0,0 → 1,425 |
<!-- |
Preliminary DTD for Open JPEG "mj2_to_metadata" function. |
Last revised: April 20, 2005 |
Author: Glenn Pearson, at U.S. National Library of Medicine. |
See mj2_to_metadata.c regarding copyright, license, disclaimer status. |
|
While the vocabulary of this DTD is based on the relevant portions of the |
ISO/IEC JPEG 200 standard, the detailed representation is the author's own. |
It is neither an ISO/IEC nor NLM official or consensus representation. |
Furthermore, it deviates from a pure representation of the ISO/IEC standard |
in these aspects: |
|
- it is incomplete in a number of ways (which to some extent may be |
addressed over time); |
- it has extensions for "derived" data and "statistics"; |
- it is more flexible. That is, some elements are marked as optional |
not because they are optional in an MJ2 file, but because reporting |
of them is optional based on current or projected mj2_to_metadata |
command-line flags. |
--> |
<!ELEMENT MJ2_File (JP2?, FileType?, MovieBox?)> |
<!ELEMENT JP2 EMPTY> |
<!ATTLIST JP2 BoxType CDATA #FIXED "jP[space][space]"> |
<!ATTLIST JP2 Signature CDATA #FIXED "0x0d0a870a"> |
<!ELEMENT FileType (Brand, MinorVersion, CompatibilityList)> |
<!ATTLIST FileType BoxType CDATA #FIXED "ftyp"> |
<!ELEMENT Brand (#PCDATA)> <!-- 4 characters max --> |
<!ELEMENT MinorVersion (#PCDATA)> <!-- 4 chararcters max --> |
<!ELEMENT CompatibilityList (CompatibleBrand)*> |
<!ATTLIST CompatibilityList Count CDATA #REQUIRED> <!-- Count >= 0 --> |
<!ELEMENT CompatibleBrand (#PCDATA)> <!-- 4 characters max --> |
<!ELEMENT MovieBox (MovieHeader, Statistics?, Track*)> |
<!ATTLIST MovieBox BoxType CDATA #FIXED "moov"> |
<!ELEMENT MovieHeader (CreationTime, ModificationTime, Timescale, Rate, Duration, Volume, TransformationMatrix)> |
<!ATTLIST MovieHeader BoxType CDATA #FIXED "mvhd"> |
<!ELEMENT CreationTime (InSeconds?,AsLocalTime?)> |
<!ELEMENT InSeconds (#PCDATA)> |
<!ELEMENT AsLocalTime (#PCDATA)> |
<!ELEMENT ModificationTime (InSeconds?,AsLocalTime?)> |
<!ELEMENT Timescale (#PCDATA)> <!-- Timescale defines time units in one second --> |
<!ELEMENT Rate (AsHex | (AsHex, AsDecimal) | AsDecimal)> <!-- Decimal is Approximation; Optional on input. --> |
<!ELEMENT AsHex (#PCDATA)> |
<!ELEMENT AsDecimal (#PCDATA)> |
<!ELEMENT Duration (InTimeUnits | (InTimeUnits, InSeconds) | InSeconds)> <!-- InSeconds Optional on input. --> |
<!ELEMENT InTimeUnits (#PCDATA)> |
<!ELEMENT Volume (AsHex | (AsHex, AsDecimal) | AsDecimal)> <!-- hex default = 0x0100 --> |
<!-- Fixed 8.8 value of audio volume. Full, normal value is 1.0 (0x0100) --> |
<!ELEMENT TransformationMatrix (TMa,TMb,TMu,TMc,TMd,TMv,TMx,TMy,TMw)> <!-- for video --> |
<!-- 3 x 3 Video Transformation Matrix {a,b,u,c,d,v,x,y,w}. Required: u=0, v=0, w=1 --> |
<!-- Maps decompressed point (p,q) to rendered point (ap + cq + x, bp + dq + y) --> |
<!-- Stored as Fixed Point Hex: all are 16.16, except u,v,w are 2.30 --> |
<!-- Unity = 0x00010000,0,0,0,0x00010000,0,0,0,0x40000000 --> |
<!ELEMENT TMa (#PCDATA)> |
<!ELEMENT TMb (#PCDATA)> |
<!ELEMENT TMu (#PCDATA)> <!--Always "0x00000000" --> |
<!ELEMENT TMc (#PCDATA)> |
<!ELEMENT TMd (#PCDATA)> |
<!ELEMENT TMv (#PCDATA)> <!--Always "0x00000000" --> |
<!ELEMENT TMx (#PCDATA)> |
<!ELEMENT TMy (#PCDATA)> |
<!ELEMENT TMw (#PCDATA)> <!--Always "0x40000000" --> |
|
<!ELEMENT Statistics (TracksFound)> |
<!ELEMENT TracksFound (Video,Audio,Hint)> |
<!ELEMENT Video (#PCDATA)> |
<!ELEMENT Audio (#PCDATA)> |
<!ELEMENT Hint (#PCDATA)> |
|
|
<!-- For now, output info on at most one video track --> |
|
|
<!ELEMENT Track (TrackHeader, TrackReferenceContainer?, EditListContainer?, Media, JP2_Frame?)> <!-- JP2_Frame is mj2_to_metadata extension --> |
<!ATTLIST Track BoxType CDATA #FIXED "trak"> |
<!ATTLIST Track Instance CDATA #REQUIRED> |
<!ELEMENT TrackHeader (TrackID, TrackLayer?, Volume?, TransformationMatrix?, Width?, Height?)> |
<!ATTLIST TrackHeader BoxType CDATA #FIXED "tkhd"> |
<!-- Not shown here: CreationTime, ModificationTime, Duration. --> |
<!-- These 3 fields are reported under MediaHeader below. When reading these 3, --> |
<!-- m2j_to_metadata currently doesn't distinguish between TrackHeader and MediaHeader source. --> |
<!-- If both found, value read from MediaHeader is used. --> |
<!ELEMENT TrackID (#PCDATA)> |
<!ELEMENT TrackLayer (#PCDATA)> <!-- front-to-back ordering of video tracks. 0 = normal, -1 is closer, etc. --> |
<!-- "Volume" element described above; here it is for particular audio track. Full, normal (default = 0x0100) --> |
<!-- "TransformationMatrix" element described above; matrix here is applied before MovieHeader one. --> |
<!ELEMENT Width (AsHex | (AsHex, AsDecimal) | AsDecimal)> |
<!ELEMENT Height (AsHex | (AsHex, AsDecimal) | AsDecimal)> |
<!-- AsHex, AsDecimal already defined above --> |
<!-- Width and Height are for the presentation; frames will be scaled to this --> |
<!-- /TrackHeader --> |
<!ELEMENT TrackReferenceContainer ANY> <!-- TO DO: TrackReferenceContainer 'tref' just used in hint track --> |
<!ELEMENT EditListContainer ANY> <!-- TO DO: EditListContainer 'edts', contains EditList 'elst' with media-time, segment-duration, media-rate --> |
<!ELEMENT Media (MediaHeader, HandlerReference,MediaInfoContainer)> |
<!ATTLIST Media BoxType CDATA #FIXED "mdia"> |
<!ELEMENT MediaHeader (CreationTime,ModificationTime,Timescale,Duration,Language)> |
<!ATTLIST MediaHeader BoxType CDATA #FIXED "mdhd"> |
<!-- Elements already defined above: CreationTime, ModificationTime, Timescale, Duration --> |
<!ELEMENT Language (#PCDATA)> <!-- 3 chars max. There's an enumeration available --> |
<!ELEMENT HandlerReference (HandlerType)> |
<!ATTLIST HandlerReference BoxType CDATA #FIXED "hdlr"> |
<!ELEMENT HandlerType (#PCDATA)> |
<!ATTLIST HandlerType Code ( vide | soun | hint ) "vide"> |
|
<!-- make the media headers multiple? --> |
<!ELEMENT MediaInfoContainer ((VideoMediaHeader | SoundMediaHeader | HintMediaHeader), DataInfo, SampleTable)> |
<!ATTLIST MediaInfoContainer BoxType CDATA #FIXED "minf"> |
<!ELEMENT VideoMediaHeader (GraphicsMode, Opcolor)> |
<!ATTLIST VideoMediaHeader BoxType CDATA #FIXED "vmhd"> |
<!ELEMENT GraphicsMode (#PCDATA)> |
<!-- Enumerated values of graphics mode: --> |
<!-- 0x00 = copy (over existing image); --> |
<!-- 0x24 = transparent; 'blue-screen' this image using opcolor; --> |
<!-- 0x100 = alpha; alpha-blend this image --> |
<!-- 0x101 = whitealpha; alpha-blend this image, which has been blended with white; --> |
<!-- 0x102 = blackalpha; alpha-blend this image, which has been blended with black. --> |
<!ELEMENT Opcolor (Red,Green,Blue)> |
<!ELEMENT Red (#PCDATA)> |
<!ELEMENT Green (#PCDATA)> |
<!ELEMENT Blue (#PCDATA)> |
<!ELEMENT SoundMediaHeader (Balance)> |
<!ATTLIST SoundMediaHeader BoxType CDATA #FIXED "smhd"> |
<!ELEMENT Balance (#PCDATA)> |
<!-- Fixed Point 8.8, fixes mono track in stereo space. --> |
<!-- 0.0 = center, -1.0 = full left, 1.0 = full right --> |
<!ELEMENT HintMediaHeader (MaxPDU_Size, AvgPDU_Size, MaxBitRate, AvgBitRate, SlidingAvgBitRate)> |
<!ATTLIST HintMediaHeader BoxType CDATA #FIXED "hmhd"> |
<!ELEMENT MaxPDU_Size (#PCDATA)> |
<!-- Size in bytes of largest PDU in this hint stream. --> |
<!ELEMENT AvgPDU_Size (#PCDATA)> |
<!-- Average size in bytes of a PDU over the entire presentation. --> |
<!ELEMENT MaxBitRate (#PCDATA)> |
<!-- Maximum rate in bits per second over any window of 1 second. --> |
<!ELEMENT AvgBitRate (#PCDATA)> |
<!-- Averate rate in bits per second over the entire presentation. --> |
<!ELEMENT SlidingAvgBit (#PCDATA)> |
<!-- Maximum rate in bits per second over any window of one minute. --> |
|
<!ELEMENT DataInfo (DataReference)> |
<!ATTLIST DataInfo BoxType CDATA #FIXED "dinf"> |
<!ELEMENT DataReference (DataEntryUrlBox | DataEntryUrnBox )*> |
<!ATTLIST DataReference BoxType CDATA #FIXED "dref"> |
<!ATTLIST DataReference URL_Count CDATA #REQUIRED> |
<!ATTLIST DataReference URN_Count CDATA #REQUIRED> <!-- table w. flags, URLs, URNs --> |
<!-- // Data structure does not distinguish between single URL, single URN, or DREF table or URLs & URNs. |
// We could infer those, but for now just present everything as a DREF table. |
--> |
<!-- No entries here mean that file is self-contained, as required by Simple Profile. --> |
|
<!ELEMENT DataEntryUrlBox (Location)> |
<!ATTLIST DataEntryUrlBox BoxType CDATA #FIXED "url[space]"> <!-- table w. flags, URLs, URNs --> |
<!-- Only the first 16 bytes of URL location are recorded in mj2_to_metadata data structure. --> |
<!ELEMENT DataEntryUrnBox (Name, Location?)> |
<!ATTLIST DataEntryUrnBox BoxType CDATA #FIXED "urn[space]\"> |
<!-- Only the first 16 bytes each of URN name and optional location are recorded in mj2_to_metadata data structure. --> |
|
<!ELEMENT SampleTable (VisualSampleEntry,TimeToSample,SampleToChunk,SampleSize,ChunkOffset)> <!-- structure doesn't do non-visual sample entry yet --> |
<!ATTLIST SampleTable BoxType CDATA #FIXED "stbl"> <!-- to add: entry count --> |
<!-- Next are instances of generic SampleDescription BoxType=\"stsd\" --> |
|
<!-- There could be multiple instances of this, but "entry_count" is just a local at read-time. |
And it's used wrong, too, as count of just visual type, when it's really all 3 types. |
This is referred to as "smj2" within mj2.c --> |
<!ELEMENT VisualSampleEntry (WidthAsInteger, HeightAsInteger, HorizontalRes, VerticalRes, CompressorName, Depth, JP2Header?, FieldCoding?, MJP2_Profile?, MJP2_Prefix?, MJP2_SubSampling?, MJP2_OriginalFormat?)> |
<!ATTLIST VisualSampleEntry BoxType CDATA #FIXED "mjp2"> |
<!-- If multiple instances of this, only first is shown here. --> |
<!ELEMENT WidthAsInteger (#PCDATA)> |
<!ELEMENT HeightAsInteger (#PCDATA)> |
<!ELEMENT HorizontalRes (AsHex | (AsHex, AsDecimal) | AsDecimal)> |
<!ELEMENT VerticalRes (AsHex | (AsHex, AsDecimal) | AsDecimal)> |
<!-- Typical value for both resolution is 72 (0x00480000) --> |
<!ELEMENT CompressorName (#PCDATA)> |
<!-- Compressor name for debugging. Standard restricts max length to 31 bytes. --> |
<!-- Usually blank or \"Motion JPEG2000\" --> |
<!ELEMENT Depth (#PCDATA)> |
<!-- Depth is: --> |
<!-- 0x20: alpha channels present (color or grayscale) --> |
<!-- 0x28: grayscale without alpha --> |
<!-- 0x18: color without alpha --> |
|
<!-- TODO somewhere: tk->jp2_struct.numcomps --> |
<!ELEMENT JP2Header (ImageHeader, ColourSpecification)> |
<!ATTLIST JP2Header BoxType CDATA #FIXED "jp2h"> |
<!ELEMENT ImageHeader (HEIGHT, WIDTH, NC, BPC, C, UnkC, IPR)> |
<!ATTLIST ImageHeader BoxType CDATA #FIXED "ihdr"> |
<!ELEMENT HEIGHT (#PCDATA)> <!-- If 2 fields/frame, total deinterlaced height --> |
<!ELEMENT WIDTH (#PCDATA)> |
<!ELEMENT NC (#PCDATA)> <!-- number of components --> |
<!ELEMENT BPC (AsHex | (AsHex,BitsPerPixel,Signed) | (BitsPerPixel,Signed))> |
<!ELEMENT BitsPerPixel (#PCDATA)> |
<!ELEMENT Signed (#PCDATA)> |
<!ELEMENT C (#PCDATA)> <!-- Compression type. Only "7" defined --> |
<!ELEMENT UnkC (#PCDATA)> <!-- Colourspace Unknown. 1 = unknown, 0 = known --> |
<!ELEMENT IPR (#PCDATA)> <!-- 1 = frame has Intellectual Prop. box; otherwise 0 --> |
<!ELEMENT ColourSpecification (METH, PREC, APPROX, EnumCS)> |
<!ATTLIST ColourSpecification BoxType CDATA #FIXED "colr"> |
<!ELEMENT METH (#PCDATA)> <!-- 1 = EnumCS field; 2 = PROFILE field (not yet generated) --> |
<!ELEMENT PREC (#PCDATA)> <!-- precedence must be 0 so far --> |
<!ELEMENT APPROX (#PCDATA)> <!-- colourspace approximation must be 0 so far --> |
<!ELEMENT EnumCS (#PCDATA)> <!-- Valid enumerated MJ2 colourspaces: 16 (sRGB), 17 (grey sRGB), 18 (YCC) --> |
|
<!-- Following subboxes are optional --> |
<!ELEMENT FieldCoding (FieldCount, FieldOrder)> |
<!ATTLIST FieldCoding BoxType CDATA #FIXED "fiel"> |
<!ELEMENT FieldCount (#PCDATA)> |
<!-- Must be either 1 or 2 --> |
<!ELEMENT FieldOrder (#PCDATA)> |
<!-- When FieldCount=2, FieldOrder means: --> |
<!-- 0: Field coding unknown --> |
<!-- 1: Field with topmost line is stored first in sample; fields are in temporal order --> |
<!-- 6: Field with topmost line is stored second in sample; fields are in temporal order --> |
<!-- Defaults: FieldCount=1, FieldOrder=0 if FieldCoding box not present --> |
<!-- Current implementation doesn't retain whether box was actually present. --> |
|
<!ELEMENT MJP2_Profile (CompatibleBrand*)> |
<!ATTLIST MJP2_Profile BoxType CDATA #FIXED "jp2p"> |
<!ATTLIST MJP2_Profile Count CDATA #REQUIRED> |
|
<!ELEMENT MJP2_Prefix (Data*)> |
<!ATTLIST MJP2_Prefix BoxType CDATA #FIXED "jp2x"> |
<!ATTLIST MJP2_Prefix Count CDATA #REQUIRED> |
<!-- We'll probably need better formatting than this --> |
<!ELEMENT Data (#PCDATA)> <!-- Multiple. Each entry is single byte --> |
|
<!ELEMENT MJP2_SubSampling (HorizontalSub, VerticalSub, HorizontalOffset, VerticalOffset)> |
<!ATTLIST MJP2_SubSampling BoxType CDATA #FIXED "jsub"> |
<!-- These values are all 1 byte --> |
<!-- Typical subsample value is 2 for 4:2:0 --> |
<!ELEMENT HorizontalSub (#PCDATA)> |
<!ELEMENT VerticalSub (#PCDATA)> |
<!ELEMENT HorizontalOffset (#PCDATA)> |
<!ELEMENT VerticalOffset (#PCDATA)> |
|
<!ELEMENT MJP2_OriginalFormat (OriginalFieldCount, OriginalFieldOrder)> |
<!ATTLIST MJP2_OriginalFormat BoxType CDATA #FIXED "orfo"> <!-- Part III Appx. 2 --> |
<!ELEMENT OriginalFieldCount (#PCDATA)> |
<!-- In original material before encoding. Must be either 1 or 2 --> |
<!ELEMENT OriginalFieldOrder (#PCDATA)> |
<!-- When FieldCount=2, FieldOrder means: --> |
<!-- 0: Field coding unknown --> |
<!-- 11: Topmost line came from the earlier field; --> |
<!-- 16: Topmost line came form the later field. --> |
<!-- Defaults: FieldCount=1, FieldOrder=0 if FieldCoding box not present --> |
<!-- Current implementation doesn't retain whether box was actually present. --> |
|
|
<!-- mj2_to_metadata's data structure doesn't record Audio and Hint sample data currently. --> |
|
<!-- Within SampleTable: --> |
<!ELEMENT TimeToSample (SampleStatistics, SampleEntries)> |
<!ATTLIST TimeToSample BoxType CDATA #FIXED "stts"> |
<!ELEMENT SampleStatistics (TotalSamples)> <!-- Not part of standard --> |
<!ELEMENT TotalSamples (#PCDATA)> |
<!-- For video, gives the total frames in the track, by summing all entries in the Sample Table --> |
|
<!ELEMENT SampleEntries (Table*)> |
<!ATTLIST SampleEntries EntryCount CDATA #REQUIRED> |
<!ELEMENT Table EMPTY> <!-- Multiple. Attributes have values --> |
<!ATTLIST Table Entry CDATA #REQUIRED> |
<!ATTLIST Table SampleCount CDATA #REQUIRED> |
<!ATTLIST Table SampleDelta CDATA #REQUIRED> |
|
<!-- Within SampleTable: --> |
<!ELEMENT SampleToChunk (FirstChunk,SamplesPerChunk,SampleDescrIndex)> |
<!ATTLIST SampleToChunk BoxType CDATA #FIXED "stsc"> |
<!ATTLIST SampleToChunk Count CDATA #REQUIRED> |
<!ELEMENT FirstChunk (#PCDATA)> |
<!ELEMENT SamplesPerChunk (#PCDATA)> |
<!ELEMENT SampleDescrIndex (#PCDATA)> |
<!ELEMENT SampleSize (Sample_Size,Sample_Count,EntrySize*)> |
<!ATTLIST SampleSize BoxType CDATA #FIXED "stsz"> |
<!ELEMENT Sample_Size (#PCDATA)> |
<!ELEMENT Sample_Count (#PCDATA)> |
<!ELEMENT EntrySize (#PCDATA)> <!-- appears multiply, but only with mj2_to_metadata option -t --> |
<!ATTLIST EntrySize Num CDATA #REQUIRED> |
<!ELEMENT ChunkOffset (EntryCount, Chunk_Offset*)> |
<!ATTLIST ChunkOffset BoxType CDATA #FIXED "stco"> |
<!ELEMENT EntryCount (#PCDATA)> |
<!ELEMENT Chunk_Offset (#PCDATA)> <!-- appears multiply, but only with mj2_to_metadata option -t --> |
<!ATTLIST Chunk_Offset Num CDATA #REQUIRED> |
<!-- </SampleTable> </MediaInfoContainer> </Media> --> |
|
<!-- TO DO: optional UserData 'udat', can contain multiple Copyright 'cprt' --> |
|
|
<!-- Optional, and only for Visual Track: given individual frame --> |
<!ELEMENT JP2_Frame (MainHeader, TilePartHeaders)> |
<!ATTLIST JP2_Frame Num CDATA #REQUIRED> |
<!ELEMENT MainHeader (StartOfCodestream,ImageAndFileSize,CodingStyleDefault,QuantizationDefault,QuantizationComponent*,RegionOfInterest?,ProgressionOrderChange*)> |
<!ELEMENT StartOfCodestream EMPTY> |
<!ATTLIST StartOfCodestream Marker CDATA #FIXED "SOC"> |
<!ELEMENT ImageAndFileSize (Xsiz,Ysiz,XOsiz,YOsiz,XTsiz,YTsiz,XTOsiz,YTOsiz,Csiz,Component+)> |
<!ATTLIST ImageAndFileSize Marker CDATA #FIXED "SIZ"> |
<!ELEMENT Xsiz (#PCDATA)> |
<!ELEMENT Ysiz (#PCDATA)> <!-- Xsiz, Ysiz is the size of the reference grid. --> |
<!ELEMENT XOsiz (#PCDATA)> |
<!ELEMENT YOsiz (#PCDATA)> <!-- XOsiz, YOsiz are offsets from grid origin to image origin. --> |
<!ELEMENT XTsiz (#PCDATA)> |
<!ELEMENT YTsiz (#PCDATA)> <!-- XTsiz, YTsiz is the size of one tile with respect to the grid. --> |
<!ELEMENT XTOsiz (#PCDATA)> |
<!ELEMENT YTOsiz (#PCDATA)> <!-- XTOsiz, YTOsiz are offsets from grid origin to first tile origin. --> |
<!ELEMENT Csiz (#PCDATA)> <!-- Csiz is the number of components in the image. --> |
<!-- For image components next --> |
<!ELEMENT Component (Ssiz,XRsiz,YRsiz,WidthOfData,HeightOfData)> |
<!ATTLIST Component Num CDATA #REQUIRED> |
<!ELEMENT Ssiz (AsHex | (AsHex,Signed,PrecisionInBits) | (Signed,PrecisionInBits))> |
<!-- Signed already defined --> |
<!ELEMENT PrecisionInBits (#PCDATA)> <!-- Bits per pixel (bpp) or pixel depth. --> |
<!ELEMENT XRsiz (#PCDATA)> |
<!ELEMENT YRsiz (#PCDATA)> <!-- XRsiz, YRsiz denote pixel-sample-spacing on the grid, per Part I Annex B. --> |
<!ELEMENT WidthOfData (#PCDATA)> |
<!ELEMENT HeightOfData (#PCDATA)> <!-- WidthOfData and HeightOfData are calculated values, e.g.: w = roundup((Xsiz - XOsiz)/ XRsiz) --> |
<!-- --> |
<!ELEMENT CodingStyleDefault (Scod,SGcod,SPcod)> |
<!ATTLIST CodingStyleDefault Marker CDATA #FIXED "COD"> |
<!ELEMENT Scod (#PCDATA)> |
<!-- For Scod, specific bits mean (where bit 0 is lowest or rightmost): --> |
<!-- bit 0: Defines entropy coder precincts --> |
<!-- 0 = (PPx=15, PPy=15); 1 = precincts defined below. --> |
<!-- bit 1: 1 = SOP marker may be used; 0 = not. --> |
<!-- bit 2: 1 = EPH marker may be used; 0 = not. --> |
<!ELEMENT SGcod (ProgressionOrder,NumberOfLayers,MultipleComponentTransformation)> |
<!ELEMENT ProgressionOrder (#PCDATA)> |
<!-- Defined Progression Order Values are: --> |
<!-- 0 = LRCP; 1 = RLCP; 2 = RPCL; 3 = PCRL; 4 = CPRL --> |
<!-- where L = "layer", R = "resolution level", C = "component", P = "position". --> |
<!ELEMENT NumberOfLayers (#PCDATA)> |
<!ELEMENT MultipleComponentTransformation (#PCDATA)> |
<!-- For MCT, 0 = none, 1 = transform first 3 components for efficiency, per Part I Annex G --> |
<!ELEMENT SPcod (NumberOfDecompositionLevels,CodeblockWidth,CodeblockHeight,CodeblockStyle,Transformation)> |
<!ELEMENT NumberOfDecompositionLevels (#PCDATA)> |
<!ELEMENT CodeblockWidth (#PCDATA)> <!-- CBW and CBH are non-negative, and summed cannot exceed 8 --> |
<!ELEMENT CodeblockHeight (#PCDATA)> <!-- Codeblock dimension is 2^(value + 2) --> |
<!ELEMENT CodeblockStyle (#PCDATA)> |
<!-- For CodeblockStyle, bits mean (with value 1=feature on, 0=off): --> |
<!-- bit 0: Selective arithmetic coding bypass. --> |
<!-- bit 1: Reset context probabilities on coding pass boundaries. --> |
<!-- bit 2: Termination on each coding pass. --> |
<!-- bit 3: Vertically causal context. --> |
<!-- bit 4: Predictable termination. --> |
<!-- bit 5: Segmentation symbols are used. --> |
<!ELEMENT Transformation (#PCDATA)> <!-- For Transformation, 0="9-7 irreversible filter", 1="5-3 reversible filter" --> |
<!-- mj2_to_metadata implementation always reports component[0] as using default COD, --> |
<!-- and any other component, with main-header style values different from [0], as COC. --> |
<!ELEMENT QuantizationDefault (Sqcd,SPqcd)> |
<!ATTLIST QuantizationDefault Marker CDATA #FIXED "QCD"> |
<!ELEMENT Sqcd (AsHex | (AsHex,QuantizationStyle,NumberOfGuardBits) | (QuantizationStyle,NumberOfGuardBits))> |
<!ELEMENT QuantizationStyle (#PCDATA)> <!-- Default quantization style for all components. --> |
<!-- Quantization style (in Sqcd's low 5 bits) may be: --> |
<!-- 0 = No quantization. SPqcd size = 8 bits--> |
<!-- 1 = Scalar derived (values signaled for N(L)LL subband only). Use Eq. E.5. SPqcd size = 16. --> |
<!-- 2 = Scalar expounded (values signaled for each subband). SPqcd size = 16. --> |
<!ELEMENT NumberOfGuardBits (#PCDATA)> <!-- 0-7 guard bits allowed (stored in Sqcd's high 3 bits) --> |
<!ELEMENT SPqcd (ReversibleStepSizeValue | QuantizationStepSizeValues )> <!-- TO DO: Irreversible choices --> |
<!ELEMENT ReversibleStepSizeValue (DynamicRangeExponent+)> |
<!-- Current mj2_to_metadata implementation dumps entire internal table, --> |
<!-- until an exponent with zero value is reached. --> |
<!-- Exponent epsilon(b) of reversible dynamic range. --> |
<!-- Hex value is as stored, in high-order 5 bits. --> |
<!ELEMENT DynamicRangeExponent (AsHex | (AsHex, AsDecimal) | AsDecimal)> |
<!ATTLIST DynamicRangeExponent Subband CDATA #REQUIRED> |
<!ELEMENT QuantizationStepSizeValues (QuantizationValues+, CalculatedExponent*)> <!-- Calculated exponents iff only subband 0 reported --> |
<!ELEMENT QuantizationValues (AsHex | (AsHex,Exponent,Mantissa) | (Exponent,Mantissa))> |
<!ATTLIST QuantizationValues Subband CDATA #REQUIRED> |
<!ELEMENT Exponent (#PCDATA)> |
<!ELEMENT Mantissa (#PCDATA)> |
<!ELEMENT CalculatedExponent (#PCDATA)> |
<!ATTLIST CalculatedExponent Subband CDATA #REQUIRED> |
<!-- /QuantizationDefault --> |
<!-- mj2_to_metadata implementation always reports component[0] as using default QCD, --> |
<!-- and any other component, with main-header quantization values different from [0], as QCC. --> |
<!ELEMENT QuantizationComponent (Sqcc,SPqcc)> |
<!ATTLIST QuantizationComponent Marker CDATA #FIXED "QCC"> |
<!ATTLIST QuantizationComponent Component CDATA #REQUIRED> |
<!ELEMENT Sqcc (AsHex | (AsHex,QuantizationStyle,NumberOfGuardBits) | (QuantizationStyle,NumberOfGuardBits))> |
<!ELEMENT SPqcc (ReversibleStepSizeValue | QuantizationStepSizeValues )> <!-- TO DO: Irreversible choices --> |
<!-- /QuantizationComponent --> |
<!-- Don't know if MJ2 files can have regions of interest. Assume yes --> |
<!ELEMENT RegionOfInterest (Srgn,Crgn,Sprgn)> <!-- Optional in main header, at most 1 per component --> |
<!ATTLIST RegionOfInterest Marker CDATA #FIXED "RGN"> |
<!ELEMENT Srgn (#PCDATA)> <!-- ROI style. Only style=0 defined: Implicit ROI (max. shift) --> |
<!ELEMENT Crgn (#PCDATA)> <!-- Zero-based component number. --> |
<!ELEMENT SPrgn (#PCDATA)> <!-- Implicit ROI shift, i.e., binary shifting of ROI coefficients above background. --> |
<!-- </RegionOfInterest> --> |
<!ELEMENT ProgressionOrderChange (Progression+)> <!-- Optional in main header, at most 1 per component (but impl allows more?) --> |
<!ATTLIST ProgressionOrderChange Marker CDATA #REQUIRED> |
<!ELEMENT Progression (RSpoc,CSpoc,LYEpoc,REpoc,CEpoc,Ppoc)> |
<!ATTLIST Progression Num CDATA #REQUIRED> |
<!ELEMENT RSpoc (#PCDATA)> <!-- Resolution level index (inclusive) for progression start. Range: 0 to 33 --> |
<!ELEMENT CSpoc (#PCDATA)> <!-- Component index (inclusive) for progression start. --> |
<!ELEMENT LYEpoc (#PCDATA)> <!-- Layer index (exclusive) for progression end. --> |
<!ELEMENT REpoc (#PCDATA)> <!-- Resolution level index (exclusive) for progression end. Range: RSpoc to 33 --> |
<!ELEMENT CEpoc (#PCDATA)> <!-- Component index (exclusive) for progression end. Minimum: CSpoc --> |
<!ELEMENT Ppoc (#PCDATA)> <!-- Defined Progression Order Values are: --> |
<!-- 0 = LRCP; 1 = RLCP; 2 = RPCL; 3 = PCRL; 4 = CPRL --> |
<!-- where L = "layer", R = "resolution level", C = "component", P = "position". --> |
<!-- </Progression>, </ProgressionOrderChange --> |
<!-- /MainHeader --> |
<!ELEMENT TilePartHeaders (TilePartHeader+)> |
<!ATTLIST TilePartHeaders Count CDATA #REQUIRED> |
<!ELEMENT TilePartHeader (StartOfTilePart,CodingStyleDefault,QuantizationDefault,QuantizationComponent*,RegionOfInterest?,ProgressionOrderChange*,StartOfData)> |
<!ATTLIST TilePartHeader Num CDATA #REQUIRED> |
<!ATTLIST TilePartHeader ID CDATA #REQUIRED> |
<!ELEMENT StartOfTilePart EMPTY> |
<!ATTLIST StartOfTilePart Marker CDATA #FIXED "SOT"> |
<!-- CodingStyleDefault, QuantizationDefault, QuantizationComponent already defined --> |
<!-- mj2_to_metadata implementation always reports component[0] as using default QCD, --> |
<!-- and any other component, with tile-part-header quantization values different from [0], as QCC. --> |
<!ELEMENT StartOfData EMPTY> <!-- always empty for now --> |
<!ATTLIST StartOfData Marker CDATA #FIXED "SOD"> |
<!-- Tile-part bitstream, not shown, follows tile-part header and SOD marker. --> |
<!-- /TilePartHeader, /TilePartHeaders, /JP2_Frame --> |
<!-- </Track> --> |
|
<!-- to come: |
<MovieExtends mvek> // possibly not in Simple Profile |
<UserDataBox udat> contains <CopyrightBox cprt> |
--> |
<!-- /MovieBox --> |
<!-- To come: |
<mdat> |
<moof> // probably not in Simple Profile |
<free> |
<skip> |
--> |
<!-- </MJ2_File> --> |