Subversion Repositories Kolibri OS

/*

 * Copyright © 2014 Intel Corporation

 *

 * Permission is hereby granted, free of charge, to any person obtaining a

 * copy of this software and associated documentation files (the

 * "Software"), to deal in the Software without restriction, including

 * without limitation the rights to use, copy, modify, merge, publish,

 * distribute, sub license, and/or sell copies of the Software, and to

 * permit persons to whom the Software is furnished to do so, subject to

 * the following conditions:

 *

 * The above copyright notice and this permission notice (including the

 * next paragraph) shall be included in all copies or substantial portions

 * of the Software.

 *

 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS

 * IN THE SOFTWARE.

 */

#include "i915_drv.h"

struct i915_params i915 __read_mostly = {

    .modeset = 1,

	.panel_ignore_lid = 1,

	.semaphores = -1,

	.lvds_channel_mode = 0,

	.panel_use_ssc = -1,

	.vbt_sdvo_panel_type = -1,

    .enable_rc6 = 0,

	.enable_fbc = -1,

	.enable_execlists = -1,

	.enable_hangcheck = true,

	.enable_ppgtt = -1,

	.enable_psr = 0,

	.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),

	.disable_power_well = -1,

	.enable_ips = 1,

	.fastboot = 0,

	.prefault_disable = 0,

	.load_detect_test = 0,

	.reset = true,

	.invert_brightness = 0,

	.disable_display = 0,

	.enable_cmd_parser = 0,

	.disable_vtd_wa = 1,

	.use_mmio_flip = 0,

	.mmio_debug = 0,

	.verbose_state_checks = 1,

	.nuclear_pageflip = 0,

	.edp_vswing = 0,

	.enable_guc_submission = false,

	.guc_log_level = -1,

    .fbsize = 16,

    .log_file = NULL,

    .cmdline_mode = NULL,

};

module_param_named(modeset, i915.modeset, int, 0400);

MODULE_PARM_DESC(modeset,

	"Use kernel modesetting [KMS] (0=disable, "

	"1=on, -1=force vga console preference [default])");

module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);

MODULE_PARM_DESC(panel_ignore_lid,

	"Override lid status (0=autodetect, 1=autodetect disabled [default], "

	"-1=force lid closed, -2=force lid open)");

module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);

MODULE_PARM_DESC(semaphores,

	"Use semaphores for inter-ring sync "

	"(default: -1 (use per-chip defaults))");

module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);

MODULE_PARM_DESC(enable_rc6,

	"Enable power-saving render C-state 6. "

	"Different stages can be selected via bitmask values "

	"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "

	"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "

	"default: -1 (use per-chip default)");

module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);

MODULE_PARM_DESC(enable_fbc,

	"Enable frame buffer compression for power savings "

	"(default: -1 (use per-chip default))");

module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);

MODULE_PARM_DESC(lvds_channel_mode,

	 "Specify LVDS channel mode "

	 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");

module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);

MODULE_PARM_DESC(lvds_use_ssc,

	"Use Spread Spectrum Clock with panels [LVDS/eDP] "

	"(default: auto from VBT)");

module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);

MODULE_PARM_DESC(vbt_sdvo_panel_type,

	"Override/Ignore selection of SDVO panel mode in the VBT "

	"(-2=ignore, -1=auto [default], index in VBT BIOS table)");

module_param_named_unsafe(reset, i915.reset, bool, 0600);

MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");

module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);

MODULE_PARM_DESC(enable_hangcheck,

	"Periodically check GPU activity for detecting hangs. "

	"WARNING: Disabling this can cause system wide hangs. "

	"(default: true)");

module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);

MODULE_PARM_DESC(enable_ppgtt,

	"Override PPGTT usage. "

	"(-1=auto [default], 0=disabled, 1=aliasing, 2=full)");

module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);

MODULE_PARM_DESC(enable_execlists,

	"Override execlists usage. "

	"(-1=auto [default], 0=disabled, 1=enabled)");

module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);

MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");

module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);

MODULE_PARM_DESC(preliminary_hw_support,

	"Enable preliminary hardware support.");

module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0600);

MODULE_PARM_DESC(disable_power_well,

	"Disable display power wells when possible "

	"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");

module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);

MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");

module_param_named(fastboot, i915.fastboot, bool, 0600);

MODULE_PARM_DESC(fastboot,

	"Try to skip unnecessary mode sets at boot time (default: false)");

module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);

MODULE_PARM_DESC(prefault_disable,

	"Disable page prefaulting for pread/pwrite/reloc (default:false). "

	"For developers only.");

module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);

MODULE_PARM_DESC(load_detect_test,

	"Force-enable the VGA load detect code for testing (default:false). "

	"For developers only.");

module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);

MODULE_PARM_DESC(invert_brightness,

	"Invert backlight brightness "

	"(-1 force normal, 0 machine defaults, 1 force inversion), please "

	"report PCI device ID, subsystem vendor and subsystem device ID "

	"to dri-devel@lists.freedesktop.org, if your machine needs it. "

	"It will then be included in an upcoming module version.");

module_param_named(disable_display, i915.disable_display, bool, 0600);

MODULE_PARM_DESC(disable_display, "Disable display (default: false)");

module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);

MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");

module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);

MODULE_PARM_DESC(enable_cmd_parser,

		 "Enable command parsing (1=enabled [default], 0=disabled)");

module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);

MODULE_PARM_DESC(use_mmio_flip,

		 "use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");

module_param_named(mmio_debug, i915.mmio_debug, int, 0600);

MODULE_PARM_DESC(mmio_debug,

	"Enable the MMIO debug code for the first N failures (default: off). "

	"This may negatively affect performance.");

module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);

MODULE_PARM_DESC(verbose_state_checks,

	"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");

module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);

MODULE_PARM_DESC(nuclear_pageflip,

		 "Force atomic modeset functionality; asynchronous mode is not yet supported. (default: false).");

/* WA to get away with the default setting in VBT for early platforms.Will be removed */

module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);

MODULE_PARM_DESC(edp_vswing,

		 "Ignore/Override vswing pre-emph table selection from VBT "

		 "(0=use value from vbt [default], 1=low power swing(200mV),"

		 "2=default swing(400mV))");

module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400);

MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)");

module_param_named(guc_log_level, i915.guc_log_level, int, 0400);

MODULE_PARM_DESC(guc_log_level,

	"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");