Subversion Repositories Kolibri OS

Rev

Rev 2465 | Rev 3555 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  2. ;;                                                              ;;
  3. ;; Copyright (C) KolibriOS team 2004-2011. All rights reserved. ;;
  4. ;; Distributed under terms of the GNU General Public License    ;;
  5. ;;                                                              ;;
  6. ;;                                                              ;;
  7. ;;  MenuetOS process management, protected ring3                ;;
  8. ;;                                                              ;;
  9. ;;  Distributed under GPL. See file COPYING for details.        ;;
  10. ;;  Copyright 2003 Ville Turjanmaa                              ;;
  11. ;;                                                              ;;
  12. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  13.  
  14. $Revision: 2987 $
  15.  
  16.  
  17. align 4 ;3A08
  18. build_interrupt_table:
  19.         mov     edi, idts
  20.         mov     esi, sys_int
  21.         mov     ecx, 0x40
  22.         mov     eax, (10001110b shl 24) + os_code
  23.   @@:
  24.         movsw   ;low word of code-entry
  25.         stosd   ;interrupt gate type : os_code selector
  26.         movsw   ;high word of code-entry
  27.         loop    @b
  28.         movsd   ;copy low  dword of trap gate for int 0x40
  29.         movsd   ;copy high dword of trap gate for int 0x40
  30.         lidt    [esi]
  31.         ret
  32.  
  33. iglobal
  34.   align 4
  35.   sys_int:
  36.     ;exception handlers addresses (for interrupt gate construction)
  37.         dd      e0,e1,e2,e3,e4,e5,e6,except_7 ; SEE: core/fpu.inc
  38.         dd      e8,e9,e10,e11,e12,e13,page_fault_exc,e15
  39.         dd      e16, e17,e18, e19
  40.         times   12 dd unknown_interrupt ;int_20..int_31
  41.  
  42.     ;interrupt handlers addresses (for interrupt gate construction)
  43.         ; 0x20 .. 0x2F - IRQ handlers
  44.         dd      irq0, irq_serv.irq_1, irq_serv.irq_2
  45.         dd      irq_serv.irq_3, irq_serv.irq_4
  46.         dd      irq_serv.irq_5,  irq_serv.irq_6,  irq_serv.irq_7
  47.         dd      irq_serv.irq_8,  irq_serv.irq_9,  irq_serv.irq_10
  48.         dd      irq_serv.irq_11, irq_serv.irq_12, irqD, irq_serv.irq_14, irq_serv.irq_15
  49.         dd irq_serv.irq_16
  50.         dd irq_serv.irq_17
  51.         dd irq_serv.irq_18
  52.         dd irq_serv.irq_19
  53.         dd irq_serv.irq_20
  54.         dd irq_serv.irq_21
  55.         dd irq_serv.irq_22
  56.         dd irq_serv.irq_23
  57.  
  58.     times 32 - IRQ_RESERVED dd unknown_interrupt
  59.     ;int_0x40 gate trap (for directly copied)
  60.         dw      i40 and 0xFFFF, os_code, 11101111b shl 8, i40 shr 16
  61.  
  62.   idtreg: ; data for LIDT instruction (!!! must be immediately below sys_int data)
  63.         dw      2*($-sys_int-4)-1
  64.         dd      idts ;0x8000B100
  65.         dw      0    ;ïðîñòî âûðàâíèâàíèå
  66.  
  67.   msg_fault_sel dd  msg_exc_8,msg_exc_u,msg_exc_a,msg_exc_b
  68.                 dd  msg_exc_c,msg_exc_d,msg_exc_e
  69.  
  70.   msg_exc_8     db "Double fault", 0
  71.   msg_exc_u     db "Undefined Exception", 0
  72.   msg_exc_a     db "Invalid TSS", 0
  73.   msg_exc_b     db "Segment not present", 0
  74.   msg_exc_c     db "Stack fault", 0
  75.   msg_exc_d     db "General protection fault", 0
  76.   msg_exc_e     db "Page fault", 0
  77.  
  78.   msg_sel_ker   db "kernel", 0
  79.   msg_sel_app   db "application", 0
  80.  
  81. endg
  82.  
  83. macro save_ring3_context {
  84.         pushad
  85. }
  86. macro restore_ring3_context {
  87.         popad
  88. }
  89. macro exc_wo_code [num] {
  90.   e#num :
  91.         save_ring3_context
  92.         mov     bl, num
  93.         jmp     exc_c
  94. } exc_wo_code   0,1,2,3,4,5,6,15,16,19
  95.  
  96. macro exc_w_code [num] {
  97.   e#num :
  98.         add     esp, 4
  99.         save_ring3_context
  100.         mov     bl, num
  101.         jmp     exc_c
  102. } exc_w_code    8,9,10,11,12,13,17,18
  103.  
  104.  
  105. uglobal
  106.   pf_err_code   dd ?
  107. endg
  108.  
  109. page_fault_exc:                 ; äóðàêîóñòî÷èâîñòü: ñåëåêòîðû èñïîð÷åíû...
  110.         pop     [ss:pf_err_code]; äåéñòâèòåëüíî äî ñëåäóþùåãî #PF
  111.         save_ring3_context
  112.         mov     bl, 14
  113.  
  114. exc_c:                          ; èñêëþ÷åíèÿ (âñå, êðîìå 7-ãî - #NM)
  115. ; Ôðýéì ñòåêà ïðè èñêëþ÷åíèè/ïðåðûâàíèè èç 3-ãî êîëüöà + pushad (ò.å., èìåííî çäåñü)
  116.   reg_ss        equ esp+0x30
  117.   reg_esp3      equ esp+0x2C
  118.   reg_eflags    equ esp+0x28
  119.   reg_cs3       equ esp+0x24
  120.   reg_eip       equ esp+0x20
  121.  ; ýòî ôðýéì îò pushad
  122.   reg_eax       equ esp+0x1C
  123.   reg_ecx       equ esp+0x18
  124.   reg_edx       equ esp+0x14
  125.   reg_ebx       equ esp+0x10
  126.   reg_esp0      equ esp+0x0C
  127.   reg_ebp       equ esp+0x08
  128.   reg_esi       equ esp+0x04
  129.   reg_edi       equ esp+0x00
  130.  
  131.         mov     ax, app_data        ;èñêëþ÷åíèå
  132.         mov     ds, ax                  ;çàãðóçèì ïðàâèëüíûå çíà÷åíèÿ
  133.         mov     es, ax                  ;â ðåãèñòðû
  134.         cld                     ; è ïðèâîäèì DF ê ñòàíäàðòó
  135.         movzx   ebx, bl
  136. ; redirect to V86 manager? (EFLAGS & 0x20000) != 0?
  137.         test    byte[reg_eflags+2], 2
  138.         jnz     v86_exc_c
  139.         cmp     bl, 14          ; #PF
  140.         jne     @f
  141.         call    page_fault_handler ; SEE: core/memory.inc
  142.   @@:
  143.         mov     esi, [current_slot]
  144.         btr     [esi+APPDATA.except_mask], ebx
  145.         jnc     @f
  146.         mov     eax, [esi+APPDATA.exc_handler]
  147.         test    eax, eax
  148.         jnz     IRetToUserHook
  149.   @@:
  150.         cli
  151.         mov     eax, [esi+APPDATA.debugger_slot]
  152.         test    eax, eax
  153.         jnz     .debug
  154.         sti
  155. ; not debuggee => say error and terminate
  156.         call    show_error_parameters ;; only ONE using, inline ???
  157.        ;mov     edx, [TASK_BASE]
  158.         mov     [edx + TASKDATA.state], byte 4 ; terminate
  159.         jmp     change_task     ; stack - here it does not matter at all, SEE: core/shed.inc
  160. .debug:
  161. ; we are debugged process, notify debugger and suspend ourself
  162. ; eax=debugger PID
  163.         mov     ecx, 1          ; debug_message code=other_exception
  164.         cmp     bl, 1           ; #DB
  165.         jne     .notify         ; notify debugger and suspend ourself
  166.         mov     ebx, dr6        ; debug_message data=DR6_image
  167.         xor     edx, edx
  168.         mov     dr6, edx
  169.         mov     edx, dr7
  170.         mov     cl, not 8
  171.   .l1:
  172.         shl     dl, 2
  173.         jc      @f
  174.         and     bl, cl
  175.   @@:
  176.         sar     cl, 1
  177.         jc      .l1
  178.         mov     cl, 3           ; debug_message code=debug_exception
  179. .notify:
  180.         push    ebx             ; debug_message data
  181.         mov     ebx, [TASK_BASE]
  182.         push    [ebx+TASKDATA.pid] ; PID
  183.         push    ecx             ; debug_message code ((here: ecx==1/3))
  184.         mov     cl, 12          ; debug_message size
  185.         call    debugger_notify ;; only ONE using, inline ??? SEE: core/debug.inc
  186.         add     esp, 12
  187.         mov     edx, [TASK_BASE]
  188.         mov     byte [edx+TASKDATA.state], 1 ; suspended
  189.         call    change_task     ; SEE: core/shed.inc
  190.         restore_ring3_context
  191.         iretd
  192.  
  193. IRetToUserHook:
  194.         xchg    eax, [reg_eip]
  195.         sub     dword[reg_esp3], 8
  196.         mov     edi, [reg_esp3]
  197.         stosd
  198.         mov     [edi], ebx
  199.         restore_ring3_context
  200. ; simply return control to interrupted process
  201. unknown_interrupt:
  202.         iretd
  203.  
  204. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  205. ; bl - error vector
  206. show_error_parameters:
  207.         cmp     bl, 0x06
  208.         jnz     .no_ud
  209.         push    ebx
  210.         mov     ebx, ud_user_message
  211.         mov     ebp, notifyapp
  212.         call    fs_execute_from_sysdir_param
  213.         pop     ebx
  214. .no_ud:
  215.         mov     edx, [TASK_BASE];not scratched below
  216.         DEBUGF  1, "K : Process - forced terminate PID: %x\n", [edx+TASKDATA.pid]
  217.         cmp     bl, 0x08
  218.         jb      .l0
  219.         cmp     bl, 0x0e
  220.         jbe     .l1
  221.   .l0:
  222.         mov     bl, 0x09
  223.   .l1:
  224.         mov     eax, [msg_fault_sel+ebx*4 - 0x08*4]
  225.         DEBUGF  1, "K : %s\n", eax
  226.         mov     eax, [reg_cs3+4]
  227.         mov     edi, msg_sel_app
  228.         mov     ebx, [reg_esp3+4]
  229.         cmp     eax, app_code
  230.         je      @f
  231.         mov     edi, msg_sel_ker
  232.         mov     ebx, [reg_esp0+4]
  233.     @@:
  234.         DEBUGF  1, "K : EAX : %x EBX : %x ECX : %x\n", [reg_eax+4], [reg_ebx+4], [reg_ecx+4]
  235.         DEBUGF  1, "K : EDX : %x ESI : %x EDI : %x\n", [reg_edx+4], [reg_esi+4], [reg_edi+4]
  236.         DEBUGF  1, "K : EBP : %x EIP : %x ESP : %x\n", [reg_ebp+4], [reg_eip+4], ebx
  237.         DEBUGF  1, "K : Flags : %x CS : %x (%s)\n", [reg_eflags+4], eax, edi
  238.         ret
  239. ;-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
  240.  
  241.   restore  reg_ss
  242.   restore  reg_esp3
  243.   restore  reg_eflags
  244.   restore  reg_cs
  245.   restore  reg_eip
  246.   restore  reg_eax
  247.   restore  reg_ecx
  248.   restore  reg_edx
  249.   restore  reg_ebx
  250.   restore  reg_esp0
  251.   restore  reg_ebp
  252.   restore  reg_esi
  253.   restore  reg_edi
  254.  
  255.  
  256. align 4
  257. set_application_table_status:
  258.         push    eax
  259.  
  260.         mov     eax, [CURRENT_TASK]
  261.         shl     eax, 5
  262.         add     eax, CURRENT_TASK+TASKDATA.pid
  263.         mov     eax, [eax]
  264.  
  265.         mov     [application_table_status], eax
  266.  
  267.         pop     eax
  268.  
  269.         ret
  270.  
  271. align 4
  272. clear_application_table_status:
  273.         push    eax
  274.  
  275.         mov     eax, [CURRENT_TASK]
  276.         shl     eax, 5
  277.         add     eax, CURRENT_TASK+TASKDATA.pid
  278.         mov     eax, [eax]
  279.  
  280.         cmp     eax, [application_table_status]
  281.         jne     apptsl1
  282.         xor     eax, eax
  283.         mov     [application_table_status], eax
  284.       apptsl1:
  285.  
  286.         pop     eax
  287.  
  288.         ret
  289.  
  290. ;  * eax = 64 - íîìåð ôóíêöèè
  291. ;  * ebx = 1 - åäèíñòâåííàÿ ïîäôóíêöèÿ
  292. ;  * ecx = íîâûé ðàçìåð ïàìÿòè
  293. ;Âîçâðàùàåìîå çíà÷åíèå:
  294. ;  * eax = 0 - óñïåøíî
  295. ;  * eax = 1 - íåäîñòàòî÷íî ïàìÿòè
  296.  
  297. align 4
  298. sys_resize_app_memory:
  299.         ; ebx = 1 - resize
  300.         ; ecx = new amount of memory
  301.  
  302. ;        cmp    eax,1
  303.         dec     ebx
  304.         jnz     .no_application_mem_resize
  305.         stdcall new_mem_resize, ecx
  306.         mov     [esp+32], eax
  307. .no_application_mem_resize:
  308.         ret
  309.  
  310. iglobal
  311. ;  process_terminating  db 'K : Process - terminating',13,10,0
  312. ;  process_terminated   db 'K : Process - done',13,10,0
  313.   msg_obj_destroy       db 'K : destroy app object',13,10,0
  314. endg
  315.  
  316. ; param
  317. ;  esi= slot
  318.  
  319. align 4
  320. terminate: ; terminate application
  321.  
  322.            .slot equ esp   ;locals
  323.  
  324.         push    esi        ;save .slot
  325.  
  326.         shl     esi, 8
  327.         cmp     [SLOT_BASE+esi+APPDATA.dir_table], 0
  328.         jne     @F
  329.         pop     esi
  330.         shl     esi, 5
  331.         mov     [CURRENT_TASK+esi+TASKDATA.state], 9
  332.         ret
  333. @@:
  334.            ;mov    esi,process_terminating
  335.            ;call   sys_msg_board_str
  336. @@:
  337.         cli
  338.         cmp     [application_table_status], 0
  339.         je      term9
  340.         sti
  341.         call    change_task
  342.         jmp     @b
  343. term9:
  344.         call    set_application_table_status
  345.  
  346. ; if the process is in V86 mode...
  347.         mov     eax, [.slot]
  348.         shl     eax, 8
  349.         mov     esi, [eax+SLOT_BASE+APPDATA.pl0_stack]
  350.         add     esi, RING0_STACK_SIZE
  351.         cmp     [eax+SLOT_BASE+APPDATA.saved_esp0], esi
  352.         jz      .nov86
  353. ; ...it has page directory for V86 mode
  354.         mov     esi, [eax+SLOT_BASE+APPDATA.saved_esp0]
  355.         mov     ecx, [esi+4]
  356.         mov     [eax+SLOT_BASE+APPDATA.dir_table], ecx
  357. ; ...and I/O permission map for V86 mode
  358.         mov     ecx, [esi+12]
  359.         mov     [eax+SLOT_BASE+APPDATA.io_map], ecx
  360.         mov     ecx, [esi+8]
  361.         mov     [eax+SLOT_BASE+APPDATA.io_map+4], ecx
  362. .nov86:
  363.  
  364.         mov     esi, [.slot]
  365.         shl     esi, 8
  366.         add     esi, SLOT_BASE+APP_OBJ_OFFSET
  367. @@:
  368.         mov     eax, [esi+APPOBJ.fd]
  369.         test    eax, eax
  370.         jz      @F
  371.  
  372.         cmp     eax, esi
  373.         je      @F
  374.  
  375.         push    esi
  376.         call    [eax+APPOBJ.destroy]
  377.            DEBUGF 1,"%s",msg_obj_destroy
  378.         pop     esi
  379.         jmp     @B
  380. @@:
  381.  
  382.         mov     eax, [.slot]
  383.         shl     eax, 8
  384.         stdcall destroy_app_space, [SLOT_BASE+eax+APPDATA.dir_table], [SLOT_BASE+eax+APPDATA.dlls_list_ptr]
  385.  
  386.         mov     esi, [.slot]
  387.         cmp     [fpu_owner], esi ; if user fpu last -> fpu user = 1
  388.         jne     @F
  389.  
  390.         mov     [fpu_owner], 1
  391.         mov     eax, [256+SLOT_BASE+APPDATA.fpu_state]
  392.         clts
  393.         bt      [cpu_caps], CAPS_SSE
  394.         jnc     .no_SSE
  395.         fxrstor [eax]
  396.         jmp     @F
  397. .no_SSE:
  398.         fnclex
  399.         frstor  [eax]
  400. @@:
  401.  
  402.         mov     [KEY_COUNT], byte 0    ; empty keyboard buffer
  403.         mov     [BTN_COUNT], byte 0    ; empty button buffer
  404.  
  405.  
  406. ; remove defined hotkeys
  407.         mov     eax, hotkey_list
  408. .loop:
  409.         cmp     [eax+8], esi
  410.         jnz     .cont
  411.         mov     ecx, [eax]
  412.         jecxz   @f
  413.         push    dword [eax+12]
  414.         pop     dword [ecx+12]
  415. @@:
  416.         mov     ecx, [eax+12]
  417.         push    dword [eax]
  418.         pop     dword [ecx]
  419.         xor     ecx, ecx
  420.         mov     [eax], ecx
  421.         mov     [eax+4], ecx
  422.         mov     [eax+8], ecx
  423.         mov     [eax+12], ecx
  424. .cont:
  425.         add     eax, 16
  426.         cmp     eax, hotkey_list+256*16
  427.         jb      .loop
  428. ; get process PID
  429.         mov     eax, esi
  430.         shl     eax, 5
  431.         mov     eax, [eax+CURRENT_TASK+TASKDATA.pid]
  432. ; compare current lock input with process PID
  433.         cmp     eax, [PID_lock_input]
  434.         jne     @f
  435.  
  436.         xor     eax, eax
  437.         mov     [PID_lock_input], eax
  438. @@:
  439. ; remove hotkeys in buffer
  440.         mov     eax, hotkey_buffer
  441. .loop2:
  442.         cmp     [eax], esi
  443.         jnz     .cont2
  444.         and     dword [eax+4], 0
  445.         and     dword [eax], 0
  446. .cont2:
  447.         add     eax, 8
  448.         cmp     eax, hotkey_buffer+120*8
  449.         jb      .loop2
  450.  
  451.         mov     ecx, esi          ; remove buttons
  452.   bnewba2:
  453.         mov     edi, [BTN_ADDR]
  454.         mov     eax, edi
  455.         cld
  456.         movzx   ebx, word [edi]
  457.         inc     bx
  458.   bnewba:
  459.         dec     bx
  460.         jz      bnmba
  461.         add     eax, 0x10
  462.         cmp     cx, [eax]
  463.         jnz     bnewba
  464.         pusha
  465.         mov     ecx, ebx
  466.         inc     ecx
  467.         shl     ecx, 4
  468.         mov     ebx, eax
  469.         add     eax, 0x10
  470.         call    memmove
  471.         dec     dword [edi]
  472.         popa
  473.         jmp     bnewba2
  474.   bnmba:
  475.  
  476.         pusha   ; save window coordinates for window restoring
  477.         cld
  478.         shl     esi, 5
  479.         add     esi, window_data
  480.         mov     eax, [esi+WDATA.box.left]
  481.         mov     [draw_limits.left], eax
  482.         add     eax, [esi+WDATA.box.width]
  483.         mov     [draw_limits.right], eax
  484.         mov     eax, [esi+WDATA.box.top]
  485.         mov     [draw_limits.top], eax
  486.         add     eax, [esi+WDATA.box.height]
  487.         mov     [draw_limits.bottom], eax
  488.  
