/kernel/branches/Kolibri-acpi/boot/bootcode.inc |
---|
0,0 → 1,1191 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Copyright (C) MenuetOS 2000-2004 Ville Mikael Turjanmaa ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;; BOOTCODE.INC ;; |
;; ;; |
;; KolibriOS 16-bit loader, ;; |
;; based on bootcode for MenuetOS ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
;========================================================================== |
; |
; 16 BIT FUNCTIONS |
; |
;========================================================================== |
putchar: |
; in: al=character |
mov ah, 0Eh |
mov bh, 0 |
int 10h |
ret |
print: |
; in: si->string |
mov al, 186 |
call putchar |
mov al, ' ' |
call putchar |
printplain: |
; in: si->string |
pusha |
lodsb |
@@: |
call putchar |
lodsb |
test al,al |
jnz @b |
popa |
ret |
getkey: |
; get number in range [bl,bh] (bl,bh in ['0'..'9']) |
; in: bx=range |
; out: ax=digit (1..9, 10 for 0) |
mov ah, 0 |
int 16h |
cmp al, bl |
jb getkey |
cmp al, bh |
ja getkey |
push ax |
call putchar |
pop ax |
and ax, 0Fh |
jnz @f |
mov al, 10 |
@@: |
ret |
setcursor: |
; in: dl=column, dh=row |
mov ah, 2 |
mov bh, 0 |
int 10h |
ret |
macro _setcursor row,column |
{ |
mov dx, row*256 + column |
call setcursor |
} |
boot_read_floppy: |
push si |
xor si, si |
mov ah, 2 ; read |
@@: |
push ax |
int 0x13 |
pop ax |
jnc @f |
inc si |
cmp si, 10 |
jb @b |
mov si, badsect |
sayerr_plain: |
call printplain |
jmp $ |
@@: |
pop si |
ret |
; convert abs. sector number (AX) to BIOS T:H:S |
; sector number = (abs.sector%BPB_SecPerTrk)+1 |
; pre.track number = (abs.sector/BPB_SecPerTrk) |
; head number = pre.track number%BPB_NumHeads |
; track number = pre.track number/BPB_NumHeads |
; Return: cl - sector number |
; ch - track number |
; dl - drive number (0 = a:) |
; dh - head number |
conv_abs_to_THS: |
push bx |
mov bx,word [BPB_SecPerTrk] |
xor dx,dx |
div bx |
inc dx |
mov cl, dl ; cl = sector number |
mov bx,word [BPB_NumHeads] |
xor dx,dx |
div bx |
; !!!!!!! ax = track number, dx = head number |
mov ch,al ; ch=track number |
xchg dh,dl ; dh=head number |
mov dl,0 ; dl=0 (drive 0 (a:)) |
pop bx |
retn |
; needed variables |
BPB_SecPerTrk dw 0 ; sectors per track |
BPB_NumHeads dw 0 ; number of heads |
BPB_FATSz16 dw 0 ; size of FAT |
BPB_RootEntCnt dw 0 ; count of root dir. entries |
BPB_BytsPerSec dw 0 ; bytes per sector |
BPB_RsvdSecCnt dw 0 ; number of reserved sectors |
BPB_TotSec16 dw 0 ; count of the sectors on the volume |
BPB_SecPerClus db 0 ; number of sectors per cluster |
BPB_NumFATs db 0 ; number of FAT tables |
abs_sector_adj dw 0 ; adjustment to make abs. sector number |
end_of_FAT dw 0 ; end of FAT table |
FirstDataSector dw 0 ; begin of data |
;========================================================================= |
; |
; 16 BIT CODE |
; |
;========================================================================= |
include 'bootvesa.inc' ;Include source for boot vesa |
start_of_code: |
cld |
; \begin{diamond}[02.12.2005] |
; if bootloader sets ax = 'KL', then ds:si points to loader block |
cmp ax, 'KL' |
jnz @f |
mov word [cs:cfgmanager.loader_block], si |
mov word [cs:cfgmanager.loader_block+2], ds |
@@: |
; \end{diamond}[02.12.2005] |
; if bootloader sets cx = 'HA' and dx = 'RD', then bx contains identifier of source hard disk |
; (see comment to bx_from_load) |
cmp cx, 'HA' |
jnz no_hd_load |
cmp dx,'RD' |
jnz no_hd_load |
mov word [cs:bx_from_load], bx ; {SPraid}[13.03.2007] |
no_hd_load: |
; set up stack |
mov ax, 3000h |
mov ss, ax |
mov sp, 0EC00h |
; set up segment registers |
push cs |
pop ds |
push cs |
pop es |
; set videomode |
mov ax, 3 |
int 0x10 |
if lang eq ru |
; Load & set russian VGA font (RU.INC) |
mov bp, RU_FNT1 ; RU_FNT1 - First part |
mov bx, 1000h ; 768 bytes |
mov cx, 30h ; 48 symbols |
mov dx, 80h ; 128 - position of first symbol |
mov ax, 1100h |
int 10h |
mov bp, RU_FNT2 ; RU_FNT2 -Second part |
mov bx, 1000h ; 512 bytes |
mov cx, 20h ; 32 symbols |
mov dx, 0E0h ; 224 - position of first symbol |
mov ax, 1100h |
int 10h |
; End set VGA russian font |
else if lang eq et |
mov bp, ET_FNT ; ET_FNT1 |
mov bx, 1000h ; |
mov cx, 255 ; 256 symbols |
xor dx, dx ; 0 - position of first symbol |
mov ax, 1100h |
int 10h |
end if |
; draw frames |
push 0xb800 |
pop es |
xor di, di |
mov ah, 1*16+15 |
; draw top |
mov si, d80x25_top |
mov cx, d80x25_top_num * 80 |
@@: |
lodsb |
stosw |
loop @b |
; draw spaces |
mov si, space_msg |
mov dx, 25 - d80x25_top_num - d80x25_bottom_num |
dfl1: |
push si |
mov cx, 80 |
@@: |
lodsb |
stosw |
loop @b |
pop si |
dec dx |
jnz dfl1 |
; draw bottom |
mov si, d80x25_bottom |
mov cx, d80x25_bottom_num * 80 |
@@: |
lodsb |
stosw |
loop @b |
mov byte [space_msg+80], 0 ; now space_msg is null terminated |
_setcursor d80x25_top_num,0 |
; TEST FOR 386+ |
mov bx, 0x4000 |
pushf |
pop ax |
mov dx, ax |
xor ax, bx |
push ax |
popf |
pushf |
pop ax |
and ax, bx |
and dx, bx |
cmp ax, dx |
jnz cpugood |
mov si, not386 |
sayerr: |
call print |
jmp $ |
cpugood: |
push 0 |
popf |
sti |
; set up esp |
movzx esp, sp |
push 0 |
pop es |
and word [es:0x9031], 0 |
; \begin{Mario79} |
; find HDD IDE DMA PCI device |
; check for PCI BIOS |
mov ax, 0xB101 |
int 0x1A |
jc .nopci |
cmp edx, 'PCI ' |
jnz .nopci |
; find PCI class code |
; class 1 = mass storage |
; subclass 1 = IDE controller |
; a) class 1, subclass 1, programming interface 0x80 |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x80 |
xor si, si ; device index = 0 |
int 0x1A |
jnc .found |
; b) class 1, subclass 1, programming interface 0x8A |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x8A |
xor si, si ; device index = 0 |
int 0x1A |
jnc .found |
; c) class 1, subclass 1, programming interface 0x85 |
mov ax, 0xB103 |
mov ecx, 1*10000h + 1*100h + 0x85 |
xor si, si |
int 0x1A |
jc .nopci |
.found: |
; get memory base |
mov ax, 0xB10A |
mov di, 0x20 ; memory base is config register at 0x20 |
int 0x1A |
jc .nopci |
and cx, 0xFFF0 ; clear address decode type |
mov [es:0x9031], cx |
.nopci: |
; \end{Mario79} |
mov al, 0xf6 ; Ñáðîñ êëàâèàòóðû, ðàçðåøèòü ñêàíèðîâàíèå |
out 0x60, al |
xor cx, cx |
wait_loop: ; variant 2 |
; reading state of port of 8042 controller |
in al, 64h |
and al, 00000010b ; ready flag |
; wait until 8042 controller is ready |
loopnz wait_loop |
;;;/diamond today 5.02.2008 |
; set keyboard typematic rate & delay |
mov al, 0xf3 |
out 0x60, al |
xor cx, cx |
@@: |
in al, 64h |
test al, 2 |
loopnz @b |
mov al, 0 |
out 0x60, al |
xor cx, cx |
@@: |
in al, 64h |
test al, 2 |
loopnz @b |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
; --------------- APM --------------------- |
and word [es:0x9044], 0 ; ver = 0.0 (APM not found) |
mov ax, 0x5300 |
xor bx, bx |
int 0x15 |
jc apm_end ; APM not found |
test cx, 2 |
jz apm_end ; APM 32-bit protected-mode interface not supported |
mov [es:0x9044], ax ; Save APM Version |
mov [es:0x9046], cx ; Save APM flags |
; Write APM ver ---- |
and ax, 0xf0f |
add ax, '00' |
mov si, msg_apm |
mov [si + 5], ah |
mov [si + 7], al |
_setcursor 0, 3 |
call printplain |
; ------------------ |
mov ax, 0x5304 ; Disconnect interface |
xor bx, bx |
int 0x15 |
mov ax, 0x5303 ; Connect 32 bit mode interface |
xor bx, bx |
int 0x15 |
mov [es:0x9040], ebx |
mov [es:0x9050], ax |
mov [es:0x9052], cx |
mov [es:0x9054], dx |
apm_end: |
_setcursor d80x25_top_num, 0 |
;CHECK current of code |
cmp [cfgmanager.loader_block], -1 |
jz noloaderblock |
les bx, [cfgmanager.loader_block] |
cmp byte [es:bx], 1 |
mov si, loader_block_error |
jnz sayerr |
push 0 |
pop es |
noloaderblock: |
; DISPLAY VESA INFORMATION |
call print_vesa_info |
call calc_vmodes_table |
call check_first_parm ;check and enable cursor_pos |
; \begin{diamond}[30.11.2005] |
cfgmanager: |
; settings: |
; a) preboot_graph = graphical mode |
; preboot_gprobe = probe this mode? |
; b) preboot_dma = use DMA access? |
; c) preboot_vrrm = use VRR? |
; d) preboot_device = from what boot? |
; determine default settings |
mov [.bSettingsChanged], 0 |
;.preboot_gr_end: |
mov di, preboot_device |
; if image in memory is present and [preboot_device] is uninitialized, |
; set it to use this preloaded image |
cmp byte [di], 0 |
jnz .preboot_device_inited |
cmp [.loader_block], -1 |
jz @f |
les bx, [.loader_block] |
test byte [es:bx+1], 1 |
jz @f |
mov byte [di], 3 |
jmp .preboot_device_inited |
@@: |
; otherwise, set [preboot_device] to 1 (default value - boot from floppy) |
mov byte [di], 1 |
.preboot_device_inited: |
; following 4 lines set variables to 1 if its current value is 0 |
cmp byte [di+preboot_dma-preboot_device], 1 |
adc byte [di+preboot_dma-preboot_device], 0 |
cmp byte [di+preboot_biosdisk-preboot_device], 1 |
adc byte [di+preboot_biosdisk-preboot_device], 0 |
; default value for VRR is OFF |
cmp byte [di+preboot_vrrm-preboot_device], 0 |
jnz @f |
mov byte [di+preboot_vrrm-preboot_device], 2 |
@@: |
; notify user |
_setcursor 5,2 |
mov si, linef |
call printplain |
mov si, start_msg |
call print |
mov si, time_msg |
call print |
; get start time |
call .gettime |
mov [.starttime], eax |
mov word [.timer], .newtimer |
mov word [.timer+2], cs |
.printcfg: |
_setcursor 9,0 |
mov si, current_cfg_msg |
call print |
mov si, curvideo_msg |
call print |
call draw_current_vmode |
mov si, usebd_msg |
cmp [preboot_biosdisk], 1 |
call .say_on_off |
mov si, vrrm_msg |
cmp [preboot_vrrm], 1 |
call .say_on_off |
mov si, preboot_device_msg |
call print |
mov al, [preboot_device] |
and eax, 7 |
mov si, [preboot_device_msgs+eax*2] |
call printplain |
.show_remarks: |
; show remarks in gray color |
mov di, ((21-num_remarks)*80 + 2)*2 |
push 0xB800 |
pop es |
mov cx, num_remarks |
mov si, remarks |
.write_remarks: |
lodsw |
push si |
xchg ax, si |
mov ah, 1*16+7 ; background: blue (1), foreground: gray (7) |
push di |
.write_remark: |
lodsb |
test al, al |
jz @f |
stosw |
jmp .write_remark |
@@: |
pop di |
pop si |
add di, 80*2 |
loop .write_remarks |
.wait: |
_setcursor 25,0 ; out of screen |
; set timer interrupt handler |
cli |
push 0 |
pop es |
push dword [es:8*4] |
pop dword [.oldtimer] |
push dword [.timer] |
pop dword [es:8*4] |
; mov eax, [es:8*4] |
; mov [.oldtimer], eax |
; mov eax, [.timer] |
; mov [es:8*4], eax |
sti |
; wait for keypressed |
xor ax,ax |
int 16h |
push ax |
; restore timer interrupt |
; push 0 |
; pop es |
mov eax, [.oldtimer] |
mov [es:8*4], eax |
mov [.timer], eax |
_setcursor 7,0 |
mov si, space_msg |
call printplain |
; clear remarks and restore normal attributes |
push es |
mov di, ((21-num_remarks)*80 + 2)*2 |
push 0xB800 |
pop es |
mov cx, num_remarks |
mov ax, ' ' + (1*16 + 15)*100h |
@@: |
push cx |
mov cx, 76 |
rep stosw |
pop cx |
add di, 4*2 |
loop @b |
pop es |
pop ax |
; switch on key |
cmp al, 13 |
jz .continue |
or al, 20h |
cmp al, 'a' |
jz .change_a |
cmp al, 'b' |
jz .change_b |
cmp al, 'c' |
jz .change_c |
cmp al, 'd' |
jnz .show_remarks |
_setcursor 15,0 |
mov si, bdev |
call print |
mov bx, '14' |
call getkey |
mov [preboot_device], al |
_setcursor 13,0 |
.d: |
mov [.bSettingsChanged], 1 |
call clear_vmodes_table ;clear vmodes_table |
jmp .printcfg |
.change_a: |
.loops: |
call draw_vmodes_table |
_setcursor 25,0 ; out of screen |
xor ax,ax |
int 0x16 |
; call clear_table_cursor ;clear current position of cursor |
mov si,word [cursor_pos] |
cmp ah,0x48;x,0x48E0 ; up |
jne .down |
cmp si,modes_table |
jbe .loops |
sub word [cursor_pos],size_of_step |
jmp .loops |
.down: cmp ah,0x50;x,0x50E0 ; down |
jne .pgup |
cmp word[es:si+10],-1 |
je .loops |
add word [cursor_pos],size_of_step |
jmp .loops |
.pgup: cmp ah,0x49 ; page up |
jne .pgdn |
sub si, size_of_step*long_v_table |
cmp si, modes_table |
jae @f |
mov si, modes_table |
@@: |
mov word [cursor_pos], si |
mov si, word [home_cursor] |
sub si, size_of_step*long_v_table |
cmp si, modes_table |
jae @f |
mov si, modes_table |
@@: |
mov word [home_cursor], si |
jmp .loops |
.pgdn: cmp ah,0x51 ; page down |
jne .enter |
mov ax, [end_cursor] |
add si, size_of_step*long_v_table |
cmp si, ax |
jb @f |
mov si, ax |
sub si, size_of_step |
@@: |
mov word [cursor_pos], si |
mov si, word [home_cursor] |
sub ax, size_of_step*long_v_table |
add si, size_of_step*long_v_table |
cmp si, ax |
jb @f |
mov si, ax |
@@: |
mov word [home_cursor], si |
jmp .loops |
.enter: cmp al,0x0D;x,0x1C0D ; enter |
jne .loops |
push word [cursor_pos] |
pop bp |
push word [es:bp] |
pop word [x_save] |
push word [es:bp+2] |
pop word [y_save] |
push word [es:bp+6] |
pop word [number_vm] |
mov word [preboot_graph],bp ;save choose |
jmp .d |
.change_b: |
_setcursor 15,0 |
; mov si, ask_dma |
; call print |
; mov bx, '13' |
; call getkey |
; mov [preboot_dma], al |
mov si, ask_bd |
call print |
mov bx, '12' |
call getkey |
mov [preboot_biosdisk], al |
_setcursor 11,0 |
jmp .d |
.change_c: |
_setcursor 15,0 |
mov si, vrrmprint |
call print |
mov bx, '12' |
call getkey |
mov [preboot_vrrm], al |
_setcursor 12,0 |
jmp .d |
;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
.say_on_off: |
pushf |
call print |
mov si, on_msg |
popf |
jz @f |
mov si, off_msg |
@@: jmp printplain |
; novesa and vervesa strings are not used at the moment of executing this code |
virtual at novesa |
.oldtimer dd ? |
.starttime dd ? |
.bSettingsChanged db ? |
.timer dd ? |
end virtual |
.loader_block dd -1 |
.gettime: |
mov ah, 0 |
int 1Ah |
xchg ax, cx |
shl eax, 10h |
xchg ax, dx |
ret |
.newtimer: |
push ds |
push cs |
pop ds |
pushf |
call [.oldtimer] |
pushad |
call .gettime |
sub eax, [.starttime] |
sub ax, 18*5 |
jae .timergo |
neg ax |
add ax, 18-1 |
mov bx, 18 |
xor dx, dx |
div bx |
if lang eq ru |
; ¯®¤®¦¤¨â¥ 5 ᥪã¤, 4/3/2 ᥪã¤ë, 1 ᥪã¤ã |
cmp al, 5 |
mov cl, ' ' |
jae @f |
cmp al, 1 |
mov cl, 'ã' |
jz @f |
mov cl, 'ë' |
@@: mov [time_str+9], cl |
else if lang eq et |
cmp al, 1 |
ja @f |
mov [time_str+9], ' ' |
mov [time_str+10],' ' |
@@: |
else |
; wait 5/4/3/2 seconds, 1 second |
cmp al, 1 |
mov cl, 's' |
ja @f |
mov cl, ' ' |
@@: mov [time_str+9], cl |
end if |
add al, '0' |
mov [time_str+1], al |
mov si, time_msg |
_setcursor 7,0 |
call print |
_setcursor 25,0 |
popad |
pop ds |
iret |
.timergo: |
push 0 |
pop es |
mov eax, [.oldtimer] |
mov [es:8*4], eax |
mov sp, 0EC00h |
.continue: |
sti |
_setcursor 6,0 |
mov si, space_msg |
call printplain |
call printplain |
_setcursor 6,0 |
mov si, loading_msg |
call print |
_setcursor 15,0 |
cmp [.bSettingsChanged], 0 |
jz .load |
cmp [.loader_block], -1 |
jz .load |
les bx, [.loader_block] |
mov eax, [es:bx+3] |
push ds |
pop es |
test eax, eax |
jz .load |
push eax |
mov si, save_quest |
call print |
.waityn: |
mov ah, 0 |
int 16h |
or al, 20h |
cmp al, 'n' |
jz .loadc |
cmp al, 'y' |
jnz .waityn |
call putchar |
mov byte [space_msg+80], 186 |
pop eax |
push cs |
push .cont |
push eax |
retf ;call back |
.loadc: |
pop eax |
.cont: |
push cs |
pop ds |
mov si, space_msg |
mov byte [si+80], 0 |
_setcursor 15,0 |
call printplain |
_setcursor 15,0 |
.load: |
; \end{diamond}[02.12.2005] |
; ASK GRAPHICS MODE |
call set_vmode |
; GRAPHICS ACCELERATION |
; force yes |
mov [es:0x901C], byte 1 |
; DMA ACCESS TO HD |
mov al, [preboot_dma] |
mov [es:0x901F], al |
; VRR_M USE |
mov al,[preboot_vrrm] |
mov [es:0x9030], al |
mov [es:0x901E], byte 1 |
; BOOT DEVICE |
mov al, [preboot_device] |
dec al |
mov [boot_dev], al |
; GET MEMORY MAP |
include 'detect/biosmem.inc' |
; READ DISKETTE TO MEMORY |
cmp [boot_dev],0 |
jne no_sys_on_floppy |
mov si,diskload |
call print |
xor ax, ax ; reset drive |
xor dx, dx |
int 0x13 |
; do we boot from CD-ROM? |
mov ah, 41h |
mov bx, 55AAh |
xor dx, dx |
int 0x13 |
jc .nocd |
cmp bx, 0AA55h |
jnz .nocd |
mov ah, 48h |
push ds |
push es |
pop ds |
mov si, 0xa000 |
mov word [si], 30 |
int 0x13 |
pop ds |
jc .nocd |
push ds |
lds si, [es:si+26] |
test byte [ds:si+10], 40h |
pop ds |
jz .nocd |
; yes - read all floppy by 18 sectors |
; TODO: !!!! read only first sector and set variables !!!!! |
; ... |
; TODO: !!! then read flippy image track by track |
mov cx, 0x0001 ; startcyl,startsector |
.a1: |
push cx dx |
mov al, 18 |
mov bx, 0xa000 |
call boot_read_floppy |
mov si, movedesc |
push es |
push ds |
pop es |
mov cx, 256*18 |
mov ah, 0x87 |
int 0x15 |
pop es |
pop dx cx |
test ah, ah |
jnz sayerr_floppy |
add dword [si+8*3+2], 512*18 |
inc dh |
cmp dh, 2 |
jnz .a1 |
