Subversion Repositories Kolibri OS

; standard driver stuff

format MS COFF

DEBUG = 1

DUMP_PACKETS = 0

; this is for DEBUGF macro from 'fdo.inc'

__DEBUG__ = 1

__DEBUG_LEVEL__ = 1

include 'proc32.inc'

include 'imports.inc'

include 'fdo.inc'

public START

public version

; USB constants

DEVICE_DESCR_TYPE = 1

CONFIG_DESCR_TYPE = 2

STRING_DESCR_TYPE = 3

INTERFACE_DESCR_TYPE = 4

ENDPOINT_DESCR_TYPE = 5

DEVICE_QUALIFIER_DESCR_TYPE = 6

CONTROL_PIPE = 0

ISOCHRONOUS_PIPE = 1

BULK_PIPE = 2

INTERRUPT_PIPE = 3

; USB structures

virtual at 0

config_descr:

.bLength                db      ?

.bDescriptorType        db      ?

.wTotalLength           dw      ?

.bNumInterfaces         db      ?

.bConfigurationValue    db      ?

.iConfiguration         db      ?

.bmAttributes           db      ?

.bMaxPower              db      ?

.sizeof:

end virtual

virtual at 0

interface_descr:

.bLength                db      ?

.bDescriptorType        db      ?

.bInterfaceNumber       db      ?

.bAlternateSetting      db      ?

.bNumEndpoints          db      ?

.bInterfaceClass        db      ?

.bInterfaceSubClass     db      ?

.bInterfaceProtocol     db      ?

.iInterface             db      ?

.sizeof:

end virtual

virtual at 0

endpoint_descr:

.bLength                db      ?

.bDescriptorType        db      ?

.bEndpointAddress       db      ?

.bmAttributes           db      ?

.wMaxPacketSize         dw      ?

.bInterval              db      ?

.sizeof:

end virtual

; Mass storage protocol constants, USB layer

REQUEST_GETMAXLUN = 0xFE        ; get max lun

REQUEST_BORESET = 0xFF          ; bulk-only reset

; Mass storage protocol structures, USB layer

; Sent from host to device in the first stage of an operation.

struc command_block_wrapper

{

.Signature      dd      ?       ; the constant 'USBC'

.Tag            dd      ?       ; identifies response with request

.Length         dd      ?       ; length of data-transport phase

.Flags          db      ?       ; one of CBW_FLAG_*

CBW_FLAG_OUT = 0

CBW_FLAG_IN = 80h

.LUN            db      ?       ; addressed unit

.CommandLength  db      ?       ; the length of the following field

.Command        rb      16

.sizeof:

}

virtual at 0

command_block_wrapper   command_block_wrapper

end virtual

; Sent from device to host in the last stage of an operation.

struc command_status_wrapper

{

.Signature      dd      ?       ; the constant 'USBS'

.Tag            dd      ?       ; identifies response with request

.LengthRest     dd      ?       ; .Length - (size of data which were transferred)

.Status         db      ?       ; one of CSW_STATUS_*

CSW_STATUS_OK = 0

CSW_STATUS_FAIL = 1

CSW_STATUS_FATAL = 2

.sizeof:

}

virtual at 0

command_status_wrapper  command_status_wrapper

end virtual

; Constants of SCSI layer

SCSI_REQUEST_SENSE = 3

SCSI_INQUIRY = 12h

SCSI_READ_CAPACITY = 25h

SCSI_READ10 = 28h

SCSI_WRITE10 = 2Ah

; Result of SCSI REQUEST SENSE command.

SENSE_UNKNOWN = 0

SENSE_RECOVERED_ERROR = 1

SENSE_NOT_READY = 2

SENSE_MEDIUM_ERROR = 3

SENSE_HARDWARE_ERROR = 4

SENSE_ILLEGAL_REQUEST = 5

SENSE_UNIT_ATTENTION = 6

SENSE_DATA_PROTECT = 7

SENSE_BLANK_CHECK = 8

; 9 is vendor-specific

SENSE_COPY_ABORTED = 10

SENSE_ABORTED_COMMAND = 11

SENSE_EQUAL = 12

SENSE_VOLUME_OVERFLOW = 13

SENSE_MISCOMPARE = 14

; 15 is reserved

; Structures of SCSI layer

; Result of SCSI INQUIRY request.

struc inquiry_data

{

.PeripheralDevice       db      ?       ; lower 5 bits are PeripheralDeviceType

                                        ; upper 3 bits are PeripheralQualifier

.RemovableMedium        db      ?       ; upper bit is RemovableMedium

                                        ; other bits are for compatibility

.Version                db      ?       ; lower 3 bits are ANSI-Approved version

                                        ; next 3 bits are ECMA version

                                        ; upper 2 bits are ISO version

.ResponseDataFormat     db      ?       ; lower 4 bits are ResponseDataFormat

                                        ; bit 6 is TrmIOP

                                        ; bit 7 is AENC

.AdditionalLength       db      ?

                        dw      ?       ; reserved

.Flags                  db      ?

