; ssh.asm - SSH client for KolibriOS
;
; Copyright (C) 2015-2021 Jeffrey Amelynck
;
; This program is free software: you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation, either version 3 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program. If not, see <http://www.gnu.org/licenses/>.
format binary as ""
__DEBUG__ = 1
__DEBUG_LEVEL__ = 2 ; 1: Everything, including sensitive information, 2: Debugging, 3: Errors only
BUFFERSIZE = 64*1024 ; Must be at least 32K according rfc4253#section-6.1
PACKETSIZE = 32*1024 ; Must be at least 32K according rfc4253#section-6.1
MAX_BITS = 8192
DH_PRIVATE_KEY_SIZE = 256
MAX_INPUT_LENGTH = 255 ;;; WHAT WAS THIS AGAIN ?!
MAX_USERNAME_LENGTH = 256
MAX_PASSWORD_LENGTH = 256
MAX_HOSTNAME_LENGTH = 4096
MAX_PUBLIC_KEY_SIZE = 4096
use32
db 'MENUET01' ; signature
dd 1 ; header version
dd start ; entry point
dd i_end ; initialized size
dd mem+65536 ; required memory
dd mem+65536 ; stack pointer
dd params ; parameters
dd 0 ; path
include '../../macros.inc'
;include '../../struct.inc'
purge mov,add,sub
include '../../proc32.inc'
include '../../dll.inc'
include '../../debug-fdo.inc'
include '../../network.inc'
include '../../develop/libraries/libcrash/trunk/libcrash.inc'
; macros for network byte order
macro dd_n op {
dd 0 or (((op) and 0FF000000h) shr 24) or \
(((op) and 000FF0000h) shr 8) or \
(((op) and 00000FF00h) shl 8) or \
(((op) and 0000000FFh) shl 24)
}
macro dw_n op {
dw 0 or (((op) and 0FF00h) shr 8) or \
(((op) and 000FFh) shl 8)
}
macro str string {
local .start, .stop
dd_n (.stop-.start)
.start db string
.stop:
}
proc dump_hex _ptr, _length
if __DEBUG_LEVEL__ <= 1
pushad
mov esi, [_ptr]
mov ecx, [_length]
.next_dword:
lodsd
bswap eax
DEBUGF 1,'%x', eax
loop .next_dword
DEBUGF 1,'\n'
popad
end if
ret
endp
macro DEBUGM l, s, m {
if __DEBUG__
DEBUGF l, s
if l >=__DEBUG_LEVEL__
stdcall mpint_print, m
end if
end if
}
include 'mpint.inc'
include 'seed.inc'
include 'random.inc'
include 'aes256.inc'
include 'aes256-ctr.inc'
include 'aes256-cbc.inc'
include 'blowfish.inc'
include 'blowfish-ctr.inc'
include 'blowfish-cbc.inc'
include 'hmac_sha256.inc'
include 'hmac_sha1.inc'
include 'hmac_md5.inc'
include 'sshlib.inc'
include 'sshlib_mcodes.inc'
include 'sshlib_transport.inc'
include 'sshlib_connection.inc'
include 'sshlib_dh_gex.inc'
include 'sshlib_host.inc'
include 'sshlib_channel.inc'
include 'sshlib_userauth.inc'
include 'encodings.inc' ; Unfortunately, we dont have UTF-8 capable console yet :(
start:
mcall 68, 11 ; Init heap
DEBUGF 2, "SSH: Loading libraries\n"
stdcall dll.Load, @IMPORT
test eax, eax
jnz main.fail
DEBUGF 2, "SSH: Init PRNG\n"
call create_seed
call init_random
DEBUGF 2, "SSH: Init Console\n"
invoke con_start, 1
invoke con_init, 80, 25, 80, 250, title
cmp byte[params], 0
jne main.connect
main:
invoke con_cls
; Welcome user
invoke con_write_asciiz, str1a
.prompt:
invoke con_write_asciiz, str1b
; Reset window title
invoke con_set_title, title
; Write prompt
invoke con_write_asciiz, str2
; read string
mov esi, params
invoke con_gets, esi, MAX_HOSTNAME_LENGTH
; check for exit
test eax, eax
jz .done
cmp byte[esi], 10
jz .done
.connect:
stdcall sshlib_connect, ssh_con, params
cmp eax, 0
jg .prompt
jl .error
.login:
mcall 68, 12, (MAX_USERNAME_LENGTH + MAX_PASSWORD_LENGTH)
test eax, eax
jz .done ; ERR_NOMEM
mov esi, eax
lea edi, [eax + MAX_USERNAME_LENGTH]
; Get username
invoke con_write_asciiz, str12
invoke con_gets, esi, MAX_USERNAME_LENGTH
test eax, eax
;; jz .con_closed_must_clear
; Get password
invoke con_write_asciiz, str13a
invoke con_gets, edi, MAX_PASSWORD_LENGTH
test eax, eax
;; jz .con_closed_must_clear
invoke con_write_asciiz, str13b
; Authenticate
stdcall sshlib_userauth_password, ssh_con, esi, edi
; Clear and free username and password
.clear:
push eax
mov edx, edi
xor eax, eax
mov ecx, (MAX_USERNAME_LENGTH + MAX_PASSWORD_LENGTH)/4
rep stosd
mcall 68, 13, edx
pop eax
cmp eax, 0
jg .login ; Authentication failed
jl .error ; An error occured
; Open a channel
stdcall sshlib_chan_open, ssh_con
cmp eax, 0
jg .prompt ; Authentication failed
jl .error ; An error occured
; Start console input handler thread without deactivating the current window
; Get active window ID
mcall 18, 7
push eax
; Create thread
mcall 51, 1, con_in_thread, mem - 2048
; Activate window with given ID
pop ecx
mcall 18, 3
.loop:
invoke con_get_flags
test eax, 0x200 ; console window closed?
jnz .con_closed
stdcall sshlib_msg_handler, ssh_con, 0
cmp eax, 0
jle .check_err
cmp [ssh_con.rx_buffer.message_code], SSH_MSG_CHANNEL_DATA
jne .dump
mov eax, dword[ssh_con.rx_buffer.message_code+5]
bswap eax
DEBUGF 1, 'SSH: got %u bytes of data !\n', eax
lea esi, [ssh_con.rx_buffer.message_code+5+4]
lea edx, [esi+eax]
lea edi, [ssh_con.rx_buffer]
@@:
call get_byte_utf8
stosb
cmp esi, edx
jb @r
xor al, al
stosb
lea esi, [ssh_con.rx_buffer]
DEBUGF 3, 'SSH msg: %s\n', esi
invoke con_write_asciiz, esi
jmp .loop
.dump:
DEBUGF 3, "SSH: Unsupported message: "
lea esi, [ssh_con.rx_buffer.message_code]
mov ecx, eax
pusha
@@:
lodsb
DEBUGF 3, "%x ", eax:2
dec ecx
jnz @r
popa
DEBUGF 3, "\n"
jmp .loop
.check_err:
jz .err_conn_closed
cmp ebx, EWOULDBLOCK
je .loop
jmp .err_sock
.con_closed:
; Send close message on the active channel
stdcall sshlib_send_packet, ssh_con, ssh_msg_channel_close, ssh_msg_channel_close.length, 0
jmp .done
.error:
; TODO: proper cleanup after error
cmp eax, SSHLIB_ERR_NOMEM
je .done
cmp eax, SSHLIB_ERR_SOCKET
je .err_sock
cmp eax, SSHLIB_ERR_PROTOCOL
je .err_proto
cmp eax, SSHLIB_ERR_HOSTNAME
je .err_hostname
cmp eax, SSHLIB_ERR_HKEY_VERIFY_FAIL
je .err_hostkey_fail
cmp eax, SSHLIB_ERR_HKEY_SIGNATURE
je .err_hostkey_signature
cmp eax, SSHLIB_ERR_HKEY_PUBLIC_KEY
je .err_hostkey
jmp .done
.err_proto:
; lea eax, [ssh_con.rx_buffer]
; int3
invoke con_write_asciiz, str7
jmp .prompt
.err_sock:
invoke con_write_asciiz, str6
mov eax, str14
cmp ebx, ETIMEDOUT
je .err_sock_detail
mov eax, str15
cmp ebx, ECONNREFUSED
je .err_sock_detail
mov eax, str16
cmp ebx, ECONNRESET
je .err_sock_detail
mov eax, str17
.err_sock_detail:
invoke con_write_asciiz, eax
jmp .prompt
.err_hostname:
invoke con_write_asciiz, str10
jmp .prompt
.err_conn_closed:
invoke con_write_asciiz, str11
jmp .prompt
.err_hostkey:
invoke con_write_asciiz, str19
jmp .prompt
.err_hostkey_signature:
invoke con_write_asciiz, str20
jmp .prompt
.err_hostkey_fail:
invoke con_write_asciiz, str21
jmp .prompt
.done:
invoke con_exit, 1
.exit:
DEBUGF 3, "SSH: Exiting\n"
mcall close, [ssh_con.socketnum]
.fail:
mcall -1
proc sshlib_callback_connecting, con_ptr, connstring_sz
invoke con_write_asciiz, str3
mov eax, [con_ptr]
lea eax, [eax+sshlib_connection.hostname_sz]
invoke con_write_asciiz, eax
invoke con_write_asciiz, str8
invoke con_write_asciiz, [connstring_sz]
invoke con_write_asciiz, str9
ret
endp
proc sshlib_callback_hostkey_problem, con_ptr, problem_type, hostkey_sz
cmp [problem_type], SSHLIB_HOSTKEY_PROBLEM_UNKNOWN
je .unknown
cmp [problem_type], SSHLIB_HOSTKEY_PROBLEM_MISMATCH
je .mismatch
mov eax, -1
ret
.unknown:
invoke con_write_asciiz, str22
jmp .ask
.mismatch:
invoke con_write_asciiz, str23
; jmp .ask
.ask:
invoke con_write_asciiz, str24a
invoke con_write_asciiz, [hostkey_sz]
invoke con_write_asciiz, str24b
.getansw:
invoke con_getch2
or al, 0x20 ; convert to lowercase
cmp al, 'a'
