Subversion Repositories Kolibri OS

Rev

Go to most recent revision | Blame | Compare with Previous | Last modification | View Log | RSS feed

  1. /* BFD back-end for s-record objects.
  2.    Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
  3.    2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2011
  4.    Free Software Foundation, Inc.
  5.    Written by Steve Chamberlain of Cygnus Support <sac@cygnus.com>.
  6.  
  7.    This file is part of BFD, the Binary File Descriptor library.
  8.  
  9.    This program is free software; you can redistribute it and/or modify
  10.    it under the terms of the GNU General Public License as published by
  11.    the Free Software Foundation; either version 3 of the License, or
  12.    (at your option) any later version.
  13.  
  14.    This program is distributed in the hope that it will be useful,
  15.    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16.    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17.    GNU General Public License for more details.
  18.  
  19.    You should have received a copy of the GNU General Public License
  20.    along with this program; if not, write to the Free Software
  21.    Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
  22.    MA 02110-1301, USA.  */
  23.  
  24.  
  25. /* SUBSECTION
  26.         S-Record handling
  27.  
  28.    DESCRIPTION
  29.  
  30.         Ordinary S-Records cannot hold anything but addresses and
  31.         data, so that's all that we implement.
  32.  
  33.         The only interesting thing is that S-Records may come out of
  34.         order and there is no header, so an initial scan is required
  35.         to discover the minimum and maximum addresses used to create
  36.         the vma and size of the only section we create.  We
  37.         arbitrarily call this section ".text".
  38.  
  39.         When bfd_get_section_contents is called the file is read
  40.         again, and this time the data is placed into a bfd_alloc'd
  41.         area.
  42.  
  43.         Any number of sections may be created for output, we save them
  44.         up and output them when it's time to close the bfd.
  45.  
  46.         An s record looks like:
  47.  
  48.    EXAMPLE
  49.         S<type><length><address><data><checksum>
  50.  
  51.    DESCRIPTION
  52.         Where
  53.         o length
  54.         is the number of bytes following upto the checksum. Note that
  55.         this is not the number of chars following, since it takes two
  56.         chars to represent a byte.
  57.         o type
  58.         is one of:
  59.         0) header record
  60.         1) two byte address data record
  61.         2) three byte address data record
  62.         3) four byte address data record
  63.         7) four byte address termination record
  64.         8) three byte address termination record
  65.         9) two byte address termination record
  66.  
  67.         o address
  68.         is the start address of the data following, or in the case of
  69.         a termination record, the start address of the image
  70.         o data
  71.         is the data.
  72.         o checksum
  73.         is the sum of all the raw byte data in the record, from the length
  74.         upwards, modulo 256 and subtracted from 255.
  75.  
  76.    SUBSECTION
  77.         Symbol S-Record handling
  78.  
  79.    DESCRIPTION
  80.         Some ICE equipment understands an addition to the standard
  81.         S-Record format; symbols and their addresses can be sent
  82.         before the data.
  83.  
  84.         The format of this is:
  85.         ($$ <modulename>
  86.                 (<space> <symbol> <address>)*)
  87.         $$
  88.  
  89.         so a short symbol table could look like:
  90.  
  91.    EXAMPLE
  92.         $$ flash.x
  93.         $$ flash.c
  94.           _port6 $0
  95.           _delay $4
  96.           _start $14
  97.           _etext $8036
  98.           _edata $8036
  99.           _end $8036
  100.         $$
  101.  
  102.    DESCRIPTION
  103.         We allow symbols to be anywhere in the data stream - the module names
  104.         are always ignored.  */
  105.  
  106. #include "sysdep.h"
  107. #include "bfd.h"
  108. #include "libbfd.h"
  109. #include "libiberty.h"
  110. #include "safe-ctype.h"
  111.  
  112.  
  113. /* Macros for converting between hex and binary.  */
  114.  
  115. static const char digs[] = "0123456789ABCDEF";
  116.  
  117. #define NIBBLE(x)    hex_value(x)
  118. #define HEX(buffer) ((NIBBLE ((buffer)[0])<<4) + NIBBLE ((buffer)[1]))
  119. #define TOHEX(d, x, ch) \
  120.         d[1] = digs[(x) & 0xf]; \
  121.         d[0] = digs[((x)>>4)&0xf]; \
  122.         ch += ((x) & 0xff);
  123. #define ISHEX(x)    hex_p(x)
  124.  
  125. /* The maximum number of address+data+crc bytes on a line is FF.  */
  126. #define MAXCHUNK 0xff
  127.  
  128. /* Default size for a CHUNK.  */
  129. #define DEFAULT_CHUNK 16
  130.  
  131. /* The number of data bytes we actually fit onto a line on output.
  132.    This variable can be modified by objcopy's --srec-len parameter.
  133.    For a 0x75 byte record you should set --srec-len=0x70.  */
  134. unsigned int Chunk = DEFAULT_CHUNK;
  135.  
  136. /* The type of srec output (free or forced to S3).
  137.    This variable can be modified by objcopy's --srec-forceS3
  138.    parameter.  */
  139. bfd_boolean S3Forced = FALSE;
  140.  
  141. /* When writing an S-record file, the S-records can not be output as
  142.    they are seen.  This structure is used to hold them in memory.  */
  143.  
  144. struct srec_data_list_struct
  145. {
  146.   struct srec_data_list_struct *next;
  147.   bfd_byte *data;
  148.   bfd_vma where;
  149.   bfd_size_type size;
  150. };
  151.  
  152. typedef struct srec_data_list_struct srec_data_list_type;
  153.  
  154. /* When scanning the S-record file, a linked list of srec_symbol
  155.    structures is built to represent the symbol table (if there is
  156.    one).  */
  157.  
  158. struct srec_symbol
  159. {
  160.   struct srec_symbol *next;
  161.   const char *name;
  162.   bfd_vma val;
  163. };
  164.  
  165. /* The S-record tdata information.  */
  166.  
  167. typedef struct srec_data_struct
  168.   {
  169.     srec_data_list_type *head;
  170.     srec_data_list_type *tail;
  171.     unsigned int type;
  172.     struct srec_symbol *symbols;
  173.     struct srec_symbol *symtail;
  174.     asymbol *csymbols;
  175.   }
  176. tdata_type;
  177.  
  178. /* Initialize by filling in the hex conversion array.  */
  179.  
  180. static void
  181. srec_init (void)
  182. {
  183.   static bfd_boolean inited = FALSE;
  184.  
