Subversion Repositories Kolibri OS

Rev

Rev 5060 | Rev 5354 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. /*
  2.  * Copyright © 2006 Intel Corporation
  3.  *
  4.  * Permission is hereby granted, free of charge, to any person obtaining a
  5.  * copy of this software and associated documentation files (the "Software"),
  6.  * to deal in the Software without restriction, including without limitation
  7.  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  8.  * and/or sell copies of the Software, and to permit persons to whom the
  9.  * Software is furnished to do so, subject to the following conditions:
  10.  *
  11.  * The above copyright notice and this permission notice (including the next
  12.  * paragraph) shall be included in all copies or substantial portions of the
  13.  * Software.
  14.  *
  15.  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16.  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17.  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18.  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19.  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  20.  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  21.  * SOFTWARE.
  22.  *
  23.  * Authors:
  24.  *    Eric Anholt <eric@anholt.net>
  25.  *
  26.  */
  27. #include <linux/dmi.h>
  28. #include <drm/drm_dp_helper.h>
  29. #include <drm/drmP.h>
  30. #include <drm/i915_drm.h>
  31. #include "i915_drv.h"
  32. #include "intel_bios.h"
  33.  
  34. #define SLAVE_ADDR1     0x70
  35. #define SLAVE_ADDR2     0x72
  36.  
  37. static int panel_type;
  38.  
  39. static void *
  40. find_section(struct bdb_header *bdb, int section_id)
  41. {
  42.         u8 *base = (u8 *)bdb;
  43.         int index = 0;
  44.         u16 total, current_size;
  45.         u8 current_id;
  46.  
  47.         /* skip to first section */
  48.         index += bdb->header_size;
  49.         total = bdb->bdb_size;
  50.  
  51.         /* walk the sections looking for section_id */
  52.         while (index + 3 < total) {
  53.                 current_id = *(base + index);
  54.                 index++;
  55.  
  56.                 current_size = *((u16 *)(base + index));
  57.                 index += 2;
  58.  
  59.                 if (index + current_size > total)
  60.                         return NULL;
  61.  
  62.                 if (current_id == section_id)
  63.                         return base + index;
  64.  
  65.                 index += current_size;
  66.         }
  67.  
  68.         return NULL;
  69. }
  70.  
  71. static u16
  72. get_blocksize(void *p)
  73. {
  74.         u16 *block_ptr, block_size;
  75.  
  76.         block_ptr = (u16 *)((char *)p - 2);
  77.         block_size = *block_ptr;
  78.         return block_size;
  79. }
  80.  
  81. static void
  82. fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
  83.                         const struct lvds_dvo_timing *dvo_timing)
  84. {
  85.         panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
  86.                 dvo_timing->hactive_lo;
  87.         panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
  88.                 ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
  89.         panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
  90.                 dvo_timing->hsync_pulse_width;
  91.         panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
  92.                 ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
  93.  
  94.         panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
  95.                 dvo_timing->vactive_lo;
  96.         panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
  97.                 dvo_timing->vsync_off;
  98.         panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
  99.                 dvo_timing->vsync_pulse_width;
  100.         panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
  101.                 ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
  102.         panel_fixed_mode->clock = dvo_timing->clock * 10;
  103.         panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
  104.  
  105.         if (dvo_timing->hsync_positive)
  106.                 panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
  107.         else
  108.                 panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
  109.  
  110.         if (dvo_timing->vsync_positive)
  111.                 panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
  112.         else
  113.                 panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
  114.  
  115.         /* Some VBTs have bogus h/vtotal values */
  116.         if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
  117.                 panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
  118.         if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
  119.                 panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
  120.  
  121.         drm_mode_set_name(panel_fixed_mode);
  122. }
  123.  
  124. static bool
  125. lvds_dvo_timing_equal_size(const struct lvds_dvo_timing *a,
  126.                            const struct lvds_dvo_timing *b)
  127. {
  128.         if (a->hactive_hi != b->hactive_hi ||
  129.             a->hactive_lo != b->hactive_lo)
  130.                 return false;
  131.  
  132.         if (a->hsync_off_hi != b->hsync_off_hi ||
  133.             a->hsync_off_lo != b->hsync_off_lo)
  134.                 return false;
  135.  
  136.         if (a->hsync_pulse_width != b->hsync_pulse_width)
  137.                 return false;
  138.  
  139.         if (a->hblank_hi != b->hblank_hi ||
  140.             a->hblank_lo != b->hblank_lo)
  141.                 return false;
  142.  
  143.         if (a->vactive_hi != b->vactive_hi ||
  144.             a->vactive_lo != b->vactive_lo)
  145.                 return false;
  146.  
  147.         if (a->vsync_off != b->vsync_off)
  148.                 return false;
  149.  
  150.         if (a->vsync_pulse_width != b->vsync_pulse_width)
  151.                 return false;
  152.  
  153.         if (a->vblank_hi != b->vblank_hi ||
  154.             a->vblank_lo != b->vblank_lo)
  155.                 return false;
  156.  
  157.         return true;
  158. }
  159.  
  160. static const struct lvds_dvo_timing *
  161. get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
  162.                     const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs,
  163.                     int index)
  164. {
  165.         /*
  166.          * the size of fp_timing varies on the different platform.
  167.          * So calculate the DVO timing relative offset in LVDS data
  168.          * entry to get the DVO timing entry
  169.          */
  170.  
  171.         int lfp_data_size =
  172.                 lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
  173.                 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
  174.         int dvo_timing_offset =
  175.                 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
  176.                 lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
  177.         char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index;
  178.  
  179.         return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
  180. }
  181.  
  182. /* get lvds_fp_timing entry
  183.  * this function may return NULL if the corresponding entry is invalid
  184.  */
  185. static const struct lvds_fp_timing *
  186. get_lvds_fp_timing(const struct bdb_header *bdb,
  187.                    const struct bdb_lvds_lfp_data *data,
  188.                    const struct bdb_lvds_lfp_data_ptrs *ptrs,
  189.                    int index)
  190. {
  191.         size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
  192.         u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
  193.         size_t ofs;
  194.  
  195.         if (index >= ARRAY_SIZE(ptrs->ptr))
  196.                 return NULL;
  197.         ofs = ptrs->ptr[index].fp_timing_offset;
  198.         if (ofs < data_ofs ||
  199.             ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
  200.                 return NULL;
  201.         return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
  202. }
  203.  
  204. /* Try to find integrated panel data */
  205. static void
  206. parse_lfp_panel_data(struct drm_i915_private *dev_priv,
  207.                             struct bdb_header *bdb)
  208. {
  209.         const struct bdb_lvds_options *lvds_options;
  210.         const struct bdb_lvds_lfp_data *lvds_lfp_data;
  211.         const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
  212.         const struct lvds_dvo_timing *panel_dvo_timing;
  213.         const struct lvds_fp_timing *fp_timing;
  214.         struct drm_display_mode *panel_fixed_mode;
  215.         int i, downclock, drrs_mode;
  216.  
  217.         lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
  218.         if (!lvds_options)
  219.                 return;
  220.  
  221.         dev_priv->vbt.lvds_dither = lvds_options->pixel_dither;
  222.         if (lvds_options->panel_type == 0xff)
  223.                 return;
  224.  
  225.         panel_type = lvds_options->panel_type;
  226.  
  227.         drrs_mode = (lvds_options->dps_panel_type_bits
  228.                                 >> (panel_type * 2)) & MODE_MASK;
  229.         /*
  230.          * VBT has static DRRS = 0 and seamless DRRS = 2.
  231.          * The below piece of code is required to adjust vbt.drrs_type
  232.          * to match the enum drrs_support_type.
  233.          */
  234.         switch (drrs_mode) {
  235.         case 0:
  236.                 dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT;
  237.                 DRM_DEBUG_KMS("DRRS supported mode is static\n");
  238.                 break;
  239.         case 2:
  240.                 dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT;
  241.                 DRM_DEBUG_KMS("DRRS supported mode is seamless\n");
  242.                 break;
  243.         default:
  244.                 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
  245.                 DRM_DEBUG_KMS("DRRS not supported (VBT input)\n");
  246.                 break;
  247.         }
  248.  
  249.         lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
  250.         if (!lvds_lfp_data)
  251.                 return;
  252.  
  253.         lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
  254.         if (!lvds_lfp_data_ptrs)
  255.                 return;
  256.  
  257.         dev_priv->vbt.lvds_vbt = 1;
  258.  
  259.         panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
  260.                                                lvds_lfp_data_ptrs,
  261.                                                lvds_options->panel_type);
  262.  
  263.         panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
  264.         if (!panel_fixed_mode)
  265.                 return;
  266.  
  267.         fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing);
  268.  
  269.         dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode;
  270.  
  271.         DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n");
  272.         drm_mode_debug_printmodeline(panel_fixed_mode);
  273.  
  274.         /*
  275.          * Iterate over the LVDS panel timing info to find the lowest clock
  276.          * for the native resolution.
  277.          */
  278.         downclock = panel_dvo_timing->clock;
  279.         for (i = 0; i < 16; i++) {
  280.                 const struct lvds_dvo_timing *dvo_timing;
  281.  
  282.                 dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
  283.                                                  lvds_lfp_data_ptrs,
  284.                                                  i);
  285.                 if (lvds_dvo_timing_equal_size(dvo_timing, panel_dvo_timing) &&
  286.                     dvo_timing->clock < downclock)
  287.                         downclock = dvo_timing->clock;
  288.         }
  289.  
  290.         if (downclock < panel_dvo_timing->clock && i915.lvds_downclock) {
  291.                 dev_priv->lvds_downclock_avail = 1;
  292.                 dev_priv->lvds_downclock = downclock * 10;
  293.                 DRM_DEBUG_KMS("LVDS downclock is found in VBT. "
  294.                               "Normal Clock %dKHz, downclock %dKHz\n",
  295.                               panel_fixed_mode->clock, 10*downclock);
  296.         }
  297.  
  298.         fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
  299.                                        lvds_lfp_data_ptrs,
  300.                                        lvds_options->panel_type);
  301.         if (fp_timing) {
  302.                 /* check the resolution, just to be sure */
  303.                 if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
  304.                     fp_timing->y_res == panel_fixed_mode->vdisplay) {
  305.                         dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val;
  306.                         DRM_DEBUG_KMS("VBT initial LVDS value %x\n",
  307.                                       dev_priv->vbt.bios_lvds_val);
  308.                 }
  309.         }
  310. }
  311.  
  312. static void
  313. parse_lfp_backlight(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
  314. {
  315.         const struct bdb_lfp_backlight_data *backlight_data;
  316.         const struct bdb_lfp_backlight_data_entry *entry;
  317.  
  318.         backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
  319.         if (!backlight_data)
  320.                 return;
  321.  
  322.         if (backlight_data->entry_size != sizeof(backlight_data->data[0])) {
  323.                 DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n",
  324.                               backlight_data->entry_size);
  325.                 return;
  326.         }
  327.  
  328.         entry = &backlight_data->data[panel_type];
  329.  
  330.         dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM;
  331.         if (!dev_priv->vbt.backlight.present) {
  332.                 DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n",
  333.                               entry->type);
  334.                 return;
  335.         }
  336.  
  337.         dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
  338.         dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm;
  339.         dev_priv->vbt.backlight.min_brightness = entry->min_brightness;
  340.         DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, "
  341.                       "active %s, min brightness %u, level %u\n",
  342.                       dev_priv->vbt.backlight.pwm_freq_hz,
  343.                       dev_priv->vbt.backlight.active_low_pwm ? "low" : "high",
  344.                       dev_priv->vbt.backlight.min_brightness,
  345.                       backlight_data->level[panel_type]);
  346. }
  347.  
  348. /* Try to find sdvo panel data */
  349. static void
  350. parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
  351.                       struct bdb_header *bdb)
  352. {
  353.         struct lvds_dvo_timing *dvo_timing;
  354.         struct drm_display_mode *panel_fixed_mode;
  355.         int index;
  356.  