je .accept
cmp al, 'c'
je .once
cmp al, 'x'
je .refuse
jmp .getansw
.accept:
mov eax, SSHLIB_HOSTKEY_ACCEPT
ret
.once:
mov eax, SSHLIB_HOSTKEY_ONCE
ret
.refuse:
mov eax, SSHLIB_HOSTKEY_REFUSE
ret
endp
align 16
con_in_thread:
.loop:
; TODO: check if channel is still open somehow
invoke con_get_input, ssh_msg_channel_data.data, MAX_INPUT_LENGTH
test eax, eax
jz .no_input
lea ecx, [eax + ssh_msg_channel_data.data - ssh_msg_channel_data]
bswap eax
mov [ssh_msg_channel_data.len], eax
stdcall sshlib_send_packet, ssh_con, ssh_msg_channel_data, ecx, 0
cmp eax, 0
jle .exit
.no_input:
invoke con_get_flags
test eax, 0x200 ; con window closed?
jz .loop
.exit:
mcall -1
; data
title db 'Secure Shell',0
str1a db 'SSHv2 client for KolibriOS',10,0
str1b db 10,'Please enter URL of SSH server (hostname:port)',10,0
str2 db '> ',0
str3 db 'Connecting to ',0
str4 db 10,0
str6 db 10, 27, '[2J',27,'[mA network error has occured.',10,0
str7 db 10, 27, '[2J',27,'[mAn SSH protocol error has occured.',10,0
str8 db ' (',0
str9 db ')',10,0
str10 db 'Host does not exist.',10,10,0
str11 db 10, 27, '[2J',27,'[mThe remote host closed the connection.',10,0
str12 db 'Login as: ',0
str13a db 'Password: ', 27, '[?25l', 27, '[30;40m', 0
str13b db 10, 27, '[?25h', 27, '[0m', 27, '[2J', 0
str14 db 'The connection timed out',10,0
str15 db 'The connection was refused',10,0
str16 db 'The connection was reset',10,0
str17 db 'No details available',10,0
;str18 db 'User authentication failed',10,0;;;;
str19 db "The remote host's public key is invalid.", 10, 0
str20 db "The remote host's signature is invalid.", 10, 0
str21 db "The remote host failed to verify it's own public key.", 10, 0
str22 db "The host key for the server was not found in the cache.", 10
db "There is no guarantee to the servers identity !",10, 0
str23 db "The host key provided by the host does not match the cached one.", 10
db "This may indicate that the remote server has been compromised!", 10, 0
str24a db 10, "The remote host key is: ", 10, 0
str24b db 10, 10, "If you trust this host, press A to accept and store the (new) key.", 10
db "Press C to connect to the host but don't store the (new) key.", 10
db "Press X to abort.", 10, 0
ssh_ident_ha:
dd_n (ssh_msg_ident.length-2)
ssh_msg_ident:
db "SSH-2.0-KolibriOS_SSH_0.07",13,10
.length = $ - ssh_msg_ident
ssh_msg_kex:
db SSH_MSG_KEXINIT
.cookie:
rd 4
.kex_algorithms:
str "diffie-hellman-group-exchange-sha256" ; diffie-hellman-group-exchange-sha1
.server_host_key_algorithms:
str "rsa-sha2-256,ssh-rsa" ;,ssh-dss
.encryption_algorithms_client_to_server:
str "aes256-ctr" ;,aes256-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,blowfish-ctr,blowfish-cbc,3des-ctr,3des-cbc,arcfour256,arcfour128"
.encryption_algorithms_server_to_client:
str "aes256-ctr" ;,aes256-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes192-ctr,aes192-cbc,aes128-ctr,aes128-cbc,blowfish-ctr,blowfish-cbc,3des-ctr,3des-cbc,arcfour256,arcfour128"
