Subversion Repositories Kolibri OS

Rev

Go to most recent revision | Blame | Last modification | View Log | RSS feed

  1. /*
  2.  * Copyright (c) 2012
  3.  *      MIPS Technologies, Inc., California.
  4.  *
  5.  * Redistribution and use in source and binary forms, with or without
  6.  * modification, are permitted provided that the following conditions
  7.  * are met:
  8.  * 1. Redistributions of source code must retain the above copyright
  9.  *    notice, this list of conditions and the following disclaimer.
  10.  * 2. Redistributions in binary form must reproduce the above copyright
  11.  *    notice, this list of conditions and the following disclaimer in the
  12.  *    documentation and/or other materials provided with the distribution.
  13.  * 3. Neither the name of the MIPS Technologies, Inc., nor the names of its
  14.  *    contributors may be used to endorse or promote products derived from
  15.  *    this software without specific prior written permission.
  16.  *
  17.  * THIS SOFTWARE IS PROVIDED BY THE MIPS TECHNOLOGIES, INC. ``AS IS'' AND
  18.  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  19.  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  20.  * ARE DISCLAIMED.  IN NO EVENT SHALL THE MIPS TECHNOLOGIES, INC. BE LIABLE
  21.  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  22.  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  23.  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  24.  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  25.  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  26.  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  27.  * SUCH DAMAGE.
  28.  *
  29.  * Authors:  Darko Laus      (darko@mips.com)
  30.  *           Djordje Pesut   (djordje@mips.com)
  31.  *           Mirjana Vulin   (mvulin@mips.com)
  32.  *
  33.  * This file is part of FFmpeg.
  34.  *
  35.  * FFmpeg is free software; you can redistribute it and/or
  36.  * modify it under the terms of the GNU Lesser General Public
  37.  * License as published by the Free Software Foundation; either
  38.  * version 2.1 of the License, or (at your option) any later version.
  39.  *
  40.  * FFmpeg is distributed in the hope that it will be useful,
  41.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  42.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  43.  * Lesser General Public License for more details.
  44.  *
  45.  * You should have received a copy of the GNU Lesser General Public
  46.  * License along with FFmpeg; if not, write to the Free Software
  47.  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  48.  */
  49.  
  50. /**
  51.  * @file
  52.  * Reference: libavcodec/aacpsdsp.c
  53.  */
  54.  
  55. #include "config.h"
  56. #include "libavcodec/aacpsdsp.h"
  57.  
  58. #if HAVE_INLINE_ASM
  59. static void ps_hybrid_analysis_ileave_mips(float (*out)[32][2], float L[2][38][64],
  60.                                         int i, int len)
  61. {
  62.     int temp0, temp1, temp2, temp3;
  63.     int temp4, temp5, temp6, temp7;
  64.     float *out1=&out[i][0][0];
  65.     float *L1=&L[0][0][i];
  66.     float *j=out1+ len*2;
  67.  
  68.     for (; i < 64; i++) {
  69.  
  70.         /* loop unrolled 8 times */
  71.         __asm__ volatile (
  72.         "1:                                          \n\t"
  73.             "lw      %[temp0],   0(%[L1])            \n\t"
  74.             "lw      %[temp1],   9728(%[L1])         \n\t"
  75.             "lw      %[temp2],   256(%[L1])          \n\t"
  76.             "lw      %[temp3],   9984(%[L1])         \n\t"
  77.             "lw      %[temp4],   512(%[L1])          \n\t"
  78.             "lw      %[temp5],   10240(%[L1])        \n\t"
  79.             "lw      %[temp6],   768(%[L1])          \n\t"
  80.             "lw      %[temp7],   10496(%[L1])        \n\t"
  81.             "sw      %[temp0],   0(%[out1])          \n\t"
  82.             "sw      %[temp1],   4(%[out1])          \n\t"
  83.             "sw      %[temp2],   8(%[out1])          \n\t"
  84.             "sw      %[temp3],   12(%[out1])         \n\t"
  85.             "sw      %[temp4],   16(%[out1])         \n\t"
  86.             "sw      %[temp5],   20(%[out1])         \n\t"
  87.             "sw      %[temp6],   24(%[out1])         \n\t"
  88.             "sw      %[temp7],   28(%[out1])         \n\t"
  89.             "addiu   %[out1],    %[out1],      32    \n\t"
  90.             "addiu   %[L1],      %[L1],        1024  \n\t"
  91.             "bne     %[out1],    %[j],         1b    \n\t"
  92.  
  93.             : [out1]"+r"(out1), [L1]"+r"(L1), [j]"+r"(j),
  94.               [temp0]"=&r"(temp0), [temp1]"=&r"(temp1),
  95.               [temp2]"=&r"(temp2), [temp3]"=&r"(temp3),
  96.               [temp4]"=&r"(temp4), [temp5]"=&r"(temp5),
  97.               [temp6]"=&r"(temp6), [temp7]"=&r"(temp7)
  98.             : [len]"r"(len)
  99.             : "memory"
  100.         );
  101.         out1-=(len<<1)-64;
  102.         L1-=(len<<6)-1;
  103.         j+=len*2;
  104.     }
  105. }
  106.  
  107. static void ps_hybrid_synthesis_deint_mips(float out[2][38][64],
  108.                                         float (*in)[32][2],
  109.                                         int i, int len)
  110. {
  111.     int n;
  112.     int temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7;
  113.     float *out1 = (float*)out + i;
  114.     float *out2 = (float*)out + 2432 + i;
  115.     float *in1 = (float*)in + 64 * i;
  116.     float *in2 = (float*)in + 64 * i + 1;
  117.  
  118.     for (; i < 64; i++) {
  119.         for (n = 0; n < 7; n++) {
  120.  
  121.             /* loop unrolled 8 times */
  122.             __asm__ volatile (
  123.                  "lw      %[temp0],   0(%[in1])               \n\t"
  124.                  "lw      %[temp1],   0(%[in2])               \n\t"
  125.                  "lw      %[temp2],   8(%[in1])               \n\t"
  126.                  "lw      %[temp3],   8(%[in2])               \n\t"
  127.                  "lw      %[temp4],   16(%[in1])              \n\t"
  128.                  "lw      %[temp5],   16(%[in2])              \n\t"
  129.                  "lw      %[temp6],   24(%[in1])              \n\t"
  130.                  "lw      %[temp7],   24(%[in2])              \n\t"
  131.                  "addiu   %[out1],    %[out1],         1024   \n\t"
  132.                  "addiu   %[out2],    %[out2],         1024   \n\t"
  133.                  "addiu   %[in1],     %[in1],          32     \n\t"
  134.                  "addiu   %[in2],     %[in2],          32     \n\t"
  135.                  "sw      %[temp0],   -1024(%[out1])          \n\t"
  136.                  "sw      %[temp1],   -1024(%[out2])          \n\t"
  137.                  "sw      %[temp2],   -768(%[out1])           \n\t"
  138.                  "sw      %[temp3],   -768(%[out2])           \n\t"
  139.                  "sw      %[temp4],   -512(%[out1])           \n\t"
  140.                  "sw      %[temp5],   -512(%[out2])           \n\t"
  141.                  "sw      %[temp6],   -256(%[out1])           \n\t"
  142.                  "sw      %[temp7],   -256(%[out2])           \n\t"
  143.  
  144.                  : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1),
  145.                    [temp2]"=&r"(temp2), [temp3]"=&r"(temp3),
  146.                    [temp4]"=&r"(temp4), [temp5]"=&r"(temp5),
  147.                    [temp6]"=&r"(temp6), [temp7]"=&r"(temp7),
  148.                    [out1]"+r"(out1), [out2]"+r"(out2),
  149.                    [in1]"+r"(in1), [in2]"+r"(in2)
  150.                  :
  151.                  : "memory"
  152.             );
  153.         }
  154.         /* loop unrolled 8 times */
  155.         __asm__ volatile (
  156.             "lw      %[temp0],   0(%[in1])               \n\t"
  157.             "lw      %[temp1],   0(%[in2])               \n\t"
  158.             "lw      %[temp2],   8(%[in1])               \n\t"
  159.             "lw      %[temp3],   8(%[in2])               \n\t"
  160.             "lw      %[temp4],   16(%[in1])              \n\t"
  161.             "lw      %[temp5],   16(%[in2])              \n\t"
  162.             "lw      %[temp6],   24(%[in1])              \n\t"
  163.             "lw      %[temp7],   24(%[in2])              \n\t"
  164.             "addiu   %[out1],    %[out1],        -7164   \n\t"
  165.             "addiu   %[out2],    %[out2],        -7164   \n\t"
  166.             "addiu   %[in1],     %[in1],         32      \n\t"
  167.             "addiu   %[in2],     %[in2],         32      \n\t"
  168.             "sw      %[temp0],   7164(%[out1])           \n\t"
  169.             "sw      %[temp1],   7164(%[out2])           \n\t"
  170.             "sw      %[temp2],   7420(%[out1])           \n\t"
  171.             "sw      %[temp3],   7420(%[out2])           \n\t"
  172.             "sw      %[temp4],   7676(%[out1])           \n\t"
  173.             "sw      %[temp5],   7676(%[out2])           \n\t"
  174.             "sw      %[temp6],   7932(%[out1])           \n\t"
  175.             "sw      %[temp7],   7932(%[out2])           \n\t"
  176.  
  177.             : [temp0]"=&r"(temp0), [temp1]"=&r"(temp1),
  178.               [temp2]"=&r"(temp2), [temp3]"=&r"(temp3),
  179.               [temp4]"=&r"(temp4), [temp5]"=&r"(temp5),
  180.               [temp6]"=&r"(temp6), [temp7]"=&r"(temp7),
  181.               [out1]"+r"(out1), [out2]"+r"(out2),
  182.               [in1]"+r"(in1), [in2]"+r"(in2)
  183.             :
  184.             : "memory"
  185.         );
  186.     }
  187. }
  188.  
  189. #if HAVE_MIPSFPU
  190. static void ps_add_squares_mips(float *dst, const float (*src)[2], int n)
  191. {
  192.     int i;
  193.     float temp0, temp1, temp2, temp3, temp4, temp5;
  194.     float temp6, temp7, temp8, temp9, temp10, temp11;
  195.     float *src0 = (float*)&src[0][0];
  196.     float *dst0 = &dst[0];
  197.  
  198.     for (i = 0; i < 8; i++) {
  199.         /* loop unrolled 4 times */
  200.         __asm__ volatile (
  201.             "lwc1     %[temp0],    0(%[src0])                          \n\t"
  202.             "lwc1     %[temp1],    4(%[src0])                          \n\t"
  203.             "lwc1     %[temp2],    8(%[src0])                          \n\t"
  204.             "lwc1     %[temp3],    12(%[src0])                         \n\t"
  205.             "lwc1     %[temp4],    16(%[src0])                         \n\t"
  206.             "lwc1     %[temp5],    20(%[src0])                         \n\t"
  207.             "lwc1     %[temp6],    24(%[src0])                         \n\t"
  208.             "lwc1     %[temp7],    28(%[src0])                         \n\t"
  209.             "lwc1     %[temp8],    0(%[dst0])                          \n\t"
  210.             "lwc1     %[temp9],    4(%[dst0])                          \n\t"
  211.             "lwc1     %[temp10],   8(%[dst0])                          \n\t"
  212.             "lwc1     %[temp11],   12(%[dst0])                         \n\t"
  213.             "mul.s    %[temp1],    %[temp1],    %[temp1]               \n\t"
  214.             "mul.s    %[temp3],    %[temp3],    %[temp3]               \n\t"
  215.             "mul.s    %[temp5],    %[temp5],    %[temp5]               \n\t"
  216.             "mul.s    %[temp7],    %[temp7],    %[temp7]               \n\t"
  217.             "madd.s   %[temp0],    %[temp1],    %[temp0],   %[temp0]   \n\t"
  218.             "madd.s   %[temp2],    %[temp3],    %[temp2],   %[temp2]   \n\t"
  219.             "madd.s   %[temp4],    %[temp5],    %[temp4],   %[temp4]   \n\t"
  220.             "madd.s   %[temp6],    %[temp7],    %[temp6],   %[temp6]   \n\t"
  221.             "add.s    %[temp0],    %[temp8],    %[temp0]               \n\t"
  222.             "add.s    %[temp2],    %[temp9],    %[temp2]               \n\t"
  223.             "add.s    %[temp4],    %[temp10],   %[temp4]               \n\t"
  224.             "add.s    %[temp6],    %[temp11],   %[temp6]               \n\t"
  225.             "swc1     %[temp0],    0(%[dst0])                          \n\t"
  226.             "swc1     %[temp2],    4(%[dst0])                          \n\t"
  227.             "swc1     %[temp4],    8(%[dst0])                          \n\t"
  228.             "swc1     %[temp6],    12(%[dst0])                         \n\t"
  229.             "addiu    %[dst0],     %[dst0],     16                     \n\t"
  230.             "addiu    %[src0],     %[src0],     32                     \n\t"
  231.  
  232.             : [temp0]"=&f"(temp0), [temp1]"=&f"(temp1), [temp2]"=&f"(temp2),
  233.               [temp3]"=&f"(temp3), [temp4]"=&f"(temp4), [temp5]"=&f"(temp5),
  234.               [temp6]"=&f"(temp6), [temp7]"=&f"(temp7), [temp8]"=&f"(temp8),
  235.               [temp9]"=&f"(temp9), [dst0]"+r"(dst0), [src0]"+r"(src0),
  236.               [temp10]"=&f"(temp10), [temp11]"=&f"(temp11)
  237.             :
  238.             : "memory"
  239.         );
  240.    }
  241. }
  242.  
  243. static void ps_mul_pair_single_mips(float (*dst)[2], float (*src0)[2], float *src1,
  244.                                  int n)
  245. {
  246.     float temp0, temp1, temp2;
  247.     float *p_d, *p_s0, *p_s1, *end;
  248.     p_d = &dst[0][0];
  249.     p_s0 = &src0[0][0];
  250.     p_s1 = &src1[0];
  251.     end = p_s1 + n;
  252.  
  253.     __asm__ volatile(
  254.         ".set push                                      \n\t"
  255.         ".set noreorder                                 \n\t"
  256.         "1:                                             \n\t"
  257.         "lwc1     %[temp2],   0(%[p_s1])                \n\t"
  258.         "lwc1     %[temp0],   0(%[p_s0])                \n\t"
  259.         "lwc1     %[temp1],   4(%[p_s0])                \n\t"
  260.         "addiu    %[p_d],     %[p_d],       8           \n\t"
  261.         "mul.s    %[temp0],   %[temp0],     %[temp2]    \n\t"
  262.         "mul.s    %[temp1],   %[temp1],     %[temp2]    \n\t"
  263.         "addiu    %[p_s0],    %[p_s0],      8           \n\t"
  264.         "swc1     %[temp0],   -8(%[p_d])                \n\t"
  265.         "swc1     %[temp1],   -4(%[p_d])                \n\t"
  266.         "bne      %[p_s1],    %[end],       1b          \n\t"
  267.         " addiu   %[p_s1],    %[p_s1],      4           \n\t"
  268.         ".set pop                                       \n\t"
  269.  
  270.         : [temp0]"=&f"(temp0), [temp1]"=&f"(temp1),
  271.           [temp2]"=&f"(temp2), [p_d]"+r"(p_d),
  272.           [p_s0]"+r"(p_s0), [p_s1]"+r"(p_s1)
  273.         : [end]"r"(end)
  274.         : "memory"
  275.     );
  276. }
  277.  
  278. static void ps_decorrelate_mips(float (*out)[2], float (*delay)[2],
  279.                              float (*ap_delay)[PS_QMF_TIME_SLOTS + PS_MAX_AP_DELAY][2],
  280.                              const float phi_fract[2], float (*Q_fract)[2],
  281.                              const float *transient_gain,
  282.                              float g_decay_slope,
  283.                              int len)
  284. {
  285.     float *p_delay = &delay[0][0];
  286.     float *p_out = &out[0][0];
  287.     float *p_ap_delay = &ap_delay[0][0][0];
  288.     float *p_t_gain = (float*)transient_gain;
  289.     float *p_Q_fract = &Q_fract[0][0];
  290.     float ag0, ag1, ag2;
  291.     float phi_fract0 = phi_fract[0];
  292.     float phi_fract1 = phi_fract[1];
  293.     float temp0, temp1, temp2, temp3, temp4, temp5, temp6, temp7, temp8, temp9;
  294.  
  295.     len = (int)((int*)p_delay + (len << 1));
  296.  
  297.     /* merged 2 loops */
  298.     __asm__ volatile(
  299.         ".set    push                                                    \n\t"
  300.         ".set    noreorder                                               \n\t"
  301.         "li.s    %[ag0],        0.65143905753106                         \n\t"
  302.         "li.s    %[ag1],        0.56471812200776                         \n\t"
  303.         "li.s    %[ag2],        0.48954165955695                         \n\t"
  304.         "mul.s   %[ag0],        %[ag0],        %[g_decay_slope]          \n\t"
  305.         "mul.s   %[ag1],        %[ag1],        %[g_decay_slope]          \n\t"
  306.         "mul.s   %[ag2],        %[ag2],        %[g_decay_slope]          \n\t"
  307.     "1:                                                                  \n\t"
  308.         "lwc1    %[temp0],      0(%[p_delay])                            \n\t"
  309.         "lwc1    %[temp1],      4(%[p_delay])                            \n\t"
  310.         "lwc1    %[temp4],      16(%[p_ap_delay])                        \n\t"
  311.         "lwc1    %[temp5],      20(%[p_ap_delay])                        \n\t"
  312.         "mul.s   %[temp3],      %[temp0],      %[phi_fract1]             \n\t"
  313.         "lwc1    %[temp6],      0(%[p_Q_fract])                          \n\t"
  314.         "mul.s   %[temp2],      %[temp1],      %[phi_fract1]             \n\t"
  315.         "lwc1    %[temp7],      4(%[p_Q_fract])                          \n\t"
  316.         "madd.s  %[temp3],      %[temp3],      %[temp1], %[phi_fract0]   \n\t"
  317.         "msub.s  %[temp2],      %[temp2],      %[temp0], %[phi_fract0]   \n\t"
  318.         "mul.s   %[temp8],      %[temp5],      %[temp7]                  \n\t"
  319.         "mul.s   %[temp9],      %[temp4],      %[temp7]                  \n\t"
  320.         "lwc1    %[temp7],      12(%[p_Q_fract])                         \n\t"
  321.         "mul.s   %[temp0],      %[ag0],        %[temp2]                  \n\t"
  322.         "mul.s   %[temp1],      %[ag0],        %[temp3]                  \n\t"
  323.         "msub.s  %[temp8],      %[temp8],      %[temp4], %[temp6]        \n\t"
  324.         "lwc1    %[temp4],      304(%[p_ap_delay])                       \n\t"
  325.         "madd.s  %[temp9],      %[temp9],      %[temp5], %[temp6]        \n\t"
  326.         "lwc1    %[temp5],      308(%[p_ap_delay])                       \n\t"
  327.         "sub.s   %[temp0],      %[temp8],      %[temp0]                  \n\t"
  328.         "sub.s   %[temp1],      %[temp9],      %[temp1]                  \n\t"
  329.         "madd.s  %[temp2],      %[temp2],      %[ag0],   %[temp0]        \n\t"
  330.         "lwc1    %[temp6],      8(%[p_Q_fract])                          \n\t"
  331.         "madd.s  %[temp3],      %[temp3],      %[ag0],   %[temp1]        \n\t"
  332.         "mul.s   %[temp8],      %[temp5],      %[temp7]                  \n\t"
  333.         "mul.s   %[temp9],      %[temp4],      %[temp7]                  \n\t"
  334.         "lwc1    %[temp7],      20(%[p_Q_fract])                         \n\t"
  335.         "msub.s  %[temp8],      %[temp8],      %[temp4], %[temp6]        \n\t"
  336.         "swc1    %[temp2],      40(%[p_ap_delay])                        \n\t"
  337.         "mul.s   %[temp2],      %[ag1],        %[temp0]                  \n\t"
  338.         "swc1    %[temp3],      44(%[p_ap_delay])                        \n\t"
  339.         "mul.s   %[temp3],      %[ag1],        %[temp1]                  \n\t"
  340.         "lwc1    %[temp4],      592(%[p_ap_delay])                       \n\t"
  341.         "madd.s  %[temp9],      %[temp9],      %[temp5], %[temp6]        \n\t"
  342.         "lwc1    %[temp5],      596(%[p_ap_delay])                       \n\t"
  343.         "sub.s   %[temp2],      %[temp8],      %[temp2]                  \n\t"
  344.         "sub.s   %[temp3],      %[temp9],      %[temp3]                  \n\t"
  345.         "lwc1    %[temp6],      16(%[p_Q_fract])                         \n\t"
  346.         "madd.s  %[temp0],      %[temp0],      %[ag1],   %[temp2]        \n\t"
  347.         "madd.s  %[temp1],      %[temp1],      %[ag1],   %[temp3]        \n\t"
  348.         "mul.s   %[temp8],      %[temp5],      %[temp7]                  \n\t"
  349.         "mul.s   %[temp9],      %[temp4],      %[temp7]                  \n\t"
  350.         "msub.s  %[temp8],      %[temp8],      %[temp4], %[temp6]        \n\t"
  351.         "madd.s  %[temp9],      %[temp9],      %[temp5], %[temp6]        \n\t"
  352.         "swc1    %[temp0],      336(%[p_ap_delay])                       \n\t"
  353.         "mul.s   %[temp0],      %[ag2],        %[temp2]                  \n\t"
  354.         "swc1    %[temp1],      340(%[p_ap_delay])                       \n\t"
  355.         "mul.s   %[temp1],      %[ag2],        %[temp3]                  \n\t"
  356.         "lwc1    %[temp4],      0(%[p_t_gain])                           \n\t"
  357.         "sub.s   %[temp0],      %[temp8],      %[temp0]                  \n\t"
  358.         "addiu   %[p_ap_delay], %[p_ap_delay], 8                         \n\t"
  359.         "sub.s   %[temp1],      %[temp9],      %[temp1]                  \n\t"
  360.         "addiu   %[p_t_gain],   %[p_t_gain],   4                         \n\t"
  361.         "madd.s  %[temp2],      %[temp2],      %[ag2],   %[temp0]        \n\t"
  362.         "addiu   %[p_delay],    %[p_delay],    8                         \n\t"
  363.         "madd.s  %[temp3],      %[temp3],      %[ag2],   %[temp1]        \n\t"
  364.         "addiu   %[p_out],      %[p_out],      8                         \n\t"
  365.         "mul.s   %[temp5],      %[temp4],      %[temp0]                  \n\t"
  366.         "mul.s   %[temp6],      %[temp4],      %[temp1]                  \n\t"
  367.         "swc1    %[temp2],      624(%[p_ap_delay])                       \n\t"
  368.         "swc1    %[temp3],      628(%[p_ap_delay])                       \n\t"
  369.         "swc1    %[temp5],      -8(%[p_out])                             \n\t"
  370.         "swc1    %[temp6],      -4(%[p_out])                             \n\t"
  371.         "bne     %[p_delay],    %[len],        1b                        \n\t"
  372.         " swc1   %[temp6],      -4(%[p_out])                             \n\t"
  373.         ".set    pop                                                     \n\t"
  374.  
  375.         : [temp0]"=&f"(temp0), [temp1]"=&f"(temp1), [temp2]"=&f"(temp2),
  376.           [temp3]"=&f"(temp3), [temp4]"=&f"(temp4), [temp5]"=&f"(temp5),
  377.           [temp6]"=&f"(temp6), [temp7]"=&f"(temp7), [temp8]"=&f"(temp8),
  378.           [temp9]"=&f"(temp9), [p_delay]"+r"(p_delay), [p_ap_delay]"+r"(p_ap_delay),
  379.           [p_Q_fract]"+r"(p_Q_fract), [p_t_gain]"+r"(p_t_gain), [p_out]"+r"(p_out),
  380.           [ag0]"=&f"(ag0), [ag1]"=&f"(ag1), [ag2]"=&f"(ag2)
  381.         : [phi_fract0]"f"(phi_fract0), [phi_fract1]"f"(phi_fract1),
  382.           [len]"r"(len), [g_decay_slope]"f"(g_decay_slope)
  383.         : "memory"
  384.     );
  385. }
  386.  
  387. static void ps_stereo_interpolate_mips(float (*l)[2], float (*r)[2],
  388.                                     float h[2][4], float h_step[2][4],
  389.                                     int len)
  390. {
  391.     float h0 = h[0][0];
  392.     float h1 = h[0][1];
  393.     float h2 = h[0][2];
  394.     float h3 = h[0][3];
  395.     float hs0 = h_step[0][0];
  396.     float hs1 = h_step[0][1];
  397.     float hs2 = h_step[0][2];
  398.     float hs3 = h_step[0][3];
  399.     float temp0, temp1, temp2, temp3;
  400.     float l_re, l_im, r_re, r_im;
  401.  
  402.     len = (int)((int*)l + (len << 1));
  403.  
  404.     __asm__ volatile(
  405.         ".set    push                                     \n\t"
  406.         ".set    noreorder                                \n\t"
  407.     "1:                                                   \n\t"
  408.         "add.s   %[h0],     %[h0],     %[hs0]             \n\t"
  409.         "lwc1    %[l_re],   0(%[l])                       \n\t"
  410.         "add.s   %[h1],     %[h1],     %[hs1]             \n\t"
  411.         "lwc1    %[r_re],   0(%[r])                       \n\t"
  412.         "add.s   %[h2],     %[h2],     %[hs2]             \n\t"
  413.         "lwc1    %[l_im],   4(%[l])                       \n\t"
  414.         "add.s   %[h3],     %[h3],     %[hs3]             \n\t"
  415.         "lwc1    %[r_im],   4(%[r])                       \n\t"
  416.         "mul.s   %[temp0],  %[h0],     %[l_re]            \n\t"
  417.         "addiu   %[l],      %[l],      8                  \n\t"
  418.         "mul.s   %[temp2],  %[h1],     %[l_re]            \n\t"
  419.         "addiu   %[r],      %[r],      8                  \n\t"
  420.         "madd.s  %[temp0],  %[temp0],  %[h2],   %[r_re]   \n\t"
  421.         "madd.s  %[temp2],  %[temp2],  %[h3],   %[r_re]   \n\t"
  422.         "mul.s   %[temp1],  %[h0],     %[l_im]            \n\t"
  423.         "mul.s   %[temp3],  %[h1],     %[l_im]            \n\t"
  424.         "madd.s  %[temp1],  %[temp1],  %[h2],   %[r_im]   \n\t"
  425.         "madd.s  %[temp3],  %[temp3],  %[h3],   %[r_im]   \n\t"
  426.         "swc1    %[temp0],  -8(%[l])                      \n\t"
  427.         "swc1    %[temp2],  -8(%[r])                      \n\t"
  428.         "swc1    %[temp1],  -4(%[l])                      \n\t"
  429.         "bne     %[l],      %[len],    1b                 \n\t"
  430.         " swc1   %[temp3],  -4(%[r])                      \n\t"
  431.         ".set    pop                                      \n\t"
  432.  
  433.         : [temp0]"=&f"(temp0), [temp1]"=&f"(temp1),
  434.           [temp2]"=&f"(temp2), [temp3]"=&f"(temp3),
  435.           [h0]"+f"(h0), [h1]"+f"(h1), [h2]"+f"(h2),
  436.           [h3]"+f"(h3), [l]"+r"(l), [r]"+r"(r),
  437.           [l_re]"=&f"(l_re), [l_im]"=&f"(l_im),
  438.           [r_re]"=&f"(r_re), [r_im]"=&f"(r_im)
  439.         : [hs0]"f"(hs0), [hs1]"f"(hs1), [hs2]"f"(hs2),
  440.           [hs3]"f"(hs3), [len]"r"(len)
  441.         : "memory"
  442.     );
  443. }
  444. #endif /* HAVE_MIPSFPU */
  445. #endif /* HAVE_INLINE_ASM */
  446.  
  447. void ff_psdsp_init_mips(PSDSPContext *s)
  448. {
  449. #if HAVE_INLINE_ASM
  450.     s->hybrid_analysis_ileave = ps_hybrid_analysis_ileave_mips;
  451.     s->hybrid_synthesis_deint = ps_hybrid_synthesis_deint_mips;
  452. #if HAVE_MIPSFPU
  453.     s->add_squares            = ps_add_squares_mips;
  454.     s->mul_pair_single        = ps_mul_pair_single_mips;
  455.     s->decorrelate            = ps_decorrelate_mips;
  456.     s->stereo_interpolate[0]  = ps_stereo_interpolate_mips;
  457. #endif /* HAVE_MIPSFPU */
  458. #endif /* HAVE_INLINE_ASM */
  459. }
  460.