/*
* Copyright © 2015 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
/**
* DOC: atomic modeset support
*
* The functions here implement the state management and hardware programming
* dispatch required by the atomic modeset infrastructure.
* See intel_atomic_plane.c for the plane-specific atomic functionality.
*/
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include "intel_drv.h"
/**
* intel_connector_atomic_get_property - fetch connector property value
* @connector: connector to fetch property for
* @state: state containing the property value
* @property: property to look up
* @val: pointer to write property value into
*
* The DRM core does not store shadow copies of properties for
* atomic-capable drivers. This entrypoint is used to fetch
* the current value of a driver-specific connector property.
*/
int
intel_connector_atomic_get_property(struct drm_connector *connector,
const struct drm_connector_state *state,
struct drm_property *property,
uint64_t *val)
{
int i;
/*
* TODO: We only have atomic modeset for planes at the moment, so the
* crtc/connector code isn't quite ready yet. Until it's ready,
* continue to look up all property values in the DRM's shadow copy
* in obj->properties->values[].
*
* When the crtc/connector state work matures, this function should
* be updated to read the values out of the state structure instead.
*/
for (i = 0; i < connector->base.properties->count; i++) {
if (connector->base.properties->properties[i] == property) {
*val = connector->base.properties->values[i];
return 0;
}
}
return -EINVAL;
}
/*
* intel_crtc_duplicate_state - duplicate crtc state
* @crtc: drm crtc
*
* Allocates and returns a copy of the crtc state (both common and
* Intel-specific) for the specified crtc.
*
* Returns: The newly allocated crtc state, or NULL on failure.
*/
struct drm_crtc_state *
intel_crtc_duplicate_state(struct drm_crtc *crtc)
{
struct intel_crtc_state *crtc_state;
crtc_state = kmemdup(crtc->state, sizeof(*crtc_state), GFP_KERNEL);
if (!crtc_state)
return NULL;
__drm_atomic_helper_crtc_duplicate_state(crtc, &crtc_state->base);
crtc_state->update_pipe = false;
crtc_state->disable_lp_wm = false;
crtc_state->disable_cxsr = false;
crtc_state->update_wm_pre = false;
crtc_state->update_wm_post = false;
crtc_state->fb_changed = false;
return &crtc_state->base;
}
/**
* intel_crtc_destroy_state - destroy crtc state
* @crtc: drm crtc
*
* Destroys the crtc state (both common and Intel-specific) for the
* specified crtc.
*/
void
intel_crtc_destroy_state(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
drm_atomic_helper_crtc_destroy_state(crtc, state);
}
/**
* intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
* @dev: DRM device
* @crtc: intel crtc
* @crtc_state: incoming crtc_state to validate and setup scalers
*
* This function sets up scalers based on staged scaling requests for
* a @crtc and its planes. It is called from crtc level check path. If request
* is a supportable request, it attaches scalers to requested planes and crtc.
*
* This function takes into account the current scaler(s) in use by any planes
* not being part of this atomic state
*
* Returns:
* 0 - scalers were setup succesfully
* error code - otherwise
*/
int intel_atomic_setup_scalers(struct drm_device *dev,
struct intel_crtc *intel_crtc,
struct intel_crtc_state *crtc_state)
{
struct drm_plane *plane = NULL;
struct intel_plane *intel_plane;
struct intel_plane_state *plane_state = NULL;
struct intel_crtc_scaler_state *scaler_state =
&crtc_state->scaler_state;
struct drm_atomic_state *drm_state = crtc_state->base.state;
int num_scalers_need;
int i, j;
num_scalers_need = hweight32(scaler_state->scaler_users);
/*
* High level flow:
* - staged scaler requests are already in scaler_state->scaler_users
* - check whether staged scaling requests can be supported
* - add planes using scalers that aren't in current transaction
* - assign scalers to requested users
* - as part of plane commit, scalers will be committed
* (i.e., either attached or detached) to respective planes in hw
* - as part of crtc_commit, scaler will be either attached or detached
* to crtc in hw
*/
/* fail if required scalers > available scalers */
if (num_scalers_need > intel_crtc->num_scalers){
DRM_DEBUG_KMS("Too many scaling requests %d > %d\n",
num_scalers_need, intel_crtc->num_scalers);
return -EINVAL;
}
/* walkthrough scaler_users bits and start assigning scalers */
for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
int *scaler_id;
const char *name;
int idx;
/* skip if scaler not required */
if (!(scaler_state->scaler_users & (1 << i)))
continue;
if (i == SKL_CRTC_INDEX) {
name = "CRTC";
idx = intel_crtc->base.base.id;
/* panel fitter case: assign as a crtc scaler */
scaler_id = &scaler_state->scaler_id;
} else {
name = "PLANE";
/* plane scaler case: assign as a plane scaler */
/* find the plane that set the bit as scaler_user */
plane = drm_state->planes[i];
/*
* to enable/disable hq mode, add planes that are using scaler
* into this transaction
*/
if (!plane) {
struct drm_plane_state *state;
plane = drm_plane_from_index(dev, i);
state = drm_atomic_get_plane_state(drm_state, plane);
if (IS_ERR(state)) {
DRM_DEBUG_KMS("Failed to add [PLANE:%d] to drm_state\n",
plane->base.id);
return PTR_ERR(state);
}
/*
* the plane is added after plane checks are run,
* but since this plane is unchanged just do the
* minimum required validation.
*/
crtc_state->base.planes_changed = true;
}
intel_plane = to_intel_plane(plane);
idx = plane->base.id;
/* plane on different crtc cannot be a scaler user of this crtc */
if (WARN_ON(intel_plane->pipe != intel_crtc->pipe)) {
continue;
}
plane_state = to_intel_plane_state(drm_state->plane_states[i]);
scaler_id = &plane_state->scaler_id;
}
if (*scaler_id < 0) {
/* find a free scaler */
for (j = 0; j < intel_crtc->num_scalers; j++) {
if (!scaler_state->scalers[j].in_use) {
scaler_state->scalers[j].in_use = 1;
*scaler_id = j;
DRM_DEBUG_KMS("Attached scaler id %u.%u to %s:%d\n",
intel_crtc->pipe, *scaler_id, name, idx);
break;
}
}
}
if (WARN_ON(*scaler_id < 0)) {
DRM_DEBUG_KMS("Cannot find scaler for %s:%d\n", name, idx);
continue;
}
/* set scaler mode */
if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
/*
* when only 1 scaler is in use on either pipe A or B,
* scaler 0 operates in high quality (HQ) mode.
* In this case use scaler 0 to take advantage of HQ mode
*/
*scaler_id = 0;
scaler_state->scalers[0].in_use = 1;
scaler_state->scalers[0].mode = PS_SCALER_MODE_HQ;
scaler_state->scalers[1].in_use = 0;
} else {
scaler_state->scalers[*scaler_id].mode = PS_SCALER_MODE_DYN;
}
}
return 0;
}
static void
intel_atomic_duplicate_dpll_state(struct drm_i915_private *dev_priv,
struct intel_shared_dpll_config *shared_dpll)
{
enum intel_dpll_id i;
/* Copy shared dpll state */
for (i = 0; i < dev_priv->num_shared_dpll; i++) {
struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
shared_dpll[i] = pll->config;
}
}
struct intel_shared_dpll_config *
intel_atomic_get_shared_dpll_state(struct drm_atomic_state *s)
{
struct intel_atomic_state *state = to_intel_atomic_state(s);
WARN_ON(!drm_modeset_is_locked(&s->dev->mode_config.connection_mutex));
if (!state->dpll_set) {
state->dpll_set = true;
intel_atomic_duplicate_dpll_state(to_i915(s->dev),
state->shared_dpll);
}
return state->shared_dpll;
}
struct drm_atomic_state *
intel_atomic_state_alloc(struct drm_device *dev)
{
struct intel_atomic_state *state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state || drm_atomic_state_init(dev, &state->base) < 0) {
kfree(state);
return NULL;
}
return &state->base;
}
void intel_atomic_state_clear(struct drm_atomic_state *s)
{
struct intel_atomic_state *state = to_intel_atomic_state(s);
drm_atomic_state_default_clear(&state->base);
state->dpll_set = state->modeset = false;
}