0,0 → 1,1162 |
/****************************************************************************** |
* |
* Name: actbl2.h - ACPI Specification Revision 2.0 Tables |
* |
*****************************************************************************/ |
|
/****************************************************************************** |
* |
* 1. Copyright Notice |
* |
* Some or all of this work - Copyright (c) 1999 - 2010, Intel Corp. |
* All rights reserved. |
* |
* 2. License |
* |
* 2.1. This is your license from Intel Corp. under its intellectual property |
* rights. You may have additional license terms from the party that provided |
* you this software, covering your right to use that party's intellectual |
* property rights. |
* |
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a |
* copy of the source code appearing in this file ("Covered Code") an |
* irrevocable, perpetual, worldwide license under Intel's copyrights in the |
* base code distributed originally by Intel ("Original Intel Code") to copy, |
* make derivatives, distribute, use and display any portion of the Covered |
* Code in any form, with the right to sublicense such rights; and |
* |
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent |
* license (with the right to sublicense), under only those claims of Intel |
* patents that are infringed by the Original Intel Code, to make, use, sell, |
* offer to sell, and import the Covered Code and derivative works thereof |
* solely to the minimum extent necessary to exercise the above copyright |
* license, and in no event shall the patent license extend to any additions |
* to or modifications of the Original Intel Code. No other license or right |
* is granted directly or by implication, estoppel or otherwise; |
* |
* The above copyright and patent license is granted only if the following |
* conditions are met: |
* |
* 3. Conditions |
* |
* 3.1. Redistribution of Source with Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification with rights to further distribute source must include |
* the above Copyright Notice, the above License, this list of Conditions, |
* and the following Disclaimer and Export Compliance provision. In addition, |
* Licensee must cause all Covered Code to which Licensee contributes to |
* contain a file documenting the changes Licensee made to create that Covered |
* Code and the date of any change. Licensee must include in that file the |
* documentation of any changes made by any predecessor Licensee. Licensee |
* must include a prominent statement that the modification is derived, |
* directly or indirectly, from Original Intel Code. |
* |
* 3.2. Redistribution of Source with no Rights to Further Distribute Source. |
* Redistribution of source code of any substantial portion of the Covered |
* Code or modification without rights to further distribute source must |
* include the following Disclaimer and Export Compliance provision in the |
* documentation and/or other materials provided with distribution. In |
* addition, Licensee may not authorize further sublicense of source of any |
* portion of the Covered Code, and must include terms to the effect that the |
* license from Licensee to its licensee is limited to the intellectual |
* property embodied in the software Licensee provides to its licensee, and |
* not to intellectual property embodied in modifications its licensee may |
* make. |
* |
* 3.3. Redistribution of Executable. Redistribution in executable form of any |
* substantial portion of the Covered Code or modification must reproduce the |
* above Copyright Notice, and the following Disclaimer and Export Compliance |
* provision in the documentation and/or other materials provided with the |
* distribution. |
* |
* 3.4. Intel retains all right, title, and interest in and to the Original |
* Intel Code. |
* |
* 3.5. Neither the name Intel nor any other trademark owned or controlled by |
* Intel shall be used in advertising or otherwise to promote the sale, use or |
* other dealings in products derived from or relating to the Covered Code |
* without prior written authorization from Intel. |
* |
* 4. Disclaimer and Export Compliance |
* |
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED |
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE |
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE, |
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY |
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY |
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A |
* PARTICULAR PURPOSE. |
* |
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES |
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR |
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT, |
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY |
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL |
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS |
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY |
* LIMITED REMEDY. |
* |
* 4.3. Licensee shall not export, either directly or indirectly, any of this |
* software or system incorporating such software without first obtaining any |
* required license or other approval from the U. S. Department of Commerce or |
* any other agency or department of the United States Government. In the |
* event Licensee exports any such software from the United States or |
* re-exports any such software from a foreign destination, Licensee shall |
* ensure that the distribution and export/re-export of the software is in |
* compliance with all laws, regulations, orders, or other restrictions of the |
* U.S. Export Administration Regulations. Licensee agrees that neither it nor |
* any of its subsidiaries will export/re-export any technical data, process, |
* software, or service, directly or indirectly, to any country for which the |
* United States government or any agency thereof requires an export license, |
* other governmental approval, or letter of assurance, without first obtaining |
* such license, approval or letter. |
* |
*****************************************************************************/ |
|
#ifndef __ACTBL2_H__ |
#define __ACTBL2_H__ |
|
|
/******************************************************************************* |
* |
* Additional ACPI Tables (2) |
* |
* These tables are not consumed directly by the ACPICA subsystem, but are |
* included here to support device drivers and the AML disassembler. |
* |
* The tables in this file are defined by third-party specifications, and are |
* not defined directly by the ACPI specification itself. |
* |
******************************************************************************/ |
|
|
/* |
* Values for description table header signatures for tables defined in this |
* file. Useful because they make it more difficult to inadvertently type in |
* the wrong signature. |
*/ |
#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */ |
#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ |
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */ |
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */ |
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */ |
#define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */ |
#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */ |
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */ |
#define ACPI_SIG_MCHI "MCHI" /* Management Controller Host Interface table */ |
#define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */ |
#define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */ |
#define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */ |
#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */ |
#define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */ |
#define ACPI_SIG_WAET "WAET" /* Windows ACPI Emulated devices Table */ |
#define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */ |
#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */ |
|
#ifdef ACPI_UNDEFINED_TABLES |
/* |
* These tables have been seen in the field, but no definition has been found |
*/ |
#define ACPI_SIG_ATKG "ATKG" |
#define ACPI_SIG_GSCI "GSCI" /* GMCH SCI table */ |
#define ACPI_SIG_IEIT "IEIT" |
#endif |
|
/* |
* All tables must be byte-packed to match the ACPI specification, since |
* the tables are provided by the system BIOS. |
*/ |
#pragma pack(1) |
|
/* |
* Note about bitfields: The UINT8 type is used for bitfields in ACPI tables. |
* This is the only type that is even remotely portable. Anything else is not |
* portable, so do not use any other bitfield types. |
*/ |
|
|
/******************************************************************************* |
* |
* ASF - Alert Standard Format table (Signature "ASF!") |
* Revision 0x10 |
* |
* Conforms to the Alert Standard Format Specification V2.0, 23 April 2003 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_asf |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
|
} ACPI_TABLE_ASF; |
|
|
/* ASF subtable header */ |
|
typedef struct acpi_asf_header |
{ |
UINT8 Type; |
UINT8 Reserved; |
UINT16 Length; |
|
} ACPI_ASF_HEADER; |
|
|
/* Values for Type field above */ |
|
enum AcpiAsfType |
{ |
ACPI_ASF_TYPE_INFO = 0, |
ACPI_ASF_TYPE_ALERT = 1, |
ACPI_ASF_TYPE_CONTROL = 2, |
ACPI_ASF_TYPE_BOOT = 3, |
ACPI_ASF_TYPE_ADDRESS = 4, |
ACPI_ASF_TYPE_RESERVED = 5 |
}; |
|
/* |
* ASF subtables |
*/ |
|
/* 0: ASF Information */ |
|
typedef struct acpi_asf_info |
{ |
ACPI_ASF_HEADER Header; |
UINT8 MinResetValue; |
UINT8 MinPollInterval; |
UINT16 SystemId; |
UINT32 MfgId; |
UINT8 Flags; |
UINT8 Reserved2[3]; |
|
} ACPI_ASF_INFO; |
|
/* Masks for Flags field above */ |
|
#define ACPI_ASF_SMBUS_PROTOCOLS (1) |
|
|
/* 1: ASF Alerts */ |
|
typedef struct acpi_asf_alert |
{ |
ACPI_ASF_HEADER Header; |
UINT8 AssertMask; |
UINT8 DeassertMask; |
UINT8 Alerts; |
UINT8 DataLength; |
|
} ACPI_ASF_ALERT; |
|
typedef struct acpi_asf_alert_data |
{ |
UINT8 Address; |
UINT8 Command; |
UINT8 Mask; |
UINT8 Value; |
UINT8 SensorType; |
UINT8 Type; |
UINT8 Offset; |
UINT8 SourceType; |
UINT8 Severity; |
UINT8 SensorNumber; |
UINT8 Entity; |
UINT8 Instance; |
|
} ACPI_ASF_ALERT_DATA; |
|
|
/* 2: ASF Remote Control */ |
|
typedef struct acpi_asf_remote |
{ |
ACPI_ASF_HEADER Header; |
UINT8 Controls; |
UINT8 DataLength; |
UINT16 Reserved2; |
|
} ACPI_ASF_REMOTE; |
|
typedef struct acpi_asf_control_data |
{ |
UINT8 Function; |
UINT8 Address; |
UINT8 Command; |
UINT8 Value; |
|
} ACPI_ASF_CONTROL_DATA; |
|
|
/* 3: ASF RMCP Boot Options */ |
|
typedef struct acpi_asf_rmcp |
{ |
ACPI_ASF_HEADER Header; |
UINT8 Capabilities[7]; |
UINT8 CompletionCode; |
UINT32 EnterpriseId; |
UINT8 Command; |
UINT16 Parameter; |
UINT16 BootOptions; |
UINT16 OemParameters; |
|
} ACPI_ASF_RMCP; |
|
|
/* 4: ASF Address */ |
|
typedef struct acpi_asf_address |
{ |
ACPI_ASF_HEADER Header; |
UINT8 EpromAddress; |
UINT8 Devices; |
|
} ACPI_ASF_ADDRESS; |
|
|
/******************************************************************************* |
* |
* BOOT - Simple Boot Flag Table |
* Version 1 |
* |
* Conforms to the "Simple Boot Flag Specification", Version 2.1 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_boot |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 CmosIndex; /* Index in CMOS RAM for the boot register */ |
UINT8 Reserved[3]; |
|
} ACPI_TABLE_BOOT; |
|
|
/******************************************************************************* |
* |
* DBGP - Debug Port table |
* Version 1 |
* |
* Conforms to the "Debug Port Specification", Version 1.00, 2/9/2000 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_dbgp |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 Type; /* 0=full 16550, 1=subset of 16550 */ |
UINT8 Reserved[3]; |
ACPI_GENERIC_ADDRESS DebugPort; |
|
} ACPI_TABLE_DBGP; |
|
|
/******************************************************************************* |
* |
* DMAR - DMA Remapping table |
* Version 1 |
* |
* Conforms to "Intel Virtualization Technology for Directed I/O", |
* Version 1.2, Sept. 2008 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_dmar |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 Width; /* Host Address Width */ |
UINT8 Flags; |
UINT8 Reserved[10]; |
|
} ACPI_TABLE_DMAR; |
|
/* Masks for Flags field above */ |
|
#define ACPI_DMAR_INTR_REMAP (1) |
|
|
/* DMAR subtable header */ |
|
typedef struct acpi_dmar_header |
{ |
UINT16 Type; |
UINT16 Length; |
|
} ACPI_DMAR_HEADER; |
|
/* Values for subtable type in ACPI_DMAR_HEADER */ |
|
enum AcpiDmarType |
{ |
ACPI_DMAR_TYPE_HARDWARE_UNIT = 0, |
ACPI_DMAR_TYPE_RESERVED_MEMORY = 1, |
ACPI_DMAR_TYPE_ATSR = 2, |
ACPI_DMAR_HARDWARE_AFFINITY = 3, |
ACPI_DMAR_TYPE_RESERVED = 4 /* 4 and greater are reserved */ |
}; |
|
|
/* DMAR Device Scope structure */ |
|
typedef struct acpi_dmar_device_scope |
{ |
UINT8 EntryType; |
UINT8 Length; |
UINT16 Reserved; |
UINT8 EnumerationId; |
UINT8 Bus; |
|
} ACPI_DMAR_DEVICE_SCOPE; |
|
/* Values for EntryType in ACPI_DMAR_DEVICE_SCOPE */ |
|
enum AcpiDmarScopeType |
{ |
ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0, |
ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1, |
ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2, |
ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3, |
ACPI_DMAR_SCOPE_TYPE_HPET = 4, |
ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */ |
}; |
|
typedef struct acpi_dmar_pci_path |
{ |
UINT8 Device; |
UINT8 Function; |
|
} ACPI_DMAR_PCI_PATH; |
|
|
/* |
* DMAR Sub-tables, correspond to Type in ACPI_DMAR_HEADER |
*/ |
|
/* 0: Hardware Unit Definition */ |
|
typedef struct acpi_dmar_hardware_unit |
{ |
ACPI_DMAR_HEADER Header; |
UINT8 Flags; |
UINT8 Reserved; |
UINT16 Segment; |
UINT64 Address; /* Register Base Address */ |
|
} ACPI_DMAR_HARDWARE_UNIT; |
|
/* Masks for Flags field above */ |
|
#define ACPI_DMAR_INCLUDE_ALL (1) |
|
|
/* 1: Reserved Memory Defininition */ |
|
typedef struct acpi_dmar_reserved_memory |
{ |
ACPI_DMAR_HEADER Header; |
UINT16 Reserved; |
UINT16 Segment; |
UINT64 BaseAddress; /* 4K aligned base address */ |
UINT64 EndAddress; /* 4K aligned limit address */ |
|
} ACPI_DMAR_RESERVED_MEMORY; |
|
/* Masks for Flags field above */ |
|
#define ACPI_DMAR_ALLOW_ALL (1) |
|
|
/* 2: Root Port ATS Capability Reporting Structure */ |
|
typedef struct acpi_dmar_atsr |
{ |
ACPI_DMAR_HEADER Header; |
UINT8 Flags; |
UINT8 Reserved; |
UINT16 Segment; |
|
} ACPI_DMAR_ATSR; |
|
/* Masks for Flags field above */ |
|
#define ACPI_DMAR_ALL_PORTS (1) |
|
|
/* 3: Remapping Hardware Static Affinity Structure */ |
|
typedef struct acpi_dmar_rhsa |
{ |
ACPI_DMAR_HEADER Header; |
UINT32 Reserved; |
UINT64 BaseAddress; |
UINT32 ProximityDomain; |
|
} ACPI_DMAR_RHSA; |
|
|
/******************************************************************************* |
* |
* HPET - High Precision Event Timer table |
* Version 1 |
* |
* Conforms to "IA-PC HPET (High Precision Event Timers) Specification", |
* Version 1.0a, October 2004 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_hpet |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT32 Id; /* Hardware ID of event timer block */ |
ACPI_GENERIC_ADDRESS Address; /* Address of event timer block */ |
UINT8 Sequence; /* HPET sequence number */ |
UINT16 MinimumTick; /* Main counter min tick, periodic mode */ |
UINT8 Flags; |
|
} ACPI_TABLE_HPET; |
|
/* Masks for Flags field above */ |
|
#define ACPI_HPET_PAGE_PROTECT_MASK (3) |
|
/* Values for Page Protect flags */ |
|
enum AcpiHpetPageProtect |
{ |
ACPI_HPET_NO_PAGE_PROTECT = 0, |
ACPI_HPET_PAGE_PROTECT4 = 1, |
ACPI_HPET_PAGE_PROTECT64 = 2 |
}; |
|
|
/******************************************************************************* |
* |
* IBFT - Boot Firmware Table |
* Version 1 |
* |
* Conforms to "iSCSI Boot Firmware Table (iBFT) as Defined in ACPI 3.0b |
* Specification", Version 1.01, March 1, 2007 |
* |
* Note: It appears that this table is not intended to appear in the RSDT/XSDT. |
* Therefore, it is not currently supported by the disassembler. |
* |
******************************************************************************/ |
|
typedef struct acpi_table_ibft |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 Reserved[12]; |
|
} ACPI_TABLE_IBFT; |
|
|
/* IBFT common subtable header */ |
|
typedef struct acpi_ibft_header |
{ |
UINT8 Type; |
UINT8 Version; |
UINT16 Length; |
UINT8 Index; |
UINT8 Flags; |
|
} ACPI_IBFT_HEADER; |
|
/* Values for Type field above */ |
|
enum AcpiIbftType |
{ |
ACPI_IBFT_TYPE_NOT_USED = 0, |
ACPI_IBFT_TYPE_CONTROL = 1, |
ACPI_IBFT_TYPE_INITIATOR = 2, |
ACPI_IBFT_TYPE_NIC = 3, |
ACPI_IBFT_TYPE_TARGET = 4, |
ACPI_IBFT_TYPE_EXTENSIONS = 5, |
ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */ |
}; |
|
|
/* IBFT subtables */ |
|
typedef struct acpi_ibft_control |
{ |
ACPI_IBFT_HEADER Header; |
UINT16 Extensions; |
UINT16 InitiatorOffset; |
UINT16 Nic0Offset; |
UINT16 Target0Offset; |
UINT16 Nic1Offset; |
UINT16 Target1Offset; |
|
} ACPI_IBFT_CONTROL; |
|
typedef struct acpi_ibft_initiator |
{ |
ACPI_IBFT_HEADER Header; |
UINT8 SnsServer[16]; |
UINT8 SlpServer[16]; |
UINT8 PrimaryServer[16]; |
UINT8 SecondaryServer[16]; |
UINT16 NameLength; |
UINT16 NameOffset; |
|
} ACPI_IBFT_INITIATOR; |
|
typedef struct acpi_ibft_nic |
{ |
ACPI_IBFT_HEADER Header; |
UINT8 IpAddress[16]; |
UINT8 SubnetMaskPrefix; |
UINT8 Origin; |
UINT8 Gateway[16]; |
UINT8 PrimaryDns[16]; |
UINT8 SecondaryDns[16]; |
UINT8 Dhcp[16]; |
UINT16 Vlan; |
UINT8 MacAddress[6]; |
UINT16 PciAddress; |
UINT16 NameLength; |
UINT16 NameOffset; |
|
} ACPI_IBFT_NIC; |
|
typedef struct acpi_ibft_target |
{ |
ACPI_IBFT_HEADER Header; |
UINT8 TargetIpAddress[16]; |
UINT16 TargetIpSocket; |
UINT8 TargetBootLun[8]; |
UINT8 ChapType; |
UINT8 NicAssociation; |
UINT16 TargetNameLength; |
UINT16 TargetNameOffset; |
UINT16 ChapNameLength; |
UINT16 ChapNameOffset; |
UINT16 ChapSecretLength; |
UINT16 ChapSecretOffset; |
UINT16 ReverseChapNameLength; |
UINT16 ReverseChapNameOffset; |
UINT16 ReverseChapSecretLength; |
UINT16 ReverseChapSecretOffset; |
|
} ACPI_IBFT_TARGET; |
|
|
/******************************************************************************* |
* |
* IVRS - I/O Virtualization Reporting Structure |
* Version 1 |
* |
* Conforms to "AMD I/O Virtualization Technology (IOMMU) Specification", |
* Revision 1.26, February 2009. |
* |
******************************************************************************/ |
|
typedef struct acpi_table_ivrs |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT32 Info; /* Common virtualization info */ |
UINT64 Reserved; |
|
} ACPI_TABLE_IVRS; |
|
/* Values for Info field above */ |
|
#define ACPI_IVRS_PHYSICAL_SIZE 0x00007F00 /* 7 bits, physical address size */ |
#define ACPI_IVRS_VIRTUAL_SIZE 0x003F8000 /* 7 bits, virtual address size */ |
#define ACPI_IVRS_ATS_RESERVED 0x00400000 /* ATS address translation range reserved */ |
|
|
/* IVRS subtable header */ |
|
typedef struct acpi_ivrs_header |
{ |
UINT8 Type; /* Subtable type */ |
UINT8 Flags; |
UINT16 Length; /* Subtable length */ |
UINT16 DeviceId; /* ID of IOMMU */ |
|
} ACPI_IVRS_HEADER; |
|
/* Values for subtable Type above */ |
|
enum AcpiIvrsType |
{ |
ACPI_IVRS_TYPE_HARDWARE = 0x10, |
ACPI_IVRS_TYPE_MEMORY1 = 0x20, |
ACPI_IVRS_TYPE_MEMORY2 = 0x21, |
ACPI_IVRS_TYPE_MEMORY3 = 0x22 |
}; |
|
/* Masks for Flags field above for IVHD subtable */ |
|
#define ACPI_IVHD_TT_ENABLE (1) |
#define ACPI_IVHD_PASS_PW (1<<1) |
#define ACPI_IVHD_RES_PASS_PW (1<<2) |
#define ACPI_IVHD_ISOC (1<<3) |
#define ACPI_IVHD_IOTLB (1<<4) |
|
/* Masks for Flags field above for IVMD subtable */ |
|
#define ACPI_IVMD_UNITY (1) |
#define ACPI_IVMD_READ (1<<1) |
#define ACPI_IVMD_WRITE (1<<2) |
#define ACPI_IVMD_EXCLUSION_RANGE (1<<3) |
|
|
/* |
* IVRS subtables, correspond to Type in ACPI_IVRS_HEADER |
*/ |
|
/* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */ |
|
typedef struct acpi_ivrs_hardware |
{ |
ACPI_IVRS_HEADER Header; |
UINT16 CapabilityOffset; /* Offset for IOMMU control fields */ |
UINT64 BaseAddress; /* IOMMU control registers */ |
UINT16 PciSegmentGroup; |
UINT16 Info; /* MSI number and unit ID */ |
UINT32 Reserved; |
|
} ACPI_IVRS_HARDWARE; |
|
/* Masks for Info field above */ |
|
#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */ |
#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, UnitID */ |
|
|
/* |
* Device Entries for IVHD subtable, appear after ACPI_IVRS_HARDWARE structure. |
* Upper two bits of the Type field are the (encoded) length of the structure. |
* Currently, only 4 and 8 byte entries are defined. 16 and 32 byte entries |
* are reserved for future use but not defined. |
*/ |
typedef struct acpi_ivrs_de_header |
{ |
UINT8 Type; |
UINT16 Id; |
UINT8 DataSetting; |
|
} ACPI_IVRS_DE_HEADER; |
|
/* Length of device entry is in the top two bits of Type field above */ |
|
#define ACPI_IVHD_ENTRY_LENGTH 0xC0 |
|
/* Values for device entry Type field above */ |
|
enum AcpiIvrsDeviceEntryType |
{ |
/* 4-byte device entries, all use ACPI_IVRS_DEVICE4 */ |
|
ACPI_IVRS_TYPE_PAD4 = 0, |
ACPI_IVRS_TYPE_ALL = 1, |
ACPI_IVRS_TYPE_SELECT = 2, |
ACPI_IVRS_TYPE_START = 3, |
ACPI_IVRS_TYPE_END = 4, |
|
/* 8-byte device entries */ |
|
ACPI_IVRS_TYPE_PAD8 = 64, |
ACPI_IVRS_TYPE_NOT_USED = 65, |
ACPI_IVRS_TYPE_ALIAS_SELECT = 66, /* Uses ACPI_IVRS_DEVICE8A */ |
ACPI_IVRS_TYPE_ALIAS_START = 67, /* Uses ACPI_IVRS_DEVICE8A */ |
ACPI_IVRS_TYPE_EXT_SELECT = 70, /* Uses ACPI_IVRS_DEVICE8B */ |
ACPI_IVRS_TYPE_EXT_START = 71, /* Uses ACPI_IVRS_DEVICE8B */ |
ACPI_IVRS_TYPE_SPECIAL = 72 /* Uses ACPI_IVRS_DEVICE8C */ |
}; |
|
/* Values for Data field above */ |
|
#define ACPI_IVHD_INIT_PASS (1) |
#define ACPI_IVHD_EINT_PASS (1<<1) |
#define ACPI_IVHD_NMI_PASS (1<<2) |
#define ACPI_IVHD_SYSTEM_MGMT (3<<4) |
#define ACPI_IVHD_LINT0_PASS (1<<6) |
#define ACPI_IVHD_LINT1_PASS (1<<7) |
|
|
/* Types 0-4: 4-byte device entry */ |
|
typedef struct acpi_ivrs_device4 |
{ |
ACPI_IVRS_DE_HEADER Header; |
|
} ACPI_IVRS_DEVICE4; |
|
/* Types 66-67: 8-byte device entry */ |
|
typedef struct acpi_ivrs_device8a |
{ |
ACPI_IVRS_DE_HEADER Header; |
UINT8 Reserved1; |
UINT16 UsedId; |
UINT8 Reserved2; |
|
} ACPI_IVRS_DEVICE8A; |
|
/* Types 70-71: 8-byte device entry */ |
|
typedef struct acpi_ivrs_device8b |
{ |
ACPI_IVRS_DE_HEADER Header; |
UINT32 ExtendedData; |
|
} ACPI_IVRS_DEVICE8B; |
|
/* Values for ExtendedData above */ |
|
#define ACPI_IVHD_ATS_DISABLED (1<<31) |
|
/* Type 72: 8-byte device entry */ |
|
typedef struct acpi_ivrs_device8c |
{ |
ACPI_IVRS_DE_HEADER Header; |
UINT8 Handle; |
UINT16 UsedId; |
UINT8 Variety; |
|
} ACPI_IVRS_DEVICE8C; |
|
/* Values for Variety field above */ |
|
#define ACPI_IVHD_IOAPIC 1 |
#define ACPI_IVHD_HPET 2 |
|
|
/* 0x20, 0x21, 0x22: I/O Virtualization Memory Definition Block (IVMD) */ |
|
typedef struct acpi_ivrs_memory |
{ |
ACPI_IVRS_HEADER Header; |
UINT16 AuxData; |
UINT64 Reserved; |
UINT64 StartAddress; |
UINT64 MemoryLength; |
|
} ACPI_IVRS_MEMORY; |
|
|
/******************************************************************************* |
* |
* MCFG - PCI Memory Mapped Configuration table and sub-table |
* Version 1 |
* |
* Conforms to "PCI Firmware Specification", Revision 3.0, June 20, 2005 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_mcfg |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 Reserved[8]; |
|
} ACPI_TABLE_MCFG; |
|
|
/* Subtable */ |
|
typedef struct acpi_mcfg_allocation |
{ |
UINT64 Address; /* Base address, processor-relative */ |
UINT16 PciSegment; /* PCI segment group number */ |
UINT8 StartBusNumber; /* Starting PCI Bus number */ |
UINT8 EndBusNumber; /* Final PCI Bus number */ |
UINT32 Reserved; |
|
} ACPI_MCFG_ALLOCATION; |
|
|
/******************************************************************************* |
* |
* MCHI - Management Controller Host Interface Table |
* Version 1 |
* |
* Conforms to "Management Component Transport Protocol (MCTP) Host |
* Interface Specification", Revision 1.0.0a, October 13, 2009 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_mchi |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 InterfaceType; |
UINT8 Protocol; |
UINT64 ProtocolData; |
UINT8 InterruptType; |
UINT8 Gpe; |
UINT8 PciDeviceFlag; |
UINT32 GlobalInterrupt; |
ACPI_GENERIC_ADDRESS ControlRegister; |
UINT8 PciSegment; |
UINT8 PciBus; |
UINT8 PciDevice; |
UINT8 PciFunction; |
|
} ACPI_TABLE_MCHI; |
|
|
/******************************************************************************* |
* |
* SPCR - Serial Port Console Redirection table |
* Version 1 |
* |
* Conforms to "Serial Port Console Redirection Table", |
* Version 1.00, January 11, 2002 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_spcr |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 InterfaceType; /* 0=full 16550, 1=subset of 16550 */ |
UINT8 Reserved[3]; |
ACPI_GENERIC_ADDRESS SerialPort; |
UINT8 InterruptType; |
UINT8 PcInterrupt; |
UINT32 Interrupt; |
UINT8 BaudRate; |
UINT8 Parity; |
UINT8 StopBits; |
UINT8 FlowControl; |
UINT8 TerminalType; |
UINT8 Reserved1; |
UINT16 PciDeviceId; |
UINT16 PciVendorId; |
UINT8 PciBus; |
UINT8 PciDevice; |
UINT8 PciFunction; |
UINT32 PciFlags; |
UINT8 PciSegment; |
UINT32 Reserved2; |
|
} ACPI_TABLE_SPCR; |
|
/* Masks for PciFlags field above */ |
|
#define ACPI_SPCR_DO_NOT_DISABLE (1) |
|
|
/******************************************************************************* |
* |
* SPMI - Server Platform Management Interface table |
* Version 5 |
* |
* Conforms to "Intelligent Platform Management Interface Specification |
* Second Generation v2.0", Document Revision 1.0, February 12, 2004 with |
* June 12, 2009 markup. |
* |
******************************************************************************/ |
|
typedef struct acpi_table_spmi |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 InterfaceType; |
UINT8 Reserved; /* Must be 1 */ |
UINT16 SpecRevision; /* Version of IPMI */ |
UINT8 InterruptType; |
UINT8 GpeNumber; /* GPE assigned */ |
UINT8 Reserved1; |
UINT8 PciDeviceFlag; |
UINT32 Interrupt; |
ACPI_GENERIC_ADDRESS IpmiRegister; |
UINT8 PciSegment; |
UINT8 PciBus; |
UINT8 PciDevice; |
UINT8 PciFunction; |
UINT8 Reserved2; |
|
} ACPI_TABLE_SPMI; |
|
/* Values for InterfaceType above */ |
|
enum AcpiSpmiInterfaceTypes |
{ |
ACPI_SPMI_NOT_USED = 0, |
ACPI_SPMI_KEYBOARD = 1, |
ACPI_SPMI_SMI = 2, |
ACPI_SPMI_BLOCK_TRANSFER = 3, |
ACPI_SPMI_SMBUS = 4, |
ACPI_SPMI_RESERVED = 5 /* 5 and above are reserved */ |
}; |
|
|
/******************************************************************************* |
* |
* TCPA - Trusted Computing Platform Alliance table |
* Version 1 |
* |
* Conforms to "TCG PC Specific Implementation Specification", |
* Version 1.1, August 18, 2003 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_tcpa |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT16 Reserved; |
UINT32 MaxLogLength; /* Maximum length for the event log area */ |
UINT64 LogAddress; /* Address of the event log area */ |
|
} ACPI_TABLE_TCPA; |
|
|
/******************************************************************************* |
* |
* UEFI - UEFI Boot optimization Table |
* Version 1 |
* |
* Conforms to "Unified Extensible Firmware Interface Specification", |
* Version 2.3, May 8, 2009 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_uefi |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT8 Identifier[16]; /* UUID identifier */ |
UINT16 DataOffset; /* Offset of remaining data in table */ |
|
} ACPI_TABLE_UEFI; |
|
|
/******************************************************************************* |
* |
* WAET - Windows ACPI Emulated devices Table |
* Version 1 |
* |
* Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_waet |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT32 Flags; |
|
} ACPI_TABLE_WAET; |
|
/* Masks for Flags field above */ |
|
#define ACPI_WAET_RTC_NO_ACK (1) /* RTC requires no int acknowledge */ |
#define ACPI_WAET_TIMER_ONE_READ (1<<1) /* PM timer requires only one read */ |
|
|
/******************************************************************************* |
* |
* WDAT - Watchdog Action Table |
* Version 1 |
* |
* Conforms to "Hardware Watchdog Timers Design Specification", |
* Copyright 2006 Microsoft Corporation. |
* |
******************************************************************************/ |
|
typedef struct acpi_table_wdat |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
UINT32 HeaderLength; /* Watchdog Header Length */ |
UINT16 PciSegment; /* PCI Segment number */ |
UINT8 PciBus; /* PCI Bus number */ |
UINT8 PciDevice; /* PCI Device number */ |
UINT8 PciFunction; /* PCI Function number */ |
UINT8 Reserved[3]; |
UINT32 TimerPeriod; /* Period of one timer count (msec) */ |
UINT32 MaxCount; /* Maximum counter value supported */ |
UINT32 MinCount; /* Minimum counter value */ |
UINT8 Flags; |
UINT8 Reserved2[3]; |
UINT32 Entries; /* Number of watchdog entries that follow */ |
|
} ACPI_TABLE_WDAT; |
|
/* Masks for Flags field above */ |
|
#define ACPI_WDAT_ENABLED (1) |
#define ACPI_WDAT_STOPPED 0x80 |
|
|
/* WDAT Instruction Entries (actions) */ |
|
typedef struct acpi_wdat_entry |
{ |
UINT8 Action; |
UINT8 Instruction; |
UINT16 Reserved; |
ACPI_GENERIC_ADDRESS RegisterRegion; |
UINT32 Value; /* Value used with Read/Write register */ |
UINT32 Mask; /* Bitmask required for this register instruction */ |
|
} ACPI_WDAT_ENTRY; |
|
/* Values for Action field above */ |
|
enum AcpiWdatActions |
{ |
ACPI_WDAT_RESET = 1, |
ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4, |
ACPI_WDAT_GET_COUNTDOWN = 5, |
ACPI_WDAT_SET_COUNTDOWN = 6, |
ACPI_WDAT_GET_RUNNING_STATE = 8, |
ACPI_WDAT_SET_RUNNING_STATE = 9, |
ACPI_WDAT_GET_STOPPED_STATE = 10, |
ACPI_WDAT_SET_STOPPED_STATE = 11, |
ACPI_WDAT_GET_REBOOT = 16, |
ACPI_WDAT_SET_REBOOT = 17, |
ACPI_WDAT_GET_SHUTDOWN = 18, |
ACPI_WDAT_SET_SHUTDOWN = 19, |
ACPI_WDAT_GET_STATUS = 32, |
ACPI_WDAT_SET_STATUS = 33, |
ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */ |
}; |
|
/* Values for Instruction field above */ |
|
enum AcpiWdatInstructions |
{ |
ACPI_WDAT_READ_VALUE = 0, |
ACPI_WDAT_READ_COUNTDOWN = 1, |
ACPI_WDAT_WRITE_VALUE = 2, |
ACPI_WDAT_WRITE_COUNTDOWN = 3, |
ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */ |
ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */ |
}; |
|
|
/******************************************************************************* |
* |
* WDRT - Watchdog Resource Table |
* Version 1 |
* |
* Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003", |
* Version 1.01, August 28, 2006 |
* |
******************************************************************************/ |
|
typedef struct acpi_table_wdrt |
{ |
ACPI_TABLE_HEADER Header; /* Common ACPI table header */ |
ACPI_GENERIC_ADDRESS ControlRegister; |
ACPI_GENERIC_ADDRESS CountRegister; |
UINT16 PciDeviceId; |
UINT16 PciVendorId; |
UINT8 PciBus; /* PCI Bus number */ |
UINT8 PciDevice; /* PCI Device number */ |
UINT8 PciFunction; /* PCI Function number */ |
UINT8 PciSegment; /* PCI Segment number */ |
UINT16 MaxCount; /* Maximum counter value supported */ |
UINT8 Units; |
|
} ACPI_TABLE_WDRT; |
|
|
/* Reset to default packing */ |
|
#pragma pack() |
|
#endif /* __ACTBL2_H__ */ |
|