mov dh, 0 |
inc ch |
cmp ch, 80 |
jae ok_sys_on_floppy |
pusha |
mov al, ch |
shr ch, 2 |
add al, ch |
aam |
xchg al, ah |
add ax, '00' |
mov si, pros |
mov [si], ax |
call printplain |
popa |
jmp .a1 |
.nocd: |
; no - read only used sectors from floppy |
; now load floppy image to memory |
; at first load boot sector and first FAT table |
; read only first sector and fill variables |
mov cx, 0x0001 ; first logical sector |
xor dx, dx ; head = 0, drive = 0 (a:) |
mov al, 1 ; read one sector |
mov bx, 0xB000 ; es:bx -> data area |
call boot_read_floppy |
; fill the necessary parameters to work with a floppy |
mov ax, word [es:bx+24] |
mov word [BPB_SecPerTrk], ax |
mov ax, word [es:bx+26] |
mov word [BPB_NumHeads], ax |
mov ax, word [es:bx+17] |
mov word [BPB_RootEntCnt], ax |
mov ax, word [es:bx+14] |
mov word [BPB_RsvdSecCnt], ax |
mov ax, word [es:bx+19] |
mov word [BPB_TotSec16], ax |
mov al, byte [es:bx+13] |
mov byte [BPB_SecPerClus], al |
mov al, byte [es:bx+16] |
mov byte [BPB_NumFATs], al |
;<Lrz> 18.11.2008 |
mov ax, word [es:bx+22] |
mov word [BPB_FATSz16], ax |
mov cx, word [es:bx+11] |
mov word [BPB_BytsPerSec], cx |
; count of clusters in FAT12 ((size_of_FAT*2)/3) |
; mov ax, word [BPB_FATSz16] |
; mov cx, word [BPB_BytsPerSec] |
;end <Lrz> 18.11.2008 |
xor dx, dx |
mul cx |
shl ax, 1 |
mov cx, 3 |
div cx ; now ax - number of clusters in FAT12 |
mov word [end_of_FAT], ax |
; load first FAT table |
mov cx, 0x0002 ; startcyl,startsector ; TODO!!!!! |
xor dx, dx ; starthead,drive |
mov al, byte [BPB_FATSz16] ; no of sectors to read |
add bx, word [BPB_BytsPerSec] ; es:bx -> data area |
call boot_read_floppy |
mov bx, 0xB000 |
; and copy them to extended memory |
mov si, movedesc |
mov [si+8*2+3], bh ; from |
mov ax, word [BPB_BytsPerSec] |
shr ax, 1 ; words per sector |
mov cx, word [BPB_RsvdSecCnt] |
add cx, word [BPB_FATSz16] |
mul cx |
push ax ; save to stack count of words in boot+FAT |
xchg ax, cx |
push es |
push ds |
pop es |
mov ah, 0x87 |
int 0x15 |
pop es |
test ah, ah |
jz @f |
sayerr_floppy: |
mov dx, 0x3f2 |
mov al, 0 |
out dx, al |
mov si, memmovefailed |
jmp sayerr_plain |
@@: |
pop ax ; restore from stack count of words in boot+FAT |
shl ax, 1 ; make bytes count from count of words |
and eax, 0ffffh |
add dword [si+8*3+2], eax |
; copy first FAT to second copy |
; TODO: BPB_NumFATs !!!!! |
add bx, word [BPB_BytsPerSec] ; !!! TODO: may be need multiply by BPB_RsvdSecCnt !!! |
mov byte [si+8*2+3], bh ; bx - begin of FAT |
mov ax, word [BPB_BytsPerSec] |
shr ax, 1 ; words per sector |
mov cx, word [BPB_FATSz16] |
mul cx |
mov cx, ax ; cx - count of words in FAT |
push es |
push ds |
pop es |
mov ah, 0x87 |
int 0x15 |
pop es |
test ah, ah |
jnz sayerr_floppy |
mov ax, cx |
shl ax, 1 |
and eax, 0ffffh ; ax - count of bytes in FAT |
add dword [si+8*3+2], eax |
; reading RootDir |
; TODO: BPB_NumFATs |
add bx, ax |
add bx, 100h |
and bx, 0ff00h ; bx - place in buffer to write RootDir |
push bx |
mov bx, word [BPB_BytsPerSec] |
shr bx, 5 ; divide bx by 32 |
mov ax, word [BPB_RootEntCnt] |
xor dx, dx |
div bx |
push ax ; ax - count of RootDir sectors |
mov ax, word [BPB_FATSz16] |
xor cx, cx |
mov cl, byte [BPB_NumFATs] |
mul cx |
add ax, word [BPB_RsvdSecCnt] ; ax - first sector of RootDir |
mov word [FirstDataSector], ax |
pop bx |
push bx |
add word [FirstDataSector], bx ; Begin of data region of floppy |
; read RootDir |
call conv_abs_to_THS |
pop ax |
pop bx ; place in buffer to write |
push ax |
call boot_read_floppy ; read RootDir into buffer |
; copy RootDir |
mov byte [si+8*2+3], bh ; from buffer |
pop ax ; ax = count of RootDir sectors |
mov cx, word [BPB_BytsPerSec] |
mul cx |
shr ax, 1 |
mov cx, ax ; count of words to copy |
push es |
push ds |
pop es |
mov ah, 0x87 |
int 0x15 |
pop es |
mov ax, cx |
shl ax, 1 |
and eax, 0ffffh ; ax - count of bytes in RootDir |
add dword [si+8*3+2], eax ; add count of bytes copied |
; Reading data clusters from floppy |
mov byte [si+8*2+3], bh |
push bx |
mov di, 2 ; First data cluster |
.read_loop: |
mov bx, di |
shr bx, 1 ; bx+di = di*1.5 |
jnc .even |
test word [es:bx+di+0xB200], 0xFFF0 ; TODO: may not be 0xB200 !!! |
jmp @f |
.even: |
test word [es:bx+di+0xB200], 0xFFF ; TODO: may not be 0xB200 !!! |
@@: |
jz .skip |
; read cluster di |
;.read: |
;conv cluster di to abs. sector ax |
; ax = (N-2) * BPB_SecPerClus + FirstDataSector |
mov ax, di |
sub ax, 2 |
xor bx, bx |
mov bl, byte [BPB_SecPerClus] |
mul bx |
add ax, word [FirstDataSector] |
call conv_abs_to_THS |
pop bx |
push bx |
mov al, byte [BPB_SecPerClus] ; number of sectors in cluster |
call boot_read_floppy |
push es |
push ds |
pop es |
pusha |
; |
mov ax, word [BPB_BytsPerSec] |
xor cx, cx |
mov cl, byte [BPB_SecPerClus] |
mul cx |
shr ax, 1 ; ax = (BPB_BytsPerSec * BPB_SecPerClus)/2 |
mov cx, ax ; number of words to copy (count words in cluster) |
; |
mov ah, 0x87 |
int 0x15 ; copy data |
test ah, ah |
popa |
pop es |
jnz sayerr_floppy |
; skip cluster di |
.skip: |
mov ax, word [BPB_BytsPerSec] |
xor cx, cx |
mov cl, byte [BPB_SecPerClus] |
mul cx |
and eax, 0ffffh ; ax - count of bytes in cluster |
add dword [si+8*3+2], eax |
mov ax, word [end_of_FAT] ; max cluster number |
pusha |
; draw percentage |
; total clusters: ax |
; read clusters: di |
xchg ax, di |
mov cx, 100 |
mul cx |
div di |
aam |
xchg al, ah |
add ax, '00' |
mov si, pros |
cmp [si], ax |
jz @f |
mov [si], ax |
call printplain |
@@: |
popa |
inc di |
cmp di, word [end_of_FAT] ; max number of cluster |
jnz .read_loop |
pop bx ; clear stack |
ok_sys_on_floppy: |
mov si, backspace2 |
call printplain |
mov si, okt |
call printplain |
no_sys_on_floppy: |
xor ax, ax ; reset drive |
xor dx, dx |
int 0x13 |
mov dx, 0x3f2 ; floppy motor off |
mov al, 0 |
out dx, al |
; SET GRAPHICS |
xor ax, ax |
mov es, ax |
mov ax, [es:0x9008] ; vga & 320x200 |
mov bx, ax |
cmp ax, 0x13 |
je setgr |
cmp ax, 0x12 |
je setgr |
mov ax, 0x4f02 ; Vesa |
setgr: |
int 0x10 |
test ah, ah |
mov si, fatalsel |
jnz v_mode_error |
; set mode 0x12 graphics registers: |
cmp bx, 0x12 |
jne gmok2 |
mov al, 0x05 |
mov dx, 0x03ce |
push dx |
out dx, al ; select GDC mode register |
mov al, 0x02 |
inc dx |
out dx, al ; set write mode 2 |
mov al, 0x02 |
mov dx, 0x03c4 |
out dx, al ; select VGA sequencer map mask register |
mov al, 0x0f |
inc dx |
out dx, al ; set mask for all planes 0-3 |
mov al, 0x08 |
pop dx |
out dx, al ; select GDC bit mask register |
; for writes to 0x03cf |
gmok2: |
push ds |
pop es |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/booteng.inc |
---|
0,0 → 1,110 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
$Revision$ |
d80x25_bottom: |
db 186,' KolibriOS is based on MenuetOS and comes with ABSOLUTELY ' |
db 'NO WARRANTY ',186 |
db 186,' See file COPYING for details ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
msg_apm db " APM x.x ", 0 |
vervesa db "Version of Vesa: Vesa x.x",13,10,0 |
novesa db "Display: EGA/CGA",13,10,0 |
s_vesa db "Version of VESA: " |
.ver db "?.?",13,10,0 |
gr_mode db "Select a videomode: ",13,10,0 |
;s_bpp db 13,10,186," «ã¡¨ 梥â : " |
; .bpp dw "??" |
; db 13,10,0 |
vrrmprint db "Apply VRR? (picture frequency greater than 60Hz" |
db " only for transfers:",13,10 |
db 186," 1024*768->800*600 and 800*600->640*480) [1-yes,2-no]:",0 |
ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0 |
bdev db "Load ramdisk from [1-floppy; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-use preloaded ram-image from kernel restart;" |
db 13,10,186," " |
db "4-create blank image]: ",0 |
probetext db 13,10,13,10,186," Use standart graphics mode? [1-yes, " |
db "2-probe bios (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fatal - Videomode not found.",0 |
;modena db "Fatal - VBE 0x112+ required.",0 |
not386 db "Fatal - CPU 386+ required.",0 |
btns db "Fatal - Can't determine color depth.",0 |
fatalsel db "Fatal - Graphics mode not supported by hardware.",0 |
pres_key db "Press any key to choose a new videomode.",0 |
badsect db 13,10,186," Fatal - Bad sector. Replace floppy.",0 |
