/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
/**
* DOC: Panel Self Refresh (PSR/SRD)
*
* Since Haswell Display controller supports Panel Self-Refresh on display
* panels witch have a remote frame buffer (RFB) implemented according to PSR
* spec in eDP1.3. PSR feature allows the display to go to lower standby states
* when system is idle but display is on as it eliminates display refresh
* request to DDR memory completely as long as the frame buffer for that
* display is unchanged.
*
* Panel Self Refresh must be supported by both Hardware (source) and
* Panel (sink).
*
* PSR saves power by caching the framebuffer in the panel RFB, which allows us
* to power down the link and memory controller. For DSI panels the same idea
* is called "manual mode".
*
* The implementation uses the hardware-based PSR support which automatically
* enters/exits self-refresh mode. The hardware takes care of sending the
* required DP aux message and could even retrain the link (that part isn't
* enabled yet though). The hardware also keeps track of any frontbuffer
* changes to know when to exit self-refresh mode again. Unfortunately that
* part doesn't work too well, hence why the i915 PSR support uses the
* software frontbuffer tracking to make sure it doesn't miss a screen
* update. For this integration intel_psr_invalidate() and intel_psr_flush()
* get called by the frontbuffer tracking code. Note that because of locking
* issues the self-refresh re-enable code is done from a work queue, which
* must be correctly synchronized/cancelled when shutting down the pipe."
*/
#include <drm/drmP.h>
#include "intel_drv.h"
#include "i915_drv.h"
static bool is_edp_psr(struct intel_dp *intel_dp)
{
return intel_dp->psr_dpcd[0] & DP_PSR_IS_SUPPORTED;
}
static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t val;
val = I915_READ(VLV_PSRSTAT(pipe)) &
VLV_EDP_PSR_CURR_STATE_MASK;
return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
(val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
}
static void intel_psr_write_vsc(struct intel_dp *intel_dp,
const struct edp_vsc_psr *vsc_psr)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
enum transcoder cpu_transcoder = crtc->config->cpu_transcoder;
i915_reg_t ctl_reg = HSW_TVIDEO_DIP_CTL(cpu_transcoder);
uint32_t *data = (uint32_t *) vsc_psr;
unsigned int i;
/* As per BSPec (Pipe Video Data Island Packet), we need to disable
the video DIP being updated before program video DIP data buffer
registers for DIP being updated. */
I915_WRITE(ctl_reg, 0);
POSTING_READ(ctl_reg);
for (i = 0; i < sizeof(*vsc_psr); i += 4) {
I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
i >> 2), *data);
data++;
}
for (; i < VIDEO_DIP_VSC_DATA_SIZE; i += 4)
I915_WRITE(HSW_TVIDEO_DIP_VSC_DATA(cpu_transcoder,
i >> 2), 0);
I915_WRITE(ctl_reg, VIDEO_DIP_ENABLE_VSC_HSW);
POSTING_READ(ctl_reg);
}
static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
uint32_t val;
/* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
val = I915_READ(VLV_VSCSDP(pipe));
val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
I915_WRITE(VLV_VSCSDP(pipe), val);
}
static void skl_psr_setup_su_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
memset(&psr_vsc
, 0, sizeof(psr_vsc
)); psr_vsc.sdp_header.HB0 = 0;
psr_vsc.sdp_header.HB1 = 0x7;
psr_vsc.sdp_header.HB2 = 0x3;
psr_vsc.sdp_header.HB3 = 0xb;
intel_psr_write_vsc(intel_dp, &psr_vsc);
}
static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
{
struct edp_vsc_psr psr_vsc;
/* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
memset(&psr_vsc
, 0, sizeof(psr_vsc
)); psr_vsc.sdp_header.HB0 = 0;
psr_vsc.sdp_header.HB1 = 0x7;
psr_vsc.sdp_header.HB2 = 0x2;
psr_vsc.sdp_header.HB3 = 0x8;
intel_psr_write_vsc(intel_dp, &psr_vsc);
}
static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
{
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
}
static i915_reg_t psr_aux_ctl_reg(struct drm_i915_private *dev_priv,
enum port port)
{
if (INTEL_INFO(dev_priv)->gen >= 9)
return DP_AUX_CH_CTL(port);
else
return EDP_PSR_AUX_CTL;
}
static i915_reg_t psr_aux_data_reg(struct drm_i915_private *dev_priv,
enum port port, int index)
{
if (INTEL_INFO(dev_priv)->gen >= 9)
return DP_AUX_CH_DATA(port, index);
else
return EDP_PSR_AUX_DATA(index);
}
static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t aux_clock_divider;
i915_reg_t aux_ctl_reg;
int precharge = 0x3;
static const uint8_t aux_msg[] = {
[0] = DP_AUX_NATIVE_WRITE << 4,
[1] = DP_SET_POWER >> 8,
[2] = DP_SET_POWER & 0xff,
[3] = 1 - 1,
[4] = DP_SET_POWER_D0,
};
enum port port = dig_port->port;
int i;
BUILD_BUG_ON(sizeof(aux_msg) > 20);
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
/* Enable AUX frame sync at sink */
if (dev_priv->psr.aux_frame_sync)
drm_dp_dpcd_writeb(&intel_dp->aux,
DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
DP_AUX_FRAME_SYNC_ENABLE);
aux_ctl_reg = psr_aux_ctl_reg(dev_priv, port);
/* Setup AUX registers */
for (i = 0; i < sizeof(aux_msg); i += 4)
I915_WRITE(psr_aux_data_reg(dev_priv, port, i >> 2),
intel_dp_pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
if (INTEL_INFO(dev)->gen >= 9) {
uint32_t val;
val = I915_READ(aux_ctl_reg);
val &= ~DP_AUX_CH_CTL_TIME_OUT_MASK;
val |= DP_AUX_CH_CTL_TIME_OUT_1600us;
val &= ~DP_AUX_CH_CTL_MESSAGE_SIZE_MASK;
val |= (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT);
/* Use hardcoded data values for PSR, frame sync and GTC */
val &= ~DP_AUX_CH_CTL_PSR_DATA_AUX_REG_SKL;
val &= ~DP_AUX_CH_CTL_FS_DATA_AUX_REG_SKL;
val &= ~DP_AUX_CH_CTL_GTC_DATA_AUX_REG_SKL;
I915_WRITE(aux_ctl_reg, val);
} else {
I915_WRITE(aux_ctl_reg,
DP_AUX_CH_CTL_TIME_OUT_400us |
(sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
(aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
}
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, DP_PSR_ENABLE);
}
static void vlv_psr_enable_source(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dig_port->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
/* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
I915_WRITE(VLV_PSRCTL(pipe),
VLV_EDP_PSR_MODE_SW_TIMER |
VLV_EDP_PSR_SRC_TRANSMITTER_STATE |
VLV_EDP_PSR_ENABLE);
}
static void vlv_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dig_port->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
/* Let's do the transition from PSR_state 1 to PSR_state 2
* that is PSR transition to active - static frame transmission.
* Then Hardware is responsible for the transition to PSR_state 3
* that is PSR active - no Remote Frame Buffer (RFB) update.
*/
I915_WRITE(VLV_PSRCTL(pipe), I915_READ(VLV_PSRCTL(pipe)) |
VLV_EDP_PSR_ACTIVE_ENTRY);
}
static void hsw_psr_enable_source(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t max_sleep_time = 0x1f;
/*
* Let's respect VBT in case VBT asks a higher idle_frame value.
* Let's use 6 as the minimum to cover all known cases including
* the off-by-one issue that HW has in some cases. Also there are
* cases where sink should be able to train
* with the 5 or 6 idle patterns.
