/drivers/devman/acpica/tools/acpiexec/Makefile |
---|
0,0 → 1,152 |
PROG= acpiexec |
SRCS= aetables.c aehandlers.c aeexec.c aemain.c \ |
../../common/getopt.c \ |
../../debugger/dbcmds.c \ |
../../debugger/dbdisply.c \ |
../../debugger/dbexec.c \ |
../../debugger/dbfileio.c \ |
../../debugger/dbhistry.c \ |
../../debugger/dbinput.c \ |
../../debugger/dbstats.c \ |
../../debugger/dbutils.c \ |
../../debugger/dbxface.c \ |
../../disassembler/dmbuffer.c \ |
../../disassembler/dmnames.c \ |
../../disassembler/dmobject.c \ |
../../disassembler/dmopcode.c \ |
../../disassembler/dmresrc.c \ |
../../disassembler/dmresrcl.c \ |
../../disassembler/dmresrcs.c \ |
../../disassembler/dmutils.c \ |
../../disassembler/dmwalk.c \ |
../../events/evevent.c \ |
../../events/evgpe.c \ |
../../events/evgpeblk.c \ |
../../events/evgpeinit.c \ |
../../events/evgpeutil.c \ |
../../events/evmisc.c \ |
../../events/evregion.c \ |
../../events/evrgnini.c \ |
../../events/evsci.c \ |
../../events/evxface.c \ |
../../events/evxfevnt.c \ |
../../events/evxfregn.c \ |
../../hardware/hwacpi.c \ |
../../hardware/hwgpe.c \ |
../../hardware/hwregs.c \ |
../../hardware/hwsleep.c \ |
../../hardware/hwvalid.c \ |
../../hardware/hwxface.c \ |
../../dispatcher/dsfield.c \ |
../../dispatcher/dsinit.c \ |
../../dispatcher/dsmethod.c \ |
../../dispatcher/dsmthdat.c \ |
../../dispatcher/dsobject.c \ |
../../dispatcher/dsopcode.c \ |
../../dispatcher/dsutils.c \ |
../../dispatcher/dswexec.c \ |
../../dispatcher/dswload.c \ |
../../dispatcher/dswscope.c \ |
../../dispatcher/dswstate.c \ |
../../executer/exconfig.c \ |
../../executer/exconvrt.c \ |
../../executer/excreate.c \ |
../../executer/exdebug.c \ |
../../executer/exdump.c \ |
../../executer/exfield.c \ |
../../executer/exfldio.c \ |
../../executer/exmisc.c \ |
../../executer/exmutex.c \ |
../../executer/exnames.c \ |
../../executer/exoparg1.c \ |
../../executer/exoparg2.c \ |
../../executer/exoparg3.c \ |
../../executer/exoparg6.c \ |
../../executer/exprep.c \ |
../../executer/exregion.c \ |
../../executer/exresnte.c \ |
../../executer/exresolv.c \ |
../../executer/exresop.c \ |
../../executer/exstore.c \ |
../../executer/exstoren.c \ |
../../executer/exstorob.c \ |
../../executer/exsystem.c \ |
../../executer/exutils.c \ |
../../parser/psargs.c \ |
../../parser/psloop.c \ |
../../parser/psopcode.c \ |
../../parser/psparse.c \ |
../../parser/psscope.c \ |
../../parser/pstree.c \ |
../../parser/psutils.c \ |
../../parser/pswalk.c \ |
../../parser/psxface.c \ |
../../namespace/nsaccess.c \ |
../../namespace/nsalloc.c \ |
../../namespace/nsdump.c \ |
../../namespace/nsdumpdv.c \ |
../../namespace/nseval.c \ |
../../namespace/nsinit.c \ |
../../namespace/nsload.c \ |
../../namespace/nsnames.c \ |
../../namespace/nsobject.c \ |
../../namespace/nsparse.c \ |
../../namespace/nspredef.c \ |
../../namespace/nsrepair.c \ |
../../namespace/nsrepair2.c \ |
../../namespace/nssearch.c \ |
../../namespace/nsutils.c \ |
../../namespace/nswalk.c \ |
../../namespace/nsxfeval.c \ |
../../namespace/nsxfname.c \ |
../../namespace/nsxfobj.c \ |
../../resources/rsaddr.c \ |
../../resources/rscalc.c \ |
../../resources/rscreate.c \ |
../../resources/rsdump.c \ |
../../resources/rsio.c \ |
../../resources/rsinfo.c \ |
../../resources/rsirq.c \ |
../../resources/rslist.c \ |
../../resources/rsmemory.c \ |
../../resources/rsmisc.c \ |
../../resources/rsutils.c \ |
../../resources/rsxface.c \ |
../../tables/tbfadt.c \ |
../../tables/tbfind.c \ |
../../tables/tbinstal.c \ |
../../tables/tbutils.c \ |
../../tables/tbxface.c \ |
../../tables/tbxfroot.c \ |
../../utilities/utalloc.c \ |
../../utilities/utcache.c \ |
../../utilities/utcopy.c \ |
../../utilities/utdebug.c \ |
../../utilities/utdelete.c \ |
../../utilities/uteval.c \ |
../../utilities/utglobal.c \ |
../../utilities/utids.c \ |
../../utilities/utinit.c \ |
../../utilities/utlock.c \ |
../../utilities/utmath.c \ |
../../utilities/utmisc.c \ |
../../utilities/utmutex.c \ |
../../utilities/utobject.c \ |
../../utilities/utresrc.c \ |
../../utilities/utstate.c \ |
../../utilities/uttrack.c \ |
../../utilities/utxface.c \ |
../../osunixxf.c |
CFLAGS+= -Wall -g -D_LINUX -DNDEBUG -D_CONSOLE -DACPI_EXEC_APP -D_MULTI_THREADED -Wstrict-prototypes -I../../include |
acpiexec : $(patsubst %.c,%.o, $(SRCS)) |
$(CC) $(LDFLAGS) $(patsubst %.c,%.o, $(SRCS)) -lrt -lpthread -o $(PROG) |
CLEANFILES= $(PROG) |
clean : |
rm -f $(CLEANFILES) $(patsubst %.c,%.o, $(SRCS)) |
/drivers/devman/acpica/tools/acpiexec/aecommon.h |
---|
0,0 → 1,244 |
/****************************************************************************** |
* |
* Module Name: aecommon - common include for the AcpiExec utility |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#ifndef _AECOMMON |
#define _AECOMMON |
#ifdef _MSC_VER /* disable some level-4 warnings */ |
#pragma warning(disable:4100) /* warning C4100: unreferenced formal parameter */ |
#endif |
#include <stdio.h> |
#include <stdlib.h> |
#include <string.h> |
#include <signal.h> |
#include "acpi.h" |
#include "accommon.h" |
#include "acparser.h" |
#include "amlcode.h" |
#include "acnamesp.h" |
#include "acdebug.h" |
#include "actables.h" |
#include "acinterp.h" |
#include "acapps.h" |
extern FILE *AcpiGbl_DebugFile; |
extern BOOLEAN AcpiGbl_IgnoreErrors; |
extern UINT8 AcpiGbl_RegionFillValue; |
typedef struct ae_table_desc |
{ |
ACPI_TABLE_HEADER *Table; |
struct ae_table_desc *Next; |
} AE_TABLE_DESC; |
/* |
* Debug Regions |
*/ |
typedef struct ae_region |
{ |
ACPI_PHYSICAL_ADDRESS Address; |
UINT32 Length; |
void *Buffer; |
void *NextRegion; |
UINT8 SpaceId; |
} AE_REGION; |
typedef struct ae_debug_regions |
{ |
UINT32 NumberOfRegions; |
AE_REGION *RegionList; |
} AE_DEBUG_REGIONS; |
#define TEST_OUTPUT_LEVEL(lvl) if ((lvl) & OutputLevel) |
#define OSD_PRINT(lvl,fp) TEST_OUTPUT_LEVEL(lvl) {\ |
AcpiOsPrintf PARAM_LIST(fp);} |
void __cdecl |
AeCtrlCHandler ( |
int Sig); |
ACPI_STATUS |
AeBuildLocalTables ( |
UINT32 TableCount, |
AE_TABLE_DESC *TableList); |
ACPI_STATUS |
AeInstallTables ( |
void); |
void |
AeDumpNamespace ( |
void); |
void |
AeDumpObject ( |
char *MethodName, |
ACPI_BUFFER *ReturnObj); |
void |
AeDumpBuffer ( |
UINT32 Address); |
void |
AeExecute ( |
char *Name); |
void |
AeSetScope ( |
char *Name); |
void |
AeCloseDebugFile ( |
void); |
void |
AeOpenDebugFile ( |
char *Name); |
ACPI_STATUS |
AeDisplayAllMethods ( |
UINT32 DisplayCount); |
ACPI_STATUS |
AeInstallHandlers ( |
void); |
void |
AeMiscellaneousTests ( |
void); |
ACPI_STATUS |
AeRegionHandler ( |
UINT32 Function, |
ACPI_PHYSICAL_ADDRESS Address, |
UINT32 BitWidth, |
UINT64 *Value, |
void *HandlerContext, |
void *RegionContext); |
UINT32 |
AeGpeHandler ( |
void *Context); |
#endif /* _AECOMMON */ |
/drivers/devman/acpica/tools/acpiexec/aeexec.c |
---|
0,0 → 1,614 |
/****************************************************************************** |
* |
* Module Name: aeexec - Support routines for AcpiExec utility |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#include "aecommon.h" |
#define _COMPONENT ACPI_TOOLS |
ACPI_MODULE_NAME ("aeexec") |
/* Local prototypes */ |
ACPI_STATUS |
AeSetupConfiguration ( |
void *RegionAddr); |
void |
AfInstallGpeBlock ( |
void); |
void |
AeTestBufferArgument ( |
void); |
void |
AeTestPackageArgument ( |
void); |
ACPI_STATUS |
AeGetDevices ( |
ACPI_HANDLE ObjHandle, |
UINT32 NestingLevel, |
void *Context, |
void **ReturnValue); |
ACPI_STATUS |
ExecuteOSI ( |
char *OsiString, |
UINT32 ExpectedResult); |
void |
AeHardwareInterfaces ( |
void); |
void |
AeGenericRegisters ( |
void); |
extern unsigned char Ssdt3Code[]; |
/****************************************************************************** |
* |
* FUNCTION: AeSetupConfiguration |
* |
* PARAMETERS: RegionAddr - Address for an ACPI table to be loaded |
* dynamically. Test purposes only. |
* |
* RETURN: Status |
* |
* DESCRIPTION: Call AML _CFG configuration control method |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeSetupConfiguration ( |
void *RegionAddr) |
{ |
ACPI_STATUS Status; |
ACPI_OBJECT_LIST ArgList; |
ACPI_OBJECT Arg[3]; |
/* |
* Invoke _CFG method if present |
*/ |
ArgList.Count = 1; |
ArgList.Pointer = Arg; |
Arg[0].Type = ACPI_TYPE_INTEGER; |
Arg[0].Integer.Value = ACPI_TO_INTEGER (RegionAddr); |
Status = AcpiEvaluateObject (NULL, "\\_CFG", &ArgList, NULL); |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AfInstallGpeBlock |
* |
* PARAMETERS: None |
* |
* RETURN: None |
* |
* DESCRIPTION: Test GPE block device initialization. Requires test ASL with |
* A \GPE2 device. |
* |
*****************************************************************************/ |
void |
AfInstallGpeBlock ( |
void) |
{ |
ACPI_STATUS Status; |
ACPI_HANDLE Handle; |
ACPI_HANDLE Handle2 = NULL; |
ACPI_HANDLE Handle3 = NULL; |
ACPI_GENERIC_ADDRESS BlockAddress; |
ACPI_HANDLE GpeDevice; |
Status = AcpiGetHandle (NULL, "\\_GPE", &Handle); |
if (ACPI_FAILURE (Status)) |
{ |
return; |
} |
ACPI_MEMSET (&BlockAddress, 0, sizeof (ACPI_GENERIC_ADDRESS)); |
BlockAddress.SpaceId = ACPI_ADR_SPACE_SYSTEM_MEMORY; |
BlockAddress.Address = 0x76540000; |
