14,56 → 14,45 |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
|
; TODO: make better use of the available descriptors |
format PE DLL native |
entry START |
|
format MS COFF |
CURRENT_API = 0x0200 |
COMPATIBLE_API = 0x0100 |
API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
|
API_VERSION = 0x01000100 |
DRIVER_VERSION = 5 |
|
MAX_DEVICES = 16 |
|
DEBUG = 1 |
__DEBUG__ = 1 |
__DEBUG_LEVEL__ = 2 |
|
section '.flat' readable writable executable |
|
include '../proc32.inc' |
include '../struct.inc' |
include '../macros.inc' |
include '../proc32.inc' |
include '../imports.inc' |
include '../fdo.inc' |
include '../netdrv.inc' |
include '../netdrv_pe.inc' |
|
public START |
public service_proc |
public version |
struct device ETH_DEVICE |
|
mmio_addr dd ? |
pci_bus dd ? |
pci_dev dd ? |
irq_line db ? |
|
virtual at ebx |
device: |
ETH_DEVICE |
cur_tx dd ? |
last_tx dd ? |
|
.mmio_addr dd ? |
.pci_bus dd ? |
.pci_dev dd ? |
.irq_line db ? |
rb 0x100 - ($ and 0xff) ; align 256 |
rx_desc rd 256/8 |
|
.cur_tx dd ? |
.last_tx dd ? |
rb 0x100 - ($ and 0xff) ; align 256 |
tx_desc rd 256/8 |
|
rb 0x100 - (($ - device) and 0xff) |
.rx_desc rd 256/8 |
ends |
|
rb 0x100 - (($ - device) and 0xff) |
.tx_desc rd 256/8 |
|
sizeof.device_struct = $ - device |
|
end virtual |
|
section '.flat' code readable align 16 |
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; proc START ;; |
71,21 → 60,17 |
;; (standard driver proc) ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
|
align 4 |
proc START stdcall, state:dword |
proc START c, reason:dword, cmdline:dword |
|
cmp [state], 1 |
jne .exit |
cmp [reason], DRV_ENTRY |
jne .fail |
|
.entry: |
|
DEBUGF 2,"Loading driver\n" |
stdcall RegService, my_service, service_proc |
DEBUGF 1,"Loading driver\n" |
invoke RegService, my_service, service_proc |
ret |
|
.fail: |
.exit: |
xor eax, eax |
xor eax, eax |
ret |
|
endp |
92,7 → 77,6 |
|
|
|
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; proc SERVICE_PROC ;; |
100,7 → 84,6 |
;; (standard driver proc) ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
|
align 4 |
proc service_proc stdcall, ioctl:dword |
|
mov edx, [ioctl] |
142,9 → 125,9 |
mov ax, [eax+1] ; |
.nextdevice: |
mov ebx, [esi] |
cmp al, byte [device.pci_bus] |
cmp al, byte [ebx + device.pci_bus] |
jne .next |
cmp ah, byte [device.pci_dev] |
cmp ah, byte [ebx + device.pci_dev] |
je .find_devicenum ; Device is already loaded, let's find it's device number |
.next: |
add esi, 4 |
156,26 → 139,26 |
cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
jae .fail |
|
allocate_and_clear ebx, sizeof.device_struct, .fail ; Allocate the buffer for device structure |
allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure |
|
; Fill in the direct call addresses into the struct |
|
mov [device.reset], reset |
mov [device.transmit], transmit |
mov [device.unload], unload |
mov [device.name], my_service |
mov [ebx + device.reset], reset |
mov [ebx + device.transmit], transmit |
mov [ebx + device.unload], unload |
mov [ebx + device.name], my_service |
|
; save the pci bus and device numbers |
|
mov eax, [edx + IOCTL.input] |
movzx ecx, byte [eax+1] |
mov [device.pci_bus], ecx |
mov [ebx + device.pci_bus], ecx |
movzx ecx, byte [eax+2] |
mov [device.pci_dev], ecx |
mov [ebx + device.pci_dev], ecx |
|
; Now, it's time to find the base mmio addres of the PCI device |
|
PCI_find_mmio32 |
stdcall PCI_find_mmio32, [ebx + device.pci_bus], [ebx + device.pci_dev] |
|
; Create virtual mapping of the physical memory |
|
182,15 → 165,16 |
push 1Bh ; PG_SW+PG_NOCACHE |
push 10000h ; size of the map |
push eax |
call MapIoMem |
mov [device.mmio_addr], eax |
invoke MapIoMem |
mov [ebx + device.mmio_addr], eax |
|
; We've found the mmio address, find IRQ now |
|
PCI_find_irq |
invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
mov [ebx + device.irq_line], al |
|
DEBUGF 1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
[device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.mmio_addr]:8 |
[ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.mmio_addr]:8 |
|
; Ok, the eth_device structure is ready, let's probe the device |
call probe ; this function will output in eax |
201,8 → 185,8 |
mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
inc [devices] ; |
|
mov [device.type], NET_TYPE_ETH |
call NetRegDev |
mov [ebx + device.type], NET_TYPE_ETH |
invoke NetRegDev |
|
cmp eax, -1 |
je .destroy |
213,7 → 197,7 |
|
.find_devicenum: |
DEBUGF 1,"Trying to find device number of already registered device\n" |
call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
; into a device number in edi |
mov eax, edi ; Application wants it in eax instead |
DEBUGF 1,"Kernel says: %u\n", eax |
225,7 → 209,7 |
; todo: reset device into virgin state |
|
.err: |
stdcall KernelFree, ebx |
invoke KernelFree, ebx |
|
.fail: |
or eax, -1 |
241,8 → 225,6 |
;; ;; |
;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
|
|
align 4 |
unload: |
; TODO: (in this particular order) |
; |
260,30 → 242,32 |
|
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
;; |
;; probe: enables the device (if it really is I8254X) |
;; probe: enables the device (if it really is BCM57XX) |
;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
align 4 |
|
probe: |
|
DEBUGF 1,"Probe\n" |
|
PCI_make_bus_master |
; Make the device a bus master |
invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command |
or al, PCI_CMD_MASTER |
invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax |
|
|
; TODO: validate the device |
|
|
|
|
|
align 4 |
reset: |
|
DEBUGF 1,"Reset\n" |
|
movzx eax, [device.irq_line] |
movzx eax, [ebx + device.irq_line] |
DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
stdcall AttachIntHandler, eax, int_handler, dword 0 |
invoke AttachIntHandler, eax, int_handler, ebx |
test eax, eax |
jnz @f |
DEBUGF 1,"\nCould not attach int handler!\n" |
294,10 → 278,10 |
call read_mac |
|
; Set the mtu, kernel will be able to send now |
mov [device.mtu], 1514 |
mov [ebx + device.mtu], 1514 |
|
; Set link state to unknown |
mov [device.state], ETH_LINK_UNKOWN |
mov [ebx + device.state], ETH_LINK_UNKNOWN |
|
ret |
|
309,14 → 293,14 |
|
DEBUGF 1,"Read MAC\n" |
|
mov esi, [device.mmio_addr] |
lea edi, [device.mac] |
mov esi, [ebx + device.mmio_addr] |
lea edi, [ebx + device.mac] |
movsd |
movsw |
|
.mac_ok: |
DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\ |
[device.mac+0]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 |
[ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2 |
|
ret |
|
330,39 → 314,49 |
;; pointer to device structure in ebx ;; |
;; ;; |
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
align 4 |
transmit: |
DEBUGF 2,"\nTransmitting packet, buffer:%x, size:%u\n", [esp+4], [esp+8] |
mov eax, [esp+4] |
DEBUGF 2,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
|
proc transmit stdcall bufferptr, buffersize |
|
pushf |
cli |
|
DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] |
mov eax, [bufferptr] |
DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
[eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
[eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
[eax+13]:2,[eax+12]:2 |
|
cmp dword [esp + 8], 1514 |
cmp [buffersize], 1514 |
ja .fail |
cmp dword [esp + 8], 60 |
cmp [buffersize], 60 |
jb .fail |
|
|
|
|
|
; Update stats |
inc [device.packets_tx] |
mov eax, [esp + 8] |
add dword [device.bytes_tx], eax |
adc dword [device.bytes_tx + 4], 0 |
inc [ebx + device.packets_tx] |
mov eax, [buffersize] |
add dword[ebx + device.bytes_tx], eax |
adc dword[ebx + device.bytes_tx + 4], 0 |
|
DEBUGF 1,"Transmit OK\n" |
popf |
xor eax, eax |
ret 8 |
ret |
|
.fail: |
DEBUGF 1,"Send failed\n" |
stdcall KernelFree, [esp+4] |
DEBUGF 2,"Transmit failed\n" |
invoke KernelFree, [bufferptr] |
popf |
or eax, -1 |
ret 8 |
ret |
|
endp |
|
|
;;;;;;;;;;;;;;;;;;;;;;; |
;; ;; |
;; Interrupt handler ;; |
374,7 → 368,7 |
|
push ebx esi edi |
|
DEBUGF 1,"\n%s int\n", my_service |
DEBUGF 1,"INT\n" |
;------------------------------------------- |
; Find pointer of device wich made IRQ occur |
|
385,7 → 379,7 |
.nextdevice: |
mov ebx, [esi] |
|
; mov edi, [device.mmio_addr] |
; mov edi, [ebx + device.mmio_addr] |
; mov eax, [edi + REG_ICR] |
test eax, eax |
jnz .got_it |
414,15 → 408,17 |
|
; End of code |
|
section '.data' data readable writable align 16 |
align 4 |
data fixups |
end data |
|
devices dd 0 |
version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) |
include '../peimport.inc' |
|
my_service db 'BCM57XX',0 ; max 16 chars include zero |
|
include_debug_strings ; All data wich FDO uses will be included here |
|
align 4 |
devices dd 0 |
device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling |
|
|