*/
uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
uint32_t val = EDP_PSR_ENABLE;
val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
if (IS_HASWELL(dev))
val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
if (dev_priv->vbt.psr.tp1_wakeup_time > 5)
val |= EDP_PSR_TP1_TIME_2500us;
else if (dev_priv->vbt.psr.tp1_wakeup_time > 1)
val |= EDP_PSR_TP1_TIME_500us;
else if (dev_priv->vbt.psr.tp1_wakeup_time > 0)
val |= EDP_PSR_TP1_TIME_100us;
else
val |= EDP_PSR_TP1_TIME_0us;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR_TP2_TP3_TIME_2500us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
val |= EDP_PSR_TP2_TP3_TIME_500us;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
val |= EDP_PSR_TP2_TP3_TIME_100us;
else
val |= EDP_PSR_TP2_TP3_TIME_0us;
if (intel_dp_source_supports_hbr2(intel_dp) &&
drm_dp_tps3_supported(intel_dp->dpcd))
val |= EDP_PSR_TP1_TP3_SEL;
else
val |= EDP_PSR_TP1_TP2_SEL;
I915_WRITE(EDP_PSR_CTL, val);
if (!dev_priv->psr.psr2_support)
return;
/* FIXME: selective update is probably totally broken because it doesn't
* mesh at all with our frontbuffer tracking. And the hw alone isn't
* good enough. */
val = EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
val |= EDP_PSR2_TP2_TIME_2500;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
val |= EDP_PSR2_TP2_TIME_500;
else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
val |= EDP_PSR2_TP2_TIME_100;
else
val |= EDP_PSR2_TP2_TIME_50;
I915_WRITE(EDP_PSR2_CTL, val);
}
static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
{
struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = dig_port->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
lockdep_assert_held(&dev_priv->psr.lock);
WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
dev_priv->psr.source_ok = false;
if (IS_HASWELL(dev) && dig_port->port != PORT_A) {
DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
return false;
}
if (!i915.enable_psr) {
DRM_DEBUG_KMS("PSR disable by flag\n");
return false;
}
if (IS_HASWELL(dev) &&
I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config->cpu_transcoder)) &
S3D_ENABLE) {
DRM_DEBUG_KMS("PSR condition failed: Stereo 3D is Enabled\n");
return false;
}
if (IS_HASWELL(dev) &&
intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
DRM_DEBUG_KMS("PSR condition failed: Interlaced is Enabled\n");
return false;
}
if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
((dev_priv->vbt.psr.full_link) || (dig_port->port != PORT_A))) {
DRM_DEBUG_KMS("PSR condition failed: Link Standby requested/needed but not supported on this platform\n");
return false;
}
dev_priv->psr.source_ok = true;
return true;
}
static void intel_psr_activate(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
WARN_ON(dev_priv->psr.active);
lockdep_assert_held(&dev_priv->psr.lock);
/* Enable/Re-enable PSR on the host */
if (HAS_DDI(dev))
/* On HSW+ after we enable PSR on source it will activate it
* as soon as it match configure idle_frame count. So
* we just actually enable it here on activation time.
*/
hsw_psr_enable_source(intel_dp);
else
vlv_psr_activate(intel_dp);
dev_priv->psr.active = true;
}
/**
* intel_psr_enable - Enable PSR
* @intel_dp: Intel DP
*
* This function can only be called after the pipe is fully trained and enabled.
*/
void intel_psr_enable(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
if (!HAS_PSR(dev)) {
DRM_DEBUG_KMS("PSR not supported on this platform\n");
return;
}
if (!is_edp_psr(intel_dp)) {
DRM_DEBUG_KMS("PSR not supported by this panel\n");
return;
}
mutex_lock(&dev_priv->psr.lock);
if (dev_priv->psr.enabled) {
DRM_DEBUG_KMS("PSR already in use\n");
goto unlock;
}
if (!intel_psr_match_conditions(intel_dp))
goto unlock;
dev_priv->psr.busy_frontbuffer_bits = 0;
if (HAS_DDI(dev)) {
hsw_psr_setup_vsc(intel_dp);
if (dev_priv->psr.psr2_support) {
/* PSR2 is restricted to work with panel resolutions upto 3200x2000 */
if (crtc->config->pipe_src_w > 3200 ||
crtc->config->pipe_src_h > 2000)
dev_priv->psr.psr2_support = false;
else
skl_psr_setup_su_vsc(intel_dp);
}
/*
* Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD.
* Also mask LPSP to avoid dependency on other drivers that
* might block runtime_pm besides preventing other hw tracking
* issues now we can rely on frontbuffer tracking.
*/
I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP |
EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
/* Enable PSR on the panel */
hsw_psr_enable_sink(intel_dp);
if (INTEL_INFO(dev)->gen >= 9)
intel_psr_activate(intel_dp);
} else {
vlv_psr_setup_vsc(intel_dp);
/* Enable PSR on the panel */
vlv_psr_enable_sink(intel_dp);
/* On HSW+ enable_source also means go to PSR entry/active
* state as soon as idle_frame achieved and here would be
* to soon. However on VLV enable_source just enable PSR
* but let it on inactive state. So we might do this prior
* to active transition, i.e. here.
*/
vlv_psr_enable_source(intel_dp);
}
/*
* FIXME: Activation should happen immediately since this function
* is just called after pipe is fully trained and enabled.
* However on every platform we face issues when first activation
* follows a modeset so quickly.
* - On VLV/CHV we get bank screen on first activation
* - On HSW/BDW we get a recoverable frozen screen until next
* exit-activate sequence.
*/
if (INTEL_INFO(dev)->gen < 9)
schedule_delayed_work(&dev_priv->psr.work,
msecs_to_jiffies(intel_dp->panel_power_cycle_delay * 5));
dev_priv->psr.enabled = intel_dp;
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void vlv_psr_disable(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc =
to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t val;
if (dev_priv->psr.active) {
/* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
if (wait_for((I915_READ(VLV_PSRSTAT(intel_crtc->pipe)) &
VLV_EDP_PSR_IN_TRANS) == 0, 1))
WARN(1, "PSR transition took longer than expected\n");
val = I915_READ(VLV_PSRCTL(intel_crtc->pipe));
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
val &= ~VLV_EDP_PSR_ENABLE;
val &= ~VLV_EDP_PSR_MODE_MASK;
I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val);
dev_priv->psr.active = false;
} else {
WARN_ON(vlv_is_psr_active_on_pipe(dev, intel_crtc->pipe));
}
}
static void hsw_psr_disable(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->psr.active) {
I915_WRITE(EDP_PSR_CTL,
I915_READ(EDP_PSR_CTL) & ~EDP_PSR_ENABLE);
/* Wait till PSR is idle */
if (_wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 2000, 10))
DRM_ERROR("Timed out waiting for PSR Idle State\n");
dev_priv->psr.active = false;
} else {
WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
}
}
/**
* intel_psr_disable - Disable PSR
* @intel_dp: Intel DP
*
* This function needs to be called before disabling pipe.
*/
void intel_psr_disable(struct intel_dp *intel_dp)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
/* Disable PSR on Source */
if (HAS_DDI(dev))
hsw_psr_disable(intel_dp);
else
vlv_psr_disable(intel_dp);
/* Disable PSR on Sink */
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0);
dev_priv->psr.enabled = NULL;
mutex_unlock(&dev_priv->psr.lock);
cancel_delayed_work_sync(&dev_priv->psr.work);
}
static void intel_psr_work(struct work_struct *work)
{
struct drm_i915_private *dev_priv =
container_of(work, typeof(*dev_priv), psr.work.work);
struct intel_dp *intel_dp = dev_priv->psr.enabled;
struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
/* We have to make sure PSR is ready for re-enable
* otherwise it keeps disabled until next full enable/disable cycle.
* PSR might take some time to get fully disabled
* and be ready for re-enable.
*/
if (HAS_DDI(dev_priv->dev)) {
if (wait_for((I915_READ(EDP_PSR_STATUS_CTL) &
EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
}
} else {
if (wait_for((I915_READ(VLV_PSRSTAT(pipe)) &
VLV_EDP_PSR_IN_TRANS) == 0, 1)) {
DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
return;
}
}
mutex_lock(&dev_priv->psr.lock);
intel_dp = dev_priv->psr.enabled;
if (!intel_dp)
goto unlock;
/*
* The delayed work can race with an invalidate hence we need to
* recheck. Since psr_flush first clears this and then reschedules we
* won't ever miss a flush when bailing out here.
*/
if (dev_priv->psr.busy_frontbuffer_bits)
goto unlock;
intel_psr_activate(intel_dp);
unlock:
mutex_unlock(&dev_priv->psr.lock);
}
static void intel_psr_exit(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dp *intel_dp = dev_priv->psr.enabled;
struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
enum pipe pipe = to_intel_crtc(crtc)->pipe;
u32 val;
if (!dev_priv->psr.active)
return;
if (HAS_DDI(dev)) {
val = I915_READ(EDP_PSR_CTL);
WARN_ON(!(val & EDP_PSR_ENABLE));
I915_WRITE(EDP_PSR_CTL, val & ~EDP_PSR_ENABLE);
} else {
val = I915_READ(VLV_PSRCTL(pipe));
/* Here we do the transition from PSR_state 3 to PSR_state 5
* directly once PSR State 4 that is active with single frame
* update can be skipped. PSR_state 5 that is PSR exit then
* Hardware is responsible to transition back to PSR_state 1
* that is PSR inactive. Same state after
* vlv_edp_psr_enable_source.
*/
val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
I915_WRITE(VLV_PSRCTL(pipe), val);
/* Send AUX wake up - Spec says after transitioning to PSR
* active we have to send AUX wake up by writing 01h in DPCD
* 600h of sink device.
* XXX: This might slow down the transition, but without this
* HW doesn't complete the transition to PSR_state 1 and we
* never get the screen updated.
*/
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
DP_SET_POWER_D0);
}
dev_priv->psr.active = false;
}
/**
* intel_psr_single_frame_update - Single Frame Update
* @dev: DRM device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* Some platforms support a single frame update feature that is used to
* send and update only one frame on Remote Frame Buffer.
* So far it is only implemented for Valleyview and Cherryview because
* hardware requires this to be done before a page flip.
*/
void intel_psr_single_frame_update(struct drm_device *dev,
unsigned frontbuffer_bits)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
enum pipe pipe;
u32 val;
/*
* Single frame update is already supported on BDW+ but it requires
* many W/A and it isn't really needed.
*/
if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev))
return;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
if (frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)) {
val = I915_READ(VLV_PSRCTL(pipe));
/*
* We need to set this bit before writing registers for a flip.
* This bit will be self-clear when it gets to the PSR active state.
*/
I915_WRITE(VLV_PSRCTL(pipe), val | VLV_EDP_PSR_SINGLE_FRAME_UPDATE);
}
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_invalidate - Invalidade PSR
* @dev: DRM device
* @frontbuffer_bits: frontbuffer plane tracking bits
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering starts and a buffer gets dirtied. PSR must be
* disabled if the frontbuffer mask contains a buffer relevant to PSR.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits."
*/
void intel_psr_invalidate(struct drm_device *dev,
unsigned frontbuffer_bits)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
enum pipe pipe;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->psr.busy_frontbuffer_bits |= frontbuffer_bits;
if (frontbuffer_bits)
intel_psr_exit(dev);
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_flush - Flush PSR
* @dev: DRM device
* @frontbuffer_bits: frontbuffer plane tracking bits
* @origin: which operation caused the flush
*
* Since the hardware frontbuffer tracking has gaps we need to integrate
* with the software frontbuffer tracking. This function gets called every
* time frontbuffer rendering has completed and flushed out to memory. PSR
* can be enabled again if no other frontbuffer relevant to PSR is dirty.
*
* Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
*/
void intel_psr_flush(struct drm_device *dev,
unsigned frontbuffer_bits, enum fb_op_origin origin)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
enum pipe pipe;
mutex_lock(&dev_priv->psr.lock);
if (!dev_priv->psr.enabled) {
mutex_unlock(&dev_priv->psr.lock);
return;
}
crtc = dp_to_dig_port(dev_priv->psr.enabled)->base.base.crtc;
pipe = to_intel_crtc(crtc)->pipe;
frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits;
/* By definition flush = invalidate + flush */
if (frontbuffer_bits)
intel_psr_exit(dev);
// if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
// if (!work_busy(&dev_priv->psr.work.work))
// schedule_delayed_work(&dev_priv->psr.work,
// msecs_to_jiffies(100));
mutex_unlock(&dev_priv->psr.lock);
}
/**
* intel_psr_init - Init basic PSR work and mutex.
* @dev: DRM device
*
* This function is called only once at driver load to initialize basic
* PSR stuff.
*/
void intel_psr_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
mutex_init(&dev_priv->psr.lock);
}