.mac_algorithms_client_to_server:
str "hmac-sha2-256" ;,hmac-sha1,hmac-sha1-96,hmac-md5"
.mac_algorithms_server_to_client:
str "hmac-sha2-256" ;,hmac-sha1,hmac-sha1-96,hmac-md5"
.compression_algorithms_client_to_server:
str "none" ;,zlib"
.compression_algorithms_server_to_client:
str "none" ;,zlib"
.languages_client_to_server:
str ""
.languages_server_to_client:
str ""
.first_kex_packet_follows:
db 0
.reserved:
dd_n 0
.length = $ - ssh_msg_kex
ssh_msg_gex_req:
db SSH_MSG_KEX_DH_GEX_REQUEST
dd_n 4096/4 ; DH GEX min
dd_n 4096/2 ; DH GEX number of bits
dd_n 4096 ; DH GEX Max
.length = $ - ssh_msg_gex_req
ssh_msg_new_keys:
db SSH_MSG_NEWKEYS
.length = $ - ssh_msg_new_keys
ssh_msg_request_service:
db SSH_MSG_SERVICE_REQUEST
str "ssh-userauth" ; Service name
.length = $ - ssh_msg_request_service
ssh_msg_channel_open:
db SSH_MSG_CHANNEL_OPEN
str "session"
dd_n 0 ; Sender channel
dd_n BUFFERSIZE ; Initial window size
dd_n PACKETSIZE ; maximum packet size
.length = $ - ssh_msg_channel_open
ssh_msg_channel_close:
db SSH_MSG_CHANNEL_CLOSE
dd_n 0 ; Sender channel
.length = $ - ssh_msg_channel_close
ssh_msg_channel_request:
db SSH_MSG_CHANNEL_REQUEST
dd_n 0 ; Recipient channel
str "pty-req"
db 1 ; Bool: want reply
str "xterm"
dd_n 80 ; terminal width (rows)
dd_n 25 ; terminal height (rows)
dd_n 80*8 ; terminal width (pixels)
dd_n 25*16 ; terminal height (pixels)
dd_n 0 ; list of supported opcodes
.length = $ - ssh_msg_channel_request
ssh_msg_shell_request:
db SSH_MSG_CHANNEL_REQUEST
dd_n 0 ; Recipient channel
str "shell"
db 1 ; Bool: want reply
.length = $ - ssh_msg_shell_request
ssh_msg_channel_data:
db SSH_MSG_CHANNEL_DATA
dd_n 0 ; Sender channel
.len dd ?
.data rb MAX_INPUT_LENGTH + 1
ssh_msg_channel_window_adjust:
db SSH_MSG_CHANNEL_WINDOW_ADJUST
dd_n 0 ; Sender channel
.wnd dd ?
.length = $ - ssh_msg_channel_window_adjust
include_debug_strings
align 4
@IMPORT:
library network, 'network.obj', \
console, 'console.obj', \
libcrash, 'libcrash.obj', \
libini, 'libini.obj'
import network, \
getaddrinfo, 'getaddrinfo', \
freeaddrinfo, 'freeaddrinfo', \
inet_ntoa, 'inet_ntoa'
import console, \
con_start, 'START', \
con_init, 'con_init', \
con_write_asciiz, 'con_write_asciiz', \
con_exit, 'con_exit', \
con_gets, 'con_gets', \
con_cls, 'con_cls', \
con_getch2, 'con_getch2', \
con_get_flags, 'con_get_flags', \
con_set_title, 'con_set_title', \
con_get_input, 'con_get_input'
import libcrash, \
sha256_init, 'sha256_init', \
sha256_update, 'sha256_update', \
sha256_final, 'sha256_final',\
sha1_init, 'sha1_init', \
sha1_update, 'sha1_update', \
sha1_final, 'sha1_final', \
md5_init, 'md5_init', \
md5_update, 'md5_update', \
md5_final, 'md5_final'
import libini, \
ini_get_str, 'ini_get_str', \
ini_set_str, 'ini_set_str'
IncludeIGlobals
i_end:
IncludeUGlobals
params rb MAX_HOSTNAME_LENGTH
ssh_con sshlib_connection
ssh_chan sshlib_channel
mem: