Rev 5078 | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
1117 | serge | 1 | /* |
3031 | serge | 2 | * Copyright 2006-2007 Advanced Micro Devices, Inc. |
1117 | serge | 3 | * |
4 | * Permission is hereby granted, free of charge, to any person obtaining a |
||
5 | * copy of this software and associated documentation files (the "Software"), |
||
6 | * to deal in the Software without restriction, including without limitation |
||
7 | * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
||
8 | * and/or sell copies of the Software, and to permit persons to whom the |
||
9 | * Software is furnished to do so, subject to the following conditions: |
||
10 | * |
||
11 | * The above copyright notice and this permission notice shall be included in |
||
12 | * all copies or substantial portions of the Software. |
||
13 | * |
||
14 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||
15 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||
16 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
||
17 | * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
||
18 | * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
||
19 | * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
||
20 | * OTHER DEALINGS IN THE SOFTWARE. |
||
21 | */ |
||
22 | |||
1430 | serge | 23 | |
3031 | serge | 24 | /****************************************************************************/ |
1117 | serge | 25 | /*Portion I: Definitions shared between VBIOS and Driver */ |
26 | /****************************************************************************/ |
||
27 | |||
1430 | serge | 28 | |
1117 | serge | 29 | #ifndef _ATOMBIOS_H |
30 | #define _ATOMBIOS_H |
||
31 | |||
32 | #define ATOM_VERSION_MAJOR 0x00020000 |
||
33 | #define ATOM_VERSION_MINOR 0x00000002 |
||
34 | |||
35 | #define ATOM_HEADER_VERSION (ATOM_VERSION_MAJOR | ATOM_VERSION_MINOR) |
||
36 | |||
37 | /* Endianness should be specified before inclusion, |
||
38 | * default to little endian |
||
39 | */ |
||
40 | #ifndef ATOM_BIG_ENDIAN |
||
41 | #error Endian not specified |
||
42 | #endif |
||
43 | |||
44 | #ifdef _H2INC |
||
1430 | serge | 45 | #ifndef ULONG |
46 | typedef unsigned long ULONG; |
||
47 | #endif |
||
1117 | serge | 48 | |
1430 | serge | 49 | #ifndef UCHAR |
50 | typedef unsigned char UCHAR; |
||
51 | #endif |
||
1117 | serge | 52 | |
1430 | serge | 53 | #ifndef USHORT |
54 | typedef unsigned short USHORT; |
||
55 | #endif |
||
1117 | serge | 56 | #endif |
6104 | serge | 57 | |
58 | #define ATOM_DAC_A 0 |
||
1117 | serge | 59 | #define ATOM_DAC_B 1 |
60 | #define ATOM_EXT_DAC 2 |
||
61 | |||
62 | #define ATOM_CRTC1 0 |
||
63 | #define ATOM_CRTC2 1 |
||
1430 | serge | 64 | #define ATOM_CRTC3 2 |
65 | #define ATOM_CRTC4 3 |
||
66 | #define ATOM_CRTC5 4 |
||
67 | #define ATOM_CRTC6 5 |
||
68 | #define ATOM_CRTC_INVALID 0xFF |
||
1117 | serge | 69 | |
70 | #define ATOM_DIGA 0 |
||
71 | #define ATOM_DIGB 1 |
||
72 | |||
73 | #define ATOM_PPLL1 0 |
||
74 | #define ATOM_PPLL2 1 |
||
1430 | serge | 75 | #define ATOM_DCPLL 2 |
1963 | serge | 76 | #define ATOM_PPLL0 2 |
5078 | serge | 77 | #define ATOM_PPLL3 3 |
78 | |||
1963 | serge | 79 | #define ATOM_EXT_PLL1 8 |
80 | #define ATOM_EXT_PLL2 9 |
||
81 | #define ATOM_EXT_CLOCK 10 |
||
1430 | serge | 82 | #define ATOM_PPLL_INVALID 0xFF |
1117 | serge | 83 | |
1963 | serge | 84 | #define ENCODER_REFCLK_SRC_P1PLL 0 |
85 | #define ENCODER_REFCLK_SRC_P2PLL 1 |
||
86 | #define ENCODER_REFCLK_SRC_DCPLL 2 |
||
87 | #define ENCODER_REFCLK_SRC_EXTCLK 3 |
||
88 | #define ENCODER_REFCLK_SRC_INVALID 0xFF |
||
89 | |||
1117 | serge | 90 | #define ATOM_SCALER1 0 |
91 | #define ATOM_SCALER2 1 |
||
92 | |||
6104 | serge | 93 | #define ATOM_SCALER_DISABLE 0 |
94 | #define ATOM_SCALER_CENTER 1 |
||
95 | #define ATOM_SCALER_EXPANSION 2 |
||
96 | #define ATOM_SCALER_MULTI_EX 3 |
||
1117 | serge | 97 | |
98 | #define ATOM_DISABLE 0 |
||
99 | #define ATOM_ENABLE 1 |
||
100 | #define ATOM_LCD_BLOFF (ATOM_DISABLE+2) |
||
101 | #define ATOM_LCD_BLON (ATOM_ENABLE+2) |
||
102 | #define ATOM_LCD_BL_BRIGHTNESS_CONTROL (ATOM_ENABLE+3) |
||
103 | #define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5) |
||
104 | #define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5) |
||
105 | #define ATOM_ENCODER_INIT (ATOM_DISABLE+7) |
||
2997 | Serge | 106 | #define ATOM_INIT (ATOM_DISABLE+7) |
1430 | serge | 107 | #define ATOM_GET_STATUS (ATOM_DISABLE+8) |
1117 | serge | 108 | |
109 | #define ATOM_BLANKING 1 |
||
110 | #define ATOM_BLANKING_OFF 0 |
||
111 | |||
112 | #define ATOM_CURSOR1 0 |
||
113 | #define ATOM_CURSOR2 1 |
||
114 | |||
115 | #define ATOM_ICON1 0 |
||
116 | #define ATOM_ICON2 1 |
||
117 | |||
118 | #define ATOM_CRT1 0 |
||
119 | #define ATOM_CRT2 1 |
||
120 | |||
121 | #define ATOM_TV_NTSC 1 |
||
122 | #define ATOM_TV_NTSCJ 2 |
||
123 | #define ATOM_TV_PAL 3 |
||
124 | #define ATOM_TV_PALM 4 |
||
125 | #define ATOM_TV_PALCN 5 |
||
126 | #define ATOM_TV_PALN 6 |
||
127 | #define ATOM_TV_PAL60 7 |
||
128 | #define ATOM_TV_SECAM 8 |
||
129 | #define ATOM_TV_CV 16 |
||
130 | |||
131 | #define ATOM_DAC1_PS2 1 |
||
132 | #define ATOM_DAC1_CV 2 |
||
133 | #define ATOM_DAC1_NTSC 3 |
||
134 | #define ATOM_DAC1_PAL 4 |
||
135 | |||
136 | #define ATOM_DAC2_PS2 ATOM_DAC1_PS2 |
||
137 | #define ATOM_DAC2_CV ATOM_DAC1_CV |
||
138 | #define ATOM_DAC2_NTSC ATOM_DAC1_NTSC |
||
139 | #define ATOM_DAC2_PAL ATOM_DAC1_PAL |
||
6104 | serge | 140 | |
1117 | serge | 141 | #define ATOM_PM_ON 0 |
142 | #define ATOM_PM_STANDBY 1 |
||
143 | #define ATOM_PM_SUSPEND 2 |
||
144 | #define ATOM_PM_OFF 3 |
||
145 | |||
146 | /* Bit0:{=0:single, =1:dual}, |
||
147 | Bit1 {=0:666RGB, =1:888RGB}, |
||
148 | Bit2:3:{Grey level} |
||
149 | Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888}*/ |
||
150 | |||
151 | #define ATOM_PANEL_MISC_DUAL 0x00000001 |
||
152 | #define ATOM_PANEL_MISC_888RGB 0x00000002 |
||
153 | #define ATOM_PANEL_MISC_GREY_LEVEL 0x0000000C |
||
154 | #define ATOM_PANEL_MISC_FPDI 0x00000010 |
||
155 | #define ATOM_PANEL_MISC_GREY_LEVEL_SHIFT 2 |
||
156 | #define ATOM_PANEL_MISC_SPATIAL 0x00000020 |
||
157 | #define ATOM_PANEL_MISC_TEMPORAL 0x00000040 |
||
158 | #define ATOM_PANEL_MISC_API_ENABLED 0x00000080 |
||
159 | |||
1430 | serge | 160 | |
1117 | serge | 161 | #define MEMTYPE_DDR1 "DDR1" |
162 | #define MEMTYPE_DDR2 "DDR2" |
||
163 | #define MEMTYPE_DDR3 "DDR3" |
||
164 | #define MEMTYPE_DDR4 "DDR4" |
||
165 | |||
166 | #define ASIC_BUS_TYPE_PCI "PCI" |
||
167 | #define ASIC_BUS_TYPE_AGP "AGP" |
||
168 | #define ASIC_BUS_TYPE_PCIE "PCI_EXPRESS" |
||
169 | |||
170 | /* Maximum size of that FireGL flag string */ |
||
171 | |||
1430 | serge | 172 | #define ATOM_FIREGL_FLAG_STRING "FGL" //Flag used to enable FireGL Support |
173 | #define ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING 3 //sizeof( ATOM_FIREGL_FLAG_STRING ) |
||
1117 | serge | 174 | |
1430 | serge | 175 | #define ATOM_FAKE_DESKTOP_STRING "DSK" //Flag used to enable mobile ASIC on Desktop |
6104 | serge | 176 | #define ATOM_MAX_SIZE_OF_FAKE_DESKTOP_STRING ATOM_MAX_SIZE_OF_FIREGL_FLAG_STRING |
1117 | serge | 177 | |
1430 | serge | 178 | #define ATOM_M54T_FLAG_STRING "M54T" //Flag used to enable M54T Support |
179 | #define ATOM_MAX_SIZE_OF_M54T_FLAG_STRING 4 //sizeof( ATOM_M54T_FLAG_STRING ) |
||
1117 | serge | 180 | |
181 | #define HW_ASSISTED_I2C_STATUS_FAILURE 2 |
||
182 | #define HW_ASSISTED_I2C_STATUS_SUCCESS 1 |
||
183 | |||
6104 | serge | 184 | #pragma pack(1) /* BIOS data must use byte aligment */ |
1117 | serge | 185 | |
186 | /* Define offset to location of ROM header. */ |
||
187 | |||
188 | #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L |
||
189 | #define OFFSET_TO_ATOM_ROM_IMAGE_SIZE 0x00000002L |
||
190 | |||
191 | #define OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE 0x94 |
||
6104 | serge | 192 | #define MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE 20 /* including the terminator 0x0! */ |
1117 | serge | 193 | #define OFFSET_TO_GET_ATOMBIOS_STRINGS_NUMBER 0x002f |
194 | #define OFFSET_TO_GET_ATOMBIOS_STRINGS_START 0x006e |
||
195 | |||
196 | /* Common header for all ROM Data tables. |
||
6104 | serge | 197 | Every table pointed _ATOM_MASTER_DATA_TABLE has this common header. |
1117 | serge | 198 | And the pointer actually points to this header. */ |
199 | |||
1430 | serge | 200 | typedef struct _ATOM_COMMON_TABLE_HEADER |
201 | { |
||
6104 | serge | 202 | USHORT usStructureSize; |
203 | UCHAR ucTableFormatRevision; /*Change it when the Parser is not backward compatible */ |
||
204 | UCHAR ucTableContentRevision; /*Change it only when the table needs to change but the firmware */ |
||
205 | /*Image can't be updated, while Driver needs to carry the new table! */ |
||
1430 | serge | 206 | }ATOM_COMMON_TABLE_HEADER; |
1117 | serge | 207 | |
1963 | serge | 208 | /****************************************************************************/ |
209 | // Structure stores the ROM header. |
||
210 | /****************************************************************************/ |
||
1430 | serge | 211 | typedef struct _ATOM_ROM_HEADER |
212 | { |
||
6104 | serge | 213 | ATOM_COMMON_TABLE_HEADER sHeader; |
214 | UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios, |
||
215 | atombios should init it as "ATOM", don't change the position */ |
||
216 | USHORT usBiosRuntimeSegmentAddress; |
||
217 | USHORT usProtectedModeInfoOffset; |
||
218 | USHORT usConfigFilenameOffset; |
||
219 | USHORT usCRC_BlockOffset; |
||
220 | USHORT usBIOS_BootupMessageOffset; |
||
221 | USHORT usInt10Offset; |
||
222 | USHORT usPciBusDevInitCode; |
||
223 | USHORT usIoBaseAddress; |
||
224 | USHORT usSubsystemVendorID; |
||
225 | USHORT usSubsystemID; |
||
226 | USHORT usPCI_InfoOffset; |
||
227 | USHORT usMasterCommandTableOffset; /*Offset for SW to get all command table offsets, Don't change the position */ |
||
228 | USHORT usMasterDataTableOffset; /*Offset for SW to get all data table offsets, Don't change the position */ |
||
229 | UCHAR ucExtendedFunctionCode; |
||
230 | UCHAR ucReserved; |
||
1430 | serge | 231 | }ATOM_ROM_HEADER; |
1117 | serge | 232 | |
233 | /*==============================Command Table Portion==================================== */ |
||
234 | |||
235 | #ifdef UEFI_BUILD |
||
1430 | serge | 236 | #define UTEMP USHORT |
237 | #define USHORT void* |
||
1117 | serge | 238 | #endif |
239 | |||
1963 | serge | 240 | /****************************************************************************/ |
241 | // Structures used in Command.mtb |
||
242 | /****************************************************************************/ |
||
1430 | serge | 243 | typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ |
244 | USHORT ASIC_Init; //Function Table, used by various SW components,latest version 1.1 |
||
245 | USHORT GetDisplaySurfaceSize; //Atomic Table, Used by Bios when enabling HW ICON |
||
246 | USHORT ASIC_RegistersInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init |
||
247 | USHORT VRAM_BlockVenderDetection; //Atomic Table, used only by Bios |
||
248 | USHORT DIGxEncoderControl; //Only used by Bios |
||
249 | USHORT MemoryControllerInit; //Atomic Table, indirectly used by various SW components,called from ASIC_Init |
||
250 | USHORT EnableCRTCMemReq; //Function Table,directly used by various SW components,latest version 2.1 |
||
251 | USHORT MemoryParamAdjust; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock if needed |
||
252 | USHORT DVOEncoderControl; //Function Table,directly used by various SW components,latest version 1.2 |
||
253 | USHORT GPIOPinControl; //Atomic Table, only used by Bios |
||
254 | USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1 |
||
255 | USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1 |
||
256 | USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2 |
||
2997 | Serge | 257 | USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init |
1430 | serge | 258 | USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
259 | USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
||
2997 | Serge | 260 | USHORT MemoryPLLInit; //Atomic Table, used only by Bios |
261 | USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes. |
||
1430 | serge | 262 | USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
263 | USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios |
||
5078 | serge | 264 | USHORT SetUniphyInstance; //Atomic Table, only used by Bios |
1430 | serge | 265 | USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2 |
266 | USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3 |
||
2997 | Serge | 267 | USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1 |
1430 | serge | 268 | USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
269 | USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
270 | USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
271 | USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead |
||
2997 | Serge | 272 | USHORT GetConditionalGoldenSetting; //Only used by Bios |
1430 | serge | 273 | USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1 |
2997 | Serge | 274 | USHORT PatchMCSetting; //only used by BIOS |
275 | USHORT MC_SEQ_Control; //only used by BIOS |
||
5078 | serge | 276 | USHORT Gfx_Harvesting; //Atomic Table, Obsolete from Ry6xx, Now only used by BIOS for GFX harvesting |
1430 | serge | 277 | USHORT EnableScaler; //Atomic Table, used only by Bios |
278 | USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
279 | USHORT EnableCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
280 | USHORT GetPixelClock; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
281 | USHORT EnableVGA_Render; //Function Table,directly used by various SW components,latest version 1.1 |
||
282 | USHORT GetSCLKOverMCLKRatio; //Atomic Table, only used by Bios |
||
283 | USHORT SetCRTC_Timing; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
284 | USHORT SetCRTC_OverScan; //Atomic Table, used by various SW components,latest version 1.1 |
||
285 | USHORT SetCRTC_Replication; //Atomic Table, used only by Bios |
||
286 | USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
287 | USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios |
||
2997 | Serge | 288 | USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios |
1430 | serge | 289 | USHORT LUT_AutoFill; //Atomic Table, only used by Bios |
290 | USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios |
||
291 | USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
292 | USHORT GetEngineClock; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
293 | USHORT SetCRTC_UsingDTDTiming; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
294 | USHORT ExternalEncoderControl; //Atomic Table, directly used by various SW components,latest version 2.1 |
||
295 | USHORT LVTMAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
296 | USHORT VRAM_BlockDetectionByStrap; //Atomic Table, used only by Bios |
||
297 | USHORT MemoryCleanUp; //Atomic Table, only used by Bios |
||
298 | USHORT ProcessI2cChannelTransaction; //Function Table,only used by Bios |
||
299 | USHORT WriteOneByteToHWAssistedI2C; //Function Table,indirectly used by various SW components |
||
300 | USHORT ReadHWAssistedI2CStatus; //Atomic Table, indirectly used by various SW components |
||
301 | USHORT SpeedFanControl; //Function Table,indirectly used by various SW components,called from ASIC_Init |
||
302 | USHORT PowerConnectorDetection; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
303 | USHORT MC_Synchronization; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
||
304 | USHORT ComputeMemoryEnginePLL; //Atomic Table, indirectly used by various SW components,called from SetMemory/EngineClock |
||
305 | USHORT MemoryRefreshConversion; //Atomic Table, indirectly used by various SW components,called from SetMemory or SetEngineClock |
||
306 | USHORT VRAM_GetCurrentInfoBlock; //Atomic Table, used only by Bios |
||
307 | USHORT DynamicMemorySettings; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
||
308 | USHORT MemoryTraining; //Atomic Table, used only by Bios |
||
309 | USHORT EnableSpreadSpectrumOnPPLL; //Atomic Table, directly used by various SW components,latest version 1.2 |
||
310 | USHORT TMDSAOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
311 | USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1 |
||
312 | USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
313 | USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 |
||
2997 | Serge | 314 | USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" |
1430 | serge | 315 | USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init |
316 | USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock |
||
2997 | Serge | 317 | USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender |
1430 | serge | 318 | USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 |
319 | USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 |
||
320 | USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 |
||
321 | USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 |
||
322 | USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios |
||
323 | USHORT DPEncoderService; //Function Table,only used by Bios |
||
2997 | Serge | 324 | USHORT GetVoltageInfo; //Function Table,only used by Bios since SI |
1430 | serge | 325 | }ATOM_MASTER_LIST_OF_COMMAND_TABLES; |
1117 | serge | 326 | |
1430 | serge | 327 | // For backward compatible |
1117 | serge | 328 | #define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction |
2997 | Serge | 329 | #define DPTranslatorControl DIG2EncoderControl |
6104 | serge | 330 | #define UNIPHYTransmitterControl DIG1TransmitterControl |
331 | #define LVTMATransmitterControl DIG2TransmitterControl |
||
1117 | serge | 332 | #define SetCRTC_DPM_State GetConditionalGoldenSetting |
5078 | serge | 333 | #define ASIC_StaticPwrMgtStatusChange SetUniphyInstance |
1430 | serge | 334 | #define HPDInterruptService ReadHWAssistedI2CStatus |
335 | #define EnableVGA_Access GetSCLKOverMCLKRatio |
||
2997 | Serge | 336 | #define EnableYUV GetDispObjectInfo |
337 | #define DynamicClockGating EnableDispPowerGating |
||
338 | #define SetupHWAssistedI2CStatus ComputeMemoryClockParam |
||
1117 | serge | 339 | |
2997 | Serge | 340 | #define TMDSAEncoderControl PatchMCSetting |
341 | #define LVDSEncoderControl MC_SEQ_Control |
||
342 | #define LCD1OutputControl HW_Misc_Operation |
||
5078 | serge | 343 | #define TV1OutputControl Gfx_Harvesting |
2997 | Serge | 344 | |
1430 | serge | 345 | typedef struct _ATOM_MASTER_COMMAND_TABLE |
346 | { |
||
6104 | serge | 347 | ATOM_COMMON_TABLE_HEADER sHeader; |
348 | ATOM_MASTER_LIST_OF_COMMAND_TABLES ListOfCommandTables; |
||
1430 | serge | 349 | }ATOM_MASTER_COMMAND_TABLE; |
1117 | serge | 350 | |
6104 | serge | 351 | /****************************************************************************/ |
1430 | serge | 352 | // Structures used in every command table |
6104 | serge | 353 | /****************************************************************************/ |
1430 | serge | 354 | typedef struct _ATOM_TABLE_ATTRIBUTE |
355 | { |
||
1117 | serge | 356 | #if ATOM_BIG_ENDIAN |
1430 | serge | 357 | USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag |
358 | USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword), |
||
359 | USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword), |
||
1117 | serge | 360 | #else |
1430 | serge | 361 | USHORT WS_SizeInBytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword), |
362 | USHORT PS_SizeInBytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword), |
||
363 | USHORT UpdatedByUtility:1; //[15]=Table updated by utility flag |
||
1117 | serge | 364 | #endif |
1430 | serge | 365 | }ATOM_TABLE_ATTRIBUTE; |
1117 | serge | 366 | |
1430 | serge | 367 | typedef union _ATOM_TABLE_ATTRIBUTE_ACCESS |
368 | { |
||
6104 | serge | 369 | ATOM_TABLE_ATTRIBUTE sbfAccess; |
370 | USHORT susAccess; |
||
1430 | serge | 371 | }ATOM_TABLE_ATTRIBUTE_ACCESS; |
1117 | serge | 372 | |
6104 | serge | 373 | /****************************************************************************/ |
1430 | serge | 374 | // Common header for all command tables. |
375 | // Every table pointed by _ATOM_MASTER_COMMAND_TABLE has this common header. |
||
376 | // And the pointer actually points to this header. |
||
6104 | serge | 377 | /****************************************************************************/ |
1430 | serge | 378 | typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER |
379 | { |
||
6104 | serge | 380 | ATOM_COMMON_TABLE_HEADER CommonHeader; |
381 | ATOM_TABLE_ATTRIBUTE TableAttribute; |
||
1430 | serge | 382 | }ATOM_COMMON_ROM_COMMAND_TABLE_HEADER; |
1117 | serge | 383 | |
6104 | serge | 384 | /****************************************************************************/ |
1430 | serge | 385 | // Structures used by ComputeMemoryEnginePLLTable |
6104 | serge | 386 | /****************************************************************************/ |
1117 | serge | 387 | #define COMPUTE_MEMORY_PLL_PARAM 1 |
388 | #define COMPUTE_ENGINE_PLL_PARAM 2 |
||
1963 | serge | 389 | #define ADJUST_MC_SETTING_PARAM 3 |
1117 | serge | 390 | |
1963 | serge | 391 | /****************************************************************************/ |
392 | // Structures used by AdjustMemoryControllerTable |
||
393 | /****************************************************************************/ |
||
394 | typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ |
||
395 | { |
||
396 | #if ATOM_BIG_ENDIAN |
||
397 | ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block |
||
398 | ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] |
||
399 | ULONG ulClockFreq:24; |
||
400 | #else |
||
401 | ULONG ulClockFreq:24; |
||
402 | ULONG ulMemoryModuleNumber:7; // BYTE_3[6:0] |
||
403 | ULONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block |
||
404 | #endif |
||
405 | }ATOM_ADJUST_MEMORY_CLOCK_FREQ; |
||
406 | #define POINTER_RETURN_FLAG 0x80 |
||
407 | |||
1430 | serge | 408 | typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS |
409 | { |
||
410 | ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Div and ref_div |
||
411 | UCHAR ucAction; //0:reserved //1:Memory //2:Engine |
||
412 | UCHAR ucReserved; //may expand to return larger Fbdiv later |
||
413 | UCHAR ucFbDiv; //return value |
||
414 | UCHAR ucPostDiv; //return value |
||
415 | }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS; |
||
1117 | serge | 416 | |
1430 | serge | 417 | typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2 |
418 | { |
||
419 | ULONG ulClock; //When return, [23:0] return real clock |
||
420 | UCHAR ucAction; //0:reserved;COMPUTE_MEMORY_PLL_PARAM:Memory;COMPUTE_ENGINE_PLL_PARAM:Engine. it return ref_div to be written to register |
||
421 | USHORT usFbDiv; //return Feedback value to be written to register |
||
422 | UCHAR ucPostDiv; //return post div to be written to register |
||
423 | }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V2; |
||
1117 | serge | 424 | #define COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS |
425 | |||
1430 | serge | 426 | |
427 | #define SET_CLOCK_FREQ_MASK 0x00FFFFFF //Clock change tables only take bit [23:0] as the requested clock value |
||
428 | #define USE_NON_BUS_CLOCK_MASK 0x01000000 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) |
||
429 | #define USE_MEMORY_SELF_REFRESH_MASK 0x02000000 //Only applicable to memory clock change, when set, using memory self refresh during clock transition |
||
430 | #define SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04000000 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change |
||
431 | #define FIRST_TIME_CHANGE_CLOCK 0x08000000 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup |
||
432 | #define SKIP_SW_PROGRAM_PLL 0x10000000 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL |
||
1117 | serge | 433 | #define USE_SS_ENABLED_PIXEL_CLOCK USE_NON_BUS_CLOCK_MASK |
434 | |||
1430 | serge | 435 | #define b3USE_NON_BUS_CLOCK_MASK 0x01 //Applicable to both memory and engine clock change, when set, it uses another clock as the temporary clock (engine uses memory and vice versa) |
436 | #define b3USE_MEMORY_SELF_REFRESH 0x02 //Only applicable to memory clock change, when set, using memory self refresh during clock transition |
||
437 | #define b3SKIP_INTERNAL_MEMORY_PARAMETER_CHANGE 0x04 //Only applicable to memory clock change, when set, the table will skip predefined internal memory parameter change |
||
438 | #define b3FIRST_TIME_CHANGE_CLOCK 0x08 //Applicable to both memory and engine clock change,when set, it means this is 1st time to change clock after ASIC bootup |
||
439 | #define b3SKIP_SW_PROGRAM_PLL 0x10 //Applicable to both memory and engine clock change, when set, it means the table will not program SPLL/MPLL |
||
1117 | serge | 440 | |
1430 | serge | 441 | typedef struct _ATOM_COMPUTE_CLOCK_FREQ |
442 | { |
||
1117 | serge | 443 | #if ATOM_BIG_ENDIAN |
1430 | serge | 444 | ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM |
445 | ULONG ulClockFreq:24; // in unit of 10kHz |
||
1117 | serge | 446 | #else |
1430 | serge | 447 | ULONG ulClockFreq:24; // in unit of 10kHz |
448 | ULONG ulComputeClockFlag:8; // =1: COMPUTE_MEMORY_PLL_PARAM, =2: COMPUTE_ENGINE_PLL_PARAM |
||
1117 | serge | 449 | #endif |
1430 | serge | 450 | }ATOM_COMPUTE_CLOCK_FREQ; |
1117 | serge | 451 | |
1430 | serge | 452 | typedef struct _ATOM_S_MPLL_FB_DIVIDER |
453 | { |
||
6104 | serge | 454 | USHORT usFbDivFrac; |
455 | USHORT usFbDiv; |
||
1430 | serge | 456 | }ATOM_S_MPLL_FB_DIVIDER; |
1117 | serge | 457 | |
1430 | serge | 458 | typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3 |
459 | { |
||
460 | union |
||
461 | { |
||
462 | ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter |
||
3764 | Serge | 463 | ULONG ulClockParams; //ULONG access for BE |
1430 | serge | 464 | ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter |
6104 | serge | 465 | }; |
1430 | serge | 466 | UCHAR ucRefDiv; //Output Parameter |
467 | UCHAR ucPostDiv; //Output Parameter |
||
468 | UCHAR ucCntlFlag; //Output Parameter |
||
6104 | serge | 469 | UCHAR ucReserved; |
1430 | serge | 470 | }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V3; |
1117 | serge | 471 | |
1430 | serge | 472 | // ucCntlFlag |
1117 | serge | 473 | #define ATOM_PLL_CNTL_FLAG_PLL_POST_DIV_EN 1 |
474 | #define ATOM_PLL_CNTL_FLAG_MPLL_VCO_MODE 2 |
||
475 | #define ATOM_PLL_CNTL_FLAG_FRACTION_DISABLE 4 |
||
1430 | serge | 476 | #define ATOM_PLL_CNTL_FLAG_SPLL_ISPARE_9 8 |
1117 | serge | 477 | |
1430 | serge | 478 | |
479 | // V4 are only used for APU which PLL outside GPU |
||
480 | typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 |
||
481 | { |
||
482 | #if ATOM_BIG_ENDIAN |
||
5078 | serge | 483 | ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly |
1430 | serge | 484 | ULONG ulClock:24; //Input= target clock, output = actual clock |
485 | #else |
||
486 | ULONG ulClock:24; //Input= target clock, output = actual clock |
||
5078 | serge | 487 | ULONG ucPostDiv:8; //return parameter: post divider which is used to program to register directly |
1430 | serge | 488 | #endif |
489 | }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4; |
||
490 | |||
1963 | serge | 491 | typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 |
492 | { |
||
493 | union |
||
494 | { |
||
495 | ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter |
||
3764 | Serge | 496 | ULONG ulClockParams; //ULONG access for BE |
1963 | serge | 497 | ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter |
498 | }; |
||
499 | UCHAR ucRefDiv; //Output Parameter |
||
500 | UCHAR ucPostDiv; //Output Parameter |
||
501 | union |
||
502 | { |
||
503 | UCHAR ucCntlFlag; //Output Flags |
||
504 | UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode |
||
505 | }; |
||
506 | UCHAR ucReserved; |
||
507 | }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5; |
||
508 | |||
5078 | serge | 509 | |
510 | typedef struct _COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6 |
||
511 | { |
||
512 | ATOM_COMPUTE_CLOCK_FREQ ulClock; //Input Parameter |
||
513 | ULONG ulReserved[2]; |
||
514 | }COMPUTE_GPU_CLOCK_INPUT_PARAMETERS_V1_6; |
||
515 | |||
516 | //ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag |
||
517 | #define COMPUTE_GPUCLK_INPUT_FLAG_CLK_TYPE_MASK 0x0f |
||
518 | #define COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK 0x00 |
||
519 | #define COMPUTE_GPUCLK_INPUT_FLAG_SCLK 0x01 |
||
520 | |||
521 | typedef struct _COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6 |
||
522 | { |
||
523 | COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4 ulClock; //Output Parameter: ucPostDiv=DFS divider |
||
524 | ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output Parameter: PLL FB divider |
||
525 | UCHAR ucPllRefDiv; //Output Parameter: PLL ref divider |
||
526 | UCHAR ucPllPostDiv; //Output Parameter: PLL post divider |
||
527 | UCHAR ucPllCntlFlag; //Output Flags: control flag |
||
528 | UCHAR ucReserved; |
||
529 | }COMPUTE_GPU_CLOCK_OUTPUT_PARAMETERS_V1_6; |
||
530 | |||
531 | //ucPllCntlFlag |
||
532 | #define SPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 |
||
533 | |||
534 | |||
1963 | serge | 535 | // ucInputFlag |
536 | #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode |
||
537 | |||
2997 | Serge | 538 | // use for ComputeMemoryClockParamTable |
539 | typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1 |
||
540 | { |
||
541 | union |
||
542 | { |
||
543 | ULONG ulClock; |
||
544 | ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS) |
||
545 | }; |
||
546 | UCHAR ucDllSpeed; //Output |
||
547 | UCHAR ucPostDiv; //Output |
||
548 | union{ |
||
549 | UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode |
||
550 | UCHAR ucPllCntlFlag; //Output: |
||
551 | }; |
||
552 | UCHAR ucBWCntl; |
||
553 | }COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1; |
||
554 | |||
555 | // definition of ucInputFlag |
||
556 | #define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01 |
||
557 | // definition of ucPllCntlFlag |
||
558 | #define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 |
||
559 | #define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04 |
||
560 | #define MPLL_CNTL_FLAG_QDR_ENABLE 0x08 |
||
561 | #define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10 |
||
562 | |||
563 | //MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL |
||
564 | #define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04 |
||
565 | |||
1430 | serge | 566 | typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER |
567 | { |
||
6104 | serge | 568 | ATOM_COMPUTE_CLOCK_FREQ ulClock; |
569 | ULONG ulReserved[2]; |
||
1430 | serge | 570 | }DYNAMICE_MEMORY_SETTINGS_PARAMETER; |
1117 | serge | 571 | |
1430 | serge | 572 | typedef struct _DYNAMICE_ENGINE_SETTINGS_PARAMETER |
573 | { |
||
6104 | serge | 574 | ATOM_COMPUTE_CLOCK_FREQ ulClock; |
575 | ULONG ulMemoryClock; |
||
576 | ULONG ulReserved; |
||
1430 | serge | 577 | }DYNAMICE_ENGINE_SETTINGS_PARAMETER; |
1117 | serge | 578 | |
6104 | serge | 579 | /****************************************************************************/ |
1430 | serge | 580 | // Structures used by SetEngineClockTable |
6104 | serge | 581 | /****************************************************************************/ |
1430 | serge | 582 | typedef struct _SET_ENGINE_CLOCK_PARAMETERS |
583 | { |
||
584 | ULONG ulTargetEngineClock; //In 10Khz unit |
||
585 | }SET_ENGINE_CLOCK_PARAMETERS; |
||
1117 | serge | 586 | |
1430 | serge | 587 | typedef struct _SET_ENGINE_CLOCK_PS_ALLOCATION |
588 | { |
||
589 | ULONG ulTargetEngineClock; //In 10Khz unit |
||
6104 | serge | 590 | COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; |
1430 | serge | 591 | }SET_ENGINE_CLOCK_PS_ALLOCATION; |
1117 | serge | 592 | |
6104 | serge | 593 | /****************************************************************************/ |
1430 | serge | 594 | // Structures used by SetMemoryClockTable |
6104 | serge | 595 | /****************************************************************************/ |
1430 | serge | 596 | typedef struct _SET_MEMORY_CLOCK_PARAMETERS |
597 | { |
||
598 | ULONG ulTargetMemoryClock; //In 10Khz unit |
||
599 | }SET_MEMORY_CLOCK_PARAMETERS; |
||
1117 | serge | 600 | |
1430 | serge | 601 | typedef struct _SET_MEMORY_CLOCK_PS_ALLOCATION |
602 | { |
||
603 | ULONG ulTargetMemoryClock; //In 10Khz unit |
||
6104 | serge | 604 | COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_PS_ALLOCATION sReserved; |
1430 | serge | 605 | }SET_MEMORY_CLOCK_PS_ALLOCATION; |
1117 | serge | 606 | |
6104 | serge | 607 | /****************************************************************************/ |
1430 | serge | 608 | // Structures used by ASIC_Init.ctb |
6104 | serge | 609 | /****************************************************************************/ |
1430 | serge | 610 | typedef struct _ASIC_INIT_PARAMETERS |
611 | { |
||
612 | ULONG ulDefaultEngineClock; //In 10Khz unit |
||
613 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
614 | }ASIC_INIT_PARAMETERS; |
||
1117 | serge | 615 | |
1430 | serge | 616 | typedef struct _ASIC_INIT_PS_ALLOCATION |
617 | { |
||
6104 | serge | 618 | ASIC_INIT_PARAMETERS sASICInitClocks; |
1430 | serge | 619 | SET_ENGINE_CLOCK_PS_ALLOCATION sReserved; //Caller doesn't need to init this structure |
620 | }ASIC_INIT_PS_ALLOCATION; |
||
1117 | serge | 621 | |
6104 | serge | 622 | /****************************************************************************/ |
1430 | serge | 623 | // Structure used by DynamicClockGatingTable.ctb |
6104 | serge | 624 | /****************************************************************************/ |
1430 | serge | 625 | typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS |
626 | { |
||
627 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 628 | UCHAR ucPadding[3]; |
1430 | serge | 629 | }DYNAMIC_CLOCK_GATING_PARAMETERS; |
1117 | serge | 630 | #define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS |
631 | |||
6104 | serge | 632 | /****************************************************************************/ |
2997 | Serge | 633 | // Structure used by EnableDispPowerGatingTable.ctb |
634 | /****************************************************************************/ |
||
635 | typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 |
||
636 | { |
||
637 | UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ... |
||
638 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
639 | UCHAR ucPadding[2]; |
||
640 | }ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1; |
||
641 | |||
642 | /****************************************************************************/ |
||
1430 | serge | 643 | // Structure used by EnableASIC_StaticPwrMgtTable.ctb |
6104 | serge | 644 | /****************************************************************************/ |
1430 | serge | 645 | typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS |
646 | { |
||
647 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 648 | UCHAR ucPadding[3]; |
1430 | serge | 649 | }ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS; |
1117 | serge | 650 | #define ENABLE_ASIC_STATIC_PWR_MGT_PS_ALLOCATION ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS |
651 | |||
6104 | serge | 652 | /****************************************************************************/ |
1430 | serge | 653 | // Structures used by DAC_LoadDetectionTable.ctb |
6104 | serge | 654 | /****************************************************************************/ |
1430 | serge | 655 | typedef struct _DAC_LOAD_DETECTION_PARAMETERS |
656 | { |
||
657 | USHORT usDeviceID; //{ATOM_DEVICE_CRTx_SUPPORT,ATOM_DEVICE_TVx_SUPPORT,ATOM_DEVICE_CVx_SUPPORT} |
||
658 | UCHAR ucDacType; //{ATOM_DAC_A,ATOM_DAC_B, ATOM_EXT_DAC} |
||
659 | UCHAR ucMisc; //Valid only when table revision =1.3 and above |
||
660 | }DAC_LOAD_DETECTION_PARAMETERS; |
||
1117 | serge | 661 | |
1430 | serge | 662 | // DAC_LOAD_DETECTION_PARAMETERS.ucMisc |
1117 | serge | 663 | #define DAC_LOAD_MISC_YPrPb 0x01 |
664 | |||
1430 | serge | 665 | typedef struct _DAC_LOAD_DETECTION_PS_ALLOCATION |
666 | { |
||
6104 | serge | 667 | DAC_LOAD_DETECTION_PARAMETERS sDacload; |
1430 | serge | 668 | ULONG Reserved[2];// Don't set this one, allocation for EXT DAC |
669 | }DAC_LOAD_DETECTION_PS_ALLOCATION; |
||
1117 | serge | 670 | |
6104 | serge | 671 | /****************************************************************************/ |
1430 | serge | 672 | // Structures used by DAC1EncoderControlTable.ctb and DAC2EncoderControlTable.ctb |
6104 | serge | 673 | /****************************************************************************/ |
1430 | serge | 674 | typedef struct _DAC_ENCODER_CONTROL_PARAMETERS |
675 | { |
||
676 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
677 | UCHAR ucDacStandard; // See definition of ATOM_DACx_xxx, For DEC3.0, bit 7 used as internal flag to indicate DAC2 (==1) or DAC1 (==0) |
||
678 | UCHAR ucAction; // 0: turn off encoder |
||
679 | // 1: setup and turn on encoder |
||
680 | // 7: ATOM_ENCODER_INIT Initialize DAC |
||
681 | }DAC_ENCODER_CONTROL_PARAMETERS; |
||
1117 | serge | 682 | |
683 | #define DAC_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PARAMETERS |
||
684 | |||
6104 | serge | 685 | /****************************************************************************/ |
1430 | serge | 686 | // Structures used by DIG1EncoderControlTable |
687 | // DIG2EncoderControlTable |
||
688 | // ExternalEncoderControlTable |
||
6104 | serge | 689 | /****************************************************************************/ |
1430 | serge | 690 | typedef struct _DIG_ENCODER_CONTROL_PARAMETERS |
691 | { |
||
692 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
6104 | serge | 693 | UCHAR ucConfig; |
1430 | serge | 694 | // [2] Link Select: |
695 | // =0: PHY linkA if bfLane<3 |
||
696 | // =1: PHY linkB if bfLanes<3 |
||
697 | // =0: PHY linkA+B if bfLanes=3 |
||
698 | // [3] Transmitter Sel |
||
699 | // =0: UNIPHY or PCIEPHY |
||
700 | // =1: LVTMA |
||
701 | UCHAR ucAction; // =0: turn off encoder |
||
702 | // =1: turn on encoder |
||
6104 | serge | 703 | UCHAR ucEncoderMode; |
1430 | serge | 704 | // =0: DP encoder |
705 | // =1: LVDS encoder |
||
706 | // =2: DVI encoder |
||
707 | // =3: HDMI encoder |
||
708 | // =4: SDVO encoder |
||
709 | UCHAR ucLaneNum; // how many lanes to enable |
||
6104 | serge | 710 | UCHAR ucReserved[2]; |
1430 | serge | 711 | }DIG_ENCODER_CONTROL_PARAMETERS; |
1117 | serge | 712 | #define DIG_ENCODER_CONTROL_PS_ALLOCATION DIG_ENCODER_CONTROL_PARAMETERS |
713 | #define EXTERNAL_ENCODER_CONTROL_PARAMETER DIG_ENCODER_CONTROL_PARAMETERS |
||
714 | |||
1430 | serge | 715 | //ucConfig |
1117 | serge | 716 | #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK 0x01 |
717 | #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ 0x00 |
||
718 | #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ 0x01 |
||
1963 | serge | 719 | #define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ 0x02 |
1117 | serge | 720 | #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK 0x04 |
721 | #define ATOM_ENCODER_CONFIG_LINKA 0x00 |
||
722 | #define ATOM_ENCODER_CONFIG_LINKB 0x04 |
||
723 | #define ATOM_ENCODER_CONFIG_LINKA_B ATOM_TRANSMITTER_CONFIG_LINKA |
||
724 | #define ATOM_ENCODER_CONFIG_LINKB_A ATOM_ENCODER_CONFIG_LINKB |
||
725 | #define ATOM_ENCODER_CONFIG_TRANSMITTER_SEL_MASK 0x08 |
||
726 | #define ATOM_ENCODER_CONFIG_UNIPHY 0x00 |
||
727 | #define ATOM_ENCODER_CONFIG_LVTMA 0x08 |
||
728 | #define ATOM_ENCODER_CONFIG_TRANSMITTER1 0x00 |
||
729 | #define ATOM_ENCODER_CONFIG_TRANSMITTER2 0x08 |
||
1430 | serge | 730 | #define ATOM_ENCODER_CONFIG_DIGB 0x80 // VBIOS Internal use, outside SW should set this bit=0 |
731 | // ucAction |
||
732 | // ATOM_ENABLE: Enable Encoder |
||
733 | // ATOM_DISABLE: Disable Encoder |
||
1117 | serge | 734 | |
1430 | serge | 735 | //ucEncoderMode |
1117 | serge | 736 | #define ATOM_ENCODER_MODE_DP 0 |
737 | #define ATOM_ENCODER_MODE_LVDS 1 |
||
738 | #define ATOM_ENCODER_MODE_DVI 2 |
||
739 | #define ATOM_ENCODER_MODE_HDMI 3 |
||
740 | #define ATOM_ENCODER_MODE_SDVO 4 |
||
1430 | serge | 741 | #define ATOM_ENCODER_MODE_DP_AUDIO 5 |
1117 | serge | 742 | #define ATOM_ENCODER_MODE_TV 13 |
743 | #define ATOM_ENCODER_MODE_CV 14 |
||
744 | #define ATOM_ENCODER_MODE_CRT 15 |
||
1963 | serge | 745 | #define ATOM_ENCODER_MODE_DVO 16 |
746 | #define ATOM_ENCODER_MODE_DP_SST ATOM_ENCODER_MODE_DP // For DP1.2 |
||
747 | #define ATOM_ENCODER_MODE_DP_MST 5 // For DP1.2 |
||
1117 | serge | 748 | |
1430 | serge | 749 | typedef struct _ATOM_DIG_ENCODER_CONFIG_V2 |
750 | { |
||
1117 | serge | 751 | #if ATOM_BIG_ENDIAN |
6104 | serge | 752 | UCHAR ucReserved1:2; |
1430 | serge | 753 | UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF |
754 | UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F |
||
6104 | serge | 755 | UCHAR ucReserved:1; |
1430 | serge | 756 | UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz |
1117 | serge | 757 | #else |
1430 | serge | 758 | UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz |
6104 | serge | 759 | UCHAR ucReserved:1; |
1430 | serge | 760 | UCHAR ucLinkSel:1; // =0: linkA/C/E =1: linkB/D/F |
761 | UCHAR ucTransmitterSel:2; // =0: UniphyAB, =1: UniphyCD =2: UniphyEF |
||
6104 | serge | 762 | UCHAR ucReserved1:2; |
1117 | serge | 763 | #endif |
1430 | serge | 764 | }ATOM_DIG_ENCODER_CONFIG_V2; |
1117 | serge | 765 | |
1430 | serge | 766 | |
767 | typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2 |
||
768 | { |
||
769 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
6104 | serge | 770 | ATOM_DIG_ENCODER_CONFIG_V2 acConfig; |
771 | UCHAR ucAction; |
||
772 | UCHAR ucEncoderMode; |
||
1430 | serge | 773 | // =0: DP encoder |
774 | // =1: LVDS encoder |
||
775 | // =2: DVI encoder |
||
776 | // =3: HDMI encoder |
||
777 | // =4: SDVO encoder |
||
778 | UCHAR ucLaneNum; // how many lanes to enable |
||
779 | UCHAR ucStatus; // = DP_LINK_TRAINING_COMPLETE or DP_LINK_TRAINING_INCOMPLETE, only used by VBIOS with command ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS |
||
780 | UCHAR ucReserved; |
||
781 | }DIG_ENCODER_CONTROL_PARAMETERS_V2; |
||
1117 | serge | 782 | |
1430 | serge | 783 | //ucConfig |
1117 | serge | 784 | #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_MASK 0x01 |
785 | #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_1_62GHZ 0x00 |
||
786 | #define ATOM_ENCODER_CONFIG_V2_DPLINKRATE_2_70GHZ 0x01 |
||
787 | #define ATOM_ENCODER_CONFIG_V2_LINK_SEL_MASK 0x04 |
||
788 | #define ATOM_ENCODER_CONFIG_V2_LINKA 0x00 |
||
789 | #define ATOM_ENCODER_CONFIG_V2_LINKB 0x04 |
||
790 | #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER_SEL_MASK 0x18 |
||
791 | #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER1 0x00 |
||
792 | #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER2 0x08 |
||
793 | #define ATOM_ENCODER_CONFIG_V2_TRANSMITTER3 0x10 |
||
794 | |||
1430 | serge | 795 | // ucAction: |
796 | // ATOM_DISABLE |
||
797 | // ATOM_ENABLE |
||
798 | #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START 0x08 |
||
799 | #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 0x09 |
||
800 | #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 0x0a |
||
1963 | serge | 801 | #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 0x13 |
1430 | serge | 802 | #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE 0x0b |
803 | #define ATOM_ENCODER_CMD_DP_VIDEO_OFF 0x0c |
||
804 | #define ATOM_ENCODER_CMD_DP_VIDEO_ON 0x0d |
||
805 | #define ATOM_ENCODER_CMD_QUERY_DP_LINK_TRAINING_STATUS 0x0e |
||
806 | #define ATOM_ENCODER_CMD_SETUP 0x0f |
||
1963 | serge | 807 | #define ATOM_ENCODER_CMD_SETUP_PANEL_MODE 0x10 |
1430 | serge | 808 | |
809 | // ucStatus |
||
810 | #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE 0x10 |
||
811 | #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE 0x00 |
||
812 | |||
1963 | serge | 813 | //ucTableFormatRevision=1 |
814 | //ucTableContentRevision=3 |
||
1430 | serge | 815 | // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver |
816 | typedef struct _ATOM_DIG_ENCODER_CONFIG_V3 |
||
817 | { |
||
818 | #if ATOM_BIG_ENDIAN |
||
819 | UCHAR ucReserved1:1; |
||
1963 | serge | 820 | UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) |
1430 | serge | 821 | UCHAR ucReserved:3; |
822 | UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz |
||
823 | #else |
||
824 | UCHAR ucDPLinkRate:1; // =0: 1.62Ghz, =1: 2.7Ghz |
||
825 | UCHAR ucReserved:3; |
||
1963 | serge | 826 | UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) |
1430 | serge | 827 | UCHAR ucReserved1:1; |
828 | #endif |
||
829 | }ATOM_DIG_ENCODER_CONFIG_V3; |
||
830 | |||
1963 | serge | 831 | #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 |
832 | #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 |
||
833 | #define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 |
||
1430 | serge | 834 | #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL 0x70 |
1963 | serge | 835 | #define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER 0x00 |
836 | #define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER 0x10 |
||
837 | #define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER 0x20 |
||
838 | #define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER 0x30 |
||
839 | #define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER 0x40 |
||
840 | #define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER 0x50 |
||
1430 | serge | 841 | |
842 | typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3 |
||
843 | { |
||
844 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
845 | ATOM_DIG_ENCODER_CONFIG_V3 acConfig; |
||
846 | UCHAR ucAction; |
||
1963 | serge | 847 | union { |
6104 | serge | 848 | UCHAR ucEncoderMode; |
1430 | serge | 849 | // =0: DP encoder |
850 | // =1: LVDS encoder |
||
851 | // =2: DVI encoder |
||
852 | // =3: HDMI encoder |
||
853 | // =4: SDVO encoder |
||
854 | // =5: DP audio |
||
1963 | serge | 855 | UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE |
856 | // =0: external DP |
||
857 | // =1: internal DP2 |
||
858 | // =0x11: internal DP1 for NutMeg/Travis DP translator |
||
859 | }; |
||
1430 | serge | 860 | UCHAR ucLaneNum; // how many lanes to enable |
861 | UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP |
||
862 | UCHAR ucReserved; |
||
863 | }DIG_ENCODER_CONTROL_PARAMETERS_V3; |
||
864 | |||
1963 | serge | 865 | //ucTableFormatRevision=1 |
866 | //ucTableContentRevision=4 |
||
867 | // start from NI |
||
868 | // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver |
||
869 | typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 |
||
870 | { |
||
871 | #if ATOM_BIG_ENDIAN |
||
872 | UCHAR ucReserved1:1; |
||
873 | UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) |
||
874 | UCHAR ucReserved:2; |
||
875 | UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version |
||
876 | #else |
||
877 | UCHAR ucDPLinkRate:2; // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz <= Changed comparing to previous version |
||
878 | UCHAR ucReserved:2; |
||
879 | UCHAR ucDigSel:3; // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F) |
||
880 | UCHAR ucReserved1:1; |
||
881 | #endif |
||
882 | }ATOM_DIG_ENCODER_CONFIG_V4; |
||
1430 | serge | 883 | |
1963 | serge | 884 | #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK 0x03 |
885 | #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00 |
||
886 | #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01 |
||
887 | #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02 |
||
2997 | Serge | 888 | #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03 |
1963 | serge | 889 | #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70 |
890 | #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00 |
||
891 | #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10 |
||
892 | #define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER 0x20 |
||
893 | #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30 |
||
894 | #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40 |
||
895 | #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50 |
||
2997 | Serge | 896 | #define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60 |
1963 | serge | 897 | |
898 | typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 |
||
899 | { |
||
900 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
901 | union{ |
||
902 | ATOM_DIG_ENCODER_CONFIG_V4 acConfig; |
||
903 | UCHAR ucConfig; |
||
904 | }; |
||
905 | UCHAR ucAction; |
||
906 | union { |
||
6104 | serge | 907 | UCHAR ucEncoderMode; |
1963 | serge | 908 | // =0: DP encoder |
909 | // =1: LVDS encoder |
||
910 | // =2: DVI encoder |
||
911 | // =3: HDMI encoder |
||
912 | // =4: SDVO encoder |
||
913 | // =5: DP audio |
||
914 | UCHAR ucPanelMode; // only valid when ucAction == ATOM_ENCODER_CMD_SETUP_PANEL_MODE |
||
915 | // =0: external DP |
||
916 | // =1: internal DP2 |
||
917 | // =0x11: internal DP1 for NutMeg/Travis DP translator |
||
918 | }; |
||
919 | UCHAR ucLaneNum; // how many lanes to enable |
||
920 | UCHAR ucBitPerColor; // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP |
||
921 | UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version |
||
922 | }DIG_ENCODER_CONTROL_PARAMETERS_V4; |
||
923 | |||
1430 | serge | 924 | // define ucBitPerColor: |
925 | #define PANEL_BPC_UNDEFINE 0x00 |
||
926 | #define PANEL_6BIT_PER_COLOR 0x01 |
||
927 | #define PANEL_8BIT_PER_COLOR 0x02 |
||
928 | #define PANEL_10BIT_PER_COLOR 0x03 |
||
929 | #define PANEL_12BIT_PER_COLOR 0x04 |
||
930 | #define PANEL_16BIT_PER_COLOR 0x05 |
||
931 | |||
1963 | serge | 932 | //define ucPanelMode |
933 | #define DP_PANEL_MODE_EXTERNAL_DP_MODE 0x00 |
||
934 | #define DP_PANEL_MODE_INTERNAL_DP2_MODE 0x01 |
||
935 | #define DP_PANEL_MODE_INTERNAL_DP1_MODE 0x11 |
||
936 | |||
6104 | serge | 937 | /****************************************************************************/ |
1430 | serge | 938 | // Structures used by UNIPHYTransmitterControlTable |
939 | // LVTMATransmitterControlTable |
||
940 | // DVOOutputControlTable |
||
6104 | serge | 941 | /****************************************************************************/ |
1430 | serge | 942 | typedef struct _ATOM_DP_VS_MODE |
943 | { |
||
6104 | serge | 944 | UCHAR ucLaneSel; |
945 | UCHAR ucLaneSet; |
||
1430 | serge | 946 | }ATOM_DP_VS_MODE; |
1117 | serge | 947 | |
1430 | serge | 948 | typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS |
949 | { |
||
950 | union |
||
951 | { |
||
952 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
953 | USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h |
||
954 | ATOM_DP_VS_MODE asMode; // DP Voltage swing mode |
||
1117 | serge | 955 | }; |
6104 | serge | 956 | UCHAR ucConfig; |
1430 | serge | 957 | // [0]=0: 4 lane Link, |
958 | // =1: 8 lane Link ( Dual Links TMDS ) |
||
959 | // [1]=0: InCoherent mode |
||
960 | // =1: Coherent Mode |
||
961 | // [2] Link Select: |
||
962 | // =0: PHY linkA if bfLane<3 |
||
963 | // =1: PHY linkB if bfLanes<3 |
||
964 | // =0: PHY linkA+B if bfLanes=3 |
||
965 | // [5:4]PCIE lane Sel |
||
966 | // =0: lane 0~3 or 0~7 |
||
967 | // =1: lane 4~7 |
||
968 | // =2: lane 8~11 or 8~15 |
||
969 | // =3: lane 12~15 |
||
970 | UCHAR ucAction; // =0: turn off encoder |
||
971 | // =1: turn on encoder |
||
6104 | serge | 972 | UCHAR ucReserved[4]; |
1430 | serge | 973 | }DIG_TRANSMITTER_CONTROL_PARAMETERS; |
1117 | serge | 974 | |
6104 | serge | 975 | #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PARAMETERS |
1117 | serge | 976 | |
1430 | serge | 977 | //ucInitInfo |
6104 | serge | 978 | #define ATOM_TRAMITTER_INITINFO_CONNECTOR_MASK 0x00ff |
1117 | serge | 979 | |
1430 | serge | 980 | //ucConfig |
1117 | serge | 981 | #define ATOM_TRANSMITTER_CONFIG_8LANE_LINK 0x01 |
982 | #define ATOM_TRANSMITTER_CONFIG_COHERENT 0x02 |
||
983 | #define ATOM_TRANSMITTER_CONFIG_LINK_SEL_MASK 0x04 |
||
984 | #define ATOM_TRANSMITTER_CONFIG_LINKA 0x00 |
||
985 | #define ATOM_TRANSMITTER_CONFIG_LINKB 0x04 |
||
6104 | serge | 986 | #define ATOM_TRANSMITTER_CONFIG_LINKA_B 0x00 |
1117 | serge | 987 | #define ATOM_TRANSMITTER_CONFIG_LINKB_A 0x04 |
988 | |||
1430 | serge | 989 | #define ATOM_TRANSMITTER_CONFIG_ENCODER_SEL_MASK 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE |
990 | #define ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER 0x00 // only used when ATOM_TRANSMITTER_ACTION_ENABLE |
||
991 | #define ATOM_TRANSMITTER_CONFIG_DIG2_ENCODER 0x08 // only used when ATOM_TRANSMITTER_ACTION_ENABLE |
||
1117 | serge | 992 | |
993 | #define ATOM_TRANSMITTER_CONFIG_CLKSRC_MASK 0x30 |
||
994 | #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL 0x00 |
||
995 | #define ATOM_TRANSMITTER_CONFIG_CLKSRC_PCIE 0x20 |
||
996 | #define ATOM_TRANSMITTER_CONFIG_CLKSRC_XTALIN 0x30 |
||
997 | #define ATOM_TRANSMITTER_CONFIG_LANE_SEL_MASK 0xc0 |
||
998 | #define ATOM_TRANSMITTER_CONFIG_LANE_0_3 0x00 |
||
999 | #define ATOM_TRANSMITTER_CONFIG_LANE_0_7 0x00 |
||
1000 | #define ATOM_TRANSMITTER_CONFIG_LANE_4_7 0x40 |
||
1001 | #define ATOM_TRANSMITTER_CONFIG_LANE_8_11 0x80 |
||
1002 | #define ATOM_TRANSMITTER_CONFIG_LANE_8_15 0x80 |
||
1003 | #define ATOM_TRANSMITTER_CONFIG_LANE_12_15 0xc0 |
||
1004 | |||
1430 | serge | 1005 | //ucAction |
1117 | serge | 1006 | #define ATOM_TRANSMITTER_ACTION_DISABLE 0 |
1007 | #define ATOM_TRANSMITTER_ACTION_ENABLE 1 |
||
1008 | #define ATOM_TRANSMITTER_ACTION_LCD_BLOFF 2 |
||
1009 | #define ATOM_TRANSMITTER_ACTION_LCD_BLON 3 |
||
1010 | #define ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL 4 |
||
1011 | #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START 5 |
||
1012 | #define ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP 6 |
||
1013 | #define ATOM_TRANSMITTER_ACTION_INIT 7 |
||
1014 | #define ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT 8 |
||
1015 | #define ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT 9 |
||
1016 | #define ATOM_TRANSMITTER_ACTION_SETUP 10 |
||
1017 | #define ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH 11 |
||
1430 | serge | 1018 | #define ATOM_TRANSMITTER_ACTION_POWER_ON 12 |
1019 | #define ATOM_TRANSMITTER_ACTION_POWER_OFF 13 |
||
1117 | serge | 1020 | |
1430 | serge | 1021 | // Following are used for DigTransmitterControlTable ver1.2 |
1022 | typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V2 |
||
1023 | { |
||
1117 | serge | 1024 | #if ATOM_BIG_ENDIAN |
1430 | serge | 1025 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
1026 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1027 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
6104 | serge | 1028 | UCHAR ucReserved:1; |
1430 | serge | 1029 | UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector |
1030 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) |
||
1031 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1032 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1117 | serge | 1033 | |
1430 | serge | 1034 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
1035 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
||
1117 | serge | 1036 | #else |
1430 | serge | 1037 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
1038 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
||
1039 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1040 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1041 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA( DIG inst0 ). =1: Data/clk path source from DIGB ( DIG inst1 ) |
||
1042 | UCHAR fDPConnector:1; //bit4=0: DP connector =1: None DP connector |
||
6104 | serge | 1043 | UCHAR ucReserved:1; |
1430 | serge | 1044 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
1045 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1046 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
1117 | serge | 1047 | #endif |
1430 | serge | 1048 | }ATOM_DIG_TRANSMITTER_CONFIG_V2; |
1117 | serge | 1049 | |
1430 | serge | 1050 | //ucConfig |
1051 | //Bit0 |
||
1117 | serge | 1052 | #define ATOM_TRANSMITTER_CONFIG_V2_DUAL_LINK_CONNECTOR 0x01 |
1053 | |||
1430 | serge | 1054 | //Bit1 |
1117 | serge | 1055 | #define ATOM_TRANSMITTER_CONFIG_V2_COHERENT 0x02 |
1056 | |||
1430 | serge | 1057 | //Bit2 |
1117 | serge | 1058 | #define ATOM_TRANSMITTER_CONFIG_V2_LINK_SEL_MASK 0x04 |
6104 | serge | 1059 | #define ATOM_TRANSMITTER_CONFIG_V2_LINKA 0x00 |
1117 | serge | 1060 | #define ATOM_TRANSMITTER_CONFIG_V2_LINKB 0x04 |
1061 | |||
1430 | serge | 1062 | // Bit3 |
1117 | serge | 1063 | #define ATOM_TRANSMITTER_CONFIG_V2_ENCODER_SEL_MASK 0x08 |
1430 | serge | 1064 | #define ATOM_TRANSMITTER_CONFIG_V2_DIG1_ENCODER 0x00 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP |
1065 | #define ATOM_TRANSMITTER_CONFIG_V2_DIG2_ENCODER 0x08 // only used when ucAction == ATOM_TRANSMITTER_ACTION_ENABLE or ATOM_TRANSMITTER_ACTION_SETUP |
||
1117 | serge | 1066 | |
1430 | serge | 1067 | // Bit4 |
1117 | serge | 1068 | #define ATOM_TRASMITTER_CONFIG_V2_DP_CONNECTOR 0x10 |
1069 | |||
1430 | serge | 1070 | // Bit7:6 |
1117 | serge | 1071 | #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER_SEL_MASK 0xC0 |
1430 | serge | 1072 | #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER1 0x00 //AB |
1073 | #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER2 0x40 //CD |
||
1074 | #define ATOM_TRANSMITTER_CONFIG_V2_TRANSMITTER3 0x80 //EF |
||
1117 | serge | 1075 | |
1430 | serge | 1076 | typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V2 |
1077 | { |
||
1078 | union |
||
1079 | { |
||
1080 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
1081 | USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h |
||
1082 | ATOM_DP_VS_MODE asMode; // DP Voltage swing mode |
||
1117 | serge | 1083 | }; |
6104 | serge | 1084 | ATOM_DIG_TRANSMITTER_CONFIG_V2 acConfig; |
1430 | serge | 1085 | UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX |
6104 | serge | 1086 | UCHAR ucReserved[4]; |
1430 | serge | 1087 | }DIG_TRANSMITTER_CONTROL_PARAMETERS_V2; |
1117 | serge | 1088 | |
1430 | serge | 1089 | typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3 |
1090 | { |
||
1091 | #if ATOM_BIG_ENDIAN |
||
1092 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
||
1093 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1094 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
1095 | UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2 |
||
1096 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F |
||
1097 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1098 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1099 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
||
1100 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
||
1101 | #else |
||
1102 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
||
1103 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
||
1104 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1105 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1106 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F |
||
1107 | UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, EXT_CLK=2 |
||
1108 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
||
1109 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1110 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
1111 | #endif |
||
1112 | }ATOM_DIG_TRANSMITTER_CONFIG_V3; |
||
1113 | |||
1963 | serge | 1114 | |
1430 | serge | 1115 | typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3 |
1116 | { |
||
1117 | union |
||
1118 | { |
||
1119 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
1120 | USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h |
||
1121 | ATOM_DP_VS_MODE asMode; // DP Voltage swing mode |
||
1122 | }; |
||
1123 | ATOM_DIG_TRANSMITTER_CONFIG_V3 acConfig; |
||
1124 | UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX |
||
1125 | UCHAR ucLaneNum; |
||
1126 | UCHAR ucReserved[3]; |
||
1127 | }DIG_TRANSMITTER_CONTROL_PARAMETERS_V3; |
||
1128 | |||
1129 | //ucConfig |
||
1130 | //Bit0 |
||
1131 | #define ATOM_TRANSMITTER_CONFIG_V3_DUAL_LINK_CONNECTOR 0x01 |
||
1132 | |||
1133 | //Bit1 |
||
1134 | #define ATOM_TRANSMITTER_CONFIG_V3_COHERENT 0x02 |
||
1135 | |||
1136 | //Bit2 |
||
1137 | #define ATOM_TRANSMITTER_CONFIG_V3_LINK_SEL_MASK 0x04 |
||
1138 | #define ATOM_TRANSMITTER_CONFIG_V3_LINKA 0x00 |
||
1139 | #define ATOM_TRANSMITTER_CONFIG_V3_LINKB 0x04 |
||
1140 | |||
1141 | // Bit3 |
||
1142 | #define ATOM_TRANSMITTER_CONFIG_V3_ENCODER_SEL_MASK 0x08 |
||
1143 | #define ATOM_TRANSMITTER_CONFIG_V3_DIG1_ENCODER 0x00 |
||
1144 | #define ATOM_TRANSMITTER_CONFIG_V3_DIG2_ENCODER 0x08 |
||
1145 | |||
1146 | // Bit5:4 |
||
1147 | #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SEL_MASK 0x30 |
||
1148 | #define ATOM_TRASMITTER_CONFIG_V3_P1PLL 0x00 |
||
1149 | #define ATOM_TRASMITTER_CONFIG_V3_P2PLL 0x10 |
||
1150 | #define ATOM_TRASMITTER_CONFIG_V3_REFCLK_SRC_EXT 0x20 |
||
1151 | |||
1152 | // Bit7:6 |
||
1153 | #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER_SEL_MASK 0xC0 |
||
1154 | #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER1 0x00 //AB |
||
1155 | #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2 0x40 //CD |
||
1156 | #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3 0x80 //EF |
||
1157 | |||
1963 | serge | 1158 | |
1430 | serge | 1159 | /****************************************************************************/ |
1963 | serge | 1160 | // Structures used by UNIPHYTransmitterControlTable V1.4 |
1161 | // ASIC Families: NI |
||
1162 | // ucTableFormatRevision=1 |
||
1163 | // ucTableContentRevision=4 |
||
1164 | /****************************************************************************/ |
||
1165 | typedef struct _ATOM_DP_VS_MODE_V4 |
||
1166 | { |
||
1167 | UCHAR ucLaneSel; |
||
1168 | union |
||
1169 | { |
||
1170 | UCHAR ucLaneSet; |
||
1171 | struct { |
||
1172 | #if ATOM_BIG_ENDIAN |
||
1173 | UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 |
||
1174 | UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level |
||
1175 | UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level |
||
1176 | #else |
||
1177 | UCHAR ucVOLTAGE_SWING:3; //Bit[2:0] Voltage Swing Level |
||
1178 | UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level |
||
1179 | UCHAR ucPOST_CURSOR2:2; //Bit[7:6] Post Cursor2 Level <= New in V4 |
||
1180 | #endif |
||
1181 | }; |
||
1182 | }; |
||
1183 | }ATOM_DP_VS_MODE_V4; |
||
1184 | |||
1185 | typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4 |
||
1186 | { |
||
1187 | #if ATOM_BIG_ENDIAN |
||
1188 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
||
1189 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1190 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
1191 | UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New |
||
1192 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F |
||
1193 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1194 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1195 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
||
1196 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
||
1197 | #else |
||
1198 | UCHAR fDualLinkConnector:1; //bit0=1: Dual Link DVI connector |
||
1199 | UCHAR fCoherentMode:1; //bit1=1: Coherent Mode ( for DVI/HDMI mode ) |
||
1200 | UCHAR ucLinkSel:1; //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E |
||
1201 | // =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F |
||
1202 | UCHAR ucEncoderSel:1; //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F |
||
1203 | UCHAR ucRefClkSource:2; //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3 <= New |
||
1204 | UCHAR ucTransmitterSel:2; //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB ) |
||
1205 | // =1 Dig Transmitter 2 ( Uniphy CD ) |
||
1206 | // =2 Dig Transmitter 3 ( Uniphy EF ) |
||
1207 | #endif |
||
1208 | }ATOM_DIG_TRANSMITTER_CONFIG_V4; |
||
1209 | |||
1210 | typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 |
||
1211 | { |
||
1212 | union |
||
1213 | { |
||
1214 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
1215 | USHORT usInitInfo; // when init uniphy,lower 8bit is used for connector type defined in objectid.h |
||
1216 | ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode Redefined comparing to previous version |
||
1217 | }; |
||
1218 | union |
||
1219 | { |
||
1220 | ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig; |
||
1221 | UCHAR ucConfig; |
||
1222 | }; |
||
1223 | UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_XXX |
||
1224 | UCHAR ucLaneNum; |
||
1225 | UCHAR ucReserved[3]; |
||
1226 | }DIG_TRANSMITTER_CONTROL_PARAMETERS_V4; |
||
1227 | |||
1228 | //ucConfig |
||
1229 | //Bit0 |
||
1230 | #define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR 0x01 |
||
1231 | //Bit1 |
||
1232 | #define ATOM_TRANSMITTER_CONFIG_V4_COHERENT 0x02 |
||
1233 | //Bit2 |
||
1234 | #define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK 0x04 |
||
1235 | #define ATOM_TRANSMITTER_CONFIG_V4_LINKA 0x00 |
||
1236 | #define ATOM_TRANSMITTER_CONFIG_V4_LINKB 0x04 |
||
1237 | // Bit3 |
||
1238 | #define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK 0x08 |
||
1239 | #define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER 0x00 |
||
1240 | #define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER 0x08 |
||
1241 | // Bit5:4 |
||
1242 | #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 0x30 |
||
1243 | #define ATOM_TRANSMITTER_CONFIG_V4_P1PLL 0x00 |
||
1244 | #define ATOM_TRANSMITTER_CONFIG_V4_P2PLL 0x10 |
||
1245 | #define ATOM_TRANSMITTER_CONFIG_V4_DCPLL 0x20 // New in _V4 |
||
1246 | #define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT 0x30 // Changed comparing to V3 |
||
1247 | // Bit7:6 |
||
1248 | #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK 0xC0 |
||
1249 | #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1 0x00 //AB |
||
1250 | #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2 0x40 //CD |
||
1251 | #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF |
||
1252 | |||
1253 | |||
2997 | Serge | 1254 | typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5 |
1255 | { |
||
1256 | #if ATOM_BIG_ENDIAN |
||
1257 | UCHAR ucReservd1:1; |
||
1258 | UCHAR ucHPDSel:3; |
||
1259 | UCHAR ucPhyClkSrcId:2; |
||
1260 | UCHAR ucCoherentMode:1; |
||
1261 | UCHAR ucReserved:1; |
||
1262 | #else |
||
1263 | UCHAR ucReserved:1; |
||
1264 | UCHAR ucCoherentMode:1; |
||
1265 | UCHAR ucPhyClkSrcId:2; |
||
1266 | UCHAR ucHPDSel:3; |
||
1267 | UCHAR ucReservd1:1; |
||
1268 | #endif |
||
1269 | }ATOM_DIG_TRANSMITTER_CONFIG_V5; |
||
1270 | |||
1271 | typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 |
||
1272 | { |
||
1273 | USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio |
||
1274 | UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF |
||
1275 | UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx |
||
1276 | UCHAR ucLaneNum; // indicate lane number 1-8 |
||
1277 | UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h |
||
1278 | UCHAR ucDigMode; // indicate DIG mode |
||
1279 | union{ |
||
1280 | ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; |
||
1281 | UCHAR ucConfig; |
||
1282 | }; |
||
1283 | UCHAR ucDigEncoderSel; // indicate DIG front end encoder |
||
1284 | UCHAR ucDPLaneSet; |
||
1285 | UCHAR ucReserved; |
||
1286 | UCHAR ucReserved1; |
||
1287 | }DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5; |
||
1288 | |||
1289 | //ucPhyId |
||
1290 | #define ATOM_PHY_ID_UNIPHYA 0 |
||
1291 | #define ATOM_PHY_ID_UNIPHYB 1 |
||
1292 | #define ATOM_PHY_ID_UNIPHYC 2 |
||
1293 | #define ATOM_PHY_ID_UNIPHYD 3 |
||
1294 | #define ATOM_PHY_ID_UNIPHYE 4 |
||
1295 | #define ATOM_PHY_ID_UNIPHYF 5 |
||
1296 | #define ATOM_PHY_ID_UNIPHYG 6 |
||
1297 | |||
1298 | // ucDigEncoderSel |
||
1299 | #define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01 |
||
1300 | #define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02 |
||
1301 | #define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04 |
||
1302 | #define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08 |
||
1303 | #define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10 |
||
1304 | #define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20 |
||
1305 | #define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40 |
||
1306 | |||
1307 | // ucDigMode |
||
1308 | #define ATOM_TRANSMITTER_DIGMODE_V5_DP 0 |
||
1309 | #define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1 |
||
1310 | #define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2 |
||
1311 | #define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3 |
||
1312 | #define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4 |
||
1313 | #define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5 |
||
1314 | |||
1315 | // ucDPLaneSet |
||
1316 | #define DP_LANE_SET__0DB_0_4V 0x00 |
||
1317 | #define DP_LANE_SET__0DB_0_6V 0x01 |
||
1318 | #define DP_LANE_SET__0DB_0_8V 0x02 |
||
1319 | #define DP_LANE_SET__0DB_1_2V 0x03 |
||
1320 | #define DP_LANE_SET__3_5DB_0_4V 0x08 |
||
1321 | #define DP_LANE_SET__3_5DB_0_6V 0x09 |
||
1322 | #define DP_LANE_SET__3_5DB_0_8V 0x0a |
||
1323 | #define DP_LANE_SET__6DB_0_4V 0x10 |
||
1324 | #define DP_LANE_SET__6DB_0_6V 0x11 |
||
1325 | #define DP_LANE_SET__9_5DB_0_4V 0x18 |
||
1326 | |||
1327 | // ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; |
||
1328 | // Bit1 |
||
1329 | #define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02 |
||
1330 | |||
1331 | // Bit3:2 |
||
1332 | #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c |
||
1333 | #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02 |
||
1334 | |||
1335 | #define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00 |
||
1336 | #define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04 |
||
1337 | #define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08 |
||
1338 | #define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c |
||
1339 | // Bit6:4 |
||
1340 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70 |
||
1341 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04 |
||
1342 | |||
1343 | #define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00 |
||
1344 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10 |
||
1345 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20 |
||
1346 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30 |
||
1347 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40 |
||
1348 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50 |
||
1349 | #define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60 |
||
1350 | |||
1351 | #define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 |
||
1352 | |||
1353 | |||
1963 | serge | 1354 | /****************************************************************************/ |
1355 | // Structures used by ExternalEncoderControlTable V1.3 |
||
1356 | // ASIC Families: Evergreen, Llano, NI |
||
1357 | // ucTableFormatRevision=1 |
||
1358 | // ucTableContentRevision=3 |
||
1359 | /****************************************************************************/ |
||
1360 | |||
1361 | typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 |
||
1362 | { |
||
1363 | union{ |
||
1364 | USHORT usPixelClock; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT |
||
1365 | USHORT usConnectorId; // connector id, valid when ucAction = INIT |
||
1366 | }; |
||
1367 | UCHAR ucConfig; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT |
||
1368 | UCHAR ucAction; // |
||
1369 | UCHAR ucEncoderMode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT |
||
1370 | UCHAR ucLaneNum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT |
||
1371 | UCHAR ucBitPerColor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP |
||
1372 | UCHAR ucReserved; |
||
1373 | }EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3; |
||
1374 | |||
1375 | // ucAction |
||
1376 | #define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT 0x00 |
||
1377 | #define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT 0x01 |
||
1378 | #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT 0x07 |
||
1379 | #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP 0x0f |
||
1380 | #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF 0x10 |
||
1381 | #define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING 0x11 |
||
1382 | #define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION 0x12 |
||
1986 | serge | 1383 | #define EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP 0x14 |
1963 | serge | 1384 | |
1385 | // ucConfig |
||
1386 | #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK 0x03 |
||
1387 | #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ 0x00 |
||
1388 | #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ 0x01 |
||
1389 | #define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ 0x02 |
||
1390 | #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK 0x70 |
||
1391 | #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 0x00 |
||
1392 | #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 0x10 |
||
1393 | #define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 0x20 |
||
1394 | |||
1395 | typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3 |
||
1396 | { |
||
1397 | EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder; |
||
1398 | ULONG ulReserved[2]; |
||
1399 | }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3; |
||
1400 | |||
1401 | |||
1402 | /****************************************************************************/ |
||
1430 | serge | 1403 | // Structures used by DAC1OuputControlTable |
1404 | // DAC2OuputControlTable |
||
1405 | // LVTMAOutputControlTable (Before DEC30) |
||
1406 | // TMDSAOutputControlTable (Before DEC30) |
||
6104 | serge | 1407 | /****************************************************************************/ |
1430 | serge | 1408 | typedef struct _DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
1409 | { |
||
1410 | UCHAR ucAction; // Possible input:ATOM_ENABLE||ATOMDISABLE |
||
1411 | // When the display is LCD, in addition to above: |
||
1412 | // ATOM_LCD_BLOFF|| ATOM_LCD_BLON ||ATOM_LCD_BL_BRIGHTNESS_CONTROL||ATOM_LCD_SELFTEST_START|| |
||
1413 | // ATOM_LCD_SELFTEST_STOP |
||
6104 | serge | 1414 | |
1430 | serge | 1415 | UCHAR aucPadding[3]; // padding to DWORD aligned |
1416 | }DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS; |
||
1117 | serge | 1417 | |
1418 | #define DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1419 | |||
1430 | serge | 1420 | |
6104 | serge | 1421 | #define CRT1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
1117 | serge | 1422 | #define CRT1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
1423 | |||
6104 | serge | 1424 | #define CRT2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
1117 | serge | 1425 | #define CRT2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
1426 | |||
1427 | #define CV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1428 | #define CV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
||
1429 | |||
1430 | #define TV1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1431 | #define TV1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
||
1432 | |||
1433 | #define DFP1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1434 | #define DFP1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
||
1435 | |||
1436 | #define DFP2_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1437 | #define DFP2_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
||
1438 | |||
1439 | #define LCD1_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1440 | #define LCD1_OUTPUT_CONTROL_PS_ALLOCATION DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION |
||
1441 | |||
1442 | #define DVO_OUTPUT_CONTROL_PARAMETERS DISPLAY_DEVICE_OUTPUT_CONTROL_PARAMETERS |
||
1443 | #define DVO_OUTPUT_CONTROL_PS_ALLOCATION DIG_TRANSMITTER_CONTROL_PS_ALLOCATION |
||
1444 | #define DVO_OUTPUT_CONTROL_PARAMETERS_V3 DIG_TRANSMITTER_CONTROL_PARAMETERS |
||
1445 | |||
6104 | serge | 1446 | /****************************************************************************/ |
1430 | serge | 1447 | // Structures used by BlankCRTCTable |
6104 | serge | 1448 | /****************************************************************************/ |
1430 | serge | 1449 | typedef struct _BLANK_CRTC_PARAMETERS |
1450 | { |
||
1451 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
1452 | UCHAR ucBlanking; // ATOM_BLANKING or ATOM_BLANKINGOFF |
||
6104 | serge | 1453 | USHORT usBlackColorRCr; |
1454 | USHORT usBlackColorGY; |
||
1455 | USHORT usBlackColorBCb; |
||
1430 | serge | 1456 | }BLANK_CRTC_PARAMETERS; |
1117 | serge | 1457 | #define BLANK_CRTC_PS_ALLOCATION BLANK_CRTC_PARAMETERS |
1458 | |||
6104 | serge | 1459 | /****************************************************************************/ |
1430 | serge | 1460 | // Structures used by EnableCRTCTable |
1461 | // EnableCRTCMemReqTable |
||
1462 | // UpdateCRTC_DoubleBufferRegistersTable |
||
1463 | /****************************************************************************/ |
||
1464 | typedef struct _ENABLE_CRTC_PARAMETERS |
||
1465 | { |
||
1466 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
1467 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 1468 | UCHAR ucPadding[2]; |
1430 | serge | 1469 | }ENABLE_CRTC_PARAMETERS; |
1117 | serge | 1470 | #define ENABLE_CRTC_PS_ALLOCATION ENABLE_CRTC_PARAMETERS |
1471 | |||
6104 | serge | 1472 | /****************************************************************************/ |
1430 | serge | 1473 | // Structures used by SetCRTC_OverScanTable |
6104 | serge | 1474 | /****************************************************************************/ |
1430 | serge | 1475 | typedef struct _SET_CRTC_OVERSCAN_PARAMETERS |
1476 | { |
||
1477 | USHORT usOverscanRight; // right |
||
1478 | USHORT usOverscanLeft; // left |
||
1479 | USHORT usOverscanBottom; // bottom |
||
1480 | USHORT usOverscanTop; // top |
||
1481 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
6104 | serge | 1482 | UCHAR ucPadding[3]; |
1430 | serge | 1483 | }SET_CRTC_OVERSCAN_PARAMETERS; |
1117 | serge | 1484 | #define SET_CRTC_OVERSCAN_PS_ALLOCATION SET_CRTC_OVERSCAN_PARAMETERS |
1485 | |||
6104 | serge | 1486 | /****************************************************************************/ |
1430 | serge | 1487 | // Structures used by SetCRTC_ReplicationTable |
6104 | serge | 1488 | /****************************************************************************/ |
1430 | serge | 1489 | typedef struct _SET_CRTC_REPLICATION_PARAMETERS |
1490 | { |
||
1491 | UCHAR ucH_Replication; // horizontal replication |
||
1492 | UCHAR ucV_Replication; // vertical replication |
||
1493 | UCHAR usCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
6104 | serge | 1494 | UCHAR ucPadding; |
1430 | serge | 1495 | }SET_CRTC_REPLICATION_PARAMETERS; |
1117 | serge | 1496 | #define SET_CRTC_REPLICATION_PS_ALLOCATION SET_CRTC_REPLICATION_PARAMETERS |
1497 | |||
6104 | serge | 1498 | /****************************************************************************/ |
1430 | serge | 1499 | // Structures used by SelectCRTC_SourceTable |
6104 | serge | 1500 | /****************************************************************************/ |
1430 | serge | 1501 | typedef struct _SELECT_CRTC_SOURCE_PARAMETERS |
1502 | { |
||
1503 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
1504 | UCHAR ucDevice; // ATOM_DEVICE_CRT1|ATOM_DEVICE_CRT2|.... |
||
6104 | serge | 1505 | UCHAR ucPadding[2]; |
1430 | serge | 1506 | }SELECT_CRTC_SOURCE_PARAMETERS; |
1117 | serge | 1507 | #define SELECT_CRTC_SOURCE_PS_ALLOCATION SELECT_CRTC_SOURCE_PARAMETERS |
1508 | |||
1430 | serge | 1509 | typedef struct _SELECT_CRTC_SOURCE_PARAMETERS_V2 |
1510 | { |
||
1511 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
||
1512 | UCHAR ucEncoderID; // DAC1/DAC2/TVOUT/DIG1/DIG2/DVO |
||
1513 | UCHAR ucEncodeMode; // Encoding mode, only valid when using DIG1/DIG2/DVO |
||
6104 | serge | 1514 | UCHAR ucPadding; |
1430 | serge | 1515 | }SELECT_CRTC_SOURCE_PARAMETERS_V2; |
1117 | serge | 1516 | |
1430 | serge | 1517 | //ucEncoderID |
1518 | //#define ASIC_INT_DAC1_ENCODER_ID 0x00 |
||
1519 | //#define ASIC_INT_TV_ENCODER_ID 0x02 |
||
1520 | //#define ASIC_INT_DIG1_ENCODER_ID 0x03 |
||
1521 | //#define ASIC_INT_DAC2_ENCODER_ID 0x04 |
||
1522 | //#define ASIC_EXT_TV_ENCODER_ID 0x06 |
||
1523 | //#define ASIC_INT_DVO_ENCODER_ID 0x07 |
||
1524 | //#define ASIC_INT_DIG2_ENCODER_ID 0x09 |
||
1525 | //#define ASIC_EXT_DIG_ENCODER_ID 0x05 |
||
1117 | serge | 1526 | |
1430 | serge | 1527 | //ucEncodeMode |
1528 | //#define ATOM_ENCODER_MODE_DP 0 |
||
1529 | //#define ATOM_ENCODER_MODE_LVDS 1 |
||
1530 | //#define ATOM_ENCODER_MODE_DVI 2 |
||
1531 | //#define ATOM_ENCODER_MODE_HDMI 3 |
||
1532 | //#define ATOM_ENCODER_MODE_SDVO 4 |
||
1533 | //#define ATOM_ENCODER_MODE_TV 13 |
||
1534 | //#define ATOM_ENCODER_MODE_CV 14 |
||
1535 | //#define ATOM_ENCODER_MODE_CRT 15 |
||
1117 | serge | 1536 | |
1430 | serge | 1537 | /****************************************************************************/ |
1538 | // Structures used by SetPixelClockTable |
||
1539 | // GetPixelClockTable |
||
1540 | /****************************************************************************/ |
||
1541 | //Major revision=1., Minor revision=1 |
||
1542 | typedef struct _PIXEL_CLOCK_PARAMETERS |
||
1543 | { |
||
1544 | USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) |
||
1545 | // 0 means disable PPLL |
||
1546 | USHORT usRefDiv; // Reference divider |
||
1547 | USHORT usFbDiv; // feedback divider |
||
1548 | UCHAR ucPostDiv; // post divider |
||
1549 | UCHAR ucFracFbDiv; // fractional feedback divider |
||
1550 | UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 |
||
1551 | UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER |
||
1552 | UCHAR ucCRTC; // Which CRTC uses this Ppll |
||
6104 | serge | 1553 | UCHAR ucPadding; |
1430 | serge | 1554 | }PIXEL_CLOCK_PARAMETERS; |
1117 | serge | 1555 | |
1430 | serge | 1556 | //Major revision=1., Minor revision=2, add ucMiscIfno |
1557 | //ucMiscInfo: |
||
1117 | serge | 1558 | #define MISC_FORCE_REPROG_PIXEL_CLOCK 0x1 |
1559 | #define MISC_DEVICE_INDEX_MASK 0xF0 |
||
1560 | #define MISC_DEVICE_INDEX_SHIFT 4 |
||
1561 | |||
1430 | serge | 1562 | typedef struct _PIXEL_CLOCK_PARAMETERS_V2 |
1563 | { |
||
1564 | USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) |
||
1565 | // 0 means disable PPLL |
||
1566 | USHORT usRefDiv; // Reference divider |
||
1567 | USHORT usFbDiv; // feedback divider |
||
1568 | UCHAR ucPostDiv; // post divider |
||
1569 | UCHAR ucFracFbDiv; // fractional feedback divider |
||
1570 | UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 |
||
1571 | UCHAR ucRefDivSrc; // ATOM_PJITTER or ATO_NONPJITTER |
||
1572 | UCHAR ucCRTC; // Which CRTC uses this Ppll |
||
1573 | UCHAR ucMiscInfo; // Different bits for different purpose, bit [7:4] as device index, bit[0]=Force prog |
||
1574 | }PIXEL_CLOCK_PARAMETERS_V2; |
||
1117 | serge | 1575 | |
1430 | serge | 1576 | //Major revision=1., Minor revision=3, structure/definition change |
1577 | //ucEncoderMode: |
||
1578 | //ATOM_ENCODER_MODE_DP |
||
1579 | //ATOM_ENOCDER_MODE_LVDS |
||
1580 | //ATOM_ENOCDER_MODE_DVI |
||
1581 | //ATOM_ENOCDER_MODE_HDMI |
||
1582 | //ATOM_ENOCDER_MODE_SDVO |
||
1583 | //ATOM_ENCODER_MODE_TV 13 |
||
1584 | //ATOM_ENCODER_MODE_CV 14 |
||
1585 | //ATOM_ENCODER_MODE_CRT 15 |
||
1117 | serge | 1586 | |
1430 | serge | 1587 | //ucDVOConfig |
1588 | //#define DVO_ENCODER_CONFIG_RATE_SEL 0x01 |
||
1589 | //#define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 |
||
1590 | //#define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 |
||
1591 | //#define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c |
||
1592 | //#define DVO_ENCODER_CONFIG_LOW12BIT 0x00 |
||
1593 | //#define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 |
||
1594 | //#define DVO_ENCODER_CONFIG_24BIT 0x08 |
||
1117 | serge | 1595 | |
1430 | serge | 1596 | //ucMiscInfo: also changed, see below |
1117 | serge | 1597 | #define PIXEL_CLOCK_MISC_FORCE_PROG_PPLL 0x01 |
1598 | #define PIXEL_CLOCK_MISC_VGA_MODE 0x02 |
||
1599 | #define PIXEL_CLOCK_MISC_CRTC_SEL_MASK 0x04 |
||
1600 | #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC1 0x00 |
||
1601 | #define PIXEL_CLOCK_MISC_CRTC_SEL_CRTC2 0x04 |
||
1602 | #define PIXEL_CLOCK_MISC_USE_ENGINE_FOR_DISPCLK 0x08 |
||
1430 | serge | 1603 | #define PIXEL_CLOCK_MISC_REF_DIV_SRC 0x10 |
1604 | // V1.4 for RoadRunner |
||
1605 | #define PIXEL_CLOCK_V4_MISC_SS_ENABLE 0x10 |
||
1606 | #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE 0x20 |
||
1117 | serge | 1607 | |
1963 | serge | 1608 | |
1430 | serge | 1609 | typedef struct _PIXEL_CLOCK_PARAMETERS_V3 |
1610 | { |
||
1611 | USHORT usPixelClock; // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div) |
||
1612 | // 0 means disable PPLL. For VGA PPLL,make sure this value is not 0. |
||
1613 | USHORT usRefDiv; // Reference divider |
||
1614 | USHORT usFbDiv; // feedback divider |
||
1615 | UCHAR ucPostDiv; // post divider |
||
1616 | UCHAR ucFracFbDiv; // fractional feedback divider |
||
1617 | UCHAR ucPpll; // ATOM_PPLL1 or ATOM_PPL2 |
||
1618 | UCHAR ucTransmitterId; // graphic encoder id defined in objectId.h |
||
1619 | union |
||
1620 | { |
||
1621 | UCHAR ucEncoderMode; // encoder type defined as ATOM_ENCODER_MODE_DP/DVI/HDMI/ |
||
1622 | UCHAR ucDVOConfig; // when use DVO, need to know SDR/DDR, 12bit or 24bit |
||
1117 | serge | 1623 | }; |
1430 | serge | 1624 | UCHAR ucMiscInfo; // bit[0]=Force program, bit[1]= set pclk for VGA, b[2]= CRTC sel |
1625 | // bit[3]=0:use PPLL for dispclk source, =1: use engine clock for dispclock source |
||
1626 | // bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the source of reference divider |
||
1627 | }PIXEL_CLOCK_PARAMETERS_V3; |
||
1117 | serge | 1628 | |
1629 | #define PIXEL_CLOCK_PARAMETERS_LAST PIXEL_CLOCK_PARAMETERS_V2 |
||
1630 | #define GET_PIXEL_CLOCK_PS_ALLOCATION PIXEL_CLOCK_PARAMETERS_LAST |
||
1631 | |||
1430 | serge | 1632 | typedef struct _PIXEL_CLOCK_PARAMETERS_V5 |
1633 | { |
||
1634 | UCHAR ucCRTC; // ATOM_CRTC1~6, indicate the CRTC controller to |
||
1635 | // drive the pixel clock. not used for DCPLL case. |
||
1636 | union{ |
||
1637 | UCHAR ucReserved; |
||
1638 | UCHAR ucFracFbDiv; // [gphan] temporary to prevent build problem. remove it after driver code is changed. |
||
1639 | }; |
||
1640 | USHORT usPixelClock; // target the pixel clock to drive the CRTC timing |
||
1641 | // 0 means disable PPLL/DCPLL. |
||
1642 | USHORT usFbDiv; // feedback divider integer part. |
||
1643 | UCHAR ucPostDiv; // post divider. |
||
1644 | UCHAR ucRefDiv; // Reference divider |
||
1645 | UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL |
||
1646 | UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h, |
||
1647 | // indicate which graphic encoder will be used. |
||
1648 | UCHAR ucEncoderMode; // Encoder mode: |
||
1649 | UCHAR ucMiscInfo; // bit[0]= Force program PPLL |
||
1650 | // bit[1]= when VGA timing is used. |
||
1651 | // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp |
||
1652 | // bit[4]= RefClock source for PPLL. |
||
1653 | // =0: XTLAIN( default mode ) |
||
1654 | // =1: other external clock source, which is pre-defined |
||
1655 | // by VBIOS depend on the feature required. |
||
1656 | // bit[7:5]: reserved. |
||
1657 | ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 ) |
||
1658 | |||
1659 | }PIXEL_CLOCK_PARAMETERS_V5; |
||
1660 | |||
1661 | #define PIXEL_CLOCK_V5_MISC_FORCE_PROG_PPLL 0x01 |
||
1662 | #define PIXEL_CLOCK_V5_MISC_VGA_MODE 0x02 |
||
1663 | #define PIXEL_CLOCK_V5_MISC_HDMI_BPP_MASK 0x0c |
||
1664 | #define PIXEL_CLOCK_V5_MISC_HDMI_24BPP 0x00 |
||
1665 | #define PIXEL_CLOCK_V5_MISC_HDMI_30BPP 0x04 |
||
1666 | #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP 0x08 |
||
1667 | #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC 0x10 |
||
1668 | |||
1963 | serge | 1669 | typedef struct _CRTC_PIXEL_CLOCK_FREQ |
1670 | { |
||
1671 | #if ATOM_BIG_ENDIAN |
||
1672 | ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to |
||
1673 | // drive the pixel clock. not used for DCPLL case. |
||
1674 | ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. |
||
1675 | // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. |
||
1676 | #else |
||
1677 | ULONG ulPixelClock:24; // target the pixel clock to drive the CRTC timing. |
||
1678 | // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version. |
||
1679 | ULONG ucCRTC:8; // ATOM_CRTC1~6, indicate the CRTC controller to |
||
1680 | // drive the pixel clock. not used for DCPLL case. |
||
1681 | #endif |
||
1682 | }CRTC_PIXEL_CLOCK_FREQ; |
||
1683 | |||
1684 | typedef struct _PIXEL_CLOCK_PARAMETERS_V6 |
||
1685 | { |
||
1686 | union{ |
||
1687 | CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq; // pixel clock and CRTC id frequency |
||
1688 | ULONG ulDispEngClkFreq; // dispclk frequency |
||
1689 | }; |
||
1690 | USHORT usFbDiv; // feedback divider integer part. |
||
1691 | UCHAR ucPostDiv; // post divider. |
||
1692 | UCHAR ucRefDiv; // Reference divider |
||
1693 | UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL |
||
1694 | UCHAR ucTransmitterID; // ASIC encoder id defined in objectId.h, |
||
1695 | // indicate which graphic encoder will be used. |
||
1696 | UCHAR ucEncoderMode; // Encoder mode: |
||
1697 | UCHAR ucMiscInfo; // bit[0]= Force program PPLL |
||
1698 | // bit[1]= when VGA timing is used. |
||
1699 | // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp |
||
1700 | // bit[4]= RefClock source for PPLL. |
||
1701 | // =0: XTLAIN( default mode ) |
||
1702 | // =1: other external clock source, which is pre-defined |
||
1703 | // by VBIOS depend on the feature required. |
||
1704 | // bit[7:5]: reserved. |
||
1705 | ULONG ulFbDivDecFrac; // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 ) |
||
1706 | |||
1707 | }PIXEL_CLOCK_PARAMETERS_V6; |
||
1708 | |||
1709 | #define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL 0x01 |
||
1710 | #define PIXEL_CLOCK_V6_MISC_VGA_MODE 0x02 |
||
1711 | #define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK 0x0c |
||
1712 | #define PIXEL_CLOCK_V6_MISC_HDMI_24BPP 0x00 |
||
1713 | #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP 0x04 |
||
5078 | serge | 1714 | #define PIXEL_CLOCK_V6_MISC_HDMI_36BPP_V6 0x08 //for V6, the correct defintion for 36bpp should be 2 for 36bpp(2:1) |
1963 | serge | 1715 | #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP 0x08 |
5078 | serge | 1716 | #define PIXEL_CLOCK_V6_MISC_HDMI_30BPP_V6 0x04 //for V6, the correct defintion for 30bpp should be 1 for 36bpp(5:4) |
1963 | serge | 1717 | #define PIXEL_CLOCK_V6_MISC_HDMI_48BPP 0x0c |
1718 | #define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC 0x10 |
||
5078 | serge | 1719 | #define PIXEL_CLOCK_V6_MISC_GEN_DPREFCLK 0x40 |
1963 | serge | 1720 | |
1430 | serge | 1721 | typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2 |
1722 | { |
||
1723 | PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput; |
||
1724 | }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2; |
||
1725 | |||
1726 | typedef struct _GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2 |
||
1727 | { |
||
1728 | UCHAR ucStatus; |
||
1729 | UCHAR ucRefDivSrc; // =1: reference clock source from XTALIN, =0: source from PCIE ref clock |
||
1730 | UCHAR ucReserved[2]; |
||
1731 | }GET_DISP_PLL_STATUS_OUTPUT_PARAMETERS_V2; |
||
1732 | |||
1733 | typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3 |
||
1734 | { |
||
1735 | PIXEL_CLOCK_PARAMETERS_V5 sDispClkInput; |
||
1736 | }GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V3; |
||
1737 | |||
6104 | serge | 1738 | /****************************************************************************/ |
1430 | serge | 1739 | // Structures used by AdjustDisplayPllTable |
6104 | serge | 1740 | /****************************************************************************/ |
1430 | serge | 1741 | typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS |
1742 | { |
||
1117 | serge | 1743 | USHORT usPixelClock; |
1744 | UCHAR ucTransmitterID; |
||
1745 | UCHAR ucEncodeMode; |
||
1430 | serge | 1746 | union |
1747 | { |
||
1748 | UCHAR ucDVOConfig; //if DVO, need passing link rate and output 12bitlow or 24bit |
||
1749 | UCHAR ucConfig; //if none DVO, not defined yet |
||
1117 | serge | 1750 | }; |
1751 | UCHAR ucReserved[3]; |
||
1430 | serge | 1752 | }ADJUST_DISPLAY_PLL_PARAMETERS; |
1117 | serge | 1753 | |
1754 | #define ADJUST_DISPLAY_CONFIG_SS_ENABLE 0x10 |
||
1755 | #define ADJUST_DISPLAY_PLL_PS_ALLOCATION ADJUST_DISPLAY_PLL_PARAMETERS |
||
1756 | |||
1430 | serge | 1757 | typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 |
1758 | { |
||
1759 | USHORT usPixelClock; // target pixel clock |
||
1963 | serge | 1760 | UCHAR ucTransmitterID; // GPU transmitter id defined in objectid.h |
1430 | serge | 1761 | UCHAR ucEncodeMode; // encoder mode: CRT, LVDS, DP, TMDS or HDMI |
1762 | UCHAR ucDispPllConfig; // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX |
||
1963 | serge | 1763 | UCHAR ucExtTransmitterID; // external encoder id. |
1764 | UCHAR ucReserved[2]; |
||
1430 | serge | 1765 | }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3; |
1766 | |||
1767 | // usDispPllConfig v1.2 for RoadRunner |
||
1768 | #define DISPPLL_CONFIG_DVO_RATE_SEL 0x0001 // need only when ucTransmitterID = DVO |
||
1769 | #define DISPPLL_CONFIG_DVO_DDR_SPEED 0x0000 // need only when ucTransmitterID = DVO |
||
1770 | #define DISPPLL_CONFIG_DVO_SDR_SPEED 0x0001 // need only when ucTransmitterID = DVO |
||
1771 | #define DISPPLL_CONFIG_DVO_OUTPUT_SEL 0x000c // need only when ucTransmitterID = DVO |
||
1772 | #define DISPPLL_CONFIG_DVO_LOW12BIT 0x0000 // need only when ucTransmitterID = DVO |
||
1773 | #define DISPPLL_CONFIG_DVO_UPPER12BIT 0x0004 // need only when ucTransmitterID = DVO |
||
1774 | #define DISPPLL_CONFIG_DVO_24BIT 0x0008 // need only when ucTransmitterID = DVO |
||
1775 | #define DISPPLL_CONFIG_SS_ENABLE 0x0010 // Only used when ucEncoderMode = DP or LVDS |
||
1776 | #define DISPPLL_CONFIG_COHERENT_MODE 0x0020 // Only used when ucEncoderMode = TMDS or HDMI |
||
1777 | #define DISPPLL_CONFIG_DUAL_LINK 0x0040 // Only used when ucEncoderMode = TMDS or LVDS |
||
1778 | |||
1779 | |||
1780 | typedef struct _ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 |
||
1781 | { |
||
1782 | ULONG ulDispPllFreq; // return display PPLL freq which is used to generate the pixclock, and related idclk, symclk etc |
||
1783 | UCHAR ucRefDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider and post_div ( if it is not given ) |
||
1784 | UCHAR ucPostDiv; // if it is none-zero, it is used to be calculated the other ppll parameter fb_divider |
||
1785 | UCHAR ucReserved[2]; |
||
1786 | }ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3; |
||
1787 | |||
1788 | typedef struct _ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3 |
||
1789 | { |
||
1790 | union |
||
1791 | { |
||
1792 | ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3 sInput; |
||
1793 | ADJUST_DISPLAY_PLL_OUTPUT_PARAMETERS_V3 sOutput; |
||
1794 | }; |
||
1795 | } ADJUST_DISPLAY_PLL_PS_ALLOCATION_V3; |
||
1796 | |||
6104 | serge | 1797 | /****************************************************************************/ |
1430 | serge | 1798 | // Structures used by EnableYUVTable |
6104 | serge | 1799 | /****************************************************************************/ |
1430 | serge | 1800 | typedef struct _ENABLE_YUV_PARAMETERS |
1801 | { |
||
1802 | UCHAR ucEnable; // ATOM_ENABLE:Enable YUV or ATOM_DISABLE:Disable YUV (RGB) |
||
1803 | UCHAR ucCRTC; // Which CRTC needs this YUV or RGB format |
||
6104 | serge | 1804 | UCHAR ucPadding[2]; |
1430 | serge | 1805 | }ENABLE_YUV_PARAMETERS; |
1117 | serge | 1806 | #define ENABLE_YUV_PS_ALLOCATION ENABLE_YUV_PARAMETERS |
1807 | |||
6104 | serge | 1808 | /****************************************************************************/ |
1430 | serge | 1809 | // Structures used by GetMemoryClockTable |
6104 | serge | 1810 | /****************************************************************************/ |
1430 | serge | 1811 | typedef struct _GET_MEMORY_CLOCK_PARAMETERS |
1812 | { |
||
1813 | ULONG ulReturnMemoryClock; // current memory speed in 10KHz unit |
||
1117 | serge | 1814 | } GET_MEMORY_CLOCK_PARAMETERS; |
1815 | #define GET_MEMORY_CLOCK_PS_ALLOCATION GET_MEMORY_CLOCK_PARAMETERS |
||
1816 | |||
6104 | serge | 1817 | /****************************************************************************/ |
1430 | serge | 1818 | // Structures used by GetEngineClockTable |
6104 | serge | 1819 | /****************************************************************************/ |
1430 | serge | 1820 | typedef struct _GET_ENGINE_CLOCK_PARAMETERS |
1821 | { |
||
1822 | ULONG ulReturnEngineClock; // current engine speed in 10KHz unit |
||
1117 | serge | 1823 | } GET_ENGINE_CLOCK_PARAMETERS; |
1824 | #define GET_ENGINE_CLOCK_PS_ALLOCATION GET_ENGINE_CLOCK_PARAMETERS |
||
1825 | |||
6104 | serge | 1826 | /****************************************************************************/ |
1430 | serge | 1827 | // Following Structures and constant may be obsolete |
6104 | serge | 1828 | /****************************************************************************/ |
1430 | serge | 1829 | //Maxium 8 bytes,the data read in will be placed in the parameter space. |
1830 | //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed |
||
1831 | typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS |
||
1832 | { |
||
1833 | USHORT usPrescale; //Ratio between Engine clock and I2C clock |
||
1963 | serge | 1834 | USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID |
1430 | serge | 1835 | USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status |
1836 | //WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte |
||
1837 | UCHAR ucSlaveAddr; //Read from which slave |
||
1838 | UCHAR ucLineNumber; //Read from which HW assisted line |
||
1839 | }READ_EDID_FROM_HW_I2C_DATA_PARAMETERS; |
||
1117 | serge | 1840 | #define READ_EDID_FROM_HW_I2C_DATA_PS_ALLOCATION READ_EDID_FROM_HW_I2C_DATA_PARAMETERS |
1841 | |||
1430 | serge | 1842 | |
1117 | serge | 1843 | #define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSDATABYTE 0 |
1844 | #define ATOM_WRITE_I2C_FORMAT_PSOFFSET_PSTWODATABYTES 1 |
||
1845 | #define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_PSOFFSET_IDDATABLOCK 2 |
||
1846 | #define ATOM_WRITE_I2C_FORMAT_PSCOUNTER_IDOFFSET_PLUS_IDDATABLOCK 3 |
||
1847 | #define ATOM_WRITE_I2C_FORMAT_IDCOUNTER_IDOFFSET_IDDATABLOCK 4 |
||
1848 | |||
1430 | serge | 1849 | typedef struct _WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS |
1850 | { |
||
1851 | USHORT usPrescale; //Ratio between Engine clock and I2C clock |
||
1852 | USHORT usByteOffset; //Write to which byte |
||
1853 | //Upper portion of usByteOffset is Format of data |
||
1854 | //1bytePS+offsetPS |
||
1855 | //2bytesPS+offsetPS |
||
1856 | //blockID+offsetPS |
||
1857 | //blockID+offsetID |
||
1858 | //blockID+counterID+offsetID |
||
1859 | UCHAR ucData; //PS data1 |
||
1860 | UCHAR ucStatus; //Status byte 1=success, 2=failure, Also is used as PS data2 |
||
1861 | UCHAR ucSlaveAddr; //Write to which slave |
||
1862 | UCHAR ucLineNumber; //Write from which HW assisted line |
||
1863 | }WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS; |
||
1117 | serge | 1864 | |
1865 | #define WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS |
||
1866 | |||
1430 | serge | 1867 | typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS |
1868 | { |
||
1869 | USHORT usPrescale; //Ratio between Engine clock and I2C clock |
||
1870 | UCHAR ucSlaveAddr; //Write to which slave |
||
1871 | UCHAR ucLineNumber; //Write from which HW assisted line |
||
1872 | }SET_UP_HW_I2C_DATA_PARAMETERS; |
||
1117 | serge | 1873 | |
1430 | serge | 1874 | |
1117 | serge | 1875 | /**************************************************************************/ |
1876 | #define SPEED_FAN_CONTROL_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS |
||
1877 | |||
1963 | serge | 1878 | |
6104 | serge | 1879 | /****************************************************************************/ |
1430 | serge | 1880 | // Structures used by PowerConnectorDetectionTable |
6104 | serge | 1881 | /****************************************************************************/ |
1430 | serge | 1882 | typedef struct _POWER_CONNECTOR_DETECTION_PARAMETERS |
1883 | { |
||
1884 | UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected |
||
6104 | serge | 1885 | UCHAR ucPwrBehaviorId; |
1430 | serge | 1886 | USHORT usPwrBudget; //how much power currently boot to in unit of watt |
1887 | }POWER_CONNECTOR_DETECTION_PARAMETERS; |
||
1117 | serge | 1888 | |
1430 | serge | 1889 | typedef struct POWER_CONNECTOR_DETECTION_PS_ALLOCATION |
1890 | { |
||
1891 | UCHAR ucPowerConnectorStatus; //Used for return value 0: detected, 1:not detected |
||
6104 | serge | 1892 | UCHAR ucReserved; |
1430 | serge | 1893 | USHORT usPwrBudget; //how much power currently boot to in unit of watt |
6104 | serge | 1894 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; |
1430 | serge | 1895 | }POWER_CONNECTOR_DETECTION_PS_ALLOCATION; |
1117 | serge | 1896 | |
1897 | /****************************LVDS SS Command Table Definitions**********************/ |
||
1898 | |||
6104 | serge | 1899 | /****************************************************************************/ |
1430 | serge | 1900 | // Structures used by EnableSpreadSpectrumOnPPLLTable |
6104 | serge | 1901 | /****************************************************************************/ |
1430 | serge | 1902 | typedef struct _ENABLE_LVDS_SS_PARAMETERS |
1903 | { |
||
6104 | serge | 1904 | USHORT usSpreadSpectrumPercentage; |
1430 | serge | 1905 | UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD |
1906 | UCHAR ucSpreadSpectrumStepSize_Delay; //bits3:2 SS_STEP_SIZE; bit 6:4 SS_DELAY |
||
1907 | UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 1908 | UCHAR ucPadding[3]; |
1430 | serge | 1909 | }ENABLE_LVDS_SS_PARAMETERS; |
1117 | serge | 1910 | |
1430 | serge | 1911 | //ucTableFormatRevision=1,ucTableContentRevision=2 |
1912 | typedef struct _ENABLE_LVDS_SS_PARAMETERS_V2 |
||
1913 | { |
||
6104 | serge | 1914 | USHORT usSpreadSpectrumPercentage; |
1430 | serge | 1915 | UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD |
1916 | UCHAR ucSpreadSpectrumStep; // |
||
1917 | UCHAR ucEnable; //ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 1918 | UCHAR ucSpreadSpectrumDelay; |
1919 | UCHAR ucSpreadSpectrumRange; |
||
1920 | UCHAR ucPadding; |
||
1430 | serge | 1921 | }ENABLE_LVDS_SS_PARAMETERS_V2; |
1117 | serge | 1922 | |
1430 | serge | 1923 | //This new structure is based on ENABLE_LVDS_SS_PARAMETERS but expands to SS on PPLL, so other devices can use SS. |
1924 | typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL |
||
1925 | { |
||
6104 | serge | 1926 | USHORT usSpreadSpectrumPercentage; |
1430 | serge | 1927 | UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Others:TBD |
1928 | UCHAR ucSpreadSpectrumStep; // |
||
1929 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 1930 | UCHAR ucSpreadSpectrumDelay; |
1931 | UCHAR ucSpreadSpectrumRange; |
||
1430 | serge | 1932 | UCHAR ucPpll; // ATOM_PPLL1/ATOM_PPLL2 |
1933 | }ENABLE_SPREAD_SPECTRUM_ON_PPLL; |
||
1117 | serge | 1934 | |
1430 | serge | 1935 | typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2 |
1936 | { |
||
1937 | USHORT usSpreadSpectrumPercentage; |
||
1938 | UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread. |
||
1939 | // Bit[1]: 1-Ext. 0-Int. |
||
1940 | // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL |
||
1941 | // Bits[7:4] reserved |
||
1942 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
1943 | USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8] |
||
1944 | USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC |
||
1945 | }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2; |
||
1946 | |||
1947 | #define ATOM_PPLL_SS_TYPE_V2_DOWN_SPREAD 0x00 |
||
1948 | #define ATOM_PPLL_SS_TYPE_V2_CENTRE_SPREAD 0x01 |
||
1949 | #define ATOM_PPLL_SS_TYPE_V2_EXT_SPREAD 0x02 |
||
1950 | #define ATOM_PPLL_SS_TYPE_V2_PPLL_SEL_MASK 0x0c |
||
1951 | #define ATOM_PPLL_SS_TYPE_V2_P1PLL 0x00 |
||
1952 | #define ATOM_PPLL_SS_TYPE_V2_P2PLL 0x04 |
||
1953 | #define ATOM_PPLL_SS_TYPE_V2_DCPLL 0x08 |
||
1954 | #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_MASK 0x00FF |
||
1955 | #define ATOM_PPLL_SS_AMOUNT_V2_FBDIV_SHIFT 0 |
||
1956 | #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK 0x0F00 |
||
1957 | #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT 8 |
||
1958 | |||
1963 | serge | 1959 | // Used by DCE5.0 |
1960 | typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3 |
||
1961 | { |
||
1962 | USHORT usSpreadSpectrumAmountFrac; // SS_AMOUNT_DSFRAC New in DCE5.0 |
||
1963 | UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread. |
||
1964 | // Bit[1]: 1-Ext. 0-Int. |
||
1965 | // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL |
||
1966 | // Bits[7:4] reserved |
||
1967 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
1968 | USHORT usSpreadSpectrumAmount; // Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8] |
||
1969 | USHORT usSpreadSpectrumStep; // SS_STEP_SIZE_DSFRAC |
||
1970 | }ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3; |
||
1971 | |||
1972 | #define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD 0x00 |
||
1973 | #define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD 0x01 |
||
1974 | #define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD 0x02 |
||
1975 | #define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK 0x0c |
||
1976 | #define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00 |
||
1977 | #define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04 |
||
1978 | #define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08 |
||
2997 | Serge | 1979 | #define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL |
1963 | serge | 1980 | #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF |
1981 | #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0 |
||
1982 | #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00 |
||
1983 | #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT 8 |
||
1984 | |||
1117 | serge | 1985 | #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION ENABLE_SPREAD_SPECTRUM_ON_PPLL |
1986 | |||
1987 | /**************************************************************************/ |
||
1988 | |||
1430 | serge | 1989 | typedef struct _SET_PIXEL_CLOCK_PS_ALLOCATION |
1990 | { |
||
6104 | serge | 1991 | PIXEL_CLOCK_PARAMETERS sPCLKInput; |
1430 | serge | 1992 | ENABLE_SPREAD_SPECTRUM_ON_PPLL sReserved;//Caller doesn't need to init this portion |
1993 | }SET_PIXEL_CLOCK_PS_ALLOCATION; |
||
1117 | serge | 1994 | |
1995 | #define ENABLE_VGA_RENDER_PS_ALLOCATION SET_PIXEL_CLOCK_PS_ALLOCATION |
||
1996 | |||
6104 | serge | 1997 | /****************************************************************************/ |
1430 | serge | 1998 | // Structures used by ### |
6104 | serge | 1999 | /****************************************************************************/ |
1430 | serge | 2000 | typedef struct _MEMORY_TRAINING_PARAMETERS |
2001 | { |
||
2002 | ULONG ulTargetMemoryClock; //In 10Khz unit |
||
2003 | }MEMORY_TRAINING_PARAMETERS; |
||
1117 | serge | 2004 | #define MEMORY_TRAINING_PS_ALLOCATION MEMORY_TRAINING_PARAMETERS |
2005 | |||
1430 | serge | 2006 | |
1117 | serge | 2007 | /****************************LVDS and other encoder command table definitions **********************/ |
2008 | |||
1430 | serge | 2009 | |
2010 | /****************************************************************************/ |
||
2011 | // Structures used by LVDSEncoderControlTable (Before DCE30) |
||
2012 | // LVTMAEncoderControlTable (Before DCE30) |
||
2013 | // TMDSAEncoderControlTable (Before DCE30) |
||
6104 | serge | 2014 | /****************************************************************************/ |
1430 | serge | 2015 | typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS |
2016 | { |
||
2017 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
2018 | UCHAR ucMisc; // bit0=0: Enable single link |
||
2019 | // =1: Enable dual link |
||
2020 | // Bit1=0: 666RGB |
||
2021 | // =1: 888RGB |
||
2022 | UCHAR ucAction; // 0: turn off encoder |
||
2023 | // 1: setup and turn on encoder |
||
2024 | }LVDS_ENCODER_CONTROL_PARAMETERS; |
||
1117 | serge | 2025 | |
2026 | #define LVDS_ENCODER_CONTROL_PS_ALLOCATION LVDS_ENCODER_CONTROL_PARAMETERS |
||
6104 | serge | 2027 | |
1117 | serge | 2028 | #define TMDS1_ENCODER_CONTROL_PARAMETERS LVDS_ENCODER_CONTROL_PARAMETERS |
2029 | #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION TMDS1_ENCODER_CONTROL_PARAMETERS |
||
2030 | |||
2031 | #define TMDS2_ENCODER_CONTROL_PARAMETERS TMDS1_ENCODER_CONTROL_PARAMETERS |
||
2032 | #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION TMDS2_ENCODER_CONTROL_PARAMETERS |
||
2033 | |||
2034 | |||
1430 | serge | 2035 | //ucTableFormatRevision=1,ucTableContentRevision=2 |
2036 | typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 |
||
2037 | { |
||
2038 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
2039 | UCHAR ucMisc; // see PANEL_ENCODER_MISC_xx defintions below |
||
2040 | UCHAR ucAction; // 0: turn off encoder |
||
2041 | // 1: setup and turn on encoder |
||
2042 | UCHAR ucTruncate; // bit0=0: Disable truncate |
||
2043 | // =1: Enable truncate |
||
2044 | // bit4=0: 666RGB |
||
2045 | // =1: 888RGB |
||
2046 | UCHAR ucSpatial; // bit0=0: Disable spatial dithering |
||
2047 | // =1: Enable spatial dithering |
||
2048 | // bit4=0: 666RGB |
||
2049 | // =1: 888RGB |
||
2050 | UCHAR ucTemporal; // bit0=0: Disable temporal dithering |
||
2051 | // =1: Enable temporal dithering |
||
2052 | // bit4=0: 666RGB |
||
2053 | // =1: 888RGB |
||
2054 | // bit5=0: Gray level 2 |
||
2055 | // =1: Gray level 4 |
||
2056 | UCHAR ucFRC; // bit4=0: 25FRC_SEL pattern E |
||
2057 | // =1: 25FRC_SEL pattern F |
||
2058 | // bit6:5=0: 50FRC_SEL pattern A |
||
2059 | // =1: 50FRC_SEL pattern B |
||
2060 | // =2: 50FRC_SEL pattern C |
||
2061 | // =3: 50FRC_SEL pattern D |
||
2062 | // bit7=0: 75FRC_SEL pattern E |
||
2063 | // =1: 75FRC_SEL pattern F |
||
2064 | }LVDS_ENCODER_CONTROL_PARAMETERS_V2; |
||
2065 | |||
1117 | serge | 2066 | #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 |
6104 | serge | 2067 | |
1117 | serge | 2068 | #define TMDS1_ENCODER_CONTROL_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 |
2069 | #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 |
||
6104 | serge | 2070 | |
1117 | serge | 2071 | #define TMDS2_ENCODER_CONTROL_PARAMETERS_V2 TMDS1_ENCODER_CONTROL_PARAMETERS_V2 |
2072 | #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V2 TMDS2_ENCODER_CONTROL_PARAMETERS_V2 |
||
2073 | |||
2074 | #define LVDS_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V2 |
||
2075 | #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
||
2076 | |||
2077 | #define TMDS1_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
||
2078 | #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS1_ENCODER_CONTROL_PARAMETERS_V3 |
||
2079 | |||
2080 | #define TMDS2_ENCODER_CONTROL_PARAMETERS_V3 LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
||
2081 | #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_V3 TMDS2_ENCODER_CONTROL_PARAMETERS_V3 |
||
2082 | |||
6104 | serge | 2083 | /****************************************************************************/ |
1430 | serge | 2084 | // Structures used by ### |
6104 | serge | 2085 | /****************************************************************************/ |
1430 | serge | 2086 | typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS |
2087 | { |
||
2088 | UCHAR ucEnable; // Enable or Disable External TMDS encoder |
||
2089 | UCHAR ucMisc; // Bit0=0:Enable Single link;=1:Enable Dual link;Bit1 {=0:666RGB, =1:888RGB} |
||
6104 | serge | 2090 | UCHAR ucPadding[2]; |
1430 | serge | 2091 | }ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS; |
1117 | serge | 2092 | |
1430 | serge | 2093 | typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION |
2094 | { |
||
6104 | serge | 2095 | ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS sXTmdsEncoder; |
1430 | serge | 2096 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion |
2097 | }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION; |
||
1117 | serge | 2098 | |
2099 | #define ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 LVDS_ENCODER_CONTROL_PARAMETERS_V2 |
||
2100 | |||
1430 | serge | 2101 | typedef struct _ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2 |
2102 | { |
||
6104 | serge | 2103 | ENABLE_EXTERNAL_TMDS_ENCODER_PARAMETERS_V2 sXTmdsEncoder; |
1430 | serge | 2104 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion |
2105 | }ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION_V2; |
||
1117 | serge | 2106 | |
1430 | serge | 2107 | typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION |
2108 | { |
||
6104 | serge | 2109 | DIG_ENCODER_CONTROL_PARAMETERS sDigEncoder; |
2110 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; |
||
1430 | serge | 2111 | }EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION; |
1117 | serge | 2112 | |
6104 | serge | 2113 | /****************************************************************************/ |
1430 | serge | 2114 | // Structures used by DVOEncoderControlTable |
6104 | serge | 2115 | /****************************************************************************/ |
1430 | serge | 2116 | //ucTableFormatRevision=1,ucTableContentRevision=3 |
1117 | serge | 2117 | |
1430 | serge | 2118 | //ucDVOConfig: |
1117 | serge | 2119 | #define DVO_ENCODER_CONFIG_RATE_SEL 0x01 |
2120 | #define DVO_ENCODER_CONFIG_DDR_SPEED 0x00 |
||
2121 | #define DVO_ENCODER_CONFIG_SDR_SPEED 0x01 |
||
2122 | #define DVO_ENCODER_CONFIG_OUTPUT_SEL 0x0c |
||
2123 | #define DVO_ENCODER_CONFIG_LOW12BIT 0x00 |
||
2124 | #define DVO_ENCODER_CONFIG_UPPER12BIT 0x04 |
||
2125 | #define DVO_ENCODER_CONFIG_24BIT 0x08 |
||
2126 | |||
1430 | serge | 2127 | typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V3 |
2128 | { |
||
6104 | serge | 2129 | USHORT usPixelClock; |
2130 | UCHAR ucDVOConfig; |
||
1430 | serge | 2131 | UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT |
6104 | serge | 2132 | UCHAR ucReseved[4]; |
1430 | serge | 2133 | }DVO_ENCODER_CONTROL_PARAMETERS_V3; |
1117 | serge | 2134 | #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 DVO_ENCODER_CONTROL_PARAMETERS_V3 |
2135 | |||
5078 | serge | 2136 | typedef struct _DVO_ENCODER_CONTROL_PARAMETERS_V1_4 |
2137 | { |
||
2138 | USHORT usPixelClock; |
||
2139 | UCHAR ucDVOConfig; |
||
2140 | UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT |
||
2141 | UCHAR ucBitPerColor; //please refer to definition of PANEL_xBIT_PER_COLOR |
||
2142 | UCHAR ucReseved[3]; |
||
2143 | }DVO_ENCODER_CONTROL_PARAMETERS_V1_4; |
||
2144 | #define DVO_ENCODER_CONTROL_PS_ALLOCATION_V1_4 DVO_ENCODER_CONTROL_PARAMETERS_V1_4 |
||
2145 | |||
2146 | |||
1430 | serge | 2147 | //ucTableFormatRevision=1 |
2148 | //ucTableContentRevision=3 structure is not changed but usMisc add bit 1 as another input for |
||
2149 | // bit1=0: non-coherent mode |
||
2150 | // =1: coherent mode |
||
1117 | serge | 2151 | |
1430 | serge | 2152 | //========================================================================================== |
2153 | //Only change is here next time when changing encoder parameter definitions again! |
||
1117 | serge | 2154 | #define LVDS_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
2155 | #define LVDS_ENCODER_CONTROL_PS_ALLOCATION_LAST LVDS_ENCODER_CONTROL_PARAMETERS_LAST |
||
2156 | |||
2157 | #define TMDS1_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
||
2158 | #define TMDS1_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS1_ENCODER_CONTROL_PARAMETERS_LAST |
||
2159 | |||
2160 | #define TMDS2_ENCODER_CONTROL_PARAMETERS_LAST LVDS_ENCODER_CONTROL_PARAMETERS_V3 |
||
2161 | #define TMDS2_ENCODER_CONTROL_PS_ALLOCATION_LAST TMDS2_ENCODER_CONTROL_PARAMETERS_LAST |
||
2162 | |||
2163 | #define DVO_ENCODER_CONTROL_PARAMETERS_LAST DVO_ENCODER_CONTROL_PARAMETERS |
||
2164 | #define DVO_ENCODER_CONTROL_PS_ALLOCATION_LAST DVO_ENCODER_CONTROL_PS_ALLOCATION |
||
2165 | |||
1430 | serge | 2166 | //========================================================================================== |
1117 | serge | 2167 | #define PANEL_ENCODER_MISC_DUAL 0x01 |
2168 | #define PANEL_ENCODER_MISC_COHERENT 0x02 |
||
2169 | #define PANEL_ENCODER_MISC_TMDS_LINKB 0x04 |
||
2170 | #define PANEL_ENCODER_MISC_HDMI_TYPE 0x08 |
||
2171 | |||
2172 | #define PANEL_ENCODER_ACTION_DISABLE ATOM_DISABLE |
||
2173 | #define PANEL_ENCODER_ACTION_ENABLE ATOM_ENABLE |
||
2174 | #define PANEL_ENCODER_ACTION_COHERENTSEQ (ATOM_ENABLE+1) |
||
2175 | |||
2176 | #define PANEL_ENCODER_TRUNCATE_EN 0x01 |
||
2177 | #define PANEL_ENCODER_TRUNCATE_DEPTH 0x10 |
||
2178 | #define PANEL_ENCODER_SPATIAL_DITHER_EN 0x01 |
||
2179 | #define PANEL_ENCODER_SPATIAL_DITHER_DEPTH 0x10 |
||
2180 | #define PANEL_ENCODER_TEMPORAL_DITHER_EN 0x01 |
||
2181 | #define PANEL_ENCODER_TEMPORAL_DITHER_DEPTH 0x10 |
||
2182 | #define PANEL_ENCODER_TEMPORAL_LEVEL_4 0x20 |
||
2183 | #define PANEL_ENCODER_25FRC_MASK 0x10 |
||
2184 | #define PANEL_ENCODER_25FRC_E 0x00 |
||
2185 | #define PANEL_ENCODER_25FRC_F 0x10 |
||
2186 | #define PANEL_ENCODER_50FRC_MASK 0x60 |
||
2187 | #define PANEL_ENCODER_50FRC_A 0x00 |
||
2188 | #define PANEL_ENCODER_50FRC_B 0x20 |
||
2189 | #define PANEL_ENCODER_50FRC_C 0x40 |
||
2190 | #define PANEL_ENCODER_50FRC_D 0x60 |
||
2191 | #define PANEL_ENCODER_75FRC_MASK 0x80 |
||
2192 | #define PANEL_ENCODER_75FRC_E 0x00 |
||
2193 | #define PANEL_ENCODER_75FRC_F 0x80 |
||
2194 | |||
6104 | serge | 2195 | /****************************************************************************/ |
1430 | serge | 2196 | // Structures used by SetVoltageTable |
6104 | serge | 2197 | /****************************************************************************/ |
1117 | serge | 2198 | #define SET_VOLTAGE_TYPE_ASIC_VDDC 1 |
2199 | #define SET_VOLTAGE_TYPE_ASIC_MVDDC 2 |
||
2200 | #define SET_VOLTAGE_TYPE_ASIC_MVDDQ 3 |
||
2201 | #define SET_VOLTAGE_TYPE_ASIC_VDDCI 4 |
||
2202 | #define SET_VOLTAGE_INIT_MODE 5 |
||
1430 | serge | 2203 | #define SET_VOLTAGE_GET_MAX_VOLTAGE 6 //Gets the Max. voltage for the soldered Asic |
1117 | serge | 2204 | |
2205 | #define SET_ASIC_VOLTAGE_MODE_ALL_SOURCE 0x1 |
||
2206 | #define SET_ASIC_VOLTAGE_MODE_SOURCE_A 0x2 |
||
2207 | #define SET_ASIC_VOLTAGE_MODE_SOURCE_B 0x4 |
||
2208 | |||
2209 | #define SET_ASIC_VOLTAGE_MODE_SET_VOLTAGE 0x0 |
||
2210 | #define SET_ASIC_VOLTAGE_MODE_GET_GPIOVAL 0x1 |
||
2211 | #define SET_ASIC_VOLTAGE_MODE_GET_GPIOMASK 0x2 |
||
2212 | |||
1430 | serge | 2213 | typedef struct _SET_VOLTAGE_PARAMETERS |
2214 | { |
||
2215 | UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ |
||
2216 | UCHAR ucVoltageMode; // To set all, to set source A or source B or ... |
||
2217 | UCHAR ucVoltageIndex; // An index to tell which voltage level |
||
6104 | serge | 2218 | UCHAR ucReserved; |
1430 | serge | 2219 | }SET_VOLTAGE_PARAMETERS; |
1117 | serge | 2220 | |
1430 | serge | 2221 | typedef struct _SET_VOLTAGE_PARAMETERS_V2 |
2222 | { |
||
2223 | UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ |
||
2224 | UCHAR ucVoltageMode; // Not used, maybe use for state machine for differen power mode |
||
2225 | USHORT usVoltageLevel; // real voltage level |
||
2226 | }SET_VOLTAGE_PARAMETERS_V2; |
||
1117 | serge | 2227 | |
5078 | serge | 2228 | // used by both SetVoltageTable v1.3 and v1.4 |
2997 | Serge | 2229 | typedef struct _SET_VOLTAGE_PARAMETERS_V1_3 |
2230 | { |
||
2231 | UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI |
||
2232 | UCHAR ucVoltageMode; // Indicate action: Set voltage level |
||
2233 | USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) |
||
2234 | }SET_VOLTAGE_PARAMETERS_V1_3; |
||
2235 | |||
2236 | //ucVoltageType |
||
2237 | #define VOLTAGE_TYPE_VDDC 1 |
||
2238 | #define VOLTAGE_TYPE_MVDDC 2 |
||
2239 | #define VOLTAGE_TYPE_MVDDQ 3 |
||
2240 | #define VOLTAGE_TYPE_VDDCI 4 |
||
2241 | |||
2242 | //SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode |
||
2243 | #define ATOM_SET_VOLTAGE 0 //Set voltage Level |
||
2244 | #define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator |
||
5078 | serge | 2245 | #define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase, only for SVID/PVID regulator |
2246 | #define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used from SetVoltageTable v1.3 |
||
2247 | #define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID, not used for SetVoltage v1.4 |
||
2248 | #define ATOM_GET_LEAKAGE_ID 8 //Get Leakage Voltage Id ( starting from SMU7x IP ), SetVoltage v1.4 |
||
2997 | Serge | 2249 | |
2250 | // define vitual voltage id in usVoltageLevel |
||
2251 | #define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01 |
||
2252 | #define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02 |
||
2253 | #define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03 |
||
2254 | #define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04 |
||
5078 | serge | 2255 | #define ATOM_VIRTUAL_VOLTAGE_ID4 0xff05 |
2256 | #define ATOM_VIRTUAL_VOLTAGE_ID5 0xff06 |
||
2257 | #define ATOM_VIRTUAL_VOLTAGE_ID6 0xff07 |
||
2258 | #define ATOM_VIRTUAL_VOLTAGE_ID7 0xff08 |
||
2997 | Serge | 2259 | |
1430 | serge | 2260 | typedef struct _SET_VOLTAGE_PS_ALLOCATION |
2261 | { |
||
6104 | serge | 2262 | SET_VOLTAGE_PARAMETERS sASICSetVoltage; |
2263 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; |
||
1430 | serge | 2264 | }SET_VOLTAGE_PS_ALLOCATION; |
1117 | serge | 2265 | |
2997 | Serge | 2266 | // New Added from SI for GetVoltageInfoTable, input parameter structure |
2267 | typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1 |
||
2268 | { |
||
2269 | UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI |
||
2270 | UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info |
||
2271 | USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id |
||
2272 | ULONG ulReserved; |
||
2273 | }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1; |
||
2274 | |||
2275 | // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID |
||
2276 | typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 |
||
2277 | { |
||
2278 | ULONG ulVotlageGpioState; |
||
2279 | ULONG ulVoltageGPioMask; |
||
2280 | }GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; |
||
2281 | |||
2282 | // New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID |
||
2283 | typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 |
||
2284 | { |
||
2285 | USHORT usVoltageLevel; |
||
2286 | USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator |
||
2287 | ULONG ulReseved; |
||
2288 | }GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; |
||
2289 | |||
2290 | |||
2291 | // GetVoltageInfo v1.1 ucVoltageMode |
||
2292 | #define ATOM_GET_VOLTAGE_VID 0x00 |
||
2293 | #define ATOM_GET_VOTLAGE_INIT_SEQ 0x03 |
||
2294 | #define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04 |
||
5078 | serge | 2295 | #define ATOM_GET_VOLTAGE_SVID2 0x07 //Get SVI2 Regulator Info |
2296 | |||
2997 | Serge | 2297 | // for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state |
6104 | serge | 2298 | #define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 |
2997 | Serge | 2299 | // for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state |
2300 | #define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11 |
||
5078 | serge | 2301 | |
2997 | Serge | 2302 | #define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12 |
2303 | #define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13 |
||
2304 | |||
5078 | serge | 2305 | // New Added from CI Hawaii for GetVoltageInfoTable, input parameter structure |
2306 | typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2 |
||
2307 | { |
||
2308 | UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI |
||
2309 | UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info |
||
2310 | USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id |
||
2311 | ULONG ulSCLKFreq; // Input: when ucVoltageMode= ATOM_GET_VOLTAGE_EVV_VOLTAGE, DPM state SCLK frequency, Define in PPTable SCLK/Voltage dependence table |
||
2312 | }GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_2; |
||
2313 | |||
2314 | // New in GetVoltageInfo v1.2 ucVoltageMode |
||
2315 | #define ATOM_GET_VOLTAGE_EVV_VOLTAGE 0x09 |
||
2316 | |||
2317 | // New Added from CI Hawaii for EVV feature |
||
2318 | typedef struct _GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2 |
||
2319 | { |
||
2320 | USHORT usVoltageLevel; // real voltage level in unit of mv |
||
2321 | USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator |
||
2322 | ULONG ulReseved; |
||
2323 | }GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_2; |
||
2324 | |||
6104 | serge | 2325 | /****************************************************************************/ |
1430 | serge | 2326 | // Structures used by TVEncoderControlTable |
6104 | serge | 2327 | /****************************************************************************/ |
1430 | serge | 2328 | typedef struct _TV_ENCODER_CONTROL_PARAMETERS |
2329 | { |
||
2330 | USHORT usPixelClock; // in 10KHz; for bios convenient |
||
2331 | UCHAR ucTvStandard; // See definition "ATOM_TV_NTSC ..." |
||
2332 | UCHAR ucAction; // 0: turn off encoder |
||
2333 | // 1: setup and turn on encoder |
||
2334 | }TV_ENCODER_CONTROL_PARAMETERS; |
||
1117 | serge | 2335 | |
1430 | serge | 2336 | typedef struct _TV_ENCODER_CONTROL_PS_ALLOCATION |
2337 | { |
||
6104 | serge | 2338 | TV_ENCODER_CONTROL_PARAMETERS sTVEncoder; |
1430 | serge | 2339 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; // Don't set this one |
2340 | }TV_ENCODER_CONTROL_PS_ALLOCATION; |
||
1117 | serge | 2341 | |
1430 | serge | 2342 | //==============================Data Table Portion==================================== |
1117 | serge | 2343 | |
6104 | serge | 2344 | /****************************************************************************/ |
1430 | serge | 2345 | // Structure used in Data.mtb |
6104 | serge | 2346 | /****************************************************************************/ |
1430 | serge | 2347 | typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES |
2348 | { |
||
2349 | USHORT UtilityPipeLine; // Offest for the utility to get parser info,Don't change this position! |
||
2350 | USHORT MultimediaCapabilityInfo; // Only used by MM Lib,latest version 1.1, not configuable from Bios, need to include the table to build Bios |
||
2351 | USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios |
||
2352 | USHORT StandardVESA_Timing; // Only used by Bios |
||
2353 | USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4 |
||
2997 | Serge | 2354 | USHORT PaletteData; // Only used by BIOS |
1963 | serge | 2355 | USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info |
2997 | Serge | 2356 | USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1 |
1430 | serge | 2357 | USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1 |
2358 | USHORT SupportedDevicesInfo; // Will be obsolete from R600 |
||
2359 | USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600 |
||
2360 | USHORT VRAM_UsageByFirmware; // Shared by various SW components,latest version 1.3 will be used from R600 |
||
2361 | USHORT GPIO_Pin_LUT; // Shared by various SW components,latest version 1.1 |
||
2362 | USHORT VESA_ToInternalModeLUT; // Only used by Bios |
||
2363 | USHORT ComponentVideoInfo; // Shared by various SW components,latest version 2.1 will be used from R600 |
||
2364 | USHORT PowerPlayInfo; // Shared by various SW components,latest version 2.1,new design from R600 |
||
2365 | USHORT CompassionateData; // Will be obsolete from R600 |
||
2366 | USHORT SaveRestoreInfo; // Only used by Bios |
||
2367 | USHORT PPLL_SS_Info; // Shared by various SW components,latest version 1.2, used to call SS_Info, change to new name because of int ASIC SS info |
||
2368 | USHORT OemInfo; // Defined and used by external SW, should be obsolete soon |
||
2369 | USHORT XTMDS_Info; // Will be obsolete from R600 |
||
2370 | USHORT MclkSS_Info; // Shared by various SW components,latest version 1.1, only enabled when ext SS chip is used |
||
2371 | USHORT Object_Header; // Shared by various SW components,latest version 1.1 |
||
2372 | USHORT IndirectIOAccess; // Only used by Bios,this table position can't change at all!! |
||
2373 | USHORT MC_InitParameter; // Only used by command table |
||
2374 | USHORT ASIC_VDDC_Info; // Will be obsolete from R600 |
||
2375 | USHORT ASIC_InternalSS_Info; // New tabel name from R600, used to be called "ASIC_MVDDC_Info" |
||
2376 | USHORT TV_VideoMode; // Only used by command table |
||
2377 | USHORT VRAM_Info; // Only used by command table, latest version 1.3 |
||
2378 | USHORT MemoryTrainingInfo; // Used for VBIOS and Diag utility for memory training purpose since R600. the new table rev start from 2.1 |
||
2379 | USHORT IntegratedSystemInfo; // Shared by various SW components |
||
2380 | USHORT ASIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600 |
||
2381 | USHORT VoltageObjectInfo; // Shared by various SW components, latest version 1.1 |
||
2382 | USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1 |
||
2383 | }ATOM_MASTER_LIST_OF_DATA_TABLES; |
||
1117 | serge | 2384 | |
1430 | serge | 2385 | typedef struct _ATOM_MASTER_DATA_TABLE |
2386 | { |
||
6104 | serge | 2387 | ATOM_COMMON_TABLE_HEADER sHeader; |
2388 | ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; |
||
1430 | serge | 2389 | }ATOM_MASTER_DATA_TABLE; |
1117 | serge | 2390 | |
2997 | Serge | 2391 | // For backward compatible |
2392 | #define LVDS_Info LCD_Info |
||
2393 | #define DAC_Info PaletteData |
||
2394 | #define TMDS_Info DIGTransmitterInfo |
||
1963 | serge | 2395 | |
6104 | serge | 2396 | /****************************************************************************/ |
1430 | serge | 2397 | // Structure used in MultimediaCapabilityInfoTable |
6104 | serge | 2398 | /****************************************************************************/ |
1430 | serge | 2399 | typedef struct _ATOM_MULTIMEDIA_CAPABILITY_INFO |
2400 | { |
||
6104 | serge | 2401 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 2402 | ULONG ulSignature; // HW info table signature string "$ATI" |
2403 | UCHAR ucI2C_Type; // I2C type (normal GP_IO, ImpactTV GP_IO, Dedicated I2C pin, etc) |
||
2404 | UCHAR ucTV_OutInfo; // Type of TV out supported (3:0) and video out crystal frequency (6:4) and TV data port (7) |
||
2405 | UCHAR ucVideoPortInfo; // Provides the video port capabilities |
||
2406 | UCHAR ucHostPortInfo; // Provides host port configuration information |
||
2407 | }ATOM_MULTIMEDIA_CAPABILITY_INFO; |
||
1117 | serge | 2408 | |
6104 | serge | 2409 | /****************************************************************************/ |
1430 | serge | 2410 | // Structure used in MultimediaConfigInfoTable |
6104 | serge | 2411 | /****************************************************************************/ |
1430 | serge | 2412 | typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO |
2413 | { |
||
6104 | serge | 2414 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 2415 | ULONG ulSignature; // MM info table signature sting "$MMT" |
2416 | UCHAR ucTunerInfo; // Type of tuner installed on the adapter (4:0) and video input for tuner (7:5) |
||
2417 | UCHAR ucAudioChipInfo; // List the audio chip type (3:0) product type (4) and OEM revision (7:5) |
||
2418 | UCHAR ucProductID; // Defines as OEM ID or ATI board ID dependent on product type setting |
||
2419 | UCHAR ucMiscInfo1; // Tuner voltage (1:0) HW teletext support (3:2) FM audio decoder (5:4) reserved (6) audio scrambling (7) |
||
2420 | UCHAR ucMiscInfo2; // I2S input config (0) I2S output config (1) I2S Audio Chip (4:2) SPDIF Output Config (5) reserved (7:6) |
||
2421 | UCHAR ucMiscInfo3; // Video Decoder Type (3:0) Video In Standard/Crystal (7:4) |
||
2422 | UCHAR ucMiscInfo4; // Video Decoder Host Config (2:0) reserved (7:3) |
||
2423 | UCHAR ucVideoInput0Info;// Video Input 0 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) |
||
2424 | UCHAR ucVideoInput1Info;// Video Input 1 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) |
||
2425 | UCHAR ucVideoInput2Info;// Video Input 2 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) |
||
2426 | UCHAR ucVideoInput3Info;// Video Input 3 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) |
||
2427 | UCHAR ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6) |
||
2428 | }ATOM_MULTIMEDIA_CONFIG_INFO; |
||
1117 | serge | 2429 | |
1963 | serge | 2430 | |
1430 | serge | 2431 | /****************************************************************************/ |
2432 | // Structures used in FirmwareInfoTable |
||
2433 | /****************************************************************************/ |
||
1117 | serge | 2434 | |
1963 | serge | 2435 | // usBIOSCapability Definition: |
1430 | serge | 2436 | // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; |
2437 | // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; |
||
2438 | // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; |
||
2439 | // Others: Reserved |
||
1117 | serge | 2440 | #define ATOM_BIOS_INFO_ATOM_FIRMWARE_POSTED 0x0001 |
2441 | #define ATOM_BIOS_INFO_DUAL_CRTC_SUPPORT 0x0002 |
||
2442 | #define ATOM_BIOS_INFO_EXTENDED_DESKTOP_SUPPORT 0x0004 |
||
1430 | serge | 2443 | #define ATOM_BIOS_INFO_MEMORY_CLOCK_SS_SUPPORT 0x0008 // (valid from v1.1 ~v1.4):=1: memclk SS enable, =0 memclk SS disable. |
2444 | #define ATOM_BIOS_INFO_ENGINE_CLOCK_SS_SUPPORT 0x0010 // (valid from v1.1 ~v1.4):=1: engclk SS enable, =0 engclk SS disable. |
||
1117 | serge | 2445 | #define ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU 0x0020 |
2446 | #define ATOM_BIOS_INFO_WMI_SUPPORT 0x0040 |
||
2447 | #define ATOM_BIOS_INFO_PPMODE_ASSIGNGED_BY_SYSTEM 0x0080 |
||
2448 | #define ATOM_BIOS_INFO_HYPERMEMORY_SUPPORT 0x0100 |
||
2449 | #define ATOM_BIOS_INFO_HYPERMEMORY_SIZE_MASK 0x1E00 |
||
2450 | #define ATOM_BIOS_INFO_VPOST_WITHOUT_FIRST_MODE_SET 0x2000 |
||
2451 | #define ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE 0x4000 |
||
1430 | serge | 2452 | #define ATOM_BIOS_INFO_MEMORY_CLOCK_EXT_SS_SUPPORT 0x0008 // (valid from v2.1 ): =1: memclk ss enable with external ss chip |
2453 | #define ATOM_BIOS_INFO_ENGINE_CLOCK_EXT_SS_SUPPORT 0x0010 // (valid from v2.1 ): =1: engclk ss enable with external ss chip |
||
1117 | serge | 2454 | |
2455 | #ifndef _H2INC |
||
2456 | |||
1430 | serge | 2457 | //Please don't add or expand this bitfield structure below, this one will retire soon.! |
2458 | typedef struct _ATOM_FIRMWARE_CAPABILITY |
||
2459 | { |
||
1117 | serge | 2460 | #if ATOM_BIG_ENDIAN |
2997 | Serge | 2461 | USHORT Reserved:1; |
2462 | USHORT SCL2Redefined:1; |
||
2463 | USHORT PostWithoutModeSet:1; |
||
6104 | serge | 2464 | USHORT HyperMemory_Size:4; |
2465 | USHORT HyperMemory_Support:1; |
||
2466 | USHORT PPMode_Assigned:1; |
||
2467 | USHORT WMI_SUPPORT:1; |
||
2468 | USHORT GPUControlsBL:1; |
||
2469 | USHORT EngineClockSS_Support:1; |
||
2470 | USHORT MemoryClockSS_Support:1; |
||
2471 | USHORT ExtendedDesktopSupport:1; |
||
2472 | USHORT DualCRTC_Support:1; |
||
2473 | USHORT FirmwarePosted:1; |
||
1117 | serge | 2474 | #else |
6104 | serge | 2475 | USHORT FirmwarePosted:1; |
2476 | USHORT DualCRTC_Support:1; |
||
2477 | USHORT ExtendedDesktopSupport:1; |
||
2478 | USHORT MemoryClockSS_Support:1; |
||
2479 | USHORT EngineClockSS_Support:1; |
||
2480 | USHORT GPUControlsBL:1; |
||
2481 | USHORT WMI_SUPPORT:1; |
||
2482 | USHORT PPMode_Assigned:1; |
||
2483 | USHORT HyperMemory_Support:1; |
||
2484 | USHORT HyperMemory_Size:4; |
||
2997 | Serge | 2485 | USHORT PostWithoutModeSet:1; |
2486 | USHORT SCL2Redefined:1; |
||
2487 | USHORT Reserved:1; |
||
1117 | serge | 2488 | #endif |
1430 | serge | 2489 | }ATOM_FIRMWARE_CAPABILITY; |
1117 | serge | 2490 | |
1430 | serge | 2491 | typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS |
2492 | { |
||
6104 | serge | 2493 | ATOM_FIRMWARE_CAPABILITY sbfAccess; |
2494 | USHORT susAccess; |
||
1430 | serge | 2495 | }ATOM_FIRMWARE_CAPABILITY_ACCESS; |
1117 | serge | 2496 | |
2497 | #else |
||
2498 | |||
1430 | serge | 2499 | typedef union _ATOM_FIRMWARE_CAPABILITY_ACCESS |
2500 | { |
||
6104 | serge | 2501 | USHORT susAccess; |
1430 | serge | 2502 | }ATOM_FIRMWARE_CAPABILITY_ACCESS; |
1117 | serge | 2503 | |
2504 | #endif |
||
2505 | |||
1430 | serge | 2506 | typedef struct _ATOM_FIRMWARE_INFO |
2507 | { |
||
6104 | serge | 2508 | ATOM_COMMON_TABLE_HEADER sHeader; |
2509 | ULONG ulFirmwareRevision; |
||
1430 | serge | 2510 | ULONG ulDefaultEngineClock; //In 10Khz unit |
2511 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
2512 | ULONG ulDriverTargetEngineClock; //In 10Khz unit |
||
2513 | ULONG ulDriverTargetMemoryClock; //In 10Khz unit |
||
2514 | ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit |
||
2515 | ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit |
||
2516 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2517 | ULONG ulASICMaxEngineClock; //In 10Khz unit |
||
2518 | ULONG ulASICMaxMemoryClock; //In 10Khz unit |
||
6104 | serge | 2519 | UCHAR ucASICMaxTemperature; |
1430 | serge | 2520 | UCHAR ucPadding[3]; //Don't use them |
2521 | ULONG aulReservedForBIOS[3]; //Don't use them |
||
2522 | USHORT usMinEngineClockPLL_Input; //In 10Khz unit |
||
2523 | USHORT usMaxEngineClockPLL_Input; //In 10Khz unit |
||
2524 | USHORT usMinEngineClockPLL_Output; //In 10Khz unit |
||
2525 | USHORT usMinMemoryClockPLL_Input; //In 10Khz unit |
||
2526 | USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit |
||
2527 | USHORT usMinMemoryClockPLL_Output; //In 10Khz unit |
||
2528 | USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk |
||
2529 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2530 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2531 | USHORT usMinPixelClockPLL_Output; //In 10Khz unit, the definitions above can't change!!! |
||
6104 | serge | 2532 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
1430 | serge | 2533 | USHORT usReferenceClock; //In 10Khz unit |
2534 | USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit |
||
2535 | UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit |
||
2536 | UCHAR ucDesign_ID; //Indicate what is the board design |
||
2537 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2538 | }ATOM_FIRMWARE_INFO; |
||
1117 | serge | 2539 | |
1430 | serge | 2540 | typedef struct _ATOM_FIRMWARE_INFO_V1_2 |
2541 | { |
||
6104 | serge | 2542 | ATOM_COMMON_TABLE_HEADER sHeader; |
2543 | ULONG ulFirmwareRevision; |
||
1430 | serge | 2544 | ULONG ulDefaultEngineClock; //In 10Khz unit |
2545 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
2546 | ULONG ulDriverTargetEngineClock; //In 10Khz unit |
||
2547 | ULONG ulDriverTargetMemoryClock; //In 10Khz unit |
||
2548 | ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit |
||
2549 | ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit |
||
2550 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2551 | ULONG ulASICMaxEngineClock; //In 10Khz unit |
||
2552 | ULONG ulASICMaxMemoryClock; //In 10Khz unit |
||
6104 | serge | 2553 | UCHAR ucASICMaxTemperature; |
2554 | UCHAR ucMinAllowedBL_Level; |
||
1430 | serge | 2555 | UCHAR ucPadding[2]; //Don't use them |
2556 | ULONG aulReservedForBIOS[2]; //Don't use them |
||
2557 | ULONG ulMinPixelClockPLL_Output; //In 10Khz unit |
||
2558 | USHORT usMinEngineClockPLL_Input; //In 10Khz unit |
||
2559 | USHORT usMaxEngineClockPLL_Input; //In 10Khz unit |
||
2560 | USHORT usMinEngineClockPLL_Output; //In 10Khz unit |
||
2561 | USHORT usMinMemoryClockPLL_Input; //In 10Khz unit |
||
2562 | USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit |
||
2563 | USHORT usMinMemoryClockPLL_Output; //In 10Khz unit |
||
2564 | USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk |
||
2565 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2566 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2567 | USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output |
||
6104 | serge | 2568 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
1430 | serge | 2569 | USHORT usReferenceClock; //In 10Khz unit |
2570 | USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit |
||
2571 | UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit |
||
2572 | UCHAR ucDesign_ID; //Indicate what is the board design |
||
2573 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2574 | }ATOM_FIRMWARE_INFO_V1_2; |
||
1117 | serge | 2575 | |
1430 | serge | 2576 | typedef struct _ATOM_FIRMWARE_INFO_V1_3 |
2577 | { |
||
6104 | serge | 2578 | ATOM_COMMON_TABLE_HEADER sHeader; |
2579 | ULONG ulFirmwareRevision; |
||
1430 | serge | 2580 | ULONG ulDefaultEngineClock; //In 10Khz unit |
2581 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
2582 | ULONG ulDriverTargetEngineClock; //In 10Khz unit |
||
2583 | ULONG ulDriverTargetMemoryClock; //In 10Khz unit |
||
2584 | ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit |
||
2585 | ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit |
||
2586 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2587 | ULONG ulASICMaxEngineClock; //In 10Khz unit |
||
2588 | ULONG ulASICMaxMemoryClock; //In 10Khz unit |
||
6104 | serge | 2589 | UCHAR ucASICMaxTemperature; |
2590 | UCHAR ucMinAllowedBL_Level; |
||
1430 | serge | 2591 | UCHAR ucPadding[2]; //Don't use them |
2592 | ULONG aulReservedForBIOS; //Don't use them |
||
2593 | ULONG ul3DAccelerationEngineClock;//In 10Khz unit |
||
2594 | ULONG ulMinPixelClockPLL_Output; //In 10Khz unit |
||
2595 | USHORT usMinEngineClockPLL_Input; //In 10Khz unit |
||
2596 | USHORT usMaxEngineClockPLL_Input; //In 10Khz unit |
||
2597 | USHORT usMinEngineClockPLL_Output; //In 10Khz unit |
||
2598 | USHORT usMinMemoryClockPLL_Input; //In 10Khz unit |
||
2599 | USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit |
||
2600 | USHORT usMinMemoryClockPLL_Output; //In 10Khz unit |
||
2601 | USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk |
||
2602 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2603 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2604 | USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output |
||
6104 | serge | 2605 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
1430 | serge | 2606 | USHORT usReferenceClock; //In 10Khz unit |
2607 | USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit |
||
2608 | UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit |
||
2609 | UCHAR ucDesign_ID; //Indicate what is the board design |
||
2610 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2611 | }ATOM_FIRMWARE_INFO_V1_3; |
||
1117 | serge | 2612 | |
1430 | serge | 2613 | typedef struct _ATOM_FIRMWARE_INFO_V1_4 |
2614 | { |
||
6104 | serge | 2615 | ATOM_COMMON_TABLE_HEADER sHeader; |
2616 | ULONG ulFirmwareRevision; |
||
1430 | serge | 2617 | ULONG ulDefaultEngineClock; //In 10Khz unit |
2618 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
2619 | ULONG ulDriverTargetEngineClock; //In 10Khz unit |
||
2620 | ULONG ulDriverTargetMemoryClock; //In 10Khz unit |
||
2621 | ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit |
||
2622 | ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit |
||
2623 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2624 | ULONG ulASICMaxEngineClock; //In 10Khz unit |
||
2625 | ULONG ulASICMaxMemoryClock; //In 10Khz unit |
||
6104 | serge | 2626 | UCHAR ucASICMaxTemperature; |
2627 | UCHAR ucMinAllowedBL_Level; |
||
1430 | serge | 2628 | USHORT usBootUpVDDCVoltage; //In MV unit |
2629 | USHORT usLcdMinPixelClockPLL_Output; // In MHz unit |
||
2630 | USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit |
||
2631 | ULONG ul3DAccelerationEngineClock;//In 10Khz unit |
||
2632 | ULONG ulMinPixelClockPLL_Output; //In 10Khz unit |
||
2633 | USHORT usMinEngineClockPLL_Input; //In 10Khz unit |
||
2634 | USHORT usMaxEngineClockPLL_Input; //In 10Khz unit |
||
2635 | USHORT usMinEngineClockPLL_Output; //In 10Khz unit |
||
2636 | USHORT usMinMemoryClockPLL_Input; //In 10Khz unit |
||
2637 | USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit |
||
2638 | USHORT usMinMemoryClockPLL_Output; //In 10Khz unit |
||
2639 | USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk |
||
2640 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2641 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2642 | USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output |
||
2643 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
||
2644 | USHORT usReferenceClock; //In 10Khz unit |
||
2645 | USHORT usPM_RTS_Location; //RTS PM4 starting location in ROM in 1Kb unit |
||
2646 | UCHAR ucPM_RTS_StreamSize; //RTS PM4 packets in Kb unit |
||
2647 | UCHAR ucDesign_ID; //Indicate what is the board design |
||
2648 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2649 | }ATOM_FIRMWARE_INFO_V1_4; |
||
2650 | |||
2651 | //the structure below to be used from Cypress |
||
2652 | typedef struct _ATOM_FIRMWARE_INFO_V2_1 |
||
2653 | { |
||
2654 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
2655 | ULONG ulFirmwareRevision; |
||
2656 | ULONG ulDefaultEngineClock; //In 10Khz unit |
||
2657 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
2658 | ULONG ulReserved1; |
||
2659 | ULONG ulReserved2; |
||
2660 | ULONG ulMaxEngineClockPLL_Output; //In 10Khz unit |
||
2661 | ULONG ulMaxMemoryClockPLL_Output; //In 10Khz unit |
||
2662 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2663 | ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock |
||
2664 | ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit |
||
2665 | UCHAR ucReserved1; //Was ucASICMaxTemperature; |
||
2666 | UCHAR ucMinAllowedBL_Level; |
||
2667 | USHORT usBootUpVDDCVoltage; //In MV unit |
||
2668 | USHORT usLcdMinPixelClockPLL_Output; // In MHz unit |
||
2669 | USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit |
||
2670 | ULONG ulReserved4; //Was ulAsicMaximumVoltage |
||
2671 | ULONG ulMinPixelClockPLL_Output; //In 10Khz unit |
||
2672 | USHORT usMinEngineClockPLL_Input; //In 10Khz unit |
||
2673 | USHORT usMaxEngineClockPLL_Input; //In 10Khz unit |
||
2674 | USHORT usMinEngineClockPLL_Output; //In 10Khz unit |
||
2675 | USHORT usMinMemoryClockPLL_Input; //In 10Khz unit |
||
2676 | USHORT usMaxMemoryClockPLL_Input; //In 10Khz unit |
||
2677 | USHORT usMinMemoryClockPLL_Output; //In 10Khz unit |
||
2678 | USHORT usMaxPixelClock; //In 10Khz unit, Max. Pclk |
||
2679 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2680 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2681 | USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMinPixelClockPLL_Output |
||
6104 | serge | 2682 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
1430 | serge | 2683 | USHORT usCoreReferenceClock; //In 10Khz unit |
2684 | USHORT usMemoryReferenceClock; //In 10Khz unit |
||
2685 | USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock |
||
2686 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2687 | UCHAR ucReserved4[3]; |
||
2688 | }ATOM_FIRMWARE_INFO_V2_1; |
||
1117 | serge | 2689 | |
1963 | serge | 2690 | //the structure below to be used from NI |
2691 | //ucTableFormatRevision=2 |
||
2692 | //ucTableContentRevision=2 |
||
2693 | typedef struct _ATOM_FIRMWARE_INFO_V2_2 |
||
2694 | { |
||
2695 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
2696 | ULONG ulFirmwareRevision; |
||
2697 | ULONG ulDefaultEngineClock; //In 10Khz unit |
||
2698 | ULONG ulDefaultMemoryClock; //In 10Khz unit |
||
5078 | serge | 2699 | ULONG ulSPLL_OutputFreq; //In 10Khz unit |
2700 | ULONG ulGPUPLL_OutputFreq; //In 10Khz unit |
||
1963 | serge | 2701 | ULONG ulReserved1; //Was ulMaxEngineClockPLL_Output; //In 10Khz unit* |
2702 | ULONG ulReserved2; //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit* |
||
2703 | ULONG ulMaxPixelClockPLL_Output; //In 10Khz unit |
||
2704 | ULONG ulBinaryAlteredInfo; //Was ulASICMaxEngineClock ? |
||
2705 | ULONG ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage. |
||
2706 | UCHAR ucReserved3; //Was ucASICMaxTemperature; |
||
2707 | UCHAR ucMinAllowedBL_Level; |
||
2708 | USHORT usBootUpVDDCVoltage; //In MV unit |
||
2709 | USHORT usLcdMinPixelClockPLL_Output; // In MHz unit |
||
2710 | USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit |
||
2711 | ULONG ulReserved4; //Was ulAsicMaximumVoltage |
||
2712 | ULONG ulMinPixelClockPLL_Output; //In 10Khz unit |
||
2997 | Serge | 2713 | UCHAR ucRemoteDisplayConfig; |
2714 | UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input |
||
1963 | serge | 2715 | ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input |
2716 | ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output |
||
2717 | USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC |
||
2718 | USHORT usMinPixelClockPLL_Input; //In 10Khz unit |
||
2719 | USHORT usMaxPixelClockPLL_Input; //In 10Khz unit |
||
2720 | USHORT usBootUpVDDCIVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; |
||
2721 | ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability; |
||
2722 | USHORT usCoreReferenceClock; //In 10Khz unit |
||
2723 | USHORT usMemoryReferenceClock; //In 10Khz unit |
||
2724 | USHORT usUniphyDPModeExtClkFreq; //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock |
||
2725 | UCHAR ucMemoryModule_ID; //Indicate what is the board design |
||
2726 | UCHAR ucReserved9[3]; |
||
2727 | USHORT usBootUpMVDDCVoltage; //In unit of mv; Was usMinPixelClockPLL_Output; |
||
2728 | USHORT usReserved12; |
||
2729 | ULONG ulReserved10[3]; // New added comparing to previous version |
||
2730 | }ATOM_FIRMWARE_INFO_V2_2; |
||
1117 | serge | 2731 | |
1963 | serge | 2732 | #define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2 |
1430 | serge | 2733 | |
2997 | Serge | 2734 | |
2735 | // definition of ucRemoteDisplayConfig |
||
2736 | #define REMOTE_DISPLAY_DISABLE 0x00 |
||
2737 | #define REMOTE_DISPLAY_ENABLE 0x01 |
||
2738 | |||
6104 | serge | 2739 | /****************************************************************************/ |
1430 | serge | 2740 | // Structures used in IntegratedSystemInfoTable |
6104 | serge | 2741 | /****************************************************************************/ |
1117 | serge | 2742 | #define IGP_CAP_FLAG_DYNAMIC_CLOCK_EN 0x2 |
2743 | #define IGP_CAP_FLAG_AC_CARD 0x4 |
||
2744 | #define IGP_CAP_FLAG_SDVO_CARD 0x8 |
||
2745 | #define IGP_CAP_FLAG_POSTDIV_BY_2_MODE 0x10 |
||
2746 | |||
1430 | serge | 2747 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO |
2748 | { |
||
6104 | serge | 2749 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 2750 | ULONG ulBootUpEngineClock; //in 10kHz unit |
2751 | ULONG ulBootUpMemoryClock; //in 10kHz unit |
||
2752 | ULONG ulMaxSystemMemoryClock; //in 10kHz unit |
||
2753 | ULONG ulMinSystemMemoryClock; //in 10kHz unit |
||
6104 | serge | 2754 | UCHAR ucNumberOfCyclesInPeriodHi; |
1430 | serge | 2755 | UCHAR ucLCDTimingSel; //=0:not valid.!=0 sel this timing descriptor from LCD EDID. |
6104 | serge | 2756 | USHORT usReserved1; |
1430 | serge | 2757 | USHORT usInterNBVoltageLow; //An intermidiate PMW value to set the voltage |
2758 | USHORT usInterNBVoltageHigh; //Another intermidiate PMW value to set the voltage |
||
6104 | serge | 2759 | ULONG ulReserved[2]; |
1117 | serge | 2760 | |
1430 | serge | 2761 | USHORT usFSBClock; //In MHz unit |
2762 | USHORT usCapabilityFlag; //Bit0=1 indicates the fake HDMI support,Bit1=0/1 for Dynamic clocking dis/enable |
||
2763 | //Bit[3:2]== 0:No PCIE card, 1:AC card, 2:SDVO card |
||
2764 | //Bit[4]==1: P/2 mode, ==0: P/1 mode |
||
2765 | USHORT usPCIENBCfgReg7; //bit[7:0]=MUX_Sel, bit[9:8]=MUX_SEL_LEVEL2, bit[10]=Lane_Reversal |
||
2766 | USHORT usK8MemoryClock; //in MHz unit |
||
2767 | USHORT usK8SyncStartDelay; //in 0.01 us unit |
||
2768 | USHORT usK8DataReturnTime; //in 0.01 us unit |
||
6104 | serge | 2769 | UCHAR ucMaxNBVoltage; |
2770 | UCHAR ucMinNBVoltage; |
||
1430 | serge | 2771 | UCHAR ucMemoryType; //[7:4]=1:DDR1;=2:DDR2;=3:DDR3.[3:0] is reserved |
2772 | UCHAR ucNumberOfCyclesInPeriod; //CG.FVTHROT_PWM_CTRL_REG0.NumberOfCyclesInPeriod |
||
2773 | UCHAR ucStartingPWM_HighTime; //CG.FVTHROT_PWM_CTRL_REG0.StartingPWM_HighTime |
||
2774 | UCHAR ucHTLinkWidth; //16 bit vs. 8 bit |
||
6104 | serge | 2775 | UCHAR ucMaxNBVoltageHigh; |
2776 | UCHAR ucMinNBVoltageHigh; |
||
1430 | serge | 2777 | }ATOM_INTEGRATED_SYSTEM_INFO; |
1117 | serge | 2778 | |
2779 | /* Explanation on entries in ATOM_INTEGRATED_SYSTEM_INFO |
||
6104 | serge | 2780 | ulBootUpMemoryClock: For Intel IGP,it's the UMA system memory clock |
1117 | serge | 2781 | For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock |
2782 | ulMaxSystemMemoryClock: For Intel IGP,it's the Max freq from memory SPD if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 |
||
2783 | For AMD IGP,for now this can be 0 |
||
6104 | serge | 2784 | ulMinSystemMemoryClock: For Intel IGP,it's 133MHz if memory runs in ASYNC mode or otherwise (SYNC mode) it's 0 |
1117 | serge | 2785 | For AMD IGP,for now this can be 0 |
2786 | |||
6104 | serge | 2787 | usFSBClock: For Intel IGP,it's FSB Freq |
1117 | serge | 2788 | For AMD IGP,it's HT Link Speed |
2789 | |||
2790 | usK8MemoryClock: For AMD IGP only. For RevF CPU, set it to 200 |
||
2791 | usK8SyncStartDelay: For AMD IGP only. Memory access latency in K8, required for watermark calculation |
||
2792 | usK8DataReturnTime: For AMD IGP only. Memory access latency in K8, required for watermark calculation |
||
2793 | |||
2794 | VC:Voltage Control |
||
2795 | ucMaxNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. |
||
2796 | ucMinNBVoltage: Voltage regulator dependent PWM value. Low 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. |
||
2797 | |||
6104 | serge | 2798 | ucNumberOfCyclesInPeriod: Indicate how many cycles when PWM duty is 100%. low 8 bits of the value. |
2799 | ucNumberOfCyclesInPeriodHi: Indicate how many cycles when PWM duty is 100%. high 8 bits of the value.If the PWM has an inverter,set bit [7]==1,otherwise set it 0 |
||
1117 | serge | 2800 | |
2801 | ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the max voltage.Set this one to 0xFF if VC without PWM. Set this to 0x0 if no VC at all. |
||
2802 | ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. |
||
2803 | |||
1430 | serge | 2804 | |
1117 | serge | 2805 | usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. |
2806 | usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. |
||
2807 | */ |
||
2808 | |||
1430 | serge | 2809 | |
1117 | serge | 2810 | /* |
2811 | The following IGP table is introduced from RS780, which is supposed to be put by SBIOS in FB before IGP VBIOS starts VPOST; |
||
6104 | serge | 2812 | Then VBIOS will copy the whole structure to its image so all GPU SW components can access this data structure to get whatever they need. |
1117 | serge | 2813 | The enough reservation should allow us to never change table revisions. Whenever needed, a GPU SW component can use reserved portion for new data entries. |
2814 | |||
2815 | SW components can access the IGP system infor structure in the same way as before |
||
2816 | */ |
||
2817 | |||
1430 | serge | 2818 | |
2819 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 |
||
2820 | { |
||
6104 | serge | 2821 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 2822 | ULONG ulBootUpEngineClock; //in 10kHz unit |
2823 | ULONG ulReserved1[2]; //must be 0x0 for the reserved |
||
2824 | ULONG ulBootUpUMAClock; //in 10kHz unit |
||
2825 | ULONG ulBootUpSidePortClock; //in 10kHz unit |
||
2826 | ULONG ulMinSidePortClock; //in 10kHz unit |
||
2827 | ULONG ulReserved2[6]; //must be 0x0 for the reserved |
||
2828 | ULONG ulSystemConfig; //see explanation below |
||
6104 | serge | 2829 | ULONG ulBootUpReqDisplayVector; |
2830 | ULONG ulOtherDisplayMisc; |
||
2831 | ULONG ulDDISlot1Config; |
||
2832 | ULONG ulDDISlot2Config; |
||
1430 | serge | 2833 | UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved |
6104 | serge | 2834 | UCHAR ucUMAChannelNumber; |
2835 | UCHAR ucDockingPinBit; |
||
2836 | UCHAR ucDockingPinPolarity; |
||
2837 | ULONG ulDockingPinCFGInfo; |
||
2838 | ULONG ulCPUCapInfo; |
||
2839 | USHORT usNumberOfCyclesInPeriod; |
||
2840 | USHORT usMaxNBVoltage; |
||
2841 | USHORT usMinNBVoltage; |
||
2842 | USHORT usBootUpNBVoltage; |
||
1430 | serge | 2843 | ULONG ulHTLinkFreq; //in 10Khz |
6104 | serge | 2844 | USHORT usMinHTLinkWidth; |
2845 | USHORT usMaxHTLinkWidth; |
||
2846 | USHORT usUMASyncStartDelay; |
||
2847 | USHORT usUMADataReturnTime; |
||
2848 | USHORT usLinkStatusZeroTime; |
||
1430 | serge | 2849 | USHORT usDACEfuse; //for storing badgap value (for RS880 only) |
2850 | ULONG ulHighVoltageHTLinkFreq; // in 10Khz |
||
2851 | ULONG ulLowVoltageHTLinkFreq; // in 10Khz |
||
6104 | serge | 2852 | USHORT usMaxUpStreamHTLinkWidth; |
2853 | USHORT usMaxDownStreamHTLinkWidth; |
||
2854 | USHORT usMinUpStreamHTLinkWidth; |
||
2855 | USHORT usMinDownStreamHTLinkWidth; |
||
1430 | serge | 2856 | USHORT usFirmwareVersion; //0 means FW is not supported. Otherwise it's the FW version loaded by SBIOS and driver should enable FW. |
2857 | USHORT usFullT0Time; // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us. |
||
2858 | ULONG ulReserved3[96]; //must be 0x0 |
||
2859 | }ATOM_INTEGRATED_SYSTEM_INFO_V2; |
||
1117 | serge | 2860 | |
2861 | /* |
||
2862 | ulBootUpEngineClock: Boot-up Engine Clock in 10Khz; |
||
2863 | ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present |
||
2864 | ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not present,this could be equal to or less than maximum supported Sideport memory clock |
||
2865 | |||
6104 | serge | 2866 | ulSystemConfig: |
2867 | Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode; |
||
1117 | serge | 2868 | Bit[1]=1: system boots up at AMD overdrived state or user customized mode. In this case, driver will just stick to this boot-up mode. No other PowerPlay state |
2869 | =0: system boots up at driver control state. Power state depends on PowerPlay table. |
||
2870 | Bit[2]=1: PWM method is used on NB voltage control. =0: GPIO method is used. |
||
2871 | Bit[3]=1: Only one power state(Performance) will be supported. |
||
2872 | =0: Multiple power states supported from PowerPlay table. |
||
6104 | serge | 2873 | Bit[4]=1: CLMC is supported and enabled on current system. |
2874 | =0: CLMC is not supported or enabled on current system. SBIOS need to support HT link/freq change through ATIF interface. |
||
2875 | Bit[5]=1: Enable CDLW for all driver control power states. Max HT width is from SBIOS, while Min HT width is determined by display requirement. |
||
1117 | serge | 2876 | =0: CDLW is disabled. If CLMC is enabled case, Min HT width will be set equal to Max HT width. If CLMC disabled case, Max HT width will be applied. |
2877 | Bit[6]=1: High Voltage requested for all power states. In this case, voltage will be forced at 1.1v and powerplay table voltage drop/throttling request will be ignored. |
||
2878 | =0: Voltage settings is determined by powerplay table. |
||
2879 | Bit[7]=1: Enable CLMC as hybrid Mode. CDLD and CILR will be disabled in this case and we're using legacy C1E. This is workaround for CPU(Griffin) performance issue. |
||
2880 | =0: Enable CLMC as regular mode, CDLD and CILR will be enabled. |
||
1430 | serge | 2881 | Bit[8]=1: CDLF is supported and enabled on current system. |
2882 | =0: CDLF is not supported or enabled on current system. |
||
2883 | Bit[9]=1: DLL Shut Down feature is enabled on current system. |
||
2884 | =0: DLL Shut Down feature is not enabled or supported on current system. |
||
1117 | serge | 2885 | |
2886 | ulBootUpReqDisplayVector: This dword is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEVICE_xxx_SUPPORT for the bit vector definitions. |
||
2887 | |||
2888 | ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion; |
||
1430 | serge | 2889 | [7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are supported by the system. Refer to ucTVSupportedStd definition; |
1117 | serge | 2890 | |
2891 | ulDDISlot1Config: Describes the PCIE lane configuration on this DDI PCIE slot (ADD2 card) or connector (Mobile design). |
||
2892 | [3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lane 3:0; bit 1=1 lane 7:4; bit 2=1 lane 11:8; bit 3=1 lane 15:12) |
||
1430 | serge | 2893 | [7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station (bit 4=1 lane 3:0; bit 5=1 lane 7:4; bit 6=1 lane 11:8; bit 7=1 lane 15:12) |
2894 | When a DDI connector is not "paired" (meaming two connections mutualexclusive on chassis or docking, only one of them can be connected at one time. |
||
2895 | in both chassis and docking, SBIOS has to duplicate the same PCIE lane info from chassis to docking or vice versa. For example: |
||
2896 | one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connection on chassis, SBIOS has to copy bit 6 to bit 2. |
||
2897 | |||
6104 | serge | 2898 | [15:8] - Lane configuration attribute; |
1117 | serge | 2899 | [23:16]- Connector type, possible value: |
2900 | CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D |
||
2901 | CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D |
||
2902 | CONNECTOR_OBJECT_ID_HDMI_TYPE_A |
||
2903 | CONNECTOR_OBJECT_ID_DISPLAYPORT |
||
1430 | serge | 2904 | CONNECTOR_OBJECT_ID_eDP |
1117 | serge | 2905 | [31:24]- Reserved |
2906 | |||
2907 | ulDDISlot2Config: Same as Slot1. |
||
2908 | ucMemoryType: SidePort memory type, set it to 0x0 when Sideport memory is not installed. Driver needs this info to change sideport memory clock. Not for display in CCC. |
||
2909 | For IGP, Hypermemory is the only memory type showed in CCC. |
||
2910 | |||
2911 | ucUMAChannelNumber: how many channels for the UMA; |
||
2912 | |||
6104 | serge | 2913 | ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offset in CFG to read this pin |
1117 | serge | 2914 | ucDockingPinBit: which bit in this register to read the pin status; |
2915 | ucDockingPinPolarity:Polarity of the pin when docked; |
||
2916 | |||
1963 | serge | 2917 | ulCPUCapInfo: [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0 |
1117 | serge | 2918 | |
2919 | usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%. |
||
1430 | serge | 2920 | |
6104 | serge | 2921 | usMaxNBVoltage:Max. voltage control value in either PWM or GPIO mode. |
1117 | serge | 2922 | usMinNBVoltage:Min. voltage control value in either PWM or GPIO mode. |
2923 | GPIO mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=0 |
||
2924 | PWM mode: both usMaxNBVoltage & usMinNBVoltage have a valid value ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE=1 |
||
2925 | GPU SW don't control mode: usMaxNBVoltage & usMinNBVoltage=0 and no care about ulSystemConfig.SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE |
||
1430 | serge | 2926 | |
1117 | serge | 2927 | usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value. |
2928 | |||
2929 | ulHTLinkFreq: Bootup HT link Frequency in 10Khz. |
||
6104 | serge | 2930 | usMinHTLinkWidth: Bootup minimum HT link width. If CDLW disabled, this is equal to usMaxHTLinkWidth. |
1117 | serge | 2931 | If CDLW enabled, both upstream and downstream width should be the same during bootup. |
6104 | serge | 2932 | usMaxHTLinkWidth: Bootup maximum HT link width. If CDLW disabled, this is equal to usMinHTLinkWidth. |
2933 | If CDLW enabled, both upstream and downstream width should be the same during bootup. |
||
1117 | serge | 2934 | |
6104 | serge | 2935 | usUMASyncStartDelay: Memory access latency, required for watermark calculation |
1117 | serge | 2936 | usUMADataReturnTime: Memory access latency, required for watermark calculation |
6104 | serge | 2937 | usLinkStatusZeroTime:Memory access latency required for watermark calculation, set this to 0x0 for K8 CPU, set a proper value in 0.01 the unit of us |
1117 | serge | 2938 | for Griffin or Greyhound. SBIOS needs to convert to actual time by: |
2939 | if T0Ttime [5:4]=00b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.1us (0.0 to 1.5us) |
||
2940 | if T0Ttime [5:4]=01b, then usLinkStatusZeroTime=T0Ttime [3:0]*0.5us (0.0 to 7.5us) |
||
2941 | if T0Ttime [5:4]=10b, then usLinkStatusZeroTime=T0Ttime [3:0]*2.0us (0.0 to 30us) |
||
2942 | if T0Ttime [5:4]=11b, and T0Ttime [3:0]=0x0 to 0xa, then usLinkStatusZeroTime=T0Ttime [3:0]*20us (0.0 to 200us) |
||
2943 | |||
2944 | ulHighVoltageHTLinkFreq: HT link frequency for power state with low voltage. If boot up runs in HT1, this must be 0. |
||
6104 | serge | 2945 | This must be less than or equal to ulHTLinkFreq(bootup frequency). |
1117 | serge | 2946 | ulLowVoltageHTLinkFreq: HT link frequency for power state with low voltage or voltage scaling 1.0v~1.1v. If boot up runs in HT1, this must be 0. |
2947 | This must be less than or equal to ulHighVoltageHTLinkFreq. |
||
2948 | |||
2949 | usMaxUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMaxHTLinkWidth. Not used for now. |
||
2950 | usMaxDownStreamHTLinkWidth: same as above. |
||
2951 | usMinUpStreamHTLinkWidth: Asymmetric link width support in the future, to replace usMinHTLinkWidth. Not used for now. |
||
2952 | usMinDownStreamHTLinkWidth: same as above. |
||
2953 | */ |
||
2954 | |||
1963 | serge | 2955 | // ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition |
2956 | #define INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU 0 |
||
2957 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN 1 |
||
2958 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2 |
||
2959 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3 |
||
2960 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4 |
||
2997 | Serge | 2961 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5 |
1430 | serge | 2962 | |
2997 | Serge | 2963 | #define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code |
1963 | serge | 2964 | |
1117 | serge | 2965 | #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 |
2966 | #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 |
||
6104 | serge | 2967 | #define SYSTEM_CONFIG_USE_PWM_ON_VOLTAGE 0x00000004 |
1117 | serge | 2968 | #define SYSTEM_CONFIG_PERFORMANCE_POWERSTATE_ONLY 0x00000008 |
2969 | #define SYSTEM_CONFIG_CLMC_ENABLED 0x00000010 |
||
2970 | #define SYSTEM_CONFIG_CDLW_ENABLED 0x00000020 |
||
2971 | #define SYSTEM_CONFIG_HIGH_VOLTAGE_REQUESTED 0x00000040 |
||
2972 | #define SYSTEM_CONFIG_CLMC_HYBRID_MODE_ENABLED 0x00000080 |
||
1430 | serge | 2973 | #define SYSTEM_CONFIG_CDLF_ENABLED 0x00000100 |
2974 | #define SYSTEM_CONFIG_DLL_SHUTDOWN_ENABLED 0x00000200 |
||
1117 | serge | 2975 | |
2976 | #define IGP_DDI_SLOT_LANE_CONFIG_MASK 0x000000FF |
||
2977 | |||
2978 | #define b0IGP_DDI_SLOT_LANE_MAP_MASK 0x0F |
||
2979 | #define b0IGP_DDI_SLOT_DOCKING_LANE_MAP_MASK 0xF0 |
||
2980 | #define b0IGP_DDI_SLOT_CONFIG_LANE_0_3 0x01 |
||
2981 | #define b0IGP_DDI_SLOT_CONFIG_LANE_4_7 0x02 |
||
2982 | #define b0IGP_DDI_SLOT_CONFIG_LANE_8_11 0x04 |
||
2983 | #define b0IGP_DDI_SLOT_CONFIG_LANE_12_15 0x08 |
||
2984 | |||
2985 | #define IGP_DDI_SLOT_ATTRIBUTE_MASK 0x0000FF00 |
||
2986 | #define IGP_DDI_SLOT_CONFIG_REVERSED 0x00000100 |
||
2987 | #define b1IGP_DDI_SLOT_CONFIG_REVERSED 0x01 |
||
2988 | |||
2989 | #define IGP_DDI_SLOT_CONNECTOR_TYPE_MASK 0x00FF0000 |
||
2990 | |||
1430 | serge | 2991 | // IntegratedSystemInfoTable new Rev is V5 after V2, because of the real rev of V2 is v1.4. This rev is used for RR |
2992 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5 |
||
2993 | { |
||
2994 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
2995 | ULONG ulBootUpEngineClock; //in 10kHz unit |
||
2996 | ULONG ulDentistVCOFreq; //Dentist VCO clock in 10kHz unit, the source of GPU SCLK, LCLK, UCLK and VCLK. |
||
2997 | ULONG ulLClockFreq; //GPU Lclk freq in 10kHz unit, have relationship with NCLK in NorthBridge |
||
2998 | ULONG ulBootUpUMAClock; //in 10kHz unit |
||
2999 | ULONG ulReserved1[8]; //must be 0x0 for the reserved |
||
3000 | ULONG ulBootUpReqDisplayVector; |
||
3001 | ULONG ulOtherDisplayMisc; |
||
3002 | ULONG ulReserved2[4]; //must be 0x0 for the reserved |
||
3003 | ULONG ulSystemConfig; //TBD |
||
3004 | ULONG ulCPUCapInfo; //TBD |
||
3005 | USHORT usMaxNBVoltage; //high NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse; |
||
3006 | USHORT usMinNBVoltage; //low NB voltage, calculated using current VDDNB (D24F2xDC) and VDDNB offset fuse; |
||
3007 | USHORT usBootUpNBVoltage; //boot up NB voltage |
||
3008 | UCHAR ucHtcTmpLmt; //bit [22:16] of D24F3x64 Hardware Thermal Control (HTC) Register, may not be needed, TBD |
||
3009 | UCHAR ucTjOffset; //bit [28:22] of D24F3xE4 Thermtrip Status Register,may not be needed, TBD |
||
3010 | ULONG ulReserved3[4]; //must be 0x0 for the reserved |
||
3011 | ULONG ulDDISlot1Config; //see above ulDDISlot1Config definition |
||
3012 | ULONG ulDDISlot2Config; |
||
3013 | ULONG ulDDISlot3Config; |
||
3014 | ULONG ulDDISlot4Config; |
||
3015 | ULONG ulReserved4[4]; //must be 0x0 for the reserved |
||
3016 | UCHAR ucMemoryType; //[3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved |
||
3017 | UCHAR ucUMAChannelNumber; |
||
3018 | USHORT usReserved; |
||
3019 | ULONG ulReserved5[4]; //must be 0x0 for the reserved |
||
3020 | ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10];//arrays with values for CSR M3 arbiter for default |
||
3021 | ULONG ulCSR_M3_ARB_CNTL_UVD[10]; //arrays with values for CSR M3 arbiter for UVD playback |
||
3022 | ULONG ulCSR_M3_ARB_CNTL_FS3D[10];//arrays with values for CSR M3 arbiter for Full Screen 3D applications |
||
3023 | ULONG ulReserved6[61]; //must be 0x0 |
||
3024 | }ATOM_INTEGRATED_SYSTEM_INFO_V5; |
||
3025 | |||
1117 | serge | 3026 | #define ATOM_CRT_INT_ENCODER1_INDEX 0x00000000 |
3027 | #define ATOM_LCD_INT_ENCODER1_INDEX 0x00000001 |
||
3028 | #define ATOM_TV_INT_ENCODER1_INDEX 0x00000002 |
||
3029 | #define ATOM_DFP_INT_ENCODER1_INDEX 0x00000003 |
||
3030 | #define ATOM_CRT_INT_ENCODER2_INDEX 0x00000004 |
||
3031 | #define ATOM_LCD_EXT_ENCODER1_INDEX 0x00000005 |
||
3032 | #define ATOM_TV_EXT_ENCODER1_INDEX 0x00000006 |
||
3033 | #define ATOM_DFP_EXT_ENCODER1_INDEX 0x00000007 |
||
3034 | #define ATOM_CV_INT_ENCODER1_INDEX 0x00000008 |
||
3035 | #define ATOM_DFP_INT_ENCODER2_INDEX 0x00000009 |
||
3036 | #define ATOM_CRT_EXT_ENCODER1_INDEX 0x0000000A |
||
3037 | #define ATOM_CV_EXT_ENCODER1_INDEX 0x0000000B |
||
3038 | #define ATOM_DFP_INT_ENCODER3_INDEX 0x0000000C |
||
3039 | #define ATOM_DFP_INT_ENCODER4_INDEX 0x0000000D |
||
3040 | |||
1430 | serge | 3041 | // define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSelTable |
6104 | serge | 3042 | #define ASIC_INT_DAC1_ENCODER_ID 0x00 |
1117 | serge | 3043 | #define ASIC_INT_TV_ENCODER_ID 0x02 |
3044 | #define ASIC_INT_DIG1_ENCODER_ID 0x03 |
||
3045 | #define ASIC_INT_DAC2_ENCODER_ID 0x04 |
||
3046 | #define ASIC_EXT_TV_ENCODER_ID 0x06 |
||
3047 | #define ASIC_INT_DVO_ENCODER_ID 0x07 |
||
3048 | #define ASIC_INT_DIG2_ENCODER_ID 0x09 |
||
3049 | #define ASIC_EXT_DIG_ENCODER_ID 0x05 |
||
1430 | serge | 3050 | #define ASIC_EXT_DIG2_ENCODER_ID 0x08 |
3051 | #define ASIC_INT_DIG3_ENCODER_ID 0x0a |
||
3052 | #define ASIC_INT_DIG4_ENCODER_ID 0x0b |
||
3053 | #define ASIC_INT_DIG5_ENCODER_ID 0x0c |
||
3054 | #define ASIC_INT_DIG6_ENCODER_ID 0x0d |
||
2997 | Serge | 3055 | #define ASIC_INT_DIG7_ENCODER_ID 0x0e |
1117 | serge | 3056 | |
1430 | serge | 3057 | //define Encoder attribute |
1117 | serge | 3058 | #define ATOM_ANALOG_ENCODER 0 |
6104 | serge | 3059 | #define ATOM_DIGITAL_ENCODER 1 |
1430 | serge | 3060 | #define ATOM_DP_ENCODER 2 |
1117 | serge | 3061 | |
1430 | serge | 3062 | #define ATOM_ENCODER_ENUM_MASK 0x70 |
3063 | #define ATOM_ENCODER_ENUM_ID1 0x00 |
||
3064 | #define ATOM_ENCODER_ENUM_ID2 0x10 |
||
3065 | #define ATOM_ENCODER_ENUM_ID3 0x20 |
||
3066 | #define ATOM_ENCODER_ENUM_ID4 0x30 |
||
3067 | #define ATOM_ENCODER_ENUM_ID5 0x40 |
||
3068 | #define ATOM_ENCODER_ENUM_ID6 0x50 |
||
3069 | |||
1117 | serge | 3070 | #define ATOM_DEVICE_CRT1_INDEX 0x00000000 |
3071 | #define ATOM_DEVICE_LCD1_INDEX 0x00000001 |
||
3072 | #define ATOM_DEVICE_TV1_INDEX 0x00000002 |
||
3073 | #define ATOM_DEVICE_DFP1_INDEX 0x00000003 |
||
3074 | #define ATOM_DEVICE_CRT2_INDEX 0x00000004 |
||
3075 | #define ATOM_DEVICE_LCD2_INDEX 0x00000005 |
||
1430 | serge | 3076 | #define ATOM_DEVICE_DFP6_INDEX 0x00000006 |
1117 | serge | 3077 | #define ATOM_DEVICE_DFP2_INDEX 0x00000007 |
3078 | #define ATOM_DEVICE_CV_INDEX 0x00000008 |
||
6104 | serge | 3079 | #define ATOM_DEVICE_DFP3_INDEX 0x00000009 |
3080 | #define ATOM_DEVICE_DFP4_INDEX 0x0000000A |
||
3081 | #define ATOM_DEVICE_DFP5_INDEX 0x0000000B |
||
1430 | serge | 3082 | |
1117 | serge | 3083 | #define ATOM_DEVICE_RESERVEDC_INDEX 0x0000000C |
3084 | #define ATOM_DEVICE_RESERVEDD_INDEX 0x0000000D |
||
3085 | #define ATOM_DEVICE_RESERVEDE_INDEX 0x0000000E |
||
3086 | #define ATOM_DEVICE_RESERVEDF_INDEX 0x0000000F |
||
3087 | #define ATOM_MAX_SUPPORTED_DEVICE_INFO (ATOM_DEVICE_DFP3_INDEX+1) |
||
3088 | #define ATOM_MAX_SUPPORTED_DEVICE_INFO_2 ATOM_MAX_SUPPORTED_DEVICE_INFO |
||
1430 | serge | 3089 | #define ATOM_MAX_SUPPORTED_DEVICE_INFO_3 (ATOM_DEVICE_DFP5_INDEX + 1 ) |
1117 | serge | 3090 | |
3091 | #define ATOM_MAX_SUPPORTED_DEVICE (ATOM_DEVICE_RESERVEDF_INDEX+1) |
||
3092 | |||
1430 | serge | 3093 | #define ATOM_DEVICE_CRT1_SUPPORT (0x1L << ATOM_DEVICE_CRT1_INDEX ) |
3094 | #define ATOM_DEVICE_LCD1_SUPPORT (0x1L << ATOM_DEVICE_LCD1_INDEX ) |
||
3095 | #define ATOM_DEVICE_TV1_SUPPORT (0x1L << ATOM_DEVICE_TV1_INDEX ) |
||
3096 | #define ATOM_DEVICE_DFP1_SUPPORT (0x1L << ATOM_DEVICE_DFP1_INDEX ) |
||
3097 | #define ATOM_DEVICE_CRT2_SUPPORT (0x1L << ATOM_DEVICE_CRT2_INDEX ) |
||
3098 | #define ATOM_DEVICE_LCD2_SUPPORT (0x1L << ATOM_DEVICE_LCD2_INDEX ) |
||
3099 | #define ATOM_DEVICE_DFP6_SUPPORT (0x1L << ATOM_DEVICE_DFP6_INDEX ) |
||
3100 | #define ATOM_DEVICE_DFP2_SUPPORT (0x1L << ATOM_DEVICE_DFP2_INDEX ) |
||
3101 | #define ATOM_DEVICE_CV_SUPPORT (0x1L << ATOM_DEVICE_CV_INDEX ) |
||
3102 | #define ATOM_DEVICE_DFP3_SUPPORT (0x1L << ATOM_DEVICE_DFP3_INDEX ) |
||
6104 | serge | 3103 | #define ATOM_DEVICE_DFP4_SUPPORT (0x1L << ATOM_DEVICE_DFP4_INDEX ) |
1430 | serge | 3104 | #define ATOM_DEVICE_DFP5_SUPPORT (0x1L << ATOM_DEVICE_DFP5_INDEX ) |
1117 | serge | 3105 | |
1430 | serge | 3106 | #define ATOM_DEVICE_CRT_SUPPORT (ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT) |
3107 | #define ATOM_DEVICE_DFP_SUPPORT (ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_DFP3_SUPPORT | ATOM_DEVICE_DFP4_SUPPORT | ATOM_DEVICE_DFP5_SUPPORT | ATOM_DEVICE_DFP6_SUPPORT) |
||
3108 | #define ATOM_DEVICE_TV_SUPPORT (ATOM_DEVICE_TV1_SUPPORT) |
||
3109 | #define ATOM_DEVICE_LCD_SUPPORT (ATOM_DEVICE_LCD1_SUPPORT | ATOM_DEVICE_LCD2_SUPPORT) |
||
1117 | serge | 3110 | |
3111 | #define ATOM_DEVICE_CONNECTOR_TYPE_MASK 0x000000F0 |
||
3112 | #define ATOM_DEVICE_CONNECTOR_TYPE_SHIFT 0x00000004 |
||
3113 | #define ATOM_DEVICE_CONNECTOR_VGA 0x00000001 |
||
3114 | #define ATOM_DEVICE_CONNECTOR_DVI_I 0x00000002 |
||
3115 | #define ATOM_DEVICE_CONNECTOR_DVI_D 0x00000003 |
||
3116 | #define ATOM_DEVICE_CONNECTOR_DVI_A 0x00000004 |
||
3117 | #define ATOM_DEVICE_CONNECTOR_SVIDEO 0x00000005 |
||
3118 | #define ATOM_DEVICE_CONNECTOR_COMPOSITE 0x00000006 |
||
3119 | #define ATOM_DEVICE_CONNECTOR_LVDS 0x00000007 |
||
3120 | #define ATOM_DEVICE_CONNECTOR_DIGI_LINK 0x00000008 |
||
3121 | #define ATOM_DEVICE_CONNECTOR_SCART 0x00000009 |
||
3122 | #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_A 0x0000000A |
||
3123 | #define ATOM_DEVICE_CONNECTOR_HDMI_TYPE_B 0x0000000B |
||
3124 | #define ATOM_DEVICE_CONNECTOR_CASE_1 0x0000000E |
||
3125 | #define ATOM_DEVICE_CONNECTOR_DISPLAYPORT 0x0000000F |
||
3126 | |||
1430 | serge | 3127 | |
1117 | serge | 3128 | #define ATOM_DEVICE_DAC_INFO_MASK 0x0000000F |
3129 | #define ATOM_DEVICE_DAC_INFO_SHIFT 0x00000000 |
||
3130 | #define ATOM_DEVICE_DAC_INFO_NODAC 0x00000000 |
||
3131 | #define ATOM_DEVICE_DAC_INFO_DACA 0x00000001 |
||
3132 | #define ATOM_DEVICE_DAC_INFO_DACB 0x00000002 |
||
3133 | #define ATOM_DEVICE_DAC_INFO_EXDAC 0x00000003 |
||
3134 | |||
3135 | #define ATOM_DEVICE_I2C_ID_NOI2C 0x00000000 |
||
3136 | |||
3137 | #define ATOM_DEVICE_I2C_LINEMUX_MASK 0x0000000F |
||
3138 | #define ATOM_DEVICE_I2C_LINEMUX_SHIFT 0x00000000 |
||
3139 | |||
3140 | #define ATOM_DEVICE_I2C_ID_MASK 0x00000070 |
||
3141 | #define ATOM_DEVICE_I2C_ID_SHIFT 0x00000004 |
||
3142 | #define ATOM_DEVICE_I2C_ID_IS_FOR_NON_MM_USE 0x00000001 |
||
3143 | #define ATOM_DEVICE_I2C_ID_IS_FOR_MM_USE 0x00000002 |
||
1430 | serge | 3144 | #define ATOM_DEVICE_I2C_ID_IS_FOR_SDVO_USE 0x00000003 //For IGP RS600 |
3145 | #define ATOM_DEVICE_I2C_ID_IS_FOR_DAC_SCL 0x00000004 //For IGP RS690 |
||
1117 | serge | 3146 | |
3147 | #define ATOM_DEVICE_I2C_HARDWARE_CAP_MASK 0x00000080 |
||
3148 | #define ATOM_DEVICE_I2C_HARDWARE_CAP_SHIFT 0x00000007 |
||
3149 | #define ATOM_DEVICE_USES_SOFTWARE_ASSISTED_I2C 0x00000000 |
||
3150 | #define ATOM_DEVICE_USES_HARDWARE_ASSISTED_I2C 0x00000001 |
||
3151 | |||
1430 | serge | 3152 | // usDeviceSupport: |
3153 | // Bits0 = 0 - no CRT1 support= 1- CRT1 is supported |
||
3154 | // Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported |
||
3155 | // Bit 2 = 0 - no TV1 support= 1- TV1 is supported |
||
3156 | // Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported |
||
3157 | // Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported |
||
3158 | // Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported |
||
3159 | // Bit 6 = 0 - no DFP6 support= 1- DFP6 is supported |
||
3160 | // Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported |
||
3161 | // Bit 8 = 0 - no CV support= 1- CV is supported |
||
3162 | // Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported |
||
3163 | // Bit 10 = 0 - no DFP4 support= 1- DFP4 is supported |
||
3164 | // Bit 11 = 0 - no DFP5 support= 1- DFP5 is supported |
||
3165 | // |
||
3166 | // |
||
1117 | serge | 3167 | |
1430 | serge | 3168 | /****************************************************************************/ |
3169 | /* Structure used in MclkSS_InfoTable */ |
||
3170 | /****************************************************************************/ |
||
3171 | // ucI2C_ConfigID |
||
3172 | // [7:0] - I2C LINE Associate ID |
||
3173 | // = 0 - no I2C |
||
3174 | // [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection) |
||
3175 | // = 0, [6:0]=SW assisted I2C ID |
||
3176 | // [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use |
||
3177 | // = 2, HW engine for Multimedia use |
||
3178 | // = 3-7 Reserved for future I2C engines |
||
3179 | // [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C |
||
1117 | serge | 3180 | |
1430 | serge | 3181 | typedef struct _ATOM_I2C_ID_CONFIG |
3182 | { |
||
1117 | serge | 3183 | #if ATOM_BIG_ENDIAN |
6104 | serge | 3184 | UCHAR bfHW_Capable:1; |
3185 | UCHAR bfHW_EngineID:3; |
||
3186 | UCHAR bfI2C_LineMux:4; |
||
1117 | serge | 3187 | #else |
6104 | serge | 3188 | UCHAR bfI2C_LineMux:4; |
3189 | UCHAR bfHW_EngineID:3; |
||
3190 | UCHAR bfHW_Capable:1; |
||
1117 | serge | 3191 | #endif |
1430 | serge | 3192 | }ATOM_I2C_ID_CONFIG; |
1117 | serge | 3193 | |
1430 | serge | 3194 | typedef union _ATOM_I2C_ID_CONFIG_ACCESS |
3195 | { |
||
6104 | serge | 3196 | ATOM_I2C_ID_CONFIG sbfAccess; |
3197 | UCHAR ucAccess; |
||
1430 | serge | 3198 | }ATOM_I2C_ID_CONFIG_ACCESS; |
3199 | |||
1117 | serge | 3200 | |
6104 | serge | 3201 | /****************************************************************************/ |
1430 | serge | 3202 | // Structure used in GPIO_I2C_InfoTable |
6104 | serge | 3203 | /****************************************************************************/ |
1430 | serge | 3204 | typedef struct _ATOM_GPIO_I2C_ASSIGMENT |
3205 | { |
||
6104 | serge | 3206 | USHORT usClkMaskRegisterIndex; |
3207 | USHORT usClkEnRegisterIndex; |
||
3208 | USHORT usClkY_RegisterIndex; |
||
3209 | USHORT usClkA_RegisterIndex; |
||
3210 | USHORT usDataMaskRegisterIndex; |
||
3211 | USHORT usDataEnRegisterIndex; |
||
3212 | USHORT usDataY_RegisterIndex; |
||
3213 | USHORT usDataA_RegisterIndex; |
||
3214 | ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; |
||
3215 | UCHAR ucClkMaskShift; |
||
3216 | UCHAR ucClkEnShift; |
||
3217 | UCHAR ucClkY_Shift; |
||
3218 | UCHAR ucClkA_Shift; |
||
3219 | UCHAR ucDataMaskShift; |
||
3220 | UCHAR ucDataEnShift; |
||
3221 | UCHAR ucDataY_Shift; |
||
3222 | UCHAR ucDataA_Shift; |
||
3223 | UCHAR ucReserved1; |
||
3224 | UCHAR ucReserved2; |
||
1430 | serge | 3225 | }ATOM_GPIO_I2C_ASSIGMENT; |
1117 | serge | 3226 | |
1430 | serge | 3227 | typedef struct _ATOM_GPIO_I2C_INFO |
3228 | { |
||
6104 | serge | 3229 | ATOM_COMMON_TABLE_HEADER sHeader; |
3230 | ATOM_GPIO_I2C_ASSIGMENT asGPIO_Info[ATOM_MAX_SUPPORTED_DEVICE]; |
||
1430 | serge | 3231 | }ATOM_GPIO_I2C_INFO; |
1117 | serge | 3232 | |
6104 | serge | 3233 | /****************************************************************************/ |
1430 | serge | 3234 | // Common Structure used in other structures |
6104 | serge | 3235 | /****************************************************************************/ |
1117 | serge | 3236 | |
3237 | #ifndef _H2INC |
||
6104 | serge | 3238 | |
1430 | serge | 3239 | //Please don't add or expand this bitfield structure below, this one will retire soon.! |
3240 | typedef struct _ATOM_MODE_MISC_INFO |
||
3241 | { |
||
1117 | serge | 3242 | #if ATOM_BIG_ENDIAN |
6104 | serge | 3243 | USHORT Reserved:6; |
3244 | USHORT RGB888:1; |
||
3245 | USHORT DoubleClock:1; |
||
3246 | USHORT Interlace:1; |
||
3247 | USHORT CompositeSync:1; |
||
3248 | USHORT V_ReplicationBy2:1; |
||
3249 | USHORT H_ReplicationBy2:1; |
||
3250 | USHORT VerticalCutOff:1; |
||
1430 | serge | 3251 | USHORT VSyncPolarity:1; //0=Active High, 1=Active Low |
3252 | USHORT HSyncPolarity:1; //0=Active High, 1=Active Low |
||
6104 | serge | 3253 | USHORT HorizontalCutOff:1; |
1117 | serge | 3254 | #else |
6104 | serge | 3255 | USHORT HorizontalCutOff:1; |
1430 | serge | 3256 | USHORT HSyncPolarity:1; //0=Active High, 1=Active Low |
3257 | USHORT VSyncPolarity:1; //0=Active High, 1=Active Low |
||
6104 | serge | 3258 | USHORT VerticalCutOff:1; |
3259 | USHORT H_ReplicationBy2:1; |
||
3260 | USHORT V_ReplicationBy2:1; |
||
3261 | USHORT CompositeSync:1; |
||
3262 | USHORT Interlace:1; |
||
3263 | USHORT DoubleClock:1; |
||
3264 | USHORT RGB888:1; |
||
3265 | USHORT Reserved:6; |
||
1117 | serge | 3266 | #endif |
1430 | serge | 3267 | }ATOM_MODE_MISC_INFO; |
6104 | serge | 3268 | |
1430 | serge | 3269 | typedef union _ATOM_MODE_MISC_INFO_ACCESS |
3270 | { |
||
6104 | serge | 3271 | ATOM_MODE_MISC_INFO sbfAccess; |
3272 | USHORT usAccess; |
||
1430 | serge | 3273 | }ATOM_MODE_MISC_INFO_ACCESS; |
6104 | serge | 3274 | |
1117 | serge | 3275 | #else |
6104 | serge | 3276 | |
1430 | serge | 3277 | typedef union _ATOM_MODE_MISC_INFO_ACCESS |
3278 | { |
||
6104 | serge | 3279 | USHORT usAccess; |
1430 | serge | 3280 | }ATOM_MODE_MISC_INFO_ACCESS; |
6104 | serge | 3281 | |
1117 | serge | 3282 | #endif |
3283 | |||
1430 | serge | 3284 | // usModeMiscInfo- |
1117 | serge | 3285 | #define ATOM_H_CUTOFF 0x01 |
1430 | serge | 3286 | #define ATOM_HSYNC_POLARITY 0x02 //0=Active High, 1=Active Low |
3287 | #define ATOM_VSYNC_POLARITY 0x04 //0=Active High, 1=Active Low |
||
1117 | serge | 3288 | #define ATOM_V_CUTOFF 0x08 |
3289 | #define ATOM_H_REPLICATIONBY2 0x10 |
||
3290 | #define ATOM_V_REPLICATIONBY2 0x20 |
||
3291 | #define ATOM_COMPOSITESYNC 0x40 |
||
3292 | #define ATOM_INTERLACE 0x80 |
||
3293 | #define ATOM_DOUBLE_CLOCK_MODE 0x100 |
||
3294 | #define ATOM_RGB888_MODE 0x200 |
||
3295 | |||
1430 | serge | 3296 | //usRefreshRate- |
1117 | serge | 3297 | #define ATOM_REFRESH_43 43 |
3298 | #define ATOM_REFRESH_47 47 |
||
6104 | serge | 3299 | #define ATOM_REFRESH_56 56 |
1117 | serge | 3300 | #define ATOM_REFRESH_60 60 |
3301 | #define ATOM_REFRESH_65 65 |
||
3302 | #define ATOM_REFRESH_70 70 |
||
3303 | #define ATOM_REFRESH_72 72 |
||
3304 | #define ATOM_REFRESH_75 75 |
||
3305 | #define ATOM_REFRESH_85 85 |
||
3306 | |||
1430 | serge | 3307 | // ATOM_MODE_TIMING data are exactly the same as VESA timing data. |
3308 | // Translation from EDID to ATOM_MODE_TIMING, use the following formula. |
||
3309 | // |
||
3310 | // VESA_HTOTAL = VESA_ACTIVE + 2* VESA_BORDER + VESA_BLANK |
||
3311 | // = EDID_HA + EDID_HBL |
||
3312 | // VESA_HDISP = VESA_ACTIVE = EDID_HA |
||
3313 | // VESA_HSYNC_START = VESA_ACTIVE + VESA_BORDER + VESA_FRONT_PORCH |
||
3314 | // = EDID_HA + EDID_HSO |
||
3315 | // VESA_HSYNC_WIDTH = VESA_HSYNC_TIME = EDID_HSPW |
||
3316 | // VESA_BORDER = EDID_BORDER |
||
1117 | serge | 3317 | |
6104 | serge | 3318 | /****************************************************************************/ |
1430 | serge | 3319 | // Structure used in SetCRTC_UsingDTDTimingTable |
6104 | serge | 3320 | /****************************************************************************/ |
1430 | serge | 3321 | typedef struct _SET_CRTC_USING_DTD_TIMING_PARAMETERS |
3322 | { |
||
6104 | serge | 3323 | USHORT usH_Size; |
3324 | USHORT usH_Blanking_Time; |
||
3325 | USHORT usV_Size; |
||
3326 | USHORT usV_Blanking_Time; |
||
3327 | USHORT usH_SyncOffset; |
||
3328 | USHORT usH_SyncWidth; |
||
3329 | USHORT usV_SyncOffset; |
||
3330 | USHORT usV_SyncWidth; |
||
3331 | ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; |
||
1430 | serge | 3332 | UCHAR ucH_Border; // From DFP EDID |
6104 | serge | 3333 | UCHAR ucV_Border; |
1430 | serge | 3334 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
6104 | serge | 3335 | UCHAR ucPadding[3]; |
1430 | serge | 3336 | }SET_CRTC_USING_DTD_TIMING_PARAMETERS; |
1117 | serge | 3337 | |
6104 | serge | 3338 | /****************************************************************************/ |
1430 | serge | 3339 | // Structure used in SetCRTC_TimingTable |
6104 | serge | 3340 | /****************************************************************************/ |
1430 | serge | 3341 | typedef struct _SET_CRTC_TIMING_PARAMETERS |
3342 | { |
||
3343 | USHORT usH_Total; // horizontal total |
||
3344 | USHORT usH_Disp; // horizontal display |
||
3345 | USHORT usH_SyncStart; // horozontal Sync start |
||
3346 | USHORT usH_SyncWidth; // horizontal Sync width |
||
3347 | USHORT usV_Total; // vertical total |
||
3348 | USHORT usV_Disp; // vertical display |
||
3349 | USHORT usV_SyncStart; // vertical Sync start |
||
3350 | USHORT usV_SyncWidth; // vertical Sync width |
||
6104 | serge | 3351 | ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; |
1430 | serge | 3352 | UCHAR ucCRTC; // ATOM_CRTC1 or ATOM_CRTC2 |
3353 | UCHAR ucOverscanRight; // right |
||
3354 | UCHAR ucOverscanLeft; // left |
||
3355 | UCHAR ucOverscanBottom; // bottom |
||
3356 | UCHAR ucOverscanTop; // top |
||
6104 | serge | 3357 | UCHAR ucReserved; |
1430 | serge | 3358 | }SET_CRTC_TIMING_PARAMETERS; |
1117 | serge | 3359 | #define SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION SET_CRTC_TIMING_PARAMETERS |
3360 | |||
6104 | serge | 3361 | /****************************************************************************/ |
1430 | serge | 3362 | // Structure used in StandardVESA_TimingTable |
3363 | // AnalogTV_InfoTable |
||
3364 | // ComponentVideoInfoTable |
||
6104 | serge | 3365 | /****************************************************************************/ |
1430 | serge | 3366 | typedef struct _ATOM_MODE_TIMING |
3367 | { |
||
6104 | serge | 3368 | USHORT usCRTC_H_Total; |
3369 | USHORT usCRTC_H_Disp; |
||
3370 | USHORT usCRTC_H_SyncStart; |
||
3371 | USHORT usCRTC_H_SyncWidth; |
||
3372 | USHORT usCRTC_V_Total; |
||
3373 | USHORT usCRTC_V_Disp; |
||
3374 | USHORT usCRTC_V_SyncStart; |
||
3375 | USHORT usCRTC_V_SyncWidth; |
||
1430 | serge | 3376 | USHORT usPixelClock; //in 10Khz unit |
6104 | serge | 3377 | ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; |
3378 | USHORT usCRTC_OverscanRight; |
||
3379 | USHORT usCRTC_OverscanLeft; |
||
3380 | USHORT usCRTC_OverscanBottom; |
||
3381 | USHORT usCRTC_OverscanTop; |
||
3382 | USHORT usReserve; |
||
3383 | UCHAR ucInternalModeNumber; |
||
3384 | UCHAR ucRefreshRate; |
||
1430 | serge | 3385 | }ATOM_MODE_TIMING; |
1117 | serge | 3386 | |
1430 | serge | 3387 | typedef struct _ATOM_DTD_FORMAT |
3388 | { |
||
6104 | serge | 3389 | USHORT usPixClk; |
3390 | USHORT usHActive; |
||
3391 | USHORT usHBlanking_Time; |
||
3392 | USHORT usVActive; |
||
3393 | USHORT usVBlanking_Time; |
||
3394 | USHORT usHSyncOffset; |
||
3395 | USHORT usHSyncWidth; |
||
3396 | USHORT usVSyncOffset; |
||
3397 | USHORT usVSyncWidth; |
||
3398 | USHORT usImageHSize; |
||
3399 | USHORT usImageVSize; |
||
3400 | UCHAR ucHBorder; |
||
3401 | UCHAR ucVBorder; |
||
3402 | ATOM_MODE_MISC_INFO_ACCESS susModeMiscInfo; |
||
3403 | UCHAR ucInternalModeNumber; |
||
3404 | UCHAR ucRefreshRate; |
||
1430 | serge | 3405 | }ATOM_DTD_FORMAT; |
1117 | serge | 3406 | |
6104 | serge | 3407 | /****************************************************************************/ |
1430 | serge | 3408 | // Structure used in LVDS_InfoTable |
3409 | // * Need a document to describe this table |
||
6104 | serge | 3410 | /****************************************************************************/ |
1117 | serge | 3411 | #define SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 |
3412 | #define SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 |
||
3413 | #define SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 |
||
3414 | #define SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 |
||
3415 | |||
1430 | serge | 3416 | //ucTableFormatRevision=1 |
3417 | //ucTableContentRevision=1 |
||
3418 | typedef struct _ATOM_LVDS_INFO |
||
3419 | { |
||
6104 | serge | 3420 | ATOM_COMMON_TABLE_HEADER sHeader; |
3421 | ATOM_DTD_FORMAT sLCDTiming; |
||
3422 | USHORT usModePatchTableOffset; |
||
1430 | serge | 3423 | USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. |
6104 | serge | 3424 | USHORT usOffDelayInMs; |
3425 | UCHAR ucPowerSequenceDigOntoDEin10Ms; |
||
3426 | UCHAR ucPowerSequenceDEtoBLOnin10Ms; |
||
1430 | serge | 3427 | UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} |
3428 | // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} |
||
3429 | // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} |
||
3430 | // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} |
||
6104 | serge | 3431 | UCHAR ucPanelDefaultRefreshRate; |
3432 | UCHAR ucPanelIdentification; |
||
3433 | UCHAR ucSS_Id; |
||
1430 | serge | 3434 | }ATOM_LVDS_INFO; |
1117 | serge | 3435 | |
1430 | serge | 3436 | //ucTableFormatRevision=1 |
3437 | //ucTableContentRevision=2 |
||
3438 | typedef struct _ATOM_LVDS_INFO_V12 |
||
3439 | { |
||
6104 | serge | 3440 | ATOM_COMMON_TABLE_HEADER sHeader; |
3441 | ATOM_DTD_FORMAT sLCDTiming; |
||
3442 | USHORT usExtInfoTableOffset; |
||
1430 | serge | 3443 | USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. |
6104 | serge | 3444 | USHORT usOffDelayInMs; |
3445 | UCHAR ucPowerSequenceDigOntoDEin10Ms; |
||
3446 | UCHAR ucPowerSequenceDEtoBLOnin10Ms; |
||
1430 | serge | 3447 | UCHAR ucLVDS_Misc; // Bit0:{=0:single, =1:dual},Bit1 {=0:666RGB, =1:888RGB},Bit2:3:{Grey level} |
3448 | // Bit4:{=0:LDI format for RGB888, =1 FPDI format for RGB888} |
||
3449 | // Bit5:{=0:Spatial Dithering disabled;1 Spatial Dithering enabled} |
||
3450 | // Bit6:{=0:Temporal Dithering disabled;1 Temporal Dithering enabled} |
||
6104 | serge | 3451 | UCHAR ucPanelDefaultRefreshRate; |
3452 | UCHAR ucPanelIdentification; |
||
3453 | UCHAR ucSS_Id; |
||
3454 | USHORT usLCDVenderID; |
||
3455 | USHORT usLCDProductID; |
||
3456 | UCHAR ucLCDPanel_SpecialHandlingCap; |
||
1430 | serge | 3457 | UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable |
6104 | serge | 3458 | UCHAR ucReserved[2]; |
1430 | serge | 3459 | }ATOM_LVDS_INFO_V12; |
1117 | serge | 3460 | |
1430 | serge | 3461 | //Definitions for ucLCDPanel_SpecialHandlingCap: |
3462 | |||
3463 | //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. |
||
3464 | //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL |
||
3465 | #define LCDPANEL_CAP_READ_EDID 0x1 |
||
3466 | |||
3467 | //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together |
||
3468 | //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static |
||
3469 | //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12 |
||
3470 | #define LCDPANEL_CAP_DRR_SUPPORTED 0x2 |
||
3471 | |||
3472 | //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. |
||
3473 | #define LCDPANEL_CAP_eDP 0x4 |
||
3474 | |||
3475 | |||
3476 | //Color Bit Depth definition in EDID V1.4 @BYTE 14h |
||
3477 | //Bit 6 5 4 |
||
3478 | // 0 0 0 - Color bit depth is undefined |
||
3479 | // 0 0 1 - 6 Bits per Primary Color |
||
3480 | // 0 1 0 - 8 Bits per Primary Color |
||
3481 | // 0 1 1 - 10 Bits per Primary Color |
||
3482 | // 1 0 0 - 12 Bits per Primary Color |
||
3483 | // 1 0 1 - 14 Bits per Primary Color |
||
3484 | // 1 1 0 - 16 Bits per Primary Color |
||
3485 | // 1 1 1 - Reserved |
||
3486 | |||
3487 | #define PANEL_COLOR_BIT_DEPTH_MASK 0x70 |
||
3488 | |||
3489 | // Bit7:{=0:Random Dithering disabled;1 Random Dithering enabled} |
||
3490 | #define PANEL_RANDOM_DITHER 0x80 |
||
3491 | #define PANEL_RANDOM_DITHER_MASK 0x80 |
||
3492 | |||
1963 | serge | 3493 | #define ATOM_LVDS_INFO_LAST ATOM_LVDS_INFO_V12 // no need to change this |
1430 | serge | 3494 | |
1963 | serge | 3495 | /****************************************************************************/ |
3496 | // Structures used by LCD_InfoTable V1.3 Note: previous version was called ATOM_LVDS_INFO_V12 |
||
3497 | // ASIC Families: NI |
||
3498 | // ucTableFormatRevision=1 |
||
3499 | // ucTableContentRevision=3 |
||
3500 | /****************************************************************************/ |
||
3501 | typedef struct _ATOM_LCD_INFO_V13 |
||
3502 | { |
||
3503 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
3504 | ATOM_DTD_FORMAT sLCDTiming; |
||
3505 | USHORT usExtInfoTableOffset; |
||
3506 | USHORT usSupportedRefreshRate; //Refer to panel info table in ATOMBIOS extension Spec. |
||
3507 | ULONG ulReserved0; |
||
3508 | UCHAR ucLCD_Misc; // Reorganized in V13 |
||
3509 | // Bit0: {=0:single, =1:dual}, |
||
3510 | // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888} // was {=0:666RGB, =1:888RGB}, |
||
3511 | // Bit3:2: {Grey level} |
||
3512 | // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h) |
||
3513 | // Bit7 Reserved. was for ATOM_PANEL_MISC_API_ENABLED, still need it? |
||
3514 | UCHAR ucPanelDefaultRefreshRate; |
||
3515 | UCHAR ucPanelIdentification; |
||
3516 | UCHAR ucSS_Id; |
||
3517 | USHORT usLCDVenderID; |
||
3518 | USHORT usLCDProductID; |
||
3519 | UCHAR ucLCDPanel_SpecialHandlingCap; // Reorganized in V13 |
||
3520 | // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own |
||
3521 | // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED |
||
3522 | // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1) |
||
3523 | // Bit7-3: Reserved |
||
3524 | UCHAR ucPanelInfoSize; // start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable |
||
3525 | USHORT usBacklightPWM; // Backlight PWM in Hz. New in _V13 |
||
1117 | serge | 3526 | |
1963 | serge | 3527 | UCHAR ucPowerSequenceDIGONtoDE_in4Ms; |
3528 | UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms; |
||
2997 | Serge | 3529 | UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms; |
1963 | serge | 3530 | UCHAR ucPowerSequenceDEtoDIGON_in4Ms; |
3531 | |||
3532 | UCHAR ucOffDelay_in4Ms; |
||
3533 | UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms; |
||
3534 | UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms; |
||
3535 | UCHAR ucReserved1; |
||
3536 | |||
2997 | Serge | 3537 | UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh |
3538 | UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h |
||
3539 | UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h |
||
3540 | UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h |
||
3541 | |||
3542 | USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode. |
||
3543 | UCHAR uceDPToLVDSRxId; |
||
3544 | UCHAR ucLcdReservd; |
||
3545 | ULONG ulReserved[2]; |
||
1963 | serge | 3546 | }ATOM_LCD_INFO_V13; |
3547 | |||
3548 | #define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13 |
||
3549 | |||
3550 | //Definitions for ucLCD_Misc |
||
3551 | #define ATOM_PANEL_MISC_V13_DUAL 0x00000001 |
||
3552 | #define ATOM_PANEL_MISC_V13_FPDI 0x00000002 |
||
3553 | #define ATOM_PANEL_MISC_V13_GREY_LEVEL 0x0000000C |
||
3554 | #define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT 2 |
||
3555 | #define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK 0x70 |
||
3556 | #define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR 0x10 |
||
3557 | #define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR 0x20 |
||
3558 | |||
3559 | //Color Bit Depth definition in EDID V1.4 @BYTE 14h |
||
3560 | //Bit 6 5 4 |
||
3561 | // 0 0 0 - Color bit depth is undefined |
||
3562 | // 0 0 1 - 6 Bits per Primary Color |
||
3563 | // 0 1 0 - 8 Bits per Primary Color |
||
3564 | // 0 1 1 - 10 Bits per Primary Color |
||
3565 | // 1 0 0 - 12 Bits per Primary Color |
||
3566 | // 1 0 1 - 14 Bits per Primary Color |
||
3567 | // 1 1 0 - 16 Bits per Primary Color |
||
3568 | // 1 1 1 - Reserved |
||
3569 | |||
3570 | //Definitions for ucLCDPanel_SpecialHandlingCap: |
||
3571 | |||
3572 | //Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. |
||
3573 | //Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL |
||
3574 | #define LCDPANEL_CAP_V13_READ_EDID 0x1 // = LCDPANEL_CAP_READ_EDID no change comparing to previous version |
||
3575 | |||
3576 | //If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together |
||
3577 | //with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static |
||
3578 | //refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12 |
||
3579 | #define LCDPANEL_CAP_V13_DRR_SUPPORTED 0x2 // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version |
||
3580 | |||
3581 | //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. |
||
3582 | #define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version |
||
3583 | |||
2997 | Serge | 3584 | //uceDPToLVDSRxId |
3585 | #define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip |
||
3586 | #define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init |
||
3587 | #define eDP_TO_LVDS_RT_ID 0x02 // RT tanslator which require AMD SW init |
||
3588 | |||
1430 | serge | 3589 | typedef struct _ATOM_PATCH_RECORD_MODE |
3590 | { |
||
6104 | serge | 3591 | UCHAR ucRecordType; |
3592 | USHORT usHDisp; |
||
3593 | USHORT usVDisp; |
||
1430 | serge | 3594 | }ATOM_PATCH_RECORD_MODE; |
1117 | serge | 3595 | |
1430 | serge | 3596 | typedef struct _ATOM_LCD_RTS_RECORD |
3597 | { |
||
6104 | serge | 3598 | UCHAR ucRecordType; |
3599 | UCHAR ucRTSValue; |
||
1430 | serge | 3600 | }ATOM_LCD_RTS_RECORD; |
1117 | serge | 3601 | |
1430 | serge | 3602 | //!! If the record below exits, it shoud always be the first record for easy use in command table!!! |
3603 | // The record below is only used when LVDS_Info is present. From ATOM_LVDS_INFO_V12, use ucLCDPanel_SpecialHandlingCap instead. |
||
3604 | typedef struct _ATOM_LCD_MODE_CONTROL_CAP |
||
3605 | { |
||
6104 | serge | 3606 | UCHAR ucRecordType; |
3607 | USHORT usLCDCap; |
||
1430 | serge | 3608 | }ATOM_LCD_MODE_CONTROL_CAP; |
1117 | serge | 3609 | |
3610 | #define LCD_MODE_CAP_BL_OFF 1 |
||
3611 | #define LCD_MODE_CAP_CRTC_OFF 2 |
||
3612 | #define LCD_MODE_CAP_PANEL_OFF 4 |
||
3613 | |||
1430 | serge | 3614 | typedef struct _ATOM_FAKE_EDID_PATCH_RECORD |
3615 | { |
||
6104 | serge | 3616 | UCHAR ucRecordType; |
3617 | UCHAR ucFakeEDIDLength; |
||
1430 | serge | 3618 | UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements. |
1117 | serge | 3619 | } ATOM_FAKE_EDID_PATCH_RECORD; |
3620 | |||
1430 | serge | 3621 | typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD |
3622 | { |
||
6104 | serge | 3623 | UCHAR ucRecordType; |
3624 | USHORT usHSize; |
||
3625 | USHORT usVSize; |
||
1430 | serge | 3626 | }ATOM_PANEL_RESOLUTION_PATCH_RECORD; |
1117 | serge | 3627 | |
3628 | #define LCD_MODE_PATCH_RECORD_MODE_TYPE 1 |
||
3629 | #define LCD_RTS_RECORD_TYPE 2 |
||
3630 | #define LCD_CAP_RECORD_TYPE 3 |
||
3631 | #define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4 |
||
3632 | #define LCD_PANEL_RESOLUTION_RECORD_TYPE 5 |
||
2997 | Serge | 3633 | #define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6 |
1117 | serge | 3634 | #define ATOM_RECORD_END_TYPE 0xFF |
3635 | |||
3636 | /****************************Spread Spectrum Info Table Definitions **********************/ |
||
3637 | |||
1430 | serge | 3638 | //ucTableFormatRevision=1 |
3639 | //ucTableContentRevision=2 |
||
3640 | typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT |
||
3641 | { |
||
6104 | serge | 3642 | USHORT usSpreadSpectrumPercentage; |
1430 | serge | 3643 | UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int. Bit2=1: PCIE REFCLK SS =0 iternal PPLL SS Others:TBD |
6104 | serge | 3644 | UCHAR ucSS_Step; |
3645 | UCHAR ucSS_Delay; |
||
3646 | UCHAR ucSS_Id; |
||
3647 | UCHAR ucRecommendedRef_Div; |
||
1430 | serge | 3648 | UCHAR ucSS_Range; //it was reserved for V11 |
3649 | }ATOM_SPREAD_SPECTRUM_ASSIGNMENT; |
||
1117 | serge | 3650 | |
3651 | #define ATOM_MAX_SS_ENTRY 16 |
||
1430 | serge | 3652 | #define ATOM_DP_SS_ID1 0x0f1 // SS ID for internal DP stream at 2.7Ghz. if ATOM_DP_SS_ID2 does not exist in SS_InfoTable, it is used for internal DP stream at 1.62Ghz as well. |
3653 | #define ATOM_DP_SS_ID2 0x0f2 // SS ID for internal DP stream at 1.62Ghz, if it exists in SS_InfoTable. |
||
3654 | #define ATOM_LVLINK_2700MHz_SS_ID 0x0f3 // SS ID for LV link translator chip at 2.7Ghz |
||
3655 | #define ATOM_LVLINK_1620MHz_SS_ID 0x0f4 // SS ID for LV link translator chip at 1.62Ghz |
||
1117 | serge | 3656 | |
1430 | serge | 3657 | |
1117 | serge | 3658 | #define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000 |
3659 | #define ATOM_SS_DOWN_SPREAD_MODE 0x00000000 |
||
3660 | #define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 |
||
3661 | #define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001 |
||
3662 | #define ATOM_INTERNAL_SS_MASK 0x00000000 |
||
3663 | #define ATOM_EXTERNAL_SS_MASK 0x00000002 |
||
3664 | #define EXEC_SS_STEP_SIZE_SHIFT 2 |
||
6104 | serge | 3665 | #define EXEC_SS_DELAY_SHIFT 4 |
1117 | serge | 3666 | #define ACTIVEDATA_TO_BLON_DELAY_SHIFT 4 |
3667 | |||
1430 | serge | 3668 | typedef struct _ATOM_SPREAD_SPECTRUM_INFO |
3669 | { |
||
6104 | serge | 3670 | ATOM_COMMON_TABLE_HEADER sHeader; |
3671 | ATOM_SPREAD_SPECTRUM_ASSIGNMENT asSS_Info[ATOM_MAX_SS_ENTRY]; |
||
1430 | serge | 3672 | }ATOM_SPREAD_SPECTRUM_INFO; |
1117 | serge | 3673 | |
6104 | serge | 3674 | /****************************************************************************/ |
1430 | serge | 3675 | // Structure used in AnalogTV_InfoTable (Top level) |
6104 | serge | 3676 | /****************************************************************************/ |
1963 | serge | 3677 | //ucTVBootUpDefaultStd definition: |
1117 | serge | 3678 | |
1430 | serge | 3679 | //ATOM_TV_NTSC 1 |
3680 | //ATOM_TV_NTSCJ 2 |
||
3681 | //ATOM_TV_PAL 3 |
||
3682 | //ATOM_TV_PALM 4 |
||
3683 | //ATOM_TV_PALCN 5 |
||
3684 | //ATOM_TV_PALN 6 |
||
3685 | //ATOM_TV_PAL60 7 |
||
3686 | //ATOM_TV_SECAM 8 |
||
1117 | serge | 3687 | |
1430 | serge | 3688 | //ucTVSupportedStd definition: |
1117 | serge | 3689 | #define NTSC_SUPPORT 0x1 |
3690 | #define NTSCJ_SUPPORT 0x2 |
||
3691 | |||
3692 | #define PAL_SUPPORT 0x4 |
||
3693 | #define PALM_SUPPORT 0x8 |
||
3694 | #define PALCN_SUPPORT 0x10 |
||
3695 | #define PALN_SUPPORT 0x20 |
||
3696 | #define PAL60_SUPPORT 0x40 |
||
3697 | #define SECAM_SUPPORT 0x80 |
||
3698 | |||
3699 | #define MAX_SUPPORTED_TV_TIMING 2 |
||
3700 | |||
1430 | serge | 3701 | typedef struct _ATOM_ANALOG_TV_INFO |
3702 | { |
||
6104 | serge | 3703 | ATOM_COMMON_TABLE_HEADER sHeader; |
3704 | UCHAR ucTV_SupportedStandard; |
||
3705 | UCHAR ucTV_BootUpDefaultStandard; |
||
3706 | UCHAR ucExt_TV_ASIC_ID; |
||
3707 | UCHAR ucExt_TV_ASIC_SlaveAddr; |
||
1430 | serge | 3708 | /*ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];*/ |
6104 | serge | 3709 | ATOM_MODE_TIMING aModeTimings[MAX_SUPPORTED_TV_TIMING]; |
1430 | serge | 3710 | }ATOM_ANALOG_TV_INFO; |
1117 | serge | 3711 | |
1179 | serge | 3712 | #define MAX_SUPPORTED_TV_TIMING_V1_2 3 |
3713 | |||
1430 | serge | 3714 | typedef struct _ATOM_ANALOG_TV_INFO_V1_2 |
3715 | { |
||
6104 | serge | 3716 | ATOM_COMMON_TABLE_HEADER sHeader; |
3717 | UCHAR ucTV_SupportedStandard; |
||
3718 | UCHAR ucTV_BootUpDefaultStandard; |
||
3719 | UCHAR ucExt_TV_ASIC_ID; |
||
3720 | UCHAR ucExt_TV_ASIC_SlaveAddr; |
||
1963 | serge | 3721 | ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2]; |
1430 | serge | 3722 | }ATOM_ANALOG_TV_INFO_V1_2; |
1179 | serge | 3723 | |
1430 | serge | 3724 | typedef struct _ATOM_DPCD_INFO |
3725 | { |
||
3726 | UCHAR ucRevisionNumber; //10h : Revision 1.0; 11h : Revision 1.1 |
||
3727 | UCHAR ucMaxLinkRate; //06h : 1.62Gbps per lane; 0Ah = 2.7Gbps per lane |
||
3728 | UCHAR ucMaxLane; //Bits 4:0 = MAX_LANE_COUNT (1/2/4). Bit 7 = ENHANCED_FRAME_CAP |
||
3729 | UCHAR ucMaxDownSpread; //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change according to DP spec) |
||
3730 | }ATOM_DPCD_INFO; |
||
3731 | |||
3732 | #define ATOM_DPCD_MAX_LANE_MASK 0x1F |
||
3733 | |||
1117 | serge | 3734 | /**************************************************************************/ |
1430 | serge | 3735 | // VRAM usage and their defintions |
1117 | serge | 3736 | |
1430 | serge | 3737 | // One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. |
3738 | // Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. |
||
3739 | // All the addresses below are the offsets from the frame buffer start.They all MUST be Dword aligned! |
||
3740 | // To driver: The physical address of this memory portion=mmFB_START(4K aligned)+ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR |
||
3741 | // To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX |
||
1117 | serge | 3742 | |
3743 | #ifndef VESA_MEMORY_IN_64K_BLOCK |
||
1430 | serge | 3744 | #define VESA_MEMORY_IN_64K_BLOCK 0x100 //256*64K=16Mb (Max. VESA memory is 16Mb!) |
1117 | serge | 3745 | #endif |
3746 | |||
1430 | serge | 3747 | #define ATOM_EDID_RAW_DATASIZE 256 //In Bytes |
3748 | #define ATOM_HWICON_SURFACE_SIZE 4096 //In Bytes |
||
1117 | serge | 3749 | #define ATOM_HWICON_INFOTABLE_SIZE 32 |
3750 | #define MAX_DTD_MODE_IN_VRAM 6 |
||
1430 | serge | 3751 | #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE (MAX_DTD_MODE_IN_VRAM*28) //28= (SIZEOF ATOM_DTD_FORMAT) |
3752 | #define ATOM_STD_MODE_SUPPORT_TBL_SIZE 32*8 //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT) |
||
1963 | serge | 3753 | //20 bytes for Encoder Type and DPCD in STD EDID area |
3754 | #define DFP_ENCODER_TYPE_OFFSET (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20) |
||
3755 | #define ATOM_DP_DPCD_OFFSET (DFP_ENCODER_TYPE_OFFSET + 4 ) |
||
1117 | serge | 3756 | |
3757 | #define ATOM_HWICON1_SURFACE_ADDR 0 |
||
3758 | #define ATOM_HWICON2_SURFACE_ADDR (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) |
||
3759 | #define ATOM_HWICON_INFOTABLE_ADDR (ATOM_HWICON2_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE) |
||
3760 | #define ATOM_CRT1_EDID_ADDR (ATOM_HWICON_INFOTABLE_ADDR + ATOM_HWICON_INFOTABLE_SIZE) |
||
3761 | #define ATOM_CRT1_DTD_MODE_TBL_ADDR (ATOM_CRT1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3762 | #define ATOM_CRT1_STD_MODE_TBL_ADDR (ATOM_CRT1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3763 | |||
3764 | #define ATOM_LCD1_EDID_ADDR (ATOM_CRT1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3765 | #define ATOM_LCD1_DTD_MODE_TBL_ADDR (ATOM_LCD1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
6104 | serge | 3766 | #define ATOM_LCD1_STD_MODE_TBL_ADDR (ATOM_LCD1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
1117 | serge | 3767 | |
3768 | #define ATOM_TV1_DTD_MODE_TBL_ADDR (ATOM_LCD1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3769 | |||
3770 | #define ATOM_DFP1_EDID_ADDR (ATOM_TV1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3771 | #define ATOM_DFP1_DTD_MODE_TBL_ADDR (ATOM_DFP1_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3772 | #define ATOM_DFP1_STD_MODE_TBL_ADDR (ATOM_DFP1_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3773 | |||
3774 | #define ATOM_CRT2_EDID_ADDR (ATOM_DFP1_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3775 | #define ATOM_CRT2_DTD_MODE_TBL_ADDR (ATOM_CRT2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3776 | #define ATOM_CRT2_STD_MODE_TBL_ADDR (ATOM_CRT2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3777 | |||
3778 | #define ATOM_LCD2_EDID_ADDR (ATOM_CRT2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3779 | #define ATOM_LCD2_DTD_MODE_TBL_ADDR (ATOM_LCD2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
6104 | serge | 3780 | #define ATOM_LCD2_STD_MODE_TBL_ADDR (ATOM_LCD2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
1117 | serge | 3781 | |
1430 | serge | 3782 | #define ATOM_DFP6_EDID_ADDR (ATOM_LCD2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
3783 | #define ATOM_DFP6_DTD_MODE_TBL_ADDR (ATOM_DFP6_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3784 | #define ATOM_DFP6_STD_MODE_TBL_ADDR (ATOM_DFP6_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
1117 | serge | 3785 | |
1430 | serge | 3786 | #define ATOM_DFP2_EDID_ADDR (ATOM_DFP6_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
1117 | serge | 3787 | #define ATOM_DFP2_DTD_MODE_TBL_ADDR (ATOM_DFP2_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
3788 | #define ATOM_DFP2_STD_MODE_TBL_ADDR (ATOM_DFP2_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3789 | |||
3790 | #define ATOM_CV_EDID_ADDR (ATOM_DFP2_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3791 | #define ATOM_CV_DTD_MODE_TBL_ADDR (ATOM_CV_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3792 | #define ATOM_CV_STD_MODE_TBL_ADDR (ATOM_CV_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3793 | |||
3794 | #define ATOM_DFP3_EDID_ADDR (ATOM_CV_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3795 | #define ATOM_DFP3_DTD_MODE_TBL_ADDR (ATOM_DFP3_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3796 | #define ATOM_DFP3_STD_MODE_TBL_ADDR (ATOM_DFP3_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3797 | |||
3798 | #define ATOM_DFP4_EDID_ADDR (ATOM_DFP3_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3799 | #define ATOM_DFP4_DTD_MODE_TBL_ADDR (ATOM_DFP4_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3800 | #define ATOM_DFP4_STD_MODE_TBL_ADDR (ATOM_DFP4_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3801 | |||
3802 | #define ATOM_DFP5_EDID_ADDR (ATOM_DFP4_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
||
3803 | #define ATOM_DFP5_DTD_MODE_TBL_ADDR (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE) |
||
3804 | #define ATOM_DFP5_STD_MODE_TBL_ADDR (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE) |
||
3805 | |||
1963 | serge | 3806 | #define ATOM_DP_TRAINING_TBL_ADDR (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE) |
1117 | serge | 3807 | |
1963 | serge | 3808 | #define ATOM_STACK_STORAGE_START (ATOM_DP_TRAINING_TBL_ADDR + 1024) |
3809 | #define ATOM_STACK_STORAGE_END ATOM_STACK_STORAGE_START + 512 |
||
1117 | serge | 3810 | |
1430 | serge | 3811 | //The size below is in Kb! |
1117 | serge | 3812 | #define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC) |
6104 | serge | 3813 | |
1963 | serge | 3814 | #define ATOM_VRAM_RESERVE_V2_SIZE 32 |
3815 | |||
1117 | serge | 3816 | #define ATOM_VRAM_OPERATION_FLAGS_MASK 0xC0000000L |
3817 | #define ATOM_VRAM_OPERATION_FLAGS_SHIFT 30 |
||
3818 | #define ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION 0x1 |
||
3819 | #define ATOM_VRAM_BLOCK_NEEDS_RESERVATION 0x0 |
||
3820 | |||
6104 | serge | 3821 | /***********************************************************************************/ |
1430 | serge | 3822 | // Structure used in VRAM_UsageByFirmwareTable |
3823 | // Note1: This table is filled by SetBiosReservationStartInFB in CoreCommSubs.asm |
||
3824 | // at running time. |
||
3825 | // note2: From RV770, the memory is more than 32bit addressable, so we will change |
||
3826 | // ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains |
||
3827 | // exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware |
||
3828 | // (in offset to start of memory address) is KB aligned instead of byte aligend. |
||
6104 | serge | 3829 | /***********************************************************************************/ |
1430 | serge | 3830 | // Note3: |
3831 | /* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged constant across VGA or non VGA adapter, |
||
3832 | for CAIL, The size of FB access area is known, only thing missing is the Offset of FB Access area, so we can have: |
||
3833 | |||
3834 | If (ulStartAddrUsedByFirmware!=0) |
||
3835 | FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB; |
||
3836 | Reserved area has been claimed by VBIOS including this FB access area; CAIL doesn't need to reserve any extra area for this purpose |
||
3837 | else //Non VGA case |
||
3838 | if (FB_Size<=2Gb) |
||
3839 | FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB; |
||
3840 | else |
||
3841 | FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB |
||
3842 | |||
3843 | CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/ |
||
3844 | |||
2997 | Serge | 3845 | /***********************************************************************************/ |
1117 | serge | 3846 | #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 |
3847 | |||
1430 | serge | 3848 | typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO |
3849 | { |
||
6104 | serge | 3850 | ULONG ulStartAddrUsedByFirmware; |
3851 | USHORT usFirmwareUseInKb; |
||
3852 | USHORT usReserved; |
||
1430 | serge | 3853 | }ATOM_FIRMWARE_VRAM_RESERVE_INFO; |
1117 | serge | 3854 | |
1430 | serge | 3855 | typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE |
3856 | { |
||
3857 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
3858 | ATOM_FIRMWARE_VRAM_RESERVE_INFO asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; |
||
3859 | }ATOM_VRAM_USAGE_BY_FIRMWARE; |
||
3860 | |||
3861 | // change verion to 1.5, when allow driver to allocate the vram area for command table access. |
||
3862 | typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 |
||
3863 | { |
||
3864 | ULONG ulStartAddrUsedByFirmware; |
||
3865 | USHORT usFirmwareUseInKb; |
||
3866 | USHORT usFBUsedByDrvInKb; |
||
3867 | }ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5; |
||
3868 | |||
3869 | typedef struct _ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5 |
||
3870 | { |
||
6104 | serge | 3871 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 3872 | ATOM_FIRMWARE_VRAM_RESERVE_INFO_V1_5 asFirmwareVramReserveInfo[ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO]; |
3873 | }ATOM_VRAM_USAGE_BY_FIRMWARE_V1_5; |
||
1117 | serge | 3874 | |
6104 | serge | 3875 | /****************************************************************************/ |
1430 | serge | 3876 | // Structure used in GPIO_Pin_LUTTable |
6104 | serge | 3877 | /****************************************************************************/ |
1430 | serge | 3878 | typedef struct _ATOM_GPIO_PIN_ASSIGNMENT |
3879 | { |
||
6104 | serge | 3880 | USHORT usGpioPin_AIndex; |
3881 | UCHAR ucGpioPinBitShift; |
||
3882 | UCHAR ucGPIO_ID; |
||
1430 | serge | 3883 | }ATOM_GPIO_PIN_ASSIGNMENT; |
1117 | serge | 3884 | |
5078 | serge | 3885 | //ucGPIO_ID pre-define id for multiple usage |
3886 | //from SMU7.x, if ucGPIO_ID=PP_AC_DC_SWITCH_GPIO_PINID in GPIO_LUTTable, AC/DC swithing feature is enable |
||
3887 | #define PP_AC_DC_SWITCH_GPIO_PINID 60 |
||
3888 | //from SMU7.x, if ucGPIO_ID=VDDC_REGULATOR_VRHOT_GPIO_PINID in GPIO_LUTable, VRHot feature is enable |
||
3889 | #define VDDC_VRHOT_GPIO_PINID 61 |
||
3890 | //if ucGPIO_ID=VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled |
||
3891 | #define VDDC_PCC_GPIO_PINID 62 |
||
3892 | |||
1430 | serge | 3893 | typedef struct _ATOM_GPIO_PIN_LUT |
3894 | { |
||
6104 | serge | 3895 | ATOM_COMMON_TABLE_HEADER sHeader; |
3896 | ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1]; |
||
1430 | serge | 3897 | }ATOM_GPIO_PIN_LUT; |
1117 | serge | 3898 | |
6104 | serge | 3899 | /****************************************************************************/ |
1430 | serge | 3900 | // Structure used in ComponentVideoInfoTable |
6104 | serge | 3901 | /****************************************************************************/ |
1117 | serge | 3902 | #define GPIO_PIN_ACTIVE_HIGH 0x1 |
3903 | |||
3904 | #define MAX_SUPPORTED_CV_STANDARDS 5 |
||
3905 | |||
1430 | serge | 3906 | // definitions for ATOM_D_INFO.ucSettings |
3907 | #define ATOM_GPIO_SETTINGS_BITSHIFT_MASK 0x1F // [4:0] |
||
3908 | #define ATOM_GPIO_SETTINGS_RESERVED_MASK 0x60 // [6:5] = must be zeroed out |
||
3909 | #define ATOM_GPIO_SETTINGS_ACTIVE_MASK 0x80 // [7] |
||
1117 | serge | 3910 | |
1430 | serge | 3911 | typedef struct _ATOM_GPIO_INFO |
3912 | { |
||
6104 | serge | 3913 | USHORT usAOffset; |
3914 | UCHAR ucSettings; |
||
3915 | UCHAR ucReserved; |
||
1430 | serge | 3916 | }ATOM_GPIO_INFO; |
1117 | serge | 3917 | |
1430 | serge | 3918 | // definitions for ATOM_COMPONENT_VIDEO_INFO.ucMiscInfo (bit vector) |
1117 | serge | 3919 | #define ATOM_CV_RESTRICT_FORMAT_SELECTION 0x2 |
3920 | |||
1430 | serge | 3921 | // definitions for ATOM_COMPONENT_VIDEO_INFO.uc480i/uc480p/uc720p/uc1080i |
3922 | #define ATOM_GPIO_DEFAULT_MODE_EN 0x80 //[7]; |
||
3923 | #define ATOM_GPIO_SETTING_PERMODE_MASK 0x7F //[6:0] |
||
1117 | serge | 3924 | |
1430 | serge | 3925 | // definitions for ATOM_COMPONENT_VIDEO_INFO.ucLetterBoxMode |
3926 | //Line 3 out put 5V. |
||
3927 | #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_A 0x01 //represent gpio 3 state for 16:9 |
||
3928 | #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_B 0x02 //represent gpio 4 state for 16:9 |
||
6104 | serge | 3929 | #define ATOM_CV_LINE3_ASPECTRATIO_16_9_GPIO_SHIFT 0x0 |
1117 | serge | 3930 | |
1430 | serge | 3931 | //Line 3 out put 2.2V |
3932 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_A 0x04 //represent gpio 3 state for 4:3 Letter box |
||
3933 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_B 0x08 //represent gpio 4 state for 4:3 Letter box |
||
6104 | serge | 3934 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_LETBOX_GPIO_SHIFT 0x2 |
1117 | serge | 3935 | |
1430 | serge | 3936 | //Line 3 out put 0V |
3937 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_A 0x10 //represent gpio 3 state for 4:3 |
||
3938 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_B 0x20 //represent gpio 4 state for 4:3 |
||
6104 | serge | 3939 | #define ATOM_CV_LINE3_ASPECTRATIO_4_3_GPIO_SHIFT 0x4 |
1117 | serge | 3940 | |
1430 | serge | 3941 | #define ATOM_CV_LINE3_ASPECTRATIO_MASK 0x3F // bit [5:0] |
1117 | serge | 3942 | |
1430 | serge | 3943 | #define ATOM_CV_LINE3_ASPECTRATIO_EXIST 0x80 //bit 7 |
1117 | serge | 3944 | |
1430 | serge | 3945 | //GPIO bit index in gpio setting per mode value, also represend the block no. in gpio blocks. |
3946 | #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_A 3 //bit 3 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. |
||
3947 | #define ATOM_GPIO_INDEX_LINE3_ASPECRATIO_GPIO_B 4 //bit 4 in uc480i/uc480p/uc720p/uc1080i, which represend the default gpio bit setting for the mode. |
||
1117 | serge | 3948 | |
1430 | serge | 3949 | |
3950 | typedef struct _ATOM_COMPONENT_VIDEO_INFO |
||
3951 | { |
||
6104 | serge | 3952 | ATOM_COMMON_TABLE_HEADER sHeader; |
3953 | USHORT usMask_PinRegisterIndex; |
||
3954 | USHORT usEN_PinRegisterIndex; |
||
3955 | USHORT usY_PinRegisterIndex; |
||
3956 | USHORT usA_PinRegisterIndex; |
||
3957 | UCHAR ucBitShift; |
||
1430 | serge | 3958 | UCHAR ucPinActiveState; //ucPinActiveState: Bit0=1 active high, =0 active low |
3959 | ATOM_DTD_FORMAT sReserved; // must be zeroed out |
||
6104 | serge | 3960 | UCHAR ucMiscInfo; |
3961 | UCHAR uc480i; |
||
3962 | UCHAR uc480p; |
||
3963 | UCHAR uc720p; |
||
3964 | UCHAR uc1080i; |
||
3965 | UCHAR ucLetterBoxMode; |
||
3966 | UCHAR ucReserved[3]; |
||
1430 | serge | 3967 | UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector |
6104 | serge | 3968 | ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; |
3969 | ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; |
||
1430 | serge | 3970 | }ATOM_COMPONENT_VIDEO_INFO; |
1117 | serge | 3971 | |
1430 | serge | 3972 | //ucTableFormatRevision=2 |
3973 | //ucTableContentRevision=1 |
||
3974 | typedef struct _ATOM_COMPONENT_VIDEO_INFO_V21 |
||
3975 | { |
||
6104 | serge | 3976 | ATOM_COMMON_TABLE_HEADER sHeader; |
3977 | UCHAR ucMiscInfo; |
||
3978 | UCHAR uc480i; |
||
3979 | UCHAR uc480p; |
||
3980 | UCHAR uc720p; |
||
3981 | UCHAR uc1080i; |
||
3982 | UCHAR ucReserved; |
||
3983 | UCHAR ucLetterBoxMode; |
||
1430 | serge | 3984 | UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC type connector |
6104 | serge | 3985 | ATOM_GPIO_INFO aWbGpioStateBlock[MAX_SUPPORTED_CV_STANDARDS]; |
3986 | ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_CV_STANDARDS]; |
||
1430 | serge | 3987 | }ATOM_COMPONENT_VIDEO_INFO_V21; |
1117 | serge | 3988 | |
3989 | #define ATOM_COMPONENT_VIDEO_INFO_LAST ATOM_COMPONENT_VIDEO_INFO_V21 |
||
3990 | |||
6104 | serge | 3991 | /****************************************************************************/ |
1430 | serge | 3992 | // Structure used in object_InfoTable |
6104 | serge | 3993 | /****************************************************************************/ |
1430 | serge | 3994 | typedef struct _ATOM_OBJECT_HEADER |
3995 | { |
||
6104 | serge | 3996 | ATOM_COMMON_TABLE_HEADER sHeader; |
3997 | USHORT usDeviceSupport; |
||
3998 | USHORT usConnectorObjectTableOffset; |
||
3999 | USHORT usRouterObjectTableOffset; |
||
4000 | USHORT usEncoderObjectTableOffset; |
||
1430 | serge | 4001 | USHORT usProtectionObjectTableOffset; //only available when Protection block is independent. |
6104 | serge | 4002 | USHORT usDisplayPathTableOffset; |
1430 | serge | 4003 | }ATOM_OBJECT_HEADER; |
1117 | serge | 4004 | |
1430 | serge | 4005 | typedef struct _ATOM_OBJECT_HEADER_V3 |
4006 | { |
||
4007 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4008 | USHORT usDeviceSupport; |
||
4009 | USHORT usConnectorObjectTableOffset; |
||
4010 | USHORT usRouterObjectTableOffset; |
||
4011 | USHORT usEncoderObjectTableOffset; |
||
4012 | USHORT usProtectionObjectTableOffset; //only available when Protection block is independent. |
||
4013 | USHORT usDisplayPathTableOffset; |
||
4014 | USHORT usMiscObjectTableOffset; |
||
4015 | }ATOM_OBJECT_HEADER_V3; |
||
1117 | serge | 4016 | |
1430 | serge | 4017 | typedef struct _ATOM_DISPLAY_OBJECT_PATH |
4018 | { |
||
4019 | USHORT usDeviceTag; //supported device |
||
4020 | USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH |
||
4021 | USHORT usConnObjectId; //Connector Object ID |
||
4022 | USHORT usGPUObjectId; //GPU ID |
||
4023 | USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. |
||
4024 | }ATOM_DISPLAY_OBJECT_PATH; |
||
4025 | |||
1963 | serge | 4026 | typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH |
4027 | { |
||
4028 | USHORT usDeviceTag; //supported device |
||
4029 | USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH |
||
4030 | USHORT usConnObjectId; //Connector Object ID |
||
4031 | USHORT usGPUObjectId; //GPU ID |
||
4032 | USHORT usGraphicObjIds[2]; //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder |
||
4033 | }ATOM_DISPLAY_EXTERNAL_OBJECT_PATH; |
||
4034 | |||
1430 | serge | 4035 | typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE |
4036 | { |
||
6104 | serge | 4037 | UCHAR ucNumOfDispPath; |
4038 | UCHAR ucVersion; |
||
4039 | UCHAR ucPadding[2]; |
||
4040 | ATOM_DISPLAY_OBJECT_PATH asDispPath[1]; |
||
1430 | serge | 4041 | }ATOM_DISPLAY_OBJECT_PATH_TABLE; |
1117 | serge | 4042 | |
1430 | serge | 4043 | |
4044 | typedef struct _ATOM_OBJECT //each object has this structure |
||
1117 | serge | 4045 | { |
6104 | serge | 4046 | USHORT usObjectID; |
4047 | USHORT usSrcDstTableOffset; |
||
1430 | serge | 4048 | USHORT usRecordOffset; //this pointing to a bunch of records defined below |
6104 | serge | 4049 | USHORT usReserved; |
1430 | serge | 4050 | }ATOM_OBJECT; |
1117 | serge | 4051 | |
1430 | serge | 4052 | typedef struct _ATOM_OBJECT_TABLE //Above 4 object table offset pointing to a bunch of objects all have this structure |
1117 | serge | 4053 | { |
6104 | serge | 4054 | UCHAR ucNumberOfObjects; |
4055 | UCHAR ucPadding[3]; |
||
4056 | ATOM_OBJECT asObjects[1]; |
||
1430 | serge | 4057 | }ATOM_OBJECT_TABLE; |
1117 | serge | 4058 | |
1430 | serge | 4059 | typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure |
1117 | serge | 4060 | { |
6104 | serge | 4061 | UCHAR ucNumberOfSrc; |
4062 | USHORT usSrcObjectID[1]; |
||
4063 | UCHAR ucNumberOfDst; |
||
4064 | USHORT usDstObjectID[1]; |
||
1430 | serge | 4065 | }ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT; |
1117 | serge | 4066 | |
4067 | |||
1430 | serge | 4068 | //Two definitions below are for OPM on MXM module designs |
4069 | |||
4070 | #define EXT_HPDPIN_LUTINDEX_0 0 |
||
4071 | #define EXT_HPDPIN_LUTINDEX_1 1 |
||
4072 | #define EXT_HPDPIN_LUTINDEX_2 2 |
||
4073 | #define EXT_HPDPIN_LUTINDEX_3 3 |
||
4074 | #define EXT_HPDPIN_LUTINDEX_4 4 |
||
4075 | #define EXT_HPDPIN_LUTINDEX_5 5 |
||
4076 | #define EXT_HPDPIN_LUTINDEX_6 6 |
||
4077 | #define EXT_HPDPIN_LUTINDEX_7 7 |
||
4078 | #define MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES (EXT_HPDPIN_LUTINDEX_7+1) |
||
4079 | |||
4080 | #define EXT_AUXDDC_LUTINDEX_0 0 |
||
4081 | #define EXT_AUXDDC_LUTINDEX_1 1 |
||
4082 | #define EXT_AUXDDC_LUTINDEX_2 2 |
||
4083 | #define EXT_AUXDDC_LUTINDEX_3 3 |
||
4084 | #define EXT_AUXDDC_LUTINDEX_4 4 |
||
4085 | #define EXT_AUXDDC_LUTINDEX_5 5 |
||
4086 | #define EXT_AUXDDC_LUTINDEX_6 6 |
||
4087 | #define EXT_AUXDDC_LUTINDEX_7 7 |
||
4088 | #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES (EXT_AUXDDC_LUTINDEX_7+1) |
||
4089 | |||
1963 | serge | 4090 | //ucChannelMapping are defined as following |
4091 | //for DP connector, eDP, DP to VGA/LVDS |
||
4092 | //Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4093 | //Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4094 | //Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4095 | //Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4096 | typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING |
||
4097 | { |
||
4098 | #if ATOM_BIG_ENDIAN |
||
4099 | UCHAR ucDP_Lane3_Source:2; |
||
4100 | UCHAR ucDP_Lane2_Source:2; |
||
4101 | UCHAR ucDP_Lane1_Source:2; |
||
4102 | UCHAR ucDP_Lane0_Source:2; |
||
4103 | #else |
||
4104 | UCHAR ucDP_Lane0_Source:2; |
||
4105 | UCHAR ucDP_Lane1_Source:2; |
||
4106 | UCHAR ucDP_Lane2_Source:2; |
||
4107 | UCHAR ucDP_Lane3_Source:2; |
||
4108 | #endif |
||
4109 | }ATOM_DP_CONN_CHANNEL_MAPPING; |
||
4110 | |||
4111 | //for DVI/HDMI, in dual link case, both links have to have same mapping. |
||
4112 | //Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4113 | //Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4114 | //Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4115 | //Bit[7:6]: Define which pin connect to DVI connector clock lane, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3 |
||
4116 | typedef struct _ATOM_DVI_CONN_CHANNEL_MAPPING |
||
4117 | { |
||
4118 | #if ATOM_BIG_ENDIAN |
||
4119 | UCHAR ucDVI_CLK_Source:2; |
||
4120 | UCHAR ucDVI_DATA0_Source:2; |
||
4121 | UCHAR ucDVI_DATA1_Source:2; |
||
4122 | UCHAR ucDVI_DATA2_Source:2; |
||
4123 | #else |
||
4124 | UCHAR ucDVI_DATA2_Source:2; |
||
4125 | UCHAR ucDVI_DATA1_Source:2; |
||
4126 | UCHAR ucDVI_DATA0_Source:2; |
||
4127 | UCHAR ucDVI_CLK_Source:2; |
||
4128 | #endif |
||
4129 | }ATOM_DVI_CONN_CHANNEL_MAPPING; |
||
4130 | |||
1430 | serge | 4131 | typedef struct _EXT_DISPLAY_PATH |
4132 | { |
||
4133 | USHORT usDeviceTag; //A bit vector to show what devices are supported |
||
4134 | USHORT usDeviceACPIEnum; //16bit device ACPI id. |
||
4135 | USHORT usDeviceConnector; //A physical connector for displays to plug in, using object connector definitions |
||
4136 | UCHAR ucExtAUXDDCLutIndex; //An index into external AUX/DDC channel LUT |
||
4137 | UCHAR ucExtHPDPINLutIndex; //An index into external HPD pin LUT |
||
4138 | USHORT usExtEncoderObjId; //external encoder object id |
||
1963 | serge | 4139 | union{ |
4140 | UCHAR ucChannelMapping; // if ucChannelMapping=0, using default one to one mapping |
||
4141 | ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; |
||
4142 | ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; |
||
4143 | }; |
||
2997 | Serge | 4144 | UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted |
4145 | USHORT usCaps; |
||
4146 | USHORT usReserved; |
||
1430 | serge | 4147 | }EXT_DISPLAY_PATH; |
4148 | |||
4149 | #define NUMBER_OF_UCHAR_FOR_GUID 16 |
||
4150 | #define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7 |
||
4151 | |||
2997 | Serge | 4152 | //usCaps |
4153 | #define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01 |
||
5078 | serge | 4154 | #define EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN 0x02 |
2997 | Serge | 4155 | |
1430 | serge | 4156 | typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO |
4157 | { |
||
4158 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4159 | UCHAR ucGuid [NUMBER_OF_UCHAR_FOR_GUID]; // a GUID is a 16 byte long string |
||
4160 | EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries. |
||
6104 | serge | 4161 | UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. |
1963 | serge | 4162 | UCHAR uc3DStereoPinId; // use for eDP panel |
2997 | Serge | 4163 | UCHAR ucRemoteDisplayConfig; |
4164 | UCHAR uceDPToLVDSRxId; |
||
5078 | serge | 4165 | UCHAR ucFixDPVoltageSwing; // usCaps[1]=1, this indicate DP_LANE_SET value |
4166 | UCHAR Reserved[3]; // for potential expansion |
||
1430 | serge | 4167 | }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; |
4168 | |||
1963 | serge | 4169 | //Related definitions, all records are different but they have a commond header |
1430 | serge | 4170 | typedef struct _ATOM_COMMON_RECORD_HEADER |
4171 | { |
||
4172 | UCHAR ucRecordType; //An emun to indicate the record type |
||
4173 | UCHAR ucRecordSize; //The size of the whole record in byte |
||
4174 | }ATOM_COMMON_RECORD_HEADER; |
||
4175 | |||
4176 | |||
6104 | serge | 4177 | #define ATOM_I2C_RECORD_TYPE 1 |
1117 | serge | 4178 | #define ATOM_HPD_INT_RECORD_TYPE 2 |
4179 | #define ATOM_OUTPUT_PROTECTION_RECORD_TYPE 3 |
||
4180 | #define ATOM_CONNECTOR_DEVICE_TAG_RECORD_TYPE 4 |
||
1430 | serge | 4181 | #define ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD_TYPE 5 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE |
4182 | #define ATOM_ENCODER_FPGA_CONTROL_RECORD_TYPE 6 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE |
||
1117 | serge | 4183 | #define ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD_TYPE 7 |
1430 | serge | 4184 | #define ATOM_JTAG_RECORD_TYPE 8 //Obsolete, switch to use GPIO_CNTL_RECORD_TYPE |
1117 | serge | 4185 | #define ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE 9 |
4186 | #define ATOM_ENCODER_DVO_CF_RECORD_TYPE 10 |
||
4187 | #define ATOM_CONNECTOR_CF_RECORD_TYPE 11 |
||
4188 | #define ATOM_CONNECTOR_HARDCODE_DTD_RECORD_TYPE 12 |
||
4189 | #define ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE 13 |
||
6104 | serge | 4190 | #define ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE 14 |
4191 | #define ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE 15 |
||
1430 | serge | 4192 | #define ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE 16 //This is for the case when connectors are not known to object table |
4193 | #define ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE 17 //This is for the case when connectors are not known to object table |
||
4194 | #define ATOM_OBJECT_LINK_RECORD_TYPE 18 //Once this record is present under one object, it indicats the oobject is linked to another obj described by the record |
||
4195 | #define ATOM_CONNECTOR_REMOTE_CAP_RECORD_TYPE 19 |
||
1963 | serge | 4196 | #define ATOM_ENCODER_CAP_RECORD_TYPE 20 |
5078 | serge | 4197 | #define ATOM_BRACKET_LAYOUT_RECORD_TYPE 21 |
1117 | serge | 4198 | |
1430 | serge | 4199 | //Must be updated when new record type is added,equal to that record definition! |
5078 | serge | 4200 | #define ATOM_MAX_OBJECT_RECORD_NUMBER ATOM_BRACKET_LAYOUT_RECORD_TYPE |
1430 | serge | 4201 | |
4202 | typedef struct _ATOM_I2C_RECORD |
||
4203 | { |
||
6104 | serge | 4204 | ATOM_COMMON_RECORD_HEADER sheader; |
4205 | ATOM_I2C_ID_CONFIG sucI2cId; |
||
1430 | serge | 4206 | UCHAR ucI2CAddr; //The slave address, it's 0 when the record is attached to connector for DDC |
4207 | }ATOM_I2C_RECORD; |
||
1117 | serge | 4208 | |
1430 | serge | 4209 | typedef struct _ATOM_HPD_INT_RECORD |
4210 | { |
||
6104 | serge | 4211 | ATOM_COMMON_RECORD_HEADER sheader; |
1430 | serge | 4212 | UCHAR ucHPDIntGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info |
6104 | serge | 4213 | UCHAR ucPlugged_PinState; |
1430 | serge | 4214 | }ATOM_HPD_INT_RECORD; |
1117 | serge | 4215 | |
1430 | serge | 4216 | |
4217 | typedef struct _ATOM_OUTPUT_PROTECTION_RECORD |
||
4218 | { |
||
6104 | serge | 4219 | ATOM_COMMON_RECORD_HEADER sheader; |
4220 | UCHAR ucProtectionFlag; |
||
4221 | UCHAR ucReserved; |
||
1430 | serge | 4222 | }ATOM_OUTPUT_PROTECTION_RECORD; |
1117 | serge | 4223 | |
1430 | serge | 4224 | typedef struct _ATOM_CONNECTOR_DEVICE_TAG |
4225 | { |
||
4226 | ULONG ulACPIDeviceEnum; //Reserved for now |
||
4227 | USHORT usDeviceID; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT" |
||
6104 | serge | 4228 | USHORT usPadding; |
1430 | serge | 4229 | }ATOM_CONNECTOR_DEVICE_TAG; |
1117 | serge | 4230 | |
1430 | serge | 4231 | typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD |
4232 | { |
||
6104 | serge | 4233 | ATOM_COMMON_RECORD_HEADER sheader; |
4234 | UCHAR ucNumberOfDevice; |
||
4235 | UCHAR ucReserved; |
||
1430 | serge | 4236 | ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation |
4237 | }ATOM_CONNECTOR_DEVICE_TAG_RECORD; |
||
1117 | serge | 4238 | |
1430 | serge | 4239 | |
4240 | typedef struct _ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD |
||
4241 | { |
||
6104 | serge | 4242 | ATOM_COMMON_RECORD_HEADER sheader; |
4243 | UCHAR ucConfigGPIOID; |
||
1430 | serge | 4244 | UCHAR ucConfigGPIOState; //Set to 1 when it's active high to enable external flow in |
6104 | serge | 4245 | UCHAR ucFlowinGPIPID; |
4246 | UCHAR ucExtInGPIPID; |
||
1430 | serge | 4247 | }ATOM_CONNECTOR_DVI_EXT_INPUT_RECORD; |
1117 | serge | 4248 | |
1430 | serge | 4249 | typedef struct _ATOM_ENCODER_FPGA_CONTROL_RECORD |
4250 | { |
||
6104 | serge | 4251 | ATOM_COMMON_RECORD_HEADER sheader; |
4252 | UCHAR ucCTL1GPIO_ID; |
||
1430 | serge | 4253 | UCHAR ucCTL1GPIOState; //Set to 1 when it's active high |
6104 | serge | 4254 | UCHAR ucCTL2GPIO_ID; |
1430 | serge | 4255 | UCHAR ucCTL2GPIOState; //Set to 1 when it's active high |
6104 | serge | 4256 | UCHAR ucCTL3GPIO_ID; |
1430 | serge | 4257 | UCHAR ucCTL3GPIOState; //Set to 1 when it's active high |
6104 | serge | 4258 | UCHAR ucCTLFPGA_IN_ID; |
4259 | UCHAR ucPadding[3]; |
||
1430 | serge | 4260 | }ATOM_ENCODER_FPGA_CONTROL_RECORD; |
1117 | serge | 4261 | |
1430 | serge | 4262 | typedef struct _ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD |
4263 | { |
||
6104 | serge | 4264 | ATOM_COMMON_RECORD_HEADER sheader; |
1430 | serge | 4265 | UCHAR ucGPIOID; //Corresponding block in GPIO_PIN_INFO table gives the pin info |
4266 | UCHAR ucTVActiveState; //Indicating when the pin==0 or 1 when TV is connected |
||
4267 | }ATOM_CONNECTOR_CVTV_SHARE_DIN_RECORD; |
||
1117 | serge | 4268 | |
1430 | serge | 4269 | typedef struct _ATOM_JTAG_RECORD |
4270 | { |
||
6104 | serge | 4271 | ATOM_COMMON_RECORD_HEADER sheader; |
4272 | UCHAR ucTMSGPIO_ID; |
||
1430 | serge | 4273 | UCHAR ucTMSGPIOState; //Set to 1 when it's active high |
6104 | serge | 4274 | UCHAR ucTCKGPIO_ID; |
1430 | serge | 4275 | UCHAR ucTCKGPIOState; //Set to 1 when it's active high |
6104 | serge | 4276 | UCHAR ucTDOGPIO_ID; |
1430 | serge | 4277 | UCHAR ucTDOGPIOState; //Set to 1 when it's active high |
6104 | serge | 4278 | UCHAR ucTDIGPIO_ID; |
1430 | serge | 4279 | UCHAR ucTDIGPIOState; //Set to 1 when it's active high |
6104 | serge | 4280 | UCHAR ucPadding[2]; |
1430 | serge | 4281 | }ATOM_JTAG_RECORD; |
1117 | serge | 4282 | |
4283 | |||
1430 | serge | 4284 | //The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually |
4285 | typedef struct _ATOM_GPIO_PIN_CONTROL_PAIR |
||
4286 | { |
||
4287 | UCHAR ucGPIOID; // GPIO_ID, find the corresponding ID in GPIO_LUT table |
||
4288 | UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin |
||
4289 | }ATOM_GPIO_PIN_CONTROL_PAIR; |
||
4290 | |||
4291 | typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD |
||
4292 | { |
||
6104 | serge | 4293 | ATOM_COMMON_RECORD_HEADER sheader; |
1430 | serge | 4294 | UCHAR ucFlags; // Future expnadibility |
4295 | UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object |
||
4296 | ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins |
||
4297 | }ATOM_OBJECT_GPIO_CNTL_RECORD; |
||
1117 | serge | 4298 | |
1430 | serge | 4299 | //Definitions for GPIO pin state |
1117 | serge | 4300 | #define GPIO_PIN_TYPE_INPUT 0x00 |
4301 | #define GPIO_PIN_TYPE_OUTPUT 0x10 |
||
4302 | #define GPIO_PIN_TYPE_HW_CONTROL 0x20 |
||
4303 | |||
1430 | serge | 4304 | //For GPIO_PIN_TYPE_OUTPUT the following is defined |
1117 | serge | 4305 | #define GPIO_PIN_OUTPUT_STATE_MASK 0x01 |
4306 | #define GPIO_PIN_OUTPUT_STATE_SHIFT 0 |
||
4307 | #define GPIO_PIN_STATE_ACTIVE_LOW 0x0 |
||
4308 | #define GPIO_PIN_STATE_ACTIVE_HIGH 0x1 |
||
4309 | |||
1430 | serge | 4310 | // Indexes to GPIO array in GLSync record |
2997 | Serge | 4311 | // GLSync record is for Frame Lock/Gen Lock feature. |
1430 | serge | 4312 | #define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0 |
4313 | #define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1 |
||
4314 | #define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2 |
||
4315 | #define ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ 3 |
||
4316 | #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4 |
||
4317 | #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5 |
||
4318 | #define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6 |
||
2997 | Serge | 4319 | #define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7 |
4320 | #define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8 |
||
4321 | #define ATOM_GPIO_INDEX_GLSYNC_MAX 9 |
||
1430 | serge | 4322 | |
4323 | typedef struct _ATOM_ENCODER_DVO_CF_RECORD |
||
4324 | { |
||
6104 | serge | 4325 | ATOM_COMMON_RECORD_HEADER sheader; |
1430 | serge | 4326 | ULONG ulStrengthControl; // DVOA strength control for CF |
6104 | serge | 4327 | UCHAR ucPadding[2]; |
1430 | serge | 4328 | }ATOM_ENCODER_DVO_CF_RECORD; |
1117 | serge | 4329 | |
1963 | serge | 4330 | // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap |
2997 | Serge | 4331 | #define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder |
4332 | #define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled |
||
1963 | serge | 4333 | |
4334 | typedef struct _ATOM_ENCODER_CAP_RECORD |
||
4335 | { |
||
4336 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4337 | union { |
||
4338 | USHORT usEncoderCap; |
||
4339 | struct { |
||
4340 | #if ATOM_BIG_ENDIAN |
||
2997 | Serge | 4341 | USHORT usReserved:14; // Bit1-15 may be defined for other capability in future |
4342 | USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable |
||
1963 | serge | 4343 | USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. |
4344 | #else |
||
4345 | USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. |
||
2997 | Serge | 4346 | USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable |
4347 | USHORT usReserved:14; // Bit1-15 may be defined for other capability in future |
||
1963 | serge | 4348 | #endif |
4349 | }; |
||
4350 | }; |
||
4351 | }ATOM_ENCODER_CAP_RECORD; |
||
4352 | |||
1430 | serge | 4353 | // value for ATOM_CONNECTOR_CF_RECORD.ucConnectedDvoBundle |
1117 | serge | 4354 | #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_UPPER12BITBUNDLEA 1 |
4355 | #define ATOM_CONNECTOR_CF_RECORD_CONNECTED_LOWER12BITBUNDLEB 2 |
||
4356 | |||
1430 | serge | 4357 | typedef struct _ATOM_CONNECTOR_CF_RECORD |
4358 | { |
||
6104 | serge | 4359 | ATOM_COMMON_RECORD_HEADER sheader; |
4360 | USHORT usMaxPixClk; |
||
4361 | UCHAR ucFlowCntlGpioId; |
||
4362 | UCHAR ucSwapCntlGpioId; |
||
4363 | UCHAR ucConnectedDvoBundle; |
||
4364 | UCHAR ucPadding; |
||
1430 | serge | 4365 | }ATOM_CONNECTOR_CF_RECORD; |
1117 | serge | 4366 | |
1430 | serge | 4367 | typedef struct _ATOM_CONNECTOR_HARDCODE_DTD_RECORD |
4368 | { |
||
6104 | serge | 4369 | ATOM_COMMON_RECORD_HEADER sheader; |
4370 | ATOM_DTD_FORMAT asTiming; |
||
1430 | serge | 4371 | }ATOM_CONNECTOR_HARDCODE_DTD_RECORD; |
1117 | serge | 4372 | |
1430 | serge | 4373 | typedef struct _ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD |
4374 | { |
||
4375 | ATOM_COMMON_RECORD_HEADER sheader; //ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD_TYPE |
||
4376 | UCHAR ucSubConnectorType; //CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D|X_ID_DUAL_LINK_DVI_D|HDMI_TYPE_A |
||
6104 | serge | 4377 | UCHAR ucReserved; |
1430 | serge | 4378 | }ATOM_CONNECTOR_PCIE_SUBCONNECTOR_RECORD; |
1117 | serge | 4379 | |
1430 | serge | 4380 | |
4381 | typedef struct _ATOM_ROUTER_DDC_PATH_SELECT_RECORD |
||
4382 | { |
||
6104 | serge | 4383 | ATOM_COMMON_RECORD_HEADER sheader; |
1430 | serge | 4384 | UCHAR ucMuxType; //decide the number of ucMuxState, =0, no pin state, =1: single state with complement, >1: multiple state |
6104 | serge | 4385 | UCHAR ucMuxControlPin; |
1430 | serge | 4386 | UCHAR ucMuxState[2]; //for alligment purpose |
4387 | }ATOM_ROUTER_DDC_PATH_SELECT_RECORD; |
||
1117 | serge | 4388 | |
1430 | serge | 4389 | typedef struct _ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD |
4390 | { |
||
6104 | serge | 4391 | ATOM_COMMON_RECORD_HEADER sheader; |
4392 | UCHAR ucMuxType; |
||
4393 | UCHAR ucMuxControlPin; |
||
1430 | serge | 4394 | UCHAR ucMuxState[2]; //for alligment purpose |
4395 | }ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD; |
||
1117 | serge | 4396 | |
1430 | serge | 4397 | // define ucMuxType |
1117 | serge | 4398 | #define ATOM_ROUTER_MUX_PIN_STATE_MASK 0x0f |
4399 | #define ATOM_ROUTER_MUX_PIN_SINGLE_STATE_COMPLEMENT 0x01 |
||
4400 | |||
1430 | serge | 4401 | typedef struct _ATOM_CONNECTOR_HPDPIN_LUT_RECORD //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE |
4402 | { |
||
4403 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4404 | UCHAR ucHPDPINMap[MAX_NUMBER_OF_EXT_HPDPIN_LUT_ENTRIES]; //An fixed size array which maps external pins to internal GPIO_PIN_INFO table |
||
4405 | }ATOM_CONNECTOR_HPDPIN_LUT_RECORD; |
||
4406 | |||
4407 | typedef struct _ATOM_CONNECTOR_AUXDDC_LUT_RECORD //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE |
||
4408 | { |
||
4409 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4410 | ATOM_I2C_ID_CONFIG ucAUXDDCMap[MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES]; //An fixed size array which maps external pins to internal DDC ID |
||
4411 | }ATOM_CONNECTOR_AUXDDC_LUT_RECORD; |
||
4412 | |||
4413 | typedef struct _ATOM_OBJECT_LINK_RECORD |
||
4414 | { |
||
4415 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4416 | USHORT usObjectID; //could be connector, encorder or other object in object.h |
||
4417 | }ATOM_OBJECT_LINK_RECORD; |
||
4418 | |||
4419 | typedef struct _ATOM_CONNECTOR_REMOTE_CAP_RECORD |
||
4420 | { |
||
4421 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4422 | USHORT usReserved; |
||
4423 | }ATOM_CONNECTOR_REMOTE_CAP_RECORD; |
||
4424 | |||
5078 | serge | 4425 | typedef struct _ATOM_CONNECTOR_LAYOUT_INFO |
4426 | { |
||
4427 | USHORT usConnectorObjectId; |
||
4428 | UCHAR ucConnectorType; |
||
4429 | UCHAR ucPosition; |
||
4430 | }ATOM_CONNECTOR_LAYOUT_INFO; |
||
4431 | |||
4432 | // define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size |
||
4433 | #define CONNECTOR_TYPE_DVI_D 1 |
||
4434 | #define CONNECTOR_TYPE_DVI_I 2 |
||
4435 | #define CONNECTOR_TYPE_VGA 3 |
||
4436 | #define CONNECTOR_TYPE_HDMI 4 |
||
4437 | #define CONNECTOR_TYPE_DISPLAY_PORT 5 |
||
4438 | #define CONNECTOR_TYPE_MINI_DISPLAY_PORT 6 |
||
4439 | |||
4440 | typedef struct _ATOM_BRACKET_LAYOUT_RECORD |
||
4441 | { |
||
4442 | ATOM_COMMON_RECORD_HEADER sheader; |
||
4443 | UCHAR ucLength; |
||
4444 | UCHAR ucWidth; |
||
4445 | UCHAR ucConnNum; |
||
4446 | UCHAR ucReserved; |
||
4447 | ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1]; |
||
4448 | }ATOM_BRACKET_LAYOUT_RECORD; |
||
4449 | |||
6104 | serge | 4450 | /****************************************************************************/ |
1430 | serge | 4451 | // ASIC voltage data table |
6104 | serge | 4452 | /****************************************************************************/ |
1430 | serge | 4453 | typedef struct _ATOM_VOLTAGE_INFO_HEADER |
4454 | { |
||
4455 | USHORT usVDDCBaseLevel; //In number of 50mv unit |
||
4456 | USHORT usReserved; //For possible extension table offset |
||
6104 | serge | 4457 | UCHAR ucNumOfVoltageEntries; |
4458 | UCHAR ucBytesPerVoltageEntry; |
||
1430 | serge | 4459 | UCHAR ucVoltageStep; //Indicating in how many mv increament is one step, 0.5mv unit |
6104 | serge | 4460 | UCHAR ucDefaultVoltageEntry; |
4461 | UCHAR ucVoltageControlI2cLine; |
||
4462 | UCHAR ucVoltageControlAddress; |
||
4463 | UCHAR ucVoltageControlOffset; |
||
1430 | serge | 4464 | }ATOM_VOLTAGE_INFO_HEADER; |
1117 | serge | 4465 | |
1430 | serge | 4466 | typedef struct _ATOM_VOLTAGE_INFO |
4467 | { |
||
6104 | serge | 4468 | ATOM_COMMON_TABLE_HEADER sHeader; |
4469 | ATOM_VOLTAGE_INFO_HEADER viHeader; |
||
1430 | serge | 4470 | UCHAR ucVoltageEntries[64]; //64 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries*ucBytesPerVoltageEntry |
4471 | }ATOM_VOLTAGE_INFO; |
||
1117 | serge | 4472 | |
1430 | serge | 4473 | |
4474 | typedef struct _ATOM_VOLTAGE_FORMULA |
||
4475 | { |
||
4476 | USHORT usVoltageBaseLevel; // In number of 1mv unit |
||
4477 | USHORT usVoltageStep; // Indicating in how many mv increament is one step, 1mv unit |
||
4478 | UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage |
||
4479 | UCHAR ucFlag; // bit0=0 :step is 1mv =1 0.5mv |
||
4480 | UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /VoltageStep |
||
6104 | serge | 4481 | UCHAR ucReserved; |
1430 | serge | 4482 | UCHAR ucVIDAdjustEntries[32]; // 32 is for allocation, the actual number of entry is present at ucNumOfVoltageEntries |
4483 | }ATOM_VOLTAGE_FORMULA; |
||
1117 | serge | 4484 | |
1430 | serge | 4485 | typedef struct _VOLTAGE_LUT_ENTRY |
4486 | { |
||
4487 | USHORT usVoltageCode; // The Voltage ID, either GPIO or I2C code |
||
4488 | USHORT usVoltageValue; // The corresponding Voltage Value, in mV |
||
4489 | }VOLTAGE_LUT_ENTRY; |
||
4490 | |||
4491 | typedef struct _ATOM_VOLTAGE_FORMULA_V2 |
||
4492 | { |
||
4493 | UCHAR ucNumOfVoltageEntries; // Number of Voltage Entry, which indicate max Voltage |
||
4494 | UCHAR ucReserved[3]; |
||
4495 | VOLTAGE_LUT_ENTRY asVIDAdjustEntries[32];// 32 is for allocation, the actual number of entries is in ucNumOfVoltageEntries |
||
4496 | }ATOM_VOLTAGE_FORMULA_V2; |
||
4497 | |||
4498 | typedef struct _ATOM_VOLTAGE_CONTROL |
||
4499 | { |
||
4500 | UCHAR ucVoltageControlId; //Indicate it is controlled by I2C or GPIO or HW state machine |
||
6104 | serge | 4501 | UCHAR ucVoltageControlI2cLine; |
4502 | UCHAR ucVoltageControlAddress; |
||
4503 | UCHAR ucVoltageControlOffset; |
||
1430 | serge | 4504 | USHORT usGpioPin_AIndex; //GPIO_PAD register index |
4505 | UCHAR ucGpioPinBitShift[9]; //at most 8 pin support 255 VIDs, termintate with 0xff |
||
6104 | serge | 4506 | UCHAR ucReserved; |
1430 | serge | 4507 | }ATOM_VOLTAGE_CONTROL; |
1117 | serge | 4508 | |
1430 | serge | 4509 | // Define ucVoltageControlId |
1117 | serge | 4510 | #define VOLTAGE_CONTROLLED_BY_HW 0x00 |
4511 | #define VOLTAGE_CONTROLLED_BY_I2C_MASK 0x7F |
||
4512 | #define VOLTAGE_CONTROLLED_BY_GPIO 0x80 |
||
1430 | serge | 4513 | #define VOLTAGE_CONTROL_ID_LM64 0x01 //I2C control, used for R5xx Core Voltage |
4514 | #define VOLTAGE_CONTROL_ID_DAC 0x02 //I2C control, used for R5xx/R6xx MVDDC,MVDDQ or VDDCI |
||
4515 | #define VOLTAGE_CONTROL_ID_VT116xM 0x03 //I2C control, used for R6xx Core Voltage |
||
6104 | serge | 4516 | #define VOLTAGE_CONTROL_ID_DS4402 0x04 |
1963 | serge | 4517 | #define VOLTAGE_CONTROL_ID_UP6266 0x05 |
4518 | #define VOLTAGE_CONTROL_ID_SCORPIO 0x06 |
||
4519 | #define VOLTAGE_CONTROL_ID_VT1556M 0x07 |
||
4520 | #define VOLTAGE_CONTROL_ID_CHL822x 0x08 |
||
4521 | #define VOLTAGE_CONTROL_ID_VT1586M 0x09 |
||
2997 | Serge | 4522 | #define VOLTAGE_CONTROL_ID_UP1637 0x0A |
5078 | serge | 4523 | #define VOLTAGE_CONTROL_ID_CHL8214 0x0B |
4524 | #define VOLTAGE_CONTROL_ID_UP1801 0x0C |
||
4525 | #define VOLTAGE_CONTROL_ID_ST6788A 0x0D |
||
4526 | #define VOLTAGE_CONTROL_ID_CHLIR3564SVI2 0x0E |
||
4527 | #define VOLTAGE_CONTROL_ID_AD527x 0x0F |
||
4528 | #define VOLTAGE_CONTROL_ID_NCP81022 0x10 |
||
4529 | #define VOLTAGE_CONTROL_ID_LTC2635 0x11 |
||
1117 | serge | 4530 | |
1430 | serge | 4531 | typedef struct _ATOM_VOLTAGE_OBJECT |
4532 | { |
||
4533 | UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI |
||
4534 | UCHAR ucSize; //Size of Object |
||
4535 | ATOM_VOLTAGE_CONTROL asControl; //describ how to control |
||
4536 | ATOM_VOLTAGE_FORMULA asFormula; //Indicate How to convert real Voltage to VID |
||
4537 | }ATOM_VOLTAGE_OBJECT; |
||
1117 | serge | 4538 | |
1430 | serge | 4539 | typedef struct _ATOM_VOLTAGE_OBJECT_V2 |
4540 | { |
||
4541 | UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI |
||
4542 | UCHAR ucSize; //Size of Object |
||
4543 | ATOM_VOLTAGE_CONTROL asControl; //describ how to control |
||
4544 | ATOM_VOLTAGE_FORMULA_V2 asFormula; //Indicate How to convert real Voltage to VID |
||
4545 | }ATOM_VOLTAGE_OBJECT_V2; |
||
4546 | |||
4547 | typedef struct _ATOM_VOLTAGE_OBJECT_INFO |
||
4548 | { |
||
4549 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4550 | ATOM_VOLTAGE_OBJECT asVoltageObj[3]; //Info for Voltage control |
||
4551 | }ATOM_VOLTAGE_OBJECT_INFO; |
||
4552 | |||
4553 | typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V2 |
||
4554 | { |
||
6104 | serge | 4555 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 4556 | ATOM_VOLTAGE_OBJECT_V2 asVoltageObj[3]; //Info for Voltage control |
4557 | }ATOM_VOLTAGE_OBJECT_INFO_V2; |
||
1117 | serge | 4558 | |
1430 | serge | 4559 | typedef struct _ATOM_LEAKID_VOLTAGE |
4560 | { |
||
6104 | serge | 4561 | UCHAR ucLeakageId; |
4562 | UCHAR ucReserved; |
||
4563 | USHORT usVoltage; |
||
1430 | serge | 4564 | }ATOM_LEAKID_VOLTAGE; |
1117 | serge | 4565 | |
2997 | Serge | 4566 | typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{ |
4567 | UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI |
||
4568 | UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase |
||
4569 | USHORT usSize; //Size of Object |
||
4570 | }ATOM_VOLTAGE_OBJECT_HEADER_V3; |
||
4571 | |||
5078 | serge | 4572 | // ATOM_VOLTAGE_OBJECT_HEADER_V3.ucVoltageMode |
4573 | #define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 |
||
4574 | #define VOLTAGE_OBJ_VR_I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OBJECT_V3 |
||
4575 | #define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GPIO_VOLTAGE_OBJECT_V3 |
||
4576 | #define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SVID2_VOLTAGE_OBJECT_V3 |
||
4577 | #define VOLTAGE_OBJ_EVV 8 |
||
6104 | serge | 4578 | #define VOLTAGE_OBJ_PWRBOOST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 |
4579 | #define VOLTAGE_OBJ_HIGH_STATE_LEAKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 |
||
5078 | serge | 4580 | #define VOLTAGE_OBJ_HIGH1_STATE_LEAKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 |
4581 | |||
2997 | Serge | 4582 | typedef struct _VOLTAGE_LUT_ENTRY_V2 |
4583 | { |
||
4584 | ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register |
||
4585 | USHORT usVoltageValue; // The corresponding Voltage Value, in mV |
||
4586 | }VOLTAGE_LUT_ENTRY_V2; |
||
4587 | |||
4588 | typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2 |
||
4589 | { |
||
4590 | USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register |
||
4591 | USHORT usVoltageId; |
||
4592 | USHORT usLeakageId; // The corresponding Voltage Value, in mV |
||
4593 | }LEAKAGE_VOLTAGE_LUT_ENTRY_V2; |
||
4594 | |||
4595 | typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 |
||
4596 | { |
||
5078 | serge | 4597 | ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ |
2997 | Serge | 4598 | UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id |
4599 | UCHAR ucVoltageControlI2cLine; |
||
4600 | UCHAR ucVoltageControlAddress; |
||
4601 | UCHAR ucVoltageControlOffset; |
||
4602 | ULONG ulReserved; |
||
4603 | VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff |
||
4604 | }ATOM_I2C_VOLTAGE_OBJECT_V3; |
||
4605 | |||
5078 | serge | 4606 | // ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag |
4607 | #define VOLTAGE_DATA_ONE_BYTE 0 |
||
4608 | #define VOLTAGE_DATA_TWO_BYTE 1 |
||
4609 | |||
2997 | Serge | 4610 | typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 |
4611 | { |
||
5078 | serge | 4612 | ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT |
2997 | Serge | 4613 | UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode |
4614 | UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table |
||
4615 | UCHAR ucPhaseDelay; // phase delay in unit of micro second |
||
4616 | UCHAR ucReserved; |
||
4617 | ULONG ulGpioMaskVal; // GPIO Mask value |
||
4618 | VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1]; |
||
4619 | }ATOM_GPIO_VOLTAGE_OBJECT_V3; |
||
4620 | |||
4621 | typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 |
||
4622 | { |
||
5078 | serge | 4623 | ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = 0x10/0x11/0x12 |
2997 | Serge | 4624 | UCHAR ucLeakageCntlId; // default is 0 |
4625 | UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table |
||
4626 | UCHAR ucReserved[2]; |
||
4627 | ULONG ulMaxVoltageLevel; |
||
4628 | LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1]; |
||
4629 | }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3; |
||
4630 | |||
5078 | serge | 4631 | |
4632 | typedef struct _ATOM_SVID2_VOLTAGE_OBJECT_V3 |
||
4633 | { |
||
4634 | ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; // voltage mode = VOLTAGE_OBJ_SVID2 |
||
4635 | // 14:7 – PSI0_VID |
||
4636 | // 6 – PSI0_EN |
||
4637 | // 5 – PSI1 |
||
4638 | // 4:2 – load line slope trim. |
||
4639 | // 1:0 – offset trim, |
||
4640 | USHORT usLoadLine_PSI; |
||
4641 | // GPU GPIO pin Id to SVID2 regulator VRHot pin. possible value 0~31. 0 means GPIO0, 31 means GPIO31 |
||
4642 | UCHAR ucSVDGpioId; //0~31 indicate GPIO0~31 |
||
4643 | UCHAR ucSVCGpioId; //0~31 indicate GPIO0~31 |
||
4644 | ULONG ulReserved; |
||
4645 | }ATOM_SVID2_VOLTAGE_OBJECT_V3; |
||
4646 | |||
2997 | Serge | 4647 | typedef union _ATOM_VOLTAGE_OBJECT_V3{ |
4648 | ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj; |
||
4649 | ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj; |
||
4650 | ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj; |
||
5078 | serge | 4651 | ATOM_SVID2_VOLTAGE_OBJECT_V3 asSVID2Obj; |
2997 | Serge | 4652 | }ATOM_VOLTAGE_OBJECT_V3; |
4653 | |||
4654 | typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1 |
||
4655 | { |
||
4656 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4657 | ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control |
||
4658 | }ATOM_VOLTAGE_OBJECT_INFO_V3_1; |
||
4659 | |||
1430 | serge | 4660 | typedef struct _ATOM_ASIC_PROFILE_VOLTAGE |
4661 | { |
||
6104 | serge | 4662 | UCHAR ucProfileId; |
4663 | UCHAR ucReserved; |
||
4664 | USHORT usSize; |
||
4665 | USHORT usEfuseSpareStartAddr; |
||
1430 | serge | 4666 | USHORT usFuseIndex[8]; //from LSB to MSB, Max 8bit,end of 0xffff if less than 8 efuse id, |
4667 | ATOM_LEAKID_VOLTAGE asLeakVol[2]; //Leakid and relatd voltage |
||
4668 | }ATOM_ASIC_PROFILE_VOLTAGE; |
||
1117 | serge | 4669 | |
1430 | serge | 4670 | //ucProfileId |
6104 | serge | 4671 | #define ATOM_ASIC_PROFILE_ID_EFUSE_VOLTAGE 1 |
1117 | serge | 4672 | #define ATOM_ASIC_PROFILE_ID_EFUSE_PERFORMANCE_VOLTAGE 1 |
4673 | #define ATOM_ASIC_PROFILE_ID_EFUSE_THERMAL_VOLTAGE 2 |
||
4674 | |||
1430 | serge | 4675 | typedef struct _ATOM_ASIC_PROFILING_INFO |
4676 | { |
||
6104 | serge | 4677 | ATOM_COMMON_TABLE_HEADER asHeader; |
4678 | ATOM_ASIC_PROFILE_VOLTAGE asVoltage; |
||
1430 | serge | 4679 | }ATOM_ASIC_PROFILING_INFO; |
1117 | serge | 4680 | |
5078 | serge | 4681 | typedef struct _ATOM_ASIC_PROFILING_INFO_V2_1 |
4682 | { |
||
4683 | ATOM_COMMON_TABLE_HEADER asHeader; |
||
4684 | UCHAR ucLeakageBinNum; // indicate the entry number of LeakageId/Voltage Lut table |
||
4685 | USHORT usLeakageBinArrayOffset; // offset of USHORT Leakage Bin list array ( from lower LeakageId to higher) |
||
4686 | |||
4687 | UCHAR ucElbVDDC_Num; |
||
4688 | USHORT usElbVDDC_IdArrayOffset; // offset of USHORT virtual VDDC voltage id ( 0xff01~0xff08 ) |
||
4689 | USHORT usElbVDDC_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array |
||
4690 | |||
4691 | UCHAR ucElbVDDCI_Num; |
||
4692 | USHORT usElbVDDCI_IdArrayOffset; // offset of USHORT virtual VDDCI voltage id ( 0xff01~0xff08 ) |
||
4693 | USHORT usElbVDDCI_LevelArrayOffset; // offset of 2 dimension voltage level USHORT array |
||
4694 | }ATOM_ASIC_PROFILING_INFO_V2_1; |
||
4695 | |||
4696 | typedef struct _ATOM_ASIC_PROFILING_INFO_V3_1 |
||
4697 | { |
||
4698 | ATOM_COMMON_TABLE_HEADER asHeader; |
||
4699 | ULONG ulEvvDerateTdp; |
||
4700 | ULONG ulEvvDerateTdc; |
||
4701 | ULONG ulBoardCoreTemp; |
||
4702 | ULONG ulMaxVddc; |
||
4703 | ULONG ulMinVddc; |
||
4704 | ULONG ulLoadLineSlop; |
||
4705 | ULONG ulLeakageTemp; |
||
4706 | ULONG ulLeakageVoltage; |
||
4707 | ULONG ulCACmEncodeRange; |
||
4708 | ULONG ulCACmEncodeAverage; |
||
4709 | ULONG ulCACbEncodeRange; |
||
4710 | ULONG ulCACbEncodeAverage; |
||
4711 | ULONG ulKt_bEncodeRange; |
||
4712 | ULONG ulKt_bEncodeAverage; |
||
4713 | ULONG ulKv_mEncodeRange; |
||
4714 | ULONG ulKv_mEncodeAverage; |
||
4715 | ULONG ulKv_bEncodeRange; |
||
4716 | ULONG ulKv_bEncodeAverage; |
||
4717 | ULONG ulLkgEncodeLn_MaxDivMin; |
||
4718 | ULONG ulLkgEncodeMin; |
||
4719 | ULONG ulEfuseLogisticAlpha; |
||
4720 | USHORT usPowerDpm0; |
||
4721 | USHORT usCurrentDpm0; |
||
4722 | USHORT usPowerDpm1; |
||
4723 | USHORT usCurrentDpm1; |
||
4724 | USHORT usPowerDpm2; |
||
4725 | USHORT usCurrentDpm2; |
||
4726 | USHORT usPowerDpm3; |
||
4727 | USHORT usCurrentDpm3; |
||
4728 | USHORT usPowerDpm4; |
||
4729 | USHORT usCurrentDpm4; |
||
4730 | USHORT usPowerDpm5; |
||
4731 | USHORT usCurrentDpm5; |
||
4732 | USHORT usPowerDpm6; |
||
4733 | USHORT usCurrentDpm6; |
||
4734 | USHORT usPowerDpm7; |
||
4735 | USHORT usCurrentDpm7; |
||
4736 | }ATOM_ASIC_PROFILING_INFO_V3_1; |
||
4737 | |||
4738 | |||
1430 | serge | 4739 | typedef struct _ATOM_POWER_SOURCE_OBJECT |
4740 | { |
||
4741 | UCHAR ucPwrSrcId; // Power source |
||
4742 | UCHAR ucPwrSensorType; // GPIO, I2C or none |
||
4743 | UCHAR ucPwrSensId; // if GPIO detect, it is GPIO id, if I2C detect, it is I2C id |
||
4744 | UCHAR ucPwrSensSlaveAddr; // Slave address if I2C detect |
||
4745 | UCHAR ucPwrSensRegIndex; // I2C register Index if I2C detect |
||
4746 | UCHAR ucPwrSensRegBitMask; // detect which bit is used if I2C detect |
||
4747 | UCHAR ucPwrSensActiveState; // high active or low active |
||
4748 | UCHAR ucReserve[3]; // reserve |
||
4749 | USHORT usSensPwr; // in unit of watt |
||
4750 | }ATOM_POWER_SOURCE_OBJECT; |
||
1117 | serge | 4751 | |
1430 | serge | 4752 | typedef struct _ATOM_POWER_SOURCE_INFO |
4753 | { |
||
6104 | serge | 4754 | ATOM_COMMON_TABLE_HEADER asHeader; |
4755 | UCHAR asPwrbehave[16]; |
||
4756 | ATOM_POWER_SOURCE_OBJECT asPwrObj[1]; |
||
1430 | serge | 4757 | }ATOM_POWER_SOURCE_INFO; |
1117 | serge | 4758 | |
1430 | serge | 4759 | |
4760 | //Define ucPwrSrcId |
||
1117 | serge | 4761 | #define POWERSOURCE_PCIE_ID1 0x00 |
4762 | #define POWERSOURCE_6PIN_CONNECTOR_ID1 0x01 |
||
4763 | #define POWERSOURCE_8PIN_CONNECTOR_ID1 0x02 |
||
4764 | #define POWERSOURCE_6PIN_CONNECTOR_ID2 0x04 |
||
4765 | #define POWERSOURCE_8PIN_CONNECTOR_ID2 0x08 |
||
4766 | |||
1430 | serge | 4767 | //define ucPwrSensorId |
1117 | serge | 4768 | #define POWER_SENSOR_ALWAYS 0x00 |
4769 | #define POWER_SENSOR_GPIO 0x01 |
||
4770 | #define POWER_SENSOR_I2C 0x02 |
||
4771 | |||
1963 | serge | 4772 | typedef struct _ATOM_CLK_VOLT_CAPABILITY |
4773 | { |
||
4774 | ULONG ulVoltageIndex; // The Voltage Index indicated by FUSE, same voltage index shared with SCLK DPM fuse table |
||
4775 | ULONG ulMaximumSupportedCLK; // Maximum clock supported with specified voltage index, unit in 10kHz |
||
4776 | }ATOM_CLK_VOLT_CAPABILITY; |
||
4777 | |||
4778 | typedef struct _ATOM_AVAILABLE_SCLK_LIST |
||
4779 | { |
||
4780 | ULONG ulSupportedSCLK; // Maximum clock supported with specified voltage index, unit in 10kHz |
||
4781 | USHORT usVoltageIndex; // The Voltage Index indicated by FUSE for specified SCLK |
||
4782 | USHORT usVoltageID; // The Voltage ID indicated by FUSE for specified SCLK |
||
4783 | }ATOM_AVAILABLE_SCLK_LIST; |
||
4784 | |||
4785 | // ATOM_INTEGRATED_SYSTEM_INFO_V6 ulSystemConfig cap definition |
||
4786 | #define ATOM_IGP_INFO_V6_SYSTEM_CONFIG__PCIE_POWER_GATING_ENABLE 1 // refer to ulSystemConfig bit[0] |
||
4787 | |||
4788 | // this IntegrateSystemInfoTable is used for Liano/Ontario APU |
||
1430 | serge | 4789 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 |
4790 | { |
||
4791 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4792 | ULONG ulBootUpEngineClock; |
||
4793 | ULONG ulDentistVCOFreq; |
||
4794 | ULONG ulBootUpUMAClock; |
||
1963 | serge | 4795 | ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; |
1430 | serge | 4796 | ULONG ulBootUpReqDisplayVector; |
4797 | ULONG ulOtherDisplayMisc; |
||
4798 | ULONG ulGPUCapInfo; |
||
1963 | serge | 4799 | ULONG ulSB_MMIO_Base_Addr; |
4800 | USHORT usRequestedPWMFreqInHz; |
||
4801 | UCHAR ucHtcTmpLmt; |
||
4802 | UCHAR ucHtcHystLmt; |
||
4803 | ULONG ulMinEngineClock; |
||
1430 | serge | 4804 | ULONG ulSystemConfig; |
4805 | ULONG ulCPUCapInfo; |
||
1963 | serge | 4806 | USHORT usNBP0Voltage; |
4807 | USHORT usNBP1Voltage; |
||
6104 | serge | 4808 | USHORT usBootUpNBVoltage; |
4809 | USHORT usExtDispConnInfoOffset; |
||
1963 | serge | 4810 | USHORT usPanelRefreshRateRange; |
1430 | serge | 4811 | UCHAR ucMemoryType; |
4812 | UCHAR ucUMAChannelNumber; |
||
4813 | ULONG ulCSR_M3_ARB_CNTL_DEFAULT[10]; |
||
4814 | ULONG ulCSR_M3_ARB_CNTL_UVD[10]; |
||
4815 | ULONG ulCSR_M3_ARB_CNTL_FS3D[10]; |
||
1963 | serge | 4816 | ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; |
4817 | ULONG ulGMCRestoreResetTime; |
||
4818 | ULONG ulMinimumNClk; |
||
4819 | ULONG ulIdleNClk; |
||
4820 | ULONG ulDDR_DLL_PowerUpTime; |
||
4821 | ULONG ulDDR_PLL_PowerUpTime; |
||
4822 | USHORT usPCIEClkSSPercentage; |
||
4823 | USHORT usPCIEClkSSType; |
||
4824 | USHORT usLvdsSSPercentage; |
||
4825 | USHORT usLvdsSSpreadRateIn10Hz; |
||
4826 | USHORT usHDMISSPercentage; |
||
4827 | USHORT usHDMISSpreadRateIn10Hz; |
||
4828 | USHORT usDVISSPercentage; |
||
4829 | USHORT usDVISSpreadRateIn10Hz; |
||
2997 | Serge | 4830 | ULONG SclkDpmBoostMargin; |
4831 | ULONG SclkDpmThrottleMargin; |
||
4832 | USHORT SclkDpmTdpLimitPG; |
||
4833 | USHORT SclkDpmTdpLimitBoost; |
||
4834 | ULONG ulBoostEngineCLock; |
||
4835 | UCHAR ulBoostVid_2bit; |
||
4836 | UCHAR EnableBoost; |
||
4837 | USHORT GnbTdpLimit; |
||
4838 | USHORT usMaxLVDSPclkFreqInSingleLink; |
||
4839 | UCHAR ucLvdsMisc; |
||
4840 | UCHAR ucLVDSReserved; |
||
4841 | ULONG ulReserved3[15]; |
||
1430 | serge | 4842 | ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; |
4843 | }ATOM_INTEGRATED_SYSTEM_INFO_V6; |
||
4844 | |||
1963 | serge | 4845 | // ulGPUCapInfo |
4846 | #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 |
||
4847 | #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08 |
||
4848 | |||
2997 | Serge | 4849 | //ucLVDSMisc: |
4850 | #define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01 |
||
4851 | #define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02 |
||
4852 | #define SYS_INFO_LVDSMISC__888_BPC 0x04 |
||
4853 | #define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08 |
||
4854 | #define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10 |
||
5078 | serge | 4855 | // new since Trinity |
4856 | #define SYS_INFO_LVDSMISC__TRAVIS_LVDS_VOL_OVERRIDE_EN 0x20 |
||
1963 | serge | 4857 | |
2997 | Serge | 4858 | // not used any more |
4859 | #define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04 |
||
4860 | #define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08 |
||
1963 | serge | 4861 | |
1430 | serge | 4862 | /********************************************************************************************************************** |
1963 | serge | 4863 | ATOM_INTEGRATED_SYSTEM_INFO_V6 Description |
4864 | ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock |
||
4865 | ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. |
||
4866 | ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. |
||
4867 | sDISPCLK_Voltage: Report Display clock voltage requirement. |
||
4868 | |||
4869 | ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Liano/Ontaio projects: |
||
4870 | ATOM_DEVICE_CRT1_SUPPORT 0x0001 |
||
4871 | ATOM_DEVICE_CRT2_SUPPORT 0x0010 |
||
4872 | ATOM_DEVICE_DFP1_SUPPORT 0x0008 |
||
4873 | ATOM_DEVICE_DFP6_SUPPORT 0x0040 |
||
4874 | ATOM_DEVICE_DFP2_SUPPORT 0x0080 |
||
4875 | ATOM_DEVICE_DFP3_SUPPORT 0x0200 |
||
4876 | ATOM_DEVICE_DFP4_SUPPORT 0x0400 |
||
4877 | ATOM_DEVICE_DFP5_SUPPORT 0x0800 |
||
4878 | ATOM_DEVICE_LCD1_SUPPORT 0x0002 |
||
4879 | ulOtherDisplayMisc: Other display related flags, not defined yet. |
||
4880 | ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. |
||
4881 | =1: TMDS/HDMI Coherent Mode use signel PLL mode. |
||
4882 | bit[3]=0: Enable HW AUX mode detection logic |
||
4883 | =1: Disable HW AUX mode dettion logic |
||
4884 | ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. |
||
4885 | |||
4886 | usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). |
||
4887 | Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; |
||
4888 | |||
4889 | When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: |
||
4890 | 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; |
||
4891 | VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, |
||
4892 | Changing BL using VBIOS function is functional in both driver and non-driver present environment; |
||
4893 | and enabling VariBri under the driver environment from PP table is optional. |
||
4894 | |||
4895 | 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating |
||
4896 | that BL control from GPU is expected. |
||
4897 | VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 |
||
4898 | Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but |
||
4899 | it's per platform |
||
4900 | and enabling VariBri under the driver environment from PP table is optional. |
||
4901 | |||
4902 | ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. |
||
4903 | Threshold on value to enter HTC_active state. |
||
4904 | ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. |
||
4905 | To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. |
||
4906 | ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. |
||
4907 | ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled |
||
4908 | =1: PCIE Power Gating Enabled |
||
4909 | Bit[1]=0: DDR-DLL shut-down feature disabled. |
||
4910 | 1: DDR-DLL shut-down feature enabled. |
||
4911 | Bit[2]=0: DDR-PLL Power down feature disabled. |
||
4912 | 1: DDR-PLL Power down feature enabled. |
||
4913 | ulCPUCapInfo: TBD |
||
4914 | usNBP0Voltage: VID for voltage on NB P0 State |
||
4915 | usNBP1Voltage: VID for voltage on NB P1 State |
||
4916 | usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. |
||
4917 | usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure |
||
4918 | usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set |
||
4919 | to indicate a range. |
||
4920 | SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 |
||
4921 | SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 |
||
4922 | SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 |
||
4923 | SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 |
||
4924 | ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. |
||
4925 | ucUMAChannelNumber: System memory channel numbers. |
||
4926 | ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default |
||
4927 | ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. |
||
4928 | ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. |
||
2997 | Serge | 4929 | sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high |
1963 | serge | 4930 | ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. |
4931 | ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. |
||
4932 | ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. |
||
4933 | ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. |
||
4934 | ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. |
||
2997 | Serge | 4935 | usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. |
4936 | usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. |
||
4937 | usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. |
||
4938 | usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
4939 | usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
4940 | usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
4941 | usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
4942 | usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
4943 | usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz |
||
4944 | ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode |
||
4945 | [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped |
||
4946 | [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color |
||
4947 | [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used |
||
4948 | [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) |
||
4949 | **********************************************************************************************************************/ |
||
4950 | |||
4951 | // this Table is used for Liano/Ontario APU |
||
4952 | typedef struct _ATOM_FUSION_SYSTEM_INFO_V1 |
||
4953 | { |
||
4954 | ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo; |
||
4955 | ULONG ulPowerplayTable[128]; |
||
4956 | }ATOM_FUSION_SYSTEM_INFO_V1; |
||
5078 | serge | 4957 | |
4958 | |||
4959 | typedef struct _ATOM_TDP_CONFIG_BITS |
||
4960 | { |
||
4961 | #if ATOM_BIG_ENDIAN |
||
4962 | ULONG uReserved:2; |
||
4963 | ULONG uTDP_Value:14; // Original TDP value in tens of milli watts |
||
4964 | ULONG uCTDP_Value:14; // Override value in tens of milli watts |
||
4965 | ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) |
||
4966 | #else |
||
4967 | ULONG uCTDP_Enable:2; // = (uCTDP_Value > uTDP_Value? 2: (uCTDP_Value < uTDP_Value)) |
||
4968 | ULONG uCTDP_Value:14; // Override value in tens of milli watts |
||
4969 | ULONG uTDP_Value:14; // Original TDP value in tens of milli watts |
||
4970 | ULONG uReserved:2; |
||
4971 | #endif |
||
4972 | }ATOM_TDP_CONFIG_BITS; |
||
4973 | |||
4974 | typedef union _ATOM_TDP_CONFIG |
||
4975 | { |
||
4976 | ATOM_TDP_CONFIG_BITS TDP_config; |
||
4977 | ULONG TDP_config_all; |
||
4978 | }ATOM_TDP_CONFIG; |
||
4979 | |||
2997 | Serge | 4980 | /********************************************************************************************************************** |
4981 | ATOM_FUSION_SYSTEM_INFO_V1 Description |
||
4982 | sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition. |
||
4983 | ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0] |
||
4984 | **********************************************************************************************************************/ |
||
4985 | |||
4986 | // this IntegrateSystemInfoTable is used for Trinity APU |
||
4987 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 |
||
4988 | { |
||
4989 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
4990 | ULONG ulBootUpEngineClock; |
||
4991 | ULONG ulDentistVCOFreq; |
||
4992 | ULONG ulBootUpUMAClock; |
||
4993 | ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; |
||
4994 | ULONG ulBootUpReqDisplayVector; |
||
4995 | ULONG ulOtherDisplayMisc; |
||
4996 | ULONG ulGPUCapInfo; |
||
4997 | ULONG ulSB_MMIO_Base_Addr; |
||
4998 | USHORT usRequestedPWMFreqInHz; |
||
4999 | UCHAR ucHtcTmpLmt; |
||
5000 | UCHAR ucHtcHystLmt; |
||
5001 | ULONG ulMinEngineClock; |
||
5002 | ULONG ulSystemConfig; |
||
5003 | ULONG ulCPUCapInfo; |
||
5004 | USHORT usNBP0Voltage; |
||
5005 | USHORT usNBP1Voltage; |
||
5006 | USHORT usBootUpNBVoltage; |
||
5007 | USHORT usExtDispConnInfoOffset; |
||
5008 | USHORT usPanelRefreshRateRange; |
||
5009 | UCHAR ucMemoryType; |
||
5010 | UCHAR ucUMAChannelNumber; |
||
5011 | UCHAR strVBIOSMsg[40]; |
||
5078 | serge | 5012 | ATOM_TDP_CONFIG asTdpConfig; |
5013 | ULONG ulReserved[19]; |
||
2997 | Serge | 5014 | ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; |
5015 | ULONG ulGMCRestoreResetTime; |
||
5016 | ULONG ulMinimumNClk; |
||
5017 | ULONG ulIdleNClk; |
||
5018 | ULONG ulDDR_DLL_PowerUpTime; |
||
5019 | ULONG ulDDR_PLL_PowerUpTime; |
||
5020 | USHORT usPCIEClkSSPercentage; |
||
5021 | USHORT usPCIEClkSSType; |
||
5022 | USHORT usLvdsSSPercentage; |
||
5023 | USHORT usLvdsSSpreadRateIn10Hz; |
||
5024 | USHORT usHDMISSPercentage; |
||
5025 | USHORT usHDMISSpreadRateIn10Hz; |
||
5026 | USHORT usDVISSPercentage; |
||
5027 | USHORT usDVISSpreadRateIn10Hz; |
||
5028 | ULONG SclkDpmBoostMargin; |
||
5029 | ULONG SclkDpmThrottleMargin; |
||
5030 | USHORT SclkDpmTdpLimitPG; |
||
5031 | USHORT SclkDpmTdpLimitBoost; |
||
5032 | ULONG ulBoostEngineCLock; |
||
5033 | UCHAR ulBoostVid_2bit; |
||
5034 | UCHAR EnableBoost; |
||
5035 | USHORT GnbTdpLimit; |
||
5036 | USHORT usMaxLVDSPclkFreqInSingleLink; |
||
5037 | UCHAR ucLvdsMisc; |
||
5078 | serge | 5038 | UCHAR ucTravisLVDSVolAdjust; |
2997 | Serge | 5039 | UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; |
5040 | UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; |
||
5041 | UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; |
||
5042 | UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; |
||
5043 | UCHAR ucLVDSOffToOnDelay_in4Ms; |
||
5044 | UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; |
||
5045 | UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; |
||
5078 | serge | 5046 | UCHAR ucMinAllowedBL_Level; |
2997 | Serge | 5047 | ULONG ulLCDBitDepthControlVal; |
5048 | ULONG ulNbpStateMemclkFreq[4]; |
||
5049 | USHORT usNBP2Voltage; |
||
5050 | USHORT usNBP3Voltage; |
||
5051 | ULONG ulNbpStateNClkFreq[4]; |
||
5052 | UCHAR ucNBDPMEnable; |
||
5053 | UCHAR ucReserved[3]; |
||
5054 | UCHAR ucDPMState0VclkFid; |
||
5055 | UCHAR ucDPMState0DclkFid; |
||
5056 | UCHAR ucDPMState1VclkFid; |
||
5057 | UCHAR ucDPMState1DclkFid; |
||
5058 | UCHAR ucDPMState2VclkFid; |
||
5059 | UCHAR ucDPMState2DclkFid; |
||
5060 | UCHAR ucDPMState3VclkFid; |
||
5061 | UCHAR ucDPMState3DclkFid; |
||
5062 | ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; |
||
5063 | }ATOM_INTEGRATED_SYSTEM_INFO_V1_7; |
||
5064 | |||
5065 | // ulOtherDisplayMisc |
||
5066 | #define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 |
||
5067 | #define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02 |
||
5068 | #define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04 |
||
5069 | #define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08 |
||
5070 | |||
5071 | // ulGPUCapInfo |
||
5072 | #define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 |
||
5073 | #define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02 |
||
5074 | #define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08 |
||
5078 | serge | 5075 | #define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10 |
2997 | Serge | 5076 | |
5077 | /********************************************************************************************************************** |
||
5078 | ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description |
||
5079 | ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock |
||
5080 | ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. |
||
5081 | ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. |
||
5082 | sDISPCLK_Voltage: Report Display clock voltage requirement. |
||
5083 | |||
5084 | ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: |
||
5085 | ATOM_DEVICE_CRT1_SUPPORT 0x0001 |
||
5086 | ATOM_DEVICE_DFP1_SUPPORT 0x0008 |
||
5087 | ATOM_DEVICE_DFP6_SUPPORT 0x0040 |
||
5088 | ATOM_DEVICE_DFP2_SUPPORT 0x0080 |
||
5089 | ATOM_DEVICE_DFP3_SUPPORT 0x0200 |
||
5090 | ATOM_DEVICE_DFP4_SUPPORT 0x0400 |
||
5091 | ATOM_DEVICE_DFP5_SUPPORT 0x0800 |
||
5092 | ATOM_DEVICE_LCD1_SUPPORT 0x0002 |
||
5093 | ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. |
||
5094 | =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. |
||
5095 | bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS |
||
5096 | =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS |
||
5097 | bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS |
||
5098 | =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS |
||
5099 | bit[3]=0: VBIOS fast boot is disable |
||
5100 | =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) |
||
5101 | ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. |
||
5102 | =1: TMDS/HDMI Coherent Mode use signel PLL mode. |
||
5103 | bit[1]=0: DP mode use cascade PLL mode ( New for Trinity ) |
||
5104 | =1: DP mode use single PLL mode |
||
5105 | bit[3]=0: Enable AUX HW mode detection logic |
||
5106 | =1: Disable AUX HW mode detection logic |
||
5107 | |||
5108 | ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. |
||
5109 | |||
5110 | usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). |
||
5111 | Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; |
||
5112 | |||
5113 | When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: |
||
5114 | 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; |
||
5115 | VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, |
||
5116 | Changing BL using VBIOS function is functional in both driver and non-driver present environment; |
||
5117 | and enabling VariBri under the driver environment from PP table is optional. |
||
5118 | |||
5119 | 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating |
||
5120 | that BL control from GPU is expected. |
||
5121 | VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 |
||
5122 | Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but |
||
5123 | it's per platform |
||
5124 | and enabling VariBri under the driver environment from PP table is optional. |
||
5125 | |||
5126 | ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. |
||
5127 | Threshold on value to enter HTC_active state. |
||
5128 | ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. |
||
5129 | To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. |
||
5130 | ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. |
||
5131 | ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled |
||
5132 | =1: PCIE Power Gating Enabled |
||
5133 | Bit[1]=0: DDR-DLL shut-down feature disabled. |
||
5134 | 1: DDR-DLL shut-down feature enabled. |
||
5135 | Bit[2]=0: DDR-PLL Power down feature disabled. |
||
5136 | 1: DDR-PLL Power down feature enabled. |
||
5137 | ulCPUCapInfo: TBD |
||
5138 | usNBP0Voltage: VID for voltage on NB P0 State |
||
5139 | usNBP1Voltage: VID for voltage on NB P1 State |
||
5140 | usNBP2Voltage: VID for voltage on NB P2 State |
||
5141 | usNBP3Voltage: VID for voltage on NB P3 State |
||
5142 | usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. |
||
5143 | usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure |
||
5144 | usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set |
||
5145 | to indicate a range. |
||
5146 | SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 |
||
5147 | SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 |
||
5148 | SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 |
||
5149 | SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 |
||
5150 | ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. |
||
5151 | ucUMAChannelNumber: System memory channel numbers. |
||
5152 | ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default |
||
5153 | ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. |
||
5154 | ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. |
||
5155 | sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high |
||
5156 | ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. |
||
5157 | ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. |
||
5158 | ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. |
||
5159 | ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. |
||
5160 | ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. |
||
1963 | serge | 5161 | usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. |
5162 | usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. |
||
5163 | usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. |
||
5164 | usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
5165 | usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
5166 | usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
5167 | usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
5168 | usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
2997 | Serge | 5169 | usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz |
5170 | ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode |
||
5171 | [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped |
||
5172 | [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color |
||
5173 | [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used |
||
5174 | [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) |
||
5078 | serge | 5175 | [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 |
5176 | ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust |
||
5177 | value to program Travis register LVDS_CTRL_4 |
||
2997 | Serge | 5178 | ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). |
5179 | =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. |
||
5180 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5181 | ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). |
||
5182 | =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. |
||
5183 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5184 | |||
5185 | ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. |
||
5186 | =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON |
||
5187 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5188 | |||
5189 | ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. |
||
5190 | =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON |
||
5191 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5192 | |||
5193 | ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. |
||
5194 | =0 means to use VBIOS default delay which is 125 ( 500ms ). |
||
5195 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5196 | |||
5078 | serge | 5197 | ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: |
5198 | LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. |
||
2997 | Serge | 5199 | =0 means to use VBIOS default delay which is 0 ( 0ms ). |
5200 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5201 | |||
5078 | serge | 5202 | ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: |
5203 | LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. |
||
2997 | Serge | 5204 | =0 means to use VBIOS default delay which is 0 ( 0ms ). |
5205 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5206 | |||
5078 | serge | 5207 | ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. |
5208 | |||
2997 | Serge | 5209 | ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate. |
5210 | |||
1430 | serge | 5211 | **********************************************************************************************************************/ |
5212 | |||
5078 | serge | 5213 | // this IntegrateSystemInfoTable is used for Kaveri & Kabini APU |
5214 | typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_8 |
||
5215 | { |
||
5216 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
5217 | ULONG ulBootUpEngineClock; |
||
5218 | ULONG ulDentistVCOFreq; |
||
5219 | ULONG ulBootUpUMAClock; |
||
5220 | ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; |
||
5221 | ULONG ulBootUpReqDisplayVector; |
||
5222 | ULONG ulVBIOSMisc; |
||
5223 | ULONG ulGPUCapInfo; |
||
5224 | ULONG ulDISP_CLK2Freq; |
||
5225 | USHORT usRequestedPWMFreqInHz; |
||
5226 | UCHAR ucHtcTmpLmt; |
||
5227 | UCHAR ucHtcHystLmt; |
||
5228 | ULONG ulReserved2; |
||
5229 | ULONG ulSystemConfig; |
||
5230 | ULONG ulCPUCapInfo; |
||
5231 | ULONG ulReserved3; |
||
5232 | USHORT usGPUReservedSysMemSize; |
||
5233 | USHORT usExtDispConnInfoOffset; |
||
5234 | USHORT usPanelRefreshRateRange; |
||
5235 | UCHAR ucMemoryType; |
||
5236 | UCHAR ucUMAChannelNumber; |
||
5237 | UCHAR strVBIOSMsg[40]; |
||
5238 | ATOM_TDP_CONFIG asTdpConfig; |
||
5239 | ULONG ulReserved[19]; |
||
5240 | ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; |
||
5241 | ULONG ulGMCRestoreResetTime; |
||
5242 | ULONG ulReserved4; |
||
5243 | ULONG ulIdleNClk; |
||
5244 | ULONG ulDDR_DLL_PowerUpTime; |
||
5245 | ULONG ulDDR_PLL_PowerUpTime; |
||
5246 | USHORT usPCIEClkSSPercentage; |
||
5247 | USHORT usPCIEClkSSType; |
||
5248 | USHORT usLvdsSSPercentage; |
||
5249 | USHORT usLvdsSSpreadRateIn10Hz; |
||
5250 | USHORT usHDMISSPercentage; |
||
5251 | USHORT usHDMISSpreadRateIn10Hz; |
||
5252 | USHORT usDVISSPercentage; |
||
5253 | USHORT usDVISSpreadRateIn10Hz; |
||
5254 | ULONG ulGPUReservedSysMemBaseAddrLo; |
||
5255 | ULONG ulGPUReservedSysMemBaseAddrHi; |
||
5256 | ULONG ulReserved5[3]; |
||
5257 | USHORT usMaxLVDSPclkFreqInSingleLink; |
||
5258 | UCHAR ucLvdsMisc; |
||
5259 | UCHAR ucTravisLVDSVolAdjust; |
||
5260 | UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; |
||
5261 | UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; |
||
5262 | UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; |
||
5263 | UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; |
||
5264 | UCHAR ucLVDSOffToOnDelay_in4Ms; |
||
5265 | UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; |
||
5266 | UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; |
||
5267 | UCHAR ucMinAllowedBL_Level; |
||
5268 | ULONG ulLCDBitDepthControlVal; |
||
5269 | ULONG ulNbpStateMemclkFreq[4]; |
||
5270 | ULONG ulReserved6; |
||
5271 | ULONG ulNbpStateNClkFreq[4]; |
||
5272 | USHORT usNBPStateVoltage[4]; |
||
5273 | USHORT usBootUpNBVoltage; |
||
5274 | USHORT usReserved2; |
||
5275 | ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; |
||
5276 | }ATOM_INTEGRATED_SYSTEM_INFO_V1_8; |
||
5277 | |||
5278 | /********************************************************************************************************************** |
||
5279 | ATOM_INTEGRATED_SYSTEM_INFO_V1_8 Description |
||
5280 | ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock |
||
5281 | ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. |
||
5282 | ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. |
||
5283 | sDISPCLK_Voltage: Report Display clock frequency requirement on GNB voltage(up to 4 voltage levels). |
||
5284 | |||
5285 | ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: |
||
5286 | ATOM_DEVICE_CRT1_SUPPORT 0x0001 |
||
5287 | ATOM_DEVICE_DFP1_SUPPORT 0x0008 |
||
5288 | ATOM_DEVICE_DFP6_SUPPORT 0x0040 |
||
5289 | ATOM_DEVICE_DFP2_SUPPORT 0x0080 |
||
5290 | ATOM_DEVICE_DFP3_SUPPORT 0x0200 |
||
5291 | ATOM_DEVICE_DFP4_SUPPORT 0x0400 |
||
5292 | ATOM_DEVICE_DFP5_SUPPORT 0x0800 |
||
5293 | ATOM_DEVICE_LCD1_SUPPORT 0x0002 |
||
5294 | |||
5295 | ulVBIOSMisc: Miscellenous flags for VBIOS requirement and interface |
||
5296 | bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. |
||
5297 | =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. |
||
5298 | bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS |
||
5299 | =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS |
||
5300 | bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS |
||
5301 | =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS |
||
5302 | bit[3]=0: VBIOS fast boot is disable |
||
5303 | =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) |
||
5304 | |||
5305 | ulGPUCapInfo: bit[0~2]= Reserved |
||
5306 | bit[3]=0: Enable AUX HW mode detection logic |
||
5307 | =1: Disable AUX HW mode detection logic |
||
5308 | bit[4]=0: Disable DFS bypass feature |
||
5309 | =1: Enable DFS bypass feature |
||
5310 | |||
5311 | usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). |
||
5312 | Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; |
||
5313 | |||
5314 | When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: |
||
5315 | 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; |
||
5316 | VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, |
||
5317 | Changing BL using VBIOS function is functional in both driver and non-driver present environment; |
||
5318 | and enabling VariBri under the driver environment from PP table is optional. |
||
5319 | |||
5320 | 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating |
||
5321 | that BL control from GPU is expected. |
||
5322 | VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 |
||
5323 | Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but |
||
5324 | it's per platform |
||
5325 | and enabling VariBri under the driver environment from PP table is optional. |
||
5326 | |||
5327 | ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. Threshold on value to enter HTC_active state. |
||
5328 | ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. |
||
5329 | To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. |
||
5330 | |||
5331 | ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled |
||
5332 | =1: PCIE Power Gating Enabled |
||
5333 | Bit[1]=0: DDR-DLL shut-down feature disabled. |
||
5334 | 1: DDR-DLL shut-down feature enabled. |
||
5335 | Bit[2]=0: DDR-PLL Power down feature disabled. |
||
5336 | 1: DDR-PLL Power down feature enabled. |
||
5337 | Bit[3]=0: GNB DPM is disabled |
||
5338 | =1: GNB DPM is enabled |
||
5339 | ulCPUCapInfo: TBD |
||
5340 | |||
5341 | usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure |
||
5342 | usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set |
||
5343 | to indicate a range. |
||
5344 | SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 |
||
5345 | SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 |
||
5346 | SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 |
||
5347 | SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 |
||
5348 | |||
5349 | ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3;=5:GDDR5; [7:4] is reserved. |
||
5350 | ucUMAChannelNumber: System memory channel numbers. |
||
5351 | |||
5352 | strVBIOSMsg[40]: VBIOS boot up customized message string |
||
5353 | |||
5354 | sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high |
||
5355 | |||
5356 | ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. |
||
5357 | ulIdleNClk: NCLK speed while memory runs in self-refresh state, used to calculate self-refresh latency. Unit in 10kHz. |
||
5358 | ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. |
||
5359 | ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. |
||
5360 | |||
5361 | usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%. |
||
5362 | usPCIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread. |
||
5363 | usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. |
||
5364 | usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
5365 | usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
5366 | usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
5367 | usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. |
||
5368 | usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. |
||
5369 | |||
5370 | usGPUReservedSysMemSize: Reserved system memory size for ACP engine in APU GNB, units in MB. 0/2/4MB based on CMOS options, current default could be 0MB. KV only, not on KB. |
||
5371 | ulGPUReservedSysMemBaseAddrLo: Low 32 bits base address to the reserved system memory. |
||
5372 | ulGPUReservedSysMemBaseAddrHi: High 32 bits base address to the reserved system memory. |
||
5373 | |||
5374 | usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz |
||
5375 | ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode |
||
5376 | [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped |
||
5377 | [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color |
||
5378 | [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used |
||
5379 | [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) |
||
5380 | [bit5] Travid LVDS output voltage override enable, when =1, use ucTravisLVDSVolAdjust value to overwrite Traivs register LVDS_CTRL_4 |
||
5381 | ucTravisLVDSVolAdjust When ucLVDSMisc[5]=1,it means platform SBIOS want to overwrite TravisLVDSVoltage. Then VBIOS will use ucTravisLVDSVolAdjust |
||
5382 | value to program Travis register LVDS_CTRL_4 |
||
5383 | ucLVDSPwrOnSeqDIGONtoDE_in4Ms: |
||
5384 | LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). |
||
5385 | =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. |
||
5386 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5387 | ucLVDSPwrOnDEtoVARY_BL_in4Ms: |
||
5388 | LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). |
||
5389 | =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. |
||
5390 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5391 | ucLVDSPwrOffVARY_BLtoDE_in4Ms: |
||
5392 | LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. |
||
5393 | =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON |
||
5394 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5395 | ucLVDSPwrOffDEtoDIGON_in4Ms: |
||
5396 | LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. |
||
5397 | =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON |
||
5398 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5399 | ucLVDSOffToOnDelay_in4Ms: |
||
5400 | LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. |
||
5401 | =0 means to use VBIOS default delay which is 125 ( 500ms ). |
||
5402 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5403 | ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms: |
||
5404 | LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. |
||
5405 | =0 means to use VBIOS default delay which is 0 ( 0ms ). |
||
5406 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5407 | |||
5408 | ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms: |
||
5409 | LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. |
||
5410 | =0 means to use VBIOS default delay which is 0 ( 0ms ). |
||
5411 | This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. |
||
5412 | ucMinAllowedBL_Level: Lowest LCD backlight PWM level. This is customer platform specific parameters. By default it is 0. |
||
5413 | |||
5414 | ulLCDBitDepthControlVal: GPU display control encoder bit dither control setting, used to program register mmFMT_BIT_DEPTH_CONTROL |
||
5415 | |||
5416 | ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-State(P0, P1, P2 & P3). |
||
5417 | ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State |
||
5418 | usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage |
||
5419 | usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded |
||
5420 | sExtDispConnInfo: Display connector information table provided to VBIOS |
||
5421 | |||
5422 | **********************************************************************************************************************/ |
||
5423 | |||
5424 | // this Table is used for Kaveri/Kabini APU |
||
5425 | typedef struct _ATOM_FUSION_SYSTEM_INFO_V2 |
||
5426 | { |
||
5427 | ATOM_INTEGRATED_SYSTEM_INFO_V1_8 sIntegratedSysInfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition |
||
5428 | ULONG ulPowerplayTable[128]; // Update comments here to link new powerplay table definition structure |
||
5429 | }ATOM_FUSION_SYSTEM_INFO_V2; |
||
5430 | |||
5431 | |||
1117 | serge | 5432 | /**************************************************************************/ |
1430 | serge | 5433 | // This portion is only used when ext thermal chip or engine/memory clock SS chip is populated on a design |
5434 | //Memory SS Info Table |
||
5435 | //Define Memory Clock SS chip ID |
||
1117 | serge | 5436 | #define ICS91719 1 |
5437 | #define ICS91720 2 |
||
5438 | |||
1430 | serge | 5439 | //Define one structure to inform SW a "block of data" writing to external SS chip via I2C protocol |
5440 | typedef struct _ATOM_I2C_DATA_RECORD |
||
5441 | { |
||
5442 | UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" |
||
5443 | UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually |
||
5444 | }ATOM_I2C_DATA_RECORD; |
||
1117 | serge | 5445 | |
1430 | serge | 5446 | |
5447 | //Define one structure to inform SW how many blocks of data writing to external SS chip via I2C protocol, in addition to other information |
||
5448 | typedef struct _ATOM_I2C_DEVICE_SETUP_INFO |
||
5449 | { |
||
5450 | ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //I2C line and HW/SW assisted cap. |
||
5451 | UCHAR ucSSChipID; //SS chip being used |
||
5452 | UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip |
||
5453 | UCHAR ucNumOfI2CDataRecords; //number of data block |
||
6104 | serge | 5454 | ATOM_I2C_DATA_RECORD asI2CData[1]; |
1430 | serge | 5455 | }ATOM_I2C_DEVICE_SETUP_INFO; |
1117 | serge | 5456 | |
1430 | serge | 5457 | //========================================================================================== |
5458 | typedef struct _ATOM_ASIC_MVDD_INFO |
||
5459 | { |
||
6104 | serge | 5460 | ATOM_COMMON_TABLE_HEADER sHeader; |
5461 | ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1]; |
||
1430 | serge | 5462 | }ATOM_ASIC_MVDD_INFO; |
1117 | serge | 5463 | |
1430 | serge | 5464 | //========================================================================================== |
1117 | serge | 5465 | #define ATOM_MCLK_SS_INFO ATOM_ASIC_MVDD_INFO |
5466 | |||
1430 | serge | 5467 | //========================================================================================== |
1117 | serge | 5468 | /**************************************************************************/ |
5469 | |||
1430 | serge | 5470 | typedef struct _ATOM_ASIC_SS_ASSIGNMENT |
5471 | { |
||
5472 | ULONG ulTargetClockRange; //Clock Out frequence (VCO ), in unit of 10Khz |
||
5473 | USHORT usSpreadSpectrumPercentage; //in unit of 0.01% |
||
5474 | USHORT usSpreadRateInKhz; //in unit of kHz, modulation freq |
||
5475 | UCHAR ucClockIndication; //Indicate which clock source needs SS |
||
5476 | UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread. |
||
6104 | serge | 5477 | UCHAR ucReserved[2]; |
1430 | serge | 5478 | }ATOM_ASIC_SS_ASSIGNMENT; |
1117 | serge | 5479 | |
1963 | serge | 5480 | //Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type. |
1430 | serge | 5481 | //SS is not required or enabled if a match is not found. |
6104 | serge | 5482 | #define ASIC_INTERNAL_MEMORY_SS 1 |
5483 | #define ASIC_INTERNAL_ENGINE_SS 2 |
||
5484 | #define ASIC_INTERNAL_UVD_SS 3 |
||
5485 | #define ASIC_INTERNAL_SS_ON_TMDS 4 |
||
5486 | #define ASIC_INTERNAL_SS_ON_HDMI 5 |
||
5487 | #define ASIC_INTERNAL_SS_ON_LVDS 6 |
||
5488 | #define ASIC_INTERNAL_SS_ON_DP 7 |
||
5489 | #define ASIC_INTERNAL_SS_ON_DCPLL 8 |
||
5490 | #define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 |
||
5491 | #define ASIC_INTERNAL_VCE_SS 10 |
||
5078 | serge | 5492 | #define ASIC_INTERNAL_GPUPLL_SS 11 |
1117 | serge | 5493 | |
5078 | serge | 5494 | |
1430 | serge | 5495 | typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2 |
5496 | { |
||
5497 | ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz |
||
5498 | //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 ) |
||
5078 | serge | 5499 | USHORT usSpreadSpectrumPercentage; //in unit of 0.01% or 0.001%, decided by ucSpreadSpectrumMode bit4 |
1430 | serge | 5500 | USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq |
5501 | UCHAR ucClockIndication; //Indicate which clock source needs SS |
||
5502 | UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS |
||
5503 | UCHAR ucReserved[2]; |
||
5504 | }ATOM_ASIC_SS_ASSIGNMENT_V2; |
||
5505 | |||
5506 | //ucSpreadSpectrumMode |
||
5507 | //#define ATOM_SS_DOWN_SPREAD_MODE_MASK 0x00000000 |
||
5508 | //#define ATOM_SS_DOWN_SPREAD_MODE 0x00000000 |
||
5509 | //#define ATOM_SS_CENTRE_SPREAD_MODE_MASK 0x00000001 |
||
5510 | //#define ATOM_SS_CENTRE_SPREAD_MODE 0x00000001 |
||
5511 | //#define ATOM_INTERNAL_SS_MASK 0x00000000 |
||
5512 | //#define ATOM_EXTERNAL_SS_MASK 0x00000002 |
||
5513 | |||
5514 | typedef struct _ATOM_ASIC_INTERNAL_SS_INFO |
||
5515 | { |
||
6104 | serge | 5516 | ATOM_COMMON_TABLE_HEADER sHeader; |
5517 | ATOM_ASIC_SS_ASSIGNMENT asSpreadSpectrum[4]; |
||
1430 | serge | 5518 | }ATOM_ASIC_INTERNAL_SS_INFO; |
1117 | serge | 5519 | |
1430 | serge | 5520 | typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2 |
5521 | { |
||
5522 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
5523 | ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[1]; //this is point only. |
||
5524 | }ATOM_ASIC_INTERNAL_SS_INFO_V2; |
||
5525 | |||
5526 | typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3 |
||
5527 | { |
||
5528 | ULONG ulTargetClockRange; //For mem/engine/uvd, Clock Out frequence (VCO ), in unit of 10Khz |
||
5529 | //For TMDS/HDMI/LVDS, it is pixel clock , for DP, it is link clock ( 27000 or 16200 ) |
||
5530 | USHORT usSpreadSpectrumPercentage; //in unit of 0.01% |
||
5531 | USHORT usSpreadRateIn10Hz; //in unit of 10Hz, modulation freq |
||
5532 | UCHAR ucClockIndication; //Indicate which clock source needs SS |
||
5533 | UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS bit1=1: external SS |
||
5534 | UCHAR ucReserved[2]; |
||
5535 | }ATOM_ASIC_SS_ASSIGNMENT_V3; |
||
5536 | |||
5078 | serge | 5537 | //ATOM_ASIC_SS_ASSIGNMENT_V3.ucSpreadSpectrumMode |
5538 | #define SS_MODE_V3_CENTRE_SPREAD_MASK 0x01 |
||
5539 | #define SS_MODE_V3_EXTERNAL_SS_MASK 0x02 |
||
5540 | #define SS_MODE_V3_PERCENTAGE_DIV_BY_1000_MASK 0x10 |
||
5541 | |||
1430 | serge | 5542 | typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 |
5543 | { |
||
5544 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
5545 | ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[1]; //this is pointer only. |
||
5546 | }ATOM_ASIC_INTERNAL_SS_INFO_V3; |
||
5547 | |||
5548 | |||
5549 | //==============================Scratch Pad Definition Portion=============================== |
||
1117 | serge | 5550 | #define ATOM_DEVICE_CONNECT_INFO_DEF 0 |
5551 | #define ATOM_ROM_LOCATION_DEF 1 |
||
5552 | #define ATOM_TV_STANDARD_DEF 2 |
||
5553 | #define ATOM_ACTIVE_INFO_DEF 3 |
||
5554 | #define ATOM_LCD_INFO_DEF 4 |
||
5555 | #define ATOM_DOS_REQ_INFO_DEF 5 |
||
5556 | #define ATOM_ACC_CHANGE_INFO_DEF 6 |
||
5557 | #define ATOM_DOS_MODE_INFO_DEF 7 |
||
5558 | #define ATOM_I2C_CHANNEL_STATUS_DEF 8 |
||
5559 | #define ATOM_I2C_CHANNEL_STATUS1_DEF 9 |
||
2997 | Serge | 5560 | #define ATOM_INTERNAL_TIMER_DEF 10 |
1117 | serge | 5561 | |
1430 | serge | 5562 | // BIOS_0_SCRATCH Definition |
1117 | serge | 5563 | #define ATOM_S0_CRT1_MONO 0x00000001L |
5564 | #define ATOM_S0_CRT1_COLOR 0x00000002L |
||
5565 | #define ATOM_S0_CRT1_MASK (ATOM_S0_CRT1_MONO+ATOM_S0_CRT1_COLOR) |
||
5566 | |||
5567 | #define ATOM_S0_TV1_COMPOSITE_A 0x00000004L |
||
5568 | #define ATOM_S0_TV1_SVIDEO_A 0x00000008L |
||
5569 | #define ATOM_S0_TV1_MASK_A (ATOM_S0_TV1_COMPOSITE_A+ATOM_S0_TV1_SVIDEO_A) |
||
5570 | |||
5571 | #define ATOM_S0_CV_A 0x00000010L |
||
5572 | #define ATOM_S0_CV_DIN_A 0x00000020L |
||
5573 | #define ATOM_S0_CV_MASK_A (ATOM_S0_CV_A+ATOM_S0_CV_DIN_A) |
||
5574 | |||
1430 | serge | 5575 | |
1117 | serge | 5576 | #define ATOM_S0_CRT2_MONO 0x00000100L |
5577 | #define ATOM_S0_CRT2_COLOR 0x00000200L |
||
5578 | #define ATOM_S0_CRT2_MASK (ATOM_S0_CRT2_MONO+ATOM_S0_CRT2_COLOR) |
||
5579 | |||
5580 | #define ATOM_S0_TV1_COMPOSITE 0x00000400L |
||
5581 | #define ATOM_S0_TV1_SVIDEO 0x00000800L |
||
5582 | #define ATOM_S0_TV1_SCART 0x00004000L |
||
5583 | #define ATOM_S0_TV1_MASK (ATOM_S0_TV1_COMPOSITE+ATOM_S0_TV1_SVIDEO+ATOM_S0_TV1_SCART) |
||
5584 | |||
5585 | #define ATOM_S0_CV 0x00001000L |
||
5586 | #define ATOM_S0_CV_DIN 0x00002000L |
||
5587 | #define ATOM_S0_CV_MASK (ATOM_S0_CV+ATOM_S0_CV_DIN) |
||
5588 | |||
5589 | #define ATOM_S0_DFP1 0x00010000L |
||
5590 | #define ATOM_S0_DFP2 0x00020000L |
||
5591 | #define ATOM_S0_LCD1 0x00040000L |
||
5592 | #define ATOM_S0_LCD2 0x00080000L |
||
1430 | serge | 5593 | #define ATOM_S0_DFP6 0x00100000L |
6104 | serge | 5594 | #define ATOM_S0_DFP3 0x00200000L |
5595 | #define ATOM_S0_DFP4 0x00400000L |
||
5596 | #define ATOM_S0_DFP5 0x00800000L |
||
1117 | serge | 5597 | |
1430 | serge | 5598 | #define ATOM_S0_DFP_MASK ATOM_S0_DFP1 | ATOM_S0_DFP2 | ATOM_S0_DFP3 | ATOM_S0_DFP4 | ATOM_S0_DFP5 | ATOM_S0_DFP6 |
1117 | serge | 5599 | |
1430 | serge | 5600 | #define ATOM_S0_FAD_REGISTER_BUG 0x02000000L // If set, indicates we are running a PCIE asic with |
5601 | // the FAD/HDP reg access bug. Bit is read by DAL, this is obsolete from RV5xx |
||
1117 | serge | 5602 | |
5603 | #define ATOM_S0_THERMAL_STATE_MASK 0x1C000000L |
||
5604 | #define ATOM_S0_THERMAL_STATE_SHIFT 26 |
||
5605 | |||
5606 | #define ATOM_S0_SYSTEM_POWER_STATE_MASK 0xE0000000L |
||
6104 | serge | 5607 | #define ATOM_S0_SYSTEM_POWER_STATE_SHIFT 29 |
1117 | serge | 5608 | |
5609 | #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_AC 1 |
||
5610 | #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2 |
||
5611 | #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3 |
||
1963 | serge | 5612 | #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4 |
1117 | serge | 5613 | |
1963 | serge | 5614 | //Byte aligned definition for BIOS usage |
1117 | serge | 5615 | #define ATOM_S0_CRT1_MONOb0 0x01 |
5616 | #define ATOM_S0_CRT1_COLORb0 0x02 |
||
5617 | #define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0) |
||
5618 | |||
5619 | #define ATOM_S0_TV1_COMPOSITEb0 0x04 |
||
5620 | #define ATOM_S0_TV1_SVIDEOb0 0x08 |
||
5621 | #define ATOM_S0_TV1_MASKb0 (ATOM_S0_TV1_COMPOSITEb0+ATOM_S0_TV1_SVIDEOb0) |
||
5622 | |||
5623 | #define ATOM_S0_CVb0 0x10 |
||
5624 | #define ATOM_S0_CV_DINb0 0x20 |
||
5625 | #define ATOM_S0_CV_MASKb0 (ATOM_S0_CVb0+ATOM_S0_CV_DINb0) |
||
5626 | |||
5627 | #define ATOM_S0_CRT2_MONOb1 0x01 |
||
5628 | #define ATOM_S0_CRT2_COLORb1 0x02 |
||
5629 | #define ATOM_S0_CRT2_MASKb1 (ATOM_S0_CRT2_MONOb1+ATOM_S0_CRT2_COLORb1) |
||
5630 | |||
5631 | #define ATOM_S0_TV1_COMPOSITEb1 0x04 |
||
5632 | #define ATOM_S0_TV1_SVIDEOb1 0x08 |
||
5633 | #define ATOM_S0_TV1_SCARTb1 0x40 |
||
5634 | #define ATOM_S0_TV1_MASKb1 (ATOM_S0_TV1_COMPOSITEb1+ATOM_S0_TV1_SVIDEOb1+ATOM_S0_TV1_SCARTb1) |
||
5635 | |||
5636 | #define ATOM_S0_CVb1 0x10 |
||
5637 | #define ATOM_S0_CV_DINb1 0x20 |
||
5638 | #define ATOM_S0_CV_MASKb1 (ATOM_S0_CVb1+ATOM_S0_CV_DINb1) |
||
5639 | |||
5640 | #define ATOM_S0_DFP1b2 0x01 |
||
5641 | #define ATOM_S0_DFP2b2 0x02 |
||
5642 | #define ATOM_S0_LCD1b2 0x04 |
||
5643 | #define ATOM_S0_LCD2b2 0x08 |
||
1430 | serge | 5644 | #define ATOM_S0_DFP6b2 0x10 |
6104 | serge | 5645 | #define ATOM_S0_DFP3b2 0x20 |
1430 | serge | 5646 | #define ATOM_S0_DFP4b2 0x40 |
5647 | #define ATOM_S0_DFP5b2 0x80 |
||
1117 | serge | 5648 | |
1430 | serge | 5649 | |
1117 | serge | 5650 | #define ATOM_S0_THERMAL_STATE_MASKb3 0x1C |
5651 | #define ATOM_S0_THERMAL_STATE_SHIFTb3 2 |
||
5652 | |||
5653 | #define ATOM_S0_SYSTEM_POWER_STATE_MASKb3 0xE0 |
||
5654 | #define ATOM_S0_LCD1_SHIFT 18 |
||
5655 | |||
1430 | serge | 5656 | // BIOS_1_SCRATCH Definition |
1117 | serge | 5657 | #define ATOM_S1_ROM_LOCATION_MASK 0x0000FFFFL |
5658 | #define ATOM_S1_PCI_BUS_DEV_MASK 0xFFFF0000L |
||
5659 | |||
1430 | serge | 5660 | // BIOS_2_SCRATCH Definition |
1117 | serge | 5661 | #define ATOM_S2_TV1_STANDARD_MASK 0x0000000FL |
5662 | #define ATOM_S2_CURRENT_BL_LEVEL_MASK 0x0000FF00L |
||
5663 | #define ATOM_S2_CURRENT_BL_LEVEL_SHIFT 8 |
||
5664 | |||
5665 | #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK 0x0C000000L |
||
5666 | #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASK_SHIFT 26 |
||
5667 | #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGE 0x10000000L |
||
5668 | |||
1430 | serge | 5669 | #define ATOM_S2_DEVICE_DPMS_STATE 0x00010000L |
1117 | serge | 5670 | #define ATOM_S2_VRI_BRIGHT_ENABLE 0x20000000L |
5671 | |||
5672 | #define ATOM_S2_DISPLAY_ROTATION_0_DEGREE 0x0 |
||
5673 | #define ATOM_S2_DISPLAY_ROTATION_90_DEGREE 0x1 |
||
5674 | #define ATOM_S2_DISPLAY_ROTATION_180_DEGREE 0x2 |
||
5675 | #define ATOM_S2_DISPLAY_ROTATION_270_DEGREE 0x3 |
||
5676 | #define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30 |
||
5677 | #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L |
||
5678 | |||
1430 | serge | 5679 | |
1963 | serge | 5680 | //Byte aligned definition for BIOS usage |
1117 | serge | 5681 | #define ATOM_S2_TV1_STANDARD_MASKb0 0x0F |
5682 | #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF |
||
1430 | serge | 5683 | #define ATOM_S2_DEVICE_DPMS_STATEb2 0x01 |
1117 | serge | 5684 | |
5685 | #define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF |
||
5686 | #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C |
||
5687 | #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10 |
||
2997 | Serge | 5688 | #define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode |
1117 | serge | 5689 | #define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20 |
5690 | #define ATOM_S2_ROTATION_STATE_MASKb3 0xC0 |
||
5691 | |||
1430 | serge | 5692 | |
5693 | // BIOS_3_SCRATCH Definition |
||
1117 | serge | 5694 | #define ATOM_S3_CRT1_ACTIVE 0x00000001L |
5695 | #define ATOM_S3_LCD1_ACTIVE 0x00000002L |
||
5696 | #define ATOM_S3_TV1_ACTIVE 0x00000004L |
||
5697 | #define ATOM_S3_DFP1_ACTIVE 0x00000008L |
||
5698 | #define ATOM_S3_CRT2_ACTIVE 0x00000010L |
||
5699 | #define ATOM_S3_LCD2_ACTIVE 0x00000020L |
||
1430 | serge | 5700 | #define ATOM_S3_DFP6_ACTIVE 0x00000040L |
1117 | serge | 5701 | #define ATOM_S3_DFP2_ACTIVE 0x00000080L |
5702 | #define ATOM_S3_CV_ACTIVE 0x00000100L |
||
5703 | #define ATOM_S3_DFP3_ACTIVE 0x00000200L |
||
5704 | #define ATOM_S3_DFP4_ACTIVE 0x00000400L |
||
5705 | #define ATOM_S3_DFP5_ACTIVE 0x00000800L |
||
5706 | |||
1430 | serge | 5707 | #define ATOM_S3_DEVICE_ACTIVE_MASK 0x00000FFFL |
1117 | serge | 5708 | |
5709 | #define ATOM_S3_LCD_FULLEXPANSION_ACTIVE 0x00001000L |
||
5710 | #define ATOM_S3_LCD_EXPANSION_ASPEC_RATIO_ACTIVE 0x00002000L |
||
5711 | |||
5712 | #define ATOM_S3_CRT1_CRTC_ACTIVE 0x00010000L |
||
5713 | #define ATOM_S3_LCD1_CRTC_ACTIVE 0x00020000L |
||
5714 | #define ATOM_S3_TV1_CRTC_ACTIVE 0x00040000L |
||
5715 | #define ATOM_S3_DFP1_CRTC_ACTIVE 0x00080000L |
||
5716 | #define ATOM_S3_CRT2_CRTC_ACTIVE 0x00100000L |
||
5717 | #define ATOM_S3_LCD2_CRTC_ACTIVE 0x00200000L |
||
1430 | serge | 5718 | #define ATOM_S3_DFP6_CRTC_ACTIVE 0x00400000L |
1117 | serge | 5719 | #define ATOM_S3_DFP2_CRTC_ACTIVE 0x00800000L |
5720 | #define ATOM_S3_CV_CRTC_ACTIVE 0x01000000L |
||
5721 | #define ATOM_S3_DFP3_CRTC_ACTIVE 0x02000000L |
||
5722 | #define ATOM_S3_DFP4_CRTC_ACTIVE 0x04000000L |
||
5723 | #define ATOM_S3_DFP5_CRTC_ACTIVE 0x08000000L |
||
5724 | |||
5725 | #define ATOM_S3_DEVICE_CRTC_ACTIVE_MASK 0x0FFF0000L |
||
5726 | #define ATOM_S3_ASIC_GUI_ENGINE_HUNG 0x20000000L |
||
1430 | serge | 5727 | //Below two definitions are not supported in pplib, but in the old powerplay in DAL |
1117 | serge | 5728 | #define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L |
5729 | #define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L |
||
5730 | |||
1963 | serge | 5731 | //Byte aligned definition for BIOS usage |
1117 | serge | 5732 | #define ATOM_S3_CRT1_ACTIVEb0 0x01 |
5733 | #define ATOM_S3_LCD1_ACTIVEb0 0x02 |
||
5734 | #define ATOM_S3_TV1_ACTIVEb0 0x04 |
||
5735 | #define ATOM_S3_DFP1_ACTIVEb0 0x08 |
||
5736 | #define ATOM_S3_CRT2_ACTIVEb0 0x10 |
||
5737 | #define ATOM_S3_LCD2_ACTIVEb0 0x20 |
||
1430 | serge | 5738 | #define ATOM_S3_DFP6_ACTIVEb0 0x40 |
1117 | serge | 5739 | #define ATOM_S3_DFP2_ACTIVEb0 0x80 |
5740 | #define ATOM_S3_CV_ACTIVEb1 0x01 |
||
5741 | #define ATOM_S3_DFP3_ACTIVEb1 0x02 |
||
5742 | #define ATOM_S3_DFP4_ACTIVEb1 0x04 |
||
5743 | #define ATOM_S3_DFP5_ACTIVEb1 0x08 |
||
5744 | |||
5745 | #define ATOM_S3_ACTIVE_CRTC1w0 0xFFF |
||
5746 | |||
5747 | #define ATOM_S3_CRT1_CRTC_ACTIVEb2 0x01 |
||
5748 | #define ATOM_S3_LCD1_CRTC_ACTIVEb2 0x02 |
||
5749 | #define ATOM_S3_TV1_CRTC_ACTIVEb2 0x04 |
||
5750 | #define ATOM_S3_DFP1_CRTC_ACTIVEb2 0x08 |
||
5751 | #define ATOM_S3_CRT2_CRTC_ACTIVEb2 0x10 |
||
5752 | #define ATOM_S3_LCD2_CRTC_ACTIVEb2 0x20 |
||
1430 | serge | 5753 | #define ATOM_S3_DFP6_CRTC_ACTIVEb2 0x40 |
1117 | serge | 5754 | #define ATOM_S3_DFP2_CRTC_ACTIVEb2 0x80 |
5755 | #define ATOM_S3_CV_CRTC_ACTIVEb3 0x01 |
||
5756 | #define ATOM_S3_DFP3_CRTC_ACTIVEb3 0x02 |
||
5757 | #define ATOM_S3_DFP4_CRTC_ACTIVEb3 0x04 |
||
5758 | #define ATOM_S3_DFP5_CRTC_ACTIVEb3 0x08 |
||
5759 | |||
5760 | #define ATOM_S3_ACTIVE_CRTC2w1 0xFFF |
||
5761 | |||
1430 | serge | 5762 | // BIOS_4_SCRATCH Definition |
1117 | serge | 5763 | #define ATOM_S4_LCD1_PANEL_ID_MASK 0x000000FFL |
5764 | #define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L |
||
5765 | #define ATOM_S4_LCD1_REFRESH_SHIFT 8 |
||
5766 | |||
1963 | serge | 5767 | //Byte aligned definition for BIOS usage |
1117 | serge | 5768 | #define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF |
5769 | #define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0 |
||
5770 | #define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0 |
||
5771 | |||
1430 | serge | 5772 | // BIOS_5_SCRATCH Definition, BIOS_5_SCRATCH is used by Firmware only !!!! |
1117 | serge | 5773 | #define ATOM_S5_DOS_REQ_CRT1b0 0x01 |
5774 | #define ATOM_S5_DOS_REQ_LCD1b0 0x02 |
||
5775 | #define ATOM_S5_DOS_REQ_TV1b0 0x04 |
||
5776 | #define ATOM_S5_DOS_REQ_DFP1b0 0x08 |
||
5777 | #define ATOM_S5_DOS_REQ_CRT2b0 0x10 |
||
5778 | #define ATOM_S5_DOS_REQ_LCD2b0 0x20 |
||
1430 | serge | 5779 | #define ATOM_S5_DOS_REQ_DFP6b0 0x40 |
1117 | serge | 5780 | #define ATOM_S5_DOS_REQ_DFP2b0 0x80 |
5781 | #define ATOM_S5_DOS_REQ_CVb1 0x01 |
||
5782 | #define ATOM_S5_DOS_REQ_DFP3b1 0x02 |
||
5783 | #define ATOM_S5_DOS_REQ_DFP4b1 0x04 |
||
5784 | #define ATOM_S5_DOS_REQ_DFP5b1 0x08 |
||
5785 | |||
1430 | serge | 5786 | #define ATOM_S5_DOS_REQ_DEVICEw0 0x0FFF |
1117 | serge | 5787 | |
5788 | #define ATOM_S5_DOS_REQ_CRT1 0x0001 |
||
5789 | #define ATOM_S5_DOS_REQ_LCD1 0x0002 |
||
5790 | #define ATOM_S5_DOS_REQ_TV1 0x0004 |
||
5791 | #define ATOM_S5_DOS_REQ_DFP1 0x0008 |
||
5792 | #define ATOM_S5_DOS_REQ_CRT2 0x0010 |
||
5793 | #define ATOM_S5_DOS_REQ_LCD2 0x0020 |
||
1430 | serge | 5794 | #define ATOM_S5_DOS_REQ_DFP6 0x0040 |
1117 | serge | 5795 | #define ATOM_S5_DOS_REQ_DFP2 0x0080 |
5796 | #define ATOM_S5_DOS_REQ_CV 0x0100 |
||
6104 | serge | 5797 | #define ATOM_S5_DOS_REQ_DFP3 0x0200 |
5798 | #define ATOM_S5_DOS_REQ_DFP4 0x0400 |
||
5799 | #define ATOM_S5_DOS_REQ_DFP5 0x0800 |
||
1117 | serge | 5800 | |
5801 | #define ATOM_S5_DOS_FORCE_CRT1b2 ATOM_S5_DOS_REQ_CRT1b0 |
||
5802 | #define ATOM_S5_DOS_FORCE_TV1b2 ATOM_S5_DOS_REQ_TV1b0 |
||
5803 | #define ATOM_S5_DOS_FORCE_CRT2b2 ATOM_S5_DOS_REQ_CRT2b0 |
||
5804 | #define ATOM_S5_DOS_FORCE_CVb3 ATOM_S5_DOS_REQ_CVb1 |
||
1430 | serge | 5805 | #define ATOM_S5_DOS_FORCE_DEVICEw1 (ATOM_S5_DOS_FORCE_CRT1b2+ATOM_S5_DOS_FORCE_TV1b2+ATOM_S5_DOS_FORCE_CRT2b2+\ |
5806 | (ATOM_S5_DOS_FORCE_CVb3<<8)) |
||
1117 | serge | 5807 | |
1430 | serge | 5808 | // BIOS_6_SCRATCH Definition |
1117 | serge | 5809 | #define ATOM_S6_DEVICE_CHANGE 0x00000001L |
5810 | #define ATOM_S6_SCALER_CHANGE 0x00000002L |
||
5811 | #define ATOM_S6_LID_CHANGE 0x00000004L |
||
5812 | #define ATOM_S6_DOCKING_CHANGE 0x00000008L |
||
5813 | #define ATOM_S6_ACC_MODE 0x00000010L |
||
5814 | #define ATOM_S6_EXT_DESKTOP_MODE 0x00000020L |
||
5815 | #define ATOM_S6_LID_STATE 0x00000040L |
||
5816 | #define ATOM_S6_DOCK_STATE 0x00000080L |
||
5817 | #define ATOM_S6_CRITICAL_STATE 0x00000100L |
||
5818 | #define ATOM_S6_HW_I2C_BUSY_STATE 0x00000200L |
||
5819 | #define ATOM_S6_THERMAL_STATE_CHANGE 0x00000400L |
||
5820 | #define ATOM_S6_INTERRUPT_SET_BY_BIOS 0x00000800L |
||
1430 | serge | 5821 | #define ATOM_S6_REQ_LCD_EXPANSION_FULL 0x00001000L //Normal expansion Request bit for LCD |
5822 | #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIO 0x00002000L //Aspect ratio expansion Request bit for LCD |
||
1117 | serge | 5823 | |
1430 | serge | 5824 | #define ATOM_S6_DISPLAY_STATE_CHANGE 0x00004000L //This bit is recycled when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_H_expansion |
5825 | #define ATOM_S6_I2C_STATE_CHANGE 0x00008000L //This bit is recycled,when ATOM_BIOS_INFO_BIOS_SCRATCH6_SCL2_REDEFINE is set,previously it's SCL2_V_expansion |
||
1117 | serge | 5826 | |
5827 | #define ATOM_S6_ACC_REQ_CRT1 0x00010000L |
||
5828 | #define ATOM_S6_ACC_REQ_LCD1 0x00020000L |
||
5829 | #define ATOM_S6_ACC_REQ_TV1 0x00040000L |
||
5830 | #define ATOM_S6_ACC_REQ_DFP1 0x00080000L |
||
5831 | #define ATOM_S6_ACC_REQ_CRT2 0x00100000L |
||
5832 | #define ATOM_S6_ACC_REQ_LCD2 0x00200000L |
||
1430 | serge | 5833 | #define ATOM_S6_ACC_REQ_DFP6 0x00400000L |
1117 | serge | 5834 | #define ATOM_S6_ACC_REQ_DFP2 0x00800000L |
5835 | #define ATOM_S6_ACC_REQ_CV 0x01000000L |
||
5836 | #define ATOM_S6_ACC_REQ_DFP3 0x02000000L |
||
5837 | #define ATOM_S6_ACC_REQ_DFP4 0x04000000L |
||
5838 | #define ATOM_S6_ACC_REQ_DFP5 0x08000000L |
||
5839 | |||
5840 | #define ATOM_S6_ACC_REQ_MASK 0x0FFF0000L |
||
5841 | #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE 0x10000000L |
||
5842 | #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH 0x20000000L |
||
5843 | #define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L |
||
5844 | #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L |
||
5845 | |||
1963 | serge | 5846 | //Byte aligned definition for BIOS usage |
1117 | serge | 5847 | #define ATOM_S6_DEVICE_CHANGEb0 0x01 |
5848 | #define ATOM_S6_SCALER_CHANGEb0 0x02 |
||
5849 | #define ATOM_S6_LID_CHANGEb0 0x04 |
||
5850 | #define ATOM_S6_DOCKING_CHANGEb0 0x08 |
||
5851 | #define ATOM_S6_ACC_MODEb0 0x10 |
||
5852 | #define ATOM_S6_EXT_DESKTOP_MODEb0 0x20 |
||
5853 | #define ATOM_S6_LID_STATEb0 0x40 |
||
5854 | #define ATOM_S6_DOCK_STATEb0 0x80 |
||
5855 | #define ATOM_S6_CRITICAL_STATEb1 0x01 |
||
6104 | serge | 5856 | #define ATOM_S6_HW_I2C_BUSY_STATEb1 0x02 |
1117 | serge | 5857 | #define ATOM_S6_THERMAL_STATE_CHANGEb1 0x04 |
5858 | #define ATOM_S6_INTERRUPT_SET_BY_BIOSb1 0x08 |
||
6104 | serge | 5859 | #define ATOM_S6_REQ_LCD_EXPANSION_FULLb1 0x10 |
5860 | #define ATOM_S6_REQ_LCD_EXPANSION_ASPEC_RATIOb1 0x20 |
||
1117 | serge | 5861 | |
5862 | #define ATOM_S6_ACC_REQ_CRT1b2 0x01 |
||
5863 | #define ATOM_S6_ACC_REQ_LCD1b2 0x02 |
||
5864 | #define ATOM_S6_ACC_REQ_TV1b2 0x04 |
||
5865 | #define ATOM_S6_ACC_REQ_DFP1b2 0x08 |
||
5866 | #define ATOM_S6_ACC_REQ_CRT2b2 0x10 |
||
5867 | #define ATOM_S6_ACC_REQ_LCD2b2 0x20 |
||
1430 | serge | 5868 | #define ATOM_S6_ACC_REQ_DFP6b2 0x40 |
1117 | serge | 5869 | #define ATOM_S6_ACC_REQ_DFP2b2 0x80 |
5870 | #define ATOM_S6_ACC_REQ_CVb3 0x01 |
||
6104 | serge | 5871 | #define ATOM_S6_ACC_REQ_DFP3b3 0x02 |
5872 | #define ATOM_S6_ACC_REQ_DFP4b3 0x04 |
||
5873 | #define ATOM_S6_ACC_REQ_DFP5b3 0x08 |
||
1117 | serge | 5874 | |
5875 | #define ATOM_S6_ACC_REQ_DEVICEw1 ATOM_S5_DOS_REQ_DEVICEw0 |
||
5876 | #define ATOM_S6_SYSTEM_POWER_MODE_CHANGEb3 0x10 |
||
5877 | #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCHb3 0x20 |
||
5878 | #define ATOM_S6_VRI_BRIGHTNESS_CHANGEb3 0x40 |
||
5879 | #define ATOM_S6_CONFIG_DISPLAY_CHANGEb3 0x80 |
||
5880 | |||
5881 | #define ATOM_S6_DEVICE_CHANGE_SHIFT 0 |
||
5882 | #define ATOM_S6_SCALER_CHANGE_SHIFT 1 |
||
5883 | #define ATOM_S6_LID_CHANGE_SHIFT 2 |
||
5884 | #define ATOM_S6_DOCKING_CHANGE_SHIFT 3 |
||
5885 | #define ATOM_S6_ACC_MODE_SHIFT 4 |
||
5886 | #define ATOM_S6_EXT_DESKTOP_MODE_SHIFT 5 |
||
5887 | #define ATOM_S6_LID_STATE_SHIFT 6 |
||
5888 | #define ATOM_S6_DOCK_STATE_SHIFT 7 |
||
5889 | #define ATOM_S6_CRITICAL_STATE_SHIFT 8 |
||
5890 | #define ATOM_S6_HW_I2C_BUSY_STATE_SHIFT 9 |
||
5891 | #define ATOM_S6_THERMAL_STATE_CHANGE_SHIFT 10 |
||
5892 | #define ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT 11 |
||
5893 | #define ATOM_S6_REQ_SCALER_SHIFT 12 |
||
5894 | #define ATOM_S6_REQ_SCALER_ARATIO_SHIFT 13 |
||
5895 | #define ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT 14 |
||
5896 | #define ATOM_S6_I2C_STATE_CHANGE_SHIFT 15 |
||
5897 | #define ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT 28 |
||
5898 | #define ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH_SHIFT 29 |
||
5899 | #define ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT 30 |
||
5900 | #define ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT 31 |
||
5901 | |||
1430 | serge | 5902 | // BIOS_7_SCRATCH Definition, BIOS_7_SCRATCH is used by Firmware only !!!! |
1117 | serge | 5903 | #define ATOM_S7_DOS_MODE_TYPEb0 0x03 |
5904 | #define ATOM_S7_DOS_MODE_VGAb0 0x00 |
||
5905 | #define ATOM_S7_DOS_MODE_VESAb0 0x01 |
||
5906 | #define ATOM_S7_DOS_MODE_EXTb0 0x02 |
||
5907 | #define ATOM_S7_DOS_MODE_PIXEL_DEPTHb0 0x0C |
||
5908 | #define ATOM_S7_DOS_MODE_PIXEL_FORMATb0 0xF0 |
||
5909 | #define ATOM_S7_DOS_8BIT_DAC_ENb1 0x01 |
||
5078 | serge | 5910 | #define ATOM_S7_ASIC_INIT_COMPLETEb1 0x02 |
5911 | #define ATOM_S7_ASIC_INIT_COMPLETE_MASK 0x00000200 |
||
1117 | serge | 5912 | #define ATOM_S7_DOS_MODE_NUMBERw1 0x0FFFF |
5913 | |||
5914 | #define ATOM_S7_DOS_8BIT_DAC_EN_SHIFT 8 |
||
5915 | |||
1430 | serge | 5916 | // BIOS_8_SCRATCH Definition |
1117 | serge | 5917 | #define ATOM_S8_I2C_CHANNEL_BUSY_MASK 0x00000FFFF |
6104 | serge | 5918 | #define ATOM_S8_I2C_HW_ENGINE_BUSY_MASK 0x0FFFF0000 |
1117 | serge | 5919 | |
5920 | #define ATOM_S8_I2C_CHANNEL_BUSY_SHIFT 0 |
||
5921 | #define ATOM_S8_I2C_ENGINE_BUSY_SHIFT 16 |
||
5922 | |||
1430 | serge | 5923 | // BIOS_9_SCRATCH Definition |
6104 | serge | 5924 | #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_MASK |
1117 | serge | 5925 | #define ATOM_S9_I2C_CHANNEL_COMPLETED_MASK 0x0000FFFF |
5926 | #endif |
||
6104 | serge | 5927 | #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_MASK |
1117 | serge | 5928 | #define ATOM_S9_I2C_CHANNEL_ABORTED_MASK 0xFFFF0000 |
5929 | #endif |
||
6104 | serge | 5930 | #ifndef ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT |
1117 | serge | 5931 | #define ATOM_S9_I2C_CHANNEL_COMPLETED_SHIFT 0 |
5932 | #endif |
||
6104 | serge | 5933 | #ifndef ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT |
1117 | serge | 5934 | #define ATOM_S9_I2C_CHANNEL_ABORTED_SHIFT 16 |
5935 | #endif |
||
5936 | |||
1430 | serge | 5937 | |
1117 | serge | 5938 | #define ATOM_FLAG_SET 0x20 |
5939 | #define ATOM_FLAG_CLEAR 0 |
||
1430 | serge | 5940 | #define CLEAR_ATOM_S6_ACC_MODE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_ACC_MODE_SHIFT | ATOM_FLAG_CLEAR) |
5941 | #define SET_ATOM_S6_DEVICE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DEVICE_CHANGE_SHIFT | ATOM_FLAG_SET) |
||
5942 | #define SET_ATOM_S6_VRI_BRIGHTNESS_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_VRI_BRIGHTNESS_CHANGE_SHIFT | ATOM_FLAG_SET) |
||
5943 | #define SET_ATOM_S6_SCALER_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SCALER_CHANGE_SHIFT | ATOM_FLAG_SET) |
||
5944 | #define SET_ATOM_S6_LID_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_CHANGE_SHIFT | ATOM_FLAG_SET) |
||
1117 | serge | 5945 | |
1430 | serge | 5946 | #define SET_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_SET) |
5947 | #define CLEAR_ATOM_S6_LID_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_LID_STATE_SHIFT | ATOM_FLAG_CLEAR) |
||
1117 | serge | 5948 | |
1430 | serge | 5949 | #define SET_ATOM_S6_DOCK_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCKING_CHANGE_SHIFT | ATOM_FLAG_SET) |
5950 | #define SET_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_SET) |
||
5951 | #define CLEAR_ATOM_S6_DOCK_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DOCK_STATE_SHIFT | ATOM_FLAG_CLEAR) |
||
1117 | serge | 5952 | |
1430 | serge | 5953 | #define SET_ATOM_S6_THERMAL_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_THERMAL_STATE_CHANGE_SHIFT | ATOM_FLAG_SET) |
5954 | #define SET_ATOM_S6_SYSTEM_POWER_MODE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_SYSTEM_POWER_MODE_CHANGE_SHIFT | ATOM_FLAG_SET) |
||
5955 | #define SET_ATOM_S6_INTERRUPT_SET_BY_BIOS ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_INTERRUPT_SET_BY_BIOS_SHIFT | ATOM_FLAG_SET) |
||
1117 | serge | 5956 | |
1430 | serge | 5957 | #define SET_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_SET) |
5958 | #define CLEAR_ATOM_S6_CRITICAL_STATE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CRITICAL_STATE_SHIFT | ATOM_FLAG_CLEAR) |
||
1117 | serge | 5959 | |
1430 | serge | 5960 | #define SET_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_SET) |
5961 | #define CLEAR_ATOM_S6_REQ_SCALER ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_SHIFT | ATOM_FLAG_CLEAR ) |
||
1117 | serge | 5962 | |
1430 | serge | 5963 | #define SET_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_SET ) |
5964 | #define CLEAR_ATOM_S6_REQ_SCALER_ARATIO ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_REQ_SCALER_ARATIO_SHIFT | ATOM_FLAG_CLEAR ) |
||
1117 | serge | 5965 | |
1430 | serge | 5966 | #define SET_ATOM_S6_I2C_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_I2C_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) |
1117 | serge | 5967 | |
1430 | serge | 5968 | #define SET_ATOM_S6_DISPLAY_STATE_CHANGE ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_DISPLAY_STATE_CHANGE_SHIFT | ATOM_FLAG_SET ) |
1117 | serge | 5969 | |
1430 | serge | 5970 | #define SET_ATOM_S6_DEVICE_RECONFIG ((ATOM_ACC_CHANGE_INFO_DEF << 8 )|ATOM_S6_CONFIG_DISPLAY_CHANGE_SHIFT | ATOM_FLAG_SET) |
5971 | #define CLEAR_ATOM_S0_LCD1 ((ATOM_DEVICE_CONNECT_INFO_DEF << 8 )| ATOM_S0_LCD1_SHIFT | ATOM_FLAG_CLEAR ) |
||
5972 | #define SET_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_SET ) |
||
5973 | #define CLEAR_ATOM_S7_DOS_8BIT_DAC_EN ((ATOM_DOS_MODE_INFO_DEF << 8 )|ATOM_S7_DOS_8BIT_DAC_EN_SHIFT | ATOM_FLAG_CLEAR ) |
||
1117 | serge | 5974 | |
6104 | serge | 5975 | /****************************************************************************/ |
1430 | serge | 5976 | //Portion II: Definitinos only used in Driver |
1117 | serge | 5977 | /****************************************************************************/ |
5978 | |||
1430 | serge | 5979 | // Macros used by driver |
5980 | #ifdef __cplusplus |
||
5981 | #define GetIndexIntoMasterTable(MasterOrData, FieldName) ((reinterpret_cast |
||
1117 | serge | 5982 | |
1430 | serge | 5983 | #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) (((static_cast |
5984 | #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) (((static_cast |
||
5985 | #else // not __cplusplus |
||
5986 | #define GetIndexIntoMasterTable(MasterOrData, FieldName) (((char*)(&((ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*)0)->FieldName)-(char*)0)/sizeof(USHORT)) |
||
1117 | serge | 5987 | |
5988 | #define GET_COMMAND_TABLE_COMMANDSET_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevision)&0x3F) |
||
5989 | #define GET_COMMAND_TABLE_PARAMETER_REVISION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevision)&0x3F) |
||
1430 | serge | 5990 | #endif // __cplusplus |
1117 | serge | 5991 | |
5992 | #define GET_DATA_TABLE_MAJOR_REVISION GET_COMMAND_TABLE_COMMANDSET_REVISION |
||
5993 | #define GET_DATA_TABLE_MINOR_REVISION GET_COMMAND_TABLE_PARAMETER_REVISION |
||
5994 | |||
6104 | serge | 5995 | /****************************************************************************/ |
1430 | serge | 5996 | //Portion III: Definitinos only used in VBIOS |
1117 | serge | 5997 | /****************************************************************************/ |
5998 | #define ATOM_DAC_SRC 0x80 |
||
5999 | #define ATOM_SRC_DAC1 0 |
||
6000 | #define ATOM_SRC_DAC2 0x80 |
||
6001 | |||
1430 | serge | 6002 | typedef struct _MEMORY_PLLINIT_PARAMETERS |
6003 | { |
||
6004 | ULONG ulTargetMemoryClock; //In 10Khz unit |
||
6005 | UCHAR ucAction; //not define yet |
||
6006 | UCHAR ucFbDiv_Hi; //Fbdiv Hi byte |
||
6007 | UCHAR ucFbDiv; //FB value |
||
6008 | UCHAR ucPostDiv; //Post div |
||
6009 | }MEMORY_PLLINIT_PARAMETERS; |
||
1117 | serge | 6010 | |
6011 | #define MEMORY_PLLINIT_PS_ALLOCATION MEMORY_PLLINIT_PARAMETERS |
||
6012 | |||
1430 | serge | 6013 | |
6104 | serge | 6014 | #define GPIO_PIN_WRITE 0x01 |
1117 | serge | 6015 | #define GPIO_PIN_READ 0x00 |
6016 | |||
1430 | serge | 6017 | typedef struct _GPIO_PIN_CONTROL_PARAMETERS |
6018 | { |
||
6019 | UCHAR ucGPIO_ID; //return value, read from GPIO pins |
||
6020 | UCHAR ucGPIOBitShift; //define which bit in uGPIOBitVal need to be update |
||
6021 | UCHAR ucGPIOBitVal; //Set/Reset corresponding bit defined in ucGPIOBitMask |
||
6022 | UCHAR ucAction; //=GPIO_PIN_WRITE: Read; =GPIO_PIN_READ: Write |
||
6023 | }GPIO_PIN_CONTROL_PARAMETERS; |
||
1117 | serge | 6024 | |
1430 | serge | 6025 | typedef struct _ENABLE_SCALER_PARAMETERS |
6026 | { |
||
6027 | UCHAR ucScaler; // ATOM_SCALER1, ATOM_SCALER2 |
||
6028 | UCHAR ucEnable; // ATOM_SCALER_DISABLE or ATOM_SCALER_CENTER or ATOM_SCALER_EXPANSION |
||
6029 | UCHAR ucTVStandard; // |
||
6104 | serge | 6030 | UCHAR ucPadding[1]; |
1430 | serge | 6031 | }ENABLE_SCALER_PARAMETERS; |
6104 | serge | 6032 | #define ENABLE_SCALER_PS_ALLOCATION ENABLE_SCALER_PARAMETERS |
1117 | serge | 6033 | |
1430 | serge | 6034 | //ucEnable: |
1117 | serge | 6035 | #define SCALER_BYPASS_AUTO_CENTER_NO_REPLICATION 0 |
6036 | #define SCALER_BYPASS_AUTO_CENTER_AUTO_REPLICATION 1 |
||
6037 | #define SCALER_ENABLE_2TAP_ALPHA_MODE 2 |
||
6038 | #define SCALER_ENABLE_MULTITAP_MODE 3 |
||
6039 | |||
1430 | serge | 6040 | typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS |
6041 | { |
||
6042 | ULONG usHWIconHorzVertPosn; // Hardware Icon Vertical position |
||
6043 | UCHAR ucHWIconVertOffset; // Hardware Icon Vertical offset |
||
6044 | UCHAR ucHWIconHorzOffset; // Hardware Icon Horizontal offset |
||
6045 | UCHAR ucSelection; // ATOM_CURSOR1 or ATOM_ICON1 or ATOM_CURSOR2 or ATOM_ICON2 |
||
6046 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6047 | }ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS; |
||
1117 | serge | 6048 | |
1430 | serge | 6049 | typedef struct _ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION |
6050 | { |
||
6104 | serge | 6051 | ENABLE_HARDWARE_ICON_CURSOR_PARAMETERS sEnableIcon; |
6052 | ENABLE_CRTC_PARAMETERS sReserved; |
||
1430 | serge | 6053 | }ENABLE_HARDWARE_ICON_CURSOR_PS_ALLOCATION; |
1117 | serge | 6054 | |
1430 | serge | 6055 | typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS |
6056 | { |
||
6057 | USHORT usHight; // Image Hight |
||
6058 | USHORT usWidth; // Image Width |
||
6059 | UCHAR ucSurface; // Surface 1 or 2 |
||
6104 | serge | 6060 | UCHAR ucPadding[3]; |
1430 | serge | 6061 | }ENABLE_GRAPH_SURFACE_PARAMETERS; |
1117 | serge | 6062 | |
1430 | serge | 6063 | typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2 |
6064 | { |
||
6065 | USHORT usHight; // Image Hight |
||
6066 | USHORT usWidth; // Image Width |
||
6067 | UCHAR ucSurface; // Surface 1 or 2 |
||
6068 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6104 | serge | 6069 | UCHAR ucPadding[2]; |
1430 | serge | 6070 | }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_2; |
1117 | serge | 6071 | |
1430 | serge | 6072 | typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3 |
6073 | { |
||
6074 | USHORT usHight; // Image Hight |
||
6075 | USHORT usWidth; // Image Width |
||
6076 | UCHAR ucSurface; // Surface 1 or 2 |
||
6077 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6078 | USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0. |
||
6079 | }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3; |
||
6080 | |||
2997 | Serge | 6081 | typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4 |
6082 | { |
||
6083 | USHORT usHight; // Image Hight |
||
6084 | USHORT usWidth; // Image Width |
||
6085 | USHORT usGraphPitch; |
||
6086 | UCHAR ucColorDepth; |
||
6087 | UCHAR ucPixelFormat; |
||
6088 | UCHAR ucSurface; // Surface 1 or 2 |
||
6089 | UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE |
||
6090 | UCHAR ucModeType; |
||
6091 | UCHAR ucReserved; |
||
6092 | }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4; |
||
6093 | |||
6094 | // ucEnable |
||
6095 | #define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f |
||
6096 | #define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10 |
||
6097 | |||
1430 | serge | 6098 | typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION |
6099 | { |
||
6104 | serge | 6100 | ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface; |
1430 | serge | 6101 | ENABLE_YUV_PS_ALLOCATION sReserved; // Don't set this one |
6102 | }ENABLE_GRAPH_SURFACE_PS_ALLOCATION; |
||
1117 | serge | 6103 | |
1430 | serge | 6104 | typedef struct _MEMORY_CLEAN_UP_PARAMETERS |
6105 | { |
||
1963 | serge | 6106 | USHORT usMemoryStart; //in 8Kb boundary, offset from memory base address |
1430 | serge | 6107 | USHORT usMemorySize; //8Kb blocks aligned |
6108 | }MEMORY_CLEAN_UP_PARAMETERS; |
||
1117 | serge | 6109 | #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS |
6110 | |||
1430 | serge | 6111 | typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS |
6112 | { |
||
6113 | USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC |
||
6104 | serge | 6114 | USHORT usY_Size; |
1430 | serge | 6115 | }GET_DISPLAY_SURFACE_SIZE_PARAMETERS; |
1117 | serge | 6116 | |
2997 | Serge | 6117 | typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2 |
6118 | { |
||
6119 | union{ |
||
6120 | USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC |
||
6121 | USHORT usSurface; |
||
6122 | }; |
||
6123 | USHORT usY_Size; |
||
6124 | USHORT usDispXStart; |
||
6125 | USHORT usDispYStart; |
||
6126 | }GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; |
||
6127 | |||
6128 | |||
6129 | typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 |
||
6130 | { |
||
6131 | UCHAR ucLutId; |
||
6132 | UCHAR ucAction; |
||
6133 | USHORT usLutStartIndex; |
||
6134 | USHORT usLutLength; |
||
6135 | USHORT usLutOffsetInVram; |
||
6136 | }PALETTE_DATA_CONTROL_PARAMETERS_V3; |
||
6137 | |||
6138 | // ucAction: |
||
6139 | #define PALETTE_DATA_AUTO_FILL 1 |
||
6140 | #define PALETTE_DATA_READ 2 |
||
6141 | #define PALETTE_DATA_WRITE 3 |
||
6142 | |||
6143 | |||
6144 | typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2 |
||
6145 | { |
||
6146 | UCHAR ucInterruptId; |
||
6147 | UCHAR ucServiceId; |
||
6148 | UCHAR ucStatus; |
||
6149 | UCHAR ucReserved; |
||
6150 | }INTERRUPT_SERVICE_PARAMETER_V2; |
||
6151 | |||
6152 | // ucInterruptId |
||
6153 | #define HDP1_INTERRUPT_ID 1 |
||
6154 | #define HDP2_INTERRUPT_ID 2 |
||
6155 | #define HDP3_INTERRUPT_ID 3 |
||
6156 | #define HDP4_INTERRUPT_ID 4 |
||
6157 | #define HDP5_INTERRUPT_ID 5 |
||
6158 | #define HDP6_INTERRUPT_ID 6 |
||
6159 | #define SW_INTERRUPT_ID 11 |
||
6160 | |||
6161 | // ucAction |
||
6162 | #define INTERRUPT_SERVICE_GEN_SW_INT 1 |
||
6163 | #define INTERRUPT_SERVICE_GET_STATUS 2 |
||
6164 | |||
6165 | // ucStatus |
||
6166 | #define INTERRUPT_STATUS__INT_TRIGGER 1 |
||
6167 | #define INTERRUPT_STATUS__HPD_HIGH 2 |
||
6168 | |||
1430 | serge | 6169 | typedef struct _INDIRECT_IO_ACCESS |
6170 | { |
||
6104 | serge | 6171 | ATOM_COMMON_TABLE_HEADER sHeader; |
6172 | UCHAR IOAccessSequence[256]; |
||
1117 | serge | 6173 | } INDIRECT_IO_ACCESS; |
6174 | |||
6175 | #define INDIRECT_READ 0x00 |
||
6176 | #define INDIRECT_WRITE 0x80 |
||
6177 | |||
6178 | #define INDIRECT_IO_MM 0 |
||
6179 | #define INDIRECT_IO_PLL 1 |
||
6180 | #define INDIRECT_IO_MC 2 |
||
6181 | #define INDIRECT_IO_PCIE 3 |
||
6182 | #define INDIRECT_IO_PCIEP 4 |
||
6183 | #define INDIRECT_IO_NBMISC 5 |
||
5078 | serge | 6184 | #define INDIRECT_IO_SMU 5 |
1117 | serge | 6185 | |
6186 | #define INDIRECT_IO_PLL_READ INDIRECT_IO_PLL | INDIRECT_READ |
||
6187 | #define INDIRECT_IO_PLL_WRITE INDIRECT_IO_PLL | INDIRECT_WRITE |
||
6188 | #define INDIRECT_IO_MC_READ INDIRECT_IO_MC | INDIRECT_READ |
||
6189 | #define INDIRECT_IO_MC_WRITE INDIRECT_IO_MC | INDIRECT_WRITE |
||
6190 | #define INDIRECT_IO_PCIE_READ INDIRECT_IO_PCIE | INDIRECT_READ |
||
6191 | #define INDIRECT_IO_PCIE_WRITE INDIRECT_IO_PCIE | INDIRECT_WRITE |
||
6192 | #define INDIRECT_IO_PCIEP_READ INDIRECT_IO_PCIEP | INDIRECT_READ |
||
6193 | #define INDIRECT_IO_PCIEP_WRITE INDIRECT_IO_PCIEP | INDIRECT_WRITE |
||
6194 | #define INDIRECT_IO_NBMISC_READ INDIRECT_IO_NBMISC | INDIRECT_READ |
||
6195 | #define INDIRECT_IO_NBMISC_WRITE INDIRECT_IO_NBMISC | INDIRECT_WRITE |
||
5078 | serge | 6196 | #define INDIRECT_IO_SMU_READ INDIRECT_IO_SMU | INDIRECT_READ |
6197 | #define INDIRECT_IO_SMU_WRITE INDIRECT_IO_SMU | INDIRECT_WRITE |
||
1117 | serge | 6198 | |
1430 | serge | 6199 | typedef struct _ATOM_OEM_INFO |
6200 | { |
||
6104 | serge | 6201 | ATOM_COMMON_TABLE_HEADER sHeader; |
6202 | ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; |
||
1430 | serge | 6203 | }ATOM_OEM_INFO; |
1117 | serge | 6204 | |
1430 | serge | 6205 | typedef struct _ATOM_TV_MODE |
6206 | { |
||
6207 | UCHAR ucVMode_Num; //Video mode number |
||
6208 | UCHAR ucTV_Mode_Num; //Internal TV mode number |
||
6209 | }ATOM_TV_MODE; |
||
1117 | serge | 6210 | |
1430 | serge | 6211 | typedef struct _ATOM_BIOS_INT_TVSTD_MODE |
6212 | { |
||
6213 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
6214 | USHORT usTV_Mode_LUT_Offset; // Pointer to standard to internal number conversion table |
||
6215 | USHORT usTV_FIFO_Offset; // Pointer to FIFO entry table |
||
6216 | USHORT usNTSC_Tbl_Offset; // Pointer to SDTV_Mode_NTSC table |
||
6217 | USHORT usPAL_Tbl_Offset; // Pointer to SDTV_Mode_PAL table |
||
6218 | USHORT usCV_Tbl_Offset; // Pointer to SDTV_Mode_PAL table |
||
6219 | }ATOM_BIOS_INT_TVSTD_MODE; |
||
1117 | serge | 6220 | |
1430 | serge | 6221 | |
6222 | typedef struct _ATOM_TV_MODE_SCALER_PTR |
||
6223 | { |
||
6224 | USHORT ucFilter0_Offset; //Pointer to filter format 0 coefficients |
||
6225 | USHORT usFilter1_Offset; //Pointer to filter format 0 coefficients |
||
6104 | serge | 6226 | UCHAR ucTV_Mode_Num; |
1430 | serge | 6227 | }ATOM_TV_MODE_SCALER_PTR; |
1117 | serge | 6228 | |
1430 | serge | 6229 | typedef struct _ATOM_STANDARD_VESA_TIMING |
6230 | { |
||
6104 | serge | 6231 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 6232 | ATOM_DTD_FORMAT aModeTimings[16]; // 16 is not the real array number, just for initial allocation |
6233 | }ATOM_STANDARD_VESA_TIMING; |
||
1117 | serge | 6234 | |
1430 | serge | 6235 | |
6236 | typedef struct _ATOM_STD_FORMAT |
||
6237 | { |
||
6104 | serge | 6238 | USHORT usSTD_HDisp; |
6239 | USHORT usSTD_VDisp; |
||
6240 | USHORT usSTD_RefreshRate; |
||
6241 | USHORT usReserved; |
||
1430 | serge | 6242 | }ATOM_STD_FORMAT; |
1117 | serge | 6243 | |
1430 | serge | 6244 | typedef struct _ATOM_VESA_TO_EXTENDED_MODE |
6245 | { |
||
6104 | serge | 6246 | USHORT usVESA_ModeNumber; |
6247 | USHORT usExtendedModeNumber; |
||
1430 | serge | 6248 | }ATOM_VESA_TO_EXTENDED_MODE; |
1117 | serge | 6249 | |
1430 | serge | 6250 | typedef struct _ATOM_VESA_TO_INTENAL_MODE_LUT |
6251 | { |
||
6104 | serge | 6252 | ATOM_COMMON_TABLE_HEADER sHeader; |
6253 | ATOM_VESA_TO_EXTENDED_MODE asVESA_ToExtendedModeInfo[76]; |
||
1430 | serge | 6254 | }ATOM_VESA_TO_INTENAL_MODE_LUT; |
1117 | serge | 6255 | |
6256 | /*************** ATOM Memory Related Data Structure ***********************/ |
||
1430 | serge | 6257 | typedef struct _ATOM_MEMORY_VENDOR_BLOCK{ |
6104 | serge | 6258 | UCHAR ucMemoryType; |
6259 | UCHAR ucMemoryVendor; |
||
6260 | UCHAR ucAdjMCId; |
||
6261 | UCHAR ucDynClkId; |
||
6262 | ULONG ulDllResetClkRange; |
||
1430 | serge | 6263 | }ATOM_MEMORY_VENDOR_BLOCK; |
1117 | serge | 6264 | |
1430 | serge | 6265 | |
6266 | typedef struct _ATOM_MEMORY_SETTING_ID_CONFIG{ |
||
1117 | serge | 6267 | #if ATOM_BIG_ENDIAN |
6104 | serge | 6268 | ULONG ucMemBlkId:8; |
6269 | ULONG ulMemClockRange:24; |
||
1117 | serge | 6270 | #else |
6104 | serge | 6271 | ULONG ulMemClockRange:24; |
6272 | ULONG ucMemBlkId:8; |
||
1117 | serge | 6273 | #endif |
1430 | serge | 6274 | }ATOM_MEMORY_SETTING_ID_CONFIG; |
1117 | serge | 6275 | |
1430 | serge | 6276 | typedef union _ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS |
6277 | { |
||
6104 | serge | 6278 | ATOM_MEMORY_SETTING_ID_CONFIG slAccess; |
6279 | ULONG ulAccess; |
||
1430 | serge | 6280 | }ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS; |
1117 | serge | 6281 | |
1430 | serge | 6282 | |
6283 | typedef struct _ATOM_MEMORY_SETTING_DATA_BLOCK{ |
||
6104 | serge | 6284 | ATOM_MEMORY_SETTING_ID_CONFIG_ACCESS ulMemoryID; |
6285 | ULONG aulMemData[1]; |
||
1430 | serge | 6286 | }ATOM_MEMORY_SETTING_DATA_BLOCK; |
1117 | serge | 6287 | |
6288 | |||
1430 | serge | 6289 | typedef struct _ATOM_INIT_REG_INDEX_FORMAT{ |
6290 | USHORT usRegIndex; // MC register index |
||
6291 | UCHAR ucPreRegDataLength; // offset in ATOM_INIT_REG_DATA_BLOCK.saRegDataBuf |
||
6292 | }ATOM_INIT_REG_INDEX_FORMAT; |
||
6293 | |||
6294 | |||
6295 | typedef struct _ATOM_INIT_REG_BLOCK{ |
||
6296 | USHORT usRegIndexTblSize; //size of asRegIndexBuf |
||
6297 | USHORT usRegDataBlkSize; //size of ATOM_MEMORY_SETTING_DATA_BLOCK |
||
6104 | serge | 6298 | ATOM_INIT_REG_INDEX_FORMAT asRegIndexBuf[1]; |
6299 | ATOM_MEMORY_SETTING_DATA_BLOCK asRegDataBuf[1]; |
||
1430 | serge | 6300 | }ATOM_INIT_REG_BLOCK; |
1117 | serge | 6301 | |
6302 | #define END_OF_REG_INDEX_BLOCK 0x0ffff |
||
6303 | #define END_OF_REG_DATA_BLOCK 0x00000000 |
||
2997 | Serge | 6304 | #define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS |
1117 | serge | 6305 | #define CLOCK_RANGE_HIGHEST 0x00ffffff |
6306 | |||
6307 | #define VALUE_DWORD SIZEOF ULONG |
||
6308 | #define VALUE_SAME_AS_ABOVE 0 |
||
6309 | #define VALUE_MASK_DWORD 0x84 |
||
6310 | |||
6311 | #define INDEX_ACCESS_RANGE_BEGIN (VALUE_DWORD + 1) |
||
6312 | #define INDEX_ACCESS_RANGE_END (INDEX_ACCESS_RANGE_BEGIN + 1) |
||
6313 | #define VALUE_INDEX_ACCESS_SINGLE (INDEX_ACCESS_RANGE_END + 1) |
||
1963 | serge | 6314 | //#define ACCESS_MCIODEBUGIND 0x40 //defined in BIOS code |
6315 | #define ACCESS_PLACEHOLDER 0x80 |
||
1117 | serge | 6316 | |
1430 | serge | 6317 | typedef struct _ATOM_MC_INIT_PARAM_TABLE |
6318 | { |
||
6104 | serge | 6319 | ATOM_COMMON_TABLE_HEADER sHeader; |
6320 | USHORT usAdjustARB_SEQDataOffset; |
||
6321 | USHORT usMCInitMemTypeTblOffset; |
||
6322 | USHORT usMCInitCommonTblOffset; |
||
6323 | USHORT usMCInitPowerDownTblOffset; |
||
6324 | ULONG ulARB_SEQDataBuf[32]; |
||
6325 | ATOM_INIT_REG_BLOCK asMCInitMemType; |
||
6326 | ATOM_INIT_REG_BLOCK asMCInitCommon; |
||
1430 | serge | 6327 | }ATOM_MC_INIT_PARAM_TABLE; |
1117 | serge | 6328 | |
1430 | serge | 6329 | |
1117 | serge | 6330 | #define _4Mx16 0x2 |
6331 | #define _4Mx32 0x3 |
||
6332 | #define _8Mx16 0x12 |
||
6333 | #define _8Mx32 0x13 |
||
6334 | #define _16Mx16 0x22 |
||
6335 | #define _16Mx32 0x23 |
||
6336 | #define _32Mx16 0x32 |
||
6337 | #define _32Mx32 0x33 |
||
6338 | #define _64Mx8 0x41 |
||
6339 | #define _64Mx16 0x42 |
||
1963 | serge | 6340 | #define _64Mx32 0x43 |
6341 | #define _128Mx8 0x51 |
||
6342 | #define _128Mx16 0x52 |
||
5078 | serge | 6343 | #define _128Mx32 0x53 |
1963 | serge | 6344 | #define _256Mx8 0x61 |
2997 | Serge | 6345 | #define _256Mx16 0x62 |
5078 | serge | 6346 | #define _512Mx8 0x71 |
1117 | serge | 6347 | |
6348 | #define SAMSUNG 0x1 |
||
6349 | #define INFINEON 0x2 |
||
6350 | #define ELPIDA 0x3 |
||
6351 | #define ETRON 0x4 |
||
6352 | #define NANYA 0x5 |
||
6353 | #define HYNIX 0x6 |
||
6354 | #define MOSEL 0x7 |
||
6355 | #define WINBOND 0x8 |
||
6356 | #define ESMT 0x9 |
||
6357 | #define MICRON 0xF |
||
6358 | |||
6359 | #define QIMONDA INFINEON |
||
6360 | #define PROMOS MOSEL |
||
1430 | serge | 6361 | #define KRETON INFINEON |
1963 | serge | 6362 | #define ELIXIR NANYA |
5078 | serge | 6363 | #define MEZZA ELPIDA |
1117 | serge | 6364 | |
5078 | serge | 6365 | |
1430 | serge | 6366 | /////////////Support for GDDR5 MC uCode to reside in upper 64K of ROM///////////// |
1117 | serge | 6367 | |
1963 | serge | 6368 | #define UCODE_ROM_START_ADDRESS 0x1b800 |
1430 | serge | 6369 | #define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode |
1117 | serge | 6370 | |
1430 | serge | 6371 | //uCode block header for reference |
1117 | serge | 6372 | |
1430 | serge | 6373 | typedef struct _MCuCodeHeader |
6374 | { |
||
6104 | serge | 6375 | ULONG ulSignature; |
6376 | UCHAR ucRevision; |
||
6377 | UCHAR ucChecksum; |
||
6378 | UCHAR ucReserved1; |
||
6379 | UCHAR ucReserved2; |
||
6380 | USHORT usParametersLength; |
||
6381 | USHORT usUCodeLength; |
||
6382 | USHORT usReserved1; |
||
6383 | USHORT usReserved2; |
||
1117 | serge | 6384 | } MCuCodeHeader; |
6385 | |||
1430 | serge | 6386 | ////////////////////////////////////////////////////////////////////////////////// |
1117 | serge | 6387 | |
6388 | #define ATOM_MAX_NUMBER_OF_VRAM_MODULE 16 |
||
6389 | |||
6390 | #define ATOM_VRAM_MODULE_MEMORY_VENDOR_ID_MASK 0xF |
||
1430 | serge | 6391 | typedef struct _ATOM_VRAM_MODULE_V1 |
6392 | { |
||
6104 | serge | 6393 | ULONG ulReserved; |
6394 | USHORT usEMRSValue; |
||
6395 | USHORT usMRSValue; |
||
6396 | USHORT usReserved; |
||
1430 | serge | 6397 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
6398 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] reserved; |
||
6399 | UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender |
||
6400 | UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... |
||
6401 | UCHAR ucRow; // Number of Row,in power of 2; |
||
6402 | UCHAR ucColumn; // Number of Column,in power of 2; |
||
6403 | UCHAR ucBank; // Nunber of Bank; |
||
6404 | UCHAR ucRank; // Number of Rank, in power of 2 |
||
6405 | UCHAR ucChannelNum; // Number of channel; |
||
6406 | UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 |
||
6407 | UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; |
||
6408 | UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; |
||
6104 | serge | 6409 | UCHAR ucReserved[2]; |
1430 | serge | 6410 | }ATOM_VRAM_MODULE_V1; |
1117 | serge | 6411 | |
1430 | serge | 6412 | |
6413 | typedef struct _ATOM_VRAM_MODULE_V2 |
||
6414 | { |
||
6104 | serge | 6415 | ULONG ulReserved; |
1430 | serge | 6416 | ULONG ulFlags; // To enable/disable functionalities based on memory type |
6417 | ULONG ulEngineClock; // Override of default engine clock for particular memory type |
||
6418 | ULONG ulMemoryClock; // Override of default memory clock for particular memory type |
||
6419 | USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type |
||
6420 | USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type |
||
6104 | serge | 6421 | USHORT usEMRSValue; |
6422 | USHORT usMRSValue; |
||
6423 | USHORT usReserved; |
||
1430 | serge | 6424 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
6425 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; |
||
6426 | UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed |
||
6427 | UCHAR ucMemoryDeviceCfg; // [7:4]=0x0:4M;=0x1:8M;=0x2:16M;0x3:32M....[3:0]=0x0:x4;=0x1:x8;=0x2:x16;=0x3:x32... |
||
6428 | UCHAR ucRow; // Number of Row,in power of 2; |
||
6429 | UCHAR ucColumn; // Number of Column,in power of 2; |
||
6430 | UCHAR ucBank; // Nunber of Bank; |
||
6431 | UCHAR ucRank; // Number of Rank, in power of 2 |
||
6432 | UCHAR ucChannelNum; // Number of channel; |
||
6433 | UCHAR ucChannelConfig; // [3:0]=Indication of what channel combination;[4:7]=Channel bit width, in number of 2 |
||
6434 | UCHAR ucDefaultMVDDQ_ID; // Default MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data; |
||
6435 | UCHAR ucDefaultMVDDC_ID; // Default MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data; |
||
6104 | serge | 6436 | UCHAR ucRefreshRateFactor; |
6437 | UCHAR ucReserved[3]; |
||
1430 | serge | 6438 | }ATOM_VRAM_MODULE_V2; |
1117 | serge | 6439 | |
1430 | serge | 6440 | |
6441 | typedef struct _ATOM_MEMORY_TIMING_FORMAT |
||
6442 | { |
||
6443 | ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing |
||
6444 | union{ |
||
6445 | USHORT usMRS; // mode register |
||
6104 | serge | 6446 | USHORT usDDR3_MR0; |
6447 | }; |
||
1430 | serge | 6448 | union{ |
6449 | USHORT usEMRS; // extended mode register |
||
6104 | serge | 6450 | USHORT usDDR3_MR1; |
6451 | }; |
||
1430 | serge | 6452 | UCHAR ucCL; // CAS latency |
6453 | UCHAR ucWL; // WRITE Latency |
||
6454 | UCHAR uctRAS; // tRAS |
||
6455 | UCHAR uctRC; // tRC |
||
6456 | UCHAR uctRFC; // tRFC |
||
6457 | UCHAR uctRCDR; // tRCDR |
||
6458 | UCHAR uctRCDW; // tRCDW |
||
6459 | UCHAR uctRP; // tRP |
||
6460 | UCHAR uctRRD; // tRRD |
||
6461 | UCHAR uctWR; // tWR |
||
6462 | UCHAR uctWTR; // tWTR |
||
6463 | UCHAR uctPDIX; // tPDIX |
||
6464 | UCHAR uctFAW; // tFAW |
||
6465 | UCHAR uctAOND; // tAOND |
||
6466 | union |
||
6467 | { |
||
6104 | serge | 6468 | struct { |
1430 | serge | 6469 | UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon |
6104 | serge | 6470 | UCHAR ucReserved; |
6471 | }; |
||
6472 | USHORT usDDR3_MR2; |
||
6473 | }; |
||
1430 | serge | 6474 | }ATOM_MEMORY_TIMING_FORMAT; |
1117 | serge | 6475 | |
1430 | serge | 6476 | |
6477 | typedef struct _ATOM_MEMORY_TIMING_FORMAT_V1 |
||
6478 | { |
||
6479 | ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing |
||
6480 | USHORT usMRS; // mode register |
||
6481 | USHORT usEMRS; // extended mode register |
||
6482 | UCHAR ucCL; // CAS latency |
||
6483 | UCHAR ucWL; // WRITE Latency |
||
6484 | UCHAR uctRAS; // tRAS |
||
6485 | UCHAR uctRC; // tRC |
||
6486 | UCHAR uctRFC; // tRFC |
||
6487 | UCHAR uctRCDR; // tRCDR |
||
6488 | UCHAR uctRCDW; // tRCDW |
||
6489 | UCHAR uctRP; // tRP |
||
6490 | UCHAR uctRRD; // tRRD |
||
6491 | UCHAR uctWR; // tWR |
||
6492 | UCHAR uctWTR; // tWTR |
||
6493 | UCHAR uctPDIX; // tPDIX |
||
6494 | UCHAR uctFAW; // tFAW |
||
6495 | UCHAR uctAOND; // tAOND |
||
6496 | UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon |
||
6497 | ////////////////////////////////////GDDR parameters/////////////////////////////////// |
||
6498 | UCHAR uctCCDL; // |
||
6499 | UCHAR uctCRCRL; // |
||
6500 | UCHAR uctCRCWL; // |
||
6501 | UCHAR uctCKE; // |
||
6502 | UCHAR uctCKRSE; // |
||
6503 | UCHAR uctCKRSX; // |
||
6504 | UCHAR uctFAW32; // |
||
6505 | UCHAR ucMR5lo; // |
||
6506 | UCHAR ucMR5hi; // |
||
6507 | UCHAR ucTerminator; |
||
6508 | }ATOM_MEMORY_TIMING_FORMAT_V1; |
||
6509 | |||
6510 | typedef struct _ATOM_MEMORY_TIMING_FORMAT_V2 |
||
6511 | { |
||
6512 | ULONG ulClkRange; // memory clock in 10kHz unit, when target memory clock is below this clock, use this memory timing |
||
6513 | USHORT usMRS; // mode register |
||
6514 | USHORT usEMRS; // extended mode register |
||
6515 | UCHAR ucCL; // CAS latency |
||
6516 | UCHAR ucWL; // WRITE Latency |
||
6517 | UCHAR uctRAS; // tRAS |
||
6518 | UCHAR uctRC; // tRC |
||
6519 | UCHAR uctRFC; // tRFC |
||
6520 | UCHAR uctRCDR; // tRCDR |
||
6521 | UCHAR uctRCDW; // tRCDW |
||
6522 | UCHAR uctRP; // tRP |
||
6523 | UCHAR uctRRD; // tRRD |
||
6524 | UCHAR uctWR; // tWR |
||
6525 | UCHAR uctWTR; // tWTR |
||
6526 | UCHAR uctPDIX; // tPDIX |
||
6527 | UCHAR uctFAW; // tFAW |
||
6528 | UCHAR uctAOND; // tAOND |
||
6529 | UCHAR ucflag; // flag to control memory timing calculation. bit0= control EMRS2 Infineon |
||
6530 | ////////////////////////////////////GDDR parameters/////////////////////////////////// |
||
6531 | UCHAR uctCCDL; // |
||
6532 | UCHAR uctCRCRL; // |
||
6533 | UCHAR uctCRCWL; // |
||
6534 | UCHAR uctCKE; // |
||
6535 | UCHAR uctCKRSE; // |
||
6536 | UCHAR uctCKRSX; // |
||
6537 | UCHAR uctFAW32; // |
||
6538 | UCHAR ucMR4lo; // |
||
6539 | UCHAR ucMR4hi; // |
||
6540 | UCHAR ucMR5lo; // |
||
6541 | UCHAR ucMR5hi; // |
||
6104 | serge | 6542 | UCHAR ucTerminator; |
1430 | serge | 6543 | UCHAR ucReserved; |
6544 | }ATOM_MEMORY_TIMING_FORMAT_V2; |
||
1117 | serge | 6545 | |
1430 | serge | 6546 | typedef struct _ATOM_MEMORY_FORMAT |
6547 | { |
||
6548 | ULONG ulDllDisClock; // memory DLL will be disable when target memory clock is below this clock |
||
6549 | union{ |
||
6550 | USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type |
||
6551 | USHORT usDDR3_Reserved; // Not used for DDR3 memory |
||
6104 | serge | 6552 | }; |
1430 | serge | 6553 | union{ |
6554 | USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type |
||
6555 | USHORT usDDR3_MR3; // Used for DDR3 memory |
||
6104 | serge | 6556 | }; |
1430 | serge | 6557 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for now; |
6558 | UCHAR ucMemoryVenderID; // Predefined,never change across designs or memory type/vender. If not predefined, vendor detection table gets executed |
||
6559 | UCHAR ucRow; // Number of Row,in power of 2; |
||
6560 | UCHAR ucColumn; // Number of Column,in power of 2; |
||
6561 | UCHAR ucBank; // Nunber of Bank; |
||
6562 | UCHAR ucRank; // Number of Rank, in power of 2 |
||
6563 | UCHAR ucBurstSize; // burst size, 0= burst size=4 1= burst size=8 |
||
6564 | UCHAR ucDllDisBit; // position of DLL Enable/Disable bit in EMRS ( Extended Mode Register ) |
||
6565 | UCHAR ucRefreshRateFactor; // memory refresh rate in unit of ms |
||
6566 | UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
||
6567 | UCHAR ucPreamble; //[7:4] Write Preamble, [3:0] Read Preamble |
||
6568 | UCHAR ucMemAttrib; // Memory Device Addribute, like RDBI/WDBI etc |
||
6569 | ATOM_MEMORY_TIMING_FORMAT asMemTiming[5]; //Memory Timing block sort from lower clock to higher clock |
||
6570 | }ATOM_MEMORY_FORMAT; |
||
1117 | serge | 6571 | |
6572 | |||
1430 | serge | 6573 | typedef struct _ATOM_VRAM_MODULE_V3 |
6574 | { |
||
6575 | ULONG ulChannelMapCfg; // board dependent paramenter:Channel combination |
||
6576 | USHORT usSize; // size of ATOM_VRAM_MODULE_V3 |
||
6577 | USHORT usDefaultMVDDQ; // board dependent parameter:Default Memory Core Voltage |
||
6578 | USHORT usDefaultMVDDC; // board dependent parameter:Default Memory IO Voltage |
||
6579 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
||
6580 | UCHAR ucChannelNum; // board dependent parameter:Number of channel; |
||
6581 | UCHAR ucChannelSize; // board dependent parameter:32bit or 64bit |
||
6582 | UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv |
||
6583 | UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters |
||
6584 | UCHAR ucFlag; // To enable/disable functionalities based on memory type |
||
6585 | ATOM_MEMORY_FORMAT asMemory; // describ all of video memory parameters from memory spec |
||
6586 | }ATOM_VRAM_MODULE_V3; |
||
6587 | |||
6588 | |||
6589 | //ATOM_VRAM_MODULE_V3.ucNPL_RT |
||
1117 | serge | 6590 | #define NPL_RT_MASK 0x0f |
6591 | #define BATTERY_ODT_MASK 0xc0 |
||
6592 | |||
6593 | #define ATOM_VRAM_MODULE ATOM_VRAM_MODULE_V3 |
||
6594 | |||
1430 | serge | 6595 | typedef struct _ATOM_VRAM_MODULE_V4 |
6596 | { |
||
6597 | ULONG ulChannelMapCfg; // board dependent parameter: Channel combination |
||
6598 | USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE |
||
6599 | USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6600 | // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) |
||
6104 | serge | 6601 | USHORT usReserved; |
1430 | serge | 6602 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
6603 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; |
||
6604 | UCHAR ucChannelNum; // Number of channels present in this module config |
||
6605 | UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits |
||
6606 | UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
||
6607 | UCHAR ucFlag; // To enable/disable functionalities based on memory type |
||
6608 | UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 |
||
6609 | UCHAR ucVREFI; // board dependent parameter |
||
6610 | UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters |
||
6611 | UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble |
||
6612 | UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6613 | // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros |
||
6104 | serge | 6614 | UCHAR ucReserved[3]; |
1117 | serge | 6615 | |
1430 | serge | 6616 | //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level |
6617 | union{ |
||
6618 | USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type |
||
6104 | serge | 6619 | USHORT usDDR3_Reserved; |
6620 | }; |
||
1430 | serge | 6621 | union{ |
6622 | USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type |
||
6623 | USHORT usDDR3_MR3; // Used for DDR3 memory |
||
6104 | serge | 6624 | }; |
1430 | serge | 6625 | UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed |
6626 | UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) |
||
6104 | serge | 6627 | UCHAR ucReserved2[2]; |
1430 | serge | 6628 | ATOM_MEMORY_TIMING_FORMAT asMemTiming[5];//Memory Timing block sort from lower clock to higher clock |
6629 | }ATOM_VRAM_MODULE_V4; |
||
1117 | serge | 6630 | |
6631 | #define VRAM_MODULE_V4_MISC_RANK_MASK 0x3 |
||
6632 | #define VRAM_MODULE_V4_MISC_DUAL_RANK 0x1 |
||
6633 | #define VRAM_MODULE_V4_MISC_BL_MASK 0x4 |
||
6634 | #define VRAM_MODULE_V4_MISC_BL8 0x4 |
||
6635 | #define VRAM_MODULE_V4_MISC_DUAL_CS 0x10 |
||
6636 | |||
1430 | serge | 6637 | typedef struct _ATOM_VRAM_MODULE_V5 |
6638 | { |
||
6639 | ULONG ulChannelMapCfg; // board dependent parameter: Channel combination |
||
6640 | USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE |
||
6641 | USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6642 | // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) |
||
6643 | USHORT usReserved; |
||
6644 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
||
6645 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; |
||
6646 | UCHAR ucChannelNum; // Number of channels present in this module config |
||
6647 | UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits |
||
6648 | UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
||
6649 | UCHAR ucFlag; // To enable/disable functionalities based on memory type |
||
6650 | UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 |
||
6651 | UCHAR ucVREFI; // board dependent parameter |
||
6652 | UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters |
||
6653 | UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble |
||
6654 | UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6655 | // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros |
||
6656 | UCHAR ucReserved[3]; |
||
6657 | |||
6658 | //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level |
||
6659 | USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type |
||
6660 | USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type |
||
6661 | UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed |
||
6662 | UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) |
||
6663 | UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth |
||
6664 | UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth |
||
6665 | ATOM_MEMORY_TIMING_FORMAT_V1 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock |
||
6666 | }ATOM_VRAM_MODULE_V5; |
||
6667 | |||
6668 | typedef struct _ATOM_VRAM_MODULE_V6 |
||
6669 | { |
||
6670 | ULONG ulChannelMapCfg; // board dependent parameter: Channel combination |
||
6671 | USHORT usModuleSize; // size of ATOM_VRAM_MODULE_V4, make it easy for VBIOS to look for next entry of VRAM_MODULE |
||
6672 | USHORT usPrivateReserved; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6673 | // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) |
||
6104 | serge | 6674 | USHORT usReserved; |
1430 | serge | 6675 | UCHAR ucExtMemoryID; // An external indicator (by hardcode, callback or pin) to tell what is the current memory module |
6676 | UCHAR ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now; |
||
6677 | UCHAR ucChannelNum; // Number of channels present in this module config |
||
6678 | UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits |
||
6679 | UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
||
6680 | UCHAR ucFlag; // To enable/disable functionalities based on memory type |
||
6681 | UCHAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlength 4, 1 - burstlength 8 |
||
6682 | UCHAR ucVREFI; // board dependent parameter |
||
6683 | UCHAR ucNPL_RT; // board dependent parameter:NPL round trip delay, used for calculate memory timing parameters |
||
6684 | UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble |
||
6685 | UCHAR ucMemorySize; // BIOS internal reserved space to optimize code size, updated by the compiler, shouldn't be modified manually!! |
||
6686 | // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros |
||
6104 | serge | 6687 | UCHAR ucReserved[3]; |
1117 | serge | 6688 | |
1430 | serge | 6689 | //compare with V3, we flat the struct by merging ATOM_MEMORY_FORMAT (as is) into V4 as the same level |
6690 | USHORT usEMRS2Value; // EMRS2 Value is used for GDDR2 and GDDR4 memory type |
||
6691 | USHORT usEMRS3Value; // EMRS3 Value is used for GDDR2 and GDDR4 memory type |
||
6692 | UCHAR ucMemoryVenderID; // Predefined, If not predefined, vendor detection table gets executed |
||
6693 | UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) |
||
6694 | UCHAR ucFIFODepth; // FIFO depth supposes to be detected during vendor detection, but if we dont do vendor detection we have to hardcode FIFO Depth |
||
6695 | UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth |
||
6696 | ATOM_MEMORY_TIMING_FORMAT_V2 asMemTiming[5];//Memory Timing block sort from lower clock to higher clock |
||
6697 | }ATOM_VRAM_MODULE_V6; |
||
1117 | serge | 6698 | |
1963 | serge | 6699 | typedef struct _ATOM_VRAM_MODULE_V7 |
6700 | { |
||
6701 | // Design Specific Values |
||
6702 | ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP |
||
6703 | USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7 |
||
6704 | USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) |
||
2997 | Serge | 6705 | USHORT usEnableChannels; // bit vector which indicate which channels are enabled |
1963 | serge | 6706 | UCHAR ucExtMemoryID; // Current memory module ID |
6707 | UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5 |
||
6708 | UCHAR ucChannelNum; // Number of mem. channels supported in this module |
||
6709 | UCHAR ucChannelWidth; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT |
||
6710 | UCHAR ucDensity; // _8Mx32, _16Mx32, _16Mx16, _32Mx16 |
||
6711 | UCHAR ucReserve; // Former container for Mx_FLAGS like DBI_AC_MODE_ENABLE_ASIC for GDDR4. Not used now. |
||
6712 | UCHAR ucMisc; // RANK_OF_THISMEMORY etc. |
||
6713 | UCHAR ucVREFI; // Not used. |
||
6714 | UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2. |
||
6715 | UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble |
||
6716 | UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros |
||
2997 | Serge | 6717 | USHORT usSEQSettingOffset; |
6718 | UCHAR ucReserved; |
||
1963 | serge | 6719 | // Memory Module specific values |
6720 | USHORT usEMRS2Value; // EMRS2/MR2 Value. |
||
6721 | USHORT usEMRS3Value; // EMRS3/MR3 Value. |
||
6722 | UCHAR ucMemoryVenderID; // [7:4] Revision, [3:0] Vendor code |
||
6723 | UCHAR ucRefreshRateFactor; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms) |
||
6724 | UCHAR ucFIFODepth; // FIFO depth can be detected during vendor detection, here is hardcoded per memory |
||
6725 | UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth |
||
6726 | char strMemPNString[20]; // part number end with '0'. |
||
6727 | }ATOM_VRAM_MODULE_V7; |
||
1430 | serge | 6728 | |
6729 | typedef struct _ATOM_VRAM_INFO_V2 |
||
6730 | { |
||
6104 | serge | 6731 | ATOM_COMMON_TABLE_HEADER sHeader; |
6732 | UCHAR ucNumOfVRAMModule; |
||
1430 | serge | 6733 | ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; |
6734 | }ATOM_VRAM_INFO_V2; |
||
1117 | serge | 6735 | |
1430 | serge | 6736 | typedef struct _ATOM_VRAM_INFO_V3 |
6737 | { |
||
6104 | serge | 6738 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 6739 | USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting |
6740 | USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting |
||
6104 | serge | 6741 | USHORT usRerseved; |
1430 | serge | 6742 | UCHAR aVID_PinsShift[9]; // 8 bit strap maximum+terminator |
6104 | serge | 6743 | UCHAR ucNumOfVRAMModule; |
1430 | serge | 6744 | ATOM_VRAM_MODULE aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; |
6745 | ATOM_INIT_REG_BLOCK asMemPatch; // for allocation |
||
6746 | // ATOM_INIT_REG_BLOCK aMemAdjust; |
||
6747 | }ATOM_VRAM_INFO_V3; |
||
1117 | serge | 6748 | |
6749 | #define ATOM_VRAM_INFO_LAST ATOM_VRAM_INFO_V3 |
||
6750 | |||
1430 | serge | 6751 | typedef struct _ATOM_VRAM_INFO_V4 |
6752 | { |
||
6104 | serge | 6753 | ATOM_COMMON_TABLE_HEADER sHeader; |
6754 | USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting |
||
6755 | USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting |
||
6756 | USHORT usRerseved; |
||
6757 | UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 |
||
1430 | serge | 6758 | ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] |
6104 | serge | 6759 | UCHAR ucReservde[4]; |
6760 | UCHAR ucNumOfVRAMModule; |
||
1430 | serge | 6761 | ATOM_VRAM_MODULE_V4 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; |
6762 | ATOM_INIT_REG_BLOCK asMemPatch; // for allocation |
||
6763 | // ATOM_INIT_REG_BLOCK aMemAdjust; |
||
6764 | }ATOM_VRAM_INFO_V4; |
||
1117 | serge | 6765 | |
1963 | serge | 6766 | typedef struct _ATOM_VRAM_INFO_HEADER_V2_1 |
6767 | { |
||
6768 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
6104 | serge | 6769 | USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting |
6770 | USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting |
||
2997 | Serge | 6771 | USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings |
6772 | USHORT usReserved[3]; |
||
1963 | serge | 6773 | UCHAR ucNumOfVRAMModule; // indicate number of VRAM module |
6774 | UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list |
||
6775 | UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version |
||
6776 | UCHAR ucReserved; |
||
6777 | ATOM_VRAM_MODULE_V7 aVramInfo[ATOM_MAX_NUMBER_OF_VRAM_MODULE]; // just for allocation, real number of blocks is in ucNumOfVRAMModule; |
||
6778 | }ATOM_VRAM_INFO_HEADER_V2_1; |
||
6779 | |||
6780 | |||
1430 | serge | 6781 | typedef struct _ATOM_VRAM_GPIO_DETECTION_INFO |
6782 | { |
||
6104 | serge | 6783 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 6784 | UCHAR aVID_PinsShift[9]; //8 bit strap maximum+terminator |
6785 | }ATOM_VRAM_GPIO_DETECTION_INFO; |
||
1117 | serge | 6786 | |
1430 | serge | 6787 | |
6788 | typedef struct _ATOM_MEMORY_TRAINING_INFO |
||
6789 | { |
||
6104 | serge | 6790 | ATOM_COMMON_TABLE_HEADER sHeader; |
6791 | UCHAR ucTrainingLoop; |
||
6792 | UCHAR ucReserved[3]; |
||
6793 | ATOM_INIT_REG_BLOCK asMemTrainingSetting; |
||
1430 | serge | 6794 | }ATOM_MEMORY_TRAINING_INFO; |
1117 | serge | 6795 | |
1430 | serge | 6796 | |
6797 | typedef struct SW_I2C_CNTL_DATA_PARAMETERS |
||
6798 | { |
||
6104 | serge | 6799 | UCHAR ucControl; |
6800 | UCHAR ucData; |
||
6801 | UCHAR ucSatus; |
||
6802 | UCHAR ucTemp; |
||
1117 | serge | 6803 | } SW_I2C_CNTL_DATA_PARAMETERS; |
6804 | |||
6805 | #define SW_I2C_CNTL_DATA_PS_ALLOCATION SW_I2C_CNTL_DATA_PARAMETERS |
||
6806 | |||
1430 | serge | 6807 | typedef struct _SW_I2C_IO_DATA_PARAMETERS |
6808 | { |
||
6104 | serge | 6809 | USHORT GPIO_Info; |
6810 | UCHAR ucAct; |
||
6811 | UCHAR ucData; |
||
1430 | serge | 6812 | } SW_I2C_IO_DATA_PARAMETERS; |
1117 | serge | 6813 | |
6814 | #define SW_I2C_IO_DATA_PS_ALLOCATION SW_I2C_IO_DATA_PARAMETERS |
||
6815 | |||
6816 | /****************************SW I2C CNTL DEFINITIONS**********************/ |
||
6817 | #define SW_I2C_IO_RESET 0 |
||
6818 | #define SW_I2C_IO_GET 1 |
||
6819 | #define SW_I2C_IO_DRIVE 2 |
||
6820 | #define SW_I2C_IO_SET 3 |
||
6821 | #define SW_I2C_IO_START 4 |
||
6822 | |||
6823 | #define SW_I2C_IO_CLOCK 0 |
||
6824 | #define SW_I2C_IO_DATA 0x80 |
||
6825 | |||
6826 | #define SW_I2C_IO_ZERO 0 |
||
6827 | #define SW_I2C_IO_ONE 0x100 |
||
6828 | |||
6829 | #define SW_I2C_CNTL_READ 0 |
||
6830 | #define SW_I2C_CNTL_WRITE 1 |
||
6831 | #define SW_I2C_CNTL_START 2 |
||
6832 | #define SW_I2C_CNTL_STOP 3 |
||
6833 | #define SW_I2C_CNTL_OPEN 4 |
||
6834 | #define SW_I2C_CNTL_CLOSE 5 |
||
6835 | #define SW_I2C_CNTL_WRITE1BIT 6 |
||
6836 | |||
1430 | serge | 6837 | //==============================VESA definition Portion=============================== |
1963 | serge | 6838 | #define VESA_OEM_PRODUCT_REV "01.00" |
1430 | serge | 6839 | #define VESA_MODE_ATTRIBUTE_MODE_SUPPORT 0xBB //refer to VBE spec p.32, no TTY support |
1117 | serge | 6840 | #define VESA_MODE_WIN_ATTRIBUTE 7 |
6841 | #define VESA_WIN_SIZE 64 |
||
6842 | |||
1430 | serge | 6843 | typedef struct _PTR_32_BIT_STRUCTURE |
6844 | { |
||
6104 | serge | 6845 | USHORT Offset16; |
6846 | USHORT Segment16; |
||
1117 | serge | 6847 | } PTR_32_BIT_STRUCTURE; |
6848 | |||
1430 | serge | 6849 | typedef union _PTR_32_BIT_UNION |
6850 | { |
||
6104 | serge | 6851 | PTR_32_BIT_STRUCTURE SegmentOffset; |
6852 | ULONG Ptr32_Bit; |
||
1117 | serge | 6853 | } PTR_32_BIT_UNION; |
6854 | |||
1430 | serge | 6855 | typedef struct _VBE_1_2_INFO_BLOCK_UPDATABLE |
6856 | { |
||
6104 | serge | 6857 | UCHAR VbeSignature[4]; |
6858 | USHORT VbeVersion; |
||
6859 | PTR_32_BIT_UNION OemStringPtr; |
||
6860 | UCHAR Capabilities[4]; |
||
6861 | PTR_32_BIT_UNION VideoModePtr; |
||
6862 | USHORT TotalMemory; |
||
1117 | serge | 6863 | } VBE_1_2_INFO_BLOCK_UPDATABLE; |
6864 | |||
1430 | serge | 6865 | |
6866 | typedef struct _VBE_2_0_INFO_BLOCK_UPDATABLE |
||
6867 | { |
||
6104 | serge | 6868 | VBE_1_2_INFO_BLOCK_UPDATABLE CommonBlock; |
6869 | USHORT OemSoftRev; |
||
6870 | PTR_32_BIT_UNION OemVendorNamePtr; |
||
6871 | PTR_32_BIT_UNION OemProductNamePtr; |
||
6872 | PTR_32_BIT_UNION OemProductRevPtr; |
||
1117 | serge | 6873 | } VBE_2_0_INFO_BLOCK_UPDATABLE; |
6874 | |||
1430 | serge | 6875 | typedef union _VBE_VERSION_UNION |
6876 | { |
||
6104 | serge | 6877 | VBE_2_0_INFO_BLOCK_UPDATABLE VBE_2_0_InfoBlock; |
6878 | VBE_1_2_INFO_BLOCK_UPDATABLE VBE_1_2_InfoBlock; |
||
1117 | serge | 6879 | } VBE_VERSION_UNION; |
6880 | |||
1430 | serge | 6881 | typedef struct _VBE_INFO_BLOCK |
6882 | { |
||
6104 | serge | 6883 | VBE_VERSION_UNION UpdatableVBE_Info; |
6884 | UCHAR Reserved[222]; |
||
6885 | UCHAR OemData[256]; |
||
1117 | serge | 6886 | } VBE_INFO_BLOCK; |
6887 | |||
1430 | serge | 6888 | typedef struct _VBE_FP_INFO |
6889 | { |
||
6104 | serge | 6890 | USHORT HSize; |
6891 | USHORT VSize; |
||
6892 | USHORT FPType; |
||
6893 | UCHAR RedBPP; |
||
6894 | UCHAR GreenBPP; |
||
6895 | UCHAR BlueBPP; |
||
6896 | UCHAR ReservedBPP; |
||
6897 | ULONG RsvdOffScrnMemSize; |
||
6898 | ULONG RsvdOffScrnMEmPtr; |
||
6899 | UCHAR Reserved[14]; |
||
1117 | serge | 6900 | } VBE_FP_INFO; |
6901 | |||
1430 | serge | 6902 | typedef struct _VESA_MODE_INFO_BLOCK |
6903 | { |
||
6904 | // Mandatory information for all VBE revisions |
||
6905 | USHORT ModeAttributes; // dw ? ; mode attributes |
||
6906 | UCHAR WinAAttributes; // db ? ; window A attributes |
||
6907 | UCHAR WinBAttributes; // db ? ; window B attributes |
||
6908 | USHORT WinGranularity; // dw ? ; window granularity |
||
6909 | USHORT WinSize; // dw ? ; window size |
||
6910 | USHORT WinASegment; // dw ? ; window A start segment |
||
6911 | USHORT WinBSegment; // dw ? ; window B start segment |
||
6912 | ULONG WinFuncPtr; // dd ? ; real mode pointer to window function |
||
6913 | USHORT BytesPerScanLine;// dw ? ; bytes per scan line |
||
1117 | serge | 6914 | |
1430 | serge | 6915 | //; Mandatory information for VBE 1.2 and above |
6916 | USHORT XResolution; // dw ? ; horizontal resolution in pixels or characters |
||
6917 | USHORT YResolution; // dw ? ; vertical resolution in pixels or characters |
||
6918 | UCHAR XCharSize; // db ? ; character cell width in pixels |
||
6919 | UCHAR YCharSize; // db ? ; character cell height in pixels |
||
6920 | UCHAR NumberOfPlanes; // db ? ; number of memory planes |
||
6921 | UCHAR BitsPerPixel; // db ? ; bits per pixel |
||
6922 | UCHAR NumberOfBanks; // db ? ; number of banks |
||
6923 | UCHAR MemoryModel; // db ? ; memory model type |
||
6924 | UCHAR BankSize; // db ? ; bank size in KB |
||
6925 | UCHAR NumberOfImagePages;// db ? ; number of images |
||
6926 | UCHAR ReservedForPageFunction;//db 1 ; reserved for page function |
||
1117 | serge | 6927 | |
1430 | serge | 6928 | //; Direct Color fields(required for direct/6 and YUV/7 memory models) |
6929 | UCHAR RedMaskSize; // db ? ; size of direct color red mask in bits |
||
6930 | UCHAR RedFieldPosition; // db ? ; bit position of lsb of red mask |
||
6931 | UCHAR GreenMaskSize; // db ? ; size of direct color green mask in bits |
||
6932 | UCHAR GreenFieldPosition; // db ? ; bit position of lsb of green mask |
||
6933 | UCHAR BlueMaskSize; // db ? ; size of direct color blue mask in bits |
||
6934 | UCHAR BlueFieldPosition; // db ? ; bit position of lsb of blue mask |
||
6935 | UCHAR RsvdMaskSize; // db ? ; size of direct color reserved mask in bits |
||
6936 | UCHAR RsvdFieldPosition; // db ? ; bit position of lsb of reserved mask |
||
6937 | UCHAR DirectColorModeInfo;// db ? ; direct color mode attributes |
||
1117 | serge | 6938 | |
1430 | serge | 6939 | //; Mandatory information for VBE 2.0 and above |
6940 | ULONG PhysBasePtr; // dd ? ; physical address for flat memory frame buffer |
||
6941 | ULONG Reserved_1; // dd 0 ; reserved - always set to 0 |
||
6942 | USHORT Reserved_2; // dw 0 ; reserved - always set to 0 |
||
1117 | serge | 6943 | |
1430 | serge | 6944 | //; Mandatory information for VBE 3.0 and above |
6945 | USHORT LinBytesPerScanLine; // dw ? ; bytes per scan line for linear modes |
||
6946 | UCHAR BnkNumberOfImagePages;// db ? ; number of images for banked modes |
||
6947 | UCHAR LinNumberOfImagPages; // db ? ; number of images for linear modes |
||
6948 | UCHAR LinRedMaskSize; // db ? ; size of direct color red mask(linear modes) |
||
6949 | UCHAR LinRedFieldPosition; // db ? ; bit position of lsb of red mask(linear modes) |
||
6950 | UCHAR LinGreenMaskSize; // db ? ; size of direct color green mask(linear modes) |
||
6951 | UCHAR LinGreenFieldPosition;// db ? ; bit position of lsb of green mask(linear modes) |
||
6952 | UCHAR LinBlueMaskSize; // db ? ; size of direct color blue mask(linear modes) |
||
6953 | UCHAR LinBlueFieldPosition; // db ? ; bit position of lsb of blue mask(linear modes) |
||
6954 | UCHAR LinRsvdMaskSize; // db ? ; size of direct color reserved mask(linear modes) |
||
6955 | UCHAR LinRsvdFieldPosition; // db ? ; bit position of lsb of reserved mask(linear modes) |
||
6956 | ULONG MaxPixelClock; // dd ? ; maximum pixel clock(in Hz) for graphics mode |
||
6957 | UCHAR Reserved; // db 190 dup (0) |
||
1117 | serge | 6958 | } VESA_MODE_INFO_BLOCK; |
6959 | |||
1430 | serge | 6960 | // BIOS function CALLS |
6961 | #define ATOM_BIOS_EXTENDED_FUNCTION_CODE 0xA0 // ATI Extended Function code |
||
1117 | serge | 6962 | #define ATOM_BIOS_FUNCTION_COP_MODE 0x00 |
6963 | #define ATOM_BIOS_FUNCTION_SHORT_QUERY1 0x04 |
||
6964 | #define ATOM_BIOS_FUNCTION_SHORT_QUERY2 0x05 |
||
6965 | #define ATOM_BIOS_FUNCTION_SHORT_QUERY3 0x06 |
||
6104 | serge | 6966 | #define ATOM_BIOS_FUNCTION_GET_DDC 0x0B |
1117 | serge | 6967 | #define ATOM_BIOS_FUNCTION_ASIC_DSTATE 0x0E |
6968 | #define ATOM_BIOS_FUNCTION_DEBUG_PLAY 0x0F |
||
6969 | #define ATOM_BIOS_FUNCTION_STV_STD 0x16 |
||
6970 | #define ATOM_BIOS_FUNCTION_DEVICE_DET 0x17 |
||
6971 | #define ATOM_BIOS_FUNCTION_DEVICE_SWITCH 0x18 |
||
6972 | |||
6973 | #define ATOM_BIOS_FUNCTION_PANEL_CONTROL 0x82 |
||
6974 | #define ATOM_BIOS_FUNCTION_OLD_DEVICE_DET 0x83 |
||
6975 | #define ATOM_BIOS_FUNCTION_OLD_DEVICE_SWITCH 0x84 |
||
6104 | serge | 6976 | #define ATOM_BIOS_FUNCTION_HW_ICON 0x8A |
1117 | serge | 6977 | #define ATOM_BIOS_FUNCTION_SET_CMOS 0x8B |
1430 | serge | 6978 | #define SUB_FUNCTION_UPDATE_DISPLAY_INFO 0x8000 // Sub function 80 |
6979 | #define SUB_FUNCTION_UPDATE_EXPANSION_INFO 0x8100 // Sub function 80 |
||
1117 | serge | 6980 | |
6981 | #define ATOM_BIOS_FUNCTION_DISPLAY_INFO 0x8D |
||
6982 | #define ATOM_BIOS_FUNCTION_DEVICE_ON_OFF 0x8E |
||
6104 | serge | 6983 | #define ATOM_BIOS_FUNCTION_VIDEO_STATE 0x8F |
1430 | serge | 6984 | #define ATOM_SUB_FUNCTION_GET_CRITICAL_STATE 0x0300 // Sub function 03 |
6985 | #define ATOM_SUB_FUNCTION_GET_LIDSTATE 0x0700 // Sub function 7 |
||
6986 | #define ATOM_SUB_FUNCTION_THERMAL_STATE_NOTICE 0x1400 // Notify caller the current thermal state |
||
6987 | #define ATOM_SUB_FUNCTION_CRITICAL_STATE_NOTICE 0x8300 // Notify caller the current critical state |
||
6988 | #define ATOM_SUB_FUNCTION_SET_LIDSTATE 0x8500 // Sub function 85 |
||
6989 | #define ATOM_SUB_FUNCTION_GET_REQ_DISPLAY_FROM_SBIOS_MODE 0x8900// Sub function 89 |
||
6990 | #define ATOM_SUB_FUNCTION_INFORM_ADC_SUPPORT 0x9400 // Notify caller that ADC is supported |
||
6991 | |||
1117 | serge | 6992 | |
1430 | serge | 6993 | #define ATOM_BIOS_FUNCTION_VESA_DPMS 0x4F10 // Set DPMS |
6994 | #define ATOM_SUB_FUNCTION_SET_DPMS 0x0001 // BL: Sub function 01 |
||
6995 | #define ATOM_SUB_FUNCTION_GET_DPMS 0x0002 // BL: Sub function 02 |
||
6996 | #define ATOM_PARAMETER_VESA_DPMS_ON 0x0000 // BH Parameter for DPMS ON. |
||
6997 | #define ATOM_PARAMETER_VESA_DPMS_STANDBY 0x0100 // BH Parameter for DPMS STANDBY |
||
6998 | #define ATOM_PARAMETER_VESA_DPMS_SUSPEND 0x0200 // BH Parameter for DPMS SUSPEND |
||
6999 | #define ATOM_PARAMETER_VESA_DPMS_OFF 0x0400 // BH Parameter for DPMS OFF |
||
7000 | #define ATOM_PARAMETER_VESA_DPMS_REDUCE_ON 0x0800 // BH Parameter for DPMS REDUCE ON (NOT SUPPORTED) |
||
1117 | serge | 7001 | |
7002 | #define ATOM_BIOS_RETURN_CODE_MASK 0x0000FF00L |
||
7003 | #define ATOM_BIOS_REG_HIGH_MASK 0x0000FF00L |
||
7004 | #define ATOM_BIOS_REG_LOW_MASK 0x000000FFL |
||
7005 | |||
1430 | serge | 7006 | // structure used for VBIOS only |
1117 | serge | 7007 | |
1430 | serge | 7008 | //DispOutInfoTable |
7009 | typedef struct _ASIC_TRANSMITTER_INFO |
||
7010 | { |
||
1117 | serge | 7011 | USHORT usTransmitterObjId; |
7012 | USHORT usSupportDevice; |
||
6104 | serge | 7013 | UCHAR ucTransmitterCmdTblId; |
7014 | UCHAR ucConfig; |
||
1430 | serge | 7015 | UCHAR ucEncoderID; //available 1st encoder ( default ) |
7016 | UCHAR ucOptionEncoderID; //available 2nd encoder ( optional ) |
||
6104 | serge | 7017 | UCHAR uc2ndEncoderID; |
7018 | UCHAR ucReserved; |
||
1430 | serge | 7019 | }ASIC_TRANSMITTER_INFO; |
1117 | serge | 7020 | |
1963 | serge | 7021 | #define ASIC_TRANSMITTER_INFO_CONFIG__DVO_SDR_MODE 0x01 |
7022 | #define ASIC_TRANSMITTER_INFO_CONFIG__COHERENT_MODE 0x02 |
||
7023 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODEROBJ_ID_MASK 0xc4 |
||
7024 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_A 0x00 |
||
7025 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_B 0x04 |
||
7026 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_C 0x40 |
||
7027 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_D 0x44 |
||
7028 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_E 0x80 |
||
7029 | #define ASIC_TRANSMITTER_INFO_CONFIG__ENCODER_F 0x84 |
||
7030 | |||
1430 | serge | 7031 | typedef struct _ASIC_ENCODER_INFO |
7032 | { |
||
1117 | serge | 7033 | UCHAR ucEncoderID; |
7034 | UCHAR ucEncoderConfig; |
||
6104 | serge | 7035 | USHORT usEncoderCmdTblId; |
1430 | serge | 7036 | }ASIC_ENCODER_INFO; |
1117 | serge | 7037 | |
1430 | serge | 7038 | typedef struct _ATOM_DISP_OUT_INFO |
7039 | { |
||
7040 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
7041 | USHORT ptrTransmitterInfo; |
||
7042 | USHORT ptrEncoderInfo; |
||
7043 | ASIC_TRANSMITTER_INFO asTransmitterInfo[1]; |
||
7044 | ASIC_ENCODER_INFO asEncoderInfo[1]; |
||
7045 | }ATOM_DISP_OUT_INFO; |
||
7046 | |||
7047 | typedef struct _ATOM_DISP_OUT_INFO_V2 |
||
7048 | { |
||
6104 | serge | 7049 | ATOM_COMMON_TABLE_HEADER sHeader; |
1117 | serge | 7050 | USHORT ptrTransmitterInfo; |
7051 | USHORT ptrEncoderInfo; |
||
1430 | serge | 7052 | USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. |
6104 | serge | 7053 | ASIC_TRANSMITTER_INFO asTransmitterInfo[1]; |
7054 | ASIC_ENCODER_INFO asEncoderInfo[1]; |
||
1430 | serge | 7055 | }ATOM_DISP_OUT_INFO_V2; |
1117 | serge | 7056 | |
2997 | Serge | 7057 | |
7058 | typedef struct _ATOM_DISP_CLOCK_ID { |
||
7059 | UCHAR ucPpllId; |
||
7060 | UCHAR ucPpllAttribute; |
||
7061 | }ATOM_DISP_CLOCK_ID; |
||
7062 | |||
7063 | // ucPpllAttribute |
||
7064 | #define CLOCK_SOURCE_SHAREABLE 0x01 |
||
7065 | #define CLOCK_SOURCE_DP_MODE 0x02 |
||
7066 | #define CLOCK_SOURCE_NONE_DP_MODE 0x04 |
||
7067 | |||
7068 | //DispOutInfoTable |
||
7069 | typedef struct _ASIC_TRANSMITTER_INFO_V2 |
||
7070 | { |
||
7071 | USHORT usTransmitterObjId; |
||
7072 | USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object |
||
7073 | UCHAR ucTransmitterCmdTblId; |
||
7074 | UCHAR ucConfig; |
||
7075 | UCHAR ucEncoderID; // available 1st encoder ( default ) |
||
7076 | UCHAR ucOptionEncoderID; // available 2nd encoder ( optional ) |
||
7077 | UCHAR uc2ndEncoderID; |
||
7078 | UCHAR ucReserved; |
||
7079 | }ASIC_TRANSMITTER_INFO_V2; |
||
7080 | |||
7081 | typedef struct _ATOM_DISP_OUT_INFO_V3 |
||
7082 | { |
||
7083 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
7084 | USHORT ptrTransmitterInfo; |
||
7085 | USHORT ptrEncoderInfo; |
||
7086 | USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. |
||
7087 | USHORT usReserved; |
||
7088 | UCHAR ucDCERevision; |
||
7089 | UCHAR ucMaxDispEngineNum; |
||
7090 | UCHAR ucMaxActiveDispEngineNum; |
||
7091 | UCHAR ucMaxPPLLNum; |
||
6104 | serge | 7092 | UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE |
5078 | serge | 7093 | UCHAR ucDispCaps; |
7094 | UCHAR ucReserved[2]; |
||
6104 | serge | 7095 | ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only |
2997 | Serge | 7096 | }ATOM_DISP_OUT_INFO_V3; |
7097 | |||
5078 | serge | 7098 | //ucDispCaps |
7099 | #define DISPLAY_CAPS__DP_PCLK_FROM_PPLL 0x01 |
||
7100 | #define DISPLAY_CAPS__FORCE_DISPDEV_CONNECTED 0x02 |
||
7101 | |||
2997 | Serge | 7102 | typedef enum CORE_REF_CLK_SOURCE{ |
7103 | CLOCK_SRC_XTALIN=0, |
||
7104 | CLOCK_SRC_XO_IN=1, |
||
7105 | CLOCK_SRC_XO_IN2=2, |
||
7106 | }CORE_REF_CLK_SOURCE; |
||
7107 | |||
1430 | serge | 7108 | // DispDevicePriorityInfo |
7109 | typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO |
||
7110 | { |
||
6104 | serge | 7111 | ATOM_COMMON_TABLE_HEADER sHeader; |
1117 | serge | 7112 | USHORT asDevicePriority[16]; |
1430 | serge | 7113 | }ATOM_DISPLAY_DEVICE_PRIORITY_INFO; |
1117 | serge | 7114 | |
1430 | serge | 7115 | //ProcessAuxChannelTransactionTable |
7116 | typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS |
||
7117 | { |
||
6104 | serge | 7118 | USHORT lpAuxRequest; |
7119 | USHORT lpDataOut; |
||
7120 | UCHAR ucChannelID; |
||
1430 | serge | 7121 | union |
7122 | { |
||
6104 | serge | 7123 | UCHAR ucReplyStatus; |
7124 | UCHAR ucDelay; |
||
1117 | serge | 7125 | }; |
6104 | serge | 7126 | UCHAR ucDataOutLen; |
7127 | UCHAR ucReserved; |
||
1430 | serge | 7128 | }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS; |
1117 | serge | 7129 | |
1430 | serge | 7130 | //ProcessAuxChannelTransactionTable |
7131 | typedef struct _PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 |
||
7132 | { |
||
7133 | USHORT lpAuxRequest; |
||
7134 | USHORT lpDataOut; |
||
7135 | UCHAR ucChannelID; |
||
7136 | union |
||
7137 | { |
||
7138 | UCHAR ucReplyStatus; |
||
7139 | UCHAR ucDelay; |
||
7140 | }; |
||
7141 | UCHAR ucDataOutLen; |
||
7142 | UCHAR ucHPD_ID; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6 |
||
7143 | }PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2; |
||
7144 | |||
1117 | serge | 7145 | #define PROCESS_AUX_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS |
7146 | |||
1430 | serge | 7147 | //GetSinkType |
1117 | serge | 7148 | |
1430 | serge | 7149 | typedef struct _DP_ENCODER_SERVICE_PARAMETERS |
7150 | { |
||
1117 | serge | 7151 | USHORT ucLinkClock; |
1430 | serge | 7152 | union |
7153 | { |
||
7154 | UCHAR ucConfig; // for DP training command |
||
7155 | UCHAR ucI2cId; // use for GET_SINK_TYPE command |
||
1117 | serge | 7156 | }; |
7157 | UCHAR ucAction; |
||
7158 | UCHAR ucStatus; |
||
7159 | UCHAR ucLaneNum; |
||
7160 | UCHAR ucReserved[2]; |
||
1430 | serge | 7161 | }DP_ENCODER_SERVICE_PARAMETERS; |
1117 | serge | 7162 | |
1430 | serge | 7163 | // ucAction |
1117 | serge | 7164 | #define ATOM_DP_ACTION_GET_SINK_TYPE 0x01 |
1430 | serge | 7165 | /* obselete */ |
1117 | serge | 7166 | #define ATOM_DP_ACTION_TRAINING_START 0x02 |
7167 | #define ATOM_DP_ACTION_TRAINING_COMPLETE 0x03 |
||
7168 | #define ATOM_DP_ACTION_TRAINING_PATTERN_SEL 0x04 |
||
7169 | #define ATOM_DP_ACTION_SET_VSWING_PREEMP 0x05 |
||
7170 | #define ATOM_DP_ACTION_GET_VSWING_PREEMP 0x06 |
||
7171 | #define ATOM_DP_ACTION_BLANKING 0x07 |
||
7172 | |||
1430 | serge | 7173 | // ucConfig |
1117 | serge | 7174 | #define ATOM_DP_CONFIG_ENCODER_SEL_MASK 0x03 |
7175 | #define ATOM_DP_CONFIG_DIG1_ENCODER 0x00 |
||
7176 | #define ATOM_DP_CONFIG_DIG2_ENCODER 0x01 |
||
7177 | #define ATOM_DP_CONFIG_EXTERNAL_ENCODER 0x02 |
||
7178 | #define ATOM_DP_CONFIG_LINK_SEL_MASK 0x04 |
||
7179 | #define ATOM_DP_CONFIG_LINK_A 0x00 |
||
7180 | #define ATOM_DP_CONFIG_LINK_B 0x04 |
||
1430 | serge | 7181 | /* /obselete */ |
1117 | serge | 7182 | #define DP_ENCODER_SERVICE_PS_ALLOCATION WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS |
7183 | |||
1963 | serge | 7184 | |
7185 | typedef struct _DP_ENCODER_SERVICE_PARAMETERS_V2 |
||
7186 | { |
||
7187 | USHORT usExtEncoderObjId; // External Encoder Object Id, output parameter only, use when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION |
||
7188 | UCHAR ucAuxId; |
||
7189 | UCHAR ucAction; |
||
7190 | UCHAR ucSinkType; // Iput and Output parameters. |
||
7191 | UCHAR ucHPDId; // Input parameter, used when ucAction = DP_SERVICE_V2_ACTION_DET_EXT_CONNECTION |
||
7192 | UCHAR ucReserved[2]; |
||
7193 | }DP_ENCODER_SERVICE_PARAMETERS_V2; |
||
7194 | |||
7195 | typedef struct _DP_ENCODER_SERVICE_PS_ALLOCATION_V2 |
||
7196 | { |
||
7197 | DP_ENCODER_SERVICE_PARAMETERS_V2 asDPServiceParam; |
||
7198 | PROCESS_AUX_CHANNEL_TRANSACTION_PARAMETERS_V2 asAuxParam; |
||
7199 | }DP_ENCODER_SERVICE_PS_ALLOCATION_V2; |
||
7200 | |||
7201 | // ucAction |
||
7202 | #define DP_SERVICE_V2_ACTION_GET_SINK_TYPE 0x01 |
||
7203 | #define DP_SERVICE_V2_ACTION_DET_LCD_CONNECTION 0x02 |
||
7204 | |||
7205 | |||
1430 | serge | 7206 | // DP_TRAINING_TABLE |
6104 | serge | 7207 | #define DPCD_SET_LINKRATE_LANENUM_PATTERN1_TBL_ADDR ATOM_DP_TRAINING_TBL_ADDR |
1117 | serge | 7208 | #define DPCD_SET_SS_CNTL_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 8 ) |
1430 | serge | 7209 | #define DPCD_SET_LANE_VSWING_PREEMP_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 16 ) |
7210 | #define DPCD_SET_TRAINING_PATTERN0_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 24 ) |
||
1117 | serge | 7211 | #define DPCD_SET_TRAINING_PATTERN2_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 32) |
7212 | #define DPCD_GET_LINKRATE_LANENUM_SS_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 40) |
||
7213 | #define DPCD_GET_LANE_STATUS_ADJUST_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 48) |
||
7214 | #define DP_I2C_AUX_DDC_WRITE_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 60) |
||
7215 | #define DP_I2C_AUX_DDC_WRITE_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 64) |
||
7216 | #define DP_I2C_AUX_DDC_READ_START_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 72) |
||
7217 | #define DP_I2C_AUX_DDC_READ_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 76) |
||
1430 | serge | 7218 | #define DP_I2C_AUX_DDC_WRITE_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 80) |
7219 | #define DP_I2C_AUX_DDC_READ_END_TBL_ADDR (ATOM_DP_TRAINING_TBL_ADDR + 84) |
||
1117 | serge | 7220 | |
1430 | serge | 7221 | typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS |
7222 | { |
||
6104 | serge | 7223 | UCHAR ucI2CSpeed; |
1430 | serge | 7224 | union |
7225 | { |
||
6104 | serge | 7226 | UCHAR ucRegIndex; |
7227 | UCHAR ucStatus; |
||
1117 | serge | 7228 | }; |
6104 | serge | 7229 | USHORT lpI2CDataOut; |
7230 | UCHAR ucFlag; |
||
7231 | UCHAR ucTransBytes; |
||
7232 | UCHAR ucSlaveAddr; |
||
7233 | UCHAR ucLineNumber; |
||
1430 | serge | 7234 | }PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS; |
1117 | serge | 7235 | |
7236 | #define PROCESS_I2C_CHANNEL_TRANSACTION_PS_ALLOCATION PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS |
||
7237 | |||
1430 | serge | 7238 | //ucFlag |
1117 | serge | 7239 | #define HW_I2C_WRITE 1 |
7240 | #define HW_I2C_READ 0 |
||
1430 | serge | 7241 | #define I2C_2BYTE_ADDR 0x02 |
1117 | serge | 7242 | |
2997 | Serge | 7243 | /****************************************************************************/ |
7244 | // Structures used by HW_Misc_OperationTable |
||
7245 | /****************************************************************************/ |
||
7246 | typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 |
||
7247 | { |
||
7248 | UCHAR ucCmd; // Input: To tell which action to take |
||
7249 | UCHAR ucReserved[3]; |
||
7250 | ULONG ulReserved; |
||
7251 | }ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; |
||
7252 | |||
7253 | typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 |
||
7254 | { |
||
7255 | UCHAR ucReturnCode; // Output: Return value base on action was taken |
||
7256 | UCHAR ucReserved[3]; |
||
7257 | ULONG ulReserved; |
||
7258 | }ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1; |
||
7259 | |||
7260 | // Actions code |
||
7261 | #define ATOM_GET_SDI_SUPPORT 0xF0 |
||
7262 | |||
7263 | // Return code |
||
7264 | #define ATOM_UNKNOWN_CMD 0 |
||
7265 | #define ATOM_FEATURE_NOT_SUPPORTED 1 |
||
7266 | #define ATOM_FEATURE_SUPPORTED 2 |
||
7267 | |||
7268 | typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION |
||
7269 | { |
||
7270 | ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output; |
||
7271 | PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved; |
||
7272 | }ATOM_HW_MISC_OPERATION_PS_ALLOCATION; |
||
7273 | |||
7274 | /****************************************************************************/ |
||
7275 | |||
1430 | serge | 7276 | typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 |
7277 | { |
||
7278 | UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ... |
||
7279 | UCHAR ucReserved[3]; |
||
7280 | }SET_HWBLOCK_INSTANCE_PARAMETER_V2; |
||
7281 | |||
7282 | #define HWBLKINST_INSTANCE_MASK 0x07 |
||
7283 | #define HWBLKINST_HWBLK_MASK 0xF0 |
||
7284 | #define HWBLKINST_HWBLK_SHIFT 0x04 |
||
7285 | |||
7286 | //ucHWBlock |
||
7287 | #define SELECT_DISP_ENGINE 0 |
||
7288 | #define SELECT_DISP_PLL 1 |
||
7289 | #define SELECT_DCIO_UNIPHY_LINK0 2 |
||
7290 | #define SELECT_DCIO_UNIPHY_LINK1 3 |
||
7291 | #define SELECT_DCIO_IMPCAL 4 |
||
7292 | #define SELECT_DCIO_DIG 6 |
||
7293 | #define SELECT_CRTC_PIXEL_RATE 7 |
||
1963 | serge | 7294 | #define SELECT_VGA_BLK 8 |
1430 | serge | 7295 | |
2997 | Serge | 7296 | // DIGTransmitterInfoTable structure used to program UNIPHY settings |
7297 | typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{ |
||
7298 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
7299 | USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock |
||
7300 | USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info |
||
7301 | USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range |
||
7302 | USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info |
||
7303 | USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings |
||
7304 | }DIG_TRANSMITTER_INFO_HEADER_V3_1; |
||
7305 | |||
5078 | serge | 7306 | typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_2{ |
7307 | ATOM_COMMON_TABLE_HEADER sHeader; |
||
7308 | USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock |
||
7309 | USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info |
||
7310 | USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range |
||
7311 | USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info |
||
7312 | USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings |
||
7313 | USHORT usDPSSRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy SS Pll register Info |
||
7314 | USHORT usDPSSSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy SS Pll Settings |
||
7315 | }DIG_TRANSMITTER_INFO_HEADER_V3_2; |
||
7316 | |||
2997 | Serge | 7317 | typedef struct _CLOCK_CONDITION_REGESTER_INFO{ |
7318 | USHORT usRegisterIndex; |
||
7319 | UCHAR ucStartBit; |
||
7320 | UCHAR ucEndBit; |
||
7321 | }CLOCK_CONDITION_REGESTER_INFO; |
||
7322 | |||
7323 | typedef struct _CLOCK_CONDITION_SETTING_ENTRY{ |
||
7324 | USHORT usMaxClockFreq; |
||
7325 | UCHAR ucEncodeMode; |
||
7326 | UCHAR ucPhySel; |
||
7327 | ULONG ulAnalogSetting[1]; |
||
7328 | }CLOCK_CONDITION_SETTING_ENTRY; |
||
7329 | |||
7330 | typedef struct _CLOCK_CONDITION_SETTING_INFO{ |
||
7331 | USHORT usEntrySize; |
||
7332 | CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1]; |
||
7333 | }CLOCK_CONDITION_SETTING_INFO; |
||
7334 | |||
7335 | typedef struct _PHY_CONDITION_REG_VAL{ |
||
7336 | ULONG ulCondition; |
||
7337 | ULONG ulRegVal; |
||
7338 | }PHY_CONDITION_REG_VAL; |
||
7339 | |||
5078 | serge | 7340 | typedef struct _PHY_CONDITION_REG_VAL_V2{ |
7341 | ULONG ulCondition; |
||
7342 | UCHAR ucCondition2; |
||
7343 | ULONG ulRegVal; |
||
7344 | }PHY_CONDITION_REG_VAL_V2; |
||
7345 | |||
2997 | Serge | 7346 | typedef struct _PHY_CONDITION_REG_INFO{ |
7347 | USHORT usRegIndex; |
||
7348 | USHORT usSize; |
||
7349 | PHY_CONDITION_REG_VAL asRegVal[1]; |
||
7350 | }PHY_CONDITION_REG_INFO; |
||
7351 | |||
5078 | serge | 7352 | typedef struct _PHY_CONDITION_REG_INFO_V2{ |
7353 | USHORT usRegIndex; |
||
7354 | USHORT usSize; |
||
7355 | PHY_CONDITION_REG_VAL_V2 asRegVal[1]; |
||
7356 | }PHY_CONDITION_REG_INFO_V2; |
||
7357 | |||
2997 | Serge | 7358 | typedef struct _PHY_ANALOG_SETTING_INFO{ |
7359 | UCHAR ucEncodeMode; |
||
7360 | UCHAR ucPhySel; |
||
7361 | USHORT usSize; |
||
7362 | PHY_CONDITION_REG_INFO asAnalogSetting[1]; |
||
7363 | }PHY_ANALOG_SETTING_INFO; |
||
7364 | |||
5078 | serge | 7365 | typedef struct _PHY_ANALOG_SETTING_INFO_V2{ |
7366 | UCHAR ucEncodeMode; |
||
7367 | UCHAR ucPhySel; |
||
7368 | USHORT usSize; |
||
7369 | PHY_CONDITION_REG_INFO_V2 asAnalogSetting[1]; |
||
7370 | }PHY_ANALOG_SETTING_INFO_V2; |
||
7371 | |||
7372 | typedef struct _GFX_HAVESTING_PARAMETERS { |
||
7373 | UCHAR ucGfxBlkId; //GFX blk id to be harvested, like CU, RB or PRIM |
||
7374 | UCHAR ucReserved; //reserved |
||
7375 | UCHAR ucActiveUnitNumPerSH; //requested active CU/RB/PRIM number per shader array |
||
7376 | UCHAR ucMaxUnitNumPerSH; //max CU/RB/PRIM number per shader array |
||
7377 | } GFX_HAVESTING_PARAMETERS; |
||
7378 | |||
7379 | //ucGfxBlkId |
||
7380 | #define GFX_HARVESTING_CU_ID 0 |
||
7381 | #define GFX_HARVESTING_RB_ID 1 |
||
7382 | #define GFX_HARVESTING_PRIM_ID 2 |
||
7383 | |||
1430 | serge | 7384 | /****************************************************************************/ |
7385 | //Portion VI: Definitinos for vbios MC scratch registers that driver used |
||
1117 | serge | 7386 | /****************************************************************************/ |
1430 | serge | 7387 | |
7388 | #define MC_MISC0__MEMORY_TYPE_MASK 0xF0000000 |
||
7389 | #define MC_MISC0__MEMORY_TYPE__GDDR1 0x10000000 |
||
7390 | #define MC_MISC0__MEMORY_TYPE__DDR2 0x20000000 |
||
7391 | #define MC_MISC0__MEMORY_TYPE__GDDR3 0x30000000 |
||
7392 | #define MC_MISC0__MEMORY_TYPE__GDDR4 0x40000000 |
||
7393 | #define MC_MISC0__MEMORY_TYPE__GDDR5 0x50000000 |
||
5078 | serge | 7394 | #define MC_MISC0__MEMORY_TYPE__HBM 0x60000000 |
1430 | serge | 7395 | #define MC_MISC0__MEMORY_TYPE__DDR3 0xB0000000 |
7396 | |||
5078 | serge | 7397 | #define ATOM_MEM_TYPE_DDR_STRING "DDR" |
7398 | #define ATOM_MEM_TYPE_DDR2_STRING "DDR2" |
||
7399 | #define ATOM_MEM_TYPE_GDDR3_STRING "GDDR3" |
||
7400 | #define ATOM_MEM_TYPE_GDDR4_STRING "GDDR4" |
||
7401 | #define ATOM_MEM_TYPE_GDDR5_STRING "GDDR5" |
||
7402 | #define ATOM_MEM_TYPE_HBM_STRING "HBM" |
||
7403 | #define ATOM_MEM_TYPE_DDR3_STRING "DDR3" |
||
7404 | |||
6104 | serge | 7405 | /****************************************************************************/ |
1430 | serge | 7406 | //Portion VI: Definitinos being oboselete |
7407 | /****************************************************************************/ |
||
1117 | serge | 7408 | |
1430 | serge | 7409 | //========================================================================================== |
7410 | //Remove the definitions below when driver is ready! |
||
7411 | typedef struct _ATOM_DAC_INFO |
||
7412 | { |
||
6104 | serge | 7413 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 7414 | USHORT usMaxFrequency; // in 10kHz unit |
6104 | serge | 7415 | USHORT usReserved; |
1430 | serge | 7416 | }ATOM_DAC_INFO; |
1117 | serge | 7417 | |
1430 | serge | 7418 | |
7419 | typedef struct _COMPASSIONATE_DATA |
||
7420 | { |
||
6104 | serge | 7421 | ATOM_COMMON_TABLE_HEADER sHeader; |
1117 | serge | 7422 | |
1430 | serge | 7423 | //============================== DAC1 portion |
6104 | serge | 7424 | UCHAR ucDAC1_BG_Adjustment; |
7425 | UCHAR ucDAC1_DAC_Adjustment; |
||
7426 | USHORT usDAC1_FORCE_Data; |
||
1430 | serge | 7427 | //============================== DAC2 portion |
6104 | serge | 7428 | UCHAR ucDAC2_CRT2_BG_Adjustment; |
7429 | UCHAR ucDAC2_CRT2_DAC_Adjustment; |
||
7430 | USHORT usDAC2_CRT2_FORCE_Data; |
||
7431 | USHORT usDAC2_CRT2_MUX_RegisterIndex; |
||
1430 | serge | 7432 | UCHAR ucDAC2_CRT2_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low |
6104 | serge | 7433 | UCHAR ucDAC2_NTSC_BG_Adjustment; |
7434 | UCHAR ucDAC2_NTSC_DAC_Adjustment; |
||
7435 | USHORT usDAC2_TV1_FORCE_Data; |
||
7436 | USHORT usDAC2_TV1_MUX_RegisterIndex; |
||
1430 | serge | 7437 | UCHAR ucDAC2_TV1_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low |
6104 | serge | 7438 | UCHAR ucDAC2_CV_BG_Adjustment; |
7439 | UCHAR ucDAC2_CV_DAC_Adjustment; |
||
7440 | USHORT usDAC2_CV_FORCE_Data; |
||
7441 | USHORT usDAC2_CV_MUX_RegisterIndex; |
||
1430 | serge | 7442 | UCHAR ucDAC2_CV_MUX_RegisterInfo; //Bit[4:0]=Bit position,Bit[7]=1:Active High;=0 Active Low |
6104 | serge | 7443 | UCHAR ucDAC2_PAL_BG_Adjustment; |
7444 | UCHAR ucDAC2_PAL_DAC_Adjustment; |
||
7445 | USHORT usDAC2_TV2_FORCE_Data; |
||
1430 | serge | 7446 | }COMPASSIONATE_DATA; |
1117 | serge | 7447 | |
7448 | /****************************Supported Device Info Table Definitions**********************/ |
||
1430 | serge | 7449 | // ucConnectInfo: |
7450 | // [7:4] - connector type |
||
7451 | // = 1 - VGA connector |
||
7452 | // = 2 - DVI-I |
||
7453 | // = 3 - DVI-D |
||
7454 | // = 4 - DVI-A |
||
7455 | // = 5 - SVIDEO |
||
7456 | // = 6 - COMPOSITE |
||
7457 | // = 7 - LVDS |
||
7458 | // = 8 - DIGITAL LINK |
||
7459 | // = 9 - SCART |
||
7460 | // = 0xA - HDMI_type A |
||
7461 | // = 0xB - HDMI_type B |
||
7462 | // = 0xE - Special case1 (DVI+DIN) |
||
7463 | // Others=TBD |
||
7464 | // [3:0] - DAC Associated |
||
7465 | // = 0 - no DAC |
||
7466 | // = 1 - DACA |
||
7467 | // = 2 - DACB |
||
7468 | // = 3 - External DAC |
||
7469 | // Others=TBD |
||
7470 | // |
||
1117 | serge | 7471 | |
1430 | serge | 7472 | typedef struct _ATOM_CONNECTOR_INFO |
7473 | { |
||
1117 | serge | 7474 | #if ATOM_BIG_ENDIAN |
6104 | serge | 7475 | UCHAR bfConnectorType:4; |
7476 | UCHAR bfAssociatedDAC:4; |
||
1117 | serge | 7477 | #else |
6104 | serge | 7478 | UCHAR bfAssociatedDAC:4; |
7479 | UCHAR bfConnectorType:4; |
||
1117 | serge | 7480 | #endif |
1430 | serge | 7481 | }ATOM_CONNECTOR_INFO; |
1117 | serge | 7482 | |
1430 | serge | 7483 | typedef union _ATOM_CONNECTOR_INFO_ACCESS |
7484 | { |
||
6104 | serge | 7485 | ATOM_CONNECTOR_INFO sbfAccess; |
7486 | UCHAR ucAccess; |
||
1430 | serge | 7487 | }ATOM_CONNECTOR_INFO_ACCESS; |
1117 | serge | 7488 | |
1430 | serge | 7489 | typedef struct _ATOM_CONNECTOR_INFO_I2C |
7490 | { |
||
6104 | serge | 7491 | ATOM_CONNECTOR_INFO_ACCESS sucConnectorInfo; |
7492 | ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; |
||
1430 | serge | 7493 | }ATOM_CONNECTOR_INFO_I2C; |
1117 | serge | 7494 | |
1430 | serge | 7495 | |
7496 | typedef struct _ATOM_SUPPORTED_DEVICES_INFO |
||
7497 | { |
||
6104 | serge | 7498 | ATOM_COMMON_TABLE_HEADER sHeader; |
7499 | USHORT usDeviceSupport; |
||
7500 | ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO]; |
||
1430 | serge | 7501 | }ATOM_SUPPORTED_DEVICES_INFO; |
1117 | serge | 7502 | |
7503 | #define NO_INT_SRC_MAPPED 0xFF |
||
7504 | |||
1430 | serge | 7505 | typedef struct _ATOM_CONNECTOR_INC_SRC_BITMAP |
7506 | { |
||
6104 | serge | 7507 | UCHAR ucIntSrcBitmap; |
1430 | serge | 7508 | }ATOM_CONNECTOR_INC_SRC_BITMAP; |
1117 | serge | 7509 | |
1430 | serge | 7510 | typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2 |
7511 | { |
||
6104 | serge | 7512 | ATOM_COMMON_TABLE_HEADER sHeader; |
7513 | USHORT usDeviceSupport; |
||
7514 | ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; |
||
1430 | serge | 7515 | ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE_INFO_2]; |
7516 | }ATOM_SUPPORTED_DEVICES_INFO_2; |
||
1117 | serge | 7517 | |
1430 | serge | 7518 | typedef struct _ATOM_SUPPORTED_DEVICES_INFO_2d1 |
7519 | { |
||
6104 | serge | 7520 | ATOM_COMMON_TABLE_HEADER sHeader; |
7521 | USHORT usDeviceSupport; |
||
7522 | ATOM_CONNECTOR_INFO_I2C asConnInfo[ATOM_MAX_SUPPORTED_DEVICE]; |
||
7523 | ATOM_CONNECTOR_INC_SRC_BITMAP asIntSrcInfo[ATOM_MAX_SUPPORTED_DEVICE]; |
||
1430 | serge | 7524 | }ATOM_SUPPORTED_DEVICES_INFO_2d1; |
1117 | serge | 7525 | |
7526 | #define ATOM_SUPPORTED_DEVICES_INFO_LAST ATOM_SUPPORTED_DEVICES_INFO_2d1 |
||
7527 | |||
1430 | serge | 7528 | |
7529 | |||
7530 | typedef struct _ATOM_MISC_CONTROL_INFO |
||
7531 | { |
||
6104 | serge | 7532 | USHORT usFrequency; |
1430 | serge | 7533 | UCHAR ucPLL_ChargePump; // PLL charge-pump gain control |
7534 | UCHAR ucPLL_DutyCycle; // PLL duty cycle control |
||
7535 | UCHAR ucPLL_VCO_Gain; // PLL VCO gain control |
||
7536 | UCHAR ucPLL_VoltageSwing; // PLL driver voltage swing control |
||
7537 | }ATOM_MISC_CONTROL_INFO; |
||
1117 | serge | 7538 | |
1430 | serge | 7539 | |
1117 | serge | 7540 | #define ATOM_MAX_MISC_INFO 4 |
7541 | |||
1430 | serge | 7542 | typedef struct _ATOM_TMDS_INFO |
7543 | { |
||
6104 | serge | 7544 | ATOM_COMMON_TABLE_HEADER sHeader; |
1430 | serge | 7545 | USHORT usMaxFrequency; // in 10Khz |
6104 | serge | 7546 | ATOM_MISC_CONTROL_INFO asMiscInfo[ATOM_MAX_MISC_INFO]; |
1430 | serge | 7547 | }ATOM_TMDS_INFO; |
1117 | serge | 7548 | |
1430 | serge | 7549 | |
7550 | typedef struct _ATOM_ENCODER_ANALOG_ATTRIBUTE |
||
7551 | { |
||
7552 | UCHAR ucTVStandard; //Same as TV standards defined above, |
||
6104 | serge | 7553 | UCHAR ucPadding[1]; |
1430 | serge | 7554 | }ATOM_ENCODER_ANALOG_ATTRIBUTE; |
1117 | serge | 7555 | |
1430 | serge | 7556 | typedef struct _ATOM_ENCODER_DIGITAL_ATTRIBUTE |
7557 | { |
||
7558 | UCHAR ucAttribute; //Same as other digital encoder attributes defined above |
||
6104 | serge | 7559 | UCHAR ucPadding[1]; |
1430 | serge | 7560 | }ATOM_ENCODER_DIGITAL_ATTRIBUTE; |
1117 | serge | 7561 | |
1430 | serge | 7562 | typedef union _ATOM_ENCODER_ATTRIBUTE |
7563 | { |
||
6104 | serge | 7564 | ATOM_ENCODER_ANALOG_ATTRIBUTE sAlgAttrib; |
7565 | ATOM_ENCODER_DIGITAL_ATTRIBUTE sDigAttrib; |
||
1430 | serge | 7566 | }ATOM_ENCODER_ATTRIBUTE; |
1117 | serge | 7567 | |
1430 | serge | 7568 | |
7569 | typedef struct _DVO_ENCODER_CONTROL_PARAMETERS |
||
7570 | { |
||
6104 | serge | 7571 | USHORT usPixelClock; |
7572 | USHORT usEncoderID; |
||
1430 | serge | 7573 | UCHAR ucDeviceType; //Use ATOM_DEVICE_xxx1_Index to indicate device type only. |
7574 | UCHAR ucAction; //ATOM_ENABLE/ATOM_DISABLE/ATOM_HPD_INIT |
||
6104 | serge | 7575 | ATOM_ENCODER_ATTRIBUTE usDevAttr; |
1430 | serge | 7576 | }DVO_ENCODER_CONTROL_PARAMETERS; |
1117 | serge | 7577 | |
1430 | serge | 7578 | typedef struct _DVO_ENCODER_CONTROL_PS_ALLOCATION |
7579 | { |
||
6104 | serge | 7580 | DVO_ENCODER_CONTROL_PARAMETERS sDVOEncoder; |
1430 | serge | 7581 | WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; //Caller doesn't need to init this portion |
7582 | }DVO_ENCODER_CONTROL_PS_ALLOCATION; |
||
1117 | serge | 7583 | |
1430 | serge | 7584 | |
1117 | serge | 7585 | #define ATOM_XTMDS_ASIC_SI164_ID 1 |
7586 | #define ATOM_XTMDS_ASIC_SI178_ID 2 |
||
7587 | #define ATOM_XTMDS_ASIC_TFP513_ID 3 |
||
7588 | #define ATOM_XTMDS_SUPPORTED_SINGLELINK 0x00000001 |
||
7589 | #define ATOM_XTMDS_SUPPORTED_DUALLINK 0x00000002 |
||
7590 | #define ATOM_XTMDS_MVPU_FPGA 0x00000004 |
||
7591 | |||
1430 | serge | 7592 | |
7593 | typedef struct _ATOM_XTMDS_INFO |
||
7594 | { |
||
6104 | serge | 7595 | ATOM_COMMON_TABLE_HEADER sHeader; |
7596 | USHORT usSingleLinkMaxFrequency; |
||
1430 | serge | 7597 | ATOM_I2C_ID_CONFIG_ACCESS sucI2cId; //Point the ID on which I2C is used to control external chip |
6104 | serge | 7598 | UCHAR ucXtransimitterID; |
1430 | serge | 7599 | UCHAR ucSupportedLink; // Bit field, bit0=1, single link supported;bit1=1,dual link supported |
7600 | UCHAR ucSequnceAlterID; // Even with the same external TMDS asic, it's possible that the program seqence alters |
||
7601 | // due to design. This ID is used to alert driver that the sequence is not "standard"! |
||
7602 | UCHAR ucMasterAddress; // Address to control Master xTMDS Chip |
||
7603 | UCHAR ucSlaveAddress; // Address to control Slave xTMDS Chip |
||
7604 | }ATOM_XTMDS_INFO; |
||
1117 | serge | 7605 | |
1430 | serge | 7606 | typedef struct _DFP_DPMS_STATUS_CHANGE_PARAMETERS |
7607 | { |
||
7608 | UCHAR ucEnable; // ATOM_ENABLE=On or ATOM_DISABLE=Off |
||
7609 | UCHAR ucDevice; // ATOM_DEVICE_DFP1_INDEX.... |
||
6104 | serge | 7610 | UCHAR ucPadding[2]; |
1430 | serge | 7611 | }DFP_DPMS_STATUS_CHANGE_PARAMETERS; |
1117 | serge | 7612 | |
7613 | /****************************Legacy Power Play Table Definitions **********************/ |
||
7614 | |||
1430 | serge | 7615 | //Definitions for ulPowerPlayMiscInfo |
1117 | serge | 7616 | #define ATOM_PM_MISCINFO_SPLIT_CLOCK 0x00000000L |
7617 | #define ATOM_PM_MISCINFO_USING_MCLK_SRC 0x00000001L |
||
7618 | #define ATOM_PM_MISCINFO_USING_SCLK_SRC 0x00000002L |
||
7619 | |||
7620 | #define ATOM_PM_MISCINFO_VOLTAGE_DROP_SUPPORT 0x00000004L |
||
7621 | #define ATOM_PM_MISCINFO_VOLTAGE_DROP_ACTIVE_HIGH 0x00000008L |
||
7622 | |||
7623 | #define ATOM_PM_MISCINFO_LOAD_PERFORMANCE_EN 0x00000010L |
||
7624 | |||
7625 | #define ATOM_PM_MISCINFO_ENGINE_CLOCK_CONTRL_EN 0x00000020L |
||
7626 | #define ATOM_PM_MISCINFO_MEMORY_CLOCK_CONTRL_EN 0x00000040L |
||
1430 | serge | 7627 | #define ATOM_PM_MISCINFO_PROGRAM_VOLTAGE 0x00000080L //When this bit set, ucVoltageDropIndex is not an index for GPIO pin, but a voltage ID that SW needs program |
6104 | serge | 7628 | |
1117 | serge | 7629 | #define ATOM_PM_MISCINFO_ASIC_REDUCED_SPEED_SCLK_EN 0x00000100L |
7630 | #define ATOM_PM_MISCINFO_ASIC_DYNAMIC_VOLTAGE_EN 0x00000200L |
||
7631 | #define ATOM_PM_MISCINFO_ASIC_SLEEP_MODE_EN 0x00000400L |
||
7632 | #define ATOM_PM_MISCINFO_LOAD_BALANCE_EN 0x00000800L |
||
7633 | #define ATOM_PM_MISCINFO_DEFAULT_DC_STATE_ENTRY_TRUE 0x00001000L |
||
7634 | #define ATOM_PM_MISCINFO_DEFAULT_LOW_DC_STATE_ENTRY_TRUE 0x00002000L |
||
7635 | #define ATOM_PM_MISCINFO_LOW_LCD_REFRESH_RATE 0x00004000L |
||
7636 | |||
7637 | #define ATOM_PM_MISCINFO_DRIVER_DEFAULT_MODE 0x00008000L |
||
6104 | serge | 7638 | #define ATOM_PM_MISCINFO_OVER_CLOCK_MODE 0x00010000L |
1117 | serge | 7639 | #define ATOM_PM_MISCINFO_OVER_DRIVE_MODE 0x00020000L |
7640 | #define ATOM_PM_MISCINFO_POWER_SAVING_MODE 0x00040000L |
||
7641 | #define ATOM_PM_MISCINFO_THERMAL_DIODE_MODE 0x00080000L |
||
7642 | |||
1430 | serge | 7643 | #define ATOM_PM_MISCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-Reserved |
6104 | serge | 7644 | #define ATOM_PM_MISCINFO_FRAME_MODULATION_SHIFT 20 |
1117 | serge | 7645 | |
7646 | #define ATOM_PM_MISCINFO_DYN_CLK_3D_IDLE 0x00400000L |
||
7647 | #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_2 0x00800000L |
||
7648 | #define ATOM_PM_MISCINFO_DYNAMIC_CLOCK_DIVIDER_BY_4 0x01000000L |
||
1430 | serge | 7649 | #define ATOM_PM_MISCINFO_DYNAMIC_HDP_BLOCK_EN 0x02000000L //When set, Dynamic |
7650 | #define ATOM_PM_MISCINFO_DYNAMIC_MC_HOST_BLOCK_EN 0x04000000L //When set, Dynamic |
||
7651 | #define ATOM_PM_MISCINFO_3D_ACCELERATION_EN 0x08000000L //When set, This mode is for acceleated 3D mode |
||
1117 | serge | 7652 | |
1430 | serge | 7653 | #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-High Performance, 5- Optimal Performance (Default state with Default clocks) |
1117 | serge | 7654 | #define ATOM_PM_MISCINFO_POWERPLAY_SETTINGS_GROUP_SHIFT 28 |
7655 | #define ATOM_PM_MISCINFO_ENABLE_BACK_BIAS 0x80000000L |
||
7656 | |||
7657 | #define ATOM_PM_MISCINFO2_SYSTEM_AC_LITE_MODE 0x00000001L |
||
7658 | #define ATOM_PM_MISCINFO2_MULTI_DISPLAY_SUPPORT 0x00000002L |
||
7659 | #define ATOM_PM_MISCINFO2_DYNAMIC_BACK_BIAS_EN 0x00000004L |
||
7660 | #define ATOM_PM_MISCINFO2_FS3D_OVERDRIVE_INFO 0x00000008L |
||
7661 | #define ATOM_PM_MISCINFO2_FORCEDLOWPWR_MODE 0x00000010L |
||
7662 | #define ATOM_PM_MISCINFO2_VDDCI_DYNAMIC_VOLTAGE_EN 0x00000020L |
||
1430 | serge | 7663 | #define ATOM_PM_MISCINFO2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver will pack up one with the minior power consumption. |
7664 | //If it's not set in any pp mode, driver will use its default logic to pick a pp mode in video playback |
||
1117 | serge | 7665 | #define ATOM_PM_MISCINFO2_NOT_VALID_ON_DC 0x00000080L |
7666 | #define ATOM_PM_MISCINFO2_STUTTER_MODE_EN 0x00000100L |
||
6104 | serge | 7667 | #define ATOM_PM_MISCINFO2_UVD_SUPPORT_MODE 0x00000200L |
1117 | serge | 7668 | |
1430 | serge | 7669 | //ucTableFormatRevision=1 |
7670 | //ucTableContentRevision=1 |
||
7671 | typedef struct _ATOM_POWERMODE_INFO |
||
7672 | { |
||
7673 | ULONG ulMiscInfo; //The power level should be arranged in ascending order |
||
7674 | ULONG ulReserved1; // must set to 0 |
||
7675 | ULONG ulReserved2; // must set to 0 |
||
6104 | serge | 7676 | USHORT usEngineClock; |
7677 | USHORT usMemoryClock; |
||
1430 | serge | 7678 | UCHAR ucVoltageDropIndex; // index to GPIO table |
7679 | UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate |
||
6104 | serge | 7680 | UCHAR ucMinTemperature; |
7681 | UCHAR ucMaxTemperature; |
||
1430 | serge | 7682 | UCHAR ucNumPciELanes; // number of PCIE lanes |
7683 | }ATOM_POWERMODE_INFO; |
||
1117 | serge | 7684 | |
1430 | serge | 7685 | //ucTableFormatRevision=2 |
7686 | //ucTableContentRevision=1 |
||
7687 | typedef struct _ATOM_POWERMODE_INFO_V2 |
||
7688 | { |
||
7689 | ULONG ulMiscInfo; //The power level should be arranged in ascending order |
||
6104 | serge | 7690 | ULONG ulMiscInfo2; |
7691 | ULONG ulEngineClock; |
||
7692 | ULONG ulMemoryClock; |
||
1430 | serge | 7693 | UCHAR ucVoltageDropIndex; // index to GPIO table |
7694 | UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate |
||
6104 | serge | 7695 | UCHAR ucMinTemperature; |
7696 | UCHAR ucMaxTemperature; |
||
1430 | serge | 7697 | UCHAR ucNumPciELanes; // number of PCIE lanes |
7698 | }ATOM_POWERMODE_INFO_V2; |
||
1117 | serge | 7699 | |
1430 | serge | 7700 | //ucTableFormatRevision=2 |
7701 | //ucTableContentRevision=2 |
||
7702 | typedef struct _ATOM_POWERMODE_INFO_V3 |
||
7703 | { |
||
7704 | ULONG ulMiscInfo; //The power level should be arranged in ascending order |
||
6104 | serge | 7705 | ULONG ulMiscInfo2; |
7706 | ULONG ulEngineClock; |
||
7707 | ULONG ulMemoryClock; |
||
1430 | serge | 7708 | UCHAR ucVoltageDropIndex; // index to Core (VDDC) votage table |
7709 | UCHAR ucSelectedPanel_RefreshRate;// panel refresh rate |
||
6104 | serge | 7710 | UCHAR ucMinTemperature; |
7711 | UCHAR ucMaxTemperature; |
||
1430 | serge | 7712 | UCHAR ucNumPciELanes; // number of PCIE lanes |
7713 | UCHAR ucVDDCI_VoltageDropIndex; // index to VDDCI votage table |
||
7714 | }ATOM_POWERMODE_INFO_V3; |
||
1117 | serge | 7715 | |
1430 | serge | 7716 | |
1117 | serge | 7717 | #define ATOM_MAX_NUMBEROF_POWER_BLOCK 8 |
7718 | |||
7719 | #define ATOM_PP_OVERDRIVE_INTBITMAP_AUXWIN 0x01 |
||
7720 | #define ATOM_PP_OVERDRIVE_INTBITMAP_OVERDRIVE 0x02 |
||
7721 | |||
7722 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM63 0x01 |
||
7723 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1032 0x02 |
||
7724 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ADM1030 0x03 |
||
7725 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_MUA6649 0x04 |
||
7726 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_LM64 0x05 |
||
7727 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_F75375 0x06 |
||
1430 | serge | 7728 | #define ATOM_PP_OVERDRIVE_THERMALCONTROLLER_ASC7512 0x07 // Andigilog |
1117 | serge | 7729 | |
1430 | serge | 7730 | |
7731 | typedef struct _ATOM_POWERPLAY_INFO |
||
7732 | { |
||
6104 | serge | 7733 | ATOM_COMMON_TABLE_HEADER sHeader; |
7734 | UCHAR ucOverdriveThermalController; |
||
7735 | UCHAR ucOverdriveI2cLine; |
||
7736 | UCHAR ucOverdriveIntBitmap; |
||
7737 | UCHAR ucOverdriveControllerAddress; |
||
7738 | UCHAR ucSizeOfPowerModeEntry; |
||
7739 | UCHAR ucNumOfPowerModeEntries; |
||
7740 | ATOM_POWERMODE_INFO asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; |
||
1430 | serge | 7741 | }ATOM_POWERPLAY_INFO; |
1117 | serge | 7742 | |
1430 | serge | 7743 | typedef struct _ATOM_POWERPLAY_INFO_V2 |
7744 | { |
||
6104 | serge | 7745 | ATOM_COMMON_TABLE_HEADER sHeader; |
7746 | UCHAR ucOverdriveThermalController; |
||
7747 | UCHAR ucOverdriveI2cLine; |
||
7748 | UCHAR ucOverdriveIntBitmap; |
||
7749 | UCHAR ucOverdriveControllerAddress; |
||
7750 | UCHAR ucSizeOfPowerModeEntry; |
||
7751 | UCHAR ucNumOfPowerModeEntries; |
||
7752 | ATOM_POWERMODE_INFO_V2 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; |
||
1430 | serge | 7753 | }ATOM_POWERPLAY_INFO_V2; |
6104 | serge | 7754 | |
1430 | serge | 7755 | typedef struct _ATOM_POWERPLAY_INFO_V3 |
7756 | { |
||
6104 | serge | 7757 | ATOM_COMMON_TABLE_HEADER sHeader; |
7758 | UCHAR ucOverdriveThermalController; |
||
7759 | UCHAR ucOverdriveI2cLine; |
||
7760 | UCHAR ucOverdriveIntBitmap; |
||
7761 | UCHAR ucOverdriveControllerAddress; |
||
7762 | UCHAR ucSizeOfPowerModeEntry; |
||
7763 | UCHAR ucNumOfPowerModeEntries; |
||
7764 | ATOM_POWERMODE_INFO_V3 asPowerPlayInfo[ATOM_MAX_NUMBEROF_POWER_BLOCK]; |
||
1430 | serge | 7765 | }ATOM_POWERPLAY_INFO_V3; |
1117 | serge | 7766 | |
7767 | |||
1963 | serge | 7768 | // Following definitions are for compatibility issue in different SW components. |
1117 | serge | 7769 | #define ATOM_MASTER_DATA_TABLE_REVISION 0x01 |
6104 | serge | 7770 | #define Object_Info Object_Header |
1117 | serge | 7771 | #define AdjustARB_SEQ MC_InitParameter |
7772 | #define VRAM_GPIO_DetectionInfo VoltageObjectInfo |
||
6104 | serge | 7773 | #define ASIC_VDDCI_Info ASIC_ProfilingInfo |
1117 | serge | 7774 | #define ASIC_MVDDQ_Info MemoryTrainingInfo |
6104 | serge | 7775 | #define SS_Info PPLL_SS_Info |
1117 | serge | 7776 | #define ASIC_MVDDC_Info ASIC_InternalSS_Info |
7777 | #define DispDevicePriorityInfo SaveRestoreInfo |
||
7778 | #define DispOutInfo TV_VideoMode |
||
7779 | |||
1430 | serge | 7780 | |
1117 | serge | 7781 | #define ATOM_ENCODER_OBJECT_TABLE ATOM_OBJECT_TABLE |
7782 | #define ATOM_CONNECTOR_OBJECT_TABLE ATOM_OBJECT_TABLE |
||
7783 | |||
1430 | serge | 7784 | //New device naming, remove them when both DAL/VBIOS is ready |
1117 | serge | 7785 | #define DFP2I_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS |
7786 | #define DFP2I_OUTPUT_CONTROL_PS_ALLOCATION DFP2I_OUTPUT_CONTROL_PARAMETERS |
||
7787 | |||
7788 | #define DFP1X_OUTPUT_CONTROL_PARAMETERS CRT1_OUTPUT_CONTROL_PARAMETERS |
||
7789 | #define DFP1X_OUTPUT_CONTROL_PS_ALLOCATION DFP1X_OUTPUT_CONTROL_PARAMETERS |
||
7790 | |||
7791 | #define DFP1I_OUTPUT_CONTROL_PARAMETERS DFP1_OUTPUT_CONTROL_PARAMETERS |
||
7792 | #define DFP1I_OUTPUT_CONTROL_PS_ALLOCATION DFP1_OUTPUT_CONTROL_PS_ALLOCATION |
||
7793 | |||
7794 | #define ATOM_DEVICE_DFP1I_SUPPORT ATOM_DEVICE_DFP1_SUPPORT |
||
7795 | #define ATOM_DEVICE_DFP1X_SUPPORT ATOM_DEVICE_DFP2_SUPPORT |
||
7796 | |||
7797 | #define ATOM_DEVICE_DFP1I_INDEX ATOM_DEVICE_DFP1_INDEX |
||
7798 | #define ATOM_DEVICE_DFP1X_INDEX ATOM_DEVICE_DFP2_INDEX |
||
6104 | serge | 7799 | |
1117 | serge | 7800 | #define ATOM_DEVICE_DFP2I_INDEX 0x00000009 |
7801 | #define ATOM_DEVICE_DFP2I_SUPPORT (0x1L << ATOM_DEVICE_DFP2I_INDEX) |
||
7802 | |||
7803 | #define ATOM_S0_DFP1I ATOM_S0_DFP1 |
||
7804 | #define ATOM_S0_DFP1X ATOM_S0_DFP2 |
||
7805 | |||
7806 | #define ATOM_S0_DFP2I 0x00200000L |
||
7807 | #define ATOM_S0_DFP2Ib2 0x20 |
||
7808 | |||
7809 | #define ATOM_S2_DFP1I_DPMS_STATE ATOM_S2_DFP1_DPMS_STATE |
||
7810 | #define ATOM_S2_DFP1X_DPMS_STATE ATOM_S2_DFP2_DPMS_STATE |
||
7811 | |||
7812 | #define ATOM_S2_DFP2I_DPMS_STATE 0x02000000L |
||
7813 | #define ATOM_S2_DFP2I_DPMS_STATEb3 0x02 |
||
7814 | |||
7815 | #define ATOM_S3_DFP2I_ACTIVEb1 0x02 |
||
7816 | |||
6104 | serge | 7817 | #define ATOM_S3_DFP1I_ACTIVE ATOM_S3_DFP1_ACTIVE |
1117 | serge | 7818 | #define ATOM_S3_DFP1X_ACTIVE ATOM_S3_DFP2_ACTIVE |
7819 | |||
7820 | #define ATOM_S3_DFP2I_ACTIVE 0x00000200L |
||
7821 | |||
7822 | #define ATOM_S3_DFP1I_CRTC_ACTIVE ATOM_S3_DFP1_CRTC_ACTIVE |
||
7823 | #define ATOM_S3_DFP1X_CRTC_ACTIVE ATOM_S3_DFP2_CRTC_ACTIVE |
||
7824 | #define ATOM_S3_DFP2I_CRTC_ACTIVE 0x02000000L |
||
7825 | |||
7826 | #define ATOM_S3_DFP2I_CRTC_ACTIVEb3 0x02 |
||
7827 | #define ATOM_S5_DOS_REQ_DFP2Ib1 0x02 |
||
7828 | |||
7829 | #define ATOM_S5_DOS_REQ_DFP2I 0x0200 |
||
7830 | #define ATOM_S6_ACC_REQ_DFP1I ATOM_S6_ACC_REQ_DFP1 |
||
7831 | #define ATOM_S6_ACC_REQ_DFP1X ATOM_S6_ACC_REQ_DFP2 |
||
7832 | |||
7833 | #define ATOM_S6_ACC_REQ_DFP2Ib3 0x02 |
||
7834 | #define ATOM_S6_ACC_REQ_DFP2I 0x02000000L |
||
7835 | |||
6104 | serge | 7836 | #define TMDS1XEncoderControl DVOEncoderControl |
1117 | serge | 7837 | #define DFP1XOutputControl DVOOutputControl |
7838 | |||
7839 | #define ExternalDFPOutputControl DFP1XOutputControl |
||
7840 | #define EnableExternalTMDS_Encoder TMDS1XEncoderControl |
||
7841 | |||
7842 | #define DFP1IOutputControl TMDSAOutputControl |
||
6104 | serge | 7843 | #define DFP2IOutputControl LVTMAOutputControl |
1117 | serge | 7844 | |
7845 | #define DAC1_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS |
||
7846 | #define DAC1_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION |
||
7847 | |||
7848 | #define DAC2_ENCODER_CONTROL_PARAMETERS DAC_ENCODER_CONTROL_PARAMETERS |
||
7849 | #define DAC2_ENCODER_CONTROL_PS_ALLOCATION DAC_ENCODER_CONTROL_PS_ALLOCATION |
||
7850 | |||
7851 | #define ucDac1Standard ucDacStandard |
||
6104 | serge | 7852 | #define ucDac2Standard ucDacStandard |
1117 | serge | 7853 | |
7854 | #define TMDS1EncoderControl TMDSAEncoderControl |
||
7855 | #define TMDS2EncoderControl LVTMAEncoderControl |
||
7856 | |||
7857 | #define DFP1OutputControl TMDSAOutputControl |
||
7858 | #define DFP2OutputControl LVTMAOutputControl |
||
7859 | #define CRT1OutputControl DAC1OutputControl |
||
7860 | #define CRT2OutputControl DAC2OutputControl |
||
7861 | |||
1430 | serge | 7862 | //These two lines will be removed for sure in a few days, will follow up with Michael V. |
1117 | serge | 7863 | #define EnableLVDS_SS EnableSpreadSpectrumOnPPLL |
6104 | serge | 7864 | #define ENABLE_LVDS_SS_PARAMETERS_V3 ENABLE_SPREAD_SPECTRUM_ON_PPLL |
1117 | serge | 7865 | |
1430 | serge | 7866 | //#define ATOM_S2_CRT1_DPMS_STATE 0x00010000L |
7867 | //#define ATOM_S2_LCD1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE |
||
7868 | //#define ATOM_S2_TV1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE |
||
7869 | //#define ATOM_S2_DFP1_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE |
||
7870 | //#define ATOM_S2_CRT2_DPMS_STATE ATOM_S2_CRT1_DPMS_STATE |
||
7871 | |||
7872 | #define ATOM_S6_ACC_REQ_TV2 0x00400000L |
||
7873 | #define ATOM_DEVICE_TV2_INDEX 0x00000006 |
||
7874 | #define ATOM_DEVICE_TV2_SUPPORT (0x1L << ATOM_DEVICE_TV2_INDEX) |
||
7875 | #define ATOM_S0_TV2 0x00100000L |
||
7876 | #define ATOM_S3_TV2_ACTIVE ATOM_S3_DFP6_ACTIVE |
||
7877 | #define ATOM_S3_TV2_CRTC_ACTIVE ATOM_S3_DFP6_CRTC_ACTIVE |
||
7878 | |||
7879 | // |
||
7880 | #define ATOM_S2_CRT1_DPMS_STATE 0x00010000L |
||
7881 | #define ATOM_S2_LCD1_DPMS_STATE 0x00020000L |
||
7882 | #define ATOM_S2_TV1_DPMS_STATE 0x00040000L |
||
7883 | #define ATOM_S2_DFP1_DPMS_STATE 0x00080000L |
||
7884 | #define ATOM_S2_CRT2_DPMS_STATE 0x00100000L |
||
7885 | #define ATOM_S2_LCD2_DPMS_STATE 0x00200000L |
||
7886 | #define ATOM_S2_TV2_DPMS_STATE 0x00400000L |
||
7887 | #define ATOM_S2_DFP2_DPMS_STATE 0x00800000L |
||
7888 | #define ATOM_S2_CV_DPMS_STATE 0x01000000L |
||
7889 | #define ATOM_S2_DFP3_DPMS_STATE 0x02000000L |
||
7890 | #define ATOM_S2_DFP4_DPMS_STATE 0x04000000L |
||
7891 | #define ATOM_S2_DFP5_DPMS_STATE 0x08000000L |
||
7892 | |||
7893 | #define ATOM_S2_CRT1_DPMS_STATEb2 0x01 |
||
7894 | #define ATOM_S2_LCD1_DPMS_STATEb2 0x02 |
||
7895 | #define ATOM_S2_TV1_DPMS_STATEb2 0x04 |
||
7896 | #define ATOM_S2_DFP1_DPMS_STATEb2 0x08 |
||
7897 | #define ATOM_S2_CRT2_DPMS_STATEb2 0x10 |
||
7898 | #define ATOM_S2_LCD2_DPMS_STATEb2 0x20 |
||
7899 | #define ATOM_S2_TV2_DPMS_STATEb2 0x40 |
||
7900 | #define ATOM_S2_DFP2_DPMS_STATEb2 0x80 |
||
7901 | #define ATOM_S2_CV_DPMS_STATEb3 0x01 |
||
7902 | #define ATOM_S2_DFP3_DPMS_STATEb3 0x02 |
||
7903 | #define ATOM_S2_DFP4_DPMS_STATEb3 0x04 |
||
7904 | #define ATOM_S2_DFP5_DPMS_STATEb3 0x08 |
||
7905 | |||
7906 | #define ATOM_S3_ASIC_GUI_ENGINE_HUNGb3 0x20 |
||
7907 | #define ATOM_S3_ALLOW_FAST_PWR_SWITCHb3 0x40 |
||
7908 | #define ATOM_S3_RQST_GPU_USE_MIN_PWRb3 0x80 |
||
7909 | |||
1117 | serge | 7910 | /*********************************************************************************/ |
7911 | |||
1430 | serge | 7912 | #pragma pack() // BIOS data must use byte aligment |
1117 | serge | 7913 | |
2997 | Serge | 7914 | // |
7915 | // AMD ACPI Table |
||
7916 | // |
||
7917 | #pragma pack(1) |
||
7918 | |||
7919 | typedef struct { |
||
7920 | ULONG Signature; |
||
7921 | ULONG TableLength; //Length |
||
7922 | UCHAR Revision; |
||
7923 | UCHAR Checksum; |
||
7924 | UCHAR OemId[6]; |
||
7925 | UCHAR OemTableId[8]; //UINT64 OemTableId; |
||
7926 | ULONG OemRevision; |
||
7927 | ULONG CreatorId; |
||
7928 | ULONG CreatorRevision; |
||
7929 | } AMD_ACPI_DESCRIPTION_HEADER; |
||
7930 | /* |
||
7931 | //EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h |
||
7932 | typedef struct { |
||
7933 | UINT32 Signature; //0x0 |
||
7934 | UINT32 Length; //0x4 |
||
7935 | UINT8 Revision; //0x8 |
||
7936 | UINT8 Checksum; //0x9 |
||
7937 | UINT8 OemId[6]; //0xA |
||
7938 | UINT64 OemTableId; //0x10 |
||
7939 | UINT32 OemRevision; //0x18 |
||
7940 | UINT32 CreatorId; //0x1C |
||
7941 | UINT32 CreatorRevision; //0x20 |
||
7942 | }EFI_ACPI_DESCRIPTION_HEADER; |
||
7943 | */ |
||
7944 | typedef struct { |
||
7945 | AMD_ACPI_DESCRIPTION_HEADER SHeader; |
||
7946 | UCHAR TableUUID[16]; //0x24 |
||
6104 | serge | 7947 | ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure. |
7948 | ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure. |
||
2997 | Serge | 7949 | ULONG Reserved[4]; //0x3C |
7950 | }UEFI_ACPI_VFCT; |
||
7951 | |||
7952 | typedef struct { |
||
7953 | ULONG PCIBus; //0x4C |
||
7954 | ULONG PCIDevice; //0x50 |
||
7955 | ULONG PCIFunction; //0x54 |
||
7956 | USHORT VendorID; //0x58 |
||
7957 | USHORT DeviceID; //0x5A |
||
7958 | USHORT SSVID; //0x5C |
||
7959 | USHORT SSID; //0x5E |
||
7960 | ULONG Revision; //0x60 |
||
7961 | ULONG ImageLength; //0x64 |
||
7962 | }VFCT_IMAGE_HEADER; |
||
7963 | |||
7964 | |||
7965 | typedef struct { |
||
7966 | VFCT_IMAGE_HEADER VbiosHeader; |
||
7967 | UCHAR VbiosContent[1]; |
||
7968 | }GOP_VBIOS_CONTENT; |
||
7969 | |||
7970 | typedef struct { |
||
7971 | VFCT_IMAGE_HEADER Lib1Header; |
||
7972 | UCHAR Lib1Content[1]; |
||
7973 | }GOP_LIB1_CONTENT; |
||
7974 | |||
7975 | #pragma pack() |
||
7976 | |||
7977 | |||
1117 | serge | 7978 | #endif /* _ATOMBIOS_H */ |
5078 | serge | 7979 | |
7980 | #include "pptable.h"><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>><>8)) |
||
7981 |