Subversion Repositories Kolibri OS

Rev

Blame | Last modification | View Log | RSS feed

  1. /***************************************************************************/
  2. /*                                                                         */
  3. /*  ftoption.h                                                             */
  4. /*                                                                         */
  5. /*    User-selectable configuration macros (specification only).           */
  6. /*                                                                         */
  7. /*  Copyright 1996-2013 by                                                 */
  8. /*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
  9. /*                                                                         */
  10. /*  This file is part of the FreeType project, and may only be used,       */
  11. /*  modified, and distributed under the terms of the FreeType project      */
  12. /*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
  13. /*  this file you indicate that you have read the license and              */
  14. /*  understand and accept it fully.                                        */
  15. /*                                                                         */
  16. /***************************************************************************/
  17.  
  18.  
  19. #ifndef __FTOPTION_H__
  20. #define __FTOPTION_H__
  21.  
  22.  
  23. #include <ft2build.h>
  24.  
  25.  
  26. FT_BEGIN_HEADER
  27.  
  28.   /*************************************************************************/
  29.   /*                                                                       */
  30.   /*                 USER-SELECTABLE CONFIGURATION MACROS                  */
  31.   /*                                                                       */
  32.   /* This file contains the default configuration macro definitions for    */
  33.   /* a standard build of the FreeType library.  There are three ways to    */
  34.   /* use this file to build project-specific versions of the library:      */
  35.   /*                                                                       */
  36.   /*  - You can modify this file by hand, but this is not recommended in   */
  37.   /*    cases where you would like to build several versions of the        */
  38.   /*    library from a single source directory.                            */
  39.   /*                                                                       */
  40.   /*  - You can put a copy of this file in your build directory, more      */
  41.   /*    precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD'   */
  42.   /*    is the name of a directory that is included _before_ the FreeType  */
  43.   /*    include path during compilation.                                   */
  44.   /*                                                                       */
  45.   /*    The default FreeType Makefiles and Jamfiles use the build          */
  46.   /*    directory `builds/<system>' by default, but you can easily change  */
  47.   /*    that for your own projects.                                        */
  48.   /*                                                                       */
  49.   /*  - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it    */
  50.   /*    slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to       */
  51.   /*    locate this file during the build.  For example,                   */
  52.   /*                                                                       */
  53.   /*      #define FT_CONFIG_OPTIONS_H  <myftoptions.h>                     */
  54.   /*      #include <freetype/config/ftheader.h>                            */
  55.   /*                                                                       */
  56.   /*    will use `$BUILD/myftoptions.h' instead of this file for macro     */
  57.   /*    definitions.                                                       */
  58.   /*                                                                       */
  59.   /*    Note also that you can similarly pre-define the macro              */
  60.   /*    FT_CONFIG_MODULES_H used to locate the file listing of the modules */
  61.   /*    that are statically linked to the library at compile time.  By     */
  62.   /*    default, this file is <freetype/config/ftmodule.h>.                */
  63.   /*                                                                       */
  64.   /*  We highly recommend using the third method whenever possible.        */
  65.   /*                                                                       */
  66.   /*************************************************************************/
  67.  
  68.  
  69.   /*************************************************************************/
  70.   /*************************************************************************/
  71.   /****                                                                 ****/
  72.   /**** G E N E R A L   F R E E T Y P E   2   C O N F I G U R A T I O N ****/
  73.   /****                                                                 ****/
  74.   /*************************************************************************/
  75.   /*************************************************************************/
  76.  
  77.  
  78.   /*************************************************************************/
  79.   /*                                                                       */
  80.   /* Uncomment the line below if you want to activate sub-pixel rendering  */
  81.   /* (a.k.a. LCD rendering, or ClearType) in this build of the library.    */
  82.   /*                                                                       */
  83.   /* Note that this feature is covered by several Microsoft patents        */
  84.   /* and should not be activated in any default build of the library.      */
  85.   /*                                                                       */
  86.   /* This macro has no impact on the FreeType API, only on its             */
  87.   /* _implementation_.  For example, using FT_RENDER_MODE_LCD when calling */
  88.   /* FT_Render_Glyph still generates a bitmap that is 3 times wider than   */
  89.   /* the original size in case this macro isn't defined; however, each     */
  90.   /* triplet of subpixels has R=G=B.                                       */
  91.   /*                                                                       */
  92.   /* This is done to allow FreeType clients to run unmodified, forcing     */
  93.   /* them to display normal gray-level anti-aliased glyphs.                */
  94.   /*                                                                       */
  95. /* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
  96.  
  97.  
  98.   /*************************************************************************/
  99.   /*                                                                       */
  100.   /* Many compilers provide a non-ANSI 64-bit data type that can be used   */
  101.   /* by FreeType to speed up some computations.  However, this will create */
  102.   /* some problems when compiling the library in strict ANSI mode.         */
  103.   /*                                                                       */
  104.   /* For this reason, the use of 64-bit integers is normally disabled when */
  105.   /* the __STDC__ macro is defined.  You can however disable this by       */
  106.   /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here.                 */
  107.   /*                                                                       */
  108.   /* For most compilers, this will only create compilation warnings when   */
  109.   /* building the library.                                                 */
  110.   /*                                                                       */
  111.   /* ObNote: The compiler-specific 64-bit integers are detected in the     */
  112.   /*         file `ftconfig.h' either statically or through the            */
  113.   /*         `configure' script on supported platforms.                    */
  114.   /*                                                                       */
  115. #undef FT_CONFIG_OPTION_FORCE_INT64
  116.  
  117.  
  118.   /*************************************************************************/
  119.   /*                                                                       */
  120.   /* If this macro is defined, do not try to use an assembler version of   */
  121.   /* performance-critical functions (e.g. FT_MulFix).  You should only do  */
  122.   /* that to verify that the assembler function works properly, or to      */
  123.   /* execute benchmark tests of the various implementations.               */
  124. /* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
  125.  
  126.  
  127.   /*************************************************************************/
  128.   /*                                                                       */
  129.   /* If this macro is defined, try to use an inlined assembler version of  */
  130.   /* the `FT_MulFix' function, which is a `hotspot' when loading and       */
  131.   /* hinting glyphs, and which should be executed as fast as possible.     */
  132.   /*                                                                       */
  133.   /* Note that if your compiler or CPU is not supported, this will default */
  134.   /* to the standard and portable implementation found in `ftcalc.c'.      */
  135.   /*                                                                       */
  136. #define FT_CONFIG_OPTION_INLINE_MULFIX
  137.  
  138.  
  139.   /*************************************************************************/
  140.   /*                                                                       */
  141.   /* LZW-compressed file support.                                          */
  142.   /*                                                                       */
  143.   /*   FreeType now handles font files that have been compressed with the  */
  144.   /*   `compress' program.  This is mostly used to parse many of the PCF   */
  145.   /*   files that come with various X11 distributions.  The implementation */
  146.   /*   uses NetBSD's `zopen' to partially uncompress the file on the fly   */
  147.   /*   (see src/lzw/ftgzip.c).                                             */
  148.   /*                                                                       */
  149.   /*   Define this macro if you want to enable this `feature'.             */
  150.   /*                                                                       */
  151. #define FT_CONFIG_OPTION_USE_LZW
  152.  
  153.  
  154.   /*************************************************************************/
  155.   /*                                                                       */
  156.   /* Gzip-compressed file support.                                         */
  157.   /*                                                                       */
  158.   /*   FreeType now handles font files that have been compressed with the  */
  159.   /*   `gzip' program.  This is mostly used to parse many of the PCF files */
  160.   /*   that come with XFree86.  The implementation uses `zlib' to          */
  161.   /*   partially uncompress the file on the fly (see src/gzip/ftgzip.c).   */
  162.   /*                                                                       */
  163.   /*   Define this macro if you want to enable this `feature'.  See also   */
  164.   /*   the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below.                       */
  165.   /*                                                                       */
  166. #define FT_CONFIG_OPTION_USE_ZLIB
  167.  
  168.  
  169.   /*************************************************************************/
  170.   /*                                                                       */
  171.   /* ZLib library selection                                                */
  172.   /*                                                                       */
  173.   /*   This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined.  */
  174.   /*   It allows FreeType's `ftgzip' component to link to the system's     */
  175.   /*   installation of the ZLib library.  This is useful on systems like   */
  176.   /*   Unix or VMS where it generally is already available.                */
  177.   /*                                                                       */
  178.   /*   If you let it undefined, the component will use its own copy        */
  179.   /*   of the zlib sources instead.  These have been modified to be        */
  180.   /*   included directly within the component and *not* export external    */
  181.   /*   function names.  This allows you to link any program with FreeType  */
  182.   /*   _and_ ZLib without linking conflicts.                               */
  183.   /*                                                                       */
  184.   /*   Do not #undef this macro here since the build system might define   */
  185.   /*   it for certain configurations only.                                 */
  186.   /*                                                                       */
  187. /* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
  188.  
  189.  
  190.   /*************************************************************************/
  191.   /*                                                                       */
  192.   /* Bzip2-compressed file support.                                        */
  193.   /*                                                                       */
  194.   /*   FreeType now handles font files that have been compressed with the  */
  195.   /*   `bzip2' program.  This is mostly used to parse many of the PCF      */
  196.   /*   files that come with XFree86.  The implementation uses `libbz2' to  */
  197.   /*   partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
  198.   /*   Contrary to gzip, bzip2 currently is not included and need to use   */
  199.   /*   the system available bzip2 implementation.                          */
  200.   /*                                                                       */
  201.   /*   Define this macro if you want to enable this `feature'.             */
  202.   /*                                                                       */
  203. /* #define FT_CONFIG_OPTION_USE_BZIP2 */
  204.  
  205.  
  206.   /*************************************************************************/
  207.   /*                                                                       */
  208.   /* Define to disable the use of file stream functions and types, FILE,   */
  209.   /* fopen() etc.  Enables the use of smaller system libraries on embedded */
  210.   /* systems that have multiple system libraries, some with or without     */
  211.   /* file stream support, in the cases where file stream support is not    */
  212.   /* necessary such as memory loading of font files.                       */
  213.   /*                                                                       */
  214. /* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
  215.  
  216.  
  217.   /*************************************************************************/
  218.   /*                                                                       */
  219.   /*  PNG bitmap support.                                                  */
  220.   /*                                                                       */
  221.   /*   FreeType now handles loading color bitmap glyphs in the PNG format. */
  222.   /*   This requires help from the external libpng library.  Uncompressed  */
  223.   /*   color bitmaps do not need any external libraries and will be        */
  224.   /*   supported regardless of this configuration.                         */
  225.   /*                                                                       */
  226.   /*   Define this macro if you want to enable this `feature'.             */
  227.   /*                                                                       */
  228. /* #define FT_CONFIG_OPTION_USE_PNG */
  229.  
  230.  
  231.   /*************************************************************************/
  232.   /*                                                                       */
  233.   /* DLL export compilation                                                */
  234.   /*                                                                       */
  235.   /*   When compiling FreeType as a DLL, some systems/compilers need a     */
  236.   /*   special keyword in front OR after the return type of function       */
  237.   /*   declarations.                                                       */
  238.   /*                                                                       */
  239.   /*   Two macros are used within the FreeType source code to define       */
  240.   /*   exported library functions: FT_EXPORT and FT_EXPORT_DEF.            */
  241.   /*                                                                       */
  242.   /*     FT_EXPORT( return_type )                                          */
  243.   /*                                                                       */
  244.   /*       is used in a function declaration, as in                        */
  245.   /*                                                                       */
  246.   /*         FT_EXPORT( FT_Error )                                         */
  247.   /*         FT_Init_FreeType( FT_Library*  alibrary );                    */
  248.   /*                                                                       */
  249.   /*                                                                       */
  250.   /*     FT_EXPORT_DEF( return_type )                                      */
  251.   /*                                                                       */
  252.   /*       is used in a function definition, as in                         */
  253.   /*                                                                       */
  254.   /*         FT_EXPORT_DEF( FT_Error )                                     */
  255.   /*         FT_Init_FreeType( FT_Library*  alibrary )                     */
  256.   /*         {                                                             */
  257.   /*           ... some code ...                                           */
  258.   /*           return FT_Err_Ok;                                           */
  259.   /*         }                                                             */
  260.   /*                                                                       */
  261.   /*   You can provide your own implementation of FT_EXPORT and            */
  262.   /*   FT_EXPORT_DEF here if you want.  If you leave them undefined, they  */
  263.   /*   will be later automatically defined as `extern return_type' to      */
  264.   /*   allow normal compilation.                                           */
  265.   /*                                                                       */
  266.   /*   Do not #undef these macros here since the build system might define */
  267.   /*   them for certain configurations only.                               */
  268.   /*                                                                       */
  269. /* #define FT_EXPORT(x)      extern x */
  270. /* #define FT_EXPORT_DEF(x)  x */
  271.  
  272.  
  273.   /*************************************************************************/
  274.   /*                                                                       */
  275.   /* Glyph Postscript Names handling                                       */
  276.   /*                                                                       */
  277.   /*   By default, FreeType 2 is compiled with the `psnames' module.  This */
  278.   /*   module is in charge of converting a glyph name string into a        */
  279.   /*   Unicode value, or return a Macintosh standard glyph name for the    */
  280.   /*   use with the TrueType `post' table.                                 */
  281.   /*                                                                       */
  282.   /*   Undefine this macro if you do not want `psnames' compiled in your   */
  283.   /*   build of FreeType.  This has the following effects:                 */
  284.   /*                                                                       */
  285.   /*   - The TrueType driver will provide its own set of glyph names,      */
  286.   /*     if you build it to support postscript names in the TrueType       */
  287.   /*     `post' table.                                                     */
  288.   /*                                                                       */
  289.   /*   - The Type 1 driver will not be able to synthesize a Unicode        */
  290.   /*     charmap out of the glyphs found in the fonts.                     */
  291.   /*                                                                       */
  292.   /*   You would normally undefine this configuration macro when building  */
  293.   /*   a version of FreeType that doesn't contain a Type 1 or CFF driver.  */
  294.   /*                                                                       */
  295. #define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
  296.  
  297.  
  298.   /*************************************************************************/
  299.   /*                                                                       */
  300.   /* Postscript Names to Unicode Values support                            */
  301.   /*                                                                       */
  302.   /*   By default, FreeType 2 is built with the `PSNames' module compiled  */
  303.   /*   in.  Among other things, the module is used to convert a glyph name */
  304.   /*   into a Unicode value.  This is especially useful in order to        */
  305.   /*   synthesize on the fly a Unicode charmap from the CFF/Type 1 driver  */
  306.   /*   through a big table named the `Adobe Glyph List' (AGL).             */
  307.   /*                                                                       */
  308.   /*   Undefine this macro if you do not want the Adobe Glyph List         */
  309.   /*   compiled in your `PSNames' module.  The Type 1 driver will not be   */
  310.   /*   able to synthesize a Unicode charmap out of the glyphs found in the */
  311.   /*   fonts.                                                              */
  312.   /*                                                                       */
  313. #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
  314.  
  315.  
  316.   /*************************************************************************/
  317.   /*                                                                       */
  318.   /* Support for Mac fonts                                                 */
  319.   /*                                                                       */
  320.   /*   Define this macro if you want support for outline fonts in Mac      */
  321.   /*   format (mac dfont, mac resource, macbinary containing a mac         */
  322.   /*   resource) on non-Mac platforms.                                     */
  323.   /*                                                                       */
  324.   /*   Note that the `FOND' resource isn't checked.                        */
  325.   /*                                                                       */
  326. #define FT_CONFIG_OPTION_MAC_FONTS
  327.  
  328.  
  329.   /*************************************************************************/
  330.   /*                                                                       */
  331.   /* Guessing methods to access embedded resource forks                    */
  332.   /*                                                                       */
  333.   /*   Enable extra Mac fonts support on non-Mac platforms (e.g.           */
  334.   /*   GNU/Linux).                                                         */
  335.   /*                                                                       */
  336.   /*   Resource forks which include fonts data are stored sometimes in     */
  337.   /*   locations which users or developers don't expected.  In some cases, */
  338.   /*   resource forks start with some offset from the head of a file.  In  */
  339.   /*   other cases, the actual resource fork is stored in file different   */
  340.   /*   from what the user specifies.  If this option is activated,         */
  341.   /*   FreeType tries to guess whether such offsets or different file      */
  342.   /*   names must be used.                                                 */
  343.   /*                                                                       */
  344.   /*   Note that normal, direct access of resource forks is controlled via */
  345.   /*   the FT_CONFIG_OPTION_MAC_FONTS option.                              */
  346.   /*                                                                       */
  347. #ifdef FT_CONFIG_OPTION_MAC_FONTS
  348. #define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
  349. #endif
  350.  
  351.  
  352.   /*************************************************************************/
  353.   /*                                                                       */
  354.   /* Allow the use of FT_Incremental_Interface to load typefaces that      */
  355.   /* contain no glyph data, but supply it via a callback function.         */
  356.   /* This is required by clients supporting document formats which         */
  357.   /* supply font data incrementally as the document is parsed, such        */
  358.   /* as the Ghostscript interpreter for the PostScript language.           */
  359.   /*                                                                       */
  360. #define FT_CONFIG_OPTION_INCREMENTAL
  361.  
  362.  
  363.   /*************************************************************************/
  364.   /*                                                                       */
  365.   /* The size in bytes of the render pool used by the scan-line converter  */
  366.   /* to do all of its work.                                                */
  367.   /*                                                                       */
  368.   /* This must be greater than 4KByte if you use FreeType to rasterize     */
  369.   /* glyphs; otherwise, you may set it to zero to avoid unnecessary        */
  370.   /* allocation of the render pool.                                        */
  371.   /*                                                                       */
  372. #define FT_RENDER_POOL_SIZE  16384L
  373.  
  374.  
  375.   /*************************************************************************/
  376.   /*                                                                       */
  377.   /* FT_MAX_MODULES                                                        */
  378.   /*                                                                       */
  379.   /*   The maximum number of modules that can be registered in a single    */
  380.   /*   FreeType library object.  32 is the default.                        */
  381.   /*                                                                       */
  382. #define FT_MAX_MODULES  32
  383.  
  384.  
  385.   /*************************************************************************/
  386.   /*                                                                       */
  387.   /* Debug level                                                           */
  388.   /*                                                                       */
  389.   /*   FreeType can be compiled in debug or trace mode.  In debug mode,    */
  390.   /*   errors are reported through the `ftdebug' component.  In trace      */
  391.   /*   mode, additional messages are sent to the standard output during    */
  392.   /*   execution.                                                          */
  393.   /*                                                                       */
  394.   /*   Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode.     */
  395.   /*   Define FT_DEBUG_LEVEL_TRACE to build it in trace mode.              */
  396.   /*                                                                       */
  397.   /*   Don't define any of these macros to compile in `release' mode!      */
  398.   /*                                                                       */
  399.   /*   Do not #undef these macros here since the build system might define */
  400.   /*   them for certain configurations only.                               */
  401.   /*                                                                       */
  402. /* #define FT_DEBUG_LEVEL_ERROR */
  403. /* #define FT_DEBUG_LEVEL_TRACE */
  404.  
