Rev 5074 | Rev 5363 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed
Rev | Author | Line No. | Line |
---|---|---|---|
3545 | hidnplayr | 1 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
2 | ;; ;; |
||
4449 | hidnplayr | 3 | ;; Copyright (C) KolibriOS team 2004-2014. All rights reserved. ;; |
3545 | hidnplayr | 4 | ;; Distributed under terms of the GNU General Public License ;; |
5 | ;; ;; |
||
6 | ;; Realtek 8139 driver for KolibriOS ;; |
||
7 | ;; ;; |
||
8 | ;; based on RTL8139.asm driver for menuetos ;; |
||
9 | ;; and realtek8139.asm for SolarOS by Eugen Brasoveanu ;; |
||
10 | ;; ;; |
||
11 | ;; Written by hidnplayr@kolibrios.org ;; |
||
12 | ;; ;; |
||
13 | ;; GNU GENERAL PUBLIC LICENSE ;; |
||
14 | ;; Version 2, June 1991 ;; |
||
15 | ;; ;; |
||
16 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
17 | |||
5045 | hidnplayr | 18 | format PE DLL native |
19 | entry START |
||
3545 | hidnplayr | 20 | |
5045 | hidnplayr | 21 | CURRENT_API = 0x0200 |
22 | COMPATIBLE_API = 0x0100 |
||
23 | API_VERSION = (COMPATIBLE_API shl 16) + CURRENT_API |
||
3545 | hidnplayr | 24 | |
25 | MAX_DEVICES = 16 |
||
26 | |||
5045 | hidnplayr | 27 | RBLEN = 3 ; Receive buffer size: 0==8K 1==16k 2==32k 3==64k |
3545 | hidnplayr | 28 | |
5045 | hidnplayr | 29 | TXRR = 8 ; total retries = 16+(TXRR*16) |
30 | TX_MXDMA = 6 ; 0=16 1=32 2=64 3=128 4=256 5=512 6=1024 7=2048 |
||
31 | ERTXTH = 8 ; in unit of 32 bytes e.g:(8*32)=256 |
||
32 | RX_MXDMA = 7 ; 0=16 1=32 2=64 3=128 4=256 5=512 6=1024 7=unlimited |
||
33 | RXFTH = 7 ; 0=16 1=32 2=64 3=128 4=256 5=512 6=1024 7=no threshold |
||
3857 | hidnplayr | 34 | |
3545 | hidnplayr | 35 | __DEBUG__ = 1 |
5045 | hidnplayr | 36 | __DEBUG_LEVEL__ = 2 ; 1 = verbose, 2 = errors only |
3545 | hidnplayr | 37 | |
5045 | hidnplayr | 38 | section '.flat' readable writable executable |
39 | |||
40 | include '../proc32.inc' |
||
4467 | hidnplayr | 41 | include '../struct.inc' |
42 | include '../macros.inc' |
||
3545 | hidnplayr | 43 | include '../fdo.inc' |
5074 | hidnplayr | 44 | include '../netdrv.inc' |
3545 | hidnplayr | 45 | |
46 | REG_IDR0 = 0x00 |
||
47 | REG_MAR0 = 0x08 ; multicast filter register 0 |
||
48 | REG_MAR4 = 0x0c ; multicast filter register 4 |
||
49 | REG_TSD0 = 0x10 ; transmit status of descriptor |
||
50 | REG_TSAD0 = 0x20 ; transmit start address of descriptor |
||
51 | REG_RBSTART = 0x30 ; RxBuffer start address |
||
52 | REG_COMMAND = 0x37 ; command register |
||
53 | REG_CAPR = 0x38 ; current address of packet read (word) R/W |
||
54 | REG_IMR = 0x3c ; interrupt mask register |
||
55 | REG_ISR = 0x3e ; interrupt status register |
||
56 | REG_TXCONFIG = 0x40 ; transmit configuration register |
||
57 | REG_RXCONFIG = 0x44 ; receive configuration register 0 |
||
58 | REG_MPC = 0x4c ; missed packet counter |
||
59 | REG_9346CR = 0x50 ; serial eeprom 93C46 command register |
||
60 | REG_CONFIG1 = 0x52 ; configuration register 1 |
||
61 | REG_MSR = 0x58 |
||
62 | REG_CONFIG4 = 0x5a ; configuration register 4 |
||
63 | REG_HLTCLK = 0x5b ; undocumented halt clock register |
||
64 | REG_BMCR = 0x62 ; basic mode control register |
||
65 | REG_ANAR = 0x66 ; auto negotiation advertisement register |
||
66 | REG_9346CR_WE = 11b shl 6 |
||
67 | |||
68 | BIT_RUNT = 4 ; total packet length < 64 bytes |
||
69 | BIT_LONG = 3 ; total packet length > 4k |
||
70 | BIT_CRC = 2 ; crc error occured |
||
71 | BIT_FAE = 1 ; frame alignment error occured |
||
72 | BIT_ROK = 0 ; received packet is ok |
||
73 | |||
74 | BIT_RST = 4 ; reset bit |
||
75 | BIT_RE = 3 ; receiver enabled |
||
76 | BIT_TE = 2 ; transmitter enabled |
||
77 | BUFE = 1 ; rx buffer is empty, no packet stored |
||
78 | |||
79 | BIT_ISR_TOK = 2 ; transmit ok |
||
80 | BIT_ISR_RER = 1 ; receive error interrupt |
||
81 | BIT_ISR_ROK = 0 ; receive ok |
||
82 | |||
83 | BIT_TX_MXDMA = 8 ; Max DMA burst size per Tx DMA burst |
||
84 | BIT_TXRR = 4 ; Tx Retry count 16+(TXRR*16) |
||
85 | |||
86 | BIT_RXFTH = 13 ; Rx fifo threshold |
||
87 | BIT_RBLEN = 11 ; Ring buffer length indicator |
||
88 | BIT_RX_MXDMA = 8 ; Max DMA burst size per Rx DMA burst |
||
89 | BIT_NOWRAP = 7 ; transfered data wrapping |
||
90 | BIT_9356SEL = 6 ; eeprom selector 9346/9356 |
||
91 | BIT_AER = 5 ; accept error packets |
||
92 | BIT_AR = 4 ; accept runt packets |
||
93 | BIT_AB = 3 ; accept broadcast packets |
||
94 | BIT_AM = 2 ; accept multicast packets |
||
95 | BIT_APM = 1 ; accept physical match packets |
||
96 | BIT_AAP = 0 ; accept all packets |
||
97 | |||
98 | BIT_93C46_EEM1 = 7 ; RTL8139 eeprom operating mode1 |
||
99 | BIT_93C46_EEM0 = 6 ; RTL8139 eeprom operating mode0 |
||
100 | BIT_93C46_EECS = 3 ; chip select |
||
101 | BIT_93C46_EESK = 2 ; serial data clock |
||
102 | BIT_93C46_EEDI = 1 ; serial data input |
||
103 | BIT_93C46_EEDO = 0 ; serial data output |
||
104 | |||
105 | BIT_LWACT = 4 ; see REG_CONFIG1 |
||
106 | BIT_SLEEP = 1 ; sleep bit at older chips |
||
107 | BIT_PWRDWN = 0 ; power down bit at older chips |
||
108 | BIT_PMEn = 0 ; power management enabled |
||
109 | |||
110 | BIT_LWPTN = 2 ; see REG_CONFIG4 |
||
111 | |||
112 | BIT_ERTXTH = 16 ; early TX threshold |
||
113 | BIT_TOK = 15 ; transmit ok |
||
114 | BIT_OWN = 13 ; tx DMA operation is completed |
||
115 | |||
116 | BIT_ANE = 12 ; auto negotiation enable |
||
117 | |||
118 | BIT_TXFD = 8 ; 100base-T full duplex |
||
119 | BIT_TX = 7 ; 100base-T |
||
120 | BIT_10FD = 6 ; 10base-T full duplex |
||
121 | BIT_10 = 5 ; 10base-T |
||
122 | BIT_SELECTOR = 0 ; binary encoded selector CSMA/CD=00001 |
||
123 | |||
124 | BIT_IFG1 = 25 |
||
125 | BIT_IFG0 = 24 |
||
126 | |||
127 | RX_CONFIG = (RBLEN shl BIT_RBLEN) or \ |
||
128 | (RX_MXDMA shl BIT_RX_MXDMA) or \ |
||
129 | (1 shl BIT_NOWRAP) or \ |
||
130 | (RXFTH shl BIT_RXFTH) or\ |
||
3857 | hidnplayr | 131 | (1 shl BIT_AB) or \ ; Accept broadcast packets |
132 | (1 shl BIT_APM) or \ ; Accept physical match packets |
||
133 | (1 shl BIT_AER) or \ ; Accept error packets |
||
134 | (1 shl BIT_AR) or \ ; Accept Runt packets (smaller then 64 bytes) |
||
135 | (1 shl BIT_AM) ; Accept multicast packets |
||
3545 | hidnplayr | 136 | |
3857 | hidnplayr | 137 | RX_BUFFER_SIZE = (8192 shl RBLEN);+16+1500 |
138 | NUM_TX_DESC = 4 ; not user selectable |
||
3545 | hidnplayr | 139 | |
140 | EE_93C46_REG_ETH_ID = 7 ; MAC offset |
||
141 | EE_93C46_READ_CMD = (6 shl 6) ; 110b + 6bit address |
||
142 | EE_93C56_READ_CMD = (6 shl 8) ; 110b + 8bit address |
||
143 | EE_93C46_CMD_LENGTH = 9 ; start bit + cmd + 6bit address |
||
144 | EE_93C56_CMD_LENGTH = 11 ; start bit + cmd + 8bit ddress |
||
145 | |||
146 | VER_RTL8139 = 1100000b |
||
147 | VER_RTL8139A = 1110000b |
||
148 | VER_RTL8139AG = 1110100b |
||
149 | VER_RTL8139B = 1111000b |
||
150 | VER_RTL8130 = VER_RTL8139B |
||
151 | VER_RTL8139C = 1110100b |
||
152 | VER_RTL8100 = 1111010b |
||
153 | VER_RTL8100B = 1110101b |
||
154 | VER_RTL8139D = VER_RTL8100B |
||
155 | VER_RTL8139CP = 1110110b |
||
156 | VER_RTL8101 = 1110111b |
||
157 | |||
158 | IDX_RTL8139 = 0 |
||
159 | IDX_RTL8139A = 1 |
||
160 | IDX_RTL8139B = 2 |
||
161 | IDX_RTL8139C = 3 |
||
162 | IDX_RTL8100 = 4 |
||
163 | IDX_RTL8139D = 5 |
||
164 | IDX_RTL8139D = 6 |
||
165 | IDX_RTL8101 = 7 |
||
166 | |||
167 | ISR_SERR = 1 shl 15 |
||
168 | ISR_TIMEOUT = 1 shl 14 |
||
169 | ISR_LENCHG = 1 shl 13 |
||
170 | ISR_FIFOOVW = 1 shl 6 |
||
171 | ISR_PUN = 1 shl 5 |
||
172 | ISR_RXOVW = 1 shl 4 |
||
173 | ISR_TER = 1 shl 3 |
||
174 | ISR_TOK = 1 shl 2 |
||
175 | ISR_RER = 1 shl 1 |
||
176 | ISR_ROK = 1 shl 0 |
||
177 | |||
178 | INTERRUPT_MASK = ISR_ROK or \ |
||
3857 | hidnplayr | 179 | ISR_RER or \ |
180 | ISR_TOK or \ |
||
181 | ISR_TER or \ |
||
3545 | hidnplayr | 182 | ISR_RXOVW or \ |
183 | ISR_PUN or \ |
||
184 | ISR_FIFOOVW or \ |
||
185 | ISR_LENCHG or \ |
||
3857 | hidnplayr | 186 | ISR_TIMEOUT or \ |
187 | ISR_SERR |
||
3545 | hidnplayr | 188 | |
189 | TSR_OWN = 1 shl 13 |
||
190 | TSR_TUN = 1 shl 14 |
||
191 | TSR_TOK = 1 shl 15 |
||
192 | |||
193 | TSR_CDH = 1 shl 28 |
||
194 | TSR_OWC = 1 shl 29 |
||
195 | TSR_TABT = 1 shl 30 |
||
196 | TSR_CRS = 1 shl 31 |
||
197 | |||
198 | |||
5045 | hidnplayr | 199 | struct device ETH_DEVICE |
3545 | hidnplayr | 200 | |
5045 | hidnplayr | 201 | io_addr dd ? |
202 | pci_bus dd ? |
||
203 | pci_dev dd ? |
||
204 | irq_line db ? |
||
205 | rb 3 ; align 4 |
||
3545 | hidnplayr | 206 | |
5045 | hidnplayr | 207 | rx_buffer dd ? |
208 | rx_data_offset dd ? |
||
209 | curr_tx_desc db ? |
||
210 | hw_ver_id db ? |
||
211 | rb 2 ; align 4 |
||
3545 | hidnplayr | 212 | |
5045 | hidnplayr | 213 | TX_DESC rd NUM_TX_DESC |
3545 | hidnplayr | 214 | |
5045 | hidnplayr | 215 | ends |
3545 | hidnplayr | 216 | |
217 | |||
218 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
219 | ;; ;; |
||
220 | ;; proc START ;; |
||
221 | ;; ;; |
||
222 | ;; (standard driver proc) ;; |
||
223 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
224 | |||
5045 | hidnplayr | 225 | proc START c, reason:dword, cmdline:dword |
3545 | hidnplayr | 226 | |
5045 | hidnplayr | 227 | cmp [reason], DRV_ENTRY |
228 | jne .fail |
||
3545 | hidnplayr | 229 | |
5045 | hidnplayr | 230 | DEBUGF 2,"Loading driver\n" |
231 | invoke RegService, my_service, service_proc |
||
3545 | hidnplayr | 232 | ret |
233 | |||
234 | .fail: |
||
235 | xor eax, eax |
||
236 | ret |
||
237 | |||
238 | endp |
||
239 | |||
240 | |||
241 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
242 | ;; ;; |
||
243 | ;; proc SERVICE_PROC ;; |
||
244 | ;; ;; |
||
245 | ;; (standard driver proc) ;; |
||
246 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
247 | |||
248 | proc service_proc stdcall, ioctl:dword |
||
249 | |||
250 | mov edx, [ioctl] |
||
4470 | hidnplayr | 251 | mov eax, [edx + IOCTL.io_code] |
3545 | hidnplayr | 252 | |
253 | ;------------------------------------------------------ |
||
254 | |||
255 | cmp eax, 0 ;SRV_GETVERSION |
||
256 | jne @F |
||
257 | |||
4470 | hidnplayr | 258 | cmp [edx + IOCTL.out_size], 4 |
3545 | hidnplayr | 259 | jb .fail |
4470 | hidnplayr | 260 | mov eax, [edx + IOCTL.output] |
3545 | hidnplayr | 261 | mov [eax], dword API_VERSION |
262 | |||
263 | xor eax, eax |
||
264 | ret |
||
265 | |||
266 | ;------------------------------------------------------ |
||
267 | @@: |
||
268 | cmp eax, 1 ;SRV_HOOK |
||
269 | jne .fail |
||
270 | |||
4470 | hidnplayr | 271 | cmp [edx + IOCTL.inp_size], 3 ; Data input must be at least 3 bytes |
3545 | hidnplayr | 272 | jb .fail |
273 | |||
4470 | hidnplayr | 274 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 275 | cmp byte [eax], 1 ; 1 means device number and bus number (pci) are given |
276 | jne .fail ; other types arent supported for this card yet |
||
277 | |||
278 | ; check if the device is already listed |
||
279 | |||
280 | mov esi, device_list |
||
281 | mov ecx, [devices] |
||
282 | test ecx, ecx |
||
283 | jz .firstdevice |
||
284 | |||
285 | mov ax, [eax+1] ; get the pci bus and device numbers |
||
286 | .nextdevice: |
||
287 | mov ebx, [esi] |
||
5045 | hidnplayr | 288 | cmp al, byte[ebx + device.pci_bus] |
3545 | hidnplayr | 289 | jne @f |
5045 | hidnplayr | 290 | cmp ah, byte[ebx + device.pci_dev] |
3545 | hidnplayr | 291 | je .find_devicenum ; Device is already loaded, let's find it's device number |
292 | @@: |
||
293 | add esi, 4 |
||
294 | loop .nextdevice |
||
295 | |||
296 | |||
297 | ; This device doesnt have its own eth_device structure yet, lets create one |
||
298 | .firstdevice: |
||
299 | cmp [devices], MAX_DEVICES ; First check if the driver can handle one more card |
||
300 | jae .fail |
||
301 | |||
5045 | hidnplayr | 302 | allocate_and_clear ebx, sizeof.device, .fail ; Allocate the buffer for device structure |
3545 | hidnplayr | 303 | |
304 | ; Fill in the direct call addresses into the struct |
||
305 | |||
5045 | hidnplayr | 306 | mov [ebx + device.reset], reset |
307 | mov [ebx + device.transmit], transmit |
||
308 | mov [ebx + device.unload], unload |
||
309 | mov [ebx + device.name], my_service |
||
3545 | hidnplayr | 310 | |
311 | ; save the pci bus and device numbers |
||
312 | |||
4470 | hidnplayr | 313 | mov eax, [edx + IOCTL.input] |
3545 | hidnplayr | 314 | movzx ecx, byte[eax+1] |
5045 | hidnplayr | 315 | mov [ebx + device.pci_bus], ecx |
3545 | hidnplayr | 316 | movzx ecx, byte[eax+2] |
5045 | hidnplayr | 317 | mov [ebx + device.pci_dev], ecx |
3545 | hidnplayr | 318 | |
319 | ; Now, it's time to find the base io addres of the PCI device |
||
320 | |||
5045 | hidnplayr | 321 | stdcall PCI_find_io, [ebx + device.pci_bus], [ebx + device.pci_dev] |
322 | mov [ebx + device.io_addr], eax |
||
3545 | hidnplayr | 323 | |
324 | ; We've found the io address, find IRQ now |
||
325 | |||
5045 | hidnplayr | 326 | invoke PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line |
327 | mov [ebx + device.irq_line], al |
||
3545 | hidnplayr | 328 | |
3856 | hidnplayr | 329 | DEBUGF 1, "Hooking into device, dev:%x, bus:%x, irq:%x, I/O addr:%x\n",\ |
5045 | hidnplayr | 330 | [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.io_addr]:4 |
3545 | hidnplayr | 331 | |
332 | ; Allocate the receive buffer |
||
333 | |||
5045 | hidnplayr | 334 | invoke CreateRingBuffer, dword (RX_BUFFER_SIZE), dword PG_SW |
3545 | hidnplayr | 335 | test eax, eax |
336 | jz .err |
||
5045 | hidnplayr | 337 | mov [ebx + device.rx_buffer], eax |
3545 | hidnplayr | 338 | |
339 | ; Ok, the eth_device structure is ready, let's probe the device |
||
340 | |||
341 | call probe ; this function will output in eax |
||
342 | test eax, eax |
||
343 | jnz .err ; If an error occured, exit |
||
344 | |||
345 | mov eax, [devices] ; Add the device structure to our device list |
||
346 | mov [device_list+4*eax], ebx ; (IRQ handler uses this list to find device) |
||
347 | inc [devices] ; |
||
348 | |||
3685 | hidnplayr | 349 | call reset |
350 | test eax, eax |
||
351 | jnz .destroy |
||
352 | |||
5045 | hidnplayr | 353 | mov [ebx + device.type], NET_TYPE_ETH |
354 | invoke NetRegDev |
||
3545 | hidnplayr | 355 | |
356 | cmp eax, -1 |
||
357 | je .destroy |
||
358 | |||
359 | ret |
||
360 | |||
361 | ; If the device was already loaded, find the device number and return it in eax |
||
362 | |||
363 | .find_devicenum: |
||
3856 | hidnplayr | 364 | DEBUGF 1, "Trying to find device number of already registered device\n" |
5045 | hidnplayr | 365 | invoke NetPtrToNum ; This kernel procedure converts a pointer to device struct in ebx |
3545 | hidnplayr | 366 | ; into a device number in edi |
367 | mov eax, edi ; Application wants it in eax instead |
||
3856 | hidnplayr | 368 | DEBUGF 1, "Kernel says: %u\n", eax |
3545 | hidnplayr | 369 | ret |
370 | |||
371 | ; If an error occured, remove all allocated data and exit (returning -1 in eax) |
||
372 | |||
373 | .destroy: |
||
3685 | hidnplayr | 374 | ; todo: unregister device from device_list |
3545 | hidnplayr | 375 | ; todo: reset device into virgin state |
376 | |||
377 | .err: |
||
3856 | hidnplayr | 378 | DEBUGF 2, "Error, removing all data !\n" |
5045 | hidnplayr | 379 | invoke KernelFree, [ebx + device.rx_buffer] |
380 | invoke KernelFree, ebx |
||
3545 | hidnplayr | 381 | |
382 | .fail: |
||
383 | or eax, -1 |
||
384 | ret |
||
385 | |||
386 | ;------------------------------------------------------ |
||
387 | endp |
||
388 | |||
389 | |||
390 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
391 | ;; ;; |
||
392 | ;; Actual Hardware dependent code starts here ;; |
||
393 | ;; ;; |
||
394 | ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;; |
||
395 | |||
396 | align 4 |
||
397 | unload: |
||
398 | ; TODO: (in this particular order) |
||
399 | ; |
||
400 | ; - Stop the device |
||
401 | ; - Detach int handler |
||
402 | ; - Remove device from local list (RTL8139_LIST) |
||
403 | ; - call unregister function in kernel |
||
404 | ; - Remove all allocated structures and buffers the card used |
||
405 | |||
406 | or eax, -1 |
||
407 | |||
408 | ret |
||
409 | |||
410 | |||
411 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
412 | ;; |
||
413 | ;; probe: enables the device (if it really is RTL8139) |
||
414 | ;; |
||
415 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
416 | |||
417 | align 4 |
||
418 | probe: |
||
3856 | hidnplayr | 419 | DEBUGF 1, "Probing\n" |
3545 | hidnplayr | 420 | |
5045 | hidnplayr | 421 | ; Make the device a bus master |
422 | invoke PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command |
||
423 | or al, PCI_CMD_MASTER |
||
424 | invoke PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax |
||
3545 | hidnplayr | 425 | |
426 | ; get chip version |
||
5045 | hidnplayr | 427 | set_io [ebx + device.io_addr], 0 |
428 | set_io [ebx + device.io_addr], REG_TXCONFIG + 2 |
||
3545 | hidnplayr | 429 | in ax, dx |
430 | shr ah, 2 |
||
431 | shr ax, 6 |
||
432 | and al, 01111111b |
||
433 | |||
434 | ; now find it in our array |
||
435 | mov ecx, HW_VER_ARRAY_SIZE-1 |
||
436 | .chip_ver_loop: |
||
437 | cmp al, [hw_ver_array + ecx] |
||
438 | je .chip_ver_found |
||
439 | dec ecx |
||
440 | jns .chip_ver_loop |
||
441 | .unknown: |
||
442 | mov ecx, 8 |
||
443 | .chip_ver_found: |
||
444 | cmp ecx, 8 |
||
445 | ja .unknown |
||
446 | |||
5045 | hidnplayr | 447 | mov [ebx + device.hw_ver_id], cl |
3545 | hidnplayr | 448 | |
449 | mov ecx, [crosslist+ecx*4] |
||
5045 | hidnplayr | 450 | mov [ebx + device.name], ecx |
3545 | hidnplayr | 451 | |
3856 | hidnplayr | 452 | DEBUGF 1, "Chip version: %s\n", ecx |
3545 | hidnplayr | 453 | |
454 | ; wake up the chip |
||
5045 | hidnplayr | 455 | set_io [ebx + device.io_addr], 0 |
456 | set_io [ebx + device.io_addr], REG_HLTCLK |
||
3545 | hidnplayr | 457 | mov al, 'R' ; run the clock |
458 | out dx, al |
||
459 | |||
460 | ; unlock config and BMCR registers |
||
5045 | hidnplayr | 461 | set_io [ebx + device.io_addr], REG_9346CR |
3545 | hidnplayr | 462 | mov al, (1 shl BIT_93C46_EEM1) or (1 shl BIT_93C46_EEM0) |
463 | out dx, al |
||
464 | |||
465 | ; enable power management |
||
5045 | hidnplayr | 466 | set_io [ebx + device.io_addr], REG_CONFIG1 |
3545 | hidnplayr | 467 | in al, dx |
5045 | hidnplayr | 468 | cmp [ebx + device.hw_ver_id], IDX_RTL8139B |
3545 | hidnplayr | 469 | jae .new_chip |
470 | ; wake up older chips |
||
471 | and al, not ((1 shl BIT_SLEEP) or (1 shl BIT_PWRDWN)) |
||
472 | out dx, al |
||
473 | jmp .finish_wake_up |
||
474 | |||
475 | ; set LWAKE pin to active high (default value). |
||
476 | ; it is for Wake-On-LAN functionality of some motherboards. |
||
477 | ; this signal is used to inform the motherboard to execute a wake-up process. |
||
478 | ; only at newer chips. |
||
479 | .new_chip: |
||
480 | or al, (1 shl BIT_PMEn) |
||
481 | and al, not (1 shl BIT_LWACT) |
||
482 | out dx, al |
||
483 | |||
5045 | hidnplayr | 484 | set_io [ebx + device.io_addr], REG_CONFIG4 |
3545 | hidnplayr | 485 | in al, dx |
486 | and al, not (1 shl BIT_LWPTN) |
||
487 | out dx, al |
||
488 | |||
489 | ; lock config and BMCR registers |
||
490 | .finish_wake_up: |
||
491 | xor al, al |
||
5045 | hidnplayr | 492 | set_io [ebx + device.io_addr], 0 |
493 | set_io [ebx + device.io_addr], REG_9346CR |
||
3545 | hidnplayr | 494 | out dx, al |
3856 | hidnplayr | 495 | DEBUGF 1, "probing done!\n" |
3545 | hidnplayr | 496 | |
3685 | hidnplayr | 497 | xor eax, eax |
3545 | hidnplayr | 498 | |
3685 | hidnplayr | 499 | ret |
500 | |||
501 | |||
3545 | hidnplayr | 502 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
503 | ;; |
||
504 | ;; reset: Set up all registers and descriptors, clear some values |
||
505 | ;; |
||
506 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
507 | |||
508 | reset: |
||
3856 | hidnplayr | 509 | DEBUGF 1, "Reset\n" |
3545 | hidnplayr | 510 | |
511 | ; attach int handler |
||
5045 | hidnplayr | 512 | movzx eax, [ebx + device.irq_line] |
3545 | hidnplayr | 513 | DEBUGF 1, "Attaching int handler to irq %x\n", eax:1 |
5045 | hidnplayr | 514 | invoke AttachIntHandler, eax, int_handler, ebx |
3545 | hidnplayr | 515 | test eax, eax |
516 | jnz @f |
||
3856 | hidnplayr | 517 | DEBUGF 2, "Could not attach int handler!\n" |
5045 | hidnplayr | 518 | or eax, -1 |
519 | ret |
||
3545 | hidnplayr | 520 | @@: |
521 | |||
522 | ; reset chip |
||
523 | DEBUGF 1, "Resetting chip\n" |
||
5045 | hidnplayr | 524 | set_io [ebx + device.io_addr], 0 |
525 | set_io [ebx + device.io_addr], REG_COMMAND |
||
3545 | hidnplayr | 526 | mov al, 1 shl BIT_RST |
527 | out dx, al |
||
528 | mov cx, 1000 ; wait no longer for the reset |
||
529 | .wait_for_reset: |
||
530 | in al, dx |
||
531 | test al, 1 shl BIT_RST |
||
532 | jz .reset_completed ; RST remains 1 during reset |
||
533 | dec cx |
||
534 | jns .wait_for_reset |
||
3856 | hidnplayr | 535 | DEBUGF 2, "Reset timeout!\n" |
3545 | hidnplayr | 536 | .reset_completed: |
537 | |||
3858 | hidnplayr | 538 | ; Read MAC address |
539 | call read_mac |
||
540 | |||
3545 | hidnplayr | 541 | ; unlock config and BMCR registers |
5045 | hidnplayr | 542 | set_io [ebx + device.io_addr], 0 |
543 | set_io [ebx + device.io_addr], REG_9346CR |
||
3545 | hidnplayr | 544 | mov al, (1 shl BIT_93C46_EEM1) or (1 shl BIT_93C46_EEM0) |
545 | out dx, al |
||
546 | |||
547 | ; initialize multicast registers (no filtering) |
||
548 | mov eax, 0xffffffff |
||
5045 | hidnplayr | 549 | set_io [ebx + device.io_addr], REG_MAR0 |
3545 | hidnplayr | 550 | out dx, eax |
5045 | hidnplayr | 551 | set_io [ebx + device.io_addr], REG_MAR4 |
3545 | hidnplayr | 552 | out dx, eax |
553 | |||
554 | ; enable Rx/Tx |
||
555 | mov al, (1 shl BIT_RE) or (1 shl BIT_TE) |
||
5045 | hidnplayr | 556 | set_io [ebx + device.io_addr], REG_COMMAND |
3545 | hidnplayr | 557 | out dx, al |
558 | |||
559 | ; Rxbuffer size, unlimited dma burst, no wrapping, no rx threshold |
||
560 | ; accept broadcast packets, accept physical match packets |
||
3858 | hidnplayr | 561 | mov eax, RX_CONFIG |
5045 | hidnplayr | 562 | set_io [ebx + device.io_addr], REG_RXCONFIG |
3858 | hidnplayr | 563 | out dx, eax |
3545 | hidnplayr | 564 | |
565 | ; 1024 bytes DMA burst, total retries = 16 + 8 * 16 = 144 |
||
566 | mov eax, (TX_MXDMA shl BIT_TX_MXDMA) or (TXRR shl BIT_TXRR) or BIT_IFG1 or BIT_IFG0 |
||
5045 | hidnplayr | 567 | set_io [ebx + device.io_addr], REG_TXCONFIG |
3545 | hidnplayr | 568 | out dx, eax |
569 | |||
570 | ; enable auto negotiation |
||
5045 | hidnplayr | 571 | set_io [ebx + device.io_addr], REG_BMCR |
3545 | hidnplayr | 572 | in ax, dx |
573 | or ax, (1 shl BIT_ANE) |
||
574 | out dx, ax |
||
575 | |||
576 | ; set auto negotiation advertisement |
||
5045 | hidnplayr | 577 | set_io [ebx + device.io_addr], REG_ANAR |
3545 | hidnplayr | 578 | in ax, dx |
579 | or ax, (1 shl BIT_SELECTOR) or (1 shl BIT_10) or (1 shl BIT_10FD) or (1 shl BIT_TX) or (1 shl BIT_TXFD) |
||
580 | out dx, ax |
||
581 | |||
582 | ; lock config and BMCR registers |
||
583 | xor eax, eax |
||
5045 | hidnplayr | 584 | set_io [ebx + device.io_addr], REG_9346CR |
3545 | hidnplayr | 585 | out dx, al |
586 | |||
587 | ; init RX/TX pointers |
||
5045 | hidnplayr | 588 | mov [ebx + device.rx_data_offset], eax |
589 | mov [ebx + device.curr_tx_desc], al |
||
590 | ; set_io [ebx + device.io_addr], REG_CAPR |
||
3545 | hidnplayr | 591 | ; out dx, ax |
592 | |||
593 | ; clear packet/byte counters |
||
5045 | hidnplayr | 594 | lea edi, [ebx + device.bytes_tx] |
3545 | hidnplayr | 595 | mov ecx, 6 |
596 | rep stosd |
||
597 | |||
598 | ; clear missing packet counter |
||
5045 | hidnplayr | 599 | set_io [ebx + device.io_addr], REG_MPC |
3545 | hidnplayr | 600 | out dx, eax |
601 | |||
602 | ; set RxBuffer address, init RX buffer offset |
||
5045 | hidnplayr | 603 | mov eax, [ebx + device.rx_buffer] |
3545 | hidnplayr | 604 | mov dword[eax], 0 ; clear receive flags for first packet (really needed??) |
3685 | hidnplayr | 605 | DEBUGF 1, "RX buffer virtual addr=0x%x\n", eax |
5045 | hidnplayr | 606 | invoke GetPhysAddr |
3857 | hidnplayr | 607 | DEBUGF 1, "RX buffer physical addr=0x%x\n", eax |
5045 | hidnplayr | 608 | set_io [ebx + device.io_addr], REG_RBSTART |
3545 | hidnplayr | 609 | out dx, eax |
610 | |||
611 | ; enable interrupts |
||
5045 | hidnplayr | 612 | set_io [ebx + device.io_addr], 0 |
613 | set_io [ebx + device.io_addr], REG_IMR |
||
3545 | hidnplayr | 614 | mov ax, INTERRUPT_MASK |
615 | out dx, ax |
||
616 | |||
617 | ; Set the mtu, kernel will be able to send now |
||
5045 | hidnplayr | 618 | mov [ebx + device.mtu], 1514 |
3545 | hidnplayr | 619 | |
620 | call cable |
||
621 | |||
622 | ; Indicate that we have successfully reset the card |
||
623 | xor eax, eax |
||
624 | ret |
||
625 | |||
626 | |||
627 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
628 | ;; ;; |
||
629 | ;; Transmit ;; |
||
630 | ;; ;; |
||
631 | ;; In: buffer pointer in [esp+4] ;; |
||
632 | ;; size of buffer in [esp+8] ;; |
||
633 | ;; pointer to device structure in ebx ;; |
||
634 | ;; ;; |
||
635 | ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
||
5045 | hidnplayr | 636 | |
637 | proc transmit stdcall bufferptr, buffersize |
||
638 | |||
639 | pushf |
||
640 | cli |
||
641 | |||
642 | DEBUGF 1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [buffersize] |
||
643 | mov eax, [bufferptr] |
||
644 | DEBUGF 1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\ |
||
3545 | hidnplayr | 645 | [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\ |
646 | [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\ |
||
647 | [eax+13]:2,[eax+12]:2 |
||
648 | |||
5045 | hidnplayr | 649 | cmp [buffersize], 1514 |
3545 | hidnplayr | 650 | ja .fail |
5045 | hidnplayr | 651 | cmp [buffersize], 60 |
3545 | hidnplayr | 652 | jb .fail |
653 | |||
654 | ; check if we own the current discriptor |
||
5045 | hidnplayr | 655 | set_io [ebx + device.io_addr], 0 |
656 | set_io [ebx + device.io_addr], REG_TSD0 |
||
657 | movzx ecx, [ebx + device.curr_tx_desc] |
||
3545 | hidnplayr | 658 | shl ecx, 2 |
659 | add edx, ecx |
||
660 | in eax, dx |
||
661 | test eax, (1 shl BIT_OWN) |
||
662 | jz .wait_to_send |
||
663 | |||
664 | .send_packet: |
||
665 | ; get next descriptor |
||
5045 | hidnplayr | 666 | inc [ebx + device.curr_tx_desc] |
667 | and [ebx + device.curr_tx_desc], NUM_TX_DESC-1 |
||
3545 | hidnplayr | 668 | |
669 | ; Update stats |
||
5045 | hidnplayr | 670 | inc [ebx + device.packets_tx] |
671 | mov eax, [buffersize] |
||
672 | add dword [ebx + device.bytes_tx], eax |
||
673 | adc dword [ebx + device.bytes_tx+4], 0 |
||
3545 | hidnplayr | 674 | |
675 | ; Set the buffer address |
||
5045 | hidnplayr | 676 | set_io [ebx + device.io_addr], REG_TSAD0 |
677 | mov eax, [bufferptr] |
||
678 | mov [ebx + device.TX_DESC+ecx], eax |
||
679 | invoke GetPhysAddr |
||
3545 | hidnplayr | 680 | out dx, eax |
681 | |||
682 | ; And the size of the buffer |
||
5045 | hidnplayr | 683 | set_io [ebx + device.io_addr], REG_TSD0 |
684 | mov eax, [buffersize] |
||
3545 | hidnplayr | 685 | or eax, (ERTXTH shl BIT_ERTXTH) ; Early threshold |
686 | out dx, eax |
||
687 | |||
688 | DEBUGF 1, "Packet Sent!\n" |
||
5127 | hidnplayr | 689 | popf |
3545 | hidnplayr | 690 | xor eax, eax |
5045 | hidnplayr | 691 | ret |
3545 | hidnplayr | 692 | |
693 | .wait_to_send: |
||
694 | DEBUGF 1, "Waiting for timeout\n" |
||
695 | |||
696 | push edx |
||
697 | mov esi, 30 |
||
5045 | hidnplayr | 698 | invoke Sleep |
3545 | hidnplayr | 699 | pop edx |
700 | |||
701 | in ax, dx |
||
702 | test ax, (1 shl BIT_OWN) |
||
703 | jnz .send_packet |
||
704 | |||
705 | pusha |
||
706 | call reset ; if chip hung, reset it |
||
707 | popa |
||
708 | |||
709 | jmp .send_packet |
||
710 | |||
711 | .fail: |
||
3856 | hidnplayr | 712 | DEBUGF 2, "transmit failed!\n" |
5045 | hidnplayr | 713 | invoke KernelFree, [bufferptr] |
714 | popf |
||
3545 | hidnplayr | 715 | or eax, -1 |
5045 | hidnplayr | 716 | ret |
3545 | hidnplayr | 717 | |
5045 | hidnplayr | 718 | endp |
3545 | hidnplayr | 719 | |
720 | |||
721 | |||
722 | |||
5045 | hidnplayr | 723 | |
3545 | hidnplayr | 724 | ;;;;;;;;;;;;;;;;;;;;;;; |
725 | ;; ;; |
||
726 | ;; Interrupt handler ;; |
||
727 | ;; ;; |
||
728 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
729 | |||
730 | align 4 |
||
731 | int_handler: |
||
732 | |||
733 | push ebx esi edi |
||
734 | |||
3856 | hidnplayr | 735 | DEBUGF 1, "INT\n" |
3545 | hidnplayr | 736 | |
737 | ; find pointer of device wich made IRQ occur |
||
738 | mov ecx, [devices] |
||
739 | test ecx, ecx |
||
740 | jz .nothing |
||
741 | mov esi, device_list |
||
742 | .nextdevice: |
||
743 | mov ebx, [esi] |
||
744 | |||
5045 | hidnplayr | 745 | set_io [ebx + device.io_addr], 0 |
746 | set_io [ebx + device.io_addr], REG_ISR |
||
3545 | hidnplayr | 747 | in ax, dx ; Get interrupt status |
748 | out dx, ax ; send it back to ACK |
||
749 | test ax, ax |
||
750 | jnz .got_it |
||
751 | .continue: |
||
752 | add esi, 4 |
||
753 | dec ecx |
||
754 | jnz .nextdevice |
||
755 | .nothing: |
||
756 | pop edi esi ebx |
||
757 | xor eax, eax |
||
758 | |||
759 | ret ; If no device was found, abort (The irq was probably for a device, not registered to this driver) |
||
760 | |||
761 | .got_it: |
||
762 | |||
763 | DEBUGF 1, "Device: %x Status: %x\n", ebx, ax |
||
764 | |||
765 | ;---------------------------------------------------- |
||
766 | ; Received packet ok? |
||
767 | |||
768 | test ax, ISR_ROK |
||
769 | jz @f |
||
770 | push ax |
||
771 | |||
772 | .receive: |
||
5045 | hidnplayr | 773 | set_io [ebx + device.io_addr], 0 |
774 | set_io [ebx + device.io_addr], REG_COMMAND |
||
3545 | hidnplayr | 775 | in al, dx |
776 | test al, BUFE ; test if RX buffer is empty |
||
777 | jnz .finish |
||
778 | |||
3856 | hidnplayr | 779 | DEBUGF 1, "RX:\n" |
3545 | hidnplayr | 780 | |
5045 | hidnplayr | 781 | mov eax, [ebx + device.rx_buffer] |
782 | add eax, [ebx + device.rx_data_offset] |
||
3545 | hidnplayr | 783 | test byte [eax], (1 shl BIT_ROK) ; check if packet is ok |
784 | jz .reset_rx |
||
785 | |||
786 | ; packet is ok, copy it |
||
787 | movzx ecx, word [eax+2] ; packet length |
||
788 | sub cx, 4 ; don't copy CRC |
||
789 | |||
790 | ; Update stats |
||
5045 | hidnplayr | 791 | add dword [ebx + device.bytes_rx], ecx |
792 | adc dword [ebx + device.bytes_rx + 4], 0 |
||
793 | inc [ebx + device.packets_rx] |
||
3545 | hidnplayr | 794 | |
795 | DEBUGF 1, "Received %u bytes\n", ecx |
||
796 | |||
797 | push ebx eax ecx |
||
5045 | hidnplayr | 798 | invoke KernelAlloc, ecx ; Allocate a buffer to put packet into |
3545 | hidnplayr | 799 | pop ecx |
800 | test eax, eax ; Test if we allocated succesfully |
||
801 | jz .abort |
||
802 | |||
803 | mov edi, eax ; Where we will copy too |
||
804 | |||
805 | mov esi, [esp] ; The buffer we will copy from |
||
806 | add esi, 4 ; Dont copy CRC |
||
807 | |||
808 | push dword .abort ; Kernel will return to this address after EthReceiver |
||
809 | push ecx edi ; Save buffer pointer and size, to pass to kernel |
||
810 | |||
811 | .copy: |
||
812 | shr ecx, 1 |
||
813 | jnc .nb |
||
814 | movsb |
||
815 | .nb: |
||
816 | shr ecx, 1 |
||
817 | jnc .nw |
||
818 | movsw |
||
819 | .nw: |
||
820 | jz .nd |
||
821 | rep movsd |
||
822 | .nd: |
||
823 | |||
5045 | hidnplayr | 824 | jmp [Eth_input] ; Send it to kernel |
3545 | hidnplayr | 825 | |
826 | .abort: |
||
827 | pop eax ebx |
||
828 | ; update eth_data_start_offset |
||
829 | movzx eax, word [eax+2] ; packet length |
||
5045 | hidnplayr | 830 | add eax, [ebx + device.rx_data_offset] |
3545 | hidnplayr | 831 | add eax, 4+3 ; packet header is 4 bytes long + dword alignment |
832 | and eax, not 3 ; dword alignment |
||
833 | |||
834 | cmp eax, RX_BUFFER_SIZE |
||
835 | jb .no_wrap |
||
3856 | hidnplayr | 836 | DEBUGF 1, "Wrapping\n" |
3545 | hidnplayr | 837 | sub eax, RX_BUFFER_SIZE |
838 | .no_wrap: |
||
5045 | hidnplayr | 839 | mov [ebx + device.rx_data_offset], eax |
3545 | hidnplayr | 840 | DEBUGF 1, "New RX ptr: %d\n", eax |
841 | |||
5045 | hidnplayr | 842 | set_io [ebx + device.io_addr], 0 |
843 | set_io [ebx + device.io_addr], REG_CAPR ; update 'Current Address of Packet Read register' |
||
3545 | hidnplayr | 844 | sub eax, 0x10 ; value 0x10 is a constant for CAPR |
3857 | hidnplayr | 845 | out dx, ax |
3545 | hidnplayr | 846 | |
847 | jmp .receive ; check for multiple packets |
||
848 | |||
849 | .reset_rx: |
||
850 | test byte [eax], (1 shl BIT_CRC) |
||
851 | jz .no_crc_error |
||
3856 | hidnplayr | 852 | DEBUGF 2, "RX: CRC error!\n" |
3545 | hidnplayr | 853 | |
854 | .no_crc_error: |
||
855 | test byte [eax], (1 shl BIT_FAE) |
||
856 | jz .no_fae_error |
||
3856 | hidnplayr | 857 | DEBUGF 2, "RX: Frame alignment error!\n" |
3545 | hidnplayr | 858 | |
859 | .no_fae_error: |
||
860 | DEBUGF 1, "Reset RX\n" |
||
861 | in al, dx ; read command register |
||
862 | push ax |
||
863 | and al, not (1 shl BIT_RE) ; Clear the RE bit |
||
864 | out dx, al |
||
865 | pop ax |
||
866 | out dx, al ; write original command back |
||
867 | |||
868 | add edx, REG_RXCONFIG - REG_COMMAND ; Restore RX configuration |
||
869 | mov ax, RX_CONFIG |
||
870 | out dx, ax |
||
871 | |||
872 | .finish: |
||
873 | pop ax |
||
874 | |||
875 | ;---------------------------------------------------- |
||
876 | ; Transmit ok / Transmit error |
||
877 | @@: |
||
878 | test ax, ISR_TOK + ISR_TER |
||
879 | jz @f |
||
880 | |||
3857 | hidnplayr | 881 | DEBUGF 1, "Transmit done!\n" |
882 | |||
3545 | hidnplayr | 883 | push ax |
884 | mov ecx, (NUM_TX_DESC-1)*4 |
||
885 | .txdescloop: |
||
5045 | hidnplayr | 886 | set_io [ebx + device.io_addr], 0 |
887 | set_io [ebx + device.io_addr], REG_TSD0 |
||
3545 | hidnplayr | 888 | add edx, ecx |
889 | in eax, dx |
||
890 | |||
891 | test eax, TSR_OWN ; DMA operation completed |
||
892 | jz .notthisone |
||
893 | |||
5045 | hidnplayr | 894 | cmp [ebx + device.TX_DESC+ecx], 0 |
3545 | hidnplayr | 895 | je .notthisone |
896 | |||
3857 | hidnplayr | 897 | DEBUGF 1, "TSD: 0x%x\n", eax |
3545 | hidnplayr | 898 | |
3857 | hidnplayr | 899 | test eax, TSR_TUN |
900 | jz .no_bun |
||
901 | DEBUGF 2, "TX: FIFO Buffer underrun!\n" |
||
902 | |||
903 | .no_bun: |
||
904 | test eax, TSR_OWC |
||
905 | jz .no_owc |
||
906 | DEBUGF 2, "TX: OWC!\n" |
||
907 | |||
908 | .no_owc: |
||
909 | test eax, TSR_TABT |
||
910 | jz .no_tabt |
||
911 | DEBUGF 2, "TX: TABT!\n" |
||
912 | |||
913 | .no_tabt: |
||
914 | test eax, TSR_CRS |
||
915 | jz .no_csl |
||
916 | DEBUGF 2, "TX: Carrier Sense Lost!\n" |
||
917 | |||
918 | .no_csl: |
||
919 | test eax, TSR_TOK |
||
920 | jz .no_tok |
||
921 | DEBUGF 1, "TX: Transmit OK!\n" |
||
922 | |||
923 | .no_tok: |
||
5045 | hidnplayr | 924 | DEBUGF 1, "free transmit buffer 0x%x\n", [ebx + device.TX_DESC+ecx]:8 |
3545 | hidnplayr | 925 | push ecx ebx |
5045 | hidnplayr | 926 | invoke KernelFree, [ebx + device.TX_DESC+ecx] |
3545 | hidnplayr | 927 | pop ebx ecx |
5045 | hidnplayr | 928 | mov [ebx + device.TX_DESC+ecx], 0 |
3545 | hidnplayr | 929 | |
930 | .notthisone: |
||
931 | sub ecx, 4 |
||
3857 | hidnplayr | 932 | jae .txdescloop |
3545 | hidnplayr | 933 | pop ax |
934 | |||
935 | ;---------------------------------------------------- |
||
936 | ; Rx buffer overflow ? |
||
937 | @@: |
||
938 | test ax, ISR_RXOVW |
||
939 | jz @f |
||
940 | |||
941 | push ax |
||
3856 | hidnplayr | 942 | DEBUGF 2, "RX:buffer overflow!\n" |
3545 | hidnplayr | 943 | |
5045 | hidnplayr | 944 | set_io [ebx + device.io_addr], 0 |
945 | set_io [ebx + device.io_addr], REG_ISR |
||
3545 | hidnplayr | 946 | mov ax, ISR_FIFOOVW or ISR_RXOVW |
947 | out dx, ax |
||
948 | pop ax |
||
949 | |||
950 | ;---------------------------------------------------- |
||
951 | ; Packet underrun? |
||
952 | @@: |
||
953 | test ax, ISR_PUN |
||
954 | jz @f |
||
955 | |||
4449 | hidnplayr | 956 | DEBUGF 1, "Packet underrun or link changed!\n" |
3545 | hidnplayr | 957 | |
4449 | hidnplayr | 958 | call cable |
959 | |||
3545 | hidnplayr | 960 | ;---------------------------------------------------- |
961 | ; Receive FIFO overflow ? |
||
962 | @@: |
||
963 | test ax, ISR_FIFOOVW |
||
964 | jz @f |
||
965 | |||
966 | push ax |
||
4449 | hidnplayr | 967 | DEBUGF 2, "RX fifo overflow!\n" |
3545 | hidnplayr | 968 | |
5045 | hidnplayr | 969 | set_io [ebx + device.io_addr], 0 |
970 | set_io [ebx + device.io_addr], REG_ISR |
||
3545 | hidnplayr | 971 | mov ax, ISR_FIFOOVW or ISR_RXOVW |
972 | out dx, ax |
||
973 | pop ax |
||
974 | |||
975 | ;---------------------------------------------------- |
||
4449 | hidnplayr | 976 | ; cable length changed ? |
3545 | hidnplayr | 977 | @@: |
978 | test ax, ISR_LENCHG |
||
979 | jz .fail |
||
980 | |||
4449 | hidnplayr | 981 | DEBUGF 2, "Cable length changed!\n" |
982 | |||
3545 | hidnplayr | 983 | call cable |
984 | |||
985 | .fail: |
||
986 | pop edi esi ebx |
||
987 | xor eax, eax |
||
988 | inc eax |
||
989 | |||
990 | ret |
||
991 | |||
992 | |||
993 | |||
994 | |||
995 | ;;;;;;;;;;;;;;;;;;;;;;;;; |
||
996 | ;; ;; |
||
997 | ;; Update Cable status ;; |
||
998 | ;; ;; |
||
999 | ;;;;;;;;;;;;;;;;;;;;;;;;; |
||
1000 | |||
1001 | align 4 |
||
1002 | cable: |
||
3857 | hidnplayr | 1003 | DEBUGF 1, "Checking link status:\n" |
3545 | hidnplayr | 1004 | |
5045 | hidnplayr | 1005 | set_io [ebx + device.io_addr], 0 |
1006 | set_io [ebx + device.io_addr], REG_MSR |
||
3545 | hidnplayr | 1007 | in al, dx |
1008 | |||
1009 | test al, 1 shl 2 ; 0 = link ok 1 = link fail |
||
1010 | jnz .notconnected |
||
1011 | |||
1012 | test al, 1 shl 3 ; 0 = 100 Mbps 1 = 10 Mbps |
||
1013 | jnz .10mbps |
||
1014 | |||
1015 | .100mbps: |
||
5045 | hidnplayr | 1016 | mov [ebx + device.state], ETH_LINK_100M |
1017 | invoke NetLinkChanged |
||
4449 | hidnplayr | 1018 | DEBUGF 2, "link changed to 100 mbit\n" |
3545 | hidnplayr | 1019 | |
1020 | ret |
||
1021 | |||
1022 | .10mbps: |
||
5045 | hidnplayr | 1023 | mov [ebx + device.state], ETH_LINK_10M |
1024 | invoke NetLinkChanged |
||
4449 | hidnplayr | 1025 | DEBUGF 2, "link changed to 10 mbit\n" |
3545 | hidnplayr | 1026 | |
1027 | ret |
||
1028 | |||
1029 | .notconnected: |
||
5045 | hidnplayr | 1030 | mov [ebx + device.state], ETH_LINK_DOWN |
1031 | invoke NetLinkChanged |
||
4449 | hidnplayr | 1032 | DEBUGF 2, "no link\n" |
3545 | hidnplayr | 1033 | |
1034 | ret |
||
1035 | |||
1036 | |||
1037 | |||
1038 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
1039 | ;; ;; |
||
1040 | ;; Write MAC address ;; |
||
1041 | ;; ;; |
||
1042 | ;;;;;;;;;;;;;;;;;;;;;;; |
||
1043 | |||
1044 | align 4 |
||
1045 | write_mac: ; in: mac pushed onto stack (as 3 words) |
||
1046 | |||
3856 | hidnplayr | 1047 | DEBUGF 1, "Writing MAC\n" |
3545 | hidnplayr | 1048 | |
1049 | ; disable all in command registers |
||
5045 | hidnplayr | 1050 | set_io [ebx + device.io_addr], 0 |
1051 | set_io [ebx + device.io_addr], REG_9346CR |
||
3545 | hidnplayr | 1052 | xor eax, eax |
1053 | out dx, al |
||
1054 | |||
5045 | hidnplayr | 1055 | set_io [ebx + device.io_addr], REG_IMR |
3545 | hidnplayr | 1056 | xor eax, eax |
1057 | out dx, ax |
||
1058 | |||
5045 | hidnplayr | 1059 | set_io [ebx + device.io_addr], REG_ISR |
3545 | hidnplayr | 1060 | mov eax, -1 |
1061 | out dx, ax |
||
1062 | |||
1063 | ; enable writing |
||
5045 | hidnplayr | 1064 | set_io [ebx + device.io_addr], REG_9346CR |
3545 | hidnplayr | 1065 | mov eax, REG_9346CR_WE |
1066 | out dx, al |
||
1067 | |||
1068 | ; write the mac ... |
||
5045 | hidnplayr | 1069 | set_io [ebx + device.io_addr], REG_IDR0 |
3545 | hidnplayr | 1070 | pop eax |
1071 | out dx, eax |
||
1072 | |||
5045 | hidnplayr | 1073 | set_io [ebx + device.io_addr], REG_IDR0+4 |
3545 | hidnplayr | 1074 | xor eax, eax |
1075 | pop ax |
||
1076 | out dx, eax |
||
1077 | |||
1078 | ; disable writing |
||
5045 | hidnplayr | 1079 | set_io [ebx + device.io_addr], REG_9346CR |
3545 | hidnplayr | 1080 | xor eax, eax |
1081 | out dx, al |
||
1082 | |||
3856 | hidnplayr | 1083 | DEBUGF 1, "MAC write ok!\n" |
3545 | hidnplayr | 1084 | |
1085 | ; Notice this procedure does not ret, but continues to read_mac instead. |
||
1086 | |||
1087 | |||
1088 | ;;;;;;;;;;;;;;;;;;;;;; |
||
1089 | ;; ;; |
||
1090 | ;; Read MAC address ;; |
||
1091 | ;; ;; |
||
1092 | ;;;;;;;;;;;;;;;;;;;;;; |
||
1093 | |||
1094 | read_mac: |
||
3857 | hidnplayr | 1095 | DEBUGF 1, "Reading MAC:\n" |
3545 | hidnplayr | 1096 | |
5045 | hidnplayr | 1097 | set_io [ebx + device.io_addr], 0 |
1098 | lea edi, [ebx + device.mac] |
||
3545 | hidnplayr | 1099 | in eax, dx |
1100 | stosd |
||
1101 | add edx, 4 |
||
1102 | in ax, dx |
||
1103 | stosw |
||
1104 | |||
3857 | hidnplayr | 1105 | DEBUGF 1, "%x-%x-%x-%x-%x-%x\n",[edi-6]:2,[edi-5]:2,[edi-4]:2,[edi-3]:2,[edi-2]:2,[edi-1]:2 |
3545 | hidnplayr | 1106 | |
1107 | ret |
||
1108 | |||
1109 | |||
1110 | ; End of code |
||
1111 | |||
5045 | hidnplayr | 1112 | data fixups |
1113 | end data |
||
3545 | hidnplayr | 1114 | |
5045 | hidnplayr | 1115 | include '../peimport.inc' |
1116 | |||
3545 | hidnplayr | 1117 | my_service db 'RTL8139',0 ; max 16 chars include zero |
1118 | |||
1119 | device_1 db 'Realtek 8139',0 |
||
1120 | device_2 db 'Realtek 8139A',0 |
||
1121 | device_3 db 'Realtek 8139B',0 |
||
1122 | device_4 db 'Realtek 8139C',0 |
||
1123 | device_5 db 'Realtek 8100',0 |
||
1124 | device_6 db 'Realtek 8139D',0 |
||
1125 | device_7 db 'Realtek 8139CP',0 |
||
1126 | device_8 db 'Realtek 8101',0 |
||
1127 | device_unknown db 'Unknown RTL8139 clone', 0 |
||
1128 | |||
1129 | crosslist: |
||
1130 | dd device_1 |
||
1131 | dd device_2 |
||
1132 | dd device_3 |
||
1133 | dd device_4 |
||
1134 | dd device_5 |
||
1135 | dd device_6 |
||
1136 | dd device_7 |
||
1137 | dd device_8 |
||
1138 | dd device_unknown |
||
1139 | |||
1140 | hw_ver_array: ; This array is used by the probe routine to find out wich version of the RTL8139 we are working with |
||
1141 | db VER_RTL8139 |
||
1142 | db VER_RTL8139A |
||
1143 | db VER_RTL8139B |
||
1144 | db VER_RTL8139C |
||
1145 | db VER_RTL8100 |
||
1146 | db VER_RTL8139D |
||
1147 | db VER_RTL8139CP |
||
1148 | db VER_RTL8101 |
||
1149 | db 0 |
||
1150 | |||
1151 | HW_VER_ARRAY_SIZE = $-hw_ver_array |
||
1152 | |||
1153 | include_debug_strings ; All data wich FDO uses will be included here |
||
1154 | |||
5045 | hidnplayr | 1155 | align 4 |
1156 | devices dd 0 |
||
3545 | hidnplayr | 1157 | device_list rd MAX_DEVICES ; This list contains all pointers to device structures the driver is handling> |
1158 |