Status = AcpiGetHandle (NULL, "\\GPE2", &Handle2); |
if (ACPI_SUCCESS (Status)) |
{ |
Status = AcpiInstallGpeBlock (Handle2, &BlockAddress, 7, 8); |
AcpiInstallGpeHandler (Handle2, 8, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (Handle2, 8, ACPI_GPE_TYPE_RUNTIME); |
Status = AcpiGetGpeDevice (0x30, &GpeDevice); |
Status = AcpiGetGpeDevice (0x42, &GpeDevice); |
Status = AcpiGetGpeDevice (AcpiCurrentGpeCount-1, &GpeDevice); |
Status = AcpiGetGpeDevice (AcpiCurrentGpeCount, &GpeDevice); |
AcpiRemoveGpeHandler (Handle2, 8, AeGpeHandler); |
} |
Status = AcpiGetHandle (NULL, "\\GPE3", &Handle3); |
if (ACPI_SUCCESS (Status)) |
{ |
Status = AcpiInstallGpeBlock (Handle3, &BlockAddress, 8, 11); |
} |
} |
/* Test using a Buffer object as a method argument */ |
void |
AeTestBufferArgument ( |
void) |
{ |
ACPI_STATUS Status; |
ACPI_OBJECT_LIST Params; |
ACPI_OBJECT BufArg; |
UINT8 Buffer[] = { |
0,0,0,0, |
4,0,0,0, |
1,2,3,4}; |
BufArg.Type = ACPI_TYPE_BUFFER; |
BufArg.Buffer.Length = 12; |
BufArg.Buffer.Pointer = Buffer; |
Params.Count = 1; |
Params.Pointer = &BufArg; |
Status = AcpiEvaluateObject (NULL, "\\BUF", &Params, NULL); |
} |
ACPI_OBJECT PkgArg; |
ACPI_OBJECT PkgElements[5]; |
ACPI_OBJECT Pkg2Elements[5]; |
ACPI_OBJECT_LIST Params; |
/* |
* Test using a Package object as an method argument |
*/ |
void |
AeTestPackageArgument ( |
void) |
{ |
ACPI_STATUS Status; |
/* Main package */ |
PkgArg.Type = ACPI_TYPE_PACKAGE; |
PkgArg.Package.Count = 4; |
PkgArg.Package.Elements = PkgElements; |
/* Main package elements */ |
PkgElements[0].Type = ACPI_TYPE_INTEGER; |
PkgElements[0].Integer.Value = 0x22228888; |
PkgElements[1].Type = ACPI_TYPE_STRING; |
PkgElements[1].String.Length = sizeof ("Top-level package"); |
PkgElements[1].String.Pointer = "Top-level package"; |
PkgElements[2].Type = ACPI_TYPE_BUFFER; |
PkgElements[2].Buffer.Length = sizeof ("XXXX"); |
PkgElements[2].Buffer.Pointer = (UINT8 *) "XXXX"; |
PkgElements[3].Type = ACPI_TYPE_PACKAGE; |
PkgElements[3].Package.Count = 2; |
PkgElements[3].Package.Elements = Pkg2Elements; |
/* Sub-package elements */ |
Pkg2Elements[0].Type = ACPI_TYPE_INTEGER; |
Pkg2Elements[0].Integer.Value = 0xAAAABBBB; |
Pkg2Elements[1].Type = ACPI_TYPE_STRING; |
Pkg2Elements[1].String.Length = sizeof ("Nested Package"); |
Pkg2Elements[1].String.Pointer = "Nested Package"; |
/* Parameter object */ |
Params.Count = 1; |
Params.Pointer = &PkgArg; |
Status = AcpiEvaluateObject (NULL, "\\_PKG", &Params, NULL); |
} |
ACPI_STATUS |
AeGetDevices ( |
ACPI_HANDLE ObjHandle, |
UINT32 NestingLevel, |
void *Context, |
void **ReturnValue) |
{ |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: ExecuteOSI |
* |
* PARAMETERS: OsiString - String passed to _OSI method |
* ExpectedResult - 0 (FALSE) or 0xFFFFFFFF (TRUE) |
* |
* RETURN: Status |
* |
* DESCRIPTION: Execute the internally implemented (in ACPICA) _OSI method. |
* |
*****************************************************************************/ |
ACPI_STATUS |
ExecuteOSI ( |
char *OsiString, |
UINT32 ExpectedResult) |
{ |
ACPI_STATUS Status; |
ACPI_OBJECT_LIST ArgList; |
ACPI_OBJECT Arg[1]; |
ACPI_BUFFER ReturnValue; |
ACPI_OBJECT *Obj; |
/* Setup input argument */ |
ArgList.Count = 1; |
ArgList.Pointer = Arg; |
Arg[0].Type = ACPI_TYPE_STRING; |
Arg[0].String.Pointer = OsiString; |
Arg[0].String.Length = strlen (Arg[0].String.Pointer); |
/* Ask ACPICA to allocate space for the return object */ |
ReturnValue.Length = ACPI_ALLOCATE_BUFFER; |
Status = AcpiEvaluateObject (NULL, "\\_OSI", &ArgList, &ReturnValue); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not execute _OSI method, %s\n", |
AcpiFormatException (Status)); |
return (Status); |
} |
if (ReturnValue.Length < sizeof (ACPI_OBJECT)) |
{ |
AcpiOsPrintf ("Return value from _OSI method too small, %.8X\n", |
ReturnValue.Length); |
return (AE_ERROR); |
} |
Obj = ReturnValue.Pointer; |
if (Obj->Type != ACPI_TYPE_INTEGER) |
{ |
AcpiOsPrintf ("Invalid return type from _OSI method, %.2X\n", Obj->Type); |
return (AE_ERROR); |
} |
if (Obj->Integer.Value != ExpectedResult) |
{ |
AcpiOsPrintf ("Invalid return value from _OSI, expected %.8X found %.8X\n", |
ExpectedResult, (UINT32) Obj->Integer.Value); |
return (AE_ERROR); |
} |
/* Reset the OSI data */ |
AcpiGbl_OsiData = 0; |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeGenericRegisters |
* |
* DESCRIPTION: Call the AcpiRead/Write interfaces. |
* |
*****************************************************************************/ |
ACPI_GENERIC_ADDRESS GenericRegister; |
void |
AeGenericRegisters ( |
void) |
{ |
ACPI_STATUS Status; |
UINT64 Value; |
GenericRegister.Address = 0x1234; |
GenericRegister.BitWidth = 64; |
GenericRegister.BitOffset = 0; |
GenericRegister.SpaceId = ACPI_ADR_SPACE_SYSTEM_IO; |
Status = AcpiRead (&Value, &GenericRegister); |
Status = AcpiWrite (Value, &GenericRegister); |
GenericRegister.Address = 0x12345678; |
GenericRegister.BitOffset = 0; |
GenericRegister.SpaceId = ACPI_ADR_SPACE_SYSTEM_MEMORY; |
Status = AcpiRead (&Value, &GenericRegister); |
Status = AcpiWrite (Value, &GenericRegister); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeHardwareInterfaces |
* |
* DESCRIPTION: Call various hardware support interfaces |
* |
*****************************************************************************/ |
void |
AeHardwareInterfaces ( |
void) |
{ |
ACPI_STATUS Status; |
UINT32 Value; |
Status = AcpiWriteBitRegister (ACPI_BITREG_WAKE_STATUS, 1); |
Status = AcpiWriteBitRegister (ACPI_BITREG_GLOBAL_LOCK_ENABLE, 1); |
Status = AcpiWriteBitRegister (ACPI_BITREG_SLEEP_ENABLE, 1); |
Status = AcpiWriteBitRegister (ACPI_BITREG_ARB_DISABLE, 1); |
Status = AcpiReadBitRegister (ACPI_BITREG_WAKE_STATUS, &Value); |
Status = AcpiReadBitRegister (ACPI_BITREG_GLOBAL_LOCK_ENABLE, &Value); |
Status = AcpiReadBitRegister (ACPI_BITREG_SLEEP_ENABLE, &Value); |
Status = AcpiReadBitRegister (ACPI_BITREG_ARB_DISABLE, &Value); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeMiscellaneousTests |
* |
* DESCRIPTION: Various ACPICA validation tests. |
* |
*****************************************************************************/ |
void |
AeMiscellaneousTests ( |
void) |
{ |
ACPI_HANDLE Handle; |
ACPI_BUFFER ReturnBuf; |
char Buffer[32]; |
ACPI_VENDOR_UUID Uuid = {0, {ACPI_INIT_UUID (0,0,0,0,0,0,0,0,0,0,0)}}; |
ACPI_STATUS Status; |
UINT32 LockHandle1; |
UINT32 LockHandle2; |
ACPI_STATISTICS Stats; |
AeHardwareInterfaces (); |
AeGenericRegisters (); |
AeSetupConfiguration (Ssdt3Code); |
AeTestBufferArgument(); |
AeTestPackageArgument (); |
ExecuteOSI ("Windows 2001", 0xFFFFFFFF); |
ExecuteOSI ("MichiganTerminalSystem", 0); |
ReturnBuf.Length = 32; |
ReturnBuf.Pointer = Buffer; |
AcpiGetName (AcpiGbl_RootNode, ACPI_FULL_PATHNAME, &ReturnBuf); |
AcpiEnableEvent (ACPI_EVENT_GLOBAL, 0); |
/* |
* GPEs: Handlers, enable/disable, etc. |
*/ |
AcpiInstallGpeHandler (NULL, 0, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 0, ACPI_GPE_TYPE_RUNTIME); |
AcpiRemoveGpeHandler (NULL, 0, AeGpeHandler); |
AcpiInstallGpeHandler (NULL, 0, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 0, ACPI_GPE_TYPE_RUNTIME); |
AcpiSetGpe (NULL, 0, ACPI_GPE_DISABLE); |
AcpiSetGpe (NULL, 0, ACPI_GPE_ENABLE); |
AcpiInstallGpeHandler (NULL, 1, ACPI_GPE_EDGE_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 1, ACPI_GPE_TYPE_RUNTIME); |
AcpiInstallGpeHandler (NULL, 2, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 2, ACPI_GPE_TYPE_RUNTIME); |
AcpiInstallGpeHandler (NULL, 3, ACPI_GPE_EDGE_TRIGGERED, AeGpeHandler, NULL); |
AcpiInstallGpeHandler (NULL, 4, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiInstallGpeHandler (NULL, 5, ACPI_GPE_EDGE_TRIGGERED, AeGpeHandler, NULL); |
AcpiInstallGpeHandler (NULL, 0x19, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 0x19, ACPI_GPE_TYPE_RUNTIME); |
AcpiInstallGpeHandler (NULL, 0x62, ACPI_GPE_LEVEL_TRIGGERED, AeGpeHandler, NULL); |
AcpiEnableGpe (NULL, 0x62, ACPI_GPE_TYPE_RUNTIME); |
AcpiDisableGpe (NULL, 0x62, ACPI_GPE_TYPE_RUNTIME); |
AfInstallGpeBlock (); |
Status = AcpiGetHandle (NULL, "RSRC", &Handle); |
if (ACPI_SUCCESS (Status)) |
{ |
ReturnBuf.Length = ACPI_ALLOCATE_BUFFER; |
Status = AcpiGetVendorResource (Handle, "_CRS", &Uuid, &ReturnBuf); |
if (ACPI_SUCCESS (Status)) |
{ |
AcpiOsFree (ReturnBuf.Pointer); |
} |
} |
/* Test global lock */ |
Status = AcpiAcquireGlobalLock (0xFFFF, &LockHandle1); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not get GlobalLock, %X\n", Status); |
} |
Status = AcpiAcquireGlobalLock (0x5, &LockHandle2); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not get GlobalLock, %X\n", Status); |
} |
Status = AcpiReleaseGlobalLock (LockHandle1); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not release GlobalLock, %X\n", Status); |
} |
Status = AcpiReleaseGlobalLock (LockHandle2); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not release GlobalLock, %X\n", Status); |
} |
/* Get Devices */ |
Status = AcpiGetDevices (NULL, AeGetDevices, NULL, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not AcpiGetDevices, %X\n", Status); |
} |
Status = AcpiGetStatistics (&Stats); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("Could not AcpiGetStatistics, %X\n", Status); |
} |
} |
/drivers/devman/acpica/tools/acpiexec/aehandlers.c |
---|
0,0 → 1,966 |
/****************************************************************************** |
* |
* Module Name: aehandlers - Various handlers for acpiexec |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#include "aecommon.h" |
#define _COMPONENT ACPI_TOOLS |
ACPI_MODULE_NAME ("aehandlers") |
/* Local prototypes */ |
void |
AeNotifyHandler ( |
ACPI_HANDLE Device, |
UINT32 Value, |
void *Context); |
void |
AeDeviceNotifyHandler ( |
ACPI_HANDLE Device, |
UINT32 Value, |
void *Context); |
ACPI_STATUS |
AeExceptionHandler ( |
ACPI_STATUS AmlStatus, |
ACPI_NAME Name, |
UINT16 Opcode, |
UINT32 AmlOffset, |
void *Context); |
ACPI_STATUS |
AeTableHandler ( |
UINT32 Event, |
void *Table, |
void *Context); |
ACPI_STATUS |
AeRegionInit ( |
ACPI_HANDLE RegionHandle, |
UINT32 Function, |
void *HandlerContext, |
void **RegionContext); |
void |
AeAttachedDataHandler ( |
ACPI_HANDLE Object, |
void *Data); |
UINT32 SigintCount = 0; |
AE_DEBUG_REGIONS AeRegions; |
/****************************************************************************** |
* |
* FUNCTION: AeCtrlCHandler |
* |
* PARAMETERS: Sig |
* |
* RETURN: none |
* |
* DESCRIPTION: Control-C handler. Abort running control method if any. |
* |
*****************************************************************************/ |
void __cdecl |
AeCtrlCHandler ( |
int Sig) |
{ |
signal (SIGINT, SIG_IGN); |
SigintCount++; |
AcpiOsPrintf ("Caught a ctrl-c (#%u)\n\n", SigintCount); |
if (AcpiGbl_MethodExecuting) |
{ |
AcpiGbl_AbortMethod = TRUE; |
signal (SIGINT, AeCtrlCHandler); |
if (SigintCount < 10) |
{ |
return; |
} |
} |
exit (0); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeNotifyHandler |
* |
* PARAMETERS: Standard notify handler parameters |
* |
* RETURN: Status |
* |
* DESCRIPTION: System notify handler for AcpiExec utility. Used by the ASL |
* test suite(s) to communicate errors and other information to |
* this utility via the Notify() operator. |
* |
*****************************************************************************/ |
void |
AeNotifyHandler ( |
ACPI_HANDLE Device, |
UINT32 Value, |
void *Context) |
{ |
switch (Value) |
{ |
#if 0 |
case 0: |
printf ("[AcpiExec] Method Error 0x%X: Results not equal\n", Value); |
if (AcpiGbl_DebugFile) |
{ |
AcpiOsPrintf ("[AcpiExec] Method Error: Results not equal\n"); |
} |
break; |
case 1: |
printf ("[AcpiExec] Method Error: Incorrect numeric result\n"); |
if (AcpiGbl_DebugFile) |
{ |
AcpiOsPrintf ("[AcpiExec] Method Error: Incorrect numeric result\n"); |
} |
break; |
case 2: |
printf ("[AcpiExec] Method Error: An operand was overwritten\n"); |
if (AcpiGbl_DebugFile) |
{ |
AcpiOsPrintf ("[AcpiExec] Method Error: An operand was overwritten\n"); |
} |
break; |
#endif |
default: |
printf ("[AcpiExec] Received a System Notify on [%4.4s] %p Value 0x%2.2X (%s)\n", |
AcpiUtGetNodeName (Device), Device, Value, |
AcpiUtGetNotifyName (Value)); |
if (AcpiGbl_DebugFile) |
{ |
AcpiOsPrintf ("[AcpiExec] Received a system notify, Value 0x%2.2X\n", Value); |
} |
(void) AcpiEvaluateObject (Device, "_NOT", NULL, NULL); |
break; |
} |
} |
/****************************************************************************** |
* |
* FUNCTION: AeDeviceNotifyHandler |
* |
* PARAMETERS: Standard notify handler parameters |
* |
* RETURN: Status |
* |
* DESCRIPTION: Device notify handler for AcpiExec utility. Used by the ASL |
* test suite(s) to communicate errors and other information to |
* this utility via the Notify() operator. |
* |
*****************************************************************************/ |
void |
AeDeviceNotifyHandler ( |
ACPI_HANDLE Device, |
UINT32 Value, |
void *Context) |
{ |
printf ("[AcpiExec] Received a Device Notify on [%4.4s] %p Value 0x%2.2X (%s)\n", |
AcpiUtGetNodeName (Device), Device, Value, |
AcpiUtGetNotifyName (Value)); |
if (AcpiGbl_DebugFile) |
{ |
AcpiOsPrintf ("[AcpiExec] Received a device notify, Value 0x%2.2X\n", Value); |
} |
(void) AcpiEvaluateObject (Device, "_NOT", NULL, NULL); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeExceptionHandler |
* |
* PARAMETERS: Standard exception handler parameters |
* |
* RETURN: Status |
* |
* DESCRIPTION: System exception handler for AcpiExec utility. |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeExceptionHandler ( |
ACPI_STATUS AmlStatus, |
ACPI_NAME Name, |
UINT16 Opcode, |
UINT32 AmlOffset, |
void *Context) |
{ |
ACPI_STATUS NewAmlStatus = AmlStatus; |
ACPI_STATUS Status; |
ACPI_BUFFER ReturnObj; |
ACPI_OBJECT_LIST ArgList; |
ACPI_OBJECT Arg[3]; |
const char *Exception; |
Exception = AcpiFormatException (AmlStatus); |
AcpiOsPrintf ("[AcpiExec] Exception %s during execution ", Exception); |
if (Name) |
{ |
AcpiOsPrintf ("of method [%4.4s]", (char *) &Name); |
} |
else |
{ |
AcpiOsPrintf ("at module level (table load)"); |
} |
AcpiOsPrintf (" Opcode [%s] @%X\n", AcpiPsGetOpcodeName (Opcode), AmlOffset); |
/* |
* Invoke the _ERR method if present |
* |
* Setup parameter object |
*/ |
ArgList.Count = 3; |
ArgList.Pointer = Arg; |
Arg[0].Type = ACPI_TYPE_INTEGER; |
Arg[0].Integer.Value = AmlStatus; |
Arg[1].Type = ACPI_TYPE_STRING; |
Arg[1].String.Pointer = ACPI_CAST_PTR (char, Exception); |
Arg[1].String.Length = ACPI_STRLEN (Exception); |
Arg[2].Type = ACPI_TYPE_INTEGER; |
Arg[2].Integer.Value = ACPI_TO_INTEGER (AcpiOsGetThreadId()); |
/* Setup return buffer */ |
ReturnObj.Pointer = NULL; |
ReturnObj.Length = ACPI_ALLOCATE_BUFFER; |
Status = AcpiEvaluateObject (NULL, "\\_ERR", &ArgList, &ReturnObj); |
if (ACPI_SUCCESS (Status)) |
{ |
if (ReturnObj.Pointer) |
{ |
/* Override original status */ |
NewAmlStatus = (ACPI_STATUS) |
((ACPI_OBJECT *) ReturnObj.Pointer)->Integer.Value; |
AcpiOsFree (ReturnObj.Pointer); |
} |
} |
else if (Status != AE_NOT_FOUND) |
{ |
AcpiOsPrintf ("[AcpiExec] Could not execute _ERR method, %s\n", |
AcpiFormatException (Status)); |
} |
/* Global override */ |
if (AcpiGbl_IgnoreErrors) |
{ |
NewAmlStatus = AE_OK; |
} |
if (NewAmlStatus != AmlStatus) |
{ |
AcpiOsPrintf ("[AcpiExec] Exception override, new status %s\n", |
AcpiFormatException (NewAmlStatus)); |
} |
return (NewAmlStatus); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeTableHandler |
* |
* PARAMETERS: Table handler |
* |
* RETURN: Status |
* |
* DESCRIPTION: System table handler for AcpiExec utility. |
* |
*****************************************************************************/ |
char *TableEvents[] = |
{ |
"LOAD", |
"UNLOAD", |
"UNKNOWN" |
}; |
ACPI_STATUS |
AeTableHandler ( |
UINT32 Event, |
void *Table, |
void *Context) |
{ |
if (Event > ACPI_NUM_TABLE_EVENTS) |
{ |
Event = ACPI_NUM_TABLE_EVENTS; |
} |
/* TBD: could dump entire table header, need a header dump routine */ |
printf ("[AcpiExec] Table Event %s, [%4.4s] %p\n", |
TableEvents[Event], ((ACPI_TABLE_HEADER *) Table)->Signature, Table); |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeGpeHandler |
* |
* DESCRIPTION: GPE handler for acpiexec |
* |
*****************************************************************************/ |
UINT32 |
AeGpeHandler ( |
void *Context) |
{ |
AcpiOsPrintf ("Received a GPE at handler\n"); |
return (0); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeAttachedDataHandler |
* |
* DESCRIPTION: Handler for deletion of nodes with attached data (attached via |
* AcpiAttachData) |
* |
*****************************************************************************/ |
void |
AeAttachedDataHandler ( |
ACPI_HANDLE Object, |
void *Data) |
{ |
ACPI_NAMESPACE_NODE *Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Data); |
AcpiOsPrintf ("Received an attached data deletion on %4.4s\n", |
Node->Name.Ascii); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeRegionInit |
* |
* PARAMETERS: None |
* |
* RETURN: Status |
* |
* DESCRIPTION: Opregion init function. |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeRegionInit ( |
ACPI_HANDLE RegionHandle, |
UINT32 Function, |
void *HandlerContext, |
void **RegionContext) |
{ |
/* |
* Real simple, set the RegionContext to the RegionHandle |
*/ |
*RegionContext = RegionHandle; |
return AE_OK; |
} |
/****************************************************************************** |
* |
* FUNCTION: AeInstallHandlers |
* |
* PARAMETERS: None |
* |
* RETURN: Status |
* |
* DESCRIPTION: Install handlers for the AcpiExec utility. |
* |
*****************************************************************************/ |
ACPI_ADR_SPACE_TYPE SpaceId[] = {0, 1, 2, 3, 4, 5, 6, 7, 0x80}; |
#define AEXEC_NUM_REGIONS 9 |
ACPI_STATUS |
AeInstallHandlers (void) |
{ |
ACPI_STATUS Status; |
UINT32 i; |
ACPI_HANDLE Handle; |
ACPI_FUNCTION_ENTRY (); |
Status = AcpiInstallTableHandler (AeTableHandler, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install table handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiInstallExceptionHandler (AeExceptionHandler); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install exception handler, %s\n", |
AcpiFormatException (Status)); |
} |
/* Install global notify handler */ |
Status = AcpiInstallNotifyHandler (ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY, |
AeNotifyHandler, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install a global notify handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiInstallNotifyHandler (ACPI_ROOT_OBJECT, ACPI_DEVICE_NOTIFY, |
AeDeviceNotifyHandler, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install a global notify handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiGetHandle (NULL, "\\_SB", &Handle); |
if (ACPI_SUCCESS (Status)) |
{ |
Status = AcpiInstallNotifyHandler (Handle, ACPI_SYSTEM_NOTIFY, |
AeNotifyHandler, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install a notify handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiRemoveNotifyHandler (Handle, ACPI_SYSTEM_NOTIFY, |
AeNotifyHandler); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not remove a notify handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiInstallNotifyHandler (Handle, ACPI_ALL_NOTIFY, |
AeNotifyHandler, NULL); |
Status = AcpiRemoveNotifyHandler (Handle, ACPI_ALL_NOTIFY, |
AeNotifyHandler); |
Status = AcpiInstallNotifyHandler (Handle, ACPI_ALL_NOTIFY, |
AeNotifyHandler, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("Could not install a notify handler, %s\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiAttachData (Handle, AeAttachedDataHandler, Handle); |
Status = AcpiDetachData (Handle, AeAttachedDataHandler); |
Status = AcpiAttachData (Handle, AeAttachedDataHandler, Handle); |
} |
else |
{ |
printf ("No _SB_ found, %s\n", AcpiFormatException (Status)); |
} |
/* Set a handler for all supported operation regions */ |
for (i = 0; i < AEXEC_NUM_REGIONS; i++) |
{ |
Status = AcpiRemoveAddressSpaceHandler (AcpiGbl_RootNode, |
SpaceId[i], AeRegionHandler); |
/* Install handler at the root object. |
* TBD: all default handlers should be installed here! |
*/ |
Status = AcpiInstallAddressSpaceHandler (AcpiGbl_RootNode, |
SpaceId[i], AeRegionHandler, AeRegionInit, NULL); |
if (ACPI_FAILURE (Status)) |
{ |
ACPI_EXCEPTION ((AE_INFO, Status, |
"Could not install an OpRegion handler for %s space(%u)", |
AcpiUtGetRegionName((UINT8) SpaceId[i]), SpaceId[i])); |
return (Status); |
} |
} |
/* |
* Initialize the global Region Handler space |
* MCW 3/23/00 |
*/ |
AeRegions.NumberOfRegions = 0; |
AeRegions.RegionList = NULL; |
return Status; |
} |
/****************************************************************************** |
* |
* FUNCTION: AeRegionHandler |
* |
* PARAMETERS: Standard region handler parameters |
* |
* RETURN: Status |
* |
* DESCRIPTION: Test handler - Handles some dummy regions via memory that can |
* be manipulated in Ring 3. Simulates actual reads and writes. |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeRegionHandler ( |
UINT32 Function, |
ACPI_PHYSICAL_ADDRESS Address, |
UINT32 BitWidth, |
UINT64 *Value, |
void *HandlerContext, |
void *RegionContext) |
{ |
ACPI_OPERAND_OBJECT *RegionObject = ACPI_CAST_PTR (ACPI_OPERAND_OBJECT, RegionContext); |
UINT8 *Buffer = ACPI_CAST_PTR (UINT8, Value); |
ACPI_PHYSICAL_ADDRESS BaseAddress; |
ACPI_SIZE Length; |
BOOLEAN BufferExists; |
AE_REGION *RegionElement; |
void *BufferValue; |
ACPI_STATUS Status; |
UINT32 ByteWidth; |
UINT32 i; |
UINT8 SpaceId; |
ACPI_FUNCTION_NAME (AeRegionHandler); |
/* |
* If the object is not a region, simply return |
*/ |
if (RegionObject->Region.Type != ACPI_TYPE_REGION) |
{ |
return AE_OK; |
} |
/* |
* Region support can be disabled with the -r option. |
* We use this to support dynamically loaded tables where we pass a valid |
* address to the AML. |
*/ |
if (AcpiGbl_DbOpt_NoRegionSupport) |
{ |
BufferValue = ACPI_TO_POINTER (Address); |
ByteWidth = (BitWidth / 8); |
if (BitWidth % 8) |
{ |
ByteWidth += 1; |
} |
goto DoFunction; |
} |
/* |
* Find the region's address space and length before searching |
* the linked list. |
*/ |
BaseAddress = RegionObject->Region.Address; |
Length = (ACPI_SIZE) RegionObject->Region.Length; |
SpaceId = RegionObject->Region.SpaceId; |
ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, "Operation Region request on %s at 0x%X\n", |
AcpiUtGetRegionName (RegionObject->Region.SpaceId), |
(UINT32) Address)); |
switch (SpaceId) |
{ |
case ACPI_ADR_SPACE_SYSTEM_IO: |
/* |
* For I/O space, exercise the port validation |
*/ |
switch (Function & ACPI_IO_MASK) |
{ |
case ACPI_READ: |
Status = AcpiHwReadPort (Address, (UINT32 *) Value, BitWidth); |
break; |
case ACPI_WRITE: |
Status = AcpiHwWritePort (Address, (UINT32) *Value, BitWidth); |
break; |
default: |
Status = AE_BAD_PARAMETER; |
break; |
} |
if (ACPI_FAILURE (Status)) |
{ |
return (Status); |
} |
/* Now go ahead and simulate the hardware */ |
break; |
case ACPI_ADR_SPACE_SMBUS: |
Length = 0; |
switch (Function & ACPI_IO_MASK) |
{ |
case ACPI_READ: |
switch (Function >> 16) |
{ |
case AML_FIELD_ATTRIB_SMB_QUICK: |
case AML_FIELD_ATTRIB_SMB_SEND_RCV: |
case AML_FIELD_ATTRIB_SMB_BYTE: |
Length = 1; |
break; |
case AML_FIELD_ATTRIB_SMB_WORD: |
case AML_FIELD_ATTRIB_SMB_WORD_CALL: |
Length = 2; |
break; |
case AML_FIELD_ATTRIB_SMB_BLOCK: |
case AML_FIELD_ATTRIB_SMB_BLOCK_CALL: |
Length = 32; |
break; |
default: |
break; |
} |
break; |
case ACPI_WRITE: |
switch (Function >> 16) |
{ |
case AML_FIELD_ATTRIB_SMB_QUICK: |
case AML_FIELD_ATTRIB_SMB_SEND_RCV: |
case AML_FIELD_ATTRIB_SMB_BYTE: |
case AML_FIELD_ATTRIB_SMB_WORD: |
case AML_FIELD_ATTRIB_SMB_BLOCK: |
Length = 0; |
break; |
case AML_FIELD_ATTRIB_SMB_WORD_CALL: |
Length = 2; |
break; |
case AML_FIELD_ATTRIB_SMB_BLOCK_CALL: |
Length = 32; |
break; |
default: |
break; |
} |
break; |
default: |
break; |
} |
for (i = 0; i < Length; i++) |
{ |
Buffer[i+2] = (UINT8) (0xA0 + i); |
} |
Buffer[0] = 0x7A; |
Buffer[1] = (UINT8) Length; |
return (AE_OK); |
case ACPI_ADR_SPACE_IPMI: /* ACPI 4.0 */ |
AcpiOsPrintf ("AcpiExec: Received IPMI request: " |
"Address %X BaseAddress %X Length %X Width %X BufferLength %u\n", |
(UINT32) Address, (UINT32) BaseAddress, |
Length, BitWidth, Buffer[1]); |
/* |
* Regardless of a READ or WRITE, this handler is passed a 66-byte |
* buffer in which to return the IPMI status/length/data. |
* |
* Return some example data to show use of the bidirectional buffer |
*/ |
Buffer[0] = 0; /* Status byte */ |
Buffer[1] = 64; /* Return buffer data length */ |
Buffer[2] = 0; /* Completion code */ |
Buffer[3] = 0x34; /* Power measurement */ |
Buffer[4] = 0x12; /* Power measurement */ |
Buffer[65] = 0xEE; /* last buffer byte */ |
return (AE_OK); |
default: |
break; |
} |
/* |
* Search through the linked list for this region's buffer |
*/ |
BufferExists = FALSE; |
RegionElement = AeRegions.RegionList; |
if (AeRegions.NumberOfRegions) |
{ |
while (!BufferExists && RegionElement) |
{ |
if (RegionElement->Address == BaseAddress && |
RegionElement->Length == Length && |
RegionElement->SpaceId == SpaceId) |
{ |
BufferExists = TRUE; |
} |
else |
{ |
RegionElement = RegionElement->NextRegion; |
} |
} |
} |
/* |
* If the Region buffer does not exist, create it now |
*/ |
if (!BufferExists) |
{ |
/* |
* Do the memory allocations first |
*/ |
RegionElement = AcpiOsAllocate (sizeof (AE_REGION)); |
if (!RegionElement) |
{ |
return AE_NO_MEMORY; |
} |
RegionElement->Buffer = AcpiOsAllocate (Length); |
if (!RegionElement->Buffer) |
{ |
AcpiOsFree (RegionElement); |
return AE_NO_MEMORY; |
} |
/* Initialize the region with the default fill value */ |
ACPI_MEMSET (RegionElement->Buffer, AcpiGbl_RegionFillValue, Length); |
RegionElement->Address = BaseAddress; |
RegionElement->Length = Length; |
RegionElement->SpaceId = SpaceId; |
RegionElement->NextRegion = NULL; |
/* |
* Increment the number of regions and put this one |
* at the head of the list as it will probably get accessed |
* more often anyway. |
*/ |
AeRegions.NumberOfRegions += 1; |
if (AeRegions.RegionList) |
{ |
RegionElement->NextRegion = AeRegions.RegionList; |
} |
AeRegions.RegionList = RegionElement; |
} |
/* |
* Calculate the size of the memory copy |
*/ |
ByteWidth = (BitWidth / 8); |
if (BitWidth % 8) |
{ |
ByteWidth += 1; |
} |
/* |
* The buffer exists and is pointed to by RegionElement. |
* We now need to verify the request is valid and perform the operation. |
* |
* NOTE: RegionElement->Length is in bytes, therefore it we compare against |
* ByteWidth (see above) |
*/ |
if (((UINT64) Address + ByteWidth) > |
((UINT64)(RegionElement->Address) + RegionElement->Length)) |
{ |
ACPI_WARNING ((AE_INFO, |
"Request on [%4.4s] is beyond region limit Req-0x%X+0x%X, Base=0x%X, Len-0x%X", |
(RegionObject->Region.Node)->Name.Ascii, (UINT32) Address, |
ByteWidth, (UINT32)(RegionElement->Address), |
RegionElement->Length)); |
return AE_AML_REGION_LIMIT; |
} |
/* |
* Get BufferValue to point to the "address" in the buffer |
*/ |
BufferValue = ((UINT8 *) RegionElement->Buffer + |
((UINT64) Address - (UINT64) RegionElement->Address)); |
DoFunction: |
/* |
* Perform a read or write to the buffer space |
*/ |
switch (Function) |
{ |
case ACPI_READ: |
/* |
* Set the pointer Value to whatever is in the buffer |
*/ |
ACPI_MEMCPY (Value, BufferValue, ByteWidth); |
break; |
case ACPI_WRITE: |
/* |
* Write the contents of Value to the buffer |
*/ |
ACPI_MEMCPY (BufferValue, Value, ByteWidth); |
break; |
default: |
return AE_BAD_PARAMETER; |
} |
return AE_OK; |
} |
/drivers/devman/acpica/tools/acpiexec/aemain.c |
---|
0,0 → 1,735 |
/****************************************************************************** |
* |
* Module Name: aemain - Main routine for the AcpiExec utility |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#include "aecommon.h" |
#ifdef _DEBUG |
#include <crtdbg.h> |
#endif |
#define _COMPONENT PARSER |
ACPI_MODULE_NAME ("aemain") |
UINT8 AcpiGbl_BatchMode = 0; |
UINT8 AcpiGbl_RegionFillValue = 0; |
BOOLEAN AcpiGbl_IgnoreErrors = FALSE; |
BOOLEAN AcpiGbl_DbOpt_NoRegionSupport = FALSE; |
BOOLEAN AcpiGbl_DebugTimeout = FALSE; |
char BatchBuffer[128]; |
AE_TABLE_DESC *AeTableListHead = NULL; |
#define ASL_MAX_FILES 256 |
char *FileList[ASL_MAX_FILES]; |
int FileCount; |
#define AE_SUPPORTED_OPTIONS "?b:d:e:f:gm^ovx:" |
/****************************************************************************** |
* |
* FUNCTION: usage |
* |
* PARAMETERS: None |
* |
* RETURN: None |
* |
* DESCRIPTION: Print a usage message |
* |
*****************************************************************************/ |
static void |
usage (void) |
{ |
printf ("Usage: acpiexec [options] AMLfile1 AMLfile2 ...\n\n"); |
printf ("Where:\n"); |
printf (" -? Display this message\n"); |
printf (" -b <CommandLine> Batch mode command execution\n"); |
printf (" -m [Method] Batch mode method execution. Default=MAIN\n"); |
printf ("\n"); |
printf (" -da Disable method abort on error\n"); |
printf (" -di Disable execution of STA/INI methods during init\n"); |
printf (" -do Disable Operation Region address simulation\n"); |
printf (" -dt Disable allocation tracking (performance)\n"); |
printf ("\n"); |
printf (" -ef Enable display of final memory statistics\n"); |
printf (" -em Enable Interpreter Serialized Mode\n"); |
printf (" -es Enable Interpreter Slack Mode\n"); |
printf (" -et Enable debug semaphore timeout\n"); |
printf ("\n"); |
printf (" -f <Value> Operation Region initialization fill value\n"); |
printf (" -v Verbose initialization output\n"); |
printf (" -x <DebugLevel> Debug output level\n"); |
} |
/****************************************************************************** |
* |
* FUNCTION: AcpiDbRunBatchMode |
* |
* PARAMETERS: BatchCommandLine - A semicolon separated list of commands |
* to be executed. |
* Use only commas to separate elements of |
* particular command. |
* RETURN: Status |
* |
* DESCRIPTION: For each command of list separated by ';' prepare the command |
* buffer and pass it to AcpiDbCommandDispatch. |
* |
*****************************************************************************/ |
static ACPI_STATUS |
AcpiDbRunBatchMode ( |
void) |
{ |
ACPI_STATUS Status; |
char *Ptr = BatchBuffer; |
char *Cmd = Ptr; |
UINT8 Run = 0; |
AcpiGbl_MethodExecuting = FALSE; |
AcpiGbl_StepToNextCall = FALSE; |
while (*Ptr) |
{ |
if (*Ptr == ',') |
{ |
/* Convert commas to spaces */ |
*Ptr = ' '; |
} |
else if (*Ptr == ';') |
{ |
*Ptr = '\0'; |
Run = 1; |
} |
Ptr++; |
if (Run || (*Ptr == '\0')) |
{ |
(void) AcpiDbCommandDispatch (Cmd, NULL, NULL); |
Run = 0; |
Cmd = Ptr; |
} |
} |
Status = AcpiTerminate (); |
return (Status); |
} |
/******************************************************************************* |
* |
* FUNCTION: FlStrdup |
* |
* DESCRIPTION: Local strdup function |
* |
******************************************************************************/ |
static char * |
FlStrdup ( |
char *String) |
{ |
char *NewString; |
NewString = AcpiOsAllocate (strlen (String) + 1); |
if (!NewString) |
{ |
return (NULL); |
} |
strcpy (NewString, String); |
return (NewString); |
} |
/******************************************************************************* |
* |
* FUNCTION: FlSplitInputPathname |
* |
* PARAMETERS: InputFilename - The user-specified ASL source file to be |
* compiled |
* OutDirectoryPath - Where the directory path prefix is |
* returned |
* OutFilename - Where the filename part is returned |
* |
* RETURN: Status |
* |
* DESCRIPTION: Split the input path into a directory and filename part |
* 1) Directory part used to open include files |
* 2) Filename part used to generate output filenames |
* |
******************************************************************************/ |
ACPI_STATUS |
FlSplitInputPathname ( |
char *InputPath, |
char **OutDirectoryPath, |
char **OutFilename) |
{ |
char *Substring; |
char *DirectoryPath; |
char *Filename; |
*OutDirectoryPath = NULL; |
*OutFilename = NULL; |
if (!InputPath) |
{ |
return (AE_OK); |
} |
/* Get the path to the input filename's directory */ |
DirectoryPath = FlStrdup (InputPath); |
if (!DirectoryPath) |
{ |
return (AE_NO_MEMORY); |
} |
Substring = strrchr (DirectoryPath, '\\'); |
if (!Substring) |
{ |
Substring = strrchr (DirectoryPath, '/'); |
if (!Substring) |
{ |
Substring = strrchr (DirectoryPath, ':'); |
} |
} |
if (!Substring) |
{ |
DirectoryPath[0] = 0; |
Filename = FlStrdup (InputPath); |
} |
else |
{ |
Filename = FlStrdup (Substring + 1); |
*(Substring+1) = 0; |
} |
if (!Filename) |
{ |
return (AE_NO_MEMORY); |
} |
*OutDirectoryPath = DirectoryPath; |
*OutFilename = Filename; |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AsDoWildcard |
* |
* PARAMETERS: DirectoryPathname - Path to parent directory |
* FileSpecifier - the wildcard specification (*.c, etc.) |
* |
* RETURN: Pointer to a list of filenames |
* |
* DESCRIPTION: Process files via wildcards. This function is for the Windows |
* case only. |
* |
******************************************************************************/ |
static char ** |
AsDoWildcard ( |
char *DirectoryPathname, |
char *FileSpecifier) |
{ |
#ifdef WIN32 |
void *DirInfo; |
char *Filename; |
FileCount = 0; |
/* Open parent directory */ |
DirInfo = AcpiOsOpenDirectory (DirectoryPathname, FileSpecifier, REQUEST_FILE_ONLY); |
if (!DirInfo) |
{ |
/* Either the directory or file does not exist */ |
printf ("File or directory %s%s does not exist\n", DirectoryPathname, FileSpecifier); |
return (NULL); |
} |
/* Process each file that matches the wildcard specification */ |
while ((Filename = AcpiOsGetNextFilename (DirInfo))) |
{ |
/* Add the filename to the file list */ |
FileList[FileCount] = AcpiOsAllocate (strlen (Filename) + 1); |
strcpy (FileList[FileCount], Filename); |
FileCount++; |
if (FileCount >= ASL_MAX_FILES) |
{ |
printf ("Max files reached\n"); |
FileList[0] = NULL; |
return (FileList); |
} |
} |
/* Cleanup */ |
AcpiOsCloseDirectory (DirInfo); |
FileList[FileCount] = NULL; |
return (FileList); |
#else |
if (!FileSpecifier) |
{ |
return (NULL); |
} |
/* |
* Linux/Unix cases - Wildcards are expanded by the shell automatically. |
* Just return the filename in a null terminated list |
*/ |
FileList[0] = AcpiOsAllocate (strlen (FileSpecifier) + 1); |
strcpy (FileList[0], FileSpecifier); |
FileList[1] = NULL; |
return (FileList); |
#endif |
} |
/****************************************************************************** |
* |
* FUNCTION: main |
* |
* PARAMETERS: argc, argv |
* |
* RETURN: Status |
* |
* DESCRIPTION: Main routine for AcpiDump utility |
* |
*****************************************************************************/ |
int ACPI_SYSTEM_XFACE |
main ( |
int argc, |
char **argv) |
{ |
int j; |
ACPI_STATUS Status; |
UINT32 InitFlags; |
ACPI_TABLE_HEADER *Table = NULL; |
UINT32 TableCount; |
AE_TABLE_DESC *TableDesc; |
char **FileList; |
char *Filename; |
char *Directory; |
char *FullPathname; |
#ifdef _DEBUG |
_CrtSetDbgFlag (_CRTDBG_CHECK_ALWAYS_DF | _CRTDBG_LEAK_CHECK_DF | |
_CrtSetDbgFlag(_CRTDBG_REPORT_FLAG)); |
#endif |
printf ("\nIntel ACPI Component Architecture\nAML Execution/Debug Utility"); |
printf (" version %8.8X", ((UINT32) ACPI_CA_VERSION)); |
printf (" [%s]\n\n", __DATE__); |
if (argc < 2) |
{ |
usage (); |
return 0; |
} |
signal (SIGINT, AeCtrlCHandler); |
/* Init globals */ |
AcpiDbgLevel = ACPI_NORMAL_DEFAULT; |
AcpiDbgLayer = 0xFFFFFFFF; |
/* Init ACPI and start debugger thread */ |
AcpiInitializeSubsystem (); |
/* Get the command line options */ |
while ((j = AcpiGetopt (argc, argv, AE_SUPPORTED_OPTIONS)) != EOF) switch(j) |
{ |
case 'b': |
if (strlen (AcpiGbl_Optarg) > 127) |
{ |
printf ("**** The length of command line (%u) exceeded maximum (127)\n", |
(UINT32) strlen (AcpiGbl_Optarg)); |
return -1; |
} |
AcpiGbl_BatchMode = 1; |
strcpy (BatchBuffer, AcpiGbl_Optarg); |
break; |
case 'd': |
switch (AcpiGbl_Optarg[0]) |
{ |
case 'a': |
AcpiGbl_IgnoreErrors = TRUE; |
break; |
case 'i': |
AcpiGbl_DbOpt_ini_methods = FALSE; |
break; |
case 'o': |
AcpiGbl_DbOpt_NoRegionSupport = TRUE; |
break; |
case 't': |
#ifdef ACPI_DBG_TRACK_ALLOCATIONS |
AcpiGbl_DisableMemTracking = TRUE; |
#endif |
break; |
default: |
printf ("Unknown option: -d%s\n", AcpiGbl_Optarg); |
return (-1); |
} |
break; |
case 'e': |
switch (AcpiGbl_Optarg[0]) |
{ |
case 'f': |
#ifdef ACPI_DBG_TRACK_ALLOCATIONS |
AcpiGbl_DisplayFinalMemStats = TRUE; |
#endif |
break; |
case 'm': |
AcpiGbl_AllMethodsSerialized = TRUE; |
printf ("Enabling AML Interpreter serialized mode\n"); |
break; |
case 's': |
AcpiGbl_EnableInterpreterSlack = TRUE; |
printf ("Enabling AML Interpreter slack mode\n"); |
break; |
case 't': |
AcpiGbl_DebugTimeout = TRUE; |
break; |
default: |
printf ("Unknown option: -e%s\n", AcpiGbl_Optarg); |
return (-1); |
} |
break; |
case 'f': |
AcpiGbl_RegionFillValue = (UINT8) strtoul (AcpiGbl_Optarg, NULL, 0); |
break; |
case 'g': |
AcpiGbl_DbOpt_tables = TRUE; |
AcpiGbl_DbFilename = NULL; |
break; |
case 'm': |
AcpiGbl_BatchMode = 2; |
switch (AcpiGbl_Optarg[0]) |
{ |
case '^': |
strcpy (BatchBuffer, "MAIN"); |
break; |
default: |
strcpy (BatchBuffer, AcpiGbl_Optarg); |
break; |
} |
break; |
case 'o': |
AcpiGbl_DbOpt_disasm = TRUE; |
AcpiGbl_DbOpt_stats = TRUE; |
break; |
case 'v': |
AcpiDbgLevel |= ACPI_LV_INIT_NAMES; |
break; |
case 'x': |
AcpiDbgLevel = strtoul (AcpiGbl_Optarg, NULL, 0); |
AcpiGbl_DbConsoleDebugLevel = AcpiDbgLevel; |
printf ("Debug Level: 0x%8.8X\n", AcpiDbgLevel); |
break; |
case '?': |
case 'h': |
default: |
usage(); |
return -1; |
} |
InitFlags = (ACPI_NO_HANDLER_INIT | ACPI_NO_ACPI_ENABLE); |
if (!AcpiGbl_DbOpt_ini_methods) |
{ |
InitFlags |= (ACPI_NO_DEVICE_INIT | ACPI_NO_OBJECT_INIT); |
} |
/* The remaining arguments are filenames for ACPI tables */ |
if (argv[AcpiGbl_Optind]) |
{ |
AcpiGbl_DbOpt_tables = TRUE; |
TableCount = 0; |
/* Get each of the ACPI table files on the command line */ |
while (argv[AcpiGbl_Optind]) |
{ |
/* Split incoming path into a directory/filename combo */ |
Status = FlSplitInputPathname (argv[AcpiGbl_Optind], &Directory, &Filename); |
if (ACPI_FAILURE (Status)) |
{ |
return (Status); |
} |
/* Expand wildcards (Windows only) */ |
FileList = AsDoWildcard (Directory, Filename); |
if (!FileList) |
{ |
return -1; |
} |
while (*FileList) |
{ |
FullPathname = AcpiOsAllocate ( |
strlen (Directory) + strlen (*FileList) + 1); |
/* Construct a full path to the file */ |
strcpy (FullPathname, Directory); |
strcat (FullPathname, *FileList); |
/* Get one table */ |
Status = AcpiDbReadTableFromFile (FullPathname, &Table); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("**** Could not get input table %s, %s\n", FullPathname, |
AcpiFormatException (Status)); |
goto enterloop; |
} |
AcpiOsFree (FullPathname); |
AcpiOsFree (*FileList); |
*FileList = NULL; |
FileList++; |
/* |
* Ignore an FACS or RSDT, we can't use them. |
*/ |
if (ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_FACS) || |
ACPI_COMPARE_NAME (Table->Signature, ACPI_SIG_RSDT)) |
{ |
AcpiOsFree (Table); |
continue; |
} |
/* Allocate and link a table descriptor */ |
TableDesc = AcpiOsAllocate (sizeof (AE_TABLE_DESC)); |
TableDesc->Table = Table; |
TableDesc->Next = AeTableListHead; |
AeTableListHead = TableDesc; |
TableCount++; |
} |
AcpiGbl_Optind++; |
} |
/* Build a local RSDT with all tables and let ACPICA process the RSDT */ |
Status = AeBuildLocalTables (TableCount, AeTableListHead); |
if (ACPI_FAILURE (Status)) |
{ |
return -1; |
} |
Status = AeInstallTables (); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("**** Could not load ACPI tables, %s\n", AcpiFormatException (Status)); |
goto enterloop; |
} |
Status = AeInstallHandlers (); |
if (ACPI_FAILURE (Status)) |
{ |
goto enterloop; |
} |
/* |
* TBD: |
* Need a way to call this after the "LOAD" command |
*/ |
Status = AcpiEnableSubsystem (InitFlags); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("**** Could not EnableSubsystem, %s\n", AcpiFormatException (Status)); |
goto enterloop; |
} |
Status = AcpiInitializeObjects (InitFlags); |
if (ACPI_FAILURE (Status)) |
{ |
printf ("**** Could not InitializeObjects, %s\n", AcpiFormatException (Status)); |
goto enterloop; |
} |
AeMiscellaneousTests (); |
} |
enterloop: |
if (AcpiGbl_BatchMode == 1) |
{ |
AcpiDbRunBatchMode (); |
} |
else if (AcpiGbl_BatchMode == 2) |
{ |
AcpiDbExecute (BatchBuffer, NULL, EX_NO_SINGLE_STEP); |
} |
else |
{ |
/* Enter the debugger command loop */ |
AcpiDbUserCommands (ACPI_DEBUGGER_COMMAND_PROMPT, NULL); |
} |
return 0; |
} |
/drivers/devman/acpica/tools/acpiexec/aetables.c |
---|
0,0 → 1,724 |
/****************************************************************************** |
* |
* Module Name: aetables - Miscellaneous ACPI tables for acpiexec utility |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#include "aecommon.h" |
#define _COMPONENT ACPI_TOOLS |
ACPI_MODULE_NAME ("aetables") |
/* Local prototypes */ |
void |
AeTableOverride ( |
ACPI_TABLE_HEADER *ExistingTable, |
ACPI_TABLE_HEADER **NewTable); |
ACPI_PHYSICAL_ADDRESS |
AeLocalGetRootPointer ( |
void); |
/* |
* Misc ACPI tables to be installed |
*/ |
/* Default DSDT. This will be replaced with the input DSDT */ |
unsigned char DsdtCode[] = |
{ |
0x44,0x53,0x44,0x54,0x24,0x00,0x00,0x00, /* 00000000 "DSDT$..." */ |
0x02,0x6F,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 ".oIntel." */ |
0x4E,0x75,0x6C,0x6C,0x44,0x53,0x44,0x54, /* 00000010 "NullDSDT" */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x04,0x12,0x08,0x20, |
}; |
unsigned char LocalDsdtCode[] = |
{ |
0x44,0x53,0x44,0x54,0x24,0x00,0x00,0x00, /* 00000000 "DSDT$..." */ |
0x02,0x2C,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 ".,Intel." */ |
0x4C,0x6F,0x63,0x61,0x6C,0x00,0x00,0x00, /* 00000010 "Local..." */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x30,0x07,0x09,0x20, |
}; |
/* Several example SSDTs */ |
unsigned char Ssdt1Code[] = /* Has method _T98 */ |
{ |
0x53,0x53,0x44,0x54,0x30,0x00,0x00,0x00, /* 00000000 "SSDT0..." */ |
0x01,0xB8,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 "..Intel." */ |
0x4D,0x61,0x6E,0x79,0x00,0x00,0x00,0x00, /* 00000010 "Many...." */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x24,0x04,0x03,0x20,0x14,0x0B,0x5F,0x54, /* 00000020 "$.. .._T" */ |
0x39,0x38,0x00,0x70,0x0A,0x04,0x60,0xA4, /* 00000028 "98.p..`." */ |
}; |
unsigned char Ssdt2Code[] = /* Has method _T99 */ |
{ |
0x53,0x53,0x44,0x54,0x30,0x00,0x00,0x00, /* 00000000 "SSDT0..." */ |
0x01,0xB7,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 "..Intel." */ |
0x4D,0x61,0x6E,0x79,0x00,0x00,0x00,0x00, /* 00000010 "Many...." */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x24,0x04,0x03,0x20,0x14,0x0B,0x5F,0x54, /* 00000020 "$.. .._T" */ |
0x39,0x39,0x00,0x70,0x0A,0x04,0x60,0xA4, /* 00000028 "99.p..`." */ |
}; |
unsigned char Ssdt3Code[] = /* Has method _T97 */ |
{ |
0x54,0x53,0x44,0x54,0x30,0x00,0x00,0x00, /* 00000000 "TSDT0..." */ |
0x01,0xB8,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 "..Intel." */ |
0x4D,0x61,0x6E,0x79,0x00,0x00,0x00,0x00, /* 00000010 "Many...." */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x24,0x04,0x03,0x20,0x14,0x0B,0x5F,0x54, /* 00000020 "$.. .._T" */ |
0x39,0x37,0x00,0x70,0x0A,0x04,0x60,0xA4, /* 00000028 "97.p..`." */ |
}; |
/* Example OEM table */ |
unsigned char Oem1Code[] = |
{ |
0x4F,0x45,0x4D,0x31,0x38,0x00,0x00,0x00, /* 00000000 "OEM18..." */ |
0x01,0x4B,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 ".KIntel." */ |
0x4D,0x61,0x6E,0x79,0x00,0x00,0x00,0x00, /* 00000010 "Many...." */ |
0x01,0x00,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "....INTL" */ |
0x18,0x09,0x03,0x20,0x08,0x5F,0x58,0x54, /* 00000020 "... ._XT" */ |
0x32,0x0A,0x04,0x14,0x0C,0x5F,0x58,0x54, /* 00000028 "2...._XT" */ |
0x31,0x00,0x70,0x01,0x5F,0x58,0x54,0x32, /* 00000030 "1.p._XT2" */ |
}; |
/* ASL source for this table is at the end of this file */ |
unsigned char OemxCode[] = |
{ |
0x4F,0x45,0x4D,0x58,0xB0,0x00,0x00,0x00, /* 00000000 "OEMX...." */ |
0x02,0x54,0x4D,0x79,0x4F,0x45,0x4D,0x00, /* 00000008 ".TMyOEM." */ |
0x54,0x65,0x73,0x74,0x00,0x00,0x00,0x00, /* 00000010 "Test...." */ |
0x32,0x04,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "2...INTL" */ |
0x31,0x03,0x10,0x20,0x14,0x1D,0x5F,0x49, /* 00000020 "1.. .._I" */ |
0x4E,0x49,0x00,0x70,0x0D,0x54,0x61,0x62, /* 00000028 "NI.p.Tab" */ |
0x6C,0x65,0x20,0x4F,0x45,0x4D,0x58,0x20, /* 00000030 "le OEMX " */ |
0x72,0x75,0x6E,0x6E,0x69,0x6E,0x67,0x00, /* 00000038 "running." */ |
0x5B,0x31,0x10,0x22,0x5C,0x5F,0x47,0x50, /* 00000040 "[1."\_GP" */ |
0x45,0x14,0x06,0x5F,0x45,0x30,0x37,0x00, /* 00000048 "E.._E07." */ |
0x14,0x06,0x5F,0x45,0x32,0x32,0x00,0x14, /* 00000050 ".._E22.." */ |
0x06,0x5F,0x4C,0x33,0x31,0x00,0x14,0x06, /* 00000058 "._L31..." */ |
0x5F,0x4C,0x36,0x36,0x00,0x5B,0x82,0x10, /* 00000060 "_L66.[.." */ |
0x4F,0x45,0x4D,0x31,0x08,0x5F,0x50,0x52, /* 00000068 "OEM1._PR" */ |
0x57,0x12,0x05,0x02,0x0A,0x07,0x00,0x5B, /* 00000070 "W......[" */ |
0x82,0x10,0x4F,0x45,0x4D,0x32,0x08,0x5F, /* 00000078 "..OEM2._" */ |
0x50,0x52,0x57,0x12,0x05,0x02,0x0A,0x66, /* 00000080 "PRW....f" */ |
0x00,0x10,0x26,0x5C,0x47,0x50,0x45,0x32, /* 00000088 "..&\GPE2" */ |
0x14,0x06,0x5F,0x4C,0x30,0x31,0x00,0x14, /* 00000090 ".._L01.." */ |
0x06,0x5F,0x45,0x30,0x37,0x00,0x08,0x5F, /* 00000098 "._E07.._" */ |
0x50,0x52,0x57,0x12,0x0C,0x02,0x12,0x08, /* 000000A0 "PRW....." */ |
0x02,0x5C,0x47,0x50,0x45,0x32,0x01,0x00 /* 000000A8 ".\GPE2.." */ |
}; |
/* |
* Example installable control method |
* |
* DefinitionBlock ("", "DSDT", 2, "Intel", "MTHDTEST", 0x20090512) |
* { |
* Method (\_SI_._T97, 1, Serialized) |
* { |
* Store ("Example installed method", Debug) |
* Store (Arg0, Debug) |
* Return () |
* } |
* } |
* |
* Compiled byte code below. |
*/ |
unsigned char MethodCode[] = |
{ |
0x44,0x53,0x44,0x54,0x53,0x00,0x00,0x00, /* 00000000 "DSDTS..." */ |
0x02,0xF9,0x49,0x6E,0x74,0x65,0x6C,0x00, /* 00000008 "..Intel." */ |
0x4D,0x54,0x48,0x44,0x54,0x45,0x53,0x54, /* 00000010 "MTHDTEST" */ |
0x12,0x05,0x09,0x20,0x49,0x4E,0x54,0x4C, /* 00000018 "... INTL" */ |
0x22,0x04,0x09,0x20,0x14,0x2E,0x2E,0x5F, /* 00000020 "".. ..._" */ |
0x54,0x49,0x5F,0x5F,0x54,0x39,0x37,0x09, /* 00000028 "SI__T97." */ |
0x70,0x0D,0x45,0x78,0x61,0x6D,0x70,0x6C, /* 00000030 "p.Exampl" */ |
0x65,0x20,0x69,0x6E,0x73,0x74,0x61,0x6C, /* 00000038 "e instal" */ |
0x6C,0x65,0x64,0x20,0x6D,0x65,0x74,0x68, /* 00000040 "led meth" */ |
0x6F,0x64,0x00,0x5B,0x31,0x70,0x68,0x5B, /* 00000048 "od.[1ph[" */ |
0x31,0xA4,0x00, |
}; |
/* |
* We need a local FADT so that the hardware subcomponent will function, |
* even though the underlying OSD HW access functions don't do |
* anything. |
*/ |
ACPI_TABLE_HEADER *DsdtToInstallOverride; |
ACPI_TABLE_RSDP LocalRSDP; |
ACPI_TABLE_FADT LocalFADT; |
ACPI_TABLE_FACS LocalFACS; |
ACPI_TABLE_HEADER LocalTEST; |
ACPI_TABLE_HEADER LocalBADTABLE; |
ACPI_TABLE_RSDT *LocalRSDT; |
#define BASE_RSDT_TABLES 7 |
#define BASE_RSDT_SIZE (sizeof (ACPI_TABLE_RSDT) + ((BASE_RSDT_TABLES -1) * sizeof (UINT32))) |
#define ACPI_MAX_INIT_TABLES (32) |
static ACPI_TABLE_DESC Tables[ACPI_MAX_INIT_TABLES]; |
/****************************************************************************** |
* |
* FUNCTION: AeTableOverride |
* |
* DESCRIPTION: Local implementation of AcpiOsTableOverride. |
* Exercise the override mechanism |
* |
*****************************************************************************/ |
void |
AeTableOverride ( |
ACPI_TABLE_HEADER *ExistingTable, |
ACPI_TABLE_HEADER **NewTable) |
{ |
/* This code exercises the table override mechanism in the core */ |
if (ACPI_COMPARE_NAME (ExistingTable->Signature, ACPI_SIG_DSDT)) |
{ |
*NewTable = DsdtToInstallOverride; |
} |
/* This code tests override of dynamically loaded tables */ |
else if (ACPI_COMPARE_NAME (ExistingTable->Signature, "TSDT")) |
{ |
*NewTable = ACPI_CAST_PTR (ACPI_TABLE_HEADER, Ssdt3Code); |
} |
} |
/****************************************************************************** |
* |
* FUNCTION: AeBuildLocalTables |
* |
* PARAMETERS: TableCount - Number of tables on the command line |
* TableList - List of actual tables from files |
* |
* RETURN: Status |
* |
* DESCRIPTION: Build a complete ACPI table chain, with a local RSDP, RSDT, |
* FADT, and several other test tables. |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeBuildLocalTables ( |
UINT32 TableCount, |
AE_TABLE_DESC *TableList) |
{ |
ACPI_PHYSICAL_ADDRESS DsdtAddress = 0; |
UINT32 RsdtSize; |
AE_TABLE_DESC *NextTable; |
UINT32 NextIndex; |
ACPI_TABLE_FADT *ExternalFadt = NULL; |
/* |
* Update the table count. For DSDT, it is not put into the RSDT. For |
* FADT, this is already accounted for since we usually install a |
* local FADT. |
*/ |
NextTable = TableList; |
while (NextTable) |
{ |
if (ACPI_COMPARE_NAME (NextTable->Table->Signature, ACPI_SIG_DSDT) || |
ACPI_COMPARE_NAME (NextTable->Table->Signature, ACPI_SIG_FADT)) |
{ |
TableCount--; |
} |
NextTable = NextTable->Next; |
} |
RsdtSize = BASE_RSDT_SIZE + (TableCount * sizeof (UINT32)); |
/* Build an RSDT */ |
LocalRSDT = AcpiOsAllocate (RsdtSize); |
if (!LocalRSDT) |
{ |
return AE_NO_MEMORY; |
} |
ACPI_MEMSET (LocalRSDT, 0, RsdtSize); |
ACPI_STRNCPY (LocalRSDT->Header.Signature, ACPI_SIG_RSDT, 4); |
LocalRSDT->Header.Length = RsdtSize; |
LocalRSDT->TableOffsetEntry[0] = ACPI_PTR_TO_PHYSADDR (&LocalTEST); |
LocalRSDT->TableOffsetEntry[1] = ACPI_PTR_TO_PHYSADDR (&LocalBADTABLE); |
LocalRSDT->TableOffsetEntry[2] = ACPI_PTR_TO_PHYSADDR (&LocalFADT); |
/* Install two SSDTs to test multiple table support */ |
LocalRSDT->TableOffsetEntry[3] = ACPI_PTR_TO_PHYSADDR (&Ssdt1Code); |
LocalRSDT->TableOffsetEntry[4] = ACPI_PTR_TO_PHYSADDR (&Ssdt2Code); |
/* Install the OEM1 table to test LoadTable */ |
LocalRSDT->TableOffsetEntry[5] = ACPI_PTR_TO_PHYSADDR (&Oem1Code); |
/* Install the OEMx table to test LoadTable */ |
LocalRSDT->TableOffsetEntry[6] = ACPI_PTR_TO_PHYSADDR (&OemxCode); |
/* |
* Install the user tables. The DSDT must be installed in the FADT. |
* All other tables are installed directly into the RSDT. |
*/ |
NextIndex = BASE_RSDT_TABLES; |
NextTable = TableList; |
while (NextTable) |
{ |
/* |
* Incoming DSDT or FADT are special cases. All other tables are |
* just immediately installed into the RSDT. |
*/ |
if (ACPI_COMPARE_NAME (NextTable->Table->Signature, ACPI_SIG_DSDT)) |
{ |
if (DsdtAddress) |
{ |
printf ("Already found a DSDT, only one allowed\n"); |
return AE_ALREADY_EXISTS; |
} |
/* The incoming user table is a DSDT */ |
DsdtAddress = ACPI_PTR_TO_PHYSADDR (&DsdtCode); |
DsdtToInstallOverride = NextTable->Table; |
} |
else if (ACPI_COMPARE_NAME (NextTable->Table->Signature, ACPI_SIG_FADT)) |
{ |
ExternalFadt = ACPI_CAST_PTR (ACPI_TABLE_FADT, NextTable->Table); |
LocalRSDT->TableOffsetEntry[2] = ACPI_PTR_TO_PHYSADDR (NextTable->Table); |
} |
else |
{ |
/* Install the table in the RSDT */ |
LocalRSDT->TableOffsetEntry[NextIndex] = ACPI_PTR_TO_PHYSADDR (NextTable->Table); |
NextIndex++; |
} |
NextTable = NextTable->Next; |
} |
/* Build an RSDP */ |
ACPI_MEMSET (&LocalRSDP, 0, sizeof (ACPI_TABLE_RSDP)); |
ACPI_MEMCPY (LocalRSDP.Signature, ACPI_SIG_RSDP, 8); |
ACPI_MEMCPY (LocalRSDP.OemId, "I_TEST", 6); |
LocalRSDP.Revision = 1; |
LocalRSDP.RsdtPhysicalAddress = ACPI_PTR_TO_PHYSADDR (LocalRSDT); |
LocalRSDP.Length = sizeof (ACPI_TABLE_RSDT); |
/* Set checksums for both RSDT and RSDP */ |
LocalRSDT->Header.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) LocalRSDT, LocalRSDT->Header.Length); |
LocalRSDP.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) &LocalRSDP, ACPI_RSDP_CHECKSUM_LENGTH); |
if (!DsdtAddress) |
{ |
/* Use the local DSDT because incoming table(s) are all SSDT(s) */ |
DsdtAddress = ACPI_PTR_TO_PHYSADDR (LocalDsdtCode); |
DsdtToInstallOverride = ACPI_CAST_PTR (ACPI_TABLE_HEADER, LocalDsdtCode); |
} |
if (ExternalFadt) |
{ |
/* |
* Use the external FADT, but we must update the DSDT/FACS addresses |
* as well as the checksum |
*/ |
ExternalFadt->Dsdt = DsdtAddress; |
ExternalFadt->Facs = ACPI_PTR_TO_PHYSADDR (&LocalFACS); |
if (ExternalFadt->Header.Length > ACPI_PTR_DIFF (&ExternalFadt->XDsdt, ExternalFadt)) |
{ |
ExternalFadt->XDsdt = DsdtAddress; |
ExternalFadt->XFacs = ACPI_PTR_TO_PHYSADDR (&LocalFACS); |
} |
/* Complete the FADT with the checksum */ |
ExternalFadt->Header.Checksum = 0; |
ExternalFadt->Header.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) ExternalFadt, ExternalFadt->Header.Length); |
} |
else |
{ |
/* |
* Build a local FADT so we can test the hardware/event init |
*/ |
ACPI_MEMSET (&LocalFADT, 0, sizeof (ACPI_TABLE_FADT)); |
ACPI_STRNCPY (LocalFADT.Header.Signature, ACPI_SIG_FADT, 4); |
/* Setup FADT header and DSDT/FACS addresses */ |
LocalFADT.Dsdt = DsdtAddress; |
LocalFADT.Facs = ACPI_PTR_TO_PHYSADDR (&LocalFACS); |
LocalFADT.XDsdt = DsdtAddress; |
LocalFADT.XFacs = ACPI_PTR_TO_PHYSADDR (&LocalFACS); |
LocalFADT.Header.Revision = 3; |
LocalFADT.Header.Length = sizeof (ACPI_TABLE_FADT); |
/* Miscellaneous FADT fields */ |
LocalFADT.Gpe0BlockLength = 16; |
LocalFADT.Gpe1BlockLength = 6; |
LocalFADT.Gpe1Base = 96; |
LocalFADT.Pm1EventLength = 4; |
LocalFADT.Pm1ControlLength = 2; |
LocalFADT.PmTimerLength = 4; |
LocalFADT.Gpe0Block = 0x00001234; |
LocalFADT.Gpe1Block = 0x00005678; |
LocalFADT.Pm1aEventBlock = 0x00001aaa; |
LocalFADT.Pm1bEventBlock = 0x00001bbb; |
LocalFADT.PmTimerBlock = 0xA0; |
LocalFADT.Pm1aControlBlock = 0xB0; |
/* Setup one example X-64 field */ |
LocalFADT.XPm1bEventBlock.SpaceId = ACPI_ADR_SPACE_SYSTEM_IO; |
LocalFADT.XPm1bEventBlock.Address = LocalFADT.Pm1bEventBlock; |
LocalFADT.XPm1bEventBlock.BitWidth = (UINT8) ACPI_MUL_8 (LocalFADT.Pm1EventLength); |
/* Complete the FADT with the checksum */ |
LocalFADT.Header.Checksum = 0; |
LocalFADT.Header.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) &LocalFADT, LocalFADT.Header.Length); |
} |
/* Build a FACS */ |
ACPI_MEMSET (&LocalFACS, 0, sizeof (ACPI_TABLE_FACS)); |
ACPI_STRNCPY (LocalFACS.Signature, ACPI_SIG_FACS, 4); |
LocalFACS.Length = sizeof (ACPI_TABLE_FACS); |
LocalFACS.GlobalLock = 0x11AA0011; |
/* Build a fake table [TEST] so that we make sure that the CA core ignores it */ |
ACPI_MEMSET (&LocalTEST, 0, sizeof (ACPI_TABLE_HEADER)); |
ACPI_STRNCPY (LocalTEST.Signature, "TEST", 4); |
LocalTEST.Revision = 1; |
LocalTEST.Length = sizeof (ACPI_TABLE_HEADER); |
LocalTEST.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) &LocalTEST, LocalTEST.Length); |
/* Build a fake table with a bad signature [BAD!] so that we make sure that the CA core ignores it */ |
ACPI_MEMSET (&LocalBADTABLE, 0, sizeof (ACPI_TABLE_HEADER)); |
ACPI_STRNCPY (LocalBADTABLE.Signature, "BAD!", 4); |
LocalBADTABLE.Revision = 1; |
LocalBADTABLE.Length = sizeof (ACPI_TABLE_HEADER); |
LocalBADTABLE.Checksum = (UINT8) -AcpiTbChecksum ( |
(void *) &LocalBADTABLE, LocalBADTABLE.Length); |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeInstallTables |
* |
* PARAMETERS: None |
* |
* RETURN: Status |
* |
* DESCRIPTION: Install the various ACPI tables |
* |
*****************************************************************************/ |
ACPI_STATUS |
AeInstallTables ( |
void) |
{ |
ACPI_STATUS Status; |
Status = AcpiInitializeTables (Tables, ACPI_MAX_INIT_TABLES, TRUE); |
Status = AcpiReallocateRootTable (); |
Status = AcpiLoadTables (); |
/* |
* Test run-time control method installation. Do it twice to test code |
* for an existing name. |
*/ |
Status = AcpiInstallMethod (MethodCode); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("%s, Could not install method\n", |
AcpiFormatException (Status)); |
} |
Status = AcpiInstallMethod (MethodCode); |
if (ACPI_FAILURE (Status)) |
{ |
AcpiOsPrintf ("%s, Could not install method\n", |
AcpiFormatException (Status)); |
} |
return (AE_OK); |
} |
/****************************************************************************** |
* |
* FUNCTION: AeLocalGetRootPointer |
* |
* PARAMETERS: Flags - not used |
* Address - Where the root pointer is returned |
* |
* RETURN: Status |
* |
* DESCRIPTION: Return a local RSDP, used to dynamically load tables via the |
* standard ACPI mechanism. |
* |
*****************************************************************************/ |
ACPI_PHYSICAL_ADDRESS |
AeLocalGetRootPointer ( |
void) |
{ |
return ((ACPI_PHYSICAL_ADDRESS) &LocalRSDP); |
} |
#if 0 |
/****************************************************************************** |
* |
* DESCRIPTION: ASL tables that are used in RSDT/XSDT, also used to test |
* Load/LoadTable operators. |
* |
*****************************************************************************/ |
DefinitionBlock ("", "OEMX", 2, "MyOEM", "Test", 0x00000432) |
{ |
External (GPE2, DeviceObj) |
Method (_INI) |
{ |
Store ("Table OEMX running", Debug) |
} |
Scope (\_GPE) |
{ |
Method (_E07) {} |
Method (_E22) {} |
Method (_L31) {} |
Method (_L66) {} |
} |
Device (OEM1) |
{ |
Name (_PRW, Package(){7,0}) |
} |
Device (OEM2) |
{ |
Name (_PRW, Package(){0x66,0}) |
} |
Scope (\GPE2) |
{ |
Method (_L01) {} |
Method (_E07) {} |
Name (_PRW, Package() {Package() {\GPE2, 1}, 0}) |
} |
} |
/* Parent gr.asl file */ |
DefinitionBlock ("", "DSDT", 2, "Intel", "Many", 0x00000001) |
{ |
Name (BUF1, Buffer() |
{ |
0x4F,0x45,0x4D,0x58,0xB0,0x00,0x00,0x00, /* 00000000 "OEMX...." */ |
0x02,0x54,0x4D,0x79,0x4F,0x45,0x4D,0x00, /* 00000008 ".TMyOEM." */ |
0x54,0x65,0x73,0x74,0x00,0x00,0x00,0x00, /* 00000010 "Test...." */ |
0x32,0x04,0x00,0x00,0x49,0x4E,0x54,0x4C, /* 00000018 "2...INTL" */ |
0x31,0x03,0x10,0x20,0x14,0x1D,0x5F,0x49, /* 00000020 "1.. .._I" */ |
0x4E,0x49,0x00,0x70,0x0D,0x54,0x61,0x62, /* 00000028 "NI.p.Tab" */ |
0x6C,0x65,0x20,0x4F,0x45,0x4D,0x58,0x20, /* 00000030 "le OEMX " */ |
0x72,0x75,0x6E,0x6E,0x69,0x6E,0x67,0x00, /* 00000038 "running." */ |
0x5B,0x31,0x10,0x22,0x5C,0x5F,0x47,0x50, /* 00000040 "[1."\_GP" */ |
0x45,0x14,0x06,0x5F,0x45,0x30,0x37,0x00, /* 00000048 "E.._E07." */ |
0x14,0x06,0x5F,0x45,0x32,0x32,0x00,0x14, /* 00000050 ".._E22.." */ |
0x06,0x5F,0x4C,0x33,0x31,0x00,0x14,0x06, /* 00000058 "._L31..." */ |
0x5F,0x4C,0x36,0x36,0x00,0x5B,0x82,0x10, /* 00000060 "_L66.[.." */ |
0x4F,0x45,0x4D,0x31,0x08,0x5F,0x50,0x52, /* 00000068 "OEM1._PR" */ |
0x57,0x12,0x05,0x02,0x0A,0x07,0x00,0x5B, /* 00000070 "W......[" */ |
0x82,0x10,0x4F,0x45,0x4D,0x32,0x08,0x5F, /* 00000078 "..OEM2._" */ |
0x50,0x52,0x57,0x12,0x05,0x02,0x0A,0x66, /* 00000080 "PRW....f" */ |
0x00,0x10,0x26,0x5C,0x47,0x50,0x45,0x32, /* 00000088 "..&\GPE2" */ |
0x14,0x06,0x5F,0x4C,0x30,0x31,0x00,0x14, /* 00000090 ".._L01.." */ |
0x06,0x5F,0x45,0x30,0x37,0x00,0x08,0x5F, /* 00000098 "._E07.._" */ |
0x50,0x52,0x57,0x12,0x0C,0x02,0x12,0x08, /* 000000A0 "PRW....." */ |
0x02,0x5C,0x47,0x50,0x45,0x32,0x01,0x00 /* 000000A8 ".\GPE2.." */ |
}) |
Name (HNDL, 0) |
Method (LD) |
{ |
Load (BUF1, HNDL) |
Store ("Load operator, handle:", Debug) |
Store (HNDL, Debug) |
} |
Method (MAIN, 0, NotSerialized) |
{ |
Store ("Loading OEMX table", Debug) |
Store (LoadTable ("OEMX", "MyOEM", "Test"), Debug) |
} |
Scope (\_GPE) |
{ |
Method (_L08) {} |
Method (_E08) {} |
Method (_L0B) {} |
} |
Device (DEV0) |
{ |
Name (_PRW, Package() {0x11, 0}) |
} |
Device (\GPE2) |
{ |
Method (_L00) {} |
} |
} |
#endif |
/drivers/devman/acpica/tools/acpiexec/aetables.o |
---|
Cannot display: file marked as a binary type. |
svn:mime-type = application/octet-stream |
Property changes: |
Added: svn:mime-type |
+application/octet-stream |
\ No newline at end of property |
/drivers/devman/acpica/tools/acpiexec/osunixdir.c |
---|
0,0 → 1,306 |
/****************************************************************************** |
* |
* Module Name: osunixdir - Unix directory access interfaces |
* |
*****************************************************************************/ |
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
#include <stdio.h> |
#include <stdlib.h> |
#include <string.h> |
#include <dirent.h> |
#include <fnmatch.h> |
#include <ctype.h> |
#include <sys/stat.h> |
#include "acpisrc.h" |
typedef struct ExternalFindInfo |
{ |
char *DirPathname; |
DIR *DirPtr; |
char temp_buffer[128]; |
char *WildcardSpec; |
char RequestedFileType; |
} EXTERNAL_FIND_INFO; |
/******************************************************************************* |
* |
* FUNCTION: AcpiOsOpenDirectory |
* |
* PARAMETERS: DirPathname - Full pathname to the directory |
* WildcardSpec - string of the form "*.c", etc. |
* |
* RETURN: A directory "handle" to be used in subsequent search operations. |
* NULL returned on failure. |
* |
* DESCRIPTION: Open a directory in preparation for a wildcard search |
* |
******************************************************************************/ |
void * |
AcpiOsOpenDirectory ( |
char *DirPathname, |
char *WildcardSpec, |
char RequestedFileType) |
{ |
EXTERNAL_FIND_INFO *ExternalInfo; |
DIR *dir; |
/* Allocate the info struct that will be returned to the caller */ |
ExternalInfo = calloc (sizeof (EXTERNAL_FIND_INFO), 1); |
if (!ExternalInfo) |
{ |
return (NULL); |
} |
/* Get the directory stream */ |
dir = opendir (DirPathname); |
if (!dir) |
{ |
free (ExternalInfo); |
return (NULL); |
} |
/* Save the info in the return structure */ |
ExternalInfo->WildcardSpec = WildcardSpec; |
ExternalInfo->RequestedFileType = RequestedFileType; |
ExternalInfo->DirPathname = DirPathname; |
ExternalInfo->DirPtr = dir; |
return (ExternalInfo); |
} |
/******************************************************************************* |
* |
* FUNCTION: AcpiOsGetNextFilename |
* |
* PARAMETERS: DirHandle - Created via AcpiOsOpenDirectory |
* |
* RETURN: Next filename matched. NULL if no more matches. |
* |
* DESCRIPTION: Get the next file in the directory that matches the wildcard |
* specification. |
* |
******************************************************************************/ |
char * |
AcpiOsGetNextFilename ( |
void *DirHandle) |
{ |
EXTERNAL_FIND_INFO *ExternalInfo = DirHandle; |
struct dirent *dir_entry; |
char *temp_str; |
int str_len; |
struct stat temp_stat; |
int err; |
while ((dir_entry = readdir (ExternalInfo->DirPtr))) |
{ |
if (!fnmatch (ExternalInfo->WildcardSpec, dir_entry->d_name, 0)) |
{ |
if (dir_entry->d_name[0] == '.') |
continue; |
str_len = strlen (dir_entry->d_name) + |
strlen (ExternalInfo->DirPathname) + 2; |
temp_str = calloc (str_len, 1); |
if (!temp_str) |
{ |
printf ("Could not allocate buffer for temporary string\n"); |
return NULL; |
} |
strcpy (temp_str, ExternalInfo->DirPathname); |
strcat (temp_str, "/"); |
strcat (temp_str, dir_entry->d_name); |
err = stat (temp_str, &temp_stat); |
free (temp_str); |
if (err == -1) |
{ |
printf ("stat() error - should not happen\n"); |
return NULL; |
} |
if ((S_ISDIR (temp_stat.st_mode) |
&& (ExternalInfo->RequestedFileType == REQUEST_DIR_ONLY)) |
|| |
((!S_ISDIR (temp_stat.st_mode) |
&& ExternalInfo->RequestedFileType == REQUEST_FILE_ONLY))) |
{ |
/* copy to a temp buffer because dir_entry struct is on the stack */ |
strcpy (ExternalInfo->temp_buffer, dir_entry->d_name); |
return (ExternalInfo->temp_buffer); |
} |
} |
} |
return NULL; |
} |
/******************************************************************************* |
* |
* FUNCTION: AcpiOsCloseDirectory |
* |
* PARAMETERS: DirHandle - Created via AcpiOsOpenDirectory |
* |
* RETURN: None. |
* |
* DESCRIPTION: Close the open directory and cleanup. |
* |
******************************************************************************/ |
void |
AcpiOsCloseDirectory ( |
void *DirHandle) |
{ |
EXTERNAL_FIND_INFO *ExternalInfo = DirHandle; |
/* Close the directory and free allocations */ |
closedir (ExternalInfo->DirPtr); |
free (DirHandle); |
} |
/* Other functions acpisrc uses but that aren't standard on Unix */ |
/* lowercase a string */ |
char* |
strlwr ( |
char *str) |
{ |
int length; |
int i; |
length = strlen (str); |
for (i = 0; i < length; i++) |
{ |
str[i] = tolower ((int) str[i]); |
} |
return (str); |
} |