memmovefailed db 13,10,186," Fatal - Int 0x15 move failed.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Loading diskette: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Press [abcd] to change settings, press [Enter] to continue booting",13,10,0 |
time_msg db " or wait " |
time_str db " 5 seconds" |
db " before automatical continuation",13,10,0 |
current_cfg_msg db "Current settings:",13,10,0 |
curvideo_msg db " [a] Videomode: ",0 |
;modes_msg dw mode4,mode1,mode2,mode3 |
;modevesa20 db " with LFB",0 |
;modevesa12 db ", VESA 1.2 Bnk",0 |
mode0 db "320x200, EGA/CGA 256 colors",13,10,0 |
mode9 db "640x480, VGA 16 colors",13,10,0 |
;probeno_msg db " (standard mode)",0 |
;probeok_msg db " (check nonstandard modes)",0 |
;dma_msg db " [b] Use DMA for HDD access:",0 |
usebd_msg db " [b] Add disks visible by BIOS:",0 |
on_msg db " on",13,10,0 |
off_msg db " off",13,10,0 |
;readonly_msg db " only for reading",13,10,0 |
vrrm_msg db " [c] Use VRR:",0 |
preboot_device_msg db " [d] Floppy image: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "real floppy",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "use already loaded image",13,10,0 |
pdm4 db "create blank image",13,10,0 |
loading_msg db "Loading KolibriOS...",0 |
save_quest db "Remember current settings? [y/n]: ",0 |
loader_block_error db "Bootloader data invalid, I cannot continue. Stopped.",0 |
_st db 186,' ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ¿',13,10,0 |
_r1 db 186,' ³ 320x200 EGA/CGA 256 colors ³ ³',13,10,0 |
_r2 db 186,' ³ 640x480 VGA 16 colors ³ ³',13,10,0 |
_rs db 186,' ³ ????x????@?? SVGA VESA ³ ³',13,10,0 |
_bt db 186,' ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÙ',13,10,0 |
remark1 db "Default values were selected to match most of configurations, but not all.",0 |
remark2 db "If you have CRT-monitor, enable VRR in the item [c].",0 |
remark3 db "If the system does not boot, try to disable the item [b].",0 |
remarks dw remark1, remark2, remark3 |
num_remarks = 3 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/bootet.inc |
---|
0,0 → 1,115 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
$Revision$ |
d80x25_bottom: |
db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
db 'NO WARRANTY ',186 |
db 186,' See file COPYING for details ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "Ekraan: EGA/CGA",13,10,0 |
vervesa db "Vesa versioon: Vesa x.x",13,10,0 |
vervesa_off=20 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 värvi: [9] 320x200, " |
db "VGA 16 värvi: [0] 640x480",13,10 |
db 186," Vali reziim: ",0 |
bt24 db "Bitti pikseli kohta: 24",13,10,0 |
bt32 db "Bitti pikseli kohta: 32",13,10,0 |
vrrmprint db "Kinnita VRR? (ekraani sagedus suurem kui 60Hz" |
db " ainult:",13,10 |
db 186," 1024*768->800*600 ja 800*600->640*480) [1-jah,2-ei]:",0 |
;askmouse db " Hiir:" |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " Vali port [1-3]: ",0 |
;no_com1 db 13,10,186, " No COM1 mouse",0 |
;no_com2 db 13,10,186, " No COM2 mouse",0 |
;ask_dma db "Use DMA for HDD access? [1-yes, 2-only for reading, 3-no]: ",0 |
ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0 |
;gr_direct db 186," Use direct LFB writing? " |
; db "[1-yes/2-no] ? ",0 |
;mem_model db 13,10,186," Motherboard memory [1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
bdev db "Paigalda mäluketas [1-diskett; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-kasuta eellaaditud mäluketast kerneli restardist;" |
db 13,10,186," " |
db "4-loo tühi pilt]: ",0 |
probetext db 13,10,13,10,186," Kasuta standartset graafika reziimi? [1-jah, " |
db "2-leia biosist (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fataalne - Videoreziimi ei leitud.",0 |
;modena db "Fataalne - VBE 0x112+ on vajalik.",0 |
not386 db "Fataalne - CPU 386+ on vajalik.",0 |
btns db "Fataalne - Ei suuda värvisügavust määratleda.",0 |
fatalsel db "Fataalne - Graafilist reziimi riistvara ei toeta.",0 |
badsect db 13,10,186," Fataalne - Vigane sektor. Asenda diskett.",0 |
memmovefailed db 13,10,186," Fataalne - Int 0x15 liigutamine ebaõnnestus.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Loen disketti: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Vajuta [abcd] seadete muutmiseks, vajuta [Enter] laadimise jätkamiseks",13,10,0 |
time_msg db " või oota " |
time_str db " 5 sekundit" |
db " automaatseks jätkamiseks",13,10,0 |
current_cfg_msg db "Praegused seaded:",13,10,0 |
curvideo_msg db " [a] Videoreziim: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " koos LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 värvi",0 |
mode10 db "640x480, VGA 16 värvi",0 |
probeno_msg db " (standard reziim)",0 |
probeok_msg db " (kontrolli ebastandardseid reziime)",0 |
;dma_msg db " [b] Kasuta DMA'd HDD juurdepääsuks:",0 |
usebd_msg db " [b] Add disks visible by BIOS:",0 |
on_msg db " sees",13,10,0 |
off_msg db " väljas",13,10,0 |
;readonly_msg db " ainult lugemiseks",13,10,0 |
vrrm_msg db " [c] Kasuta VRR:",0 |
preboot_device_msg db " [d] Disketi kujutis: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "reaalne diskett",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "kasuta juba laaditud kujutist",13,10,0 |
pdm4 db "loo tühi pilt",13,10,0 |
loading_msg db "Laadin KolibriOS...",0 |
save_quest db "Jäta meelde praegused seaded? [y/n]: ",0 |
loader_block_error db "Alglaaduri andmed vigased, ei saa jätkata. Peatatud.",0 |
remark1 db "Default values were selected to match most of configurations, but not all.",0 |
remark2 db "If you have CRT-monitor, enable VRR in the item [c].",0 |
remark3 db "If the system does not boot, try to disable the item [b].",0 |
remarks dw remark1, remark2, remark3 |
num_remarks = 3 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/bootge.inc |
---|
0,0 → 1,120 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;====================================================================== |
; |
; BOOT DATA |
; |
;====================================================================== |
$Revision$ |
d80x25_bottom: |
; db 186,' KolibriOS based on MenuetOS and comes with ABSOLUTELY ' |
; db 'NO WARRANTY ',186 |
; db 186,' See file COPYING for details ' |
; db ' ',186 |
db 186,' KolibriOS basiert auf MenuetOS und wird ohne jegliche ' |
db ' Garantie vertrieben ',186 |
db 186,' Details stehen in der Datei COPYING ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
novesa db "Anzeige: EGA/CGA ",13,10,0 |
vervesa db "Vesa-Version: Vesa ",13,10,0 |
vervesa_off=22 |
msg_apm db " APM x.x ", 0 |
gr_mode db 186," Vesa 2.0+ 16 M LFB: [1] 640x480, [2] 800x600, " |
db "[3] 1024x768, [4] 1280x1024",13,10 |
db 186," Vesa 1.2 16 M Bnk: [5] 640x480, [6] 800x600, " |
db "[7] 1024x768, [8] 1280x1024",13,10 |
db 186," EGA/CGA 256 Farben: [9] 320x200, " |
db "VGA 16 Farben: [0] 640x480",13,10 |
db 186," Waehle Modus: ",0 |
bt24 db "Bits Per Pixel: 24",13,10,0 |
bt32 db "Bits Per Pixel: 32",13,10,0 |
vrrmprint db "VRR verwenden? (Monitorfrequenz groesser als 60Hz" |
db " only for transfers:",13,10 |
db 186," 1024*768->800*600 und 800*600->640*480) [1-ja,2-nein]:",0 |
;askmouse db " Maus angeschlossen an:" |
; db " [1] PS/2 (USB), [2] Com1, [3] Com2." |
; db " Waehle Port [1-3]: ",0 |
;no_com1 db 13,10,186, " Keine COM1 Maus",0 |
;no_com2 db 13,10,186, " Keine COM2 Maus",0 |
;ask_dma db "Nutze DMA zum HDD Zugriff? [1-ja, 2-allein fur Lesen, 3-nein]: ",0 |
ask_bd db "Add disks visible by BIOS emulated in V86-mode? [1-yes, 2-no]: ",0 |
;gr_direct db 186," Benutze direct LFB? " |
; db "[1-ja/2-nein] ? ",0 |
;mem_model db 13,10,186," Hauptspeicher [1-16 Mb / 2-32 Mb / " |
; db "3-64Mb / 4-128 Mb / 5-256 Mb] ? ",0 |
;bootlog db 13,10,186," After bootlog display [1-continue/2-pause] ? ",0 |
bdev db "Lade die Ramdisk von [1-Diskette; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-benutze ein bereits geladenes Kernel image;" |
db 13,10,186," " |
db "4-create blank image]: ",0 |
probetext db 13,10,13,10,186," Nutze Standardgrafikmodi? [1-ja, " |
db "2-BIOS Test (Vesa 3.0)]: ",0 |
;memokz256 db 13,10,186," RAM 256 Mb",0 |
;memokz128 db 13,10,186," RAM 128 Mb",0 |
;memokz64 db 13,10,186," RAM 64 Mb",0 |
;memokz32 db 13,10,186," RAM 32 Mb",0 |
;memokz16 db 13,10,186," RAM 16 Mb",0 |
prnotfnd db "Fatal - Videomodus nicht gefunden.",0 |
;modena db "Fatal - VBE 0x112+ required.",0 |
not386 db "Fatal - CPU 386+ benoetigt.",0 |
btns db "Fatal - konnte Farbtiefe nicht erkennen.",0 |
fatalsel db "Fatal - Grafikmodus nicht unterstuetzt.",0 |
badsect db 13,10,186," Fatal - Sektorfehler, Andere Diskette neutzen.",0 |
memmovefailed db 13,10,186," Fatal - Int 0x15 Fehler.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db "Lade Diskette: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 ; 0=floppy, 1=hd |
start_msg db "Druecke [abcd], um die Einstellungen zu aendern , druecke [Enter] zum starten",13,10,0 |
time_msg db " oder warte " |
time_str db " 5 Sekunden" |
db " bis zum automatischen Start",13,10,0 |
current_cfg_msg db "Aktuelle Einstellungen:",13,10,0 |
curvideo_msg db " [a] Videomodus: ",0 |
mode1 db "640x480",0 |
mode2 db "800x600",0 |
mode3 db "1024x768",0 |
mode4 db "1280x1024",0 |
modes_msg dw mode4,mode1,mode2,mode3 |
modevesa20 db " mit LFB",0 |
modevesa12 db ", VESA 1.2 Bnk",0 |
mode9 db "320x200, EGA/CGA 256 colors",0 |
mode10 db "640x480, VGA 16 colors",0 |
probeno_msg db " (Standard Modus)",0 |
probeok_msg db " (teste nicht-standard Modi)",0 |
;dma_msg db " [b] Nutze DMA zum HDD Aufschreiben:",0 |
usebd_msg db " [b] Add disks visible by BIOS:",0 |
on_msg db " an",13,10,0 |
off_msg db " aus",13,10,0 |
;readonly_msg db " fur Lesen",13,10,0 |
vrrm_msg db " [c] Nutze VRR:",0 |
preboot_device_msg db " [d] Diskettenimage: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3 |
pdm1 db "Echte Diskette",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "Nutze bereits geladenes Image",13,10,0 |
pdm4 db "create blank image",13,10,0 |
loading_msg db "Lade KolibriOS...",0 |
save_quest db "Aktuelle Einstellungen speichern? [y/n]: ",0 |
loader_block_error db "Bootloader Daten ungueltig, Kann nicht fortfahren. Angehalten.",0 |
remark1 db "Default values were selected to match most of configurations, but not all.",0 |
remark2 db "If you have CRT-monitor, enable VRR in the item [c].",0 |
remark3 db "If the system does not boot, try to disable the item [b].",0 |
remarks dw remark1, remark2, remark3 |
num_remarks = 3 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/bootru.inc |
---|
0,0 → 1,91 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;================================================================= |
; |
; BOOT DATA |
; |
;================================================================= |
$Revision$ |
d80x25_bottom: |
db 186,' Kolibri OS ®á®¢ Menuet OS ¨ ¥ ¯à¥¤®áâ ¢«ï¥â ' |
db '¨ª ª¨å £ àa⨩. ',186 |
db 186,' ®¤à®¡¥¥ ᬮâà¨â¥ ¢ ä ©«¥ COPYING.TXT ' |
db ' ',186 |
line_full_bottom |
d80x25_bottom_num = 3 |
msg_apm db " APM x.x ", 0 |
novesa db "¨¤¥®ª àâ : EGA/CGA",13,10,0 |
s_vesa db "¥àá¨ï VESA: " |
.ver db "?.?",13,10,0 |
gr_mode db "ë¡¥à¨â¥ ¢¨¤¥®à¥¦¨¬: ",13,10,0 |
vrrmprint db "ᯮ«ì§®¢ âì VRR? (ç áâ®â ª ¤à®¢ ¢ëè¥ 60 æ" |
db " ⮫쪮 ¤«ï ¯¥à¥å®¤®¢:",13,10 |
db 186," 1024*768>800*600 ¨ 800*600>640*480) [1-¤ , 2-¥â]: ",0 |
;ask_dma db "ᯮ«ì§®¢ âì DMA ¤«ï ¤®áâ㯠ª HDD? [1-¤ , 2-⮫쪮 ç⥨¥, 3-¥â]: ",0 |
ask_bd db "®¡ ¢¨âì ¤¨áª¨, ¢¨¤¨¬ë¥ ç¥à¥§ BIOS ¢ ०¨¬¥ V86? [1-¤ , 2-¥â]: ",0 |
bdev db " £à㧨âì ®¡à § ¨§ [1-¤¨áª¥â ; 2-C:\kolibri.img (FAT32);" |
db 13,10,186," " |
db "3-¨á¯®«ì§®¢ âì 㦥 § £àã¦¥ë© ®¡à §;" |
db 13,10,186," " |
db "4-ᮧ¤ âì ç¨áâë© ®¡à §]: ",0 |
prnotfnd db "訡ª - ¨¤¥®à¥¦¨¬ ¥ ©¤¥.",0 |
not386 db "訡ª - ॡã¥âáï ¯à®æ¥áá®à 386+.",0 |
fatalsel db "訡ª - ë¡à ë© ¢¨¤¥®à¥¦¨¬ ¥ ¯®¤¤¥à¦¨¢ ¥âáï.",0 |
pres_key db " ¦¨¬¨â¥ «î¡ãî ª« ¢¨èã, ¤«ï ¯¥à¥å®¤ ¢ ¢ë¡®à ०¨¬®¢.",0 |
badsect db 13,10,186," 訡ª - ¨áª¥â ¯®¢à¥¦¤¥ . ®¯à®¡ã©â¥ ¤àã£ãî.",0 |
memmovefailed db 13,10,186," 訡ª - Int 0x15 move failed.",0 |
okt db " ... OK" |
linef db 13,10,0 |
diskload db " £à㧪 ¤¨áª¥âë: 00 %",8,8,8,8,0 |
pros db "00" |
backspace2 db 8,8,0 |
boot_dev db 0 |
start_msg db " ¦¬¨â¥ [abcd] ¤«ï ¨§¬¥¥¨ï áâ஥ª, [Enter] ¤«ï ¯à®¤®«¦¥¨ï § £à㧪¨",13,10,0 |
time_msg db " ¨«¨ ¯®¤®¦¤¨â¥ " |
time_str db " 5 ᥪ㭤 " |
db " ¤® ¢â®¬ â¨ç¥áª®£® ¯à®¤®«¦¥¨ï",13,10,0 |
current_cfg_msg db "¥ªã騥 áâனª¨:",13,10,0 |
curvideo_msg db " [a] ¨¤¥®à¥¦¨¬: ",0 |
mode0 db "320x200, EGA/CGA 256 梥⮢",13,10,0 |
mode9 db "640x480, VGA 16 梥⮢",13,10,0 |
usebd_msg db " [b] ®¡ ¢¨âì ¤¨áª¨, ¢¨¤¨¬ë¥ ç¥à¥§ BIOS:",0 |
on_msg db " ¢ª«",13,10,0 |
off_msg db " ¢ëª«",13,10,0 |
readonly_msg db " ⮫쪮 ç⥨¥",13,10,0 |
vrrm_msg db " [c] ᯮ«ì§®¢ ¨¥ VRR:",0 |
preboot_device_msg db " [d] ¡à § ¤¨áª¥âë: ",0 |
preboot_device_msgs dw 0,pdm1,pdm2,pdm3,pdm4 |
pdm1 db " áâ®ïé ï ¤¨áª¥â ",13,10,0 |
pdm2 db "C:\kolibri.img (FAT32)",13,10,0 |
pdm3 db "¨á¯®«ì§®¢ âì 㦥 § £àã¦¥ë© ®¡à §",13,10,0 |
pdm4 db "ᮧ¤ âì ç¨áâë© ®¡à §",13,10,0 |
loading_msg db "¤ñâ § £à㧪 KolibriOS...",0 |
save_quest db " ¯®¬¨âì ⥪ã騥 áâனª¨? [y/n]: ",0 |
loader_block_error db "訡ª ¢ ¤ ëå ç «ì®£® § £àã§ç¨ª , ¯à®¤®«¦¥¨¥ ¥¢®§¬®¦®.",0 |
_st db 186,' ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ¿ ',13,10,0 |
_r1 db 186,' ³ 320x200 EGA/CGA 256 梥⮢ ³ ³ ',13,10,0 |
_r2 db 186,' ³ 640x480 VGA 16 梥⮢ ³ ³ ',13,10,0 |
_rs db 186,' ³ ????x????@?? SVGA VESA ³ ³ ',13,10,0 |
_bt db 186,' ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÙ ',13,10,0 |
remark1 db " ç¥¨ï ¯® 㬮«ç ¨î ¢ë¡à ë ¤«ï 㤮¡á⢠¡®«ìè¨á⢠, ® ¥ ¢á¥å.",0 |
remark2 db " ᫨ ã á -¬®¨â®à, ¢ª«îç¨â¥ VRR ¢ ¯ãªâ¥ [c].",0 |
remark3 db " ᫨ ã á ¥ £à㧨âáï á¨á⥬ , ¯®¯à®¡ã©â¥ ®âª«îç¨âì ¯ãªâ [b].",0 |
remarks dw remark1, remark2, remark3 |
num_remarks = 3 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/bootvesa.inc |
---|
0,0 → 1,755 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
struc VBE_VGAInfo { |
.VESASignature dd ? ; char |
.VESAVersion dw ? ; short |
.OemStringPtr dd ? ; char * |
.Capabilities dd ? ; ulong |
.VideoModePtr dd ? ; ulong |
.TotalMemory dw ? ; short |
; VBE 2.0+ |
.OemSoftwareRev db ? ; short |
.OemVendorNamePtr dw ? ; char * |
.OemProductNamePtr dw ? ; char * |
.OemProductRevPtr dw ? ; char * |
.reserved rb 222 ; char |
.OemData rb 256 ; char |
} |
struc VBE_ModeInfo { |
.ModeAttributes dw ? ; short |
.WinAAttributes db ? ; char |
.WinBAttributes db ? ; char |
.WinGranularity dw ? ; short |
.WinSize dw ? ; short |
.WinASegment dw ? ; ushort |
.WinBSegment dw ? ; ushort |
.WinFuncPtr dd ? ; void * |
.BytesPerScanLine dw ? ; short |
.XRes dw ? ; short |
.YRes dw ? ; short |
.XCharSize db ? ; char |
.YCharSize db ? ; char |
.NumberOfPlanes db ? ; char |
.BitsPerPixel db ? ; char |
.NumberOfBanks db ? ; char |
.MemoryModel db ? ; char |
.BankSize db ? ; char |
.NumberOfImagePages db ? ; char |
.res1 db ? ; char |
.RedMaskSize db ? ; char |
.RedFieldPosition db ? ; char |
.GreenMaskSize db ? ; char |
.GreenFieldPosition db ? ; char |
.BlueMaskSize db ? ; char |
.BlueFieldPosition db ? ; char |
.RsvedMaskSize db ? ; char |
.RsvedFieldPosition db ? ; char |
.DirectColorModeInfo db ? ; char ; MISSED IN THIS TUTORIAL!! SEE ABOVE |
; VBE 2.0+ |
.PhysBasePtr dd ? ; ulong |
.OffScreenMemOffset dd ? ; ulong |
.OffScreenMemSize dw ? ; short |
; VBE 3.0+ |
.LinbytesPerScanLine dw ? ; short |
.BankNumberOfImagePages db ? ; char |
.LinNumberOfImagePages db ? ; char |
.LinRedMaskSize db ? ; char |
.LinRedFieldPosition db ? ; char |
.LingreenMaskSize db ? ; char |
.LinGreenFieldPosition db ? ; char |
.LinBlueMaskSize db ? ; char |
.LinBlueFieldPosition db ? ; char |
.LinRsvdMaskSize db ? ; char |
.LinRsvdFieldPosition db ? ; char |
.MaxPixelClock dd ? ; ulong |
.res2 rb 190 ; char |
} |
virtual at $A000 |
vi VBE_VGAInfo |
mi VBE_ModeInfo |
modes_table: |
end virtual |
cursor_pos dw 0 ;âðåìåííîå õðàíåíèå êóðñîðà. |
home_cursor dw 0 ;current shows rows a table |
end_cursor dw 0 ;end of position current shows rows a table |
scroll_start dw 0 ;start position of scroll bar |
scroll_end dw 0 ;end position of scroll bar |
long_v_table equ 9 ;long of visible video table |
size_of_step equ 10 |
scroll_area_size equ (long_v_table-2) |
int2str: |
dec bl |
jz @f |
xor edx,edx |
div ecx |
push edx |
call int2str |
pop eax |
@@: or al,0x30 |
mov [ds:di],al |
inc di |
ret |
int2strnz: |
cmp eax,ecx |
jb @f |
xor edx,edx |
div ecx |
push edx |
call int2strnz |
pop eax |
@@: or al,0x30 |
mov [es:di],al |
inc di |
ret |
;------------------------------------------------------- |
;Write message about incorrect v_mode and write message about jmp on swith v_mode |
v_mode_error: |
_setcursor 19,2 |
mov si, fatalsel |
call printplain |
_setcursor 20,2 |
mov si,pres_key |
call printplain |
xor eax,eax |
int 16h |
jmp cfgmanager.d |
;------------------------------------------------------- |
; |
;------------------------------------------------------- |
print_vesa_info: |
_setcursor 5,2 |
mov [es:vi.VESASignature],'VBE2' |
mov ax,0x4F00 |
mov di,vi ;0xa000 |
int 0x10 |
or ah,ah |
jz @f |
mov [es:vi.VESASignature],'VESA' |
mov ax,$4F00 |
mov di,vi |
int 0x10 |
or ah,ah |
jnz .exit |
@@: |
cmp [es:vi.VESASignature],'VESA' |
jne .exit |
cmp [es:vi.VESAVersion],0x0100 |
jb .exit |
jmp .vesaok2 |
.exit: |
mov si,novesa |
call printplain |
ret |
.vesaok2: |
mov ax,[es:vi.VESAVersion] |
add ax,'00' |
mov [s_vesa.ver], ah |
mov [s_vesa.ver+2], al |
mov si,s_vesa |
call printplain |
_setcursor 4,2 |
mov si,word[es:vi.OemStringPtr] |
mov di,si |
push ds |
mov ds,word[es:vi.OemStringPtr+2] |
call printplain |
pop ds |
ret |
;----------------------------------------------------------------------------- |
calc_vmodes_table: |
pushad |
; push 0 |
; pop es |
lfs si, [es:vi.VideoModePtr] |
mov bx,modes_table |
;save no vesa mode of work 320x200, EGA/CGA 256 梥⮢ and 640x480, VGA 16 梥⮢ |
mov word [es:bx],640 |
mov word [es:bx+2],480 |
mov word [es:bx+6],0x13 |
mov word [es:bx+10],640 |
mov word [es:bx+12],480 |
mov word [es:bx+16],0x12 |
add bx,20 |
.next_mode: |
mov cx,word [fs:si] ; mode number |
cmp cx,-1 |
je .modes_ok.2 |
mov ax,0x4F01 |
mov di,mi |
int 0x10 |
or ah,ah |
jnz .modes_ok.2;vesa_info.exit |
test [es:mi.ModeAttributes],00000001b ;videomode support ? |
jz @f |
test [es:mi.ModeAttributes],00010000b ;picture ? |
jz @f |
test [es:mi.ModeAttributes],10000000b ;LFB ? |
jz @f |
cmp [es:mi.BitsPerPixel], 24 ;It show only videomodes to have support 24 and 32 bpp |
jb @f |
; cmp [es:mi.BitsPerPixel],16 |
; jne .l0 |
; cmp [es:mi.GreenMaskSize],5 |
; jne .l0 |
; mov [es:mi.BitsPerPixel],15 |
.l0: |
cmp [es:mi.XRes],640 |
jb @f |
cmp [es:mi.YRes],480 |
jb @f |
; cmp [es:mi.BitsPerPixel],8 |
; jb @f |
mov ax,[es:mi.XRes] |
mov [es:bx+0],ax ; +0[2] : resolution X |
mov ax,[es:mi.YRes] |
mov [es:bx+2],ax ; +2[2] : resolution Y |
mov ax,[es:mi.ModeAttributes] |
mov [es:bx+4],ax ; +4[2] : attributes |
cmp [s_vesa.ver],'2' |
jb .lp1 |
or cx,0x4000 ; use LFB |
.lp1: mov [es:bx+6],cx ; +6 : mode number |
movzx ax,byte [es:mi.BitsPerPixel] |
mov word [es:bx+8],ax ; +8 : bits per pixel |
add bx,size_of_step ; size of record |
@@: |
add si,2 |
jmp .next_mode |
.modes_ok.2: |
mov word[es:bx],-1 ;end video table |
mov word[end_cursor],bx ;save end cursor position |
;;;;;;;;;;;;;;;;;; |
;Sort array |
; mov si,modes_table |
;.new_mode: |
; mov ax,word [es:si] |
; cmp ax,-1 |
; je .exxit |
; add ax,word [es:si+2] |
; add ax,word [es:si+8] |
; mov bp,si |
;.again: |
; add bp,12 |
; mov bx,word [es:bp] |
; cmp bx,-1 |
; je .exit |
; add bx,word [es:bp+2] |
; add bx,word [es:bp+8] |
; |
; cmp ax,bx |
; ja .loops |
; jmp .again |
;.loops: |
; push dword [es:si] |
; push dword [es:si+4] |
; push dword [es:si+8] |
; push dword [es:bp] |
; push dword [es:bp+4] |
; push dword [es:bp+8] |
; |
; pop dword [es:si+8] |
; pop dword [es:si+4] |
; pop dword [es:si] |
; pop dword [es:bp+8] |
; pop dword [es:bp+4] |
; pop dword [es:bp] |
; jmp .new_mode |
; |
;.exit: add si,12 |
; jmp .new_mode |
;.exxit: |
popad |
ret |
;----------------------------------------------------------------------------- |
draw_current_vmode: |
push 0 |
pop es |
mov si,word [cursor_pos] |
cmp word [es:si+6],0x12 |
je .no_vesa_0x12 |
cmp word [es:si+6],0x13 |
je .no_vesa_0x13 |
mov di,loader_block_error |
movzx eax,word[es:si+0] |
mov ecx,10 |
call int2strnz |
mov byte[es:di],'x' |
inc di |
movzx eax,word[es:si+2] |
call int2strnz |
mov byte[es:di],'x' |
inc di |
movzx eax,word[es:si+8] |
call int2strnz |
mov dword[es:di],0x00000d0a |
mov si,loader_block_error |
push ds |
push es |
pop ds |
call printplain |
pop ds |
ret |
.no_vesa_0x13: |
mov si,mode0 |
jmp .print |
.no_vesa_0x12: |
mov si,mode9 |
.print: |
call printplain |
ret |
;----------------------------------------------------------------------------- |
check_first_parm: |
mov si,word [preboot_graph] |
test si,si |
jnz .no_zero ;if no zero |
.zerro: |
; mov ax,modes_table |
; mov word [cursor_pos],ax |
; mov word [home_cursor],ax |
; mov word [preboot_graph],ax |
;SET default video of mode first probe will fined a move of work 1024x768@32 |
mov ax,1024 |
mov bx,768 |
mov si,modes_table |
call .loops |
test ax,ax |
jz .ok_found_mode |
mov ax,800 |
mov bx,600 |
mov si,modes_table |
call .loops |
test ax,ax |
jz .ok_found_mode |
mov ax,640 |
mov bx,480 |
mov si,modes_table |
call .loops |
test ax,ax |
jz .ok_found_mode |
mov si,modes_table |
jmp .ok_found_mode |
.no_zero: |
mov bp,word [number_vm] |
cmp bp,word [es:si+6] |
jz .ok_found_mode |
mov ax,word [x_save] |
mov bx,word [y_save] |
mov si,modes_table |
call .loops |
test ax,ax |
jz .ok_found_mode |
mov si,modes_table |
; cmp ax,modes_table |
; jb .zerro ;check on correct if bellow |
; cmp ax,word [end_cursor] |
; ja .zerro ;check on correct if anymore |
.ok_found_mode: |
mov word [home_cursor],si |
; mov word [cursor_pos],si |
mov word [preboot_graph],si |
mov ax,si |
mov ecx,long_v_table |
.loop: add ax,size_of_step |
cmp ax,word [end_cursor] |
jae .next_step |
loop .loop |
.next_step: |
sub ax,size_of_step*long_v_table |
cmp ax,modes_table |
jae @f |
mov ax,modes_table |
@@: |
mov word [home_cursor],ax |
mov si,[preboot_graph] |
mov word [cursor_pos],si |
push word [es:si] |
pop word [x_save] |
push word [es:si+2] |
pop word [y_save] |
push word [es:si+6] |
pop word [number_vm] |
ret |
;;;;;;;;;;;;;;;;;;;;;;;;;;; |
.loops: |
cmp ax,word [es:si] |
jne .next |
cmp bx,word [es:si+2] |
jne .next |
cmp word [es:si+8],32 |
je .ok |
cmp word [es:si+8],24 |
je .ok |
.next: add si,size_of_step |
cmp word [es:si],-1 |
je .exit |
jmp .loops |
.ok: xor ax,ax |
ret |
.exit: or ax,-1 |
ret |
;----------------------------------------------------------------------------- |
;default_vmode: |
;----------------------------------------------------------------------------- |
draw_vmodes_table: |
_setcursor 9, 2 |
mov si,gr_mode |
call printplain |
mov si,_st |
call printplain |
push word [cursor_pos] |
pop ax |
push word [home_cursor] |
pop si |
mov cx,si |
cmp ax,si |
je .ok |
jb .low |
add cx,size_of_step*long_v_table |
cmp ax,cx |
jb .ok |
sub cx,size_of_step*long_v_table |
add cx,size_of_step |
cmp cx,word[end_cursor] |
jae .ok |
add si,size_of_step |
push si |
pop word [home_cursor] |
jmp .ok |
.low: sub cx,size_of_step |
cmp cx,modes_table |
jb .ok |
push cx |
push cx |
pop word [home_cursor] |
pop si |
.ok: |
; calculate scroll position |
push si |
mov ax, [end_cursor] |
sub ax, modes_table |
mov bx, size_of_step |
cwd |
div bx |
mov si, ax ; si = size of list |
mov ax, [home_cursor] |
sub ax, modes_table |
cwd |
div bx |
mov di, ax |
mov ax, scroll_area_size*long_v_table |
cwd |
div si |
test ax, ax |
jnz @f |
inc ax |
@@: |
cmp al, scroll_area_size |
jb @f |
mov al, scroll_area_size |
@@: |
mov cx, ax |
; cx = scroll height |
; calculate scroll pos |
xor bx, bx ; initialize scroll pos |
sub al, scroll_area_size+1 |
neg al |
sub si, long_v_table-1 |
jbe @f |
mul di |
div si |
mov bx, ax |
@@: |
inc bx |
imul ax, bx, size_of_step |
add ax, [home_cursor] |
mov [scroll_start], ax |
imul cx, size_of_step |
add ax, cx |
mov [scroll_end], ax |
pop si |
mov bp,long_v_table ;show rows |
.@@_next_bit: |
;clear cursor |
mov ax,' ' |
mov word[ds:_r1+21],ax |
mov word[ds:_r1+50],ax |
mov word[ds:_r2+21],ax |
mov word[ds:_r2+45],ax |
mov word[ds:_rs+21],ax |
mov word[ds:_rs+46],ax |
; draw string |
cmp word [es:si+6],0x12 |
je .show_0x12 |
cmp word [es:si+6],0x13 |
je .show_0x13 |
movzx eax,word[es:si] |
cmp ax,-1 |
je .@@_end |
mov di,_rs+23 |
mov ecx,10 |
mov bl,4 |
call int2str |
movzx eax,word[es:si+2] |
inc di |
mov bl,4 |
call int2str |
movzx eax,word[es:si+8] |
inc di |
mov bl,2 |
call int2str |
cmp si, word [cursor_pos] |
jne .next |
;draw cursor |
mov word[ds:_rs+21],'>>' |
mov word[ds:_rs+46],'<<' |
.next: |
push si |
mov si,_rs |
.@@_sh: |
; add to the string pseudographics for scrollbar |
pop bx |
push bx |
mov byte [si+53], ' ' |
cmp bx, [scroll_start] |
jb @f |
cmp bx, [scroll_end] |
jae @f |
mov byte [si+53], 0xDB ; filled bar |
@@: |
push bx |
add bx, size_of_step |
cmp bx, [end_cursor] |
jnz @f |
mov byte [si+53], 31 ; 'down arrow' symbol |
@@: |
sub bx, [home_cursor] |
cmp bx, size_of_step*long_v_table |
jnz @f |
mov byte [si+53], 31 ; 'down arrow' symbol |
@@: |
pop bx |
cmp bx, [home_cursor] |
jnz @f |
mov byte [si+53], 30 ; 'up arrow' symbol |
@@: |
call printplain |
pop si |
add si,size_of_step |
dec bp |
jnz .@@_next_bit |
.@@_end: |
mov si,_bt |
call printplain |
ret |
.show_0x13: |
push si |
cmp si, word [cursor_pos] |
jne @f |
mov word[ds:_r1+21],'>>' |
mov word[ds:_r1+50],'<<' |
@@: |
mov si,_r1 |
jmp .@@_sh |
.show_0x12: |
push si |
cmp si, word [cursor_pos] |
jne @f |
mov word[ds:_r2+21],'>>' |
mov word[ds:_r2+45],'<<' |
@@: |
mov si,_r2 |
jmp .@@_sh |
;----------------------------------------------------------------------------- |
;Clear arrea of current video page (0xb800) |
clear_vmodes_table: |
pusha |
; draw frames |
push es |
push 0xb800 |
pop es |
mov di,1444 |
xor ax,ax |
mov ah, 1*16+15 |
mov cx,70 |
mov bp,12 |
.loop_start: |
rep stosw |
mov cx,70 |
add di,20 |
dec bp |
jns .loop_start |
pop es |
popa |
ret |
;----------------------------------------------------------------------------- |
set_vmode: |
push 0 ;0;x1000 |
pop es |
mov si,word [preboot_graph] ;[preboot_graph] |
mov cx,word [es:si+6] ; number of mode |
mov ax,word [es:si+0] ; resolution X |
mov bx,word [es:si+2] ; resolution Y |
mov word [es:0x900A],ax ; resolution X |
mov word [es:0x900C],bx ; resolution Y |
mov word [es:0x9008],cx ; number of mode |
cmp cx,0x12 |
je .mode0x12_0x13 |
cmp cx,0x13 |
je .mode0x12_0x13 |
cmp byte [s_vesa.ver],'2' |
jb .vesa12 |
; VESA 2 and Vesa 3 |
mov ax,0x4f01 |
and cx,0xfff |
mov di,mi;0xa000 |
int 0x10 |
; LFB |
mov eax,[es:mi.PhysBasePtr];di+0x28] |
mov [es:0x9018],eax |
; ---- vbe voodoo |
BytesPerLine equ 0x10 |
mov ax, [es:di+BytesPerLine] |
mov [es:0x9001], ax |
; BPP |
cmp [es:mi.BitsPerPixel],16 |
jne .l0 |
cmp [es:mi.GreenMaskSize],5 |
jne .l0 |
mov [es:mi.BitsPerPixel],15 |
.l0: |
mov al, byte [es:di+0x19] |
mov [es:0x9000], al |
jmp .exit |
.mode0x12_0x13: |
mov byte [es:0x9000], 32 |
or dword [es:0x9018], 0xFFFFFFFF; 0x800000 |
; VESA 1.2 PM BANK SWITCH ADDRESS |
.vesa12: |
mov ax,0x4f0A |
xor bx,bx |
int 0x10 |
xor eax,eax |
xor ebx,ebx |
mov ax,es |
shl eax,4 |
mov bx,di |
add eax,ebx |
movzx ebx,word[es:di] |
add eax,ebx |
push 0x0000 |
pop es |
mov [es:0x9014],eax |
.exit: |
ret |
; mov dword[es:0x9018],0x000A0000 |
; ret |
;============================================================================= |
;============================================================================= |
;============================================================================= |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/ru.inc |
---|
0,0 → 1,102 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
; Generated by RUFNT.EXE |
; By BadBugsKiller (C) |
; Modifyed by BadBugsKiller 12.01.2004 17:45 |
; Øðèôò óìåíüøåí â ðàçìåðå è òåïåðü ñîñòîèò èç 2-óõ ÷àñòåé, |
; ñîäåðæàùèõ òîëüêî ñèìâîëû ðóññêîãî àëôàâèòà. |
; ñèìâîëû â êîäèðîâêå ASCII (ÄÎÑ'îâñêàÿ), êîäîâàÿ ñòðàíèöà 866. |
RU_FNT1: |
db 0x00, 0x00, 0x1E, 0x36, 0x66, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x62, 0x60, 0x60, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFC, 0x66, 0x66, 0x66, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x66, 0x62, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0xFF, 0xC3, 0x81, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xDB, 0xDB, 0x5A, 0x5A, 0x7E, 0x7E, 0x5A, 0xDB, 0xDB, 0xDB, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x06, 0x3C, 0x06, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xCE, 0xDE, 0xF6, 0xE6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xCE, 0xDE, 0xF6, 0xE6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xE6, 0x66, 0x6C, 0x6C, 0x78, 0x78, 0x6C, 0x6C, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x1F, 0x36, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0xCF, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xEE, 0xFE, 0xFE, 0xD6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFC, 0x66, 0x66, 0x66, 0x66, 0x7C, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC0, 0xC0, 0xC0, 0xC0, 0xC2, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xFF, 0xDB, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7E, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x7E, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0x6C, 0x7C, 0x38, 0x38, 0x7C, 0x6C, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0xF8, 0xF0, 0xB0, 0x30, 0x3E, 0x33, 0x33, 0x33, 0x33, 0x7E, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xC3, 0xC3, 0xC3, 0xC3, 0xF3, 0xDB, 0xDB, 0xDB, 0xDB, 0xF3, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xF0, 0x60, 0x60, 0x60, 0x7C, 0x66, 0x66, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x26, 0x3E, 0x26, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xCE, 0xDB, 0xDB, 0xDB, 0xFB, 0xDB, 0xDB, 0xDB, 0xDB, 0xCE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x3F, 0x66, 0x66, 0x66, 0x3E, 0x3E, 0x66, 0x66, 0x66, 0xE7, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0C, 0x7C, 0xCC, 0xCC, 0xCC, 0x76, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x02, 0x06, 0x7C, 0xC0, 0xC0, 0xFC, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x66, 0x66, 0x7C, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x62, 0x62, 0x60, 0x60, 0x60, 0xF0, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0xFF, 0xC3, 0xC3, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xFE, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0x54, 0x7C, 0x54, 0xD6, 0xD6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x3C, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xCE, 0xD6, 0xE6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x38, 0xC6, 0xC6, 0xCE, 0xD6, 0xE6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xE6, 0x6C, 0x78, 0x78, 0x6C, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x36, 0x66, 0x66, 0x66, 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xEE, 0xFE, 0xFE, 0xD6, 0xD6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xFE, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x00, 0x00, 0x00, 0x00 |
RU_FNT2: |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xDC, 0x66, 0x66, 0x66, 0x66, 0x66, 0x7C, 0x60, 0x60, 0xF0, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xC0, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7E, 0x5A, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00 |
db 0x00, 0x00, 0x00, 0x3C, 0x18, 0x7E, 0xDB, 0xDB, 0xDB, 0xDB, 0xDB, 0x7E, 0x18, 0x18, 0x3C, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0x6C, 0x38, 0x38, 0x38, 0x6C, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0xFF, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xD6, 0xFE, 0x03, 0x03, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xB0, 0xB0, 0x3E, 0x33, 0x33, 0x7E, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xC6, 0xC6, 0xC6, 0xF6, 0xDE, 0xDE, 0xF6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x60, 0x60, 0x7C, 0x66, 0x66, 0xFC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0x06, 0x3E, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0xCE, 0xDB, 0xDB, 0xFB, 0xDB, 0xDB, 0xCE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xC6, 0xC6, 0x7E, 0x36, 0x66, 0xE7, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x00, 0xFE, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xFE, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x00, 0x7C, 0xC6, 0xC6, 0xFC, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xC8, 0xF8, 0xC8, 0xC0, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0xC6, 0xC0, 0xF8, 0xC0, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x66, 0x00, 0x3C, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3C, 0x00, 0x00, 0x00, 0x00 |
db 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x6C, 0x38, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7E, 0x06, 0x06, 0xC6, 0x7C, 0x00 |
db 0x00, 0x38, 0x6C, 0x6C, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0xEC, 0x6C, 0x3C, 0x1C, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0xCF, 0xCD, 0xEF, 0xEC, 0xFF, 0xDC, 0xDC, 0xCC, 0xCC, 0xCC, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0xC6, 0x7C, 0xC6, 0xC6, 0xC6, 0xC6, 0xC6, 0x7C, 0xC6, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00 |
db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/preboot.inc |
---|
0,0 → 1,38 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
display_modechg db 0 ; display mode change for text, yes/no (0 or 2) |
; |
; !! Important note !! |
; |
; Must be set to 2, to avoid two screenmode |
; changes within a very short period of time. |
display_atboot db 0 ; show boot screen messages ( 2-no ) |
preboot_graph dw 0 ; graph mode |
x_save dw 0 ; x |
y_save dw 0 ; y |
number_vm dw 0 ; |
;pixel_save dw 0 ; per to pixel |
preboot_gprobe db 0 ; probe vesa3 videomodes (1-no, 2-yes) |
preboot_vrrm db 0 ; use VRR_M (1-yes, 2- no) |
preboot_dma db 0 ; use DMA for access to HDD (1-always, 2-only for read, 3-never) |
preboot_device db 0 ; boot device |
; (1-floppy 2-harddisk 3-kernel restart 4-format ram disk) |
;!!!! 0 - autodetect !!!! |
preboot_blogesc = 0 ; start immediately after bootlog |
preboot_biosdisk db 0 ; use V86 to access disks through BIOS (1-yes, 2-no) |
if $>0x200 |
ERROR: prebooting parameters must fit in first sector!!! |
end if |
hdsysimage db 'KOLIBRI IMG' ; load from |
image_save db 'KOLIBRI IMG' ; save to |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/bootstr.inc |
---|
0,0 → 1,62 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
; boot data: common strings (for all languages) |
macro line_full_top { |
db 201 |
times 78 db 205 |
db 187 |
} |
macro line_full_bottom { |
db 200 |
times 78 db 205 |
db 188 |
} |
macro line_half { |
db 186,' ' |
times 76 db 0xc4 |
db ' ',186 |
} |
macro line_space { |
db 186 |
times 78 db 32 |
db 186 |
} |
d80x25_top: |
line_full_top |
cur_line_pos = 75 |
store byte ' ' at d80x25_top+cur_line_pos+1 |
rev_var = __REV__ |
while rev_var > 0 |
store byte rev_var mod 10 + '0' at d80x25_top+cur_line_pos |
cur_line_pos = cur_line_pos - 1 |
rev_var = rev_var / 10 |
end while |
store byte ' ' at d80x25_top+cur_line_pos |
store dword ' SVN' at d80x25_top+cur_line_pos-4 |
space_msg: line_space |
verstr: |
; line_space |
; version string |
db 186,32 |
repeat 78 |
load a byte from version+%-1 |
if a = 13 |
break |
end if |
db a |
end repeat |
repeat 78 - ($-verstr) |
db ' ' |
end repeat |
db 32,186 |
line_half |
d80x25_top_num = 4 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/et.inc |
---|
0,0 → 1,16 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
; Full ASCII code font |
; only õ and ä added |
; Kaitz |
ET_FNT: |
fontfile file "ETFONT.FNT" |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/shutdown.inc |
---|
0,0 → 1,209 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;; Shutdown for Menuet ;; |
;; ;; |
;; Distributed under General Public License ;; |
;; See file COPYING for details. ;; |
;; Copyright 2003 Ville Turjanmaa ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
align 4 |
pr_mode_exit: |
; setup stack |
mov ax, 0x3000 |
mov ss, ax |
mov esp, 0x0EC00 |
; setup ds |
push cs |
pop ds |
lidt [old_ints_h] |
;remap IRQs |
mov al,0x11 |
out 0x20,al |
call rdelay |
out 0xA0,al |
call rdelay |
mov al,0x08 |
out 0x21,al |
call rdelay |
mov al,0x70 |
out 0xA1,al |
call rdelay |
mov al,0x04 |
out 0x21,al |
call rdelay |
mov al,0x02 |
out 0xA1,al |
call rdelay |
mov al,0x01 |
out 0x21,al |
call rdelay |
out 0xA1,al |
call rdelay |
mov al,0xB8 |
out 0x21,al |
call rdelay |
mov al,0xBD |
out 0xA1,al |
sti |
temp_3456: |
xor ax,ax |
mov es,ax |
mov al,byte [es:0x9030] |
cmp al,1 |
jl nbw |
cmp al,4 |
jle nbw32 |
nbw: |
in al,0x60 |
cmp al,6 |
jae nbw |
mov bl,al |
nbw2: |
in al,0x60 |
cmp al,bl |
je nbw2 |
cmp al,240 ;ax,240 |
jne nbw31 |
mov al,bl |
dec ax |
jmp nbw32 |
nbw31: |
add bl,128 |
cmp al,bl |
jne nbw |
sub al,129 |
nbw32: |
dec ax |
dec ax ; 2 = power off |
jnz no_apm_off |
call APM_PowerOff |
jmp $ |
no_apm_off: |
dec ax ; 3 = reboot |
jnz restart_kernel ; 4 = restart kernel |
push 0x40 |
pop ds |
mov word[0x0072],0x1234 |
jmp 0xF000:0xFFF0 |
rdelay: |
ret |
APM_PowerOff: |
mov ax, 5304h |
xor bx, bx |
int 15h |
;!!!!!!!!!!!!!!!!!!!!!!!! |
mov ax,0x5300 |
xor bx,bx |
int 0x15 |
push ax |
mov ax,0x5301 |
xor bx,bx |
int 0x15 |
mov ax,0x5308 |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x530E |
xor bx,bx |
pop cx |
int 0x15 |
mov ax,0x530D |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x530F |
mov bx,1 |
mov cx,bx |
int 0x15 |
mov ax,0x5307 |
mov bx,1 |
mov cx,3 |
int 0x15 |
;!!!!!!!!!!!!!!!!!!!!!!!! |
ret |
restart_kernel: |
mov ax,0x0003 ; set text mode for screen |
int 0x10 |
jmp 0x4000:0000 |
restart_kernel_4000: |
cli |
push ds |
pop es |
mov cx, 0x8000 |
push cx |
push 0x7000 |
pop ds |
xor si, si |
xor di, di |
rep movsw |
pop cx |
mov ds, cx |
push 0x2000 |
pop es |
rep movsw |
push 0x9000 |
pop ds |
push 0x3000 |
pop es |
mov cx, 0xE000/2 |
rep movsw |
wbinvd ; write and invalidate cache |
mov al, 00110100b |
out 43h, al |
jcxz $+2 |
mov al, 0xFF |
out 40h, al |
jcxz $+2 |
out 40h, al |
jcxz $+2 |
sti |
; (hint by Black_mirror) |
; We must read data from keyboard port, |
; because there may be situation when previous keyboard interrupt is lost |
; (due to return to real mode and IRQ reprogramming) |
; and next interrupt will not be generated (as keyboard waits for handling) |
in al, 0x60 |
; bootloader interface |
push 0x1000 |
pop ds |
mov si, kernel_restart_bootblock |
mov ax, 'KL' |
jmp 0x1000:0000 |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/rdload.inc |
---|
0,0 → 1,125 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
$Revision$ |
; READ RAMDISK IMAGE FROM HD |
cmp [boot_dev+OS_BASE+0x10000],1 |
jne no_sys_on_hd |
test [DRIVE_DATA+1],byte 0x40 |
jz position_2 |
mov [hdbase],0x1f0 |
mov [hdid],0x0 |
mov [hdpos],1 |
mov [fat32part],0 |
position_1_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+2] |
cmp [fat32part],eax |
jle position_1_1 |
position_2: |
test [DRIVE_DATA+1],byte 0x10 |
jz position_3 |
mov [hdbase],0x1f0 |
mov [hdid],0x10 |
mov [hdpos],2 |
mov [fat32part],0 |
position_2_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+3] |
cmp eax,[fat32part] |
jle position_2_1 |
position_3: |
test [DRIVE_DATA+1],byte 0x4 |
jz position_4 |
mov [hdbase],0x170 |
mov [hdid],0x0 |
mov [hdpos],3 |
mov [fat32part],0 |
position_3_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+4] |
cmp eax,[fat32part] |
jle position_3_1 |
position_4: |
test [DRIVE_DATA+1],byte 0x1 |
jz no_sys_on_hd |
mov [hdbase],0x170 |
mov [hdid],0x10 |
mov [hdpos],4 |
mov [fat32part],0 |
position_4_1: |
inc [fat32part] |
call search_and_read_image |
cmp [image_retrieved],1 |
je yes_sys_on_hd |
movzx eax,byte [DRIVE_DATA+5] |
cmp eax,[fat32part] |
jle position_4_1 |
jmp yes_sys_on_hd |
search_and_read_image: |
call set_FAT32_variables |
mov edx, bootpath |
call read_image |
test eax, eax |
jz image_present |
mov edx, bootpath2 |
call read_image |
test eax, eax |
jz image_present |
ret |
image_present: |
mov [image_retrieved],1 |
ret |
read_image: |
mov eax, hdsysimage+OS_BASE+0x10000 |
mov ebx, 1474560/512 |
mov ecx, RAMDISK |
mov esi, 0 |
mov edi, 12 |
call file_read |
ret |
image_retrieved db 0 |
counter_of_partitions db 0 |
no_sys_on_hd: |
; test_to_format_ram_disk (need if not using ram disk) |
cmp [boot_dev+OS_BASE+0x10000],3 |
jne not_format_ram_disk |
; format_ram_disk |
mov edi, RAMDISK |
mov ecx, 0x1080 |
xor eax,eax |
@@: |
stosd |
loop @b |
mov ecx, 0x58F7F |
mov eax,0xF6F6F6F6 |
@@: |
stosd |
loop @b |
mov [RAMDISK+0x200],dword 0xFFFFF0 ; fat table |
mov [RAMDISK+0x4200],dword 0xFFFFF0 |
not_format_ram_disk: |
yes_sys_on_hd: |
Property changes: |
Added: svn:keywords |
+Rev |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/ETFONT.FNT |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/kernel/branches/Kolibri-acpi/boot/. |
---|
Property changes: |
Added: svn:ignore |
+*.mnt |
+lang.inc |
+*.bat |
+out.txt |
+scin* |
+*.obj |