Subversion Repositories Kolibri OS

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

  1. /* opcode/i386.h -- Intel 80386 opcode macros
  2.    Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
  3.    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
  4.    Free Software Foundation, Inc.
  5.  
  6.    This file is part of GAS, the GNU Assembler, and GDB, the GNU Debugger.
  7.  
  8.    This program is free software; you can redistribute it and/or modify
  9.    it under the terms of the GNU General Public License as published by
  10.    the Free Software Foundation; either version 3 of the License, or
  11.    (at your option) any later version.
  12.  
  13.    This program is distributed in the hope that it will be useful,
  14.    but WITHOUT ANY WARRANTY; without even the implied warranty of
  15.    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16.    GNU General Public License for more details.
  17.  
  18.    You should have received a copy of the GNU General Public License
  19.    along with this program; if not, write to the Free Software
  20.    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  21.    MA 02110-1301, USA.  */
  22.  
  23. /* The SystemV/386 SVR3.2 assembler, and probably all AT&T derived
  24.    ix86 Unix assemblers, generate floating point instructions with
  25.    reversed source and destination registers in certain cases.
  26.    Unfortunately, gcc and possibly many other programs use this
  27.    reversed syntax, so we're stuck with it.
  28.  
  29.    eg. `fsub %st(3),%st' results in st = st - st(3) as expected, but
  30.    `fsub %st,%st(3)' results in st(3) = st - st(3), rather than
  31.    the expected st(3) = st(3) - st
  32.  
  33.    This happens with all the non-commutative arithmetic floating point
  34.    operations with two register operands, where the source register is
  35.    %st, and destination register is %st(i).
  36.  
  37.    The affected opcode map is dceX, dcfX, deeX, defX.  */
  38.  
  39. #ifndef OPCODE_I386_H
  40. #define OPCODE_I386_H
  41.  
  42. #ifndef SYSV386_COMPAT
  43. /* Set non-zero for broken, compatible instructions.  Set to zero for
  44.    non-broken opcodes at your peril.  gcc generates SystemV/386
  45.    compatible instructions.  */
  46. #define SYSV386_COMPAT 1
  47. #endif
  48. #ifndef OLDGCC_COMPAT
  49. /* Set non-zero to cater for old (<= 2.8.1) versions of gcc that could
  50.    generate nonsense fsubp, fsubrp, fdivp and fdivrp with operands
  51.    reversed.  */
  52. #define OLDGCC_COMPAT SYSV386_COMPAT
  53. #endif
  54.  
  55. #define MOV_AX_DISP32 0xa0
  56. #define POP_SEG_SHORT 0x07
  57. #define JUMP_PC_RELATIVE 0xeb
  58. #define INT_OPCODE  0xcd
  59. #define INT3_OPCODE 0xcc
  60. /* The opcode for the fwait instruction, which disassembler treats as a
  61.    prefix when it can.  */
  62. #define FWAIT_OPCODE 0x9b
  63.  
  64. /* Instruction prefixes.
  65.    NOTE: For certain SSE* instructions, 0x66,0xf2,0xf3 are treated as
  66.    part of the opcode.  Other prefixes may still appear between them
  67.    and the 0x0f part of the opcode.  */
  68. #define ADDR_PREFIX_OPCODE 0x67
  69. #define DATA_PREFIX_OPCODE 0x66
  70. #define LOCK_PREFIX_OPCODE 0xf0
  71. #define CS_PREFIX_OPCODE 0x2e
  72. #define DS_PREFIX_OPCODE 0x3e
  73. #define ES_PREFIX_OPCODE 0x26
  74. #define FS_PREFIX_OPCODE 0x64
  75. #define GS_PREFIX_OPCODE 0x65
  76. #define SS_PREFIX_OPCODE 0x36
  77. #define REPNE_PREFIX_OPCODE 0xf2
  78. #define REPE_PREFIX_OPCODE  0xf3
  79. #define XACQUIRE_PREFIX_OPCODE 0xf2
  80. #define XRELEASE_PREFIX_OPCODE 0xf3
  81. #define BND_PREFIX_OPCODE 0xf2
  82.  
  83. #define TWO_BYTE_OPCODE_ESCAPE 0x0f
  84. #define NOP_OPCODE (char) 0x90
  85.  
  86. /* register numbers */
  87. #define EAX_REG_NUM 0
  88. #define ECX_REG_NUM 1
  89. #define EDX_REG_NUM 2
  90. #define EBX_REG_NUM 3
  91. #define ESP_REG_NUM 4
  92. #define EBP_REG_NUM 5
  93. #define ESI_REG_NUM 6
  94. #define EDI_REG_NUM 7
  95.  
  96. /* modrm_byte.regmem for twobyte escape */
  97. #define ESCAPE_TO_TWO_BYTE_ADDRESSING ESP_REG_NUM
  98. /* index_base_byte.index for no index register addressing */
  99. #define NO_INDEX_REGISTER ESP_REG_NUM
  100. /* index_base_byte.base for no base register addressing */
  101. #define NO_BASE_REGISTER EBP_REG_NUM
  102. #define NO_BASE_REGISTER_16 6
  103.  
  104. /* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */
  105. #define REGMEM_FIELD_HAS_REG 0x3/* always = 0x3 */
  106. #define REGMEM_FIELD_HAS_MEM (~REGMEM_FIELD_HAS_REG)
  107.  
  108. /* Extract fields from the mod/rm byte.  */
  109. #define MODRM_MOD_FIELD(modrm) (((modrm) >> 6) & 3)
  110. #define MODRM_REG_FIELD(modrm) (((modrm) >> 3) & 7)
  111. #define MODRM_RM_FIELD(modrm)  (((modrm) >> 0) & 7)
  112.  
  113. /* Extract fields from the sib byte.  */
  114. #define SIB_SCALE_FIELD(sib) (((sib) >> 6) & 3)
  115. #define SIB_INDEX_FIELD(sib) (((sib) >> 3) & 7)
  116. #define SIB_BASE_FIELD(sib)  (((sib) >> 0) & 7)
  117.  
  118. /* x86-64 extension prefix.  */
  119. #define REX_OPCODE      0x40
  120.  
  121. /* Non-zero if OPCODE is the rex prefix.  */
  122. #define REX_PREFIX_P(opcode) (((opcode) & 0xf0) == REX_OPCODE)
  123.  
  124. /* Indicates 64 bit operand size.  */
  125. #define REX_W   8
  126. /* High extension to reg field of modrm byte.  */
  127. #define REX_R   4
  128. /* High extension to SIB index field.  */
  129. #define REX_X   2
  130. /* High extension to base field of modrm or SIB, or reg field of opcode.  */
  131. #define REX_B   1
  132.  
  133. /* max operands per insn */
  134. #define MAX_OPERANDS 5
  135.  
  136. /* max immediates per insn (lcall, ljmp, insertq, extrq) */
  137. #define MAX_IMMEDIATE_OPERANDS 2
  138.  
  139. /* max memory refs per insn (string ops) */
  140. #define MAX_MEMORY_OPERANDS 2
  141.  
  142. /* max size of insn mnemonics.  */
  143. #define MAX_MNEM_SIZE 20
  144.  
  145. /* max size of register name in insn mnemonics.  */
  146. #define MAX_REG_NAME_SIZE 8
  147.  
  148. #endif /* OPCODE_I386_H */
  149.