  185.   if (! inited)
  186.     {
  187.       inited = TRUE;
  188.       hex_init ();
  189.     }
  190. }
  191.  
  192. /* Set up the S-record tdata information.  */
  193.  
  194. static bfd_boolean
  195. srec_mkobject (bfd *abfd)
  196. {
  197.   tdata_type *tdata;
  198.  
  199.   srec_init ();
  200.  
  201.   tdata = (tdata_type *) bfd_alloc (abfd, sizeof (tdata_type));
  202.   if (tdata == NULL)
  203.     return FALSE;
  204.  
  205.   abfd->tdata.srec_data = tdata;
  206.   tdata->type = 1;
  207.   tdata->head = NULL;
  208.   tdata->tail = NULL;
  209.   tdata->symbols = NULL;
  210.   tdata->symtail = NULL;
  211.   tdata->csymbols = NULL;
  212.  
  213.   return TRUE;
  214. }
  215.  
  216. /* Read a byte from an S record file.  Set *ERRORPTR if an error
  217.    occurred.  Return EOF on error or end of file.  */
  218.  
  219. static int
  220. srec_get_byte (bfd *abfd, bfd_boolean *errorptr)
  221. {
  222.   bfd_byte c;
  223.  
  224.   if (bfd_bread (&c, (bfd_size_type) 1, abfd) != 1)
  225.     {
  226.       if (bfd_get_error () != bfd_error_file_truncated)
  227.         *errorptr = TRUE;
  228.       return EOF;
  229.     }
  230.  
  231.   return (int) (c & 0xff);
  232. }
  233.  
  234. /* Report a problem in an S record file.  FIXME: This probably should
  235.    not call fprintf, but we really do need some mechanism for printing
  236.    error messages.  */
  237.  
  238. static void
  239. srec_bad_byte (bfd *abfd,
  240.                unsigned int lineno,
  241.                int c,
  242.                bfd_boolean error)
  243. {
  244.   if (c == EOF)
  245.     {
  246.       if (! error)
  247.         bfd_set_error (bfd_error_file_truncated);
  248.     }
  249.   else
  250.     {
  251.       char buf[10];
  252.  
  253.       if (! ISPRINT (c))
  254.         sprintf (buf, "\\%03o", (unsigned int) c);
  255.       else
  256.         {
  257.           buf[0] = c;
  258.           buf[1] = '\0';
  259.         }
  260.       (*_bfd_error_handler)
  261.         (_("%B:%d: Unexpected character `%s' in S-record file\n"),
  262.          abfd, lineno, buf);
  263.       bfd_set_error (bfd_error_bad_value);
  264.     }
  265. }
  266.  
  267. /* Add a new symbol found in an S-record file.  */
  268.  
  269. static bfd_boolean
  270. srec_new_symbol (bfd *abfd, const char *name, bfd_vma val)
  271. {
  272.   struct srec_symbol *n;
  273.  
  274.   n = (struct srec_symbol *) bfd_alloc (abfd, sizeof (* n));
  275.   if (n == NULL)
  276.     return FALSE;
  277.  
  278.   n->name = name;
  279.   n->val = val;
  280.  
  281.   if (abfd->tdata.srec_data->symbols == NULL)
  282.     abfd->tdata.srec_data->symbols = n;
  283.   else
  284.     abfd->tdata.srec_data->symtail->next = n;
  285.   abfd->tdata.srec_data->symtail = n;
  286.   n->next = NULL;
  287.  
  288.   ++abfd->symcount;
  289.  
  290.   return TRUE;
  291. }
  292.  
  293. /* Read the S record file and turn it into sections.  We create a new
  294.    section for each contiguous set of bytes.  */
  295.  
  296. static bfd_boolean
  297. srec_scan (bfd *abfd)
  298. {
  299.   int c;
  300.   unsigned int lineno = 1;
  301.   bfd_boolean error = FALSE;
  302.   bfd_byte *buf = NULL;
  303.   size_t bufsize = 0;
  304.   asection *sec = NULL;
  305.   char *symbuf = NULL;
  306.  
  307.   if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0)
  308.     goto error_return;
  309.  
  310.   while ((c = srec_get_byte (abfd, &error)) != EOF)
  311.     {
  312.       /* We only build sections from contiguous S-records, so if this
  313.          is not an S-record, then stop building a section.  */
  314.       if (c != 'S' && c != '\r' && c != '\n')
  315.         sec = NULL;
  316.  
  317.       switch (c)
  318.         {
  319.         default:
  320.           srec_bad_byte (abfd, lineno, c, error);
  321.           goto error_return;
  322.  
  323.         case '\n':
  324.           ++lineno;
  325.           break;
  326.  
  327.         case '\r':
  328.           break;
  329.  
  330.         case '$':
  331.           /* Starting a module name, which we ignore.  */
  332.           while ((c = srec_get_byte (abfd, &error)) != '\n'
  333.                  && c != EOF)
  334.             ;
  335.           if (c == EOF)
  336.             {
  337.               srec_bad_byte (abfd, lineno, c, error);
  338.               goto error_return;
  339.             }
  340.  
  341.           ++lineno;
  342.           break;
  343.  
  344.         case ' ':
  345.           do
  346.             {
  347.               bfd_size_type alc;
  348.               char *p, *symname;
  349.               bfd_vma symval;
  350.  
  351.               /* Starting a symbol definition.  */
  352.               while ((c = srec_get_byte (abfd, &error)) != EOF
  353.                      && (c == ' ' || c == '\t'))
  354.                 ;
  355.  
  356.               if (c == '\n' || c == '\r')
  357.                 break;
  358.  
  359.               if (c == EOF)
  360.                 {
  361.                   srec_bad_byte (abfd, lineno, c, error);
  362.                   goto error_return;
  363.                 }
  364.  
  365.               alc = 10;
  366.               symbuf = (char *) bfd_malloc (alc + 1);
  367.               if (symbuf == NULL)
  368.                 goto error_return;
  369.  
  370.               p = symbuf;
  371.  
  372.               *p++ = c;
  373.               while ((c = srec_get_byte (abfd, &error)) != EOF
  374.                      && ! ISSPACE (c))
  375.                 {
  376.                   if ((bfd_size_type) (p - symbuf) >= alc)
  377.                     {
  378.                       char *n;
  379.  
  380.                       alc *= 2;
  381.                       n = (char *) bfd_realloc (symbuf, alc + 1);
  382.                       if (n == NULL)
  383.                         goto error_return;
  384.                       p = n + (p - symbuf);
  385.                       symbuf = n;
  386.                     }
  387.  
  388.                   *p++ = c;
  389.                 }
  390.  
  391.               if (c == EOF)
  392.                 {
  393.                   srec_bad_byte (abfd, lineno, c, error);
  394.                   goto error_return;
  395.                 }
  396.  
  397.               *p++ = '\0';
  398.               symname = (char *) bfd_alloc (abfd, (bfd_size_type) (p - symbuf));
  399.               if (symname == NULL)
  400.                 goto error_return;
  401.               strcpy (symname, symbuf);
  402.               free (symbuf);
  403.               symbuf = NULL;
  404.  
  405.               while ((c = srec_get_byte (abfd, &error)) != EOF
  406.                      && (c == ' ' || c == '\t'))
  407.                 ;
  408.               if (c == EOF)
  409.                 {
  410.                   srec_bad_byte (abfd, lineno, c, error);
  411.                   goto error_return;
  412.                 }
  413.  
  414.               /* Skip a dollar sign before the hex value.  */
  415.               if (c == '$')
  416.                 {
  417.                   c = srec_get_byte (abfd, &error);
  418.                   if (c == EOF)
  419.                     {
  420.                       srec_bad_byte (abfd, lineno, c, error);
  421.                       goto error_return;
  422.                     }
  423.                 }
  424.  
  425.               symval = 0;
  426.               while (ISHEX (c))
  427.                 {
  428.                   symval <<= 4;
  429.                   symval += NIBBLE (c);
  430.                   c = srec_get_byte (abfd, &error);
  431.                   if (c == EOF)
  432.                     {
  433.                       srec_bad_byte (abfd, lineno, c, error);
  434.                       goto error_return;
  435.                     }
  436.                 }
  437.  
  438.               if (! srec_new_symbol (abfd, symname, symval))
  439.                 goto error_return;
  440.             }
  441.           while (c == ' ' || c == '\t')
  442.             ;
  443.  
  444.           if (c == '\n')
  445.             ++lineno;
  446.           else if (c != '\r')
  447.             {
  448.               srec_bad_byte (abfd, lineno, c, error);
  449.               goto error_return;
  450.             }
  451.  
  452.           break;
  453.  
  454.         case 'S':
  455.           {
  456.             file_ptr pos;
  457.             char hdr[3];
  458.             unsigned int bytes;
  459.             bfd_vma address;
  460.             bfd_byte *data;
  461.             unsigned char check_sum;
  462.  
  463.             /* Starting an S-record.  */
  464.  
  465.             pos = bfd_tell (abfd) - 1;
  466.  
  467.             if (bfd_bread (hdr, (bfd_size_type) 3, abfd) != 3)
  468.               goto error_return;
  469.  
  470.             if (! ISHEX (hdr[1]) || ! ISHEX (hdr[2]))
  471.               {
  472.                 if (! ISHEX (hdr[1]))
  473.                   c = hdr[1];
  474.                 else
  475.                   c = hdr[2];
  476.                 srec_bad_byte (abfd, lineno, c, error);
  477.                 goto error_return;
  478.               }
  479.  
  480.             check_sum = bytes = HEX (hdr + 1);
  481.             if (bytes * 2 > bufsize)
  482.               {
  483.                 if (buf != NULL)
  484.                   free (buf);
  485.                 buf = (bfd_byte *) bfd_malloc ((bfd_size_type) bytes * 2);
  486.                 if (buf == NULL)
  487.                   goto error_return;
  488.                 bufsize = bytes * 2;
  489.               }
  490.  
  491.             if (bfd_bread (buf, (bfd_size_type) bytes * 2, abfd) != bytes * 2)
  492.               goto error_return;
  493.  
  494.             /* Ignore the checksum byte.  */
  495.             --bytes;
  496.  
  497.             address = 0;
  498.             data = buf;
  499.             switch (hdr[0])
  500.               {
  501.               case '0':
  502.               case '5':
  503.                 /* Prologue--ignore the file name, but stop building a
  504.                    section at this point.  */
  505.                 sec = NULL;
  506.                 break;
  507.  
  508.               case '3':
  509.                 check_sum += HEX (data);
  510.                 address = HEX (data);
  511.                 data += 2;
  512.                 --bytes;
  513.                 /* Fall through.  */
  514.               case '2':
  515.                 check_sum += HEX (data);
  516.                 address = (address << 8) | HEX (data);
  517.                 data += 2;
  518.                 --bytes;
  519.                 /* Fall through.  */
  520.               case '1':
  521.                 check_sum += HEX (data);
  522.                 address = (address << 8) | HEX (data);
  523.                 data += 2;
  524.                 check_sum += HEX (data);
  525.                 address = (address << 8) | HEX (data);
  526.                 data += 2;
  527.                 bytes -= 2;
  528.  
  529.                 if (sec != NULL
  530.                     && sec->vma + sec->size == address)
  531.                   {
  532.                     /* This data goes at the end of the section we are
  533.                        currently building.  */
  534.                     sec->size += bytes;
  535.                   }
  536.                 else
  537.                   {
  538.                     char secbuf[20];
  539.                     char *secname;
  540.                     bfd_size_type amt;
  541.                     flagword flags;
  542.  
  543.                     sprintf (secbuf, ".sec%d", bfd_count_sections (abfd) + 1);
  544.                     amt = strlen (secbuf) + 1;
  545.                     secname = (char *) bfd_alloc (abfd, amt);
  546.                     strcpy (secname, secbuf);
  547.                     flags = SEC_HAS_CONTENTS | SEC_LOAD | SEC_ALLOC;
  548.                     sec = bfd_make_section_with_flags (abfd, secname, flags);
  549.                     if (sec == NULL)
  550.                       goto error_return;
  551.                     sec->vma = address;
  552.                     sec->lma = address;
  553.                     sec->size = bytes;
  554.                     sec->filepos = pos;
  555.                   }
  556.  
  557.                 while (bytes > 0)
  558.                   {
  559.                     check_sum += HEX (data);
  560.                     data += 2;
  561.                     bytes--;
  562.                   }
  563.                 check_sum = 255 - (check_sum & 0xff);
  564.                 if (check_sum != HEX (data))
  565.                   {
  566.                     (*_bfd_error_handler)
  567.                       (_("%B:%d: Bad checksum in S-record file\n"),
  568.                        abfd, lineno);
  569.                     bfd_set_error (bfd_error_bad_value);
  570.                     goto error_return;
  571.                   }
  572.  
  573.                 break;
  574.  
  575.               case '7':
  576.                 check_sum += HEX (data);
  577.                 address = HEX (data);
  578.                 data += 2;
  579.                 /* Fall through.  */
  580.               case '8':
  581.                 check_sum += HEX (data);
  582.                 address = (address << 8) | HEX (data);
  583.                 data += 2;
  584.                 /* Fall through.  */
  585.               case '9':
  586.                 check_sum += HEX (data);
  587.                 address = (address << 8) | HEX (data);
  588.                 data += 2;
  589.                 check_sum += HEX (data);
  590.                 address = (address << 8) | HEX (data);
  591.                 data += 2;
  592.  
  593.                 /* This is a termination record.  */
  594.                 abfd->start_address = address;
  595.  
  596.                 check_sum = 255 - (check_sum & 0xff);
  597.                 if (check_sum != HEX (data))
  598.                   {
  599.                     (*_bfd_error_handler)
  600.                       (_("%B:%d: Bad checksum in S-record file\n"),
  601.                        abfd, lineno);
  602.                     bfd_set_error (bfd_error_bad_value);
  603.                     goto error_return;
  604.                   }
  605.  
  606.                 if (buf != NULL)
  607.                   free (buf);
  608.  
  609.                 return TRUE;
  610.               }
  611.           }
  612.           break;
  613.         }
  614.     }
  615.  
  616.   if (error)
  617.     goto error_return;
  618.  
  619.   if (buf != NULL)
  620.     free (buf);
  621.  
  622.   return TRUE;
  623.  
  624.  error_return:
  625.   if (symbuf != NULL)
  626.     free (symbuf);
  627.   if (buf != NULL)
  628.     free (buf);
  629.   return FALSE;
  630. }
  631.  
  632. /* Check whether an existing file is an S-record file.  */
  633.  
  634. static const bfd_target *
  635. srec_object_p (bfd *abfd)
  636. {
  637.   void * tdata_save;
  638.   bfd_byte b[4];
  639.  
  640.   srec_init ();
  641.  
  642.   if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0
  643.       || bfd_bread (b, (bfd_size_type) 4, abfd) != 4)
  644.     return NULL;
  645.  
  646.   if (b[0] != 'S' || !ISHEX (b[1]) || !ISHEX (b[2]) || !ISHEX (b[3]))
  647.     {
  648.       bfd_set_error (bfd_error_wrong_format);
  649.       return NULL;
  650.     }
  651.  
  652.   tdata_save = abfd->tdata.any;
  653.   if (! srec_mkobject (abfd) || ! srec_scan (abfd))
  654.     {
  655.       if (abfd->tdata.any != tdata_save && abfd->tdata.any != NULL)
  656.         bfd_release (abfd, abfd->tdata.any);
  657.       abfd->tdata.any = tdata_save;
  658.       return NULL;
  659.     }
  660.  
  661.   if (abfd->symcount > 0)
  662.     abfd->flags |= HAS_SYMS;
  663.  
  664.   return abfd->xvec;
  665. }
  666.  
  667. /* Check whether an existing file is an S-record file with symbols.  */
  668.  
  669. static const bfd_target *
  670. symbolsrec_object_p (bfd *abfd)
  671. {
  672.   void * tdata_save;
  673.   char b[2];
  674.  
  675.   srec_init ();
  676.  
  677.   if (bfd_seek (abfd, (file_ptr) 0, SEEK_SET) != 0
  678.       || bfd_bread (b, (bfd_size_type) 2, abfd) != 2)
  679.     return NULL;
  680.  
  681.   if (b[0] != '$' || b[1] != '$')
  682.     {
  683.       bfd_set_error (bfd_error_wrong_format);
  684.       return NULL;
  685.     }
  686.  
  687.   tdata_save = abfd->tdata.any;
  688.   if (! srec_mkobject (abfd) || ! srec_scan (abfd))
  689.     {
  690.       if (abfd->tdata.any != tdata_save && abfd->tdata.any != NULL)
  691.         bfd_release (abfd, abfd->tdata.any);
  692.       abfd->tdata.any = tdata_save;
  693.       return NULL;
  694.     }
  695.  
  696.   if (abfd->symcount > 0)
  697.     abfd->flags |= HAS_SYMS;
  698.  
  699.   return abfd->xvec;
  700. }
  701.  
  702. /* Read in the contents of a section in an S-record file.  */
  703.  
  704. static bfd_boolean
  705. srec_read_section (bfd *abfd, asection *section, bfd_byte *contents)
  706. {
  707.   int c;
  708.   bfd_size_type sofar = 0;
  709.   bfd_boolean error = FALSE;
  710.   bfd_byte *buf = NULL;
  711.   size_t bufsize = 0;
  712.  
  713.   if (bfd_seek (abfd, section->filepos, SEEK_SET) != 0)
  714.     goto error_return;
  715.  
  716.   while ((c = srec_get_byte (abfd, &error)) != EOF)
  717.     {
  718.       bfd_byte hdr[3];
  719.       unsigned int bytes;
  720.       bfd_vma address;
  721.       bfd_byte *data;
  722.  
  723.       if (c == '\r' || c == '\n')
  724.         continue;
  725.  
  726.       /* This is called after srec_scan has already been called, so we
  727.          ought to know the exact format.  */
  728.       BFD_ASSERT (c == 'S');
  729.  
  730.       if (bfd_bread (hdr, (bfd_size_type) 3, abfd) != 3)
  731.         goto error_return;
  732.  
  733.       BFD_ASSERT (ISHEX (hdr[1]) && ISHEX (hdr[2]));
  734.  
  735.       bytes = HEX (hdr + 1);
  736.  
  737.       if (bytes * 2 > bufsize)
  738.         {
  739.           if (buf != NULL)
  740.             free (buf);
  741.           buf = (bfd_byte *) bfd_malloc ((bfd_size_type) bytes * 2);
  742.           if (buf == NULL)
  743.             goto error_return;
  744.           bufsize = bytes * 2;
  745.         }
  746.  
  747.       if (bfd_bread (buf, (bfd_size_type) bytes * 2, abfd) != bytes * 2)
  748.         goto error_return;
  749.  
  750.       address = 0;
  751.       data = buf;
  752.       switch (hdr[0])
  753.         {
  754.         default:
  755.           BFD_ASSERT (sofar == section->size);
  756.           if (buf != NULL)
  757.             free (buf);
  758.           return TRUE;
  759.  
  760.         case '3':
  761.           address = HEX (data);
  762.           data += 2;
  763.           --bytes;
  764.           /* Fall through.  */
  765.         case '2':
  766.           address = (address << 8) | HEX (data);
  767.           data += 2;
  768.           --bytes;
  769.           /* Fall through.  */
  770.         case '1':
  771.           address = (address << 8) | HEX (data);
  772.           data += 2;
  773.           address = (address << 8) | HEX (data);
  774.           data += 2;
  775.           bytes -= 2;
  776.  
  777.           if (address != section->vma + sofar)
  778.             {
  779.               /* We've come to the end of this section.  */
  780.               BFD_ASSERT (sofar == section->size);
  781.               if (buf != NULL)
  782.                 free (buf);
  783.               return TRUE;
  784.             }
  785.  
  786.           /* Don't consider checksum.  */
  787.           --bytes;
  788.  
  789.           while (bytes-- != 0)
  790.             {
  791.               contents[sofar] = HEX (data);
  792.               data += 2;
  793.               ++sofar;
  794.             }
  795.  
  796.           break;
  797.         }
  798.     }
  799.  
  800.   if (error)
  801.     goto error_return;
  802.  
  803.   BFD_ASSERT (sofar == section->size);
  804.  
  805.   if (buf != NULL)
  806.     free (buf);
  807.  
  808.   return TRUE;
  809.  
  810.  error_return:
  811.   if (buf != NULL)
  812.     free (buf);
  813.   return FALSE;
  814. }
  815.  
  816. /* Get the contents of a section in an S-record file.  */
  817.  
  818. static bfd_boolean
  819. srec_get_section_contents (bfd *abfd,
  820.                            asection *section,
  821.                            void * location,
  822.                            file_ptr offset,
  823.                            bfd_size_type count)
  824. {
  825.   if (count == 0)
  826.     return TRUE;
  827.  
  828.   if (offset + count < count
  829.       || offset + count > section->size)
  830.     {
  831.       bfd_set_error (bfd_error_invalid_operation);
  832.       return FALSE;
  833.     }
  834.  
  835.   if (section->used_by_bfd == NULL)
  836.     {
  837.       section->used_by_bfd = bfd_alloc (abfd, section->size);
  838.       if (section->used_by_bfd == NULL)
  839.         return FALSE;
  840.  
  841.       if (! srec_read_section (abfd, section,
  842.                                (bfd_byte *) section->used_by_bfd))
  843.         return FALSE;
  844.     }
  845.  
  846.   memcpy (location, (bfd_byte *) section->used_by_bfd + offset,
  847.           (size_t) count);
  848.  
  849.   return TRUE;
  850. }
  851.  
  852. /* Set the architecture.  We accept an unknown architecture here.  */
  853.  
  854. static bfd_boolean
  855. srec_set_arch_mach (bfd *abfd, enum bfd_architecture arch, unsigned long mach)
  856. {
  857.   if (arch != bfd_arch_unknown)
  858.     return bfd_default_set_arch_mach (abfd, arch, mach);
  859.  
  860.   abfd->arch_info = & bfd_default_arch_struct;
  861.   return TRUE;
  862. }
  863.  
  864. /* We have to save up all the Srecords for a splurge before output.  */
  865.  
  866. static bfd_boolean
  867. srec_set_section_contents (bfd *abfd,
  868.                            sec_ptr section,
  869.                            const void * location,
  870.                            file_ptr offset,
  871.                            bfd_size_type bytes_to_do)
  872. {
  873.   int opb = bfd_octets_per_byte (abfd);
  874.   tdata_type *tdata = abfd->tdata.srec_data;
  875.   srec_data_list_type *entry;
  876.  
  877.   entry = (srec_data_list_type *) bfd_alloc (abfd, sizeof (* entry));
  878.   if (entry == NULL)
  879.     return FALSE;
  880.  
  881.   if (bytes_to_do
  882.       && (section->flags & SEC_ALLOC)
  883.       && (section->flags & SEC_LOAD))
  884.     {
  885.       bfd_byte *data;
  886.  
  887.       data = (bfd_byte *) bfd_alloc (abfd, bytes_to_do);
  888.       if (data == NULL)
  889.         return FALSE;
  890.       memcpy ((void *) data, location, (size_t) bytes_to_do);
  891.  
  892.       /* Ff S3Forced is TRUE then always select S3 records,
  893.          regardless of the siez of the addresses.  */
  894.       if (S3Forced)
  895.         tdata->type = 3;
  896.       else if ((section->lma + (offset + bytes_to_do) / opb - 1) <= 0xffff)
  897.         ;  /* The default, S1, is OK.  */
  898.       else if ((section->lma + (offset + bytes_to_do) / opb - 1) <= 0xffffff
  899.                && tdata->type <= 2)
  900.         tdata->type = 2;
  901.       else
  902.         tdata->type = 3;
  903.  
  904.       entry->data = data;
  905.       entry->where = section->lma + offset / opb;
  906.       entry->size = bytes_to_do;
  907.  
  908.       /* Sort the records by address.  Optimize for the common case of
  909.          adding a record to the end of the list.  */
  910.       if (tdata->tail != NULL
  911.           && entry->where >= tdata->tail->where)
  912.         {
  913.           tdata->tail->next = entry;
  914.           entry->next = NULL;
  915.           tdata->tail = entry;
  916.         }
  917.       else
  918.         {
  919.           srec_data_list_type **look;
  920.  
  921.           for (look = &tdata->head;
  922.                *look != NULL && (*look)->where < entry->where;
  923.                look = &(*look)->next)
  924.             ;
  925.           entry->next = *look;
  926.           *look = entry;
  927.           if (entry->next == NULL)
  928.             tdata->tail = entry;
  929.         }
  930.     }
  931.   return TRUE;
  932. }
  933.  
  934. /* Write a record of type, of the supplied number of bytes. The
  935.    supplied bytes and length don't have a checksum. That's worked out
  936.    here.  */
  937.  
  938. static bfd_boolean
  939. srec_write_record (bfd *abfd,
  940.                    unsigned int type,
  941.                    bfd_vma address,
  942.                    const bfd_byte *data,
  943.                    const bfd_byte *end)
  944. {
  945.   char buffer[2 * MAXCHUNK + 6];
  946.   unsigned int check_sum = 0;
  947.   const bfd_byte *src = data;
  948.   char *dst = buffer;
  949.   char *length;
  950.   bfd_size_type wrlen;
  951.  
  952.   *dst++ = 'S';
  953.   *dst++ = '0' + type;
  954.  
  955.   length = dst;
  956.   dst += 2;                     /* Leave room for dst.  */
  957.  
  958.   switch (type)
  959.     {
  960.     case 3:
  961.     case 7:
  962.       TOHEX (dst, (address >> 24), check_sum);
  963.       dst += 2;
  964.     case 8:
  965.     case 2:
  966.       TOHEX (dst, (address >> 16), check_sum);
  967.       dst += 2;
  968.     case 9:
  969.     case 1:
  970.     case 0:
  971.       TOHEX (dst, (address >> 8), check_sum);
  972.       dst += 2;
  973.       TOHEX (dst, (address), check_sum);
  974.       dst += 2;
  975.       break;
  976.  
  977.     }
  978.   for (src = data; src < end; src++)
  979.     {
  980.       TOHEX (dst, *src, check_sum);
  981.       dst += 2;
  982.     }
  983.  
  984.   /* Fill in the length.  */
  985.   TOHEX (length, (dst - length) / 2, check_sum);
  986.   check_sum &= 0xff;
  987.   check_sum = 255 - check_sum;
  988.   TOHEX (dst, check_sum, check_sum);
  989.   dst += 2;
  990.  
  991.   *dst++ = '\r';
  992.   *dst++ = '\n';
  993.   wrlen = dst - buffer;
  994.  
  995.   return bfd_bwrite ((void *) buffer, wrlen, abfd) == wrlen;
  996. }
  997.  
  998. static bfd_boolean
  999. srec_write_header (bfd *abfd)
  1000. {
  1001.   unsigned int len = strlen (abfd->filename);
  1002.  
  1003.   /* I'll put an arbitrary 40 char limit on header size.  */
  1004.   if (len > 40)
  1005.     len = 40;
  1006.  
  1007.   return srec_write_record (abfd, 0, (bfd_vma) 0,
  1008.                             (bfd_byte *) abfd->filename,
  1009.                             (bfd_byte *) abfd->filename + len);
  1010. }
  1011.  
  1012. static bfd_boolean
  1013. srec_write_section (bfd *abfd,
  1014.                     tdata_type *tdata,
  1015.                     srec_data_list_type *list)
  1016. {
  1017.   unsigned int octets_written = 0;
  1018.   bfd_byte *location = list->data;
  1019.  
  1020.   /* Validate number of data bytes to write.  The srec length byte
  1021.      counts the address, data and crc bytes.  S1 (tdata->type == 1)
  1022.      records have two address bytes, S2 (tdata->type == 2) records
  1023.      have three, and S3 (tdata->type == 3) records have four.
  1024.      The total length can't exceed 255, and a zero data length will
  1025.      spin for a long time.  */
  1026.   if (Chunk == 0)
  1027.     Chunk = 1;
  1028.   else if (Chunk > MAXCHUNK - tdata->type - 2)
  1029.     Chunk = MAXCHUNK - tdata->type - 2;
  1030.  
  1031.   while (octets_written < list->size)
  1032.     {
  1033.       bfd_vma address;
  1034.       unsigned int octets_this_chunk = list->size - octets_written;
  1035.  
  1036.       if (octets_this_chunk > Chunk)
  1037.         octets_this_chunk = Chunk;
  1038.  
  1039.       address = list->where + octets_written / bfd_octets_per_byte (abfd);
  1040.  
  1041.       if (! srec_write_record (abfd,
  1042.                                tdata->type,
  1043.                                address,
  1044.                                location,
  1045.                                location + octets_this_chunk))
  1046.         return FALSE;
  1047.  
  1048.       octets_written += octets_this_chunk;
  1049.       location += octets_this_chunk;
  1050.     }
  1051.  
  1052.   return TRUE;
  1053. }
  1054.  
  1055. static bfd_boolean
  1056. srec_write_terminator (bfd *abfd, tdata_type *tdata)
  1057. {
  1058.   return srec_write_record (abfd, 10 - tdata->type,
  1059.                             abfd->start_address, NULL, NULL);
  1060. }
  1061.  
  1062. static bfd_boolean
  1063. srec_write_symbols (bfd *abfd)
  1064. {
  1065.   /* Dump out the symbols of a bfd.  */
  1066.   int i;
  1067.   int count = bfd_get_symcount (abfd);
  1068.  
  1069.   if (count)
  1070.     {
  1071.       bfd_size_type len;
  1072.       asymbol **table = bfd_get_outsymbols (abfd);
  1073.  
  1074.       len = strlen (abfd->filename);
  1075.       if (bfd_bwrite ("$$ ", (bfd_size_type) 3, abfd) != 3
  1076.           || bfd_bwrite (abfd->filename, len, abfd) != len
  1077.           || bfd_bwrite ("\r\n", (bfd_size_type) 2, abfd) != 2)
  1078.         return FALSE;
  1079.  
  1080.       for (i = 0; i < count; i++)
  1081.         {
  1082.           asymbol *s = table[i];
  1083.           if (! bfd_is_local_label (abfd, s)
  1084.               && (s->flags & BSF_DEBUGGING) == 0)
  1085.             {
  1086.               /* Just dump out non debug symbols.  */
  1087.               char buf[43], *p;
  1088.  
  1089.               len = strlen (s->name);
  1090.               if (bfd_bwrite ("  ", (bfd_size_type) 2, abfd) != 2
  1091.                   || bfd_bwrite (s->name, len, abfd) != len)
  1092.                 return FALSE;
  1093.  
  1094.               sprintf_vma (buf + 2, (s->value
  1095.                                      + s->section->output_section->lma
  1096.                                      + s->section->output_offset));
  1097.               p = buf + 2;
  1098.               while (p[0] == '0' && p[1] != 0)
  1099.                 p++;
  1100.               len = strlen (p);
  1101.               p[len] = '\r';
  1102.               p[len + 1] = '\n';
  1103.               *--p = '$';
  1104.               *--p = ' ';
  1105.               len += 4;
  1106.               if (bfd_bwrite (p, len, abfd) != len)
  1107.                 return FALSE;
  1108.             }
  1109.         }
  1110.       if (bfd_bwrite ("$$ \r\n", (bfd_size_type) 5, abfd) != 5)
  1111.         return FALSE;
  1112.     }
  1113.  
  1114.   return TRUE;
  1115. }
  1116.  
  1117. static bfd_boolean
  1118. internal_srec_write_object_contents (bfd *abfd, int symbols)
  1119. {
  1120.   tdata_type *tdata = abfd->tdata.srec_data;
  1121.   srec_data_list_type *list;
  1122.  
  1123.   if (symbols)
  1124.     {
  1125.       if (! srec_write_symbols (abfd))
  1126.         return FALSE;
  1127.     }
  1128.  
  1129.   if (! srec_write_header (abfd))
  1130.     return FALSE;
  1131.  
  1132.   /* Now wander though all the sections provided and output them.  */
  1133.   list = tdata->head;
  1134.  
  1135.   while (list != (srec_data_list_type *) NULL)
  1136.     {
  1137.       if (! srec_write_section (abfd, tdata, list))
  1138.         return FALSE;
  1139.       list = list->next;
  1140.     }
  1141.   return srec_write_terminator (abfd, tdata);
  1142. }
  1143.  
  1144. static bfd_boolean
  1145. srec_write_object_contents (bfd *abfd)
  1146. {
  1147.   return internal_srec_write_object_contents (abfd, 0);
  1148. }
  1149.  
  1150. static bfd_boolean
  1151. symbolsrec_write_object_contents (bfd *abfd)
  1152. {
  1153.   return internal_srec_write_object_contents (abfd, 1);
  1154. }
  1155.  
  1156. static int
  1157. srec_sizeof_headers (bfd *abfd ATTRIBUTE_UNUSED,
  1158.                      struct bfd_link_info *info ATTRIBUTE_UNUSED)
  1159. {
  1160.   return 0;
  1161. }
  1162.  
  1163. /* Return the amount of memory needed to read the symbol table.  */
  1164.  
  1165. static long
  1166. srec_get_symtab_upper_bound (bfd *abfd)
  1167. {
  1168.   return (bfd_get_symcount (abfd) + 1) * sizeof (asymbol *);
  1169. }
  1170.  
  1171. /* Return the symbol table.  */
  1172.  
  1173. static long
  1174. srec_canonicalize_symtab (bfd *abfd, asymbol **alocation)
  1175. {
  1176.   bfd_size_type symcount = bfd_get_symcount (abfd);
  1177.   asymbol *csymbols;
  1178.   unsigned int i;
  1179.  
  1180.   csymbols = abfd->tdata.srec_data->csymbols;
  1181.   if (csymbols == NULL && symcount != 0)
  1182.     {
  1183.       asymbol *c;
  1184.       struct srec_symbol *s;
  1185.  
  1186.       csymbols = (asymbol *) bfd_alloc (abfd, symcount * sizeof (asymbol));
  1187.       if (csymbols == NULL)
  1188.         return -1;
  1189.       abfd->tdata.srec_data->csymbols = csymbols;
  1190.  
  1191.       for (s = abfd->tdata.srec_data->symbols, c = csymbols;
  1192.            s != NULL;
  1193.            s = s->next, ++c)
  1194.         {
  1195.           c->the_bfd = abfd;
  1196.           c->name = s->name;
  1197.           c->value = s->val;
  1198.           c->flags = BSF_GLOBAL;
  1199.           c->section = bfd_abs_section_ptr;
  1200.           c->udata.p = NULL;
  1201.         }
  1202.     }
  1203.  
  1204.   for (i = 0; i < symcount; i++)
  1205.     *alocation++ = csymbols++;
  1206.   *alocation = NULL;
  1207.  
  1208.   return symcount;
  1209. }
  1210.  
  1211. static void
  1212. srec_get_symbol_info (bfd *ignore_abfd ATTRIBUTE_UNUSED,
  1213.                       asymbol *symbol,
  1214.                       symbol_info *ret)
  1215. {
  1216.   bfd_symbol_info (symbol, ret);
  1217. }
  1218.  
  1219. static void
  1220. srec_print_symbol (bfd *abfd,
  1221.                    void * afile,
  1222.                    asymbol *symbol,
  1223.                    bfd_print_symbol_type how)
  1224. {
  1225.   FILE *file = (FILE *) afile;
  1226.  
  1227.   switch (how)
  1228.     {
  1229.     case bfd_print_symbol_name:
  1230.       fprintf (file, "%s", symbol->name);
  1231.       break;
  1232.     default:
  1233.       bfd_print_symbol_vandf (abfd, (void *) file, symbol);
  1234.       fprintf (file, " %-5s %s",
  1235.                symbol->section->name,
  1236.                symbol->name);
  1237.     }
  1238. }
  1239.  
  1240. #define srec_close_and_cleanup                    _bfd_generic_close_and_cleanup
  1241. #define srec_bfd_free_cached_info                 _bfd_generic_bfd_free_cached_info
  1242. #define srec_new_section_hook                     _bfd_generic_new_section_hook
  1243. #define srec_bfd_is_target_special_symbol         ((bfd_boolean (*) (bfd *, asymbol *)) bfd_false)
  1244. #define srec_bfd_is_local_label_name              bfd_generic_is_local_label_name
  1245. #define srec_get_lineno                           _bfd_nosymbols_get_lineno
  1246. #define srec_find_nearest_line                    _bfd_nosymbols_find_nearest_line
  1247. #define srec_find_inliner_info                    _bfd_nosymbols_find_inliner_info
  1248. #define srec_make_empty_symbol                    _bfd_generic_make_empty_symbol
  1249. #define srec_bfd_make_debug_symbol                _bfd_nosymbols_bfd_make_debug_symbol
  1250. #define srec_read_minisymbols                     _bfd_generic_read_minisymbols
  1251. #define srec_minisymbol_to_symbol                 _bfd_generic_minisymbol_to_symbol
  1252. #define srec_get_section_contents_in_window       _bfd_generic_get_section_contents_in_window
  1253. #define srec_bfd_get_relocated_section_contents   bfd_generic_get_relocated_section_contents
  1254. #define srec_bfd_relax_section                    bfd_generic_relax_section
  1255. #define srec_bfd_gc_sections                      bfd_generic_gc_sections
  1256. #define srec_bfd_lookup_section_flags             bfd_generic_lookup_section_flags
  1257. #define srec_bfd_merge_sections                   bfd_generic_merge_sections
  1258. #define srec_bfd_is_group_section                 bfd_generic_is_group_section
  1259. #define srec_bfd_discard_group                    bfd_generic_discard_group
  1260. #define srec_section_already_linked               _bfd_generic_section_already_linked
  1261. #define srec_bfd_define_common_symbol             bfd_generic_define_common_symbol
  1262. #define srec_bfd_link_hash_table_create           _bfd_generic_link_hash_table_create
  1263. #define srec_bfd_link_hash_table_free             _bfd_generic_link_hash_table_free
  1264. #define srec_bfd_link_add_symbols                 _bfd_generic_link_add_symbols
  1265. #define srec_bfd_link_just_syms                   _bfd_generic_link_just_syms
  1266. #define srec_bfd_copy_link_hash_symbol_type \
  1267.   _bfd_generic_copy_link_hash_symbol_type
  1268. #define srec_bfd_final_link                       _bfd_generic_final_link
  1269. #define srec_bfd_link_split_section               _bfd_generic_link_split_section
  1270.  
  1271. const bfd_target srec_vec =
  1272. {
  1273.   "srec",                       /* Name.  */
  1274.   bfd_target_srec_flavour,
  1275.   BFD_ENDIAN_UNKNOWN,           /* Target byte order.  */
  1276.   BFD_ENDIAN_UNKNOWN,           /* Target headers byte order.  */
  1277.   (HAS_RELOC | EXEC_P |         /* Object flags.  */
  1278.    HAS_LINENO | HAS_DEBUG |
  1279.    HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
  1280.   (SEC_CODE | SEC_DATA | SEC_ROM | SEC_HAS_CONTENTS
  1281.    | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* Section flags.  */
  1282.   0,                            /* Leading underscore.  */
  1283.   ' ',                          /* AR_pad_char.  */
  1284.   16,                           /* AR_max_namelen.  */
  1285.   0,                            /* match priority.  */
  1286.   bfd_getb64, bfd_getb_signed_64, bfd_putb64,
  1287.   bfd_getb32, bfd_getb_signed_32, bfd_putb32,
  1288.   bfd_getb16, bfd_getb_signed_16, bfd_putb16,   /* Data.  */
  1289.   bfd_getb64, bfd_getb_signed_64, bfd_putb64,
  1290.   bfd_getb32, bfd_getb_signed_32, bfd_putb32,
  1291.   bfd_getb16, bfd_getb_signed_16, bfd_putb16,   /* Hdrs.  */
  1292.  
  1293.   {
  1294.     _bfd_dummy_target,
  1295.     srec_object_p,              /* bfd_check_format.  */
  1296.     _bfd_dummy_target,
  1297.     _bfd_dummy_target,
  1298.   },
  1299.   {
  1300.     bfd_false,
  1301.     srec_mkobject,
  1302.     _bfd_generic_mkarchive,
  1303.     bfd_false,
  1304.   },
  1305.   {                             /* bfd_write_contents.  */
  1306.     bfd_false,
  1307.     srec_write_object_contents,
  1308.     _bfd_write_archive_contents,
  1309.     bfd_false,
  1310.   },
  1311.  
  1312.   BFD_JUMP_TABLE_GENERIC (srec),
  1313.   BFD_JUMP_TABLE_COPY (_bfd_generic),
  1314.   BFD_JUMP_TABLE_CORE (_bfd_nocore),
  1315.   BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive),
  1316.   BFD_JUMP_TABLE_SYMBOLS (srec),
  1317.   BFD_JUMP_TABLE_RELOCS (_bfd_norelocs),
  1318.   BFD_JUMP_TABLE_WRITE (srec),
  1319.   BFD_JUMP_TABLE_LINK (srec),
  1320.   BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
  1321.  
  1322.   NULL,
  1323.  
  1324.   NULL
  1325. };
  1326.  
  1327. const bfd_target symbolsrec_vec =
  1328. {
  1329.   "symbolsrec",                 /* Name.  */
  1330.   bfd_target_srec_flavour,
  1331.   BFD_ENDIAN_UNKNOWN,           /* Target byte order.  */
  1332.   BFD_ENDIAN_UNKNOWN,           /* Target headers byte order.  */
  1333.   (HAS_RELOC | EXEC_P |         /* Object flags.  */
  1334.    HAS_LINENO | HAS_DEBUG |
  1335.    HAS_SYMS | HAS_LOCALS | WP_TEXT | D_PAGED),
  1336.   (SEC_CODE | SEC_DATA | SEC_ROM | SEC_HAS_CONTENTS
  1337.    | SEC_ALLOC | SEC_LOAD | SEC_RELOC), /* Section flags.  */
  1338.   0,                            /* Leading underscore.  */
  1339.   ' ',                          /* AR_pad_char.  */
  1340.   16,                           /* AR_max_namelen.  */
  1341.   0,                            /* match priority.  */
  1342.   bfd_getb64, bfd_getb_signed_64, bfd_putb64,
  1343.   bfd_getb32, bfd_getb_signed_32, bfd_putb32,
  1344.   bfd_getb16, bfd_getb_signed_16, bfd_putb16,   /* Data.  */
  1345.   bfd_getb64, bfd_getb_signed_64, bfd_putb64,
  1346.   bfd_getb32, bfd_getb_signed_32, bfd_putb32,
  1347.   bfd_getb16, bfd_getb_signed_16, bfd_putb16,   /* Headers.  */
  1348.  
  1349.   {
  1350.     _bfd_dummy_target,
  1351.     symbolsrec_object_p,        /* bfd_check_format.  */
  1352.     _bfd_dummy_target,
  1353.     _bfd_dummy_target,
  1354.   },
  1355.   {
  1356.     bfd_false,
  1357.     srec_mkobject,
  1358.     _bfd_generic_mkarchive,
  1359.     bfd_false,
  1360.   },
  1361.   {                             /* bfd_write_contents.  */
  1362.     bfd_false,
  1363.     symbolsrec_write_object_contents,
  1364.     _bfd_write_archive_contents,
  1365.     bfd_false,
  1366.   },
  1367.  
  1368.   BFD_JUMP_TABLE_GENERIC (srec),
  1369.   BFD_JUMP_TABLE_COPY (_bfd_generic),
  1370.   BFD_JUMP_TABLE_CORE (_bfd_nocore),
  1371.   BFD_JUMP_TABLE_ARCHIVE (_bfd_noarchive),
  1372.   BFD_JUMP_TABLE_SYMBOLS (srec),
  1373.   BFD_JUMP_TABLE_RELOCS (_bfd_norelocs),
  1374.   BFD_JUMP_TABLE_WRITE (srec),
  1375.   BFD_JUMP_TABLE_LINK (srec),
  1376.   BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic),
  1377.  
  1378.   NULL,
  1379.  
  1380.   NULL
  1381. };
  1382.