.VendorID               rb      8       ; vendor ID, big-endian

.ProductID              rb      16      ; product ID, big-endian

.ProductRevBE           dd      ?       ; product revision, big-endian

.sizeof:

}

virtual at 0

inquiry_data inquiry_data

end virtual

struc sense_data

{

.ErrorCode              db      ?       ; lower 7 bits are error code:

                                        ; 70h = current error,

                                        ; 71h = deferred error

                                        ; upper bit is InformationValid

.SegmentNumber          db      ?       ; number of segment descriptor

                                        ; for commands COPY [+VERIFY], COMPARE

.SenseKey               db      ?       ; bits 0-3 are one of SENSE_*

                                        ; bit 4 is reserved

                                        ; bit 5 is IncorrectLengthIndicator

                                        ; bits 6 and 7 are used by

                                        ; sequential-access devices

.Information            dd      ?       ; command-specific

.AdditionalLength       db      ?       ; length of data starting here

.CommandInformation     dd      ?       ; command-specific

.AdditionalSenseCode    db      ?       ; \ more detailed error code

.AdditionalSenseQual    db      ?       ; / standard has a large table of them

.FRUCode                db      ?       ; which part of device has failed

                                        ; (device-specific, not regulated)

.SenseKeySpecific       rb      3       ; depends on SenseKey

.sizeof:

}

virtual at 0

sense_data sense_data

end virtual

; Device data

; USB Mass storage device has one or more logical units, identified by LUN,

; logical unit number. The highest value of LUN, that is, number of units

; minus 1, can be obtained via control request Get Max LUN.

virtual at 0

usb_device_data:

.ConfigPipe             dd      ?       ; configuration pipe

.OutPipe                dd      ?       ; pipe for OUT bulk endpoint

.InPipe                 dd      ?       ; pipe for IN bulk endpoint

.MaxLUN                 dd      ?       ; maximum Logical Unit Number

.LogicalDevices         dd      ?       ; pointer to array of usb_unit_data

; 1 for a connected USB device, 1 for each disk device

; the structure can be freed when .NumReferences decreases to zero

.NumReferences          dd      ?       ; number of references

.ConfigRequest          rb      8       ; buffer for configuration requests

.LengthRest             dd      ?       ; Length - (size of data which were transferred)

; All requests to a given device are serialized,

; only one request to a given device can be processed at a time.

; The current request and all pending requests are organized in the following

; queue, the head being the current request.

; NB: the queue must be device-wide due to the protocol:

; data stage is not tagged (unlike command_*_wrapper), so the only way to know

; what request the data are associated with is to guarantee that only one

; request is processing at the time.

.RequestsQueue          rd      2

.QueueLock              rd      3       ; protects .RequestsQueue

.InquiryData            inquiry_data    ; information about device

; data for the current request

.Command                command_block_wrapper

.DeviceDisconnected     db      ?

.Status                 command_status_wrapper

.Sense                  sense_data

.sizeof:

end virtual

; Information about one logical device.

virtual at 0

usb_unit_data:

.Parent         dd      ?       ; pointer to parent usb_device_data

.LUN            db      ?       ; index in usb_device_data.LogicalDevices array

.DiskIndex      db      ?       ; for name "usbhd"

.MediaPresent   db      ?

                db      ?       ; alignment

.DiskDevice     dd      ?       ; handle of disk device or NULL

.SectorSize     dd      ?       ; sector size

; For some devices, the first request to the medium fails with 'unit not ready'.

; When the code sees this status, it retries the command several times.

; Two following variables track the retry count and total time for those;

; total time is currently used only for debug output.

.UnitReadyAttempts      dd      ?

.TimerTicks             dd      ?

.sizeof:

end virtual

; This is the structure for items in the queue usb_device_data.RequestsQueue.

virtual at 0

request_queue_item:

.Next           dd      ?       ; next item in the queue

.Prev           dd      ?       ; prev item in the queue

.ReqBuilder     dd      ?       ; procedure to fill command_block_wrapper

.Buffer         dd      ?       ; input or output data

                                ; (length is command_block_wrapper.Length)

.Callback       dd      ?       ; procedure to call in the end of transfer

.UserData       dd      ?       ; passed as-is to .Callback

; There are 3 possible stages of any request, one of them optional:

; command stage (host sends command_block_wrapper to device),

; optional data stage,

; status stage (device sends command_status_wrapper to host).

; Also, if a request fails, the code queues additional request

; SCSI_REQUEST_SENSE; sense_data from SCSI_REQUEST_SENSE

; contains some information about the error.

.Stage          db      ?

.sizeof:

end virtual

section '.flat' code readable align 16

; The start procedure.

proc START

virtual at esp

        dd      ?       ; return address

.reason dd      ?       ; DRV_ENTRY or DRV_EXIT

end virtual

; 1. Test whether the procedure is called with the argument DRV_ENTRY.

; If not, return 0.

        xor     eax, eax        ; initialize return value

        cmp     [.reason], 1    ; compare the argument

        jnz     .nothing

; 2. Initialize: we have one global mutex.

        mov     ecx, free_numbers_lock

        call    MutexInit

; 3. Register self as a USB driver.

; The name is my_driver = 'usbstor'; IOCTL interface is not supported;

; usb_functions is an offset of a structure with callback functions.

        stdcall RegUSBDriver, my_driver, 0, usb_functions

; 4. Return the returned value of RegUSBDriver.

.nothing:

        ret     4

endp

; Helper procedures to work with requests queue.

; Add a request to the queue. Stdcall with 5 arguments.

proc queue_request

        push    ebx esi

virtual at esp

                rd      2       ; saved registers

                dd      ?       ; return address

.device         dd      ?       ; pointer to usb_device_data

.ReqBuilder     dd      ?       ; request_queue_item.ReqBuilder

.Buffer         dd      ?       ; request_queue_item.Buffer

.Callback       dd      ?       ; request_queue_item.Callback

.UserData       dd      ?       ; request_queue_item.UserData

end virtual

; 1. Allocate the memory for the request description.

        movi    eax, request_queue_item.sizeof

        call    Kmalloc

        test    eax, eax

        jnz     @f

        mov     esi, nomemory

        call    SysMsgBoardStr

        pop     esi ebx

        ret     20

@@:

; 2. Fill user-provided parts of the request description.

        push    edi

        xchg    eax, ebx

        lea     esi, [.ReqBuilder+4]

        lea     edi, [ebx+request_queue_item.ReqBuilder]

        movsd   ; ReqBuilder

        movsd   ; Buffer

        movsd   ; Callback

        movsd   ; UserData

        pop     edi

; 3. Set stage to zero: not started.

        mov     [ebx+request_queue_item.Stage], 0

; 4. Lock the queue.

        mov     esi, [.device]

        lea     ecx, [esi+usb_device_data.QueueLock]

        call    MutexLock

; 5. Insert the request to the tail of the queue.

        add     esi, usb_device_data.RequestsQueue

        mov     edx, [esi+request_queue_item.Prev]

        mov     [ebx+request_queue_item.Next], esi

        mov     [ebx+request_queue_item.Prev], edx

        mov     [edx+request_queue_item.Next], ebx

        mov     [esi+request_queue_item.Prev], ebx

; 6. Test whether the queue was empty

; and the request should be started immediately.

        cmp     [esi+request_queue_item.Next], ebx

        jnz     .unlock

; 8. If the step 6 shows that the request is the first in the queue,

; start it.

        sub     esi, usb_device_data.RequestsQueue

        call    setup_request

        jmp     .nothing

.unlock:

        call    MutexUnlock

; 9. Return.

.nothing:

        pop     esi ebx

        ret     20

endp

; The current request is completed. Call the callback,

; remove the request from the queue, start the next

; request if there is one.

; esi points to usb_device_data

proc complete_request

; 1. Print common debug messages on fails.

if DEBUG

        cmp     [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL

        jb      .normal

        jz      .fail

        DEBUGF 1, 'K : Fatal error during execution of command %x\n', [esi+usb_device_data.Command.Command]:2

        jmp     .normal

.fail:

        DEBUGF 1, 'K : Command %x failed\n', [esi+usb_device_data.Command.Command]:2

.normal:

end if

; 2. Get the current request.

        mov     ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]

; 3. Call the callback.

        stdcall [ebx+request_queue_item.Callback], esi, [ebx+request_queue_item.UserData]

; 4. Lock the queue.

        lea     ecx, [esi+usb_device_data.QueueLock]

        call    MutexLock

; 5. Remove the request.

        lea     edx, [esi+usb_device_data.RequestsQueue]

        mov     eax, [ebx+request_queue_item.Next]

        mov     [eax+request_queue_item.Prev], edx

        mov     [edx+request_queue_item.Next], eax

; 6. Free the request memory.

        push    eax edx

        xchg    eax, ebx

        call    Kfree

        pop     edx ebx

; 7. If there is a next request, start processing.

        cmp     ebx, edx

        jnz     setup_request

; 8. Unlock the queue and return.

        lea     ecx, [esi+usb_device_data.QueueLock]

        call    MutexUnlock

        ret

endp

; Start processing the request. Called either by queue_request

; or when the previous request has been processed.

; Do not call directly, use queue_request.

; Must be called when queue is locked; unlocks the queue when returns.

proc setup_request

        xor     eax, eax

; 1. If DeviceDisconnected has been run, then all handles of pipes

; are invalid, so we must fail immediately.

; (That is why this function needs the locked queue: this

; guarantee that either DeviceDisconnected has been already run, or

; DeviceDisconnected will not return before the queue is unlocked.)

        cmp     [esi+usb_device_data.DeviceDisconnected], al

        jnz     .fatal

; 2. If the previous command has encountered a fatal error,

; perform reset recovery.

        cmp     [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL

        jb      .norecovery

; 2a. Send Bulk-Only Mass Storage Reset command to config pipe.

        lea     edx, [esi+usb_device_data.ConfigRequest]

        mov     word [edx], (REQUEST_BORESET shl 8) + 21h       ; class request

        mov     word [edx+6], ax        ; length = 0

        stdcall USBControlTransferAsync, [esi+usb_device_data.ConfigPipe], edx, eax, eax, recovery_callback1, esi, eax

; 2b. Fail here = fatal error.

        test    eax, eax

        jz      .fatal

; 2c. Otherwise, unlock the queue and return. recovery_callback1 will continue processing.

.unlock_return:

        lea     ecx, [esi+usb_device_data.QueueLock]

        call    MutexUnlock

        ret

.norecovery:

; 3. Send the command. Fail (no memory or device disconnected) = fatal error.

; Otherwise, go to 2c.

        call    request_stage1

        test    eax, eax

        jnz     .unlock_return

.fatal:

; 4. Fatal error. Set status = FATAL, unlock the queue, complete the request.

        mov     [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL

        lea     ecx, [esi+usb_device_data.QueueLock]

        call    MutexUnlock

        jmp     complete_request

endp

; Initiate USB transfer for the first stage of a request (send command).

proc request_stage1

        mov     ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]

; 1. Set the stage to 1 = command stage.

        inc     [ebx+request_queue_item.Stage]

; 2. Generate the command. Zero-initialize and use the caller-provided proc.

        lea     edx, [esi+usb_device_data.Command]

        xor     eax, eax

        mov     [edx+command_block_wrapper.CommandLength], 12

        mov     dword [edx+command_block_wrapper.Command], eax

        mov     dword [edx+command_block_wrapper.Command+4], eax

        mov     dword [edx+command_block_wrapper.Command+8], eax

        mov     dword [edx+command_block_wrapper.Command+12], eax

        inc     [edx+command_block_wrapper.Tag]

        stdcall [ebx+request_queue_item.ReqBuilder], edx, [ebx+request_queue_item.UserData]

; 4. Initiate USB transfer.

        lea     edx, [esi+usb_device_data.Command]

if DUMP_PACKETS

        DEBUGF 1,'K : USBSTOR out:'

        mov     eax, edx

        mov     ecx, command_block_wrapper.sizeof

        call    debug_dump

        DEBUGF 1,'\n'

end if

        stdcall USBNormalTransferAsync, [esi+usb_device_data.OutPipe], edx, command_block_wrapper.sizeof, request_callback1, esi, 0

        ret

endp

if DUMP_PACKETS

proc debug_dump

        test    ecx, ecx

        jz      .done

.loop:

        test    ecx, 0Fh

        jnz     @f

        DEBUGF 1,'\nK :'

@@:

        DEBUGF 1,' %x',[eax]:2

        inc     eax

        dec     ecx

        jnz     .loop

.done:

        ret

endp

end if

; Called when the Reset command is completed,

; either successfully or not.

proc recovery_callback1

virtual at esp

                dd      ?       ; return address

.pipe           dd      ?

.status         dd      ?

.buffer         dd      ?

.length         dd      ?

.calldata       dd      ?

end virtual

        cmp     [.status], 0

        jnz     .error

; todo: reset pipes

        push    ebx esi

        mov     esi, [.calldata+8]

        call    request_stage1

        pop     esi ebx

        test    eax, eax

        jz      .error

        ret     20

.error:

        DEBUGF 1, 'K : error %d while resetting', [.status]

        jmp     request_callback1.common_error

endp

; Called when the first stage of request is completed,

; either successfully or not.

proc request_callback1

virtual at esp

                dd      ?       ; return address

.pipe           dd      ?

.status         dd      ?

.buffer         dd      ?

.length         dd      ?

.calldata       dd      ?

end virtual

; 1. Initialize.

        mov     ecx, [.calldata]

        mov     eax, [.status]

; 2. Test for error.

        test    eax, eax

        jnz     .error

; No error.

; 3. Increment the stage.

        mov     edx, [ecx+usb_device_data.RequestsQueue+request_queue_item.Next]

        inc     [edx+request_queue_item.Stage]

; 4. If there is no data, skip this stage.

        cmp     [ecx+usb_device_data.Command.Length], 0

        jz      ..request_get_status

; 5. Initiate USB transfer. If this fails, go to the error handler.

        mov     eax, [ecx+usb_device_data.InPipe]

        cmp     [ecx+usb_device_data.Command.Flags], 0

        js      @f

        mov     eax, [ecx+usb_device_data.OutPipe]

if DUMP_PACKETS

        DEBUGF 1,'K : USBSTOR out:'

        push    eax ecx

        mov     eax, [edx+request_queue_item.Buffer]

        mov     ecx, [ecx+usb_device_data.Command.Length]

        call    debug_dump

        pop     ecx eax

        DEBUGF 1,'\n'

end if

@@:

        stdcall USBNormalTransferAsync, eax, [edx+request_queue_item.Buffer], [ecx+usb_device_data.Command.Length], request_callback2, ecx, 0

        test    eax, eax

        jz      .error

; 6. Return.

        ret     20

.error:

; Error.

; 7. Print debug message and complete the request as failed.

        DEBUGF 1,'K : error %d after %d bytes in request stage\n',eax,[.length]

.common_error:

; TODO: add recovery after STALL

        mov     ecx, [.calldata]

        mov     [ecx+usb_device_data.Status.Status], CSW_STATUS_FATAL

        push    ebx esi

        mov     esi, ecx

        call    complete_request

        pop     esi ebx

        ret     20

endp

; Called when the second stage of request is completed,

; either successfully or not.

proc request_callback2

virtual at esp

                dd      ?       ; return address

.pipe           dd      ?

.status         dd      ?

.buffer         dd      ?

.length         dd      ?

.calldata       dd      ?

end virtual

if DUMP_PACKETS

        mov     eax, [.calldata]

        mov     eax, [eax+usb_device_data.InPipe]

        cmp     [.pipe], eax

        jnz     @f

        DEBUGF 1,'K : USBSTOR in:'

        push    eax ecx

        mov     eax, [.buffer+8]

        mov     ecx, [.length+8]

        call    debug_dump

        pop     ecx eax

        DEBUGF 1,'\n'

@@:

end if

; 1. Initialize.

        mov     ecx, [.calldata]

        mov     eax, [.status]

; 2. Test for error.

        test    eax, eax

        jnz     .error

; No error.

..request_get_status:

; 3. Increment the stage.

        mov     edx, [ecx+usb_device_data.RequestsQueue+request_queue_item.Next]

        inc     [edx+request_queue_item.Stage]

; 4. Initiate USB transfer. If this fails, go to the error handler.

        lea     edx, [ecx+usb_device_data.Status]

        stdcall USBNormalTransferAsync, [ecx+usb_device_data.InPipe], edx, command_status_wrapper.sizeof, request_callback3, ecx, 0

        test    eax, eax

        jz      .error

        ret     20

.error:

; Error.

; 7. Print debug message and complete the request as failed.

        DEBUGF 1,'K : error %d after %d bytes in data stage\n',eax,[.length]

        jmp     request_callback1.common_error

endp

; Called when the third stage of request is completed,

; either successfully or not.

proc request_callback3

virtual at esp

                dd      ?       ; return address

.pipe           dd      ?

.status         dd      ?

.buffer         dd      ?

.length         dd      ?

.calldata       dd      ?

end virtual

if DUMP_PACKETS

        DEBUGF 1,'K : USBSTOR in:'

        mov     eax, [.buffer]

        mov     ecx, [.length]

        call    debug_dump

        DEBUGF 1,'\n'

end if

; 1. Initialize.

        mov     eax, [.status]

; 2. Test for error.

        test    eax, eax

        jnz     .transfer_error

; Transfer is OK.

; 3. Validate the status. Invalid status = fatal error.

        push    ebx esi

        mov     esi, [.calldata+8]

        mov     ebx, [esi+usb_device_data.RequestsQueue+request_queue_item.Next]

        cmp     [esi+usb_device_data.Status.Signature], 'USBS'

        jnz     .invalid

        mov     eax, [esi+usb_device_data.Command.Tag]

        cmp     [esi+usb_device_data.Status.Tag], eax

        jnz     .invalid

        cmp     [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL

        ja      .invalid

; 4. The status block is valid. Check the status code.

        jz      .complete

; 5. If this command was not REQUEST_SENSE, copy status data to safe place.

; Otherwise, the original command has failed, so restore the fail status.

        cmp     byte [esi+usb_device_data.Command.Command], SCSI_REQUEST_SENSE

        jz      .request_sense

        mov     eax, [esi+usb_device_data.Status.LengthRest]

        mov     [esi+usb_device_data.LengthRest], eax

        cmp     [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL

        jz      .fail

.complete:

        call    complete_request

.nothing:

        pop     esi ebx

        ret     20

.request_sense:

        mov     [esi+usb_device_data.Status.Status], CSW_STATUS_FAIL

        jmp     .complete

.invalid:

; 6. Invalid status block. Say error, set status to fatal and complete request.

        push    esi

        mov     esi, invresponse

        call    SysMsgBoardStr

        pop     esi

        mov     [esi+usb_device_data.Status.Status], CSW_STATUS_FATAL

        jmp     .complete

.fail:

; 7. The command has failed.

; If this command was not REQUEST_SENSE, schedule the REQUEST_SENSE command

; to determine the reason of fail. Otherwise, assume that there is no error data.

        cmp     [esi+usb_device_data.Command.Command], SCSI_REQUEST_SENSE

        jz      .fail_request_sense

        mov     [ebx+request_queue_item.ReqBuilder], request_sense_req

        lea     eax, [esi+usb_device_data.Sense]

        mov     [ebx+request_queue_item.Buffer], eax

        call    request_stage1

        test    eax, eax

        jnz     .nothing

.fail_request_sense:

        DEBUGF 1,'K : fail during REQUEST SENSE\n'

        mov     byte [esi+usb_device_data.Sense], 0

        jmp     .complete

.transfer_error:

; TODO: add recovery after STALL

        DEBUGF 1,'K : error %d after %d bytes in status stage\n',eax,[.length]

        jmp     request_callback1.common_error

endp

; Builder for SCSI_REQUEST_SENSE request.

; edx = first argument = pointer to usb_device_data.Command,

; second argument = custom data given to queue_request (ignored).

proc request_sense_req

        mov     [edx+command_block_wrapper.Length], sense_data.sizeof

        mov     [edx+command_block_wrapper.Flags], CBW_FLAG_IN

        mov     byte [edx+command_block_wrapper.Command+0], SCSI_REQUEST_SENSE

        mov     byte [edx+command_block_wrapper.Command+4], sense_data.sizeof

        ret     8

endp

; This procedure is called when new mass-storage device is detected.

; It initializes the device.

; Technically, initialization implies sending several USB queries,

; so it is split in several procedures. The first is AddDevice,

; other are callbacks which will be called at some time in the future,

; when the device will respond.

; The general scheme:

; * AddDevice parses descriptors, opens pipes; if everything is ok,

;   AddDevice sends REQUEST_GETMAXLUN with callback known_lun_callback;

; * known_lun_callback allocates memory for LogicalDevices and sends

;   SCSI_TEST_UNIT_READY to all logical devices with test_unit_ready_callback;

; * test_unit_ready_callback checks whether the unit is ready;

;   if not, it repeats the same request several times;

;   if ok or there were too many attempts, it sends SCSI_INQUIRY with

;   callback inquiry_callback;

; * inquiry_callback checks that a logical device is a block device

;   and the unit was ready; if so, it notifies the kernel about new disk device.

proc AddDevice

        push    ebx esi

virtual at esp

                rd      2       ; saved registers ebx, esi

                dd      ?       ; return address

.pipe0          dd      ?       ; handle of the config pipe

.config         dd      ?       ; pointer to config_descr

.interface      dd      ?       ; pointer to interface_descr

end virtual

; 1. Check device type. Currently only SCSI-command-set Bulk-only devices

; are supported.

; 1a. Get the subclass and the protocol. Since bInterfaceSubClass and

; bInterfaceProtocol are subsequent in interface_descr, just one

; memory reference is used for both.

        mov     esi, [.interface]

        xor     ebx, ebx

        mov     cx, word [esi+interface_descr.bInterfaceSubClass]

; 1b. For Mass-storage SCSI-command-set Bulk-only devices subclass must be 6

; and protocol must be 50h. Check.

        cmp     cx, 0x5006

        jz      .known

; There are devices with subclass 5 which use the same protocol 50h.

; The difference is not important for the code except for this test,

; so allow them to proceed also.

        cmp     cx, 0x5005

        jz      .known

; 1c. If the device is unknown, print a message and go to 11c.

        mov     esi, unkdevice

        call    SysMsgBoardStr

        jmp     .nothing

; 1d. If the device uses known command set, print a message and continue

; configuring.

.known:

        push    esi

        mov     esi, okdevice

        call    SysMsgBoardStr

        pop     esi

; 2. Allocate memory for internal device data.

; 2a. Call the kernel.

        mov     eax, usb_device_data.sizeof

        call    Kmalloc

; 2b. Check return value.

        test    eax, eax

        jnz     @f

; 2c. If failed, say a message and go to 11c.

        mov     esi, nomemory

        call    SysMsgBoardStr

        jmp     .nothing

@@:

; 2d. If succeeded, zero the contents and continue configuring.

        xchg    ebx, eax        ; ebx will point to usb_device_data

        xor     eax, eax

        mov     [ebx+usb_device_data.OutPipe], eax

        mov     [ebx+usb_device_data.InPipe], eax

        mov     [ebx+usb_device_data.MaxLUN], eax

        mov     [ebx+usb_device_data.LogicalDevices], eax

        mov     dword [ebx+usb_device_data.ConfigRequest], eax

        mov     dword [ebx+usb_device_data.ConfigRequest+4], eax

        mov     [ebx+usb_device_data.Status.Status], al

        mov     [ebx+usb_device_data.DeviceDisconnected], al

; 2e. There is one reference: a connected USB device.

        inc     eax

        mov     [ebx+usb_device_data.NumReferences], eax

; 2f. Save handle of configuration pipe for reset recovery.

        mov     eax, [.pipe0]

        mov     [ebx+usb_device_data.ConfigPipe], eax

; 2g. Save the interface number for configuration requests.

        mov     al, [esi+interface_descr.bInterfaceNumber]

        mov     [ebx+usb_device_data.ConfigRequest+4], al

; 2h. Initialize common fields in command wrapper.

        mov     [ebx+usb_device_data.Command.Signature], 'USBC'

        mov     [ebx+usb_device_data.Command.Tag], 'xxxx'

; 2i. Initialize requests queue.

        lea     eax, [ebx+usb_device_data.RequestsQueue]

        mov     [eax+request_queue_item.Next], eax

        mov     [eax+request_queue_item.Prev], eax

        lea     ecx, [ebx+usb_device_data.QueueLock]

        call    MutexInit

; Bulk-only mass storage devices use one OUT bulk endpoint for sending

; command/data and one IN bulk endpoint for receiving data/status.

; Look for those endpoints.

; 3. Get the upper bound of all descriptors' data.

        mov     edx, [.config]  ; configuration descriptor

        movzx   ecx, [edx+config_descr.wTotalLength]

        add     edx, ecx

; 4. Loop over all descriptors until

; either end-of-data reached - this is fail

; or interface descriptor found - this is fail, all further data

;    correspond to that interface

; or both endpoint descriptors found.

; 4a. Loop start: esi points to the interface descriptor,

.lookep:

; 4b. Get next descriptor.

        movzx   ecx, byte [esi] ; the first byte of all descriptors is length

        add     esi, ecx

; 4c. Check that at least two bytes are readable. The opposite is an error.

        inc     esi

        cmp     esi, edx

        jae     .errorep

        dec     esi

; 4d. Check that this descriptor is not interface descriptor. The opposite is

; an error.

        cmp     byte [esi+endpoint_descr.bDescriptorType], INTERFACE_DESCR_TYPE

        jz      .errorep

; 4e. Test whether this descriptor is an endpoint descriptor. If not, continue

; the loop.

        cmp     byte [esi+endpoint_descr.bDescriptorType], ENDPOINT_DESCR_TYPE

        jnz     .lookep

; 5. Check that the descriptor contains all required data and all data are

; readable. The opposite is an error.

        cmp     byte [esi+endpoint_descr.bLength], endpoint_descr.sizeof

        jb      .errorep

        lea     ecx, [esi+endpoint_descr.sizeof]

        cmp     ecx, edx

        ja      .errorep

; 6. Check that the endpoint is bulk endpoint. The opposite is an error.

        mov     cl, [esi+endpoint_descr.bmAttributes]

        and     cl, 3

        cmp     cl, BULK_PIPE

        jnz     .errorep

; 7. Get the direction of this endpoint.

        movzx   ecx, [esi+endpoint_descr.bEndpointAddress]

        shr     ecx, 7

; 8. Test whether a pipe for this direction is already opened. If so, continue

; the loop.

        cmp     [ebx+usb_device_data.OutPipe+ecx*4], 0

        jnz     .lookep

; 9. Open pipe for this endpoint.

; 9a. Save registers.

        push    ecx edx

; 9b. Load parameters from the descriptor.

        movzx   ecx, [esi+endpoint_descr.bEndpointAddress]

        movzx   edx, [esi+endpoint_descr.wMaxPacketSize]

        movzx   eax, [esi+endpoint_descr.bInterval]     ; not used for USB1, may be important for USB2

; 9c. Call the kernel.

        stdcall USBOpenPipe, [ebx+usb_device_data.ConfigPipe], ecx, edx, BULK_PIPE, eax

; 9d. Restore registers.

        pop     edx ecx

; 9e. Check result. If failed, go to 11b.

        test    eax, eax

        jz      .free

; 9f. Save result.

        mov     [ebx+usb_device_data.OutPipe+ecx*4], eax

; 10. Test whether the second pipe is already opened. If not, continue loop.

        xor     ecx, 1

        cmp     [ebx+usb_device_data.OutPipe+ecx*4], 0

        jz      .lookep

        jmp     .created

; 11. An error occured during processing endpoint descriptor.

.errorep:

; 11a. Print a message.

        DEBUGF 1,'K : error: invalid endpoint descriptor\n'

.free:

; 11b. Free the allocated usb_device_data.

        xchg    eax, ebx

        call    Kfree

.nothing:

; 11c. Return an error.

        xor     eax, eax

        jmp     .return

.created:

; 12. Pipes are opened. Send GetMaxLUN control request.

        lea     eax, [ebx+usb_device_data.ConfigRequest]

        mov     byte [eax], 0A1h        ; class request from interface

        mov     byte [eax+1], REQUEST_GETMAXLUN

        mov     byte [eax+6], 1         ; transfer 1 byte

        lea     ecx, [ebx+usb_device_data.MaxLUN]

if DUMP_PACKETS

        DEBUGF 1,'K : GETMAXLUN: %x %x %x %x %x %x %x %x\n',[eax]:2,[eax+1]:2,[eax+2]:2,[eax+3]:2,[eax+4]:2,[eax+5]:2,[eax+6]:2,[eax+7]:2

end if

        stdcall USBControlTransferAsync, [ebx+usb_device_data.ConfigPipe], eax, ecx, 1, known_lun_callback, ebx, 0

; 13. Return with pointer to device data as returned value.

        xchg    eax, ebx

.return:

        pop     esi ebx

        ret     12

endp

; This function is called when REQUEST_GETMAXLUN is done,

; either successful or unsuccessful.

proc known_lun_callback

        push    ebx esi

virtual at esp

                rd      2       ; saved registers

                dd      ?       ; return address

.pipe           dd      ?

.status         dd      ?

.buffer         dd      ?

.length         dd      ?

.calldata       dd      ?

end virtual

; 1. Check the status. If the request failed, assume that MaxLUN is zero.

        mov     ebx, [.calldata]

        mov     eax, [.status]

        test    eax, eax

        jz      @f

        DEBUGF 1, 'K : GETMAXLUN failed with status %d, assuming zero\n', eax

        mov     [ebx+usb_device_data.MaxLUN], 0

@@:

; 2. Allocate the memory for logical devices.

        mov     eax, [ebx+usb_device_data.MaxLUN]

        inc     eax

        DEBUGF 1,'K : %d logical unit(s)\n',eax

        imul    eax, usb_unit_data.sizeof

        push    ebx

        call    Kmalloc

        pop     ebx

; If failed, print a message and do nothing.

        test    eax, eax

        jnz     @f

        mov     esi, nomemory

        call    SysMsgBoardStr

        pop     esi ebx

        ret     20

@@:

        mov     [ebx+usb_device_data.LogicalDevices], eax

; 3. Initialize logical devices and initiate TEST_UNIT_READY request.

        xchg    esi, eax

        xor     ecx, ecx

.looplun:

        mov     [esi+usb_unit_data.Parent], ebx

        mov     [esi+usb_unit_data.LUN], cl

        xor     eax, eax

        mov     [esi+usb_unit_data.MediaPresent], al

        mov     [esi+usb_unit_data.DiskDevice], eax

        mov     [esi+usb_unit_data.SectorSize], eax

        mov     [esi+usb_unit_data.UnitReadyAttempts], eax

        push    ecx

        call    GetTimerTicks

        mov     [esi+usb_unit_data.TimerTicks], eax

        stdcall queue_request, ebx, test_unit_ready_req, 0, test_unit_ready_callback, esi

        pop     ecx

        inc     ecx

        add     esi, usb_unit_data.sizeof

        cmp     ecx, [ebx+usb_device_data.MaxLUN]

        jbe     .looplun

; 4. Return.

        pop     esi ebx

        ret     20

endp

; Builder for SCSI INQUIRY request.

; edx = first argument = pointer to usb_device_data.Command,

; second argument = custom data given to queue_request.

proc inquiry_req

        mov     eax, [esp+8]

        mov     al, [eax+usb_unit_data.LUN]

        mov     [edx+command_block_wrapper.Length], inquiry_data.sizeof

        mov     [edx+command_block_wrapper.Flags], CBW_FLAG_IN

        mov     [edx+command_block_wrapper.LUN], al

        mov     byte [edx+command_block_wrapper.Command+0], SCSI_INQUIRY

        mov     byte [edx+command_block_wrapper.Command+4], inquiry_data.sizeof

        ret     8

endp

; Called when SCSI INQUIRY request is completed.

proc inquiry_callback

; 1. Check the status.

        mov     ecx, [esp+4]

        cmp     [ecx+usb_device_data.Status.Status], CSW_STATUS_OK

        jnz     .fail

; 2. The command has completed successfully.

; Print a message showing device type, ignore anything but block devices.

        mov     al, [ecx+usb_device_data.InquiryData.PeripheralDevice]

        and     al, 1Fh

        DEBUGF 1,'K : peripheral device type is %x\n',al

        test    al, al

        jnz     .nothing

        DEBUGF 1,'K : direct-access mass storage device detected\n'

; 3. We have found a new disk device. Increment number of references.

        lock inc [ecx+usb_device_data.NumReferences]

; Unfortunately, we are now in the context of the USB thread,

; so we can't notify the kernel immediately: it would try to do something

; with a new disk, those actions would be synchronous and would require

; waiting for results of USB requests, but we need to exit this callback

; to allow the USB thread to continue working and handling those requests.

; 4. Thus, create a temporary kernel thread which would do it.

        mov     edx, [esp+8]

        push    ebx ecx

        movi    eax, 51

        movi    ebx, 1

        mov     ecx, new_disk_thread

        ; edx = parameter

        int     0x40

        pop     ecx ebx

        cmp     eax, -1

        jnz     .nothing

; on error, reverse step 3

        lock dec [ecx+usb_device_data.NumReferences]

.nothing:

        ret     8

.fail:

; 4. The command has failed. Print a message and do nothing.

        push    esi

        mov     esi, inquiry_fail

        call    SysMsgBoardStr

        pop     esi

        ret     8

endp

; Builder for SCSI TEST_UNIT_READY request.

; edx = first argument = pointer to usb_device_data.Command,

; second argument = custom data given to queue_request.

proc test_unit_ready_req

        mov     eax, [esp+8]

        mov     al, [eax+usb_unit_data.LUN]

        mov     [edx+command_block_wrapper.Length], 0

        mov     [edx+command_block_wrapper.Flags], CBW_FLAG_IN

        mov     [edx+command_block_wrapper.LUN], al

        ret     8

endp

; Called when SCSI TEST_UNIT_READY request is completed.

proc test_unit_ready_callback

virtual at esp

                dd      ?       ; return address

.device         dd      ?

.calldata       dd      ?

end virtual

; 1. Check the status.

        mov     ecx, [.device]

        mov     edx, [.calldata]

        cmp     [ecx+usb_device_data.Status.Status], CSW_STATUS_OK

        jnz     .fail

; 2. The command has completed successfully,

; possibly after some repetitions. Print a debug message showing

; number and time of those. Remember that media is ready and go to 4.

        DEBUGF 1,'K : media is ready\n'

        call    GetTimerTicks

        sub     eax, [edx+usb_unit_data.TimerTicks]

        DEBUGF 1,'K : %d attempts, %d ticks\n',[edx+usb_unit_data.UnitReadyAttempts],eax

        inc     [edx+usb_unit_data.MediaPresent]

        jmp     .inquiry

.fail:

; 3. The command has failed.

; Retry the same request up to 3 times with 10ms delay;

; if limit of retries is not reached, exit from the function.

; Otherwise, go to 4.

        inc     [edx+usb_unit_data.UnitReadyAttempts]

        cmp     [edx+usb_unit_data.UnitReadyAttempts], 3

        jz      @f

        push    ecx edx esi

        movi    esi, 10

        call    Sleep

        pop     esi edx ecx

        stdcall queue_request, ecx, test_unit_ready_req, 0, test_unit_ready_callback, edx

        ret     8

@@:

        DEBUGF 1,'K : media not ready\n'

.inquiry:

; 4. initiate INQUIRY request.

        lea     eax, [ecx+usb_device_data.InquiryData]

        stdcall queue_request, ecx, inquiry_req, eax, inquiry_callback, edx

        ret     8

endp

; Temporary thread for initial actions with a new disk device.

proc new_disk_thread

        sub     esp, 32

virtual at esp

.name   rb      32      ; device name

.param  dd      ?       ; contents of edx at the moment of int 0x40/eax=51

        dd      ?       ; stack segment

end virtual

; We are ready to notify the kernel about a new disk device.

        mov     esi, [.param]

; 1. Generate name.

; 1a. Find a free index.

        mov     ecx, free_numbers_lock

        call    MutexLock

        xor     eax, eax

@@:

        bsf     edx, [free_numbers+eax]

        jnz     @f

        add     eax, 4

        cmp     eax, 4*4

        jnz     @b

        call    MutexUnlock

        push    esi

        mov     esi, noindex

        call    SysMsgBoardStr

        pop     esi

        jmp     .drop_reference

@@:

; 1b. Mark the index as busy.

        btr     [free_numbers+eax], edx

        lea     eax, [eax*8+edx]

        push    eax

        call    MutexUnlock

        pop     eax

; 1c. Generate a name of the form "usbhd" in the stack.

        mov     dword [esp], 'usbh'

        lea     edi, [esp+5]

        mov     byte [edi-1], 'd'

        push    eax

        push    -'0'

        movi    ecx, 10

@@:

        cdq

        div     ecx

        push    edx

        test    eax, eax