Subversion Repositories Kolibri OS

# Makefile.in generated by automake 1.14.1 from Makefile.am.

# @configure_input@

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (c) 2007 Intel Corporation. All Rights Reserved.

#

# Permission is hereby granted, free of charge, to any person obtaining a

# copy of this software and associated documentation files (the

# "Software"), to deal in the Software without restriction, including

# without limitation the rights to use, copy, modify, merge, publish,

# distribute, sub license, and/or sell copies of the Software, and to

# permit persons to whom the Software is furnished to do so, subject to

# the following conditions:

#

# The above copyright notice and this permission notice (including the

# next paragraph) shall be included in all copies or substantial portions

# of the Software.

#

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS

# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

# IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR

# ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,

# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE

# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

VPATH = @srcdir@

am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'

am__make_running_with_option = \

  case $${target_option-} in \

      ?) ;; \

      *) echo "am__make_running_with_option: internal error: invalid" \

              "target option '$${target_option-}' specified" >&2; \

         exit 1;; \

  esac; \

  has_opt=no; \

  sane_makeflags=$$MAKEFLAGS; \

  if $(am__is_gnu_make); then \

    sane_makeflags=$$MFLAGS; \

  else \

    case $$MAKEFLAGS in \

      *\\[\ \	]*) \

        bs=\\; \

        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \

          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \

    esac; \

  fi; \

  skip_next=no; \

  strip_trailopt () \

  { \

    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \

  }; \

  for flg in $$sane_makeflags; do \

    test $$skip_next = yes && { skip_next=no; continue; }; \

    case $$flg in \

      *=*|--*) continue;; \

        -*I) strip_trailopt 'I'; skip_next=yes;; \

      -*I?*) strip_trailopt 'I';; \

        -*O) strip_trailopt 'O'; skip_next=yes;; \

      -*O?*) strip_trailopt 'O';; \

        -*l) strip_trailopt 'l'; skip_next=yes;; \

      -*l?*) strip_trailopt 'l';; \

      -[dEDm]) skip_next=yes;; \

      -[JT]) skip_next=yes;; \

    esac; \

    case $$flg in \

      *$$target_option*) has_opt=yes; break;; \

    esac; \

  done; \

  test $$has_opt = yes

am__make_dryrun = (target_option=n; $(am__make_running_with_option))

am__make_keepgoing = (target_option=k; $(am__make_running_with_option))

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

subdir = .

DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \

	$(top_srcdir)/configure $(am__configure_deps) \

	$(srcdir)/config.h.in COPYING NEWS compile config.guess \

	config.sub depcomp install-sh missing ltmain.sh

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

	$(ACLOCAL_M4)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

 configure.lineno config.status.lineno

mkinstalldirs = $(install_sh) -d

CONFIG_HEADER = config.h

CONFIG_CLEAN_FILES =

CONFIG_CLEAN_VPATH_FILES =

AM_V_P = $(am__v_P_@AM_V@)

am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

am__v_P_0 = false

am__v_P_1 = :

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo "  GEN     " $@;

am__v_GEN_1 =

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

am__v_at_1 =

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \

	ctags-recursive dvi-recursive html-recursive info-recursive \

	install-data-recursive install-dvi-recursive \

	install-exec-recursive install-html-recursive \

	install-info-recursive install-pdf-recursive \

	install-ps-recursive install-recursive installcheck-recursive \

	installdirs-recursive pdf-recursive ps-recursive \

	tags-recursive uninstall-recursive

am__can_run_installinfo = \

  case $$AM_UPDATE_INFO_DIR in \

    n|no|NO) false;; \

    *) (install-info --version) >/dev/null 2>&1;; \

  esac

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\

  distclean-recursive maintainer-clean-recursive

am__recursive_targets = \

  $(RECURSIVE_TARGETS) \

  $(RECURSIVE_CLEAN_TARGETS) \

  $(am__extra_recursive_targets)

AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \

	cscope distdir dist dist-all distcheck

am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \

	$(LISP)config.h.in

# Read a list of newline-separated strings from the standard input,

# and print each of them once, without duplicates.  Input order is

# *not* preserved.

am__uniquify_input = $(AWK) '\

  BEGIN { nonempty = 0; } \

  { items[$$0] = 1; nonempty = 1; } \

  END { if (nonempty) { for (i in items) print i; }; } \

'

# Make sure the list of sources is unique.  This is necessary because,

# e.g., the same source file might be shared among _SOURCES variables

# for different programs/libraries.

am__define_uniq_tagged_files = \

  list='$(am__tagged_files)'; \

  unique=`for i in $$list; do \

    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

  done | $(am__uniquify_input)`

ETAGS = etags

CTAGS = ctags

CSCOPE = cscope

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

distdir = $(PACKAGE)-$(VERSION)

top_distdir = $(distdir)

am__remove_distdir = \

  if test -d "$(distdir)"; then \

    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

      && rm -rf "$(distdir)" \

      || { sleep 5 && rm -rf "$(distdir)"; }; \

  else :; fi

am__post_remove_distdir = $(am__remove_distdir)

am__relativize = \

  dir0=`pwd`; \

  sed_first='s,^\([^/]*\)/.*$$,\1,'; \

  sed_rest='s,^[^/]*/*,,'; \

  sed_last='s,^.*/\([^/]*\)$$,\1,'; \

  sed_butlast='s,/*[^/]*$$,,'; \

  while test -n "$$dir1"; do \

    first=`echo "$$dir1" | sed -e "$$sed_first"`; \

    if test "$$first" != "."; then \

      if test "$$first" = ".."; then \

        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

      else \

        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

        if test "$$first2" = "$$first"; then \

          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

        else \

          dir2="../$$dir2"; \

        fi; \

        dir0="$$dir0"/"$$first"; \

      fi; \

    fi; \

    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

  done; \

  reldir="$$dir2"

DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2

GZIP_ENV = --best

DIST_TARGETS = dist-bzip2 dist-gzip

distuninstallcheck_listfiles = find . -type f -print

am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \

  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'

distcleancheck_listfiles = find . -type f -print

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

CC = @CC@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXDEPMODE = @CXXDEPMODE@

CXXFLAGS = @CXXFLAGS@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DOXYGEN = @DOXYGEN@

DRM_CFLAGS = @DRM_CFLAGS@

DRM_LIBS = @DRM_LIBS@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGL_CFLAGS = @EGL_CFLAGS@

EGL_LIBS = @EGL_LIBS@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

FGREP = @FGREP@

GLX_CFLAGS = @GLX_CFLAGS@

GLX_LIBS = @GLX_LIBS@

GREP = @GREP@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LD = @LD@

LDFLAGS = @LDFLAGS@

LIBDRM_VERSION = @LIBDRM_VERSION@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTOOL = @LIBTOOL@

LIBVA_DRIVERS_PATH = @LIBVA_DRIVERS_PATH@

LIBVA_LT_LDFLAGS = @LIBVA_LT_LDFLAGS@

LIBVA_LT_VERSION = @LIBVA_LT_VERSION@

LIBVA_MAJOR_VERSION = @LIBVA_MAJOR_VERSION@

LIBVA_MICRO_VERSION = @LIBVA_MICRO_VERSION@

LIBVA_MINOR_VERSION = @LIBVA_MINOR_VERSION@

LIBVA_VERSION = @LIBVA_VERSION@

LIPO = @LIPO@

LN_S = @LN_S@

LTLIBOBJS = @LTLIBOBJS@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

PKG_CONFIG = @PKG_CONFIG@

PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@

PKG_CONFIG_PATH = @PKG_CONFIG_PATH@

RANLIB = @RANLIB@

SED = @SED@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

TODAY = @TODAY@

VA_API_MAJOR_VERSION = @VA_API_MAJOR_VERSION@

VA_API_MICRO_VERSION = @VA_API_MICRO_VERSION@

VA_API_MINOR_VERSION = @VA_API_MINOR_VERSION@

VA_API_VERSION = @VA_API_VERSION@

VERSION = @VERSION@

WAYLAND_API_VERSION = @WAYLAND_API_VERSION@

WAYLAND_CFLAGS = @WAYLAND_CFLAGS@

WAYLAND_LIBS = @WAYLAND_LIBS@

WAYLAND_SCANNER_CFLAGS = @WAYLAND_SCANNER_CFLAGS@

WAYLAND_SCANNER_LIBS = @WAYLAND_SCANNER_LIBS@

X11_CFLAGS = @X11_CFLAGS@

X11_LIBS = @X11_LIBS@

XEXT_CFLAGS = @XEXT_CFLAGS@

XEXT_LIBS = @XEXT_LIBS@

XFIXES_CFLAGS = @XFIXES_CFLAGS@

XFIXES_LIBS = @XFIXES_LIBS@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

pkgconfigdir = @pkgconfigdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target_alias = @target_alias@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

wayland_protocoldir = @wayland_protocoldir@

wayland_scanner = @wayland_scanner@

ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}

AUTOMAKE_OPTIONS = foreign

SUBDIRS = va dummy_drv_video pkgconfig test debian.upstream doc

# Extra clean files so that maintainer-clean removes *everything*

MAINTAINERCLEANFILES = \

	aclocal.m4 compile config.guess config.sub \

	configure depcomp install-sh ltmain.sh     \

	Makefile.in missing

DEB_BUILDDIR = debian.build

all: config.h

	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:

am--refresh: Makefile

	@:

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

	@for dep in $?; do \

	  case '$(am__configure_deps)' in \

	    *$$dep*) \

	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \

	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \

		&& exit 0; \

	      exit 1;; \

	  esac; \

	done; \

	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \

	$(am__cd) $(top_srcdir) && \

	  $(AUTOMAKE) --foreign Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

	@case '$?' in \

	  *config.status*) \

	    echo ' $(SHELL) ./config.status'; \

	    $(SHELL) ./config.status;; \

	  *) \

	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \

	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \

	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)

	$(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps):

config.h: stamp-h1

	@test -f $@ || rm -f stamp-h1

	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status

	@rm -f stamp-h1

	cd $(top_builddir) && $(SHELL) ./config.status config.h

$(srcdir)/config.h.in:  $(am__configure_deps)

	($(am__cd) $(top_srcdir) && $(AUTOHEADER))

	rm -f stamp-h1

	touch $@

distclean-hdr:

	-rm -f config.h stamp-h1

mostlyclean-libtool:

	-rm -f *.lo

clean-libtool:

	-rm -rf .libs _libs

distclean-libtool:

	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd

# into them and run 'make' without going through this Makefile.

# To change the values of 'make' variables: instead of editing Makefiles,

# (1) if the variable is set in 'config.status', edit 'config.status'

#     (which will cause the Makefiles to be regenerated when you run 'make');

# (2) otherwise, pass the desired values on the 'make' command line.

$(am__recursive_targets):

	@fail=; \

	if $(am__make_keepgoing); then \

	  failcom='fail=yes'; \

	else \

	  failcom='exit 1'; \

	fi; \

	dot_seen=no; \

	target=`echo $@ | sed s/-recursive//`; \

	case "$@" in \

	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

	  *) list='$(SUBDIRS)' ;; \

	esac; \

	for subdir in $$list; do \

	  echo "Making $$target in $$subdir"; \

	  if test "$$subdir" = "."; then \

	    dot_seen=yes; \

	    local_target="$$target-am"; \

	  else \

	    local_target="$$target"; \

	  fi; \

	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

	  || eval $$failcom; \

	done; \

	if test "$$dot_seen" = "no"; then \

	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

	fi; test -z "$$fail"

ID: $(am__tagged_files)

	$(am__define_uniq_tagged_files); mkid -fID $$unique

tags: tags-recursive

TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

	set x; \

	here=`pwd`; \

	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

	  include_option=--etags-include; \

	  empty_fix=.; \

	else \

	  include_option=--include; \

	  empty_fix=; \

	fi; \

	list='$(SUBDIRS)'; for subdir in $$list; do \

	  if test "$$subdir" = .; then :; else \

	    test ! -f $$subdir/TAGS || \

	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

	  fi; \

	done; \

	$(am__define_uniq_tagged_files); \

	shift; \

	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

	  test -n "$$unique" || unique=$$empty_fix; \

	  if test $$# -gt 0; then \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      "$$@" $$unique; \

	  else \

	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

	      $$unique; \

	  fi; \

	fi

ctags: ctags-recursive

CTAGS: ctags

ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

	$(am__define_uniq_tagged_files); \

	test -z "$(CTAGS_ARGS)$$unique" \

	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

	     $$unique

GTAGS:

	here=`$(am__cd) $(top_builddir) && pwd` \

	  && $(am__cd) $(top_srcdir) \

	  && gtags -i $(GTAGS_ARGS) "$$here"

cscope: cscope.files

	test ! -s cscope.files \

	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)

clean-cscope:

	-rm -f cscope.files

cscope.files: clean-cscope cscopelist

cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)

	list='$(am__tagged_files)'; \

	case "$(srcdir)" in \

	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

	  *) sdir=$(subdir)/$(srcdir) ;; \

	esac; \

	for i in $$list; do \

	  if test -f "$$i"; then \

	    echo "$(subdir)/$$i"; \

	  else \

	    echo "$$sdir/$$i"; \

	  fi; \

	done >> $(top_builddir)/cscope.files

distclean-tags:

	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(DISTFILES)

	$(am__remove_distdir)

	test -d "$(distdir)" || mkdir "$(distdir)"

	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

	list='$(DISTFILES)'; \

	  dist_files=`for file in $$list; do echo $$file; done | \

	  sed -e "s|^$$srcdirstrip/||;t" \

	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

	case $$dist_files in \

	  */*) $(MKDIR_P) `echo "$$dist_files" | \

			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

			   sort -u` ;; \

	esac; \

	for file in $$dist_files; do \

	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

	  if test -d $$d/$$file; then \

	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

	    if test -d "$(distdir)/$$file"; then \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

	    fi; \

	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

	  else \

	    test -f "$(distdir)/$$file" \

	    || cp -p $$d/$$file "$(distdir)/$$file" \

	    || exit 1; \

	  fi; \

	done

	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

	  if test "$$subdir" = .; then :; else \

	    $(am__make_dryrun) \

	      || test -d "$(distdir)/$$subdir" \

	      || $(MKDIR_P) "$(distdir)/$$subdir" \

	      || exit 1; \

	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

	    $(am__relativize); \

	    new_distdir=$$reldir; \

	    dir1=$$subdir; dir2="$(top_distdir)"; \

	    $(am__relativize); \

	    new_top_distdir=$$reldir; \

	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

	    ($(am__cd) $$subdir && \

	      $(MAKE) $(AM_MAKEFLAGS) \

	        top_distdir="$$new_top_distdir" \

	        distdir="$$new_distdir" \

		am__remove_distdir=: \

		am__skip_length_check=: \

		am__skip_mode_fix=: \

	        distdir) \

	      || exit 1; \

	  fi; \

	done

	-test -n "$(am__skip_mode_fix)" \

	|| find "$(distdir)" -type d ! -perm -755 \

		-exec chmod u+rwx,go+rx {} \; -o \

	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

	|| chmod -R a+r "$(distdir)"

dist-gzip: distdir

	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

	$(am__post_remove_distdir)

dist-bzip2: distdir

	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2

	$(am__post_remove_distdir)

dist-lzip: distdir

	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz

	$(am__post_remove_distdir)

dist-xz: distdir

	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz

	$(am__post_remove_distdir)

dist-tarZ: distdir

	@echo WARNING: "Support for shar distribution archives is" \

	               "deprecated." >&2

	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2

	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

	$(am__post_remove_distdir)

dist-shar: distdir

	@echo WARNING: "Support for distribution archives compressed with" \

		       "legacy program 'compress' is deprecated." >&2

	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2

	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz

	$(am__post_remove_distdir)

dist-zip: distdir

	-rm -f $(distdir).zip

	zip -rq $(distdir).zip $(distdir)

	$(am__post_remove_distdir)

dist dist-all:

	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'

	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then

# it guarantees that the distribution is self-contained by making another

# tarfile.

distcheck: dist

	case '$(DIST_ARCHIVES)' in \

	*.tar.gz*) \

	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\

	*.tar.bz2*) \

	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

	*.tar.lz*) \

	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\

	*.tar.xz*) \

	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\

	*.tar.Z*) \

	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

	*.shar.gz*) \

	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\

	*.zip*) \

	  unzip $(distdir).zip ;;\

	esac

	chmod -R a-w $(distdir)

	chmod u+w $(distdir)

	mkdir $(distdir)/_build $(distdir)/_inst

	chmod a-w $(distdir)

	test -d $(distdir)/_build || exit 0; \

	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

	  && am__cwd=`pwd` \

	  && $(am__cd) $(distdir)/_build \

	  && ../configure \

	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \

	    $(DISTCHECK_CONFIGURE_FLAGS) \

	    --srcdir=.. --prefix="$$dc_install_base" \

	  && $(MAKE) $(AM_MAKEFLAGS) \

	  && $(MAKE) $(AM_MAKEFLAGS) dvi \

	  && $(MAKE) $(AM_MAKEFLAGS) check \

	  && $(MAKE) $(AM_MAKEFLAGS) install \

	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \

	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \

	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

	        distuninstallcheck \

	  && chmod -R a-w "$$dc_install_base" \

	  && ({ \

	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \

	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

	      } || { rm -rf "$$dc_destdir"; exit 1; }) \

	  && rm -rf "$$dc_destdir" \

	  && $(MAKE) $(AM_MAKEFLAGS) dist \

	  && rm -rf $(DIST_ARCHIVES) \

	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

	  && cd "$$am__cwd" \

	  || exit 1

	$(am__post_remove_distdir)

	@(echo "$(distdir) archives ready for distribution: "; \

	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

	@test -n '$(distuninstallcheck_dir)' || { \

	  echo 'ERROR: trying to run $@ with an empty' \

	       '$$(distuninstallcheck_dir)' >&2; \

	  exit 1; \

	}; \

	$(am__cd) '$(distuninstallcheck_dir)' || { \

	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \

	  exit 1; \

	}; \

	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \

	   || { echo "ERROR: files left after uninstall:" ; \

	        if test -n "$(DESTDIR)"; then \

	          echo "  (check DESTDIR support)"; \

	        fi ; \

	        $(distuninstallcheck_listfiles) ; \

	        exit 1; } >&2

distcleancheck: distclean

	@if test '$(srcdir)' = . ; then \

	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \

	  exit 1 ; \

	fi

	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

	  || { echo "ERROR: files left in build directory after distclean:" ; \

	       $(distcleancheck_listfiles) ; \

	       exit 1; } >&2

check-am: all-am

check: check-recursive

all-am: Makefile config.h

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

	if test -z '$(STRIP)'; then \

	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

	      install; \

	else \

	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

	fi

mostlyclean-generic:

clean-generic:

distclean-generic:

	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:

	@echo "This command is intended for maintainers to use"

	@echo "it deletes files that may require special tools to rebuild."

	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)

clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive

	-rm -f $(am__CONFIG_DISTCLEAN_FILES)

	-rm -f Makefile

distclean-am: clean-am distclean-generic distclean-hdr \

	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

	-rm -f $(am__CONFIG_DISTCLEAN_FILES)

	-rm -rf $(top_srcdir)/autom4te.cache

	-rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \

	am--refresh check check-am clean clean-cscope clean-generic \

	clean-libtool cscope cscopelist-am ctags ctags-am dist \

	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \

	dist-xz dist-zip distcheck distclean distclean-generic \

	distclean-hdr distclean-libtool distclean-tags distcleancheck \

	distdir distuninstallcheck dvi dvi-am html html-am info \

	info-am install install-am install-data install-data-am \

	install-dvi install-dvi-am install-exec install-exec-am \

	install-html install-html-am install-info install-info-am \

	install-man install-pdf install-pdf-am install-ps \

	install-ps-am install-strip installcheck installcheck-am \

	installdirs installdirs-am maintainer-clean \

	maintainer-clean-generic mostlyclean mostlyclean-generic \

	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \

	uninstall-am

deb:

	@[ -d debian ] || ln -s debian.upstream debian

	dpkg-buildpackage -rfakeroot -uc -us

deb.upstream: dist

	-mkdir -p $(DEB_BUILDDIR)

	cd $(DEB_BUILDDIR)				&& \

	rm -rf $(PACKAGE)-$(VERSION)			&& \

	tar zxvf ../$(PACKAGE)-$(VERSION).tar.gz	&& \

	cd $(PACKAGE)-$(VERSION)			&& \

	$(MAKE) deb -f Makefile.am

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: