOT_START]
push ebx
mov edi, buffer
mov ebx, edi
call hd_read
pop ebx
cmp [hd_error], 0
jnz .readerr
ret ; CF=0
.readerr:
stc
ret
fat16_root_begin_write:
push edi eax
call fat16_root_first
pop eax edi
ret
fat16_root_end_write:
pusha
mov eax, [eax+4]
add eax, [ROOT_START]
mov ebx, buffer
call hd_write
popa
ret
fat16_root_next_write:
cmp edi, buffer+0x200
jae @f
ret
@@:
call fat16_root_end_write
jmp fat16_root_next_sector
fat16_root_extend_dir:
stc
ret
fat_notroot_next:
cmp edi, buffer+0x200-0x20
jae fat_notroot_next_sector
add edi, 0x20
ret ; CF=0
fat_notroot_next_sector:
push ecx
mov ecx, [eax+4]
inc ecx
cmp ecx, [SECTORS_PER_CLUSTER]
jae fat_notroot_next_cluster
mov [eax+4], ecx
jmp @f
fat_notroot_next_cluster:
push eax
mov eax, [eax]
call get_FAT
mov ecx, eax
pop eax
cmp [hd_error], 0
jnz fat_notroot_next_err
cmp ecx, [fatRESERVED]
jae fat_notroot_next_err
mov [eax], ecx
and dword [eax+4], 0
@@:
pop ecx
fat_notroot_first:
call fat_get_sector
push ebx
mov edi, buffer
mov ebx, edi
call hd_read
pop ebx
cmp [hd_error], 0
jnz @f
ret ; CF=0
fat_notroot_next_err:
pop ecx
@@:
stc
ret
fat_notroot_begin_write:
push eax edi
call fat_notroot_first
pop edi eax
ret
fat_notroot_end_write:
call fat_get_sector
push ebx
mov ebx, buffer
call hd_write
pop ebx
ret
fat_notroot_next_write:
cmp edi, buffer+0x200
jae @f
ret
@@:
push eax
call fat_notroot_end_write
pop eax
jmp fat_notroot_next_sector
fat_notroot_extend_dir:
push eax
mov eax, [eax]
call get_free_FAT
jnc .found
pop eax
ret ; CF=1
.found:
push edx
mov edx, [fatEND]
call set_FAT
mov edx, eax
mov eax, [esp+4]
mov eax, [eax]
push edx
call set_FAT
pop edx
cmp [hd_error], 0
jz @f
pop edx
pop eax
stc
ret
@@:
push ecx
or ecx, -1
call add_disk_free_space
; zero new cluster
mov ecx, 512/4
mov edi, buffer
push edi
xor eax, eax
rep stosd
pop edi
pop ecx
mov eax, [esp+4]
mov [eax], edx
and dword [eax+4], 0
pop edx
mov eax, [eax]
dec eax
dec eax
push ebx ecx
mov ecx, [SECTORS_PER_CLUSTER]
imul eax, ecx
add eax, [DATA_START]
mov ebx, edi
@@:
call hd_write
inc eax
loop @b
pop ecx ebx eax
clc
ret
fat_get_sector:
push ecx
mov ecx, [eax]
dec ecx
dec ecx
imul ecx, [SECTORS_PER_CLUSTER]
add ecx, [DATA_START]
add ecx, [eax+4]
mov eax, ecx
pop ecx
ret
;----------------------------------------------------------------
;
; fs_HdRewrite - LFN variant for writing hard disk
;
; esi points to filename
; ebx ignored (reserved)
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = number of written bytes
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fshrad:
mov eax, ERROR_ACCESS_DENIED
xor ebx, ebx
ret
fshrfs:
mov eax, ERROR_UNKNOWN_FS
xor ebx, ebx
ret
fs_HdRewrite:
cmp [fat_type], 0
jz fshrfs
cmp byte [esi], 0
jz fshrad
pushad
xor ebp, ebp
push esi
@@:
lodsb
test al, al
jz @f
cmp al, '/'
jnz @b
lea ebp, [esi-1]
jmp @b
@@:
pop esi
test ebp, ebp
jnz .noroot
mov ebp, [ROOT_CLUSTER]
cmp [fat_type], 32
jz .pushnotroot
push fat16_root_extend_dir
push fat16_root_end_write
push fat16_root_next_write
push fat16_root_begin_write
xor ebp, ebp
push ebp
push ebp
push fat16_root_first
push fat16_root_next
jmp .common1
.noroot:
; check existence
mov byte [ebp], 0
call hd_find_lfn
mov byte [ebp], '/'
lea esi, [ebp+1]
jnc @f
mov eax, ERROR_FILE_NOT_FOUND
.ret1:
mov [esp+28], eax
popad
xor ebx, ebx
ret
@@:
test byte [edi+11], 0x10 ; must be directory
mov eax, ERROR_ACCESS_DENIED
jz .ret1
mov ebp, [edi+20-2]
mov bp, [edi+26] ; ebp=cluster
mov eax, ERROR_FAT_TABLE
cmp ebp, 2
jb .ret1
.pushnotroot:
push fat_notroot_extend_dir
push fat_notroot_end_write
push fat_notroot_next_write
push fat_notroot_begin_write
push 0
push ebp
push fat_notroot_first
push fat_notroot_next
.common1:
call fat_find_lfn
jc .notfound
; found; must not be directory
test byte [edi+11], 10h
jz @f
add esp, 32
popad
mov eax, ERROR_ACCESS_DENIED
xor ebx, ebx
ret
@@:
; delete FAT chain
push edi
xor eax, eax
mov dword [edi+28], eax ; zero size
xor ecx, ecx
mov eax, [edi+20-2]
mov ax, [edi+26]
mov word [edi+20], cx
mov word [edi+26], cx
test eax, eax
jz .done1
@@:
cmp eax, [fatRESERVED]
jae .done1
push edx
xor edx, edx
call set_FAT
mov eax, edx
pop edx
inc ecx
jmp @b
.done1:
pop edi
call get_time_for_file
mov [edi+22], ax
call get_date_for_file
mov [edi+24], ax
mov [edi+18], ax
or byte [edi+11], 20h ; set 'archive' attribute
jmp .doit
.notfound:
; file is not found; generate short name
call fat_name_is_legal
jc @f
add esp, 32
popad
mov eax, ERROR_FILE_NOT_FOUND
xor ebx, ebx
ret
@@:
sub esp, 12
mov edi, esp
call fat_gen_short_name
.test_short_name_loop:
push esi edi ecx
mov esi, edi
lea eax, [esp+12+12+8]
mov [eax], ebp
and dword [eax+4], 0
call dword [eax-4]
jc .found
.test_short_name_entry:
cmp byte [edi+11], 0xF
jz .test_short_name_cont
mov ecx, 11
push esi edi
repz cmpsb
pop edi esi
jz .short_name_found
.test_short_name_cont:
lea eax, [esp+12+12+8]
call dword [eax-8]
jnc .test_short_name_entry
jmp .found
.short_name_found:
pop ecx edi esi
call fat_next_short_name
jnc .test_short_name_loop
.disk_full:
add esp, 12+32
popa
mov eax, ERROR_DISK_FULL
xor ebx, ebx
ret
.found:
pop ecx edi esi
; now find space in directory
; we need to save LFN <=> LFN is not equal to short name <=> generated name contains '~'
mov al, '~'
push ecx edi
mov ecx, 8
repnz scasb
push 1
pop eax ; 1 entry
jnz .notilde
; we need ceil(strlen(esi)/13) additional entries = floor((strlen(esi)+12+13)/13) total
xor eax, eax
@@:
cmp byte [esi], 0
jz @f
inc esi
inc eax
jmp @b
@@:
sub esi, eax
add eax, 12+13
mov ecx, 13
push edx
cdq
div ecx
pop edx
.notilde:
push -1
push -1
push -1
; find <eax> successive entries in directory
xor ecx, ecx
push eax
lea eax, [esp+16+8+12+8]
mov [eax], ebp
and dword [eax+4], 0
call dword [eax-4]
pop eax
jnc .scan_dir
.fsfrfe3:
add esp, 12+8+12+32
popad
mov eax, 11
xor ebx, ebx
ret
.scan_dir:
cmp byte [edi], 0
jz .free
cmp byte [edi], 0xE5
jz .free
xor ecx, ecx
.scan_cont:
push eax
lea eax, [esp+16+8+12+8]
call dword [eax-8]
pop eax
jnc .scan_dir
cmp [hd_error], 0
jnz .fsfrfe3
push eax
lea eax, [esp+16+8+12+8]
call dword [eax+20] ; extend directory
pop eax
jnc .scan_dir
add esp, 12+8+12+32
popad
mov eax, ERROR_DISK_FULL
xor ebx, ebx
ret
.free:
test ecx, ecx
jnz @f
mov [esp], edi
mov ecx, [esp+12+8+12+8]
mov [esp+4], ecx
mov ecx, [esp+12+8+12+12]
mov [esp+8], ecx
xor ecx, ecx
@@:
inc ecx
cmp ecx, eax
jb .scan_cont
; found!
; calculate name checksum
push esi ecx
mov esi, [esp+8+12]
mov ecx, 11
xor eax, eax
@@:
ror al, 1
add al, [esi]
inc esi
loop @b
pop ecx esi
pop edi
pop dword [esp+8+12+12]
pop dword [esp+8+12+12]
; edi points to first entry in free chunk
dec ecx
jz .nolfn
push esi
push eax
lea eax, [esp+8+8+12+8]
call dword [eax+8] ; begin write
mov al, 40h
.writelfn:
or al, cl
mov esi, [esp+4]
push ecx
dec ecx
imul ecx, 13
add esi, ecx
stosb
mov cl, 5
call fs_RamdiskRewrite.read_symbols
mov ax, 0xF
stosw
mov al, [esp+4]
stosb
mov cl, 6
call fs_RamdiskRewrite.read_symbols
xor eax, eax
stosw
mov cl, 2
call fs_RamdiskRewrite.read_symbols
pop ecx
lea eax, [esp+8+8+12+8]
call dword [eax+12] ; next write
xor eax, eax
loop .writelfn
pop eax
pop esi
; lea eax, [esp+8+12+8]
; call dword [eax+16] ; end write
.nolfn:
xchg esi, [esp]
mov ecx, 11
rep movsb
mov word [edi], 20h ; attributes
sub edi, 11
pop esi ecx
add esp, 12
mov byte [edi+13], 0 ; tenths of a second at file creation time
call get_time_for_file
mov [edi+14], ax ; creation time
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+16], ax ; creation date
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
xor ecx, ecx
mov word [edi+20], cx ; high word of cluster
mov word [edi+26], cx ; low word of cluster - to be filled
mov dword [edi+28], ecx ; file size - to be filled
.doit:
lea eax, [esp+8]
call dword [eax+16] ; flush directory
push ecx
mov ecx, [esp+4+32+24]
push ecx
push edi
mov esi, edx
test ecx, ecx
jz .done
mov eax, 2
call get_free_FAT
jc .diskfull
push eax
mov [edi+26], ax
shr eax, 16
mov [edi+20], ax
lea eax, [esp+16+8]
call dword [eax+16] ; flush directory
pop eax
push edx
mov edx, [fatEND]
call set_FAT
pop edx
.write_cluster:
push eax
dec eax
dec eax
mov ebp, [SECTORS_PER_CLUSTER]
imul eax, ebp
add eax, [DATA_START]
; write data
.write_sector:
mov ecx, 512
cmp dword [esp+8], ecx
jb .writeshort
; we can write directly from given buffer
mov ebx, esi
add esi, ecx
jmp .writecommon
.writeshort:
mov ecx, [esp+8]
push ecx
mov edi, buffer
mov ebx, edi
rep movsb
mov ecx, buffer+0x200
sub ecx, edi
push eax
xor eax, eax
rep stosb
pop eax
pop ecx
.writecommon:
call hd_write
cmp [hd_error], 0
jnz .writeerr
inc eax
sub dword [esp+8], ecx
jz .writedone
dec ebp
jnz .write_sector
; allocate new cluster
pop eax
mov ecx, eax
call get_free_FAT
jc .diskfull
push edx
mov edx, [fatEND]
call set_FAT
xchg eax, ecx
mov edx, ecx
call set_FAT
pop edx
xchg eax, ecx
jmp .write_cluster
.diskfull:
mov eax, ERROR_DISK_FULL
jmp .ret
.writeerr:
pop eax
sub esi, ecx
mov eax, 11
jmp .ret
.writedone:
pop eax
.done:
xor eax, eax
.ret:
pop edi ecx
mov ebx, esi
sub ebx, edx
pop ebp
mov [esp+32+28], eax
lea eax, [esp+8]
call dword [eax+8]
mov [edi+28], ebx
call dword [eax+16]
mov [esp+32+16], ebx
lea eax, [ebx+511]
shr eax, 9
mov ecx, [SECTORS_PER_CLUSTER]
lea eax, [eax+ecx-1]
xor edx, edx
div ecx
mov ecx, ebp
sub ecx, eax
call add_disk_free_space
add esp, 32
call update_disk
popad
ret
;----------------------------------------------------------------
;
; fs_HdWrite - LFN variant for writing to floppy
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = bytes written (maybe 0)
; eax = 0 ok write or other = errormsg
;
;--------------------------------------------------------------
fs_HdWrite.access_denied:
push ERROR_ACCESS_DENIED
fs_HdWrite.ret0:
pop eax
xor ebx, ebx
ret
fs_HdWrite.ret11:
push 11
jmp fs_HdWrite.ret0
fs_HdWrite:
cmp [fat_type], 0
jnz @f
push ERROR_UNKNOWN_FS
jmp .ret0
@@:
cmp byte [esi], 0
jz .access_denied
pushad
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
popad
push 11
jmp .ret0
@@:
popfd
jnc .found
popad
push ERROR_FILE_NOT_FOUND
jmp .ret0
.found:
; FAT does not support files larger than 4GB
test ebx, ebx
jz .l1
cmp dword [ebx+4], 0
jz @f
.eof:
popad
push ERROR_END_OF_FILE
jmp .ret0
@@:
mov ebx, [ebx]
.l1:
; now edi points to direntry, ebx=start byte to write,
; ecx=number of bytes to write, edx=data pointer
; extend file if needed
add ecx, ebx
jc .eof ; FAT does not support files larger than 4GB
push eax ; save directory sector
push 0 ; return value=0
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
push dword [edi+28] ; save current file size
cmp ecx, [edi+28]
jbe .length_ok
cmp ecx, ebx
jz .length_ok
call hd_extend_file
jnc .length_ok
mov [esp+4], eax
; hd_extend_file can return three error codes: FAT table error, device error or disk full.
; First two cases are fatal errors, in third case we may write some data
cmp al, ERROR_DISK_FULL
jz .disk_full
pop eax
pop eax
mov [esp+4+28], eax
pop eax
popad
xor ebx, ebx
ret
.disk_full:
; correct number of bytes to write
mov ecx, [edi+28]
cmp ecx, ebx
ja .length_ok
.ret:
call update_disk
cmp [hd_error], 0
jz @f
mov byte [esp+4], 11
@@:
pop eax
pop eax
mov [esp+4+28], eax ; eax=return value
pop eax
sub edx, [esp+20]
mov [esp+16], edx ; ebx=number of written bytes
popad
ret
.length_ok:
mov esi, [edi+28]
mov eax, [edi+20-2]
mov ax, [edi+26]
mov edi, eax ; edi=current cluster
xor ebp, ebp ; ebp=current sector in cluster
; save directory
mov eax, [esp+8]
push ebx
mov ebx, buffer
call hd_write
pop ebx
cmp [hd_error], 0
jz @f
.device_err:
mov byte [esp+4], 11
jmp .ret
@@:
; now ebx=start pos, ecx=end pos, both lie inside file
sub ecx, ebx
jz .ret
.write_loop:
; get length of data in current sector
push ecx
sub ebx, 0x200
jb .hasdata
neg ebx
xor ecx, ecx
jmp @f
.hasdata:
neg ebx
cmp ecx, ebx
jbe @f
mov ecx, ebx
@@:
; get current sector number
mov eax, edi
dec eax
dec eax
imul eax, [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
add eax, ebp
; load sector if needed
cmp dword [esp+4], 0 ; we don't need to read uninitialized data
jz .noread
cmp ecx, 0x200 ; we don't need to read sector if it is fully rewritten
jz .noread
cmp ecx, esi ; (same for the last sector)
jz .noread
push ebx
mov ebx, buffer
call hd_read
pop ebx
cmp [hd_error], 0
jz @f
.device_err2:
pop ecx
jmp .device_err
@@:
.noread:
; zero uninitialized data if file was extended (because hd_extend_file does not this)
push eax ecx edi
xor eax, eax
mov ecx, 0x200
sub ecx, [esp+4+12]
jbe @f
mov edi, buffer
add edi, [esp+4+12]
rep stosb
@@:
; zero uninitialized data in the last sector
mov ecx, 0x200
sub ecx, esi
jbe @f
mov edi, buffer
add edi, esi
rep stosb
@@:
pop edi ecx eax
; copy new data
push eax
mov eax, edx
neg ebx
jecxz @f
add ebx, buffer+0x200
call memmove
xor ebx, ebx
@@:
pop eax
; save sector
push ebx
mov ebx, buffer
call hd_write
pop ebx
cmp [hd_error], 0
jnz .device_err2
add edx, ecx
sub [esp], ecx
pop ecx
jz .ret
; next sector
inc ebp
cmp ebp, [SECTORS_PER_CLUSTER]
jb @f
xor ebp, ebp
mov eax, edi
call get_FAT
mov edi, eax
cmp [hd_error], 0
jnz .device_err
@@:
sub esi, 0x200
jae @f
xor esi, esi
@@:
sub dword [esp], 0x200
jae @f
and dword [esp], 0
@@: jmp .write_loop
hd_extend_file.zero_size:
xor eax, eax
jmp hd_extend_file.start_extend
; extends file on hd to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL or 11)
hd_extend_file:
push ebp
mov ebp, [SECTORS_PER_CLUSTER]
imul ebp, [BYTES_PER_SECTOR]
push ecx
; find the last cluster of file
mov eax, [edi+20-2]
mov ax, [edi+26]
mov ecx, [edi+28]
jecxz .zero_size
.last_loop:
sub ecx, ebp
jbe .last_found
call get_FAT
cmp [hd_error], 0
jz @f
.device_err:
pop ecx
.device_err2:
pop ebp
push 11
.ret_err:
pop eax
stc
ret
@@:
cmp eax, 2
jb .fat_err
cmp eax, [fatRESERVED]
jb .last_loop
.fat_err:
pop ecx ebp
push ERROR_FAT_TABLE
jmp .ret_err
.last_found:
push eax
call get_FAT
cmp [hd_error], 0
jz @f
pop eax
jmp .device_err
@@:
cmp eax, [fatRESERVED]
pop eax
jb .fat_err
; set length to full number of clusters
sub [edi+28], ecx
.start_extend:
pop ecx
; now do extend
push edx
mov edx, 2 ; start scan from cluster 2
.extend_loop:
cmp [edi+28], ecx
jae .extend_done
; add new cluster
push eax
mov eax, edx
call get_free_FAT
jc .disk_full
mov edx, [fatEND]
call set_FAT
mov edx, eax
pop eax
test eax, eax
jz .first_cluster
push edx
call set_FAT
pop edx
jmp @f
.first_cluster:
ror edx, 16
mov [edi+20], dx
ror edx, 16
mov [edi+26], dx
@@:
push ecx
mov ecx, -1
call add_disk_free_space
pop ecx
mov eax, edx
cmp [hd_error], 0
jnz .device_err3
add [edi+28], ebp
jmp .extend_loop
.extend_done:
mov [edi+28], ecx
pop edx ebp
xor eax, eax ; CF=0
ret
.device_err3:
pop edx
jmp .device_err2
.disk_full:
pop eax edx ebp
push ERROR_DISK_FULL
pop eax
cmp [hd_error], 0
jz @f
mov al, 11
@@: stc
ret
;----------------------------------------------------------------
;
; fs_HdSetFileEnd - set end of file on hard disk
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_HdSetFileEnd:
cmp [fat_type], 0
jnz @f
push ERROR_UNKNOWN_FS
.ret:
pop eax
ret
@@:
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
push 11
jmp .ret
@@:
popfd
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
jmp .ret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax ; save directory sector
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
mov ebx, buffer
call hd_write
pop edi
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
.expand:
push ebx ebp ecx
push dword [edi+28] ; save old size
mov ecx, eax
call hd_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
.pop_ret:
call update_disk
pop eax ecx ebp ebx ecx edi edi
ret
.expand_ok:
.disk_full:
; save directory
mov eax, [edi+28]
xchg eax, [esp+20]
mov ebx, buffer
call hd_write
mov eax, [edi+20-2]
mov ax, [edi+26]
mov edi, eax
cmp [hd_error], 0
jz @f
.pop_ret11:
mov byte [esp], 11
jmp .pop_ret
@@:
; now zero new data
xor ebp, ebp
; edi=current cluster, ebp=sector in cluster
; [esp+20]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
lea eax, [edi-2]
imul eax, [SECTORS_PER_CLUSTER]
add eax, [DATA_START]
add eax, ebp
cmp dword [esp+4], -0x200
jz .noread
mov ebx, buffer
call hd_read
cmp [hd_error], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, buffer+0x200
add edi, [esp+8]
push eax
xor eax, eax
mov [esp+12], eax
rep stosb
pop eax
pop edi
call hd_write
cmp [hd_error], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+20], 0x200
jbe .pop_ret
inc ebp
cmp ebp, [SECTORS_PER_CLUSTER]
jb .zero_loop
xor ebp, ebp
mov eax, edi
call get_FAT
mov edi, eax
cmp [hd_error], 0
jnz .pop_ret11
jmp .zero_loop
.truncate:
mov [edi+28], eax
push ecx
mov ecx, [edi+20-2]
mov cx, [edi+26]
push eax
test eax, eax
jz .zero_size
; find new last cluster
@@:
mov eax, [SECTORS_PER_CLUSTER]
shl eax, 9
sub [esp], eax
jbe @f
mov eax, ecx
call get_FAT
mov ecx, eax
cmp [hd_error], 0
jz @b
.device_err3:
pop eax ecx eax edi
push 11
pop eax
ret
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
push edx
mov eax, ecx
mov edx, [fatEND]
call set_FAT
mov eax, edx
pop edx
cmp [hd_error], 0
jz @f
.device_err4:
pop ecx
jmp .device_err3
.zero_size:
and word [edi+20], 0
and word [edi+26], 0
push 0
mov eax, ecx
@@:
; delete FAT chain
call clear_cluster_chain
cmp [hd_error], 0
jnz .device_err4
; save directory
mov eax, [esp+12]
push ebx
mov ebx, buffer
call hd_write
pop ebx
cmp [hd_error], 0
jnz .device_err4
; zero last sector, ignore errors
pop ecx
pop eax
dec ecx
imul ecx, [SECTORS_PER_CLUSTER]
add ecx, [DATA_START]
push eax
sar eax, 9
add ecx, eax
pop eax
and eax, 0x1FF
jz .truncate_done
push ebx eax
mov eax, ecx
mov ebx, buffer
call hd_read
pop eax
lea edi, [buffer+eax]
push ecx
mov ecx, 0x200
sub ecx, eax
xor eax, eax
rep stosb
pop eax
call hd_write
pop ebx
.truncate_done:
pop ecx eax edi
call update_disk
xor eax, eax
cmp [hd_error], 0
jz @f
mov al, 11
@@:
ret
fs_HdGetFileInfo:
cmp [fat_type], 0
jnz @f
mov eax, ERROR_UNKNOWN_FS
ret
@@:
cmp byte [esi], 0
jnz @f
mov eax, 2
ret
@@:
push edi
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
pop edi
mov eax, 11
ret
@@:
popfd
jmp fs_GetFileInfo_finish
fs_HdSetFileInfo:
cmp [fat_type], 0
jnz @f
mov eax, ERROR_UNKNOWN_FS
ret
@@:
cmp byte [esi], 0
jnz @f
mov eax, 2
ret
@@:
push edi
call hd_find_lfn
pushfd
cmp [hd_error], 0
jz @f
popfd
pop edi
mov eax, 11
ret
@@:
popfd
jnc @f
pop edi
mov eax, ERROR_FILE_NOT_FOUND
ret
@@:
push eax
call bdfe_to_fat_entry
pop eax
mov ebx, buffer
call hd_write
call update_disk
pop edi
xor eax, eax
ret
;----------------------------------------------------------------
;
; fs_HdExecute - LFN variant for executing from harddisk
;
; esi points to hd filename (e.g. 'dir1/name')
; ebp points to full filename (e.g. '/hd0/1/dir1/name')
; dword [ebx] = flags
; dword [ebx+4] = cmdline
;
; ret ebx,edx destroyed
; eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
fs_HdExecute:
mov edx, [ebx]
mov ebx, [ebx+4]
test ebx, ebx
jz @f
add ebx, std_application_base_address
@@:
;----------------------------------------------------------------
;
; fs_HdExecute.flags - second entry
;
; esi points to floppy filename (kernel address)
; ebp points to full filename
; edx flags
; ebx cmdline (kernel address)
;
; ret eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
.flags:
cmp [fat_type], 0
jnz @f
mov eax, ERROR_UNKNOWN_FS
ret
@@:
cmp byte [esi], 0
jnz @f
; cannot execute root!
mov eax, -ERROR_ACCESS_DENIED
ret
@@:
push edi
call hd_find_lfn
jnc .found
pop edi
mov eax, -ERROR_FILE_NOT_FOUND
cmp [hd_error], 0
jz @f
mov al, -11
@@:
ret
.found:
mov eax, [edi+20-2]
mov ax, [edi+26]
push 0
push eax
push dword [edi+28] ; size
push .DoRead
call fs_execute
add esp, 16
pop edi
ret
.DoRead:
; read next block
; in: eax->parameters, edi->buffer
; out: eax = error code
pushad
cmp dword [eax], 0 ; file size
jz .eof
add eax, 4
call fat_get_sector
mov ebx, edi
call hd_read
cmp [hd_error], 0
jnz .err
mov eax, [esp+28]
mov ecx, [eax]
sub ecx, 512
jae @f
lea edi, [edi+ecx+512]
neg ecx
push eax
xor eax, eax
rep stosb
pop eax
@@:
mov [eax], ecx
mov edx, [eax+8]
inc edx
cmp edx, [SECTORS_PER_CLUSTER]
jb @f
push eax
mov eax, [eax+4]
call get_FAT
cmp [hd_error], 0
jnz .err
mov ecx, eax
pop eax
mov [eax+4], ecx
xor edx, edx
@@:
mov [eax+8], edx
popad
xor eax, eax
ret
.eof:
popad
mov eax, 6
ret
.err:
popad
mov eax, 11
ret
; \end{diamond}

/kernel/tags/kolibri0.6.0.0/fs/fat12.inc
0,0 → 1,2576
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; ;;
;; FAT12.INC ;;
;; (C) 2005 Mario79, License: GPL ;;
;; ;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
n_sector dd 0 ; temporary save for sector value
flp_status dd 0
clust_tmp_flp dd 0 ; used by analyze_directory and analyze_directory_to_write
path_pointer_flp dd 0
pointer_file_name_flp dd 0
save_root_flag db 0
save_flag db 0
root_read db 0 ; 0-necessary to load root, 1-not to load root
flp_fat db 0 ; 0-necessary to load fat, 1-not to load fat
flp_number db 0 ; 1- Floppy A, 2-Floppy B
old_track db 0 ; old value track
flp_label rb 15 ; Label and ID of inserted floppy disk
reserve_flp:
cli
cmp [flp_status],0
je reserve_flp_ok
sti
call change_task
jmp reserve_flp
reserve_flp_ok:
push eax
mov eax,[0x3000]
shl eax,5
mov eax,[eax+0x3000+TASKDATA.pid]
mov [flp_status],eax
pop eax
sti
ret
floppy_free_space:
;---------------------------------------------
;
; returns free space in edi
;
;---------------------------------------------
push eax ebx ecx
call read_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_2
mov eax,0x282004
xor edi,edi
mov ecx,2847 ;1448000/512
rdfs1_1:
mov ebx,[eax]
and ebx,4095
jne rdfs2_1
add edi,512
rdfs2_1:
add eax,2
loop rdfs1_1
fdc_status_error_2:
pop ecx ebx eax
ret
floppy_fileread:
;----------------------------------------------------------------
;
; fileread - sys floppy
;
; eax points to filename 11 chars - for root directory
; ebx first wanted block ; 1+ ; if 0 then set to 1
; ecx number of blocks to read ; 1+ ; if 0 then set to 1
; edx mem location to return data
; esi length of filename 12*X
; edi pointer to path /fd/1/...... - for all files in nested directories
;
; ret ebx = size or 0xffffffff file not found
; eax = 0 ok read or other = errormsg
; 10 = access denied
;--------------------------------------------------------------
mov [save_flag],0
mov [path_pointer_flp],edi
cmp esi,0 ; return ramdisk root
jne fr_noroot_1
cmp ebx,224/16
jbe fr_do_1
mov eax,5
mov ebx,0
mov [flp_status],0
ret
fr_do_1:
push ebx ecx edx
call read_flp_root
pop edx ecx ebx
cmp [FDC_Status],0
jne fdc_status_error_1
mov edi,edx
dec ebx
shl ebx,9
mov esi,0x8000
add esi,ebx
shl ecx,9
cld
rep movsb
mov eax,0 ; ok read
mov ebx,0
mov [flp_status],0
ret
fdc_status_error_1:
mov [flp_status],0
mov eax,10
mov ebx,-1
ret
fr_noroot_1:
sub esp,32
call expand_filename
frfloppy_1:
cmp ebx,0
jne frfl5_1
mov ebx,1
frfl5_1:
cmp ecx,0
jne frfl6_1
mov ecx,1
frfl6_1:
dec ebx
push eax
push eax ebx ecx edx esi edi
call read_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_3_1
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],1 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
call SeekTrack
mov dh,14
l.20_1:
call ReadSectWithRetr
cmp [FDC_Status],0
jne fdc_status_error_3_1
mov dl,16
mov edi,0xD000
inc [FDD_Sector]
l.21_1:
mov esi,eax ;Name of file we want
mov ecx,11
cld
rep cmpsb ;Found the file?
je fifound_1 ;Yes
add ecx,21
add edi, ecx ;Advance to next entry
dec dl
cmp dl,0
jne l.21_1
dec dh
cmp dh,0
jne l.20_1
fdc_status_error_3:
mov eax,5 ; file not found ?
mov ebx,-1
add esp,32+28
mov [flp_status],0
ret
fdc_status_error_3_2:
cmp [FDC_Status],0
je fdc_status_error_3
fdc_status_error_3_1:
add esp,32+28
jmp fdc_status_error_1
fifound_1:
mov eax,[path_pointer_flp]
cmp [eax+36],byte 0
je fifound_2
add edi,0xf
mov eax,[edi]
and eax,65535
mov ebx,[path_pointer_flp]
add ebx,36
call get_cluster_of_a_path_flp
jc fdc_status_error_3_2
mov ebx,[ebx-11+28] ;file size
mov [esp+20],ebx
mov [esp+24],ebx
jmp fifound_3
fifound_2:
mov ebx,[edi-11+28] ;file size
mov [esp+20],ebx
mov [esp+24],ebx
add edi,0xf
mov eax,[edi]
fifound_3:
and eax,65535
mov [n_sector],eax ;eax=cluster
frnew_1:
add eax,31 ;bootsector+2*fat+filenames
cmp [esp+16],dword 0 ; wanted cluster ?
jne frfl7_1
call read_chs_sector
cmp [FDC_Status],0
jne fdc_status_error_5
mov edi,[esp+8]
call give_back_application_data_1
add [esp+8],dword 512
dec dword [esp+12] ; last wanted cluster ?
cmp [esp+12],dword 0
je frnoread_1
jmp frfl8_1
frfl7_1:
dec dword [esp+16]
frfl8_1:
mov edi,[n_sector]
shl edi,1 ;find next cluster from FAT
add edi,0x282000
mov eax,[edi]
and eax,4095
mov edi,eax
mov [n_sector],edi
cmp edi,4095 ;eof - cluster
jz frnoread2_1
cmp [esp+24],dword 512 ;eof - size
jb frnoread_1
sub [esp+24],dword 512
jmp frnew_1
read_chs_sector:
call calculate_chs
call ReadSectWithRetr
ret
frnoread2_1:
cmp [esp+16],dword 0 ; eof without read ?
