Subversion Repositories Kolibri OS

/*

 * Copyright 2006 Dave Airlie 

 * Copyright © 2006-2007 Intel Corporation

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the "Software"),

 * to deal in the Software without restriction, including without limitation

 * the rights to use, copy, modify, merge, publish, distribute, sublicense,

 * and/or sell copies of the Software, and to permit persons to whom the

 * Software is furnished to do so, subject to the following conditions:

 *

 * The above copyright notice and this permission notice (including the next

 * paragraph) shall be included in all copies or substantial portions of the

 * Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER

 * DEALINGS IN THE SOFTWARE.

 *

 * Authors:

 *	Eric Anholt 

 */

#include 

#include 

#include 

#include 

#include "intel_drv.h"

#include 

#include "i915_drv.h"

#include "dvo.h"

#define SIL164_ADDR	0x38

#define CH7xxx_ADDR	0x76

#define TFP410_ADDR	0x38

#define NS2501_ADDR     0x38

static const struct intel_dvo_device intel_dvo_devices[] = {

	{

		.type = INTEL_DVO_CHIP_TMDS,

		.name = "sil164",

		.dvo_reg = DVOC,

		.slave_addr = SIL164_ADDR,

		.dev_ops = &sil164_ops,

	},

	{

		.type = INTEL_DVO_CHIP_TMDS,

		.name = "ch7xxx",

		.dvo_reg = DVOC,

		.slave_addr = CH7xxx_ADDR,

		.dev_ops = &ch7xxx_ops,

	},

	{

		.type = INTEL_DVO_CHIP_LVDS,

		.name = "ivch",

		.dvo_reg = DVOA,

		.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */

		.dev_ops = &ivch_ops,

	},

	{

		.type = INTEL_DVO_CHIP_TMDS,

		.name = "tfp410",

		.dvo_reg = DVOC,

		.slave_addr = TFP410_ADDR,

		.dev_ops = &tfp410_ops,

	},

	{

		.type = INTEL_DVO_CHIP_LVDS,

		.name = "ch7017",

		.dvo_reg = DVOC,

		.slave_addr = 0x75,

		.gpio = GMBUS_PORT_DPB,

		.dev_ops = &ch7017_ops,

	},

	{

	        .type = INTEL_DVO_CHIP_TMDS,

		.name = "ns2501",

		.dvo_reg = DVOC,

		.slave_addr = NS2501_ADDR,

		.dev_ops = &ns2501_ops,

	}

};

struct intel_dvo {

	struct intel_encoder base;

	struct intel_dvo_device dev;

	struct drm_display_mode *panel_fixed_mode;

	bool panel_wants_dither;

};

static struct intel_dvo *enc_to_intel_dvo(struct drm_encoder *encoder)

{

	return container_of(encoder, struct intel_dvo, base.base);

}

static struct intel_dvo *intel_attached_dvo(struct drm_connector *connector)

{

	return container_of(intel_attached_encoder(connector),

			    struct intel_dvo, base);

}

static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)

{

	struct intel_dvo *intel_dvo = intel_attached_dvo(&connector->base);

	return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);

}

static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,

				   enum pipe *pipe)

{

	struct drm_device *dev = encoder->base.dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);

	u32 tmp;

	tmp = I915_READ(intel_dvo->dev.dvo_reg);

	if (!(tmp & DVO_ENABLE))

		return false;

	*pipe = PORT_TO_PIPE(tmp);

	return true;

}

static void intel_disable_dvo(struct intel_encoder *encoder)

{

	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);

	u32 dvo_reg = intel_dvo->dev.dvo_reg;

	u32 temp = I915_READ(dvo_reg);

	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);

	I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);

	I915_READ(dvo_reg);

}

static void intel_enable_dvo(struct intel_encoder *encoder)

{

	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(&encoder->base);

	u32 dvo_reg = intel_dvo->dev.dvo_reg;

	u32 temp = I915_READ(dvo_reg);

		I915_WRITE(dvo_reg, temp | DVO_ENABLE);

		I915_READ(dvo_reg);

	intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);

}

static void intel_dvo_dpms(struct drm_connector *connector, int mode)

{

	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);

	struct drm_crtc *crtc;

	/* dvo supports only 2 dpms states. */

	if (mode != DRM_MODE_DPMS_ON)

		mode = DRM_MODE_DPMS_OFF;

	if (mode == connector->dpms)

		return;

	connector->dpms = mode;

	/* Only need to change hw state when actually enabled */

	crtc = intel_dvo->base.base.crtc;

	if (!crtc) {

		intel_dvo->base.connectors_active = false;

		return;

	}

	if (mode == DRM_MODE_DPMS_ON) {

		intel_dvo->base.connectors_active = true;

		intel_crtc_update_dpms(crtc);

		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);

	} else {

		intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);

		intel_dvo->base.connectors_active = false;

		intel_crtc_update_dpms(crtc);

	}

	intel_modeset_check_state(connector->dev);

}

static int intel_dvo_mode_valid(struct drm_connector *connector,

				struct drm_display_mode *mode)

{

	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);

	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)

		return MODE_NO_DBLESCAN;

	/* XXX: Validate clock range */

	if (intel_dvo->panel_fixed_mode) {

		if (mode->hdisplay > intel_dvo->panel_fixed_mode->hdisplay)

			return MODE_PANEL;

		if (mode->vdisplay > intel_dvo->panel_fixed_mode->vdisplay)

			return MODE_PANEL;

	}

	return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);

}

static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,

				 const struct drm_display_mode *mode,

				 struct drm_display_mode *adjusted_mode)

{

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);

	/* If we have timings from the BIOS for the panel, put them in

	 * to the adjusted mode.  The CRTC will be set up for this mode,

	 * with the panel scaling set up to source from the H/VDisplay

	 * of the original mode.

	 */

	if (intel_dvo->panel_fixed_mode != NULL) {

#define C(x) adjusted_mode->x = intel_dvo->panel_fixed_mode->x

		C(hdisplay);

		C(hsync_start);

		C(hsync_end);

		C(htotal);

		C(vdisplay);

		C(vsync_start);

		C(vsync_end);

		C(vtotal);

		C(clock);

#undef C

	}

	if (intel_dvo->dev.dev_ops->mode_fixup)

		return intel_dvo->dev.dev_ops->mode_fixup(&intel_dvo->dev, mode, adjusted_mode);

	return true;

}

static void intel_dvo_mode_set(struct drm_encoder *encoder,

			       struct drm_display_mode *mode,

			       struct drm_display_mode *adjusted_mode)

{

	struct drm_device *dev = encoder->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);

	int pipe = intel_crtc->pipe;

	u32 dvo_val;

	u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;

	int dpll_reg = DPLL(pipe);

	switch (dvo_reg) {

	case DVOA:

	default:

		dvo_srcdim_reg = DVOA_SRCDIM;

		break;

	case DVOB:

		dvo_srcdim_reg = DVOB_SRCDIM;

		break;

	case DVOC:

		dvo_srcdim_reg = DVOC_SRCDIM;

		break;

	}

	intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev, mode, adjusted_mode);

	/* Save the data order, since I don't know what it should be set to. */

	dvo_val = I915_READ(dvo_reg) &

		  (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);

	dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |

		   DVO_BLANK_ACTIVE_HIGH;

	if (pipe == 1)

		dvo_val |= DVO_PIPE_B_SELECT;

	dvo_val |= DVO_PIPE_STALL;

	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)

		dvo_val |= DVO_HSYNC_ACTIVE_HIGH;

	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)

		dvo_val |= DVO_VSYNC_ACTIVE_HIGH;

	I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);

	/*I915_WRITE(DVOB_SRCDIM,

	  (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |

	  (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/

	I915_WRITE(dvo_srcdim_reg,

		   (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |

		   (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));

	/*I915_WRITE(DVOB, dvo_val);*/

	I915_WRITE(dvo_reg, dvo_val);

}

/**

 * Detect the output connection on our DVO device.

 *

 * Unimplemented.

 */

static enum drm_connector_status

intel_dvo_detect(struct drm_connector *connector, bool force)

{

	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);

	return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);

}

static int intel_dvo_get_modes(struct drm_connector *connector)

{

	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);

	struct drm_i915_private *dev_priv = connector->dev->dev_private;

	/* We should probably have an i2c driver get_modes function for those

	 * devices which will have a fixed set of modes determined by the chip

	 * (TV-out, for example), but for now with just TMDS and LVDS,

	 * that's not the case.

	 */

	intel_ddc_get_modes(connector,

			    intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));

	if (!list_empty(&connector->probed_modes))

		return 1;

	if (intel_dvo->panel_fixed_mode != NULL) {

		struct drm_display_mode *mode;

		mode = drm_mode_duplicate(connector->dev, intel_dvo->panel_fixed_mode);

		if (mode) {

			drm_mode_probed_add(connector, mode);

			return 1;

		}

	}

	return 0;

}

static void intel_dvo_destroy(struct drm_connector *connector)

{

	drm_sysfs_connector_remove(connector);

	drm_connector_cleanup(connector);

	kfree(connector);

}

static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {

	.mode_fixup = intel_dvo_mode_fixup,

	.mode_set = intel_dvo_mode_set,

	.disable = intel_encoder_noop,

};

static const struct drm_connector_funcs intel_dvo_connector_funcs = {

	.dpms = intel_dvo_dpms,

	.detect = intel_dvo_detect,

	.destroy = intel_dvo_destroy,

	.fill_modes = drm_helper_probe_single_connector_modes,

};

static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {

	.mode_valid = intel_dvo_mode_valid,

	.get_modes = intel_dvo_get_modes,

	.best_encoder = intel_best_encoder,

};

static void intel_dvo_enc_destroy(struct drm_encoder *encoder)

{

	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);

	if (intel_dvo->dev.dev_ops->destroy)

		intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);

	kfree(intel_dvo->panel_fixed_mode);

	intel_encoder_destroy(encoder);

}

static const struct drm_encoder_funcs intel_dvo_enc_funcs = {

	.destroy = intel_dvo_enc_destroy,

};

/**

 * Attempts to get a fixed panel timing for LVDS (currently only the i830).

 *

 * Other chips with DVO LVDS will need to extend this to deal with the LVDS

 * chip being on DVOB/C and having multiple pipes.

 */

static struct drm_display_mode *

intel_dvo_get_current_mode(struct drm_connector *connector)

{

	struct drm_device *dev = connector->dev;

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);

	uint32_t dvo_val = I915_READ(intel_dvo->dev.dvo_reg);

	struct drm_display_mode *mode = NULL;

	/* If the DVO port is active, that'll be the LVDS, so we can pull out

	 * its timings to get how the BIOS set up the panel.

	 */

	if (dvo_val & DVO_ENABLE) {

		struct drm_crtc *crtc;

		int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;

		crtc = intel_get_crtc_for_pipe(dev, pipe);

		if (crtc) {

			mode = intel_crtc_mode_get(dev, crtc);

			if (mode) {

				mode->type |= DRM_MODE_TYPE_PREFERRED;

				if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)

					mode->flags |= DRM_MODE_FLAG_PHSYNC;

				if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)

					mode->flags |= DRM_MODE_FLAG_PVSYNC;

			}

		}

	}

	return mode;

}

void intel_dvo_init(struct drm_device *dev)

{

	struct drm_i915_private *dev_priv = dev->dev_private;

	struct intel_encoder *intel_encoder;

	struct intel_dvo *intel_dvo;

	struct intel_connector *intel_connector;

	int i;

	int encoder_type = DRM_MODE_ENCODER_NONE;

	intel_dvo = kzalloc(sizeof(struct intel_dvo), GFP_KERNEL);

	if (!intel_dvo)

		return;

	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);

	if (!intel_connector) {

		kfree(intel_dvo);

		return;

	}

	intel_encoder = &intel_dvo->base;

	drm_encoder_init(dev, &intel_encoder->base,

			 &intel_dvo_enc_funcs, encoder_type);

	intel_encoder->disable = intel_disable_dvo;

	intel_encoder->enable = intel_enable_dvo;

	intel_encoder->get_hw_state = intel_dvo_get_hw_state;

	intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;

	/* Now, try to find a controller */

	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {

		struct drm_connector *connector = &intel_connector->base;

		const struct intel_dvo_device *dvo = &intel_dvo_devices[i];

		struct i2c_adapter *i2c;

		int gpio;

		/* Allow the I2C driver info to specify the GPIO to be used in

		 * special cases, but otherwise default to what's defined

		 * in the spec.

		 */

		if (intel_gmbus_is_port_valid(dvo->gpio))

			gpio = dvo->gpio;

		else if (dvo->type == INTEL_DVO_CHIP_LVDS)

			gpio = GMBUS_PORT_SSC;

		else

			gpio = GMBUS_PORT_DPB;

		/* Set up the I2C bus necessary for the chip we're probing.

		 * It appears that everything is on GPIOE except for panels

		 * on i830 laptops, which are on GPIOB (DVOA).

		 */

		i2c = intel_gmbus_get_adapter(dev_priv, gpio);

		intel_dvo->dev = *dvo;

		if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))

			continue;

		intel_encoder->type = INTEL_OUTPUT_DVO;

		intel_encoder->crtc_mask = (1 << 0) | (1 << 1);

		switch (dvo->type) {

		case INTEL_DVO_CHIP_TMDS:

			intel_encoder->cloneable = true;

			drm_connector_init(dev, connector,

					   &intel_dvo_connector_funcs,

					   DRM_MODE_CONNECTOR_DVII);

			encoder_type = DRM_MODE_ENCODER_TMDS;

			break;

		case INTEL_DVO_CHIP_LVDS:

			intel_encoder->cloneable = false;

			drm_connector_init(dev, connector,

					   &intel_dvo_connector_funcs,

					   DRM_MODE_CONNECTOR_LVDS);

			encoder_type = DRM_MODE_ENCODER_LVDS;

			break;

		}

		drm_connector_helper_add(connector,

					 &intel_dvo_connector_helper_funcs);

		connector->display_info.subpixel_order = SubPixelHorizontalRGB;

		connector->interlace_allowed = false;

		connector->doublescan_allowed = false;

		drm_encoder_helper_add(&intel_encoder->base,

				       &intel_dvo_helper_funcs);

		intel_connector_attach_encoder(intel_connector, intel_encoder);

		if (dvo->type == INTEL_DVO_CHIP_LVDS) {

			/* For our LVDS chipsets, we should hopefully be able

			 * to dig the fixed panel mode out of the BIOS data.

			 * However, it's in a different format from the BIOS

			 * data on chipsets with integrated LVDS (stored in AIM

			 * headers, likely), so for now, just get the current

			 * mode being output through DVO.

			 */

			intel_dvo->panel_fixed_mode =

				intel_dvo_get_current_mode(connector);

			intel_dvo->panel_wants_dither = true;

		}

		drm_sysfs_connector_add(connector);

		return;

	}

	drm_encoder_cleanup(&intel_encoder->base);

	kfree(intel_dvo);

	kfree(intel_connector);

}