  489.         xor     eax, eax
  490.         mov     [esi+WDATA.box.left], eax
  491.         mov     [esi+WDATA.box.width], eax
  492.         mov     [esi+WDATA.box.top], eax
  493.         mov     [esi+WDATA.box.height], eax
  494.         mov     [esi+WDATA.cl_workarea], eax
  495.         mov     [esi+WDATA.cl_titlebar], eax
  496.         mov     [esi+WDATA.cl_frames], eax
  497.         mov     dword [esi+WDATA.reserved], eax; clear all flags: wstate, redraw, wdrawn
  498.         lea     edi, [esi-window_data+draw_data]
  499.         mov     ecx, 32/4
  500.         rep stosd
  501.         popa
  502.  
  503. ; debuggee test
  504.         pushad
  505.         mov     edi, esi
  506.         shl     edi, 5
  507.         mov     eax, [SLOT_BASE+edi*8+APPDATA.debugger_slot]
  508.         test    eax, eax
  509.         jz      .nodebug
  510.         push    8
  511.         pop     ecx
  512.         push    dword [CURRENT_TASK+edi+TASKDATA.pid]; PID
  513.         push    2
  514.         call    debugger_notify
  515.         pop     ecx
  516.         pop     ecx
  517. .nodebug:
  518.         popad
  519.  
  520.         mov     ebx, [.slot]
  521.         shl     ebx, 8
  522.         push    ebx
  523.         mov     ebx, [SLOT_BASE+ebx+APPDATA.pl0_stack]
  524.  
  525.         stdcall kernel_free, ebx
  526.  
  527.         pop     ebx
  528.         mov     ebx, [SLOT_BASE+ebx+APPDATA.cur_dir]
  529.         stdcall kernel_free, ebx
  530.  
  531.         mov     edi, [.slot]
  532.         shl     edi, 8
  533.         add     edi, SLOT_BASE
  534.  
  535.         mov     eax, [edi+APPDATA.io_map]
  536.         cmp     eax, [SLOT_BASE+256+APPDATA.io_map]
  537.         je      @F
  538.         call    free_page
  539. @@:
  540.         mov     eax, [edi+APPDATA.io_map+4]
  541.         cmp     eax, [SLOT_BASE+256+APPDATA.io_map+4]
  542.         je      @F
  543.         call    free_page
  544. @@:
  545.         mov     eax, 0x20202020
  546.         stosd
  547.         stosd
  548.         stosd
  549.         mov     ecx, 244/4
  550.         xor     eax, eax
  551.         rep stosd
  552.  
  553.   ; activate window
  554.         movzx   eax, word [WIN_STACK + esi*2]
  555.         cmp     eax, [TASK_COUNT]
  556.         jne     .dont_activate
  557.         pushad
  558.  .check_next_window:
  559.         dec     eax
  560.         cmp     eax, 1
  561.         jbe     .nothing_to_activate
  562.         lea     esi, [WIN_POS+eax*2]
  563.         movzx   edi, word [esi]              ; edi = process
  564.         shl     edi, 5
  565.         cmp     [CURRENT_TASK + edi + TASKDATA.state], byte 9 ; skip dead slots
  566.         je      .check_next_window
  567.         add     edi, window_data
  568. ; \begin{diamond}[19.09.2006]
  569. ; skip minimized windows
  570.         test    [edi + WDATA.fl_wstate], WSTATE_MINIMIZED
  571.         jnz     .check_next_window
  572. ; \end{diamond}
  573.         call    waredraw
  574.  .nothing_to_activate:
  575.         popad
  576.  .dont_activate:
  577.  
  578.         push    esi     ; remove hd1 & cd & flp reservation
  579.         shl     esi, 5
  580.         mov     esi, [esi+CURRENT_TASK+TASKDATA.pid]
  581.         cmp     [hd1_status], esi
  582.         jnz     @f
  583.         call    free_hd_channel
  584.         and     [hd1_status], 0
  585. @@:
  586.         cmp     [cd_status], esi
  587.         jnz     @f
  588.         call    free_cd_channel
  589.         and     [cd_status], 0
  590. @@:
  591.         cmp     [flp_status], esi
  592.         jnz     @f
  593.         and     [flp_status], 0
  594. @@:
  595.         pop     esi
  596.         cmp     [bgrlockpid], esi
  597.         jnz     @f
  598.         and     [bgrlockpid], 0
  599.         and     [bgrlock], 0
  600. @@:
  601.  
