| 30,55 → 30,66 |
|---|
| ; Description |
| ; entry point for system PCI calls |
| ;*************************************************************************** |
| ;mmio_pci_addr equ 0x400 ; set actual PCI address here to activate user-MMIO |
| |
| |
| align 4 |
| |
| pci_api: |
| |
| cmp [pci_access_enabled],1 |
| jne no_pci_access_for_applications |
| cmp [pci_access_enabled],1 |
| jne no_pci_access_for_applications |
| |
| or al,al |
| jnz pci_fn_1 |
| ; PCI function 0: get pci version (AH.AL) |
| movzx eax,word [BOOT_VAR+0x9022] |
| ret |
| or al,al |
| jnz pci_fn_1 |
| ; PCI function 0: get pci version (AH.AL) |
| movzx eax,word [BOOT_VAR+0x9022] |
| ret |
| |
| pci_fn_1: |
| cmp al,1 |
| jnz pci_fn_2 |
| cmp al,1 |
| jnz pci_fn_2 |
| |
| ; PCI function 1: get last bus in AL |
| mov al,[BOOT_VAR+0x9021] |
| ret |
| ; PCI function 1: get last bus in AL |
| mov al,[BOOT_VAR+0x9021] |
| ret |
| |
| pci_fn_2: |
| cmp al,2 |
| jne pci_fn_3 |
| ; PCI function 2: get pci access mechanism |
| mov al,[BOOT_VAR+0x9020] |
| ret |
| cmp al,2 |
| jne pci_fn_3 |
| ; PCI function 2: get pci access mechanism |
| mov al,[BOOT_VAR+0x9020] |
| ret |
| pci_fn_3: |
| |
| cmp al,4 |
| jz pci_read_reg ;byte |
| cmp al,5 |
| jz pci_read_reg ;word |
| cmp al,6 |
| jz pci_read_reg ;dword |
| cmp al,4 |
| jz pci_read_reg ;byte |
| cmp al,5 |
| jz pci_read_reg ;word |
| cmp al,6 |
| jz pci_read_reg ;dword |
| |
| cmp al,8 |
| jz pci_write_reg ;byte |
| cmp al,9 |
| jz pci_write_reg ;word |
| cmp al,10 |
| jz pci_write_reg ;dword |
| cmp al,8 |
| jz pci_write_reg ;byte |
| cmp al,9 |
| jz pci_write_reg ;word |
| cmp al,10 |
| jz pci_write_reg ;dword |
| |
| if defined mmio_pci_addr |
| cmp al,11 ; user-level MMIO functions |
| jz pci_mmio_init |
| cmp al,12 |
| jz pci_mmio_map |
| cmp al,13 |
| jz pci_mmio_unmap |
| end if |
| |
| no_pci_access_for_applications: |
| |
| mov eax,-1 |
| or eax,-1 |
| |
| ret |
| ret |
| |
| ;*************************************************************************** |
| ; Function |
| 96,10 → 107,10 |
|---|
| align 4 |
| |
| pci_make_config_cmd: |
| shl eax,8 ; move bus to bits 16-23 |
| mov ax,bx ; combine all |
| shl eax,8 ; move bus to bits 16-23 |
| mov ax,bx ; combine all |
| and eax,0xffffff |
| or eax,0x80000000 |
| or eax,0x80000000 |
| ret |
| |
| ;*************************************************************************** |
| 116,120 → 127,120 |
|---|
| align 4 |
| |
| pci_read_reg: |
| cmp byte [BOOT_VAR+0x9020],2 ;what mechanism will we use? |
| je pci_read_reg_2 |
| cmp byte [BOOT_VAR+0x9020],2 ;what mechanism will we use? |
| je pci_read_reg_2 |
| |
| ; mechanism 1 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| ; mechanism 1 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| |
| call pci_make_config_cmd |
| mov ebx,eax |
| ; get current state |
| mov dx,0xcf8 |
| in eax, dx |
| push eax |
| ; set up addressing to config data |
| mov eax,ebx |
| and al,0xfc ; make address dword-aligned |
| out dx,eax |
| ; get requested DWORD of config data |
| mov dl,0xfc |
| and bl,3 |
| or dl,bl ; add to port address first 2 bits of register address |
| call pci_make_config_cmd |
| mov ebx,eax |
| ; get current state |
| mov dx,0xcf8 |
| in eax, dx |
| push eax |
| ; set up addressing to config data |
| mov eax,ebx |
| and al,0xfc ; make address dword-aligned |
| out dx,eax |
| ; get requested DWORD of config data |
| mov dl,0xfc |
| and bl,3 |
| or dl,bl ; add to port address first 2 bits of register address |
| |
| or esi,esi |
| jz pci_read_byte1 |
| cmp esi,1 |
| jz pci_read_word1 |
| cmp esi,2 |
| jz pci_read_dword1 |
| jmp pci_fin_read1 |
| or esi,esi |
| jz pci_read_byte1 |
| cmp esi,1 |
| jz pci_read_word1 |
| cmp esi,2 |
| jz pci_read_dword1 |
| jmp pci_fin_read1 |
| |
| pci_read_byte1: |
| in al,dx |
| jmp pci_fin_read1 |
| in al,dx |
| jmp pci_fin_read1 |
| pci_read_word1: |
| in ax,dx |
| jmp pci_fin_read1 |
| in ax,dx |
| jmp pci_fin_read1 |
| pci_read_dword1: |
| in eax,dx |
| jmp pci_fin_read1 |
| in eax,dx |
| jmp pci_fin_read1 |
| pci_fin_read1: |
| ; restore configuration control |
| xchg eax,[esp] |
| mov dx,0xcf8 |
| out dx,eax |
| ; restore configuration control |
| xchg eax,[esp] |
| mov dx,0xcf8 |
| out dx,eax |
| |
| pop eax |
| pop esi |
| ret |
| pop eax |
| pop esi |
| ret |
| pci_read_reg_2: |
| |
| test bh,128 ;mech#2 only supports 16 devices per bus |
| jnz pci_read_reg_err |
| test bh,128 ;mech#2 only supports 16 devices per bus |
| jnz pci_read_reg_err |
| |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| |
| push eax |
| ;store current state of config space |
| mov dx,0xcf8 |
| in al,dx |
| mov ah,al |
| mov dl,0xfa |
| in al,dx |
| push eax |
| ;store current state of config space |
| mov dx,0xcf8 |
| in al,dx |
| mov ah,al |
| mov dl,0xfa |
| in al,dx |
| |
| xchg eax,[esp] |
| ; out 0xcfa,bus |
| mov al,ah |
| out dx,al |
| ; out 0xcf8,0x80 |
| mov dl,0xf8 |
| mov al,0x80 |
| out dx,al |
| ; compute addr |
| shr bh,3 ; func is ignored in mechanism 2 |
| or bh,0xc0 |
| mov dx,bx |
| xchg eax,[esp] |
| ; out 0xcfa,bus |
| mov al,ah |
| out dx,al |
| ; out 0xcf8,0x80 |
| mov dl,0xf8 |
| mov al,0x80 |
| out dx,al |
| ; compute addr |
| shr bh,3 ; func is ignored in mechanism 2 |
| or bh,0xc0 |
| mov dx,bx |
| |
| or esi,esi |
| jz pci_read_byte2 |
| cmp esi,1 |
| jz pci_read_word2 |
| cmp esi,2 |
| jz pci_read_dword2 |
| jmp pci_fin_read2 |
| or esi,esi |
| jz pci_read_byte2 |
| cmp esi,1 |
| jz pci_read_word2 |
| cmp esi,2 |
| jz pci_read_dword2 |
| jmp pci_fin_read2 |
| |
| pci_read_byte2: |
| in al,dx |
| jmp pci_fin_read2 |
| in al,dx |
| jmp pci_fin_read2 |
| pci_read_word2: |
| in ax,dx |
| jmp pci_fin_read2 |
| in ax,dx |
| jmp pci_fin_read2 |
| pci_read_dword2: |
| in eax,dx |
| in eax,dx |
| ; jmp pci_fin_read2 |
| pci_fin_read2: |
| |
| ; restore configuration space |
| xchg eax,[esp] |
| mov dx,0xcfa |
| out dx,al |
| mov dl,0xf8 |
| mov al,ah |
| out dx,al |
| ; restore configuration space |
| xchg eax,[esp] |
| mov dx,0xcfa |
| out dx,al |
| mov dl,0xf8 |
| mov al,ah |
| out dx,al |
| |
| pop eax |
| pop esi |
| ret |
| pop eax |
| pop esi |
| ret |
| |
| pci_read_reg_err: |
| xor eax,eax |
| dec eax |
| ret |
| xor eax,eax |
| dec eax |
| ret |
| |
| |
| ;*************************************************************************** |
| 247,150 → 258,281 |
|---|
| align 4 |
| |
| pci_write_reg: |
| cmp byte [BOOT_VAR+0x9020],2 ;what mechanism will we use? |
| je pci_write_reg_2 |
| cmp byte [BOOT_VAR+0x9020],2 ;what mechanism will we use? |
| je pci_write_reg_2 |
| |
| ; mechanism 1 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| ; mechanism 1 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| |
| call pci_make_config_cmd |
| mov ebx,eax |
| ; get current state into ecx |
| mov dx,0xcf8 |
| in eax, dx |
| push eax |
| ; set up addressing to config data |
| mov eax,ebx |
| and al,0xfc ; make address dword-aligned |
| out dx,eax |
| ; write DWORD of config data |
| mov dl,0xfc |
| and bl,3 |
| or dl,bl |
| mov eax,ecx |
| call pci_make_config_cmd |
| mov ebx,eax |
| ; get current state into ecx |
| mov dx,0xcf8 |
| in eax, dx |
| push eax |
| ; set up addressing to config data |
| mov eax,ebx |
| and al,0xfc ; make address dword-aligned |
| out dx,eax |
| ; write DWORD of config data |
| mov dl,0xfc |
| and bl,3 |
| or dl,bl |
| mov eax,ecx |
| |
| or esi,esi |
| jz pci_write_byte1 |
| cmp esi,1 |
| jz pci_write_word1 |
| cmp esi,2 |
| jz pci_write_dword1 |
| jmp pci_fin_write1 |
| or esi,esi |
| jz pci_write_byte1 |
| cmp esi,1 |
| jz pci_write_word1 |
| cmp esi,2 |
| jz pci_write_dword1 |
| jmp pci_fin_write1 |
| |
| pci_write_byte1: |
| out dx,al |
| jmp pci_fin_write1 |
| out dx,al |
| jmp pci_fin_write1 |
| pci_write_word1: |
| out dx,ax |
| jmp pci_fin_write1 |
| out dx,ax |
| jmp pci_fin_write1 |
| pci_write_dword1: |
| out dx,eax |
| jmp pci_fin_write1 |
| out dx,eax |
| jmp pci_fin_write1 |
| pci_fin_write1: |
| |
| ; restore configuration control |
| pop eax |
| mov dl,0xf8 |
| out dx,eax |
| ; restore configuration control |
| pop eax |
| mov dl,0xf8 |
| out dx,eax |
| |
| xor eax,eax |
| pop esi |
| xor eax,eax |
| pop esi |
| |
| ret |
| ret |
| pci_write_reg_2: |
| |
| test bh,128 ;mech#2 only supports 16 devices per bus |
| jnz pci_write_reg_err |
| test bh,128 ;mech#2 only supports 16 devices per bus |
| jnz pci_write_reg_err |
| |
| |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| push esi ; save register size into ESI |
| mov esi,eax |
| and esi,3 |
| |
| push eax |
| ;store current state of config space |
| mov dx,0xcf8 |
| in al,dx |
| mov ah,al |
| mov dl,0xfa |
| in al,dx |
| xchg eax,[esp] |
| ; out 0xcfa,bus |
| mov al,ah |
| out dx,al |
| ; out 0xcf8,0x80 |
| mov dl,0xf8 |
| mov al,0x80 |
| out dx,al |
| ; compute addr |
| shr bh,3 ; func is ignored in mechanism 2 |
| or bh,0xc0 |
| mov dx,bx |
| ; write register |
| mov eax,ecx |
| push eax |
| ;store current state of config space |
| mov dx,0xcf8 |
| in al,dx |
| mov ah,al |
| mov dl,0xfa |
| in al,dx |
| xchg eax,[esp] |
| ; out 0xcfa,bus |
| mov al,ah |
| out dx,al |
| ; out 0xcf8,0x80 |
| mov dl,0xf8 |
| mov al,0x80 |
| out dx,al |
| ; compute addr |
| shr bh,3 ; func is ignored in mechanism 2 |
| or bh,0xc0 |
| mov dx,bx |
| ; write register |
| mov eax,ecx |
| |
| or esi,esi |
| jz pci_write_byte2 |
| cmp esi,1 |
| jz pci_write_word2 |
| cmp esi,2 |
| jz pci_write_dword2 |
| jmp pci_fin_write2 |
| or esi,esi |
| jz pci_write_byte2 |
| cmp esi,1 |
| jz pci_write_word2 |
| cmp esi,2 |
| jz pci_write_dword2 |
| jmp pci_fin_write2 |
| |
| pci_write_byte2: |
| out dx,al |
| jmp pci_fin_write2 |
| out dx,al |
| jmp pci_fin_write2 |
| pci_write_word2: |
| out dx,ax |
| jmp pci_fin_write2 |
| out dx,ax |
| jmp pci_fin_write2 |
| pci_write_dword2: |
| out dx,eax |
| jmp pci_fin_write2 |
| out dx,eax |
| jmp pci_fin_write2 |
| pci_fin_write2: |
| ; restore configuration space |
| pop eax |
| mov dx,0xcfa |
| out dx,al |
| mov dl,0xf8 |
| mov al,ah |
| out dx,al |
| ; restore configuration space |
| pop eax |
| mov dx,0xcfa |
| out dx,al |
| mov dl,0xf8 |
| mov al,ah |
| out dx,al |
| |
| xor eax,eax |
| pop esi |
| ret |
| xor eax,eax |
| pop esi |
| ret |
| |
| pci_write_reg_err: |
| xor eax,eax |
| dec eax |
| ret |
| xor eax,eax |
| dec eax |
| ret |
| |
| if defined mmio_pci_addr ; must be set above |
| ;*************************************************************************** |
| ; Function |
| ; pci_mmio_init |
| ; |
| ; Description |
| ; IN: bx = device's PCI bus address (bbbbbbbbdddddfff) |
| ; Returns eax = user heap space available (bytes) |
| ; Error codes |
| ; eax = -1 : PCI user access blocked, |
| ; eax = -2 : device not registered for uMMIO service |
| ; eax = -3 : user heap initialization failure |
| ;*************************************************************************** |
| pci_mmio_init: |
| cmp bx, mmio_pci_addr |
| jz @f |
| mov eax,-2 |
| ret |
| @@: |
| call init_heap ; (if not initialized yet) |
| or eax,eax |
| jz @f |
| ret |
| @@: |
| mov eax,-3 |
| ret |
| |
| |
| ;*************************************************************************** |
| ; Function |
| ; pci_mmio_map |
| ; |
| ; Description |
| ; maps a block of PCI memory to user-accessible linear address |
| ; |
| ; WARNING! This VERY EXPERIMENTAL service is for one chosen PCI device only! |
| ; The target device address should be set in kernel var mmio_pci_addr |
| ; |
| ; IN: ah = BAR#; |
| ; IN: ebx = block size (bytes); |
| ; IN: ecx = offset in MMIO block (in 4K-pages, to avoid misaligned pages); |
| ; |
| ; Returns eax = MMIO block's linear address in the userspace (if no error) |
| ; |
| ; |
| ; Error codes |
| ; eax = -1 : user access to PCI blocked, |
| ; eax = -2 : an invalid BAR register referred |
| ; eax = -3 : no i/o space on that BAR |
| ; eax = -4 : a port i/o BAR register referred |
| ; eax = -5 : dynamic userspace allocation problem |
| ;*************************************************************************** |
| |
| pci_mmio_map: |
| and edx,0x0ffff |
| cmp ah,6 |
| jc .bar_0_5 |
| jz .bar_rom |
| mov eax,-2 |
| ret |
| .bar_rom: |
| mov ah, 8 ; bar6 = Expansion ROM base address |
| .bar_0_5: |
| push ecx |
| add ebx, 4095 |
| and ebx,-4096 |
| push ebx |
| mov bl, ah ; bl = BAR# (0..5), however bl=8 for BAR6 |
| shl bl, 1 |
| shl bl, 1 |
| add bl, 0x10 ; now bl = BAR offset in PCI config. space |
| mov ax, mmio_pci_addr |
| mov bh, al ; bh = dddddfff |
| mov al, 2 ; al : DW to read |
| call pci_read_reg |
| or eax, eax |
| jnz @f |
| mov eax,-3 ; empty I/O space |
| jmp mmio_ret_fail |
| @@: |
| test eax, 1 |
| jz @f |
| mov eax,-4 ; damned ports (not MMIO space) |
| jmp mmio_ret_fail |
| @@: |
| pop ecx ; ecx = block size, bytes (expanded to whole page) |
| mov ebx, ecx ; user_alloc destroys eax, ecx, edx, but saves ebx |
| push eax ; store MMIO physical address + keep 2DWords in the stack |
| stdcall user_alloc, ecx |
| or eax, eax |
| jnz mmio_map_over |
| mov eax,-5 ; problem with page allocation |
| |
| mmio_ret_fail: |
| pop ecx |
| pop edx |
| ret |
| |
| mmio_map_over: |
| mov ecx, ebx ; ecx = size (bytes, expanded to whole page) |
| shr ecx, 12 ; ecx = number of pages |
| mov ebx, eax ; ebx = linear address |
| pop eax ; eax = MMIO start |
| pop edx ; edx = MMIO shift (pages) |
| shl edx, 12 ; edx = MMIO shift (bytes) |
| add eax, edx ; eax = uMMIO physical address |
| or eax, PG_SHARED |
| or eax, PG_UW |
| or eax, PG_NOCACHE |
| mov edi, ebx |
| call commit_pages |
| mov eax, edi |
| ret |
| |
| ;*************************************************************************** |
| ; Function |
| ; pci_mmio_unmap_page |
| ; |
| ; Description |
| ; unmaps the linear space previously tied to a PCI memory block |
| ; |
| ; IN: ebx = linear address of space previously allocated by pci_mmio_map |
| ; returns eax = 1 if successfully unmapped |
| ; |
| ; Error codes |
| ; eax = -1 if no user PCI access allowed, |
| ; eax = 0 if unmapping failed |
| ;*************************************************************************** |
| |
| pci_mmio_unmap: |
| stdcall user_free, ebx |
| ret |
| |
| end if |
| |
| ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= |
| |
| uglobal |
| align 4 |
| ; VendID (2), DevID (2), Revision = 0 (1), Class Code (3), FNum (1), Bus (1) |
| pci_emu_dat: times 30*10 db 0 |
| |
| endg |
| ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= |
| align 4 |
| sys_pcibios: |
| xchg ebx, eax |
| xchg ecx, eax |
| xchg edx, eax |
| xchg esi, eax |
| xchg edi, eax |
| cmp [pci_access_enabled], 1 |
| jne .unsupported_func |
| cmp [pci_bios_entry], 0 |
| jne .unsupported_func |
| cmp [pci_bios_entry], 0 |
| jz .emulate_bios |
| |
| push ds |
| mov ax, pci_data_sel |
| mov ds, ax |
| mov eax, ebp |
| mov ah, 0B1h |
| call pword [cs:pci_bios_entry] |
| pop ds |
| push ds |
| mov ax, pci_data_sel |
| mov ds, ax |
| mov eax, ebp |
| mov ah, 0B1h |
| call pword [cs:pci_bios_entry] |
| pop ds |
| |
| jmp .return |
| ;-=-=-=-=-=-=-=-= |
| 398,10 → 540,10 |
|---|
| cmp ebp, 1 ; PCI_FUNCTION_ID |
| jnz .not_PCI_BIOS_PRESENT |
| mov edx, 'PCI ' |
| mov al, [OS_BASE+0x2F0000 + 0x9020] |
| mov bx, [OS_BASE+0x2F0000 + 0x9022] |
| mov cl, [OS_BASE+0x2F0000 + 0x9021] |
| xor ah, ah |
| mov al, [OS_BASE+0x2F0000 + 0x9020] |
| mov bx, [OS_BASE+0x2F0000 + 0x9022] |
| mov cl, [OS_BASE+0x2F0000 + 0x9021] |
| xor ah, ah |
| jmp .return_abcd |
| |
| .not_PCI_BIOS_PRESENT: |
| 415,7 → 557,7 |
|---|
| dec si |
| jns ..no |
| mov bx, [ebx + 4] |
| xor ah, ah |
| xor ah, ah |
| jmp .return_ab |
| ..no: cmp word[ebx], 0 |
| je ..dev_not_found |
| 430,10 → 572,10 |
|---|
| jne .not_FIND_PCI_CLASS_CODE |
| mov esi, pci_emu_dat |
| shl ecx, 8 |
| ..nxt2: cmp [esi], ecx |
| ..nxt2: cmp [esi], ecx |
| jne ..no2 |
| mov bx, [esi] |
| xor ah, ah |
| xor ah, ah |
| jmp .return_ab |
| ..no2: cmp dword[esi], 0 |
| je ..dev_not_found |
| 445,11 → 587,11 |
|---|
| jb .not_READ_CONFIG |
| cmp ebp, 0x0A |
| ja .not_READ_CONFIG |
| mov eax, ebp |
| mov ah, bh |
| mov edx, edi |
| mov bh, bl |
| mov bl, dl |
| mov eax, ebp |
| mov ah, bh |
| mov edx, edi |
| mov bh, bl |
| mov bl, dl |
| call pci_read_reg |
| mov ecx, eax |
| xor ah, ah ; SUCCESSFUL |
| 459,11 → 601,11 |
|---|
| jb .not_WRITE_CONFIG |
| cmp ebp, 0x0D |
| ja .not_WRITE_CONFIG |
| lea eax, [ebp+1] |
| mov ah, bh |
| mov edx, edi |
| mov bh, bl |
| mov bl, dl |
| lea eax, [ebp+1] |
| mov ah, bh |
| mov edx, edi |
| mov bh, bl |
| mov bl, dl |
| call pci_write_reg |
| xor ah, ah ; SUCCESSFUL |
| jmp .return_abc |
| 470,14 → 612,14 |
|---|
| .not_WRITE_CONFIG: |
| .unsupported_func: |
| mov ah, 0x81 ; FUNC_NOT_SUPPORTED |
| .return:mov dword[esp + 8 ], edi |
| mov dword[esp + 12], esi |
| .return:mov dword[esp + 4 ], edi |
| mov dword[esp + 8], esi |
| .return_abcd: |
| mov dword[esp + 28], edx |
| mov dword[esp + 24], edx |
| .return_abc: |
| mov dword[esp + 32], ecx |
| mov dword[esp + 28], ecx |
| .return_ab: |
| mov dword[esp + 24], ebx |
| mov dword[esp + 20], ebx |
| .return_a: |
| mov dword[esp + 36], eax |
| mov dword[esp + 32], eax |
| ret |
| Property changes: |
|---|
| Modified: svn:keywords |
|---|
| -Revision |
|---|
| \ No newline at end of property |
|---|
| +Rev |
|---|
| \ No newline at end of property |
|---|
| Added: svn:mergeinfo |
|---|