  405.  
  406.   /*************************************************************************/
  407.   /*                                                                       */
  408.   /* Autofitter debugging                                                  */
  409.   /*                                                                       */
  410.   /*   If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to     */
  411.   /*   control the autofitter behaviour for debugging purposes with global */
  412.   /*   boolean variables (consequently, you should *never* enable this     */
  413.   /*   while compiling in `release' mode):                                 */
  414.   /*                                                                       */
  415.   /*     _af_debug_disable_horz_hints                                      */
  416.   /*     _af_debug_disable_vert_hints                                      */
  417.   /*     _af_debug_disable_blue_hints                                      */
  418.   /*                                                                       */
  419.   /*   Additionally, the following functions provide dumps of various      */
  420.   /*   internal autofit structures to stdout (using `printf'):             */
  421.   /*                                                                       */
  422.   /*     af_glyph_hints_dump_points                                        */
  423.   /*     af_glyph_hints_dump_segments                                      */
  424.   /*     af_glyph_hints_dump_edges                                         */
  425.   /*                                                                       */
  426.   /*   As an argument, they use another global variable:                   */
  427.   /*                                                                       */
  428.   /*     _af_debug_hints                                                   */
  429.   /*                                                                       */
  430.   /*   Please have a look at the `ftgrid' demo program to see how those    */
  431.   /*   variables and macros should be used.                                */
  432.   /*                                                                       */
  433.   /*   Do not #undef these macros here since the build system might define */
  434.   /*   them for certain configurations only.                               */
  435.   /*                                                                       */
  436. /* #define FT_DEBUG_AUTOFIT */
  437.  
  438.  
  439.   /*************************************************************************/
  440.   /*                                                                       */
  441.   /* Memory Debugging                                                      */
  442.   /*                                                                       */
  443.   /*   FreeType now comes with an integrated memory debugger that is       */
  444.   /*   capable of detecting simple errors like memory leaks or double      */
  445.   /*   deletes.  To compile it within your build of the library, you       */
  446.   /*   should define FT_DEBUG_MEMORY here.                                 */
  447.   /*                                                                       */
  448.   /*   Note that the memory debugger is only activated at runtime when     */
  449.   /*   when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
  450.   /*                                                                       */
  451.   /*   Do not #undef this macro here since the build system might define   */
  452.   /*   it for certain configurations only.                                 */
  453.   /*                                                                       */
  454. /* #define FT_DEBUG_MEMORY */
  455.  
  456.  
  457.   /*************************************************************************/
  458.   /*                                                                       */
  459.   /* Module errors                                                         */
  460.   /*                                                                       */
  461.   /*   If this macro is set (which is _not_ the default), the higher byte  */
  462.   /*   of an error code gives the module in which the error has occurred,  */
  463.   /*   while the lower byte is the real error code.                        */
  464.   /*                                                                       */
  465.   /*   Setting this macro makes sense for debugging purposes only, since   */
  466.   /*   it would break source compatibility of certain programs that use    */
  467.   /*   FreeType 2.                                                         */
  468.   /*                                                                       */
  469.   /*   More details can be found in the files ftmoderr.h and fterrors.h.   */
  470.   /*                                                                       */
  471. #undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
  472.  
  473.  
  474.   /*************************************************************************/
  475.   /*                                                                       */
  476.   /* Position Independent Code                                             */
  477.   /*                                                                       */
  478.   /*   If this macro is set (which is _not_ the default), FreeType2 will   */
  479.   /*   avoid creating constants that require address fixups.  Instead the  */
  480.   /*   constants will be moved into a struct and additional intialization  */
  481.   /*   code will be used.                                                  */
  482.   /*                                                                       */
  483.   /*   Setting this macro is needed for systems that prohibit address      */
  484.   /*   fixups, such as BREW.                                               */
  485.   /*                                                                       */
  486. /* #define FT_CONFIG_OPTION_PIC */
  487.  
  488.  
  489.   /*************************************************************************/
  490.   /*************************************************************************/
  491.   /****                                                                 ****/
  492.   /****        S F N T   D R I V E R    C O N F I G U R A T I O N       ****/
  493.   /****                                                                 ****/
  494.   /*************************************************************************/
  495.   /*************************************************************************/
  496.  
  497.  
  498.   /*************************************************************************/
  499.   /*                                                                       */
  500.   /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support       */
  501.   /* embedded bitmaps in all formats using the SFNT module (namely         */
  502.   /* TrueType & OpenType).                                                 */
  503.   /*                                                                       */
  504. #define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
  505.  
  506.  
  507.   /*************************************************************************/
  508.   /*                                                                       */
  509.   /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to    */
  510.   /* load and enumerate the glyph Postscript names in a TrueType or        */
  511.   /* OpenType file.                                                        */
  512.   /*                                                                       */
  513.   /* Note that when you do not compile the `PSNames' module by undefining  */
  514.   /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will   */
  515.   /* contain additional code used to read the PS Names table from a font.  */
  516.   /*                                                                       */
  517.   /* (By default, the module uses `PSNames' to extract glyph names.)       */
  518.   /*                                                                       */
  519. #define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
  520.  
  521.  
  522.   /*************************************************************************/
  523.   /*                                                                       */
  524.   /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to       */
  525.   /* access the internal name table in a SFNT-based format like TrueType   */
  526.   /* or OpenType.  The name table contains various strings used to         */
  527.   /* describe the font, like family name, copyright, version, etc.  It     */
  528.   /* does not contain any glyph name though.                               */
  529.   /*                                                                       */
  530.   /* Accessing SFNT names is done through the functions declared in        */
  531.   /* `freetype/ftsnames.h'.                                                */
  532.   /*                                                                       */
  533. #define TT_CONFIG_OPTION_SFNT_NAMES
  534.  
  535.  
  536.   /*************************************************************************/
  537.   /*                                                                       */
  538.   /* TrueType CMap support                                                 */
  539.   /*                                                                       */
  540.   /*   Here you can fine-tune which TrueType CMap table format shall be    */
  541.   /*   supported.                                                          */
  542. #define TT_CONFIG_CMAP_FORMAT_0
  543. #define TT_CONFIG_CMAP_FORMAT_2
  544. #define TT_CONFIG_CMAP_FORMAT_4
  545. #define TT_CONFIG_CMAP_FORMAT_6
  546. #define TT_CONFIG_CMAP_FORMAT_8
  547. #define TT_CONFIG_CMAP_FORMAT_10
  548. #define TT_CONFIG_CMAP_FORMAT_12
  549. #define TT_CONFIG_CMAP_FORMAT_13
  550. #define TT_CONFIG_CMAP_FORMAT_14
  551.  
  552.  
  553.   /*************************************************************************/
  554.   /*************************************************************************/
  555.   /****                                                                 ****/
  556.   /****    T R U E T Y P E   D R I V E R    C O N F I G U R A T I O N   ****/
  557.   /****                                                                 ****/
  558.   /*************************************************************************/
  559.   /*************************************************************************/
  560.  
  561.   /*************************************************************************/
  562.   /*                                                                       */
  563.   /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile   */
  564.   /* a bytecode interpreter in the TrueType driver.                        */
  565.   /*                                                                       */
  566.   /* By undefining this, you will only compile the code necessary to load  */
  567.   /* TrueType glyphs without hinting.                                      */
  568.   /*                                                                       */
  569.   /*   Do not #undef this macro here, since the build system might         */
  570.   /*   define it for certain configurations only.                          */
  571.   /*                                                                       */
  572. #define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
  573.  
  574.  
  575.   /*************************************************************************/
  576.   /*                                                                       */
  577.   /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile       */
  578.   /* EXPERIMENTAL subpixel hinting support into the TrueType driver.  This */
  579.   /* replaces the native TrueType hinting mechanism when anything but      */
  580.   /* FT_RENDER_MODE_MONO is requested.                                     */
  581.   /*                                                                       */
  582.   /* Enabling this causes the TrueType driver to ignore instructions under */
  583.   /* certain conditions.  This is done in accordance with the guide here,  */
  584.   /* with some minor differences:                                          */
  585.   /*                                                                       */
  586.   /*  http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
  587.   /*                                                                       */
  588.   /* By undefining this, you only compile the code necessary to hint       */
  589.   /* TrueType glyphs with native TT hinting.                               */
  590.   /*                                                                       */
  591.   /*   This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be    */
  592.   /*   defined.                                                            */
  593.   /*                                                                       */
  594. /* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
  595.  
  596.  
