;***************************************************************
; project name: PCI Device Enumeration
; target platform: KolibriOS
; compiler: flat assmebler 1.66
; version: 2.1
; last update: April 2007
; maintained by: Jason Delozier (cordata51@hotmail.com)
; Sergey Kuzmin (kuzmin_serg@list.ru)
; Mihailov Ilia (ghost.nsk@gmail.com)
; project site: http://www.coolthemes.narod.ru/pcidev.html
;***************************************************************
;Summary: This program will attempt to scan the PCI Bus
; and display basic information about each device
; connected to the PCI Bus.
;***************************************************************
;HISTORY:
;keep dates in european format (dd/mm/yyyy), please
; '!' means big changes
;
;to-do:
; more vendors
; vendor's website
; Subsystem id and Subsystem vendor id detection
; Full device detection (like "ATI Radeon 9200") will increase app
; size a lot and probably it is function of particular drivers
;----------------------------------------------------------------
;2.1n: PCIDEV ??/04/2007
;Author: Mihailov Ilia aka Ghost <ghost.nsk@gmail.com>
;Features:
; added
; * new PCI API
;----------------------------------------------------------------
;2.1: PCIDEV ??/04/2007
;Author: Mihailov Ilia aka Ghost <ghost.nsk@gmail.com>
;Features:
; fixed
; * Same little bugs
; * Source code formating
; * PCI version normalized 0210 -> 2.10
; added
; * + 13 vendor (total now 1000!)
; * + 3 class type
; * Fast call source ready
; * Device IRQ detection
; optimized
; * ! size optimized (61025 -> 32501 see added)
; * easy to add new vendor & class names
;----------------------------------------------------------------
;2.0: PCIDEV 30/08/2006
;(it differs a lot from the version 1.0, which was introduced 19 months ago)
;Author: Marat Zakiyanov aka Mario79 <mario79@bk.ru>
; Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; added
; * Detection of Interface by Mario79
; * 122 vendor id's by Wildwest
; * Description is based on Class, SubClass and Interface now (PCI 3.0) by Wildwest
;----------------------------------------------------------------
;1.31: PCIDEV 13/05/2006
;Author: Jason Delozier <cordata51@hotmail.com>
;Features:
; fixed
; * ! bug in Company Name look up code that would cause Unknown Name errors.
; * ! possible bugs, many instructions missing byte, word, dword prefixes
; * ! possible bug which could have occured after removing "PREVIOUSVERSIONLIST"
; entry in loop up code and not fixing jump parameters.
; added
; * comments to various parts of the code
; optimized
; * various parts of the source, too many to remember and mention.
; * changed entries for Subclasses in vendors.inc to Byte format, saves a little space.
;----------------------------------------------------------------
;1.30: PCIDEV 11/05/2006
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; added
; * 3 new vendor id's (ESS from Madis Kalme and 2 id's
; forgotten from 1.15 release: Broadcom -SiByte and Chaintech Comp.)
; changed
; * I don't know why other devs (Jason or Victor) changed window style
; to old ugly one, so I changed it back to skinned type 3.
; * the same goes to the use of macroc.inc - it is enabled again.
; deleted
; * there is no more label "PREVIOUSVERSIONLIST" - id's moved to the
; appropriate parts of global list.
;----------------------------------------------------------------
;1.29: PCIDEV 30/04/2006
;Author: Jason Delozier <cordata51@hotmail.com>
;Features:
; fixed
; * ! bug that would not allow devices with device
; numbers > 16 to be displayed.
; added
; * ! another heading called "FNC" (function) which allows
; the multipurpose Device/Function varible to be split and
; displayed to the user properly.
; * horizontal bars to display for easier reading.
; optimized
; * vendor/description search routines for speed and space.
;----------------------------------------------------------------
;1.25: PCIDEV 02/10/2005
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; changed
; * ! Description is based on Class and SubClass
; now (PCI 3.0). The Names of Classes and SubClasses
; are in the end of Vendors.inc
; deleted
; * label "Descriptions" (names of Classes)
;
;----------------------------------------------------------------
;1.20: PCIDEV 16/08/2005
;Author: Victor Alberto Gil Hanla a.k.a. vhanla <vhanla@gmail.com>
;Features:
; added
; * ! many vendor lists (865)
; deleted
; * previous version's list
; changed
; * previous Company Name searching and printing
;----------------------------------------------------------------
;1.15: PCIDEV 03/06/2005
;Author: Sergey Kuzmin aka Wildwest <kuzmin_serg@list.ru>
;Features:
; added
; * quantity of devices,
; * ! detection of Company Name based on Vendor ID,
; * database of VenID (35 ID's),
; * macros.inc for smaller size,
; changed
; * interface+(skinned window),
; * VenID before DevID in 'table'(was DevID before VenID)
;----------------------------------------------------------------
;1.0: PCIDEV 30/01/2005
;Author: Jason Delozier
;Features:
; able to
; * detect PCI version,
; * quantity of PCI buses,
; * Vendor&Device ID for appropriate Device on Bus;
; * detect Revision, Class and Subclass of Device,
; * and make Description based on Class
;-------------------------------------------------------------
include 'macros.inc'
MEOS_APP_START
CODE
call draw_window
still: mcall 10 ; wait here for event
dec eax ; redraw request ?
jz red
dec eax ; key in buffer ?
jz key
dec eax ; button in buffer ?
jz button
jmp still
red: ; redraw
mcall 9, Proc_Info, -1 ; window redraw requested so get new window coordinates and size
mov eax, [Proc_Info.box.left]; store the window coordinates into the Form Structure
mov [Form + 2], ax ; x start position
mov eax, [Proc_Info.box.top];
mov [Form + 6], ax ; ystart position
mov eax, [Proc_Info.box.width];
mov [Form], ax ; window width
mov eax, [Proc_Info.box.height];
mov [Form + 4] ,ax ; window height
call draw_window ; go redraw window now
jmp still
key: ; key
mcall 2 ; just read it and ignore
jmp still
button: ; button
mcall 17 ; get id
cmp ah, 1 ; button id = 1 ?
jne still
mcall -1 ; close this program
draw_window:
mov byte [total], 0
mcall 12, 1 ; start of draw
; DRAW WINDOW
mcall 0, dword [Form], dword [Form + 4], 0x13ffffff, 0x805080d0, title
; Insert horizontal bars in list area
mov eax, 13 ; draw bar system function
mov ebx, 18 ; set Xstart position of bar
shl ebx, 16 ;
mov bx, word [Form] ; get width of window
sub bx, 32 ; bar is 32 pixels shorter then window width
mov ecx, 119 * 65536 + 10 ; set Ystart(109) and Height(10) of bar 109
mov edx, 0xC0C0C0 ; set color of bar
again: ;begin draw bar loop
mcall ; draw bar to window area
shr ecx, 16 ; move the Ystart position to working area
add ecx, 34 ; add 34 pixels to Y Start (moves bar down)
cmp cx, word [Form + 4] ; is the Ystart position outside of window area
jae nomo ; if so stop drawing bars
sub ecx, 14 ; if not, we only need 20 pixels between bar tops
shl ecx, 16 ; set that values as Ystart
add ecx, 10 ; Bar Height is always 10 pixels
jmp again ; draw another bar
nomo: ;done drawing bars here
; start PCI stuff
call Get_PCI_Info ; get pci version and last bus, scan for and draw each pci device
; Window inteface
mov cx, [PCI_Version]
add ch, '0'
mov [PCIWin + 85], ch ; 0xBADCODE but it work !
mov ch, cl
shr cl, 4
and ch, 0x0f
add cx, '00'
mov [PCIWin + 87], cx
mov cl, [PCI_LastBus]
add cl, '0'
mov [PCIWin + 105], cl
mov edx, PCIWin
mov ebx, 20 * 65536 + 25 ; x start, ystart of text
mov ecx, 0x224466 ; color of text
mov eax, 4
@@: movzx esi, byte[edx]
inc edx
mcall
add ebx, 10
add edx, esi
cmp byte[edx], -1
jne @b
; Quantity of devices...
movzx ecx, byte [total] ; number to draw
mcall 47, 0x00020000,,150 * 65536 + 65, 0x224466
mcall 12, 2 ; end of draw
ret
;------------------------------------------------------------------
;* Gets the PCI Version and Last Bus
Get_PCI_Info:
mov ebp, 1
mcall 57
mov word [PCI_Version], bx
mov byte [PCI_LastBus], cl
;----------------------------------------------------------
;* Get all devices on PCI Bus
cmp al, 0xff ; 0xFF means no pci bus found
jne Pci_Exists ;
ret ; if no bus then leave
Pci_Exists:
mov byte [V_Bus], 0 ; reset varibles
mov byte [V_Dev], 0 ;
mov edx, 20 * 65536 + 110 ; set start write position
Start_Enum:
mov ebp, 0x0a ; get a dword
xor edi, edi ; offset to device/vendor id
mov bh, byte [V_Bus] ; bus of pci device
mov bl, byte [V_Dev] ; device number/function
mcall 57 ; get ID's
cmp cx, 0 ; Vendor ID should not be 0 or 0xFFFF
je nextDev ; check next device if nothing exists here
cmp cx, 0xffff ;
je nextDev ;
mov word [PCI_Vendor], cx ; There is a device here, save the ID's
shr ecx, 16 ;
mov word [PCI_Device], cx ;
mov ebp, 8 ; Read config byte
mov bh, byte [V_Bus] ; Bus #
mov bl, byte [V_Dev] ; Device # on bus
mov edi, 0x08 ; Register to read (Get Revision)
mcall 57 ; Read it
mov byte [PCI_Rev], cl ; Save it
mov edi, 0x0b ; Register to read (Get class)
mcall 57 ; Read it
mov byte [PCI_Class], cl ; Save it
mov edi, 0x0a ; Register to read (Get Subclass)
mcall 57 ; Read it
mov byte [PCI_SubClass], cl; Save it
; from Mario79 august 2006
mov edi, 0x09 ; Register to read (Get Interface)
mcall 57 ; Read it
mov [PCI_Interface], cl ; Save it
;
; from Ghost april 2007
mov edi, 0x3c ; Register to read (Get IRQ)
mcall 57 ; Read it
mov [PCI_IRQ], cl ; Save it
;
inc byte [total] ; one more device found
call Print_New_Device ; print device info to screen
nextDev:
inc byte [V_Dev] ; next device on this bus
jnz Start_Enum ; jump until we reach zero
;(used to be JNO which caused bug!!! 30-4-2006, JMD)
mov byte [V_Dev], 0 ; reset device number
inc byte [V_Bus] ; next bus
mov al, byte [PCI_LastBus] ; get last bus
cmp byte [V_Bus], al ; was it last bus
jbe Start_Enum ; if not jump to keep searching
ret
;------------------------------------------------------------------
;* Print device info to screen
Print_New_Device:
xor esi, esi ; Color of text
movzx ecx,word [PCI_Vendor] ; Pointer to number to be written
mcall 47, 0x00040100 ; Write Vendor ID
and edx, 0xFFFF ;*****************************************
or edx, 54 * 65536 ; X start becomes 54
movzx ecx, word [PCI_Device] ; get Vendor ID
mcall ; Draw Vendor ID to Window
and edx, 0xFFFF ;*****************************************
or edx, 98 * 65536 ; X start becomes 98
movzx ecx, byte [V_Bus] ; get bus number
mcall ,0x00020100 ; draw bus number to screen
and edx, 0xFFFF ;*****************************************
or edx, 128 * 65536 ; X start becomes 128
movzx ecx, byte [V_Dev] ; get device number
shr ecx, 3 ; device number is bits 3-7
mcall ; Draw device Number To Window
and edx, 0xFFFF ;*****************************************
or edx, 155 * 65536 ; X start becomes 155
movzx ecx, byte [V_Dev] ; get Function number
and ecx, 7 ; function is first 3 bits
mcall ; Draw Function Number To Window
and edx, 0xFFFF ;*****************************************
or edx, 179 * 65536 ; X start becomes 179
movzx ecx, byte [PCI_Rev] ; get revision number
mcall ; Draw Revision to screen
and edx, 0xFFFF ;*****************************************
or edx, 215*65536 ; X start becomes 215
movzx ecx, byte [PCI_Class] ; get PCI_Class
mcall ; Draw Class to screen
and edx, 0xFFFF ;*****************************************
or edx, 250*65536 ; X start becomes 250
movzx ecx, byte [PCI_SubClass]; get sub class
mcall ; Draw Sub Class to screen
; from Mario79 august 2006
and edx, 0xFFFF ;*****************************************
or edx, 280 * 65536 ; X start becomes 280
movzx ecx, [PCI_Interface] ; get Interface
mcall
;
; from Ghost april 2007 ;*****************************************
movzx ecx, [PCI_IRQ] ; get Interface
cmp cl, 0x0f ; IRQ between 0..15
ja @f
and edx, 0xFFFF
or edx, 310 * 65536 ; X start becomes 310
mcall
@@:
;
;Write Names
movzx ebx, dx ; Set y position
or ebx, 340*65536 ; set Xposition to 340
;------------------------------------------------------------------
; Prints the Vendor's Name based on Vendor ID
;
; Modified on ??-04-2007 by Ghost for size
;------------------------------------------------------------------
mov edx, VendorsTab
mov cx, word[PCI_Vendor]
.fn: mov ax, [edx]
add edx, 6
test ax, ax
jz .find
cmp ax, cx
jne .fn
.find: mov edx, [edx - 4]
mcall 4,, 0x80000000 ; lets print the vendor Name
;------------------------------------------------------------------
; Get description based on Class/Subclass
;
; Modified on ??-04-2007 by Ghost for size
;------------------------------------------------------------------
mov eax, dword [PCI_Class]
and eax, 0xffffff
xor edx, edx
xor esi, esi
.fnc: inc esi
mov ecx, [Classes + esi * 8 - 8]
cmp cx, 0xffff
je .endfc
cmp cx, ax
jne .fnc
test ecx, 0xff000000
jz @f
mov edx, [Classes + esi * 8 - 4]
jmp .fnc
@@: cmp eax, ecx
jne .fnc
xor edx, edx
.endfc: test edx, edx
jnz @f
mov edx, [Classes + esi * 8 - 4]
@@:
and ebx, 0x0000FFFF ; clear X position
or ebx, 0x24E0000 ; set X position to 590 pixels
mcall 4,, 0x80000000,, 32 ; draw the text
movzx edx, bx ; get y coordinate
add edx, 0x0014000A ; add 10 to y coordinate and set x coordinate to 20
ret
include 'vendors.inc'
;------------------------------------------------------------------
; DATA AREA
DATA
Form: dw 800 ; window width (no more, special for 800x600)
dw 100 ; window x start
dw 420 ; window height
dw 100 ; window y start
if lang eq it
title db 'PCI Device Enumeration v 2.1n new PCI API test', 0
PCIWin mls \
'Ricordarsi di abilitare l accesso alla PCI per le applicazioni dal menu.',\
'',\
'Versione PCI = x.xx',\
'Ultimo Bus PCI = x',\
'Numerod di devices =',\
'',\
'VenID DevID Bus# Dev# Fnc Rev Class Subclass/ IRQ Compania Descrizione',\
' Interface',\
'----- ----- ---- ---- --- --- ----- --------- --- ------------------------------------------ ----------------'
else
title db 'PCI Device Enumeration v 2.1n new PCI API test', 0
PCIWin mls \
'Please remember to enable PCI Access to Applications in Setup Menu.',\
'',\
'PCI Version = x.xx',\
'Last PCI Bus = x',\
'Quantity of devices =',\
'',\
'VenID DevID Bus# Dev# Fnc Rev Class Subclass/ IRQ Company Description',\
' Interface',\
'----- ----- ---- ---- --- --- ----- --------- --- ------------------------------------------ ----------------'
end if
;------------------------------------------------------------------
; UNINITIALIZED DATA AREA
UDATA
total db ?
V_Bus db ?
V_Dev db ?
PCI_Version dw ?
PCI_LastBus db ?
PCI_Device dw ?
PCI_Vendor dw ?
PCI_Bus db ?
PCI_Dev db ?
PCI_Rev db ?
; don`t change order!!!
PCI_Class db ?
PCI_SubClass db ?
PCI_Interface db ?
PCI_IRQ db ?
Proc_Info process_information
MEOS_APP_END