1,6 → 1,6 |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Copyright (C) KolibriOS team 2004-2007. All rights reserved. ;; |
;; Copyright (C) KolibriOS team 2004-2010. All rights reserved. ;; |
;; Distributed under terms of the GNU General Public License ;; |
;; ;; |
;; ;; |
32,63 → 32,114 |
;*************************************************************************** |
;mmio_pci_addr equ 0x400 ; set actual PCI address here to activate user-MMIO |
|
iglobal |
align 4 |
f62call: |
dd pci_api.0 |
dd pci_api.1 |
dd pci_api.2 |
dd pci_api.not_support ;3 |
dd pci_read_reg ;4 byte |
dd pci_read_reg ;5 word |
dd pci_read_reg ;6 dword |
dd pci_api.not_support ;7 |
dd pci_write_reg ;8 byte |
dd pci_write_reg ;9 word |
dd pci_write_reg ;10 dword |
if defined mmio_pci_addr |
dd pci_mmio_init ;11 |
dd pci_mmio_map ;12 |
dd pci_mmio_unmap ;13 |
end if |
f62_rcall: |
dd pci_read_reg.0 ;4 byte |
dd pci_read_reg.1 ;5 word |
dd pci_read_reg.2 ;6 dword |
f62_rcall2: |
dd pci_read_reg_2.0 ;4 byte |
dd pci_read_reg_2.1 ;5 word |
dd pci_read_reg_2.2 ;6 dword |
f62_wcall: |
dd pci_write_reg.0 ;4 byte |
dd pci_write_reg.1 ;5 word |
dd pci_write_reg.2 ;6 dword |
f62_wcall2: |
dd pci_write_reg_2.0 ;4 byte |
dd pci_write_reg_2.1 ;5 word |
dd pci_write_reg_2.2 ;6 dword |
endg |
|
|
align 4 |
|
pci_api: |
|
movzx eax,bl |
cmp [pci_access_enabled],1 |
jne no_pci_access_for_applications |
jne .no_pci_access_for_applications |
|
or al,al |
jnz pci_fn_1 |
if defined mmio_pci_addr |
cmp eax, 13 |
jb .not_support |
else |
cmp eax, 10 |
jb .not_support |
end if |
call dword [f62call+eax*4] |
mov dword [esp+32],eax |
ret |
|
|
|
; or al,al |
; jnz pci_fn_1 |
; PCI function 0: get pci version (AH.AL) |
.0: |
movzx eax,word [BOOT_VAR+0x9022] |
ret |
|
pci_fn_1: |
cmp al,1 |
jnz pci_fn_2 |
;pci_fn_1: |
; cmp al,1 |
; jnz pci_fn_2 |
|
; PCI function 1: get last bus in AL |
mov al,[BOOT_VAR+0x9021] |
.1: |
movzx eax, byte [BOOT_VAR+0x9021] |
ret |
|
pci_fn_2: |
cmp al,2 |
jne pci_fn_3 |
;pci_fn_2: |
; cmp al,2 |
; jne pci_fn_3 |
; PCI function 2: get pci access mechanism |
mov al,[BOOT_VAR+0x9020] |
.2: |
movzx eax, byte [BOOT_VAR+0x9020] |
ret |
pci_fn_3: |
;pci_fn_3: |
|
cmp al,4 |
jz pci_read_reg ;byte |
cmp al,5 |
jz pci_read_reg ;word |
cmp al,6 |
jz pci_read_reg ;dword |
; cmp al,4 |
; jz pci_read_reg ;byte |
; cmp al,5 |
; jz pci_read_reg ;word |
; cmp al,6 |
; jz pci_read_reg ;dword |
|
cmp al,8 |
jz pci_write_reg ;byte |
cmp al,9 |
jz pci_write_reg ;word |
cmp al,10 |
jz pci_write_reg ;dword |
; cmp al,8 |
; jz pci_write_reg ;byte |
; cmp al,9 |
; jz pci_write_reg ;word |
; cmp al,10 |
; jz pci_write_reg ;dword |
|
if defined mmio_pci_addr |
cmp al,11 ; user-level MMIO functions |
jz pci_mmio_init |
cmp al,12 |
jz pci_mmio_map |
cmp al,13 |
jz pci_mmio_unmap |
end if |
;if defined mmio_pci_addr |
; cmp al,11 ; user-level MMIO functions |
; jz pci_mmio_init |
; cmp al,12 |
; jz pci_mmio_map |
; cmp al,13 |
; jz pci_mmio_unmap |
;end if |
|
no_pci_access_for_applications: |
|
.not_support: |
.no_pci_access_for_applications: |
or eax,-1 |
|
ret |
|
;*************************************************************************** |
97,20 → 148,20 |
; |
; Description |
; creates a command dword for use with the PCI bus |
; bus # in ah |
; device+func in bh (dddddfff) |
; register in bl |
; bus # in bh;ah |
; device+func in ch;bh (dddddfff) |
; register in cl;bl |
; |
; command dword returned in eax ( 10000000 bbbbbbbb dddddfff rrrrrr00 ) |
; command dword returned in ebx;eax ( 10000000 bbbbbbbb dddddfff rrrrrr00 ) |
;*************************************************************************** |
|
align 4 |
|
pci_make_config_cmd: |
shl eax,8 ; move bus to bits 16-23 |
mov ax,bx ; combine all |
and eax,0xffffff |
or eax,0x80000000 |
shl ebx,8;eax,8 ; move bus to bits 16-23 |
mov bx,cx;ax,bx ; combine all |
and ebx,0xffffff;eax,0xffffff |
or ebx,0x80000000;eax,0x80000000 |
ret |
|
;*************************************************************************** |
131,12 → 182,12 |
je pci_read_reg_2 |
|
; mechanism 1 |
push esi ; save register size into ESI |
mov esi,eax |
; push esi ; save register size into ESI |
mov esi,ebx;eax |
and esi,3 |
|
call pci_make_config_cmd |
mov ebx,eax |
mov eax,ebx;ebx,eax |
; get current state |
mov dx,0xcf8 |
in eax, dx |
150,24 → 201,25 |
and bl,3 |
or dl,bl ; add to port address first 2 bits of register address |
|
or esi,esi |
jz pci_read_byte1 |
cmp esi,1 |
jz pci_read_word1 |
cmp esi,2 |
jz pci_read_dword1 |
jmp pci_fin_read1 |
; or esi,esi |
; jz pci_read_byte1 |
; cmp esi,1 |
; jz pci_read_word1 |
; cmp esi,2 |
; jz pci_read_dword1 |
; jmp pci_fin_read1 |
jmp dword [f62_rcall+esi*4] |
|
pci_read_byte1: |
.0: |
in al,dx |
jmp pci_fin_read1 |
pci_read_word1: |
jmp .pci_fin_read1 |
.1: |
in ax,dx |
jmp pci_fin_read1 |
pci_read_dword1: |
jmp .pci_fin_read1 |
.2: |
in eax,dx |
jmp pci_fin_read1 |
pci_fin_read1: |
; jmp pci_fin_read1 |
.pci_fin_read1: |
; restore configuration control |
xchg eax,[esp] |
mov dx,0xcf8 |
174,18 → 226,19 |
out dx,eax |
|
pop eax |
pop esi |
;pop esi |
ret |
pci_read_reg_2: |
|
test bh,128 ;mech#2 only supports 16 devices per bus |
jnz pci_read_reg_err |
test ch,128;bh,128 ;mech#2 only supports 16 devices per bus |
jnz pci_api.not_support |
|
push esi ; save register size into ESI |
mov esi,eax |
; push esi ; save register size into ESI |
mov esi,ebx;eax |
and esi,3 |
|
push eax |
push ebx;eax |
mov eax,ebx |
;store current state of config space |
mov dx,0xcf8 |
in al,dx |
202,29 → 255,31 |
mov al,0x80 |
out dx,al |
; compute addr |
shr bh,3 ; func is ignored in mechanism 2 |
or bh,0xc0 |
mov dx,bx |
shr ch,3;bh,3 ; func is ignored in mechanism 2 |
or ch,0xc0;bh,0xc0 |
mov dx,cx;bx |
|
or esi,esi |
jz pci_read_byte2 |
cmp esi,1 |
jz pci_read_word2 |
cmp esi,2 |
jz pci_read_dword2 |
jmp pci_fin_read2 |
; or esi,esi |
; jz pci_read_byte2 |
; cmp esi,1 |
; jz pci_read_word2 |
; cmp esi,2 |
; jz pci_read_dword2 |
; jmp pci_fin_read2 |
jmp dword [f62_rcall2+esi*4] |
|
pci_read_byte2: |
.0: |
in al,dx |
jmp pci_fin_read2 |
pci_read_word2: |
jmp .pci_fin_read2 |
.1: |
in ax,dx |
jmp pci_fin_read2 |
pci_read_dword2: |
jmp .pci_fin_read2 |
.2: |
in eax,dx |
; jmp pci_fin_read2 |
pci_fin_read2: |
|
.pci_fin_read2: |
|
; restore configuration space |
xchg eax,[esp] |
mov dx,0xcfa |
234,13 → 289,12 |
out dx,al |
|
pop eax |
pop esi |
; pop esi |
ret |
|
pci_read_reg_err: |
xor eax,eax |
dec eax |
ret |
;pci_read_reg_err: |
; or dword [esp+32],-1 |
; ret |
|
|
;*************************************************************************** |
262,12 → 316,13 |
je pci_write_reg_2 |
|
; mechanism 1 |
push esi ; save register size into ESI |
mov esi,eax |
and esi,3 |
; push esi ; save register size into ESI |
mov esi,ebx;eax |
and esi,3 ;not need |
|
call pci_make_config_cmd |
mov ebx,eax |
mov eax,ebx;ebx,eax |
mov ecx,edx ;cross registers |
; get current state into ecx |
mov dx,0xcf8 |
in eax, dx |
282,24 → 337,23 |
or dl,bl |
mov eax,ecx |
|
or esi,esi |
jz pci_write_byte1 |
cmp esi,1 |
jz pci_write_word1 |
cmp esi,2 |
jz pci_write_dword1 |
jmp pci_fin_write1 |
|
pci_write_byte1: |
; or esi,esi |
; jz pci_write_byte1 |
; cmp esi,1 |
; jz pci_write_word1 |
; cmp esi,2 |
; jz pci_write_dword1 |
; jmp pci_fin_write1 |
jmp dword [f62_wcall+esi*4] |
.0: |
out dx,al |
jmp pci_fin_write1 |
pci_write_word1: |
jmp .pci_fin_write1 |
.1: |
out dx,ax |
jmp pci_fin_write1 |
pci_write_dword1: |
jmp .pci_fin_write1 |
.2: |
out dx,eax |
jmp pci_fin_write1 |
pci_fin_write1: |
.pci_fin_write1: |
|
; restore configuration control |
pop eax |
307,20 → 361,20 |
out dx,eax |
|
xor eax,eax |
pop esi |
|
;pop esi |
ret |
pci_write_reg_2: |
|
test bh,128 ;mech#2 only supports 16 devices per bus |
jnz pci_write_reg_err |
test ch,128;bh,128 ;mech#2 only supports 16 devices per bus |
jnz pci_api.not_support |
|
|
push esi ; save register size into ESI |
; push esi ; save register size into ESI |
mov esi,eax |
and esi,3 |
and esi,3 ;not need |
|
push eax |
mov ecx,edx ;cross registers |
;store current state of config space |
mov dx,0xcf8 |
in al,dx |
342,24 → 396,23 |
; write register |
mov eax,ecx |
|
or esi,esi |
jz pci_write_byte2 |
cmp esi,1 |
jz pci_write_word2 |
cmp esi,2 |
jz pci_write_dword2 |
jmp pci_fin_write2 |
|
pci_write_byte2: |
; or esi,esi |
; jz pci_write_byte2 |
; cmp esi,1 |
; jz pci_write_word2 |
; cmp esi,2 |
; jz pci_write_dword2 |
; jmp pci_fin_write2 |
jmp dword [f62_wcall2+esi*4] |
.0: |
out dx,al |
jmp pci_fin_write2 |
pci_write_word2: |
jmp .pci_fin_write2 |
.1: |
out dx,ax |
jmp pci_fin_write2 |
pci_write_dword2: |
jmp .pci_fin_write2 |
.2: |
out dx,eax |
jmp pci_fin_write2 |
pci_fin_write2: |
.pci_fin_write2: |
; restore configuration space |
pop eax |
mov dx,0xcfa |
369,13 → 422,13 |
out dx,al |
|
xor eax,eax |
pop esi |
;pop esi |
ret |
|
pci_write_reg_err: |
xor eax,eax |
dec eax |
ret |
;pci_write_reg_err: |
; xor eax,eax |
; dec eax |
; ret |
|
if defined mmio_pci_addr ; must be set above |
;*************************************************************************** |
383,7 → 436,7 |
; pci_mmio_init |
; |
; Description |
; IN: bx = device's PCI bus address (bbbbbbbbdddddfff) |
; IN: cx = device's PCI bus address (bbbbbbbbdddddfff) |
; Returns eax = user heap space available (bytes) |
; Error codes |
; eax = -1 : PCI user access blocked, |
391,7 → 444,7 |
; eax = -3 : user heap initialization failure |
;*************************************************************************** |
pci_mmio_init: |
cmp bx, mmio_pci_addr |
cmp cx, mmio_pci_addr |
jz @f |
mov eax,-2 |
ret |
431,6 → 484,11 |
;*************************************************************************** |
|
pci_mmio_map: |
;cross |
mov eax,ebx |
mov ebx,ecx |
mov ecx,edx |
;;;;;;;;;;;;;;;;;;; |
and edx,0x0ffff |
cmp ah,6 |
jc .bar_0_5 |
508,7 → 566,7 |
;*************************************************************************** |
|
pci_mmio_unmap: |
stdcall user_free, ebx |
stdcall user_free, ecx;ebx |
ret |
|
end if |