  597.   /*************************************************************************/
  598.   /*                                                                       */
  599.   /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version  */
  600.   /* of the TrueType bytecode interpreter is used that doesn't implement   */
  601.   /* any of the patented opcodes and algorithms.  The patents related to   */
  602.   /* TrueType hinting have expired worldwide since May 2010; this option   */
  603.   /* is now deprecated.                                                    */
  604.   /*                                                                       */
  605.   /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored*  */
  606.   /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words,  */
  607.   /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or                */
  608.   /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time.    */
  609.   /*                                                                       */
  610.   /* This macro is only useful for a small number of font files (mostly    */
  611.   /* for Asian scripts) that require bytecode interpretation to properly   */
  612.   /* load glyphs.  For all other fonts, this produces unpleasant results,  */
  613.   /* thus the unpatented interpreter is never used to load glyphs from     */
  614.   /* TrueType fonts unless one of the following two options is used.       */
  615.   /*                                                                       */
  616.   /*   - The unpatented interpreter is explicitly activated by the user    */
  617.   /*     through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag         */
  618.   /*     when opening the FT_Face.                                         */
  619.   /*                                                                       */
  620.   /*   - FreeType detects that the FT_Face corresponds to one of the       */
  621.   /*     `trick' fonts (e.g., `Mingliu') it knows about.  The font engine  */
  622.   /*     contains a hard-coded list of font names and other matching       */
  623.   /*     parameters (see function `tt_face_init' in file                   */
  624.   /*     `src/truetype/ttobjs.c').                                         */
  625.   /*                                                                       */
  626.   /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
  627.   /*                                                                       */
  628.   /*   {                                                                   */
  629.   /*     FT_Parameter  parameter;                                          */
  630.   /*     FT_Open_Args  open_args;                                          */
  631.   /*                                                                       */
  632.   /*                                                                       */
  633.   /*     parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING;                  */
  634.   /*                                                                       */
  635.   /*     open_args.flags      = FT_OPEN_PATHNAME | FT_OPEN_PARAMS;         */
  636.   /*     open_args.pathname   = my_font_pathname;                          */
  637.   /*     open_args.num_params = 1;                                         */
  638.   /*     open_args.params     = &parameter;                                */
  639.   /*                                                                       */
  640.   /*     error = FT_Open_Face( library, &open_args, index, &face );        */
  641.   /*     ...                                                               */
  642.   /*   }                                                                   */
  643.   /*                                                                       */
  644. /* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
  645.  
  646.  
  647.   /*************************************************************************/
  648.   /*                                                                       */
  649.   /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType    */
  650.   /* bytecode interpreter with a huge switch statement, rather than a call */
  651.   /* table.  This results in smaller and faster code for a number of       */
  652.   /* architectures.                                                        */
  653.   /*                                                                       */
  654.   /* Note however that on some compiler/processor combinations, undefining */
  655.   /* this macro will generate faster, though larger, code.                 */
  656.   /*                                                                       */
  657. #define TT_CONFIG_OPTION_INTERPRETER_SWITCH
  658.  
  659.  
  660.   /*************************************************************************/
  661.   /*                                                                       */
  662.   /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the        */
  663.   /* TrueType glyph loader to use Apple's definition of how to handle      */
  664.   /* component offsets in composite glyphs.                                */
  665.   /*                                                                       */
  666.   /* Apple and MS disagree on the default behavior of component offsets    */
  667.   /* in composites.  Apple says that they should be scaled by the scaling  */
  668.   /* factors in the transformation matrix (roughly, it's more complex)     */
  669.   /* while MS says they should not.  OpenType defines two bits in the      */
  670.   /* composite flags array which can be used to disambiguate, but old      */
  671.   /* fonts will not have them.                                             */
  672.   /*                                                                       */
  673.   /*   http://www.microsoft.com/typography/otspec/glyf.htm                 */
  674.   /*   http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html                 */
  675.   /*                                                                       */
  676. #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
  677.  
  678.  
  679.   /*************************************************************************/
  680.   /*                                                                       */
  681.   /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include         */
  682.   /* support for Apple's distortable font technology (fvar, gvar, cvar,    */
  683.   /* and avar tables).  This has many similarities to Type 1 Multiple      */
  684.   /* Masters support.                                                      */
  685.   /*                                                                       */
  686. #define TT_CONFIG_OPTION_GX_VAR_SUPPORT
  687.  
  688.  
  689.   /*************************************************************************/
  690.   /*                                                                       */
  691.   /* Define TT_CONFIG_OPTION_BDF if you want to include support for        */
  692.   /* an embedded `BDF ' table within SFNT-based bitmap formats.            */
  693.   /*                                                                       */
  694. #define TT_CONFIG_OPTION_BDF
  695.  
  696.  
  697.   /*************************************************************************/
  698.   /*************************************************************************/
  699.   /****                                                                 ****/
  700.   /****      T Y P E 1   D R I V E R    C O N F I G U R A T I O N       ****/
  701.   /****                                                                 ****/
  702.   /*************************************************************************/
  703.   /*************************************************************************/
  704.  
  705.  
  706.   /*************************************************************************/
  707.   /*                                                                       */
  708.   /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and       */
  709.   /* arrays in the Type 1 stream (see t1load.c).  A minimum of 4 is        */
  710.   /* required.                                                             */
  711.   /*                                                                       */
  712. #define T1_MAX_DICT_DEPTH  5
  713.  
  714.  
  715.   /*************************************************************************/
  716.   /*                                                                       */
  717.   /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine   */
  718.   /* calls during glyph loading.                                           */
  719.   /*                                                                       */
  720. #define T1_MAX_SUBRS_CALLS  16
  721.  
  722.  
  723.   /*************************************************************************/
  724.   /*                                                                       */
  725.   /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity.  A     */
  726.   /* minimum of 16 is required.                                            */
  727.   /*                                                                       */
  728.   /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
  729.   /*                                                                       */
  730. #define T1_MAX_CHARSTRINGS_OPERANDS  256
  731.  
  732.  
  733.   /*************************************************************************/
  734.   /*                                                                       */
  735.   /* Define this configuration macro if you want to prevent the            */
  736.   /* compilation of `t1afm', which is in charge of reading Type 1 AFM      */
  737.   /* files into an existing face.  Note that if set, the T1 driver will be */
  738.   /* unable to produce kerning distances.                                  */
  739.   /*                                                                       */
  740. #undef T1_CONFIG_OPTION_NO_AFM
  741.  
  742.  
  743.   /*************************************************************************/
  744.   /*                                                                       */
  745.   /* Define this configuration macro if you want to prevent the            */
  746.   /* compilation of the Multiple Masters font support in the Type 1        */
  747.   /* driver.                                                               */
  748.   /*                                                                       */
  749. #undef T1_CONFIG_OPTION_NO_MM_SUPPORT
  750.  
  751.  
  752.   /*************************************************************************/
  753.   /*************************************************************************/
  754.   /****                                                                 ****/
  755.   /****         C F F   D R I V E R    C O N F I G U R A T I O N        ****/
  756.   /****                                                                 ****/
  757.   /*************************************************************************/
  758.   /*************************************************************************/
  759.  
  760.  
  761.   /*************************************************************************/
  762.   /*                                                                       */
  763.   /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF       */
  764.   /* engine gets compiled into FreeType.  If defined, it is possible to    */
  765.   /* switch between the two engines using the `hinting-engine' property of */
  766.   /* the cff driver module.                                                */
  767.   /*                                                                       */
  768. /* #define CFF_CONFIG_OPTION_OLD_ENGINE */
  769.  
  770.  
  771.   /*************************************************************************/
  772.   /*************************************************************************/
  773.   /****                                                                 ****/
  774.   /****    A U T O F I T   M O D U L E    C O N F I G U R A T I O N     ****/
  775.   /****                                                                 ****/
  776.   /*************************************************************************/
  777.   /*************************************************************************/
  778.  
  779.  
  780.   /*************************************************************************/
  781.   /*                                                                       */
  782.   /* Compile autofit module with CJK (Chinese, Japanese, Korean) script    */
  783.   /* support.                                                              */
  784.   /*                                                                       */
  785. #define AF_CONFIG_OPTION_CJK
  786.  
  787.   /*************************************************************************/
  788.   /*                                                                       */
  789.   /* Compile autofit module with Indic script support.                     */
  790.   /*                                                                       */
  791. #define AF_CONFIG_OPTION_INDIC
  792.  
  793.   /*************************************************************************/
  794.   /*                                                                       */
  795.   /* Compile autofit module with warp hinting.  The idea of the warping    */
  796.   /* code is to slightly scale and shift a glyph within a single dimension */
  797.   /* so that as much of its segments are aligned (more or less) on the     */
  798.   /* grid.  To find out the optimal scaling and shifting value, various    */
  799.   /* parameter combinations are tried and scored.                          */
  800.   /*                                                                       */
  801.   /* This experimental option is only active if the render mode is         */
  802.   /* FT_RENDER_MODE_LIGHT.                                                 */
  803.   /*                                                                       */
  804. /* #define AF_CONFIG_OPTION_USE_WARPER */
  805.  
  806.   /* */
  807.  
  808.  
  809.   /*
  810.    *  This macro is obsolete.  Support has been removed in FreeType
  811.    *  version 2.5.
  812.    */
  813. /* #define FT_CONFIG_OPTION_OLD_INTERNALS */
  814.  
  815.  
  816.   /*
  817.    * This macro is defined if either unpatented or native TrueType
  818.    * hinting is requested by the definitions above.
  819.    */
  820. #ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
  821. #define  TT_USE_BYTECODE_INTERPRETER
  822. #undef   TT_CONFIG_OPTION_UNPATENTED_HINTING
  823. #elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
  824. #define  TT_USE_BYTECODE_INTERPRETER
  825. #endif
  826.  
  827. FT_END_HEADER
  828.  
  829.  
  830. #endif /* __FTOPTION_H__ */
  831.  
  832.  
  833. /* END */
  834.