Subversion Repositories Kolibri OS

Rev

Rev 5527 | Rev 7250 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | Download | RSS feed

  1. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  2. ;;                                                                 ;;
  3. ;; Copyright (C) KolibriOS team 2004-2015. All rights reserved.    ;;
  4. ;; Distributed under terms of the GNU General Public License       ;;
  5. ;;                                                                 ;;
  6. ;;  i8254x driver for KolibriOS                                    ;;
  7. ;;                                                                 ;;
  8. ;;  based on i8254x.asm from baremetal os                          ;;
  9. ;;                                                                 ;;
  10. ;;    Written by hidnplayr (hidnplayr@gmail.com)                   ;;
  11. ;;                                                                 ;;
  12. ;;          GNU GENERAL PUBLIC LICENSE                             ;;
  13. ;;             Version 2, June 1991                                ;;
  14. ;;                                                                 ;;
  15. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  16.  
  17. format PE DLL native
  18. entry START
  19.  
  20.         CURRENT_API             = 0x0200
  21.         COMPATIBLE_API          = 0x0100
  22.         API_VERSION             = (COMPATIBLE_API shl 16) + CURRENT_API
  23.  
  24.         MAX_DEVICES             = 16
  25.  
  26.         __DEBUG__               = 1
  27.         __DEBUG_LEVEL__         = 2             ; 1 = verbose, 2 = errors only
  28.  
  29.         MAX_PKT_SIZE            = 1514          ; Maximum packet size
  30.  
  31.         RX_RING_SIZE            = 8             ; Must be a power of 2, and minimum 8
  32.         TX_RING_SIZE            = 8             ; Must be a power of 2, and minimum 8
  33.  
  34. section '.flat' readable writable executable
  35.  
  36. include '../proc32.inc'
  37. include '../struct.inc'
  38. include '../macros.inc'
  39. include '../fdo.inc'
  40. include '../netdrv.inc'
  41.  
  42. ; Register list
  43. REG_CTRL                = 0x0000 ; Control Register
  44. REG_STATUS              = 0x0008 ; Device Status Register
  45. REG_CTRLEXT             = 0x0018 ; Extended Control Register
  46. REG_MDIC                = 0x0020 ; MDI Control Register
  47. REG_FCAL                = 0x0028 ; Flow Control Address Low
  48. REG_FCAH                = 0x002C ; Flow Control Address High
  49. REG_FCT                 = 0x0030 ; Flow Control Type
  50. REG_VET                 = 0x0038 ; VLAN Ether Type
  51. REG_ICR                 = 0x00C0 ; Interrupt Cause Read
  52. REG_ITR                 = 0x00C4 ; Interrupt Throttling Register
  53. REG_ICS                 = 0x00C8 ; Interrupt Cause Set Register
  54. REG_IMS                 = 0x00D0 ; Interrupt Mask Set/Read Register
  55. REG_IMC                 = 0x00D8 ; Interrupt Mask Clear Register
  56. REG_RCTL                = 0x0100 ; Receive Control Register
  57. REG_FCTTV               = 0x0170 ; Flow Control Transmit Timer Value
  58. REG_TXCW                = 0x0178 ; Transmit Configuration Word
  59. REG_RXCW                = 0x0180 ; Receive Configuration Word
  60. REG_TCTL                = 0x0400 ; Transmit Control Register
  61. REG_TIPG                = 0x0410 ; Transmit Inter Packet Gap
  62.  
  63. REG_LEDCTL              = 0x0E00 ; LED Control
  64. REG_PBA                 = 0x1000 ; Packet Buffer Allocation
  65.  
  66. REG_RDBAL               = 0x2800 ; RX Descriptor Base Address Low
  67. REG_RDBAH               = 0x2804 ; RX Descriptor Base Address High
  68. REG_RDLEN               = 0x2808 ; RX Descriptor Length
  69. REG_RDH                 = 0x2810 ; RX Descriptor Head
  70. REG_RDT                 = 0x2818 ; RX Descriptor Tail
  71. REG_RDTR                = 0x2820 ; RX Delay Timer Register
  72. REG_RXDCTL              = 0x3828 ; RX Descriptor Control
  73. REG_RADV                = 0x282C ; RX Int. Absolute Delay Timer
  74. REG_RSRPD               = 0x2C00 ; RX Small Packet Detect Interrupt
  75.  
  76. REG_TXDMAC              = 0x3000 ; TX DMA Control
  77. REG_TDBAL               = 0x3800 ; TX Descriptor Base Address Low
  78. REG_TDBAH               = 0x3804 ; TX Descriptor Base Address High
  79. REG_TDLEN               = 0x3808 ; TX Descriptor Length
  80. REG_TDH                 = 0x3810 ; TX Descriptor Head
  81. REG_TDT                 = 0x3818 ; TX Descriptor Tail
  82. REG_TIDV                = 0x3820 ; TX Interrupt Delay Value
  83. REG_TXDCTL              = 0x3828 ; TX Descriptor Control
  84. REG_TADV                = 0x382C ; TX Absolute Interrupt Delay Value
  85. REG_TSPMT               = 0x3830 ; TCP Segmentation Pad & Min Threshold
  86.  
  87. REG_RXCSUM              = 0x5000 ; RX Checksum Control
  88.  
  89. ; Register list for i8254x
  90. I82542_REG_RDTR         = 0x0108 ; RX Delay Timer Register
  91. I82542_REG_RDBAL        = 0x0110 ; RX Descriptor Base Address Low
  92. I82542_REG_RDBAH        = 0x0114 ; RX Descriptor Base Address High
  93. I82542_REG_RDLEN        = 0x0118 ; RX Descriptor Length
  94. I82542_REG_RDH          = 0x0120 ; RDH for i82542
  95. I82542_REG_RDT          = 0x0128 ; RDT for i82542
  96. I82542_REG_TDBAL        = 0x0420 ; TX Descriptor Base Address Low
  97. I82542_REG_TDBAH        = 0x0424 ; TX Descriptor Base Address Low
  98. I82542_REG_TDLEN        = 0x0428 ; TX Descriptor Length
  99. I82542_REG_TDH          = 0x0430 ; TDH for i82542
  100. I82542_REG_TDT          = 0x0438 ; TDT for i82542
  101.  
  102. ; CTRL - Control Register (0x0000)
  103. CTRL_FD                 = 0x00000001 ; Full Duplex
  104. CTRL_LRST               = 0x00000008 ; Link Reset
  105. CTRL_ASDE               = 0x00000020 ; Auto-speed detection
  106. CTRL_SLU                = 0x00000040 ; Set Link Up
  107. CTRL_ILOS               = 0x00000080 ; Invert Loss of Signal
  108. CTRL_SPEED_MASK         = 0x00000300 ; Speed selection
  109. CTRL_SPEED_SHIFT        = 8
  110. CTRL_FRCSPD             = 0x00000800 ; Force Speed
  111. CTRL_FRCDPLX            = 0x00001000 ; Force Duplex
  112. CTRL_SDP0_DATA          = 0x00040000 ; SDP0 data
  113. CTRL_SDP1_DATA          = 0x00080000 ; SDP1 data
  114. CTRL_SDP0_IODIR         = 0x00400000 ; SDP0 direction
  115. CTRL_SDP1_IODIR         = 0x00800000 ; SDP1 direction
  116. CTRL_RST                = 0x04000000 ; Device Reset
  117. CTRL_RFCE               = 0x08000000 ; RX Flow Ctrl Enable
  118. CTRL_TFCE               = 0x10000000 ; TX Flow Ctrl Enable
  119. CTRL_VME                = 0x40000000 ; VLAN Mode Enable
  120. CTRL_PHY_RST            = 0x80000000 ; PHY reset
  121.  
  122. ; STATUS - Device Status Register (0x0008)
  123. STATUS_FD               = 0x00000001 ; Full Duplex
  124. STATUS_LU               = 0x00000002 ; Link Up
  125. STATUS_TXOFF            = 0x00000010 ; Transmit paused
  126. STATUS_TBIMODE          = 0x00000020 ; TBI Mode
  127. STATUS_SPEED_MASK       = 0x000000C0 ; Link Speed setting
  128. STATUS_SPEED_SHIFT      = 6
  129. STATUS_ASDV_MASK        = 0x00000300 ; Auto Speed Detection
  130. STATUS_ASDV_SHIFT       = 8
  131. STATUS_PCI66            = 0x00000800 ; PCI bus speed
  132. STATUS_BUS64            = 0x00001000 ; PCI bus width
  133. STATUS_PCIX_MODE        = 0x00002000 ; PCI-X mode
  134. STATUS_PCIXSPD_MASK     = 0x0000C000 ; PCI-X speed
  135. STATUS_PCIXSPD_SHIFT    = 14
  136.  
  137. ; CTRL_EXT - Extended Device Control Register (0x0018)
  138. CTRLEXT_PHY_INT         = 0x00000020 ; PHY interrupt
  139. CTRLEXT_SDP6_DATA       = 0x00000040 ; SDP6 data
  140. CTRLEXT_SDP7_DATA       = 0x00000080 ; SDP7 data
  141. CTRLEXT_SDP6_IODIR      = 0x00000400 ; SDP6 direction
  142. CTRLEXT_SDP7_IODIR      = 0x00000800 ; SDP7 direction
  143. CTRLEXT_ASDCHK          = 0x00001000 ; Auto-Speed Detect Chk
  144. CTRLEXT_EE_RST          = 0x00002000 ; EEPROM reset
  145. CTRLEXT_SPD_BYPS        = 0x00008000 ; Speed Select Bypass
  146. CTRLEXT_RO_DIS          = 0x00020000 ; Relaxed Ordering Dis.
  147. CTRLEXT_LNKMOD_MASK     = 0x00C00000 ; Link Mode
  148. CTRLEXT_LNKMOD_SHIFT    = 22
  149.  
  150. ; MDIC - MDI Control Register (0x0020)
  151. MDIC_DATA_MASK          = 0x0000FFFF ; Data
  152. MDIC_REG_MASK           = 0x001F0000 ; PHY Register
  153. MDIC_REG_SHIFT          = 16
  154. MDIC_PHY_MASK           = 0x03E00000 ; PHY Address
  155. MDIC_PHY_SHIFT          = 21
  156. MDIC_OP_MASK            = 0x0C000000 ; Opcode
  157. MDIC_OP_SHIFT           = 26
  158. MDIC_R                  = 0x10000000 ; Ready
  159. MDIC_I                  = 0x20000000 ; Interrupt Enable
  160. MDIC_E                  = 0x40000000 ; Error
  161.  
  162. ; ICR - Interrupt Cause Read (0x00c0)
  163. ICR_TXDW                = 0x00000001 ; TX Desc Written back
  164. ICR_TXQE                = 0x00000002 ; TX Queue Empty
  165. ICR_LSC                 = 0x00000004 ; Link Status Change
  166. ICR_RXSEQ               = 0x00000008 ; RX Sence Error
  167. ICR_RXDMT0              = 0x00000010 ; RX Desc min threshold reached
  168. ICR_RXO                 = 0x00000040 ; RX Overrun
  169. ICR_RXT0                = 0x00000080 ; RX Timer Interrupt
  170. ICR_MDAC                = 0x00000200 ; MDIO Access Complete
  171. ICR_RXCFG               = 0x00000400
  172. ICR_PHY_INT             = 0x00001000 ; PHY Interrupt
  173. ICR_GPI_SDP6            = 0x00002000 ; GPI on SDP6
  174. ICR_GPI_SDP7            = 0x00004000 ; GPI on SDP7
  175. ICR_TXD_LOW             = 0x00008000 ; TX Desc low threshold hit
  176. ICR_SRPD                = 0x00010000 ; Small RX packet detected
  177.  
  178. ; RCTL - Receive Control Register (0x0100)
  179. RCTL_EN                 = 0x00000002 ; Receiver Enable
  180. RCTL_SBP                = 0x00000004 ; Store Bad Packets
  181. RCTL_UPE                = 0x00000008 ; Unicast Promiscuous Enabled
  182. RCTL_MPE                = 0x00000010 ; Xcast Promiscuous Enabled
  183. RCTL_LPE                = 0x00000020 ; Long Packet Reception Enable
  184. RCTL_LBM_MASK           = 0x000000C0 ; Loopback Mode
  185. RCTL_LBM_SHIFT          = 6
  186. RCTL_RDMTS_MASK         = 0x00000300 ; RX Desc Min Threshold Size
  187. RCTL_RDMTS_SHIFT        = 8
  188. RCTL_MO_MASK            = 0x00003000 ; Multicast Offset
  189. RCTL_MO_SHIFT           = 12
  190. RCTL_BAM                = 0x00008000 ; Broadcast Accept Mode
  191. RCTL_BSIZE_MASK         = 0x00030000 ; RX Buffer Size
  192. RCTL_BSIZE_SHIFT        = 16
  193. RCTL_VFE                = 0x00040000 ; VLAN Filter Enable
  194. RCTL_CFIEN              = 0x00080000 ; CFI Enable
  195. RCTL_CFI                = 0x00100000 ; Canonical Form Indicator Bit
  196. RCTL_DPF                = 0x00400000 ; Discard Pause Frames
  197. RCTL_PMCF               = 0x00800000 ; Pass MAC Control Frames
  198. RCTL_BSEX               = 0x02000000 ; Buffer Size Extension
  199. RCTL_SECRC              = 0x04000000 ; Strip Ethernet CRC
  200.  
  201. ; TCTL - Transmit Control Register (0x0400)
  202. TCTL_EN                 = 0x00000002 ; Transmit Enable
  203. TCTL_PSP                = 0x00000008 ; Pad short packets
  204. TCTL_SWXOFF             = 0x00400000 ; Software XOFF Transmission
  205.  
  206. ; PBA - Packet Buffer Allocation (0x1000)
  207. PBA_RXA_MASK            = 0x0000FFFF ; RX Packet Buffer
  208. PBA_RXA_SHIFT           = 0
  209. PBA_TXA_MASK            = 0xFFFF0000 ; TX Packet Buffer
  210. PBA_TXA_SHIFT           = 16
  211.  
  212. ; Flow Control Type
  213. FCT_TYPE_DEFAULT        = 0x8808
  214.  
  215.  
  216.  
  217. ; === TX Descriptor ===
  218.  
  219. struct TDESC
  220.         addr_l          dd ?
  221.         addr_h          dd ?
  222.         length_cso_cmd  dd ?    ; 16 bits length + 8 bits cso + 8 bits cmd
  223.         status          dd ?    ; status, checksum start field, special
  224. ends
  225.  
  226. ; TX Packet Length (word 2)
  227. TXDESC_LEN_MASK         = 0x0000ffff
  228.  
  229. ; TX Descriptor CMD field (word 2)
  230. TXDESC_IDE              = 0x80000000 ; Interrupt Delay Enable
  231. TXDESC_VLE              = 0x40000000 ; VLAN Packet Enable
  232. TXDESC_DEXT             = 0x20000000 ; Extension
  233. TXDESC_RPS              = 0x10000000 ; Report Packet Sent
  234. TXDESC_RS               = 0x08000000 ; Report Status
  235. TXDESC_IC               = 0x04000000 ; Insert Checksum
  236. TXDESC_IFCS             = 0x02000000 ; Insert FCS
  237. TXDESC_EOP              = 0x01000000 ; End Of Packet
  238.  
  239. ; TX Descriptor STA field (word 3)
  240. TXDESC_TU               = 0x00000008 ; Transmit Underrun
  241. TXDESC_LC               = 0x00000004 ; Late Collision
  242. TXDESC_EC               = 0x00000002 ; Excess Collisions
  243. TXDESC_DD               = 0x00000001 ; Descriptor Done
  244.  
  245.  
  246.  
  247. ; === RX Descriptor ===
  248.  
  249. struct RDESC
  250.         addr_l          dd ?
  251.         addr_h          dd ?
  252.         status_l        dd ?
  253.         status_h        dd ?
  254. ends
  255.  
  256. ; RX Packet Length (word 2)
  257. RXDESC_LEN_MASK         = 0x0000ffff
  258.  
  259. ; RX Descriptor STA field (word 3)
  260. RXDESC_PIF              = 0x00000080 ; Passed In-exact Filter
  261. RXDESC_IPCS             = 0x00000040 ; IP cksum calculated
  262. RXDESC_TCPCS            = 0x00000020 ; TCP cksum calculated
  263. RXDESC_VP               = 0x00000008 ; Packet is 802.1Q
  264. RXDESC_IXSM             = 0x00000004 ; Ignore cksum indication
  265. RXDESC_EOP              = 0x00000002 ; End Of Packet
  266. RXDESC_DD               = 0x00000001 ; Descriptor Done
  267.  
  268. struct  device          ETH_DEVICE
  269.  
  270.         mmio_addr       dd ?
  271.         pci_bus         dd ?
  272.         pci_dev         dd ?
  273.         irq_line        db ?
  274.  
  275.         cur_rx          dd ?
  276.         cur_tx          dd ?
  277.         last_tx         dd ?
  278.  
  279.         rb 0x100 - ($ and 0xff) ; align 256
  280.         rx_desc         rb RX_RING_SIZE*sizeof.RDESC*2
  281.  
  282.         rb 0x100 - ($ and 0xff) ; align 256
  283.         tx_desc         rb TX_RING_SIZE*sizeof.TDESC*2
  284.  
  285. ends
  286.  
  287. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  288. ;;                        ;;
  289. ;; proc START             ;;
  290. ;;                        ;;
  291. ;; (standard driver proc) ;;
  292. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  293.  
  294. proc START c, reason:dword, cmdline:dword
  295.  
  296.         cmp     [reason], DRV_ENTRY
  297.         jne     .fail
  298.  
  299.         DEBUGF  1,"Loading driver\n"
  300.         invoke  RegService, my_service, service_proc
  301.         ret
  302.  
  303.   .fail:
  304.         xor     eax, eax
  305.         ret
  306.  
  307. endp
  308.  
  309.  
  310. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  311. ;;                        ;;
  312. ;; proc SERVICE_PROC      ;;
  313. ;;                        ;;
  314. ;; (standard driver proc) ;;
  315. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  316.  
  317. align 4
  318. proc service_proc stdcall, ioctl:dword
  319.  
  320.         mov     edx, [ioctl]
  321.         mov     eax, [edx + IOCTL.io_code]
  322.  
  323. ;------------------------------------------------------
  324.  
  325.         cmp     eax, 0 ;SRV_GETVERSION
  326.         jne     @F
  327.  
  328.         cmp     [edx + IOCTL.out_size], 4
  329.         jb      .fail
  330.         mov     eax, [edx + IOCTL.output]
  331.         mov     dword[eax], API_VERSION
  332.  
  333.         xor     eax, eax
  334.         ret
  335.  
  336. ;------------------------------------------------------
  337.   @@:
  338.         cmp     eax, 1 ;SRV_HOOK
  339.         jne     .fail
  340.  
  341.         cmp     [edx + IOCTL.inp_size], 3               ; Data input must be at least 3 bytes
  342.         jb      .fail
  343.  
  344.         mov     eax, [edx + IOCTL.input]
  345.         cmp     byte[eax], 1                            ; 1 means device number and bus number (pci) are given
  346.         jne     .fail                                   ; other types arent supported for this card yet
  347.  
  348. ; check if the device is already listed
  349.  
  350.         mov     esi, device_list
  351.         mov     ecx, [devices]
  352.         test    ecx, ecx
  353.         jz      .firstdevice
  354.  
  355. ;        mov     eax, [edx + IOCTL.input]                ; get the pci bus and device numbers
  356.         mov     ax, [eax+1]                             ;
  357.   .nextdevice:
  358.         mov     ebx, [esi]
  359.         cmp     al, byte[ebx + device.pci_bus]
  360.         jne     .next
  361.         cmp     ah, byte[ebx + device.pci_dev]
  362.         je      .find_devicenum                         ; Device is already loaded, let's find it's device number
  363.   .next:
  364.         add     esi, 4
  365.         loop    .nextdevice
  366.  
  367.  
  368. ; This device doesnt have its own eth_device structure yet, lets create one
  369.   .firstdevice:
  370.         cmp     [devices], MAX_DEVICES                  ; First check if the driver can handle one more card
  371.         jae     .fail
  372.  
  373.         allocate_and_clear ebx, sizeof.device, .fail    ; Allocate the buffer for device structure
  374.  
  375. ; Fill in the direct call addresses into the struct
  376.  
  377.         mov     [ebx + device.reset], reset
  378.         mov     [ebx + device.transmit], transmit
  379.         mov     [ebx + device.unload], unload
  380.         mov     [ebx + device.name], my_service
  381.  
  382. ; save the pci bus and device numbers
  383.  
  384.         mov     eax, [edx + IOCTL.input]
  385.         movzx   ecx, byte[eax+1]
  386.         mov     [ebx + device.pci_bus], ecx
  387.         movzx   ecx, byte[eax+2]
  388.         mov     [ebx + device.pci_dev], ecx
  389.  
  390. ; Now, it's time to find the base mmio addres of the PCI device
  391.  
  392.         stdcall PCI_find_mmio32, [ebx + device.pci_bus], [ebx + device.pci_dev] ; returns in eax
  393.  
  394. ; Create virtual mapping of the physical memory
  395.  
  396.         invoke  MapIoMem, eax, 10000h, PG_SW+PG_NOCACHE
  397.         mov     [ebx + device.mmio_addr], eax
  398.  
  399. ; We've found the mmio address, find IRQ now
  400.  
  401.         invoke  PciRead8, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.interrupt_line
  402.         mov     [ebx + device.irq_line], al
  403.  
  404.         DEBUGF  1,"Hooking into device, dev:%x, bus:%x, irq:%x, addr:%x\n",\
  405.         [ebx + device.pci_dev]:1,[ebx + device.pci_bus]:1,[ebx + device.irq_line]:1,[ebx + device.mmio_addr]:8
  406.  
  407. ; Ok, the eth_device structure is ready, let's probe the device
  408.         call    probe                                   ; this function will output in eax
  409.         test    eax, eax
  410.         jnz     .err                                    ; If an error occured, exit
  411.  
  412.         mov     eax, [devices]                          ; Add the device structure to our device list
  413.         mov     [device_list+4*eax], ebx                ; (IRQ handler uses this list to find device)
  414.         inc     [devices]                               ;
  415.  
  416.         call    start_i8254x
  417.         test    eax, eax
  418.         jnz     .destroy
  419.  
  420.         mov     [ebx + device.type], NET_TYPE_ETH
  421.         invoke  NetRegDev
  422.         cmp     eax, -1
  423.         je      .destroy
  424.  
  425.         ret
  426.  
  427. ; If the device was already loaded, find the device number and return it in eax
  428.  
  429.   .find_devicenum:
  430.         DEBUGF  1,"Trying to find device number of already registered device\n"
  431.         invoke  NetPtrToNum                             ; This kernel procedure converts a pointer to device struct in ebx
  432.                                                         ; into a device number in edi
  433.         mov     eax, edi                                ; Application wants it in eax instead
  434.         DEBUGF  1,"Kernel says: %u\n", eax
  435.         ret
  436.  
  437. ; If an error occured, remove all allocated data and exit (returning -1 in eax)
  438.  
  439.   .destroy:
  440.         ; todo: reset device into virgin state
  441.  
  442.   .err:
  443.         invoke  KernelFree, ebx
  444.  
  445.   .fail:
  446.         DEBUGF  2,"Loading driver failed\n"
  447.         or      eax, -1
  448.         ret
  449.  
  450. ;------------------------------------------------------
  451. endp
  452.  
  453.  
  454. ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
  455. ;;                                                                        ;;
  456. ;;        Actual Hardware dependent code starts here                      ;;
  457. ;;                                                                        ;;
  458. ;;/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\;;
  459.  
  460.  
  461. align 4
  462. unload:
  463.  
  464.         DEBUGF  1,"Unload\n"
  465.  
  466.         ; TODO: (in this particular order)
  467.         ;
  468.         ; - Stop the device
  469.         ; - Detach int handler
  470.         ; - Remove device from local list (device_list)
  471.         ; - call unregister function in kernel
  472.         ; - Remove all allocated structures and buffers the card used
  473.  
  474.         or      eax, -1
  475.         ret
  476.  
  477.  
  478.  
  479. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  480. ;;
  481. ;;  probe: enables the device (if it really is I8254X)
  482. ;;
  483. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  484. align 4
  485. probe:
  486.  
  487.         DEBUGF  1,"Probe\n"
  488.  
  489. ; Make the device a bus master
  490.         invoke  PciRead32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command
  491.         or      al, PCI_CMD_MASTER
  492.         invoke  PciWrite32, [ebx + device.pci_bus], [ebx + device.pci_dev], PCI_header00.command, eax
  493.  
  494.         ; TODO: validate the device
  495.  
  496.         call    read_mac
  497.  
  498.         movzx   eax, [ebx + device.irq_line]
  499.         DEBUGF  1,"Attaching int handler to irq %x\n", eax:1
  500.         invoke  AttachIntHandler, eax, int_handler, ebx
  501.         test    eax, eax
  502.         jnz     @f
  503.         DEBUGF  2,"Could not attach int handler!\n"
  504.         or      eax, -1
  505.         ret
  506.   @@:
  507.  
  508.  
  509. reset_dontstart:
  510.         DEBUGF  1,"Reset\n"
  511.  
  512.         mov     esi, [ebx + device.mmio_addr]
  513.  
  514.         or      dword[esi + REG_CTRL], CTRL_RST         ; reset device
  515.   .loop:
  516.         push    esi
  517.         xor     esi, esi
  518.         inc     esi
  519.         invoke  Sleep
  520.         pop     esi
  521.         test    dword[esi + REG_CTRL], CTRL_RST
  522.         jnz     .loop
  523.  
  524.         mov     dword[esi + REG_IMC], 0xffffffff        ; Disable all interrupt causes
  525.         mov     eax, dword [esi + REG_ICR]              ; Clear any pending interrupts
  526.         mov     dword[esi + REG_ITR], 0                 ; Disable interrupt throttling logic
  527.  
  528.         mov     dword[esi + REG_PBA], 0x00000004        ; PBA: set the RX buffer size to 4KB (TX buffer is calculated as 64-RX buffer)
  529.         mov     dword[esi + REG_RDTR], 0                ; RDTR: set no delay
  530.  
  531.         mov     dword[esi + REG_TXCW], 0x80008060       ; TXCW: set ANE, TxConfigWord (Half/Full duplex, Next Page Reqest)
  532.  
  533.         mov     eax, [esi + REG_CTRL]
  534.         or      eax, 1 shl 6 + 1 shl 5
  535.         and     eax, not (1 shl 3 + 1 shl 7 + 1 shl 30 + 1 shl 31)
  536.         mov     dword [esi + REG_CTRL], eax             ; CTRL: clear LRST, set SLU and ASDE, clear RSTPHY, VME, and ILOS
  537.  
  538.         lea     edi, [esi + 0x5200]                     ; MTA: reset
  539.         mov     eax, 0xffffffff
  540.         stosd
  541.         stosd
  542.         stosd
  543.         stosd
  544.  
  545.         call    init_rx
  546.         test    eax, eax
  547.         jnz     .fail
  548.         call    init_tx
  549.  
  550.         xor     eax, eax
  551.   .fail:
  552.         ret
  553.  
  554.  
  555.  
  556. align 4
  557. init_rx:
  558.  
  559.         lea     edi, [ebx + device.rx_desc]
  560.         mov     ecx, RX_RING_SIZE
  561.   .loop:
  562.         push    ecx
  563.         push    edi
  564.         invoke  NetAlloc, MAX_PKT_SIZE+NET_BUFF.data
  565.         test    eax, eax
  566.         jz      .out_of_mem
  567.         DEBUGF  1,"RX buffer: 0x%x\n", eax
  568.         pop     edi
  569.         mov     dword[edi + RX_RING_SIZE*sizeof.RDESC], eax
  570.         push    edi
  571.         invoke  GetPhysAddr
  572.         pop     edi
  573.         add     eax, NET_BUFF.data
  574.         mov     [edi + RDESC.addr_l], eax
  575.         mov     [edi + RDESC.addr_h], 0
  576.         mov     [edi + RDESC.status_l], 0
  577.         mov     [edi + RDESC.status_h], 0
  578.         add     edi, sizeof.RDESC
  579.         pop     ecx
  580.         dec     ecx
  581.         jnz     .loop
  582.  
  583.         mov     [ebx + device.cur_rx], 0
  584.  
  585.         lea     eax, [ebx + device.rx_desc]
  586.         invoke  GetPhysAddr
  587.         mov     dword[esi + REG_RDBAL], eax                             ; Receive Descriptor Base Address Low
  588.         mov     dword[esi + REG_RDBAH], 0                               ; Receive Descriptor Base Address High
  589.         mov     dword[esi + REG_RDLEN], RX_RING_SIZE*sizeof.RDESC       ; Receive Descriptor Length
  590.         mov     dword[esi + REG_RDH], 0                                 ; Receive Descriptor Head
  591.         mov     dword[esi + REG_RDT], RX_RING_SIZE-1                    ; Receive Descriptor Tail
  592.         mov     dword[esi + REG_RCTL], RCTL_SBP or RCTL_BAM or RCTL_SECRC or RCTL_UPE or RCTL_MPE
  593.         ; Store Bad Packets, Broadcast Accept Mode, Strip Ethernet CRC from incoming packet, Promiscuous mode
  594.         xor     eax, eax        ; success!
  595.         ret
  596.  
  597.   .out_of_mem:
  598.         DEBUGF  2,"Out of memory!\n"
  599.         pop     edi ecx
  600.         or      eax, -1         ; error!
  601.         ret
  602.  
  603.  
  604.  
  605. align 4
  606. init_tx:
  607.  
  608.         lea     edi, [ebx + device.tx_desc]
  609.         mov     ecx, TX_RING_SIZE
  610.   .loop:
  611.         mov     [edi + TDESC.addr_l], eax
  612.         mov     [edi + TDESC.addr_h], 0
  613.         mov     [edi + TDESC.length_cso_cmd], 0
  614.         mov     [edi + TDESC.status], 0
  615.         add     edi, sizeof.TDESC
  616.         dec     ecx
  617.         jnz     .loop
  618.  
  619.         mov     [ebx + device.cur_tx], 0
  620.         mov     [ebx + device.last_tx], 0
  621.  
  622.         lea     eax, [ebx + device.tx_desc]
  623.         invoke  GetPhysAddr
  624.         mov     dword[esi + REG_TDBAL], eax                             ; Transmit Descriptor Base Address Low
  625.         mov     dword[esi + REG_TDBAH], 0                               ; Transmit Descriptor Base Address High
  626.         mov     dword[esi + REG_TDLEN], RX_RING_SIZE*sizeof.TDESC       ; Transmit Descriptor Length
  627.         mov     dword[esi + REG_TDH], 0                                 ; Transmit Descriptor Head
  628.         mov     dword[esi + REG_TDT], 0                                 ; Transmit Descriptor Tail
  629.         mov     dword[esi + REG_TCTL], 0x010400fa                       ; Enabled, Pad Short Packets, 15 retrys, 64-byte COLD, Re-transmit on Late Collision
  630.         mov     dword[esi + REG_TIPG], 0x0060200A                       ; IPGT 10, IPGR1 8, IPGR2 6
  631.  
  632.         ret
  633.  
  634.  
  635. align 4
  636. reset:
  637.         call    reset_dontstart
  638.         test    eax, eax
  639.         je      start_i8254x
  640.  
  641.         ret
  642.  
  643. align 4
  644. start_i8254x:
  645.  
  646.         mov     esi, [ebx + device.mmio_addr]
  647.         or      dword[esi + REG_RCTL], RCTL_EN          ; Enable the receiver
  648.  
  649.         xor     eax, eax
  650.         mov     [esi + REG_RDTR], eax                   ; Clear the Receive Delay Timer Register
  651.         mov     [esi + REG_RADV], eax                   ; Clear the Receive Interrupt Absolute Delay Timer
  652.         mov     [esi + REG_RSRPD], eax                  ; Clear the Receive Small Packet Detect Interrupt
  653.  
  654.         mov     dword[esi + REG_IMS], 0x1F6DC           ; Enable interrupt types
  655.         mov     eax, [esi + REG_ICR]                    ; Clear pending interrupts
  656.  
  657.         mov     [ebx + device.mtu], 1514
  658.         call    link_status
  659.  
  660.         xor     eax, eax
  661.         ret
  662.  
  663.  
  664.  
  665.  
  666. align 4
  667. read_mac:
  668.  
  669.         DEBUGF  1,"Read MAC\n"
  670.  
  671.         mov     esi, [ebx + device.mmio_addr]
  672.  
  673.         mov     eax, [esi+0x5400]                       ; RAL
  674.         test    eax, eax
  675.         jz      .try_eeprom
  676.  
  677.         mov     dword[ebx + device.mac], eax
  678.         mov     eax, [esi+0x5404]                       ; RAH
  679.         mov     word[ebx + device.mac+4], ax
  680.  
  681.         jmp     .mac_ok
  682.  
  683.   .try_eeprom:
  684.         mov     dword[esi+0x14], 0x00000001
  685.         mov     eax, [esi+0x14]
  686.         shr     eax, 16
  687.         mov     word[ebx + device.mac], ax
  688.  
  689.         mov     dword[esi+0x14], 0x00000101
  690.         mov     eax, [esi+0x14]
  691.         shr     eax, 16
  692.         mov     word[ebx + device.mac+2], ax
  693.  
  694.         mov     dword[esi+0x14], 0x00000201
  695.         mov     eax, [esi+0x14]
  696.         shr     eax, 16
  697.         mov     word[ebx + device.mac+4], ax
  698.  
  699.   .mac_ok:
  700.         DEBUGF  1,"MAC = %x-%x-%x-%x-%x-%x\n",\
  701.         [ebx + device.mac+0]:2,[ebx + device.mac+1]:2,[ebx + device.mac+2]:2,\
  702.         [ebx + device.mac+3]:2,[ebx + device.mac+4]:2,[ebx + device.mac+5]:2
  703.  
  704.         ret
  705.  
  706.  
  707. link_status:
  708.  
  709.         DEBUGF  1,"Verifying link status\n"
  710.  
  711.         xor     ecx, ecx                        ; ETH_LINK_DOWN
  712.         mov     esi, [ebx + device.mmio_addr]
  713.         mov     eax, [esi + REG_STATUS]
  714.         test    eax, STATUS_LU
  715.         jz      .ok
  716.  
  717.         test    eax, STATUS_FD
  718.         jz      @f
  719.         or      cl, ETH_LINK_FD
  720.   @@:
  721.         shr     eax, STATUS_SPEED_SHIFT
  722.         and     al, 3
  723.         test    al, al
  724.         jnz     @f
  725.         or      cl, ETH_LINK_10M
  726.         jmp     .ok
  727.   @@:
  728.         cmp     al, 1
  729.         jne     @f
  730.         or      cl, ETH_LINK_100M
  731.         jmp     .ok
  732.   @@:
  733.         or      cl, ETH_LINK_1G
  734. ;        jmp     .ok
  735.  
  736.   .ok:
  737.         mov     [ebx + device.state], ecx
  738.         invoke  NetLinkChanged
  739.         ret
  740.  
  741.  
  742. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  743. ;;                                         ;;
  744. ;; Transmit                                ;;
  745. ;;                                         ;;
  746. ;; In:  ebx = pointer to device structure  ;;
  747. ;; Out: eax = 0 on success                 ;;
  748. ;;                                         ;;
  749. ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
  750.  
  751. proc transmit stdcall bufferptr
  752.  
  753.         pushf
  754.         cli
  755.  
  756.         mov     esi, [bufferptr]
  757.         DEBUGF  1,"Transmitting packet, buffer:%x, size:%u\n", [bufferptr], [esi + NET_BUFF.length]
  758.         lea     eax, [esi + NET_BUFF.data]
  759.         DEBUGF  1,"To: %x-%x-%x-%x-%x-%x From: %x-%x-%x-%x-%x-%x Type:%x%x\n",\
  760.         [eax+00]:2,[eax+01]:2,[eax+02]:2,[eax+03]:2,[eax+04]:2,[eax+05]:2,\
  761.         [eax+06]:2,[eax+07]:2,[eax+08]:2,[eax+09]:2,[eax+10]:2,[eax+11]:2,\
  762.         [eax+13]:2,[eax+12]:2
  763.  
  764.         cmp     [esi + NET_BUFF.length], 1514
  765.         ja      .fail
  766.         cmp     [esi + NET_BUFF.length], 60
  767.         jb      .fail
  768.  
  769. ; Program the descriptor (use legacy mode)
  770.         mov     edi, [ebx + device.cur_tx]
  771.         DEBUGF  1, "Using TX desc: %u\n", edi
  772.         shl     edi, 4                                          ; edi = edi * sizeof.TDESC
  773.         lea     edi, [ebx + device.tx_desc + edi]
  774.         mov     eax, esi
  775.         mov     dword[edi + TX_RING_SIZE*sizeof.TDESC], eax     ; Store the data location (for driver)
  776.         add     eax, [eax + NET_BUFF.offset]
  777.         invoke  GetPhysAddr
  778.         mov     [edi + TDESC.addr_l], eax                       ; Data location (for hardware)
  779.         mov     [edi + TDESC.addr_h], 0
  780.  
  781.         mov     ecx, [esi + NET_BUFF.length]
  782.         or      ecx, TXDESC_EOP + TXDESC_IFCS + TXDESC_RS
  783.         mov     [edi + TDESC.length_cso_cmd], ecx
  784.         mov     [edi + TDESC.status], 0
  785.  
  786. ; Tell i8254x wich descriptor(s) we programmed, by moving the tail
  787.         mov     edi, [ebx + device.mmio_addr]
  788.         mov     eax, [ebx + device.cur_tx]
  789.         inc     eax
  790.         and     eax, TX_RING_SIZE-1
  791.         mov     [ebx + device.cur_tx], eax
  792.         mov     dword[edi + REG_TDT], eax                        ; TDT - Transmit Descriptor Tail
  793.  
  794. ; Update stats
  795.         inc     [ebx + device.packets_tx]
  796.         mov     eax, [esi + NET_BUFF.length]
  797.         add     dword[ebx + device.bytes_tx], eax
  798.         adc     dword[ebx + device.bytes_tx + 4], 0
  799.  
  800.         call    clean_tx
  801.  
  802.         popf
  803.         xor     eax, eax
  804.         ret
  805.  
  806.   .fail:
  807.         call    clean_tx
  808.  
  809.         DEBUGF  2,"Send failed\n"
  810.         invoke  NetFree, [bufferptr]
  811.         popf
  812.         or      eax, -1
  813.         ret
  814.  
  815. endp
  816.  
  817.  
  818. ;;;;;;;;;;;;;;;;;;;;;;;
  819. ;;                   ;;
  820. ;; Interrupt handler ;;
  821. ;;                   ;;
  822. ;;;;;;;;;;;;;;;;;;;;;;;
  823.  
  824. align 4
  825. int_handler:
  826.  
  827.         push    ebx esi edi
  828.  
  829.         DEBUGF  1,"INT\n"
  830. ;-------------------------------------------
  831. ; Find pointer of device wich made IRQ occur
  832.  
  833.         mov     ecx, [devices]
  834.         test    ecx, ecx
  835.         jz      .nothing
  836.         mov     esi, device_list
  837.   .nextdevice:
  838.         mov     ebx, [esi]
  839.         mov     edi, [ebx + device.mmio_addr]
  840.         mov     eax, [edi + REG_ICR]
  841.         test    eax, eax
  842.         jnz     .got_it
  843.   .continue:
  844.         add     esi, 4
  845.         dec     ecx
  846.         jnz     .nextdevice
  847.   .nothing:
  848.         pop     edi esi ebx
  849.         xor     eax, eax
  850.  
  851.         ret
  852.  
  853.   .got_it:
  854.         DEBUGF  1,"Device: %x Status: %x\n", ebx, eax
  855.  
  856. ;---------
  857. ; RX done?
  858.  
  859.         test    eax, ICR_RXDMT0 + ICR_RXT0
  860.         jz      .no_rx
  861.  
  862.         push    eax ebx
  863.   .retaddr:
  864.         pop     ebx eax
  865. ; Get last descriptor addr
  866.         mov     esi, [ebx + device.cur_rx]
  867.         shl     esi, 4                                  ; esi = esi * sizeof.RDESC
  868.         lea     esi, [ebx + device.rx_desc + esi]
  869.         cmp     byte[esi + RDESC.status_h], 0           ; Check status field
  870.         je      .no_rx
  871.  
  872.         push    eax ebx
  873.         push    .retaddr
  874.         movzx   ecx, word[esi + 8]                      ; Get the packet length
  875.         DEBUGF  1,"got %u bytes\n", ecx
  876.         mov     eax, [esi + RX_RING_SIZE*sizeof.RDESC]  ; Get packet pointer
  877.         push    eax
  878.         mov     [eax + NET_BUFF.length], ecx
  879.         mov     [eax + NET_BUFF.device], ebx
  880.         mov     [eax + NET_BUFF.offset], NET_BUFF.data
  881.  
  882. ; Update stats
  883.         add     dword[ebx + device.bytes_rx], ecx
  884.         adc     dword[ebx + device.bytes_rx + 4], 0
  885.         inc     [ebx + device.packets_rx]
  886.  
  887. ; Allocate new descriptor
  888.         push    esi
  889.         invoke  NetAlloc, MAX_PKT_SIZE+NET_BUFF.data
  890.         pop     esi
  891.         test    eax, eax
  892.         jz      .out_of_mem
  893.         mov     dword[esi + RX_RING_SIZE*sizeof.RDESC], eax
  894.         invoke  GetPhysAddr
  895.         add     eax, NET_BUFF.data
  896.         mov     [esi + RDESC.addr_l], eax
  897.         mov     [esi + RDESC.status_l], 0
  898.         mov     [esi + RDESC.status_h], 0
  899.  
  900. ; Move the receive descriptor tail
  901.         mov     esi, [ebx + device.mmio_addr]
  902.         mov     eax, [ebx + device.cur_rx]
  903.         mov     [esi + REG_RDT], eax
  904.  
  905. ; Move to next rx desc
  906.         inc     [ebx + device.cur_rx]
  907.         and     [ebx + device.cur_rx], RX_RING_SIZE-1
  908.  
  909.         jmp     [EthInput]
  910.  
  911.   .out_of_mem:
  912.         DEBUGF  2,"Out of memory!\n"
  913.  
  914. ; Move to next rx desc
  915.         inc     [ebx + device.cur_rx]
  916.         and     [ebx + device.cur_rx], RX_RING_SIZE-1
  917.  
  918.         jmp     [EthInput]
  919.   .no_rx:
  920.  
  921. ;--------------
  922. ; Link Changed?
  923.  
  924.         test    eax, ICR_LSC
  925.         jz      .no_link
  926.  
  927.         DEBUGF  2,"Link Changed\n"
  928.  
  929.         call    link_status
  930.  
  931.   .no_link:
  932.  
  933. ;---------------
  934. ; Transmit done?
  935.  
  936.         test    eax, ICR_TXDW
  937.         jz      .no_tx
  938.  
  939.         DEBUGF  1,"Transmit done\n"
  940.  
  941. ;        call    clean_tx
  942.  
  943.   .no_tx:
  944.         pop     edi esi ebx
  945.         xor     eax, eax
  946.         inc     eax
  947.         ret
  948.  
  949.  
  950.  
  951. clean_tx:
  952.  
  953.   .txdesc_loop:
  954.         mov     edi, [ebx + device.last_tx]
  955.         shl     edi, 4                                  ; edi = edi * sizeof.TDESC
  956.         lea     edi, [ebx + device.tx_desc + edi]
  957.         test    [edi + TDESC.status], TXDESC_DD         ; Descriptor done?
  958.         jz      .no_tx
  959.         cmp     dword[edi + TX_RING_SIZE*sizeof.TDESC], 0
  960.         je      .no_tx
  961.  
  962.         DEBUGF  1,"Cleaning up TX desc: 0x%x\n", edi
  963.  
  964.         push    ebx
  965.         push    dword[edi + TX_RING_SIZE*sizeof.TDESC]
  966.         mov     dword[edi + TX_RING_SIZE*sizeof.TDESC], 0
  967.         invoke  NetFree
  968.         pop     ebx
  969.  
  970.         inc     [ebx + device.last_tx]
  971.         and     [ebx + device.last_tx], TX_RING_SIZE-1
  972.         jmp     .txdesc_loop
  973.  
  974.   .no_tx:
  975.  
  976.         ret
  977.  
  978.  
  979.  
  980.  
  981. ; End of code
  982.  
  983. data fixups
  984. end data
  985.  
  986. include '../peimport.inc'
  987.  
  988. include_debug_strings
  989. my_service      db 'I8254X', 0          ; max 16 chars include zero
  990.  
  991. align 4
  992. devices         dd 0
  993. device_list     rd MAX_DEVICES          ; This list contains all pointers to device structures the driver is handling
  994.  
  995.  
  996.