0,0 → 1,2612 |
# Doxyfile 1.9.1 |
|
# This file describes the settings to be used by the documentation system |
# doxygen (www.doxygen.org) for a project. |
# |
# All text after a double hash (##) is considered a comment and is placed in |
# front of the TAG it is preceding. |
# |
# All text after a single hash (#) is considered a comment and will be ignored. |
# The format is: |
# TAG = value [value, ...] |
# For lists, items can also be appended using: |
# TAG += value [value, ...] |
# Values that contain spaces should be placed between quotes (\" \"). |
|
#--------------------------------------------------------------------------- |
# Project related configuration options |
#--------------------------------------------------------------------------- |
|
# This tag specifies the encoding used for all characters in the configuration |
# file that follow. The default is UTF-8 which is also the encoding used for all |
# text before the first occurrence of this tag. Doxygen uses libiconv (or the |
# iconv built into libc) for the transcoding. See |
# https://www.gnu.org/software/libiconv/ for the list of possible encodings. |
# The default value is: UTF-8. |
|
DOXYFILE_ENCODING = UTF-8 |
|
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by |
# double-quotes, unless you are using Doxywizard) that should identify the |
# project for which the documentation is generated. This name is used in the |
# title of most generated pages and in a few other places. |
# The default value is: My Project. |
|
PROJECT_NAME = "My Project" |
|
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This |
# could be handy for archiving the generated documentation or if some version |
# control system is used. |
|
PROJECT_NUMBER = |
|
# Using the PROJECT_BRIEF tag one can provide an optional one line description |
# for a project that appears at the top of each page and should give viewer a |
# quick idea about the purpose of the project. Keep the description short. |
|
PROJECT_BRIEF = |
|
# With the PROJECT_LOGO tag one can specify a logo or an icon that is included |
# in the documentation. The maximum height of the logo should not exceed 55 |
# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy |
# the logo to the output directory. |
|
PROJECT_LOGO = |
|
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path |
# into which the generated documentation will be written. If a relative path is |
# entered, it will be relative to the location where doxygen was started. If |
# left blank the current directory will be used. |
|
OUTPUT_DIRECTORY = |
|
# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- |
# directories (in 2 levels) under the output directory of each output format and |
# will distribute the generated files over these directories. Enabling this |
# option can be useful when feeding doxygen a huge amount of source files, where |
# putting all generated files in the same directory would otherwise causes |
# performance problems for the file system. |
# The default value is: NO. |
|
CREATE_SUBDIRS = NO |
|
# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII |
# characters to appear in the names of generated files. If set to NO, non-ASCII |
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode |
# U+3044. |
# The default value is: NO. |
|
ALLOW_UNICODE_NAMES = NO |
|
# The OUTPUT_LANGUAGE tag is used to specify the language in which all |
# documentation generated by doxygen is written. Doxygen will use this |
# information to generate all constant output in the proper language. |
# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, |
# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), |
# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, |
# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), |
# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, |
# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, |
# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, |
# Ukrainian and Vietnamese. |
# The default value is: English. |
|
OUTPUT_LANGUAGE = English |
|
# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all |
# documentation generated by doxygen is written. Doxygen will use this |
# information to generate all generated output in the proper direction. |
# Possible values are: None, LTR, RTL and Context. |
# The default value is: None. |
|
OUTPUT_TEXT_DIRECTION = None |
|
# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member |
# descriptions after the members that are listed in the file and class |
# documentation (similar to Javadoc). Set to NO to disable this. |
# The default value is: YES. |
|
BRIEF_MEMBER_DESC = YES |
|
# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief |
# description of a member or function before the detailed description |
# |
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
# brief descriptions will be completely suppressed. |
# The default value is: YES. |
|
REPEAT_BRIEF = YES |
|
# This tag implements a quasi-intelligent brief description abbreviator that is |
# used to form the text in various listings. Each string in this list, if found |
# as the leading text of the brief description, will be stripped from the text |
# and the result, after processing the whole list, is used as the annotated |
# text. Otherwise, the brief description is used as-is. If left blank, the |
# following values are used ($name is automatically replaced with the name of |
# the entity):The $name class, The $name widget, The $name file, is, provides, |
# specifies, contains, represents, a, an and the. |
|
ABBREVIATE_BRIEF = "The $name class" \ |
"The $name widget" \ |
"The $name file" \ |
is \ |
provides \ |
specifies \ |
contains \ |
represents \ |
a \ |
an \ |
the |
|
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
# doxygen will generate a detailed section even if there is only a brief |
# description. |
# The default value is: NO. |
|
ALWAYS_DETAILED_SEC = NO |
|
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
# inherited members of a class in the documentation of that class as if those |
# members were ordinary class members. Constructors, destructors and assignment |
# operators of the base classes will not be shown. |
# The default value is: NO. |
|
INLINE_INHERITED_MEMB = NO |
|
# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path |
# before files name in the file list and in the header files. If set to NO the |
# shortest path that makes the file name unique will be used |
# The default value is: YES. |
|
FULL_PATH_NAMES = YES |
|
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. |
# Stripping is only done if one of the specified strings matches the left-hand |
# part of the path. The tag can be used to show relative paths in the file list. |
# If left blank the directory from which doxygen is run is used as the path to |
# strip. |
# |
# Note that you can specify absolute paths here, but also relative paths, which |
# will be relative from the directory where doxygen is started. |
# This tag requires that the tag FULL_PATH_NAMES is set to YES. |
|
STRIP_FROM_PATH = |
|
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the |
# path mentioned in the documentation of a class, which tells the reader which |
# header file to include in order to use a class. If left blank only the name of |
# the header file containing the class definition is used. Otherwise one should |
# specify the list of include paths that are normally passed to the compiler |
# using the -I flag. |
|
STRIP_FROM_INC_PATH = |
|
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but |
# less readable) file names. This can be useful is your file systems doesn't |
# support long names like on DOS, Mac, or CD-ROM. |
# The default value is: NO. |
|
SHORT_NAMES = NO |
|
# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the |
# first line (until the first dot) of a Javadoc-style comment as the brief |
# description. If set to NO, the Javadoc-style will behave just like regular Qt- |
# style comments (thus requiring an explicit @brief command for a brief |
# description.) |
# The default value is: NO. |
|
JAVADOC_AUTOBRIEF = NO |
|
# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line |
# such as |
# /*************** |
# as being the beginning of a Javadoc-style comment "banner". If set to NO, the |
# Javadoc-style will behave just like regular comments and it will not be |
# interpreted by doxygen. |
# The default value is: NO. |
|
JAVADOC_BANNER = NO |
|
# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first |
# line (until the first dot) of a Qt-style comment as the brief description. If |
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus |
# requiring an explicit \brief command for a brief description.) |
# The default value is: NO. |
|
QT_AUTOBRIEF = NO |
|
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a |
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as |
# a brief description. This used to be the default behavior. The new default is |
# to treat a multi-line C++ comment block as a detailed description. Set this |
# tag to YES if you prefer the old behavior instead. |
# |
# Note that setting this tag to YES also means that rational rose comments are |
# not recognized any more. |
# The default value is: NO. |
|
MULTILINE_CPP_IS_BRIEF = NO |
|
# By default Python docstrings are displayed as preformatted text and doxygen's |
# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the |
# doxygen's special commands can be used and the contents of the docstring |
# documentation blocks is shown as doxygen documentation. |
# The default value is: YES. |
|
PYTHON_DOCSTRING = YES |
|
# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the |
# documentation from any documented member that it re-implements. |
# The default value is: YES. |
|
INHERIT_DOCS = YES |
|
# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new |
# page for each member. If set to NO, the documentation of a member will be part |
# of the file/class/namespace that contains it. |
# The default value is: NO. |
|
SEPARATE_MEMBER_PAGES = NO |
|
# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen |
# uses this value to replace tabs by spaces in code fragments. |
# Minimum value: 1, maximum value: 16, default value: 4. |
|
TAB_SIZE = 4 |
|
# This tag can be used to specify a number of aliases that act as commands in |
# the documentation. An alias has the form: |
# name=value |
# For example adding |
# "sideeffect=@par Side Effects:\n" |
# will allow you to put the command \sideeffect (or @sideeffect) in the |
# documentation, which will result in a user-defined paragraph with heading |
# "Side Effects:". You can put \n's in the value part of an alias to insert |
# newlines (in the resulting output). You can put ^^ in the value part of an |
# alias to insert a newline as if a physical newline was in the original file. |
# When you need a literal { or } or , in the value part of an alias you have to |
# escape them by means of a backslash (\), this can lead to conflicts with the |
# commands \{ and \} for these it is advised to use the version @{ and @} or use |
# a double escape (\\{ and \\}) |
|
ALIASES = |
|
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources |
# only. Doxygen will then generate output that is more tailored for C. For |
# instance, some of the names that are used will be different. The list of all |
# members will be omitted, etc. |
# The default value is: NO. |
|
OPTIMIZE_OUTPUT_FOR_C = NO |
|
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or |
# Python sources only. Doxygen will then generate output that is more tailored |
# for that language. For instance, namespaces will be presented as packages, |
# qualified scopes will look different, etc. |
# The default value is: NO. |
|
OPTIMIZE_OUTPUT_JAVA = NO |
|
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran |
# sources. Doxygen will then generate output that is tailored for Fortran. |
# The default value is: NO. |
|
OPTIMIZE_FOR_FORTRAN = NO |
|
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL |
# sources. Doxygen will then generate output that is tailored for VHDL. |
# The default value is: NO. |
|
OPTIMIZE_OUTPUT_VHDL = NO |
|
# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice |
# sources only. Doxygen will then generate output that is more tailored for that |
# language. For instance, namespaces will be presented as modules, types will be |
# separated into more groups, etc. |
# The default value is: NO. |
|
OPTIMIZE_OUTPUT_SLICE = NO |
|
# Doxygen selects the parser to use depending on the extension of the files it |
# parses. With this tag you can assign which parser to use for a given |
# extension. Doxygen has a built-in mapping, but you can override or extend it |
# using this tag. The format is ext=language, where ext is a file extension, and |
# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, |
# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL, |
# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: |
# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser |
# tries to guess whether the code is fixed or free formatted code, this is the |
# default for Fortran type files). For instance to make doxygen treat .inc files |
# as Fortran files (default is PHP), and .f files as C (default is Fortran), |
# use: inc=Fortran f=C. |
# |
# Note: For files without extension you can use no_extension as a placeholder. |
# |
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise |
# the files are not read by doxygen. When specifying no_extension you should add |
# * to the FILE_PATTERNS. |
# |
# Note see also the list of default file extension mappings. |
|
EXTENSION_MAPPING = inc=C asm=C |
|
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments |
# according to the Markdown format, which allows for more readable |
# documentation. See https://daringfireball.net/projects/markdown/ for details. |
# The output of markdown processing is further processed by doxygen, so you can |
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in |
# case of backward compatibilities issues. |
# The default value is: YES. |
|
MARKDOWN_SUPPORT = YES |
|
# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up |
# to that level are automatically included in the table of contents, even if |
# they do not have an id attribute. |
# Note: This feature currently applies only to Markdown headings. |
# Minimum value: 0, maximum value: 99, default value: 5. |
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. |
|
TOC_INCLUDE_HEADINGS = 5 |
|
# When enabled doxygen tries to link words that correspond to documented |
# classes, or namespaces to their corresponding documentation. Such a link can |
# be prevented in individual cases by putting a % sign in front of the word or |
# globally by setting AUTOLINK_SUPPORT to NO. |
# The default value is: YES. |
|
AUTOLINK_SUPPORT = YES |
|
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want |
# to include (a tag file for) the STL sources as input, then you should set this |
# tag to YES in order to let doxygen match functions declarations and |
# definitions whose arguments contain STL classes (e.g. func(std::string); |
# versus func(std::string) {}). This also make the inheritance and collaboration |
# diagrams that involve STL classes more complete and accurate. |
# The default value is: NO. |
|
BUILTIN_STL_SUPPORT = NO |
|
# If you use Microsoft's C++/CLI language, you should set this option to YES to |
# enable parsing support. |
# The default value is: NO. |
|
CPP_CLI_SUPPORT = NO |
|
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: |
# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen |
# will parse them like normal C++ but will assume all classes use public instead |
# of private inheritance when no explicit protection keyword is present. |
# The default value is: NO. |
|
SIP_SUPPORT = NO |
|
# For Microsoft's IDL there are propget and propput attributes to indicate |
# getter and setter methods for a property. Setting this option to YES will make |
# doxygen to replace the get and set methods by a property in the documentation. |
# This will only work if the methods are indeed getting or setting a simple |
# type. If this is not the case, or you want to show the methods anyway, you |
# should set this option to NO. |
# The default value is: YES. |
|
IDL_PROPERTY_SUPPORT = YES |
|
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
# tag is set to YES then doxygen will reuse the documentation of the first |
# member in the group (if any) for the other members of the group. By default |
# all members of a group must be documented explicitly. |
# The default value is: NO. |
|
DISTRIBUTE_GROUP_DOC = NO |
|
# If one adds a struct or class to a group and this option is enabled, then also |
# any nested class or struct is added to the same group. By default this option |
# is disabled and one has to add nested compounds explicitly via \ingroup. |
# The default value is: NO. |
|
GROUP_NESTED_COMPOUNDS = NO |
|
# Set the SUBGROUPING tag to YES to allow class member groups of the same type |
# (for instance a group of public functions) to be put as a subgroup of that |
# type (e.g. under the Public Functions section). Set it to NO to prevent |
# subgrouping. Alternatively, this can be done per class using the |
# \nosubgrouping command. |
# The default value is: YES. |
|
SUBGROUPING = YES |
|
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions |
# are shown inside the group in which they are included (e.g. using \ingroup) |
# instead of on a separate page (for HTML and Man pages) or section (for LaTeX |
# and RTF). |
# |
# Note that this feature does not work in combination with |
# SEPARATE_MEMBER_PAGES. |
# The default value is: NO. |
|
INLINE_GROUPED_CLASSES = NO |
|
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions |
# with only public data fields or simple typedef fields will be shown inline in |
# the documentation of the scope in which they are defined (i.e. file, |
# namespace, or group documentation), provided this scope is documented. If set |
# to NO, structs, classes, and unions are shown on a separate page (for HTML and |
# Man pages) or section (for LaTeX and RTF). |
# The default value is: NO. |
|
INLINE_SIMPLE_STRUCTS = NO |
|
# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or |
# enum is documented as struct, union, or enum with the name of the typedef. So |
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct |
# with name TypeT. When disabled the typedef will appear as a member of a file, |
# namespace, or class. And the struct will be named TypeS. This can typically be |
# useful for C code in case the coding convention dictates that all compound |
# types are typedef'ed and only the typedef is referenced, never the tag name. |
# The default value is: NO. |
|
TYPEDEF_HIDES_STRUCT = NO |
|
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This |
# cache is used to resolve symbols given their name and scope. Since this can be |
# an expensive process and often the same symbol appears multiple times in the |
# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small |
# doxygen will become slower. If the cache is too large, memory is wasted. The |
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range |
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 |
# symbols. At the end of a run doxygen will report the cache usage and suggest |
# the optimal cache size from a speed point of view. |
# Minimum value: 0, maximum value: 9, default value: 0. |
|
LOOKUP_CACHE_SIZE = 0 |
|
# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use |
# during processing. When set to 0 doxygen will based this on the number of |
# cores available in the system. You can set it explicitly to a value larger |
# than 0 to get more control over the balance between CPU load and processing |
# speed. At this moment only the input processing can be done using multiple |
# threads. Since this is still an experimental feature the default is set to 1, |
# which efficively disables parallel processing. Please report any issues you |
# encounter. Generating dot graphs in parallel is controlled by the |
# DOT_NUM_THREADS setting. |
# Minimum value: 0, maximum value: 32, default value: 1. |
|
NUM_PROC_THREADS = 1 |
|
#--------------------------------------------------------------------------- |
# Build related configuration options |
#--------------------------------------------------------------------------- |
|
# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in |
# documentation are documented, even if no documentation was available. Private |
# class members and static file members will be hidden unless the |
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. |
# Note: This will also disable the warnings about undocumented members that are |
# normally produced when WARNINGS is set to YES. |
# The default value is: NO. |
|
EXTRACT_ALL = YES |
|
# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will |
# be included in the documentation. |
# The default value is: NO. |
|
EXTRACT_PRIVATE = NO |
|
# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual |
# methods of a class will be included in the documentation. |
# The default value is: NO. |
|
EXTRACT_PRIV_VIRTUAL = NO |
|
# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal |
# scope will be included in the documentation. |
# The default value is: NO. |
|
EXTRACT_PACKAGE = NO |
|
# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be |
# included in the documentation. |
# The default value is: NO. |
|
EXTRACT_STATIC = NO |
|
# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined |
# locally in source files will be included in the documentation. If set to NO, |
# only classes defined in header files are included. Does not have any effect |
# for Java sources. |
# The default value is: YES. |
|
EXTRACT_LOCAL_CLASSES = YES |
|
# This flag is only useful for Objective-C code. If set to YES, local methods, |
# which are defined in the implementation section but not in the interface are |
# included in the documentation. If set to NO, only methods in the interface are |
# included. |
# The default value is: NO. |
|
EXTRACT_LOCAL_METHODS = NO |
|
# If this flag is set to YES, the members of anonymous namespaces will be |
# extracted and appear in the documentation as a namespace called |
# 'anonymous_namespace{file}', where file will be replaced with the base name of |
# the file that contains the anonymous namespace. By default anonymous namespace |
# are hidden. |
# The default value is: NO. |
|
EXTRACT_ANON_NSPACES = NO |
|
# If this flag is set to YES, the name of an unnamed parameter in a declaration |
# will be determined by the corresponding definition. By default unnamed |
# parameters remain unnamed in the output. |
# The default value is: YES. |
|
RESOLVE_UNNAMED_PARAMS = YES |
|
# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all |
# undocumented members inside documented classes or files. If set to NO these |
# members will be included in the various overviews, but no documentation |
# section is generated. This option has no effect if EXTRACT_ALL is enabled. |
# The default value is: NO. |
|
HIDE_UNDOC_MEMBERS = NO |
|
# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all |
# undocumented classes that are normally visible in the class hierarchy. If set |
# to NO, these classes will be included in the various overviews. This option |
# has no effect if EXTRACT_ALL is enabled. |
# The default value is: NO. |
|
HIDE_UNDOC_CLASSES = NO |
|
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend |
# declarations. If set to NO, these declarations will be included in the |
# documentation. |
# The default value is: NO. |
|
HIDE_FRIEND_COMPOUNDS = NO |
|
# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any |
# documentation blocks found inside the body of a function. If set to NO, these |
# blocks will be appended to the function's detailed documentation block. |
# The default value is: NO. |
|
HIDE_IN_BODY_DOCS = NO |
|
# The INTERNAL_DOCS tag determines if documentation that is typed after a |
# \internal command is included. If the tag is set to NO then the documentation |
# will be excluded. Set it to YES to include the internal documentation. |
# The default value is: NO. |
|
INTERNAL_DOCS = NO |
|
# With the correct setting of option CASE_SENSE_NAMES doxygen will better be |
# able to match the capabilities of the underlying filesystem. In case the |
# filesystem is case sensitive (i.e. it supports files in the same directory |
# whose names only differ in casing), the option must be set to YES to properly |
# deal with such files in case they appear in the input. For filesystems that |
# are not case sensitive the option should be be set to NO to properly deal with |
# output files written for symbols that only differ in casing, such as for two |
# classes, one named CLASS and the other named Class, and to also support |
# references to files without having to specify the exact matching casing. On |
# Windows (including Cygwin) and MacOS, users should typically set this option |
# to NO, whereas on Linux or other Unix flavors it should typically be set to |
# YES. |
# The default value is: system dependent. |
|
CASE_SENSE_NAMES = NO |
|
# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with |
# their full class and namespace scopes in the documentation. If set to YES, the |
# scope will be hidden. |
# The default value is: NO. |
|
HIDE_SCOPE_NAMES = NO |
|
# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will |
# append additional text to a page's title, such as Class Reference. If set to |
# YES the compound reference will be hidden. |
# The default value is: NO. |
|
HIDE_COMPOUND_REFERENCE= NO |
|
# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of |
# the files that are included by a file in the documentation of that file. |
# The default value is: YES. |
|
SHOW_INCLUDE_FILES = YES |
|
# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each |
# grouped member an include statement to the documentation, telling the reader |
# which file to include in order to use the member. |
# The default value is: NO. |
|
SHOW_GROUPED_MEMB_INC = NO |
|
# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include |
# files with double quotes in the documentation rather than with sharp brackets. |
# The default value is: NO. |
|
FORCE_LOCAL_INCLUDES = NO |
|
# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the |
# documentation for inline members. |
# The default value is: YES. |
|
INLINE_INFO = YES |
|
# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the |
# (detailed) documentation of file and class members alphabetically by member |
# name. If set to NO, the members will appear in declaration order. |
# The default value is: YES. |
|
SORT_MEMBER_DOCS = YES |
|
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief |
# descriptions of file, namespace and class members alphabetically by member |
# name. If set to NO, the members will appear in declaration order. Note that |
# this will also influence the order of the classes in the class list. |
# The default value is: NO. |
|
SORT_BRIEF_DOCS = NO |
|
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the |
# (brief and detailed) documentation of class members so that constructors and |
# destructors are listed first. If set to NO the constructors will appear in the |
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. |
# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief |
# member documentation. |
# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting |
# detailed member documentation. |
# The default value is: NO. |
|
SORT_MEMBERS_CTORS_1ST = NO |
|
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy |
# of group names into alphabetical order. If set to NO the group names will |
# appear in their defined order. |
# The default value is: NO. |
|
SORT_GROUP_NAMES = NO |
|
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by |
# fully-qualified names, including namespaces. If set to NO, the class list will |
# be sorted only by class name, not including the namespace part. |
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
# Note: This option applies only to the class list, not to the alphabetical |
# list. |
# The default value is: NO. |
|
SORT_BY_SCOPE_NAME = NO |
|
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper |
# type resolution of all parameters of a function it will reject a match between |
# the prototype and the implementation of a member function even if there is |
# only one candidate or it is obvious which candidate to choose by doing a |
# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still |
# accept a match between prototype and implementation in such cases. |
# The default value is: NO. |
|
STRICT_PROTO_MATCHING = NO |
|
# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo |
# list. This list is created by putting \todo commands in the documentation. |
# The default value is: YES. |
|
GENERATE_TODOLIST = YES |
|
# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test |
# list. This list is created by putting \test commands in the documentation. |
# The default value is: YES. |
|
GENERATE_TESTLIST = YES |
|
# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug |
# list. This list is created by putting \bug commands in the documentation. |
# The default value is: YES. |
|
GENERATE_BUGLIST = YES |
|
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) |
# the deprecated list. This list is created by putting \deprecated commands in |
# the documentation. |
# The default value is: YES. |
|
GENERATE_DEPRECATEDLIST= YES |
|
# The ENABLED_SECTIONS tag can be used to enable conditional documentation |
# sections, marked by \if <section_label> ... \endif and \cond <section_label> |
# ... \endcond blocks. |
|
ENABLED_SECTIONS = |
|
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the |
# initial value of a variable or macro / define can have for it to appear in the |
# documentation. If the initializer consists of more lines than specified here |
# it will be hidden. Use a value of 0 to hide initializers completely. The |
# appearance of the value of individual variables and macros / defines can be |
# controlled using \showinitializer or \hideinitializer command in the |
# documentation regardless of this setting. |
# Minimum value: 0, maximum value: 10000, default value: 30. |
|
MAX_INITIALIZER_LINES = 30 |
|
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at |
# the bottom of the documentation of classes and structs. If set to YES, the |
# list will mention the files that were used to generate the documentation. |
# The default value is: YES. |
|
SHOW_USED_FILES = YES |
|
# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This |
# will remove the Files entry from the Quick Index and from the Folder Tree View |
# (if specified). |
# The default value is: YES. |
|
SHOW_FILES = YES |
|
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces |
# page. This will remove the Namespaces entry from the Quick Index and from the |
# Folder Tree View (if specified). |
# The default value is: YES. |
|
SHOW_NAMESPACES = YES |
|
# The FILE_VERSION_FILTER tag can be used to specify a program or script that |
# doxygen should invoke to get the current version for each file (typically from |
# the version control system). Doxygen will invoke the program by executing (via |
# popen()) the command command input-file, where command is the value of the |
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided |
# by doxygen. Whatever the program writes to standard output is used as the file |
# version. For an example see the documentation. |
|
FILE_VERSION_FILTER = |
|
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed |
# by doxygen. The layout file controls the global structure of the generated |
# output files in an output format independent way. To create the layout file |
# that represents doxygen's defaults, run doxygen with the -l option. You can |
# optionally specify a file name after the option, if omitted DoxygenLayout.xml |
# will be used as the name of the layout file. |
# |
# Note that if you run doxygen from a directory containing a file called |
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE |
# tag is left empty. |
|
LAYOUT_FILE = |
|
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing |
# the reference definitions. This must be a list of .bib files. The .bib |
# extension is automatically appended if omitted. This requires the bibtex tool |
# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. |
# For LaTeX the style of the bibliography can be controlled using |
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the |
# search path. See also \cite for info how to create references. |
|
CITE_BIB_FILES = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to warning and progress messages |
#--------------------------------------------------------------------------- |
|
# The QUIET tag can be used to turn on/off the messages that are generated to |
# standard output by doxygen. If QUIET is set to YES this implies that the |
# messages are off. |
# The default value is: NO. |
|
QUIET = NO |
|
# The WARNINGS tag can be used to turn on/off the warning messages that are |
# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES |
# this implies that the warnings are on. |
# |
# Tip: Turn warnings on while writing the documentation. |
# The default value is: YES. |
|
WARNINGS = YES |
|
# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate |
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag |
# will automatically be disabled. |
# The default value is: YES. |
|
WARN_IF_UNDOCUMENTED = YES |
|
# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for |
# potential errors in the documentation, such as not documenting some parameters |
# in a documented function, or documenting parameters that don't exist or using |
# markup commands wrongly. |
# The default value is: YES. |
|
WARN_IF_DOC_ERROR = YES |
|
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that |
# are documented, but have no documentation for their parameters or return |
# value. If set to NO, doxygen will only warn about wrong or incomplete |
# parameter documentation, but not about the absence of documentation. If |
# EXTRACT_ALL is set to YES then this flag will automatically be disabled. |
# The default value is: NO. |
|
WARN_NO_PARAMDOC = NO |
|
# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when |
# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS |
# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but |
# at the end of the doxygen process doxygen will return with a non-zero status. |
# Possible values are: NO, YES and FAIL_ON_WARNINGS. |
# The default value is: NO. |
|
WARN_AS_ERROR = NO |
|
# The WARN_FORMAT tag determines the format of the warning messages that doxygen |
# can produce. The string should contain the $file, $line, and $text tags, which |
# will be replaced by the file and line number from which the warning originated |
# and the warning text. Optionally the format may contain $version, which will |
# be replaced by the version of the file (if it could be obtained via |
# FILE_VERSION_FILTER) |
# The default value is: $file:$line: $text. |
|
WARN_FORMAT = "$file:$line: $text" |
|
# The WARN_LOGFILE tag can be used to specify a file to which warning and error |
# messages should be written. If left blank the output is written to standard |
# error (stderr). |
|
WARN_LOGFILE = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the input files |
#--------------------------------------------------------------------------- |
|
# The INPUT tag is used to specify the files and/or directories that contain |
# documented source files. You may enter file names like myfile.cpp or |
# directories like /usr/src/myproject. Separate the files or directories with |
# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING |
# Note: If this tag is empty the current directory is searched. |
|
INPUT = |
|
# This tag can be used to specify the character encoding of the source files |
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses |
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv |
# documentation (see: |
# https://www.gnu.org/software/libiconv/) for the list of possible encodings. |
# The default value is: UTF-8. |
|
INPUT_ENCODING = UTF-8 |
|
# If the value of the INPUT tag contains directories, you can use the |
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and |
# *.h) to filter out the source-files in the directories. |
# |
# Note that for custom extensions or not directly supported extensions you also |
# need to set EXTENSION_MAPPING for the extension otherwise the files are not |
# read by doxygen. |
# |
# Note the list of default checked file patterns might differ from the list of |
# default file extension mappings. |
# |
# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, |
# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, |
# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, |
# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment), |
# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl, |
# *.ucf, *.qsf and *.ice. |
|
FILE_PATTERNS = *.inc *.asm |
|
# The RECURSIVE tag can be used to specify whether or not subdirectories should |
# be searched for input files as well. |
# The default value is: NO. |
|
RECURSIVE = NO |
|
# The EXCLUDE tag can be used to specify files and/or directories that should be |
# excluded from the INPUT source files. This way you can easily exclude a |
# subdirectory from a directory tree whose root is specified with the INPUT tag. |
# |
# Note that relative paths are relative to the directory from which doxygen is |
# run. |
|
EXCLUDE = |
|
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or |
# directories that are symbolic links (a Unix file system feature) are excluded |
# from the input. |
# The default value is: NO. |
|
EXCLUDE_SYMLINKS = NO |
|
# If the value of the INPUT tag contains directories, you can use the |
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
# certain files from those directories. |
# |
# Note that the wildcards are matched against the file with absolute path, so to |
# exclude all test directories for example use the pattern */test/* |
|
EXCLUDE_PATTERNS = |
|
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
# (namespaces, classes, functions, etc.) that should be excluded from the |
# output. The symbol name can be a fully qualified name, a word, or if the |
# wildcard * is used, a substring. Examples: ANamespace, AClass, |
# AClass::ANamespace, ANamespace::*Test |
# |
# Note that the wildcards are matched against the file with absolute path, so to |
# exclude all test directories use the pattern */test/* |
|
EXCLUDE_SYMBOLS = |
|
# The EXAMPLE_PATH tag can be used to specify one or more files or directories |
# that contain example code fragments that are included (see the \include |
# command). |
|
EXAMPLE_PATH = |
|
# If the value of the EXAMPLE_PATH tag contains directories, you can use the |
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and |
# *.h) to filter out the source-files in the directories. If left blank all |
# files are included. |
|
EXAMPLE_PATTERNS = * |
|
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
# searched for input files to be used with the \include or \dontinclude commands |
# irrespective of the value of the RECURSIVE tag. |
# The default value is: NO. |
|
EXAMPLE_RECURSIVE = NO |
|
# The IMAGE_PATH tag can be used to specify one or more files or directories |
# that contain images that are to be included in the documentation (see the |
# \image command). |
|
IMAGE_PATH = |
|
# The INPUT_FILTER tag can be used to specify a program that doxygen should |
# invoke to filter for each input file. Doxygen will invoke the filter program |
# by executing (via popen()) the command: |
# |
# <filter> <input-file> |
# |
# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the |
# name of an input file. Doxygen will then use the output that the filter |
# program writes to standard output. If FILTER_PATTERNS is specified, this tag |
# will be ignored. |
# |
# Note that the filter must not add or remove lines; it is applied before the |
# code is scanned, but not when the output code is generated. If lines are added |
# or removed, the anchors will not be placed correctly. |
# |
# Note that for custom extensions or not directly supported extensions you also |
# need to set EXTENSION_MAPPING for the extension otherwise the files are not |
# properly processed by doxygen. |
|
INPUT_FILTER = |
|
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
# basis. Doxygen will compare the file name with each pattern and apply the |
# filter if there is a match. The filters are a list of the form: pattern=filter |
# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how |
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the |
# patterns match the file name, INPUT_FILTER is applied. |
# |
# Note that for custom extensions or not directly supported extensions you also |
# need to set EXTENSION_MAPPING for the extension otherwise the files are not |
# properly processed by doxygen. |
|
FILTER_PATTERNS = |
|
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
# INPUT_FILTER) will also be used to filter the input files that are used for |
# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). |
# The default value is: NO. |
|
FILTER_SOURCE_FILES = NO |
|
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file |
# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and |
# it is also possible to disable source filtering for a specific pattern using |
# *.ext= (so without naming a filter). |
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. |
|
FILTER_SOURCE_PATTERNS = |
|
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that |
# is part of the input, its contents will be placed on the main page |
# (index.html). This can be useful if you have a project on for instance GitHub |
# and want to reuse the introduction page also for the doxygen output. |
|
USE_MDFILE_AS_MAINPAGE = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to source browsing |
#--------------------------------------------------------------------------- |
|
# If the SOURCE_BROWSER tag is set to YES then a list of source files will be |
# generated. Documented entities will be cross-referenced with these sources. |
# |
# Note: To get rid of all source code in the generated output, make sure that |
# also VERBATIM_HEADERS is set to NO. |
# The default value is: NO. |
|
SOURCE_BROWSER = NO |
|
# Setting the INLINE_SOURCES tag to YES will include the body of functions, |
# classes and enums directly into the documentation. |
# The default value is: NO. |
|
INLINE_SOURCES = NO |
|
# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any |
# special comment blocks from generated source code fragments. Normal C, C++ and |
# Fortran comments will always remain visible. |
# The default value is: YES. |
|
STRIP_CODE_COMMENTS = YES |
|
# If the REFERENCED_BY_RELATION tag is set to YES then for each documented |
# entity all documented functions referencing it will be listed. |
# The default value is: NO. |
|
REFERENCED_BY_RELATION = NO |
|
# If the REFERENCES_RELATION tag is set to YES then for each documented function |
# all documented entities called/used by that function will be listed. |
# The default value is: NO. |
|
REFERENCES_RELATION = NO |
|
# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set |
# to YES then the hyperlinks from functions in REFERENCES_RELATION and |
# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will |
# link to the documentation. |
# The default value is: YES. |
|
REFERENCES_LINK_SOURCE = YES |
|
# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the |
# source code will show a tooltip with additional information such as prototype, |
# brief description and links to the definition and documentation. Since this |
# will make the HTML file larger and loading of large files a bit slower, you |
# can opt to disable this feature. |
# The default value is: YES. |
# This tag requires that the tag SOURCE_BROWSER is set to YES. |
|
SOURCE_TOOLTIPS = YES |
|
# If the USE_HTAGS tag is set to YES then the references to source code will |
# point to the HTML generated by the htags(1) tool instead of doxygen built-in |
# source browser. The htags tool is part of GNU's global source tagging system |
# (see https://www.gnu.org/software/global/global.html). You will need version |
# 4.8.6 or higher. |
# |
# To use it do the following: |
# - Install the latest version of global |
# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file |
# - Make sure the INPUT points to the root of the source tree |
# - Run doxygen as normal |
# |
# Doxygen will invoke htags (and that will in turn invoke gtags), so these |
# tools must be available from the command line (i.e. in the search path). |
# |
# The result: instead of the source browser generated by doxygen, the links to |
# source code will now point to the output of htags. |
# The default value is: NO. |
# This tag requires that the tag SOURCE_BROWSER is set to YES. |
|
USE_HTAGS = NO |
|
# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a |
# verbatim copy of the header file for each class for which an include is |
# specified. Set to NO to disable this. |
# See also: Section \class. |
# The default value is: YES. |
|
VERBATIM_HEADERS = YES |
|
# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the |
# clang parser (see: |
# http://clang.llvm.org/) for more accurate parsing at the cost of reduced |
# performance. This can be particularly helpful with template rich C++ code for |
# which doxygen's built-in parser lacks the necessary type information. |
# Note: The availability of this option depends on whether or not doxygen was |
# generated with the -Duse_libclang=ON option for CMake. |
# The default value is: NO. |
|
CLANG_ASSISTED_PARSING = NO |
|
# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to |
# YES then doxygen will add the directory of each input to the include path. |
# The default value is: YES. |
|
CLANG_ADD_INC_PATHS = YES |
|
# If clang assisted parsing is enabled you can provide the compiler with command |
# line options that you would normally use when invoking the compiler. Note that |
# the include paths will already be set by doxygen for the files and directories |
# specified with INPUT and INCLUDE_PATH. |
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. |
|
CLANG_OPTIONS = |
|
# If clang assisted parsing is enabled you can provide the clang parser with the |
# path to the directory containing a file called compile_commands.json. This |
# file is the compilation database (see: |
# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the |
# options used when the source files were built. This is equivalent to |
# specifying the -p option to a clang tool, such as clang-check. These options |
# will then be passed to the parser. Any options specified with CLANG_OPTIONS |
# will be added as well. |
# Note: The availability of this option depends on whether or not doxygen was |
# generated with the -Duse_libclang=ON option for CMake. |
|
CLANG_DATABASE_PATH = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the alphabetical class index |
#--------------------------------------------------------------------------- |
|
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all |
# compounds will be generated. Enable this if the project contains a lot of |
# classes, structs, unions or interfaces. |
# The default value is: YES. |
|
ALPHABETICAL_INDEX = YES |
|
# In case all classes in a project start with a common prefix, all classes will |
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag |
# can be used to specify a prefix (or a list of prefixes) that should be ignored |
# while generating the index headers. |
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. |
|
IGNORE_PREFIX = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the HTML output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output |
# The default value is: YES. |
|
GENERATE_HTML = YES |
|
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a |
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
# it. |
# The default directory is: html. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_OUTPUT = html |
|
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each |
# generated HTML page (for example: .htm, .php, .asp). |
# The default value is: .html. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_FILE_EXTENSION = .html |
|
# The HTML_HEADER tag can be used to specify a user-defined HTML header file for |
# each generated HTML page. If the tag is left blank doxygen will generate a |
# standard header. |
# |
# To get valid HTML the header file that includes any scripts and style sheets |
# that doxygen needs, which is dependent on the configuration options used (e.g. |
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a |
# default header using |
# doxygen -w html new_header.html new_footer.html new_stylesheet.css |
# YourConfigFile |
# and then modify the file new_header.html. See also section "Doxygen usage" |
# for information on how to generate the default header that doxygen normally |
# uses. |
# Note: The header is subject to change so you typically have to regenerate the |
# default header when upgrading to a newer version of doxygen. For a description |
# of the possible markers and block names see the documentation. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_HEADER = |
|
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each |
# generated HTML page. If the tag is left blank doxygen will generate a standard |
# footer. See HTML_HEADER for more information on how to generate a default |
# footer and what special commands can be used inside the footer. See also |
# section "Doxygen usage" for information on how to generate the default footer |
# that doxygen normally uses. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_FOOTER = |
|
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style |
# sheet that is used by each HTML page. It can be used to fine-tune the look of |
# the HTML output. If left blank doxygen will generate a default style sheet. |
# See also section "Doxygen usage" for information on how to generate the style |
# sheet that doxygen normally uses. |
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as |
# it is more robust and this tag (HTML_STYLESHEET) will in the future become |
# obsolete. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_STYLESHEET = |
|
# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined |
# cascading style sheets that are included after the standard style sheets |
# created by doxygen. Using this option one can overrule certain style aspects. |
# This is preferred over using HTML_STYLESHEET since it does not replace the |
# standard style sheet and is therefore more robust against future updates. |
# Doxygen will copy the style sheet files to the output directory. |
# Note: The order of the extra style sheet files is of importance (e.g. the last |
# style sheet in the list overrules the setting of the previous ones in the |
# list). For an example see the documentation. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_EXTRA_STYLESHEET = |
|
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or |
# other source files which should be copied to the HTML output directory. Note |
# that these files will be copied to the base HTML output directory. Use the |
# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these |
# files. In the HTML_STYLESHEET file, use the file name only. Also note that the |
# files will be copied as-is; there are no commands or markers available. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_EXTRA_FILES = |
|
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen |
# will adjust the colors in the style sheet and background images according to |
# this color. Hue is specified as an angle on a colorwheel, see |
# https://en.wikipedia.org/wiki/Hue for more information. For instance the value |
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 |
# purple, and 360 is red again. |
# Minimum value: 0, maximum value: 359, default value: 220. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_COLORSTYLE_HUE = 220 |
|
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors |
# in the HTML output. For a value of 0 the output will use grayscales only. A |
# value of 255 will produce the most vivid colors. |
# Minimum value: 0, maximum value: 255, default value: 100. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_COLORSTYLE_SAT = 100 |
|
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the |
# luminance component of the colors in the HTML output. Values below 100 |
# gradually make the output lighter, whereas values above 100 make the output |
# darker. The value divided by 100 is the actual gamma applied, so 80 represents |
# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not |
# change the gamma. |
# Minimum value: 40, maximum value: 240, default value: 80. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_COLORSTYLE_GAMMA = 80 |
|
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML |
# page will contain the date and time when the page was generated. Setting this |
# to YES can help to show when doxygen was last run and thus if the |
# documentation is up to date. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_TIMESTAMP = NO |
|
# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML |
# documentation will contain a main index with vertical navigation menus that |
# are dynamically created via JavaScript. If disabled, the navigation index will |
# consists of multiple levels of tabs that are statically embedded in every HTML |
# page. Disable this option to support browsers that do not have JavaScript, |
# like the Qt help browser. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_DYNAMIC_MENUS = YES |
|
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
# documentation will contain sections that can be hidden and shown after the |
# page has loaded. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_DYNAMIC_SECTIONS = NO |
|
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries |
# shown in the various tree structured indices initially; the user can expand |
# and collapse entries dynamically later on. Doxygen will expand the tree to |
# such a level that at most the specified number of entries are visible (unless |
# a fully collapsed tree already exceeds this amount). So setting the number of |
# entries 1 will produce a full collapsed tree by default. 0 is a special value |
# representing an infinite number of entries and will result in a full expanded |
# tree by default. |
# Minimum value: 0, maximum value: 9999, default value: 100. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_INDEX_NUM_ENTRIES = 100 |
|
# If the GENERATE_DOCSET tag is set to YES, additional index files will be |
# generated that can be used as input for Apple's Xcode 3 integrated development |
# environment (see: |
# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To |
# create a documentation set, doxygen will generate a Makefile in the HTML |
# output directory. Running make will produce the docset in that directory and |
# running make install will install the docset in |
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at |
# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy |
# genXcode/_index.html for more information. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
GENERATE_DOCSET = NO |
|
# This tag determines the name of the docset feed. A documentation feed provides |
# an umbrella under which multiple documentation sets from a single provider |
# (such as a company or product suite) can be grouped. |
# The default value is: Doxygen generated docs. |
# This tag requires that the tag GENERATE_DOCSET is set to YES. |
|
DOCSET_FEEDNAME = "Doxygen generated docs" |
|
# This tag specifies a string that should uniquely identify the documentation |
# set bundle. This should be a reverse domain-name style string, e.g. |
# com.mycompany.MyDocSet. Doxygen will append .docset to the name. |
# The default value is: org.doxygen.Project. |
# This tag requires that the tag GENERATE_DOCSET is set to YES. |
|
DOCSET_BUNDLE_ID = org.doxygen.Project |
|
# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify |
# the documentation publisher. This should be a reverse domain-name style |
# string, e.g. com.mycompany.MyDocSet.documentation. |
# The default value is: org.doxygen.Publisher. |
# This tag requires that the tag GENERATE_DOCSET is set to YES. |
|
DOCSET_PUBLISHER_ID = org.doxygen.Publisher |
|
# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. |
# The default value is: Publisher. |
# This tag requires that the tag GENERATE_DOCSET is set to YES. |
|
DOCSET_PUBLISHER_NAME = Publisher |
|
# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three |
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The |
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop |
# (see: |
# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows. |
# |
# The HTML Help Workshop contains a compiler that can convert all HTML output |
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML |
# files are now used as the Windows 98 help format, and will replace the old |
# Windows help format (.hlp) on all Windows platforms in the future. Compressed |
# HTML files also contain an index, a table of contents, and you can search for |
# words in the documentation. The HTML workshop also contains a viewer for |
# compressed HTML files. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
GENERATE_HTMLHELP = NO |
|
# The CHM_FILE tag can be used to specify the file name of the resulting .chm |
# file. You can add a path in front of the file if the result should not be |
# written to the html output directory. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
CHM_FILE = |
|
# The HHC_LOCATION tag can be used to specify the location (absolute path |
# including file name) of the HTML help compiler (hhc.exe). If non-empty, |
# doxygen will try to run the HTML help compiler on the generated index.hhp. |
# The file has to be specified with full path. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
HHC_LOCATION = |
|
# The GENERATE_CHI flag controls if a separate .chi index file is generated |
# (YES) or that it should be included in the main .chm file (NO). |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
GENERATE_CHI = NO |
|
# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) |
# and project file content. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
CHM_INDEX_ENCODING = |
|
# The BINARY_TOC flag controls whether a binary table of contents is generated |
# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it |
# enables the Previous and Next buttons. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
BINARY_TOC = NO |
|
# The TOC_EXPAND flag can be set to YES to add extra items for group members to |
# the table of contents of the HTML help documentation and to the tree view. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTMLHELP is set to YES. |
|
TOC_EXPAND = NO |
|
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and |
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that |
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help |
# (.qch) of the generated HTML documentation. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
GENERATE_QHP = NO |
|
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify |
# the file name of the resulting .qch file. The path specified is relative to |
# the HTML output folder. |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QCH_FILE = |
|
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help |
# Project output. For more information please see Qt Help Project / Namespace |
# (see: |
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). |
# The default value is: org.doxygen.Project. |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHP_NAMESPACE = org.doxygen.Project |
|
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt |
# Help Project output. For more information please see Qt Help Project / Virtual |
# Folders (see: |
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). |
# The default value is: doc. |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHP_VIRTUAL_FOLDER = doc |
|
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom |
# filter to add. For more information please see Qt Help Project / Custom |
# Filters (see: |
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHP_CUST_FILTER_NAME = |
|
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the |
# custom filter to add. For more information please see Qt Help Project / Custom |
# Filters (see: |
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHP_CUST_FILTER_ATTRS = |
|
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this |
# project's filter section matches. Qt Help Project / Filter Attributes (see: |
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHP_SECT_FILTER_ATTRS = |
|
# The QHG_LOCATION tag can be used to specify the location (absolute path |
# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to |
# run qhelpgenerator on the generated .qhp file. |
# This tag requires that the tag GENERATE_QHP is set to YES. |
|
QHG_LOCATION = |
|
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be |
# generated, together with the HTML files, they form an Eclipse help plugin. To |
# install this plugin and make it available under the help contents menu in |
# Eclipse, the contents of the directory containing the HTML and XML files needs |
# to be copied into the plugins directory of eclipse. The name of the directory |
# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. |
# After copying Eclipse needs to be restarted before the help appears. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
GENERATE_ECLIPSEHELP = NO |
|
# A unique identifier for the Eclipse help plugin. When installing the plugin |
# the directory name containing the HTML and XML files should also have this |
# name. Each documentation set should have its own identifier. |
# The default value is: org.doxygen.Project. |
# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. |
|
ECLIPSE_DOC_ID = org.doxygen.Project |
|
# If you want full control over the layout of the generated HTML pages it might |
# be necessary to disable the index and replace it with your own. The |
# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top |
# of each HTML page. A value of NO enables the index and the value YES disables |
# it. Since the tabs in the index contain the same information as the navigation |
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
DISABLE_INDEX = NO |
|
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index |
# structure should be generated to display hierarchical information. If the tag |
# value is set to YES, a side panel will be generated containing a tree-like |
# index structure (just like the one that is generated for HTML Help). For this |
# to work a browser that supports JavaScript, DHTML, CSS and frames is required |
# (i.e. any modern browser). Windows users are probably better off using the |
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can |
# further fine-tune the look of the index. As an example, the default style |
# sheet generated by doxygen has an example that shows how to put an image at |
# the root of the tree instead of the PROJECT_NAME. Since the tree basically has |
# the same information as the tab index, you could consider setting |
# DISABLE_INDEX to YES when enabling this option. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
GENERATE_TREEVIEW = NO |
|
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that |
# doxygen will group on one line in the generated HTML documentation. |
# |
# Note that a value of 0 will completely suppress the enum values from appearing |
# in the overview section. |
# Minimum value: 0, maximum value: 20, default value: 4. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
ENUM_VALUES_PER_LINE = 4 |
|
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used |
# to set the initial width (in pixels) of the frame in which the tree is shown. |
# Minimum value: 0, maximum value: 1500, default value: 250. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
TREEVIEW_WIDTH = 250 |
|
# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to |
# external symbols imported via tag files in a separate window. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
EXT_LINKS_IN_WINDOW = NO |
|
# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg |
# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see |
# https://inkscape.org) to generate formulas as SVG images instead of PNGs for |
# the HTML output. These images will generally look nicer at scaled resolutions. |
# Possible values are: png (the default) and svg (looks nicer but requires the |
# pdf2svg or inkscape tool). |
# The default value is: png. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
HTML_FORMULA_FORMAT = png |
|
# Use this tag to change the font size of LaTeX formulas included as images in |
# the HTML documentation. When you change the font size after a successful |
# doxygen run you need to manually remove any form_*.png images from the HTML |
# output directory to force them to be regenerated. |
# Minimum value: 8, maximum value: 50, default value: 10. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
FORMULA_FONTSIZE = 10 |
|
# Use the FORMULA_TRANSPARENT tag to determine whether or not the images |
# generated for formulas are transparent PNGs. Transparent PNGs are not |
# supported properly for IE 6.0, but are supported on all modern browsers. |
# |
# Note that when changing this option you need to delete any form_*.png files in |
# the HTML output directory before the changes have effect. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
FORMULA_TRANSPARENT = YES |
|
# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands |
# to create new LaTeX commands to be used in formulas as building blocks. See |
# the section "Including formulas" for details. |
|
FORMULA_MACROFILE = |
|
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see |
# https://www.mathjax.org) which uses client side JavaScript for the rendering |
# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX |
# installed or if you want to formulas look prettier in the HTML output. When |
# enabled you may also need to install MathJax separately and configure the path |
# to it using the MATHJAX_RELPATH option. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
USE_MATHJAX = NO |
|
# When MathJax is enabled you can set the default output format to be used for |
# the MathJax output. See the MathJax site (see: |
# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. |
# Possible values are: HTML-CSS (which is slower, but has the best |
# compatibility), NativeMML (i.e. MathML) and SVG. |
# The default value is: HTML-CSS. |
# This tag requires that the tag USE_MATHJAX is set to YES. |
|
MATHJAX_FORMAT = HTML-CSS |
|
# When MathJax is enabled you need to specify the location relative to the HTML |
# output directory using the MATHJAX_RELPATH option. The destination directory |
# should contain the MathJax.js script. For instance, if the mathjax directory |
# is located at the same level as the HTML output directory, then |
# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax |
# Content Delivery Network so you can quickly see the result without installing |
# MathJax. However, it is strongly recommended to install a local copy of |
# MathJax from https://www.mathjax.org before deployment. |
# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2. |
# This tag requires that the tag USE_MATHJAX is set to YES. |
|
MATHJAX_RELPATH = https://cdn.jsdelivr.net/npm/mathjax@2 |
|
# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax |
# extension names that should be enabled during MathJax rendering. For example |
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols |
# This tag requires that the tag USE_MATHJAX is set to YES. |
|
MATHJAX_EXTENSIONS = |
|
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces |
# of code that will be used on startup of the MathJax code. See the MathJax site |
# (see: |
# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an |
# example see the documentation. |
# This tag requires that the tag USE_MATHJAX is set to YES. |
|
MATHJAX_CODEFILE = |
|
# When the SEARCHENGINE tag is enabled doxygen will generate a search box for |
# the HTML output. The underlying search engine uses javascript and DHTML and |
# should work on any modern browser. Note that when using HTML help |
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) |
# there is already a search function so this one should typically be disabled. |
# For large projects the javascript based search engine can be slow, then |
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to |
# search using the keyboard; to jump to the search box use <access key> + S |
# (what the <access key> is depends on the OS and browser, but it is typically |
# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down |
# key> to jump into the search results window, the results can be navigated |
# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel |
# the search. The filter options can be selected when the cursor is inside the |
# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> |
# to select a filter and <Enter> or <escape> to activate or cancel the filter |
# option. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_HTML is set to YES. |
|
SEARCHENGINE = YES |
|
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be |
# implemented using a web server instead of a web client using JavaScript. There |
# are two flavors of web server based searching depending on the EXTERNAL_SEARCH |
# setting. When disabled, doxygen will generate a PHP script for searching and |
# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing |
# and searching needs to be provided by external tools. See the section |
# "External Indexing and Searching" for details. |
# The default value is: NO. |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
SERVER_BASED_SEARCH = NO |
|
# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP |
# script for searching. Instead the search results are written to an XML file |
# which needs to be processed by an external indexer. Doxygen will invoke an |
# external search engine pointed to by the SEARCHENGINE_URL option to obtain the |
# search results. |
# |
# Doxygen ships with an example indexer (doxyindexer) and search engine |
# (doxysearch.cgi) which are based on the open source search engine library |
# Xapian (see: |
# https://xapian.org/). |
# |
# See the section "External Indexing and Searching" for details. |
# The default value is: NO. |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
EXTERNAL_SEARCH = NO |
|
# The SEARCHENGINE_URL should point to a search engine hosted by a web server |
# which will return the search results when EXTERNAL_SEARCH is enabled. |
# |
# Doxygen ships with an example indexer (doxyindexer) and search engine |
# (doxysearch.cgi) which are based on the open source search engine library |
# Xapian (see: |
# https://xapian.org/). See the section "External Indexing and Searching" for |
# details. |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
SEARCHENGINE_URL = |
|
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed |
# search data is written to a file for indexing by an external tool. With the |
# SEARCHDATA_FILE tag the name of this file can be specified. |
# The default file is: searchdata.xml. |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
SEARCHDATA_FILE = searchdata.xml |
|
# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the |
# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is |
# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple |
# projects and redirect the results back to the right project. |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
EXTERNAL_SEARCH_ID = |
|
# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen |
# projects other than the one defined by this configuration file, but that are |
# all added to the same external search index. Each project needs to have a |
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of |
# to a relative location where the documentation can be found. The format is: |
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... |
# This tag requires that the tag SEARCHENGINE is set to YES. |
|
EXTRA_SEARCH_MAPPINGS = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the LaTeX output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. |
# The default value is: YES. |
|
GENERATE_LATEX = YES |
|
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a |
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
# it. |
# The default directory is: latex. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_OUTPUT = latex |
|
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
# invoked. |
# |
# Note that when not enabling USE_PDFLATEX the default is latex when enabling |
# USE_PDFLATEX the default is pdflatex and when in the later case latex is |
# chosen this is overwritten by pdflatex. For specific output languages the |
# default can have been set differently, this depends on the implementation of |
# the output language. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_CMD_NAME = |
|
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate |
# index for LaTeX. |
# Note: This tag is used in the Makefile / make.bat. |
# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file |
# (.tex). |
# The default file is: makeindex. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
MAKEINDEX_CMD_NAME = makeindex |
|
# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to |
# generate index for LaTeX. In case there is no backslash (\) as first character |
# it will be automatically added in the LaTeX code. |
# Note: This tag is used in the generated output file (.tex). |
# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. |
# The default value is: makeindex. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_MAKEINDEX_CMD = makeindex |
|
# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX |
# documents. This may be useful for small projects and may help to save some |
# trees in general. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
COMPACT_LATEX = NO |
|
# The PAPER_TYPE tag can be used to set the paper type that is used by the |
# printer. |
# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x |
# 14 inches) and executive (7.25 x 10.5 inches). |
# The default value is: a4. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
PAPER_TYPE = a4 |
|
# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names |
# that should be included in the LaTeX output. The package can be specified just |
# by its name or with the correct syntax as to be used with the LaTeX |
# \usepackage command. To get the times font for instance you can specify : |
# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} |
# To use the option intlimits with the amsmath package you can specify: |
# EXTRA_PACKAGES=[intlimits]{amsmath} |
# If left blank no extra packages will be included. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
EXTRA_PACKAGES = |
|
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the |
# generated LaTeX document. The header should contain everything until the first |
# chapter. If it is left blank doxygen will generate a standard header. See |
# section "Doxygen usage" for information on how to let doxygen write the |
# default header to a separate file. |
# |
# Note: Only use a user-defined header if you know what you are doing! The |
# following commands have a special meaning inside the header: $title, |
# $datetime, $date, $doxygenversion, $projectname, $projectnumber, |
# $projectbrief, $projectlogo. Doxygen will replace $title with the empty |
# string, for the replacement values of the other commands the user is referred |
# to HTML_HEADER. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_HEADER = |
|
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the |
# generated LaTeX document. The footer should contain everything after the last |
# chapter. If it is left blank doxygen will generate a standard footer. See |
# LATEX_HEADER for more information on how to generate a default footer and what |
# special commands can be used inside the footer. |
# |
# Note: Only use a user-defined footer if you know what you are doing! |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_FOOTER = |
|
# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined |
# LaTeX style sheets that are included after the standard style sheets created |
# by doxygen. Using this option one can overrule certain style aspects. Doxygen |
# will copy the style sheet files to the output directory. |
# Note: The order of the extra style sheet files is of importance (e.g. the last |
# style sheet in the list overrules the setting of the previous ones in the |
# list). |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_EXTRA_STYLESHEET = |
|
# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or |
# other source files which should be copied to the LATEX_OUTPUT output |
# directory. Note that the files will be copied as-is; there are no commands or |
# markers available. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_EXTRA_FILES = |
|
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is |
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will |
# contain links (just like the HTML output) instead of page references. This |
# makes the output suitable for online browsing using a PDF viewer. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
PDF_HYPERLINKS = YES |
|
# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as |
# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX |
# files. Set this option to YES, to get a higher quality PDF documentation. |
# |
# See also section LATEX_CMD_NAME for selecting the engine. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
USE_PDFLATEX = YES |
|
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode |
# command to the generated LaTeX files. This will instruct LaTeX to keep running |
# if errors occur, instead of asking the user for help. This option is also used |
# when generating formulas in HTML. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_BATCHMODE = NO |
|
# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the |
# index chapters (such as File Index, Compound Index, etc.) in the output. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_HIDE_INDICES = NO |
|
# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source |
# code with syntax highlighting in the LaTeX output. |
# |
# Note that which sources are shown also depends on other settings such as |
# SOURCE_BROWSER. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_SOURCE_CODE = NO |
|
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the |
# bibliography, e.g. plainnat, or ieeetr. See |
# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. |
# The default value is: plain. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_BIB_STYLE = plain |
|
# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated |
# page will contain the date and time when the page was generated. Setting this |
# to NO can help when comparing the output of multiple runs. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_TIMESTAMP = NO |
|
# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) |
# path from which the emoji images will be read. If a relative path is entered, |
# it will be relative to the LATEX_OUTPUT directory. If left blank the |
# LATEX_OUTPUT directory will be used. |
# This tag requires that the tag GENERATE_LATEX is set to YES. |
|
LATEX_EMOJI_DIRECTORY = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the RTF output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The |
# RTF output is optimized for Word 97 and may not look too pretty with other RTF |
# readers/editors. |
# The default value is: NO. |
|
GENERATE_RTF = NO |
|
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a |
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
# it. |
# The default directory is: rtf. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
RTF_OUTPUT = rtf |
|
# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF |
# documents. This may be useful for small projects and may help to save some |
# trees in general. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
COMPACT_RTF = NO |
|
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will |
# contain hyperlink fields. The RTF file will contain links (just like the HTML |
# output) instead of page references. This makes the output suitable for online |
# browsing using Word or some other Word compatible readers that support those |
# fields. |
# |
# Note: WordPad (write) and others do not support links. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
RTF_HYPERLINKS = NO |
|
# Load stylesheet definitions from file. Syntax is similar to doxygen's |
# configuration file, i.e. a series of assignments. You only have to provide |
# replacements, missing definitions are set to their default value. |
# |
# See also section "Doxygen usage" for information on how to generate the |
# default style sheet that doxygen normally uses. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
RTF_STYLESHEET_FILE = |
|
# Set optional variables used in the generation of an RTF document. Syntax is |
# similar to doxygen's configuration file. A template extensions file can be |
# generated using doxygen -e rtf extensionFile. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
RTF_EXTENSIONS_FILE = |
|
# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code |
# with syntax highlighting in the RTF output. |
# |
# Note that which sources are shown also depends on other settings such as |
# SOURCE_BROWSER. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_RTF is set to YES. |
|
RTF_SOURCE_CODE = NO |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the man page output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for |
# classes and files. |
# The default value is: NO. |
|
GENERATE_MAN = NO |
|
# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a |
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
# it. A directory man3 will be created inside the directory specified by |
# MAN_OUTPUT. |
# The default directory is: man. |
# This tag requires that the tag GENERATE_MAN is set to YES. |
|
MAN_OUTPUT = man |
|
# The MAN_EXTENSION tag determines the extension that is added to the generated |
# man pages. In case the manual section does not start with a number, the number |
# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is |
# optional. |
# The default value is: .3. |
# This tag requires that the tag GENERATE_MAN is set to YES. |
|
MAN_EXTENSION = .3 |
|
# The MAN_SUBDIR tag determines the name of the directory created within |
# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by |
# MAN_EXTENSION with the initial . removed. |
# This tag requires that the tag GENERATE_MAN is set to YES. |
|
MAN_SUBDIR = |
|
# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it |
# will generate one additional man file for each entity documented in the real |
# man page(s). These additional files only source the real man page, but without |
# them the man command would be unable to find the correct page. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_MAN is set to YES. |
|
MAN_LINKS = NO |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the XML output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that |
# captures the structure of the code including all documentation. |
# The default value is: NO. |
|
GENERATE_XML = NO |
|
# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a |
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of |
# it. |
# The default directory is: xml. |
# This tag requires that the tag GENERATE_XML is set to YES. |
|
XML_OUTPUT = xml |
|
# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program |
# listings (including syntax highlighting and cross-referencing information) to |
# the XML output. Note that enabling this will significantly increase the size |
# of the XML output. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_XML is set to YES. |
|
XML_PROGRAMLISTING = YES |
|
# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include |
# namespace members in file scope as well, matching the HTML output. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_XML is set to YES. |
|
XML_NS_MEMB_FILE_SCOPE = NO |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the DOCBOOK output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files |
# that can be used to generate PDF. |
# The default value is: NO. |
|
GENERATE_DOCBOOK = NO |
|
# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. |
# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in |
# front of it. |
# The default directory is: docbook. |
# This tag requires that the tag GENERATE_DOCBOOK is set to YES. |
|
DOCBOOK_OUTPUT = docbook |
|
# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the |
# program listings (including syntax highlighting and cross-referencing |
# information) to the DOCBOOK output. Note that enabling this will significantly |
# increase the size of the DOCBOOK output. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_DOCBOOK is set to YES. |
|
DOCBOOK_PROGRAMLISTING = NO |
|
#--------------------------------------------------------------------------- |
# Configuration options for the AutoGen Definitions output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an |
# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures |
# the structure of the code including all documentation. Note that this feature |
# is still experimental and incomplete at the moment. |
# The default value is: NO. |
|
GENERATE_AUTOGEN_DEF = NO |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the Perl module output |
#--------------------------------------------------------------------------- |
|
# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module |
# file that captures the structure of the code including all documentation. |
# |
# Note that this feature is still experimental and incomplete at the moment. |
# The default value is: NO. |
|
GENERATE_PERLMOD = NO |
|
# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary |
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI |
# output from the Perl module output. |
# The default value is: NO. |
# This tag requires that the tag GENERATE_PERLMOD is set to YES. |
|
PERLMOD_LATEX = NO |
|
# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely |
# formatted so it can be parsed by a human reader. This is useful if you want to |
# understand what is going on. On the other hand, if this tag is set to NO, the |
# size of the Perl module output will be much smaller and Perl will parse it |
# just the same. |
# The default value is: YES. |
# This tag requires that the tag GENERATE_PERLMOD is set to YES. |
|
PERLMOD_PRETTY = YES |
|
# The names of the make variables in the generated doxyrules.make file are |
# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful |
# so different doxyrules.make files included by the same Makefile don't |
# overwrite each other's variables. |
# This tag requires that the tag GENERATE_PERLMOD is set to YES. |
|
PERLMOD_MAKEVAR_PREFIX = |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the preprocessor |
#--------------------------------------------------------------------------- |
|
# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all |
# C-preprocessor directives found in the sources and include files. |
# The default value is: YES. |
|
ENABLE_PREPROCESSING = YES |
|
# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names |
# in the source code. If set to NO, only conditional compilation will be |
# performed. Macro expansion can be done in a controlled way by setting |
# EXPAND_ONLY_PREDEF to YES. |
# The default value is: NO. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
MACRO_EXPANSION = NO |
|
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then |
# the macro expansion is limited to the macros specified with the PREDEFINED and |
# EXPAND_AS_DEFINED tags. |
# The default value is: NO. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
EXPAND_ONLY_PREDEF = NO |
|
# If the SEARCH_INCLUDES tag is set to YES, the include files in the |
# INCLUDE_PATH will be searched if a #include is found. |
# The default value is: YES. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
SEARCH_INCLUDES = YES |
|
# The INCLUDE_PATH tag can be used to specify one or more directories that |
# contain include files that are not input files but should be processed by the |
# preprocessor. |
# This tag requires that the tag SEARCH_INCLUDES is set to YES. |
|
INCLUDE_PATH = |
|
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
# patterns (like *.h and *.hpp) to filter out the header-files in the |
# directories. If left blank, the patterns specified with FILE_PATTERNS will be |
# used. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
INCLUDE_FILE_PATTERNS = |
|
# The PREDEFINED tag can be used to specify one or more macro names that are |
# defined before the preprocessor is started (similar to the -D option of e.g. |
# gcc). The argument of the tag is a list of macros of the form: name or |
# name=definition (no spaces). If the definition and the "=" are omitted, "=1" |
# is assumed. To prevent a macro definition from being undefined via #undef or |
# recursively expanded use the := operator instead of the = operator. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
PREDEFINED = |
|
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this |
# tag can be used to specify a list of macro names that should be expanded. The |
# macro definition that is found in the sources will be used. Use the PREDEFINED |
# tag if you want to use a different macro definition that overrules the |
# definition found in the source code. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
EXPAND_AS_DEFINED = |
|
# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will |
# remove all references to function-like macros that are alone on a line, have |
# an all uppercase name, and do not end with a semicolon. Such function macros |
# are typically used for boiler-plate code, and will confuse the parser if not |
# removed. |
# The default value is: YES. |
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. |
|
SKIP_FUNCTION_MACROS = YES |
|
#--------------------------------------------------------------------------- |
# Configuration options related to external references |
#--------------------------------------------------------------------------- |
|
# The TAGFILES tag can be used to specify one or more tag files. For each tag |
# file the location of the external documentation should be added. The format of |
# a tag file without this location is as follows: |
# TAGFILES = file1 file2 ... |
# Adding location for the tag files is done as follows: |
# TAGFILES = file1=loc1 "file2 = loc2" ... |
# where loc1 and loc2 can be relative or absolute paths or URLs. See the |
# section "Linking to external documentation" for more information about the use |
# of tag files. |
# Note: Each tag file must have a unique name (where the name does NOT include |
# the path). If a tag file is not located in the directory in which doxygen is |
# run, you must also specify the path to the tagfile here. |
|
TAGFILES = |
|
# When a file name is specified after GENERATE_TAGFILE, doxygen will create a |
# tag file that is based on the input files it reads. See section "Linking to |
# external documentation" for more information about the usage of tag files. |
|
GENERATE_TAGFILE = |
|
# If the ALLEXTERNALS tag is set to YES, all external class will be listed in |
# the class index. If set to NO, only the inherited external classes will be |
# listed. |
# The default value is: NO. |
|
ALLEXTERNALS = NO |
|
# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed |
# in the modules index. If set to NO, only the current project's groups will be |
# listed. |
# The default value is: YES. |
|
EXTERNAL_GROUPS = YES |
|
# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in |
# the related pages index. If set to NO, only the current project's pages will |
# be listed. |
# The default value is: YES. |
|
EXTERNAL_PAGES = YES |
|
#--------------------------------------------------------------------------- |
# Configuration options related to the dot tool |
#--------------------------------------------------------------------------- |
|
# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram |
# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to |
# NO turns the diagrams off. Note that this option also works with HAVE_DOT |
# disabled, but it is recommended to install and use dot, since it yields more |
# powerful graphs. |
# The default value is: YES. |
|
CLASS_DIAGRAMS = YES |
|
# You can include diagrams made with dia in doxygen documentation. Doxygen will |
# then run dia to produce the diagram and insert it in the documentation. The |
# DIA_PATH tag allows you to specify the directory where the dia binary resides. |
# If left empty dia is assumed to be found in the default search path. |
|
DIA_PATH = |
|
# If set to YES the inheritance and collaboration graphs will hide inheritance |
# and usage relations if the target is undocumented or is not a class. |
# The default value is: YES. |
|
HIDE_UNDOC_RELATIONS = YES |
|
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
# available from the path. This tool is part of Graphviz (see: |
# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent |
# Bell Labs. The other options in this section have no effect if this option is |
# set to NO |
# The default value is: NO. |
|
HAVE_DOT = NO |
|
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed |
# to run in parallel. When set to 0 doxygen will base this on the number of |
# processors available in the system. You can set it explicitly to a value |
# larger than 0 to get control over the balance between CPU load and processing |
# speed. |
# Minimum value: 0, maximum value: 32, default value: 0. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_NUM_THREADS = 0 |
|
# When you want a differently looking font in the dot files that doxygen |
# generates you can specify the font name using DOT_FONTNAME. You need to make |
# sure dot is able to find the font, which can be done by putting it in a |
# standard location or by setting the DOTFONTPATH environment variable or by |
# setting DOT_FONTPATH to the directory containing the font. |
# The default value is: Helvetica. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_FONTNAME = Helvetica |
|
# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of |
# dot graphs. |
# Minimum value: 4, maximum value: 24, default value: 10. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_FONTSIZE = 10 |
|
# By default doxygen will tell dot to use the default font as specified with |
# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set |
# the path where dot can find it using this tag. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_FONTPATH = |
|
# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for |
# each documented class showing the direct and indirect inheritance relations. |
# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
CLASS_GRAPH = YES |
|
# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a |
# graph for each documented class showing the direct and indirect implementation |
# dependencies (inheritance, containment, and class references variables) of the |
# class with other documented classes. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
COLLABORATION_GRAPH = YES |
|
# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for |
# groups, showing the direct groups dependencies. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
GROUP_GRAPHS = YES |
|
# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and |
# collaboration diagrams in a style similar to the OMG's Unified Modeling |
# Language. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
UML_LOOK = NO |
|
# If the UML_LOOK tag is enabled, the fields and methods are shown inside the |
# class node. If there are many fields or methods and many nodes the graph may |
# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the |
# number of items for each type to make the size more manageable. Set this to 0 |
# for no limit. Note that the threshold may be exceeded by 50% before the limit |
# is enforced. So when you set the threshold to 10, up to 15 fields may appear, |
# but if the number exceeds 15, the total amount of fields shown is limited to |
# 10. |
# Minimum value: 0, maximum value: 100, default value: 10. |
# This tag requires that the tag UML_LOOK is set to YES. |
|
UML_LIMIT_NUM_FIELDS = 10 |
|
# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and |
# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS |
# tag is set to YES, doxygen will add type and arguments for attributes and |
# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen |
# will not generate fields with class member information in the UML graphs. The |
# class diagrams will look similar to the default class diagrams but using UML |
# notation for the relationships. |
# Possible values are: NO, YES and NONE. |
# The default value is: NO. |
# This tag requires that the tag UML_LOOK is set to YES. |
|
DOT_UML_DETAILS = NO |
|
# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters |
# to display on a single line. If the actual line length exceeds this threshold |
# significantly it will wrapped across multiple lines. Some heuristics are apply |
# to avoid ugly line breaks. |
# Minimum value: 0, maximum value: 1000, default value: 17. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_WRAP_THRESHOLD = 17 |
|
# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and |
# collaboration graphs will show the relations between templates and their |
# instances. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
TEMPLATE_RELATIONS = NO |
|
# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to |
# YES then doxygen will generate a graph for each documented file showing the |
# direct and indirect include dependencies of the file with other documented |
# files. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
INCLUDE_GRAPH = YES |
|
# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are |
# set to YES then doxygen will generate a graph for each documented file showing |
# the direct and indirect include dependencies of the file with other documented |
# files. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
INCLUDED_BY_GRAPH = YES |
|
# If the CALL_GRAPH tag is set to YES then doxygen will generate a call |
# dependency graph for every global function or class method. |
# |
# Note that enabling this option will significantly increase the time of a run. |
# So in most cases it will be better to enable call graphs for selected |
# functions only using the \callgraph command. Disabling a call graph can be |
# accomplished by means of the command \hidecallgraph. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
CALL_GRAPH = NO |
|
# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller |
# dependency graph for every global function or class method. |
# |
# Note that enabling this option will significantly increase the time of a run. |
# So in most cases it will be better to enable caller graphs for selected |
# functions only using the \callergraph command. Disabling a caller graph can be |
# accomplished by means of the command \hidecallergraph. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
CALLER_GRAPH = NO |
|
# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical |
# hierarchy of all classes instead of a textual one. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
GRAPHICAL_HIERARCHY = YES |
|
# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the |
# dependencies a directory has on other directories in a graphical way. The |
# dependency relations are determined by the #include relations between the |
# files in the directories. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DIRECTORY_GRAPH = YES |
|
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
# generated by dot. For an explanation of the image formats see the section |
# output formats in the documentation of the dot tool (Graphviz (see: |
# http://www.graphviz.org/)). |
# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order |
# to make the SVG files visible in IE 9+ (other browsers do not have this |
# requirement). |
# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, |
# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and |
# png:gdiplus:gdiplus. |
# The default value is: png. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_IMAGE_FORMAT = png |
|
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to |
# enable generation of interactive SVG images that allow zooming and panning. |
# |
# Note that this requires a modern browser other than Internet Explorer. Tested |
# and working are Firefox, Chrome, Safari, and Opera. |
# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make |
# the SVG files visible. Older versions of IE do not have SVG support. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
INTERACTIVE_SVG = NO |
|
# The DOT_PATH tag can be used to specify the path where the dot tool can be |
# found. If left blank, it is assumed the dot tool can be found in the path. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_PATH = |
|
# The DOTFILE_DIRS tag can be used to specify one or more directories that |
# contain dot files that are included in the documentation (see the \dotfile |
# command). |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOTFILE_DIRS = |
|
# The MSCFILE_DIRS tag can be used to specify one or more directories that |
# contain msc files that are included in the documentation (see the \mscfile |
# command). |
|
MSCFILE_DIRS = |
|
# The DIAFILE_DIRS tag can be used to specify one or more directories that |
# contain dia files that are included in the documentation (see the \diafile |
# command). |
|
DIAFILE_DIRS = |
|
# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the |
# path where java can find the plantuml.jar file. If left blank, it is assumed |
# PlantUML is not used or called during a preprocessing step. Doxygen will |
# generate a warning when it encounters a \startuml command in this case and |
# will not generate output for the diagram. |
|
PLANTUML_JAR_PATH = |
|
# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a |
# configuration file for plantuml. |
|
PLANTUML_CFG_FILE = |
|
# When using plantuml, the specified paths are searched for files specified by |
# the !include statement in a plantuml block. |
|
PLANTUML_INCLUDE_PATH = |
|
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes |
# that will be shown in the graph. If the number of nodes in a graph becomes |
# larger than this value, doxygen will truncate the graph, which is visualized |
# by representing a node as a red box. Note that doxygen if the number of direct |
# children of the root node in a graph is already larger than |
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that |
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
# Minimum value: 0, maximum value: 10000, default value: 50. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_GRAPH_MAX_NODES = 50 |
|
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs |
# generated by dot. A depth value of 3 means that only nodes reachable from the |
# root by following a path via at most 3 edges will be shown. Nodes that lay |
# further from the root node will be omitted. Note that setting this option to 1 |
# or 2 may greatly reduce the computation time needed for large code bases. Also |
# note that the size of a graph can be further restricted by |
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
# Minimum value: 0, maximum value: 1000, default value: 0. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
MAX_DOT_GRAPH_DEPTH = 0 |
|
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
# background. This is disabled by default, because dot on Windows does not seem |
# to support this out of the box. |
# |
# Warning: Depending on the platform used, enabling this option may lead to |
# badly anti-aliased labels on the edges of a graph (i.e. they become hard to |
# read). |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_TRANSPARENT = NO |
|
# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output |
# files in one run (i.e. multiple -o and -T options on the command line). This |
# makes dot run faster, but since only newer versions of dot (>1.8.10) support |
# this, this feature is disabled by default. |
# The default value is: NO. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
DOT_MULTI_TARGETS = NO |
|
# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page |
# explaining the meaning of the various boxes and arrows in the dot generated |
# graphs. |
# The default value is: YES. |
# This tag requires that the tag HAVE_DOT is set to YES. |
|
GENERATE_LEGEND = YES |
|
# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate |
# files that are used to generate the various graphs. |
# |
# Note: This setting is not only used for dot files but also for msc and |
# plantuml temporary files. |
# The default value is: YES. |
|
DOT_CLEANUP = YES |