Subversion Repositories Kolibri OS

Rev

Go to most recent revision | Blame | Last modification | View Log | RSS feed

  1. /***************************************************************************/
  2. /*                                                                         */
  3. /*  ftoption.h                                                             */
  4. /*                                                                         */
  5. /*    User-selectable configuration macros (specification only).           */
  6. /*                                                                         */
  7. /*  Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,   */
  8. /*            2010 by                                                      */
  9. /*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
  10. /*                                                                         */
  11. /*  This file is part of the FreeType project, and may only be used,       */
  12. /*  modified, and distributed under the terms of the FreeType project      */
  13. /*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
  14. /*  this file you indicate that you have read the license and              */
  15. /*  understand and accept it fully.                                        */
  16. /*                                                                         */
  17. /***************************************************************************/
  18.  
  19.  
  20. #ifndef __FTOPTION_H__
  21. #define __FTOPTION_H__
  22.  
  23.  
  24. #include <ft2build.h>
  25.  
  26.  
  27. FT_BEGIN_HEADER
  28.  
  29.   /*************************************************************************/
  30.   /*                                                                       */
  31.   /*                 USER-SELECTABLE CONFIGURATION MACROS                  */
  32.   /*                                                                       */
  33.   /* This file contains the default configuration macro definitions for    */
  34.   /* a standard build of the FreeType library.  There are three ways to    */
  35.   /* use this file to build project-specific versions of the library:      */
  36.   /*                                                                       */
  37.   /*  - You can modify this file by hand, but this is not recommended in   */
  38.   /*    cases where you would like to build several versions of the        */
  39.   /*    library from a single source directory.                            */
  40.   /*                                                                       */
  41.   /*  - You can put a copy of this file in your build directory, more      */
  42.   /*    precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD'   */
  43.   /*    is the name of a directory that is included _before_ the FreeType  */
  44.   /*    include path during compilation.                                   */
  45.   /*                                                                       */
  46.   /*    The default FreeType Makefiles and Jamfiles use the build          */
  47.   /*    directory `builds/<system>' by default, but you can easily change  */
  48.   /*    that for your own projects.                                        */
  49.   /*                                                                       */
  50.   /*  - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it    */
  51.   /*    slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to       */
  52.   /*    locate this file during the build.  For example,                   */
  53.   /*                                                                       */
  54.   /*      #define FT_CONFIG_OPTIONS_H  <myftoptions.h>                     */
  55.   /*      #include <freetype/config/ftheader.h>                            */
  56.   /*                                                                       */
  57.   /*    will use `$BUILD/myftoptions.h' instead of this file for macro     */
  58.   /*    definitions.                                                       */
  59.   /*                                                                       */
  60.   /*    Note also that you can similarly pre-define the macro              */
  61.   /*    FT_CONFIG_MODULES_H used to locate the file listing of the modules */
  62.   /*    that are statically linked to the library at compile time.  By     */
  63.   /*    default, this file is <freetype/config/ftmodule.h>.                */
  64.   /*                                                                       */
  65.   /*  We highly recommend using the third method whenever possible.        */
  66.   /*                                                                       */
  67.   /*************************************************************************/
  68.  
  69.  
  70.   /*************************************************************************/
  71.   /*************************************************************************/
  72.   /****                                                                 ****/
  73.   /**** G E N E R A L   F R E E T Y P E   2   C O N F I G U R A T I O N ****/
  74.   /****                                                                 ****/
  75.   /*************************************************************************/
  76.   /*************************************************************************/
  77.  
  78.  
  79.   /*************************************************************************/
  80.   /*                                                                       */
  81.   /* Uncomment the line below if you want to activate sub-pixel rendering  */
  82.   /* (a.k.a. LCD rendering, or ClearType) in this build of the library.    */
  83.   /*                                                                       */
  84.   /* Note that this feature is covered by several Microsoft patents        */
  85.   /* and should not be activated in any default build of the library.      */
  86.   /*                                                                       */
  87.   /* This macro has no impact on the FreeType API, only on its             */
  88.   /* _implementation_.  For example, using FT_RENDER_MODE_LCD when calling */
  89.   /* FT_Render_Glyph still generates a bitmap that is 3 times wider than   */
  90.   /* the original size in case this macro isn't defined; however, each     */
  91.   /* triplet of subpixels has R=G=B.                                       */
  92.   /*                                                                       */
  93.   /* This is done to allow FreeType clients to run unmodified, forcing     */
  94.   /* them to display normal gray-level anti-aliased glyphs.                */
  95.   /*                                                                       */
  96. /* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
  97.  
  98.  
  99.   /*************************************************************************/
  100.   /*                                                                       */
  101.   /* Many compilers provide a non-ANSI 64-bit data type that can be used   */
  102.   /* by FreeType to speed up some computations.  However, this will create */
  103.   /* some problems when compiling the library in strict ANSI mode.         */
  104.   /*                                                                       */
  105.   /* For this reason, the use of 64-bit integers is normally disabled when */
  106.   /* the __STDC__ macro is defined.  You can however disable this by       */
  107.   /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here.                 */
  108.   /*                                                                       */
  109.   /* For most compilers, this will only create compilation warnings when   */
  110.   /* building the library.                                                 */
  111.   /*                                                                       */
  112.   /* ObNote: The compiler-specific 64-bit integers are detected in the     */
  113.   /*         file `ftconfig.h' either statically or through the            */
  114.   /*         `configure' script on supported platforms.                    */
  115.   /*                                                                       */
  116. #undef FT_CONFIG_OPTION_FORCE_INT64
  117.  
  118.  
  119.   /*************************************************************************/
  120.   /*                                                                       */
  121.   /* If this macro is defined, do not try to use an assembler version of   */
  122.   /* performance-critical functions (e.g. FT_MulFix).  You should only do  */
  123.   /* that to verify that the assembler function works properly, or to      */
  124.   /* execute benchmark tests of the various implementations.               */
  125. /* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
  126.  
  127.  
  128.   /*************************************************************************/
  129.   /*                                                                       */
  130.   /* If this macro is defined, try to use an inlined assembler version of  */
  131.   /* the `FT_MulFix' function, which is a `hotspot' when loading and       */
  132.   /* hinting glyphs, and which should be executed as fast as possible.     */
  133.   /*                                                                       */
  134.   /* Note that if your compiler or CPU is not supported, this will default */
  135.   /* to the standard and portable implementation found in `ftcalc.c'.      */
  136.   /*                                                                       */
  137. #define FT_CONFIG_OPTION_INLINE_MULFIX
  138.  
  139.  
  140.   /*************************************************************************/
  141.   /*                                                                       */
  142.   /* LZW-compressed file support.                                          */
  143.   /*                                                                       */
  144.   /*   FreeType now handles font files that have been compressed with the  */
  145.   /*   `compress' program.  This is mostly used to parse many of the PCF   */
  146.   /*   files that come with various X11 distributions.  The implementation */
  147.   /*   uses NetBSD's `zopen' to partially uncompress the file on the fly   */
  148.   /*   (see src/lzw/ftgzip.c).                                             */
  149.   /*                                                                       */
  150.   /*   Define this macro if you want to enable this `feature'.             */
  151.   /*                                                                       */
  152. #define FT_CONFIG_OPTION_USE_LZW
  153.  
  154.  
  155.   /*************************************************************************/
  156.   /*                                                                       */
  157.   /* Gzip-compressed file support.                                         */
  158.   /*                                                                       */
  159.   /*   FreeType now handles font files that have been compressed with the  */
  160.   /*   `gzip' program.  This is mostly used to parse many of the PCF files */
  161.   /*   that come with XFree86.  The implementation uses `zlib' to          */
  162.   /*   partially uncompress the file on the fly (see src/gzip/ftgzip.c).   */
  163.   /*                                                                       */
  164.   /*   Define this macro if you want to enable this `feature'.  See also   */
  165.   /*   the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below.                       */
  166.   /*                                                                       */
  167. #define FT_CONFIG_OPTION_USE_ZLIB
  168.  
  169.  
  170.   /*************************************************************************/
  171.   /*                                                                       */
  172.   /* ZLib library selection                                                */
  173.   /*                                                                       */
  174.   /*   This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined.  */
  175.   /*   It allows FreeType's `ftgzip' component to link to the system's     */
  176.   /*   installation of the ZLib library.  This is useful on systems like   */
  177.   /*   Unix or VMS where it generally is already available.                */
  178.   /*                                                                       */
  179.   /*   If you let it undefined, the component will use its own copy        */
  180.   /*   of the zlib sources instead.  These have been modified to be        */
  181.   /*   included directly within the component and *not* export external    */
  182.   /*   function names.  This allows you to link any program with FreeType  */
  183.   /*   _and_ ZLib without linking conflicts.                               */
  184.   /*                                                                       */
  185.   /*   Do not #undef this macro here since the build system might define   */
  186.   /*   it for certain configurations only.                                 */
  187.   /*                                                                       */
  188. /* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
  189.  
  190.  
  191.   /*************************************************************************/
  192.   /*                                                                       */
  193.   /* DLL export compilation                                                */
  194.   /*                                                                       */
  195.   /*   When compiling FreeType as a DLL, some systems/compilers need a     */
  196.   /*   special keyword in front OR after the return type of function       */
  197.   /*   declarations.                                                       */
  198.   /*                                                                       */
  199.   /*   Two macros are used within the FreeType source code to define       */
  200.   /*   exported library functions: FT_EXPORT and FT_EXPORT_DEF.            */
  201.   /*                                                                       */
  202.   /*     FT_EXPORT( return_type )                                          */
  203.   /*                                                                       */
  204.   /*       is used in a function declaration, as in                        */
  205.   /*                                                                       */
  206.   /*         FT_EXPORT( FT_Error )                                         */
  207.   /*         FT_Init_FreeType( FT_Library*  alibrary );                    */
  208.   /*                                                                       */
  209.   /*                                                                       */
  210.   /*     FT_EXPORT_DEF( return_type )                                      */
  211.   /*                                                                       */
  212.   /*       is used in a function definition, as in                         */
  213.   /*                                                                       */
  214.   /*         FT_EXPORT_DEF( FT_Error )                                     */
  215.   /*         FT_Init_FreeType( FT_Library*  alibrary )                     */
  216.   /*         {                                                             */
  217.   /*           ... some code ...                                           */
  218.   /*           return FT_Err_Ok;                                           */
  219.   /*         }                                                             */
  220.   /*                                                                       */
  221.   /*   You can provide your own implementation of FT_EXPORT and            */
  222.   /*   FT_EXPORT_DEF here if you want.  If you leave them undefined, they  */
  223.   /*   will be later automatically defined as `extern return_type' to      */
  224.   /*   allow normal compilation.                                           */
  225.   /*                                                                       */
  226.   /*   Do not #undef these macros here since the build system might define */
  227.   /*   them for certain configurations only.                               */
  228.   /*                                                                       */
  229. /* #define FT_EXPORT(x)      extern x */
  230. /* #define FT_EXPORT_DEF(x)  x */
  231.  
  232.  
  233.   /*************************************************************************/
  234.   /*                                                                       */
  235.   /* Glyph Postscript Names handling                                       */
  236.   /*                                                                       */
  237.   /*   By default, FreeType 2 is compiled with the `psnames' module.  This */
  238.   /*   module is in charge of converting a glyph name string into a        */
  239.   /*   Unicode value, or return a Macintosh standard glyph name for the    */
  240.   /*   use with the TrueType `post' table.                                 */
  241.   /*                                                                       */
  242.   /*   Undefine this macro if you do not want `psnames' compiled in your   */
  243.   /*   build of FreeType.  This has the following effects:                 */
  244.   /*                                                                       */
  245.   /*   - The TrueType driver will provide its own set of glyph names,      */
  246.   /*     if you build it to support postscript names in the TrueType       */
  247.   /*     `post' table.                                                     */
  248.   /*                                                                       */
  249.   /*   - The Type 1 driver will not be able to synthesize a Unicode        */
  250.   /*     charmap out of the glyphs found in the fonts.                     */
  251.   /*                                                                       */
  252.   /*   You would normally undefine this configuration macro when building  */
  253.   /*   a version of FreeType that doesn't contain a Type 1 or CFF driver.  */
  254.   /*                                                                       */
  255. #define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
  256.  
  257.  
  258.   /*************************************************************************/
  259.   /*                                                                       */
  260.   /* Postscript Names to Unicode Values support                            */
  261.   /*                                                                       */
  262.   /*   By default, FreeType 2 is built with the `PSNames' module compiled  */
  263.   /*   in.  Among other things, the module is used to convert a glyph name */
  264.   /*   into a Unicode value.  This is especially useful in order to        */
  265.   /*   synthesize on the fly a Unicode charmap from the CFF/Type 1 driver  */
  266.   /*   through a big table named the `Adobe Glyph List' (AGL).             */
  267.   /*                                                                       */
  268.   /*   Undefine this macro if you do not want the Adobe Glyph List         */
  269.   /*   compiled in your `PSNames' module.  The Type 1 driver will not be   */
  270.   /*   able to synthesize a Unicode charmap out of the glyphs found in the */
  271.   /*   fonts.                                                              */
  272.   /*                                                                       */
  273. #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
  274.  
  275.  
  276.   /*************************************************************************/
  277.   /*                                                                       */
  278.   /* Support for Mac fonts                                                 */
  279.   /*                                                                       */
  280.   /*   Define this macro if you want support for outline fonts in Mac      */
  281.   /*   format (mac dfont, mac resource, macbinary containing a mac         */
  282.   /*   resource) on non-Mac platforms.                                     */
  283.   /*                                                                       */
  284.   /*   Note that the `FOND' resource isn't checked.                        */
  285.   /*                                                                       */
  286. #define FT_CONFIG_OPTION_MAC_FONTS
  287.  
  288.  
  289.   /*************************************************************************/
  290.   /*                                                                       */
  291.   /* Guessing methods to access embedded resource forks                    */
  292.   /*                                                                       */
  293.   /*   Enable extra Mac fonts support on non-Mac platforms (e.g.           */
  294.   /*   GNU/Linux).                                                         */
  295.   /*                                                                       */
  296.   /*   Resource forks which include fonts data are stored sometimes in     */
  297.   /*   locations which users or developers don't expected.  In some cases, */
  298.   /*   resource forks start with some offset from the head of a file.  In  */
  299.   /*   other cases, the actual resource fork is stored in file different   */
  300.   /*   from what the user specifies.  If this option is activated,         */
  301.   /*   FreeType tries to guess whether such offsets or different file      */
  302.   /*   names must be used.                                                 */
  303.   /*                                                                       */
  304.   /*   Note that normal, direct access of resource forks is controlled via */
  305.   /*   the FT_CONFIG_OPTION_MAC_FONTS option.                              */
  306.   /*                                                                       */
  307. #ifdef FT_CONFIG_OPTION_MAC_FONTS
  308. #define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
  309. #endif
  310.  
  311.  
  312.   /*************************************************************************/
  313.   /*                                                                       */
  314.   /* Allow the use of FT_Incremental_Interface to load typefaces that      */
  315.   /* contain no glyph data, but supply it via a callback function.         */
  316.   /* This is required by clients supporting document formats which         */
  317.   /* supply font data incrementally as the document is parsed, such        */
  318.   /* as the Ghostscript interpreter for the PostScript language.           */
  319.   /*                                                                       */
  320. #define FT_CONFIG_OPTION_INCREMENTAL
  321.  
  322.  
  323.   /*************************************************************************/
  324.   /*                                                                       */
  325.   /* The size in bytes of the render pool used by the scan-line converter  */
  326.   /* to do all of its work.                                                */
  327.   /*                                                                       */
  328.   /* This must be greater than 4KByte if you use FreeType to rasterize     */
  329.   /* glyphs; otherwise, you may set it to zero to avoid unnecessary        */
  330.   /* allocation of the render pool.                                        */
  331.   /*                                                                       */
  332. #define FT_RENDER_POOL_SIZE  16384L
  333.  
  334.  
  335.   /*************************************************************************/
  336.   /*                                                                       */
  337.   /* FT_MAX_MODULES                                                        */
  338.   /*                                                                       */
  339.   /*   The maximum number of modules that can be registered in a single    */
  340.   /*   FreeType library object.  32 is the default.                        */
  341.   /*                                                                       */
  342. #define FT_MAX_MODULES  32
  343.  
  344.  
  345.   /*************************************************************************/
  346.   /*                                                                       */
  347.   /* Debug level                                                           */
  348.   /*                                                                       */
  349.   /*   FreeType can be compiled in debug or trace mode.  In debug mode,    */
  350.   /*   errors are reported through the `ftdebug' component.  In trace      */
  351.   /*   mode, additional messages are sent to the standard output during    */
  352.   /*   execution.                                                          */
  353.   /*                                                                       */
  354.   /*   Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode.     */
  355.   /*   Define FT_DEBUG_LEVEL_TRACE to build it in trace mode.              */
  356.   /*                                                                       */
  357.   /*   Don't define any of these macros to compile in `release' mode!      */
  358.   /*                                                                       */
  359.   /*   Do not #undef these macros here since the build system might define */
  360.   /*   them for certain configurations only.                               */
  361.   /*                                                                       */
  362. /* #define FT_DEBUG_LEVEL_ERROR */
  363. /* #define FT_DEBUG_LEVEL_TRACE */
  364.  
  365.  
  366.   /*************************************************************************/
  367.   /*                                                                       */
  368.   /* Memory Debugging                                                      */
  369.   /*                                                                       */
  370.   /*   FreeType now comes with an integrated memory debugger that is       */
  371.   /*   capable of detecting simple errors like memory leaks or double      */
  372.   /*   deletes.  To compile it within your build of the library, you       */
  373.   /*   should define FT_DEBUG_MEMORY here.                                 */
  374.   /*                                                                       */
  375.   /*   Note that the memory debugger is only activated at runtime when     */
  376.   /*   when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
  377.   /*                                                                       */
  378.   /*   Do not #undef this macro here since the build system might define   */
  379.   /*   it for certain configurations only.                                 */
  380.   /*                                                                       */
  381. /* #define FT_DEBUG_MEMORY */
  382.  
  383.  
  384.   /*************************************************************************/
  385.   /*                                                                       */
  386.   /* Module errors                                                         */
  387.   /*                                                                       */
  388.   /*   If this macro is set (which is _not_ the default), the higher byte  */
  389.   /*   of an error code gives the module in which the error has occurred,  */
  390.   /*   while the lower byte is the real error code.                        */
  391.   /*                                                                       */
  392.   /*   Setting this macro makes sense for debugging purposes only, since   */
  393.   /*   it would break source compatibility of certain programs that use    */
  394.   /*   FreeType 2.                                                         */
  395.   /*                                                                       */
  396.   /*   More details can be found in the files ftmoderr.h and fterrors.h.   */
  397.   /*                                                                       */
  398. #undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
  399.  
  400.  
  401.   /*************************************************************************/
  402.   /*                                                                       */
  403.   /* Position Independent Code                                             */
  404.   /*                                                                       */
  405.   /*   If this macro is set (which is _not_ the default), FreeType2 will   */
  406.   /*   avoid creating constants that require address fixups.  Instead the  */
  407.   /*   constants will be moved into a struct and additional intialization  */
  408.   /*   code will be used.                                                  */
  409.   /*                                                                       */
  410.   /*   Setting this macro is needed for systems that prohibit address      */
  411.   /*   fixups, such as BREW.                                               */
  412.   /*                                                                       */
  413. /* #define FT_CONFIG_OPTION_PIC */
  414.  
  415.  
  416.   /*************************************************************************/
  417.   /*************************************************************************/
  418.   /****                                                                 ****/
  419.   /****        S F N T   D R I V E R    C O N F I G U R A T I O N       ****/
  420.   /****                                                                 ****/
  421.   /*************************************************************************/
  422.   /*************************************************************************/
  423.  
  424.  
  425.   /*************************************************************************/
  426.   /*                                                                       */
  427.   /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support       */
  428.   /* embedded bitmaps in all formats using the SFNT module (namely         */
  429.   /* TrueType & OpenType).                                                 */
  430.   /*                                                                       */
  431. #define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
  432.  
  433.  
  434.   /*************************************************************************/
  435.   /*                                                                       */
  436.   /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to    */
  437.   /* load and enumerate the glyph Postscript names in a TrueType or        */
  438.   /* OpenType file.                                                        */
  439.   /*                                                                       */
  440.   /* Note that when you do not compile the `PSNames' module by undefining  */
  441.   /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will   */
  442.   /* contain additional code used to read the PS Names table from a font.  */
  443.   /*                                                                       */
  444.   /* (By default, the module uses `PSNames' to extract glyph names.)       */
  445.   /*                                                                       */
  446. #define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
  447.  
  448.  
  449.   /*************************************************************************/
  450.   /*                                                                       */
  451.   /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to       */
  452.   /* access the internal name table in a SFNT-based format like TrueType   */
  453.   /* or OpenType.  The name table contains various strings used to         */
  454.   /* describe the font, like family name, copyright, version, etc.  It     */
  455.   /* does not contain any glyph name though.                               */
  456.   /*                                                                       */
  457.   /* Accessing SFNT names is done through the functions declared in        */
  458.   /* `freetype/ftsnames.h'.                                                */
  459.   /*                                                                       */
  460. #define TT_CONFIG_OPTION_SFNT_NAMES
  461.  
  462.  
  463.   /*************************************************************************/
  464.   /*                                                                       */
  465.   /* TrueType CMap support                                                 */
  466.   /*                                                                       */
  467.   /*   Here you can fine-tune which TrueType CMap table format shall be    */
  468.   /*   supported.                                                          */
  469. #define TT_CONFIG_CMAP_FORMAT_0
  470. #define TT_CONFIG_CMAP_FORMAT_2
  471. #define TT_CONFIG_CMAP_FORMAT_4
  472. #define TT_CONFIG_CMAP_FORMAT_6
  473. #define TT_CONFIG_CMAP_FORMAT_8
  474. #define TT_CONFIG_CMAP_FORMAT_10
  475. #define TT_CONFIG_CMAP_FORMAT_12
  476. #define TT_CONFIG_CMAP_FORMAT_13
  477. #define TT_CONFIG_CMAP_FORMAT_14
  478.  
  479.  
  480.   /*************************************************************************/
  481.   /*************************************************************************/
  482.   /****                                                                 ****/
  483.   /****    T R U E T Y P E   D R I V E R    C O N F I G U R A T I O N   ****/
  484.   /****                                                                 ****/
  485.   /*************************************************************************/
  486.   /*************************************************************************/
  487.  
  488.   /*************************************************************************/
  489.   /*                                                                       */
  490.   /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile   */
  491.   /* a bytecode interpreter in the TrueType driver.                        */
  492.   /*                                                                       */
  493.   /* By undefining this, you will only compile the code necessary to load  */
  494.   /* TrueType glyphs without hinting.                                      */
  495.   /*                                                                       */
  496.   /*   Do not #undef this macro here, since the build system might         */
  497.   /*   define it for certain configurations only.                          */
  498.   /*                                                                       */
  499. #define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
  500.  
  501.  
  502.   /*************************************************************************/
  503.   /*                                                                       */
  504.   /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version  */
  505.   /* of the TrueType bytecode interpreter is used that doesn't implement   */
  506.   /* any of the patented opcodes and algorithms.  The patents related to   */
  507.   /* TrueType hinting have expired worldwide since May 2010; this option   */
  508.   /* is now deprecated.                                                    */
  509.   /*                                                                       */
  510.   /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored*  */
  511.   /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words,  */
  512.   /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or                */
  513.   /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time.    */
  514.   /*                                                                       */
  515.   /* This macro is only useful for a small number of font files (mostly    */
  516.   /* for Asian scripts) that require bytecode interpretation to properly   */
  517.   /* load glyphs.  For all other fonts, this produces unpleasant results,  */
  518.   /* thus the unpatented interpreter is never used to load glyphs from     */
  519.   /* TrueType fonts unless one of the following two options is used.       */
  520.   /*                                                                       */
  521.   /*   - The unpatented interpreter is explicitly activated by the user    */
  522.   /*     through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag         */
  523.   /*     when opening the FT_Face.                                         */
  524.   /*                                                                       */
  525.   /*   - FreeType detects that the FT_Face corresponds to one of the       */
  526.   /*     `trick' fonts (e.g., `Mingliu') it knows about.  The font engine  */
  527.   /*     contains a hard-coded list of font names and other matching       */
  528.   /*     parameters (see function `tt_face_init' in file                   */
  529.   /*     `src/truetype/ttobjs.c').                                         */
  530.   /*                                                                       */
  531.   /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
  532.   /*                                                                       */
  533.   /*   {                                                                   */
  534.   /*     FT_Parameter  parameter;                                          */
  535.   /*     FT_Open_Args  open_args;                                          */
  536.   /*                                                                       */
  537.   /*                                                                       */
  538.   /*     parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING;                  */
  539.   /*                                                                       */
  540.   /*     open_args.flags      = FT_OPEN_PATHNAME | FT_OPEN_PARAMS;         */
  541.   /*     open_args.pathname   = my_font_pathname;                          */
  542.   /*     open_args.num_params = 1;                                         */
  543.   /*     open_args.params     = &parameter;                                */
  544.   /*                                                                       */
  545.   /*     error = FT_Open_Face( library, &open_args, index, &face );        */
  546.   /*     ...                                                               */
  547.   /*   }                                                                   */
  548.   /*                                                                       */
  549. /* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
  550.  
  551.  
  552.   /*************************************************************************/
  553.   /*                                                                       */
  554.   /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType    */
  555.   /* bytecode interpreter with a huge switch statement, rather than a call */
  556.   /* table.  This results in smaller and faster code for a number of       */
  557.   /* architectures.                                                        */
  558.   /*                                                                       */
  559.   /* Note however that on some compiler/processor combinations, undefining */
  560.   /* this macro will generate faster, though larger, code.                 */
  561.   /*                                                                       */
  562. #define TT_CONFIG_OPTION_INTERPRETER_SWITCH
  563.  
  564.  
  565.   /*************************************************************************/
  566.   /*                                                                       */
  567.   /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the        */
  568.   /* TrueType glyph loader to use Apple's definition of how to handle      */
  569.   /* component offsets in composite glyphs.                                */
  570.   /*                                                                       */
  571.   /* Apple and MS disagree on the default behavior of component offsets    */
  572.   /* in composites.  Apple says that they should be scaled by the scaling  */
  573.   /* factors in the transformation matrix (roughly, it's more complex)     */
  574.   /* while MS says they should not.  OpenType defines two bits in the      */
  575.   /* composite flags array which can be used to disambiguate, but old      */
  576.   /* fonts will not have them.                                             */
  577.   /*                                                                       */
  578.   /*   http://partners.adobe.com/asn/developer/opentype/glyf.html          */
  579.   /*   http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html                 */
  580.   /*                                                                       */
  581. #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
  582.  
  583.  
  584.   /*************************************************************************/
  585.   /*                                                                       */
  586.   /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include         */
  587.   /* support for Apple's distortable font technology (fvar, gvar, cvar,    */
  588.   /* and avar tables).  This has many similarities to Type 1 Multiple      */
  589.   /* Masters support.                                                      */
  590.   /*                                                                       */
  591. #define TT_CONFIG_OPTION_GX_VAR_SUPPORT
  592.  
  593.  
  594.   /*************************************************************************/
  595.   /*                                                                       */
  596.   /* Define TT_CONFIG_OPTION_BDF if you want to include support for        */
  597.   /* an embedded `BDF ' table within SFNT-based bitmap formats.            */
  598.   /*                                                                       */
  599. #define TT_CONFIG_OPTION_BDF
  600.  
  601.  
  602.   /*************************************************************************/
  603.   /*************************************************************************/
  604.   /****                                                                 ****/
  605.   /****      T Y P E 1   D R I V E R    C O N F I G U R A T I O N       ****/
  606.   /****                                                                 ****/
  607.   /*************************************************************************/
  608.   /*************************************************************************/
  609.  
  610.  
  611.   /*************************************************************************/
  612.   /*                                                                       */
  613.   /* T1_MAX_DICT_DEPTH is the maximal depth of nest dictionaries and       */
  614.   /* arrays in the Type 1 stream (see t1load.c).  A minimum of 4 is        */
  615.   /* required.                                                             */
  616.   /*                                                                       */
  617. #define T1_MAX_DICT_DEPTH  5
  618.  
  619.  
  620.   /*************************************************************************/
  621.   /*                                                                       */
  622.   /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine   */
  623.   /* calls during glyph loading.                                           */
  624.   /*                                                                       */
  625. #define T1_MAX_SUBRS_CALLS  16
  626.  
  627.  
  628.   /*************************************************************************/
  629.   /*                                                                       */
  630.   /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity.  A     */
  631.   /* minimum of 16 is required.                                            */
  632.   /*                                                                       */
  633.   /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
  634.   /*                                                                       */
  635. #define T1_MAX_CHARSTRINGS_OPERANDS  256
  636.  
  637.  
  638.   /*************************************************************************/
  639.   /*                                                                       */
  640.   /* Define this configuration macro if you want to prevent the            */
  641.   /* compilation of `t1afm', which is in charge of reading Type 1 AFM      */
  642.   /* files into an existing face.  Note that if set, the T1 driver will be */
  643.   /* unable to produce kerning distances.                                  */
  644.   /*                                                                       */
  645. #undef T1_CONFIG_OPTION_NO_AFM
  646.  
  647.  
  648.   /*************************************************************************/
  649.   /*                                                                       */
  650.   /* Define this configuration macro if you want to prevent the            */
  651.   /* compilation of the Multiple Masters font support in the Type 1        */
  652.   /* driver.                                                               */
  653.   /*                                                                       */
  654. #undef T1_CONFIG_OPTION_NO_MM_SUPPORT
  655.  
  656.  
  657.   /*************************************************************************/
  658.   /*************************************************************************/
  659.   /****                                                                 ****/
  660.   /****    A U T O F I T   M O D U L E    C O N F I G U R A T I O N     ****/
  661.   /****                                                                 ****/
  662.   /*************************************************************************/
  663.   /*************************************************************************/
  664.  
  665.  
  666.   /*************************************************************************/
  667.   /*                                                                       */
  668.   /* Compile autofit module with CJK (Chinese, Japanese, Korean) script    */
  669.   /* support.                                                              */
  670.   /*                                                                       */
  671. #define AF_CONFIG_OPTION_CJK
  672.  
  673.   /*************************************************************************/
  674.   /*                                                                       */
  675.   /* Compile autofit module with Indic script support.                     */
  676.   /*                                                                       */
  677. #define AF_CONFIG_OPTION_INDIC
  678.  
  679.   /* */
  680.  
  681.  
  682.   /*
  683.    * Define this variable if you want to keep the layout of internal
  684.    * structures that was used prior to FreeType 2.2.  This also compiles in
  685.    * a few obsolete functions to avoid linking problems on typical Unix
  686.    * distributions.
  687.    *
  688.    * For embedded systems or building a new distribution from scratch, it
  689.    * is recommended to disable the macro since it reduces the library's code
  690.    * size and activates a few memory-saving optimizations as well.
  691.    */
  692. #define FT_CONFIG_OPTION_OLD_INTERNALS
  693.  
  694.  
  695.   /*
  696.    *  To detect legacy cache-lookup call from a rogue client (<= 2.1.7),
  697.    *  we restrict the number of charmaps in a font.  The current API of
  698.    *  FTC_CMapCache_Lookup() takes cmap_index & charcode, but old API
  699.    *  takes charcode only.  To determine the passed value is for cmap_index
  700.    *  or charcode, the possible cmap_index is restricted not to exceed
  701.    *  the minimum possible charcode by a rogue client.  It is also very
  702.    *  unlikely that a rogue client is interested in Unicode values 0 to 15.
  703.    *
  704.    *  NOTE: The original threshold was 4 deduced from popular number of
  705.    *        cmap subtables in UCS-4 TrueType fonts, but now it is not
  706.    *        irregular for OpenType fonts to have more than 4 subtables,
  707.    *        because variation selector subtables are available for Apple
  708.    *        and Microsoft platforms.
  709.    */
  710.  
  711. #ifdef FT_CONFIG_OPTION_OLD_INTERNALS
  712. #define FT_MAX_CHARMAP_CACHEABLE 15
  713. #endif
  714.  
  715.  
  716.   /*
  717.    * This macro is defined if either unpatented or native TrueType
  718.    * hinting is requested by the definitions above.
  719.    */
  720. #ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
  721. #define  TT_USE_BYTECODE_INTERPRETER
  722. #undef   TT_CONFIG_OPTION_UNPATENTED_HINTING
  723. #elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
  724. #define  TT_USE_BYTECODE_INTERPRETER
  725. #endif
  726.  
  727. FT_END_HEADER
  728.  
  729.  
  730. #endif /* __FTOPTION_H__ */
  731.  
  732.  
  733. /* END */
  734.