Subversion Repositories Kolibri OS

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;                                                                 ;;

;; Copyright (C) KolibriOS team 2004-2018. All rights reserved.    ;;

;; Distributed under terms of the GNU General Public License       ;;

;;                                                                 ;;

;;  Broadcom NetXtreme 57xx driver for KolibriOS                   ;;

;;                                                                 ;;

;;                                                                 ;;

;;          GNU GENERAL PUBLIC LICENSE                             ;;

;;             Version 2, June 1991                                ;;

;;                                                                 ;;

;; Broadcom's programmers's manual for the BCM57xx                 ;;

;; http://www.broadcom.com/collateral/pg/57XX-PG105-R.pdf          ;;

;;                                                                 ;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

format PE DLL native

entry START

        CURRENT_API             = 0x0200

        COMPATIBLE_API          = 0x0100

        API_VERSION             = (COMPATIBLE_API shl 16) + CURRENT_API

        MAX_DEVICES             = 16

        __DEBUG__               = 1

        __DEBUG_LEVEL__         = 2

section '.flat' readable writable executable

include '../proc32.inc'

include '../struct.inc'

include '../macros.inc'

include '../fdo.inc'

include '../netdrv.inc'

struct  device          ETH_DEVICE

        mmio_addr       dd ?

        pci_bus         dd ?

        pci_dev         dd ?

        irq_line        db ?

        cur_tx          dd ?

        last_tx         dd ?

        rb 0x100 - ($ and 0xff) ; align 256

        rx_desc         rd 256/8

        rb 0x100 - ($ and 0xff) ; align 256

        tx_desc         rd 256/8

ends

;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;                        ;;

;; proc START             ;;

;;                        ;;

;; (standard driver proc) ;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc START c, reason:dword, cmdline:dword

        cmp     [reason], DRV_ENTRY

        jne     .fail

        DEBUGF  1,"Loading driver\n"

        invoke  RegService, my_service, service_proc

        ret

  .fail:

        xor     eax, eax

        ret

endp

;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;                        ;;

;; proc SERVICE_PROC      ;;

;;                        ;;

;; (standard driver proc) ;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc service_proc stdcall, ioctl:dword

        mov     edx, [ioctl]

        mov     eax, [edx + IOCTL.io_code]

;------------------------------------------------------

        cmp     eax, 0 ;SRV_GETVERSION

        jne     @F

        cmp     [edx + IOCTL.out_size], 4

        jb      .fail

        mov     eax, [edx + IOCTL.output]

        mov     [eax], dword API_VERSION

        xor     eax, eax

        ret

;------------------------------------------------------

  @@:

        cmp     eax, 1 ;SRV_HOOK

        jne     .fail

        cmp     [edx + IOCTL.inp_size], 3               ; Data input must be at least 3 bytes

        jb      .fail

        mov     eax, [edx + IOCTL.input]

        cmp     byte [eax], 1                           ; 1 means device number and bus number (pci) are given

        jne     .fail                                   ; other types arent supported for this card yet

; check if the device is already listed

        mov     esi, device_list

        mov     ecx, [devices]

        test    ecx, ecx

        jz      .firstdevice

;        mov     eax, [edx + IOCTL.input]                      ; get the pci bus and device numbers

        mov     ax, [eax+1]                             ;

  .nextdevice:

        mov     ebx, [esi]

        cmp     al, byte [ebx + device.pci_bus]

        jne     .next

        cmp     ah, byte [ebx + device.pci_dev]

        je      .find_devicenum                         ; Device is already loaded, let's find it's device number

  .next:

        add     esi, 4

        loop    .nextdevice

; This device doesnt have its own eth_device structure yet, lets create one

  .firstdevice:

        cmp     [devices], MAX_DEVICES                  ; First check if the driver can handle one more card

        jae     .fail

        allocate_and_clear ebx, sizeof.device, .fail      ; Allocate the buffer for device structure

; Fill in the direct call addresses into the struct

        mov     [ebx + device.reset], reset

        mov     [ebx + device.transmit], transmit

        mov     [ebx + device.unload], unload

        mov     [ebx + device.name], my_service

; save the pci bus and device numbers

        mov     eax, [edx + IOCTL.input]

        movzx   ecx, byte [eax+1]

        mov     [ebx + device.pci_bus], ecx

        movzx   ecx, byte [eax+2]

        mov     [ebx + device.pci_dev], ecx

; Now, it's time to find the base mmio addres of the PCI device

        stdcall PCI_find_mmio, [ebx + device.pci_bus], [ebx + device.pci_dev]

        test    eax, eax

        jz      .destroy

; Create virtual mapping of the physical memory

        invoke  MapIoMem, eax, 10000h, PG_SW+PG_NOCACHE

        mov     [ebx + device.mmio_addr], eax

; We've found the mmio address, find IRQ now

        invoke  PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line

        mov     [ebx + device.irq_line], al

        DEBUGF  1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\

        [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.mmio_addr]:8

; Ok, the eth_device structure is ready, let's probe the device

        call    probe                                                   ; this function will output in eax

        test    eax, eax

        jnz     .err                                                    ; If an error occured, exit

        mov     eax, [devices]                                          ; Add the device structure to our device list

        mov     [device_list+4*eax], ebx                                ; (IRQ handler uses this list to find device)

        inc     [devices]                                               ;

        mov     [ebx + device.type], NET_TYPE_ETH

        invoke  NetRegDev

        cmp     eax, -1

        je      .destroy

        ret

; If the device was already loaded, find the device number and return it in eax

  .find_devicenum:

        DEBUGF  1,"Trying to find device number of already registered device\n"

        invoke  NetPtrToNum                                             ; This kernel procedure converts a pointer to device struct in ebx

                                                                        ; into a device number in edi

        mov     eax, edi                                                ; Application wants it in eax instead

        DEBUGF  1,"Kernel says: %u\n", eax

        ret

; If an error occured, remove all allocated data and exit (returning -1 in eax)

  .destroy:

        ; todo: reset device into virgin state

  .err:

        invoke  KernelFree, ebx

  .fail:

        or      eax, -1

        ret

;------------------------------------------------------

endp

;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;

;;                                                                        ;;

;;        Actual Hardware dependent code starts here                      ;;

;;                                                                        ;;

;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;

unload:

        ; TODO: (in this particular order)

        ;

        ; - Stop the device

        ; - Detach int handler

        ; - Remove device from local list (device_list)

        ; - call unregister function in kernel

        ; - Remove all allocated structures and buffers the card used

        or      eax, -1

ret

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;

;;  probe: enables the device (if it really is BCM57XX)

;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

probe:

        DEBUGF  1,"Probe\n"

; Make the device a bus master

        invoke  PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command

        or      al, PCI_CMD_MASTER

        invoke  PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax

        ; TODO: validate the device

reset:

        DEBUGF  1,"Reset\n"

        movzx   eax, [ebx + device.irq_line]

        DEBUGF  1,"Attaching int handler to irq %x\n", eax:1

        invoke  AttachIntHandler, eax, int_handler, ebx

        test    eax, eax

        jnz     @f

        DEBUGF  1,"\nCould not attach int handler!\n"

;        or      eax, -1

;        ret

  @@:

        call    read_mac

; Set the mtu, kernel will be able to send now

        mov     [ebx + device.mtu], 1514

; Set link state to unknown

        mov     [ebx + device.state], ETH_LINK_UNKNOWN

        ret

align 4

read_mac:

        DEBUGF  1,"Read MAC\n"

        mov     esi, [ebx + device.mmio_addr]

        lea     edi, [ebx + device.mac]

        movsd

        movsw

  .mac_ok:

        DEBUGF  1,"MAC = %x-%x-%x-%x-%x-%x\n",\

        [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,[ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2

        ret

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;                                         ;;

;; Transmit                                ;;

;;                                         ;;

;; In: buffer pointer in [esp+4]           ;;

;;     size of buffer in [esp+8]           ;;

;;     pointer to device structure in ebx  ;;

;;                                         ;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

proc transmit stdcall bufferptr, buffersize

        pushf

        cli

        DEBUGF  1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize]

        mov     eax, [bufferptr]

        DEBUGF  1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\

        [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\

        [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\

        [eax+13]:2,[eax+12]:2

        cmp     [buffersize], 1514

        ja      .fail

        cmp     [buffersize], 60

        jb      .fail

; Update stats

        inc     [ebx + device.packets_tx]

        mov     eax, [buffersize]

        add     dword[ebx + device.bytes_tx], eax

        adc     dword[ebx + device.bytes_tx + 4], 0

        DEBUGF  1,"Transmit OK\n"

        popf

        xor     eax, eax

        ret

  .fail:

        DEBUGF  2,"Transmit failed\n"

        invoke  KernelFree, [bufferptr]

        popf

        or      eax, -1

        ret

endp

;;;;;;;;;;;;;;;;;;;;;;;

;;                   ;;

;; Interrupt handler ;;

;;                   ;;

;;;;;;;;;;;;;;;;;;;;;;;

align 4

int_handler:

        push    ebx esi edi

        DEBUGF  1,"INT\n"

;-------------------------------------------

; Find pointer of device wich made IRQ occur

        mov     ecx, [devices]

        test    ecx, ecx

        jz      .nothing

        mov     esi, device_list

  .nextdevice:

        mov     ebx, [esi]

;        mov     edi, [ebx + device.mmio_addr]

;        mov     eax, [edi + REG_ICR]

        test    eax, eax

        jnz     .got_it

  .continue:

        add     esi, 4

        dec     ecx

        jnz     .nextdevice

  .nothing:

        pop     edi esi ebx

        xor     eax, eax

        ret

  .got_it:

        DEBUGF  1,"Device: %x Status: %x ", ebx, eax

        pop     edi esi ebx

        xor     eax, eax

        inc     eax

        ret

; End of code

data fixups

end data

include '../peimport.inc'

my_service      db 'BCM57XX',0                   ; max 16 chars include zero

include_debug_strings                           ; All data wich FDO uses will be included here

align 4

devices         dd 0

device_list     rd MAX_DEVICES                  ; This list contains all pointers to device structures the driver is handling