  357.         index = i915.vbt_sdvo_panel_type;
  358.         if (index == -2) {
  359.                 DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
  360.                 return;
  361.         }
  362.  
  363.         if (index == -1) {
  364.                 struct bdb_sdvo_lvds_options *sdvo_lvds_options;
  365.  
  366.                 sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
  367.                 if (!sdvo_lvds_options)
  368.                         return;
  369.  
  370.                 index = sdvo_lvds_options->panel_type;
  371.         }
  372.  
  373.         dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
  374.         if (!dvo_timing)
  375.                 return;
  376.  
  377.         panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
  378.         if (!panel_fixed_mode)
  379.                 return;
  380.  
  381.         fill_detail_timing_data(panel_fixed_mode, dvo_timing + index);
  382.  
  383.         dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode;
  384.  
  385.         DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n");
  386.         drm_mode_debug_printmodeline(panel_fixed_mode);
  387. }
  388.  
  389. static int intel_bios_ssc_frequency(struct drm_device *dev,
  390.                                     bool alternate)
  391. {
  392.         switch (INTEL_INFO(dev)->gen) {
  393.         case 2:
  394.                 return alternate ? 66667 : 48000;
  395.         case 3:
  396.         case 4:
  397.                 return alternate ? 100000 : 96000;
  398.         default:
  399.                 return alternate ? 100000 : 120000;
  400.         }
  401. }
  402.  
  403. static void
  404. parse_general_features(struct drm_i915_private *dev_priv,
  405.                        struct bdb_header *bdb)
  406. {
  407.         struct drm_device *dev = dev_priv->dev;
  408.         struct bdb_general_features *general;
  409.  
  410.         general = find_section(bdb, BDB_GENERAL_FEATURES);
  411.         if (general) {
  412.                 dev_priv->vbt.int_tv_support = general->int_tv_support;
  413.                 dev_priv->vbt.int_crt_support = general->int_crt_support;
  414.                 dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
  415.                 dev_priv->vbt.lvds_ssc_freq =
  416.                         intel_bios_ssc_frequency(dev, general->ssc_freq);
  417.                 dev_priv->vbt.display_clock_mode = general->display_clock_mode;
  418.                 dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
  419.                 DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
  420.                               dev_priv->vbt.int_tv_support,
  421.                               dev_priv->vbt.int_crt_support,
  422.                               dev_priv->vbt.lvds_use_ssc,
  423.                               dev_priv->vbt.lvds_ssc_freq,
  424.                               dev_priv->vbt.display_clock_mode,
  425.                               dev_priv->vbt.fdi_rx_polarity_inverted);
  426.         }
  427. }
  428.  
  429. static void
  430. parse_general_definitions(struct drm_i915_private *dev_priv,
  431.                           struct bdb_header *bdb)
  432. {
  433.         struct bdb_general_definitions *general;
  434.  
  435.         general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
  436.         if (general) {
  437.                 u16 block_size = get_blocksize(general);
  438.                 if (block_size >= sizeof(*general)) {
  439.                         int bus_pin = general->crt_ddc_gmbus_pin;
  440.                         DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
  441.                         if (intel_gmbus_is_port_valid(bus_pin))
  442.                                 dev_priv->vbt.crt_ddc_pin = bus_pin;
  443.                 } else {
  444.                         DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
  445.                                   block_size);
  446.                 }
  447.         }
  448. }
  449.  
  450. static void
  451. parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
  452.                           struct bdb_header *bdb)
  453. {
  454.         struct sdvo_device_mapping *p_mapping;
  455.         struct bdb_general_definitions *p_defs;
  456.         union child_device_config *p_child;
  457.         int i, child_device_num, count;
  458.         u16     block_size;
  459.  
  460.         p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
  461.         if (!p_defs) {
  462.                 DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n");
  463.                 return;
  464.         }
  465.         /* judge whether the size of child device meets the requirements.
  466.          * If the child device size obtained from general definition block
  467.          * is different with sizeof(struct child_device_config), skip the
  468.          * parsing of sdvo device info
  469.          */
  470.         if (p_defs->child_dev_size != sizeof(*p_child)) {
  471.                 /* different child dev size . Ignore it */
  472.                 DRM_DEBUG_KMS("different child size is found. Invalid.\n");
  473.                 return;
  474.         }
  475.         /* get the block size of general definitions */
  476.         block_size = get_blocksize(p_defs);
  477.         /* get the number of child device */
  478.         child_device_num = (block_size - sizeof(*p_defs)) /
  479.                                 sizeof(*p_child);
  480.         count = 0;
  481.         for (i = 0; i < child_device_num; i++) {
  482.                 p_child = &(p_defs->devices[i]);
  483.                 if (!p_child->old.device_type) {
  484.                         /* skip the device block if device type is invalid */
  485.                         continue;
  486.                 }
  487.                 if (p_child->old.slave_addr != SLAVE_ADDR1 &&
  488.                         p_child->old.slave_addr != SLAVE_ADDR2) {
  489.                         /*
  490.                          * If the slave address is neither 0x70 nor 0x72,
  491.                          * it is not a SDVO device. Skip it.
  492.                          */
  493.                         continue;
  494.                 }
  495.                 if (p_child->old.dvo_port != DEVICE_PORT_DVOB &&
  496.                         p_child->old.dvo_port != DEVICE_PORT_DVOC) {
  497.                         /* skip the incorrect SDVO port */
  498.                         DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
  499.                         continue;
  500.                 }
  501.                 DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
  502.                                 " %s port\n",
  503.                                 p_child->old.slave_addr,
  504.                                 (p_child->old.dvo_port == DEVICE_PORT_DVOB) ?
  505.                                         "SDVOB" : "SDVOC");
  506.                 p_mapping = &(dev_priv->sdvo_mappings[p_child->old.dvo_port - 1]);
  507.                 if (!p_mapping->initialized) {
  508.                         p_mapping->dvo_port = p_child->old.dvo_port;
  509.                         p_mapping->slave_addr = p_child->old.slave_addr;
  510.                         p_mapping->dvo_wiring = p_child->old.dvo_wiring;
  511.                         p_mapping->ddc_pin = p_child->old.ddc_pin;
  512.                         p_mapping->i2c_pin = p_child->old.i2c_pin;
  513.                         p_mapping->initialized = 1;
  514.                         DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
  515.                                       p_mapping->dvo_port,
  516.                                       p_mapping->slave_addr,
  517.                                       p_mapping->dvo_wiring,
  518.                                       p_mapping->ddc_pin,
  519.                                       p_mapping->i2c_pin);
  520.                 } else {
  521.                         DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
  522.                                          "two SDVO device.\n");
  523.                 }
  524.                 if (p_child->old.slave2_addr) {
  525.                         /* Maybe this is a SDVO device with multiple inputs */
  526.                         /* And the mapping info is not added */
  527.                         DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
  528.                                 " is a SDVO device with multiple inputs.\n");
  529.                 }
  530.                 count++;
  531.         }
  532.  
  533.         if (!count) {
  534.                 /* No SDVO device info is found */
  535.                 DRM_DEBUG_KMS("No SDVO device info is found in VBT\n");
  536.         }
  537.         return;
  538. }
  539.  
  540. static void
  541. parse_driver_features(struct drm_i915_private *dev_priv,
  542.                        struct bdb_header *bdb)
  543. {
  544.         struct bdb_driver_features *driver;
  545.  
  546.         driver = find_section(bdb, BDB_DRIVER_FEATURES);
  547.         if (!driver)
  548.                 return;
  549.  
  550.         if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
  551.                 dev_priv->vbt.edp_support = 1;
  552.  
  553.         if (driver->dual_frequency)
  554.                 dev_priv->render_reclock_avail = true;
  555.  
  556.         DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled);
  557.         /*
  558.          * If DRRS is not supported, drrs_type has to be set to 0.
  559.          * This is because, VBT is configured in such a way that
  560.          * static DRRS is 0 and DRRS not supported is represented by
  561.          * driver->drrs_enabled=false
  562.          */
  563.         if (!driver->drrs_enabled)
  564.                 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
  565. }
  566.  
  567. static void
  568. parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
  569. {
  570.         struct bdb_edp *edp;
  571.         struct edp_power_seq *edp_pps;
  572.         struct edp_link_params *edp_link_params;
  573.  
  574.         edp = find_section(bdb, BDB_EDP);
  575.         if (!edp) {
  576.                 if (dev_priv->vbt.edp_support)
  577.                         DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
  578.                 return;
  579.         }
  580.  
  581.         switch ((edp->color_depth >> (panel_type * 2)) & 3) {
  582.         case EDP_18BPP:
  583.                 dev_priv->vbt.edp_bpp = 18;
  584.                 break;
  585.         case EDP_24BPP:
  586.                 dev_priv->vbt.edp_bpp = 24;
  587.                 break;
  588.         case EDP_30BPP:
  589.                 dev_priv->vbt.edp_bpp = 30;
  590.                 break;
  591.         }
  592.  
  593.         /* Get the eDP sequencing and link info */
  594.         edp_pps = &edp->power_seqs[panel_type];
  595.         edp_link_params = &edp->link_params[panel_type];
  596.  
  597.         dev_priv->vbt.edp_pps = *edp_pps;
  598.  
  599.         switch (edp_link_params->rate) {
  600.         case EDP_RATE_1_62:
  601.                 dev_priv->vbt.edp_rate = DP_LINK_BW_1_62;
  602.                 break;
  603.         case EDP_RATE_2_7:
  604.                 dev_priv->vbt.edp_rate = DP_LINK_BW_2_7;
  605.                 break;
  606.         default:
  607.                 DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n",
  608.                               edp_link_params->rate);
  609.                 break;
  610.         }
  611.  
  612.         switch (edp_link_params->lanes) {
  613.         case EDP_LANE_1:
  614.                 dev_priv->vbt.edp_lanes = 1;
  615.                 break;
  616.         case EDP_LANE_2:
  617.                 dev_priv->vbt.edp_lanes = 2;
  618.                 break;
  619.         case EDP_LANE_4:
  620.                 dev_priv->vbt.edp_lanes = 4;
  621.                 break;
  622.         default:
  623.                 DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n",
  624.                               edp_link_params->lanes);
  625.                 break;
  626.         }
  627.  
  628.         switch (edp_link_params->preemphasis) {
  629.         case EDP_PREEMPHASIS_NONE:
  630.                 dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
  631.                 break;
  632.         case EDP_PREEMPHASIS_3_5dB:
  633.                 dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
  634.                 break;
  635.         case EDP_PREEMPHASIS_6dB:
  636.                 dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
  637.                 break;
  638.         case EDP_PREEMPHASIS_9_5dB:
  639.                 dev_priv->vbt.edp_preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
  640.                 break;
  641.         default:
  642.                 DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n",
  643.                               edp_link_params->preemphasis);
  644.                 break;
  645.         }
  646.  
  647.         switch (edp_link_params->vswing) {
  648.         case EDP_VSWING_0_4V:
  649.                 dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_400;
  650.                 break;
  651.         case EDP_VSWING_0_6V:
  652.                 dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_600;
  653.                 break;
  654.         case EDP_VSWING_0_8V:
  655.                 dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_800;
  656.                 break;
  657.         case EDP_VSWING_1_2V:
  658.                 dev_priv->vbt.edp_vswing = DP_TRAIN_VOLTAGE_SWING_1200;
  659.                 break;
  660.         default:
  661.                 DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n",
  662.                               edp_link_params->vswing);
  663.                 break;
  664.         }
  665. }
  666.  
  667. static u8 *goto_next_sequence(u8 *data, int *size)
  668. {
  669.         u16 len;
  670.         int tmp = *size;
  671.  
  672.         if (--tmp < 0)
  673.                 return NULL;
  674.  
  675.         /* goto first element */
  676.         data++;
  677.         while (1) {
  678.                 switch (*data) {
  679.                 case MIPI_SEQ_ELEM_SEND_PKT:
  680.                         /*
  681.                          * skip by this element payload size
  682.                          * skip elem id, command flag and data type
  683.                          */
  684.                         tmp -= 5;
  685.                         if (tmp < 0)
  686.                                 return NULL;
  687.  
  688.                         data += 3;
  689.                         len = *((u16 *)data);
  690.  
  691.                         tmp -= len;
  692.                         if (tmp < 0)
  693.                                 return NULL;
  694.  
  695.                         /* skip by len */
  696.                         data = data + 2 + len;
  697.                         break;
  698.                 case MIPI_SEQ_ELEM_DELAY:
  699.                         /* skip by elem id, and delay is 4 bytes */
  700.                         tmp -= 5;
  701.                         if (tmp < 0)
  702.                                 return NULL;
  703.  
  704.                         data += 5;
  705.                         break;
  706.                 case MIPI_SEQ_ELEM_GPIO:
  707.                         tmp -= 3;
  708.                         if (tmp < 0)
  709.                                 return NULL;
  710.  
  711.                         data += 3;
  712.                         break;
  713.                 default:
  714.                         DRM_ERROR("Unknown element\n");
  715.                         return NULL;
  716.                 }
  717.  
  718.                 /* end of sequence ? */
  719.                 if (*data == 0)
  720.                         break;
  721.         }
  722.  
  723.         /* goto next sequence or end of block byte */
  724.         if (--tmp < 0)
  725.                 return NULL;
  726.  
  727.         data++;
  728.  
  729.         /* update amount of data left for the sequence block to be parsed */
  730.         *size = tmp;
  731.         return data;
  732. }
  733.  
  734. static void
  735. parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
  736. {
  737.         struct bdb_mipi_config *start;
  738.         struct bdb_mipi_sequence *sequence;
  739.         struct mipi_config *config;
  740.         struct mipi_pps_data *pps;
  741.         u8 *data, *seq_data;
  742.         int i, panel_id, seq_size;
  743.         u16 block_size;
  744.  
  745.         /* parse MIPI blocks only if LFP type is MIPI */
  746.         if (!dev_priv->vbt.has_mipi)
  747.                 return;
  748.  
  749.         /* Initialize this to undefined indicating no generic MIPI support */
  750.         dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
  751.  
  752.         /* Block #40 is already parsed and panel_fixed_mode is
  753.          * stored in dev_priv->lfp_lvds_vbt_mode
  754.          * resuse this when needed
  755.          */
  756.  
  757.         /* Parse #52 for panel index used from panel_type already
  758.          * parsed
  759.          */
  760.         start = find_section(bdb, BDB_MIPI_CONFIG);
  761.         if (!start) {
  762.                 DRM_DEBUG_KMS("No MIPI config BDB found");
  763.                 return;
  764.         }
  765.  
  766.         DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n",
  767.                                                                 panel_type);
  768.  
  769.         /*
  770.          * get hold of the correct configuration block and pps data as per
  771.          * the panel_type as index
  772.          */
  773.         config = &start->config[panel_type];
  774.         pps = &start->pps[panel_type];
  775.  
  776.         /* store as of now full data. Trim when we realise all is not needed */
  777.         dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL);
  778.         if (!dev_priv->vbt.dsi.config)
  779.                 return;
  780.  
  781.         dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL);
  782.         if (!dev_priv->vbt.dsi.pps) {
  783.                 kfree(dev_priv->vbt.dsi.config);
  784.                 return;
  785.         }
  786.  
  787.         /* We have mandatory mipi config blocks. Initialize as generic panel */
  788.         dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
  789.  
  790.         /* Check if we have sequence block as well */
  791.         sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
  792.         if (!sequence) {
  793.                 DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
  794.                 return;
  795.         }
  796.  
  797.         DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
  798.  
  799.         block_size = get_blocksize(sequence);
  800.  
  801.         /*
  802.          * parse the sequence block for individual sequences
  803.          */
  804.         dev_priv->vbt.dsi.seq_version = sequence->version;
  805.  
  806.         seq_data = &sequence->data[0];
  807.  
  808.         /*
  809.          * sequence block is variable length and hence we need to parse and
  810.          * get the sequence data for specific panel id
  811.          */
  812.         for (i = 0; i < MAX_MIPI_CONFIGURATIONS; i++) {
  813.                 panel_id = *seq_data;
  814.                 seq_size = *((u16 *) (seq_data + 1));
  815.                 if (panel_id == panel_type)
  816.                         break;
  817.  
  818.                 /* skip the sequence including seq header of 3 bytes */
  819.                 seq_data = seq_data + 3 + seq_size;
  820.                 if ((seq_data - &sequence->data[0]) > block_size) {
  821.                         DRM_ERROR("Sequence start is beyond sequence block size, corrupted sequence block\n");
  822.                         return;
  823.                 }
  824.         }
  825.  
  826.         if (i == MAX_MIPI_CONFIGURATIONS) {
  827.                 DRM_ERROR("Sequence block detected but no valid configuration\n");
  828.                 return;
  829.         }
  830.  
  831.         /* check if found sequence is completely within the sequence block
  832.          * just being paranoid */
  833.         if (seq_size > block_size) {
  834.                 DRM_ERROR("Corrupted sequence/size, bailing out\n");
  835.                 return;
  836.         }
  837.  
  838.         /* skip the panel id(1 byte) and seq size(2 bytes) */
  839.         dev_priv->vbt.dsi.data = kmemdup(seq_data + 3, seq_size, GFP_KERNEL);
  840.         if (!dev_priv->vbt.dsi.data)
  841.                 return;
  842.  
  843.         /*
  844.          * loop into the sequence data and split into multiple sequneces
  845.          * There are only 5 types of sequences as of now
  846.          */
  847.         data = dev_priv->vbt.dsi.data;
  848.         dev_priv->vbt.dsi.size = seq_size;
  849.  
  850.         /* two consecutive 0x00 indicate end of all sequences */
  851.         while (1) {
  852.                 int seq_id = *data;
  853.                 if (MIPI_SEQ_MAX > seq_id && seq_id > MIPI_SEQ_UNDEFINED) {
  854.                         dev_priv->vbt.dsi.sequence[seq_id] = data;
  855.                         DRM_DEBUG_DRIVER("Found mipi sequence - %d\n", seq_id);
  856.                 } else {
  857.                         DRM_ERROR("undefined sequence\n");
  858.                         goto err;
  859.                 }
  860.  
  861.                 /* partial parsing to skip elements */
  862.                 data = goto_next_sequence(data, &seq_size);
  863.  
  864.                 if (data == NULL) {
  865.                         DRM_ERROR("Sequence elements going beyond block itself. Sequence block parsing failed\n");
  866.                         goto err;
  867.                 }
  868.  
  869.                 if (*data == 0)
  870.                         break; /* end of sequence reached */
  871.         }
  872.  
  873.         DRM_DEBUG_DRIVER("MIPI related vbt parsing complete\n");
  874.         return;
  875. err:
  876.         kfree(dev_priv->vbt.dsi.data);
  877.         dev_priv->vbt.dsi.data = NULL;
  878.  
  879.         /* error during parsing so set all pointers to null
  880.          * because of partial parsing */
  881.         memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
  882. }
  883.  
  884. static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
  885.                            struct bdb_header *bdb)
  886. {
  887.         union child_device_config *it, *child = NULL;
  888.         struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
  889.         uint8_t hdmi_level_shift;
  890.         int i, j;
  891.         bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
  892.         uint8_t aux_channel;
  893.         /* Each DDI port can have more than one value on the "DVO Port" field,
  894.          * so look for all the possible values for each port and abort if more
  895.          * than one is found. */
  896.         int dvo_ports[][2] = {
  897.                 {DVO_PORT_HDMIA, DVO_PORT_DPA},
  898.                 {DVO_PORT_HDMIB, DVO_PORT_DPB},
  899.                 {DVO_PORT_HDMIC, DVO_PORT_DPC},
  900.                 {DVO_PORT_HDMID, DVO_PORT_DPD},
  901.                 {DVO_PORT_CRT, -1 /* Port E can only be DVO_PORT_CRT */ },
  902.         };
  903.  
  904.         /* Find the child device to use, abort if more than one found. */
  905.         for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
  906.                 it = dev_priv->vbt.child_dev + i;
  907.  
  908.                 for (j = 0; j < 2; j++) {
  909.                         if (dvo_ports[port][j] == -1)
  910.                                 break;
  911.  
  912.                         if (it->common.dvo_port == dvo_ports[port][j]) {
  913.                                 if (child) {
  914.                                         DRM_DEBUG_KMS("More than one child device for port %c in VBT.\n",
  915.                                                       port_name(port));
  916.                                         return;
  917.                                 }
  918.                                 child = it;
  919.                         }
  920.                 }
  921.         }
  922.         if (!child)
  923.                 return;
  924.  
  925.         aux_channel = child->raw[25];
  926.  
  927.         is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
  928.         is_dp = child->common.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
  929.         is_crt = child->common.device_type & DEVICE_TYPE_ANALOG_OUTPUT;
  930.         is_hdmi = is_dvi && (child->common.device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0;
  931.         is_edp = is_dp && (child->common.device_type & DEVICE_TYPE_INTERNAL_CONNECTOR);
  932.  
  933.         info->supports_dvi = is_dvi;
  934.         info->supports_hdmi = is_hdmi;
  935.         info->supports_dp = is_dp;
  936.  
  937.         DRM_DEBUG_KMS("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d\n",
  938.                       port_name(port), is_dp, is_hdmi, is_dvi, is_edp, is_crt);
  939.  
  940.         if (is_edp && is_dvi)
  941.                 DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n",
  942.                               port_name(port));
  943.         if (is_crt && port != PORT_E)
  944.                 DRM_DEBUG_KMS("Port %c is analog\n", port_name(port));
  945.         if (is_crt && (is_dvi || is_dp))
  946.                 DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
  947.                               port_name(port));
  948.         if (is_dvi && (port == PORT_A || port == PORT_E))
  949.                 DRM_DEBUG_KMS("Port %c is TMDS compabile\n", port_name(port));
  950.         if (!is_dvi && !is_dp && !is_crt)
  951.                 DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
  952.                               port_name(port));
  953.         if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E))
  954.                 DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
  955.  
  956.         if (is_dvi) {
  957.                 if (child->common.ddc_pin == 0x05 && port != PORT_B)
  958.                         DRM_DEBUG_KMS("Unexpected DDC pin for port B\n");
  959.                 if (child->common.ddc_pin == 0x04 && port != PORT_C)
  960.                         DRM_DEBUG_KMS("Unexpected DDC pin for port C\n");
  961.                 if (child->common.ddc_pin == 0x06 && port != PORT_D)
  962.                         DRM_DEBUG_KMS("Unexpected DDC pin for port D\n");
  963.         }
  964.  
  965.         if (is_dp) {
  966.                 if (aux_channel == 0x40 && port != PORT_A)
  967.                         DRM_DEBUG_KMS("Unexpected AUX channel for port A\n");
  968.                 if (aux_channel == 0x10 && port != PORT_B)
  969.                         DRM_DEBUG_KMS("Unexpected AUX channel for port B\n");
  970.                 if (aux_channel == 0x20 && port != PORT_C)
  971.                         DRM_DEBUG_KMS("Unexpected AUX channel for port C\n");
  972.                 if (aux_channel == 0x30 && port != PORT_D)
  973.                         DRM_DEBUG_KMS("Unexpected AUX channel for port D\n");
  974.         }
  975.  
  976.         if (bdb->version >= 158) {
  977.                 /* The VBT HDMI level shift values match the table we have. */
  978.                 hdmi_level_shift = child->raw[7] & 0xF;
  979.                 if (hdmi_level_shift < 0xC) {
  980.                         DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n",
  981.                                       port_name(port),
  982.                                       hdmi_level_shift);
  983.                         info->hdmi_level_shift = hdmi_level_shift;
  984.                 }
  985.         }
  986. }
  987.  
  988. static void parse_ddi_ports(struct drm_i915_private *dev_priv,
  989.                             struct bdb_header *bdb)
  990. {
  991.         struct drm_device *dev = dev_priv->dev;
  992.         enum port port;
  993.  
  994.         if (!HAS_DDI(dev))
  995.                 return;
  996.  
  997.         if (!dev_priv->vbt.child_dev_num)
  998.                 return;
  999.  
  1000.         if (bdb->version < 155)
  1001.                 return;
  1002.  
  1003.         for (port = PORT_A; port < I915_MAX_PORTS; port++)
  1004.                 parse_ddi_port(dev_priv, port, bdb);
  1005. }
  1006.  
  1007. static void
  1008. parse_device_mapping(struct drm_i915_private *dev_priv,
  1009.                        struct bdb_header *bdb)
  1010. {
  1011.         struct bdb_general_definitions *p_defs;
  1012.         union child_device_config *p_child, *child_dev_ptr;
  1013.         int i, child_device_num, count;
  1014.         u16     block_size;
  1015.  
  1016.         p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
  1017.         if (!p_defs) {
  1018.                 DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
  1019.                 return;
  1020.         }
  1021.         /* judge whether the size of child device meets the requirements.
  1022.          * If the child device size obtained from general definition block
  1023.          * is different with sizeof(struct child_device_config), skip the
  1024.          * parsing of sdvo device info
  1025.          */
  1026.         if (p_defs->child_dev_size != sizeof(*p_child)) {
  1027.                 /* different child dev size . Ignore it */
  1028.                 DRM_DEBUG_KMS("different child size is found. Invalid.\n");
  1029.                 return;
  1030.         }
  1031.         /* get the block size of general definitions */
  1032.         block_size = get_blocksize(p_defs);
  1033.         /* get the number of child device */
  1034.         child_device_num = (block_size - sizeof(*p_defs)) /
  1035.                                 sizeof(*p_child);
  1036.         count = 0;
  1037.         /* get the number of child device that is present */
  1038.         for (i = 0; i < child_device_num; i++) {
  1039.                 p_child = &(p_defs->devices[i]);
  1040.                 if (!p_child->common.device_type) {
  1041.                         /* skip the device block if device type is invalid */
  1042.                         continue;
  1043.                 }
  1044.                 count++;
  1045.         }
  1046.         if (!count) {
  1047.                 DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
  1048.                 return;
  1049.         }
  1050.         dev_priv->vbt.child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL);
  1051.         if (!dev_priv->vbt.child_dev) {
  1052.                 DRM_DEBUG_KMS("No memory space for child device\n");
  1053.                 return;
  1054.         }
  1055.  
  1056.         dev_priv->vbt.child_dev_num = count;
  1057.         count = 0;
  1058.         for (i = 0; i < child_device_num; i++) {
  1059.                 p_child = &(p_defs->devices[i]);
  1060.                 if (!p_child->common.device_type) {
  1061.                         /* skip the device block if device type is invalid */
  1062.                         continue;
  1063.                 }
  1064.  
  1065.                 if (p_child->common.dvo_port >= DVO_PORT_MIPIA
  1066.                     && p_child->common.dvo_port <= DVO_PORT_MIPID
  1067.                     &&p_child->common.device_type & DEVICE_TYPE_MIPI_OUTPUT) {
  1068.                         DRM_DEBUG_KMS("Found MIPI as LFP\n");
  1069.                         dev_priv->vbt.has_mipi = 1;
  1070.                         dev_priv->vbt.dsi.port = p_child->common.dvo_port;
  1071.                 }
  1072.  
  1073.                 child_dev_ptr = dev_priv->vbt.child_dev + count;
  1074.                 count++;
  1075.                 memcpy((void *)child_dev_ptr, (void *)p_child,
  1076.                                         sizeof(*p_child));
  1077.         }
  1078.         return;
  1079. }
  1080.  
  1081. static void
  1082. init_vbt_defaults(struct drm_i915_private *dev_priv)
  1083. {
  1084.         struct drm_device *dev = dev_priv->dev;
  1085.         enum port port;
  1086.  
  1087.         dev_priv->vbt.crt_ddc_pin = GMBUS_PORT_VGADDC;
  1088.  
  1089.         /* Default to having backlight */
  1090.         dev_priv->vbt.backlight.present = true;
  1091.  
  1092.         /* LFP panel data */
  1093.         dev_priv->vbt.lvds_dither = 1;
  1094.         dev_priv->vbt.lvds_vbt = 0;
  1095.  
  1096.         /* SDVO panel data */
  1097.         dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
  1098.  
  1099.         /* general features */
  1100.         dev_priv->vbt.int_tv_support = 1;
  1101.         dev_priv->vbt.int_crt_support = 1;
  1102.  
  1103.         /* Default to using SSC */
  1104.         dev_priv->vbt.lvds_use_ssc = 1;
  1105.         /*
  1106.          * Core/SandyBridge/IvyBridge use alternative (120MHz) reference
  1107.          * clock for LVDS.
  1108.          */
  1109.         dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev,
  1110.                         !HAS_PCH_SPLIT(dev));
  1111.         DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq);
  1112.  
  1113.         for (port = PORT_A; port < I915_MAX_PORTS; port++) {
  1114.                 struct ddi_vbt_port_info *info =
  1115.                         &dev_priv->vbt.ddi_port_info[port];
  1116.  
  1117.                 /* Recommended BSpec default: 800mV 0dB. */
  1118.                 info->hdmi_level_shift = 6;
  1119.  
  1120.                 info->supports_dvi = (port != PORT_A && port != PORT_E);
  1121.                 info->supports_hdmi = info->supports_dvi;
  1122.                 info->supports_dp = (port != PORT_E);
  1123.         }
  1124. }
  1125.  
  1126. static int intel_no_opregion_vbt_callback(const struct dmi_system_id *id)
  1127. {
  1128.         DRM_DEBUG_KMS("Falling back to manually reading VBT from "
  1129.                       "VBIOS ROM for %s\n",
  1130.                       id->ident);
  1131.         return 1;
  1132. }
  1133.  
  1134. static const struct dmi_system_id intel_no_opregion_vbt[] = {
  1135.         {
  1136.                 .callback = intel_no_opregion_vbt_callback,
  1137.                 .ident = "ThinkCentre A57",
  1138.                 .matches = {
  1139.                         DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
  1140.                         DMI_MATCH(DMI_PRODUCT_NAME, "97027RG"),
  1141.                 },
  1142.         },
  1143.         { }
  1144. };
  1145.  
  1146. static struct bdb_header *validate_vbt(char *base, size_t size,
  1147.                                        struct vbt_header *vbt,
  1148.                                        const char *source)
  1149. {
  1150.         size_t offset;
  1151.         struct bdb_header *bdb;
  1152.  
  1153.         if (vbt == NULL) {
  1154.                 DRM_DEBUG_DRIVER("VBT signature missing\n");
  1155.                 return NULL;
  1156.         }
  1157.  
  1158.         offset = (char *)vbt - base;
  1159.         if (offset + sizeof(struct vbt_header) > size) {
  1160.                 DRM_DEBUG_DRIVER("VBT header incomplete\n");
  1161.                 return NULL;
  1162.         }
  1163.  
  1164.         if (memcmp(vbt->signature, "$VBT", 4)) {
  1165.                 DRM_DEBUG_DRIVER("VBT invalid signature\n");
  1166.                 return NULL;
  1167.         }
  1168.  
  1169.         offset += vbt->bdb_offset;
  1170.         if (offset + sizeof(struct bdb_header) > size) {
  1171.                 DRM_DEBUG_DRIVER("BDB header incomplete\n");
  1172.                 return NULL;
  1173.         }
  1174.  
  1175.         bdb = (struct bdb_header *)(base + offset);
  1176.         if (offset + bdb->bdb_size > size) {
  1177.                 DRM_DEBUG_DRIVER("BDB incomplete\n");
  1178.                 return NULL;
  1179.         }
  1180.  
  1181.         DRM_DEBUG_KMS("Using VBT from %s: %20s\n",
  1182.                       source, vbt->signature);
  1183.         return bdb;
  1184. }
  1185.  
  1186. /**
  1187.  * intel_parse_bios - find VBT and initialize settings from the BIOS
  1188.  * @dev: DRM device
  1189.  *
  1190.  * Loads the Video BIOS and checks that the VBT exists.  Sets scratch registers
  1191.  * to appropriate values.
  1192.  *
  1193.  * Returns 0 on success, nonzero on failure.
  1194.  */
  1195. int
  1196. intel_parse_bios(struct drm_device *dev)
  1197. {
  1198.         struct drm_i915_private *dev_priv = dev->dev_private;
  1199.         struct pci_dev *pdev = dev->pdev;
  1200.         struct bdb_header *bdb = NULL;
  1201.         u8 __iomem *bios = NULL;
  1202.  
  1203.         if (HAS_PCH_NOP(dev))
  1204.                 return -ENODEV;
  1205.  
  1206.         init_vbt_defaults(dev_priv);
  1207.  
  1208.         /* XXX Should this validation be moved to intel_opregion.c? */
  1209.         if (!dmi_check_system(intel_no_opregion_vbt) && dev_priv->opregion.vbt)
  1210.                 bdb = validate_vbt((char *)dev_priv->opregion.header, OPREGION_SIZE,
  1211.                                    (struct vbt_header *)dev_priv->opregion.vbt,
  1212.                                    "OpRegion");
  1213.  
  1214.         if (bdb == NULL) {
  1215.                 size_t i, size;
  1216.  
  1217.                 bios = pci_map_rom(pdev, &size);
  1218.                 if (!bios)
  1219.                         return -1;
  1220.  
  1221.                 /* Scour memory looking for the VBT signature */
  1222.                 for (i = 0; i + 4 < size; i++) {
  1223.                         if (memcmp(bios + i, "$VBT", 4) == 0) {
  1224.                                 bdb = validate_vbt(bios, size,
  1225.                                                    (struct vbt_header *)(bios + i),
  1226.                                                    "PCI ROM");
  1227.                                 break;
  1228.                         }
  1229.                 }
  1230.  
  1231.                 if (!bdb) {
  1232.                         pci_unmap_rom(pdev, bios);
  1233.                         return -1;
  1234.                 }
  1235.         }
  1236.  
  1237.         /* Grab useful general definitions */
  1238.         parse_general_features(dev_priv, bdb);
  1239.         parse_general_definitions(dev_priv, bdb);
  1240.         parse_lfp_panel_data(dev_priv, bdb);
  1241.         parse_lfp_backlight(dev_priv, bdb);
  1242.         parse_sdvo_panel_data(dev_priv, bdb);
  1243.         parse_sdvo_device_mapping(dev_priv, bdb);
  1244.         parse_device_mapping(dev_priv, bdb);
  1245.         parse_driver_features(dev_priv, bdb);
  1246.         parse_edp(dev_priv, bdb);
  1247.         parse_mipi(dev_priv, bdb);
  1248.         parse_ddi_ports(dev_priv, bdb);
  1249.  
  1250.         if (bios)
  1251.                 pci_unmap_rom(pdev, bios);
  1252.  
  1253.         return 0;
  1254. }
  1255.  
  1256. /* Ensure that vital registers have been initialised, even if the BIOS
  1257.  * is absent or just failing to do its job.
  1258.  */
  1259. void intel_setup_bios(struct drm_device *dev)
  1260. {
  1261.         struct drm_i915_private *dev_priv = dev->dev_private;
  1262.  
  1263.          /* Set the Panel Power On/Off timings if uninitialized. */
  1264.         if (!HAS_PCH_SPLIT(dev) &&
  1265.             I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
  1266.                 /* Set T2 to 40ms and T5 to 200ms */
  1267.                 I915_WRITE(PP_ON_DELAYS, 0x019007d0);
  1268.  
  1269.                 /* Set T3 to 35ms and Tx to 200ms */
  1270.                 I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
  1271.         }
  1272. }
  1273.