Rev 4470 | Rev 4580 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
3545 | hidnplayr | 1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
2 | ;; ;; |
||
4467 | hidnplayr | 3 | ;; Copyright (C) KolibriOS team 2004-2014. All rights reserved. ;; |
3545 | hidnplayr | 4 | ;; Distributed under terms of the GNU General Public License ;; |
5 | ;; ;; |
||
6 | ;; MTD80x driver for KolibriOS ;; |
||
7 | ;; ;; |
||
8 | ;; Based on mtd80x.c from the etherboot project ;; |
||
9 | ;; ;; |
||
10 | ;; Written by hidnplayr@kolibrios.org ;; |
||
11 | ;; ;; |
||
12 | ;; GNU GENERAL PUBLIC LICENSE ;; |
||
13 | ;; Version 2, June 1991 ;; |
||
14 | ;; ;; |
||
15 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
16 | |||
17 | format MS COFF |
||
18 | |||
19 | API_VERSION = 0x01000100 |
||
20 | DRIVER_VERSION = 5 |
||
21 | |||
22 | MAX_DEVICES = 16 |
||
23 | |||
24 | DEBUG = 1 |
||
25 | __DEBUG__ = 1 |
||
26 | __DEBUG_LEVEL__ = 2 |
||
27 | |||
4576 | hidnplayr | 28 | NUM_TX_DESC = 6 |
29 | NUM_RX_DESC = 12 |
||
3545 | hidnplayr | 30 | |
4467 | hidnplayr | 31 | include '../struct.inc' |
32 | include '../macros.inc' |
||
3545 | hidnplayr | 33 | include '../proc32.inc' |
34 | include '../imports.inc' |
||
35 | include '../fdo.inc' |
||
36 | include '../netdrv.inc' |
||
37 | |||
38 | public START |
||
39 | public service_proc |
||
40 | public version |
||
41 | |||
42 | |||
43 | ; for different PHY |
||
44 | |||
45 | MysonPHY = 1 |
||
46 | AhdocPHY = 2 |
||
47 | SeeqPHY = 3 |
||
48 | MarvellPHY = 4 |
||
49 | Myson981 = 5 |
||
50 | LevelOnePHY = 6 |
||
51 | OtherPHY = 10 |
||
52 | |||
53 | ; Offsets to the Command and Status Registers. |
||
54 | |||
55 | PAR0 = 0x0 ; physical address 0-3 |
||
56 | PAR1 = 0x04 ; physical address 4-5 |
||
57 | MAR0 = 0x08 ; multicast address 0-3 |
||
58 | MAR1 = 0x0C ; multicast address 4-7 |
||
59 | FAR0 = 0x10 ; flow-control address 0-3 |
||
60 | FAR1 = 0x14 ; flow-control address 4-5 |
||
61 | TCRRCR = 0x18 ; receive & transmit configuration |
||
62 | BCR = 0x1C ; bus command |
||
63 | TXPDR = 0x20 ; transmit polling demand |
||
64 | RXPDR = 0x24 ; receive polling demand |
||
65 | RXCWP = 0x28 ; receive current word pointer |
||
66 | TXLBA = 0x2C ; transmit list base address |
||
67 | RXLBA = 0x30 ; receive list base address |
||
68 | ISR = 0x34 ; interrupt status |
||
69 | IMR = 0x38 ; interrupt mask |
||
70 | FTH = 0x3C ; flow control high/low threshold |
||
71 | MANAGEMENT = 0x40 ; bootrom/eeprom and mii management |
||
72 | TALLY = 0x44 ; tally counters for crc and mpa |
||
73 | TSR = 0x48 ; tally counter for transmit status |
||
74 | BMCRSR = 0x4c ; basic mode control and status |
||
75 | PHYIDENTIFIER = 0x50 ; phy identifier |
||
76 | ANARANLPAR = 0x54 ; auto-negotiation advertisement and link partner ability |
||
77 | ANEROCR = 0x58 ; auto-negotiation expansion and pci conf. |
||
78 | BPREMRPSR = 0x5c ; bypass & receive error mask and phy status |
||
79 | |||
80 | ; Bits in the interrupt status/enable registers. |
||
81 | |||
82 | RFCON = 0x00020000 ; receive flow control xon packet |
||
83 | RFCOFF = 0x00010000 ; receive flow control xoff packet |
||
84 | LSCStatus = 0x00008000 ; link status change |
||
85 | ANCStatus = 0x00004000 ; autonegotiation completed |
||
86 | FBE = 0x00002000 ; fatal bus error |
||
87 | FBEMask = 0x00001800 ; mask bit12-11 |
||
88 | ParityErr = 0x00000000 ; parity error |
||
89 | TargetErr = 0x00001000 ; target abort |
||
90 | MasterErr = 0x00000800 ; master error |
||
91 | TUNF = 0x00000400 ; transmit underflow |
||
92 | ROVF = 0x00000200 ; receive overflow |
||
93 | ETI = 0x00000100 ; transmit early int |
||
94 | ERI = 0x00000080 ; receive early int |
||
95 | CNTOVF = 0x00000040 ; counter overflow |
||
96 | RBU = 0x00000020 ; receive buffer unavailable |
||
97 | TBU = 0x00000010 ; transmit buffer unavilable |
||
98 | TI = 0x00000008 ; transmit interrupt |
||
99 | RI = 0x00000004 ; receive interrupt |
||
100 | RxErr = 0x00000002 ; receive error |
||
101 | |||
102 | ; Bits in the NetworkConfig register. |
||
103 | |||
104 | RxModeMask = 0xe0 |
||
105 | AcceptAllPhys = 0x80 ; promiscuous mode |
||
106 | AcceptBroadcast = 0x40 ; accept broadcast |
||
107 | AcceptMulticast = 0x20 ; accept mutlicast |
||
108 | AcceptRunt = 0x08 ; receive runt pkt |
||
109 | ALP = 0x04 ; receive long pkt |
||
110 | AcceptErr = 0x02 ; receive error pkt |
||
111 | |||
112 | AcceptMyPhys = 0x00000000 |
||
113 | RxEnable = 0x00000001 |
||
114 | RxFlowCtrl = 0x00002000 |
||
115 | TxEnable = 0x00040000 |
||
116 | TxModeFDX = 0x00100000 |
||
117 | TxThreshold = 0x00e00000 |
||
118 | |||
119 | PS1000 = 0x00010000 |
||
120 | PS10 = 0x00080000 |
||
121 | FD = 0x00100000 |
||
122 | |||
123 | |||
124 | ; Bits in network_desc.status |
||
125 | |||
126 | RXOWN = 0x80000000 ; own bit |
||
127 | FLNGMASK = 0x0fff0000 ; frame length |
||
128 | FLNGShift = 16 |
||
129 | MARSTATUS = 0x00004000 ; multicast address received |
||
130 | BARSTATUS = 0x00002000 ; broadcast address received |
||
131 | PHYSTATUS = 0x00001000 ; physical address received |
||
132 | RXFSD = 0x00000800 ; first descriptor |
||
133 | RXLSD = 0x00000400 ; last descriptor |
||
134 | ErrorSummary = 0x80 ; error summary |
||
135 | RUNT = 0x40 ; runt packet received |
||
136 | LONG = 0x20 ; long packet received |
||
137 | FAE = 0x10 ; frame align error |
||
138 | CRC = 0x08 ; crc error |
||
139 | RXER = 0x04 ; receive error |
||
140 | |||
141 | ; rx_desc_control_bits |
||
142 | |||
143 | RXIC = 0x00800000 ; interrupt control |
||
144 | RBSShift = 0 |
||
145 | |||
146 | ; tx_desc_status_bits |
||
147 | |||
148 | TXOWN = 0x80000000 ; own bit |
||
149 | JABTO = 0x00004000 ; jabber timeout |
||
150 | CSL = 0x00002000 ; carrier sense lost |
||
151 | LC = 0x00001000 ; late collision |
||
152 | EC = 0x00000800 ; excessive collision |
||
153 | UDF = 0x00000400 ; fifo underflow |
||
154 | DFR = 0x00000200 ; deferred |
||
155 | HF = 0x00000100 ; heartbeat fail |
||
156 | NCRMask = 0x000000ff ; collision retry count |
||
157 | NCRShift = 0 |
||
158 | |||
159 | ; tx_desc_control_bits |
||
160 | |||
161 | TXIC = 0x80000000 ; interrupt control |
||
162 | ETIControl = 0x40000000 ; early transmit interrupt |
||
163 | TXLD = 0x20000000 ; last descriptor |
||
164 | TXFD = 0x10000000 ; first descriptor |
||
165 | CRCEnable = 0x08000000 ; crc control |
||
166 | PADEnable = 0x04000000 ; padding control |
||
167 | RetryTxLC = 0x02000000 ; retry late collision |
||
168 | PKTSMask = 0x3ff800 ; packet size bit21-11 |
||
169 | PKTSShift = 11 |
||
170 | TBSMask = 0x000007ff ; transmit buffer bit 10-0 |
||
171 | TBSShift = 0 |
||
172 | |||
173 | ; BootROM/EEPROM/MII Management Register |
||
174 | |||
175 | MASK_MIIR_MII_READ = 0x00000000 |
||
176 | MASK_MIIR_MII_WRITE = 0x00000008 |
||
177 | MASK_MIIR_MII_MDO = 0x00000004 |
||
178 | MASK_MIIR_MII_MDI = 0x00000002 |
||
179 | MASK_MIIR_MII_MDC = 0x00000001 |
||
180 | |||
181 | ; ST+OP+PHYAD+REGAD+TA |
||
182 | |||
183 | OP_READ = 0x6000 ; ST:01+OP:10+PHYAD+REGAD+TA:Z0 |
||
184 | OP_WRITE = 0x5002 ; ST:01+OP:01+PHYAD+REGAD+TA:10 |
||
185 | |||
186 | ; ------------------------------------------------------------------------- |
||
187 | ; Constants for Myson PHY |
||
188 | ; ------------------------------------------------------------------------- |
||
189 | |||
190 | MysonPHYID = 0xd0000302 |
||
191 | MysonPHYID0 = 0x0302 |
||
192 | StatusRegister = 18 |
||
193 | SPEED100 = 0x0400 ; bit10 |
||
194 | FULLMODE = 0x0800 ; bit11 |
||
195 | |||
196 | ; ------------------------------------------------------------------------- |
||
197 | ; Constants for Seeq 80225 PHY |
||
198 | ; ------------------------------------------------------------------------- |
||
199 | |||
200 | SeeqPHYID0 = 0x0016 |
||
201 | MIIRegister18 = 18 |
||
202 | SPD_DET_100 = 0x80 |
||
203 | DPLX_DET_FULL = 0x40 |
||
204 | |||
205 | ; ------------------------------------------------------------------------- |
||
206 | ; Constants for Ahdoc 101 PHY |
||
207 | ; ------------------------------------------------------------------------- |
||
208 | |||
209 | AhdocPHYID0 = 0x0022 |
||
210 | DiagnosticReg = 18 |
||
211 | DPLX_FULL = 0x0800 |
||
212 | Speed_100 = 0x0400 |
||
213 | |||
214 | ; -------------------------------------------------------------------------- |
||
215 | ; Constants |
||
216 | ; -------------------------------------------------------------------------- |
||
217 | |||
218 | MarvellPHYID0 = 0x0141 |
||
219 | LevelOnePHYID0 = 0x0013 |
||
220 | |||
221 | MII1000BaseTControlReg = 9 |
||
222 | MII1000BaseTStatusReg = 10 |
||
223 | SpecificReg = 17 |
||
224 | |||
225 | ; for 1000BaseT Control Register |
||
226 | |||
227 | PHYAbletoPerform1000FullDuplex = 0x0200 |
||
228 | PHYAbletoPerform1000HalfDuplex = 0x0100 |
||
229 | PHY1000AbilityMask = 0x300 |
||
230 | |||
231 | ; for phy specific status register, marvell phy. |
||
232 | |||
233 | SpeedMask = 0x0c000 |
||
234 | Speed_1000M = 0x08000 |
||
235 | Speed_100M = 0x4000 |
||
236 | Speed_10M = 0 |
||
237 | Full_Duplex = 0x2000 |
||
238 | |||
239 | ; for phy specific status register, levelone phy |
||
240 | |||
241 | LXT1000_100M = 0x08000 |
||
242 | LXT1000_1000M = 0x0c000 |
||
243 | LXT1000_Full = 0x200 |
||
244 | |||
245 | ; for PHY |
||
246 | |||
247 | LinkIsUp = 0x0004 |
||
248 | LinkIsUp2 = 0x00040000 |
||
249 | |||
250 | |||
251 | |||
252 | virtual at 0 |
||
253 | |||
254 | mtd_desc: |
||
255 | .status dd ? |
||
256 | .control dd ? |
||
257 | .buffer dd ? |
||
258 | .next_desc dd ? |
||
259 | |||
260 | .next_desc_logical dd ? |
||
261 | .skbuff dd ? |
||
262 | |||
263 | .reserved1 dd ? |
||
264 | .reserved2 dd ? |
||
265 | |||
266 | .size = $ |
||
267 | |||
268 | end virtual |
||
269 | |||
270 | |||
271 | virtual at ebx |
||
272 | |||
273 | device: |
||
274 | |||
275 | ETH_DEVICE |
||
276 | |||
277 | .tx_desc rb NUM_TX_DESC*mtd_desc.size |
||
278 | .rx_desc rb NUM_RX_DESC*mtd_desc.size |
||
279 | |||
280 | .io_addr dd ? |
||
281 | .pci_bus dd ? |
||
282 | .pci_dev dd ? |
||
283 | .irq_line db ? |
||
284 | .dev_id dw ? |
||
285 | |||
286 | .flags dd ? |
||
287 | |||
288 | .crvalue dd ? |
||
289 | .bcrvalue dd ? |
||
290 | |||
291 | .cur_rx dd ? |
||
292 | .cur_tx dd ? |
||
293 | |||
294 | ; These values are keep track of the transceiver/media in use. |
||
295 | |||
296 | .linkok dd ? |
||
297 | .line_speed dd ? |
||
298 | .duplexmode dd ? |
||
299 | .default_port dd ? |
||
300 | .PHYType dd ? |
||
301 | |||
302 | ; MII transceiver section. |
||
303 | |||
304 | .mii_cnt dd ? ; MII device addresses. |
||
305 | .phys db ? ; MII device addresses. |
||
306 | |||
307 | device_size = $ - device |
||
308 | |||
309 | end virtual |
||
310 | |||
311 | |||
312 | |||
313 | section '.flat' code readable align 16 |
||
314 | |||
315 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
316 | ;; ;; |
||
317 | ;; proc START ;; |
||
318 | ;; ;; |
||
319 | ;; (standard driver proc) ;; |
||
320 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
321 | |||
322 | align 4 |
||
323 | proc START stdcall, state:dword |
||
324 | |||
325 | cmp [state], 1 |
||
326 | jne .exit |
||
327 | |||
328 | .entry: |
||
329 | |||
4470 | hidnplayr | 330 | DEBUGF 2,"Loading driver\n" |
3545 | hidnplayr | 331 | stdcall RegService, my_service, service_proc |
332 | ret |
||
333 | |||
334 | .fail: |
||
335 | .exit: |
||
336 | xor eax, eax |
||
337 | ret |
||
338 | |||
339 | endp |
||
340 | |||
341 | |||
342 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
343 | ;; ;; |
||
344 | ;; proc SERVICE_PROC ;; |
||
345 | ;; ;; |
||
346 | ;; (standard driver proc) ;; |
||
347 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
348 | |||
349 | align 4 |
||
350 | proc service_proc stdcall, ioctl:dword |
||
351 | |||
352 | mov edx, [ioctl] |
||
4470 | hidnplayr | 353 | mov eax, [edx + IOCTL.io_code] |
3545 | hidnplayr | 354 | |
355 | ;------------------------------------------------------ |
||
356 | |||
357 | cmp eax, 0 ;SRV_GETVERSION |
||
358 | jne @F |
||
359 | |||
4470 | hidnplayr | 360 | cmp [edx + IOCTL.out_size], 4 |
3545 | hidnplayr | 361 | jb .fail |
4470 | hidnplayr | 362 | mov eax, [edx + IOCTL.output] |
3545 | hidnplayr | 363 | mov [eax], dword API_VERSION |
364 | |||
365 | xor eax, eax |
||
366 | ret |
||
367 | |||
368 | ;------------------------------------------------------ |
||
369 | @@: |
||
370 | cmp eax, 1 ;SRV_HOOK |
||
371 | jne .fail |
||
372 | |||
4470 | hidnplayr | 373 | cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes |
3545 | hidnplayr | 374 | jb .fail |
375 | |||
4470 | hidnplayr | 376 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 377 | cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given |
378 | jne .fail ; other types arent supported for this card yet |
||
379 | |||
380 | ; check if the device is already listed |
||
381 | |||
382 | mov esi, device_list |
||
383 | mov ecx, [devices] |
||
384 | test ecx, ecx |
||
385 | jz .firstdevice |
||
386 | |||
4470 | hidnplayr | 387 | ; mov eax, [edx + IOCTL.input] ; get the pci bus and device numbers |
388 | mov ax, [eax+1] ; |
||
3545 | hidnplayr | 389 | .nextdevice: |
390 | mov ebx, [esi] |
||
391 | cmp al, byte[device.pci_bus] |
||
392 | jne @f |
||
393 | cmp ah, byte[device.pci_dev] |
||
394 | je .find_devicenum ; Device is already loaded, let's find it's device number |
||
395 | @@: |
||
396 | add esi, 4 |
||
397 | loop .nextdevice |
||
398 | |||
399 | |||
400 | ; This device doesnt have its own eth_device structure yet, lets create one |
||
401 | .firstdevice: |
||
402 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
||
403 | jae .fail |
||
404 | |||
405 | allocate_and_clear ebx, device_size, .fail |
||
406 | |||
407 | ; Fill in the direct call addresses into the struct |
||
408 | |||
409 | mov [device.reset], reset |
||
410 | mov [device.transmit], transmit |
||
411 | mov [device.unload], unload |
||
412 | mov [device.name], my_service |
||
413 | |||
414 | ; save the pci bus and device numbers |
||
415 | |||
4470 | hidnplayr | 416 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 417 | movzx ecx, byte[eax+1] |
418 | mov [device.pci_bus], ecx |
||
419 | movzx ecx, byte[eax+2] |
||
420 | mov [device.pci_dev], ecx |
||
421 | |||
422 | ; Now, it's time to find the base io addres of the PCI device |
||
423 | |||
424 | PCI_find_io |
||
425 | |||
426 | ; We've found the io address, find IRQ now |
||
427 | |||
428 | PCI_find_irq |
||
429 | |||
430 | DEBUGF 2,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\ |
||
431 | [device.pci_dev]:1,[device.pci_bus]:1,[device.irq_line]:1,[device.io_addr]:8 |
||
432 | |||
433 | ; Ok, the eth_device structure is ready, let's probe the device |
||
434 | ; Because initialization fires IRQ, IRQ handler must be aware of this device |
||
435 | mov eax, [devices] ; Add the device structure to our device list |
||
436 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
||
437 | inc [devices] ; |
||
438 | |||
439 | call probe ; this function will output in eax |
||
440 | test eax, eax |
||
441 | jnz .err2 ; If an error occured, exit |
||
442 | |||
443 | mov [device.type], NET_TYPE_ETH |
||
444 | call NetRegDev |
||
445 | |||
446 | cmp eax, -1 |
||
447 | je .destroy |
||
448 | |||
449 | ret |
||
450 | |||
451 | ; If the device was already loaded, find the device number and return it in eax |
||
452 | |||
453 | .find_devicenum: |
||
454 | DEBUGF 2,"Trying to find device number of already registered device\n" |
||
455 | call NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
||
456 | ; into a device number in edi |
||
457 | mov eax, edi ; Application wants it in eax instead |
||
458 | DEBUGF 2,"Kernel says: %u\n", eax |
||
459 | ret |
||
460 | |||
461 | ; If an error occured, remove all allocated data and exit (returning -1 in eax) |
||
462 | |||
463 | .destroy: |
||
464 | ; todo: reset device into virgin state |
||
465 | |||
466 | .err2: |
||
467 | dec [devices] |
||
468 | .err: |
||
469 | DEBUGF 2,"removing device structure\n" |
||
470 | stdcall KernelFree, ebx |
||
471 | .fail: |
||
472 | or eax, -1 |
||
473 | ret |
||
474 | |||
475 | ;------------------------------------------------------ |
||
476 | endp |
||
477 | |||
478 | |||
479 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
480 | ;; ;; |
||
481 | ;; Actual Hardware dependent code starts here ;; |
||
482 | ;; ;; |
||
483 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
484 | |||
485 | |||
486 | |||
487 | align 4 |
||
488 | unload: |
||
489 | ; TODO: (in this particular order) |
||
490 | ; |
||
491 | ; - Stop the device |
||
492 | |||
493 | ; /* Disable Tx Rx*/ |
||
494 | ; outl( mtdx.crvalue & (~TxEnable) & (~RxEnable), mtdx.ioaddr + TCRRCR ); |
||
495 | ; |
||
496 | ; /* Reset the chip to erase previous misconfiguration. */ |
||
497 | ; mtd_reset(nic); |
||
498 | |||
499 | ; - Detach int handler |
||
500 | ; - Remove device from local list (device_list) |
||
501 | ; - call unregister function in kernel |
||
502 | ; - Remove all allocated structures and buffers the card used |
||
503 | |||
504 | or eax,-1 |
||
505 | |||
506 | ret |
||
507 | |||
508 | |||
509 | ;------- |
||
510 | ; |
||
511 | ; PROBE |
||
512 | ; |
||
513 | ;------- |
||
514 | align 4 |
||
515 | probe: |
||
516 | |||
4470 | hidnplayr | 517 | DEBUGF 2,"Probing device\n" |
3545 | hidnplayr | 518 | |
519 | PCI_make_bus_master |
||
520 | |||
521 | stdcall PciRead32, [device.pci_bus], [device.pci_dev], 0 |
||
522 | |||
523 | cmp ax, 0x1516 |
||
524 | jne .notfound |
||
525 | shr eax, 16 |
||
526 | mov [device.dev_id], ax |
||
527 | |||
528 | cmp ax, 0x0800 |
||
529 | je .has_mii_xcvr |
||
530 | |||
531 | cmp ax, 0x0803 |
||
532 | je .has_chip_xcvr |
||
533 | |||
534 | cmp ax, 0x0891 |
||
535 | je .has_mii_xcvr |
||
536 | |||
537 | .notfound: |
||
538 | DEBUGF 1,"Device not supported!\n" |
||
539 | xor eax, eax |
||
540 | dec eax |
||
541 | ret |
||
542 | |||
543 | .has_chip_xcvr: |
||
544 | DEBUGF 1,"Device has chip xcvr\n" |
||
545 | |||
546 | jmp .xcvr_set |
||
547 | |||
548 | .has_mii_xcvr: |
||
549 | DEBUGF 1,"Device has mii xcvr\n" |
||
550 | |||
551 | .xcvr_set: |
||
552 | |||
553 | call read_mac |
||
554 | |||
555 | ; Reset the chip to erase previous misconfiguration. |
||
556 | |||
557 | set_io 0 |
||
558 | set_io BCR |
||
559 | xor eax, eax |
||
560 | inc eax |
||
561 | out dx, eax |
||
562 | |||
563 | ; find the connected MII xcvrs |
||
564 | |||
565 | cmp [device.dev_id], 0x0803 |
||
566 | je .is_803 |
||
567 | |||
568 | ; int phy, phy_idx = 0; |
||
569 | ; |
||
570 | ; for (phy = 1; phy < 32 && phy_idx < 1; phy++) { |
||
571 | ; int mii_status = mdio_read(nic, phy, 1); |
||
572 | ; |
||
573 | ; if (mii_status != 0xffff && mii_status != 0x0000) { |
||
574 | ; mtdx.phys[phy_idx] = phy; |
||
575 | ; |
||
576 | ; DBG ( "%s: MII PHY found at address %d, status " |
||
577 | ; "0x%4.4x.\n", mtdx.nic_name, phy, mii_status ); |
||
578 | ; /* get phy type */ |
||
579 | ; { |
||
580 | ; unsigned int data; |
||
581 | ; |
||
582 | ; data = mdio_read(nic, mtdx.phys[phy_idx], 2); |
||
583 | ; if (data equ= SeeqPHYID0) |
||
584 | ; mtdx.PHYType = SeeqPHY; |
||
585 | ; else if (data equ= AhdocPHYID0) |
||
586 | ; mtdx.PHYType = AhdocPHY; |
||
587 | ; else if (data equ= MarvellPHYID0) |
||
588 | ; mtdx.PHYType = MarvellPHY; |
||
589 | ; else if (data equ= MysonPHYID0) |
||
590 | ; mtdx.PHYType = Myson981; |
||
591 | ; else if (data equ= LevelOnePHYID0) |
||
592 | ; mtdx.PHYType = LevelOnePHY; |
||
593 | ; else |
||
594 | ; mtdx.PHYType = OtherPHY; |
||
595 | ; } |
||
596 | ; phy_idx++; |
||
597 | ; } |
||
598 | ; } |
||
599 | ; |
||
600 | ; mtdx.mii_cnt = phy_idx; |
||
601 | ; if (phy_idx equ= 0) { |
||
602 | ; printf("%s: MII PHY not found -- this device may " |
||
603 | ; "not operate correctly.\n", mtdx.nic_name); |
||
604 | ; } |
||
605 | |||
606 | jmp .no_803 |
||
607 | |||
608 | .is_803: |
||
609 | |||
610 | mov [device.phys], 32 |
||
611 | |||
612 | ; get phy type |
||
613 | set_io 0 |
||
614 | set_io PHYIDENTIFIER |
||
615 | in eax, dx |
||
616 | |||
617 | cmp eax, MysonPHYID |
||
618 | jne @f |
||
619 | |||
620 | mov [device.PHYType], MysonPHY |
||
621 | DEBUGF 1,"MysonPHY\n" |
||
622 | jmp .no_803 |
||
623 | |||
624 | @@: |
||
625 | mov [device.PHYType], OtherPHY |
||
626 | DEBUGF 1,"OtherPHY\n" |
||
627 | |||
628 | .no_803: |
||
629 | |||
630 | ;------- |
||
631 | ; |
||
632 | ; RESET |
||
633 | ; |
||
634 | ;------- |
||
635 | align 4 |
||
636 | reset: |
||
637 | |||
4470 | hidnplayr | 638 | DEBUGF 1,"Resetting\n" |
3545 | hidnplayr | 639 | |
640 | ;-------------------------------- |
||
641 | ; insert irq handler on given irq |
||
642 | |||
643 | movzx eax, [device.irq_line] |
||
644 | DEBUGF 1,"Attaching int handler to irq %x\n", eax:1 |
||
645 | stdcall AttachIntHandler, eax, int_handler, dword 0 |
||
646 | test eax, eax |
||
647 | jnz @f |
||
4470 | hidnplayr | 648 | DEBUGF 1,"Could not attach int handler!\n" |
4576 | hidnplayr | 649 | or eax, -1 |
650 | ret |
||
3545 | hidnplayr | 651 | @@: |
652 | |||
653 | ; Reset the chip to erase previous misconfiguration. |
||
654 | |||
655 | set_io 0 |
||
656 | set_io BCR |
||
657 | xor eax, eax |
||
658 | inc eax |
||
659 | out dx, eax |
||
660 | |||
661 | call init_ring |
||
662 | |||
663 | ; Initialize other registers. |
||
664 | ; Configure the PCI bus bursts and FIFO thresholds. |
||
665 | |||
4576 | hidnplayr | 666 | mov [device.bcrvalue], 0x10 ; little-endian, 8 burst length |
667 | mov [device.crvalue], 0xa00 ; 128 burst length |
||
3545 | hidnplayr | 668 | |
669 | cmp [device.dev_id], 0x891 |
||
670 | jne @f |
||
671 | or [device.bcrvalue], 0x200 ; set PROG bit |
||
672 | or [device.crvalue], 0x02000000 ; set enhanced bit |
||
673 | @@: |
||
674 | |||
675 | or [device.crvalue], RxEnable + TxThreshold + TxEnable |
||
676 | |||
677 | call set_rx_mode |
||
678 | |||
679 | set_io 0 |
||
680 | set_io BCR |
||
681 | mov eax, [device.bcrvalue] |
||
682 | out dx, eax |
||
683 | |||
684 | set_io TCRRCR |
||
685 | mov eax, [device.crvalue] |
||
686 | out dx, eax |
||
687 | |||
688 | call getlinkstatus |
||
689 | call getlinktype |
||
690 | |||
691 | ; Restart Rx engine if stopped. |
||
692 | |||
693 | set_io 0 |
||
694 | set_io RXPDR |
||
695 | xor eax, eax |
||
696 | out dx, eax |
||
697 | |||
698 | ; Enable interrupts |
||
699 | |||
700 | set_io 0 |
||
701 | set_io ISR |
||
4576 | hidnplayr | 702 | mov eax, FBE or TUNF or CNTOVF or RBU or TI or RI |
3545 | hidnplayr | 703 | out dx, eax |
704 | set_io IMR |
||
705 | out dx, eax |
||
706 | |||
707 | ; clear packet/byte counters |
||
708 | |||
709 | xor eax, eax |
||
710 | lea edi, [device.bytes_tx] |
||
711 | mov ecx, 6 |
||
712 | rep stosd |
||
713 | |||
714 | mov [device.mtu], 1514 |
||
715 | |||
716 | ; Set link state to unknown |
||
717 | mov [device.state], ETH_LINK_UNKOWN |
||
718 | |||
719 | xor eax, eax |
||
720 | ret |
||
721 | |||
722 | |||
723 | |||
724 | |||
725 | align 4 |
||
726 | init_ring: |
||
727 | |||
728 | DEBUGF 1,"initializing rx and tx ring\n" |
||
729 | |||
730 | ; Initialize all Rx descriptors |
||
731 | |||
732 | lea esi, [device.rx_desc] |
||
733 | mov [device.cur_rx], esi |
||
734 | mov ecx, NUM_RX_DESC |
||
735 | .rx_desc_loop: |
||
736 | mov [esi + mtd_desc.status], RXOWN |
||
737 | mov [esi + mtd_desc.control], 1536 shl RBSShift |
||
738 | |||
739 | lea eax, [esi + mtd_desc.size] |
||
740 | mov [esi + mtd_desc.next_desc_logical], eax |
||
741 | push ecx esi |
||
742 | GetRealAddr |
||
743 | mov [esi + mtd_desc.next_desc], eax |
||
744 | |||
745 | stdcall KernelAlloc, 1536 |
||
746 | pop esi |
||
747 | push esi |
||
748 | mov [esi + mtd_desc.skbuff], eax |
||
749 | call GetPgAddr |
||
750 | pop esi ecx |
||
751 | mov [esi + mtd_desc.buffer], eax |
||
752 | |||
753 | add esi, mtd_desc.size |
||
754 | loop .rx_desc_loop |
||
755 | |||
756 | ; Mark the last entry as wrapping the ring. |
||
757 | |||
758 | lea eax, [device.rx_desc] |
||
759 | mov [esi - mtd_desc.size + mtd_desc.next_desc_logical], eax |
||
760 | push esi |
||
761 | GetRealAddr |
||
762 | pop esi |
||
763 | mov [esi - mtd_desc.size + mtd_desc.next_desc], eax |
||
764 | |||
765 | set_io 0 |
||
766 | set_io RXLBA |
||
767 | out dx, eax |
||
768 | |||
769 | ; Initialize all Tx descriptors |
||
770 | |||
771 | lea esi, [device.tx_desc] |
||
772 | mov [device.cur_tx], esi |
||
773 | mov ecx, NUM_TX_DESC |
||
774 | .tx_desc_loop: |
||
775 | mov [esi + mtd_desc.status], 0 |
||
776 | |||
777 | lea eax, [esi + mtd_desc.size] |
||
778 | mov [esi + mtd_desc.next_desc_logical], eax |
||
779 | push ecx esi |
||
780 | GetRealAddr |
||
781 | pop esi ecx |
||
782 | mov [esi + mtd_desc.next_desc], eax |
||
4576 | hidnplayr | 783 | mov [esi + mtd_desc.skbuff], 0 |
3545 | hidnplayr | 784 | add esi, mtd_desc.size |
785 | loop .tx_desc_loop |
||
786 | |||
787 | ; Mark the last entry as wrapping the ring. |
||
788 | |||
789 | lea eax, [device.tx_desc] |
||
790 | mov [esi - mtd_desc.size + mtd_desc.next_desc_logical], eax |
||
791 | push esi |
||
792 | GetRealAddr |
||
793 | pop esi |
||
794 | mov [esi - mtd_desc.size + mtd_desc.next_desc], eax |
||
795 | |||
796 | set_io 0 |
||
797 | set_io TXLBA |
||
798 | out dx, eax |
||
799 | |||
800 | ret |
||
801 | |||
802 | |||
803 | align 4 |
||
804 | set_rx_mode: |
||
805 | |||
806 | DEBUGF 1,"Setting RX mode\n" |
||
807 | |||
808 | ; Too many to match, or accept all multicasts. |
||
809 | |||
810 | set_io 0 |
||
811 | set_io MAR0 |
||
812 | xor eax, eax |
||
813 | not eax |
||
814 | out dx, eax |
||
815 | set_io MAR1 |
||
816 | out dx, eax |
||
817 | |||
818 | and [device.crvalue], not (RxModeMask) |
||
819 | or [device.crvalue], AcceptBroadcast + AcceptMulticast + AcceptMyPhys |
||
820 | |||
821 | ret |
||
822 | |||
823 | |||
824 | align 4 |
||
825 | getlinkstatus: |
||
826 | |||
827 | DEBUGF 1,"Getting link status\n" |
||
828 | |||
829 | mov [device.linkok], 0 |
||
830 | |||
831 | cmp [device.PHYType], MysonPHY |
||
832 | jne .no_myson_phy |
||
833 | |||
834 | set_io 0 |
||
835 | set_io BMCRSR |
||
836 | mov ecx, 1000 |
||
837 | .loop1: |
||
838 | in eax, dx |
||
839 | test eax, LinkIsUp2 |
||
840 | jnz .link_ok |
||
841 | |||
842 | push ecx edx ebx |
||
843 | mov esi, 10 |
||
844 | call Sleep |
||
845 | pop ebx edx ecx |
||
846 | loop .loop1 |
||
847 | |||
848 | ret |
||
849 | |||
850 | .no_myson_phy: |
||
851 | |||
852 | ; for (i = 0; i < DelayTime; ++i) { |
||
853 | ; if (mdio_read(nic, mtdx.phys[0], MII_BMSR) & BMSR_LSTATUS) { |
||
854 | ; mtdx.linkok = 1; |
||
855 | ; return; |
||
856 | ; } |
||
857 | ; m80x_delay(100); |
||
858 | |||
859 | ret |
||
860 | |||
861 | .link_ok: |
||
862 | DEBUGF 1,"Link is up\n" |
||
863 | inc [device.linkok] |
||
864 | ret |
||
865 | |||
866 | |||
867 | |||
868 | |||
869 | align 4 |
||
870 | getlinktype: |
||
871 | |||
872 | DEBUGF 1,"Getting link type\n" |
||
873 | |||
874 | cmp [device.PHYType], MysonPHY |
||
875 | jne .no_myson_phy |
||
876 | |||
877 | DEBUGF 1,"myson PHY\n" |
||
878 | |||
879 | set_io 0 |
||
880 | set_io TCRRCR |
||
881 | in eax, dx |
||
882 | |||
883 | mov [device.duplexmode], 1 ; 1 = half duplex |
||
884 | test eax, FD |
||
885 | jne @f |
||
886 | DEBUGF 1,"full duplex\n" |
||
887 | inc [device.duplexmode] ; 2 = full duplex |
||
888 | @@: |
||
889 | |||
890 | mov [device.line_speed], 1 ; 1 = 10M |
||
891 | test eax, PS10 |
||
892 | jne @f |
||
893 | DEBUGF 1,"100mbit\n" |
||
894 | inc [device.line_speed] ; 2 = 100M |
||
895 | @@: |
||
896 | |||
897 | ret |
||
898 | |||
899 | .no_myson_phy: |
||
900 | |||
901 | DEBUGF 1,"no myson phy\n" |
||
902 | |||
903 | ; if (mtdx.PHYType equ= SeeqPHY) { /* this PHY is SEEQ 80225 */ |
||
904 | ; unsigned int data; |
||
905 | ; |
||
906 | ; data = mdio_read(dev, mtdx.phys[0], MIIRegister18); |
||
907 | ; if (data & SPD_DET_100) |
||
908 | ; mtdx.line_speed = 2; /* 100M */ |
||
909 | ; else |
||
910 | ; mtdx.line_speed = 1; /* 10M */ |
||
911 | ; if (data & DPLX_DET_FULL) |
||
912 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
||
913 | ; else |
||
914 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
||
915 | ; } else if (mtdx.PHYType equ= AhdocPHY) { |
||
916 | ; unsigned int data; |
||
917 | ; |
||
918 | ; data = mdio_read(dev, mtdx.phys[0], DiagnosticReg); |
||
919 | ; if (data & Speed_100) |
||
920 | ; mtdx.line_speed = 2; /* 100M */ |
||
921 | ; else |
||
922 | ; mtdx.line_speed = 1; /* 10M */ |
||
923 | ; if (data & DPLX_FULL) |
||
924 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
||
925 | ; else |
||
926 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
||
927 | ; } |
||
928 | ; else if (mtdx.PHYType equ= MarvellPHY) { |
||
929 | ; unsigned int data; |
||
930 | ; |
||
931 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
||
932 | ; if (data & Full_Duplex) |
||
933 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
||
934 | ; else |
||
935 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
||
936 | ; data &= SpeedMask; |
||
937 | ; if (data equ= Speed_1000M) |
||
938 | ; mtdx.line_speed = 3; /* 1000M */ |
||
939 | ; else if (data equ= Speed_100M) |
||
940 | ; mtdx.line_speed = 2; /* 100M */ |
||
941 | ; else |
||
942 | ; mtdx.line_speed = 1; /* 10M */ |
||
943 | ; } |
||
944 | ; else if (mtdx.PHYType equ= Myson981) { |
||
945 | ; unsigned int data; |
||
946 | ; |
||
947 | ; data = mdio_read(dev, mtdx.phys[0], StatusRegister); |
||
948 | ; |
||
949 | ; if (data & SPEED100) |
||
950 | ; mtdx.line_speed = 2; |
||
951 | ; else |
||
952 | ; mtdx.line_speed = 1; |
||
953 | ; |
||
954 | ; if (data & FULLMODE) |
||
955 | ; mtdx.duplexmode = 2; |
||
956 | ; else |
||
957 | ; mtdx.duplexmode = 1; |
||
958 | ; } |
||
959 | ; else if (mtdx.PHYType equ= LevelOnePHY) { |
||
960 | ; unsigned int data; |
||
961 | ; |
||
962 | ; data = mdio_read(dev, mtdx.phys[0], SpecificReg); |
||
963 | ; if (data & LXT1000_Full) |
||
964 | ; mtdx.duplexmode = 2; /* full duplex mode */ |
||
965 | ; else |
||
966 | ; mtdx.duplexmode = 1; /* half duplex mode */ |
||
967 | ; data &= SpeedMask; |
||
968 | ; if (data equ= LXT1000_1000M) |
||
969 | ; mtdx.line_speed = 3; /* 1000M */ |
||
970 | ; else if (data equ= LXT1000_100M) |
||
971 | ; mtdx.line_speed = 2; /* 100M */ |
||
972 | ; else |
||
973 | ; mtdx.line_speed = 1; /* 10M */ |
||
974 | ; } |
||
975 | |||
976 | ; // chage crvalue |
||
977 | ; // mtdx.crvalue&equ(~PS10)&(~FD); |
||
978 | ; mtdx.crvalue &= (~PS10) & (~FD) & (~PS1000); |
||
979 | ; if (mtdx.line_speed equ= 1) |
||
980 | ; mtdx.crvalue |= PS10; |
||
981 | ; else if (mtdx.line_speed equ= 3) |
||
982 | ; mtdx.crvalue |= PS1000; |
||
983 | ; if (mtdx.duplexmode equ= 2) |
||
984 | ; mtdx.crvalue |= FD; |
||
985 | ; |
||
986 | |||
987 | ret |
||
988 | |||
989 | |||
990 | |||
991 | |||
992 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
993 | ;; ;; |
||
994 | ;; Transmit ;; |
||
995 | ;; ;; |
||
996 | ;; In: buffer pointer in [esp+4] ;; |
||
997 | ;; size of buffer in [esp+8] ;; |
||
998 | ;; pointer to device structure in ebx ;; |
||
999 | ;; ;; |
||
1000 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
1001 | |||
1002 | align 4 |
||
1003 | transmit: |
||
1004 | |||
1005 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n",[esp+4],[esp+8] |
||
1006 | mov eax, [esp+4] |
||
1007 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
||
1008 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
||
1009 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
||
1010 | [eax+13]:2,[eax+12]:2 |
||
1011 | |||
1012 | cmp dword [esp+8], 1514 |
||
1013 | ja .fail |
||
1014 | |||
1015 | mov esi, [device.cur_tx] |
||
4576 | hidnplayr | 1016 | |
1017 | test [esi + mtd_desc.status], TXOWN |
||
1018 | jnz .fail |
||
1019 | |||
3545 | hidnplayr | 1020 | push [esi + mtd_desc.next_desc_logical] |
1021 | pop [device.cur_tx] |
||
1022 | |||
1023 | mov eax, [esp + 4] |
||
1024 | mov [esi + mtd_desc.skbuff], eax |
||
1025 | GetRealAddr |
||
1026 | mov [esi + mtd_desc.buffer], eax |
||
1027 | |||
1028 | mov eax, [esp + 8] |
||
4576 | hidnplayr | 1029 | mov ecx, eax |
3545 | hidnplayr | 1030 | shl eax, PKTSShift ; packet size |
4576 | hidnplayr | 1031 | shl ecx, TBSShift |
1032 | or eax, ecx |
||
1033 | or eax, TXIC + TXLD + TXFD + CRCEnable + PADEnable |
||
3545 | hidnplayr | 1034 | mov [esi + mtd_desc.control], eax |
1035 | mov [esi + mtd_desc.status], TXOWN |
||
1036 | |||
1037 | ; Update stats |
||
1038 | inc [device.packets_tx] |
||
1039 | mov eax, [esp+8] |
||
1040 | add dword [device.bytes_tx], eax |
||
1041 | adc dword [device.bytes_tx + 4], 0 |
||
1042 | |||
4576 | hidnplayr | 1043 | ; TX Poll |
3545 | hidnplayr | 1044 | set_io 0 |
4576 | hidnplayr | 1045 | set_io TXPDR |
3545 | hidnplayr | 1046 | xor eax, eax |
1047 | out dx, eax |
||
1048 | |||
1049 | DEBUGF 1,"transmit ok\n" |
||
1050 | xor eax, eax |
||
1051 | ret 8 |
||
1052 | |||
1053 | .fail: |
||
1054 | DEBUGF 1,"transmit failed\n" |
||
4334 | hidnplayr | 1055 | stdcall KernelFree, [esp + 4] |
3545 | hidnplayr | 1056 | or eax, -1 |
1057 | ret 8 |
||
1058 | |||
1059 | |||
1060 | |||
1061 | align 4 |
||
1062 | read_mac: |
||
1063 | |||
1064 | set_io 0 |
||
1065 | set_io PAR0 |
||
1066 | lea edi, [device.mac] |
||
1067 | insd |
||
1068 | set_io PAR1 |
||
1069 | insw |
||
1070 | DEBUGF 1,"MAC = %x-%x-%x-%x-%x-%x\n",\ |
||
1071 | [device.mac+0]:2,[device.mac+1]:2,[device.mac+2]:2,[device.mac+3]:2,[device.mac+4]:2,[device.mac+5]:2 |
||
1072 | |||
1073 | ret |
||
1074 | |||
1075 | align 4 |
||
1076 | write_mac: |
||
1077 | |||
1078 | ret |
||
1079 | |||
1080 | |||
1081 | |||
1082 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
1083 | ;; ;; |
||
1084 | ;; Interrupt handler ;; |
||
1085 | ;; ;; |
||
1086 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
1087 | |||
1088 | align 4 |
||
1089 | int_handler: |
||
1090 | |||
1091 | push ebx esi edi |
||
1092 | |||
4576 | hidnplayr | 1093 | DEBUGF 1,"INT\n" |
3545 | hidnplayr | 1094 | |
1095 | ; find pointer of device wich made IRQ occur |
||
1096 | |||
1097 | mov ecx, [devices] |
||
1098 | test ecx, ecx |
||
1099 | jz .nothing |
||
1100 | mov esi, device_list |
||
1101 | .nextdevice: |
||
1102 | mov ebx, [esi] |
||
1103 | |||
1104 | set_io 0 |
||
1105 | set_io ISR |
||
1106 | in eax, dx |
||
1107 | out dx, eax ; send it back to ACK |
||
1108 | test eax, eax |
||
1109 | jnz .got_it |
||
1110 | .continue: |
||
1111 | add esi, 4 |
||
1112 | dec ecx |
||
1113 | jnz .nextdevice |
||
1114 | .nothing: |
||
1115 | pop edi esi ebx |
||
1116 | xor eax, eax |
||
1117 | |||
1118 | ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) |
||
1119 | |||
1120 | .got_it: |
||
1121 | |||
4470 | hidnplayr | 1122 | DEBUGF 1,"Device: %x Status: %x\n", ebx, ax |
3545 | hidnplayr | 1123 | |
1124 | test ax, RI ; receive interrupt |
||
1125 | jz .no_rx |
||
1126 | push ax |
||
1127 | .rx_loop: |
||
1128 | mov esi, [device.cur_rx] |
||
1129 | test [esi + mtd_desc.status], RXOWN |
||
1130 | jnz .fail_rx |
||
1131 | |||
4576 | hidnplayr | 1132 | push ebx |
3545 | hidnplayr | 1133 | push .rx_complete |
1134 | |||
1135 | mov ecx, [esi + mtd_desc.status] |
||
1136 | shr ecx, FLNGShift |
||
1137 | sub ecx, 4 ; we dont need CRC |
||
1138 | push ecx |
||
4576 | hidnplayr | 1139 | DEBUGF 1,"Received %u bytes\n", ecx |
3545 | hidnplayr | 1140 | |
1141 | ; Update stats |
||
4576 | hidnplayr | 1142 | add dword[device.bytes_rx], ecx |
1143 | adc dword[device.bytes_rx + 4], 0 |
||
1144 | inc [device.packets_rx] |
||
3545 | hidnplayr | 1145 | |
1146 | push [esi + mtd_desc.skbuff] |
||
1147 | jmp Eth_input |
||
1148 | |||
1149 | .rx_complete: |
||
4576 | hidnplayr | 1150 | pop ebx |
3545 | hidnplayr | 1151 | mov esi, [device.cur_rx] |
1152 | mov [esi + mtd_desc.control], 1536 shl RBSShift |
||
4576 | hidnplayr | 1153 | push esi |
3545 | hidnplayr | 1154 | stdcall KernelAlloc, 1536 |
4576 | hidnplayr | 1155 | pop esi |
3545 | hidnplayr | 1156 | mov [esi + mtd_desc.skbuff], eax |
1157 | call GetPgAddr |
||
1158 | mov [esi + mtd_desc.buffer], eax |
||
1159 | mov [esi + mtd_desc.status], RXOWN |
||
1160 | |||
4576 | hidnplayr | 1161 | push [esi + mtd_desc.next_desc_logical] |
1162 | pop [device.cur_rx] |
||
3545 | hidnplayr | 1163 | |
1164 | jmp .rx_loop |
||
1165 | ; |
||
1166 | ; while( ( mtdx.cur_rx->status & RXOWN ) == 0 ) |
||
1167 | ; { |
||
1168 | ; mtdx.cur_rx->status = RXOWN; |
||
1169 | ; mtdx.cur_rx = mtdx.cur_rx->next_desc_logical; |
||
1170 | ; } |
||
1171 | ; |
||
1172 | ; /* Restart Rx engine if stopped. */ |
||
1173 | ; outl(0, mtdx.ioaddr + RXPDR); |
||
1174 | |||
1175 | .fail_rx: |
||
4576 | hidnplayr | 1176 | DEBUGF 1,"RX done\n" |
1177 | pop ax |
||
3545 | hidnplayr | 1178 | |
1179 | .no_rx: |
||
1180 | test ax, TI ; transmit interrupt |
||
1181 | jz .no_tx |
||
4576 | hidnplayr | 1182 | DEBUGF 1,"TX\n" |
3545 | hidnplayr | 1183 | push ax |
1184 | lea esi, [device.tx_desc] |
||
1185 | mov ecx, NUM_TX_DESC |
||
1186 | .tx_loop: |
||
1187 | test [esi + mtd_desc.status], TXOWN |
||
1188 | jnz .skip_this_one |
||
1189 | mov eax, [esi + mtd_desc.skbuff] |
||
1190 | test eax, eax |
||
1191 | je .skip_this_one |
||
1192 | mov [esi + mtd_desc.skbuff], 0 |
||
4576 | hidnplayr | 1193 | DEBUGF 1,"freeing buffer: 0x%x\n", eax |
3545 | hidnplayr | 1194 | stdcall KernelFree, eax |
1195 | .skip_this_one: |
||
1196 | mov esi, [esi + mtd_desc.next_desc_logical] |
||
1197 | loop .tx_loop |
||
1198 | pop ax |
||
1199 | |||
1200 | .no_tx: |
||
4576 | hidnplayr | 1201 | ; test ax, TBU |
1202 | ; jz .no_tbu |
||
1203 | ; DEBUGF 2,"Transmit buffer unavailable!\n" |
||
1204 | ; .no_tbu: |
||
3545 | hidnplayr | 1205 | |
1206 | .fail: |
||
1207 | pop edi esi ebx |
||
1208 | xor eax, eax |
||
1209 | inc eax |
||
1210 | |||
1211 | ret |
||
1212 | |||
1213 | |||
1214 | ; End of code |
||
1215 | |||
1216 | align 4 ; Place all initialised data here |
||
1217 | |||
1218 | devices dd 0 |
||
1219 | version dd (DRIVER_VERSION shl 16) or (API_VERSION and 0xFFFF) |
||
1220 | my_service db 'mtd80x',0 ; max 16 chars include zero |
||
1221 | |||
1222 | |||
1223 | ; 0x1516, 0x0800, "MTD800", "Myson MTD800" |
||
1224 | ; 0x1516, 0x0803, "MTD803", "Surecom EP-320X" |
||
1225 | ; 0x1516, 0x0891, "MTD891", "Myson MTD891" |
||
1226 | |||
1227 | |||
1228 | include_debug_strings ; All data wich FDO uses will be included here |
||
1229 | |||
1230 | section '.data' data readable writable align 16 ; place all uninitialized data place here |
||
1231 | |||
1232 | device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling>>> |
||
1233 |