Subversion Repositories Kolibri OS

Rev

Rev 2118 | Rev 2231 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  2. ;;                                                              ;;
  3. ;; Copyright (C) KolibriOS team 2004-2008. All rights reserved. ;;
  4. ;; Distributed under terms of the GNU General Public License    ;;
  5. ;;                                                              ;;
  6. ;;                                                              ;;
  7. ;;  MenuetOS process management, protected ring3                ;;
  8. ;;                                                              ;;
  9. ;;  Distributed under GPL. See file COPYING for details.        ;;
  10. ;;  Copyright 2003 Ville Turjanmaa                              ;;
  11. ;;                                                              ;;
  12. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  13.  
  14. $Revision: 2167 $
  15.  
  16.  
  17. align 4 ;3A08
  18. build_interrupt_table:
  19.         mov     edi, idts
  20.         mov     esi, sys_int
  21.         mov     ecx, 0x40
  22.         mov     eax, (10001110b shl 24) + os_code
  23.   @@:   movsw   ;low word of code-entry
  24.         stosd   ;interrupt gate type : os_code selector
  25.         movsw   ;high word of code-entry
  26.         loop    @b
  27.         movsd   ;copy low  dword of trap gate for int 0x40
  28.         movsd   ;copy high dword of trap gate for int 0x40
  29.         lidt    [esi]
  30.         ret
  31.  
  32. iglobal
  33.   align 4
  34.   sys_int:
  35.     ;exception handlers addresses (for interrupt gate construction)
  36.         dd      e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
  37.         dd      e8,e9,e10,e11,e12,e13,page_fault_exc,e15
  38.         dd      e16, e17,e18, e19
  39.         times   12 dd unknown_interrupt ;int_20..int_31
  40.  
  41.     ;interrupt handlers addresses (for interrupt gate construction)
  42.         ; 0x20 .. 0x2F - IRQ handlers
  43.         dd      irq0, irq_serv.irq_1, irq_serv.irq_2
  44.         dd      irq_serv.irq_3, irq_serv.irq_4
  45.         dd      irq_serv.irq_5,  irq_serv.irq_6,  irq_serv.irq_7
  46.         dd      irq_serv.irq_8,  irq_serv.irq_9,  irq_serv.irq_10
  47.         dd      irq_serv.irq_11, irq_serv.irq_12, irqD, irq_serv.irq_14, irq_serv.irq_15
  48.  
  49.  
  50.     times 32 - IRQ_RESERVED dd unknown_interrupt
  51.     ;int_0x40 gate trap (for directly copied)
  52.         dw      i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
  53.  
  54.   idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
  55.         dw      2*($-sys_int-4)-1
  56.         dd      idts ;0x8000B100
  57.         dw      0    ;ïðîñòî âûðàâíèâàíèå
  58.  
  59.   msg_fault_sel dd  msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
  60.                 dd  msg_exc_c,msg_exc_d,msg_exc_e
  61.  
  62.   msg_exc_8     db "Double fault", 0
  63.   msg_exc_u     db "Undefined Exception", 0
  64.   msg_exc_a     db "Invalid TSS", 0
  65.   msg_exc_b     db "Segment not present", 0
  66.   msg_exc_c     db "Stack fault", 0
  67.   msg_exc_d     db "General protection fault", 0
  68.   msg_exc_e     db "Page fault", 0
  69.  
  70.   msg_sel_ker   db "kernel", 0
  71.   msg_sel_app   db "application", 0
  72.  
  73. endg
  74.  
  75. macro save_ring3_context {
  76.         pushad
  77. }
  78. macro restore_ring3_context {
  79.         popad
  80. }
  81. macro exc_wo_code [num] {
  82.   e#num :
  83.         save_ring3_context
  84.         mov     bl, num
  85.         jmp     exc_c
  86. } exc_wo_code   0,1,2,3,4,5,6,15,16,19
  87.  
  88. macro exc_w_code [num] {
  89.   e#num :
  90.         add     esp, 4
  91.         save_ring3_context
  92.         mov     bl, num
  93.         jmp     exc_c
  94. } exc_w_code    8,9,10,11,12,13,17,18
  95.  
  96.  
  97. uglobal
  98.   pf_err_code   dd ?
  99. endg
  100.  
  101. page_fault_exc:                 ; äóðàêîóñòî÷èâîñòü: ñåëåêòîðû èñïîð÷åíû...
  102.         pop     [ss:pf_err_code]; äåéñòâèòåëüíî äî ñëåäóþùåãî #PF
  103.         save_ring3_context
  104.         mov     bl,14
  105.  
  106. exc_c:                          ; èñêëþ÷åíèÿ (âñå, êðîìå 7-ãî - #NM)
  107. ; Ôðýéì ñòåêà ïðè èñêëþ÷åíèè/ïðåðûâàíèè èç 3-ãî êîëüöà + pushad (ò.å., èìåííî çäåñü)
  108.   reg_ss        equ esp+0x30
  109.   reg_esp3      equ esp+0x2C
  110.   reg_eflags    equ esp+0x28
  111.   reg_cs3       equ esp+0x24
  112.   reg_eip       equ esp+0x20
  113.  ; ýòî ôðýéì îò pushad
  114.   reg_eax       equ esp+0x1C
  115.   reg_ecx       equ esp+0x18
  116.   reg_edx       equ esp+0x14
  117.   reg_ebx       equ esp+0x10
  118.   reg_esp0      equ esp+0x0C
  119.   reg_ebp       equ esp+0x08
  120.   reg_esi       equ esp+0x04
  121.   reg_edi       equ esp+0x00
  122.  
  123.             mov ax, app_data        ;èñêëþ÷åíèå
  124.             mov ds, ax                  ;çàãðóçèì ïðàâèëüíûå çíà÷åíèÿ
  125.             mov es, ax                  ;â ðåãèñòðû
  126.         cld                     ; è ïðèâîäèì DF ê ñòàíäàðòó
  127.         movzx   ebx,bl
  128. ; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
  129.         test    byte[reg_eflags+2],2
  130.         jnz     v86_exc_c
  131.         cmp     bl,14           ; #PF
  132.         jne     @f
  133.         call    page_fault_handler ; SEE: core/memory.inc
  134.   @@:   mov     esi, [current_slot]
  135.         btr     [esi+APPDATA.except_mask], ebx
  136.         jnc     @f
  137.         mov     eax,[esi+APPDATA.exc_handler]
  138.         test    eax, eax
  139.         jnz     IRetToUserHook
  140.   @@:   cli
  141.         mov     eax, [esi+APPDATA.debugger_slot]
  142.         test    eax, eax
  143.         jnz     .debug
  144.         sti
  145. ; not debuggee => say error and terminate
  146.         call    show_error_parameters ;; only ONE using, inline ???
  147.        ;mov     edx, [TASK_BASE]
  148.         mov     [edx + TASKDATA.state], byte 4 ; terminate
  149.         jmp     change_task     ; stack - here it does not matter at all, SEE: core/shed.inc
  150. .debug:
  151. ; we are debugged process, notify debugger and suspend ourself
  152. ; eax=debugger PID
  153.         mov     ecx,1           ; debug_message code=other_exception
  154.         cmp     bl,1            ; #DB
  155.         jne     .notify         ; notify debugger and suspend ourself
  156.         mov     ebx, dr6        ; debug_message data=DR6_image
  157.         xor     edx, edx
  158.         mov     dr6, edx
  159.         mov     edx, dr7
  160.         mov     cl, not 8
  161.   .l1:  shl     dl,2
  162.         jc      @f
  163.         and     bl, cl
  164.   @@:   sar     cl,1
  165.         jc      .l1
  166.         mov     cl, 3           ; debug_message code=debug_exception
  167. .notify:
  168.         push    ebx             ; debug_message data
  169.         mov     ebx, [TASK_BASE]
  170.         push    [ebx+TASKDATA.pid] ; PID
  171.         push    ecx             ; debug_message code ((here: ecx==1/3))
  172.         mov     cl, 12          ; debug_message size
  173.         call    debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
  174.         add     esp,12
  175.         mov     edx, [TASK_BASE]
  176.         mov     byte [edx+TASKDATA.state], 1 ; suspended
  177.         call    change_task     ; SEE: core/shed.inc
  178.         restore_ring3_context
  179.         iretd
  180.  
  181. IRetToUserHook:
  182.         xchg    eax, [reg_eip]
  183.         sub     dword[reg_esp3], 8
  184.         mov     edi, [reg_esp3]
  185.         stosd
  186.         mov     [edi], ebx
  187.         restore_ring3_context
  188. ; simply return control to interrupted process
  189. unknown_interrupt:
  190.         iretd
  191.  
  192. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  193. ; bl - error vector
  194. show_error_parameters:
  195.         cmp     bl, 0x06
  196.         jnz     .no_ud
  197.         push    ebx
  198.         mov     ebx, ud_user_message
  199.         mov     ebp, notifyapp
  200.         call    fs_execute_from_sysdir_param
  201.         pop     ebx
  202. .no_ud:
  203.         mov     edx,[TASK_BASE] ;not scratched below
  204.         DEBUGF  1, "K : Process - forced terminate PID: %x\n", [edx+TASKDATA.pid]
  205.         cmp     bl, 0x08
  206.         jb      .l0
  207.         cmp     bl, 0x0e
  208.         jbe     .l1
  209.   .l0:  mov     bl, 0x09
  210.   .l1:  mov     eax,[msg_fault_sel+ebx*4 - 0x08*4]
  211.         DEBUGF  1, "K : %s\n", eax
  212.         mov     eax, [reg_cs3+4]
  213.         mov     edi, msg_sel_app
  214.         mov     ebx, [reg_esp3+4]
  215.         cmp     eax, app_code
  216.         je      @f
  217.         mov     edi, msg_sel_ker
  218.         mov     ebx, [reg_esp0+4]
  219.     @@: DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
  220.         DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
  221.         DEBUGF  1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
  222.         DEBUGF  1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
  223.         ret
  224. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  225.  
  226.   restore  reg_ss
  227.   restore  reg_esp3
  228.   restore  reg_eflags
  229.   restore  reg_cs
  230.   restore  reg_eip
  231.   restore  reg_eax
  232.   restore  reg_ecx
  233.   restore  reg_edx
  234.   restore  reg_ebx
  235.   restore  reg_esp0
  236.   restore  reg_ebp
  237.   restore  reg_esi
  238.   restore  reg_edi
  239.  
  240.  
  241. align 4
  242. set_application_table_status:
  243.         push eax
  244.  
  245.         mov  eax,[CURRENT_TASK]
  246.         shl  eax, 5
  247.         add  eax,CURRENT_TASK+TASKDATA.pid
  248.         mov  eax,[eax]
  249.  
  250.         mov  [application_table_status],eax
  251.  
  252.         pop  eax
  253.  
  254.         ret
  255.  
  256. align 4
  257. clear_application_table_status:
  258.         push eax
  259.  
  260.         mov  eax,[CURRENT_TASK]
  261.         shl  eax, 5
  262.         add  eax,CURRENT_TASK+TASKDATA.pid
  263.         mov  eax,[eax]
  264.  
  265.         cmp  eax,[application_table_status]
  266.         jne  apptsl1
  267.         xor  eax,eax
  268.         mov  [application_table_status],eax
  269.       apptsl1:
  270.  
  271.         pop  eax
  272.  
  273.         ret
  274.  
  275. ;  * eax = 64 - íîìåð ôóíêöèè
  276. ;  * ebx = 1 - åäèíñòâåííàÿ ïîäôóíêöèÿ
  277. ;  * ecx = íîâûé ðàçìåð ïàìÿòè
  278. ;Âîçâðàùàåìîå çíà÷åíèå:
  279. ;  * eax = 0 - óñïåøíî
  280. ;  * eax = 1 - íåäîñòàòî÷íî ïàìÿòè
  281.  
  282. align 4
  283. sys_resize_app_memory:
  284.         ; ebx = 1 - resize
  285.         ; ecx = new amount of memory
  286.  
  287. ;        cmp    eax,1
  288.         dec     ebx
  289.         jnz    .no_application_mem_resize
  290.         stdcall new_mem_resize, ecx
  291.         mov [esp+32], eax
  292. .no_application_mem_resize:
  293.         ret
  294.  
  295. iglobal
  296. ;  process_terminating  db 'K : Process - terminating',13,10,0
  297. ;  process_terminated   db 'K : Process - done',13,10,0
  298.   msg_obj_destroy       db 'K : destroy app object',13,10,0
  299. endg
  300.  
  301. ; param
  302. ;  esi= slot
  303.  
  304. align 4
  305. terminate: ; terminate application
  306.  
  307.            .slot equ esp   ;locals
  308.  
  309.            push   esi      ;save .slot
  310.  
  311.            shl esi, 8
  312.            cmp [SLOT_BASE+esi+APPDATA.dir_table], 0
  313.            jne @F
  314.            pop    esi
  315.            shl    esi, 5
  316.            mov    [CURRENT_TASK+esi+TASKDATA.state], 9
  317.            ret
  318. @@:
  319.            ;mov    esi,process_terminating
  320.            ;call   sys_msg_board_str
  321. @@:
  322.            cli
  323.            cmp   [application_table_status],0
  324.            je    term9
  325.            sti
  326.            call  change_task
  327.            jmp   @b
  328. term9:
  329.            call  set_application_table_status
  330.  
  331. ; if the process is in V86 mode...
  332.         mov     eax, [.slot]
  333.         shl     eax, 8
  334.         mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
  335.         add     esi, RING0_STACK_SIZE
  336.         cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
  337.         jz      .nov86
  338. ; ...it has page directory for V86 mode
  339.         mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
  340.         mov     ecx, [esi+4]
  341.         mov     [eax+SLOT_BASE+APPDATA.dir_table], ecx
  342. ; ...and I/O permission map for V86 mode
  343.         mov     ecx, [esi+12]
  344.         mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
  345.         mov     ecx, [esi+8]
  346.         mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
  347. .nov86:
  348.  
  349.            mov esi, [.slot]
  350.            shl esi,8
  351.            add esi, SLOT_BASE+APP_OBJ_OFFSET
  352. @@:
  353.            mov eax, [esi+APPOBJ.fd]
  354.            test eax, eax
  355.            jz @F
  356.  
  357.            cmp eax, esi
  358.            je @F
  359.  
  360.            push esi
  361.            call [eax+APPOBJ.destroy]
  362.            DEBUGF 1,"%s",msg_obj_destroy
  363.            pop esi
  364.            jmp @B
  365. @@:
  366.  
  367.            mov eax, [.slot]
  368.            shl eax, 8
  369.            stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]
  370.  
  371.            mov esi, [.slot]
  372.            cmp [fpu_owner],esi   ; if user fpu last -> fpu user = 1
  373.            jne @F
  374.  
  375.            mov [fpu_owner],1
  376.            mov eax, [256+SLOT_BASE+APPDATA.fpu_state]
  377.            clts
  378.            bt [cpu_caps], CAPS_SSE
  379.            jnc .no_SSE
  380.            fxrstor [eax]
  381.            jmp @F
  382. .no_SSE:
  383.            fnclex
  384.            frstor [eax]
  385. @@:
  386.  
  387.     mov   [KEY_COUNT],byte 0           ; empty keyboard buffer
  388.     mov   [BTN_COUNT],byte 0           ; empty button buffer
  389.  
  390.  
  391. ; remove defined hotkeys
  392.         mov     eax, hotkey_list
  393. .loop:
  394.         cmp     [eax+8], esi
  395.         jnz     .cont
  396.         mov     ecx, [eax]
  397.         jecxz   @f
  398.         push    dword [eax+12]
  399.         pop     dword [ecx+12]
  400. @@:
  401.         mov     ecx, [eax+12]
  402.         push    dword [eax]
  403.         pop     dword [ecx]
  404.         xor     ecx, ecx
  405.         mov     [eax], ecx
  406.         mov     [eax+4], ecx
  407.         mov     [eax+8], ecx
  408.         mov     [eax+12], ecx
  409. .cont:
  410.         add     eax, 16
  411.         cmp     eax, hotkey_list+256*16
  412.         jb      .loop
  413. ; remove hotkeys in buffer
  414.         mov     eax, hotkey_buffer
  415. .loop2:
  416.         cmp     [eax], esi
  417.         jnz     .cont2
  418.         and     dword [eax+4], 0
  419.         and     dword [eax], 0
  420. .cont2:
  421.         add     eax, 8
  422.         cmp     eax, hotkey_buffer+120*8
  423.         jb      .loop2
  424.  
  425.     mov   ecx,esi                 ; remove buttons
  426.   bnewba2:
  427.     mov   edi,[BTN_ADDR]
  428.     mov   eax,edi
  429.     cld
  430.     movzx ebx,word [edi]
  431.     inc   bx
  432.   bnewba:
  433.     dec   bx
  434.     jz    bnmba
  435.     add   eax,0x10
  436.     cmp   cx,[eax]
  437.     jnz   bnewba
  438.     pusha
  439.     mov   ecx,ebx
  440.     inc   ecx
  441.     shl   ecx,4
  442.     mov   ebx,eax
  443.     add   eax,0x10
  444.     call  memmove
  445.     dec   dword [edi]
  446.     popa
  447.     jmp   bnewba2
  448.   bnmba:
  449.  
  450.     pusha     ; save window coordinates for window restoring
  451.     cld
  452.     shl   esi,5
  453.     add   esi,window_data
  454.     mov   eax,[esi+WDATA.box.left]
  455.     mov   [draw_limits.left],eax
  456.     add   eax,[esi+WDATA.box.width]
  457.     mov   [draw_limits.right],eax
  458.     mov   eax,[esi+WDATA.box.top]
  459.     mov   [draw_limits.top],eax
  460.     add   eax,[esi+WDATA.box.height]
  461.     mov   [draw_limits.bottom],eax
  462.  
  463.     xor   eax, eax
  464.     mov   [esi+WDATA.box.left],eax
  465.     mov   [esi+WDATA.box.width],eax
  466.     mov   [esi+WDATA.box.top],eax
  467.     mov   [esi+WDATA.box.height],eax
  468.     mov   [esi+WDATA.cl_workarea],eax
  469.     mov   [esi+WDATA.cl_titlebar],eax
  470.     mov   [esi+WDATA.cl_frames],eax
  471.     mov   dword [esi+WDATA.reserved],eax ; clear all flags: wstate, redraw, wdrawn
  472.     lea   edi, [esi-window_data+draw_data]
  473.     mov   ecx,32/4
  474.     rep   stosd
  475.     popa
  476.  
  477. ; debuggee test
  478.     pushad
  479.     mov  edi, esi
  480.     shl  edi, 5
  481.     mov  eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
  482.     test eax, eax
  483.     jz   .nodebug
  484.     push 8
  485.     pop  ecx
  486.     push dword [CURRENT_TASK+edi+TASKDATA.pid]   ; PID
  487.     push 2
  488.     call debugger_notify
  489.     pop  ecx
  490.     pop  ecx
  491. .nodebug:
  492.     popad
  493.  
  494.            mov ebx, [.slot]
  495.            shl ebx, 8
  496.            push ebx
  497.            mov ebx,[SLOT_BASE+ebx+APPDATA.pl0_stack]
  498.  
  499.            stdcall kernel_free, ebx
  500.  
  501.            pop ebx
  502.            mov ebx,[SLOT_BASE+ebx+APPDATA.cur_dir]
  503.            stdcall kernel_free, ebx
  504.  
  505.            mov edi, [.slot]
  506.            shl edi,8
  507.            add edi,SLOT_BASE
  508.  
  509.            mov eax, [edi+APPDATA.io_map]
  510.            cmp eax, [SLOT_BASE+256+APPDATA.io_map]
  511.            je @F
  512.            call free_page
  513. @@:
  514.            mov eax, [edi+APPDATA.io_map+4]
  515.            cmp eax, [SLOT_BASE+256+APPDATA.io_map+4]
  516.            je @F
  517.            call free_page
  518. @@:
  519.            mov eax, 0x20202020
  520.            stosd
  521.            stosd
  522.            stosd
  523.            mov ecx,244/4
  524.            xor eax, eax
  525.            rep stosd
  526.  
  527.   ; activate window
  528.         movzx  eax, word [WIN_STACK + esi*2]
  529.         cmp    eax, [TASK_COUNT]
  530.         jne    .dont_activate
  531.         pushad
  532.  .check_next_window:
  533.         dec    eax
  534.         cmp    eax, 1
  535.         jbe    .nothing_to_activate
  536.         lea    esi, [WIN_POS+eax*2]
  537.         movzx  edi, word [esi]               ; edi = process
  538.         shl    edi, 5
  539.         cmp    [CURRENT_TASK + edi + TASKDATA.state], byte 9  ; skip dead slots
  540.         je     .check_next_window
  541.         add    edi, window_data
  542. ; \begin{diamond}[19.09.2006]
  543. ; skip minimized windows
  544.         test   [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
  545.         jnz    .check_next_window
  546. ; \end{diamond}
  547.         call   waredraw
  548.  .nothing_to_activate:
  549.         popad
  550.  .dont_activate:
  551.  
  552.         push    esi     ; remove hd1 & cd & flp reservation
  553.         shl     esi, 5
  554.         mov     esi, [esi+CURRENT_TASK+TASKDATA.pid]
  555.         cmp     [hd1_status], esi
  556.         jnz     @f
  557.         call    free_hd_channel
  558.         and     [hd1_status], 0
  559. @@:
  560.         cmp     [cd_status], esi
  561.         jnz     @f
  562.         call    free_cd_channel
  563.         and     [cd_status], 0
  564. @@:
  565.         cmp     [flp_status], esi
  566.         jnz     @f
  567.         and     [flp_status], 0
  568. @@:
  569.         pop     esi
  570.         cmp     [bgrlockpid], esi
  571.         jnz     @f
  572.         and     [bgrlockpid], 0
  573.         and     [bgrlock], 0
  574. @@:
  575.  
  576.     pusha                     ; remove all port reservations
  577.     mov   edx,esi
  578.     shl   edx, 5
  579.     add   edx,CURRENT_TASK
  580.     mov   edx,[edx+TASKDATA.pid]
  581.  
  582.   rmpr0:
  583.  
  584.     mov   esi,[RESERVED_PORTS]
  585.  
  586.     test  esi,esi
  587.     jz    rmpr9
  588.  
  589.   rmpr3:
  590.  
  591.     mov   edi,esi
  592.     shl   edi,4
  593.     add   edi,RESERVED_PORTS
  594.  
  595.     cmp   edx,[edi]
  596.     je    rmpr4
  597.  
  598.     dec   esi
  599.     jnz   rmpr3
  600.  
  601.     jmp   rmpr9
  602.  
  603.   rmpr4:
  604.  
  605.     mov   ecx,256
  606.     sub   ecx,esi
  607.     shl   ecx,4
  608.  
  609.     mov   esi,edi
  610.     add   esi,16
  611.     cld
  612.     rep   movsb
  613.  
  614.     dec   dword [RESERVED_PORTS]
  615.  
  616.     jmp   rmpr0
  617.  
  618.   rmpr9:
  619.  
  620.     popa
  621.     mov  edi,esi         ; do not run this process slot
  622.     shl  edi, 5
  623.     mov  [edi+CURRENT_TASK + TASKDATA.state],byte 9
  624. ; debugger test - terminate all debuggees
  625.     mov  eax, 2
  626.     mov  ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
  627. .xd0:
  628.     cmp  eax, [TASK_COUNT]
  629.     ja   .xd1
  630.     cmp  dword [ecx], esi
  631.     jnz  @f
  632.     and  dword [ecx], 0
  633.     pushad
  634.     xchg eax, ecx
  635.     mov  ebx, 2
  636.     call sys_system
  637.     popad
  638. @@:
  639.     inc  eax
  640.     add  ecx, 0x100
  641.     jmp  .xd0
  642. .xd1:
  643. ;    call  systest
  644.     sti  ; .. and life goes on
  645.  
  646.     mov   eax, [draw_limits.left]
  647.     mov   ebx, [draw_limits.top]
  648.     mov   ecx, [draw_limits.right]
  649.     mov   edx, [draw_limits.bottom]
  650.     call  calculatescreen
  651.     xor   eax, eax
  652.     xor   esi, esi
  653.     call  redrawscreen
  654.  
  655.     mov   [MOUSE_BACKGROUND],byte 0  ; no mouse background
  656.     mov   [DONT_DRAW_MOUSE],byte 0  ; draw mouse
  657.  
  658.     and   [application_table_status],0
  659.     ;mov   esi,process_terminated
  660.     ;call  sys_msg_board_str
  661.     add esp, 4
  662.     ret
  663. restore .slot
  664.  
  665. iglobal
  666. if lang eq ru
  667.   boot_sched_1    db   '‘®§¤ ­¨¥ GDT TSS 㪠§ â¥«ï',0
  668.   boot_sched_2    db   '‘®§¤ ­¨¥ IDT â ¡«¨æë',0
  669. else
  670.   boot_sched_1    db   'Building gdt tss pointer',0
  671.   boot_sched_2    db   'Building IDT table',0
  672. end if
  673. endg
  674.  
  675.  
  676. build_scheduler:
  677.  
  678.         mov    esi,boot_sched_1
  679.         call   boot_log
  680.   ;      call   build_process_gdt_tss_pointer
  681.  
  682.   ;      mov    esi,boot_sched_2
  683.   ;      call   boot_log
  684.  
  685.         ret
  686.