;*****************************************************************************
; File Speed - for Kolibri OS
; Copyright (c) 2014, Marat Zakiyanov aka Mario79, aka Mario
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without
; modification, are permitted provided that the following conditions are met:
; * Redistributions of source code must retain the above copyright
; notice, this list of conditions and the following disclaimer.
; * Redistributions in binary form must reproduce the above copyright
; notice, this list of conditions and the following disclaimer in the
; documentation and/or other materials provided with the distribution.
; * Neither the name of the <organization> nor the
; names of its contributors may be used to endorse or promote products
; derived from this software without specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY Marat Zakiyanov ''AS IS'' AND ANY
; EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
; DISCLAIMED. IN NO EVENT SHALL <copyright holder> BE LIABLE FOR ANY
; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;*****************************************************************************
;-----------------------------------------------------------------------------
use32
org 0x0
db 'MENUET01'
dd 0x01
dd START
dd IM_END
dd I_END
dd STACK_TOP
dd 0x0
dd cur_dir_path
;-----------------------------------------------------------------------------
include 'lang.inc'
include '../../macros.inc'
define __DEBUG__ 1
define __DEBUG_LEVEL__ 1
include '../../debug-fdo.inc'
include '../../develop/libraries/box_lib/trunk/box_lib.mac'
include '../../develop/libraries/box_lib/load_lib.mac'
@use_library
;-----------------------------------------------------------------------------
struct RESULT_SLOT
text dd ?
read_speed dd ?
write_speed dd ?
chunk_size dd ?
ends
;-----------------------------------------------------------------------------
START:
DEBUGF 1,'FSPEED: start of programm\n'
;-----------------------------------------------------------------------------
mcall 68,11
test eax,eax
jz exit
;-----------------------------------------------------------------------------
load_libraries l_libs_start,end_l_libs
;if return code =-1 then exit, else nornary work
inc eax
test eax,eax
jz exit
;-----------------------------------------------------------------------------
;OpenDialog initialisation
push dword OpenDialog_data
call [OpenDialog_Init]
push check1
call [init_checkbox]
mcall 40,0x27
;-----------------------------------------------------------------------------
red:
call draw_window
;-----------------------------------------------------------------------------
still:
mcall 10
cmp eax,1
je red
cmp eax,2
je key
cmp eax,3
je button
push dword check1
call [check_box_mouse]
jmp still
;-----------------------------------------------------------------------------
key:
mcall 2
jmp still
;-----------------------------------------------------------------------------
button:
mcall 17
cmp ah,2
je select_file
cmp ah,3
je testing
cmp ah,1
jne still
;--------------------------------------
exit:
mcall -1
;-----------------------------------------------------------------------------
select_file:
; invoke OpenDialog
mov [OpenDialog_data.type],dword 0
push dword OpenDialog_data
call [OpenDialog_Start]
cmp [OpenDialog_data.status],1
jne still
; prepare for PathShow
push dword PathShow_data
call [PathShow_prepare]
call draw_PathShow
jmp still
;-----------------------------------------------------------------------------
draw_PathShow:
mcall 13,<5,400-20>,<5,15>,0xffffff
; draw for PathShow
push dword PathShow_data
call [PathShow_draw]
ret
;-----------------------------------------------------------------------------
draw_window:
mcall 48,3,app_colours,4*10 ; get current colors
mcall 12,1
xor esi,esi
xor ebp,ebp
mov edx,[w_work] ; color of work area RRGGBB,8->color
or edx,0x34000000
mcall 0,<100,400>,<100,300>,,,title
call draw_PathShow
mov eax,[w_work_text]
or eax,0x80000000
mov [check1.text_color],eax
push dword check1
call [check_box_draw]
mcall 8,<5,80>,<25,15>,2,[w_work_button]
mcall ,<400-65,50>,,3
mov ecx,[w_work_button_text]
or ecx,0x80000000
mcall 4,<5+10,25+4>,,s_text
mcall ,<400-65+10,25+4>,,r_text
mov ecx,[w_work_text]
or ecx,0x80000000
mcall ,<10,47>,,check_box_warning_text
mcall ,<10,65>,,result_table_text
mov edx,ecx
and edx,0xffffff
mcall 38,<5,400-15>,<59,59>
; draw result table
mov ebx,10 shl 16+77
mov ebp,result_table
mov ecx,18
;--------------------------------------
@@:
push ecx
mov ecx,[w_work_text]
or ecx,0x80000000
mcall 4,,,[ebp+RESULT_SLOT.text]
push ebx
mov edx,ebx
add edx,(11*6) shl 16
mov ebx,0x800a0000
mcall 47,,[ebp+RESULT_SLOT.read_speed],,[w_work_text]
add edx,(16*6) shl 16
mcall ,,[ebp+RESULT_SLOT.write_speed]
pop ebx
add ebx,6+5
add ebp,sizeof.RESULT_SLOT
pop ecx
dec ecx
jnz @b
mcall 12,2
ret
;-----------------------------------------------------------------------------;-----------------------------------------------------------------------------
testing:
mcall 70,fileinfo
test eax,eax
jz @f
DEBUGF 1,'FSPEED: file not found %s\n',fname
jmp still
;--------------------------------------
@@:
DEBUGF 1,'FSPEED: target file %s\n',fname
mov ebp,result_table
mov ecx,18
;--------------------------------------
@@:
push ecx
call read_chunk
pusha
call draw_window
popa
call write_chunk
pusha
call draw_window
popa
pop ecx
add ebp,sizeof.RESULT_SLOT
dec ecx
jnz @b
jmp still
;-----------------------------------------------------------------------------
read_chunk:
mov eax,[file_info+32] ; file size
cmp [ebp+RESULT_SLOT.chunk_size],eax
jb @f
xor eax,eax ; small file size for current chunk size
mov [ebp+RESULT_SLOT.read_speed],eax
ret
;--------------------------------------
@@:
mcall 68,12,[ebp+RESULT_SLOT.chunk_size]
mov [fileread.return],eax
xor eax,eax
mov [fileread.offset],eax ; zero current offset
mcall 26,9 ; get start time
add eax,1600 ; 16 sec for iterations
mov esi,eax
mov ecx,1
mov eax,[ebp+RESULT_SLOT.chunk_size]
mov [fileread.size],eax
;--------------------------------------
.loop:
mcall 70,fileread
mcall 26,9 ; check current time
cmp esi,eax
jbe .end
; correct offset
mov edx,[ebp+RESULT_SLOT.chunk_size]
add [fileread.offset],edx ; current offset
; check offset and file size
mov edx,[file_info+32] ; file size
sub edx,[ebp+RESULT_SLOT.chunk_size]
cmp [fileread.offset],edx
jbe @f
xor edx,edx
mov [fileread.offset],edx ; zero current offset
;--------------------------------------
@@:
inc ecx
jmp .loop
;--------------------------------------
.end:
mov eax,[ebp+RESULT_SLOT.chunk_size]
xor edx,edx
mul ecx
shr eax,10+4 ;div 1024 ; div 16
shl edx,18
add eax,edx
mov [ebp+RESULT_SLOT.read_speed],eax ; speed KB/s
DEBUGF 1,'FSPEED: read chunk size: %s iterations: %d speed: %d KB/s\n',\
[ebp+RESULT_SLOT.text],ecx,eax
mcall 68,13,[fileread.return]
ret
;-----------------------------------------------------------------------------
write_chunk:
test [check1.flags],dword 10b
jz .exit
mov eax,[file_info+32] ; file size
cmp [ebp+RESULT_SLOT.chunk_size],eax
jb @f
;--------------------------------------
.exit:
xor eax,eax ; small file size for current chunk size
mov [ebp+RESULT_SLOT.write_speed],eax
ret
;--------------------------------------
@@:
mcall 68,12,[ebp+RESULT_SLOT.chunk_size]
mov [filewrite.data],eax
xor eax,eax
mov [filewrite.offset],eax ; zero current offset
mcall 26,9 ; get start time
add eax,1600 ; 16 sec for iterations
mov esi,eax
mov ecx,1
mov eax,[ebp+RESULT_SLOT.chunk_size]
mov [filewrite.size],eax
;--------------------------------------
.loop:
mcall 70,filewrite
mcall 26,9 ; check current time
cmp esi,eax
jbe .end
; correct offset
mov edx,[ebp+RESULT_SLOT.chunk_size]
add [filewrite.offset],edx ; current offset
; check offset and file size
mov edx,[file_info+32] ; file size
sub edx,[ebp+RESULT_SLOT.chunk_size]
cmp [filewrite.offset],edx
jbe @f
xor edx,edx
mov [filewrite.offset],edx ; zero current offset
;--------------------------------------
@@:
inc ecx
jmp .loop
;--------------------------------------
.end:
mov eax,[ebp+RESULT_SLOT.chunk_size]
xor edx,edx
mul ecx
shr eax,10+4 ;div 1024 ; div 16
shl edx,18
add eax,edx
mov [ebp+RESULT_SLOT.write_speed],eax ; speed KB/s
DEBUGF 1,'FSPEED: write chunk size: %s iterations: %d speed: %d KB/s\n',\
[ebp+RESULT_SLOT.text],ecx,eax
mcall 68,13,[filewrite.data]
ret
;-----------------------------------------------------------------------------
include 'idata.inc'
;-----------------------------------------------------------------------------
IM_END:
;-----------------------------------------------------------------------------
include 'udata.inc'
;-----------------------------------------------------------------------------
I_END:
;-----------------------------------------------------------------------------