Subversion Repositories Kolibri OS

# Makefile.in generated by automake 1.14 from Makefile.am.

# @configure_input@

 

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

 

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

 

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

 

@SET_MAKE@

 

# Copyright © 2012 Intel Corporation

#

# Permission is hereby granted, free of charge, to any person obtaining a

# copy of this software and associated documentation files (the "Software"),

# to deal in the Software without restriction, including without limitation

# the rights to use, copy, modify, merge, publish, distribute, sublicense,

# and/or sell copies of the Software, and to permit persons to whom the

# Software is furnished to do so, subject to the following conditions:

#

# The above copyright notice and this permission notice (including the next

# paragraph) shall be included in all copies or substantial portions of the

# Software.

#

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL

# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS

# IN THE SOFTWARE.

VPATH = @srcdir@

am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'

am__make_running_with_option = \

  case $${target_option-} in \

      ?) ;; \

      *) echo "am__make_running_with_option: internal error: invalid" \

              "target option '$${target_option-}' specified" >&2; \

         exit 1;; \

  esac; \

  has_opt=no; \

  sane_makeflags=$$MAKEFLAGS; \

  if $(am__is_gnu_make); then \

    sane_makeflags=$$MFLAGS; \

  else \

    case $$MAKEFLAGS in \

      *\\[\ \   ]*) \

        bs=\\; \

        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \

          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \

    esac; \

  fi; \

  skip_next=no; \

  strip_trailopt () \

  { \

    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \

  }; \

  for flg in $$sane_makeflags; do \

    test $$skip_next = yes && { skip_next=no; continue; }; \

    case $$flg in \

      *=*|--*) continue;; \

        -*I) strip_trailopt 'I'; skip_next=yes;; \

      -*I?*) strip_trailopt 'I';; \

        -*O) strip_trailopt 'O'; skip_next=yes;; \

      -*O?*) strip_trailopt 'O';; \

        -*l) strip_trailopt 'l'; skip_next=yes;; \

      -*l?*) strip_trailopt 'l';; \

      -[dEDm]) skip_next=yes;; \

      -[JT]) skip_next=yes;; \

    esac; \

    case $$flg in \

      *$$target_option*) has_opt=yes; break;; \

    esac; \

  done; \

  test $$has_opt = yes

am__make_dryrun = (target_option=n; $(am__make_running_with_option))

am__make_keepgoing = (target_option=k; $(am__make_running_with_option))

pkgdatadir = $(datadir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkglibexecdir = $(libexecdir)/@PACKAGE@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

subdir = .

DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \

        $(top_srcdir)/configure $(am__configure_deps) \

        $(top_srcdir)/src/gbm/main/gbm.pc.in bin/ar-lib bin/compile \

        bin/config.guess bin/config.sub bin/depcomp bin/install-sh \

        bin/missing bin/ltmain.sh $(top_srcdir)/bin/ar-lib \

        $(top_srcdir)/bin/compile $(top_srcdir)/bin/config.guess \

        $(top_srcdir)/bin/config.sub $(top_srcdir)/bin/install-sh \

        $(top_srcdir)/bin/ltmain.sh $(top_srcdir)/bin/missing

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/m4/ax_prog_bison.m4 \

        $(top_srcdir)/m4/ax_prog_cc_for_build.m4 \

        $(top_srcdir)/m4/ax_prog_cxx_for_build.m4 \

        $(top_srcdir)/m4/ax_prog_flex.m4 \

        $(top_srcdir)/m4/ax_pthread.m4 \

        $(top_srcdir)/m4/ax_python_module.m4 \

        $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \

        $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \

        $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \

 configure.lineno config.status.lineno

mkinstalldirs = $(install_sh) -d

CONFIG_CLEAN_FILES = src/gbm/main/gbm.pc

CONFIG_CLEAN_VPATH_FILES =

AM_V_P = $(am__v_P_@AM_V@)

am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

am__v_P_0 = false

am__v_P_1 = :

AM_V_GEN = $(am__v_GEN_@AM_V@)

am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

am__v_GEN_0 = @echo "  GEN     " $@;

am__v_GEN_1 =

AM_V_at = $(am__v_at_@AM_V@)

am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

am__v_at_0 = @

am__v_at_1 =

SOURCES =

DIST_SOURCES =

RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \

        ctags-recursive dvi-recursive html-recursive info-recursive \

        install-data-recursive install-dvi-recursive \

        install-exec-recursive install-html-recursive \

        install-info-recursive install-pdf-recursive \

        install-ps-recursive install-recursive installcheck-recursive \

        installdirs-recursive pdf-recursive ps-recursive \

        tags-recursive uninstall-recursive

am__can_run_installinfo = \

  case $$AM_UPDATE_INFO_DIR in \

    n|no|NO) false;; \

    *) (install-info --version) >/dev/null 2>&1;; \

  esac

RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \

  distclean-recursive maintainer-clean-recursive

am__recursive_targets = \

  $(RECURSIVE_TARGETS) \

  $(RECURSIVE_CLEAN_TARGETS) \

  $(am__extra_recursive_targets)

AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \

        cscope distdir dist dist-all distcheck

am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)

# Read a list of newline-separated strings from the standard input,

# and print each of them once, without duplicates.  Input order is

# *not* preserved.

am__uniquify_input = $(AWK) '\

  BEGIN { nonempty = 0; } \

  { items[$$0] = 1; nonempty = 1; } \

  END { if (nonempty) { for (i in items) print i; }; } \

'

# Make sure the list of sources is unique.  This is necessary because,

# e.g., the same source file might be shared among _SOURCES variables

# for different programs/libraries.

am__define_uniq_tagged_files = \

  list='$(am__tagged_files)'; \

  unique=`for i in $$list; do \

    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

  done | $(am__uniquify_input)`

ETAGS = etags

CTAGS = ctags

CSCOPE = cscope

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

distdir = $(PACKAGE)-$(VERSION)

top_distdir = $(distdir)

am__remove_distdir = \

  if test -d "$(distdir)"; then \

    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \

      && rm -rf "$(distdir)" \

      || { sleep 5 && rm -rf "$(distdir)"; }; \

  else :; fi

am__post_remove_distdir = $(am__remove_distdir)

am__relativize = \

  dir0=`pwd`; \

  sed_first='s,^\([^/]*\)/.*$$,\1,'; \

  sed_rest='s,^[^/]*/*,,'; \

  sed_last='s,^.*/\([^/]*\)$$,\1,'; \

  sed_butlast='s,/*[^/]*$$,,'; \

  while test -n "$$dir1"; do \

    first=`echo "$$dir1" | sed -e "$$sed_first"`; \

    if test "$$first" != "."; then \

      if test "$$first" = ".."; then \

        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \

        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \

      else \

        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \

        if test "$$first2" = "$$first"; then \

          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \

        else \

          dir2="../$$dir2"; \

        fi; \

        dir0="$$dir0"/"$$first"; \

      fi; \

    fi; \

    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \

  done; \

  reldir="$$dir2"

DIST_ARCHIVES = $(distdir).tar.gz

GZIP_ENV = --best

DIST_TARGETS = dist-gzip

distuninstallcheck_listfiles = find . -type f -print

am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \

  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'

distcleancheck_listfiles = find . -type f -print

ACLOCAL = @ACLOCAL@

AMTAR = @AMTAR@

AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

AR = @AR@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BUILD_EXEEXT = @BUILD_EXEEXT@

BUILD_OBJEXT = @BUILD_OBJEXT@

CC = @CC@

CCAS = @CCAS@

CCASDEPMODE = @CCASDEPMODE@

CCASFLAGS = @CCASFLAGS@

CCDEPMODE = @CCDEPMODE@

CC_FOR_BUILD = @CC_FOR_BUILD@

CFLAGS = @CFLAGS@

CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@

CLANG_RESOURCE_DIR = @CLANG_RESOURCE_DIR@

CLOCK_LIB = @CLOCK_LIB@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@

CPP_FOR_BUILD = @CPP_FOR_BUILD@

CXX = @CXX@

CXXCPP = @CXXCPP@

CXXCPPFLAGS_FOR_BUILD = @CXXCPPFLAGS_FOR_BUILD@

CXXCPP_FOR_BUILD = @CXXCPP_FOR_BUILD@

CXXDEPMODE = @CXXDEPMODE@

CXXFLAGS = @CXXFLAGS@

CXXFLAGS_FOR_BUILD = @CXXFLAGS_FOR_BUILD@

CXX_FOR_BUILD = @CXX_FOR_BUILD@

CYGPATH_W = @CYGPATH_W@

DEFINES = @DEFINES@

DEFINES_FOR_BUILD = @DEFINES_FOR_BUILD@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DLLTOOL = @DLLTOOL@

DLOPEN_LIBS = @DLOPEN_LIBS@

DRI2PROTO_CFLAGS = @DRI2PROTO_CFLAGS@

DRI2PROTO_LIBS = @DRI2PROTO_LIBS@

DRIGL_CFLAGS = @DRIGL_CFLAGS@

DRIGL_LIBS = @DRIGL_LIBS@

DRI_DRIVER_INSTALL_DIR = @DRI_DRIVER_INSTALL_DIR@

DRI_DRIVER_SEARCH_DIR = @DRI_DRIVER_SEARCH_DIR@

DRI_LIB_DEPS = @DRI_LIB_DEPS@

DRI_PC_REQ_PRIV = @DRI_PC_REQ_PRIV@

DSYMUTIL = @DSYMUTIL@

DUMPBIN = @DUMPBIN@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGL_CFLAGS = @EGL_CFLAGS@

EGL_CLIENT_APIS = @EGL_CLIENT_APIS@

EGL_DRIVER_INSTALL_DIR = @EGL_DRIVER_INSTALL_DIR@

EGL_LIB_DEPS = @EGL_LIB_DEPS@

EGL_LIB_GLOB = @EGL_LIB_GLOB@

EGL_LIB_NAME = @EGL_LIB_NAME@

EGL_NATIVE_PLATFORM = @EGL_NATIVE_PLATFORM@

EGL_PLATFORMS = @EGL_PLATFORMS@

EGREP = @EGREP@

ELF_LIB = @ELF_LIB@

EXEEXT = @EXEEXT@

EXPAT_INCLUDES = @EXPAT_INCLUDES@

FGREP = @FGREP@

FREEDRENO_CFLAGS = @FREEDRENO_CFLAGS@

FREEDRENO_LIBS = @FREEDRENO_LIBS@

GALLIUM_DRI_LIB_DEPS = @GALLIUM_DRI_LIB_DEPS@

GALLIUM_PIPE_LOADER_DEFINES = @GALLIUM_PIPE_LOADER_DEFINES@

GALLIUM_PIPE_LOADER_LIBS = @GALLIUM_PIPE_LOADER_LIBS@

GALLIUM_PIPE_LOADER_XCB_CFLAGS = @GALLIUM_PIPE_LOADER_XCB_CFLAGS@

GALLIUM_PIPE_LOADER_XCB_LIBS = @GALLIUM_PIPE_LOADER_XCB_LIBS@

GBM_PC_LIB_PRIV = @GBM_PC_LIB_PRIV@

GBM_PC_REQ_PRIV = @GBM_PC_REQ_PRIV@

GLAPI_LIB_GLOB = @GLAPI_LIB_GLOB@

GLAPI_LIB_NAME = @GLAPI_LIB_NAME@

GLESv1_CM_LIB_DEPS = @GLESv1_CM_LIB_DEPS@

GLESv1_CM_LIB_GLOB = @GLESv1_CM_LIB_GLOB@

GLESv1_CM_LIB_NAME = @GLESv1_CM_LIB_NAME@

GLESv1_CM_PC_LIB_PRIV = @GLESv1_CM_PC_LIB_PRIV@

GLESv2_LIB_DEPS = @GLESv2_LIB_DEPS@

GLESv2_LIB_GLOB = @GLESv2_LIB_GLOB@

GLESv2_LIB_NAME = @GLESv2_LIB_NAME@

GLESv2_PC_LIB_PRIV = @GLESv2_PC_LIB_PRIV@

GLPROTO_CFLAGS = @GLPROTO_CFLAGS@

GLPROTO_LIBS = @GLPROTO_LIBS@

GLX_TLS = @GLX_TLS@

GL_LIB = @GL_LIB@

GL_LIB_DEPS = @GL_LIB_DEPS@

GL_LIB_GLOB = @GL_LIB_GLOB@

GL_LIB_NAME = @GL_LIB_NAME@

GL_PC_CFLAGS = @GL_PC_CFLAGS@

GL_PC_LIB_PRIV = @GL_PC_LIB_PRIV@

GL_PC_REQ_PRIV = @GL_PC_REQ_PRIV@

GREP = @GREP@

HAVE_XF86VIDMODE = @HAVE_XF86VIDMODE@

INDENT = @INDENT@

INDENT_FLAGS = @INDENT_FLAGS@

INSTALL = @INSTALL@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

INTEL_CFLAGS = @INTEL_CFLAGS@

INTEL_LIBS = @INTEL_LIBS@

LD = @LD@

LDFLAGS = @LDFLAGS@

LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@

LEX = @LEX@

LEXLIB = @LEXLIB@

LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@

LIBCLC_INCLUDEDIR = @LIBCLC_INCLUDEDIR@

LIBCLC_LIBEXECDIR = @LIBCLC_LIBEXECDIR@

LIBDRM_CFLAGS = @LIBDRM_CFLAGS@

LIBDRM_LIBS = @LIBDRM_LIBS@

LIBDRM_XORG_CFLAGS = @LIBDRM_XORG_CFLAGS@

LIBDRM_XORG_LIBS = @LIBDRM_XORG_LIBS@

LIBKMS_XORG_CFLAGS = @LIBKMS_XORG_CFLAGS@

LIBKMS_XORG_LIBS = @LIBKMS_XORG_LIBS@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LIBTOOL = @LIBTOOL@

LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@

LIBUDEV_LIBS = @LIBUDEV_LIBS@

LIB_DIR = @LIB_DIR@

LIPO = @LIPO@

LLVM_BINDIR = @LLVM_BINDIR@

LLVM_CFLAGS = @LLVM_CFLAGS@

LLVM_CONFIG = @LLVM_CONFIG@

LLVM_CPPFLAGS = @LLVM_CPPFLAGS@

LLVM_CXXFLAGS = @LLVM_CXXFLAGS@

LLVM_INCLUDEDIR = @LLVM_INCLUDEDIR@

LLVM_LDFLAGS = @LLVM_LDFLAGS@

LLVM_LIBDIR = @LLVM_LIBDIR@

LLVM_LIBS = @LLVM_LIBS@

LLVM_VERSION = @LLVM_VERSION@

LN_S = @LN_S@

LTLIBOBJS = @LTLIBOBJS@

MAKE = @MAKE@

MAKEINFO = @MAKEINFO@

MANIFEST_TOOL = @MANIFEST_TOOL@

MESA_LLVM = @MESA_LLVM@

MKDIR_P = @MKDIR_P@

NM = @NM@

NMEDIT = @NMEDIT@

NOUVEAU_CFLAGS = @NOUVEAU_CFLAGS@

NOUVEAU_LIBS = @NOUVEAU_LIBS@

OBJDUMP = @OBJDUMP@

OBJEXT = @OBJEXT@

OPENCL_LIB_INSTALL_DIR = @OPENCL_LIB_INSTALL_DIR@

OSMESA_LIB = @OSMESA_LIB@

OSMESA_LIB_DEPS = @OSMESA_LIB_DEPS@

OSMESA_LIB_NAME = @OSMESA_LIB_NAME@

OSMESA_MESA_DEPS = @OSMESA_MESA_DEPS@

OSMESA_PC_LIB_PRIV = @OSMESA_PC_LIB_PRIV@

OSMESA_PC_REQ = @OSMESA_PC_REQ@

OSMESA_VERSION = @OSMESA_VERSION@

OTOOL = @OTOOL@

OTOOL64 = @OTOOL64@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = MesaLib-$(PACKAGE_VERSION)

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_URL = @PACKAGE_URL@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

PERL = @PERL@

PKG_CONFIG = @PKG_CONFIG@

PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@

PKG_CONFIG_PATH = @PKG_CONFIG_PATH@

POSIX_SHELL = @POSIX_SHELL@

PTHREAD_CC = @PTHREAD_CC@

PTHREAD_CFLAGS = @PTHREAD_CFLAGS@

PTHREAD_LIBS = @PTHREAD_LIBS@

PYTHON2 = @PYTHON2@

RADEON_CFLAGS = @RADEON_CFLAGS@

RADEON_LIBS = @RADEON_LIBS@

RANLIB = @RANLIB@

SED = @SED@

SELINUX_LIBS = @SELINUX_LIBS@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

VDPAU_CFLAGS = @VDPAU_CFLAGS@

VDPAU_LIBS = @VDPAU_LIBS@

VDPAU_LIB_INSTALL_DIR = @VDPAU_LIB_INSTALL_DIR@

VDPAU_MAJOR = @VDPAU_MAJOR@

VDPAU_MINOR = @VDPAU_MINOR@

VERSION = @VERSION@

VG_LIB_DEPS = @VG_LIB_DEPS@

VG_LIB_GLOB = @VG_LIB_GLOB@

VG_LIB_NAME = @VG_LIB_NAME@

VG_PC_LIB_PRIV = @VG_PC_LIB_PRIV@

VISIBILITY_CFLAGS = @VISIBILITY_CFLAGS@

VISIBILITY_CXXFLAGS = @VISIBILITY_CXXFLAGS@

WAYLAND_CFLAGS = @WAYLAND_CFLAGS@

WAYLAND_LIBS = @WAYLAND_LIBS@

WAYLAND_SCANNER = @WAYLAND_SCANNER@

X11_INCLUDES = @X11_INCLUDES@

XA_MAJOR = @XA_MAJOR@

XA_MINOR = @XA_MINOR@

XA_TINY = @XA_TINY@

XA_VERSION = @XA_VERSION@

XCB_DRI2_CFLAGS = @XCB_DRI2_CFLAGS@

XCB_DRI2_LIBS = @XCB_DRI2_LIBS@

XEXT_CFLAGS = @XEXT_CFLAGS@

XEXT_LIBS = @XEXT_LIBS@

XF86VIDMODE_CFLAGS = @XF86VIDMODE_CFLAGS@

XF86VIDMODE_LIBS = @XF86VIDMODE_LIBS@

XLIBGL_CFLAGS = @XLIBGL_CFLAGS@

XLIBGL_LIBS = @XLIBGL_LIBS@

XORG_CFLAGS = @XORG_CFLAGS@

XORG_DRIVER_INSTALL_DIR = @XORG_DRIVER_INSTALL_DIR@

XORG_LIBS = @XORG_LIBS@

XVMC_CFLAGS = @XVMC_CFLAGS@

XVMC_LIBS = @XVMC_LIBS@

XVMC_LIB_INSTALL_DIR = @XVMC_LIB_INSTALL_DIR@

XVMC_MAJOR = @XVMC_MAJOR@

XVMC_MINOR = @XVMC_MINOR@

YACC = @YACC@

YFLAGS = @YFLAGS@

abs_builddir = @abs_builddir@

abs_srcdir = @abs_srcdir@

abs_top_builddir = @abs_top_builddir@

abs_top_srcdir = @abs_top_srcdir@

ac_ct_AR = @ac_ct_AR@

ac_ct_CC = @ac_ct_CC@

ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@

ac_ct_CXX = @ac_ct_CXX@

ac_ct_CXX_FOR_BUILD = @ac_ct_CXX_FOR_BUILD@

ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

ax_pthread_config = @ax_pthread_config@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

builddir = @builddir@

datadir = @datadir@

datarootdir = @datarootdir@

docdir = @docdir@

dvidir = @dvidir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

htmldir = @htmldir@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localedir = @localedir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

pdfdir = @pdfdir@

prefix = @prefix@

program_transform_name = @program_transform_name@

psdir = @psdir@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

srcdir = @srcdir@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

top_build_prefix = @top_build_prefix@

top_builddir = @top_builddir@

top_srcdir = @top_srcdir@

SUBDIRS = src

ACLOCAL_AMFLAGS = -I m4

 

# Rules for making release tarballs

PACKAGE_DIR = Mesa-$(PACKAGE_VERSION)

EXTRA_FILES = \

        aclocal.m4                                      \

        configure                                       \

        bin/ar-lib                                      \

        bin/compile                                     \

        bin/config.sub                                  \

        bin/config.guess                                \

        bin/depcomp                                     \

        bin/install-sh                                  \

        bin/ltmain.sh                                   \

        bin/missing                                     \

        bin/test-driver                                 \

        bin/ylwrap                                      \

        src/glsl/glsl_parser.cpp                        \

        src/glsl/glsl_parser.h                          \

        src/glsl/glsl_lexer.cpp                         \

        src/glsl/glcpp/glcpp-lex.c                      \

        src/glsl/glcpp/glcpp-parse.c                    \

        src/glsl/glcpp/glcpp-parse.h                    \

        src/mesa/program/lex.yy.c                       \

        src/mesa/program/program_parse.tab.c            \

        src/mesa/program/program_parse.tab.h            \

        `git ls-files | grep "Makefile.am" | sed -e "s/Makefile.am/Makefile.in/"`

 

IGNORE_FILES = \

        -x autogen.sh

 

 

# Everything for new a Mesa release:

ARCHIVES = $(PACKAGE_NAME).tar.gz \

        $(PACKAGE_NAME).tar.bz2 \

        $(PACKAGE_NAME).zip

 

all: all-recursive

 

.SUFFIXES:

am--refresh: Makefile

        @:

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \

              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \

                && exit 0; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \

        $(am__cd) $(top_srcdir) && \

          $(AUTOMAKE) --foreign Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            echo ' $(SHELL) ./config.status'; \

            $(SHELL) ./config.status;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \

        esac;

 

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        $(SHELL) ./config.status --recheck

 

$(top_srcdir)/configure:  $(am__configure_deps)

        $(am__cd) $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)

$(am__aclocal_m4_deps):

src/gbm/main/gbm.pc: $(top_builddir)/config.status $(top_srcdir)/src/gbm/main/gbm.pc.in

        cd $(top_builddir) && $(SHELL) ./config.status $@

 

mostlyclean-libtool:

        -rm -f *.lo

 

clean-libtool:

        -rm -rf .libs _libs

 

distclean-libtool:

        -rm -f libtool config.lt

 

# This directory's subdirectories are mostly independent; you can cd

# into them and run 'make' without going through this Makefile.

# To change the values of 'make' variables: instead of editing Makefiles,

# (1) if the variable is set in 'config.status', edit 'config.status'

#     (which will cause the Makefiles to be regenerated when you run 'make');

# (2) otherwise, pass the desired values on the 'make' command line.

$(am__recursive_targets):

        @fail=; \

        if $(am__make_keepgoing); then \

          failcom='fail=yes'; \

        else \

          failcom='exit 1'; \

        fi; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        case "$@" in \

          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

          *) list='$(SUBDIRS)' ;; \

        esac; \

        for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

 

ID: $(am__tagged_files)

        $(am__define_uniq_tagged_files); mkid -fID $$unique

tags: tags-recursive

TAGS: tags

 

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

        set x; \

        here=`pwd`; \

        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

          include_option=--etags-include; \

          empty_fix=.; \

        else \

          include_option=--include; \

          empty_fix=; \

        fi; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test ! -f $$subdir/TAGS || \

              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \

          fi; \

        done; \

        $(am__define_uniq_tagged_files); \

        shift; \

        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

          test -n "$$unique" || unique=$$empty_fix; \

          if test $$# -gt 0; then \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              "$$@" $$unique; \

          else \

            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

              $$unique; \

          fi; \

        fi

ctags: ctags-recursive

 

CTAGS: ctags

ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

        $(am__define_uniq_tagged_files); \

        test -z "$(CTAGS_ARGS)$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$unique

 

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && $(am__cd) $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) "$$here"

cscope: cscope.files

        test ! -s cscope.files \

          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)

clean-cscope:

        -rm -f cscope.files

cscope.files: clean-cscope cscopelist

cscopelist: cscopelist-recursive

 

cscopelist-am: $(am__tagged_files)

        list='$(am__tagged_files)'; \

        case "$(srcdir)" in \

          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

          *) sdir=$(subdir)/$(srcdir) ;; \

        esac; \

        for i in $$list; do \

          if test -f "$$i"; then \

            echo "$(subdir)/$$i"; \

          else \

            echo "$$sdir/$$i"; \

          fi; \

        done >> $(top_builddir)/cscope.files

 

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files

 

distdir: $(DISTFILES)

        $(am__remove_distdir)

        test -d "$(distdir)" || mkdir "$(distdir)"

        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

        list='$(DISTFILES)'; \

          dist_files=`for file in $$list; do echo $$file; done | \

          sed -e "s|^$$srcdirstrip/||;t" \

              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

        case $$dist_files in \

          */*) $(MKDIR_P) `echo "$$dist_files" | \

                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

                           sort -u` ;; \

        esac; \

        for file in $$dist_files; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          if test -d $$d/$$file; then \

            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

            if test -d "$(distdir)/$$file"; then \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

            fi; \

            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

          else \

            test -f "$(distdir)/$$file" \

            || cp -p $$d/$$file "$(distdir)/$$file" \

            || exit 1; \

          fi; \

        done

        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            $(am__make_dryrun) \

              || test -d "$(distdir)/$$subdir" \

              || $(MKDIR_P) "$(distdir)/$$subdir" \

              || exit 1; \

            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \

            $(am__relativize); \

            new_distdir=$$reldir; \

            dir1=$$subdir; dir2="$(top_distdir)"; \

            $(am__relativize); \

            new_top_distdir=$$reldir; \

            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \

            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \

            ($(am__cd) $$subdir && \

              $(MAKE) $(AM_MAKEFLAGS) \

                top_distdir="$$new_top_distdir" \

                distdir="$$new_distdir" \

                am__remove_distdir=: \

                am__skip_length_check=: \

                am__skip_mode_fix=: \

                distdir) \

              || exit 1; \

          fi; \

        done

        -test -n "$(am__skip_mode_fix)" \

        || find "$(distdir)" -type d ! -perm -755 \

                -exec chmod u+rwx,go+rx {} \; -o \

          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \

          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \

          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \

        || chmod -R a+r "$(distdir)"

dist-gzip: distdir

        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz

        $(am__post_remove_distdir)

 

dist-bzip2: distdir

        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2

        $(am__post_remove_distdir)

 

dist-lzip: distdir

        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz

        $(am__post_remove_distdir)

 

dist-xz: distdir

        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz

        $(am__post_remove_distdir)

 

dist-tarZ: distdir

        @echo WARNING: "Support for shar distribution archives is" \

                       "deprecated." >&2

        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2

        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z

        $(am__post_remove_distdir)

 

dist-shar: distdir

        @echo WARNING: "Support for distribution archives compressed with" \

                       "legacy program 'compress' is deprecated." >&2

        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2

        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz

        $(am__post_remove_distdir)

 

dist-zip: distdir

        -rm -f $(distdir).zip

        zip -rq $(distdir).zip $(distdir)

        $(am__post_remove_distdir)

 

dist dist-all:

        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'

        $(am__post_remove_distdir)

 

# This target untars the dist file and tries a VPATH configuration.  Then

# it guarantees that the distribution is self-contained by making another

# tarfile.

distcheck: dist

        case '$(DIST_ARCHIVES)' in \

        *.tar.gz*) \

          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\

        *.tar.bz2*) \

          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\

        *.tar.lz*) \

          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\

        *.tar.xz*) \

          xz -dc $(distdir).tar.xz | $(am__untar) ;;\

        *.tar.Z*) \

          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\

        *.shar.gz*) \

          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\

        *.zip*) \

          unzip $(distdir).zip ;;\

        esac

        chmod -R a-w $(distdir)

        chmod u+w $(distdir)

        mkdir $(distdir)/_build $(distdir)/_inst

        chmod a-w $(distdir)

        test -d $(distdir)/_build || exit 0; \

        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \

          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \

          && am__cwd=`pwd` \

          && $(am__cd) $(distdir)/_build \

          && ../configure --srcdir=.. --prefix="$$dc_install_base" \

            $(AM_DISTCHECK_CONFIGURE_FLAGS) \

            $(DISTCHECK_CONFIGURE_FLAGS) \

          && $(MAKE) $(AM_MAKEFLAGS) \

          && $(MAKE) $(AM_MAKEFLAGS) dvi \

          && $(MAKE) $(AM_MAKEFLAGS) check \

          && $(MAKE) $(AM_MAKEFLAGS) install \

          && $(MAKE) $(AM_MAKEFLAGS) installcheck \

          && $(MAKE) $(AM_MAKEFLAGS) uninstall \

          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \

                distuninstallcheck \

          && chmod -R a-w "$$dc_install_base" \

          && ({ \

               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \

               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \

                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \

              } || { rm -rf "$$dc_destdir"; exit 1; }) \

          && rm -rf "$$dc_destdir" \

          && $(MAKE) $(AM_MAKEFLAGS) dist \

          && rm -rf $(DIST_ARCHIVES) \

          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \

          && cd "$$am__cwd" \

          || exit 1

        $(am__post_remove_distdir)

        @(echo "$(distdir) archives ready for distribution: "; \

          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \

          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'

distuninstallcheck:

        @test -n '$(distuninstallcheck_dir)' || { \

          echo 'ERROR: trying to run $@ with an empty' \

               '$$(distuninstallcheck_dir)' >&2; \

          exit 1; \

        }; \

        $(am__cd) '$(distuninstallcheck_dir)' || { \

          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \

          exit 1; \

        }; \

        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \

           || { echo "ERROR: files left after uninstall:" ; \

                if test -n "$(DESTDIR)"; then \

                  echo "  (check DESTDIR support)"; \

                fi ; \

                $(distuninstallcheck_listfiles) ; \

                exit 1; } >&2

distcleancheck: distclean

        @if test '$(srcdir)' = . ; then \

          echo "ERROR: distcleancheck can only run from a VPATH build" ; \

          exit 1 ; \

        fi

        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \

          || { echo "ERROR: files left in build directory after distclean:" ; \

               $(distcleancheck_listfiles) ; \

               exit 1; } >&2

check-am: all-am

        $(MAKE) $(AM_MAKEFLAGS) check-local

check: check-recursive

all-am: Makefile

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

 

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

 

installcheck: installcheck-recursive

install-strip:

        if test -z '$(STRIP)'; then \

          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

              install; \

        else \

          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

        fi

mostlyclean-generic:

 

clean-generic:

 

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

 

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

 

clean-am: clean-generic clean-libtool mostlyclean-am

 

distclean: distclean-recursive

        -rm -f $(am__CONFIG_DISTCLEAN_FILES)

        -rm -f Makefile

distclean-am: clean-am distclean-generic distclean-libtool \

        distclean-tags

 

dvi: dvi-recursive

 

dvi-am:

 

html: html-recursive

 

html-am:

 

info: info-recursive

 

info-am:

 

install-data-am:

 

install-dvi: install-dvi-recursive

 

install-dvi-am:

 

install-exec-am:

 

install-html: install-html-recursive

 

install-html-am:

 

install-info: install-info-recursive

 

install-info-am:

 

install-man:

 

install-pdf: install-pdf-recursive

 

install-pdf-am:

 

install-ps: install-ps-recursive

 

install-ps-am:

 

installcheck-am:

 

maintainer-clean: maintainer-clean-recursive

        -rm -f $(am__CONFIG_DISTCLEAN_FILES)

        -rm -rf $(top_srcdir)/autom4te.cache

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

 

mostlyclean: mostlyclean-recursive

 

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

 

pdf: pdf-recursive

 

pdf-am:

 

ps: ps-recursive

 

ps-am:

 

uninstall-am:

 

.MAKE: $(am__recursive_targets) check-am install-am install-strip

 

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \

        am--refresh check check-am check-local clean clean-cscope \

        clean-generic clean-libtool cscope cscopelist-am ctags \

        ctags-am dist dist-all dist-bzip2 dist-gzip dist-lzip \

        dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \

        distclean-generic distclean-libtool distclean-tags \

        distcleancheck distdir distuninstallcheck dvi dvi-am html \

        html-am info info-am install install-am install-data \

        install-data-am install-dvi install-dvi-am install-exec \

        install-exec-am install-html install-html-am install-info \

        install-info-am install-man install-pdf install-pdf-am \

        install-ps install-ps-am install-strip installcheck \

        installcheck-am installdirs installdirs-am maintainer-clean \

        maintainer-clean-generic mostlyclean mostlyclean-generic \

        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \

        uninstall-am

 

 

doxygen:

        cd doxygen && $(MAKE)

 

check-local:

        $(MAKE) -C src/mapi/glapi/tests check

        $(MAKE) -C src/mapi/shared-glapi/tests check

        $(MAKE) -C src/mesa/main/tests check

        $(MAKE) -C src/glx/tests check

 

.PHONY: doxygen

 

parsers: configure

        $(MAKE) -C src/glsl glsl_parser.cpp glsl_parser.h glsl_lexer.cpp glcpp/glcpp-lex.c glcpp/glcpp-parse.c glcpp/glcpp-parse.h

        $(MAKE) -C src/mesa/program lex.yy.c program_parse.tab.c program_parse.tab.h

 

tarballs: md5

        rm -f ../$(PACKAGE_DIR) $(PACKAGE_NAME).tar

 

manifest.txt: .git

        ( \

                ls -1 $(EXTRA_FILES) ; \

                git ls-files $(IGNORE_FILES) \

        ) | sed -e '/^\(.*\/\)\?\./d' -e "s@^@$(PACKAGE_DIR)/@" > $@

 

../$(PACKAGE_DIR):

        ln -s $(PWD) $@

 

$(PACKAGE_NAME).tar: parsers ../$(PACKAGE_DIR) manifest.txt

        cd .. ; tar -cf $(PACKAGE_DIR)/$(PACKAGE_NAME).tar -T $(PACKAGE_DIR)/manifest.txt

 

$(PACKAGE_NAME).tar.gz: $(PACKAGE_NAME).tar ../$(PACKAGE_DIR)

        gzip --stdout --best $(PACKAGE_NAME).tar > $(PACKAGE_NAME).tar.gz

 

$(PACKAGE_NAME).tar.bz2: $(PACKAGE_NAME).tar

        bzip2 --stdout --best $(PACKAGE_NAME).tar > $(PACKAGE_NAME).tar.bz2

 

$(PACKAGE_NAME).zip: parsers ../$(PACKAGE_DIR) manifest.txt

        rm -f $(PACKAGE_NAME).zip ; \

        cd .. ; \

        zip -q -@ $(PACKAGE_NAME).zip < $(PACKAGE_DIR)/manifest.txt ; \

        mv $(PACKAGE_NAME).zip $(PACKAGE_DIR)

 

md5: $(ARCHIVES)

        @-md5sum $(PACKAGE_NAME).tar.gz

        @-md5sum $(PACKAGE_NAME).tar.bz2

        @-md5sum $(PACKAGE_NAME).zip

 

.PHONY: tarballs md5

 

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: