1,10 → 1,22 |
|
#include <types.h> |
#include <list.h> |
#include <pci_regs.h> |
|
#ifndef __PCI_H__ |
#define __PCI_H__ |
|
|
/* pci_slot represents a physical slot */ |
struct pci_slot { |
struct pci_bus *bus; /* The bus this slot is on */ |
struct list_head list; /* node in list of slots on this bus */ |
// struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */ |
unsigned char number; /* PCI_SLOT(pci_dev->devfn) */ |
// struct kobject kobj; |
}; |
|
|
#define PCI_ANY_ID (~0) |
|
|
134,145 → 146,7 |
#define PCI_CLASS_OTHERS 0xff |
|
|
/* |
* Under PCI, each device has 256 bytes of configuration address space, |
* of which the first 64 bytes are standardized as follows: |
*/ |
#define PCI_VENDOR_ID 0x000 /* 16 bits */ |
#define PCI_DEVICE_ID 0x002 /* 16 bits */ |
#define PCI_COMMAND 0x004 /* 16 bits */ |
#define PCI_COMMAND_IO 0x001 /* Enable response in I/O space */ |
#define PCI_COMMAND_MEMORY 0x002 /* Enable response in Memory space */ |
#define PCI_COMMAND_MASTER 0x004 /* Enable bus mastering */ |
#define PCI_COMMAND_SPECIAL 0x008 /* Enable response to special cycles */ |
#define PCI_COMMAND_INVALIDATE 0x010 /* Use memory write and invalidate */ |
#define PCI_COMMAND_VGA_PALETTE 0x020 /* Enable palette snooping */ |
#define PCI_COMMAND_PARITY 0x040 /* Enable parity checking */ |
#define PCI_COMMAND_WAIT 0x080 /* Enable address/data stepping */ |
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ |
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ |
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ |
|
#define PCI_STATUS 0x006 /* 16 bits */ |
#define PCI_STATUS_CAP_LIST 0x010 /* Support Capability List */ |
#define PCI_STATUS_66MHZ 0x020 /* Support 66 Mhz PCI 2.1 bus */ |
#define PCI_STATUS_UDF 0x040 /* Support User Definable Features [obsolete] */ |
#define PCI_STATUS_FAST_BACK 0x080 /* Accept fast-back to back */ |
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ |
#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ |
#define PCI_STATUS_DEVSEL_FAST 0x000 |
#define PCI_STATUS_DEVSEL_MEDIUM 0x200 |
#define PCI_STATUS_DEVSEL_SLOW 0x400 |
#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ |
#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ |
#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ |
#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ |
#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ |
|
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ |
#define PCI_REVISION_ID 0x08 /* Revision ID */ |
#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ |
#define PCI_CLASS_DEVICE 0x0a /* Device class */ |
|
#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ |
#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ |
#define PCI_HEADER_TYPE 0x0e /* 8 bits */ |
#define PCI_HEADER_TYPE_NORMAL 0 |
#define PCI_HEADER_TYPE_BRIDGE 1 |
#define PCI_HEADER_TYPE_CARDBUS 2 |
|
#define PCI_BIST 0x0f /* 8 bits */ |
#define PCI_BIST_CODE_MASK 0x0f /* Return result */ |
#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ |
#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ |
|
/* |
* Base addresses specify locations in memory or I/O space. |
* Decoded size can be determined by writing a value of |
* 0xffffffff to the register, and reading it back. Only |
* 1 bits are decoded. |
*/ |
#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ |
#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ |
#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ |
#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ |
#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ |
#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ |
#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ |
#define PCI_BASE_ADDRESS_SPACE_IO 0x01 |
#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 |
#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 |
#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ |
#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ |
#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ |
#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ |
#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) |
#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) |
/* bit 1 is reserved if address_space = 1 */ |
|
#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ |
|
/* Header type 0 (normal devices) */ |
#define PCI_CARDBUS_CIS 0x28 |
#define PCI_SUBSYSTEM_VENDOR_ID 0x2c |
#define PCI_SUBSYSTEM_ID 0x2e |
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ |
#define PCI_ROM_ADDRESS_ENABLE 0x01 |
#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) |
|
#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ |
#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ |
|
|
#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 |
#define PCI_CB_SUBSYSTEM_ID 0x42 |
|
#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ |
#define PCI_CB_CAPABILITY_LIST 0x14 |
/* Capability lists */ |
|
#define PCI_CAP_LIST_ID 0 /* Capability ID */ |
#define PCI_CAP_ID_PM 0x01 /* Power Management */ |
#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ |
#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ |
#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ |
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ |
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ |
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ |
#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ |
#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific capability */ |
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ |
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ |
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ |
#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ |
#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ |
#define PCI_CAP_SIZEOF 4 |
|
|
/* AGP registers */ |
|
#define PCI_AGP_VERSION 2 /* BCD version number */ |
#define PCI_AGP_RFU 3 /* Rest of capability flags */ |
#define PCI_AGP_STATUS 4 /* Status register */ |
#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ |
#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ |
#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ |
#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ |
#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ |
#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ |
#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ |
#define PCI_AGP_COMMAND 8 /* Control register */ |
#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ |
#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ |
#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ |
#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ |
#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ |
#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ |
#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ |
#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ |
#define PCI_AGP_SIZEOF 12 |
|
|
#define PCI_MAP_REG_START 0x10 |
#define PCI_MAP_REG_END 0x28 |
#define PCI_MAP_ROM_REG 0x30 |
334,8 → 208,28 |
#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f) |
#define PCI_FUNC(devfn) ((devfn) & 0x07) |
|
/* Ioctls for /proc/bus/pci/X/Y nodes. */ |
#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8) |
#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */ |
#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */ |
#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */ |
#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */ |
|
|
typedef unsigned int __bitwise pci_channel_state_t; |
|
enum pci_channel_state { |
/* I/O channel is in normal state */ |
pci_channel_io_normal = (__force pci_channel_state_t) 1, |
|
/* I/O to channel is blocked */ |
pci_channel_io_frozen = (__force pci_channel_state_t) 2, |
|
/* PCI card is dead */ |
pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, |
}; |
|
|
typedef unsigned int PCITAG; |
|
extern inline PCITAG |
354,6 → 248,11 |
struct resource *parent, *sibling, *child; |
}; |
|
/* This defines the direction arg to the DMA mapping routines. */ |
#define PCI_DMA_BIDIRECTIONAL 0 |
#define PCI_DMA_TODEVICE 1 |
#define PCI_DMA_FROMDEVICE 2 |
#define PCI_DMA_NONE 3 |
|
/* |
* For PCI devices, the region numbers are assigned this way: |
454,6 → 353,8 |
#define IORESOURCE_PCI_FIXED (1<<4) /* Do not move resource */ |
|
|
|
|
/* |
* For PCI devices, the region numbers are assigned this way: |
* |
472,32 → 373,48 |
|
#define DEVICE_COUNT_RESOURCE 12 |
|
|
#define PCI_CFG_SPACE_SIZE 256 |
#define PCI_CFG_SPACE_EXP_SIZE 4096 |
|
|
typedef int __bitwise pci_power_t; |
|
#define PCI_D0 ((pci_power_t __force) 0) |
#define PCI_D1 ((pci_power_t __force) 1) |
#define PCI_D2 ((pci_power_t __force) 2) |
#define PCI_D3hot ((pci_power_t __force) 3) |
#define PCI_D3cold ((pci_power_t __force) 4) |
#define PCI_UNKNOWN ((pci_power_t __force) 5) |
#define PCI_POWER_ERROR ((pci_power_t __force) -1) |
|
/* |
* The pci_dev structure is used to describe PCI devices. |
*/ |
struct pci_dev { |
// struct list_head bus_list; /* node in per-bus list */ |
// struct pci_bus *bus; /* bus this device is on */ |
// struct pci_bus *subordinate; /* bus this device bridges to */ |
struct list_head bus_list; /* node in per-bus list */ |
struct pci_bus *bus; /* bus this device is on */ |
struct pci_bus *subordinate; /* bus this device bridges to */ |
|
// void *sysdata; /* hook for sys-specific extension */ |
void *sysdata; /* hook for sys-specific extension */ |
// struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ |
// struct pci_slot *slot; /* Physical slot this device is in */ |
u32_t bus; |
u32_t devfn; /* encoded device & function index */ |
u16_t vendor; |
u16_t device; |
u16_t subsystem_vendor; |
u16_t subsystem_device; |
u32_t class; /* 3 bytes: (base,sub,prog-if) */ |
uint8_t revision; /* PCI revision, low byte of class word */ |
uint8_t hdr_type; /* PCI header type (`multi' flag masked out) */ |
uint8_t pcie_type; /* PCI-E device/port type */ |
uint8_t rom_base_reg; /* which config register controls the ROM */ |
uint8_t pin; /* which interrupt pin this device uses */ |
struct pci_slot *slot; /* Physical slot this device is in */ |
u32_t busnr; |
unsigned int devfn; /* encoded device & function index */ |
unsigned short vendor; |
unsigned short device; |
unsigned short subsystem_vendor; |
unsigned short subsystem_device; |
unsigned int class; /* 3 bytes: (base,sub,prog-if) */ |
u8 revision; /* PCI revision, low byte of class word */ |
u8 hdr_type; /* PCI header type (`multi' flag masked out) */ |
u8 pcie_cap; /* PCI-E capability offset */ |
u8 pcie_type; /* PCI-E device/port type */ |
u8 rom_base_reg; /* which config register controls the ROM */ |
u8 pin; /* which interrupt pin this device uses */ |
|
// struct pci_driver *driver; /* which driver has allocated this device */ |
uint64_t dma_mask; /* Mask of the bits of bus address this |
u64 dma_mask; /* Mask of the bits of bus address this |
device implements. Normally this is |
0xffffffff. You only need to change |
this if your device has broken DMA |
505,21 → 422,26 |
|
// struct device_dma_parameters dma_parms; |
|
// pci_power_t current_state; /* Current operating state. In ACPI-speak, |
// this is D0-D3, D0 being fully functional, |
// and D3 being off. */ |
// int pm_cap; /* PM capability offset in the |
// configuration space */ |
pci_power_t current_state; /* Current operating state. In ACPI-speak, |
this is D0-D3, D0 being fully functional, |
and D3 being off. */ |
int pm_cap; /* PM capability offset in the |
configuration space */ |
unsigned int pme_support:5; /* Bitmask of states from which PME# |
can be generated */ |
unsigned int pme_interrupt:1; |
unsigned int d1_support:1; /* Low power state D1 is supported */ |
unsigned int d2_support:1; /* Low power state D2 is supported */ |
unsigned int no_d1d2:1; /* Only allow D0 and D3 */ |
unsigned int mmio_always_on:1; /* disallow turning off io/mem |
decoding during bar sizing */ |
unsigned int wakeup_prepared:1; |
unsigned int d3_delay; /* D3->D0 transition time in ms */ |
|
// pci_channel_state_t error_state; /* current connectivity state */ |
pci_channel_state_t error_state; /* current connectivity state */ |
struct device dev; /* Generic device interface */ |
|
// int cfg_size; /* Size of configuration space */ |
int cfg_size; /* Size of configuration space */ |
|
/* |
* Instead of touching interrupt line and base address registers |
542,13 → 464,18 |
unsigned int msix_enabled:1; |
unsigned int ari_enabled:1; /* ARI forwarding */ |
unsigned int is_managed:1; |
unsigned int is_pcie:1; |
unsigned int is_pcie:1; /* Obsolete. Will be removed. |
Use pci_is_pcie() instead */ |
unsigned int needs_freset:1; /* Dev requires fundamental reset */ |
unsigned int state_saved:1; |
unsigned int is_physfn:1; |
unsigned int is_virtfn:1; |
// pci_dev_flags_t dev_flags; |
// atomic_t enable_cnt; /* pci_enable_device has been called */ |
unsigned int reset_fn:1; |
unsigned int is_hotplug_bridge:1; |
unsigned int __aer_firmware_first_valid:1; |
unsigned int __aer_firmware_first:1; |
|
|
// u32 saved_config_space[16]; /* config space saved at suspend time */ |
// struct hlist_head saved_cap_space; |
// struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ |
606,7 → 533,29 |
int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val); |
}; |
|
/* |
* The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond |
* to P2P or CardBus bridge windows) go in a table. Additional ones (for |
* buses below host bridges or subtractive decode bridges) go in the list. |
* Use pci_bus_for_each_resource() to iterate through all the resources. |
*/ |
|
/* |
* PCI_SUBTRACTIVE_DECODE means the bridge forwards the window implicitly |
* and there's no way to program the bridge with the details of the window. |
* This does not apply to ACPI _CRS windows, even with the _DEC subtractive- |
* decode bit set, because they are explicit and can be programmed with _SRS. |
*/ |
#define PCI_SUBTRACTIVE_DECODE 0x1 |
|
struct pci_bus_resource { |
struct list_head list; |
struct resource *res; |
unsigned int flags; |
}; |
|
#define PCI_REGION_FLAG_MASK 0x0fU /* These bits of resource flags tell us the PCI region flags */ |
|
struct pci_bus { |
struct list_head node; /* node in list of buses */ |
struct pci_bus *parent; /* parent bus this bridge is on */ |
638,6 → 587,9 |
|
#define pci_bus_b(n) list_entry(n, struct pci_bus, node) |
#define to_pci_bus(n) container_of(n, struct pci_bus, dev) |
#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) |
#define to_pci_dev(n) container_of(n, struct pci_dev, dev) |
#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) |
|
|
static inline int pci_domain_nr(struct pci_bus *bus) |
645,8 → 597,33 |
struct pci_sysdata *sd = bus->sysdata; |
return sd->domain; |
} |
static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false; } |
|
/* |
* Error values that may be returned by PCI functions. |
*/ |
#define PCIBIOS_SUCCESSFUL 0x00 |
#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81 |
#define PCIBIOS_BAD_VENDOR_ID 0x83 |
#define PCIBIOS_DEVICE_NOT_FOUND 0x86 |
#define PCIBIOS_BAD_REGISTER_NUMBER 0x87 |
#define PCIBIOS_SET_FAILED 0x88 |
#define PCIBIOS_BUFFER_TOO_SMALL 0x89 |
|
/* Low-level architecture-dependent routines */ |
|
struct pci_bus_region { |
resource_size_t start; |
resource_size_t end; |
}; |
|
|
|
|
|
|
|
|
int enum_pci_devices(void); |
|
struct pci_device_id* |
658,10 → 635,46 |
|
struct pci_bus * pci_create_bus(int bus, struct pci_ops *ops, void *sysdata); |
struct pci_bus * pci_find_bus(int domain, int busnr); |
int pci_find_capability(struct pci_dev *dev, int cap); |
int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); |
int pci_find_ext_capability(struct pci_dev *dev, int cap); |
int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, |
int cap); |
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); |
struct pci_bus * pci_find_next_bus(const struct pci_bus *from); |
|
static inline bool pci_is_root_bus(struct pci_bus *pbus) |
{ |
return !(pbus->parent); |
} |
|
/** |
* pci_pcie_cap - get the saved PCIe capability offset |
* @dev: PCI device |
* |
* PCIe capability offset is calculated at PCI device initialization |
* time and saved in the data structure. This function returns saved |
* PCIe capability offset. Using this instead of pci_find_capability() |
* reduces unnecessary search in the PCI configuration space. If you |
* need to calculate PCIe capability offset from raw device for some |
* reasons, please use pci_find_capability() instead. |
*/ |
static inline int pci_pcie_cap(struct pci_dev *dev) |
{ |
return dev->pcie_cap; |
} |
|
/** |
* pci_is_pcie - check if the PCI device is PCI Express capable |
* @dev: PCI device |
* |
* Retrun true if the PCI device is PCI Express capable, false otherwise. |
*/ |
static inline bool pci_is_pcie(struct pci_dev *dev) |
{ |
return !!pci_pcie_cap(dev); |
} |
|
#define pci_name(x) "radeon" |
|
#endif //__PCI__H__ |