je frnoread_1
mov [fdc_irq_func],fdc_null
pop edi esi edx ecx
add esp,4
pop ebx ; ebx <- eax : size of file
add esp,36
mov eax,6 ; end of file
mov [flp_status],0
ret
frnoread_1:
pop edi esi edx ecx
add esp,4
pop ebx ; ebx <- eax : size of file
add esp,36
mov eax,0
mov [flp_status],0
ret
fdc_status_error_5:
pop edi esi edx ecx
add esp,4
pop ebx ; ebx <- eax : size of file
add esp,36
jmp fdc_status_error_1
read_flp_root:
pusha
call check_label
cmp [FDC_Status],0
jne unnecessary_root_read
cmp [root_read],1
je unnecessary_root_read
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],1 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
mov edi,0x8000
call SeekTrack
read_flp_root_1:
call ReadSectWithRetr
cmp [FDC_Status],0
jne unnecessary_root_read
push edi
call give_back_application_data_1
pop edi
add edi,512
inc [FDD_Sector]
cmp [FDD_Sector],16
jne read_flp_root_1
mov [root_read],1
unnecessary_root_read:
popa
ret
read_flp_fat:
pusha
call check_label
cmp [FDC_Status],0
jne unnecessary_flp_fat
cmp [flp_fat],1
je unnecessary_flp_fat
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],0 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
mov edi,0x8000
call SeekTrack
read_flp_fat_1:
call ReadSectWithRetr
cmp [FDC_Status],0
jne unnecessary_flp_fat
push edi
call give_back_application_data_1
pop edi
add edi,512
inc [FDD_Sector]
cmp [FDD_Sector],19
jne read_flp_fat_1
mov [FDD_Sector],1
mov [FDD_Head],1
call ReadSectWithRetr
cmp [FDC_Status],0
jne unnecessary_flp_fat
call give_back_application_data_1
call calculatefatchain_flp
mov [root_read],0
mov [flp_fat],1
unnecessary_flp_fat:
popa
ret
calculatefatchain_flp:
pushad
mov esi,0x8000
mov edi,0x282000
fcnew_1:
mov eax,dword [esi]
mov ebx,dword [esi+4]
mov ecx,dword [esi+8]
mov edx,ecx
shr edx,4 ;8 ok
shr dx,4 ;7 ok
xor ch,ch
shld ecx,ebx,20 ;6 ok
shr cx,4 ;5 ok
shld ebx,eax,12
and ebx,0x0fffffff ;4 ok
shr bx,4 ;3 ok
shl eax,4
and eax,0x0fffffff ;2 ok
shr ax,4 ;1 ok
mov dword [edi],eax
add edi,4
mov dword [edi],ebx
add edi,4
mov dword [edi],ecx
add edi,4
mov dword [edi],edx
add edi,4
add esi,12
cmp edi,0x282000+2856*2 ;2849 clusters
jnz fcnew_1
popad
ret
check_label:
pushad
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],0 ; Ñòîðîíà
mov [FDD_Sector],1 ; Ñåêòîð
call SetUserInterrupts
call FDDMotorON
call RecalibrateFDD
cmp [FDC_Status],0
jne fdc_status_error
call SeekTrack
cmp [FDC_Status],0
jne fdc_status_error
call ReadSectWithRetr
cmp [FDC_Status],0
jne fdc_status_error
mov esi,flp_label
mov edi,0xD000+39
mov ecx,15
cld
rep cmpsb
je same_label
mov [root_read],0
mov [flp_fat],0
same_label:
mov esi,0xD000+39
mov edi,flp_label
mov ecx,15
cld
rep movsb
popad
ret
fdc_status_error:
popad
ret
save_flp_root:
pusha
call check_label
cmp [FDC_Status],0
jne unnecessary_root_save
cmp [root_read],0
je unnecessary_root_save
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],1 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
mov esi,0x8000
call SeekTrack
save_flp_root_1:
push esi
call take_data_from_application_1
pop esi
add esi,512
call WriteSectWithRetr
cmp [FDC_Status],0
jne unnecessary_root_save
inc [FDD_Sector]
cmp [FDD_Sector],16
jne save_flp_root_1
unnecessary_root_save:
mov [fdc_irq_func],fdc_null
popa
ret
save_flp_fat:
pusha
call check_label
cmp [FDC_Status],0
jne unnecessary_flp_fat_save
cmp [flp_fat],0
je unnecessary_flp_fat_save
call restorefatchain_flp
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],0 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
mov esi,0x8000
call SeekTrack
save_flp_fat_1:
push esi
call take_data_from_application_1
pop esi
add esi,512
call WriteSectWithRetr
cmp [FDC_Status],0
jne unnecessary_flp_fat_save
inc [FDD_Sector]
cmp [FDD_Sector],19
jne save_flp_fat_1
mov [FDD_Sector],1
mov [FDD_Head],1
call take_data_from_application_1
call WriteSectWithRetr
cmp [FDC_Status],0
jne unnecessary_flp_fat_save
mov [root_read],0
unnecessary_flp_fat_save:
mov [fdc_irq_func],fdc_null
popa
ret
restorefatchain_flp: ; restore fat chain
pushad
mov esi,0x282000
mov edi,0x8000
fcnew2_1:
mov eax,dword [esi]
mov ebx,dword [esi+4]
shl ax,4
shl eax,4
shl bx,4
shr ebx,4
shrd eax,ebx,8
shr ebx,8
mov dword [edi],eax
add edi,4
mov word [edi],bx
add edi,2
add esi,8
cmp edi,0x8000+0x1200 ;4274 bytes - all used FAT
jb fcnew2_1
mov esi,0x8000 ; duplicate fat chain
mov edi,0x8000+0x1200
mov ecx,0x1200/4
cld
rep movsd
popad
ret
floppy_filedelete:
;--------------------------------------------
;
; filedelete - sys floppy
; in:
; eax - filename 11 chars - for root directory
; edi pointer to path /fd/1/...... - for all files in nested directories
;
; out:
; eax - 0 = successful, 1 = file not found, 10 = access denied
;
;--------------------------------------------
mov [path_pointer_flp],edi
mov [save_flag],0
mov ebp,1 ; file not found as default
filedelete_newtry_1:
sub esp,32
call expand_filename
push eax ebx ecx edx esi edi
call read_flp_fat
cmp [FDC_Status],0
jne frnoreadd_1
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],1 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
call SeekTrack
mov dh,14
l.20_2:
call ReadSectWithRetr
cmp [FDC_Status],0
jne fdc_status_error_4
mov dl,16
mov edi,0xD000
inc [FDD_Sector]
l.21_2:
mov esi,eax ;Name of file we want
mov ecx,11
cld
rep cmpsb ;Found the file?
je fifoundd_1 ;Yes
add ecx,21
add edi, ecx ;Advance to next entry
dec dl
jne l.21_2
dec dh
jne l.20_2
jmp frnoreadd_1
fdc_status_error_4:
pop edi esi edx ecx ebx eax
add esp,32
jmp fdc_status_error_1
fifoundd_1:
mov eax,[path_pointer_flp]
cmp [eax+36],byte 0
je fifoundd_2
movzx eax, word [edi+0xf]
mov ebx,[path_pointer_flp]
add ebx,36
call get_cluster_of_a_path_flp
jc frnoreadd_1_1
mov edi,ebx
add edi,11
jmp fifoundd_2_1
fifoundd_2:
dec [FDD_Sector]
fifoundd_2_1:
mov [edi-11],byte 0xE5 ;mark filename deleted
movzx edi, word [edi+0xf] ;edi = cluster
frnewd_1:
shl edi,1 ;find next cluster from FAT
add edi,0x282000
mov eax,[edi]
mov [edi],word 0x0 ;clear fat chain cluster
and eax,4095
mov edi,eax
cmp edi,dword 4095 ;last cluster ?
jz frnoreadd2_1
jmp frnewd_1
frnoreadd2_1:
call WriteSectWithRetr
cmp [FDC_Status],0
jne fdc_status_error_4
call save_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_4
; pop edi esi edx ecx ebx eax
; add esp,32
mov ebp,0 ; file found
; jmp filedelete_newtry_1
jmp frnoreadd_1
frnoreadd_1_1:
cmp [FDC_Status],0
jne fdc_status_error_4
frnoreadd_1:
pop edi esi edx ecx ebx eax
add esp,32
mov eax,ebp
ret
floppy_filesave:
;----------------------------------------------------------
;
; filesave - sys floppy
;
; eax ; pointer to file name 11 chars - for root directory
; ebx ; buffer
; ecx ; count to write in bytes
; edx ; 0 create new , 1 append
; edi pointer to path /fd/1/...... - for all files in nested directories
;
; output : eax = 0 - ok
; 5 - file not found / directory not found
; 8 - disk full
; 10 - access denied
;-----------------------------------------------------------
mov [path_pointer_flp],edi
sub esp,32
call expand_filename
cmp edx,0
jnz fsdel_1
pusha
call floppy_filedelete
cmp [FDC_Status],0
jne fdc_status_error_6
popa
mov [save_flag],1
fsdel_1:
call floppy_free_space
cmp [FDC_Status],0
jne fdc_status_error_6
cmp ecx,edi
jb rd_do_save_1
add esp,32
mov eax,8 ; not enough free space
mov [flp_status],0
ret
fdc_status_error_6:
popa
add esp,32
jmp fdc_status_error_1
rd_do_save_1:
push eax ebx ecx edx esi edi
call read_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_7
push eax
mov eax,[path_pointer_flp]
cmp [eax+36],byte 0
jne fifoundds_2
pop eax
mov [save_root_flag],1
call read_flp_root
cmp [FDC_Status],0
jne fdc_status_error_7
mov edi,0x8000 ;Point at directory
mov edx,224 +1
; find an empty spot for filename in the root dir
l20ds_1:
sub edx,1
jz frnoreadds_1
l21ds_1:
cmp [edi],byte 0xE5
jz fifoundds_1
cmp [edi],byte 0x0
jz fifoundds_1
add edi,32 ; Advance to next entry
jmp l20ds_1
fifoundds_2:
pop eax
mov [save_root_flag],0
mov [FDD_Track],0 ; Öèëèíäð
mov [FDD_Head],1 ; Ñòîðîíà
mov [FDD_Sector],2 ; Ñåêòîð
call SeekTrack
mov dh,14
l.20_3:
call ReadSectWithRetr
cmp [FDC_Status],0
jne fdc_status_error_7
mov dl,16
mov edi,0xD000
inc [FDD_Sector]
l.21_3:
mov esi,eax ;Name of file we want
mov ecx,11
cld
rep cmpsb ;Found the file?
je fifoundds_3 ;Yes
add ecx,21
add edi, ecx ;Advance to next entry
dec dl
jne l.21_3
dec dh
jne l.20_3
fdc_status_error_8:
pop edi esi edx ecx ebx eax
mov eax,5 ; file not found ?
mov ebx,-1
add esp,32
mov [flp_status],0
ret
fifoundds_3:
add edi,0xf
mov eax,[edi]
and eax,65535
mov ebx,[path_pointer_flp]
add ebx,36
call get_cluster_of_a_path_flp
jc fdc_status_error_7_1
found_directory_for_writing_flp:
call analyze_directory_to_write_flp
jc fdc_status_error_7_1
mov edi,ebx
fifoundds_1:
push edi ; move the filename to root dir
mov esi,[esp+4+20]
cmp [save_root_flag],0
jne fifoundds_4
mov esi,[pointer_file_name_flp]
fifoundds_4:
mov ecx,11
cld
rep movsb
pop edi
mov edx,edi
add edx,11+0xf ; edx <- cluster save position
mov ebx,[esp+12] ; save file size
mov [edi+28],ebx
mov [edi+11],byte 0x20 ; attribute
call get_date_for_file ; from FAT32.INC
mov [edi+24],ax ; date
mov [edi+18],ax ; date
call get_time_for_file ; from FAT32.INC
mov [edi+22],ax ; time
xor ax,ax
mov [edi+20],ax
mov ebx,1 ; first cluster
cmp [save_root_flag],0
jne frnewds_1
call frnewds_2
pusha
call WriteSectWithRetr
popa
cmp [FDC_Status],0
jne fdc_status_error_7
jmp frnewds_3
frnewds_1:
call frnewds_2
frnewds_3:
pusha ; move save to floppy cluster
add ebx,31
mov eax,ebx
mov esi,[esp+32+16]
call take_data_from_application_1
call save_chs_sector
cmp [FDC_Status],0
jne fdc_status_error_7
popa
mov eax,[esp+12]
cmp eax,512
jb flnsa_1
sub eax,512
mov [esp+12],eax
mov eax,[esp+16]
add eax,512
mov [esp+16],eax
jmp frnewds_1
frnewds_2:
add ebx,1
mov edi,ebx ; find free cluster in FAT
shl edi,1
add edi,0x282000
mov eax,[edi]
and eax,4095
jnz frnewds_2
mov [edx],bx ; save next cluster pos. to prev cl.
mov edx,edi ; next save pos abs mem add
ret
flnsa_1:
mov [edi],word 4095 ; mark end of file - last cluster
cmp [save_root_flag],1
jne flnsa_2
call save_flp_root
cmp [FDC_Status],0
jne fdc_status_error_7
flnsa_2:
call save_flp_fat
cmp [FDC_Status],0
jne fdc_status_error_7
frnoreadds_1:
pop edi esi edx ecx ebx eax
add esp,32
mov eax,0
mov [flp_status],0
ret
fdc_status_error_7_1:
cmp [FDC_Status],0
je fdc_status_error_8
fdc_status_error_7:
pop edi esi edx ecx ebx eax
add esp,32
jmp fdc_status_error_1
save_chs_sector:
call calculate_chs
call WriteSectWithRetr
ret
calculate_chs:
mov bl,[FDD_Track]
mov [old_track],bl
mov ebx,18
xor edx,edx
div ebx
inc edx
mov [FDD_Sector],dl
xor edx,edx
mov ebx,2
div ebx
mov [FDD_Track],al
mov [FDD_Head],0
cmp edx,0
je no_head_2
inc [FDD_Head]
no_head_2:
mov dl,[old_track]
cmp dl,[FDD_Track]
je no_seek_track_1
call SeekTrack
no_seek_track_1:
ret
get_cluster_of_a_path_flp:
;---------------------------------------------------------
; input : EBX = pointer to a path string
; (example: the path "/files/data/document" become
; "files......data.......document...0"
; '.' = space char
; '0' = char(0) (ASCII=0) !!! )
; output : if (CARRY=1) -> ERROR in the PATH
; if (CARRY=0) -> EAX=cluster
;---------------------------------------------------------
push edx
mov edx,ebx
search_end_of_path_flp:
cmp [save_flag],0
jne search_end_of_path_flp_1
cmp byte [edx],0
je found_end_of_path_flp
jmp search_end_of_path_flp_2
search_end_of_path_flp_1:
cmp byte [edx+12],0
je found_end_of_path_flp
search_end_of_path_flp_2:
inc edx ; '/'
call analyze_directory_flp
jc directory_not_found_flp
mov eax,[ebx+20-2] ; read the HIGH 16bit cluster field
mov ax,[ebx+26] ; read the LOW 16bit cluster field
and eax,0xfff ;[fatMASK]
add edx,11 ; 8+3 (name+extension)
jmp search_end_of_path_flp
found_end_of_path_flp:
inc edx
mov [pointer_file_name_flp],edx
pop edx
clc ; no errors
ret
directory_not_found_flp:
pop edx
stc ; errors occour
ret
analyze_directory_flp:
;--------------------------------
; input : EAX = first cluster of the directory
; EBX = pointer to filename
; output : IF CARRY=0 EAX = sector where th file is found
; EBX = pointer in buffer
; [buffer .. buffer+511]
; ECX,EDX,EDI,EDI not changed
; IF CARRY=1
;--------------------------------
push ebx ;[esp+16]
push ecx
push edx
push esi
push edi
adr56_flp:
mov [clust_tmp_flp],eax
add eax,31
pusha
call read_chs_sector
popa
cmp [FDC_Status],0
jne not_found_file_analyze_flp
mov ecx,512/32
mov ebx,0xD000
adr1_analyze_flp:
mov esi,edx ;[esp+16]
mov edi,ebx
cld
push ecx
mov ecx,11
rep cmpsb
pop ecx
je found_file_analyze_flp
add ebx,32
loop adr1_analyze_flp
mov eax,[clust_tmp_flp]
shl eax,1 ;find next cluster from FAT
add eax,0x282000
mov eax,[eax]
and eax,4095
cmp eax,0x0ff8
jb adr56_flp
not_found_file_analyze_flp:
pop edi
pop esi
pop edx
pop ecx
add esp,4
stc ;file not found
ret
found_file_analyze_flp:
pop edi
pop esi
pop edx
pop ecx
add esp,4
clc ;file found
ret
analyze_directory_to_write_flp:
;--------------------------------
; input : EAX = first cluster of the directory
; output : IF CARRY=0 EAX = sector where the file is found
; EBX = pointer in buffer
; [buffer .. buffer+511]
; ECX,EDX,EDI,EDI not changed
; IF CARRY=1
;--------------------------------
push ecx
push edx
push esi
adr561:
mov [clust_tmp_flp],eax
add eax,31
pusha
call read_chs_sector
popa
cmp [FDC_Status],0
jne error_found_file_analyze1
mov ecx,512/32
mov ebx,0xD000
adr1_analyze1:
cmp byte [ebx],0x00
je found_file_analyze1
cmp byte [ebx],0xe5
je found_file_analyze1
avanti:
add ebx,32
loop adr1_analyze1
mov eax,[clust_tmp_flp]
shl eax,1 ;find next cluster from FAT
add eax,0x282000
mov eax,[eax]
and eax,4095
cmp eax,0x0ff8
jb adr561
call get_free_FAT ;this block of code add a new cluster
;for the directory because the directory
;is full
mov [edi],word 0x0fff
mov eax,[clust_tmp_flp]
shl eax,1 ;find next cluster from FAT
add eax,0x282000
sub edi,0x282000
mov [eax],di
pusha
mov ecx,512/4
xor eax,eax
mov edi,0xD000
cld
rep stosd
popa
mov eax,edi
add eax,31
pusha
call save_chs_sector
popa
cmp [FDC_Status],0
jne error_found_file_analyze1
mov ebx,0xD000
found_file_analyze1:
pop esi
pop edx
pop ecx
clc ;file found
ret
error_found_file_analyze1:
pop esi
pop edx
pop ecx
stc
ret
get_free_FAT_flp:
;------------------------------------------
; input : EAX = # cluster for start the searching
; output : EAX = # first cluster found free
;-------------------------------------------
push ebx
mov ebx,1
check_new_flp:
add ebx,1
mov edi,ebx ; find free cluster in FAT
shl edi,1
add edi,0x282000
mov eax,[edi]
and eax,4095
cmp eax,0x0
jnz check_new_flp
pop ebx
ret
; \begin{diamond}
fat_find_lfn:
; in: esi->name
; [esp+4] = next
; [esp+8] = first
; [esp+C]... - possibly parameters for first and next
; out: CF=1 - file not found
; else CF=0, esi->next name component, edi->direntry
pusha
lea eax, [esp+0Ch+20h]
call dword [eax-4]
jc .reterr
sub esp, 262*2 ; reserve place for LFN
mov ebp, esp
push 0 ; for fat_get_name: read ASCII name
.l1:
call fat_get_name
jc .l2
call fat_compare_name
jz .found
.l2:
lea eax, [esp+0Ch+20h+262*2+4]
call dword [eax-8]
jnc .l1
add esp, 262*2+4
.reterr:
stc
popa
ret
.found:
add esp, 262*2+4
; if this is LFN entry, advance to true entry
cmp byte [edi+11], 0xF
jnz @f
lea eax, [esp+0Ch+20h]
call dword [eax-8]
jc .reterr
@@:
add esp, 8 ; CF=0
push esi
push edi
popa
ret
flp_root_next:
cmp edi, 0xD200-0x20
jae @f
add edi, 0x20
ret ; CF=0
@@:
; read next sector
inc dword [eax]
cmp dword [eax], 14
jae flp_root_first.readerr
flp_root_first:
mov eax, [eax]
pusha
add eax, 19
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .readerr
mov edi, 0xD000
ret ; CF=0
.readerr:
stc
ret
flp_rootmem_first:
mov edi, 0x8000
clc
ret
flp_rootmem_next:
add edi, 0x20
cmp edi, 0x8000+14*0x200
cmc
flp_rootmem_next_write:
flp_rootmem_begin_write:
flp_rootmem_end_write:
ret
flp_rootmem_extend_dir:
stc
ret
flp_notroot_next:
cmp edi, 0xD200-0x20
jae flp_notroot_next_sector
add edi, 0x20
ret ; CF=0
flp_notroot_next_sector:
push ecx
mov ecx, [eax]
mov ecx, [ecx*2+0x282000]
and ecx, 0xFFF
cmp ecx, 2849
jae flp_notroot_first.err2
mov [eax], ecx
pop ecx
flp_notroot_first:
mov eax, [eax]
cmp eax, 2
jb .err
cmp eax, 2849
jae .err
pusha
add eax, 31
call read_chs_sector
popa
mov edi, 0xD000
cmp [FDC_Status], 0
jnz .err
ret ; CF=0
.err2:
pop ecx
.err:
stc
ret
flp_notroot_begin_write:
pusha
mov eax, [eax]
add eax, 31
call read_chs_sector
popa
ret
flp_notroot_end_write:
pusha
mov eax, [eax]
add eax, 31
call save_chs_sector
popa
ret
flp_notroot_next_write:
cmp edi, 0xD200
jae @f
ret
@@:
call flp_notroot_end_write
jmp flp_notroot_next_sector
flp_notroot_extend_dir:
; find free cluster in FAT
pusha
xor eax, eax
mov edi, 0x282000
mov ecx, 2849
repnz scasw
jnz .notfound
mov word [edi-2], 0xFFF ; mark as last cluster
sub edi, 0x282000
shr edi, 1
dec edi
mov eax, [esp+28]
mov ecx, [eax]
mov [0x282000+ecx*2], di
mov [eax], edi
xor eax, eax
mov edi, 0xD000
mov ecx, 128
rep stosd
popa
call flp_notroot_end_write
mov edi, 0xD000
clc
ret
.notfound:
popa
stc
ret
fd_find_lfn:
; in: esi->name
; out: CF=1 - file not found
; else CF=0 and edi->direntry, eax=directory cluster (0 for root)
push esi edi
push 0
push flp_root_first
push flp_root_next
.loop:
call fat_find_lfn
jc .notfound
cmp byte [esi], 0
jz .found
test byte [edi+11], 10h
jz .notfound
movzx eax, word [edi+26] ; cluster
mov [esp+8], eax
mov dword [esp+4], flp_notroot_first
mov dword [esp], flp_notroot_next
jmp .loop
.notfound:
add esp, 12
pop edi esi
stc
ret
.found:
mov eax, [esp+8]
add eax, 31
cmp dword [esp], flp_root_next
jnz @f
add eax, -31+19
@@:
add esp, 16 ; CF=0
pop esi
ret
;----------------------------------------------------------------
;
; fs_FloppyRead - LFN variant for reading floppy
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to read, 0+
; edx mem location to return data
;
; ret ebx = bytes read or 0xffffffff file not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_FloppyRead:
call read_flp_fat
cmp byte [esi], 0
jnz @f
or ebx, -1
mov eax, 10 ; access denied
ret
@@:
push edi
call fd_find_lfn
jnc .found
pop edi
or ebx, -1
mov eax, 5 ; file not found
ret
.found:
test ebx, ebx
jz .l1
cmp dword [ebx+4], 0
jz @f
xor ebx, ebx
.reteof:
mov eax, 6 ; EOF
pop edi
ret
@@:
mov ebx, [ebx]
.l1:
push ecx edx
push 0
mov eax, [edi+28]
sub eax, ebx
jb .eof
cmp eax, ecx
jae @f
mov ecx, eax
mov byte [esp], 6 ; EOF
@@:
movzx edi, word [edi+26]
.new:
jecxz .done
test edi, edi
jz .eof
cmp edi, 0xFF8
jae .eof
sub ebx, 512
jae .skip
lea eax, [edi+31]
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .err
lea eax, [0xD000+ebx+512]
neg ebx
push ecx
cmp ecx, ebx
jbe @f
mov ecx, ebx
@@:
mov ebx, edx
call memmove
add edx, ecx
sub [esp], ecx
pop ecx
xor ebx, ebx
.skip:
movzx edi, word [edi*2+0x282000]
jmp .new
.done:
mov ebx, edx
pop eax edx ecx edi
sub ebx, edx
ret
.eof:
mov ebx, edx
pop eax edx ecx
jmp .reteof
.err:
mov ebx, edx
pop eax edx ecx edi
sub ebx, edx
mov al, 11
ret
;----------------------------------------------------------------
;
; fs_FloppyReadFolder - LFN variant for reading floppy folders
;
; esi points to filename
; ebx pointer to structure: 32-bit number = first wanted block, 0+
; & flags (bitfields)
; flags: bit 0: 0=ANSI names, 1=UNICODE names
; ecx number of blocks to read, 0+
; edx mem location to return data
;
; ret ebx = blocks read or 0xffffffff folder not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_FloppyReadFolder:
call read_flp_fat
push edi
cmp byte [esi], 0
jz .root
call fd_find_lfn
jnc .found
pop edi
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.found:
test byte [edi+11], 0x10 ; do not allow read files
jnz .found_dir
pop edi
or ebx, -1
mov eax, ERROR_ACCESS_DENIED
ret
.found_dir:
movzx eax, word [edi+26]
add eax, 31
push 0
jmp .doit
.root:
mov eax, 19
push 14
.doit:
push ecx ebp
sub esp, 262*2 ; reserve space for LFN
mov ebp, esp
push dword [ebx+4] ; for fat_get_name: read ANSI/UNICODE names
mov ebx, [ebx]
; init header
push eax ecx
mov edi, edx
mov ecx, 32/4
xor eax, eax
rep stosd
pop ecx eax
mov byte [edx], 1 ; version
mov esi, edi ; esi points to BDFE
.main_loop:
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .error
mov edi, 0xD000
push eax
.l1:
call fat_get_name
jc .l2
cmp byte [edi+11], 0xF
jnz .do_bdfe
add edi, 0x20
cmp edi, 0xD200
jb .do_bdfe
pop eax
inc eax
dec byte [esp+262*2+12]
jz .done
jns @f
; read next sector from FAT
mov eax, [(eax-31-1)*2+0x282000]
and eax, 0xFFF
cmp eax, 0xFF8
jae .done
add eax, 31
mov byte [esp+262*2+12], 0
@@:
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .error
mov edi, 0xD000
push eax
.do_bdfe:
inc dword [edx+8] ; new file found
dec ebx
jns .l2
dec ecx
js .l2
inc dword [edx+4] ; new file block copied
call fat_entry_to_bdfe
.l2:
add edi, 0x20
cmp edi, 0xD200
jb .l1
pop eax
inc eax
dec byte [esp+262*2+12]
jz .done
jns @f
; read next sector from FAT
mov eax, [(eax-31-1)*2+0x282000]
and eax, 0xFFF
cmp eax, 0xFF8
jae .done
add eax, 31
mov byte [esp+262*2+12], 0
@@:
jmp .main_loop
.error:
add esp, 262*2+4
pop ebp ecx edi edi
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.done:
add esp, 262*2+4
pop ebp
mov ebx, [edx+4]
xor eax, eax
dec ecx
js @f
mov al, ERROR_END_OF_FILE
@@:
pop ecx edi edi
ret
;----------------------------------------------------------------
;
; fs_FloppyRewrite - LFN variant for writing sys floppy
;
; esi points to filename
; ebx ignored (reserved)
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = number of written bytes
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
@@:
mov eax, ERROR_ACCESS_DENIED
xor ebx, ebx
ret
fsfrfe2:
popad
fsfrfe:
mov eax, 11
xor ebx, ebx
ret
fs_FloppyRewrite:
cmp byte [esi], 0
jz @b
call read_flp_fat
cmp [FDC_Status], 0
jnz fsfrfe
pushad
xor ebp, ebp
push esi
@@:
lodsb
test al, al
jz @f
cmp al, '/'
jnz @b
lea ebp, [esi-1]
jmp @b
@@:
pop esi
test ebp, ebp
jnz .noroot
call read_flp_root
cmp [FDC_Status], 0
jnz fsfrfe2
push flp_rootmem_extend_dir
push flp_rootmem_end_write
push flp_rootmem_next_write
push flp_rootmem_begin_write
xor ebp, ebp
push ebp
push flp_rootmem_first
push flp_rootmem_next
jmp .common1
.noroot:
; check existence
mov byte [ebp], 0
call fd_find_lfn
mov byte [ebp], '/'
lea esi, [ebp+1]
jnc @f
mov eax, ERROR_FILE_NOT_FOUND
.ret1:
mov [esp+28], eax
popad
xor ebx, ebx
ret
@@:
test byte [edi+11], 0x10 ; must be directory
mov eax, ERROR_ACCESS_DENIED
jz .ret1
movzx ebp, word [edi+26] ; ebp=cluster
mov eax, ERROR_FAT_TABLE
cmp ebp, 2
jb .ret1
cmp ebp, 2849
jae .ret1
push flp_notroot_extend_dir
push flp_notroot_end_write
push flp_notroot_next_write
push flp_notroot_begin_write
push ebp
push flp_notroot_first
push flp_notroot_next
.common1:
call fat_find_lfn
jc .notfound
; found; must not be directory
test byte [edi+11], 10h
jz @f
add esp, 28
popad
mov eax, ERROR_ACCESS_DENIED
xor ebx, ebx
ret
@@:
; delete FAT chain
push edi
xor eax, eax
mov dword [edi+28], eax ; zero size
xchg ax, word [edi+26] ; start cluster
test eax, eax
jz .done1
@@:
cmp eax, 0xFF8
jae .done1
lea edi, [0x282000 + eax*2] ; position in FAT
xor eax, eax
xchg ax, [edi]
jmp @b
.done1:
pop edi
call get_time_for_file
mov [edi+22], ax
call get_date_for_file
mov [edi+24], ax
mov [edi+18], ax
or byte [edi+11], 20h ; set 'archive' attribute
jmp .doit
.notfound:
; file is not found; generate short name
call fat_name_is_legal
jc @f
add esp, 28
popad
mov eax, ERROR_FILE_NOT_FOUND
xor ebx, ebx
ret
@@:
sub esp, 12
mov edi, esp
call fat_gen_short_name
.test_short_name_loop:
push esi edi ecx
mov esi, edi
lea eax, [esp+12+12+8]
mov [eax], ebp
call dword [eax-4]
jc .found
.test_short_name_entry:
cmp byte [edi+11], 0xF
jz .test_short_name_cont
mov ecx, 11
push esi edi
repz cmpsb
pop edi esi
jz .short_name_found
.test_short_name_cont:
lea eax, [esp+12+12+8]
call dword [eax-8]
jnc .test_short_name_entry
jmp .found
.short_name_found:
pop ecx edi esi
call fat_next_short_name
jnc .test_short_name_loop
.disk_full:
add esp, 12+28
popa
mov eax, ERROR_DISK_FULL
xor ebx, ebx
ret
.found:
pop ecx edi esi
; now find space in directory
; we need to save LFN <=> LFN is not equal to short name <=> generated name contains '~'
mov al, '~'
push ecx edi
mov ecx, 8
repnz scasb
push 1
pop eax ; 1 entry
jnz .notilde
; we need ceil(strlen(esi)/13) additional entries = floor((strlen(esi)+12+13)/13) total
xor eax, eax
@@:
cmp byte [esi], 0
jz @f
inc esi
inc eax
jmp @b
@@:
sub esi, eax
add eax, 12+13
mov ecx, 13
push edx
cdq
div ecx
pop edx
.notilde:
push -1
push -1
; find <eax> successive entries in directory
xor ecx, ecx
push eax
lea eax, [esp+12+8+12+8]
mov [eax], ebp
call dword [eax-4]
pop eax
jnc .scan_dir
.fsfrfe3:
add esp, 8+8+12+28
popad
mov eax, 11
xor ebx, ebx
ret
.scan_dir:
cmp byte [edi], 0
jz .free
cmp byte [edi], 0xE5
jz .free
xor ecx, ecx
.scan_cont:
push eax
lea eax, [esp+12+8+12+8]
call dword [eax-8]
pop eax
jnc .scan_dir
cmp [FDC_Status], 0
jnz .fsfrfe3
push eax
lea eax, [esp+12+8+12+8]
call dword [eax+16] ; extend directory
pop eax
jnc .scan_dir
add esp, 8+8+12+28
popad
mov eax, ERROR_DISK_FULL
xor ebx, ebx
ret
.free:
test ecx, ecx
jnz @f
mov [esp], edi
mov ecx, [esp+8+8+12+8]
mov [esp+4], ecx
xor ecx, ecx
@@:
inc ecx
cmp ecx, eax
jb .scan_cont
; found!
; calculate name checksum
push esi ecx
mov esi, [esp+8+8]
mov ecx, 11
xor eax, eax
@@:
ror al, 1
add al, [esi]
inc esi
loop @b
pop ecx esi
pop edi
pop dword [esp+8+12+8]
; edi points to first entry in free chunk
dec ecx
jz .nolfn
push esi
push eax
lea eax, [esp+8+8+12+8]
call dword [eax+4] ; begin write
mov al, 40h
.writelfn:
or al, cl
mov esi, [esp+4]
push ecx
dec ecx
imul ecx, 13
add esi, ecx
stosb
mov cl, 5
call fs_RamdiskRewrite.read_symbols
mov ax, 0xF
stosw
mov al, [esp+4]
stosb
mov cl, 6
call fs_RamdiskRewrite.read_symbols
xor eax, eax
stosw
mov cl, 2
call fs_RamdiskRewrite.read_symbols
pop ecx
lea eax, [esp+8+8+12+8]
call dword [eax+8] ; next write
xor eax, eax
loop .writelfn
pop eax
pop esi
; lea eax, [esp+8+12+8]
; call dword [eax+12] ; end write
.nolfn:
xchg esi, [esp]
mov ecx, 11
rep movsb
mov word [edi], 20h ; attributes
sub edi, 11
pop esi ecx
add esp, 12
mov byte [edi+13], 0 ; tenths of a second at file creation time
call get_time_for_file
mov [edi+14], ax ; creation time
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+16], ax ; creation date
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
and word [edi+20], 0 ; high word of cluster
and word [edi+26], 0 ; low word of cluster - to be filled
and dword [edi+28], 0 ; file size - to be filled
.doit:
lea eax, [esp+8]
call dword [eax+12] ; flush directory
push ecx
push edi
push 0
mov esi, edx
jecxz .done
mov ecx, 2849
mov edi, 0x282000
push 0 ; first cluster
.write_loop:
; allocate new cluster
xor eax, eax
repnz scasw
mov al, ERROR_DISK_FULL
jnz .ret
dec edi
dec edi
lea eax, [edi-0x282000]
shr eax, 1 ; eax = cluster
mov word [edi], 0xFFF ; mark as last cluster
xchg edi, [esp+4]
cmp dword [esp], 0
jz .first
stosw
jmp @f
.first:
mov [esp], eax
@@:
mov edi, [esp+4]
inc ecx
; write data
push ecx edi
mov ecx, 512
cmp dword [esp+20], ecx
jae @f
mov ecx, [esp+20]
@@:
push ecx
mov edi, 0xD000
rep movsb
pop ecx
push ecx
sub ecx, 512
neg ecx
push eax
xor eax, eax
rep stosb
pop eax
add eax, 31
pusha
call save_chs_sector
popa
pop ecx
cmp [FDC_Status], 0
jnz .diskerr
sub [esp+20], ecx
pop edi ecx
jnz .write_loop
.done:
xor eax, eax
.ret:
pop ebx edi edi ecx
mov [esp+28+28], eax
lea eax, [esp+8]
call dword [eax+4]
mov [edi+26], bx
mov ebx, esi
sub ebx, edx
mov [edi+28], ebx
call dword [eax+12]
mov [esp+28+16], ebx
test ebp, ebp
jnz @f
call save_flp_root
@@:
add esp, 28
cmp [FDC_Status], 0
jnz .err3
call save_flp_fat
cmp [FDC_Status], 0
jnz .err3
popa
ret
.err3:
popa
mov al, 11
xor ebx, ebx
ret
.diskerr:
sub esi, ecx
mov eax, 11
pop edi ecx
jmp .ret
;----------------------------------------------------------------
;
; fs_FloppyWrite - LFN variant for writing to floppy
;
; esi points to filename
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to write, 0+
; edx mem location to data
;
; ret ebx = bytes written (maybe 0)
; eax = 0 ok write or other = errormsg
;
;--------------------------------------------------------------
@@:
push ERROR_ACCESS_DENIED
fs_FloppyWrite.ret0:
pop eax
xor ebx, ebx
ret
fs_FloppyWrite.ret11:
push 11
jmp fs_FloppyWrite.ret0
fs_FloppyWrite:
cmp byte [esi], 0
jz @b
call read_flp_fat
cmp [FDC_Status], 0
jnz .ret11
pushad
call fd_find_lfn
jnc .found
popad
push ERROR_FILE_NOT_FOUND
jmp .ret0
.found:
; FAT does not support files larger than 4GB
test ebx, ebx
jz .l1
cmp dword [ebx+4], 0
jz @f
.eof:
popad
push ERROR_END_OF_FILE
jmp .ret0
@@:
mov ebx, [ebx]
.l1:
; now edi points to direntry, ebx=start byte to write,
; ecx=number of bytes to write, edx=data pointer
; extend file if needed
add ecx, ebx
jc .eof ; FAT does not support files larger than 4GB
push eax ; save directory cluster
push 0 ; return value=0
call get_time_for_file
mov [edi+22], ax ; last write time
call get_date_for_file
mov [edi+24], ax ; last write date
mov [edi+18], ax ; last access date
push dword [edi+28] ; save current file size
cmp ecx, [edi+28]
jbe .length_ok
cmp ecx, ebx
jz .length_ok
call floppy_extend_file
jnc .length_ok
mov [esp+4], eax
; floppy_extend_file can return two error codes: FAT table error or disk full.
; First case is fatal error, in second case we may write some data
cmp al, ERROR_DISK_FULL
jz .disk_full
pop eax
pop eax
mov [esp+4+28], eax
pop eax
popad
xor ebx, ebx
ret
.disk_full:
; correct number of bytes to write
mov ecx, [edi+28]
cmp ecx, ebx
ja .length_ok
.ret:
pop eax
pop eax
mov [esp+4+28], eax ; eax=return value
pop eax
sub edx, [esp+20]
mov [esp+16], edx ; ebx=number of written bytes
popad
ret
.length_ok:
; save FAT & directory
; note that directory must be saved first because save_flp_fat uses buffer at 0xD000
mov esi, [edi+28]
movzx edi, word [edi+26] ; starting cluster
mov eax, [esp+8]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err
call save_flp_fat
cmp [FDC_Status], 0
jz @f
.device_err:
mov byte [esp+4], 11
jmp .ret
@@:
; now ebx=start pos, ecx=end pos, both lie inside file
sub ecx, ebx
jz .ret
call SetUserInterrupts
.write_loop:
lea eax, [edi+31] ; current sector
; get length of data in current sector
push ecx
sub ebx, 0x200
jb .hasdata
neg ebx
xor ecx, ecx
jmp @f
.hasdata:
neg ebx
cmp ecx, ebx
jbe @f
mov ecx, ebx
@@:
; load sector if needed
cmp dword [esp+4], 0 ; we don't need to read uninitialized data
jz .noread
cmp ecx, 0x200 ; we don't need to read sector if it is fully rewritten
jz .noread
cmp ecx, esi ; (same for the last sector)
jz .noread
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jz @f
.device_err2:
pop ecx
jmp .device_err
@@:
.noread:
; zero uninitialized data if file was extended (because floppy_extend_file does not this)
push eax ecx edi
xor eax, eax
mov ecx, 0x200
sub ecx, [esp+4+12]
jbe @f
mov edi, 0xD000
add edi, [esp+4+12]
rep stosb
@@:
; zero uninitialized data in the last sector
mov ecx, 0x200
sub ecx, esi
jbe @f
mov edi, 0xD000
add edi, esi
rep stosb
@@:
pop edi ecx eax
; copy new data
push eax
mov eax, edx
neg ebx
jecxz @f
add ebx, 0xD000+0x200
call memmove
xor ebx, ebx
@@:
pop eax
; save sector
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err2
add edx, ecx
sub [esp], ecx
pop ecx
jz .done
.next_cluster:
movzx edi, word [edi*2+0x282000]
sub esi, 0x200
jae @f
xor esi, esi
@@:
sub dword [esp], 0x200
jae .write_loop
and dword [esp], 0
jmp .write_loop
.done:
mov [fdc_irq_func], fdc_null
jmp .ret
floppy_extend_file.zero_size:
xor eax, eax
jmp floppy_extend_file.start_extend
; extends file on floppy to given size (new data area is undefined)
; in: edi->direntry, ecx=new size
; out: CF=0 => OK, eax=0
; CF=1 => error, eax=code (ERROR_FAT_TABLE or ERROR_DISK_FULL)
floppy_extend_file:
push ecx
; find the last cluster of file
movzx eax, word [edi+26] ; first cluster
mov ecx, [edi+28]
jecxz .zero_size
@@:
sub ecx, 0x200
jbe @f
mov eax, [eax*2+0x282000]
and eax, 0xFFF
jz .fat_err
cmp eax, 0xFF8
jb @b
.fat_err:
pop ecx
push ERROR_FAT_TABLE
pop eax
stc
ret
@@:
push eax
mov eax, [eax*2+0x282000]
and eax, 0xFFF
cmp eax, 0xFF8
pop eax
jb .fat_err
; set length to full number of sectors
sub [edi+28], ecx
.start_extend:
pop ecx
; now do extend
push edx esi
mov esi, 0x282000+2*2 ; start scan from cluster 2
mov edx, 2847 ; number of clusters to scan
.extend_loop:
cmp [edi+28], ecx
jae .extend_done
; add new sector
push ecx
push edi
.scan:
mov ecx, edx
mov edi, esi
jecxz .disk_full
push eax
xor eax, eax
repnz scasw
pop eax
jnz .disk_full
mov word [edi-2], 0xFFF
mov esi, edi
mov edx, ecx
sub edi, 0x282000
shr edi, 1
dec edi ; now edi=new cluster
test eax, eax
jz .first_cluster
mov [0x282000+eax*2], di
jmp @f
.first_cluster:
pop eax ; eax->direntry
push eax
mov [eax+26], di
@@:
mov eax, edi ; eax=new cluster
pop edi ; edi->direntry
pop ecx ; ecx=required size
add dword [edi+28], 0x200
jmp .extend_loop
.extend_done:
mov [edi+28], ecx
pop esi edx
xor eax, eax ; CF=0
ret
.disk_full:
pop edi ecx
pop esi edx
stc
push ERROR_DISK_FULL
pop eax
ret
;----------------------------------------------------------------
;
; fs_FloppySetFileEnd - set end of file on floppy
;
; esi points to filename
; ebx points to 64-bit number = new file size
; ecx ignored (reserved)
; edx ignored (reserved)
;
; ret eax = 0 ok or other = errormsg
;
;--------------------------------------------------------------
fs_FloppySetFileEnd:
call read_flp_fat
cmp [FDC_Status], 0
jnz ret11
cmp byte [esi], 0
jnz @f
.access_denied:
push ERROR_ACCESS_DENIED
jmp .ret
@@:
push edi
call fd_find_lfn
jnc @f
pop edi
push ERROR_FILE_NOT_FOUND
.ret:
pop eax
jmp .doret
@@:
; must not be directory
test byte [edi+11], 10h
jz @f
pop edi
jmp .access_denied
@@:
; file size must not exceed 4 Gb
cmp dword [ebx+4], 0
jz @f
pop edi
push ERROR_END_OF_FILE
jmp .ret
@@:
push eax
; set file modification date/time to current
call fat_update_datetime
mov eax, [ebx]
cmp eax, [edi+28]
jb .truncate
ja .expand
pop eax
pushad
call save_chs_sector
popad
pop edi
xor eax, eax
cmp [FDC_Status], 0
jz @f
mov al, 11
@@:
.doret:
mov [fdc_irq_func], fdc_null
ret
.expand:
push ecx
push dword [edi+28] ; save old size
mov ecx, eax
call floppy_extend_file
push eax ; return code
jnc .expand_ok
cmp al, ERROR_DISK_FULL
jz .disk_full
pop eax ecx ecx edi edi
jmp .doret
.device_err:
pop eax
.device_err2:
pop ecx ecx eax edi
push 11
jmp .ret
.disk_full:
.expand_ok:
; save directory & FAT
mov eax, [edi+28]
xchg eax, [esp+12]
movzx edi, word [edi+26]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err
call SetUserInterrupts
; now zero new data
; edi = current cluster, [esp+12]=new size, [esp+4]=old size, [esp]=return code
.zero_loop:
sub dword [esp+4], 0x200
jae .next_cluster
cmp dword [esp+4], -0x200
jz .noread
lea eax, [edi+31]
pusha
call read_chs_sector
popa
cmp [FDC_Status], 0
jnz .err_next
.noread:
mov ecx, [esp+4]
neg ecx
push edi
mov edi, 0xD000+0x200
add edi, [esp+8]
xor eax, eax
mov [esp+8], eax
rep stosb
pop edi
lea eax, [edi+31]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jz .next_cluster
.err_next:
mov byte [esp], 11
.next_cluster:
sub dword [esp+12], 0x200
jbe .expand_done
movzx edi, word [0x282000+edi*2]
jmp .zero_loop
.expand_done:
pop eax ecx ecx edi edi
jmp .doret
.truncate:
mov [edi+28], eax
push ecx
movzx ecx, word [edi+26]
test eax, eax
jz .zero_size
; find new last sector
@@:
sub eax, 0x200
jbe @f
movzx ecx, word [0x282000+ecx*2]
jmp @b
@@:
; we will zero data at the end of last sector - remember it
push ecx
; terminate FAT chain
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
mov word [ecx], 0xFFF
pop ecx
and ecx, 0xFFF
jmp .delete
.zero_size:
and word [edi+26], 0
push 0
.delete:
; delete FAT chain starting with ecx
; mark all clusters as free
cmp ecx, 0xFF8
jae .deleted
lea ecx, [0x282000+ecx+ecx]
push dword [ecx]
and word [ecx], 0
pop ecx
and ecx, 0xFFF
jmp .delete
.deleted:
mov edi, [edi+28]
; save directory & FAT
mov eax, [esp+8]
pusha
call save_chs_sector
popa
cmp [FDC_Status], 0
jnz .device_err2
call save_flp_fat
cmp [FDC_Status], 0
jnz .device_err2
; zero last sector, ignore errors
pop eax
add eax, 31
and edi, 0x1FF
jz .truncate_done
call SetUserInterrupts
pusha
call read_chs_sector
popa
add edi, 0xD000
mov ecx, 0xD000+0x200
sub ecx, edi
push eax
xor eax, eax
rep stosb
pop eax
pusha
call save_chs_sector
popa
.truncate_done:
pop ecx eax edi
xor eax, eax
jmp .doret
fs_FloppyGetFileInfo:
call read_flp_fat
cmp [FDC_Status], 0
jnz ret11
cmp byte [esi], 0
jnz @f
mov eax, 2 ; unsupported
ret
@@:
push edi
call fd_find_lfn
jmp fs_GetFileInfo_finish
ret11:
mov eax, 11
ret
fs_FloppySetFileInfo:
call read_flp_fat
cmp [FDC_Status], 0
jnz ret11
cmp byte [esi], 0
jnz @f
mov eax, 2 ; unsupported
ret
@@:
push edi
call fd_find_lfn
jnc @f
pop edi
mov eax, ERROR_FILE_NOT_FOUND
ret
@@:
push eax
call bdfe_to_fat_entry
pop eax
pusha
call save_chs_sector
popa
pop edi
xor eax, eax
cmp [FDC_Status], 0
jz @f
mov al, 11
@@:
ret
;----------------------------------------------------------------
;
; fs_FloppyExecute - LFN variant for executing from floppy
;
; esi points to floppy filename (e.g. 'dir1/name')
; ebp points to full filename (e.g. '/fd/1/dir1/name')
; dword [ebx] = flags
; dword [ebx+4] = cmdline
;
; ret ebx,edx destroyed
; eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
fs_FloppyExecute:
mov edx, [ebx]
mov ebx, [ebx+4]
test ebx, ebx
jz @f
add ebx, std_application_base_address
@@:
;----------------------------------------------------------------
;
; fs_FloppyExecute.flags - second entry
;
; esi points to floppy filename (kernel address)
; ebp points to full filename
; edx flags
; ebx cmdline (kernel address)
;
; ret eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
.flags:
call read_flp_fat
cmp byte [esi], 0
jnz @f
; cannot execute root!
mov eax, -ERROR_ACCESS_DENIED
ret
@@:
push edi
call fd_find_lfn
jnc .found
pop edi
mov eax, -ERROR_FILE_NOT_FOUND
ret
.found:
movzx eax, word [edi+26] ; cluster
push eax
push dword [edi+28] ; size
push .DoRead
call fs_execute
add esp, 12
pop edi
ret
.DoRead:
; read next block
; in: eax->parameters, edi->buffer
; out: eax = error code
pushad
cmp dword [eax], 0 ; file size
jz .eof
mov eax, [eax+4] ; cluster
add eax, 31
call read_chs_sector
cmp [FDC_Status], 0
jnz .err
pop edi
mov esi, 0xD000
push edi
mov ecx, 512/4
rep movsd
mov eax, [esp+28]
mov ecx, [eax]
sub ecx, 512
jae @f
add edi, ecx
neg ecx
push eax
xor eax, eax
rep stosb
pop eax
@@:
mov [eax], ecx
mov edx, [eax+4]
mov dx, [edx*2+0x282000]
mov [eax+4], dx ; high word is already zero
popad
xor eax, eax
ret
.eof:
popad
mov eax, 6
ret
.err:
popad
mov eax, 11
ret
; \end{diamond}

/kernel/tags/kolibri0.6.0.0/fs/fs_lfn.inc
0,0 → 1,661
; System function 70 - files with long names (LFN)
; diamond, 2006
iglobal
; in this table names must be in lowercase
rootdirs:
db 2,'rd'
dd fs_OnRamdisk
dd fs_NextRamdisk
db 7,'ramdisk'
dd fs_OnRamdisk
dd fs_NextRamdisk
db 2,'fd'
dd fs_OnFloppy
dd fs_NextFloppy
db 10,'floppydisk'
dd fs_OnFloppy
dd fs_NextFloppy
db 3,'hd0'
dd fs_OnHd0
dd fs_NextHd0
db 3,'hd1'
dd fs_OnHd1
dd fs_NextHd1
db 3,'hd2'
dd fs_OnHd2
dd fs_NextHd2
db 3,'hd3'
dd fs_OnHd3
dd fs_NextHd3
;**********************************************
db 3,'cd0'
dd fs_OnCd0
dd fs_NextCd
db 3,'cd1'
dd fs_OnCd1
dd fs_NextCd
db 3,'cd2'
dd fs_OnCd2
dd fs_NextCd
db 3,'cd3'
dd fs_OnCd3
dd fs_NextCd
;***********************************************
db 0
virtual_root_query:
dd fs_HasRamdisk
db 'rd',0
dd fs_HasFloppy
db 'fd',0
dd fs_HasHd0
db 'hd0',0
dd fs_HasHd1
db 'hd1',0
dd fs_HasHd2
db 'hd2',0
dd fs_HasHd3
db 'hd3',0
;**********************************************
dd fs_HasCd0
db 'cd0',0
dd fs_HasCd1
db 'cd1',0
dd fs_HasCd2
db 'cd2',0
dd fs_HasCd3
db 'cd3',0
;**********************************************
dd 0
endg
file_system_lfn:
; in: eax->fileinfo block
; operation codes:
; 0 : read file
; 1 : read folder
; 2 : create/rewrite file
; 3 : write/append to file
; 4 : set end of file
; 5 : get file/directory attributes structure
; 6 : set file/directory attributes structure
; 7 : start application
; 8 : delete file - not implemented yet
; 9 : create directory - not implemented yet
; 10: rename file/directory - not implemented yet
add eax, std_application_base_address
; parse file name
xchg ebx, eax
lea esi, [ebx+20]
mov ebp, esi ; for 'start app' function full path must be known
lodsb
test al, al
jnz @f
mov esi, [esi]
add esi, std_application_base_address
mov ebp, esi
lodsb
@@:
cmp al, '/'
jz @f
.notfound:
mov dword [esp+36], 5 ; file not found
ret
@@:
cmp byte [esi], 0
jz .rootdir
mov edi, rootdirs-8
xor ecx, ecx
push esi
.scan1:
pop esi
add edi, ecx
scasd
scasd
mov cl, byte [edi]
jecxz .notfound
inc edi
push esi
@@:
lodsb
or al, 20h
scasb
loopz @b
jnz .scan1
lodsb
cmp al, '/'
jz .found1
test al, al
jnz .scan1
pop eax
; directory /xxx
.maindir:
cmp dword [ebx], 1
jnz .access_denied
xor eax, eax
mov ebp, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
push dword [ebx+4] ; first block
mov ebx, [ebx+8] ; flags
mov esi, [edi+4]
; ebx=flags, [esp]=first block, ebp=number of blocks, edx=return area, esi='Next' handler
mov edi, edx
mov ecx, 32/4
rep stosd
mov byte [edx], 1 ; version
.maindir_loop:
call esi
jc .maindir_done
inc dword [edx+8]
dec dword [esp]
jns .maindir_loop
dec ebp
js .maindir_loop
inc dword [edx+4]
mov dword [edi], 0x10 ; attributes: folder
mov dword [edi+4], 1 ; name type: UNICODE
push eax
xor eax, eax
add edi, 8
mov ecx, 40/4-2
rep stosd
pop eax
push eax edx
; convert number in eax to decimal UNICODE string
push edi
push -'0'
mov cl, 10
@@:
xor edx, edx
div ecx
push edx
test eax, eax
jnz @b
@@:
pop eax
add al, '0'
stosb
test bl, 1 ; UNICODE name?
jz .ansi2
mov byte [edi], 0
inc edi
.ansi2:
test al, al
jnz @b
mov byte [edi-1], 0
pop edi
; UNICODE name length is 520 bytes, ANSI - 264
add edi, 520
test bl, 1
jnz @f
sub edi, 520-264
@@:
pop edx eax
jmp .maindir_loop
.maindir_done:
pop eax
mov ebx, [edx+4]
xor eax, eax
dec ebp
js @f
mov al, ERROR_END_OF_FILE
@@:
mov [esp+36], eax
mov [esp+24], ebx
ret
; directory /
.rootdir:
cmp dword [ebx], 1 ; read folder?
jz .readroot
.access_denied:
mov dword [esp+36], 10 ; access denied
ret
.readroot:
; virtual root folder - special handler
mov esi, virtual_root_query
mov ebp, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
push dword [ebx+4] ; first block
mov ebx, [ebx+8] ; flags
xor eax, eax
; eax=0, [esp]=first block, ebx=flags, ebp=number of blocks, edx=return area
mov edi, edx
mov ecx, 32/4
rep stosd
mov byte [edx], 1 ; version
.readroot_loop:
cmp dword [esi], eax
jz .readroot_done
call dword [esi]
add esi, 4
test eax, eax
jnz @f
.readroot_next:
or ecx, -1
xchg esi, edi
repnz scasb
xchg esi, edi
jmp .readroot_loop
@@:
xor eax, eax
inc dword [edx+8]
dec dword [esp]
jns .readroot_next
dec ebp
js .readroot_next
inc dword [edx+4]
mov dword [edi], 0x10 ; attributes: folder
mov dword [edi+4], 1 ; name type: UNICODE
add edi, 8
mov ecx, 40/4-2
rep stosd
push edi
@@:
lodsb
stosb
test bl, 1
jz .ansi
mov byte [edi], 0
inc edi
.ansi:
test eax, eax
jnz @b
pop edi
add edi, 520
test bl, 1
jnz .readroot_loop
sub edi, 520-264
jmp .readroot_loop
.readroot_done:
pop eax
mov ebx, [edx+4]
xor eax, eax
dec ebp
js @f
mov al, ERROR_END_OF_FILE
@@:
mov [esp+36], eax
mov [esp+24], ebx
ret
.found1:
pop eax
cmp byte [esi], 0
jz .maindir
; read partition number
xor ecx, ecx
xor eax, eax
@@:
lodsb
cmp al, '/'
jz .done1
test al, al
jz .done1
sub al, '0'
cmp al, 9
ja .notfound
imul ecx, 10
add ecx, eax
jmp @b
.done1:
test ecx, ecx
jz .notfound
test al, al
jnz @f
dec esi
@@:
; now [edi] contains handler address, ecx - partition number,
; esi points to ASCIIZ string - rest of name
jmp dword [edi]
; handlers for devices
; in: ecx = 0 => query virtual directory /xxx
; in: ecx = partition number
; esi -> relative (for device) name
; ebx -> fileinfo
; out: [esp+36]=image of eax, [esp+24]=image of ebx
fs_OnRamdisk:
cmp ecx, 1
jnz file_system_lfn.notfound
mov eax, [ebx]
cmp eax, fs_NumRamdiskServices
jae .not_impl
mov ecx, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
add ebx, 4
call dword [fs_RamdiskServices + eax*4]
mov [esp+36], eax
mov [esp+24], ebx
ret
.not_impl:
mov dword [esp+36], 2 ; not implemented
ret
fs_NotImplemented:
mov eax, 2
ret
fs_RamdiskServices:
dd fs_RamdiskRead
dd fs_RamdiskReadFolder
dd fs_RamdiskRewrite
dd fs_RamdiskWrite
dd fs_RamdiskSetFileEnd
dd fs_RamdiskGetFileInfo
dd fs_RamdiskSetFileInfo
dd fs_RamdiskExecute
fs_NumRamdiskServices = ($ - fs_RamdiskServices)/4
fs_OnFloppy:
cmp ecx, 2
ja file_system_lfn.notfound
mov eax, [ebx]
cmp eax, fs_NumFloppyServices
jae fs_OnRamdisk.not_impl
call reserve_flp
mov [flp_number], cl
mov ecx, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
add ebx, 4
call dword [fs_FloppyServices + eax*4]
and [flp_status], 0
mov [esp+36], eax
mov [esp+24], ebx
ret
fs_FloppyServices:
dd fs_FloppyRead
dd fs_FloppyReadFolder
dd fs_FloppyRewrite
dd fs_FloppyWrite
dd fs_FloppySetFileEnd
dd fs_FloppyGetFileInfo
dd fs_FloppySetFileInfo
dd fs_FloppyExecute
fs_NumFloppyServices = ($ - fs_FloppyServices)/4
fs_OnHd0:
call reserve_hd1
mov [hdbase], 0x1F0
mov [hdid], 0
push 1
jmp fs_OnHd
fs_OnHd1:
call reserve_hd1
mov [hdbase], 0x1F0
mov [hdid], 0x10
push 2
jmp fs_OnHd
fs_OnHd2:
call reserve_hd1
mov [hdbase], 0x170
mov [hdid], 0
push 3
jmp fs_OnHd
fs_OnHd3:
call reserve_hd1
mov [hdbase], 0x170
mov [hdid], 0x10
push 4
fs_OnHd:
call reserve_hd_channel
pop eax
mov [hdpos], eax
cmp ecx, 0x100
jae .nf
cmp cl, [0x40001+eax]
jbe @f
.nf:
call free_hd_channel
and [hd1_status], 0
mov dword [esp+36], 5 ; not found
ret
@@:
mov [fat32part], ecx
push ebx esi
call choice_necessity_partition_1
pop esi ebx
mov ecx, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
mov eax, [ebx]
cmp eax, fs_NumHdServices
jae .not_impl
add ebx, 4
call dword [fs_HdServices + eax*4]
call free_hd_channel
and [hd1_status], 0
mov [esp+36], eax
mov [esp+24], ebx
ret
.not_impl:
call free_hd_channel
and [hd1_status], 0
mov dword [esp+36], 2 ; not implemented
ret
fs_HdServices:
dd fs_HdRead
dd fs_HdReadFolder
dd fs_HdRewrite
dd fs_HdWrite
dd fs_HdSetFileEnd
dd fs_HdGetFileInfo
dd fs_HdSetFileInfo
dd fs_HdExecute
fs_NumHdServices = ($ - fs_HdServices)/4
;*******************************************************
fs_OnCd0:
call reserve_cd
mov [ChannelNumber],1
mov [DiskNumber],0
push 6
jmp fs_OnCd
fs_OnCd1:
call reserve_cd
mov [ChannelNumber],1
mov [DiskNumber],1
push 4
jmp fs_OnCd
fs_OnCd2:
call reserve_cd
mov [ChannelNumber],2
mov [DiskNumber],0
push 2
jmp fs_OnCd
fs_OnCd3:
call reserve_cd
mov [ChannelNumber],2
mov [DiskNumber],1
push 0
fs_OnCd:
call reserve_cd_channel
pop eax
mov [hdpos], eax
cmp ecx, 0x100
jae .nf
push ecx ebx
mov cl,al
mov bl,[0x40001]
shr bl,cl
test bl,2
pop ebx ecx
jnz @f
.nf:
call free_cd_channel
and [cd_status], 0
mov dword [esp+36], 5 ; not found
ret
@@:
mov ecx, [ebx+12]
mov edx, [ebx+16]
add edx, std_application_base_address
mov eax, [ebx]
cmp eax,fs_NumCdServices
jae .not_impl
add ebx, 4
call dword [fs_CdServices + eax*4]
call free_cd_channel
and [cd_status], 0
mov [esp+36], eax
mov [esp+24], ebx
ret
.not_impl:
call free_cd_channel
and [cd_status], 0
mov dword [esp+36], 2 ; not implemented
ret
fs_CdServices:
dd fs_CdRead
dd fs_CdReadFolder
dd fs_NotImplemented
dd fs_NotImplemented
dd fs_NotImplemented
dd fs_CdGetFileInfo
dd fs_NotImplemented
dd fs_CdExecute
fs_NumCdServices = ($ - fs_CdServices)/4
;*******************************************************
fs_HasRamdisk:
mov al, 1 ; we always have ramdisk
ret
fs_HasFloppy:
cmp byte [0x40000], 0
setnz al
ret
fs_HasHd0:
mov al, [0x40001]
and al, 11000000b
cmp al, 01000000b
setz al
ret
fs_HasHd1:
mov al, [0x40001]
and al, 00110000b
cmp al, 00010000b
setz al
ret
fs_HasHd2:
mov al, [0x40001]
and al, 00001100b
cmp al, 00000100b
setz al
ret
fs_HasHd3:
mov al, [0x40001]
and al, 00000011b
cmp al, 00000001b
setz al
ret
;*******************************************************
fs_HasCd0:
mov al, [0x40001]
and al, 11000000b
cmp al, 10000000b
setz al
ret
fs_HasCd1:
mov al, [0x40001]
and al, 00110000b
cmp al, 00100000b
setz al
ret
fs_HasCd2:
mov al, [0x40001]
and al, 00001100b
cmp al, 00001000b
setz al
ret
fs_HasCd3:
mov al, [0x40001]
and al, 00000011b
cmp al, 00000010b
setz al
ret
;*******************************************************
; fs_NextXXX functions:
; in: eax = partition number, from which start to scan
; out: CF=1 => no more partitions
; CF=0 => eax=next partition number
fs_NextRamdisk:
; we always have /rd/1
test eax, eax
stc
jnz @f
mov al, 1
clc
@@:
ret
fs_NextFloppy:
; we have /fd/1 iff (([0x40000] and 0xF0) != 0) and /fd/2 iff (([0x40000] and 0x0F) != 0)
test byte [0x40000], 0xF0
jz .no1
test eax, eax
jnz .no1
inc eax
ret ; CF cleared
.no1:
test byte [0x40000], 0x0F
jz .no2
cmp al, 2
jae .no2
mov al, 2
clc
ret
.no2:
stc
ret
; on hdx, we have partitions from 1 to [0x40002+x]
fs_NextHd0:
push 0
jmp fs_NextHd
fs_NextHd1:
push 1
jmp fs_NextHd
fs_NextHd2:
push 2
jmp fs_NextHd
fs_NextHd3:
push 3
fs_NextHd:
pop ecx
movzx ecx, byte [0x40002+ecx]
cmp eax, ecx
jae fs_NextFloppy.no2
inc eax
clc
ret
;*******************************************************
fs_NextCd:
; we always have /cdX/1
test eax, eax
stc
jnz @f
mov al, 1
clc
@@:
ret
;*******************************************************

/kernel/tags/kolibri0.6.0.0/fs/iso9660.inc
0,0 → 1,826
uglobal
cd_current_pointer_of_input dd 0
cd_current_pointer_of_input_2 dd 0
cd_mem_location dd 0
cd_counter_block dd 0
IDE_Channel_1 db 0
IDE_Channel_2 db 0
endg
CDDataBuf equ 0x7000
reserve_cd:
cli
cmp [cd_status],0
je reserve_ok2
sti
call change_task
jmp reserve_cd
reserve_ok2:
push eax
mov eax,[0x3000]
shl eax,5
mov eax,[eax+0x3000+TASKDATA.pid]
mov [cd_status],eax
pop eax
sti
ret
reserve_cd_channel:
cmp [ChannelNumber],1
jne .IDE_Channel_2
.IDE_Channel_1:
cli
cmp [IDE_Channel_1],0
je .reserve_ok_1
sti
call change_task
jmp .IDE_Channel_1
.IDE_Channel_2:
cli
cmp [IDE_Channel_2],0
je .reserve_ok_2
sti
call change_task
jmp .IDE_Channel_1
.reserve_ok_1:
mov [IDE_Channel_1],1
ret
.reserve_ok_2:
mov [IDE_Channel_2],1
ret
free_cd_channel:
cmp [ChannelNumber],1
jne .IDE_Channel_2
.IDE_Channel_1:
mov [IDE_Channel_1],0
ret
.IDE_Channel_2:
mov [IDE_Channel_2],0
ret
cd_status dd 0
;----------------------------------------------------------------
;
; fs_CdRead - LFN variant for reading CD disk
;
; esi points to filename /dir1/dir2/.../dirn/file,0
; ebx pointer to 64-bit number = first wanted byte, 0+
; may be ebx=0 - start from first byte
; ecx number of bytes to read, 0+
; edx mem location to return data
;
; ret ebx = bytes read or 0xffffffff file not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_CdRead:
push edi
cmp byte [esi], 0
jnz @f
.noaccess:
pop edi
.noaccess_2:
or ebx, -1
mov eax, ERROR_ACCESS_DENIED
ret
.noaccess_3:
pop eax edx ecx edi
jmp .noaccess_2
@@:
call cd_find_lfn
jnc .found
pop edi
cmp [DevErrorCode],0
jne .noaccess_2
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.found:
mov edi,[cd_current_pointer_of_input]
test byte [edi+25],10b ; do not allow read directories
jnz .noaccess
test ebx, ebx
jz .l1
cmp dword [ebx+4], 0
jz @f
xor ebx, ebx
.reteof:
mov eax, 6 ; end of file
pop edi
ret
@@:
mov ebx, [ebx]
.l1:
push ecx edx
push 0
mov eax, [edi+10] ; ðåàëüíûé ðàçìåð ôàéëîâîé ñåêöèè
sub eax, ebx
jb .eof
cmp eax, ecx
jae @f
mov ecx, eax
mov byte [esp], 6
@@:
mov eax,[edi+2]
mov [CDSectorAddress],eax
; now eax=cluster, ebx=position, ecx=count, edx=buffer for data
.new_sector:
test ecx, ecx
jz .done
sub ebx, 2048
jae .new_sector
add ebx, 2048
jnz .incomplete_sector
cmp ecx, 2048
jb .incomplete_sector
; we may read and memmove complete sector
mov [CDDataBuf_pointer],edx
call ReadCDWRetr ; ÷èòàåì ñåêòîð ôàéëà
cmp [DevErrorCode],0
jne .noaccess_3
inc dword [CDSectorAddress]
add edx, 2048
sub ecx, 2048
jmp .new_sector
.incomplete_sector:
; we must read and memmove incomplete sector
mov [CDDataBuf_pointer],CDDataBuf
call ReadCDWRetr ; ÷èòàåì ñåêòîð ôàéëà
cmp [DevErrorCode],0
jne .noaccess_3
inc dword [CDSectorAddress]
mov eax,CDDataBuf
add eax, ebx
push ecx
add ecx, ebx
cmp ecx, 2048
jbe @f
mov ecx, 2048
@@:
sub ecx, ebx
push edi esi ecx
mov edi,edx
mov esi,eax ;0x7000 ; CD data buffer
cld
rep movsb
pop ecx esi edi
add edx, ecx
sub [esp], ecx
pop ecx
xor ebx, ebx
jmp .new_sector
.done:
mov ebx, edx
pop eax edx ecx edi
sub ebx, edx
ret
.eof:
mov ebx, edx
pop eax edx ecx
sub ebx, edx
jmp .reteof
;----------------------------------------------------------------
;
; fs_CdReadFolder - LFN variant for reading CD disk folder
;
; esi points to filename /dir1/dir2/.../dirn/file,0
; ebx pointer to structure 32-bit number = first wanted block, 0+
; & flags (bitfields)
; flags: bit 0: 0=ANSI names, 1=UNICODE names
; ecx number of blocks to read, 0+
; edx mem location to return data
;
; ret ebx = blocks read or 0xffffffff folder not found
; eax = 0 ok read or other = errormsg
;
;--------------------------------------------------------------
fs_CdReadFolder:
push edi
call cd_find_lfn
jnc .found
pop edi
cmp [DevErrorCode],0
jne .noaccess_1
or ebx, -1
mov eax, ERROR_FILE_NOT_FOUND
ret
.found:
mov edi,[cd_current_pointer_of_input]
test byte [edi+25],10b ; do not allow read directories
jnz .found_dir
pop edi
.noaccess_1:
or ebx, -1
mov eax, ERROR_ACCESS_DENIED
ret
.found_dir:
mov eax,[edi+2] ; eax=cluster
mov [CDSectorAddress],eax
mov eax,[edi+10] ; ðàçìåð äèðåêòðîðèè
.doit:
; init header
push eax ecx
mov edi, edx
mov ecx, 32/4
xor eax, eax
rep stosd
pop ecx eax
mov byte [edx], 1 ; version
mov [cd_mem_location],edx
add [cd_mem_location],32
; íà÷èíàåì ïåðåáðîñêó ÁÄÂÊ â ÓÑÂÊ
;.mainloop:
mov [cd_counter_block],dword 0
dec dword [CDSectorAddress]
push ecx
.read_to_buffer:
inc dword [CDSectorAddress]
mov [CDDataBuf_pointer],CDDataBuf
call ReadCDWRetr ; ÷èòàåì ñåêòîð äèðåêòîðèè
cmp [DevErrorCode],0
jne .noaccess_1
call .get_names_from_buffer
sub eax,2048
; äèðåêòîðèÿ çàêîí÷èëàñü?
cmp eax,0
ja .read_to_buffer
mov edi,[cd_counter_block]
mov [edx+8],edi
mov edi,[ebx]
sub [edx+4],edi
pop ecx edi
mov ebx, [edx+4]
mov eax,ERROR_SUCCESS
ret
.get_names_from_buffer:
mov [cd_current_pointer_of_input_2],CDDataBuf
push eax esi edi edx
.get_names_from_buffer_1:
call cd_get_name
jc .end_buffer
inc dword [cd_counter_block]
mov eax,[cd_counter_block]
cmp [ebx],eax
jae .get_names_from_buffer_1
test ecx, ecx
jz .get_names_from_buffer_1
mov edi,[cd_counter_block]
mov [edx+4],edi
dec ecx
mov esi,ebp
mov edi,[cd_mem_location]
add edi,40
test dword [ebx+4], 1 ; 0=ANSI, 1=UNICODE
jnz .unicode
; jmp .unicode
.ansi:
cmp [cd_counter_block],2
jbe .ansi_parent_directory
cld
lodsw
xchg ah,al
call uni2ansi_char
cld
stosb
; ïðîâåðêà êîíöà ôàéëà
mov ax,[esi]
cmp ax,word 3B00h ; ñåïàðàòîð êîíöà ôàéëà ';'
je .cd_get_parameters_of_file_1
; ïðîâåðêà äëÿ ôàéëîâ íå çàêàí÷èâàþùèõñÿ ñåïàðàòîðîì
movzx eax,byte [ebp-33]
add eax,ebp
sub eax,34
cmp esi,eax
je .cd_get_parameters_of_file_1
; ïðîâåðêà êîíöà ïàïêè
movzx eax,byte [ebp-1]
add eax,ebp
cmp esi,eax
jb .ansi
.cd_get_parameters_of_file_1:
mov [edi],byte 0
call cd_get_parameters_of_file
add [cd_mem_location],304
jmp .get_names_from_buffer_1
.ansi_parent_directory:
cmp [cd_counter_block],2
je @f
mov [edi],byte '.'
inc edi
jmp .cd_get_parameters_of_file_1
@@:
mov [edi],word '..'
add edi,2
jmp .cd_get_parameters_of_file_1
.unicode:
cmp [cd_counter_block],2
jbe .unicode_parent_directory
cld
movsw
; ïðîâåðêà êîíöà ôàéëà
mov ax,[esi]
cmp ax,word 3B00h ; ñåïàðàòîð êîíöà ôàéëà ';'
je .cd_get_parameters_of_file_2
; ïðîâåðêà äëÿ ôàéëîâ íå çàêàí÷èâàþùèõñÿ ñåïàðàòîðîì
movzx eax,byte [ebp-33]
add eax,ebp
sub eax,34
cmp esi,eax
je .cd_get_parameters_of_file_2
; ïðîâåðêà êîíöà ïàïêè
movzx eax,byte [ebp-1]
add eax,ebp
cmp esi,eax
jb .unicode
.cd_get_parameters_of_file_2:
mov [edi],word 0
call cd_get_parameters_of_file
add [cd_mem_location],560
jmp .get_names_from_buffer_1
.unicode_parent_directory:
cmp [cd_counter_block],2
je @f
mov [edi],word 2E00h ; '.'
add edi,2
jmp .cd_get_parameters_of_file_2
@@:
mov [edi],dword 2E002E00h ; '..'
add edi,4
jmp .cd_get_parameters_of_file_2
.end_buffer:
pop edx edi esi eax
ret
cd_get_parameters_of_file:
mov edi,[cd_mem_location]
cd_get_parameters_of_file_1:
; ïîëó÷àåì àòðèáóòû ôàéëà
xor eax,eax
; ôàéë íå àðõèâèðîâàëñÿ
inc al
shl eax,1
; ýòî êàòàëîã?
test [ebp-8],byte 2
jz .file
inc al
.file:
; ìåòêà òîìà íå êàê â FAT, â ýòîì âèäå îòñóòñâóåò
; ôàéë íå ÿâëÿåòñÿ ñèñòåìíûì
shl eax,3
; ôàéë ÿâëÿåòñÿ ñêðûòûì? (àòðèáóò ñóùåñòâîâàíèå)
test [ebp-8],byte 1
jz .hidden
inc al
.hidden:
shl eax,1
; ôàéë âñåãäà òîëüêî äëÿ ÷òåíèÿ, òàê êàê ýòî CD
inc al
mov [edi],eax
; ïîëó÷àåì âðåìÿ äëÿ ôàéëà
;÷àñ
movzx eax,byte [ebp-12]
shl eax,8
;ìèíóòà
mov al,[ebp-11]
shl eax,8
;ñåêóíäà
mov al,[ebp-10]
;âðåìÿ ñîçäàíèÿ ôàéëà
mov [edi+8],eax
;âðåìÿ ïîñëåäíåãî äîñòóïà
mov [edi+16],eax
;âðåìÿ ïîñëåäíåé çàïèñè
mov [edi+24],eax
; ïîëó÷àåì äàòó äëÿ ôàéëà
;ãîä
movzx eax,byte [ebp-15]
add eax,1900
shl eax,8
;ìåñÿö
mov al,[ebp-14]
shl eax,8
;äåíü
mov al,[ebp-13]
;äàòà ñîçäàíèÿ ôàéëà
mov [edi+12],eax
;âðåìÿ ïîñëåäíåãî äîñòóïà
mov [edi+20],eax
;âðåìÿ ïîñëåäíåé çàïèñè
mov [edi+28],eax
; ïîëó÷àåì òèï äàííûõ èìåíè
xor eax,eax
test dword [ebx+4], 1 ; 0=ANSI, 1=UNICODE
jnz .unicode_1
mov [edi+4],eax
jmp @f
.unicode_1:
inc eax
mov [edi+4],eax
@@:
; ïîëó÷àåì ðàçìåð ôàéëà â áàéòàõ
xor eax,eax
mov [edi+32+4],eax
mov eax,[ebp-23]
mov [edi+32],eax
ret
;----------------------------------------------------------------
;
; fs_CdGetFileInfo - LFN variant for CD
; get file/directory attributes structure
;
;----------------------------------------------------------------
fs_CdGetFileInfo:
cmp byte [esi], 0
jnz @f
mov eax, 2
ret
@@:
push edi ebp
call cd_find_lfn
pushfd
cmp [DevErrorCode], 0
jz @f
popfd
pop ebp edi
mov eax, 11
ret
@@:
popfd
jnc @f
pop ebp edi
mov eax, ERROR_FILE_NOT_FOUND
ret
@@:
mov edi, edx
call cd_get_parameters_of_file_1
and dword [edi+4], 0
pop ebp
pop ebp edi
xor eax, eax
ret
;----------------------------------------------------------------
;
; fs_CdExecute - LFN variant for executing from CD
;
; esi points to hd filename (e.g. 'dir1/name')
; ebp points to full filename (e.g. '/hd0/1/dir1/name')
; dword [ebx] = flags
; dword [ebx+4] = cmdline
;
; ret ebx,edx destroyed
; eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
fs_CdExecute:
mov edx, [ebx]
mov ebx, [ebx+4]
test ebx, ebx
jz @f
add ebx, std_application_base_address
@@:
;----------------------------------------------------------------
;
; fs_CdExecute.flags - second entry
;
; esi points to floppy filename (kernel address)
; ebp points to full filename
; edx flags
; ebx cmdline (kernel address)
;
; ret eax > 0 - PID, < 0 - error
;
;--------------------------------------------------------------
.flags:
cmp byte [esi], 0
jnz @f
; cannot execute root!
mov eax, -ERROR_ACCESS_DENIED
ret
@@:
push edi
call cd_find_lfn
jnc .found
pop edi
mov eax, -ERROR_FILE_NOT_FOUND
cmp [DevErrorCode], 0
jz @f
mov al, -11
@@:
ret
.found:
mov edi,[cd_current_pointer_of_input]
mov eax,[edi+2]
push 0
push eax
push dword [edi+10] ; size
push .DoRead
call fs_execute
add esp, 16
pop edi
ret
.DoRead:
; read next block
; in: eax->parameters, edi->buffer
; out: eax = error code
pushad
cmp dword [eax], 0 ; file size
jz .eof
cmp [eax+8],dword 0
jne @f
mov ecx,[eax+4]
inc dword [eax+4]
mov [CDSectorAddress],ecx
mov [CDDataBuf_pointer],CDDataBuf ;edi
call ReadCDWRetr
cmp [DevErrorCode], 0
jnz .err
@@:
push esi edi ecx
mov esi,512
imul esi,[eax+8]
add esi,CDDataBuf
mov ecx,512/4
cld
rep movsd
pop ecx edi esi
mov eax, [esp+28]
mov ecx, [eax]
sub ecx, 512
jae @f
lea edi, [edi+ecx+512]
neg ecx
push eax
xor eax, eax
rep stosb
pop eax
@@:
mov [eax], ecx
mov edx, [eax+8]
inc edx
cmp edx, 4 ; 2048/512=4
jb @f
xor edx, edx
@@:
mov [eax+8], edx
popad
xor eax, eax
ret
.eof:
popad
mov eax, 6
ret
.err:
popad
mov eax, 11
ret
cd_find_lfn:
; in: esi->name
; out: CF=1 - file not found
; else CF=0 and [cd_current_pointer_of_input] direntry
push eax esi
; 16 ñåêòîð íà÷àëî íàáîðà äåñêðèïòîðîâ òîìîâ
mov [CDSectorAddress],dword 15
.start:
inc dword [CDSectorAddress]
mov [CDDataBuf_pointer],CDDataBuf
call ReadCDWRetr
cmp [DevErrorCode],0
jne .access_denied
; ïðîâåðêà íà âøèâîñòü
cmp [CDDataBuf+1],dword 'CD00'
jne .access_denied
cmp [CDDataBuf+5],byte '1'
jne .access_denied
; ñåêòîð ÿâëÿåòñÿ òåðìèíàòîðîì íàáîð äåñêðèïòîðîâ òîìîâ?
cmp [CDDataBuf],byte 0xff
je .access_denied
; ñåêòîð ÿâëÿåòñÿ äîïîëíèòåëüíûì è óëó÷øåííûì äåñêðèïòîðîì òîìà?
cmp [CDDataBuf],byte 0x2
jne .start
; ñåêòîð ÿâëÿåòñÿ äîïîëíèòåëüíûì äåñêðèïòîðîì òîìà?
cmp [CDDataBuf+6],byte 0x1
jne .start
; ïàðàìåòðû root äèðåêòðîðèè
mov eax,[CDDataBuf+0x9c+2] ; íà÷àëî root äèðåêòðîðèè
mov [CDSectorAddress],eax
mov eax,[CDDataBuf+0x9c+10] ; ðàçìåð root äèðåêòðîðèè
cmp byte [esi], 0
jnz @f
mov [cd_current_pointer_of_input],CDDataBuf+0x9c
jmp .done
@@:
; íà÷èíàåì ïîèñê
.mainloop:
dec dword [CDSectorAddress]
.read_to_buffer:
inc dword [CDSectorAddress]
mov [CDDataBuf_pointer],CDDataBuf
call ReadCDWRetr ; ÷èòàåì ñåêòîð äèðåêòîðèè
cmp [DevErrorCode],0
jne .access_denied
call cd_find_name_in_buffer
jnc .found
sub eax,2048
; äèðåêòîðèÿ çàêîí÷èëàñü?
cmp eax,0
ja .read_to_buffer
; íåò èñêîìîãî ýëåìåíòà öåïî÷êè
.access_denied:
pop esi eax
stc
ret
; èñêîìûé ýëåìåíò öåïî÷êè íàéäåí
.found:
; êîíåö ïóòè ôàéëà
cmp byte [esi-1], 0
jz .done
mov eax,[cd_current_pointer_of_input]
add eax,2
mov eax,[eax]
mov [CDSectorAddress],eax ; íà÷àëî äèðåêòîðèè
add eax,8
mov eax,[eax] ; ðàçìåð äèðåêòîðèè
jmp .mainloop
; óêàçàòåëü ôàéëà íàéäåí
.done:
pop esi eax
clc
ret
cd_find_name_in_buffer:
mov [cd_current_pointer_of_input_2],CDDataBuf
.start:
call cd_get_name
jc .not_found
call cd_compare_name
jc .start
.found:
clc
ret
.not_found:
stc
ret
cd_get_name:
push eax
mov ebp,[cd_current_pointer_of_input_2]
mov [cd_current_pointer_of_input],ebp
mov eax,[ebp]
cmp eax,0 ; âõîäû çàêîí÷èëèñü?
je .next_sector
cmp ebp,CDDataBuf+2048 ; áóôåð çàêîí÷èëñÿ?
jae .next_sector
movzx eax, byte [ebp]
add [cd_current_pointer_of_input_2],eax ; ñëåäóþùèé âõîä êàòàëîãà
add ebp,33 ; óêàçàòåëü óñòàíîâëåí íà íà÷àëî èìåíè
pop eax
clc
ret
.next_sector:
pop eax
stc
ret
cd_compare_name:
; compares ASCIIZ-names, case-insensitive (cp866 encoding)
; in: esi->name, ebp->name
; out: if names match: ZF=1 and esi->next component of name
; else: ZF=0, esi is not changed
; destroys eax
push esi eax edi
mov edi,ebp
.loop:
cld
lodsb
push ax
call char_todown
call ansi2uni_char
xchg ah,al
cld
scasw
pop ax
je .coincides
call char_toupper
call ansi2uni_char
xchg ah,al
cld
sub edi,2
scasw
jne .name_not_coincide
.coincides:
cmp [esi],byte '/' ; ðàçäåëèòåëü ïóòè, êîíåö èìåíè òåêóùåãî ýëåìåíòà
je .done
cmp [esi],byte 0 ; ðàçäåëèòåëü ïóòè, êîíåö èìåíè òåêóùåãî ýëåìåíòà
je .done
jmp .loop
.name_not_coincide:
pop edi eax esi
stc
ret
.done:
; ïðîâåðêà êîíöà ôàéëà
cmp [edi],word 3B00h ; ñåïàðàòîð êîíöà ôàéëà ';'
je .done_1
; ïðîâåðêà äëÿ ôàéëîâ íå çàêàí÷èâàþùèõñÿ ñåïàðàòîðîì
movzx eax,byte [ebp-33]
add eax,ebp
sub eax,34
cmp edi,eax
je .done_1
; ïðîâåðêà êîíöà ïàïêè
movzx eax,byte [ebp-1]
add eax,ebp
cmp edi,eax
jne .name_not_coincide
.done_1:
pop edi eax
add esp,4
inc esi
clc
ret
char_todown:
; convert character to uppercase, using cp866 encoding
; in: al=symbol
; out: al=converted symbol
cmp al, 'A'
jb .ret
cmp al, 'Z'
jbe .az
cmp al, '€'
jb .ret
cmp al, ''
jb .rus1
cmp al, 'Ÿ'
ja .ret
; 0x90-0x9F -> 0xE0-0xEF
add al, 'à'-''
.ret:
ret
.rus1:
; 0x80-0x8F -> 0xA0-0xAF
.az:
add al, 0x20
ret
uni2ansi_char:
; convert UNICODE character in al to ANSI character in ax, using cp866 encoding
; in: ax=UNICODE character
; out: al=converted ANSI character
cmp ax, 0x80
jb .ascii
cmp ax, 0x401
jz .yo1
cmp ax, 0x451
jz .yo2
cmp ax, 0x410
jb .unk
cmp ax, 0x440
jb .rus1
cmp ax, 0x450
jb .rus2
.unk:
mov al, '_'
jmp .doit
.yo1:
mov al, 'ð'
jmp .doit
.yo2:
mov al, 'ñ'
jmp .doit
.rus1:
; 0x410-0x43F -> 0x80-0xAF
add al, 0x70
jmp .doit
.rus2:
; 0x440-0x44F -> 0xE0-0xEF
add al, 0xA0
.ascii:
.doit:
ret

/kernel/tags/kolibri0.6.0.0/fs/part_set.inc
0,0 → 1,351
;*************************************************************
;* 29.04.2006 Elimination of hangup after the *
;* expiration hd_wait_timeout - Mario79 *
;* 28.01.2006 find all Fat16/32 partition in all input point *
;* to MBR - Mario79 *
;*************************************************************
align 4
;******************************************************
; Please do not change this place - variables in text
; Mario79
; START place
;******************************************************
PARTITION_START dd 0x3f
PARTITION_END dd 0
SECTORS_PER_FAT dd 0x1f3a
NUMBER_OF_FATS dd 0x2
SECTORS_PER_CLUSTER dd 0x8
BYTES_PER_SECTOR dd 0x200 ; Note: if BPS <> 512 need lots of changes
ROOT_CLUSTER dd 2 ; first rootdir cluster
FAT_START dd 0 ; start of fat table
ROOT_START dd 0 ; start of rootdir (only fat16)
ROOT_SECTORS dd 0 ; count of rootdir sectors (only fat16)
DATA_START dd 0 ; start of data area (=first cluster 2)
LAST_CLUSTER dd 0 ; last availabe cluster
ADR_FSINFO dd 0 ; used only by fat32
fatRESERVED dd 0x0FFFFFF6
fatBAD dd 0x0FFFFFF7
fatEND dd 0x0FFFFFF8
fatMASK dd 0x0FFFFFFF
fat_type db 0 ; 0=none, 16=fat16, 32=fat32
;***************************************************************************
; End place
; Mario79
;***************************************************************************
iglobal
partition_types: ; list of fat16/32 partitions
db 0x04 ; DOS: fat16 <32M
db 0x06 ; DOS: fat16 >32M
db 0x0b ; WIN95: fat32
db 0x0c ; WIN95: fat32, LBA-mapped
db 0x0e ; WIN95: fat16, LBA-mapped
db 0x14 ; Hidden DOS: fat16 <32M
db 0x16 ; Hidden DOS: fat16 >32M
db 0x1b ; Hidden WIN95: fat32
db 0x1c ; Hidden WIN95: fat32, LBA-mapped
db 0x1e ; Hidden WIN95: fat16, LBA-mapped
db 0xc4 ; DRDOS/secured: fat16 <32M
db 0xc6 ; DRDOS/secured: fat16 >32M
db 0xcb ; DRDOS/secured: fat32
db 0xcc ; DRDOS/secured: fat32, LBA-mapped
db 0xce ; DRDOS/secured: fat16, LBA-mapped
db 0xd4 ; Old Multiuser DOS secured: fat16 <32M
db 0xd6 ; Old Multiuser DOS secured: fat16 >32M
partition_types_end:
extended_types: ; list of extended partitions
db 0x05 ; DOS: extended partition
db 0x0f ; WIN95: extended partition, LBA-mapped
db 0xc5 ; DRDOS/secured: extended partition
db 0xd5 ; Old Multiuser DOS secured: extended partition
extended_types_end:
endg
; Partition chain used:
; MBR ; PARTITION2 ; PARTITION3 ; PARTITION4
;==========================================================
; fat16/32 +-- fat16/32 +-- fat16/32 +-- fat16/32 +--
; extended --+ extended --+ extended --+ extended --+
; 0 0 0 0
; 0 0 0 0
; Notes:
; - extended partition need to be in second entry on table
; - it will skip over removed partitions
set_FAT32_variables:
mov [0xfe10],dword 0 ; entries in hd cache
mov [problem_partition],0
call reserve_hd1
call clear_hd_cache
cmp dword [hdpos],0
je problem_hd
pushad
xor ecx,ecx ; partition count
mov edx,-1 ; flag for partition
xor eax,eax ; read MBR
xor ebp,ebp ; extended partition start
new_partition:
test ebp,ebp ; is there extended partition?
jnz extended_already_set ; yes
xchg ebp,eax ; no. set it now
extended_already_set:
add eax,ebp ; mbr=mbr+0, ext_part=ext_start+relat_start
mov ebx,buffer
call hd_read
cmp [hd_error],0
jne problem_hd
cmp word [ebx+0x1fe],0xaa55 ; is it valid boot sector?
jnz end_partition_chain
cmp dword [ebx+0x1be+0xc],0 ; skip over empty partition
jz next_partition
push eax
mov al,[ebx+0x1be+4] ; get primary partition type
call scan_partition_types
pop eax
jnz next_primary_partition ; no. skip over
inc ecx
cmp ecx,[fat32part] ; is it wanted partition?
jnz next_primary_partition ; no
mov edx,eax ; start sector
add edx,[ebx+0x1be+8] ; add relative start
next_primary_partition:
push eax
mov al,[ebx+0x1be+4+16] ; get primary partition type
call scan_partition_types
pop eax
jnz next_primary_partition_1 ; no. skip over
inc ecx
cmp ecx,[fat32part] ; is it wanted partition?
jnz next_primary_partition_1 ; no
mov edx,eax ; start sector
add edx,[ebx+0x1be+8+16] ; add relative start
next_primary_partition_1:
push eax
mov al,[ebx+0x1be+4+16+16] ; get primary partition type
call scan_partition_types
pop eax
jnz next_primary_partition_2 ; no. skip over
inc ecx
cmp ecx,[fat32part] ; is it wanted partition?
jnz next_primary_partition_2 ; no
mov edx,eax ; start sector
add edx,[ebx+0x1be+8+16+16] ; add relative start
next_primary_partition_2:
push eax
mov al,[ebx+0x1be+4+16+16+16] ; get primary partition type
call scan_partition_types
pop eax
jnz next_partition ; no. skip over
inc ecx
cmp ecx,[fat32part] ; is it wanted partition?
jnz next_partition ; no
mov edx,eax ; start sector
add edx,[ebx+0x1be+8+16+16+16] ; add relative start
next_partition:
push eax
mov al,[ebx+0x1be+4] ; get extended partition type
call scan_extended_types
pop eax
jnz next_partition_1
mov eax,[ebx+0x1be+8] ; add relative start
test eax,eax ; is there extended partition?
jnz new_partition ; yes. read it
next_partition_1:
push eax
mov al,[ebx+0x1be+4+16] ; get extended partition type
call scan_extended_types
pop eax
jnz next_partition_2
mov eax,[ebx+0x1be+8+16] ; add relative start
test eax,eax ; is there extended partition?
jnz new_partition ; yes. read it
next_partition_2:
push eax
mov al,[ebx+0x1be+4+16+16] ; get extended partition type
call scan_extended_types
pop eax
jnz next_partition_3
mov eax,[ebx+0x1be+8+16+16] ; add relative start
test eax,eax ; is there extended partition?
jnz new_partition ; yes. read it
next_partition_3:
push eax
mov al,[ebx+0x1be+4+16+16+16] ; get extended partition type
call scan_extended_types
pop eax
jnz end_partition_chain ; no. end chain
mov eax,[ebx+0x1be+8+16+16+16] ; get start of extended partition
test eax,eax ; is there extended partition?
jnz new_partition ; yes. read it
end_partition_chain:
mov [partition_count],ecx
cmp edx,-1 ; found wanted partition?
jnz hd_and_partition_ok ; yes. install it
jmp problem_partition_or_fat
scan_partition_types:
push ecx
mov edi,partition_types
mov ecx,partition_types_end-partition_types
cld
repne scasb ; is partition type ok?
pop ecx
ret
scan_extended_types:
push ecx
mov edi,extended_types
mov ecx,extended_types_end-extended_types
cld
repne scasb ; is it extended partition?
pop ecx
ret
problem_fat_dec_count: ; bootsector is missing or another problem
dec [partition_count] ; remove it from partition_count
problem_partition_or_fat:
popad
problem_hd:
mov [fat_type],0
mov [hd1_status],0 ; free
mov [problem_partition],1
ret
hd_and_partition_ok:
mov eax,edx
mov [PARTITION_START],eax
mov [hd_setup],1
mov ebx,buffer
call hd_read ; read boot sector of partition
cmp [hd_error],0
jne problem_fat_dec_count
mov [hd_setup],0
cmp word [ebx+0x1fe],0xaa55 ; is it valid boot sector?
jnz problem_fat_dec_count
movzx eax,word [ebx+0xe] ; sectors reserved
add eax,[PARTITION_START]
mov [FAT_START],eax ; fat_start = partition_start + reserved
movzx eax,byte [ebx+0xd] ; sectors per cluster
mov [SECTORS_PER_CLUSTER],eax
movzx ecx,word [ebx+0xb] ; bytes per sector
mov [BYTES_PER_SECTOR],ecx
movzx eax,word [ebx+0x11] ; count of rootdir entries (=0 fat32)
mov edx,32
mul edx
dec ecx
add eax,ecx ; round up if not equal count
inc ecx ; bytes per sector
div ecx
mov [ROOT_SECTORS],eax ; count of rootdir sectors
movzx eax,word [ebx+0x16] ; sectors per fat <65536
test eax,eax
jnz fat16_fatsize
mov eax,[ebx+0x24] ; sectors per fat
fat16_fatsize:
mov [SECTORS_PER_FAT],eax
movzx eax,byte [ebx+0x10] ; number of fats
test eax,eax ; if 0 it's not fat partition
jz problem_fat_dec_count
mov [NUMBER_OF_FATS],eax
imul eax,[SECTORS_PER_FAT]
add eax,[FAT_START]
mov [ROOT_START],eax ; rootdir = fat_start + fat_size * fat_count
add eax,[ROOT_SECTORS] ; rootdir sectors should be 0 on fat32
mov [DATA_START],eax ; data area = rootdir + rootdir_size
movzx eax,word [ebx+0x13] ; total sector count <65536
test eax,eax
jnz fat16_total
mov eax,[ebx+0x20] ; total sector count
fat16_total:
add eax,[PARTITION_START]
dec eax
mov [PARTITION_END],eax
inc eax
sub eax,[DATA_START] ; eax = count of data sectors
xor edx,edx
div dword [SECTORS_PER_CLUSTER]
inc eax
mov [LAST_CLUSTER],eax
dec eax ; cluster count
; limits by Microsoft Hardware White Paper v1.03
cmp eax,4085 ; 0xff5
jb problem_fat_dec_count ; fat12 not supported
cmp eax,65525 ; 0xfff5
jb fat16_partition
fat32_partition:
mov eax,[ebx+0x2c] ; rootdir cluster
mov [ROOT_CLUSTER],eax
movzx eax,word [ebx+0x30] ; fs info sector
add eax,[PARTITION_START]
mov [ADR_FSINFO],eax
popad
mov [fatRESERVED],0x0FFFFFF6
mov [fatBAD],0x0FFFFFF7
mov [fatEND],0x0FFFFFF8
mov [fatMASK],0x0FFFFFFF
mov [fat_type],32 ; Fat32
mov [hd1_status],0 ; free
ret
fat16_partition:
xor eax,eax
mov [ROOT_CLUSTER],eax
popad
mov [fatRESERVED],0x0000FFF6
mov [fatBAD],0x0000FFF7
mov [fatEND],0x0000FFF8
mov [fatMASK],0x0000FFFF
mov [fat_type],16 ; Fat16
mov [hd1_status],0 ; free
ret

/kernel/tags/kolibri0.6.0.0/fs/fs_phys.inc
0,0 → 1,111
hd_phys_read:
;eax - sector number
;ebx - destination
pushad
call wait_for_hd_idle
popad
push edx
push eax
cli
xor eax,eax
mov edx,[hdbase]
inc edx
out dx,al
inc edx
inc eax
out dx,al
inc edx
;write sector number.
mov eax,[esp]
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
and al,1+2+4+8
add al,byte [hdid] ;+0 or +16
or al,32+64+128
out dx,al
inc edx
mov al,0x20
out dx,al
sti
call wait_for_sector_buffer
cmp [hd_error],0
jnz hd_read_error
cli
push edi
mov edi,ebx
mov ecx,256
mov edx,[hdbase]
cld
rep insw
pop edi
sti
pop edx
pop eax
ret
hd_phys_write:
;eax - sector number
;ebx - destination
cmp eax,[partition_start]
jb .ret
cmp eax,[partition_end]
ja .ret
pushad
call wait_for_hd_idle
popad
push edx
push eax
cli
xor eax,eax
mov edx,[hdbase]
inc edx
out dx,al
inc edx
inc eax
out dx,al
;write sector number
inc edx
mov eax,[esp]
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
out dx,al
shr eax,8
inc edx
and al,1+2+4+8
add al,byte [hdid] ;+0 or +16
or al,32+64+128
out dx,al
inc edx
mov al,0x30
out dx,al
sti
call wait_for_sector_buffer
cmp [hd_error],0
jnz hd_write_error
cli
push esi
mov esi,ebx
mov ecx,256
mov edx,[hdbase]
cld
rep outsw
pop esi
sti
pop edx
pop eax
.ret:
ret