  602.         pusha                 ; remove all port reservations
  603.         mov     edx, esi
  604.         shl     edx, 5
  605.         add     edx, CURRENT_TASK
  606.         mov     edx, [edx+TASKDATA.pid]
  607.  
  608.   rmpr0:
  609.  
  610.         mov     esi, [RESERVED_PORTS]
  611.  
  612.         test    esi, esi
  613.         jz      rmpr9
  614.  
  615.   rmpr3:
  616.  
  617.         mov     edi, esi
  618.         shl     edi, 4
  619.         add     edi, RESERVED_PORTS
  620.  
  621.         cmp     edx, [edi]
  622.         je      rmpr4
  623.  
  624.         dec     esi
  625.         jnz     rmpr3
  626.  
  627.         jmp     rmpr9
  628.  
  629.   rmpr4:
  630.  
  631.         mov     ecx, 256
  632.         sub     ecx, esi
  633.         shl     ecx, 4
  634.  
  635.         mov     esi, edi
  636.         add     esi, 16
  637.         cld
  638.         rep movsb
  639.  
  640.         dec     dword [RESERVED_PORTS]
  641.  
  642.         jmp     rmpr0
  643.  
  644.   rmpr9:
  645.  
  646.         popa
  647.         mov     edi, esi ; do not run this process slot
  648.         shl     edi, 5
  649.         mov     [edi+CURRENT_TASK + TASKDATA.state], byte 9
  650. ; debugger test - terminate all debuggees
  651.         mov     eax, 2
  652.         mov     ecx, SLOT_BASE+2*0x100+APPDATA.debugger_slot
  653. .xd0:
  654.         cmp     eax, [TASK_COUNT]
  655.         ja      .xd1
  656.         cmp     dword [ecx], esi
  657.         jnz     @f
  658.         and     dword [ecx], 0
  659.         pushad
  660.         xchg    eax, ecx
  661.         mov     ebx, 2
  662.         call    sys_system
  663.         popad
  664. @@:
  665.         inc     eax
  666.         add     ecx, 0x100
  667.         jmp     .xd0
  668. .xd1:
  669. ;    call  systest
  670.         sti     ; .. and life goes on
  671.  
  672.         mov     eax, [draw_limits.left]
  673.         mov     ebx, [draw_limits.top]
  674.         mov     ecx, [draw_limits.right]
  675.         mov     edx, [draw_limits.bottom]
  676.         call    calculatescreen
  677.         xor     eax, eax
  678.         xor     esi, esi
  679.         call    redrawscreen
  680.  
  681.         mov     [MOUSE_BACKGROUND], byte 0; no mouse background
  682.         mov     [DONT_DRAW_MOUSE], byte 0; draw mouse
  683.  
  684.         and     [application_table_status], 0
  685.     ;mov   esi,process_terminated
  686.     ;call  sys_msg_board_str
  687.         add     esp, 4
  688.         ret
  689. restore .slot
  690.  
  691. ;iglobal
  692. ;if lang eq ru
  693. ;  boot_sched_1    db   '‘®§¤ ­¨¥ GDT TSS 㪠§ â¥«ï',0
  694. ;  boot_sched_2    db   '‘®§¤ ­¨¥ IDT â ¡«¨æë',0
  695. ;else
  696. ;  boot_sched_1    db   'Building gdt tss pointer',0
  697. ;  boot_sched_2    db   'Building IDT table',0
  698. ;end if
  699. ;endg
  700.  
  701.  
  702. ;build_scheduler:
  703. ;        mov     esi, boot_sched_1
  704. ;        call    boot_log
  705. ;        call   build_process_gdt_tss_pointer
  706.  
  707. ;        mov    esi,boot_sched_2
  708. ;        call   boot_log
  709. ;        ret
  710.