Subversion Repositories Kolibri OS

/*

 * Copyright (c) 2006 Dave Airlie 

 * Copyright © 2006-2008,2010 Intel Corporation

 *   Jesse Barnes 

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the "Software"),

 * to deal in the Software without restriction, including without limitation

 * the rights to use, copy, modify, merge, publish, distribute, sublicense,

 * and/or sell copies of the Software, and to permit persons to whom the

 * Software is furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice (including the next

 * paragraph) shall be included in all copies or substantial portions of the

 * Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

 * DEALINGS IN THE SOFTWARE.

 *

 * Authors:

 *	Eric Anholt 

 *	Chris Wilson 

 */

#include 

#include 

#include "drmP.h"

#include "drm.h"

#include "intel_drv.h"

//#include "i915_drm.h"

#include "i915_drv.h"

#include 

#define MSEC_PER_SEC    1000L

#define USEC_PER_MSEC   1000L

#define NSEC_PER_USEC   1000L

#define NSEC_PER_MSEC   1000000L

#define USEC_PER_SEC    1000000L

#define NSEC_PER_SEC    1000000000L

#define FSEC_PER_SEC    1000000000000000L

#define HZ_TO_MSEC_MUL32 0xA0000000

#define HZ_TO_MSEC_ADJ32 0x0

#define HZ_TO_MSEC_SHR32 28

#define HZ_TO_MSEC_MUL64 0xA000000000000000

#define HZ_TO_MSEC_ADJ64 0x0

#define HZ_TO_MSEC_SHR64 60

#define MSEC_TO_HZ_MUL32 0xCCCCCCCD

#define MSEC_TO_HZ_ADJ32 0x733333333

#define MSEC_TO_HZ_SHR32 35

#define MSEC_TO_HZ_MUL64 0xCCCCCCCCCCCCCCCD

#define MSEC_TO_HZ_ADJ64 0x73333333333333333

#define MSEC_TO_HZ_SHR64 67

#define HZ_TO_MSEC_NUM 10

#define HZ_TO_MSEC_DEN 1

#define MSEC_TO_HZ_NUM 1

#define MSEC_TO_HZ_DEN 10

#define HZ_TO_USEC_MUL32 0x9C400000

#define HZ_TO_USEC_ADJ32 0x0

#define HZ_TO_USEC_SHR32 18

#define HZ_TO_USEC_MUL64 0x9C40000000000000

#define HZ_TO_USEC_ADJ64 0x0

#define HZ_TO_USEC_SHR64 50

#define USEC_TO_HZ_MUL32 0xD1B71759

#define USEC_TO_HZ_ADJ32 0x1FFF2E48E8A7

#define USEC_TO_HZ_SHR32 45

#define USEC_TO_HZ_MUL64 0xD1B71758E219652C

#define USEC_TO_HZ_ADJ64 0x1FFF2E48E8A71DE69AD4

#define USEC_TO_HZ_SHR64 77

#define HZ_TO_USEC_NUM 10000

#define HZ_TO_USEC_DEN 1

#define USEC_TO_HZ_NUM 1

#define USEC_TO_HZ_DEN 10000

unsigned int inline jiffies_to_usecs(const unsigned long j)

{

#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)

        return (USEC_PER_SEC / HZ) * j;

#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)

        return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);

#else

# if BITS_PER_LONG == 32

        return (HZ_TO_USEC_MUL32 * j) >> HZ_TO_USEC_SHR32;

# else

        return (j * HZ_TO_USEC_NUM) / HZ_TO_USEC_DEN;

# endif

#endif

}

/*

* When we convert to jiffies then we interpret incoming values

* the following way:

*

* - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)

*

* - 'too large' values [that would result in larger than

*   MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.

*

* - all other values are converted to jiffies by either multiplying

*   the input value by a factor or dividing it with a factor

*

* We must also be careful about 32-bit overflows.

*/

unsigned long msecs_to_jiffies(const unsigned int m)

{

        /*

         * Negative value, means infinite timeout:

         */

        if ((int)m < 0)

                return MAX_JIFFY_OFFSET;

#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)

        /*

         * HZ is equal to or smaller than 1000, and 1000 is a nice

         * round multiple of HZ, divide with the factor between them,

         * but round upwards:

         */

        return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);

#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)

        /*

         * HZ is larger than 1000, and HZ is a nice round multiple of

         * 1000 - simply multiply with the factor between them.

         *

         * But first make sure the multiplication result cannot

         * overflow:

         */

        if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))

                return MAX_JIFFY_OFFSET;

        return m * (HZ / MSEC_PER_SEC);

#else

        /*

         * Generic case - multiply, round and divide. But first

         * check that if we are doing a net multiplication, that

         * we wouldn't overflow:

         */

        if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))

                return MAX_JIFFY_OFFSET;

        return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32)

                >> MSEC_TO_HZ_SHR32;

#endif

}

unsigned long usecs_to_jiffies(const unsigned int u)

{

        if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))

                return MAX_JIFFY_OFFSET;

#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)

        return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);

#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)

        return u * (HZ / USEC_PER_SEC);

#else

        return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)

                >> USEC_TO_HZ_SHR32;

#endif

}

/* Intel GPIO access functions */

#define I2C_RISEFALL_TIME 20

static inline struct intel_gmbus *

to_intel_gmbus(struct i2c_adapter *i2c)

{

	return container_of(i2c, struct intel_gmbus, adapter);

}

struct intel_gpio {

	struct i2c_adapter adapter;

	struct i2c_algo_bit_data algo;

	struct drm_i915_private *dev_priv;

	u32 reg;

};

void

intel_i2c_reset(struct drm_device *dev)

{

	struct drm_i915_private *dev_priv = dev->dev_private;

	if (HAS_PCH_SPLIT(dev))

		I915_WRITE(PCH_GMBUS0, 0);

	else

		I915_WRITE(GMBUS0, 0);

}

static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable)

{

	u32 val;

	/* When using bit bashing for I2C, this bit needs to be set to 1 */

	if (!IS_PINEVIEW(dev_priv->dev))

		return;

	val = I915_READ(DSPCLK_GATE_D);

	if (enable)

		val |= DPCUNIT_CLOCK_GATE_DISABLE;

	else

		val &= ~DPCUNIT_CLOCK_GATE_DISABLE;

	I915_WRITE(DSPCLK_GATE_D, val);

}

static u32 get_reserved(struct intel_gpio *gpio)

{

	struct drm_i915_private *dev_priv = gpio->dev_priv;

	struct drm_device *dev = dev_priv->dev;

	u32 reserved = 0;

	/* On most chips, these bits must be preserved in software. */

	if (!IS_I830(dev) && !IS_845G(dev))

		reserved = I915_READ_NOTRACE(gpio->reg) &

					     (GPIO_DATA_PULLUP_DISABLE |

					      GPIO_CLOCK_PULLUP_DISABLE);

	return reserved;

}

static int get_clock(void *data)

{

	struct intel_gpio *gpio = data;

	struct drm_i915_private *dev_priv = gpio->dev_priv;

	u32 reserved = get_reserved(gpio);

	I915_WRITE_NOTRACE(gpio->reg, reserved | GPIO_CLOCK_DIR_MASK);

	I915_WRITE_NOTRACE(gpio->reg, reserved);

	return (I915_READ_NOTRACE(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0;

}

static int get_data(void *data)

{

	struct intel_gpio *gpio = data;

	struct drm_i915_private *dev_priv = gpio->dev_priv;

	u32 reserved = get_reserved(gpio);

	I915_WRITE_NOTRACE(gpio->reg, reserved | GPIO_DATA_DIR_MASK);

	I915_WRITE_NOTRACE(gpio->reg, reserved);

	return (I915_READ_NOTRACE(gpio->reg) & GPIO_DATA_VAL_IN) != 0;

}

static void set_clock(void *data, int state_high)

{

	struct intel_gpio *gpio = data;

	struct drm_i915_private *dev_priv = gpio->dev_priv;

	u32 reserved = get_reserved(gpio);

	u32 clock_bits;

	if (state_high)

		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;

	else

		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |

			GPIO_CLOCK_VAL_MASK;

	I915_WRITE_NOTRACE(gpio->reg, reserved | clock_bits);

	POSTING_READ(gpio->reg);

}

static void set_data(void *data, int state_high)

{

	struct intel_gpio *gpio = data;

	struct drm_i915_private *dev_priv = gpio->dev_priv;

	u32 reserved = get_reserved(gpio);

	u32 data_bits;

	if (state_high)

		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;

	else

		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |

			GPIO_DATA_VAL_MASK;

	I915_WRITE_NOTRACE(gpio->reg, reserved | data_bits);

	POSTING_READ(gpio->reg);

}

static struct i2c_adapter *

intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)

{

	static const int map_pin_to_reg[] = {

		0,

		GPIOB,

		GPIOA,

		GPIOC,

		GPIOD,

		GPIOE,

		0,

		GPIOF,

	};

	struct intel_gpio *gpio;

	if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])

		return NULL;

	gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);

	if (gpio == NULL)

		return NULL;

	gpio->reg = map_pin_to_reg[pin];

	if (HAS_PCH_SPLIT(dev_priv->dev))

		gpio->reg += PCH_GPIOA - GPIOA;

	gpio->dev_priv = dev_priv;

	snprintf(gpio->adapter.name, sizeof(gpio->adapter.name),

		 "i915 GPIO%c", "?BACDE?F"[pin]);

//   gpio->adapter.owner = THIS_MODULE;

	gpio->adapter.algo_data	= &gpio->algo;

	gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;

	gpio->algo.setsda = set_data;

	gpio->algo.setscl = set_clock;

	gpio->algo.getsda = get_data;

	gpio->algo.getscl = get_clock;

	gpio->algo.udelay = I2C_RISEFALL_TIME;

	gpio->algo.timeout = usecs_to_jiffies(2200);

	gpio->algo.data = gpio;

    if (i2c_bit_add_bus(&gpio->adapter))

       goto out_free;

	return &gpio->adapter;

out_free:

	kfree(gpio);

	return NULL;

}

static int

intel_i2c_quirk_xfer(struct drm_i915_private *dev_priv,

		     struct i2c_adapter *adapter,

		     struct i2c_msg *msgs,

		     int num)

{

	struct intel_gpio *gpio = container_of(adapter,

					       struct intel_gpio,

					       adapter);

	int ret;

	intel_i2c_reset(dev_priv->dev);

	intel_i2c_quirk_set(dev_priv, true);

	set_data(gpio, 1);

	set_clock(gpio, 1);

	udelay(I2C_RISEFALL_TIME);

	ret = adapter->algo->master_xfer(adapter, msgs, num);

	set_data(gpio, 1);

	set_clock(gpio, 1);

	intel_i2c_quirk_set(dev_priv, false);

	return ret;

}

static int

gmbus_xfer(struct i2c_adapter *adapter,

	   struct i2c_msg *msgs,

	   int num)

{

	struct intel_gmbus *bus = container_of(adapter,

					       struct intel_gmbus,

					       adapter);

	struct drm_i915_private *dev_priv = adapter->algo_data;

	int i, reg_offset;

	if (bus->force_bit)

		return intel_i2c_quirk_xfer(dev_priv,

					    bus->force_bit, msgs, num);

	reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;

	I915_WRITE(GMBUS0 + reg_offset, bus->reg0);

	for (i = 0; i < num; i++) {

		u16 len = msgs[i].len;

		u8 *buf = msgs[i].buf;

		if (msgs[i].flags & I2C_M_RD) {

			I915_WRITE(GMBUS1 + reg_offset,

				   GMBUS_CYCLE_WAIT | (i + 1 == num ? GMBUS_CYCLE_STOP : 0) |

				   (len << GMBUS_BYTE_COUNT_SHIFT) |

				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |

				   GMBUS_SLAVE_READ | GMBUS_SW_RDY);

			POSTING_READ(GMBUS2+reg_offset);

			do {

				u32 val, loop = 0;

				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))

					goto timeout;

				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)

					goto clear_err;

				val = I915_READ(GMBUS3 + reg_offset);

				do {

					*buf++ = val & 0xff;

					val >>= 8;

				} while (--len && ++loop < 4);

			} while (len);

		} else {

			u32 val, loop;

			val = loop = 0;

			do {

				val |= *buf++ << (8 * loop);

			} while (--len && ++loop < 4);

			I915_WRITE(GMBUS3 + reg_offset, val);

			I915_WRITE(GMBUS1 + reg_offset,

				   (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT) |

				   (msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |

				   (msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |

				   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);

			POSTING_READ(GMBUS2+reg_offset);

			while (len) {

				if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))

					goto timeout;

				if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)

					goto clear_err;

				val = loop = 0;

				do {

					val |= *buf++ << (8 * loop);

				} while (--len && ++loop < 4);

				I915_WRITE(GMBUS3 + reg_offset, val);

				POSTING_READ(GMBUS2+reg_offset);

			}

		}

		if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))

			goto timeout;

		if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)

			goto clear_err;

	}

	goto done;

clear_err:

	/* Toggle the Software Clear Interrupt bit. This has the effect

	 * of resetting the GMBUS controller and so clearing the

	 * BUS_ERROR raised by the slave's NAK.

	 */

	I915_WRITE(GMBUS1 + reg_offset, GMBUS_SW_CLR_INT);

	I915_WRITE(GMBUS1 + reg_offset, 0);

done:

	/* Mark the GMBUS interface as disabled. We will re-enable it at the

	 * start of the next xfer, till then let it sleep.

	 */

	I915_WRITE(GMBUS0 + reg_offset, 0);

	return i;

timeout:

	DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",

		 bus->reg0 & 0xff, bus->adapter.name);

	I915_WRITE(GMBUS0 + reg_offset, 0);

	/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */

	bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);

	if (!bus->force_bit)

		return -ENOMEM;

	return intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num);

}

static u32 gmbus_func(struct i2c_adapter *adapter)

{

	struct intel_gmbus *bus = container_of(adapter,

					       struct intel_gmbus,

					       adapter);

	if (bus->force_bit)

		bus->force_bit->algo->functionality(bus->force_bit);

	return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |

		/* I2C_FUNC_10BIT_ADDR | */

		I2C_FUNC_SMBUS_READ_BLOCK_DATA |

		I2C_FUNC_SMBUS_BLOCK_PROC_CALL);

}

static const struct i2c_algorithm gmbus_algorithm = {

	.master_xfer	= gmbus_xfer,

	.functionality	= gmbus_func

};

/**

 * intel_gmbus_setup - instantiate all Intel i2c GMBuses

 * @dev: DRM device

 */

int intel_setup_gmbus(struct drm_device *dev)

{

	static const char *names[GMBUS_NUM_PORTS] = {

		"disabled",

		"ssc",

		"vga",

		"panel",

		"dpc",

		"dpb",

		"reserved",

		"dpd",

	};

	struct drm_i915_private *dev_priv = dev->dev_private;

	int ret, i;

	dev_priv->gmbus = kcalloc(sizeof(struct intel_gmbus), GMBUS_NUM_PORTS,

				  GFP_KERNEL);

	if (dev_priv->gmbus == NULL)

		return -ENOMEM;

	for (i = 0; i < GMBUS_NUM_PORTS; i++) {

		struct intel_gmbus *bus = &dev_priv->gmbus[i];

//       bus->adapter.owner = THIS_MODULE;

		bus->adapter.class = I2C_CLASS_DDC;

		snprintf(bus->adapter.name,

			 sizeof(bus->adapter.name),

			 "i915 gmbus %s",

			 names[i]);

		bus->adapter.dev.parent = &dev->pdev->dev;

		bus->adapter.algo_data	= dev_priv;

		bus->adapter.algo = &gmbus_algorithm;

//       ret = i2c_add_adapter(&bus->adapter);

//       if (ret)

//           goto err;

		/* By default use a conservative clock rate */

		bus->reg0 = i | GMBUS_RATE_100KHZ;

		/* XXX force bit banging until GMBUS is fully debugged */

		bus->force_bit = intel_gpio_create(dev_priv, i);

	}

	intel_i2c_reset(dev_priv->dev);

	return 0;

err:

//   while (--i) {

//       struct intel_gmbus *bus = &dev_priv->gmbus[i];

//       i2c_del_adapter(&bus->adapter);

//   }

	kfree(dev_priv->gmbus);

	dev_priv->gmbus = NULL;

	return ret;

}

void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)

{

	struct intel_gmbus *bus = to_intel_gmbus(adapter);

	/* speed:

	 * 0x0 = 100 KHz

	 * 0x1 = 50 KHz

	 * 0x2 = 400 KHz

	 * 0x3 = 1000 Khz

	 */

	bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | (speed << 8);

}

void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)

{

	struct intel_gmbus *bus = to_intel_gmbus(adapter);

	if (force_bit) {

		if (bus->force_bit == NULL) {

			struct drm_i915_private *dev_priv = adapter->algo_data;

			bus->force_bit = intel_gpio_create(dev_priv,

							   bus->reg0 & 0xff);

		}

	} else {

		if (bus->force_bit) {

//           i2c_del_adapter(bus->force_bit);

			kfree(bus->force_bit);

			bus->force_bit = NULL;

		}

	}

}

void intel_teardown_gmbus(struct drm_device *dev)

{

	struct drm_i915_private *dev_priv = dev->dev_private;

	int i;

	if (dev_priv->gmbus == NULL)

		return;

	for (i = 0; i < GMBUS_NUM_PORTS; i++) {

		struct intel_gmbus *bus = &dev_priv->gmbus[i];

		if (bus->force_bit) {

//           i2c_del_adapter(bus->force_bit);

			kfree(bus->force_bit);

		}

//       i2c_del_adapter(&bus->adapter);

	}

	kfree(dev_priv->gmbus);

	dev_priv->gmbus = NULL;

}